2 # SATA/PATA driver configuration
5 config HAVE_PATA_PLATFORM
8 This is an internal configuration node for any machine that
9 uses pata-platform driver to enable the relevant driver in the
10 configuration structure without having to submit endless patches
11 to update the PATA_PLATFORM entry.
14 tristate "Serial ATA and Parallel ATA drivers (libata)"
17 depends on !(M32R || M68K || S390) || BROKEN
20 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
21 any other ATA device under Linux, say Y and make sure that you know
22 the name of your ATA host adapter (the card inside your computer
23 that "speaks" the ATA protocol, also called ATA controller),
24 because you will be asked for it.
26 NOTE: ATA enables basic SCSI support; *however*,
27 'SCSI disk support', 'SCSI tape support', or
28 'SCSI CDROM support' may also be needed,
29 depending on your hardware configuration.
33 config ATA_NONSTANDARD
37 config ATA_VERBOSE_ERROR
38 bool "Verbose ATA error reporting"
41 This option adds parsing of ATA command descriptions and error bits
42 in libata kernel output, making it easier to interpret.
43 This option will enlarge the kernel by approx. 6KB. Disable it only
44 if kernel size is more important than ease of debugging.
49 bool "ATA ACPI Support"
50 depends on ACPI && PCI
53 This option adds support for ATA-related ACPI objects.
54 These ACPI objects add the ability to retrieve taskfiles
55 from the ACPI BIOS and write them to the disk controller.
56 These objects may be related to performance, security,
57 power management, or other areas.
58 You can disable this at kernel boot time by using the
59 option libata.noacpi=1
62 bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
63 depends on ATA_ACPI && PM_RUNTIME
66 This option adds support for SATA Zero Power Optical Disc
67 Drive (ZPODD). It requires both the ODD and the platform
68 support, and if enabled, will automatically power on/off the
69 ODD when certain condition is satisfied. This does not impact
70 end user's experience of the ODD, only power is saved when
71 the ODD is not in use (i.e. no disc inside).
76 bool "SATA Port Multiplier support"
79 This option adds support for SATA Port Multipliers
80 (the SATA version of an ethernet hub, or SAS expander).
82 comment "Controllers with non-SFF native interface"
85 tristate "AHCI SATA support"
88 This option enables support for AHCI Serial ATA.
92 config SATA_AHCI_PLATFORM
93 tristate "Platform AHCI SATA support"
95 This option enables support for Platform AHCI Serial ATA
101 tristate "DaVinci DA850 AHCI SATA support"
102 depends on ARCH_DAVINCI_DA850
104 This option enables support for the DaVinci DA850 SoC's
110 tristate "ST AHCI SATA support"
113 This option enables support for ST AHCI SATA controller.
118 tristate "Freescale i.MX AHCI SATA support"
119 depends on MFD_SYSCON
121 This option enables support for the Freescale i.MX SoC's
127 tristate "Allwinner sunxi AHCI SATA support"
128 depends on ARCH_SUNXI
130 This option enables support for the Allwinner sunxi SoC's
136 tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
137 depends on ARM64 || COMPILE_TEST
140 This option enables support for APM X-Gene SoC SATA host controller.
143 tristate "Freescale 3.0Gbps SATA support"
146 This option enables support for Freescale 3.0Gbps SATA controller.
147 It can be found on MPC837x and MPC8315.
152 tristate "Initio 162x SATA support (Very Experimental)"
155 This option enables support for Initio 162x Serial ATA.
157 config SATA_ACARD_AHCI
158 tristate "ACard AHCI variant (ATP 8620)"
161 This option enables support for Acard.
166 tristate "Silicon Image 3124/3132 SATA support"
169 This option enables support for Silicon Image 3124/3132 Serial ATA.
174 bool "ATA SFF support (for legacy IDE and PATA)"
177 This option adds support for ATA controllers with SFF
178 compliant or similar programming interface.
180 SFF is the legacy IDE interface that has been around since
181 the dawn of time. Almost all PATA controllers have an
182 SFF interface. Many SATA controllers have an SFF interface
183 when configured into a legacy compatibility mode.
185 For users with exclusively modern controllers like AHCI,
186 Silicon Image 3124, or Marvell 6440, you may choose to
187 disable this unneeded SFF support.
193 comment "SFF controllers with custom DMA interface"
196 tristate "Pacific Digital ADMA support"
199 This option enables support for Pacific Digital ADMA controllers
203 config PATA_OCTEON_CF
204 tristate "OCTEON Boot Bus Compact Flash support"
205 depends on CAVIUM_OCTEON_SOC
207 This option enables a polled compact flash driver for use with
208 compact flash cards attached to the OCTEON boot bus.
213 tristate "Pacific Digital SATA QStor support"
216 This option enables support for Pacific Digital Serial ATA QStor.
221 tristate "Promise SATA SX4 support (Experimental)"
224 This option enables support for Promise Serial ATA SX4.
229 bool "ATA BMDMA support"
232 This option adds support for SFF ATA controllers with BMDMA
233 capability. BMDMA stands for bus-master DMA and is the
234 de facto DMA interface for SFF controllers.
240 comment "SATA SFF controllers with BMDMA"
243 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
246 This option enables support for ICH5/6/7/8 Serial ATA
247 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
253 tristate "DesignWare Cores SATA support"
256 This option enables support for the on-chip SATA controller of the
257 AppliedMicro processor 460EX.
261 config SATA_DWC_DEBUG
262 bool "Debugging driver version"
265 This option enables debugging output in the driver.
267 config SATA_DWC_VDEBUG
268 bool "Verbose debug output"
269 depends on SATA_DWC_DEBUG
271 This option enables the taskfile dumping and NCQ debugging.
274 tristate "Calxeda Highbank SATA support"
275 depends on ARCH_HIGHBANK || COMPILE_TEST
277 This option enables support for the Calxeda Highbank SoC's
283 tristate "Marvell SATA support"
284 depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
285 ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
287 This option enables support for the Marvell Serial ATA family.
288 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
289 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
294 tristate "NVIDIA SATA support"
297 This option enables support for NVIDIA Serial ATA.
302 tristate "Promise SATA TX2/TX4 support"
305 This option enables support for Promise Serial ATA TX2/TX4.
310 tristate "Renesas R-Car SATA support"
311 depends on ARCH_SHMOBILE || COMPILE_TEST
313 This option enables support for Renesas R-Car Serial ATA.
318 tristate "Silicon Image SATA support"
321 This option enables support for Silicon Image Serial ATA.
326 tristate "SiS 964/965/966/180 SATA support"
330 This option enables support for SiS Serial ATA on
331 SiS 964/965/966/180 and Parallel ATA on SiS 180.
332 The PATA support for SiS 180 requires additionally to
333 enable the PATA_SIS driver in the config.
337 tristate "ServerWorks Frodo / Apple K2 SATA support"
340 This option enables support for Broadcom/Serverworks/Apple K2
346 tristate "ULi Electronics SATA support"
349 This option enables support for ULi Electronics SATA.
354 tristate "VIA SATA support"
357 This option enables support for VIA Serial ATA.
362 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
365 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
369 comment "PATA SFF controllers with BMDMA"
372 tristate "ALi PATA support"
375 This option enables support for the ALi ATA interfaces
376 found on the many ALi chipsets.
381 tristate "AMD/NVidia PATA support"
384 This option enables support for the AMD and NVidia PATA
385 interfaces found on the chipsets for Athlon/Athlon64.
389 config PATA_ARASAN_CF
390 tristate "ARASAN CompactFlash PATA Controller Support"
391 depends on ARCH_SPEAR13XX || COMPILE_TEST
392 depends on DMADEVICES
395 Say Y here to support the ARASAN CompactFlash PATA controller
398 tristate "ARTOP 6210/6260 PATA support"
401 This option enables support for ARTOP PATA controllers.
406 tristate "ATI PATA support"
409 This option enables support for the ATI ATA interfaces
410 found on the many ATI chipsets.
415 tristate "ARTOP/Acard ATP867X PATA support"
418 This option enables support for ARTOP/Acard ATP867X PATA
424 tristate "Blackfin 54x ATAPI support"
425 depends on BF542 || BF548 || BF549
427 This option enables support for the built-in ATAPI controller on
428 Blackfin 54x family chips.
433 tristate "CMD64x PATA support"
436 This option enables support for the CMD64x series chips
437 except for the CMD640.
442 tristate "CS5510/5520 PATA support"
443 depends on PCI && (X86_32 || COMPILE_TEST)
445 This option enables support for the Cyrix 5510/5520
446 companion chip used with the MediaGX/Geode processor family.
451 tristate "CS5530 PATA support"
452 depends on PCI && (X86_32 || COMPILE_TEST)
454 This option enables support for the Cyrix/NatSemi/AMD CS5530
455 companion chip used with the MediaGX/Geode processor family.
460 tristate "CS5535 PATA support (Experimental)"
461 depends on PCI && X86_32
463 This option enables support for the NatSemi/AMD CS5535
464 companion chip used with the Geode processor family.
469 tristate "CS5536 PATA support"
470 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
472 This option enables support for the AMD CS5536
473 companion chip used with the Geode LX processor family.
478 tristate "Cypress CY82C693 PATA support (Very Experimental)"
481 This option enables support for the Cypress/Contaq CY82C693
482 chipset found in some Alpha systems
487 tristate "EFAR SLC90E66 support"
490 This option enables support for the EFAR SLC90E66
491 IDE controller found on some older machines.
496 tristate "Cirrus Logic EP93xx PATA support"
497 depends on ARCH_EP93XX
499 This option enables support for the PATA controller in
500 the Cirrus Logic EP9312 and EP9315 ARM CPU.
505 tristate "HPT 366/368 PATA support"
508 This option enables support for the HPT 366 and 368
509 PATA controllers via the new ATA layer.
514 tristate "HPT 370/370A/371/372/374/302 PATA support"
517 This option enables support for the majority of the later HPT
518 PATA controllers via the new ATA layer.
523 tristate "HPT 371N/372N/302N PATA support"
526 This option enables support for the N variant HPT PATA
527 controllers via the new ATA layer.
532 tristate "HPT 343/363 PATA support"
535 This option enables support for the HPT 343/363
536 PATA controllers via the new ATA layer
540 config PATA_HPT3X3_DMA
541 bool "HPT 343/363 DMA support"
542 depends on PATA_HPT3X3
544 This option enables DMA support for the HPT343/363
545 controllers. Enable with care as there are still some
546 problems with DMA on this chipset.
549 tristate "Acorn ICS PATA support"
550 depends on ARM && ARCH_ACORN
552 On Acorn systems, say Y here if you wish to use the ICS PATA
553 interface card. This is not required for ICS partition support.
554 If you are unsure, say N to this.
557 tristate "PATA support for Freescale iMX"
560 This option enables support for the PATA host available on Freescale
566 tristate "IT8213 PATA support (Experimental)"
569 This option enables support for the ITE 821 PATA
570 controllers via the new ATA layer.
575 tristate "IT8211/2 PATA support"
578 This option enables support for the ITE 8211 and 8212
579 PATA controllers via the new ATA layer, including RAID
585 tristate "JMicron PATA support"
588 Enable support for the JMicron IDE controller, via the new
594 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
597 Most IDE capable PowerMacs have IDE busses driven by a variant
598 of this controller which is part of the Apple chipset used on
599 most PowerMac models. Some models have multiple busses using
600 different chipsets, though generally, MacIO is one of them.
603 tristate "Marvell PATA support via legacy mode"
606 This option enables limited support for the Marvell 88SE61xx ATA
607 controllers. If you wish to use only the SATA ports then select
608 the AHCI driver alone. If you wish to the use the PATA port or
609 both SATA and PATA include this driver.
614 tristate "Freescale MPC52xx SoC internal IDE"
615 depends on PPC_MPC52xx && PPC_BESTCOMM
616 select PPC_BESTCOMM_ATA
618 This option enables support for integrated IDE controller
619 of the Freescale MPC52xx SoC.
624 tristate "NETCELL Revolution RAID support"
627 This option enables support for the Netcell Revolution RAID
633 tristate "Ninja32/Delkin Cardbus ATA support"
636 This option enables support for the Ninja32, Delkin and
637 possibly other brands of Cardbus ATA adapter
642 tristate "Nat Semi NS87415 PATA support"
645 This option enables support for the National Semiconductor
646 NS87415 PCI-IDE controller.
651 tristate "Intel PATA old PIIX support"
654 This option enables support for early PIIX PATA support.
659 tristate "OPTI FireStar PATA support (Very Experimental)"
662 This option enables DMA/PIO support for the later OPTi
663 controllers found on some old motherboards and in some
669 tristate "Promise PATA 2027x support"
672 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
677 tristate "Older Promise PATA controller support"
680 This option enables support for the Promise 20246, 20262, 20263,
681 20265 and 20267 adapters.
686 tristate "RADISYS 82600 PATA support (Experimental)"
689 This option enables support for the RADISYS 82600
690 PATA controllers via the new ATA layer
695 tristate "RDC PATA support"
698 This option enables basic support for the later RDC PATA controllers
699 controllers via the new ATA layer. For the RDC 1010, you need to
700 enable the IT821X driver instead.
705 tristate "SC1200 PATA support"
706 depends on PCI && (X86_32 || COMPILE_TEST)
708 This option enables support for the NatSemi/AMD SC1200 SoC
709 companion chip used with the Geode processor family.
714 tristate "Toshiba's Cell Reference Set IDE support"
715 depends on PCI && PPC_CELLEB
717 This option enables support for the built-in IDE controller on
718 Toshiba Cell Reference Board.
723 tristate "Intel SCH PATA support"
726 This option enables support for Intel SCH PATA on the Intel
727 SCH (US15W, US15L, UL11L) series host controllers.
731 config PATA_SERVERWORKS
732 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
735 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
736 HT1000 PATA controllers, via the new ATA layer.
741 tristate "CMD / Silicon Image 680 PATA support"
744 This option enables support for CMD / Silicon Image 680 PATA.
749 tristate "SiS PATA support"
752 This option enables support for SiS PATA controllers
757 tristate "Toshiba Piccolo support (Experimental)"
760 Support for the Toshiba Piccolo controllers. Currently only the
761 primary channel is supported by this driver.
766 tristate "Compaq Triflex PATA support"
769 Enable support for the Compaq 'Triflex' IDE controller as found
770 on many Compaq Pentium-Pro systems, via the new ATA layer.
775 tristate "VIA PATA support"
778 This option enables support for the VIA PATA interfaces
779 found on the many VIA chipsets.
784 tristate "PXA DMA-capable PATA support"
787 This option enables support for harddrive attached to PXA CPU's bus.
789 NOTE: This driver utilizes PXA DMA controller, in case your hardware
790 is not capable of doing MWDMA, use pata_platform instead.
795 tristate "Winbond SL82C105 PATA support"
798 This option enables support for SL82C105 PATA devices found in the
799 Netwinder and some other systems
805 comment "PIO-only SFF controllers"
808 tristate "Atmel AVR32 PATA support (Experimental)"
809 depends on AVR32 && PLATFORM_AT32AP
811 This option enables support for the IDE devices on the
812 Atmel AT32AP platform.
817 tristate "PATA support for AT91SAM9260"
818 depends on ARM && ARCH_AT91
820 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
824 config PATA_CMD640_PCI
825 tristate "CMD640 PCI PATA support (Experimental)"
828 This option enables support for the CMD640 PCI IDE
829 interface chip. Only the primary channel is currently
835 tristate "ISA Plug and Play PATA support"
838 This option enables support for ISA plug & play ATA
839 controllers such as those found on old soundcards.
843 config PATA_IXP4XX_CF
844 tristate "IXP4XX Compact Flash support"
845 depends on ARCH_IXP4XX
847 This option enables support for a Compact Flash connected on
848 the ixp4xx expansion bus. This driver had been written for
849 Loft/Avila boards in mind but can work with others.
854 tristate "Intel PATA MPIIX support"
857 This option enables support for MPIIX PATA support.
862 tristate "Nat Semi NS87410 PATA support"
865 This option enables support for the National Semiconductor
866 NS87410 PCI-IDE controller.
871 tristate "OPTI621/6215 PATA support (Very Experimental)"
874 This option enables full PIO support for the early Opti ATA
875 controllers found on some old motherboards.
880 tristate "Palm LifeDrive PATA support"
881 depends on MACH_PALMLD
883 This option enables support for Palm LifeDrive's internal ATA
884 port via the new ATA layer.
889 tristate "PCMCIA PATA support"
892 This option enables support for PCMCIA ATA interfaces, including
893 compact flash card adapters via the new ATA layer.
898 tristate "Generic platform device PATA support"
899 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
901 This option enables support for generic directly connected ATA
902 devices commonly found on embedded systems.
906 config PATA_OF_PLATFORM
907 tristate "OpenFirmware platform device PATA support"
908 depends on PATA_PLATFORM && OF
910 This option enables support for generic directly connected ATA
911 devices commonly found on embedded systems with OpenFirmware
917 tristate "QDI VLB PATA support"
921 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
924 tristate "RouterBoard 532 PATA CompactFlash support"
925 depends on MIKROTIK_RB532
927 This option enables support for the RouterBoard 532
928 PATA CompactFlash controller.
933 tristate "PC Tech RZ1000 PATA support"
936 This option enables basic support for the PC Tech RZ1000/1
937 PATA controllers via the new ATA layer
941 config PATA_SAMSUNG_CF
942 tristate "Samsung SoC PATA support"
943 depends on SAMSUNG_DEV_IDE
945 This option enables basic support for Samsung's S3C/S5P board
946 PATA controllers via the new ATA layer
950 config PATA_WINBOND_VLB
951 tristate "Winbond W83759A VLB PATA support (Experimental)"
955 Support for the Winbond W83759A controller on Vesa Local Bus
958 comment "Generic fallback / legacy drivers"
961 tristate "ACPI firmware driver for PATA"
962 depends on ATA_ACPI && ATA_BMDMA
964 This option enables an ACPI method driver which drives
965 motherboard PATA controller interfaces through the ACPI
966 firmware in the BIOS. This driver can sometimes handle
967 otherwise unsupported hardware.
970 tristate "Generic ATA support"
971 depends on PCI && ATA_BMDMA
973 This option enables support for generic BIOS configured
974 ATA controllers via the new ATA layer
979 tristate "Legacy ISA PATA support (Experimental)"
980 depends on (ISA || PCI)
982 This option enables support for ISA/VLB/PCI bus legacy PATA
983 ports and allows them to be accessed via the new ATA layer.