3 * Bluetooth HCI UART driver for Broadcom devices
5 * Copyright (C) 2015 Intel Corporation
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/kernel.h>
25 #include <linux/errno.h>
26 #include <linux/skbuff.h>
27 #include <linux/firmware.h>
28 #include <linux/module.h>
29 #include <linux/acpi.h>
30 #include <linux/platform_device.h>
31 #include <linux/clk.h>
32 #include <linux/gpio/consumer.h>
33 #include <linux/tty.h>
34 #include <linux/interrupt.h>
35 #include <linux/dmi.h>
36 #include <linux/pm_runtime.h>
38 #include <net/bluetooth/bluetooth.h>
39 #include <net/bluetooth/hci_core.h>
44 #define BCM_LM_DIAG_PKT 0x07
45 #define BCM_LM_DIAG_SIZE 63
47 #define BCM_AUTOSUSPEND_DELAY 5000 /* default autosleep delay */
50 struct list_head list;
52 struct platform_device *pdev;
55 struct gpio_desc *device_wakeup;
56 struct gpio_desc *shutdown;
67 bool is_suspended; /* suspend/resume flag */
72 struct sk_buff *rx_skb;
73 struct sk_buff_head txq;
75 struct bcm_device *dev;
78 /* List of BCM BT UART devices */
79 static DEFINE_MUTEX(bcm_device_lock);
80 static LIST_HEAD(bcm_device_list);
82 static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
84 struct hci_dev *hdev = hu->hdev;
86 struct bcm_update_uart_baud_rate param;
88 if (speed > 3000000) {
89 struct bcm_write_uart_clock_setting clock;
91 clock.type = BCM_UART_CLOCK_48MHZ;
93 bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type);
95 /* This Broadcom specific command changes the UART's controller
96 * clock for baud rate > 3000000.
98 skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
100 int err = PTR_ERR(skb);
101 bt_dev_err(hdev, "BCM: failed to write clock (%d)",
109 bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed);
111 param.zero = cpu_to_le16(0);
112 param.baud_rate = cpu_to_le32(speed);
114 /* This Broadcom specific command changes the UART's controller baud
117 skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), ¶m,
120 int err = PTR_ERR(skb);
121 bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)",
131 /* bcm_device_exists should be protected by bcm_device_lock */
132 static bool bcm_device_exists(struct bcm_device *device)
136 list_for_each(p, &bcm_device_list) {
137 struct bcm_device *dev = list_entry(p, struct bcm_device, list);
146 static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
148 if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled)
149 clk_prepare_enable(dev->clk);
151 gpiod_set_value(dev->shutdown, powered);
152 gpiod_set_value(dev->device_wakeup, powered);
154 if (!powered && !IS_ERR(dev->clk) && dev->clk_enabled)
155 clk_disable_unprepare(dev->clk);
157 dev->clk_enabled = powered;
163 static irqreturn_t bcm_host_wake(int irq, void *data)
165 struct bcm_device *bdev = data;
167 bt_dev_dbg(bdev, "Host wake IRQ");
169 pm_runtime_get(&bdev->pdev->dev);
170 pm_runtime_mark_last_busy(&bdev->pdev->dev);
171 pm_runtime_put_autosuspend(&bdev->pdev->dev);
176 static int bcm_request_irq(struct bcm_data *bcm)
178 struct bcm_device *bdev = bcm->dev;
181 /* If this is not a platform device, do not enable PM functionalities */
182 mutex_lock(&bcm_device_lock);
183 if (!bcm_device_exists(bdev)) {
189 err = devm_request_irq(&bdev->pdev->dev, bdev->irq,
190 bcm_host_wake, IRQF_TRIGGER_RISING,
195 device_init_wakeup(&bdev->pdev->dev, true);
197 pm_runtime_set_autosuspend_delay(&bdev->pdev->dev,
198 BCM_AUTOSUSPEND_DELAY);
199 pm_runtime_use_autosuspend(&bdev->pdev->dev);
200 pm_runtime_set_active(&bdev->pdev->dev);
201 pm_runtime_enable(&bdev->pdev->dev);
205 mutex_unlock(&bcm_device_lock);
210 static const struct bcm_set_sleep_mode default_sleep_params = {
211 .sleep_mode = 1, /* 0=Disabled, 1=UART, 2=Reserved, 3=USB */
212 .idle_host = 2, /* idle threshold HOST, in 300ms */
213 .idle_dev = 2, /* idle threshold device, in 300ms */
214 .bt_wake_active = 1, /* BT_WAKE active mode: 1 = high, 0 = low */
215 .host_wake_active = 0, /* HOST_WAKE active mode: 1 = high, 0 = low */
216 .allow_host_sleep = 1, /* Allow host sleep in SCO flag */
217 .combine_modes = 1, /* Combine sleep and LPM flag */
218 .tristate_control = 0, /* Allow tri-state control of UART tx flag */
219 /* Irrelevant USB flags */
221 .usb_resume_timeout = 0,
222 .pulsed_host_wake = 0,
226 static int bcm_setup_sleep(struct hci_uart *hu)
228 struct bcm_data *bcm = hu->priv;
230 struct bcm_set_sleep_mode sleep_params = default_sleep_params;
232 sleep_params.host_wake_active = !bcm->dev->irq_polarity;
234 skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params),
235 &sleep_params, HCI_INIT_TIMEOUT);
237 int err = PTR_ERR(skb);
238 bt_dev_err(hu->hdev, "Sleep VSC failed (%d)", err);
243 bt_dev_dbg(hu->hdev, "Set Sleep Parameters VSC succeeded");
248 static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; }
249 static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; }
252 static int bcm_set_diag(struct hci_dev *hdev, bool enable)
254 struct hci_uart *hu = hci_get_drvdata(hdev);
255 struct bcm_data *bcm = hu->priv;
258 if (!test_bit(HCI_RUNNING, &hdev->flags))
261 skb = bt_skb_alloc(3, GFP_KERNEL);
265 *skb_put(skb, 1) = BCM_LM_DIAG_PKT;
266 *skb_put(skb, 1) = 0xf0;
267 *skb_put(skb, 1) = enable;
269 skb_queue_tail(&bcm->txq, skb);
270 hci_uart_tx_wakeup(hu);
275 static int bcm_open(struct hci_uart *hu)
277 struct bcm_data *bcm;
280 bt_dev_dbg(hu->hdev, "hu %p", hu);
282 bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
286 skb_queue_head_init(&bcm->txq);
293 mutex_lock(&bcm_device_lock);
294 list_for_each(p, &bcm_device_list) {
295 struct bcm_device *dev = list_entry(p, struct bcm_device, list);
297 /* Retrieve saved bcm_device based on parent of the
298 * platform device (saved during device probe) and
299 * parent of tty device used by hci_uart
301 if (hu->tty->dev->parent == dev->pdev->dev.parent) {
303 hu->init_speed = dev->init_speed;
307 bcm_gpio_set_power(bcm->dev, true);
312 mutex_unlock(&bcm_device_lock);
317 static int bcm_close(struct hci_uart *hu)
319 struct bcm_data *bcm = hu->priv;
320 struct bcm_device *bdev = bcm->dev;
322 bt_dev_dbg(hu->hdev, "hu %p", hu);
324 /* Protect bcm->dev against removal of the device or driver */
325 mutex_lock(&bcm_device_lock);
326 if (bcm_device_exists(bdev)) {
327 bcm_gpio_set_power(bdev, false);
329 pm_runtime_disable(&bdev->pdev->dev);
330 pm_runtime_set_suspended(&bdev->pdev->dev);
332 if (device_can_wakeup(&bdev->pdev->dev)) {
333 devm_free_irq(&bdev->pdev->dev, bdev->irq, bdev);
334 device_init_wakeup(&bdev->pdev->dev, false);
340 mutex_unlock(&bcm_device_lock);
342 skb_queue_purge(&bcm->txq);
343 kfree_skb(bcm->rx_skb);
350 static int bcm_flush(struct hci_uart *hu)
352 struct bcm_data *bcm = hu->priv;
354 bt_dev_dbg(hu->hdev, "hu %p", hu);
356 skb_queue_purge(&bcm->txq);
361 static int bcm_setup(struct hci_uart *hu)
363 struct bcm_data *bcm = hu->priv;
365 const struct firmware *fw;
369 bt_dev_dbg(hu->hdev, "hu %p", hu);
371 hu->hdev->set_diag = bcm_set_diag;
372 hu->hdev->set_bdaddr = btbcm_set_bdaddr;
374 err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name));
378 err = request_firmware(&fw, fw_name, &hu->hdev->dev);
380 bt_dev_info(hu->hdev, "BCM: Patch %s not found", fw_name);
384 err = btbcm_patchram(hu->hdev, fw);
386 bt_dev_info(hu->hdev, "BCM: Patch failed (%d)", err);
390 /* Init speed if any */
392 speed = hu->init_speed;
393 else if (hu->proto->init_speed)
394 speed = hu->proto->init_speed;
399 hci_uart_set_baudrate(hu, speed);
401 /* Operational speed if any */
403 speed = hu->oper_speed;
404 else if (hu->proto->oper_speed)
405 speed = hu->proto->oper_speed;
410 err = bcm_set_baudrate(hu, speed);
412 hci_uart_set_baudrate(hu, speed);
416 release_firmware(fw);
418 err = btbcm_finalize(hu->hdev);
422 err = bcm_request_irq(bcm);
424 err = bcm_setup_sleep(hu);
429 #define BCM_RECV_LM_DIAG \
430 .type = BCM_LM_DIAG_PKT, \
431 .hlen = BCM_LM_DIAG_SIZE, \
434 .maxlen = BCM_LM_DIAG_SIZE
436 static const struct h4_recv_pkt bcm_recv_pkts[] = {
437 { H4_RECV_ACL, .recv = hci_recv_frame },
438 { H4_RECV_SCO, .recv = hci_recv_frame },
439 { H4_RECV_EVENT, .recv = hci_recv_frame },
440 { BCM_RECV_LM_DIAG, .recv = hci_recv_diag },
443 static int bcm_recv(struct hci_uart *hu, const void *data, int count)
445 struct bcm_data *bcm = hu->priv;
447 if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
450 bcm->rx_skb = h4_recv_buf(hu->hdev, bcm->rx_skb, data, count,
451 bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts));
452 if (IS_ERR(bcm->rx_skb)) {
453 int err = PTR_ERR(bcm->rx_skb);
454 bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
457 } else if (!bcm->rx_skb) {
458 /* Delay auto-suspend when receiving completed packet */
459 mutex_lock(&bcm_device_lock);
460 if (bcm->dev && bcm_device_exists(bcm->dev)) {
461 pm_runtime_get(&bcm->dev->pdev->dev);
462 pm_runtime_mark_last_busy(&bcm->dev->pdev->dev);
463 pm_runtime_put_autosuspend(&bcm->dev->pdev->dev);
465 mutex_unlock(&bcm_device_lock);
471 static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb)
473 struct bcm_data *bcm = hu->priv;
475 bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
477 /* Prepend skb with frame type */
478 memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
479 skb_queue_tail(&bcm->txq, skb);
484 static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
486 struct bcm_data *bcm = hu->priv;
487 struct sk_buff *skb = NULL;
488 struct bcm_device *bdev = NULL;
490 mutex_lock(&bcm_device_lock);
492 if (bcm_device_exists(bcm->dev)) {
494 pm_runtime_get_sync(&bdev->pdev->dev);
495 /* Shall be resumed here */
498 skb = skb_dequeue(&bcm->txq);
501 pm_runtime_mark_last_busy(&bdev->pdev->dev);
502 pm_runtime_put_autosuspend(&bdev->pdev->dev);
505 mutex_unlock(&bcm_device_lock);
511 static int bcm_suspend_device(struct device *dev)
513 struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
515 bt_dev_dbg(bdev, "");
517 if (!bdev->is_suspended && bdev->hu) {
518 hci_uart_set_flow_control(bdev->hu, true);
520 /* Once this returns, driver suspends BT via GPIO */
521 bdev->is_suspended = true;
524 /* Suspend the device */
525 if (bdev->device_wakeup) {
526 gpiod_set_value(bdev->device_wakeup, false);
527 bt_dev_dbg(bdev, "suspend, delaying 15 ms");
534 static int bcm_resume_device(struct device *dev)
536 struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
538 bt_dev_dbg(bdev, "");
540 if (bdev->device_wakeup) {
541 gpiod_set_value(bdev->device_wakeup, true);
542 bt_dev_dbg(bdev, "resume, delaying 15 ms");
546 /* When this executes, the device has woken up already */
547 if (bdev->is_suspended && bdev->hu) {
548 bdev->is_suspended = false;
550 hci_uart_set_flow_control(bdev->hu, false);
557 #ifdef CONFIG_PM_SLEEP
558 /* Platform suspend callback */
559 static int bcm_suspend(struct device *dev)
561 struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
564 bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
566 /* bcm_suspend can be called at any time as long as platform device is
567 * bound, so it should use bcm_device_lock to protect access to hci_uart
568 * and device_wake-up GPIO.
570 mutex_lock(&bcm_device_lock);
575 if (pm_runtime_active(dev))
576 bcm_suspend_device(dev);
578 if (device_may_wakeup(&bdev->pdev->dev)) {
579 error = enable_irq_wake(bdev->irq);
581 bt_dev_dbg(bdev, "BCM irq: enabled");
585 mutex_unlock(&bcm_device_lock);
590 /* Platform resume callback */
591 static int bcm_resume(struct device *dev)
593 struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
595 bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
597 /* bcm_resume can be called at any time as long as platform device is
598 * bound, so it should use bcm_device_lock to protect access to hci_uart
599 * and device_wake-up GPIO.
601 mutex_lock(&bcm_device_lock);
606 if (device_may_wakeup(&bdev->pdev->dev)) {
607 disable_irq_wake(bdev->irq);
608 bt_dev_dbg(bdev, "BCM irq: disabled");
611 bcm_resume_device(dev);
614 mutex_unlock(&bcm_device_lock);
616 pm_runtime_disable(dev);
617 pm_runtime_set_active(dev);
618 pm_runtime_enable(dev);
624 static const struct acpi_gpio_params int_last_device_wakeup_gpios = { 0, 0, false };
625 static const struct acpi_gpio_params int_last_shutdown_gpios = { 1, 0, false };
626 static const struct acpi_gpio_params int_last_host_wakeup_gpios = { 2, 0, false };
628 static const struct acpi_gpio_mapping acpi_bcm_int_last_gpios[] = {
629 { "device-wakeup-gpios", &int_last_device_wakeup_gpios, 1 },
630 { "shutdown-gpios", &int_last_shutdown_gpios, 1 },
631 { "host-wakeup-gpios", &int_last_host_wakeup_gpios, 1 },
635 static const struct acpi_gpio_params int_first_host_wakeup_gpios = { 0, 0, false };
636 static const struct acpi_gpio_params int_first_device_wakeup_gpios = { 1, 0, false };
637 static const struct acpi_gpio_params int_first_shutdown_gpios = { 2, 0, false };
639 static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = {
640 { "device-wakeup-gpios", &int_first_device_wakeup_gpios, 1 },
641 { "shutdown-gpios", &int_first_shutdown_gpios, 1 },
642 { "host-wakeup-gpios", &int_first_host_wakeup_gpios, 1 },
647 static u8 acpi_active_low = ACPI_ACTIVE_LOW;
649 /* IRQ polarity of some chipsets are not defined correctly in ACPI table. */
650 static const struct dmi_system_id bcm_wrong_irq_dmi_table[] = {
652 .ident = "Asus T100TA",
654 DMI_EXACT_MATCH(DMI_SYS_VENDOR,
655 "ASUSTeK COMPUTER INC."),
656 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
658 .driver_data = &acpi_active_low,
660 { /* Handle ThinkPad 8 tablets with BCM2E55 chipset ACPI ID */
661 .ident = "Lenovo ThinkPad 8",
663 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
664 DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 8"),
666 .driver_data = &acpi_active_low,
671 static int bcm_resource(struct acpi_resource *ares, void *data)
673 struct bcm_device *dev = data;
674 struct acpi_resource_extended_irq *irq;
675 struct acpi_resource_gpio *gpio;
676 struct acpi_resource_uart_serialbus *sb;
678 switch (ares->type) {
679 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
680 irq = &ares->data.extended_irq;
681 dev->irq_polarity = irq->polarity;
684 case ACPI_RESOURCE_TYPE_GPIO:
685 gpio = &ares->data.gpio;
686 if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT)
687 dev->irq_polarity = gpio->polarity;
690 case ACPI_RESOURCE_TYPE_SERIAL_BUS:
691 sb = &ares->data.uart_serial_bus;
692 if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART)
693 dev->init_speed = sb->default_baud_rate;
700 /* Always tell the ACPI core to skip this resource */
703 #endif /* CONFIG_ACPI */
705 static int bcm_platform_probe(struct bcm_device *dev)
707 struct platform_device *pdev = dev->pdev;
709 dev->name = dev_name(&pdev->dev);
711 dev->clk = devm_clk_get(&pdev->dev, NULL);
713 dev->device_wakeup = devm_gpiod_get_optional(&pdev->dev,
716 if (IS_ERR(dev->device_wakeup))
717 return PTR_ERR(dev->device_wakeup);
719 dev->shutdown = devm_gpiod_get_optional(&pdev->dev, "shutdown",
721 if (IS_ERR(dev->shutdown))
722 return PTR_ERR(dev->shutdown);
724 /* IRQ can be declared in ACPI table as Interrupt or GpioInt */
725 dev->irq = platform_get_irq(pdev, 0);
727 struct gpio_desc *gpio;
729 gpio = devm_gpiod_get_optional(&pdev->dev, "host-wakeup",
732 return PTR_ERR(gpio);
734 dev->irq = gpiod_to_irq(gpio);
737 dev_info(&pdev->dev, "BCM irq: %d\n", dev->irq);
739 /* Make sure at-least one of the GPIO is defined and that
740 * a name is specified for this instance
742 if ((!dev->device_wakeup && !dev->shutdown) || !dev->name) {
743 dev_err(&pdev->dev, "invalid platform data\n");
751 static int bcm_acpi_probe(struct bcm_device *dev)
753 struct platform_device *pdev = dev->pdev;
754 LIST_HEAD(resources);
755 const struct dmi_system_id *dmi_id;
756 const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios;
757 const struct acpi_device_id *id;
760 /* Retrieve GPIO data */
761 id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
763 gpio_mapping = (const struct acpi_gpio_mapping *) id->driver_data;
765 ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
770 ret = bcm_platform_probe(dev);
774 /* Retrieve UART ACPI info */
775 ret = acpi_dev_get_resources(ACPI_COMPANION(&dev->pdev->dev),
776 &resources, bcm_resource, dev);
779 acpi_dev_free_resource_list(&resources);
781 dmi_id = dmi_first_match(bcm_wrong_irq_dmi_table);
783 bt_dev_warn(dev, "%s: Overwriting IRQ polarity to active low",
785 dev->irq_polarity = *(u8 *)dmi_id->driver_data;
791 static int bcm_acpi_probe(struct bcm_device *dev)
795 #endif /* CONFIG_ACPI */
797 static int bcm_probe(struct platform_device *pdev)
799 struct bcm_device *dev;
802 dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
808 if (has_acpi_companion(&pdev->dev))
809 ret = bcm_acpi_probe(dev);
811 ret = bcm_platform_probe(dev);
815 platform_set_drvdata(pdev, dev);
817 dev_info(&pdev->dev, "%s device registered.\n", dev->name);
819 /* Place this instance on the device list */
820 mutex_lock(&bcm_device_lock);
821 list_add_tail(&dev->list, &bcm_device_list);
822 mutex_unlock(&bcm_device_lock);
824 bcm_gpio_set_power(dev, false);
829 static int bcm_remove(struct platform_device *pdev)
831 struct bcm_device *dev = platform_get_drvdata(pdev);
833 mutex_lock(&bcm_device_lock);
834 list_del(&dev->list);
835 mutex_unlock(&bcm_device_lock);
837 acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
839 dev_info(&pdev->dev, "%s device unregistered.\n", dev->name);
844 static const struct hci_uart_proto bcm_proto = {
848 .init_speed = 115200,
849 .oper_speed = 4000000,
854 .set_baudrate = bcm_set_baudrate,
856 .enqueue = bcm_enqueue,
857 .dequeue = bcm_dequeue,
861 static const struct acpi_device_id bcm_acpi_match[] = {
862 { "BCM2E1A", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
863 { "BCM2E39", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
864 { "BCM2E3A", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
865 { "BCM2E3D", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
866 { "BCM2E3F", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
867 { "BCM2E40", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
868 { "BCM2E54", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
869 { "BCM2E55", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
870 { "BCM2E64", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
871 { "BCM2E65", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
872 { "BCM2E67", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
873 { "BCM2E71", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
874 { "BCM2E7B", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
875 { "BCM2E7C", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
876 { "BCM2E95", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
877 { "BCM2E96", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
880 MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
883 /* Platform suspend and resume callbacks */
884 static const struct dev_pm_ops bcm_pm_ops = {
885 SET_SYSTEM_SLEEP_PM_OPS(bcm_suspend, bcm_resume)
886 SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL)
889 static struct platform_driver bcm_driver = {
891 .remove = bcm_remove,
894 .acpi_match_table = ACPI_PTR(bcm_acpi_match),
899 int __init bcm_init(void)
901 platform_driver_register(&bcm_driver);
903 return hci_uart_register_proto(&bcm_proto);
906 int __exit bcm_deinit(void)
908 platform_driver_unregister(&bcm_driver);
910 return hci_uart_unregister_proto(&bcm_proto);