3 * Bluetooth HCI UART driver
5 * Copyright (C) 2000-2001 Qualcomm Incorporated
6 * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
7 * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26 #include <linux/module.h>
28 #include <linux/kernel.h>
29 #include <linux/init.h>
30 #include <linux/types.h>
31 #include <linux/fcntl.h>
32 #include <linux/interrupt.h>
33 #include <linux/ptrace.h>
34 #include <linux/poll.h>
36 #include <linux/slab.h>
37 #include <linux/tty.h>
38 #include <linux/errno.h>
39 #include <linux/string.h>
40 #include <linux/signal.h>
41 #include <linux/ioctl.h>
42 #include <linux/skbuff.h>
43 #include <linux/firmware.h>
45 #include <net/bluetooth/bluetooth.h>
46 #include <net/bluetooth/hci_core.h>
54 static const struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
56 int hci_uart_register_proto(const struct hci_uart_proto *p)
58 if (p->id >= HCI_UART_MAX_PROTO)
66 BT_INFO("HCI UART protocol %s registered", p->name);
71 int hci_uart_unregister_proto(const struct hci_uart_proto *p)
73 if (p->id >= HCI_UART_MAX_PROTO)
84 static const struct hci_uart_proto *hci_uart_get_proto(unsigned int id)
86 if (id >= HCI_UART_MAX_PROTO)
92 static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
94 struct hci_dev *hdev = hu->hdev;
96 /* Update HCI stat counters */
102 case HCI_ACLDATA_PKT:
106 case HCI_SCODATA_PKT:
112 static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
114 struct sk_buff *skb = hu->tx_skb;
117 skb = hu->proto->dequeue(hu);
124 int hci_uart_tx_wakeup(struct hci_uart *hu)
126 if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
127 set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
133 schedule_work(&hu->write_work);
138 static void hci_uart_write_work(struct work_struct *work)
140 struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
141 struct tty_struct *tty = hu->tty;
142 struct hci_dev *hdev = hu->hdev;
145 /* REVISIT: should we cope with bad skbs or ->write() returning
150 clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
152 while ((skb = hci_uart_dequeue(hu))) {
155 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
156 len = tty->ops->write(tty, skb->data, skb->len);
157 hdev->stat.byte_tx += len;
165 hci_uart_tx_complete(hu, bt_cb(skb)->pkt_type);
169 if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state))
172 clear_bit(HCI_UART_SENDING, &hu->tx_state);
175 static void hci_uart_init_work(struct work_struct *work)
177 struct hci_uart *hu = container_of(work, struct hci_uart, init_ready);
180 if (!test_and_clear_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
183 err = hci_register_dev(hu->hdev);
185 BT_ERR("Can't register HCI device");
186 hci_free_dev(hu->hdev);
188 hu->proto->close(hu);
191 set_bit(HCI_UART_REGISTERED, &hu->flags);
194 int hci_uart_init_ready(struct hci_uart *hu)
196 if (!test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
199 schedule_work(&hu->init_ready);
204 /* ------- Interface to HCI layer ------ */
205 /* Initialize device */
206 static int hci_uart_open(struct hci_dev *hdev)
208 BT_DBG("%s %p", hdev->name, hdev);
210 /* Nothing to do for UART driver */
215 static int hci_uart_flush(struct hci_dev *hdev)
217 struct hci_uart *hu = hci_get_drvdata(hdev);
218 struct tty_struct *tty = hu->tty;
220 BT_DBG("hdev %p tty %p", hdev, tty);
223 kfree_skb(hu->tx_skb); hu->tx_skb = NULL;
226 /* Flush any pending characters in the driver and discipline. */
227 tty_ldisc_flush(tty);
228 tty_driver_flush_buffer(tty);
230 if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
231 hu->proto->flush(hu);
237 static int hci_uart_close(struct hci_dev *hdev)
239 BT_DBG("hdev %p", hdev);
241 hci_uart_flush(hdev);
246 /* Send frames from HCI layer */
247 static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
249 struct hci_uart *hu = hci_get_drvdata(hdev);
251 BT_DBG("%s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type, skb->len);
253 hu->proto->enqueue(hu, skb);
255 hci_uart_tx_wakeup(hu);
260 /* Flow control or un-flow control the device */
261 void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
263 struct tty_struct *tty = hu->tty;
264 struct ktermios ktermios;
266 unsigned int set = 0;
267 unsigned int clear = 0;
270 /* Disable hardware flow control */
271 ktermios = tty->termios;
272 ktermios.c_cflag &= ~CRTSCTS;
273 status = tty_set_termios(tty, &ktermios);
274 BT_DBG("Disabling hardware flow control: %s",
275 status ? "failed" : "success");
277 /* Clear RTS to prevent the device from sending */
278 /* Most UARTs need OUT2 to enable interrupts */
279 status = tty->driver->ops->tiocmget(tty);
280 BT_DBG("Current tiocm 0x%x", status);
282 set &= ~(TIOCM_OUT2 | TIOCM_RTS);
284 set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
285 TIOCM_OUT2 | TIOCM_LOOP;
286 clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
287 TIOCM_OUT2 | TIOCM_LOOP;
288 status = tty->driver->ops->tiocmset(tty, set, clear);
289 BT_DBG("Clearing RTS: %s", status ? "failed" : "success");
291 /* Set RTS to allow the device to send again */
292 status = tty->driver->ops->tiocmget(tty);
293 BT_DBG("Current tiocm 0x%x", status);
295 set |= (TIOCM_OUT2 | TIOCM_RTS);
297 set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
298 TIOCM_OUT2 | TIOCM_LOOP;
299 clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
300 TIOCM_OUT2 | TIOCM_LOOP;
301 status = tty->driver->ops->tiocmset(tty, set, clear);
302 BT_DBG("Setting RTS: %s", status ? "failed" : "success");
304 /* Re-enable hardware flow control */
305 ktermios = tty->termios;
306 ktermios.c_cflag |= CRTSCTS;
307 status = tty_set_termios(tty, &ktermios);
308 BT_DBG("Enabling hardware flow control: %s",
309 status ? "failed" : "success");
313 void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
314 unsigned int oper_speed)
316 hu->init_speed = init_speed;
317 hu->oper_speed = oper_speed;
320 void hci_uart_init_tty(struct hci_uart *hu)
322 struct tty_struct *tty = hu->tty;
323 struct ktermios ktermios;
325 /* Bring the UART into a known 8 bits no parity hw fc state */
326 ktermios = tty->termios;
327 ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP |
328 INLCR | IGNCR | ICRNL | IXON);
329 ktermios.c_oflag &= ~OPOST;
330 ktermios.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
331 ktermios.c_cflag &= ~(CSIZE | PARENB);
332 ktermios.c_cflag |= CS8;
333 ktermios.c_cflag |= CRTSCTS;
335 /* tty_set_termios() return not checked as it is always 0 */
336 tty_set_termios(tty, &ktermios);
339 void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
341 struct tty_struct *tty = hu->tty;
342 struct ktermios ktermios;
344 ktermios = tty->termios;
345 ktermios.c_cflag &= ~CBAUD;
346 tty_termios_encode_baud_rate(&ktermios, speed, speed);
348 /* tty_set_termios() return not checked as it is always 0 */
349 tty_set_termios(tty, &ktermios);
351 BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name,
352 tty->termios.c_ispeed, tty->termios.c_ospeed);
355 static int hci_uart_setup(struct hci_dev *hdev)
357 struct hci_uart *hu = hci_get_drvdata(hdev);
358 struct hci_rp_read_local_version *ver;
363 /* Init speed if any */
365 speed = hu->init_speed;
366 else if (hu->proto->init_speed)
367 speed = hu->proto->init_speed;
372 hci_uart_set_baudrate(hu, speed);
374 /* Operational speed if any */
376 speed = hu->oper_speed;
377 else if (hu->proto->oper_speed)
378 speed = hu->proto->oper_speed;
382 if (hu->proto->set_baudrate && speed) {
383 err = hu->proto->set_baudrate(hu, speed);
385 hci_uart_set_baudrate(hu, speed);
388 if (hu->proto->setup)
389 return hu->proto->setup(hu);
391 if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags))
394 skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
397 BT_ERR("%s: Reading local version information failed (%ld)",
398 hdev->name, PTR_ERR(skb));
402 if (skb->len != sizeof(*ver)) {
403 BT_ERR("%s: Event length mismatch for version information",
408 ver = (struct hci_rp_read_local_version *)skb->data;
410 switch (le16_to_cpu(ver->manufacturer)) {
411 #ifdef CONFIG_BT_HCIUART_INTEL
413 hdev->set_bdaddr = btintel_set_bdaddr;
414 btintel_check_bdaddr(hdev);
417 #ifdef CONFIG_BT_HCIUART_BCM
419 hdev->set_bdaddr = btbcm_set_bdaddr;
420 btbcm_check_bdaddr(hdev);
430 /* ------ LDISC part ------ */
433 * Called when line discipline changed to HCI_UART.
436 * tty pointer to tty info structure
438 * 0 if success, otherwise error code
440 static int hci_uart_tty_open(struct tty_struct *tty)
444 BT_DBG("tty %p", tty);
446 /* Error if the tty has no write op instead of leaving an exploitable
448 if (tty->ops->write == NULL)
451 hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL);
453 BT_ERR("Can't allocate control structure");
459 tty->receive_room = 65536;
461 INIT_WORK(&hu->init_ready, hci_uart_init_work);
462 INIT_WORK(&hu->write_work, hci_uart_write_work);
464 /* Flush any pending characters in the driver and line discipline. */
466 /* FIXME: why is this needed. Note don't use ldisc_ref here as the
467 open path is before the ldisc is referencable */
469 if (tty->ldisc->ops->flush_buffer)
470 tty->ldisc->ops->flush_buffer(tty);
471 tty_driver_flush_buffer(tty);
476 /* hci_uart_tty_close()
478 * Called when the line discipline is changed to something
479 * else, the tty is closed, or the tty detects a hangup.
481 static void hci_uart_tty_close(struct tty_struct *tty)
483 struct hci_uart *hu = tty->disc_data;
484 struct hci_dev *hdev;
486 BT_DBG("tty %p", tty);
488 /* Detach from the tty */
489 tty->disc_data = NULL;
496 hci_uart_close(hdev);
498 cancel_work_sync(&hu->write_work);
500 if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
502 if (test_bit(HCI_UART_REGISTERED, &hu->flags))
503 hci_unregister_dev(hdev);
506 hu->proto->close(hu);
512 /* hci_uart_tty_wakeup()
514 * Callback for transmit wakeup. Called when low level
515 * device driver can accept more send data.
517 * Arguments: tty pointer to associated tty instance data
520 static void hci_uart_tty_wakeup(struct tty_struct *tty)
522 struct hci_uart *hu = tty->disc_data;
529 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
534 if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
535 hci_uart_tx_wakeup(hu);
538 /* hci_uart_tty_receive()
540 * Called by tty low level driver when receive data is
543 * Arguments: tty pointer to tty isntance data
544 * data pointer to received data
545 * flags pointer to flags for data
546 * count count of received data in bytes
550 static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
551 char *flags, int count)
553 struct hci_uart *hu = tty->disc_data;
555 if (!hu || tty != hu->tty)
558 if (!test_bit(HCI_UART_PROTO_SET, &hu->flags))
561 /* It does not need a lock here as it is already protected by a mutex in
564 hu->proto->recv(hu, data, count);
567 hu->hdev->stat.byte_rx += count;
572 static int hci_uart_register_dev(struct hci_uart *hu)
574 struct hci_dev *hdev;
578 /* Initialize and register HCI device */
579 hdev = hci_alloc_dev();
581 BT_ERR("Can't allocate HCI device");
587 hdev->bus = HCI_UART;
588 hci_set_drvdata(hdev, hu);
590 /* Only when vendor specific setup callback is provided, consider
591 * the manufacturer information valid. This avoids filling in the
592 * value for Ericsson when nothing is specified.
594 if (hu->proto->setup)
595 hdev->manufacturer = hu->proto->manufacturer;
597 hdev->open = hci_uart_open;
598 hdev->close = hci_uart_close;
599 hdev->flush = hci_uart_flush;
600 hdev->send = hci_uart_send_frame;
601 hdev->setup = hci_uart_setup;
602 SET_HCIDEV_DEV(hdev, hu->tty->dev);
604 if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
605 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
607 if (test_bit(HCI_UART_EXT_CONFIG, &hu->hdev_flags))
608 set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks);
610 if (!test_bit(HCI_UART_RESET_ON_INIT, &hu->hdev_flags))
611 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
613 if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags))
614 hdev->dev_type = HCI_AMP;
616 hdev->dev_type = HCI_BREDR;
618 if (test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
621 if (hci_register_dev(hdev) < 0) {
622 BT_ERR("Can't register HCI device");
627 set_bit(HCI_UART_REGISTERED, &hu->flags);
632 static int hci_uart_set_proto(struct hci_uart *hu, int id)
634 const struct hci_uart_proto *p;
637 p = hci_uart_get_proto(id);
639 return -EPROTONOSUPPORT;
647 err = hci_uart_register_dev(hu);
656 static int hci_uart_set_flags(struct hci_uart *hu, unsigned long flags)
658 unsigned long valid_flags = BIT(HCI_UART_RAW_DEVICE) |
659 BIT(HCI_UART_RESET_ON_INIT) |
660 BIT(HCI_UART_CREATE_AMP) |
661 BIT(HCI_UART_INIT_PENDING) |
662 BIT(HCI_UART_EXT_CONFIG) |
663 BIT(HCI_UART_VND_DETECT);
665 if (flags & ~valid_flags)
668 hu->hdev_flags = flags;
673 /* hci_uart_tty_ioctl()
675 * Process IOCTL system call for the tty device.
679 * tty pointer to tty instance data
680 * file pointer to open file object for device
681 * cmd IOCTL command code
682 * arg argument for IOCTL call (cmd dependent)
684 * Return Value: Command dependent
686 static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
687 unsigned int cmd, unsigned long arg)
689 struct hci_uart *hu = tty->disc_data;
694 /* Verify the status of the device */
699 case HCIUARTSETPROTO:
700 if (!test_and_set_bit(HCI_UART_PROTO_SET, &hu->flags)) {
701 err = hci_uart_set_proto(hu, arg);
703 clear_bit(HCI_UART_PROTO_SET, &hu->flags);
710 case HCIUARTGETPROTO:
711 if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
712 return hu->proto->id;
715 case HCIUARTGETDEVICE:
716 if (test_bit(HCI_UART_REGISTERED, &hu->flags))
720 case HCIUARTSETFLAGS:
721 if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
723 err = hci_uart_set_flags(hu, arg);
728 case HCIUARTGETFLAGS:
729 return hu->hdev_flags;
732 err = n_tty_ioctl_helper(tty, file, cmd, arg);
740 * We don't provide read/write/poll interface for user space.
742 static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
743 unsigned char __user *buf, size_t nr)
748 static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file,
749 const unsigned char *data, size_t count)
754 static unsigned int hci_uart_tty_poll(struct tty_struct *tty,
755 struct file *filp, poll_table *wait)
760 static int __init hci_uart_init(void)
762 static struct tty_ldisc_ops hci_uart_ldisc;
765 BT_INFO("HCI UART driver ver %s", VERSION);
767 /* Register the tty discipline */
769 memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc));
770 hci_uart_ldisc.magic = TTY_LDISC_MAGIC;
771 hci_uart_ldisc.name = "n_hci";
772 hci_uart_ldisc.open = hci_uart_tty_open;
773 hci_uart_ldisc.close = hci_uart_tty_close;
774 hci_uart_ldisc.read = hci_uart_tty_read;
775 hci_uart_ldisc.write = hci_uart_tty_write;
776 hci_uart_ldisc.ioctl = hci_uart_tty_ioctl;
777 hci_uart_ldisc.poll = hci_uart_tty_poll;
778 hci_uart_ldisc.receive_buf = hci_uart_tty_receive;
779 hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup;
780 hci_uart_ldisc.owner = THIS_MODULE;
782 err = tty_register_ldisc(N_HCI, &hci_uart_ldisc);
784 BT_ERR("HCI line discipline registration failed. (%d)", err);
788 #ifdef CONFIG_BT_HCIUART_H4
791 #ifdef CONFIG_BT_HCIUART_BCSP
794 #ifdef CONFIG_BT_HCIUART_LL
797 #ifdef CONFIG_BT_HCIUART_ATH3K
800 #ifdef CONFIG_BT_HCIUART_3WIRE
803 #ifdef CONFIG_BT_HCIUART_INTEL
806 #ifdef CONFIG_BT_HCIUART_BCM
809 #ifdef CONFIG_BT_HCIUART_QCA
816 static void __exit hci_uart_exit(void)
820 #ifdef CONFIG_BT_HCIUART_H4
823 #ifdef CONFIG_BT_HCIUART_BCSP
826 #ifdef CONFIG_BT_HCIUART_LL
829 #ifdef CONFIG_BT_HCIUART_ATH3K
832 #ifdef CONFIG_BT_HCIUART_3WIRE
835 #ifdef CONFIG_BT_HCIUART_INTEL
838 #ifdef CONFIG_BT_HCIUART_BCM
841 #ifdef CONFIG_BT_HCIUART_QCA
845 /* Release tty registration of line discipline */
846 err = tty_unregister_ldisc(N_HCI);
848 BT_ERR("Can't unregister HCI line discipline (%d)", err);
851 module_init(hci_uart_init);
852 module_exit(hci_uart_exit);
854 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
855 MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION);
856 MODULE_VERSION(VERSION);
857 MODULE_LICENSE("GPL");
858 MODULE_ALIAS_LDISC(N_HCI);