2 * bios-less APM driver for ARM Linux
3 * Jamey Hicks <jamey@crl.dec.com>
4 * adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com)
7 * Intel Corporation, Microsoft Corporation. Advanced Power Management
8 * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
10 * This document is available from Microsoft at:
11 * http://www.microsoft.com/whdc/archive/amp_12.mspx
13 #include <linux/module.h>
14 #include <linux/poll.h>
15 #include <linux/slab.h>
16 #include <linux/mutex.h>
17 #include <linux/proc_fs.h>
18 #include <linux/seq_file.h>
19 #include <linux/miscdevice.h>
20 #include <linux/apm_bios.h>
21 #include <linux/capability.h>
22 #include <linux/sched.h>
23 #include <linux/suspend.h>
24 #include <linux/apm-emulation.h>
25 #include <linux/freezer.h>
26 #include <linux/device.h>
27 #include <linux/kernel.h>
28 #include <linux/list.h>
29 #include <linux/init.h>
30 #include <linux/completion.h>
31 #include <linux/kthread.h>
32 #include <linux/delay.h>
36 * The apm_bios device is one of the misc char devices.
37 * This is its minor number.
39 #define APM_MINOR_DEV 134
42 * One option can be changed at boot time as follows:
43 * apm=on/off enable/disable APM
47 * Maximum number of events stored
49 #define APM_MAX_EVENTS 16
52 unsigned int event_head;
53 unsigned int event_tail;
54 apm_event_t events[APM_MAX_EVENTS];
58 * thread states (for threads using a writable /dev/apm_bios fd):
60 * SUSPEND_NONE: nothing happening
61 * SUSPEND_PENDING: suspend event queued for thread and pending to be read
62 * SUSPEND_READ: suspend event read, pending acknowledgement
63 * SUSPEND_ACKED: acknowledgement received from thread (via ioctl),
65 * SUSPEND_ACKTO: acknowledgement timeout
66 * SUSPEND_DONE: thread had acked suspend and is now notified of
69 * SUSPEND_WAIT: this thread invoked suspend and is waiting for resume
71 * A thread migrates in one of three paths:
72 * NONE -1-> PENDING -2-> READ -3-> ACKED -4-> DONE -5-> NONE
73 * -6-> ACKTO -7-> NONE
74 * NONE -8-> WAIT -9-> NONE
76 * While in PENDING or READ, the thread is accounted for in the
77 * suspend_acks_pending counter.
79 * The transitions are invoked as follows:
80 * 1: suspend event is signalled from the core PM code
81 * 2: the suspend event is read from the fd by the userspace thread
82 * 3: userspace thread issues the APM_IOC_SUSPEND ioctl (as ack)
83 * 4: core PM code signals that we have resumed
84 * 5: APM_IOC_SUSPEND ioctl returns
86 * 6: the notifier invoked from the core PM code timed out waiting
87 * for all relevant threds to enter ACKED state and puts those
88 * that haven't into ACKTO
89 * 7: those threads issue APM_IOC_SUSPEND ioctl too late,
92 * 8: userspace thread issues the APM_IOC_SUSPEND ioctl (to suspend),
93 * ioctl code invokes pm_suspend()
94 * 9: pm_suspend() returns indicating resume
96 enum apm_suspend_state {
107 * The per-file APM data
110 struct list_head list;
112 unsigned int suser: 1;
113 unsigned int writer: 1;
114 unsigned int reader: 1;
117 enum apm_suspend_state suspend_state;
119 struct apm_queue queue;
125 static atomic_t suspend_acks_pending = ATOMIC_INIT(0);
126 static atomic_t userspace_notification_inhibit = ATOMIC_INIT(0);
127 static int apm_disabled;
128 static struct task_struct *kapmd_tsk;
130 static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
131 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
134 * This is a list of everyone who has opened /dev/apm_bios
136 static DECLARE_RWSEM(user_list_lock);
137 static LIST_HEAD(apm_user_list);
140 * kapmd info. kapmd provides us a process context to handle
141 * "APM" events within - specifically necessary if we're going
142 * to be suspending the system.
144 static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
145 static DEFINE_SPINLOCK(kapmd_queue_lock);
146 static struct apm_queue kapmd_queue;
148 static DEFINE_MUTEX(state_lock);
150 static const char driver_version[] = "1.13"; /* no spaces */
155 * Compatibility cruft until the IPAQ people move over to the new
158 static void __apm_get_power_status(struct apm_power_info *info)
163 * This allows machines to provide their own "apm get power status" function.
165 void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status;
166 EXPORT_SYMBOL(apm_get_power_status);
170 * APM event queue management.
172 static inline int queue_empty(struct apm_queue *q)
174 return q->event_head == q->event_tail;
177 static inline apm_event_t queue_get_event(struct apm_queue *q)
179 q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
180 return q->events[q->event_tail];
183 static void queue_add_event(struct apm_queue *q, apm_event_t event)
185 q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;
186 if (q->event_head == q->event_tail) {
190 printk(KERN_ERR "apm: an event queue overflowed\n");
191 q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
193 q->events[q->event_head] = event;
196 static void queue_event(apm_event_t event)
200 down_read(&user_list_lock);
201 list_for_each_entry(as, &apm_user_list, list) {
203 queue_add_event(&as->queue, event);
205 up_read(&user_list_lock);
206 wake_up_interruptible(&apm_waitqueue);
209 static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
211 struct apm_user *as = fp->private_data;
213 int i = count, ret = 0;
215 if (count < sizeof(apm_event_t))
218 if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)
221 wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));
223 while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {
224 event = queue_get_event(&as->queue);
227 if (copy_to_user(buf, &event, sizeof(event)))
230 mutex_lock(&state_lock);
231 if (as->suspend_state == SUSPEND_PENDING &&
232 (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND))
233 as->suspend_state = SUSPEND_READ;
234 mutex_unlock(&state_lock);
236 buf += sizeof(event);
246 static unsigned int apm_poll(struct file *fp, poll_table * wait)
248 struct apm_user *as = fp->private_data;
250 poll_wait(fp, &apm_waitqueue, wait);
251 return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;
255 * apm_ioctl - handle APM ioctl
258 * This IOCTL is overloaded, and performs two functions. It is used to:
259 * - initiate a suspend
260 * - acknowledge a suspend read from /dev/apm_bios.
261 * Only when everyone who has opened /dev/apm_bios with write permission
262 * has acknowledge does the actual suspend happen.
265 apm_ioctl(struct file *filp, u_int cmd, u_long arg)
267 struct apm_user *as = filp->private_data;
270 if (!as->suser || !as->writer)
274 case APM_IOC_SUSPEND:
275 mutex_lock(&state_lock);
277 as->suspend_result = -EINTR;
279 switch (as->suspend_state) {
282 * If we read a suspend command from /dev/apm_bios,
283 * then the corresponding APM_IOC_SUSPEND ioctl is
284 * interpreted as an acknowledge.
286 as->suspend_state = SUSPEND_ACKED;
287 atomic_dec(&suspend_acks_pending);
288 mutex_unlock(&state_lock);
291 * suspend_acks_pending changed, the notifier needs to
292 * be woken up for this
294 wake_up(&apm_suspend_waitqueue);
297 * Wait for the suspend/resume to complete. If there
298 * are pending acknowledges, we wait here for them.
299 * wait_event_freezable() is interruptible and pending
300 * signal can cause busy looping. We aren't doing
301 * anything critical, chill a bit on each iteration.
303 while (wait_event_freezable(apm_suspend_waitqueue,
304 as->suspend_state != SUSPEND_ACKED))
308 as->suspend_result = -ETIMEDOUT;
309 mutex_unlock(&state_lock);
312 as->suspend_state = SUSPEND_WAIT;
313 mutex_unlock(&state_lock);
316 * Otherwise it is a request to suspend the system.
317 * Just invoke pm_suspend(), we'll handle it from
318 * there via the notifier.
320 as->suspend_result = pm_suspend(PM_SUSPEND_MEM);
323 mutex_lock(&state_lock);
324 err = as->suspend_result;
325 as->suspend_state = SUSPEND_NONE;
326 mutex_unlock(&state_lock);
333 static int apm_release(struct inode * inode, struct file * filp)
335 struct apm_user *as = filp->private_data;
337 filp->private_data = NULL;
339 down_write(&user_list_lock);
341 up_write(&user_list_lock);
344 * We are now unhooked from the chain. As far as new
345 * events are concerned, we no longer exist.
347 mutex_lock(&state_lock);
348 if (as->suspend_state == SUSPEND_PENDING ||
349 as->suspend_state == SUSPEND_READ)
350 atomic_dec(&suspend_acks_pending);
351 mutex_unlock(&state_lock);
353 wake_up(&apm_suspend_waitqueue);
359 static int apm_open(struct inode * inode, struct file * filp)
363 as = kzalloc(sizeof(*as), GFP_KERNEL);
366 * XXX - this is a tiny bit broken, when we consider BSD
367 * process accounting. If the device is opened by root, we
368 * instantly flag that we used superuser privs. Who knows,
369 * we might close the device immediately without doing a
370 * privileged operation -- cevans
372 as->suser = capable(CAP_SYS_ADMIN);
373 as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
374 as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
376 down_write(&user_list_lock);
377 list_add(&as->list, &apm_user_list);
378 up_write(&user_list_lock);
380 filp->private_data = as;
383 return as ? 0 : -ENOMEM;
386 static const struct file_operations apm_bios_fops = {
387 .owner = THIS_MODULE,
390 .unlocked_ioctl = apm_ioctl,
392 .release = apm_release,
393 .llseek = noop_llseek,
396 static struct miscdevice apm_device = {
397 .minor = APM_MINOR_DEV,
399 .fops = &apm_bios_fops
403 #ifdef CONFIG_PROC_FS
405 * Arguments, with symbols from linux/apm_bios.h.
407 * 0) Linux driver version (this will change if format changes)
408 * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2.
409 * 2) APM flags from APM Installation Check (0x00):
410 * bit 0: APM_16_BIT_SUPPORT
411 * bit 1: APM_32_BIT_SUPPORT
412 * bit 2: APM_IDLE_SLOWS_CLOCK
413 * bit 3: APM_BIOS_DISABLED
414 * bit 4: APM_BIOS_DISENGAGED
418 * 0x02: On backup power (BIOS >= 1.1 only)
425 * 0x04: Selected battery not present (BIOS >= 1.2 only)
432 * bit 7: No system battery
434 * 6) Remaining battery life (percentage of charge):
437 * 7) Remaining battery life (time units):
438 * Number of remaining minutes or seconds
440 * 8) min = minutes; sec = seconds
442 static int proc_apm_show(struct seq_file *m, void *v)
444 struct apm_power_info info;
447 info.ac_line_status = 0xff;
448 info.battery_status = 0xff;
449 info.battery_flag = 0xff;
450 info.battery_life = -1;
454 if (apm_get_power_status)
455 apm_get_power_status(&info);
457 switch (info.units) {
458 default: units = "?"; break;
459 case 0: units = "min"; break;
460 case 1: units = "sec"; break;
463 seq_printf(m, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
464 driver_version, APM_32_BIT_SUPPORT,
465 info.ac_line_status, info.battery_status,
466 info.battery_flag, info.battery_life,
472 static int proc_apm_open(struct inode *inode, struct file *file)
474 return single_open(file, proc_apm_show, NULL);
477 static const struct file_operations apm_proc_fops = {
478 .owner = THIS_MODULE,
479 .open = proc_apm_open,
482 .release = single_release,
486 static int kapmd(void *arg)
491 wait_event_interruptible(kapmd_wait,
492 !queue_empty(&kapmd_queue) || kthread_should_stop());
494 if (kthread_should_stop())
497 spin_lock_irq(&kapmd_queue_lock);
499 if (!queue_empty(&kapmd_queue))
500 event = queue_get_event(&kapmd_queue);
501 spin_unlock_irq(&kapmd_queue_lock);
507 case APM_LOW_BATTERY:
508 case APM_POWER_STATUS_CHANGE:
512 case APM_USER_SUSPEND:
513 case APM_SYS_SUSPEND:
514 pm_suspend(PM_SUSPEND_MEM);
517 case APM_CRITICAL_SUSPEND:
518 atomic_inc(&userspace_notification_inhibit);
519 pm_suspend(PM_SUSPEND_MEM);
520 atomic_dec(&userspace_notification_inhibit);
528 static int apm_suspend_notifier(struct notifier_block *nb,
534 unsigned long apm_event;
536 /* short-cut emergency suspends */
537 if (atomic_read(&userspace_notification_inhibit))
541 case PM_SUSPEND_PREPARE:
542 case PM_HIBERNATION_PREPARE:
543 apm_event = (event == PM_SUSPEND_PREPARE) ?
544 APM_USER_SUSPEND : APM_USER_HIBERNATION;
546 * Queue an event to all "writer" users that we want
547 * to suspend and need their ack.
549 mutex_lock(&state_lock);
550 down_read(&user_list_lock);
552 list_for_each_entry(as, &apm_user_list, list) {
553 if (as->suspend_state != SUSPEND_WAIT && as->reader &&
554 as->writer && as->suser) {
555 as->suspend_state = SUSPEND_PENDING;
556 atomic_inc(&suspend_acks_pending);
557 queue_add_event(&as->queue, apm_event);
561 up_read(&user_list_lock);
562 mutex_unlock(&state_lock);
563 wake_up_interruptible(&apm_waitqueue);
566 * Wait for the the suspend_acks_pending variable to drop to
567 * zero, meaning everybody acked the suspend event (or the
568 * process was killed.)
570 * If the app won't answer within a short while we assume it
571 * locked up and ignore it.
573 err = wait_event_interruptible_timeout(
574 apm_suspend_waitqueue,
575 atomic_read(&suspend_acks_pending) == 0,
581 * Move anybody who timed out to "ack timeout" state.
583 * We could time out and the userspace does the ACK
584 * right after we time out but before we enter the
585 * locked section here, but that's fine.
587 mutex_lock(&state_lock);
588 down_read(&user_list_lock);
589 list_for_each_entry(as, &apm_user_list, list) {
590 if (as->suspend_state == SUSPEND_PENDING ||
591 as->suspend_state == SUSPEND_READ) {
592 as->suspend_state = SUSPEND_ACKTO;
593 atomic_dec(&suspend_acks_pending);
596 up_read(&user_list_lock);
597 mutex_unlock(&state_lock);
600 /* let suspend proceed */
604 /* interrupted by signal */
605 return notifier_from_errno(err);
607 case PM_POST_SUSPEND:
608 case PM_POST_HIBERNATION:
609 apm_event = (event == PM_POST_SUSPEND) ?
610 APM_NORMAL_RESUME : APM_HIBERNATION_RESUME;
612 * Anyone on the APM queues will think we're still suspended.
613 * Send a message so everyone knows we're now awake again.
615 queue_event(apm_event);
618 * Finally, wake up anyone who is sleeping on the suspend.
620 mutex_lock(&state_lock);
621 down_read(&user_list_lock);
622 list_for_each_entry(as, &apm_user_list, list) {
623 if (as->suspend_state == SUSPEND_ACKED) {
625 * TODO: maybe grab error code, needs core
626 * changes to push the error to the notifier
627 * chain (could use the second parameter if
630 as->suspend_result = 0;
631 as->suspend_state = SUSPEND_DONE;
634 up_read(&user_list_lock);
635 mutex_unlock(&state_lock);
637 wake_up(&apm_suspend_waitqueue);
645 static struct notifier_block apm_notif_block = {
646 .notifier_call = apm_suspend_notifier,
649 static int __init apm_init(void)
654 printk(KERN_NOTICE "apm: disabled on user request.\n");
658 kapmd_tsk = kthread_create(kapmd, NULL, "kapmd");
659 if (IS_ERR(kapmd_tsk)) {
660 ret = PTR_ERR(kapmd_tsk);
664 wake_up_process(kapmd_tsk);
666 #ifdef CONFIG_PROC_FS
667 proc_create("apm", 0, NULL, &apm_proc_fops);
670 ret = misc_register(&apm_device);
674 ret = register_pm_notifier(&apm_notif_block);
681 misc_deregister(&apm_device);
683 remove_proc_entry("apm", NULL);
684 kthread_stop(kapmd_tsk);
689 static void __exit apm_exit(void)
691 unregister_pm_notifier(&apm_notif_block);
692 misc_deregister(&apm_device);
693 remove_proc_entry("apm", NULL);
695 kthread_stop(kapmd_tsk);
698 module_init(apm_init);
699 module_exit(apm_exit);
701 MODULE_AUTHOR("Stephen Rothwell");
702 MODULE_DESCRIPTION("Advanced Power Management");
703 MODULE_LICENSE("GPL");
706 static int __init apm_setup(char *str)
708 while ((str != NULL) && (*str != '\0')) {
709 if (strncmp(str, "off", 3) == 0)
711 if (strncmp(str, "on", 2) == 0)
713 str = strchr(str, ',');
715 str += strspn(str, ", \t");
720 __setup("apm=", apm_setup);
724 * apm_queue_event - queue an APM event for kapmd
727 * Queue an APM event for kapmd to process and ultimately take the
728 * appropriate action. Only a subset of events are handled:
730 * %APM_POWER_STATUS_CHANGE
733 * %APM_CRITICAL_SUSPEND
735 void apm_queue_event(apm_event_t event)
739 spin_lock_irqsave(&kapmd_queue_lock, flags);
740 queue_add_event(&kapmd_queue, event);
741 spin_unlock_irqrestore(&kapmd_queue_lock, flags);
743 wake_up_interruptible(&kapmd_wait);
745 EXPORT_SYMBOL(apm_queue_event);