]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/dma/qcom/hidma_ll.c
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
[karo-tx-linux.git] / drivers / dma / qcom / hidma_ll.c
1 /*
2  * Qualcomm Technologies HIDMA DMA engine low level code
3  *
4  * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 and
8  * only version 2 as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  */
15
16 #include <linux/dmaengine.h>
17 #include <linux/slab.h>
18 #include <linux/interrupt.h>
19 #include <linux/mm.h>
20 #include <linux/highmem.h>
21 #include <linux/dma-mapping.h>
22 #include <linux/delay.h>
23 #include <linux/atomic.h>
24 #include <linux/iopoll.h>
25 #include <linux/kfifo.h>
26 #include <linux/bitops.h>
27
28 #include "hidma.h"
29
30 #define HIDMA_EVRE_SIZE                 16      /* each EVRE is 16 bytes */
31
32 #define HIDMA_TRCA_CTRLSTS_REG                  0x000
33 #define HIDMA_TRCA_RING_LOW_REG         0x008
34 #define HIDMA_TRCA_RING_HIGH_REG                0x00C
35 #define HIDMA_TRCA_RING_LEN_REG         0x010
36 #define HIDMA_TRCA_DOORBELL_REG         0x400
37
38 #define HIDMA_EVCA_CTRLSTS_REG                  0x000
39 #define HIDMA_EVCA_INTCTRL_REG                  0x004
40 #define HIDMA_EVCA_RING_LOW_REG         0x008
41 #define HIDMA_EVCA_RING_HIGH_REG                0x00C
42 #define HIDMA_EVCA_RING_LEN_REG         0x010
43 #define HIDMA_EVCA_WRITE_PTR_REG                0x020
44 #define HIDMA_EVCA_DOORBELL_REG         0x400
45
46 #define HIDMA_EVCA_IRQ_STAT_REG         0x100
47 #define HIDMA_EVCA_IRQ_CLR_REG                  0x108
48 #define HIDMA_EVCA_IRQ_EN_REG                   0x110
49
50 #define HIDMA_EVRE_CFG_IDX                      0
51
52 #define HIDMA_EVRE_ERRINFO_BIT_POS              24
53 #define HIDMA_EVRE_CODE_BIT_POS         28
54
55 #define HIDMA_EVRE_ERRINFO_MASK         GENMASK(3, 0)
56 #define HIDMA_EVRE_CODE_MASK                    GENMASK(3, 0)
57
58 #define HIDMA_CH_CONTROL_MASK                   GENMASK(7, 0)
59 #define HIDMA_CH_STATE_MASK                     GENMASK(7, 0)
60 #define HIDMA_CH_STATE_BIT_POS                  0x8
61
62 #define HIDMA_IRQ_EV_CH_EOB_IRQ_BIT_POS 0
63 #define HIDMA_IRQ_EV_CH_WR_RESP_BIT_POS 1
64 #define HIDMA_IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS   9
65 #define HIDMA_IRQ_TR_CH_DATA_RD_ER_BIT_POS      10
66 #define HIDMA_IRQ_TR_CH_DATA_WR_ER_BIT_POS      11
67 #define HIDMA_IRQ_TR_CH_INVALID_TRE_BIT_POS     14
68
69 #define ENABLE_IRQS (BIT(HIDMA_IRQ_EV_CH_EOB_IRQ_BIT_POS)       | \
70                      BIT(HIDMA_IRQ_EV_CH_WR_RESP_BIT_POS)       | \
71                      BIT(HIDMA_IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS) | \
72                      BIT(HIDMA_IRQ_TR_CH_DATA_RD_ER_BIT_POS)    | \
73                      BIT(HIDMA_IRQ_TR_CH_DATA_WR_ER_BIT_POS)    | \
74                      BIT(HIDMA_IRQ_TR_CH_INVALID_TRE_BIT_POS))
75
76 #define HIDMA_INCREMENT_ITERATOR(iter, size, ring_size) \
77 do {                                                            \
78         iter += size;                                           \
79         if (iter >= ring_size)                                  \
80                 iter -= ring_size;                              \
81 } while (0)
82
83 #define HIDMA_CH_STATE(val)     \
84         ((val >> HIDMA_CH_STATE_BIT_POS) & HIDMA_CH_STATE_MASK)
85
86 #define HIDMA_ERR_INT_MASK                              \
87         (BIT(HIDMA_IRQ_TR_CH_INVALID_TRE_BIT_POS)   |   \
88          BIT(HIDMA_IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS) |   \
89          BIT(HIDMA_IRQ_EV_CH_WR_RESP_BIT_POS)       |   \
90          BIT(HIDMA_IRQ_TR_CH_DATA_RD_ER_BIT_POS)    |   \
91          BIT(HIDMA_IRQ_TR_CH_DATA_WR_ER_BIT_POS))
92
93 enum ch_command {
94         HIDMA_CH_DISABLE = 0,
95         HIDMA_CH_ENABLE = 1,
96         HIDMA_CH_SUSPEND = 2,
97         HIDMA_CH_RESET = 9,
98 };
99
100 enum ch_state {
101         HIDMA_CH_DISABLED = 0,
102         HIDMA_CH_ENABLED = 1,
103         HIDMA_CH_RUNNING = 2,
104         HIDMA_CH_SUSPENDED = 3,
105         HIDMA_CH_STOPPED = 4,
106 };
107
108 enum tre_type {
109         HIDMA_TRE_MEMCPY = 3,
110 };
111
112 enum err_code {
113         HIDMA_EVRE_STATUS_COMPLETE = 1,
114         HIDMA_EVRE_STATUS_ERROR = 4,
115 };
116
117 static int hidma_is_chan_enabled(int state)
118 {
119         switch (state) {
120         case HIDMA_CH_ENABLED:
121         case HIDMA_CH_RUNNING:
122                 return true;
123         default:
124                 return false;
125         }
126 }
127
128 void hidma_ll_free(struct hidma_lldev *lldev, u32 tre_ch)
129 {
130         struct hidma_tre *tre;
131
132         if (tre_ch >= lldev->nr_tres) {
133                 dev_err(lldev->dev, "invalid TRE number in free:%d", tre_ch);
134                 return;
135         }
136
137         tre = &lldev->trepool[tre_ch];
138         if (atomic_read(&tre->allocated) != true) {
139                 dev_err(lldev->dev, "trying to free an unused TRE:%d", tre_ch);
140                 return;
141         }
142
143         atomic_set(&tre->allocated, 0);
144 }
145
146 int hidma_ll_request(struct hidma_lldev *lldev, u32 sig, const char *dev_name,
147                      void (*callback)(void *data), void *data, u32 *tre_ch)
148 {
149         unsigned int i;
150         struct hidma_tre *tre;
151         u32 *tre_local;
152
153         if (!tre_ch || !lldev)
154                 return -EINVAL;
155
156         /* need to have at least one empty spot in the queue */
157         for (i = 0; i < lldev->nr_tres - 1; i++) {
158                 if (atomic_add_unless(&lldev->trepool[i].allocated, 1, 1))
159                         break;
160         }
161
162         if (i == (lldev->nr_tres - 1))
163                 return -ENOMEM;
164
165         tre = &lldev->trepool[i];
166         tre->dma_sig = sig;
167         tre->dev_name = dev_name;
168         tre->callback = callback;
169         tre->data = data;
170         tre->idx = i;
171         tre->status = 0;
172         tre->queued = 0;
173         tre->err_code = 0;
174         tre->err_info = 0;
175         tre->lldev = lldev;
176         tre_local = &tre->tre_local[0];
177         tre_local[HIDMA_TRE_CFG_IDX] = HIDMA_TRE_MEMCPY;
178         tre_local[HIDMA_TRE_CFG_IDX] |= (lldev->chidx & 0xFF) << 8;
179         tre_local[HIDMA_TRE_CFG_IDX] |= BIT(16);        /* set IEOB */
180         *tre_ch = i;
181         if (callback)
182                 callback(data);
183         return 0;
184 }
185
186 /*
187  * Multiple TREs may be queued and waiting in the pending queue.
188  */
189 static void hidma_ll_tre_complete(unsigned long arg)
190 {
191         struct hidma_lldev *lldev = (struct hidma_lldev *)arg;
192         struct hidma_tre *tre;
193
194         while (kfifo_out(&lldev->handoff_fifo, &tre, 1)) {
195                 /* call the user if it has been read by the hardware */
196                 if (tre->callback)
197                         tre->callback(tre->data);
198         }
199 }
200
201 static int hidma_post_completed(struct hidma_lldev *lldev, u8 err_info,
202                                 u8 err_code)
203 {
204         struct hidma_tre *tre;
205         unsigned long flags;
206         u32 tre_iterator;
207
208         spin_lock_irqsave(&lldev->lock, flags);
209
210         tre_iterator = lldev->tre_processed_off;
211         tre = lldev->pending_tre_list[tre_iterator / HIDMA_TRE_SIZE];
212         if (!tre) {
213                 spin_unlock_irqrestore(&lldev->lock, flags);
214                 dev_warn(lldev->dev, "tre_index [%d] and tre out of sync\n",
215                          tre_iterator / HIDMA_TRE_SIZE);
216                 return -EINVAL;
217         }
218         lldev->pending_tre_list[tre->tre_index] = NULL;
219
220         /*
221          * Keep track of pending TREs that SW is expecting to receive
222          * from HW. We got one now. Decrement our counter.
223          */
224         if (atomic_dec_return(&lldev->pending_tre_count) < 0) {
225                 dev_warn(lldev->dev, "tre count mismatch on completion");
226                 atomic_set(&lldev->pending_tre_count, 0);
227         }
228
229         HIDMA_INCREMENT_ITERATOR(tre_iterator, HIDMA_TRE_SIZE,
230                                  lldev->tre_ring_size);
231         lldev->tre_processed_off = tre_iterator;
232         spin_unlock_irqrestore(&lldev->lock, flags);
233
234         tre->err_info = err_info;
235         tre->err_code = err_code;
236         tre->queued = 0;
237
238         kfifo_put(&lldev->handoff_fifo, tre);
239         tasklet_schedule(&lldev->task);
240
241         return 0;
242 }
243
244 /*
245  * Called to handle the interrupt for the channel.
246  * Return a positive number if TRE or EVRE were consumed on this run.
247  * Return a positive number if there are pending TREs or EVREs.
248  * Return 0 if there is nothing to consume or no pending TREs/EVREs found.
249  */
250 static int hidma_handle_tre_completion(struct hidma_lldev *lldev)
251 {
252         u32 evre_ring_size = lldev->evre_ring_size;
253         u32 err_info, err_code, evre_write_off;
254         u32 evre_iterator;
255         u32 num_completed = 0;
256
257         evre_write_off = readl_relaxed(lldev->evca + HIDMA_EVCA_WRITE_PTR_REG);
258         evre_iterator = lldev->evre_processed_off;
259
260         if ((evre_write_off > evre_ring_size) ||
261             (evre_write_off % HIDMA_EVRE_SIZE)) {
262                 dev_err(lldev->dev, "HW reports invalid EVRE write offset\n");
263                 return 0;
264         }
265
266         /*
267          * By the time control reaches here the number of EVREs and TREs
268          * may not match. Only consume the ones that hardware told us.
269          */
270         while ((evre_iterator != evre_write_off)) {
271                 u32 *current_evre = lldev->evre_ring + evre_iterator;
272                 u32 cfg;
273
274                 cfg = current_evre[HIDMA_EVRE_CFG_IDX];
275                 err_info = cfg >> HIDMA_EVRE_ERRINFO_BIT_POS;
276                 err_info &= HIDMA_EVRE_ERRINFO_MASK;
277                 err_code =
278                     (cfg >> HIDMA_EVRE_CODE_BIT_POS) & HIDMA_EVRE_CODE_MASK;
279
280                 if (hidma_post_completed(lldev, err_info, err_code))
281                         break;
282
283                 HIDMA_INCREMENT_ITERATOR(evre_iterator, HIDMA_EVRE_SIZE,
284                                          evre_ring_size);
285
286                 /*
287                  * Read the new event descriptor written by the HW.
288                  * As we are processing the delivered events, other events
289                  * get queued to the SW for processing.
290                  */
291                 evre_write_off =
292                     readl_relaxed(lldev->evca + HIDMA_EVCA_WRITE_PTR_REG);
293                 num_completed++;
294
295                 /*
296                  * An error interrupt might have arrived while we are processing
297                  * the completed interrupt.
298                  */
299                 if (!hidma_ll_isenabled(lldev))
300                         break;
301         }
302
303         if (num_completed) {
304                 u32 evre_read_off = (lldev->evre_processed_off +
305                                      HIDMA_EVRE_SIZE * num_completed);
306                 evre_read_off = evre_read_off % evre_ring_size;
307                 writel(evre_read_off, lldev->evca + HIDMA_EVCA_DOORBELL_REG);
308
309                 /* record the last processed tre offset */
310                 lldev->evre_processed_off = evre_read_off;
311         }
312
313         return num_completed;
314 }
315
316 void hidma_cleanup_pending_tre(struct hidma_lldev *lldev, u8 err_info,
317                                u8 err_code)
318 {
319         while (atomic_read(&lldev->pending_tre_count)) {
320                 if (hidma_post_completed(lldev, err_info, err_code))
321                         break;
322         }
323 }
324
325 static int hidma_ll_reset(struct hidma_lldev *lldev)
326 {
327         u32 val;
328         int ret;
329
330         val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
331         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
332         val |= HIDMA_CH_RESET << 16;
333         writel(val, lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
334
335         /*
336          * Delay 10ms after reset to allow DMA logic to quiesce.
337          * Do a polled read up to 1ms and 10ms maximum.
338          */
339         ret = readl_poll_timeout(lldev->trca + HIDMA_TRCA_CTRLSTS_REG, val,
340                                  HIDMA_CH_STATE(val) == HIDMA_CH_DISABLED,
341                                  1000, 10000);
342         if (ret) {
343                 dev_err(lldev->dev, "transfer channel did not reset\n");
344                 return ret;
345         }
346
347         val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
348         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
349         val |= HIDMA_CH_RESET << 16;
350         writel(val, lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
351
352         /*
353          * Delay 10ms after reset to allow DMA logic to quiesce.
354          * Do a polled read up to 1ms and 10ms maximum.
355          */
356         ret = readl_poll_timeout(lldev->evca + HIDMA_EVCA_CTRLSTS_REG, val,
357                                  HIDMA_CH_STATE(val) == HIDMA_CH_DISABLED,
358                                  1000, 10000);
359         if (ret)
360                 return ret;
361
362         lldev->trch_state = HIDMA_CH_DISABLED;
363         lldev->evch_state = HIDMA_CH_DISABLED;
364         return 0;
365 }
366
367 /*
368  * The interrupt handler for HIDMA will try to consume as many pending
369  * EVRE from the event queue as possible. Each EVRE has an associated
370  * TRE that holds the user interface parameters. EVRE reports the
371  * result of the transaction. Hardware guarantees ordering between EVREs
372  * and TREs. We use last processed offset to figure out which TRE is
373  * associated with which EVRE. If two TREs are consumed by HW, the EVREs
374  * are in order in the event ring.
375  *
376  * This handler will do a one pass for consuming EVREs. Other EVREs may
377  * be delivered while we are working. It will try to consume incoming
378  * EVREs one more time and return.
379  *
380  * For unprocessed EVREs, hardware will trigger another interrupt until
381  * all the interrupt bits are cleared.
382  *
383  * Hardware guarantees that by the time interrupt is observed, all data
384  * transactions in flight are delivered to their respective places and
385  * are visible to the CPU.
386  *
387  * On demand paging for IOMMU is only supported for PCIe via PRI
388  * (Page Request Interface) not for HIDMA. All other hardware instances
389  * including HIDMA work on pinned DMA addresses.
390  *
391  * HIDMA is not aware of IOMMU presence since it follows the DMA API. All
392  * IOMMU latency will be built into the data movement time. By the time
393  * interrupt happens, IOMMU lookups + data movement has already taken place.
394  *
395  * While the first read in a typical PCI endpoint ISR flushes all outstanding
396  * requests traditionally to the destination, this concept does not apply
397  * here for this HW.
398  */
399 static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
400 {
401         if (cause & HIDMA_ERR_INT_MASK) {
402                 dev_err(lldev->dev, "error 0x%x, disabling...\n",
403                                 cause);
404
405                 /* Clear out pending interrupts */
406                 writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
407
408                 /* No further submissions. */
409                 hidma_ll_disable(lldev);
410
411                 /* Driver completes the txn and intimates the client.*/
412                 hidma_cleanup_pending_tre(lldev, 0xFF,
413                                           HIDMA_EVRE_STATUS_ERROR);
414
415                 return;
416         }
417
418         /*
419          * Fine tuned for this HW...
420          *
421          * This ISR has been designed for this particular hardware. Relaxed
422          * read and write accessors are used for performance reasons due to
423          * interrupt delivery guarantees. Do not copy this code blindly and
424          * expect that to work.
425          *
426          * Try to consume as many EVREs as possible.
427          */
428         hidma_handle_tre_completion(lldev);
429
430         /* We consumed TREs or there are pending TREs or EVREs. */
431         writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
432 }
433
434 irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
435 {
436         struct hidma_lldev *lldev = arg;
437         u32 status;
438         u32 enable;
439         u32 cause;
440
441         status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
442         enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
443         cause = status & enable;
444
445         while (cause) {
446                 hidma_ll_int_handler_internal(lldev, cause);
447
448                 /*
449                  * Another interrupt might have arrived while we are
450                  * processing this one. Read the new cause.
451                  */
452                 status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
453                 enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
454                 cause = status & enable;
455         }
456
457         return IRQ_HANDLED;
458 }
459
460 irqreturn_t hidma_ll_inthandler_msi(int chirq, void *arg, int cause)
461 {
462         struct hidma_lldev *lldev = arg;
463
464         hidma_ll_int_handler_internal(lldev, cause);
465         return IRQ_HANDLED;
466 }
467
468 int hidma_ll_enable(struct hidma_lldev *lldev)
469 {
470         u32 val;
471         int ret;
472
473         val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
474         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
475         val |= HIDMA_CH_ENABLE << 16;
476         writel(val, lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
477
478         ret = readl_poll_timeout(lldev->evca + HIDMA_EVCA_CTRLSTS_REG, val,
479                                  hidma_is_chan_enabled(HIDMA_CH_STATE(val)),
480                                  1000, 10000);
481         if (ret) {
482                 dev_err(lldev->dev, "event channel did not get enabled\n");
483                 return ret;
484         }
485
486         val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
487         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
488         val |= HIDMA_CH_ENABLE << 16;
489         writel(val, lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
490
491         ret = readl_poll_timeout(lldev->trca + HIDMA_TRCA_CTRLSTS_REG, val,
492                                  hidma_is_chan_enabled(HIDMA_CH_STATE(val)),
493                                  1000, 10000);
494         if (ret) {
495                 dev_err(lldev->dev, "transfer channel did not get enabled\n");
496                 return ret;
497         }
498
499         lldev->trch_state = HIDMA_CH_ENABLED;
500         lldev->evch_state = HIDMA_CH_ENABLED;
501
502         /* enable irqs */
503         writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
504
505         return 0;
506 }
507
508 void hidma_ll_start(struct hidma_lldev *lldev)
509 {
510         unsigned long irqflags;
511
512         spin_lock_irqsave(&lldev->lock, irqflags);
513         writel(lldev->tre_write_offset, lldev->trca + HIDMA_TRCA_DOORBELL_REG);
514         spin_unlock_irqrestore(&lldev->lock, irqflags);
515 }
516
517 bool hidma_ll_isenabled(struct hidma_lldev *lldev)
518 {
519         u32 val;
520
521         val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
522         lldev->trch_state = HIDMA_CH_STATE(val);
523         val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
524         lldev->evch_state = HIDMA_CH_STATE(val);
525
526         /* both channels have to be enabled before calling this function */
527         if (hidma_is_chan_enabled(lldev->trch_state) &&
528             hidma_is_chan_enabled(lldev->evch_state))
529                 return true;
530
531         return false;
532 }
533
534 void hidma_ll_queue_request(struct hidma_lldev *lldev, u32 tre_ch)
535 {
536         struct hidma_tre *tre;
537         unsigned long flags;
538
539         tre = &lldev->trepool[tre_ch];
540
541         /* copy the TRE into its location in the TRE ring */
542         spin_lock_irqsave(&lldev->lock, flags);
543         tre->tre_index = lldev->tre_write_offset / HIDMA_TRE_SIZE;
544         lldev->pending_tre_list[tre->tre_index] = tre;
545         memcpy(lldev->tre_ring + lldev->tre_write_offset,
546                         &tre->tre_local[0], HIDMA_TRE_SIZE);
547         tre->err_code = 0;
548         tre->err_info = 0;
549         tre->queued = 1;
550         atomic_inc(&lldev->pending_tre_count);
551         lldev->tre_write_offset = (lldev->tre_write_offset + HIDMA_TRE_SIZE)
552                                         % lldev->tre_ring_size;
553         spin_unlock_irqrestore(&lldev->lock, flags);
554 }
555
556 /*
557  * Note that even though we stop this channel if there is a pending transaction
558  * in flight it will complete and follow the callback. This request will
559  * prevent further requests to be made.
560  */
561 int hidma_ll_disable(struct hidma_lldev *lldev)
562 {
563         u32 val;
564         int ret;
565
566         /* The channel needs to be in working state */
567         if (!hidma_ll_isenabled(lldev))
568                 return 0;
569
570         val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
571         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
572         val |= HIDMA_CH_SUSPEND << 16;
573         writel(val, lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
574
575         /*
576          * Start the wait right after the suspend is confirmed.
577          * Do a polled read up to 1ms and 10ms maximum.
578          */
579         ret = readl_poll_timeout(lldev->trca + HIDMA_TRCA_CTRLSTS_REG, val,
580                                  HIDMA_CH_STATE(val) == HIDMA_CH_SUSPENDED,
581                                  1000, 10000);
582         if (ret)
583                 return ret;
584
585         val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
586         val &= ~(HIDMA_CH_CONTROL_MASK << 16);
587         val |= HIDMA_CH_SUSPEND << 16;
588         writel(val, lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
589
590         /*
591          * Start the wait right after the suspend is confirmed
592          * Delay up to 10ms after reset to allow DMA logic to quiesce.
593          */
594         ret = readl_poll_timeout(lldev->evca + HIDMA_EVCA_CTRLSTS_REG, val,
595                                  HIDMA_CH_STATE(val) == HIDMA_CH_SUSPENDED,
596                                  1000, 10000);
597         if (ret)
598                 return ret;
599
600         lldev->trch_state = HIDMA_CH_SUSPENDED;
601         lldev->evch_state = HIDMA_CH_SUSPENDED;
602
603         /* disable interrupts */
604         writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
605         return 0;
606 }
607
608 void hidma_ll_set_transfer_params(struct hidma_lldev *lldev, u32 tre_ch,
609                                   dma_addr_t src, dma_addr_t dest, u32 len,
610                                   u32 flags)
611 {
612         struct hidma_tre *tre;
613         u32 *tre_local;
614
615         if (tre_ch >= lldev->nr_tres) {
616                 dev_err(lldev->dev, "invalid TRE number in transfer params:%d",
617                         tre_ch);
618                 return;
619         }
620
621         tre = &lldev->trepool[tre_ch];
622         if (atomic_read(&tre->allocated) != true) {
623                 dev_err(lldev->dev, "trying to set params on an unused TRE:%d",
624                         tre_ch);
625                 return;
626         }
627
628         tre_local = &tre->tre_local[0];
629         tre_local[HIDMA_TRE_LEN_IDX] = len;
630         tre_local[HIDMA_TRE_SRC_LOW_IDX] = lower_32_bits(src);
631         tre_local[HIDMA_TRE_SRC_HI_IDX] = upper_32_bits(src);
632         tre_local[HIDMA_TRE_DEST_LOW_IDX] = lower_32_bits(dest);
633         tre_local[HIDMA_TRE_DEST_HI_IDX] = upper_32_bits(dest);
634         tre->int_flags = flags;
635 }
636
637 /*
638  * Called during initialization and after an error condition
639  * to restore hardware state.
640  */
641 int hidma_ll_setup(struct hidma_lldev *lldev)
642 {
643         int rc;
644         u64 addr;
645         u32 val;
646         u32 nr_tres = lldev->nr_tres;
647
648         atomic_set(&lldev->pending_tre_count, 0);
649         lldev->tre_processed_off = 0;
650         lldev->evre_processed_off = 0;
651         lldev->tre_write_offset = 0;
652
653         /* disable interrupts */
654         writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
655
656         /* clear all pending interrupts */
657         val = readl(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
658         writel(val, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
659
660         rc = hidma_ll_reset(lldev);
661         if (rc)
662                 return rc;
663
664         /*
665          * Clear all pending interrupts again.
666          * Otherwise, we observe reset complete interrupts.
667          */
668         val = readl(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
669         writel(val, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
670
671         /* disable interrupts again after reset */
672         writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
673
674         addr = lldev->tre_dma;
675         writel(lower_32_bits(addr), lldev->trca + HIDMA_TRCA_RING_LOW_REG);
676         writel(upper_32_bits(addr), lldev->trca + HIDMA_TRCA_RING_HIGH_REG);
677         writel(lldev->tre_ring_size, lldev->trca + HIDMA_TRCA_RING_LEN_REG);
678
679         addr = lldev->evre_dma;
680         writel(lower_32_bits(addr), lldev->evca + HIDMA_EVCA_RING_LOW_REG);
681         writel(upper_32_bits(addr), lldev->evca + HIDMA_EVCA_RING_HIGH_REG);
682         writel(HIDMA_EVRE_SIZE * nr_tres,
683                         lldev->evca + HIDMA_EVCA_RING_LEN_REG);
684
685         /* configure interrupts */
686         hidma_ll_setup_irq(lldev, lldev->msi_support);
687
688         rc = hidma_ll_enable(lldev);
689         if (rc)
690                 return rc;
691
692         return rc;
693 }
694
695 void hidma_ll_setup_irq(struct hidma_lldev *lldev, bool msi)
696 {
697         u32 val;
698
699         lldev->msi_support = msi;
700
701         /* disable interrupts again after reset */
702         writel(0, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
703         writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
704
705         /* support IRQ by default */
706         val = readl(lldev->evca + HIDMA_EVCA_INTCTRL_REG);
707         val &= ~0xF;
708         if (!lldev->msi_support)
709                 val = val | 0x1;
710         writel(val, lldev->evca + HIDMA_EVCA_INTCTRL_REG);
711
712         /* clear all pending interrupts and enable them */
713         writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
714         writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
715 }
716
717 struct hidma_lldev *hidma_ll_init(struct device *dev, u32 nr_tres,
718                                   void __iomem *trca, void __iomem *evca,
719                                   u8 chidx)
720 {
721         u32 required_bytes;
722         struct hidma_lldev *lldev;
723         int rc;
724         size_t sz;
725
726         if (!trca || !evca || !dev || !nr_tres)
727                 return NULL;
728
729         /* need at least four TREs */
730         if (nr_tres < 4)
731                 return NULL;
732
733         /* need an extra space */
734         nr_tres += 1;
735
736         lldev = devm_kzalloc(dev, sizeof(struct hidma_lldev), GFP_KERNEL);
737         if (!lldev)
738                 return NULL;
739
740         lldev->evca = evca;
741         lldev->trca = trca;
742         lldev->dev = dev;
743         sz = sizeof(struct hidma_tre);
744         lldev->trepool = devm_kcalloc(lldev->dev, nr_tres, sz, GFP_KERNEL);
745         if (!lldev->trepool)
746                 return NULL;
747
748         required_bytes = sizeof(lldev->pending_tre_list[0]);
749         lldev->pending_tre_list = devm_kcalloc(dev, nr_tres, required_bytes,
750                                                GFP_KERNEL);
751         if (!lldev->pending_tre_list)
752                 return NULL;
753
754         sz = (HIDMA_TRE_SIZE + 1) * nr_tres;
755         lldev->tre_ring = dmam_alloc_coherent(dev, sz, &lldev->tre_dma,
756                                               GFP_KERNEL);
757         if (!lldev->tre_ring)
758                 return NULL;
759
760         memset(lldev->tre_ring, 0, (HIDMA_TRE_SIZE + 1) * nr_tres);
761         lldev->tre_ring_size = HIDMA_TRE_SIZE * nr_tres;
762         lldev->nr_tres = nr_tres;
763
764         /* the TRE ring has to be TRE_SIZE aligned */
765         if (!IS_ALIGNED(lldev->tre_dma, HIDMA_TRE_SIZE)) {
766                 u8 tre_ring_shift;
767
768                 tre_ring_shift = lldev->tre_dma % HIDMA_TRE_SIZE;
769                 tre_ring_shift = HIDMA_TRE_SIZE - tre_ring_shift;
770                 lldev->tre_dma += tre_ring_shift;
771                 lldev->tre_ring += tre_ring_shift;
772         }
773
774         sz = (HIDMA_EVRE_SIZE + 1) * nr_tres;
775         lldev->evre_ring = dmam_alloc_coherent(dev, sz, &lldev->evre_dma,
776                                                GFP_KERNEL);
777         if (!lldev->evre_ring)
778                 return NULL;
779
780         memset(lldev->evre_ring, 0, (HIDMA_EVRE_SIZE + 1) * nr_tres);
781         lldev->evre_ring_size = HIDMA_EVRE_SIZE * nr_tres;
782
783         /* the EVRE ring has to be EVRE_SIZE aligned */
784         if (!IS_ALIGNED(lldev->evre_dma, HIDMA_EVRE_SIZE)) {
785                 u8 evre_ring_shift;
786
787                 evre_ring_shift = lldev->evre_dma % HIDMA_EVRE_SIZE;
788                 evre_ring_shift = HIDMA_EVRE_SIZE - evre_ring_shift;
789                 lldev->evre_dma += evre_ring_shift;
790                 lldev->evre_ring += evre_ring_shift;
791         }
792         lldev->nr_tres = nr_tres;
793         lldev->chidx = chidx;
794
795         sz = nr_tres * sizeof(struct hidma_tre *);
796         rc = kfifo_alloc(&lldev->handoff_fifo, sz, GFP_KERNEL);
797         if (rc)
798                 return NULL;
799
800         rc = hidma_ll_setup(lldev);
801         if (rc)
802                 return NULL;
803
804         spin_lock_init(&lldev->lock);
805         tasklet_init(&lldev->task, hidma_ll_tre_complete, (unsigned long)lldev);
806         lldev->initialized = 1;
807         writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
808         return lldev;
809 }
810
811 int hidma_ll_uninit(struct hidma_lldev *lldev)
812 {
813         u32 required_bytes;
814         int rc = 0;
815         u32 val;
816
817         if (!lldev)
818                 return -ENODEV;
819
820         if (!lldev->initialized)
821                 return 0;
822
823         lldev->initialized = 0;
824
825         required_bytes = sizeof(struct hidma_tre) * lldev->nr_tres;
826         tasklet_kill(&lldev->task);
827         memset(lldev->trepool, 0, required_bytes);
828         lldev->trepool = NULL;
829         atomic_set(&lldev->pending_tre_count, 0);
830         lldev->tre_write_offset = 0;
831
832         rc = hidma_ll_reset(lldev);
833
834         /*
835          * Clear all pending interrupts again.
836          * Otherwise, we observe reset complete interrupts.
837          */
838         val = readl(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
839         writel(val, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
840         writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
841         return rc;
842 }
843
844 enum dma_status hidma_ll_status(struct hidma_lldev *lldev, u32 tre_ch)
845 {
846         enum dma_status ret = DMA_ERROR;
847         struct hidma_tre *tre;
848         unsigned long flags;
849         u8 err_code;
850
851         spin_lock_irqsave(&lldev->lock, flags);
852
853         tre = &lldev->trepool[tre_ch];
854         err_code = tre->err_code;
855
856         if (err_code & HIDMA_EVRE_STATUS_COMPLETE)
857                 ret = DMA_COMPLETE;
858         else if (err_code & HIDMA_EVRE_STATUS_ERROR)
859                 ret = DMA_ERROR;
860         else
861                 ret = DMA_IN_PROGRESS;
862         spin_unlock_irqrestore(&lldev->lock, flags);
863
864         return ret;
865 }