]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/gpio/gpio-rcar.c
MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
[karo-tx-linux.git] / drivers / gpio / gpio-rcar.c
1 /*
2  * Renesas R-Car GPIO Support
3  *
4  *  Copyright (C) 2014 Renesas Electronics Corporation
5  *  Copyright (C) 2013 Magnus Damm
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  */
16
17 #include <linux/clk.h>
18 #include <linux/err.h>
19 #include <linux/gpio.h>
20 #include <linux/init.h>
21 #include <linux/interrupt.h>
22 #include <linux/io.h>
23 #include <linux/ioport.h>
24 #include <linux/irq.h>
25 #include <linux/module.h>
26 #include <linux/of.h>
27 #include <linux/pinctrl/consumer.h>
28 #include <linux/platform_device.h>
29 #include <linux/pm_runtime.h>
30 #include <linux/spinlock.h>
31 #include <linux/slab.h>
32
33 struct gpio_rcar_priv {
34         void __iomem *base;
35         spinlock_t lock;
36         struct platform_device *pdev;
37         struct gpio_chip gpio_chip;
38         struct irq_chip irq_chip;
39         struct clk *clk;
40         unsigned int irq_parent;
41         bool has_both_edge_trigger;
42         bool needs_clk;
43 };
44
45 #define IOINTSEL 0x00   /* General IO/Interrupt Switching Register */
46 #define INOUTSEL 0x04   /* General Input/Output Switching Register */
47 #define OUTDT 0x08      /* General Output Register */
48 #define INDT 0x0c       /* General Input Register */
49 #define INTDT 0x10      /* Interrupt Display Register */
50 #define INTCLR 0x14     /* Interrupt Clear Register */
51 #define INTMSK 0x18     /* Interrupt Mask Register */
52 #define MSKCLR 0x1c     /* Interrupt Mask Clear Register */
53 #define POSNEG 0x20     /* Positive/Negative Logic Select Register */
54 #define EDGLEVEL 0x24   /* Edge/level Select Register */
55 #define FILONOFF 0x28   /* Chattering Prevention On/Off Register */
56 #define BOTHEDGE 0x4c   /* One Edge/Both Edge Select Register */
57
58 #define RCAR_MAX_GPIO_PER_BANK          32
59
60 static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
61 {
62         return ioread32(p->base + offs);
63 }
64
65 static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs,
66                                    u32 value)
67 {
68         iowrite32(value, p->base + offs);
69 }
70
71 static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs,
72                                  int bit, bool value)
73 {
74         u32 tmp = gpio_rcar_read(p, offs);
75
76         if (value)
77                 tmp |= BIT(bit);
78         else
79                 tmp &= ~BIT(bit);
80
81         gpio_rcar_write(p, offs, tmp);
82 }
83
84 static void gpio_rcar_irq_disable(struct irq_data *d)
85 {
86         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
87         struct gpio_rcar_priv *p = gpiochip_get_data(gc);
88
89         gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d)));
90 }
91
92 static void gpio_rcar_irq_enable(struct irq_data *d)
93 {
94         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
95         struct gpio_rcar_priv *p = gpiochip_get_data(gc);
96
97         gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d)));
98 }
99
100 static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
101                                                   unsigned int hwirq,
102                                                   bool active_high_rising_edge,
103                                                   bool level_trigger,
104                                                   bool both)
105 {
106         unsigned long flags;
107
108         /* follow steps in the GPIO documentation for
109          * "Setting Edge-Sensitive Interrupt Input Mode" and
110          * "Setting Level-Sensitive Interrupt Input Mode"
111          */
112
113         spin_lock_irqsave(&p->lock, flags);
114
115         /* Configure postive or negative logic in POSNEG */
116         gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge);
117
118         /* Configure edge or level trigger in EDGLEVEL */
119         gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
120
121         /* Select one edge or both edges in BOTHEDGE */
122         if (p->has_both_edge_trigger)
123                 gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
124
125         /* Select "Interrupt Input Mode" in IOINTSEL */
126         gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
127
128         /* Write INTCLR in case of edge trigger */
129         if (!level_trigger)
130                 gpio_rcar_write(p, INTCLR, BIT(hwirq));
131
132         spin_unlock_irqrestore(&p->lock, flags);
133 }
134
135 static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
136 {
137         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
138         struct gpio_rcar_priv *p = gpiochip_get_data(gc);
139         unsigned int hwirq = irqd_to_hwirq(d);
140
141         dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type);
142
143         switch (type & IRQ_TYPE_SENSE_MASK) {
144         case IRQ_TYPE_LEVEL_HIGH:
145                 gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true,
146                                                       false);
147                 break;
148         case IRQ_TYPE_LEVEL_LOW:
149                 gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true,
150                                                       false);
151                 break;
152         case IRQ_TYPE_EDGE_RISING:
153                 gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
154                                                       false);
155                 break;
156         case IRQ_TYPE_EDGE_FALLING:
157                 gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false,
158                                                       false);
159                 break;
160         case IRQ_TYPE_EDGE_BOTH:
161                 if (!p->has_both_edge_trigger)
162                         return -EINVAL;
163                 gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
164                                                       true);
165                 break;
166         default:
167                 return -EINVAL;
168         }
169         return 0;
170 }
171
172 static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
173 {
174         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
175         struct gpio_rcar_priv *p = gpiochip_get_data(gc);
176         int error;
177
178         if (p->irq_parent) {
179                 error = irq_set_irq_wake(p->irq_parent, on);
180                 if (error) {
181                         dev_dbg(&p->pdev->dev,
182                                 "irq %u doesn't support irq_set_wake\n",
183                                 p->irq_parent);
184                         p->irq_parent = 0;
185                 }
186         }
187
188         if (!p->clk)
189                 return 0;
190
191         if (on)
192                 clk_enable(p->clk);
193         else
194                 clk_disable(p->clk);
195
196         return 0;
197 }
198
199 static void gpio_rcar_irq_bus_lock(struct irq_data *d)
200 {
201         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
202         struct gpio_rcar_priv *p = gpiochip_get_data(gc);
203
204         pm_runtime_get_sync(&p->pdev->dev);
205 }
206
207 static void gpio_rcar_irq_bus_sync_unlock(struct irq_data *d)
208 {
209         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
210         struct gpio_rcar_priv *p = gpiochip_get_data(gc);
211
212         pm_runtime_put(&p->pdev->dev);
213 }
214
215
216 static int gpio_rcar_irq_request_resources(struct irq_data *d)
217 {
218         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
219         struct gpio_rcar_priv *p = gpiochip_get_data(gc);
220         int error;
221
222         error = pm_runtime_get_sync(&p->pdev->dev);
223         if (error < 0)
224                 return error;
225
226         return 0;
227 }
228
229 static void gpio_rcar_irq_release_resources(struct irq_data *d)
230 {
231         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
232         struct gpio_rcar_priv *p = gpiochip_get_data(gc);
233
234         pm_runtime_put(&p->pdev->dev);
235 }
236
237 static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
238 {
239         struct gpio_rcar_priv *p = dev_id;
240         u32 pending;
241         unsigned int offset, irqs_handled = 0;
242
243         while ((pending = gpio_rcar_read(p, INTDT) &
244                           gpio_rcar_read(p, INTMSK))) {
245                 offset = __ffs(pending);
246                 gpio_rcar_write(p, INTCLR, BIT(offset));
247                 generic_handle_irq(irq_find_mapping(p->gpio_chip.irqdomain,
248                                                     offset));
249                 irqs_handled++;
250         }
251
252         return irqs_handled ? IRQ_HANDLED : IRQ_NONE;
253 }
254
255 static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
256                                                        unsigned int gpio,
257                                                        bool output)
258 {
259         struct gpio_rcar_priv *p = gpiochip_get_data(chip);
260         unsigned long flags;
261
262         /* follow steps in the GPIO documentation for
263          * "Setting General Output Mode" and
264          * "Setting General Input Mode"
265          */
266
267         spin_lock_irqsave(&p->lock, flags);
268
269         /* Configure postive logic in POSNEG */
270         gpio_rcar_modify_bit(p, POSNEG, gpio, false);
271
272         /* Select "General Input/Output Mode" in IOINTSEL */
273         gpio_rcar_modify_bit(p, IOINTSEL, gpio, false);
274
275         /* Select Input Mode or Output Mode in INOUTSEL */
276         gpio_rcar_modify_bit(p, INOUTSEL, gpio, output);
277
278         spin_unlock_irqrestore(&p->lock, flags);
279 }
280
281 static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
282 {
283         struct gpio_rcar_priv *p = gpiochip_get_data(chip);
284         int error;
285
286         error = pm_runtime_get_sync(&p->pdev->dev);
287         if (error < 0)
288                 return error;
289
290         error = pinctrl_request_gpio(chip->base + offset);
291         if (error)
292                 pm_runtime_put(&p->pdev->dev);
293
294         return error;
295 }
296
297 static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
298 {
299         struct gpio_rcar_priv *p = gpiochip_get_data(chip);
300
301         pinctrl_free_gpio(chip->base + offset);
302
303         /* Set the GPIO as an input to ensure that the next GPIO request won't
304          * drive the GPIO pin as an output.
305          */
306         gpio_rcar_config_general_input_output_mode(chip, offset, false);
307
308         pm_runtime_put(&p->pdev->dev);
309 }
310
311 static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
312 {
313         gpio_rcar_config_general_input_output_mode(chip, offset, false);
314         return 0;
315 }
316
317 static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
318 {
319         u32 bit = BIT(offset);
320
321         /* testing on r8a7790 shows that INDT does not show correct pin state
322          * when configured as output, so use OUTDT in case of output pins */
323         if (gpio_rcar_read(gpiochip_get_data(chip), INOUTSEL) & bit)
324                 return !!(gpio_rcar_read(gpiochip_get_data(chip), OUTDT) & bit);
325         else
326                 return !!(gpio_rcar_read(gpiochip_get_data(chip), INDT) & bit);
327 }
328
329 static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value)
330 {
331         struct gpio_rcar_priv *p = gpiochip_get_data(chip);
332         unsigned long flags;
333
334         spin_lock_irqsave(&p->lock, flags);
335         gpio_rcar_modify_bit(p, OUTDT, offset, value);
336         spin_unlock_irqrestore(&p->lock, flags);
337 }
338
339 static void gpio_rcar_set_multiple(struct gpio_chip *chip, unsigned long *mask,
340                                    unsigned long *bits)
341 {
342         struct gpio_rcar_priv *p = gpiochip_get_data(chip);
343         unsigned long flags;
344         u32 val, bankmask;
345
346         bankmask = mask[0] & GENMASK(chip->ngpio - 1, 0);
347         if (!bankmask)
348                 return;
349
350         spin_lock_irqsave(&p->lock, flags);
351         val = gpio_rcar_read(p, OUTDT);
352         val &= ~bankmask;
353         val |= (bankmask & bits[0]);
354         gpio_rcar_write(p, OUTDT, val);
355         spin_unlock_irqrestore(&p->lock, flags);
356 }
357
358 static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
359                                       int value)
360 {
361         /* write GPIO value to output before selecting output mode of pin */
362         gpio_rcar_set(chip, offset, value);
363         gpio_rcar_config_general_input_output_mode(chip, offset, true);
364         return 0;
365 }
366
367 struct gpio_rcar_info {
368         bool has_both_edge_trigger;
369         bool needs_clk;
370 };
371
372 static const struct gpio_rcar_info gpio_rcar_info_gen1 = {
373         .has_both_edge_trigger = false,
374         .needs_clk = false,
375 };
376
377 static const struct gpio_rcar_info gpio_rcar_info_gen2 = {
378         .has_both_edge_trigger = true,
379         .needs_clk = true,
380 };
381
382 static const struct of_device_id gpio_rcar_of_table[] = {
383         {
384                 .compatible = "renesas,gpio-r8a7790",
385                 .data = &gpio_rcar_info_gen2,
386         }, {
387                 .compatible = "renesas,gpio-r8a7791",
388                 .data = &gpio_rcar_info_gen2,
389         }, {
390                 .compatible = "renesas,gpio-r8a7793",
391                 .data = &gpio_rcar_info_gen2,
392         }, {
393                 .compatible = "renesas,gpio-r8a7794",
394                 .data = &gpio_rcar_info_gen2,
395         }, {
396                 .compatible = "renesas,gpio-r8a7795",
397                 /* Gen3 GPIO is identical to Gen2. */
398                 .data = &gpio_rcar_info_gen2,
399         }, {
400                 .compatible = "renesas,gpio-rcar",
401                 .data = &gpio_rcar_info_gen1,
402         }, {
403                 /* Terminator */
404         },
405 };
406
407 MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
408
409 static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins)
410 {
411         struct device_node *np = p->pdev->dev.of_node;
412         const struct of_device_id *match;
413         const struct gpio_rcar_info *info;
414         struct of_phandle_args args;
415         int ret;
416
417         match = of_match_node(gpio_rcar_of_table, np);
418         if (!match)
419                 return -EINVAL;
420
421         info = match->data;
422
423         ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args);
424         *npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK;
425         p->has_both_edge_trigger = info->has_both_edge_trigger;
426         p->needs_clk = info->needs_clk;
427
428         if (*npins == 0 || *npins > RCAR_MAX_GPIO_PER_BANK) {
429                 dev_warn(&p->pdev->dev,
430                          "Invalid number of gpio lines %u, using %u\n", *npins,
431                          RCAR_MAX_GPIO_PER_BANK);
432                 *npins = RCAR_MAX_GPIO_PER_BANK;
433         }
434
435         return 0;
436 }
437
438 static int gpio_rcar_probe(struct platform_device *pdev)
439 {
440         struct gpio_rcar_priv *p;
441         struct resource *io, *irq;
442         struct gpio_chip *gpio_chip;
443         struct irq_chip *irq_chip;
444         struct device *dev = &pdev->dev;
445         const char *name = dev_name(dev);
446         unsigned int npins;
447         int ret;
448
449         p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
450         if (!p)
451                 return -ENOMEM;
452
453         p->pdev = pdev;
454         spin_lock_init(&p->lock);
455
456         /* Get device configuration from DT node */
457         ret = gpio_rcar_parse_dt(p, &npins);
458         if (ret < 0)
459                 return ret;
460
461         platform_set_drvdata(pdev, p);
462
463         p->clk = devm_clk_get(dev, NULL);
464         if (IS_ERR(p->clk)) {
465                 if (p->needs_clk) {
466                         dev_err(dev, "unable to get clock\n");
467                         ret = PTR_ERR(p->clk);
468                         goto err0;
469                 }
470                 p->clk = NULL;
471         }
472
473         pm_runtime_enable(dev);
474
475         io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
476         irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
477
478         if (!io || !irq) {
479                 dev_err(dev, "missing IRQ or IOMEM\n");
480                 ret = -EINVAL;
481                 goto err0;
482         }
483
484         p->base = devm_ioremap_nocache(dev, io->start, resource_size(io));
485         if (!p->base) {
486                 dev_err(dev, "failed to remap I/O memory\n");
487                 ret = -ENXIO;
488                 goto err0;
489         }
490
491         gpio_chip = &p->gpio_chip;
492         gpio_chip->request = gpio_rcar_request;
493         gpio_chip->free = gpio_rcar_free;
494         gpio_chip->direction_input = gpio_rcar_direction_input;
495         gpio_chip->get = gpio_rcar_get;
496         gpio_chip->direction_output = gpio_rcar_direction_output;
497         gpio_chip->set = gpio_rcar_set;
498         gpio_chip->set_multiple = gpio_rcar_set_multiple;
499         gpio_chip->label = name;
500         gpio_chip->parent = dev;
501         gpio_chip->owner = THIS_MODULE;
502         gpio_chip->base = -1;
503         gpio_chip->ngpio = npins;
504
505         irq_chip = &p->irq_chip;
506         irq_chip->name = name;
507         irq_chip->irq_mask = gpio_rcar_irq_disable;
508         irq_chip->irq_unmask = gpio_rcar_irq_enable;
509         irq_chip->irq_set_type = gpio_rcar_irq_set_type;
510         irq_chip->irq_set_wake = gpio_rcar_irq_set_wake;
511         irq_chip->irq_bus_lock = gpio_rcar_irq_bus_lock;
512         irq_chip->irq_bus_sync_unlock = gpio_rcar_irq_bus_sync_unlock;
513         irq_chip->irq_request_resources = gpio_rcar_irq_request_resources;
514         irq_chip->irq_release_resources = gpio_rcar_irq_release_resources;
515         irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
516
517         ret = gpiochip_add_data(gpio_chip, p);
518         if (ret) {
519                 dev_err(dev, "failed to add GPIO controller\n");
520                 goto err0;
521         }
522
523         ret = gpiochip_irqchip_add(gpio_chip, irq_chip, 0, handle_level_irq,
524                                    IRQ_TYPE_NONE);
525         if (ret) {
526                 dev_err(dev, "cannot add irqchip\n");
527                 goto err1;
528         }
529
530         p->irq_parent = irq->start;
531         if (devm_request_irq(dev, irq->start, gpio_rcar_irq_handler,
532                              IRQF_SHARED, name, p)) {
533                 dev_err(dev, "failed to request IRQ\n");
534                 ret = -ENOENT;
535                 goto err1;
536         }
537
538         dev_info(dev, "driving %d GPIOs\n", npins);
539
540         return 0;
541
542 err1:
543         gpiochip_remove(gpio_chip);
544 err0:
545         pm_runtime_disable(dev);
546         return ret;
547 }
548
549 static int gpio_rcar_remove(struct platform_device *pdev)
550 {
551         struct gpio_rcar_priv *p = platform_get_drvdata(pdev);
552
553         gpiochip_remove(&p->gpio_chip);
554
555         pm_runtime_disable(&pdev->dev);
556         return 0;
557 }
558
559 static struct platform_driver gpio_rcar_device_driver = {
560         .probe          = gpio_rcar_probe,
561         .remove         = gpio_rcar_remove,
562         .driver         = {
563                 .name   = "gpio_rcar",
564                 .of_match_table = of_match_ptr(gpio_rcar_of_table),
565         }
566 };
567
568 module_platform_driver(gpio_rcar_device_driver);
569
570 MODULE_AUTHOR("Magnus Damm");
571 MODULE_DESCRIPTION("Renesas R-Car GPIO Driver");
572 MODULE_LICENSE("GPL v2");