2 * Copyright (c) 2006-2008 Intel Corporation
3 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
5 * DRM core CRTC related functions
7 * Permission to use, copy, modify, distribute, and sell this software and its
8 * documentation for any purpose is hereby granted without fee, provided that
9 * the above copyright notice appear in all copies and that both that copyright
10 * notice and this permission notice appear in supporting documentation, and
11 * that the name of the copyright holders not be used in advertising or
12 * publicity pertaining to distribution of the software without specific,
13 * written prior permission. The copyright holders make no representations
14 * about the suitability of this software for any purpose. It is provided "as
15 * is" without express or implied warranty.
17 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
18 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
19 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
20 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
21 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
22 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
27 * Eric Anholt <eric@anholt.net>
28 * Dave Airlie <airlied@linux.ie>
29 * Jesse Barnes <jesse.barnes@intel.com>
34 #include "drm_crtc_helper.h"
35 #include "drm_fb_helper.h"
37 static void drm_mode_validate_flag(struct drm_connector *connector,
40 struct drm_display_mode *mode, *t;
42 if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE))
45 list_for_each_entry_safe(mode, t, &connector->modes, head) {
46 if ((mode->flags & DRM_MODE_FLAG_INTERLACE) &&
47 !(flags & DRM_MODE_FLAG_INTERLACE))
48 mode->status = MODE_NO_INTERLACE;
49 if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) &&
50 !(flags & DRM_MODE_FLAG_DBLSCAN))
51 mode->status = MODE_NO_DBLESCAN;
58 * drm_helper_probe_connector_modes - get complete set of display modes
60 * @maxX: max width for modes
61 * @maxY: max height for modes
64 * Caller must hold mode config lock.
66 * Based on @dev's mode_config layout, scan all the connectors and try to detect
67 * modes on them. Modes will first be added to the connector's probed_modes
68 * list, then culled (based on validity and the @maxX, @maxY parameters) and
69 * put into the normal modes list.
71 * Intended to be used either at bootup time or when major configuration
72 * changes have occurred.
74 * FIXME: take into account monitor limits
77 * Number of modes found on @connector.
79 int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
80 uint32_t maxX, uint32_t maxY)
82 struct drm_device *dev = connector->dev;
83 struct drm_display_mode *mode, *t;
84 struct drm_connector_helper_funcs *connector_funcs =
85 connector->helper_private;
89 DRM_DEBUG_KMS("%s\n", drm_get_connector_name(connector));
90 /* set all modes to the unverified state */
91 list_for_each_entry_safe(mode, t, &connector->modes, head)
92 mode->status = MODE_UNVERIFIED;
94 if (connector->force) {
95 if (connector->force == DRM_FORCE_ON)
96 connector->status = connector_status_connected;
98 connector->status = connector_status_disconnected;
99 if (connector->funcs->force)
100 connector->funcs->force(connector);
102 connector->status = connector->funcs->detect(connector);
104 if (connector->status == connector_status_disconnected) {
105 DRM_DEBUG_KMS("%s is disconnected\n",
106 drm_get_connector_name(connector));
110 count = (*connector_funcs->get_modes)(connector);
112 count = drm_add_modes_noedid(connector, 1024, 768);
117 drm_mode_connector_list_update(connector);
120 drm_mode_validate_size(dev, &connector->modes, maxX,
123 if (connector->interlace_allowed)
124 mode_flags |= DRM_MODE_FLAG_INTERLACE;
125 if (connector->doublescan_allowed)
126 mode_flags |= DRM_MODE_FLAG_DBLSCAN;
127 drm_mode_validate_flag(connector, mode_flags);
129 list_for_each_entry_safe(mode, t, &connector->modes, head) {
130 if (mode->status == MODE_OK)
131 mode->status = connector_funcs->mode_valid(connector,
136 drm_mode_prune_invalid(dev, &connector->modes, true);
138 if (list_empty(&connector->modes))
141 drm_mode_sort(&connector->modes);
143 DRM_DEBUG_KMS("Probed modes for %s\n",
144 drm_get_connector_name(connector));
145 list_for_each_entry_safe(mode, t, &connector->modes, head) {
146 mode->vrefresh = drm_mode_vrefresh(mode);
148 drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
149 drm_mode_debug_printmodeline(mode);
154 EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
156 int drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX,
159 struct drm_connector *connector;
162 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
163 count += drm_helper_probe_single_connector_modes(connector,
169 EXPORT_SYMBOL(drm_helper_probe_connector_modes);
172 * drm_helper_encoder_in_use - check if a given encoder is in use
173 * @encoder: encoder to check
176 * Caller must hold mode config lock.
178 * Walk @encoders's DRM device's mode_config and see if it's in use.
181 * True if @encoder is part of the mode_config, false otherwise.
183 bool drm_helper_encoder_in_use(struct drm_encoder *encoder)
185 struct drm_connector *connector;
186 struct drm_device *dev = encoder->dev;
187 list_for_each_entry(connector, &dev->mode_config.connector_list, head)
188 if (connector->encoder == encoder)
192 EXPORT_SYMBOL(drm_helper_encoder_in_use);
195 * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
196 * @crtc: CRTC to check
199 * Caller must hold mode config lock.
201 * Walk @crtc's DRM device's mode_config and see if it's in use.
204 * True if @crtc is part of the mode_config, false otherwise.
206 bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
208 struct drm_encoder *encoder;
209 struct drm_device *dev = crtc->dev;
210 /* FIXME: Locking around list access? */
211 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
212 if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder))
216 EXPORT_SYMBOL(drm_helper_crtc_in_use);
219 * drm_disable_unused_functions - disable unused objects
223 * Caller must hold mode config lock.
225 * If an connector or CRTC isn't part of @dev's mode_config, it can be disabled
226 * by calling its dpms function, which should power it off.
228 void drm_helper_disable_unused_functions(struct drm_device *dev)
230 struct drm_encoder *encoder;
231 struct drm_connector *connector;
232 struct drm_encoder_helper_funcs *encoder_funcs;
233 struct drm_crtc *crtc;
235 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
236 if (!connector->encoder)
238 if (connector->status == connector_status_disconnected)
239 connector->encoder = NULL;
242 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
243 encoder_funcs = encoder->helper_private;
244 if (!drm_helper_encoder_in_use(encoder)) {
245 if (encoder_funcs->disable)
246 (*encoder_funcs->disable)(encoder);
248 (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
249 /* disconnector encoder from any connector */
250 encoder->crtc = NULL;
254 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
255 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
256 crtc->enabled = drm_helper_crtc_in_use(crtc);
257 if (!crtc->enabled) {
258 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
263 EXPORT_SYMBOL(drm_helper_disable_unused_functions);
265 static struct drm_display_mode *drm_has_preferred_mode(struct drm_connector *connector, int width, int height)
267 struct drm_display_mode *mode;
269 list_for_each_entry(mode, &connector->modes, head) {
270 if (drm_mode_width(mode) > width ||
271 drm_mode_height(mode) > height)
273 if (mode->type & DRM_MODE_TYPE_PREFERRED)
279 static bool drm_has_cmdline_mode(struct drm_connector *connector)
281 struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
282 struct drm_fb_helper_cmdline_mode *cmdline_mode;
287 cmdline_mode = &fb_help_conn->cmdline_mode;
288 return cmdline_mode->specified;
291 static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_connector *connector, int width, int height)
293 struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
294 struct drm_fb_helper_cmdline_mode *cmdline_mode;
295 struct drm_display_mode *mode = NULL;
300 cmdline_mode = &fb_help_conn->cmdline_mode;
301 if (cmdline_mode->specified == false)
304 /* attempt to find a matching mode in the list of modes
305 * we have gotten so far, if not add a CVT mode that conforms
307 if (cmdline_mode->rb || cmdline_mode->margins)
310 list_for_each_entry(mode, &connector->modes, head) {
311 /* check width/height */
312 if (mode->hdisplay != cmdline_mode->xres ||
313 mode->vdisplay != cmdline_mode->yres)
316 if (cmdline_mode->refresh_specified) {
317 if (mode->vrefresh != cmdline_mode->refresh)
321 if (cmdline_mode->interlace) {
322 if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
329 mode = drm_cvt_mode(connector->dev, cmdline_mode->xres,
331 cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
332 cmdline_mode->rb, cmdline_mode->interlace,
333 cmdline_mode->margins);
334 drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
335 list_add(&mode->head, &connector->modes);
339 static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
344 enable = connector->status == connector_status_connected;
346 enable = connector->status != connector_status_disconnected;
351 static void drm_enable_connectors(struct drm_device *dev, bool *enabled)
353 bool any_enabled = false;
354 struct drm_connector *connector;
357 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
358 enabled[i] = drm_connector_enabled(connector, true);
359 DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id,
360 enabled[i] ? "yes" : "no");
361 any_enabled |= enabled[i];
369 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
370 enabled[i] = drm_connector_enabled(connector, false);
375 static bool drm_target_preferred(struct drm_device *dev,
376 struct drm_display_mode **modes,
377 bool *enabled, int width, int height)
379 struct drm_connector *connector;
382 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
384 if (enabled[i] == false) {
389 DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
392 /* got for command line mode first */
393 modes[i] = drm_pick_cmdline_mode(connector, width, height);
395 DRM_DEBUG_KMS("looking for preferred mode on connector %d\n",
397 modes[i] = drm_has_preferred_mode(connector, width, height);
399 /* No preferred modes, pick one off the list */
400 if (!modes[i] && !list_empty(&connector->modes)) {
401 list_for_each_entry(modes[i], &connector->modes, head)
404 DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
411 static int drm_pick_crtcs(struct drm_device *dev,
412 struct drm_crtc **best_crtcs,
413 struct drm_display_mode **modes,
414 int n, int width, int height)
417 struct drm_connector *connector;
418 struct drm_connector_helper_funcs *connector_funcs;
419 struct drm_encoder *encoder;
420 struct drm_crtc *best_crtc;
421 int my_score, best_score, score;
422 struct drm_crtc **crtcs, *crtc;
424 if (n == dev->mode_config.num_connector)
427 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
433 best_crtcs[n] = NULL;
435 best_score = drm_pick_crtcs(dev, best_crtcs, modes, n+1, width, height);
436 if (modes[n] == NULL)
439 crtcs = kmalloc(dev->mode_config.num_connector *
440 sizeof(struct drm_crtc *), GFP_KERNEL);
445 if (connector->status == connector_status_connected)
447 if (drm_has_cmdline_mode(connector))
449 if (drm_has_preferred_mode(connector, width, height))
452 connector_funcs = connector->helper_private;
453 encoder = connector_funcs->best_encoder(connector);
457 connector->encoder = encoder;
459 /* select a crtc for this connector and then attempt to configure
460 remaining connectors */
462 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
464 if ((encoder->possible_crtcs & (1 << c)) == 0) {
469 for (o = 0; o < n; o++)
470 if (best_crtcs[o] == crtc)
474 /* ignore cloning for now */
480 memcpy(crtcs, best_crtcs, n * sizeof(struct drm_crtc *));
481 score = my_score + drm_pick_crtcs(dev, crtcs, modes, n + 1,
483 if (score > best_score) {
486 memcpy(best_crtcs, crtcs,
487 dev->mode_config.num_connector *
488 sizeof(struct drm_crtc *));
497 static void drm_setup_crtcs(struct drm_device *dev)
499 struct drm_crtc **crtcs;
500 struct drm_display_mode **modes;
501 struct drm_encoder *encoder;
502 struct drm_connector *connector;
509 width = dev->mode_config.max_width;
510 height = dev->mode_config.max_height;
512 /* clean out all the encoder/crtc combos */
513 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
514 encoder->crtc = NULL;
517 crtcs = kcalloc(dev->mode_config.num_connector,
518 sizeof(struct drm_crtc *), GFP_KERNEL);
519 modes = kcalloc(dev->mode_config.num_connector,
520 sizeof(struct drm_display_mode *), GFP_KERNEL);
521 enabled = kcalloc(dev->mode_config.num_connector,
522 sizeof(bool), GFP_KERNEL);
524 drm_enable_connectors(dev, enabled);
526 ret = drm_target_preferred(dev, modes, enabled, width, height);
528 DRM_ERROR("Unable to find initial modes\n");
530 DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n", width, height);
532 drm_pick_crtcs(dev, crtcs, modes, 0, width, height);
535 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
536 struct drm_display_mode *mode = modes[i];
537 struct drm_crtc *crtc = crtcs[i];
539 if (connector->encoder == NULL) {
545 DRM_DEBUG_KMS("desired mode %s set on crtc %d\n",
546 mode->name, crtc->base.id);
547 crtc->desired_mode = mode;
548 connector->encoder->crtc = crtc;
550 connector->encoder->crtc = NULL;
551 connector->encoder = NULL;
562 * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
563 * @encoder: encoder to test
564 * @crtc: crtc to test
566 * Return false if @encoder can't be driven by @crtc, true otherwise.
568 static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
569 struct drm_crtc *crtc)
571 struct drm_device *dev;
572 struct drm_crtc *tmp;
575 WARN(!crtc, "checking null crtc?");
579 list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
585 if (encoder->possible_crtcs & crtc_mask)
591 * Check the CRTC we're going to map each output to vs. its current
592 * CRTC. If they don't match, we have to disable the output and the CRTC
593 * since the driver will have to re-route things.
596 drm_crtc_prepare_encoders(struct drm_device *dev)
598 struct drm_encoder_helper_funcs *encoder_funcs;
599 struct drm_encoder *encoder;
601 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
602 encoder_funcs = encoder->helper_private;
603 /* Disable unused encoders */
604 if (encoder->crtc == NULL)
605 (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
606 /* Disable encoders whose CRTC is about to change */
607 if (encoder_funcs->get_crtc &&
608 encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
609 (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
614 * drm_crtc_set_mode - set a mode
615 * @crtc: CRTC to program
621 * Caller must hold mode config lock.
623 * Try to set @mode on @crtc. Give @crtc and its associated connectors a chance
624 * to fixup or reject the mode prior to trying to set it.
627 * True if the mode was set successfully, or false otherwise.
629 bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
630 struct drm_display_mode *mode,
632 struct drm_framebuffer *old_fb)
634 struct drm_device *dev = crtc->dev;
635 struct drm_display_mode *adjusted_mode, saved_mode;
636 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
637 struct drm_encoder_helper_funcs *encoder_funcs;
638 int saved_x, saved_y;
639 struct drm_encoder *encoder;
642 adjusted_mode = drm_mode_duplicate(dev, mode);
644 crtc->enabled = drm_helper_crtc_in_use(crtc);
649 saved_mode = crtc->mode;
653 /* Update crtc values up front so the driver can rely on them for mode
660 /* Pass our mode to the connectors and the CRTC to give them a chance to
661 * adjust it according to limitations or connector properties, and also
662 * a chance to reject the mode entirely.
664 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
666 if (encoder->crtc != crtc)
668 encoder_funcs = encoder->helper_private;
669 if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
675 if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
679 /* Prepare the encoders and CRTCs before setting the mode. */
680 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
682 if (encoder->crtc != crtc)
684 encoder_funcs = encoder->helper_private;
685 /* Disable the encoders as the first thing we do. */
686 encoder_funcs->prepare(encoder);
689 drm_crtc_prepare_encoders(dev);
691 crtc_funcs->prepare(crtc);
693 /* Set up the DPLL and any encoders state that needs to adjust or depend
696 ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
700 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
702 if (encoder->crtc != crtc)
705 DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
706 mode->name, mode->base.id);
707 encoder_funcs = encoder->helper_private;
708 encoder_funcs->mode_set(encoder, mode, adjusted_mode);
711 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
712 crtc_funcs->commit(crtc);
714 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
716 if (encoder->crtc != crtc)
719 encoder_funcs = encoder->helper_private;
720 encoder_funcs->commit(encoder);
724 /* XXX free adjustedmode */
725 drm_mode_destroy(dev, adjusted_mode);
726 /* FIXME: add subpixel order */
729 crtc->mode = saved_mode;
736 EXPORT_SYMBOL(drm_crtc_helper_set_mode);
740 * drm_crtc_helper_set_config - set a new config from userspace
741 * @crtc: CRTC to setup
742 * @crtc_info: user provided configuration
743 * @new_mode: new mode to set
744 * @connector_set: set of connectors for the new config
745 * @fb: new framebuffer
748 * Caller must hold mode config lock.
750 * Setup a new configuration, provided by the user in @crtc_info, and enable
756 int drm_crtc_helper_set_config(struct drm_mode_set *set)
758 struct drm_device *dev;
759 struct drm_crtc *save_crtcs, *new_crtc, *crtc;
760 struct drm_encoder *save_encoders, *new_encoder, *encoder;
761 struct drm_framebuffer *old_fb = NULL;
762 bool mode_changed = false; /* if true do a full mode set */
763 bool fb_changed = false; /* if true and !mode_changed just do a flip */
764 struct drm_connector *save_connectors, *connector;
765 int count = 0, ro, fail = 0;
766 struct drm_crtc_helper_funcs *crtc_funcs;
777 if (!set->crtc->helper_private)
780 crtc_funcs = set->crtc->helper_private;
782 DRM_DEBUG_KMS("crtc: %p %d fb: %p connectors: %p num_connectors:"
783 " %d (x, y) (%i, %i)\n",
784 set->crtc, set->crtc->base.id, set->fb, set->connectors,
785 (int)set->num_connectors, set->x, set->y);
787 dev = set->crtc->dev;
789 /* Allocate space for the backup of all (non-pointer) crtc, encoder and
791 save_crtcs = kzalloc(dev->mode_config.num_crtc *
792 sizeof(struct drm_crtc), GFP_KERNEL);
796 save_encoders = kzalloc(dev->mode_config.num_encoder *
797 sizeof(struct drm_encoder), GFP_KERNEL);
798 if (!save_encoders) {
803 save_connectors = kzalloc(dev->mode_config.num_connector *
804 sizeof(struct drm_connector), GFP_KERNEL);
805 if (!save_connectors) {
807 kfree(save_encoders);
811 /* Copy data. Note that driver private data is not affected.
812 * Should anything bad happen only the expected state is
813 * restored, not the drivers personal bookkeeping.
816 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
817 save_crtcs[count++] = *crtc;
821 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
822 save_encoders[count++] = *encoder;
826 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
827 save_connectors[count++] = *connector;
830 /* We should be able to check here if the fb has the same properties
831 * and then just flip_or_move it */
832 if (set->crtc->fb != set->fb) {
833 /* If we have no fb then treat it as a full mode set */
834 if (set->crtc->fb == NULL) {
835 DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
837 } else if (set->fb == NULL) {
839 } else if ((set->fb->bits_per_pixel !=
840 set->crtc->fb->bits_per_pixel) ||
841 set->fb->depth != set->crtc->fb->depth)
847 if (set->x != set->crtc->x || set->y != set->crtc->y)
850 if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
851 DRM_DEBUG_KMS("modes are different, full mode set\n");
852 drm_mode_debug_printmodeline(&set->crtc->mode);
853 drm_mode_debug_printmodeline(set->mode);
857 /* a) traverse passed in connector list and get encoders for them */
859 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
860 struct drm_connector_helper_funcs *connector_funcs =
861 connector->helper_private;
862 new_encoder = connector->encoder;
863 for (ro = 0; ro < set->num_connectors; ro++) {
864 if (set->connectors[ro] == connector) {
865 new_encoder = connector_funcs->best_encoder(connector);
866 /* if we can't get an encoder for a connector
867 we are setting now - then fail */
868 if (new_encoder == NULL)
869 /* don't break so fail path works correct */
875 if (new_encoder != connector->encoder) {
876 DRM_DEBUG_KMS("encoder changed, full mode switch\n");
878 /* If the encoder is reused for another connector, then
879 * the appropriate crtc will be set later.
881 if (connector->encoder)
882 connector->encoder->crtc = NULL;
883 connector->encoder = new_encoder;
893 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
894 if (!connector->encoder)
897 if (connector->encoder->crtc == set->crtc)
900 new_crtc = connector->encoder->crtc;
902 for (ro = 0; ro < set->num_connectors; ro++) {
903 if (set->connectors[ro] == connector)
904 new_crtc = set->crtc;
907 /* Make sure the new CRTC will work with the encoder */
909 !drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
913 if (new_crtc != connector->encoder->crtc) {
914 DRM_DEBUG_KMS("crtc changed, full mode switch\n");
916 connector->encoder->crtc = new_crtc;
918 DRM_DEBUG_KMS("setting connector %d crtc to %p\n",
919 connector->base.id, new_crtc);
922 /* mode_set_base is not a required function */
923 if (fb_changed && !crtc_funcs->mode_set_base)
927 old_fb = set->crtc->fb;
928 set->crtc->fb = set->fb;
929 set->crtc->enabled = (set->mode != NULL);
930 if (set->mode != NULL) {
931 DRM_DEBUG_KMS("attempting to set mode from"
933 drm_mode_debug_printmodeline(set->mode);
934 if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
937 DRM_ERROR("failed to set mode on crtc %p\n",
942 /* TODO are these needed? */
943 set->crtc->desired_x = set->x;
944 set->crtc->desired_y = set->y;
945 set->crtc->desired_mode = set->mode;
947 drm_helper_disable_unused_functions(dev);
948 } else if (fb_changed) {
949 set->crtc->x = set->x;
950 set->crtc->y = set->y;
952 old_fb = set->crtc->fb;
953 if (set->crtc->fb != set->fb)
954 set->crtc->fb = set->fb;
955 ret = crtc_funcs->mode_set_base(set->crtc,
956 set->x, set->y, old_fb);
961 kfree(save_connectors);
962 kfree(save_encoders);
967 /* Restore all previous data. */
969 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
970 *crtc = save_crtcs[count++];
974 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
975 *encoder = save_encoders[count++];
979 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
980 *connector = save_connectors[count++];
983 kfree(save_connectors);
984 kfree(save_encoders);
988 EXPORT_SYMBOL(drm_crtc_helper_set_config);
990 bool drm_helper_plugged_event(struct drm_device *dev)
994 drm_helper_probe_connector_modes(dev, dev->mode_config.max_width,
995 dev->mode_config.max_height);
997 drm_setup_crtcs(dev);
999 /* alert the driver fb layer */
1000 dev->mode_config.funcs->fb_changed(dev);
1002 /* FIXME: send hotplug event */
1006 * drm_initial_config - setup a sane initial connector configuration
1010 * Called at init time, must take mode config lock.
1012 * Scan the CRTCs and connectors and try to put together an initial setup.
1013 * At the moment, this is a cloned configuration across all heads with
1014 * a new framebuffer object as the backing store.
1017 * Zero if everything went ok, nonzero otherwise.
1019 bool drm_helper_initial_config(struct drm_device *dev)
1023 /* disable all the possible outputs/crtcs before entering KMS mode */
1024 drm_helper_disable_unused_functions(dev);
1026 drm_fb_helper_parse_command_line(dev);
1028 count = drm_helper_probe_connector_modes(dev,
1029 dev->mode_config.max_width,
1030 dev->mode_config.max_height);
1033 * we shouldn't end up with no modes here.
1035 WARN(!count, "No connectors reported connected with modes\n");
1037 drm_setup_crtcs(dev);
1039 /* alert the driver fb layer */
1040 dev->mode_config.funcs->fb_changed(dev);
1044 EXPORT_SYMBOL(drm_helper_initial_config);
1046 static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder)
1048 int dpms = DRM_MODE_DPMS_OFF;
1049 struct drm_connector *connector;
1050 struct drm_device *dev = encoder->dev;
1052 list_for_each_entry(connector, &dev->mode_config.connector_list, head)
1053 if (connector->encoder == encoder)
1054 if (connector->dpms < dpms)
1055 dpms = connector->dpms;
1059 static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
1061 int dpms = DRM_MODE_DPMS_OFF;
1062 struct drm_connector *connector;
1063 struct drm_device *dev = crtc->dev;
1065 list_for_each_entry(connector, &dev->mode_config.connector_list, head)
1066 if (connector->encoder && connector->encoder->crtc == crtc)
1067 if (connector->dpms < dpms)
1068 dpms = connector->dpms;
1073 * drm_helper_connector_dpms
1074 * @connector affected connector
1077 * Calls the low-level connector DPMS function, then
1078 * calls appropriate encoder and crtc DPMS functions as well
1080 void drm_helper_connector_dpms(struct drm_connector *connector, int mode)
1082 struct drm_encoder *encoder = connector->encoder;
1083 struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
1086 if (mode == connector->dpms)
1089 old_dpms = connector->dpms;
1090 connector->dpms = mode;
1092 /* from off to on, do crtc then encoder */
1093 if (mode < old_dpms) {
1095 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
1096 if (crtc_funcs->dpms)
1097 (*crtc_funcs->dpms) (crtc,
1098 drm_helper_choose_crtc_dpms(crtc));
1101 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
1102 if (encoder_funcs->dpms)
1103 (*encoder_funcs->dpms) (encoder,
1104 drm_helper_choose_encoder_dpms(encoder));
1108 /* from on to off, do encoder then crtc */
1109 if (mode > old_dpms) {
1111 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
1112 if (encoder_funcs->dpms)
1113 (*encoder_funcs->dpms) (encoder,
1114 drm_helper_choose_encoder_dpms(encoder));
1117 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
1118 if (crtc_funcs->dpms)
1119 (*crtc_funcs->dpms) (crtc,
1120 drm_helper_choose_crtc_dpms(crtc));
1126 EXPORT_SYMBOL(drm_helper_connector_dpms);
1129 * drm_hotplug_stage_two
1131 * @connector hotpluged connector
1134 * Caller must hold mode config lock, function might grab struct lock.
1136 * Stage two of a hotplug.
1139 * Zero on success, errno on failure.
1141 int drm_helper_hotplug_stage_two(struct drm_device *dev)
1143 drm_helper_plugged_event(dev);
1147 EXPORT_SYMBOL(drm_helper_hotplug_stage_two);
1149 int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
1150 struct drm_mode_fb_cmd *mode_cmd)
1152 fb->width = mode_cmd->width;
1153 fb->height = mode_cmd->height;
1154 fb->pitch = mode_cmd->pitch;
1155 fb->bits_per_pixel = mode_cmd->bpp;
1156 fb->depth = mode_cmd->depth;
1160 EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
1162 int drm_helper_resume_force_mode(struct drm_device *dev)
1164 struct drm_crtc *crtc;
1167 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
1172 ret = drm_crtc_helper_set_mode(crtc, &crtc->mode,
1173 crtc->x, crtc->y, crtc->fb);
1176 DRM_ERROR("failed to set mode on crtc %p\n", crtc);
1178 /* disable the unused connectors while restoring the modesetting */
1179 drm_helper_disable_unused_functions(dev);
1182 EXPORT_SYMBOL(drm_helper_resume_force_mode);