2 * Copyright (c) 2006 Luc Verhaegen (quirks list)
3 * Copyright (c) 2007-2008 Intel Corporation
4 * Jesse Barnes <jesse.barnes@intel.com>
5 * Copyright 2010 Red Hat, Inc.
7 * DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from
9 * Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com>
11 * Permission is hereby granted, free of charge, to any person obtaining a
12 * copy of this software and associated documentation files (the "Software"),
13 * to deal in the Software without restriction, including without limitation
14 * the rights to use, copy, modify, merge, publish, distribute, sub license,
15 * and/or sell copies of the Software, and to permit persons to whom the
16 * Software is furnished to do so, subject to the following conditions:
18 * The above copyright notice and this permission notice (including the
19 * next paragraph) shall be included in all copies or substantial portions
22 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
23 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
24 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
25 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
26 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
27 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
28 * DEALINGS IN THE SOFTWARE.
30 #include <linux/kernel.h>
31 #include <linux/slab.h>
32 #include <linux/i2c.h>
33 #include <linux/export.h>
36 #include "drm_edid_modes.h"
38 #define version_greater(edid, maj, min) \
39 (((edid)->version > (maj)) || \
40 ((edid)->version == (maj) && (edid)->revision > (min)))
42 #define EDID_EST_TIMINGS 16
43 #define EDID_STD_TIMINGS 8
44 #define EDID_DETAILED_TIMINGS 4
47 * EDID blocks out in the wild have a variety of bugs, try to collect
48 * them here (note that userspace may work around broken monitors first,
49 * but fixes should make their way here so that the kernel "just works"
50 * on as many displays as possible).
53 /* First detailed mode wrong, use largest 60Hz mode */
54 #define EDID_QUIRK_PREFER_LARGE_60 (1 << 0)
55 /* Reported 135MHz pixel clock is too high, needs adjustment */
56 #define EDID_QUIRK_135_CLOCK_TOO_HIGH (1 << 1)
57 /* Prefer the largest mode at 75 Hz */
58 #define EDID_QUIRK_PREFER_LARGE_75 (1 << 2)
59 /* Detail timing is in cm not mm */
60 #define EDID_QUIRK_DETAILED_IN_CM (1 << 3)
61 /* Detailed timing descriptors have bogus size values, so just take the
62 * maximum size and use that.
64 #define EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE (1 << 4)
65 /* Monitor forgot to set the first detailed is preferred bit. */
66 #define EDID_QUIRK_FIRST_DETAILED_PREFERRED (1 << 5)
67 /* use +hsync +vsync for detailed mode */
68 #define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6)
70 struct detailed_mode_closure {
71 struct drm_connector *connector;
83 static struct edid_quirk {
87 } edid_quirk_list[] = {
89 { "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 },
91 { "API", 0x7602, EDID_QUIRK_PREFER_LARGE_60 },
93 { "ACR", 2423, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
95 /* Belinea 10 15 55 */
96 { "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 },
97 { "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 },
99 /* Envision Peripherals, Inc. EN-7100e */
100 { "EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH },
101 /* Envision EN2028 */
102 { "EPI", 8232, EDID_QUIRK_PREFER_LARGE_60 },
104 /* Funai Electronics PM36B */
105 { "FCM", 13600, EDID_QUIRK_PREFER_LARGE_75 |
106 EDID_QUIRK_DETAILED_IN_CM },
108 /* LG Philips LCD LP154W01-A5 */
109 { "LPL", 0, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
110 { "LPL", 0x2a00, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
112 /* Philips 107p5 CRT */
113 { "PHL", 57364, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
116 { "PTS", 765, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
118 /* Samsung SyncMaster 205BW. Note: irony */
119 { "SAM", 541, EDID_QUIRK_DETAILED_SYNC_PP },
120 /* Samsung SyncMaster 22[5-6]BW */
121 { "SAM", 596, EDID_QUIRK_PREFER_LARGE_60 },
122 { "SAM", 638, EDID_QUIRK_PREFER_LARGE_60 },
125 /*** DDC fetch and block validation ***/
127 static const u8 edid_header[] = {
128 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
132 * Sanity check the header of the base EDID block. Return 8 if the header
133 * is perfect, down to 0 if it's totally wrong.
135 int drm_edid_header_is_valid(const u8 *raw_edid)
139 for (i = 0; i < sizeof(edid_header); i++)
140 if (raw_edid[i] == edid_header[i])
145 EXPORT_SYMBOL(drm_edid_header_is_valid);
149 * Sanity check the EDID block (base or extension). Return 0 if the block
150 * doesn't check out, or 1 if it's valid.
152 bool drm_edid_block_valid(u8 *raw_edid)
156 struct edid *edid = (struct edid *)raw_edid;
158 if (raw_edid[0] == 0x00) {
159 int score = drm_edid_header_is_valid(raw_edid);
161 else if (score >= 6) {
162 DRM_DEBUG("Fixing EDID header, your hardware may be failing\n");
163 memcpy(raw_edid, edid_header, sizeof(edid_header));
169 for (i = 0; i < EDID_LENGTH; i++)
172 DRM_ERROR("EDID checksum is invalid, remainder is %d\n", csum);
174 /* allow CEA to slide through, switches mangle this */
175 if (raw_edid[0] != 0x02)
179 /* per-block-type checks */
180 switch (raw_edid[0]) {
182 if (edid->version != 1) {
183 DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
187 if (edid->revision > 4)
188 DRM_DEBUG("EDID minor > 4, assuming backward compatibility\n");
199 printk(KERN_ERR "Raw EDID:\n");
200 print_hex_dump(KERN_ERR, " \t", DUMP_PREFIX_NONE, 16, 1,
201 raw_edid, EDID_LENGTH, false);
205 EXPORT_SYMBOL(drm_edid_block_valid);
208 * drm_edid_is_valid - sanity check EDID data
211 * Sanity-check an entire EDID record (including extensions)
213 bool drm_edid_is_valid(struct edid *edid)
216 u8 *raw = (u8 *)edid;
221 for (i = 0; i <= edid->extensions; i++)
222 if (!drm_edid_block_valid(raw + i * EDID_LENGTH))
227 EXPORT_SYMBOL(drm_edid_is_valid);
229 #define DDC_SEGMENT_ADDR 0x30
231 * Get EDID information via I2C.
233 * \param adapter : i2c device adaptor
234 * \param buf : EDID data buffer to be filled
235 * \param len : EDID data buffer length
236 * \return 0 on success or -1 on failure.
238 * Try to fetch EDID information by calling i2c driver function.
241 drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
244 unsigned char start = block * EDID_LENGTH;
245 int ret, retries = 5;
247 /* The core i2c driver will automatically retry the transfer if the
248 * adapter reports EAGAIN. However, we find that bit-banging transfers
249 * are susceptible to errors under a heavily loaded machine and
250 * generate spurious NAKs and timeouts. Retrying the transfer
251 * of the individual block a few times seems to overcome this.
254 struct i2c_msg msgs[] = {
267 ret = i2c_transfer(adapter, msgs, 2);
269 DRM_DEBUG_KMS("drm: skipping non-existent adapter %s\n",
273 } while (ret != 2 && --retries);
275 return ret == 2 ? 0 : -1;
278 static bool drm_edid_is_zero(u8 *in_edid, int length)
281 u32 *raw_edid = (u32 *)in_edid;
283 for (i = 0; i < length / 4; i++)
284 if (*(raw_edid + i) != 0)
290 drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
292 int i, j = 0, valid_extensions = 0;
295 if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
298 /* base block fetch */
299 for (i = 0; i < 4; i++) {
300 if (drm_do_probe_ddc_edid(adapter, block, 0, EDID_LENGTH))
302 if (drm_edid_block_valid(block))
304 if (i == 0 && drm_edid_is_zero(block, EDID_LENGTH)) {
305 connector->null_edid_counter++;
312 /* if there's no extensions, we're done */
313 if (block[0x7e] == 0)
316 new = krealloc(block, (block[0x7e] + 1) * EDID_LENGTH, GFP_KERNEL);
321 for (j = 1; j <= block[0x7e]; j++) {
322 for (i = 0; i < 4; i++) {
323 if (drm_do_probe_ddc_edid(adapter,
324 block + (valid_extensions + 1) * EDID_LENGTH,
327 if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH)) {
333 dev_warn(connector->dev->dev,
334 "%s: Ignoring invalid EDID block %d.\n",
335 drm_get_connector_name(connector), j);
338 if (valid_extensions != block[0x7e]) {
339 block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
340 block[0x7e] = valid_extensions;
341 new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
350 dev_warn(connector->dev->dev, "%s: EDID block %d invalid.\n",
351 drm_get_connector_name(connector), j);
359 * Probe DDC presence.
361 * \param adapter : i2c device adaptor
362 * \return 1 on success
365 drm_probe_ddc(struct i2c_adapter *adapter)
369 return (drm_do_probe_ddc_edid(adapter, &out, 0, 1) == 0);
373 * drm_get_edid - get EDID data, if available
374 * @connector: connector we're probing
375 * @adapter: i2c adapter to use for DDC
377 * Poke the given i2c channel to grab EDID data if possible. If found,
378 * attach it to the connector.
380 * Return edid data or NULL if we couldn't find any.
382 struct edid *drm_get_edid(struct drm_connector *connector,
383 struct i2c_adapter *adapter)
385 struct edid *edid = NULL;
387 if (drm_probe_ddc(adapter))
388 edid = (struct edid *)drm_do_get_edid(connector, adapter);
390 connector->display_info.raw_edid = (char *)edid;
395 EXPORT_SYMBOL(drm_get_edid);
397 /*** EDID parsing ***/
400 * edid_vendor - match a string against EDID's obfuscated vendor field
401 * @edid: EDID to match
402 * @vendor: vendor string
404 * Returns true if @vendor is in @edid, false otherwise
406 static bool edid_vendor(struct edid *edid, char *vendor)
410 edid_vendor[0] = ((edid->mfg_id[0] & 0x7c) >> 2) + '@';
411 edid_vendor[1] = (((edid->mfg_id[0] & 0x3) << 3) |
412 ((edid->mfg_id[1] & 0xe0) >> 5)) + '@';
413 edid_vendor[2] = (edid->mfg_id[1] & 0x1f) + '@';
415 return !strncmp(edid_vendor, vendor, 3);
419 * edid_get_quirks - return quirk flags for a given EDID
420 * @edid: EDID to process
422 * This tells subsequent routines what fixes they need to apply.
424 static u32 edid_get_quirks(struct edid *edid)
426 struct edid_quirk *quirk;
429 for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) {
430 quirk = &edid_quirk_list[i];
432 if (edid_vendor(edid, quirk->vendor) &&
433 (EDID_PRODUCT_ID(edid) == quirk->product_id))
434 return quirk->quirks;
440 #define MODE_SIZE(m) ((m)->hdisplay * (m)->vdisplay)
441 #define MODE_REFRESH_DIFF(m,r) (abs((m)->vrefresh - target_refresh))
444 * edid_fixup_preferred - set preferred modes based on quirk list
445 * @connector: has mode list to fix up
446 * @quirks: quirks list
448 * Walk the mode list for @connector, clearing the preferred status
449 * on existing modes and setting it anew for the right mode ala @quirks.
451 static void edid_fixup_preferred(struct drm_connector *connector,
454 struct drm_display_mode *t, *cur_mode, *preferred_mode;
455 int target_refresh = 0;
457 if (list_empty(&connector->probed_modes))
460 if (quirks & EDID_QUIRK_PREFER_LARGE_60)
462 if (quirks & EDID_QUIRK_PREFER_LARGE_75)
465 preferred_mode = list_first_entry(&connector->probed_modes,
466 struct drm_display_mode, head);
468 list_for_each_entry_safe(cur_mode, t, &connector->probed_modes, head) {
469 cur_mode->type &= ~DRM_MODE_TYPE_PREFERRED;
471 if (cur_mode == preferred_mode)
474 /* Largest mode is preferred */
475 if (MODE_SIZE(cur_mode) > MODE_SIZE(preferred_mode))
476 preferred_mode = cur_mode;
478 /* At a given size, try to get closest to target refresh */
479 if ((MODE_SIZE(cur_mode) == MODE_SIZE(preferred_mode)) &&
480 MODE_REFRESH_DIFF(cur_mode, target_refresh) <
481 MODE_REFRESH_DIFF(preferred_mode, target_refresh)) {
482 preferred_mode = cur_mode;
486 preferred_mode->type |= DRM_MODE_TYPE_PREFERRED;
490 mode_is_rb(const struct drm_display_mode *mode)
492 return (mode->htotal - mode->hdisplay == 160) &&
493 (mode->hsync_end - mode->hdisplay == 80) &&
494 (mode->hsync_end - mode->hsync_start == 32) &&
495 (mode->vsync_start - mode->vdisplay == 3);
499 * drm_mode_find_dmt - Create a copy of a mode if present in DMT
500 * @dev: Device to duplicate against
502 * @vsize: Mode height
503 * @fresh: Mode refresh rate
504 * @rb: Mode reduced-blanking-ness
506 * Walk the DMT mode list looking for a match for the given parameters.
507 * Return a newly allocated copy of the mode, or NULL if not found.
509 struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
510 int hsize, int vsize, int fresh,
515 for (i = 0; i < drm_num_dmt_modes; i++) {
516 const struct drm_display_mode *ptr = &drm_dmt_modes[i];
517 if (hsize != ptr->hdisplay)
519 if (vsize != ptr->vdisplay)
521 if (fresh != drm_mode_vrefresh(ptr))
523 if (rb != mode_is_rb(ptr))
526 return drm_mode_duplicate(dev, ptr);
531 EXPORT_SYMBOL(drm_mode_find_dmt);
533 typedef void detailed_cb(struct detailed_timing *timing, void *closure);
536 cea_for_each_detailed_block(u8 *ext, detailed_cb *cb, void *closure)
540 u8 *det_base = ext + d;
543 for (i = 0; i < n; i++)
544 cb((struct detailed_timing *)(det_base + 18 * i), closure);
548 vtb_for_each_detailed_block(u8 *ext, detailed_cb *cb, void *closure)
550 unsigned int i, n = min((int)ext[0x02], 6);
551 u8 *det_base = ext + 5;
554 return; /* unknown version */
556 for (i = 0; i < n; i++)
557 cb((struct detailed_timing *)(det_base + 18 * i), closure);
561 drm_for_each_detailed_block(u8 *raw_edid, detailed_cb *cb, void *closure)
564 struct edid *edid = (struct edid *)raw_edid;
569 for (i = 0; i < EDID_DETAILED_TIMINGS; i++)
570 cb(&(edid->detailed_timings[i]), closure);
572 for (i = 1; i <= raw_edid[0x7e]; i++) {
573 u8 *ext = raw_edid + (i * EDID_LENGTH);
576 cea_for_each_detailed_block(ext, cb, closure);
579 vtb_for_each_detailed_block(ext, cb, closure);
588 is_rb(struct detailed_timing *t, void *data)
591 if (r[3] == EDID_DETAIL_MONITOR_RANGE)
593 *(bool *)data = true;
596 /* EDID 1.4 defines this explicitly. For EDID 1.3, we guess, badly. */
598 drm_monitor_supports_rb(struct edid *edid)
600 if (edid->revision >= 4) {
602 drm_for_each_detailed_block((u8 *)edid, is_rb, &ret);
606 return ((edid->input & DRM_EDID_INPUT_DIGITAL) != 0);
610 find_gtf2(struct detailed_timing *t, void *data)
613 if (r[3] == EDID_DETAIL_MONITOR_RANGE && r[10] == 0x02)
617 /* Secondary GTF curve kicks in above some break frequency */
619 drm_gtf2_hbreak(struct edid *edid)
622 drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
623 return r ? (r[12] * 2) : 0;
627 drm_gtf2_2c(struct edid *edid)
630 drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
631 return r ? r[13] : 0;
635 drm_gtf2_m(struct edid *edid)
638 drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
639 return r ? (r[15] << 8) + r[14] : 0;
643 drm_gtf2_k(struct edid *edid)
646 drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
647 return r ? r[16] : 0;
651 drm_gtf2_2j(struct edid *edid)
654 drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
655 return r ? r[17] : 0;
659 * standard_timing_level - get std. timing level(CVT/GTF/DMT)
660 * @edid: EDID block to scan
662 static int standard_timing_level(struct edid *edid)
664 if (edid->revision >= 2) {
665 if (edid->revision >= 4 && (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF))
667 if (drm_gtf2_hbreak(edid))
675 * 0 is reserved. The spec says 0x01 fill for unused timings. Some old
676 * monitors fill with ascii space (0x20) instead.
679 bad_std_timing(u8 a, u8 b)
681 return (a == 0x00 && b == 0x00) ||
682 (a == 0x01 && b == 0x01) ||
683 (a == 0x20 && b == 0x20);
687 * drm_mode_std - convert standard mode info (width, height, refresh) into mode
688 * @t: standard timing params
689 * @timing_level: standard timing level
691 * Take the standard timing params (in this case width, aspect, and refresh)
692 * and convert them into a real mode using CVT/GTF/DMT.
694 static struct drm_display_mode *
695 drm_mode_std(struct drm_connector *connector, struct edid *edid,
696 struct std_timing *t, int revision)
698 struct drm_device *dev = connector->dev;
699 struct drm_display_mode *m, *mode = NULL;
702 unsigned aspect_ratio = (t->vfreq_aspect & EDID_TIMING_ASPECT_MASK)
703 >> EDID_TIMING_ASPECT_SHIFT;
704 unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK)
705 >> EDID_TIMING_VFREQ_SHIFT;
706 int timing_level = standard_timing_level(edid);
708 if (bad_std_timing(t->hsize, t->vfreq_aspect))
711 /* According to the EDID spec, the hdisplay = hsize * 8 + 248 */
712 hsize = t->hsize * 8 + 248;
713 /* vrefresh_rate = vfreq + 60 */
714 vrefresh_rate = vfreq + 60;
715 /* the vdisplay is calculated based on the aspect ratio */
716 if (aspect_ratio == 0) {
720 vsize = (hsize * 10) / 16;
721 } else if (aspect_ratio == 1)
722 vsize = (hsize * 3) / 4;
723 else if (aspect_ratio == 2)
724 vsize = (hsize * 4) / 5;
726 vsize = (hsize * 9) / 16;
728 /* HDTV hack, part 1 */
729 if (vrefresh_rate == 60 &&
730 ((hsize == 1360 && vsize == 765) ||
731 (hsize == 1368 && vsize == 769))) {
737 * If this connector already has a mode for this size and refresh
738 * rate (because it came from detailed or CVT info), use that
739 * instead. This way we don't have to guess at interlace or
742 list_for_each_entry(m, &connector->probed_modes, head)
743 if (m->hdisplay == hsize && m->vdisplay == vsize &&
744 drm_mode_vrefresh(m) == vrefresh_rate)
747 /* HDTV hack, part 2 */
748 if (hsize == 1366 && vsize == 768 && vrefresh_rate == 60) {
749 mode = drm_cvt_mode(dev, 1366, 768, vrefresh_rate, 0, 0,
751 mode->hdisplay = 1366;
752 mode->hsync_start = mode->hsync_start - 1;
753 mode->hsync_end = mode->hsync_end - 1;
757 /* check whether it can be found in default mode table */
758 if (drm_monitor_supports_rb(edid)) {
759 mode = drm_mode_find_dmt(dev, hsize, vsize, vrefresh_rate,
764 mode = drm_mode_find_dmt(dev, hsize, vsize, vrefresh_rate, false);
768 /* okay, generate it */
769 switch (timing_level) {
773 mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
777 * This is potentially wrong if there's ever a monitor with
778 * more than one ranges section, each claiming a different
779 * secondary GTF curve. Please don't do that.
781 mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
782 if (drm_mode_hsync(mode) > drm_gtf2_hbreak(edid)) {
783 drm_mode_destroy(dev, mode);
784 mode = drm_gtf_mode_complex(dev, hsize, vsize,
793 mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
801 * EDID is delightfully ambiguous about how interlaced modes are to be
802 * encoded. Our internal representation is of frame height, but some
803 * HDTV detailed timings are encoded as field height.
805 * The format list here is from CEA, in frame size. Technically we
806 * should be checking refresh rate too. Whatever.
809 drm_mode_do_interlace_quirk(struct drm_display_mode *mode,
810 struct detailed_pixel_timing *pt)
813 static const struct {
815 } cea_interlaced[] = {
825 if (!(pt->misc & DRM_EDID_PT_INTERLACED))
828 for (i = 0; i < ARRAY_SIZE(cea_interlaced); i++) {
829 if ((mode->hdisplay == cea_interlaced[i].w) &&
830 (mode->vdisplay == cea_interlaced[i].h / 2)) {
832 mode->vsync_start *= 2;
833 mode->vsync_end *= 2;
839 mode->flags |= DRM_MODE_FLAG_INTERLACE;
843 * drm_mode_detailed - create a new mode from an EDID detailed timing section
844 * @dev: DRM device (needed to create new mode)
846 * @timing: EDID detailed timing info
847 * @quirks: quirks to apply
849 * An EDID detailed timing block contains enough info for us to create and
850 * return a new struct drm_display_mode.
852 static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
854 struct detailed_timing *timing,
857 struct drm_display_mode *mode;
858 struct detailed_pixel_timing *pt = &timing->data.pixel_data;
859 unsigned hactive = (pt->hactive_hblank_hi & 0xf0) << 4 | pt->hactive_lo;
860 unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo;
861 unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo;
862 unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
863 unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
864 unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
865 unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
866 unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
868 /* ignore tiny modes */
869 if (hactive < 64 || vactive < 64)
872 if (pt->misc & DRM_EDID_PT_STEREO) {
873 printk(KERN_WARNING "stereo mode not supported\n");
876 if (!(pt->misc & DRM_EDID_PT_SEPARATE_SYNC)) {
877 printk(KERN_WARNING "composite sync not supported\n");
880 /* it is incorrect if hsync/vsync width is zero */
881 if (!hsync_pulse_width || !vsync_pulse_width) {
882 DRM_DEBUG_KMS("Incorrect Detailed timing. "
883 "Wrong Hsync/Vsync pulse width\n");
886 mode = drm_mode_create(dev);
890 mode->type = DRM_MODE_TYPE_DRIVER;
892 if (quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH)
893 timing->pixel_clock = cpu_to_le16(1088);
895 mode->clock = le16_to_cpu(timing->pixel_clock) * 10;
897 mode->hdisplay = hactive;
898 mode->hsync_start = mode->hdisplay + hsync_offset;
899 mode->hsync_end = mode->hsync_start + hsync_pulse_width;
900 mode->htotal = mode->hdisplay + hblank;
902 mode->vdisplay = vactive;
903 mode->vsync_start = mode->vdisplay + vsync_offset;
904 mode->vsync_end = mode->vsync_start + vsync_pulse_width;
905 mode->vtotal = mode->vdisplay + vblank;
907 /* Some EDIDs have bogus h/vtotal values */
908 if (mode->hsync_end > mode->htotal)
909 mode->htotal = mode->hsync_end + 1;
910 if (mode->vsync_end > mode->vtotal)
911 mode->vtotal = mode->vsync_end + 1;
913 drm_mode_do_interlace_quirk(mode, pt);
915 drm_mode_set_name(mode);
917 if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
918 pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;
921 mode->flags |= (pt->misc & DRM_EDID_PT_HSYNC_POSITIVE) ?
922 DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC;
923 mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
924 DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
926 mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
927 mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
929 if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
930 mode->width_mm *= 10;
931 mode->height_mm *= 10;
934 if (quirks & EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE) {
935 mode->width_mm = edid->width_cm * 10;
936 mode->height_mm = edid->height_cm * 10;
943 mode_in_hsync_range(const struct drm_display_mode *mode,
944 struct edid *edid, u8 *t)
946 int hsync, hmin, hmax;
949 if (edid->revision >= 4)
950 hmin += ((t[4] & 0x04) ? 255 : 0);
952 if (edid->revision >= 4)
953 hmax += ((t[4] & 0x08) ? 255 : 0);
954 hsync = drm_mode_hsync(mode);
956 return (hsync <= hmax && hsync >= hmin);
960 mode_in_vsync_range(const struct drm_display_mode *mode,
961 struct edid *edid, u8 *t)
963 int vsync, vmin, vmax;
966 if (edid->revision >= 4)
967 vmin += ((t[4] & 0x01) ? 255 : 0);
969 if (edid->revision >= 4)
970 vmax += ((t[4] & 0x02) ? 255 : 0);
971 vsync = drm_mode_vrefresh(mode);
973 return (vsync <= vmax && vsync >= vmin);
977 range_pixel_clock(struct edid *edid, u8 *t)
980 if (t[9] == 0 || t[9] == 255)
983 /* 1.4 with CVT support gives us real precision, yay */
984 if (edid->revision >= 4 && t[10] == 0x04)
985 return (t[9] * 10000) - ((t[12] >> 2) * 250);
987 /* 1.3 is pathetic, so fuzz up a bit */
988 return t[9] * 10000 + 5001;
992 mode_in_range(const struct drm_display_mode *mode, struct edid *edid,
993 struct detailed_timing *timing)
996 u8 *t = (u8 *)timing;
998 if (!mode_in_hsync_range(mode, edid, t))
1001 if (!mode_in_vsync_range(mode, edid, t))
1004 if ((max_clock = range_pixel_clock(edid, t)))
1005 if (mode->clock > max_clock)
1008 /* 1.4 max horizontal check */
1009 if (edid->revision >= 4 && t[10] == 0x04)
1010 if (t[13] && mode->hdisplay > 8 * (t[13] + (256 * (t[12]&0x3))))
1013 if (mode_is_rb(mode) && !drm_monitor_supports_rb(edid))
1020 * XXX If drm_dmt_modes ever regrows the CVT-R modes (and it will) this will
1021 * need to account for them.
1024 drm_gtf_modes_for_range(struct drm_connector *connector, struct edid *edid,
1025 struct detailed_timing *timing)
1028 struct drm_display_mode *newmode;
1029 struct drm_device *dev = connector->dev;
1031 for (i = 0; i < drm_num_dmt_modes; i++) {
1032 if (mode_in_range(drm_dmt_modes + i, edid, timing)) {
1033 newmode = drm_mode_duplicate(dev, &drm_dmt_modes[i]);
1035 drm_mode_probed_add(connector, newmode);
1045 do_inferred_modes(struct detailed_timing *timing, void *c)
1047 struct detailed_mode_closure *closure = c;
1048 struct detailed_non_pixel *data = &timing->data.other_data;
1049 int gtf = (closure->edid->features & DRM_EDID_FEATURE_DEFAULT_GTF);
1051 if (gtf && data->type == EDID_DETAIL_MONITOR_RANGE)
1052 closure->modes += drm_gtf_modes_for_range(closure->connector,
1058 add_inferred_modes(struct drm_connector *connector, struct edid *edid)
1060 struct detailed_mode_closure closure = {
1061 connector, edid, 0, 0, 0
1064 if (version_greater(edid, 1, 0))
1065 drm_for_each_detailed_block((u8 *)edid, do_inferred_modes,
1068 return closure.modes;
1072 drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing)
1074 int i, j, m, modes = 0;
1075 struct drm_display_mode *mode;
1076 u8 *est = ((u8 *)timing) + 5;
1078 for (i = 0; i < 6; i++) {
1079 for (j = 7; j > 0; j--) {
1080 m = (i * 8) + (7 - j);
1081 if (m >= ARRAY_SIZE(est3_modes))
1083 if (est[i] & (1 << j)) {
1084 mode = drm_mode_find_dmt(connector->dev,
1090 drm_mode_probed_add(connector, mode);
1101 do_established_modes(struct detailed_timing *timing, void *c)
1103 struct detailed_mode_closure *closure = c;
1104 struct detailed_non_pixel *data = &timing->data.other_data;
1106 if (data->type == EDID_DETAIL_EST_TIMINGS)
1107 closure->modes += drm_est3_modes(closure->connector, timing);
1111 * add_established_modes - get est. modes from EDID and add them
1112 * @edid: EDID block to scan
1114 * Each EDID block contains a bitmap of the supported "established modes" list
1115 * (defined above). Tease them out and add them to the global modes list.
1118 add_established_modes(struct drm_connector *connector, struct edid *edid)
1120 struct drm_device *dev = connector->dev;
1121 unsigned long est_bits = edid->established_timings.t1 |
1122 (edid->established_timings.t2 << 8) |
1123 ((edid->established_timings.mfg_rsvd & 0x80) << 9);
1125 struct detailed_mode_closure closure = {
1126 connector, edid, 0, 0, 0
1129 for (i = 0; i <= EDID_EST_TIMINGS; i++) {
1130 if (est_bits & (1<<i)) {
1131 struct drm_display_mode *newmode;
1132 newmode = drm_mode_duplicate(dev, &edid_est_modes[i]);
1134 drm_mode_probed_add(connector, newmode);
1140 if (version_greater(edid, 1, 0))
1141 drm_for_each_detailed_block((u8 *)edid,
1142 do_established_modes, &closure);
1144 return modes + closure.modes;
1148 do_standard_modes(struct detailed_timing *timing, void *c)
1150 struct detailed_mode_closure *closure = c;
1151 struct detailed_non_pixel *data = &timing->data.other_data;
1152 struct drm_connector *connector = closure->connector;
1153 struct edid *edid = closure->edid;
1155 if (data->type == EDID_DETAIL_STD_MODES) {
1157 for (i = 0; i < 6; i++) {
1158 struct std_timing *std;
1159 struct drm_display_mode *newmode;
1161 std = &data->data.timings[i];
1162 newmode = drm_mode_std(connector, edid, std,
1165 drm_mode_probed_add(connector, newmode);
1173 * add_standard_modes - get std. modes from EDID and add them
1174 * @edid: EDID block to scan
1176 * Standard modes can be calculated using the appropriate standard (DMT,
1177 * GTF or CVT. Grab them from @edid and add them to the list.
1180 add_standard_modes(struct drm_connector *connector, struct edid *edid)
1183 struct detailed_mode_closure closure = {
1184 connector, edid, 0, 0, 0
1187 for (i = 0; i < EDID_STD_TIMINGS; i++) {
1188 struct drm_display_mode *newmode;
1190 newmode = drm_mode_std(connector, edid,
1191 &edid->standard_timings[i],
1194 drm_mode_probed_add(connector, newmode);
1199 if (version_greater(edid, 1, 0))
1200 drm_for_each_detailed_block((u8 *)edid, do_standard_modes,
1203 /* XXX should also look for standard codes in VTB blocks */
1205 return modes + closure.modes;
1208 static int drm_cvt_modes(struct drm_connector *connector,
1209 struct detailed_timing *timing)
1211 int i, j, modes = 0;
1212 struct drm_display_mode *newmode;
1213 struct drm_device *dev = connector->dev;
1214 struct cvt_timing *cvt;
1215 const int rates[] = { 60, 85, 75, 60, 50 };
1216 const u8 empty[3] = { 0, 0, 0 };
1218 for (i = 0; i < 4; i++) {
1219 int uninitialized_var(width), height;
1220 cvt = &(timing->data.other_data.data.cvt[i]);
1222 if (!memcmp(cvt->code, empty, 3))
1225 height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 4) + 1) * 2;
1226 switch (cvt->code[1] & 0x0c) {
1228 width = height * 4 / 3;
1231 width = height * 16 / 9;
1234 width = height * 16 / 10;
1237 width = height * 15 / 9;
1241 for (j = 1; j < 5; j++) {
1242 if (cvt->code[2] & (1 << j)) {
1243 newmode = drm_cvt_mode(dev, width, height,
1247 drm_mode_probed_add(connector, newmode);
1258 do_cvt_mode(struct detailed_timing *timing, void *c)
1260 struct detailed_mode_closure *closure = c;
1261 struct detailed_non_pixel *data = &timing->data.other_data;
1263 if (data->type == EDID_DETAIL_CVT_3BYTE)
1264 closure->modes += drm_cvt_modes(closure->connector, timing);
1268 add_cvt_modes(struct drm_connector *connector, struct edid *edid)
1270 struct detailed_mode_closure closure = {
1271 connector, edid, 0, 0, 0
1274 if (version_greater(edid, 1, 2))
1275 drm_for_each_detailed_block((u8 *)edid, do_cvt_mode, &closure);
1277 /* XXX should also look for CVT codes in VTB blocks */
1279 return closure.modes;
1283 do_detailed_mode(struct detailed_timing *timing, void *c)
1285 struct detailed_mode_closure *closure = c;
1286 struct drm_display_mode *newmode;
1288 if (timing->pixel_clock) {
1289 newmode = drm_mode_detailed(closure->connector->dev,
1290 closure->edid, timing,
1295 if (closure->preferred)
1296 newmode->type |= DRM_MODE_TYPE_PREFERRED;
1298 drm_mode_probed_add(closure->connector, newmode);
1300 closure->preferred = 0;
1305 * add_detailed_modes - Add modes from detailed timings
1306 * @connector: attached connector
1307 * @edid: EDID block to scan
1308 * @quirks: quirks to apply
1311 add_detailed_modes(struct drm_connector *connector, struct edid *edid,
1314 struct detailed_mode_closure closure = {
1322 if (closure.preferred && !version_greater(edid, 1, 3))
1324 (edid->features & DRM_EDID_FEATURE_PREFERRED_TIMING);
1326 drm_for_each_detailed_block((u8 *)edid, do_detailed_mode, &closure);
1328 return closure.modes;
1331 #define HDMI_IDENTIFIER 0x000C03
1332 #define AUDIO_BLOCK 0x01
1333 #define VIDEO_BLOCK 0x02
1334 #define VENDOR_BLOCK 0x03
1335 #define SPEAKER_BLOCK 0x04
1336 #define EDID_BASIC_AUDIO (1 << 6)
1337 #define EDID_CEA_YCRCB444 (1 << 5)
1338 #define EDID_CEA_YCRCB422 (1 << 4)
1341 * Search EDID for CEA extension block.
1343 u8 *drm_find_cea_extension(struct edid *edid)
1345 u8 *edid_ext = NULL;
1348 /* No EDID or EDID extensions */
1349 if (edid == NULL || edid->extensions == 0)
1352 /* Find CEA extension */
1353 for (i = 0; i < edid->extensions; i++) {
1354 edid_ext = (u8 *)edid + EDID_LENGTH * (i + 1);
1355 if (edid_ext[0] == CEA_EXT)
1359 if (i == edid->extensions)
1364 EXPORT_SYMBOL(drm_find_cea_extension);
1367 do_cea_modes (struct drm_connector *connector, u8 *db, u8 len)
1369 struct drm_device *dev = connector->dev;
1370 u8 * mode, cea_mode;
1373 for (mode = db; mode < db + len; mode++) {
1374 cea_mode = (*mode & 127) - 1; /* CEA modes are numbered 1..127 */
1375 if (cea_mode < drm_num_cea_modes) {
1376 struct drm_display_mode *newmode;
1377 newmode = drm_mode_duplicate(dev,
1378 &edid_cea_modes[cea_mode]);
1380 drm_mode_probed_add(connector, newmode);
1390 add_cea_modes(struct drm_connector *connector, struct edid *edid)
1392 u8 * cea = drm_find_cea_extension(edid);
1396 if (cea && cea[1] >= 3) {
1397 for (db = cea + 4; db < cea + cea[2]; db += dbl + 1) {
1399 if (((db[0] & 0xe0) >> 5) == VIDEO_BLOCK)
1400 modes += do_cea_modes (connector, db+1, dbl);
1408 parse_hdmi_vsdb(struct drm_connector *connector, uint8_t *db)
1410 connector->eld[5] |= (db[6] >> 7) << 1; /* Supports_AI */
1412 connector->dvi_dual = db[6] & 1;
1413 connector->max_tmds_clock = db[7] * 5;
1415 connector->latency_present[0] = db[8] >> 7;
1416 connector->latency_present[1] = (db[8] >> 6) & 1;
1417 connector->video_latency[0] = db[9];
1418 connector->audio_latency[0] = db[10];
1419 connector->video_latency[1] = db[11];
1420 connector->audio_latency[1] = db[12];
1422 DRM_LOG_KMS("HDMI: DVI dual %d, "
1423 "max TMDS clock %d, "
1424 "latency present %d %d, "
1425 "video latency %d %d, "
1426 "audio latency %d %d\n",
1427 connector->dvi_dual,
1428 connector->max_tmds_clock,
1429 (int) connector->latency_present[0],
1430 (int) connector->latency_present[1],
1431 connector->video_latency[0],
1432 connector->video_latency[1],
1433 connector->audio_latency[0],
1434 connector->audio_latency[1]);
1438 monitor_name(struct detailed_timing *t, void *data)
1440 if (t->data.other_data.type == EDID_DETAIL_MONITOR_NAME)
1441 *(u8 **)data = t->data.other_data.data.str.str;
1445 * drm_edid_to_eld - build ELD from EDID
1446 * @connector: connector corresponding to the HDMI/DP sink
1447 * @edid: EDID to parse
1449 * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver.
1450 * Some ELD fields are left to the graphics driver caller:
1455 void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
1457 uint8_t *eld = connector->eld;
1465 memset(eld, 0, sizeof(connector->eld));
1467 cea = drm_find_cea_extension(edid);
1469 DRM_DEBUG_KMS("ELD: no CEA Extension found\n");
1474 drm_for_each_detailed_block((u8 *)edid, monitor_name, &name);
1475 for (mnl = 0; name && mnl < 13; mnl++) {
1476 if (name[mnl] == 0x0a)
1478 eld[20 + mnl] = name[mnl];
1480 eld[4] = (cea[1] << 5) | mnl;
1481 DRM_DEBUG_KMS("ELD monitor %s\n", eld + 20);
1483 eld[0] = 2 << 3; /* ELD version: 2 */
1485 eld[16] = edid->mfg_id[0];
1486 eld[17] = edid->mfg_id[1];
1487 eld[18] = edid->prod_code[0];
1488 eld[19] = edid->prod_code[1];
1491 for (db = cea + 4; db < cea + cea[2]; db += dbl + 1) {
1494 switch ((db[0] & 0xe0) >> 5) {
1496 /* Audio Data Block, contains SADs */
1497 sad_count = dbl / 3;
1498 memcpy(eld + 20 + mnl, &db[1], dbl);
1501 /* Speaker Allocation Data Block */
1505 /* HDMI Vendor-Specific Data Block */
1506 if (db[1] == 0x03 && db[2] == 0x0c && db[3] == 0)
1507 parse_hdmi_vsdb(connector, db);
1513 eld[5] |= sad_count << 4;
1514 eld[2] = (20 + mnl + sad_count * 3 + 3) / 4;
1516 DRM_DEBUG_KMS("ELD size %d, SAD count %d\n", (int)eld[2], sad_count);
1518 EXPORT_SYMBOL(drm_edid_to_eld);
1521 * drm_av_sync_delay - HDMI/DP sink audio-video sync delay in millisecond
1522 * @connector: connector associated with the HDMI/DP sink
1523 * @mode: the display mode
1525 int drm_av_sync_delay(struct drm_connector *connector,
1526 struct drm_display_mode *mode)
1528 int i = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
1531 if (!connector->latency_present[0])
1533 if (!connector->latency_present[1])
1536 a = connector->audio_latency[i];
1537 v = connector->video_latency[i];
1540 * HDMI/DP sink doesn't support audio or video?
1542 if (a == 255 || v == 255)
1546 * Convert raw EDID values to millisecond.
1547 * Treat unknown latency as 0ms.
1550 a = min(2 * (a - 1), 500);
1552 v = min(2 * (v - 1), 500);
1554 return max(v - a, 0);
1556 EXPORT_SYMBOL(drm_av_sync_delay);
1559 * drm_select_eld - select one ELD from multiple HDMI/DP sinks
1560 * @encoder: the encoder just changed display mode
1561 * @mode: the adjusted display mode
1563 * It's possible for one encoder to be associated with multiple HDMI/DP sinks.
1564 * The policy is now hard coded to simply use the first HDMI/DP sink's ELD.
1566 struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
1567 struct drm_display_mode *mode)
1569 struct drm_connector *connector;
1570 struct drm_device *dev = encoder->dev;
1572 list_for_each_entry(connector, &dev->mode_config.connector_list, head)
1573 if (connector->encoder == encoder && connector->eld[0])
1578 EXPORT_SYMBOL(drm_select_eld);
1581 * drm_detect_hdmi_monitor - detect whether monitor is hdmi.
1582 * @edid: monitor EDID information
1584 * Parse the CEA extension according to CEA-861-B.
1585 * Return true if HDMI, false if not or unknown.
1587 bool drm_detect_hdmi_monitor(struct edid *edid)
1591 int start_offset, end_offset;
1592 bool is_hdmi = false;
1594 edid_ext = drm_find_cea_extension(edid);
1598 /* Data block offset in CEA extension block */
1600 end_offset = edid_ext[2];
1603 * Because HDMI identifier is in Vendor Specific Block,
1604 * search it from all data blocks of CEA extension.
1606 for (i = start_offset; i < end_offset;
1607 /* Increased by data block len */
1608 i += ((edid_ext[i] & 0x1f) + 1)) {
1609 /* Find vendor specific block */
1610 if ((edid_ext[i] >> 5) == VENDOR_BLOCK) {
1611 hdmi_id = edid_ext[i + 1] | (edid_ext[i + 2] << 8) |
1612 edid_ext[i + 3] << 16;
1613 /* Find HDMI identifier */
1614 if (hdmi_id == HDMI_IDENTIFIER)
1623 EXPORT_SYMBOL(drm_detect_hdmi_monitor);
1626 * drm_detect_monitor_audio - check monitor audio capability
1628 * Monitor should have CEA extension block.
1629 * If monitor has 'basic audio', but no CEA audio blocks, it's 'basic
1630 * audio' only. If there is any audio extension block and supported
1631 * audio format, assume at least 'basic audio' support, even if 'basic
1632 * audio' is not defined in EDID.
1635 bool drm_detect_monitor_audio(struct edid *edid)
1639 bool has_audio = false;
1640 int start_offset, end_offset;
1642 edid_ext = drm_find_cea_extension(edid);
1646 has_audio = ((edid_ext[3] & EDID_BASIC_AUDIO) != 0);
1649 DRM_DEBUG_KMS("Monitor has basic audio support\n");
1653 /* Data block offset in CEA extension block */
1655 end_offset = edid_ext[2];
1657 for (i = start_offset; i < end_offset;
1658 i += ((edid_ext[i] & 0x1f) + 1)) {
1659 if ((edid_ext[i] >> 5) == AUDIO_BLOCK) {
1661 for (j = 1; j < (edid_ext[i] & 0x1f); j += 3)
1662 DRM_DEBUG_KMS("CEA audio format %d\n",
1663 (edid_ext[i + j] >> 3) & 0xf);
1670 EXPORT_SYMBOL(drm_detect_monitor_audio);
1673 * drm_add_display_info - pull display info out if present
1675 * @info: display info (attached to connector)
1677 * Grab any available display info and stuff it into the drm_display_info
1678 * structure that's part of the connector. Useful for tracking bpp and
1681 static void drm_add_display_info(struct edid *edid,
1682 struct drm_display_info *info)
1686 info->width_mm = edid->width_cm * 10;
1687 info->height_mm = edid->height_cm * 10;
1689 /* driver figures it out in this case */
1691 info->color_formats = 0;
1693 if (edid->revision < 3)
1696 if (!(edid->input & DRM_EDID_INPUT_DIGITAL))
1699 /* Get data from CEA blocks if present */
1700 edid_ext = drm_find_cea_extension(edid);
1702 info->cea_rev = edid_ext[1];
1704 /* The existence of a CEA block should imply RGB support */
1705 info->color_formats = DRM_COLOR_FORMAT_RGB444;
1706 if (edid_ext[3] & EDID_CEA_YCRCB444)
1707 info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
1708 if (edid_ext[3] & EDID_CEA_YCRCB422)
1709 info->color_formats |= DRM_COLOR_FORMAT_YCRCB422;
1712 /* Only defined for 1.4 with digital displays */
1713 if (edid->revision < 4)
1716 switch (edid->input & DRM_EDID_DIGITAL_DEPTH_MASK) {
1717 case DRM_EDID_DIGITAL_DEPTH_6:
1720 case DRM_EDID_DIGITAL_DEPTH_8:
1723 case DRM_EDID_DIGITAL_DEPTH_10:
1726 case DRM_EDID_DIGITAL_DEPTH_12:
1729 case DRM_EDID_DIGITAL_DEPTH_14:
1732 case DRM_EDID_DIGITAL_DEPTH_16:
1735 case DRM_EDID_DIGITAL_DEPTH_UNDEF:
1741 info->color_formats |= DRM_COLOR_FORMAT_RGB444;
1742 if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB444)
1743 info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
1744 if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422)
1745 info->color_formats |= DRM_COLOR_FORMAT_YCRCB422;
1749 * drm_add_edid_modes - add modes from EDID data, if available
1750 * @connector: connector we're probing
1753 * Add the specified modes to the connector's mode list.
1755 * Return number of modes added or 0 if we couldn't find any.
1757 int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
1765 if (!drm_edid_is_valid(edid)) {
1766 dev_warn(connector->dev->dev, "%s: EDID invalid.\n",
1767 drm_get_connector_name(connector));
1771 quirks = edid_get_quirks(edid);
1774 * EDID spec says modes should be preferred in this order:
1775 * - preferred detailed mode
1776 * - other detailed modes from base block
1777 * - detailed modes from extension blocks
1778 * - CVT 3-byte code modes
1779 * - standard timing codes
1780 * - established timing codes
1781 * - modes inferred from GTF or CVT range information
1783 * We get this pretty much right.
1785 * XXX order for additional mode types in extension blocks?
1787 num_modes += add_detailed_modes(connector, edid, quirks);
1788 num_modes += add_cvt_modes(connector, edid);
1789 num_modes += add_standard_modes(connector, edid);
1790 num_modes += add_established_modes(connector, edid);
1791 num_modes += add_inferred_modes(connector, edid);
1792 num_modes += add_cea_modes(connector, edid);
1794 if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
1795 edid_fixup_preferred(connector, quirks);
1797 drm_add_display_info(edid, &connector->display_info);
1801 EXPORT_SYMBOL(drm_add_edid_modes);
1804 * drm_add_modes_noedid - add modes for the connectors without EDID
1805 * @connector: connector we're probing
1806 * @hdisplay: the horizontal display limit
1807 * @vdisplay: the vertical display limit
1809 * Add the specified modes to the connector's mode list. Only when the
1810 * hdisplay/vdisplay is not beyond the given limit, it will be added.
1812 * Return number of modes added or 0 if we couldn't find any.
1814 int drm_add_modes_noedid(struct drm_connector *connector,
1815 int hdisplay, int vdisplay)
1817 int i, count, num_modes = 0;
1818 struct drm_display_mode *mode;
1819 struct drm_device *dev = connector->dev;
1821 count = sizeof(drm_dmt_modes) / sizeof(struct drm_display_mode);
1827 for (i = 0; i < count; i++) {
1828 const struct drm_display_mode *ptr = &drm_dmt_modes[i];
1829 if (hdisplay && vdisplay) {
1831 * Only when two are valid, they will be used to check
1832 * whether the mode should be added to the mode list of
1835 if (ptr->hdisplay > hdisplay ||
1836 ptr->vdisplay > vdisplay)
1839 if (drm_mode_vrefresh(ptr) > 61)
1841 mode = drm_mode_duplicate(dev, ptr);
1843 drm_mode_probed_add(connector, mode);
1849 EXPORT_SYMBOL(drm_add_modes_noedid);