2 * Copyright © 2006-2011 Intel Corporation
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, write to the Free Software Foundation, Inc.,
15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18 * Eric Anholt <eric@anholt.net>
21 #include <linux/i2c.h>
24 #include <drm/drm_plane_helper.h>
25 #include "framebuffer.h"
27 #include "psb_intel_drv.h"
28 #include "psb_intel_reg.h"
29 #include "gma_display.h"
32 #define INTEL_LIMIT_I9XX_SDVO_DAC 0
33 #define INTEL_LIMIT_I9XX_LVDS 1
35 static const struct gma_limit_t psb_intel_limits[] = {
36 { /* INTEL_LIMIT_I9XX_SDVO_DAC */
37 .dot = {.min = 20000, .max = 400000},
38 .vco = {.min = 1400000, .max = 2800000},
39 .n = {.min = 1, .max = 6},
40 .m = {.min = 70, .max = 120},
41 .m1 = {.min = 8, .max = 18},
42 .m2 = {.min = 3, .max = 7},
43 .p = {.min = 5, .max = 80},
44 .p1 = {.min = 1, .max = 8},
45 .p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 5},
46 .find_pll = gma_find_best_pll,
48 { /* INTEL_LIMIT_I9XX_LVDS */
49 .dot = {.min = 20000, .max = 400000},
50 .vco = {.min = 1400000, .max = 2800000},
51 .n = {.min = 1, .max = 6},
52 .m = {.min = 70, .max = 120},
53 .m1 = {.min = 8, .max = 18},
54 .m2 = {.min = 3, .max = 7},
55 .p = {.min = 7, .max = 98},
56 .p1 = {.min = 1, .max = 8},
57 /* The single-channel range is 25-112Mhz, and dual-channel
58 * is 80-224Mhz. Prefer single channel as much as possible.
60 .p2 = {.dot_limit = 112000, .p2_slow = 14, .p2_fast = 7},
61 .find_pll = gma_find_best_pll,
65 static const struct gma_limit_t *psb_intel_limit(struct drm_crtc *crtc,
68 const struct gma_limit_t *limit;
70 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
71 limit = &psb_intel_limits[INTEL_LIMIT_I9XX_LVDS];
73 limit = &psb_intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
77 static void psb_intel_clock(int refclk, struct gma_clock_t *clock)
79 clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
80 clock->p = clock->p1 * clock->p2;
81 clock->vco = refclk * clock->m / (clock->n + 2);
82 clock->dot = clock->vco / clock->p;
86 * Return the pipe currently connected to the panel fitter,
87 * or -1 if the panel fitter is not present or not in use
89 static int psb_intel_panel_fitter_pipe(struct drm_device *dev)
93 pfit_control = REG_READ(PFIT_CONTROL);
95 /* See if the panel fitter is in use */
96 if ((pfit_control & PFIT_ENABLE) == 0)
98 /* Must be on PIPE 1 for PSB */
102 static int psb_intel_crtc_mode_set(struct drm_crtc *crtc,
103 struct drm_display_mode *mode,
104 struct drm_display_mode *adjusted_mode,
106 struct drm_framebuffer *old_fb)
108 struct drm_device *dev = crtc->dev;
109 struct drm_psb_private *dev_priv = dev->dev_private;
110 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
111 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
112 int pipe = gma_crtc->pipe;
113 const struct psb_offset *map = &dev_priv->regmap[pipe];
115 struct gma_clock_t clock;
116 u32 dpll = 0, fp = 0, dspcntr, pipeconf;
117 bool ok, is_sdvo = false;
118 bool is_lvds = false, is_tv = false;
119 struct drm_mode_config *mode_config = &dev->mode_config;
120 struct drm_connector *connector;
121 const struct gma_limit_t *limit;
123 /* No scan out no play */
124 if (crtc->primary->fb == NULL) {
125 crtc_funcs->mode_set_base(crtc, x, y, old_fb);
129 list_for_each_entry(connector, &mode_config->connector_list, head) {
130 struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
132 if (!connector->encoder
133 || connector->encoder->crtc != crtc)
136 switch (gma_encoder->type) {
137 case INTEL_OUTPUT_LVDS:
140 case INTEL_OUTPUT_SDVO:
143 case INTEL_OUTPUT_TVOUT:
151 limit = gma_crtc->clock_funcs->limit(crtc, refclk);
153 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk,
156 DRM_ERROR("Couldn't find PLL settings for mode! target: %d, actual: %d",
157 adjusted_mode->clock, clock.dot);
161 fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
163 dpll = DPLL_VGA_MODE_DIS;
165 dpll |= DPLLB_MODE_LVDS;
166 dpll |= DPLL_DVO_HIGH_SPEED;
168 dpll |= DPLLB_MODE_DAC_SERIAL;
170 int sdvo_pixel_multiply =
171 adjusted_mode->clock / mode->clock;
172 dpll |= DPLL_DVO_HIGH_SPEED;
174 (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
177 /* compute bitmask from p1 value */
178 dpll |= (1 << (clock.p1 - 1)) << 16;
181 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
184 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
187 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
190 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
195 /* XXX: just matching BIOS for now */
196 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
199 dpll |= PLL_REF_INPUT_DREFCLK;
202 pipeconf = REG_READ(map->conf);
204 /* Set up the display plane register */
205 dspcntr = DISPPLANE_GAMMA_ENABLE;
208 dspcntr |= DISPPLANE_SEL_PIPE_A;
210 dspcntr |= DISPPLANE_SEL_PIPE_B;
212 dspcntr |= DISPLAY_PLANE_ENABLE;
213 pipeconf |= PIPEACONF_ENABLE;
214 dpll |= DPLL_VCO_ENABLE;
217 /* Disable the panel fitter if it was on our pipe */
218 if (psb_intel_panel_fitter_pipe(dev) == pipe)
219 REG_WRITE(PFIT_CONTROL, 0);
221 drm_mode_debug_printmodeline(mode);
223 if (dpll & DPLL_VCO_ENABLE) {
224 REG_WRITE(map->fp0, fp);
225 REG_WRITE(map->dpll, dpll & ~DPLL_VCO_ENABLE);
230 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
231 * This is an exception to the general rule that mode_set doesn't turn
235 u32 lvds = REG_READ(LVDS);
237 lvds &= ~LVDS_PIPEB_SELECT;
239 lvds |= LVDS_PIPEB_SELECT;
241 lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
242 /* Set the B0-B3 data pairs corresponding to
243 * whether we're going to
244 * set the DPLLs for dual-channel mode or not.
246 lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
248 lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
250 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
251 * appropriately here, but we need to look more
252 * thoroughly into how panels behave in the two modes.
255 REG_WRITE(LVDS, lvds);
259 REG_WRITE(map->fp0, fp);
260 REG_WRITE(map->dpll, dpll);
262 /* Wait for the clocks to stabilize. */
265 /* write it again -- the BIOS does, after all */
266 REG_WRITE(map->dpll, dpll);
269 /* Wait for the clocks to stabilize. */
272 REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
273 ((adjusted_mode->crtc_htotal - 1) << 16));
274 REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
275 ((adjusted_mode->crtc_hblank_end - 1) << 16));
276 REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
277 ((adjusted_mode->crtc_hsync_end - 1) << 16));
278 REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
279 ((adjusted_mode->crtc_vtotal - 1) << 16));
280 REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
281 ((adjusted_mode->crtc_vblank_end - 1) << 16));
282 REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
283 ((adjusted_mode->crtc_vsync_end - 1) << 16));
284 /* pipesrc and dspsize control the size that is scaled from,
285 * which should always be the user's requested size.
288 ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
289 REG_WRITE(map->pos, 0);
291 ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
292 REG_WRITE(map->conf, pipeconf);
295 gma_wait_for_vblank(dev);
297 REG_WRITE(map->cntr, dspcntr);
299 /* Flush the plane changes */
300 crtc_funcs->mode_set_base(crtc, x, y, old_fb);
302 gma_wait_for_vblank(dev);
307 /* Returns the clock of the currently programmed mode of the given pipe. */
308 static int psb_intel_crtc_clock_get(struct drm_device *dev,
309 struct drm_crtc *crtc)
311 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
312 struct drm_psb_private *dev_priv = dev->dev_private;
313 int pipe = gma_crtc->pipe;
314 const struct psb_offset *map = &dev_priv->regmap[pipe];
317 struct gma_clock_t clock;
319 struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
321 if (gma_power_begin(dev, false)) {
322 dpll = REG_READ(map->dpll);
323 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
324 fp = REG_READ(map->fp0);
326 fp = REG_READ(map->fp1);
327 is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
332 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
337 is_lvds = (pipe == 1) && (dev_priv->regs.psb.saveLVDS &
341 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
342 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
343 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
348 DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
349 DPLL_FPA01_P1_POST_DIV_SHIFT);
352 if ((dpll & PLL_REF_INPUT_MASK) ==
353 PLLB_REF_INPUT_SPREADSPECTRUMIN) {
354 /* XXX: might not be 66MHz */
355 psb_intel_clock(66000, &clock);
357 psb_intel_clock(48000, &clock);
359 if (dpll & PLL_P1_DIVIDE_BY_TWO)
364 DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
365 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
367 if (dpll & PLL_P2_DIVIDE_BY_4)
372 psb_intel_clock(48000, &clock);
375 /* XXX: It would be nice to validate the clocks, but we can't reuse
376 * i830PllIsValid() because it relies on the xf86_config connector
377 * configuration being accurate, which it isn't necessarily.
383 /** Returns the currently programmed mode of the given pipe. */
384 struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev,
385 struct drm_crtc *crtc)
387 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
388 int pipe = gma_crtc->pipe;
389 struct drm_display_mode *mode;
394 struct drm_psb_private *dev_priv = dev->dev_private;
395 struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
396 const struct psb_offset *map = &dev_priv->regmap[pipe];
398 if (gma_power_begin(dev, false)) {
399 htot = REG_READ(map->htotal);
400 hsync = REG_READ(map->hsync);
401 vtot = REG_READ(map->vtotal);
402 vsync = REG_READ(map->vsync);
411 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
415 mode->clock = psb_intel_crtc_clock_get(dev, crtc);
416 mode->hdisplay = (htot & 0xffff) + 1;
417 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
418 mode->hsync_start = (hsync & 0xffff) + 1;
419 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
420 mode->vdisplay = (vtot & 0xffff) + 1;
421 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
422 mode->vsync_start = (vsync & 0xffff) + 1;
423 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
425 drm_mode_set_name(mode);
426 drm_mode_set_crtcinfo(mode, 0);
431 const struct drm_crtc_helper_funcs psb_intel_helper_funcs = {
432 .dpms = gma_crtc_dpms,
433 .mode_set = psb_intel_crtc_mode_set,
434 .mode_set_base = gma_pipe_set_base,
435 .prepare = gma_crtc_prepare,
436 .commit = gma_crtc_commit,
437 .disable = gma_crtc_disable,
440 const struct drm_crtc_funcs psb_intel_crtc_funcs = {
441 .cursor_set = gma_crtc_cursor_set,
442 .cursor_move = gma_crtc_cursor_move,
443 .gamma_set = gma_crtc_gamma_set,
444 .set_config = gma_crtc_set_config,
445 .destroy = gma_crtc_destroy,
448 const struct gma_clock_funcs psb_clock_funcs = {
449 .clock = psb_intel_clock,
450 .limit = psb_intel_limit,
451 .pll_is_valid = gma_pll_is_valid,
455 * Set the default value of cursor control and base register
456 * to zero. This is a workaround for h/w defect on Oaktrail
458 static void psb_intel_cursor_init(struct drm_device *dev,
459 struct gma_crtc *gma_crtc)
461 struct drm_psb_private *dev_priv = dev->dev_private;
462 u32 control[3] = { CURACNTR, CURBCNTR, CURCCNTR };
463 u32 base[3] = { CURABASE, CURBBASE, CURCBASE };
464 struct gtt_range *cursor_gt;
466 if (dev_priv->ops->cursor_needs_phys) {
467 /* Allocate 4 pages of stolen mem for a hardware cursor. That
468 * is enough for the 64 x 64 ARGB cursors we support.
470 cursor_gt = psb_gtt_alloc_range(dev, 4 * PAGE_SIZE, "cursor", 1,
473 gma_crtc->cursor_gt = NULL;
476 gma_crtc->cursor_gt = cursor_gt;
477 gma_crtc->cursor_addr = dev_priv->stolen_base +
480 gma_crtc->cursor_gt = NULL;
484 REG_WRITE(control[gma_crtc->pipe], 0);
485 REG_WRITE(base[gma_crtc->pipe], 0);
488 void psb_intel_crtc_init(struct drm_device *dev, int pipe,
489 struct psb_intel_mode_device *mode_dev)
491 struct drm_psb_private *dev_priv = dev->dev_private;
492 struct gma_crtc *gma_crtc;
494 uint16_t *r_base, *g_base, *b_base;
496 /* We allocate a extra array of drm_connector pointers
497 * for fbdev after the crtc */
498 gma_crtc = kzalloc(sizeof(struct gma_crtc) +
499 (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)),
501 if (gma_crtc == NULL)
504 gma_crtc->crtc_state =
505 kzalloc(sizeof(struct psb_intel_crtc_state), GFP_KERNEL);
506 if (!gma_crtc->crtc_state) {
507 dev_err(dev->dev, "Crtc state error: No memory\n");
512 /* Set the CRTC operations from the chip specific data */
513 drm_crtc_init(dev, &gma_crtc->base, dev_priv->ops->crtc_funcs);
515 /* Set the CRTC clock functions from chip specific data */
516 gma_crtc->clock_funcs = dev_priv->ops->clock_funcs;
518 drm_mode_crtc_set_gamma_size(&gma_crtc->base, 256);
519 gma_crtc->pipe = pipe;
520 gma_crtc->plane = pipe;
522 r_base = gma_crtc->base.gamma_store;
523 g_base = r_base + 256;
524 b_base = g_base + 256;
525 for (i = 0; i < 256; i++) {
526 gma_crtc->lut_r[i] = i;
527 gma_crtc->lut_g[i] = i;
528 gma_crtc->lut_b[i] = i;
533 gma_crtc->lut_adj[i] = 0;
536 gma_crtc->mode_dev = mode_dev;
537 gma_crtc->cursor_addr = 0;
539 drm_crtc_helper_add(&gma_crtc->base,
540 dev_priv->ops->crtc_helper);
542 /* Setup the array of drm_connector pointer array */
543 gma_crtc->mode_set.crtc = &gma_crtc->base;
544 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
545 dev_priv->plane_to_crtc_mapping[gma_crtc->plane] != NULL);
546 dev_priv->plane_to_crtc_mapping[gma_crtc->plane] = &gma_crtc->base;
547 dev_priv->pipe_to_crtc_mapping[gma_crtc->pipe] = &gma_crtc->base;
548 gma_crtc->mode_set.connectors = (struct drm_connector **)(gma_crtc + 1);
549 gma_crtc->mode_set.num_connectors = 0;
550 psb_intel_cursor_init(dev, gma_crtc);
552 /* Set to true so that the pipe is forced off on initial config. */
553 gma_crtc->active = true;
556 struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
558 struct drm_crtc *crtc = NULL;
560 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
561 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
562 if (gma_crtc->pipe == pipe)
568 int gma_connector_clones(struct drm_device *dev, int type_mask)
571 struct drm_connector *connector;
574 list_for_each_entry(connector, &dev->mode_config.connector_list,
576 struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
577 if (type_mask & (1 << gma_encoder->type))
578 index_mask |= (1 << entry);