1 /* i915_dma.c -- DMA support for the I915 -*- linux-c -*-
4 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
7 * Permission is hereby granted, free of charge, to any person obtaining a
8 * copy of this software and associated documentation files (the
9 * "Software"), to deal in the Software without restriction, including
10 * without limitation the rights to use, copy, modify, merge, publish,
11 * distribute, sub license, and/or sell copies of the Software, and to
12 * permit persons to whom the Software is furnished to do so, subject to
13 * the following conditions:
15 * The above copyright notice and this permission notice (including the
16 * next paragraph) shall be included in all copies or substantial portions
19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
20 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
21 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
22 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
23 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
24 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
25 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
29 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
32 #include <drm/drm_crtc_helper.h>
33 #include <drm/drm_fb_helper.h>
34 #include <drm/drm_legacy.h>
35 #include "intel_drv.h"
36 #include <drm/i915_drm.h>
38 #include "i915_vgpu.h"
39 #include "i915_trace.h"
40 #include <linux/pci.h>
41 #include <linux/console.h>
43 #include <linux/vgaarb.h>
44 #include <linux/acpi.h>
45 #include <linux/pnp.h>
46 #include <linux/vga_switcheroo.h>
47 #include <linux/slab.h>
48 #include <acpi/video.h>
50 #include <linux/pm_runtime.h>
51 #include <linux/oom.h>
54 static int i915_getparam(struct drm_device *dev, void *data,
55 struct drm_file *file_priv)
57 struct drm_i915_private *dev_priv = dev->dev_private;
58 drm_i915_getparam_t *param = data;
61 switch (param->param) {
62 case I915_PARAM_IRQ_ACTIVE:
63 case I915_PARAM_ALLOW_BATCHBUFFER:
64 case I915_PARAM_LAST_DISPATCH:
65 /* Reject all old ums/dri params. */
67 case I915_PARAM_CHIPSET_ID:
68 value = dev->pdev->device;
70 case I915_PARAM_REVISION:
71 value = dev->pdev->revision;
73 case I915_PARAM_HAS_GEM:
76 case I915_PARAM_NUM_FENCES_AVAIL:
77 value = dev_priv->num_fence_regs;
79 case I915_PARAM_HAS_OVERLAY:
80 value = dev_priv->overlay ? 1 : 0;
82 case I915_PARAM_HAS_PAGEFLIPPING:
85 case I915_PARAM_HAS_EXECBUF2:
89 case I915_PARAM_HAS_BSD:
90 value = intel_ring_initialized(&dev_priv->engine[VCS]);
92 case I915_PARAM_HAS_BLT:
93 value = intel_ring_initialized(&dev_priv->engine[BCS]);
95 case I915_PARAM_HAS_VEBOX:
96 value = intel_ring_initialized(&dev_priv->engine[VECS]);
98 case I915_PARAM_HAS_BSD2:
99 value = intel_ring_initialized(&dev_priv->engine[VCS2]);
101 case I915_PARAM_HAS_RELAXED_FENCING:
104 case I915_PARAM_HAS_COHERENT_RINGS:
107 case I915_PARAM_HAS_EXEC_CONSTANTS:
108 value = INTEL_INFO(dev)->gen >= 4;
110 case I915_PARAM_HAS_RELAXED_DELTA:
113 case I915_PARAM_HAS_GEN7_SOL_RESET:
116 case I915_PARAM_HAS_LLC:
117 value = HAS_LLC(dev);
119 case I915_PARAM_HAS_WT:
122 case I915_PARAM_HAS_ALIASING_PPGTT:
123 value = USES_PPGTT(dev);
125 case I915_PARAM_HAS_WAIT_TIMEOUT:
128 case I915_PARAM_HAS_SEMAPHORES:
129 value = i915_semaphore_is_enabled(dev);
131 case I915_PARAM_HAS_PRIME_VMAP_FLUSH:
134 case I915_PARAM_HAS_SECURE_BATCHES:
135 value = capable(CAP_SYS_ADMIN);
137 case I915_PARAM_HAS_PINNED_BATCHES:
140 case I915_PARAM_HAS_EXEC_NO_RELOC:
143 case I915_PARAM_HAS_EXEC_HANDLE_LUT:
146 case I915_PARAM_CMD_PARSER_VERSION:
147 value = i915_cmd_parser_get_version();
149 case I915_PARAM_HAS_COHERENT_PHYS_GTT:
152 case I915_PARAM_MMAP_VERSION:
155 case I915_PARAM_SUBSLICE_TOTAL:
156 value = INTEL_INFO(dev)->subslice_total;
160 case I915_PARAM_EU_TOTAL:
161 value = INTEL_INFO(dev)->eu_total;
165 case I915_PARAM_HAS_GPU_RESET:
166 value = i915.enable_hangcheck &&
167 intel_has_gpu_reset(dev);
169 case I915_PARAM_HAS_RESOURCE_STREAMER:
170 value = HAS_RESOURCE_STREAMER(dev);
172 case I915_PARAM_HAS_EXEC_SOFTPIN:
176 DRM_DEBUG("Unknown parameter %d\n", param->param);
180 if (copy_to_user(param->value, &value, sizeof(int))) {
181 DRM_ERROR("copy_to_user failed\n");
188 static int i915_get_bridge_dev(struct drm_device *dev)
190 struct drm_i915_private *dev_priv = dev->dev_private;
192 dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
193 if (!dev_priv->bridge_dev) {
194 DRM_ERROR("bridge device not found\n");
200 #define MCHBAR_I915 0x44
201 #define MCHBAR_I965 0x48
202 #define MCHBAR_SIZE (4*4096)
204 #define DEVEN_REG 0x54
205 #define DEVEN_MCHBAR_EN (1 << 28)
207 /* Allocate space for the MCH regs if needed, return nonzero on error */
209 intel_alloc_mchbar_resource(struct drm_device *dev)
211 struct drm_i915_private *dev_priv = dev->dev_private;
212 int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
213 u32 temp_lo, temp_hi = 0;
217 if (INTEL_INFO(dev)->gen >= 4)
218 pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
219 pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
220 mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
222 /* If ACPI doesn't have it, assume we need to allocate it ourselves */
225 pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
229 /* Get some space for it */
230 dev_priv->mch_res.name = "i915 MCHBAR";
231 dev_priv->mch_res.flags = IORESOURCE_MEM;
232 ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
234 MCHBAR_SIZE, MCHBAR_SIZE,
236 0, pcibios_align_resource,
237 dev_priv->bridge_dev);
239 DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
240 dev_priv->mch_res.start = 0;
244 if (INTEL_INFO(dev)->gen >= 4)
245 pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
246 upper_32_bits(dev_priv->mch_res.start));
248 pci_write_config_dword(dev_priv->bridge_dev, reg,
249 lower_32_bits(dev_priv->mch_res.start));
253 /* Setup MCHBAR if possible, return true if we should disable it again */
255 intel_setup_mchbar(struct drm_device *dev)
257 struct drm_i915_private *dev_priv = dev->dev_private;
258 int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
262 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
265 dev_priv->mchbar_need_disable = false;
267 if (IS_I915G(dev) || IS_I915GM(dev)) {
268 pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
269 enabled = !!(temp & DEVEN_MCHBAR_EN);
271 pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
275 /* If it's already enabled, don't have to do anything */
279 if (intel_alloc_mchbar_resource(dev))
282 dev_priv->mchbar_need_disable = true;
284 /* Space is allocated or reserved, so enable it. */
285 if (IS_I915G(dev) || IS_I915GM(dev)) {
286 pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG,
287 temp | DEVEN_MCHBAR_EN);
289 pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
290 pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
295 intel_teardown_mchbar(struct drm_device *dev)
297 struct drm_i915_private *dev_priv = dev->dev_private;
298 int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
301 if (dev_priv->mchbar_need_disable) {
302 if (IS_I915G(dev) || IS_I915GM(dev)) {
303 pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
304 temp &= ~DEVEN_MCHBAR_EN;
305 pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp);
307 pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
309 pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp);
313 if (dev_priv->mch_res.start)
314 release_resource(&dev_priv->mch_res);
317 /* true = enable decode, false = disable decoder */
318 static unsigned int i915_vga_set_decode(void *cookie, bool state)
320 struct drm_device *dev = cookie;
322 intel_modeset_vga_set_state(dev, state);
324 return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
325 VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
327 return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
330 static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
332 struct drm_device *dev = pci_get_drvdata(pdev);
333 pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
335 if (state == VGA_SWITCHEROO_ON) {
336 pr_info("switched on\n");
337 dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
338 /* i915 resume handler doesn't set to D0 */
339 pci_set_power_state(dev->pdev, PCI_D0);
340 i915_resume_switcheroo(dev);
341 dev->switch_power_state = DRM_SWITCH_POWER_ON;
343 pr_info("switched off\n");
344 dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
345 i915_suspend_switcheroo(dev, pmm);
346 dev->switch_power_state = DRM_SWITCH_POWER_OFF;
350 static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
352 struct drm_device *dev = pci_get_drvdata(pdev);
355 * FIXME: open_count is protected by drm_global_mutex but that would lead to
356 * locking inversion with the driver load path. And the access here is
357 * completely racy anyway. So don't bother with locking for now.
359 return dev->open_count == 0;
362 static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
363 .set_gpu_state = i915_switcheroo_set_state,
365 .can_switch = i915_switcheroo_can_switch,
368 static int i915_load_modeset_init(struct drm_device *dev)
370 struct drm_i915_private *dev_priv = dev->dev_private;
373 ret = intel_bios_init(dev_priv);
375 DRM_INFO("failed to find VBIOS tables\n");
377 /* If we have > 1 VGA cards, then we need to arbitrate access
378 * to the common VGA resources.
380 * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
381 * then we do not take part in VGA arbitration and the
382 * vga_client_register() fails with -ENODEV.
384 ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
385 if (ret && ret != -ENODEV)
388 intel_register_dsm_handler();
390 ret = vga_switcheroo_register_client(dev->pdev, &i915_switcheroo_ops, false);
392 goto cleanup_vga_client;
394 intel_power_domains_init_hw(dev_priv, false);
396 intel_csr_ucode_init(dev_priv);
398 ret = intel_irq_install(dev_priv);
402 intel_setup_gmbus(dev);
404 /* Important: The output setup functions called by modeset_init need
405 * working irqs for e.g. gmbus and dp aux transfers. */
406 intel_modeset_init(dev);
408 intel_guc_ucode_init(dev);
410 ret = i915_gem_init(dev);
414 intel_modeset_gem_init(dev);
416 /* Always safe in the mode setting case. */
417 /* FIXME: do pre/post-mode set stuff in core KMS code */
418 dev->vblank_disable_allowed = true;
419 if (INTEL_INFO(dev)->num_pipes == 0)
422 ret = intel_fbdev_init(dev);
426 /* Only enable hotplug handling once the fbdev is fully set up. */
427 intel_hpd_init(dev_priv);
430 * Some ports require correctly set-up hpd registers for detection to
431 * work properly (leading to ghost connected connector status), e.g. VGA
432 * on gm45. Hence we can only set up the initial fbdev config after hpd
433 * irqs are fully enabled. Now we should scan for the initial config
434 * only once hotplug handling is enabled, but due to screwed-up locking
435 * around kms/fbdev init we can't protect the fdbev initial config
436 * scanning against hotplug events. Hence do this first and ignore the
437 * tiny window where we will loose hotplug notifactions.
439 intel_fbdev_initial_config_async(dev);
441 drm_kms_helper_poll_init(dev);
446 mutex_lock(&dev->struct_mutex);
447 i915_gem_cleanup_ringbuffer(dev);
448 i915_gem_context_fini(dev);
449 mutex_unlock(&dev->struct_mutex);
451 intel_guc_ucode_fini(dev);
452 drm_irq_uninstall(dev);
453 intel_teardown_gmbus(dev);
455 intel_csr_ucode_fini(dev_priv);
456 vga_switcheroo_unregister_client(dev->pdev);
458 vga_client_register(dev->pdev, NULL, NULL, NULL);
463 #if IS_ENABLED(CONFIG_FB)
464 static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
466 struct apertures_struct *ap;
467 struct pci_dev *pdev = dev_priv->dev->pdev;
471 ap = alloc_apertures(1);
475 ap->ranges[0].base = dev_priv->gtt.mappable_base;
476 ap->ranges[0].size = dev_priv->gtt.mappable_end;
479 pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
481 ret = remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
488 static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
494 #if !defined(CONFIG_VGA_CONSOLE)
495 static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
499 #elif !defined(CONFIG_DUMMY_CONSOLE)
500 static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
505 static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
509 DRM_INFO("Replacing VGA console driver\n");
512 if (con_is_bound(&vga_con))
513 ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
515 ret = do_unregister_con_driver(&vga_con);
517 /* Ignore "already unregistered". */
527 static void i915_dump_device_info(struct drm_i915_private *dev_priv)
529 const struct intel_device_info *info = &dev_priv->info;
531 #define PRINT_S(name) "%s"
533 #define PRINT_FLAG(name) info->name ? #name "," : ""
535 DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
536 DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
538 dev_priv->dev->pdev->device,
539 dev_priv->dev->pdev->revision,
540 DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
547 static void cherryview_sseu_info_init(struct drm_device *dev)
549 struct drm_i915_private *dev_priv = dev->dev_private;
550 struct intel_device_info *info;
553 info = (struct intel_device_info *)&dev_priv->info;
554 fuse = I915_READ(CHV_FUSE_GT);
556 info->slice_total = 1;
558 if (!(fuse & CHV_FGT_DISABLE_SS0)) {
559 info->subslice_per_slice++;
560 eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
561 CHV_FGT_EU_DIS_SS0_R1_MASK);
562 info->eu_total += 8 - hweight32(eu_dis);
565 if (!(fuse & CHV_FGT_DISABLE_SS1)) {
566 info->subslice_per_slice++;
567 eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
568 CHV_FGT_EU_DIS_SS1_R1_MASK);
569 info->eu_total += 8 - hweight32(eu_dis);
572 info->subslice_total = info->subslice_per_slice;
574 * CHV expected to always have a uniform distribution of EU
577 info->eu_per_subslice = info->subslice_total ?
578 info->eu_total / info->subslice_total :
581 * CHV supports subslice power gating on devices with more than
582 * one subslice, and supports EU power gating on devices with
583 * more than one EU pair per subslice.
585 info->has_slice_pg = 0;
586 info->has_subslice_pg = (info->subslice_total > 1);
587 info->has_eu_pg = (info->eu_per_subslice > 2);
590 static void gen9_sseu_info_init(struct drm_device *dev)
592 struct drm_i915_private *dev_priv = dev->dev_private;
593 struct intel_device_info *info;
594 int s_max = 3, ss_max = 4, eu_max = 8;
596 u32 fuse2, s_enable, ss_disable, eu_disable;
599 info = (struct intel_device_info *)&dev_priv->info;
600 fuse2 = I915_READ(GEN8_FUSE2);
601 s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
603 ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
604 GEN9_F2_SS_DIS_SHIFT;
606 info->slice_total = hweight32(s_enable);
608 * The subslice disable field is global, i.e. it applies
609 * to each of the enabled slices.
611 info->subslice_per_slice = ss_max - hweight32(ss_disable);
612 info->subslice_total = info->slice_total *
613 info->subslice_per_slice;
616 * Iterate through enabled slices and subslices to
617 * count the total enabled EU.
619 for (s = 0; s < s_max; s++) {
620 if (!(s_enable & (0x1 << s)))
621 /* skip disabled slice */
624 eu_disable = I915_READ(GEN9_EU_DISABLE(s));
625 for (ss = 0; ss < ss_max; ss++) {
628 if (ss_disable & (0x1 << ss))
629 /* skip disabled subslice */
632 eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
636 * Record which subslice(s) has(have) 7 EUs. we
637 * can tune the hash used to spread work among
638 * subslices if they are unbalanced.
641 info->subslice_7eu[s] |= 1 << ss;
643 info->eu_total += eu_per_ss;
648 * SKL is expected to always have a uniform distribution
649 * of EU across subslices with the exception that any one
650 * EU in any one subslice may be fused off for die
651 * recovery. BXT is expected to be perfectly uniform in EU
654 info->eu_per_subslice = info->subslice_total ?
655 DIV_ROUND_UP(info->eu_total,
656 info->subslice_total) : 0;
658 * SKL supports slice power gating on devices with more than
659 * one slice, and supports EU power gating on devices with
660 * more than one EU pair per subslice. BXT supports subslice
661 * power gating on devices with more than one subslice, and
662 * supports EU power gating on devices with more than one EU
665 info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
666 (info->slice_total > 1));
667 info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
668 info->has_eu_pg = (info->eu_per_subslice > 2);
671 static void broadwell_sseu_info_init(struct drm_device *dev)
673 struct drm_i915_private *dev_priv = dev->dev_private;
674 struct intel_device_info *info;
675 const int s_max = 3, ss_max = 3, eu_max = 8;
677 u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
679 fuse2 = I915_READ(GEN8_FUSE2);
680 s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
681 ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
683 eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
684 eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
685 ((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
686 (32 - GEN8_EU_DIS0_S1_SHIFT));
687 eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
688 ((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
689 (32 - GEN8_EU_DIS1_S2_SHIFT));
692 info = (struct intel_device_info *)&dev_priv->info;
693 info->slice_total = hweight32(s_enable);
696 * The subslice disable field is global, i.e. it applies
697 * to each of the enabled slices.
699 info->subslice_per_slice = ss_max - hweight32(ss_disable);
700 info->subslice_total = info->slice_total * info->subslice_per_slice;
703 * Iterate through enabled slices and subslices to
704 * count the total enabled EU.
706 for (s = 0; s < s_max; s++) {
707 if (!(s_enable & (0x1 << s)))
708 /* skip disabled slice */
711 for (ss = 0; ss < ss_max; ss++) {
714 if (ss_disable & (0x1 << ss))
715 /* skip disabled subslice */
718 n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
721 * Record which subslices have 7 EUs.
723 if (eu_max - n_disabled == 7)
724 info->subslice_7eu[s] |= 1 << ss;
726 info->eu_total += eu_max - n_disabled;
731 * BDW is expected to always have a uniform distribution of EU across
732 * subslices with the exception that any one EU in any one subslice may
733 * be fused off for die recovery.
735 info->eu_per_subslice = info->subslice_total ?
736 DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
739 * BDW supports slice power gating on devices with more than
742 info->has_slice_pg = (info->slice_total > 1);
743 info->has_subslice_pg = 0;
748 * Determine various intel_device_info fields at runtime.
750 * Use it when either:
751 * - it's judged too laborious to fill n static structures with the limit
752 * when a simple if statement does the job,
753 * - run-time checks (eg read fuse/strap registers) are needed.
755 * This function needs to be called:
756 * - after the MMIO has been setup as we are reading registers,
757 * - after the PCH has been detected,
758 * - before the first usage of the fields it can tweak.
760 static void intel_device_info_runtime_init(struct drm_device *dev)
762 struct drm_i915_private *dev_priv = dev->dev_private;
763 struct intel_device_info *info;
766 info = (struct intel_device_info *)&dev_priv->info;
769 * Skylake and Broxton currently don't expose the topmost plane as its
770 * use is exclusive with the legacy cursor and we only want to expose
771 * one of those, not both. Until we can safely expose the topmost plane
772 * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
773 * we don't expose the topmost plane at all to prevent ABI breakage
776 if (IS_BROXTON(dev)) {
777 info->num_sprites[PIPE_A] = 2;
778 info->num_sprites[PIPE_B] = 2;
779 info->num_sprites[PIPE_C] = 1;
780 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
781 for_each_pipe(dev_priv, pipe)
782 info->num_sprites[pipe] = 2;
784 for_each_pipe(dev_priv, pipe)
785 info->num_sprites[pipe] = 1;
787 if (i915.disable_display) {
788 DRM_INFO("Display disabled (module parameter)\n");
790 } else if (info->num_pipes > 0 &&
791 (INTEL_INFO(dev)->gen == 7 || INTEL_INFO(dev)->gen == 8) &&
792 HAS_PCH_SPLIT(dev)) {
793 u32 fuse_strap = I915_READ(FUSE_STRAP);
794 u32 sfuse_strap = I915_READ(SFUSE_STRAP);
797 * SFUSE_STRAP is supposed to have a bit signalling the display
798 * is fused off. Unfortunately it seems that, at least in
799 * certain cases, fused off display means that PCH display
800 * reads don't land anywhere. In that case, we read 0s.
802 * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
803 * should be set when taking over after the firmware.
805 if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
806 sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
807 (dev_priv->pch_type == PCH_CPT &&
808 !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
809 DRM_INFO("Display fused off, disabling\n");
811 } else if (fuse_strap & IVB_PIPE_C_DISABLE) {
812 DRM_INFO("PipeC fused off\n");
813 info->num_pipes -= 1;
815 } else if (info->num_pipes > 0 && INTEL_INFO(dev)->gen == 9) {
816 u32 dfsm = I915_READ(SKL_DFSM);
817 u8 disabled_mask = 0;
821 if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
822 disabled_mask |= BIT(PIPE_A);
823 if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
824 disabled_mask |= BIT(PIPE_B);
825 if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
826 disabled_mask |= BIT(PIPE_C);
828 num_bits = hweight8(disabled_mask);
830 switch (disabled_mask) {
833 case BIT(PIPE_A) | BIT(PIPE_B):
834 case BIT(PIPE_A) | BIT(PIPE_C):
841 if (num_bits > info->num_pipes || invalid)
842 DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
845 info->num_pipes -= num_bits;
848 /* Initialize slice/subslice/EU info */
849 if (IS_CHERRYVIEW(dev))
850 cherryview_sseu_info_init(dev);
851 else if (IS_BROADWELL(dev))
852 broadwell_sseu_info_init(dev);
853 else if (INTEL_INFO(dev)->gen >= 9)
854 gen9_sseu_info_init(dev);
856 /* Snooping is broken on BXT A stepping. */
857 info->has_snoop = !info->has_llc;
858 info->has_snoop &= !IS_BXT_REVID(dev, 0, BXT_REVID_A1);
860 DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
861 DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
862 DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
863 DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
864 DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
865 DRM_DEBUG_DRIVER("has slice power gating: %s\n",
866 info->has_slice_pg ? "y" : "n");
867 DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
868 info->has_subslice_pg ? "y" : "n");
869 DRM_DEBUG_DRIVER("has EU power gating: %s\n",
870 info->has_eu_pg ? "y" : "n");
873 static void intel_init_dpio(struct drm_i915_private *dev_priv)
876 * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
877 * CHV x1 PHY (DP/HDMI D)
878 * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
880 if (IS_CHERRYVIEW(dev_priv)) {
881 DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
882 DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
883 } else if (IS_VALLEYVIEW(dev_priv)) {
884 DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
888 static int i915_workqueues_init(struct drm_i915_private *dev_priv)
891 * The i915 workqueue is primarily used for batched retirement of
892 * requests (and thus managing bo) once the task has been completed
893 * by the GPU. i915_gem_retire_requests() is called directly when we
894 * need high-priority retirement, such as waiting for an explicit
897 * It is also used for periodic low-priority events, such as
898 * idle-timers and recording error state.
900 * All tasks on the workqueue are expected to acquire the dev mutex
901 * so there is no point in running more than one instance of the
902 * workqueue at any time. Use an ordered one.
904 dev_priv->wq = alloc_ordered_workqueue("i915", 0);
905 if (dev_priv->wq == NULL)
908 dev_priv->hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0);
909 if (dev_priv->hotplug.dp_wq == NULL)
912 dev_priv->gpu_error.hangcheck_wq =
913 alloc_ordered_workqueue("i915-hangcheck", 0);
914 if (dev_priv->gpu_error.hangcheck_wq == NULL)
920 destroy_workqueue(dev_priv->hotplug.dp_wq);
922 destroy_workqueue(dev_priv->wq);
924 DRM_ERROR("Failed to allocate workqueues.\n");
929 static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv)
931 destroy_workqueue(dev_priv->gpu_error.hangcheck_wq);
932 destroy_workqueue(dev_priv->hotplug.dp_wq);
933 destroy_workqueue(dev_priv->wq);
936 static int i915_mmio_setup(struct drm_device *dev)
938 struct drm_i915_private *dev_priv = to_i915(dev);
942 mmio_bar = IS_GEN2(dev) ? 1 : 0;
944 * Before gen4, the registers and the GTT are behind different BARs.
945 * However, from gen4 onwards, the registers and the GTT are shared
946 * in the same BAR, so we want to restrict this ioremap from
947 * clobbering the GTT which we want ioremap_wc instead. Fortunately,
948 * the register BAR remains the same size for all the earlier
949 * generations up to Ironlake.
951 if (INTEL_INFO(dev)->gen < 5)
952 mmio_size = 512 * 1024;
954 mmio_size = 2 * 1024 * 1024;
955 dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, mmio_size);
956 if (dev_priv->regs == NULL) {
957 DRM_ERROR("failed to map registers\n");
962 /* Try to make sure MCHBAR is enabled before poking at it */
963 intel_setup_mchbar(dev);
968 static void i915_mmio_cleanup(struct drm_device *dev)
970 struct drm_i915_private *dev_priv = to_i915(dev);
972 intel_teardown_mchbar(dev);
973 pci_iounmap(dev->pdev, dev_priv->regs);
977 * i915_driver_load - setup chip and create an initial config
979 * @flags: startup flags
981 * The driver load routine has to do several things:
982 * - drive output discovery via intel_modeset_init()
983 * - initialize the memory manager
984 * - allocate initial config memory
985 * - setup the DRM framebuffer with the allocated memory
987 int i915_driver_load(struct drm_device *dev, unsigned long flags)
989 struct drm_i915_private *dev_priv;
990 struct intel_device_info *info, *device_info;
992 uint32_t aperture_size;
994 info = (struct intel_device_info *) flags;
996 dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
997 if (dev_priv == NULL)
1000 dev->dev_private = dev_priv;
1001 dev_priv->dev = dev;
1003 /* Setup the write-once "constant" device info */
1004 device_info = (struct intel_device_info *)&dev_priv->info;
1005 memcpy(device_info, info, sizeof(dev_priv->info));
1006 device_info->device_id = dev->pdev->device;
1008 spin_lock_init(&dev_priv->irq_lock);
1009 spin_lock_init(&dev_priv->gpu_error.lock);
1010 mutex_init(&dev_priv->backlight_lock);
1011 spin_lock_init(&dev_priv->uncore.lock);
1012 spin_lock_init(&dev_priv->mm.object_stat_lock);
1013 spin_lock_init(&dev_priv->mmio_flip_lock);
1014 mutex_init(&dev_priv->sb_lock);
1015 mutex_init(&dev_priv->modeset_restore_lock);
1016 mutex_init(&dev_priv->av_mutex);
1017 mutex_init(&dev_priv->wm.wm_mutex);
1019 ret = i915_workqueues_init(dev_priv);
1023 intel_pm_setup(dev);
1025 intel_runtime_pm_get(dev_priv);
1027 intel_display_crc_init(dev);
1029 i915_dump_device_info(dev_priv);
1031 /* Not all pre-production machines fall into this category, only the
1032 * very first ones. Almost everything should work, except for maybe
1033 * suspend/resume. And we don't implement workarounds that affect only
1034 * pre-production machines. */
1035 if (IS_HSW_EARLY_SDV(dev))
1036 DRM_INFO("This is an early pre-production Haswell machine. "
1037 "It may not be fully functional.\n");
1039 if (i915_get_bridge_dev(dev)) {
1041 goto out_runtime_pm_put;
1044 ret = i915_mmio_setup(dev);
1048 /* This must be called before any calls to HAS_PCH_* */
1049 intel_detect_pch(dev);
1051 intel_uncore_init(dev);
1053 ret = i915_gem_gtt_init(dev);
1055 goto out_uncore_fini;
1057 /* WARNING: Apparently we must kick fbdev drivers before vgacon,
1058 * otherwise the vga fbdev driver falls over. */
1059 ret = i915_kick_out_firmware_fb(dev_priv);
1061 DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
1065 ret = i915_kick_out_vgacon(dev_priv);
1067 DRM_ERROR("failed to remove conflicting VGA console\n");
1071 pci_set_master(dev->pdev);
1073 /* overlay on gen2 is broken and can't address above 1G */
1075 dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
1077 /* 965GM sometimes incorrectly writes to hardware status page (HWS)
1078 * using 32bit addressing, overwriting memory if HWS is located
1081 * The documentation also mentions an issue with undefined
1082 * behaviour if any general state is accessed within a page above 4GB,
1083 * which also needs to be handled carefully.
1085 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1086 dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
1088 aperture_size = dev_priv->gtt.mappable_end;
1090 dev_priv->gtt.mappable =
1091 io_mapping_create_wc(dev_priv->gtt.mappable_base,
1093 if (dev_priv->gtt.mappable == NULL) {
1098 dev_priv->gtt.mtrr = arch_phys_wc_add(dev_priv->gtt.mappable_base,
1101 intel_irq_init(dev_priv);
1102 intel_uncore_sanitize(dev);
1104 intel_opregion_setup(dev);
1106 i915_gem_load_init(dev);
1107 i915_gem_shrinker_init(dev_priv);
1109 /* On the 945G/GM, the chipset reports the MSI capability on the
1110 * integrated graphics even though the support isn't actually there
1111 * according to the published specs. It doesn't appear to function
1112 * correctly in testing on 945G.
1113 * This may be a side effect of MSI having been made available for PEG
1114 * and the registers being closely associated.
1116 * According to chipset errata, on the 965GM, MSI interrupts may
1117 * be lost or delayed, but we use them anyways to avoid
1118 * stuck interrupts on some machines.
1120 if (!IS_I945G(dev) && !IS_I945GM(dev)) {
1121 if (pci_enable_msi(dev->pdev) < 0)
1122 DRM_DEBUG_DRIVER("can't enable MSI");
1125 intel_device_info_runtime_init(dev);
1127 intel_init_dpio(dev_priv);
1129 if (INTEL_INFO(dev)->num_pipes) {
1130 ret = drm_vblank_init(dev, INTEL_INFO(dev)->num_pipes);
1132 goto out_gem_unload;
1135 intel_power_domains_init(dev_priv);
1137 ret = i915_load_modeset_init(dev);
1139 DRM_ERROR("failed to init modeset\n");
1140 goto out_power_well;
1144 * Notify a valid surface after modesetting,
1145 * when running inside a VM.
1147 if (intel_vgpu_active(dev))
1148 I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
1150 i915_setup_sysfs(dev);
1152 if (INTEL_INFO(dev)->num_pipes) {
1153 /* Must be done after probing outputs */
1154 intel_opregion_init(dev);
1155 acpi_video_register();
1159 intel_gpu_ips_init(dev_priv);
1161 intel_runtime_pm_enable(dev_priv);
1163 i915_audio_component_init(dev_priv);
1165 intel_runtime_pm_put(dev_priv);
1170 intel_power_domains_fini(dev_priv);
1171 drm_vblank_cleanup(dev);
1173 i915_gem_shrinker_cleanup(dev_priv);
1175 if (dev->pdev->msi_enabled)
1176 pci_disable_msi(dev->pdev);
1178 intel_teardown_mchbar(dev);
1179 pm_qos_remove_request(&dev_priv->pm_qos);
1180 arch_phys_wc_del(dev_priv->gtt.mtrr);
1181 io_mapping_free(dev_priv->gtt.mappable);
1183 i915_global_gtt_cleanup(dev);
1185 intel_uncore_fini(dev);
1186 i915_mmio_cleanup(dev);
1188 pci_dev_put(dev_priv->bridge_dev);
1189 i915_gem_load_cleanup(dev);
1191 intel_runtime_pm_put(dev_priv);
1192 i915_workqueues_cleanup(dev_priv);
1199 int i915_driver_unload(struct drm_device *dev)
1201 struct drm_i915_private *dev_priv = dev->dev_private;
1204 intel_fbdev_fini(dev);
1206 i915_audio_component_cleanup(dev_priv);
1208 ret = i915_gem_suspend(dev);
1210 DRM_ERROR("failed to idle hardware: %d\n", ret);
1214 intel_power_domains_fini(dev_priv);
1216 intel_gpu_ips_teardown();
1218 i915_teardown_sysfs(dev);
1220 i915_gem_shrinker_cleanup(dev_priv);
1222 io_mapping_free(dev_priv->gtt.mappable);
1223 arch_phys_wc_del(dev_priv->gtt.mtrr);
1225 acpi_video_unregister();
1227 drm_vblank_cleanup(dev);
1229 intel_modeset_cleanup(dev);
1232 * free the memory space allocated for the child device
1233 * config parsed from VBT
1235 if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) {
1236 kfree(dev_priv->vbt.child_dev);
1237 dev_priv->vbt.child_dev = NULL;
1238 dev_priv->vbt.child_dev_num = 0;
1240 kfree(dev_priv->vbt.sdvo_lvds_vbt_mode);
1241 dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
1242 kfree(dev_priv->vbt.lfp_lvds_vbt_mode);
1243 dev_priv->vbt.lfp_lvds_vbt_mode = NULL;
1245 vga_switcheroo_unregister_client(dev->pdev);
1246 vga_client_register(dev->pdev, NULL, NULL, NULL);
1248 intel_csr_ucode_fini(dev_priv);
1250 /* Free error state after interrupts are fully disabled. */
1251 cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
1252 i915_destroy_error_state(dev);
1254 if (dev->pdev->msi_enabled)
1255 pci_disable_msi(dev->pdev);
1257 intel_opregion_fini(dev);
1259 /* Flush any outstanding unpin_work. */
1260 flush_workqueue(dev_priv->wq);
1262 intel_guc_ucode_fini(dev);
1263 mutex_lock(&dev->struct_mutex);
1264 i915_gem_cleanup_ringbuffer(dev);
1265 i915_gem_context_fini(dev);
1266 mutex_unlock(&dev->struct_mutex);
1267 intel_fbc_cleanup_cfb(dev_priv);
1269 pm_qos_remove_request(&dev_priv->pm_qos);
1271 i915_global_gtt_cleanup(dev);
1273 intel_uncore_fini(dev);
1274 i915_mmio_cleanup(dev);
1276 i915_gem_load_cleanup(dev);
1277 pci_dev_put(dev_priv->bridge_dev);
1278 i915_workqueues_cleanup(dev_priv);
1284 int i915_driver_open(struct drm_device *dev, struct drm_file *file)
1288 ret = i915_gem_open(dev, file);
1296 * i915_driver_lastclose - clean up after all DRM clients have exited
1299 * Take care of cleaning up after all DRM clients have exited. In the
1300 * mode setting case, we want to restore the kernel's initial mode (just
1301 * in case the last client left us in a bad state).
1303 * Additionally, in the non-mode setting case, we'll tear down the GTT
1304 * and DMA structures, since the kernel won't be using them, and clea
1307 void i915_driver_lastclose(struct drm_device *dev)
1309 intel_fbdev_restore_mode(dev);
1310 vga_switcheroo_process_delayed_switch();
1313 void i915_driver_preclose(struct drm_device *dev, struct drm_file *file)
1315 mutex_lock(&dev->struct_mutex);
1316 i915_gem_context_close(dev, file);
1317 i915_gem_release(dev, file);
1318 mutex_unlock(&dev->struct_mutex);
1321 void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
1323 struct drm_i915_file_private *file_priv = file->driver_priv;
1329 i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data,
1330 struct drm_file *file)
1335 const struct drm_ioctl_desc i915_ioctls[] = {
1336 DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
1337 DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH),
1338 DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH),
1339 DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH),
1340 DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH),
1341 DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH),
1342 DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH|DRM_RENDER_ALLOW),
1343 DRM_IOCTL_DEF_DRV(I915_SETPARAM, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
1344 DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
1345 DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
1346 DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
1347 DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH),
1348 DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
1349 DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
1350 DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, drm_noop, DRM_AUTH),
1351 DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH),
1352 DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
1353 DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
1354 DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
1355 DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_RENDER_ALLOW),
1356 DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
1357 DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
1358 DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
1359 DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_RENDER_ALLOW),
1360 DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_RENDER_ALLOW),
1361 DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
1362 DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
1363 DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
1364 DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_RENDER_ALLOW),
1365 DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_RENDER_ALLOW),
1366 DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_RENDER_ALLOW),
1367 DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_RENDER_ALLOW),
1368 DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_RENDER_ALLOW),
1369 DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_RENDER_ALLOW),
1370 DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_RENDER_ALLOW),
1371 DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_RENDER_ALLOW),
1372 DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_RENDER_ALLOW),
1373 DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW),
1374 DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
1375 DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW),
1376 DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image, DRM_MASTER|DRM_CONTROL_ALLOW),
1377 DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs, DRM_MASTER|DRM_CONTROL_ALLOW),
1378 DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW),
1379 DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW),
1380 DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
1381 DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW),
1382 DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW),
1383 DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_RENDER_ALLOW),
1384 DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_get_reset_stats_ioctl, DRM_RENDER_ALLOW),
1385 DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_RENDER_ALLOW),
1386 DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_RENDER_ALLOW),
1387 DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_RENDER_ALLOW),
1390 int i915_max_ioctl = ARRAY_SIZE(i915_ioctls);