]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/gpu/drm/i915/i915_drv.c
drm/i915: Remove gen specific checks in MMIO
[karo-tx-linux.git] / drivers / gpu / drm / i915 / i915_drv.c
1 /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
2  */
3 /*
4  *
5  * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
6  * All Rights Reserved.
7  *
8  * Permission is hereby granted, free of charge, to any person obtaining a
9  * copy of this software and associated documentation files (the
10  * "Software"), to deal in the Software without restriction, including
11  * without limitation the rights to use, copy, modify, merge, publish,
12  * distribute, sub license, and/or sell copies of the Software, and to
13  * permit persons to whom the Software is furnished to do so, subject to
14  * the following conditions:
15  *
16  * The above copyright notice and this permission notice (including the
17  * next paragraph) shall be included in all copies or substantial portions
18  * of the Software.
19  *
20  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
21  * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
23  * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
24  * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25  * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26  * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
27  *
28  */
29
30 #include <linux/device.h>
31 #include <drm/drmP.h>
32 #include <drm/i915_drm.h>
33 #include "i915_drv.h"
34 #include "i915_trace.h"
35 #include "intel_drv.h"
36
37 #include <linux/console.h>
38 #include <linux/module.h>
39 #include <drm/drm_crtc_helper.h>
40
41 static int i915_modeset __read_mostly = -1;
42 module_param_named(modeset, i915_modeset, int, 0400);
43 MODULE_PARM_DESC(modeset,
44                 "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
45                 "1=on, -1=force vga console preference [default])");
46
47 unsigned int i915_fbpercrtc __always_unused = 0;
48 module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
49
50 int i915_panel_ignore_lid __read_mostly = 1;
51 module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
52 MODULE_PARM_DESC(panel_ignore_lid,
53                 "Override lid status (0=autodetect, 1=autodetect disabled [default], "
54                 "-1=force lid closed, -2=force lid open)");
55
56 unsigned int i915_powersave __read_mostly = 1;
57 module_param_named(powersave, i915_powersave, int, 0600);
58 MODULE_PARM_DESC(powersave,
59                 "Enable powersavings, fbc, downclocking, etc. (default: true)");
60
61 int i915_semaphores __read_mostly = -1;
62 module_param_named(semaphores, i915_semaphores, int, 0600);
63 MODULE_PARM_DESC(semaphores,
64                 "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
65
66 int i915_enable_rc6 __read_mostly = -1;
67 module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
68 MODULE_PARM_DESC(i915_enable_rc6,
69                 "Enable power-saving render C-state 6. "
70                 "Different stages can be selected via bitmask values "
71                 "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
72                 "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
73                 "default: -1 (use per-chip default)");
74
75 int i915_enable_fbc __read_mostly = -1;
76 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
77 MODULE_PARM_DESC(i915_enable_fbc,
78                 "Enable frame buffer compression for power savings "
79                 "(default: -1 (use per-chip default))");
80
81 unsigned int i915_lvds_downclock __read_mostly = 0;
82 module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
83 MODULE_PARM_DESC(lvds_downclock,
84                 "Use panel (LVDS/eDP) downclocking for power savings "
85                 "(default: false)");
86
87 int i915_lvds_channel_mode __read_mostly;
88 module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
89 MODULE_PARM_DESC(lvds_channel_mode,
90                  "Specify LVDS channel mode "
91                  "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
92
93 int i915_panel_use_ssc __read_mostly = -1;
94 module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
95 MODULE_PARM_DESC(lvds_use_ssc,
96                 "Use Spread Spectrum Clock with panels [LVDS/eDP] "
97                 "(default: auto from VBT)");
98
99 int i915_vbt_sdvo_panel_type __read_mostly = -1;
100 module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
101 MODULE_PARM_DESC(vbt_sdvo_panel_type,
102                 "Override/Ignore selection of SDVO panel mode in the VBT "
103                 "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
104
105 static bool i915_try_reset __read_mostly = true;
106 module_param_named(reset, i915_try_reset, bool, 0600);
107 MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
108
109 bool i915_enable_hangcheck __read_mostly = true;
110 module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
111 MODULE_PARM_DESC(enable_hangcheck,
112                 "Periodically check GPU activity for detecting hangs. "
113                 "WARNING: Disabling this can cause system wide hangs. "
114                 "(default: true)");
115
116 int i915_enable_ppgtt __read_mostly = -1;
117 module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0600);
118 MODULE_PARM_DESC(i915_enable_ppgtt,
119                 "Enable PPGTT (default: true)");
120
121 int i915_enable_psr __read_mostly = 0;
122 module_param_named(enable_psr, i915_enable_psr, int, 0600);
123 MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
124
125 unsigned int i915_preliminary_hw_support __read_mostly = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT);
126 module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
127 MODULE_PARM_DESC(preliminary_hw_support,
128                 "Enable preliminary hardware support.");
129
130 int i915_disable_power_well __read_mostly = 1;
131 module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
132 MODULE_PARM_DESC(disable_power_well,
133                  "Disable the power well when possible (default: true)");
134
135 int i915_enable_ips __read_mostly = 1;
136 module_param_named(enable_ips, i915_enable_ips, int, 0600);
137 MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
138
139 bool i915_fastboot __read_mostly = 0;
140 module_param_named(fastboot, i915_fastboot, bool, 0600);
141 MODULE_PARM_DESC(fastboot, "Try to skip unnecessary mode sets at boot time "
142                  "(default: false)");
143
144 int i915_enable_pc8 __read_mostly = 1;
145 module_param_named(enable_pc8, i915_enable_pc8, int, 0600);
146 MODULE_PARM_DESC(enable_pc8, "Enable support for low power package C states (PC8+) (default: true)");
147
148 int i915_pc8_timeout __read_mostly = 5000;
149 module_param_named(pc8_timeout, i915_pc8_timeout, int, 0600);
150 MODULE_PARM_DESC(pc8_timeout, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
151
152 bool i915_prefault_disable __read_mostly;
153 module_param_named(prefault_disable, i915_prefault_disable, bool, 0600);
154 MODULE_PARM_DESC(prefault_disable,
155                 "Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
156
157 static struct drm_driver driver;
158 extern int intel_agp_enabled;
159
160 static const struct intel_device_info intel_i830_info = {
161         .gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2,
162         .has_overlay = 1, .overlay_needs_physical = 1,
163 };
164
165 static const struct intel_device_info intel_845g_info = {
166         .gen = 2, .num_pipes = 1,
167         .has_overlay = 1, .overlay_needs_physical = 1,
168 };
169
170 static const struct intel_device_info intel_i85x_info = {
171         .gen = 2, .is_i85x = 1, .is_mobile = 1, .num_pipes = 2,
172         .cursor_needs_physical = 1,
173         .has_overlay = 1, .overlay_needs_physical = 1,
174 };
175
176 static const struct intel_device_info intel_i865g_info = {
177         .gen = 2, .num_pipes = 1,
178         .has_overlay = 1, .overlay_needs_physical = 1,
179 };
180
181 static const struct intel_device_info intel_i915g_info = {
182         .gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2,
183         .has_overlay = 1, .overlay_needs_physical = 1,
184 };
185 static const struct intel_device_info intel_i915gm_info = {
186         .gen = 3, .is_mobile = 1, .num_pipes = 2,
187         .cursor_needs_physical = 1,
188         .has_overlay = 1, .overlay_needs_physical = 1,
189         .supports_tv = 1,
190 };
191 static const struct intel_device_info intel_i945g_info = {
192         .gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2,
193         .has_overlay = 1, .overlay_needs_physical = 1,
194 };
195 static const struct intel_device_info intel_i945gm_info = {
196         .gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2,
197         .has_hotplug = 1, .cursor_needs_physical = 1,
198         .has_overlay = 1, .overlay_needs_physical = 1,
199         .supports_tv = 1,
200 };
201
202 static const struct intel_device_info intel_i965g_info = {
203         .gen = 4, .is_broadwater = 1, .num_pipes = 2,
204         .has_hotplug = 1,
205         .has_overlay = 1,
206 };
207
208 static const struct intel_device_info intel_i965gm_info = {
209         .gen = 4, .is_crestline = 1, .num_pipes = 2,
210         .is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
211         .has_overlay = 1,
212         .supports_tv = 1,
213 };
214
215 static const struct intel_device_info intel_g33_info = {
216         .gen = 3, .is_g33 = 1, .num_pipes = 2,
217         .need_gfx_hws = 1, .has_hotplug = 1,
218         .has_overlay = 1,
219 };
220
221 static const struct intel_device_info intel_g45_info = {
222         .gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2,
223         .has_pipe_cxsr = 1, .has_hotplug = 1,
224         .has_bsd_ring = 1,
225 };
226
227 static const struct intel_device_info intel_gm45_info = {
228         .gen = 4, .is_g4x = 1, .num_pipes = 2,
229         .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
230         .has_pipe_cxsr = 1, .has_hotplug = 1,
231         .supports_tv = 1,
232         .has_bsd_ring = 1,
233 };
234
235 static const struct intel_device_info intel_pineview_info = {
236         .gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2,
237         .need_gfx_hws = 1, .has_hotplug = 1,
238         .has_overlay = 1,
239 };
240
241 static const struct intel_device_info intel_ironlake_d_info = {
242         .gen = 5, .num_pipes = 2,
243         .need_gfx_hws = 1, .has_hotplug = 1,
244         .has_bsd_ring = 1,
245 };
246
247 static const struct intel_device_info intel_ironlake_m_info = {
248         .gen = 5, .is_mobile = 1, .num_pipes = 2,
249         .need_gfx_hws = 1, .has_hotplug = 1,
250         .has_fbc = 1,
251         .has_bsd_ring = 1,
252 };
253
254 static const struct intel_device_info intel_sandybridge_d_info = {
255         .gen = 6, .num_pipes = 2,
256         .need_gfx_hws = 1, .has_hotplug = 1,
257         .has_bsd_ring = 1,
258         .has_blt_ring = 1,
259         .has_llc = 1,
260 };
261
262 static const struct intel_device_info intel_sandybridge_m_info = {
263         .gen = 6, .is_mobile = 1, .num_pipes = 2,
264         .need_gfx_hws = 1, .has_hotplug = 1,
265         .has_fbc = 1,
266         .has_bsd_ring = 1,
267         .has_blt_ring = 1,
268         .has_llc = 1,
269 };
270
271 #define GEN7_FEATURES  \
272         .gen = 7, .num_pipes = 3, \
273         .need_gfx_hws = 1, .has_hotplug = 1, \
274         .has_bsd_ring = 1, \
275         .has_blt_ring = 1, \
276         .has_llc = 1
277
278 static const struct intel_device_info intel_ivybridge_d_info = {
279         GEN7_FEATURES,
280         .is_ivybridge = 1,
281 };
282
283 static const struct intel_device_info intel_ivybridge_m_info = {
284         GEN7_FEATURES,
285         .is_ivybridge = 1,
286         .is_mobile = 1,
287         .has_fbc = 1,
288 };
289
290 static const struct intel_device_info intel_ivybridge_q_info = {
291         GEN7_FEATURES,
292         .is_ivybridge = 1,
293         .num_pipes = 0, /* legal, last one wins */
294 };
295
296 static const struct intel_device_info intel_valleyview_m_info = {
297         GEN7_FEATURES,
298         .is_mobile = 1,
299         .num_pipes = 2,
300         .is_valleyview = 1,
301         .display_mmio_offset = VLV_DISPLAY_BASE,
302         .has_llc = 0, /* legal, last one wins */
303 };
304
305 static const struct intel_device_info intel_valleyview_d_info = {
306         GEN7_FEATURES,
307         .num_pipes = 2,
308         .is_valleyview = 1,
309         .display_mmio_offset = VLV_DISPLAY_BASE,
310         .has_llc = 0, /* legal, last one wins */
311 };
312
313 static const struct intel_device_info intel_haswell_d_info = {
314         GEN7_FEATURES,
315         .is_haswell = 1,
316         .has_ddi = 1,
317         .has_fpga_dbg = 1,
318         .has_vebox_ring = 1,
319 };
320
321 static const struct intel_device_info intel_haswell_m_info = {
322         GEN7_FEATURES,
323         .is_haswell = 1,
324         .is_mobile = 1,
325         .has_ddi = 1,
326         .has_fpga_dbg = 1,
327         .has_fbc = 1,
328         .has_vebox_ring = 1,
329 };
330
331 /*
332  * Make sure any device matches here are from most specific to most
333  * general.  For example, since the Quanta match is based on the subsystem
334  * and subvendor IDs, we need it to come before the more general IVB
335  * PCI ID matches, otherwise we'll use the wrong info struct above.
336  */
337 #define INTEL_PCI_IDS \
338         INTEL_I830_IDS(&intel_i830_info),       \
339         INTEL_I845G_IDS(&intel_845g_info),      \
340         INTEL_I85X_IDS(&intel_i85x_info),       \
341         INTEL_I865G_IDS(&intel_i865g_info),     \
342         INTEL_I915G_IDS(&intel_i915g_info),     \
343         INTEL_I915GM_IDS(&intel_i915gm_info),   \
344         INTEL_I945G_IDS(&intel_i945g_info),     \
345         INTEL_I945GM_IDS(&intel_i945gm_info),   \
346         INTEL_I965G_IDS(&intel_i965g_info),     \
347         INTEL_G33_IDS(&intel_g33_info),         \
348         INTEL_I965GM_IDS(&intel_i965gm_info),   \
349         INTEL_GM45_IDS(&intel_gm45_info),       \
350         INTEL_G45_IDS(&intel_g45_info),         \
351         INTEL_PINEVIEW_IDS(&intel_pineview_info),       \
352         INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info),   \
353         INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info),   \
354         INTEL_SNB_D_IDS(&intel_sandybridge_d_info),     \
355         INTEL_SNB_M_IDS(&intel_sandybridge_m_info),     \
356         INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */ \
357         INTEL_IVB_M_IDS(&intel_ivybridge_m_info),       \
358         INTEL_IVB_D_IDS(&intel_ivybridge_d_info),       \
359         INTEL_HSW_D_IDS(&intel_haswell_d_info), \
360         INTEL_HSW_M_IDS(&intel_haswell_m_info), \
361         INTEL_VLV_M_IDS(&intel_valleyview_m_info),      \
362         INTEL_VLV_D_IDS(&intel_valleyview_d_info)
363
364 static const struct pci_device_id pciidlist[] = {               /* aka */
365         INTEL_PCI_IDS,
366         {0, 0, 0}
367 };
368
369 #if defined(CONFIG_DRM_I915_KMS)
370 MODULE_DEVICE_TABLE(pci, pciidlist);
371 #endif
372
373 void intel_detect_pch(struct drm_device *dev)
374 {
375         struct drm_i915_private *dev_priv = dev->dev_private;
376         struct pci_dev *pch;
377
378         /* In all current cases, num_pipes is equivalent to the PCH_NOP setting
379          * (which really amounts to a PCH but no South Display).
380          */
381         if (INTEL_INFO(dev)->num_pipes == 0) {
382                 dev_priv->pch_type = PCH_NOP;
383                 return;
384         }
385
386         /*
387          * The reason to probe ISA bridge instead of Dev31:Fun0 is to
388          * make graphics device passthrough work easy for VMM, that only
389          * need to expose ISA bridge to let driver know the real hardware
390          * underneath. This is a requirement from virtualization team.
391          *
392          * In some virtualized environments (e.g. XEN), there is irrelevant
393          * ISA bridge in the system. To work reliably, we should scan trhough
394          * all the ISA bridge devices and check for the first match, instead
395          * of only checking the first one.
396          */
397         pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
398         while (pch) {
399                 struct pci_dev *curr = pch;
400                 if (pch->vendor == PCI_VENDOR_ID_INTEL) {
401                         unsigned short id;
402                         id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
403                         dev_priv->pch_id = id;
404
405                         if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
406                                 dev_priv->pch_type = PCH_IBX;
407                                 DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
408                                 WARN_ON(!IS_GEN5(dev));
409                         } else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
410                                 dev_priv->pch_type = PCH_CPT;
411                                 DRM_DEBUG_KMS("Found CougarPoint PCH\n");
412                                 WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
413                         } else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
414                                 /* PantherPoint is CPT compatible */
415                                 dev_priv->pch_type = PCH_CPT;
416                                 DRM_DEBUG_KMS("Found PantherPoint PCH\n");
417                                 WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
418                         } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
419                                 dev_priv->pch_type = PCH_LPT;
420                                 DRM_DEBUG_KMS("Found LynxPoint PCH\n");
421                                 WARN_ON(!IS_HASWELL(dev));
422                                 WARN_ON(IS_ULT(dev));
423                         } else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
424                                 dev_priv->pch_type = PCH_LPT;
425                                 DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
426                                 WARN_ON(!IS_HASWELL(dev));
427                                 WARN_ON(!IS_ULT(dev));
428                         } else {
429                                 goto check_next;
430                         }
431                         pci_dev_put(pch);
432                         break;
433                 }
434 check_next:
435                 pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, curr);
436                 pci_dev_put(curr);
437         }
438         if (!pch)
439                 DRM_DEBUG_KMS("No PCH found?\n");
440 }
441
442 bool i915_semaphore_is_enabled(struct drm_device *dev)
443 {
444         if (INTEL_INFO(dev)->gen < 6)
445                 return 0;
446
447         if (i915_semaphores >= 0)
448                 return i915_semaphores;
449
450 #ifdef CONFIG_INTEL_IOMMU
451         /* Enable semaphores on SNB when IO remapping is off */
452         if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
453                 return false;
454 #endif
455
456         return 1;
457 }
458
459 static int i915_drm_freeze(struct drm_device *dev)
460 {
461         struct drm_i915_private *dev_priv = dev->dev_private;
462         struct drm_crtc *crtc;
463
464         /* ignore lid events during suspend */
465         mutex_lock(&dev_priv->modeset_restore_lock);
466         dev_priv->modeset_restore = MODESET_SUSPENDED;
467         mutex_unlock(&dev_priv->modeset_restore_lock);
468
469         /* We do a lot of poking in a lot of registers, make sure they work
470          * properly. */
471         hsw_disable_package_c8(dev_priv);
472         intel_set_power_well(dev, true);
473
474         drm_kms_helper_poll_disable(dev);
475
476         pci_save_state(dev->pdev);
477
478         /* If KMS is active, we do the leavevt stuff here */
479         if (drm_core_check_feature(dev, DRIVER_MODESET)) {
480                 int error;
481
482                 mutex_lock(&dev->struct_mutex);
483                 error = i915_gem_idle(dev);
484                 mutex_unlock(&dev->struct_mutex);
485                 if (error) {
486                         dev_err(&dev->pdev->dev,
487                                 "GEM idle failed, resume might fail\n");
488                         return error;
489                 }
490
491                 cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
492
493                 drm_irq_uninstall(dev);
494                 dev_priv->enable_hotplug_processing = false;
495                 /*
496                  * Disable CRTCs directly since we want to preserve sw state
497                  * for _thaw.
498                  */
499                 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
500                         dev_priv->display.crtc_disable(crtc);
501
502                 intel_modeset_suspend_hw(dev);
503         }
504
505         i915_save_state(dev);
506
507         intel_opregion_fini(dev);
508
509         console_lock();
510         intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED);
511         console_unlock();
512
513         return 0;
514 }
515
516 int i915_suspend(struct drm_device *dev, pm_message_t state)
517 {
518         int error;
519
520         if (!dev || !dev->dev_private) {
521                 DRM_ERROR("dev: %p\n", dev);
522                 DRM_ERROR("DRM not initialized, aborting suspend.\n");
523                 return -ENODEV;
524         }
525
526         if (state.event == PM_EVENT_PRETHAW)
527                 return 0;
528
529
530         if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
531                 return 0;
532
533         error = i915_drm_freeze(dev);
534         if (error)
535                 return error;
536
537         if (state.event == PM_EVENT_SUSPEND) {
538                 /* Shut down the device */
539                 pci_disable_device(dev->pdev);
540                 pci_set_power_state(dev->pdev, PCI_D3hot);
541         }
542
543         return 0;
544 }
545
546 void intel_console_resume(struct work_struct *work)
547 {
548         struct drm_i915_private *dev_priv =
549                 container_of(work, struct drm_i915_private,
550                              console_resume_work);
551         struct drm_device *dev = dev_priv->dev;
552
553         console_lock();
554         intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
555         console_unlock();
556 }
557
558 static void intel_resume_hotplug(struct drm_device *dev)
559 {
560         struct drm_mode_config *mode_config = &dev->mode_config;
561         struct intel_encoder *encoder;
562
563         mutex_lock(&mode_config->mutex);
564         DRM_DEBUG_KMS("running encoder hotplug functions\n");
565
566         list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
567                 if (encoder->hot_plug)
568                         encoder->hot_plug(encoder);
569
570         mutex_unlock(&mode_config->mutex);
571
572         /* Just fire off a uevent and let userspace tell us what to do */
573         drm_helper_hpd_irq_event(dev);
574 }
575
576 static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
577 {
578         struct drm_i915_private *dev_priv = dev->dev_private;
579         int error = 0;
580
581         intel_uncore_early_sanitize(dev);
582
583         intel_uncore_sanitize(dev);
584
585         if (drm_core_check_feature(dev, DRIVER_MODESET) &&
586             restore_gtt_mappings) {
587                 mutex_lock(&dev->struct_mutex);
588                 i915_gem_restore_gtt_mappings(dev);
589                 mutex_unlock(&dev->struct_mutex);
590         }
591
592         intel_init_power_well(dev);
593
594         i915_restore_state(dev);
595         intel_opregion_setup(dev);
596
597         /* KMS EnterVT equivalent */
598         if (drm_core_check_feature(dev, DRIVER_MODESET)) {
599                 intel_init_pch_refclk(dev);
600
601                 mutex_lock(&dev->struct_mutex);
602
603                 error = i915_gem_init_hw(dev);
604                 mutex_unlock(&dev->struct_mutex);
605
606                 /* We need working interrupts for modeset enabling ... */
607                 drm_irq_install(dev);
608
609                 intel_modeset_init_hw(dev);
610
611                 drm_modeset_lock_all(dev);
612                 intel_modeset_setup_hw_state(dev, true);
613                 drm_modeset_unlock_all(dev);
614
615                 /*
616                  * ... but also need to make sure that hotplug processing
617                  * doesn't cause havoc. Like in the driver load code we don't
618                  * bother with the tiny race here where we might loose hotplug
619                  * notifications.
620                  * */
621                 intel_hpd_init(dev);
622                 dev_priv->enable_hotplug_processing = true;
623                 /* Config may have changed between suspend and resume */
624                 intel_resume_hotplug(dev);
625         }
626
627         intel_opregion_init(dev);
628
629         /*
630          * The console lock can be pretty contented on resume due
631          * to all the printk activity.  Try to keep it out of the hot
632          * path of resume if possible.
633          */
634         if (console_trylock()) {
635                 intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
636                 console_unlock();
637         } else {
638                 schedule_work(&dev_priv->console_resume_work);
639         }
640
641         /* Undo what we did at i915_drm_freeze so the refcount goes back to the
642          * expected level. */
643         hsw_enable_package_c8(dev_priv);
644
645         mutex_lock(&dev_priv->modeset_restore_lock);
646         dev_priv->modeset_restore = MODESET_DONE;
647         mutex_unlock(&dev_priv->modeset_restore_lock);
648         return error;
649 }
650
651 static int i915_drm_thaw(struct drm_device *dev)
652 {
653         return __i915_drm_thaw(dev, true);
654 }
655
656 int i915_resume(struct drm_device *dev)
657 {
658         struct drm_i915_private *dev_priv = dev->dev_private;
659         int ret;
660
661         if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
662                 return 0;
663
664         if (pci_enable_device(dev->pdev))
665                 return -EIO;
666
667         pci_set_master(dev->pdev);
668
669         /*
670          * Platforms with opregion should have sane BIOS, older ones (gen3 and
671          * earlier) need to restore the GTT mappings since the BIOS might clear
672          * all our scratch PTEs.
673          */
674         ret = __i915_drm_thaw(dev, !dev_priv->opregion.header);
675         if (ret)
676                 return ret;
677
678         drm_kms_helper_poll_enable(dev);
679         return 0;
680 }
681
682 /**
683  * i915_reset - reset chip after a hang
684  * @dev: drm device to reset
685  *
686  * Reset the chip.  Useful if a hang is detected. Returns zero on successful
687  * reset or otherwise an error code.
688  *
689  * Procedure is fairly simple:
690  *   - reset the chip using the reset reg
691  *   - re-init context state
692  *   - re-init hardware status page
693  *   - re-init ring buffer
694  *   - re-init interrupt state
695  *   - re-init display
696  */
697 int i915_reset(struct drm_device *dev)
698 {
699         drm_i915_private_t *dev_priv = dev->dev_private;
700         bool simulated;
701         int ret;
702
703         if (!i915_try_reset)
704                 return 0;
705
706         mutex_lock(&dev->struct_mutex);
707
708         i915_gem_reset(dev);
709
710         simulated = dev_priv->gpu_error.stop_rings != 0;
711
712         ret = intel_gpu_reset(dev);
713
714         /* Also reset the gpu hangman. */
715         if (simulated) {
716                 DRM_INFO("Simulated gpu hang, resetting stop_rings\n");
717                 dev_priv->gpu_error.stop_rings = 0;
718                 if (ret == -ENODEV) {
719                         DRM_ERROR("Reset not implemented, but ignoring "
720                                   "error for simulated gpu hangs\n");
721                         ret = 0;
722                 }
723         }
724
725         if (ret) {
726                 DRM_ERROR("Failed to reset chip.\n");
727                 mutex_unlock(&dev->struct_mutex);
728                 return ret;
729         }
730
731         /* Ok, now get things going again... */
732
733         /*
734          * Everything depends on having the GTT running, so we need to start
735          * there.  Fortunately we don't need to do this unless we reset the
736          * chip at a PCI level.
737          *
738          * Next we need to restore the context, but we don't use those
739          * yet either...
740          *
741          * Ring buffer needs to be re-initialized in the KMS case, or if X
742          * was running at the time of the reset (i.e. we weren't VT
743          * switched away).
744          */
745         if (drm_core_check_feature(dev, DRIVER_MODESET) ||
746                         !dev_priv->ums.mm_suspended) {
747                 struct intel_ring_buffer *ring;
748                 int i;
749
750                 dev_priv->ums.mm_suspended = 0;
751
752                 i915_gem_init_swizzling(dev);
753
754                 for_each_ring(ring, dev_priv, i)
755                         ring->init(ring);
756
757                 i915_gem_context_init(dev);
758                 if (dev_priv->mm.aliasing_ppgtt) {
759                         ret = dev_priv->mm.aliasing_ppgtt->enable(dev);
760                         if (ret)
761                                 i915_gem_cleanup_aliasing_ppgtt(dev);
762                 }
763
764                 /*
765                  * It would make sense to re-init all the other hw state, at
766                  * least the rps/rc6/emon init done within modeset_init_hw. For
767                  * some unknown reason, this blows up my ilk, so don't.
768                  */
769
770                 mutex_unlock(&dev->struct_mutex);
771
772                 drm_irq_uninstall(dev);
773                 drm_irq_install(dev);
774                 intel_hpd_init(dev);
775         } else {
776                 mutex_unlock(&dev->struct_mutex);
777         }
778
779         return 0;
780 }
781
782 static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
783 {
784         struct intel_device_info *intel_info =
785                 (struct intel_device_info *) ent->driver_data;
786
787         if (IS_PRELIMINARY_HW(intel_info) && !i915_preliminary_hw_support) {
788                 DRM_INFO("This hardware requires preliminary hardware support.\n"
789                          "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
790                 return -ENODEV;
791         }
792
793         /* Only bind to function 0 of the device. Early generations
794          * used function 1 as a placeholder for multi-head. This causes
795          * us confusion instead, especially on the systems where both
796          * functions have the same PCI-ID!
797          */
798         if (PCI_FUNC(pdev->devfn))
799                 return -ENODEV;
800
801         /* We've managed to ship a kms-enabled ddx that shipped with an XvMC
802          * implementation for gen3 (and only gen3) that used legacy drm maps
803          * (gasp!) to share buffers between X and the client. Hence we need to
804          * keep around the fake agp stuff for gen3, even when kms is enabled. */
805         if (intel_info->gen != 3) {
806                 driver.driver_features &=
807                         ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP);
808         } else if (!intel_agp_enabled) {
809                 DRM_ERROR("drm/i915 can't work without intel_agp module!\n");
810                 return -ENODEV;
811         }
812
813         return drm_get_pci_dev(pdev, ent, &driver);
814 }
815
816 static void
817 i915_pci_remove(struct pci_dev *pdev)
818 {
819         struct drm_device *dev = pci_get_drvdata(pdev);
820
821         drm_put_dev(dev);
822 }
823
824 static int i915_pm_suspend(struct device *dev)
825 {
826         struct pci_dev *pdev = to_pci_dev(dev);
827         struct drm_device *drm_dev = pci_get_drvdata(pdev);
828         int error;
829
830         if (!drm_dev || !drm_dev->dev_private) {
831                 dev_err(dev, "DRM not initialized, aborting suspend.\n");
832                 return -ENODEV;
833         }
834
835         if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
836                 return 0;
837
838         error = i915_drm_freeze(drm_dev);
839         if (error)
840                 return error;
841
842         pci_disable_device(pdev);
843         pci_set_power_state(pdev, PCI_D3hot);
844
845         return 0;
846 }
847
848 static int i915_pm_resume(struct device *dev)
849 {
850         struct pci_dev *pdev = to_pci_dev(dev);
851         struct drm_device *drm_dev = pci_get_drvdata(pdev);
852
853         return i915_resume(drm_dev);
854 }
855
856 static int i915_pm_freeze(struct device *dev)
857 {
858         struct pci_dev *pdev = to_pci_dev(dev);
859         struct drm_device *drm_dev = pci_get_drvdata(pdev);
860
861         if (!drm_dev || !drm_dev->dev_private) {
862                 dev_err(dev, "DRM not initialized, aborting suspend.\n");
863                 return -ENODEV;
864         }
865
866         return i915_drm_freeze(drm_dev);
867 }
868
869 static int i915_pm_thaw(struct device *dev)
870 {
871         struct pci_dev *pdev = to_pci_dev(dev);
872         struct drm_device *drm_dev = pci_get_drvdata(pdev);
873
874         return i915_drm_thaw(drm_dev);
875 }
876
877 static int i915_pm_poweroff(struct device *dev)
878 {
879         struct pci_dev *pdev = to_pci_dev(dev);
880         struct drm_device *drm_dev = pci_get_drvdata(pdev);
881
882         return i915_drm_freeze(drm_dev);
883 }
884
885 static const struct dev_pm_ops i915_pm_ops = {
886         .suspend = i915_pm_suspend,
887         .resume = i915_pm_resume,
888         .freeze = i915_pm_freeze,
889         .thaw = i915_pm_thaw,
890         .poweroff = i915_pm_poweroff,
891         .restore = i915_pm_resume,
892 };
893
894 static const struct vm_operations_struct i915_gem_vm_ops = {
895         .fault = i915_gem_fault,
896         .open = drm_gem_vm_open,
897         .close = drm_gem_vm_close,
898 };
899
900 static const struct file_operations i915_driver_fops = {
901         .owner = THIS_MODULE,
902         .open = drm_open,
903         .release = drm_release,
904         .unlocked_ioctl = drm_ioctl,
905         .mmap = drm_gem_mmap,
906         .poll = drm_poll,
907         .read = drm_read,
908 #ifdef CONFIG_COMPAT
909         .compat_ioctl = i915_compat_ioctl,
910 #endif
911         .llseek = noop_llseek,
912 };
913
914 static struct drm_driver driver = {
915         /* Don't use MTRRs here; the Xserver or userspace app should
916          * deal with them for Intel hardware.
917          */
918         .driver_features =
919             DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
920             DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
921             DRIVER_RENDER,
922         .load = i915_driver_load,
923         .unload = i915_driver_unload,
924         .open = i915_driver_open,
925         .lastclose = i915_driver_lastclose,
926         .preclose = i915_driver_preclose,
927         .postclose = i915_driver_postclose,
928
929         /* Used in place of i915_pm_ops for non-DRIVER_MODESET */
930         .suspend = i915_suspend,
931         .resume = i915_resume,
932
933         .device_is_agp = i915_driver_device_is_agp,
934         .master_create = i915_master_create,
935         .master_destroy = i915_master_destroy,
936 #if defined(CONFIG_DEBUG_FS)
937         .debugfs_init = i915_debugfs_init,
938         .debugfs_cleanup = i915_debugfs_cleanup,
939 #endif
940         .gem_free_object = i915_gem_free_object,
941         .gem_vm_ops = &i915_gem_vm_ops,
942
943         .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
944         .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
945         .gem_prime_export = i915_gem_prime_export,
946         .gem_prime_import = i915_gem_prime_import,
947
948         .dumb_create = i915_gem_dumb_create,
949         .dumb_map_offset = i915_gem_mmap_gtt,
950         .dumb_destroy = drm_gem_dumb_destroy,
951         .ioctls = i915_ioctls,
952         .fops = &i915_driver_fops,
953         .name = DRIVER_NAME,
954         .desc = DRIVER_DESC,
955         .date = DRIVER_DATE,
956         .major = DRIVER_MAJOR,
957         .minor = DRIVER_MINOR,
958         .patchlevel = DRIVER_PATCHLEVEL,
959 };
960
961 static struct pci_driver i915_pci_driver = {
962         .name = DRIVER_NAME,
963         .id_table = pciidlist,
964         .probe = i915_pci_probe,
965         .remove = i915_pci_remove,
966         .driver.pm = &i915_pm_ops,
967 };
968
969 static int __init i915_init(void)
970 {
971         driver.num_ioctls = i915_max_ioctl;
972
973         /*
974          * If CONFIG_DRM_I915_KMS is set, default to KMS unless
975          * explicitly disabled with the module pararmeter.
976          *
977          * Otherwise, just follow the parameter (defaulting to off).
978          *
979          * Allow optional vga_text_mode_force boot option to override
980          * the default behavior.
981          */
982 #if defined(CONFIG_DRM_I915_KMS)
983         if (i915_modeset != 0)
984                 driver.driver_features |= DRIVER_MODESET;
985 #endif
986         if (i915_modeset == 1)
987                 driver.driver_features |= DRIVER_MODESET;
988
989 #ifdef CONFIG_VGA_CONSOLE
990         if (vgacon_text_force() && i915_modeset == -1)
991                 driver.driver_features &= ~DRIVER_MODESET;
992 #endif
993
994         if (!(driver.driver_features & DRIVER_MODESET))
995                 driver.get_vblank_timestamp = NULL;
996
997         return drm_pci_init(&driver, &i915_pci_driver);
998 }
999
1000 static void __exit i915_exit(void)
1001 {
1002         drm_pci_exit(&driver, &i915_pci_driver);
1003 }
1004
1005 module_init(i915_init);
1006 module_exit(i915_exit);
1007
1008 MODULE_AUTHOR(DRIVER_AUTHOR);
1009 MODULE_DESCRIPTION(DRIVER_DESC);
1010 MODULE_LICENSE("GPL and additional rights");