drivers/gpu/drm/i915/intel_crt.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <eric@anholt.net>
  25  */
  26
  27 #include <linux/dmi.h>
  28 #include <linux/i2c.h>
  29 #include <linux/slab.h>
  30 #include <drm/drmP.h>
  31 #include <drm/drm_crtc.h>
  32 #include <drm/drm_crtc_helper.h>
  33 #include <drm/drm_edid.h>
  34 #include "intel_drv.h"
  35 #include <drm/i915_drm.h>
  36 #include "i915_drv.h"
  37
  38 /* Here's the desired hotplug mode */
  39 #define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |                \
  40                            ADPA_CRT_HOTPLUG_WARMUP_10MS |               \
  41                            ADPA_CRT_HOTPLUG_SAMPLE_4S |                 \
  42                            ADPA_CRT_HOTPLUG_VOLTAGE_50 |                \
  43                            ADPA_CRT_HOTPLUG_VOLREF_325MV |              \
  44                            ADPA_CRT_HOTPLUG_ENABLE)
  45
  46 struct intel_crt {
  47         struct intel_encoder base;
  48         /* DPMS state is stored in the connector, which we need in the
  49          * encoder's enable/disable callbacks */
  50         struct intel_connector *connector;
  51         bool force_hotplug_required;
  52         u32 adpa_reg;
  53 };
  54
  55 static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
  56 {
  57         return container_of(intel_attached_encoder(connector),
  58                             struct intel_crt, base);
  59 }
  60
  61 static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
  62 {
  63         return container_of(encoder, struct intel_crt, base);
  64 }
  65
  66 static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
  67                                    enum pipe *pipe)
  68 {
  69         struct drm_device *dev = encoder->base.dev;
  70         struct drm_i915_private *dev_priv = dev->dev_private;
  71         struct intel_crt *crt = intel_encoder_to_crt(encoder);
  72         u32 tmp;
  73
  74         tmp = I915_READ(crt->adpa_reg);
  75
  76         if (!(tmp & ADPA_DAC_ENABLE))
  77                 return false;
  78
  79         if (HAS_PCH_CPT(dev))
  80                 *pipe = PORT_TO_PIPE_CPT(tmp);
  81         else
  82                 *pipe = PORT_TO_PIPE(tmp);
  83
  84         return true;
  85 }
  86
  87 static void intel_crt_get_config(struct intel_encoder *encoder,
  88                                  struct intel_crtc_config *pipe_config)
  89 {
  90         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
  91         struct intel_crt *crt = intel_encoder_to_crt(encoder);
  92         u32 tmp, flags = 0;
  93
  94         tmp = I915_READ(crt->adpa_reg);
  95
  96         if (tmp & ADPA_HSYNC_ACTIVE_HIGH)
  97                 flags |= DRM_MODE_FLAG_PHSYNC;
  98         else
  99                 flags |= DRM_MODE_FLAG_NHSYNC;
 100
 101         if (tmp & ADPA_VSYNC_ACTIVE_HIGH)
 102                 flags |= DRM_MODE_FLAG_PVSYNC;
 103         else
 104                 flags |= DRM_MODE_FLAG_NVSYNC;
 105
 106         pipe_config->adjusted_mode.flags |= flags;
 107 }
 108
 109 /* Note: The caller is required to filter out dpms modes not supported by the
 110  * platform. */
 111 static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
 112 {
 113         struct drm_device *dev = encoder->base.dev;
 114         struct drm_i915_private *dev_priv = dev->dev_private;
 115         struct intel_crt *crt = intel_encoder_to_crt(encoder);
 116         u32 temp;
 117
 118         temp = I915_READ(crt->adpa_reg);
 119         temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
 120         temp &= ~ADPA_DAC_ENABLE;
 121
 122         switch (mode) {
 123         case DRM_MODE_DPMS_ON:
 124                 temp |= ADPA_DAC_ENABLE;
 125                 break;
 126         case DRM_MODE_DPMS_STANDBY:
 127                 temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
 128                 break;
 129         case DRM_MODE_DPMS_SUSPEND:
 130                 temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
 131                 break;
 132         case DRM_MODE_DPMS_OFF:
 133                 temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
 134                 break;
 135         }
 136
 137         I915_WRITE(crt->adpa_reg, temp);
 138 }
 139
 140 static void intel_disable_crt(struct intel_encoder *encoder)
 141 {
 142         intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
 143 }
 144
 145 static void intel_enable_crt(struct intel_encoder *encoder)
 146 {
 147         struct intel_crt *crt = intel_encoder_to_crt(encoder);
 148
 149         intel_crt_set_dpms(encoder, crt->connector->base.dpms);
 150 }
 151
 152 /* Special dpms function to support cloning between dvo/sdvo/crt. */
 153 static void intel_crt_dpms(struct drm_connector *connector, int mode)
 154 {
 155         struct drm_device *dev = connector->dev;
 156         struct intel_encoder *encoder = intel_attached_encoder(connector);
 157         struct drm_crtc *crtc;
 158         int old_dpms;
 159
 160         /* PCH platforms and VLV only support on/off. */
 161         if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON)
 162                 mode = DRM_MODE_DPMS_OFF;
 163
 164         if (mode == connector->dpms)
 165                 return;
 166
 167         old_dpms = connector->dpms;
 168         connector->dpms = mode;
 169
 170         /* Only need to change hw state when actually enabled */
 171         crtc = encoder->base.crtc;
 172         if (!crtc) {
 173                 encoder->connectors_active = false;
 174                 return;
 175         }
 176
 177         /* We need the pipe to run for anything but OFF. */
 178         if (mode == DRM_MODE_DPMS_OFF)
 179                 encoder->connectors_active = false;
 180         else
 181                 encoder->connectors_active = true;
 182
 183         /* We call connector dpms manually below in case pipe dpms doesn't
 184          * change due to cloning. */
 185         if (mode < old_dpms) {
 186                 /* From off to on, enable the pipe first. */
 187                 intel_crtc_update_dpms(crtc);
 188
 189                 intel_crt_set_dpms(encoder, mode);
 190         } else {
 191                 intel_crt_set_dpms(encoder, mode);
 192
 193                 intel_crtc_update_dpms(crtc);
 194         }
 195
 196         intel_modeset_check_state(connector->dev);
 197 }
 198
 199 static int intel_crt_mode_valid(struct drm_connector *connector,
 200                                 struct drm_display_mode *mode)
 201 {
 202         struct drm_device *dev = connector->dev;
 203
 204         int max_clock = 0;
 205         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 206                 return MODE_NO_DBLESCAN;
 207
 208         if (mode->clock < 25000)
 209                 return MODE_CLOCK_LOW;
 210
 211         if (IS_GEN2(dev))
 212                 max_clock = 350000;
 213         else
 214                 max_clock = 400000;
 215         if (mode->clock > max_clock)
 216                 return MODE_CLOCK_HIGH;
 217
 218         /* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */
 219         if (HAS_PCH_LPT(dev) &&
 220             (ironlake_get_lanes_required(mode->clock, 270000, 24) > 2))
 221                 return MODE_CLOCK_HIGH;
 222
 223         return MODE_OK;
 224 }
 225
 226 static bool intel_crt_compute_config(struct intel_encoder *encoder,
 227                                      struct intel_crtc_config *pipe_config)
 228 {
 229         struct drm_device *dev = encoder->base.dev;
 230
 231         if (HAS_PCH_SPLIT(dev))
 232                 pipe_config->has_pch_encoder = true;
 233
 234         /* LPT FDI RX only supports 8bpc. */
 235         if (HAS_PCH_LPT(dev))
 236                 pipe_config->pipe_bpp = 24;
 237
 238         return true;
 239 }
 240
 241 static void intel_crt_mode_set(struct drm_encoder *encoder,
 242                                struct drm_display_mode *mode,
 243                                struct drm_display_mode *adjusted_mode)
 244 {
 245
 246         struct drm_device *dev = encoder->dev;
 247         struct drm_crtc *crtc = encoder->crtc;
 248         struct intel_crt *crt =
 249                 intel_encoder_to_crt(to_intel_encoder(encoder));
 250         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 251         struct drm_i915_private *dev_priv = dev->dev_private;
 252         u32 adpa;
 253
 254         if (HAS_PCH_SPLIT(dev))
 255                 adpa = ADPA_HOTPLUG_BITS;
 256         else
 257                 adpa = 0;
 258
 259         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 260                 adpa |= ADPA_HSYNC_ACTIVE_HIGH;
 261         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 262                 adpa |= ADPA_VSYNC_ACTIVE_HIGH;
 263
 264         /* For CPT allow 3 pipe config, for others just use A or B */
 265         if (HAS_PCH_LPT(dev))
 266                 ; /* Those bits don't exist here */
 267         else if (HAS_PCH_CPT(dev))
 268                 adpa |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
 269         else if (intel_crtc->pipe == 0)
 270                 adpa |= ADPA_PIPE_A_SELECT;
 271         else
 272                 adpa |= ADPA_PIPE_B_SELECT;
 273
 274         if (!HAS_PCH_SPLIT(dev))
 275                 I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);
 276
 277         I915_WRITE(crt->adpa_reg, adpa);
 278 }
 279
 280 static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 281 {
 282         struct drm_device *dev = connector->dev;
 283         struct intel_crt *crt = intel_attached_crt(connector);
 284         struct drm_i915_private *dev_priv = dev->dev_private;
 285         u32 adpa;
 286         bool ret;
 287
 288         /* The first time through, trigger an explicit detection cycle */
 289         if (crt->force_hotplug_required) {
 290                 bool turn_off_dac = HAS_PCH_SPLIT(dev);
 291                 u32 save_adpa;
 292
 293                 crt->force_hotplug_required = 0;
 294
 295                 save_adpa = adpa = I915_READ(crt->adpa_reg);
 296                 DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 297
 298                 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
 299                 if (turn_off_dac)
 300                         adpa &= ~ADPA_DAC_ENABLE;
 301
 302                 I915_WRITE(crt->adpa_reg, adpa);
 303
 304                 if (wait_for((I915_READ(crt->adpa_reg) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
 305                              1000))
 306                         DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
 307
 308                 if (turn_off_dac) {
 309                         I915_WRITE(crt->adpa_reg, save_adpa);
 310                         POSTING_READ(crt->adpa_reg);
 311                 }
 312         }
 313
 314         /* Check the status to see if both blue and green are on now */
 315         adpa = I915_READ(crt->adpa_reg);
 316         if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 317                 ret = true;
 318         else
 319                 ret = false;
 320         DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
 321
 322         return ret;
 323 }
 324
 325 static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
 326 {
 327         struct drm_device *dev = connector->dev;
 328         struct intel_crt *crt = intel_attached_crt(connector);
 329         struct drm_i915_private *dev_priv = dev->dev_private;
 330         u32 adpa;
 331         bool ret;
 332         u32 save_adpa;
 333
 334         save_adpa = adpa = I915_READ(crt->adpa_reg);
 335         DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 336
 337         adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
 338
 339         I915_WRITE(crt->adpa_reg, adpa);
 340
 341         if (wait_for((I915_READ(crt->adpa_reg) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
 342                      1000)) {
 343                 DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
 344                 I915_WRITE(crt->adpa_reg, save_adpa);
 345         }
 346
 347         /* Check the status to see if both blue and green are on now */
 348         adpa = I915_READ(crt->adpa_reg);
 349         if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 350                 ret = true;
 351         else
 352                 ret = false;
 353
 354         DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
 355
 356         /* FIXME: debug force function and remove */
 357         ret = true;
 358
 359         return ret;
 360 }
 361
 362 /**
 363  * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
 364  *
 365  * Not for i915G/i915GM
 366  *
 367  * \return true if CRT is connected.
 368  * \return false if CRT is disconnected.
 369  */
 370 static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 371 {
 372         struct drm_device *dev = connector->dev;
 373         struct drm_i915_private *dev_priv = dev->dev_private;
 374         u32 hotplug_en, orig, stat;
 375         bool ret = false;
 376         int i, tries = 0;
 377
 378         if (HAS_PCH_SPLIT(dev))
 379                 return intel_ironlake_crt_detect_hotplug(connector);
 380
 381         if (IS_VALLEYVIEW(dev))
 382                 return valleyview_crt_detect_hotplug(connector);
 383
 384         /*
 385          * On 4 series desktop, CRT detect sequence need to be done twice
 386          * to get a reliable result.
 387          */
 388
 389         if (IS_G4X(dev) && !IS_GM45(dev))
 390                 tries = 2;
 391         else
 392                 tries = 1;
 393         hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
 394         hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 395
 396         for (i = 0; i < tries ; i++) {
 397                 /* turn on the FORCE_DETECT */
 398                 I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 399                 /* wait for FORCE_DETECT to go off */
 400                 if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
 401                               CRT_HOTPLUG_FORCE_DETECT) == 0,
 402                              1000))
 403                         DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
 404         }
 405
 406         stat = I915_READ(PORT_HOTPLUG_STAT);
 407         if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
 408                 ret = true;
 409
 410         /* clear the interrupt we just generated, if any */
 411         I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
 412
 413         /* and put the bits back */
 414         I915_WRITE(PORT_HOTPLUG_EN, orig);
 415
 416         return ret;
 417 }
 418
 419 static struct edid *intel_crt_get_edid(struct drm_connector *connector,
 420                                 struct i2c_adapter *i2c)
 421 {
 422         struct edid *edid;
 423
 424         edid = drm_get_edid(connector, i2c);
 425
 426         if (!edid && !intel_gmbus_is_forced_bit(i2c)) {
 427                 DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n");
 428                 intel_gmbus_force_bit(i2c, true);
 429                 edid = drm_get_edid(connector, i2c);
 430                 intel_gmbus_force_bit(i2c, false);
 431         }
 432
 433         return edid;
 434 }
 435
 436 /* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */
 437 static int intel_crt_ddc_get_modes(struct drm_connector *connector,
 438                                 struct i2c_adapter *adapter)
 439 {
 440         struct edid *edid;
 441         int ret;
 442
 443         edid = intel_crt_get_edid(connector, adapter);
 444         if (!edid)
 445                 return 0;
 446
 447         ret = intel_connector_update_modes(connector, edid);
 448         kfree(edid);
 449
 450         return ret;
 451 }
 452
 453 static bool intel_crt_detect_ddc(struct drm_connector *connector)
 454 {
 455         struct intel_crt *crt = intel_attached_crt(connector);
 456         struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
 457         struct edid *edid;
 458         struct i2c_adapter *i2c;
 459
 460         BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG);
 461
 462         i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
 463         edid = intel_crt_get_edid(connector, i2c);
 464
 465         if (edid) {
 466                 bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
 467
 468                 /*
 469                  * This may be a DVI-I connector with a shared DDC
 470                  * link between analog and digital outputs, so we
 471                  * have to check the EDID input spec of the attached device.
 472                  */
 473                 if (!is_digital) {
 474                         DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
 475                         return true;
 476                 }
 477
 478                 DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
 479         } else {
 480                 DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [no valid EDID found]\n");
 481         }
 482
 483         kfree(edid);
 484
 485         return false;
 486 }
 487
 488 static enum drm_connector_status
 489 intel_crt_load_detect(struct intel_crt *crt)
 490 {
 491         struct drm_device *dev = crt->base.base.dev;
 492         struct drm_i915_private *dev_priv = dev->dev_private;
 493         uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;
 494         uint32_t save_bclrpat;
 495         uint32_t save_vtotal;
 496         uint32_t vtotal, vactive;
 497         uint32_t vsample;
 498         uint32_t vblank, vblank_start, vblank_end;
 499         uint32_t dsl;
 500         uint32_t bclrpat_reg;
 501         uint32_t vtotal_reg;
 502         uint32_t vblank_reg;
 503         uint32_t vsync_reg;
 504         uint32_t pipeconf_reg;
 505         uint32_t pipe_dsl_reg;
 506         uint8_t st00;
 507         enum drm_connector_status status;
 508
 509         DRM_DEBUG_KMS("starting load-detect on CRT\n");
 510
 511         bclrpat_reg = BCLRPAT(pipe);
 512         vtotal_reg = VTOTAL(pipe);
 513         vblank_reg = VBLANK(pipe);
 514         vsync_reg = VSYNC(pipe);
 515         pipeconf_reg = PIPECONF(pipe);
 516         pipe_dsl_reg = PIPEDSL(pipe);
 517
 518         save_bclrpat = I915_READ(bclrpat_reg);
 519         save_vtotal = I915_READ(vtotal_reg);
 520         vblank = I915_READ(vblank_reg);
 521
 522         vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
 523         vactive = (save_vtotal & 0x7ff) + 1;
 524
 525         vblank_start = (vblank & 0xfff) + 1;
 526         vblank_end = ((vblank >> 16) & 0xfff) + 1;
 527
 528         /* Set the border color to purple. */
 529         I915_WRITE(bclrpat_reg, 0x500050);
 530
 531         if (!IS_GEN2(dev)) {
 532                 uint32_t pipeconf = I915_READ(pipeconf_reg);
 533                 I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
 534                 POSTING_READ(pipeconf_reg);
 535                 /* Wait for next Vblank to substitue
 536                  * border color for Color info */
 537                 intel_wait_for_vblank(dev, pipe);
 538                 st00 = I915_READ8(VGA_MSR_WRITE);
 539                 status = ((st00 & (1 << 4)) != 0) ?
 540                         connector_status_connected :
 541                         connector_status_disconnected;
 542
 543                 I915_WRITE(pipeconf_reg, pipeconf);
 544         } else {
 545                 bool restore_vblank = false;
 546                 int count, detect;
 547
 548                 /*
 549                 * If there isn't any border, add some.
 550                 * Yes, this will flicker
 551                 */
 552                 if (vblank_start <= vactive && vblank_end >= vtotal) {
 553                         uint32_t vsync = I915_READ(vsync_reg);
 554                         uint32_t vsync_start = (vsync & 0xffff) + 1;
 555
 556                         vblank_start = vsync_start;
 557                         I915_WRITE(vblank_reg,
 558                                    (vblank_start - 1) |
 559                                    ((vblank_end - 1) << 16));
 560                         restore_vblank = true;
 561                 }
 562                 /* sample in the vertical border, selecting the larger one */
 563                 if (vblank_start - vactive >= vtotal - vblank_end)
 564                         vsample = (vblank_start + vactive) >> 1;
 565                 else
 566                         vsample = (vtotal + vblank_end) >> 1;
 567
 568                 /*
 569                  * Wait for the border to be displayed
 570                  */
 571                 while (I915_READ(pipe_dsl_reg) >= vactive)
 572                         ;
 573                 while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
 574                         ;
 575                 /*
 576                  * Watch ST00 for an entire scanline
 577                  */
 578                 detect = 0;
 579                 count = 0;
 580                 do {
 581                         count++;
 582                         /* Read the ST00 VGA status register */
 583                         st00 = I915_READ8(VGA_MSR_WRITE);
 584                         if (st00 & (1 << 4))
 585                                 detect++;
 586                 } while ((I915_READ(pipe_dsl_reg) == dsl));
 587
 588                 /* restore vblank if necessary */
 589                 if (restore_vblank)
 590                         I915_WRITE(vblank_reg, vblank);
 591                 /*
 592                  * If more than 3/4 of the scanline detected a monitor,
 593                  * then it is assumed to be present. This works even on i830,
 594                  * where there isn't any way to force the border color across
 595                  * the screen
 596                  */
 597                 status = detect * 4 > count * 3 ?
 598                          connector_status_connected :
 599                          connector_status_disconnected;
 600         }
 601
 602         /* Restore previous settings */
 603         I915_WRITE(bclrpat_reg, save_bclrpat);
 604
 605         return status;
 606 }
 607
 608 static enum drm_connector_status
 609 intel_crt_detect(struct drm_connector *connector, bool force)
 610 {
 611         struct drm_device *dev = connector->dev;
 612         struct intel_crt *crt = intel_attached_crt(connector);
 613         enum drm_connector_status status;
 614         struct intel_load_detect_pipe tmp;
 615
 616         if (I915_HAS_HOTPLUG(dev)) {
 617                 /* We can not rely on the HPD pin always being correctly wired
 618                  * up, for example many KVM do not pass it through, and so
 619                  * only trust an assertion that the monitor is connected.
 620                  */
 621                 if (intel_crt_detect_hotplug(connector)) {
 622                         DRM_DEBUG_KMS("CRT detected via hotplug\n");
 623                         return connector_status_connected;
 624                 } else
 625                         DRM_DEBUG_KMS("CRT not detected via hotplug\n");
 626         }
 627
 628         if (intel_crt_detect_ddc(connector))
 629                 return connector_status_connected;
 630
 631         /* Load detection is broken on HPD capable machines. Whoever wants a
 632          * broken monitor (without edid) to work behind a broken kvm (that fails
 633          * to have the right resistors for HP detection) needs to fix this up.
 634          * For now just bail out. */
 635         if (I915_HAS_HOTPLUG(dev))
 636                 return connector_status_disconnected;
 637
 638         if (!force)
 639                 return connector->status;
 640
 641         /* for pre-945g platforms use load detect */
 642         if (intel_get_load_detect_pipe(connector, NULL, &tmp)) {
 643                 if (intel_crt_detect_ddc(connector))
 644                         status = connector_status_connected;
 645                 else
 646                         status = intel_crt_load_detect(crt);
 647                 intel_release_load_detect_pipe(connector, &tmp);
 648         } else
 649                 status = connector_status_unknown;
 650
 651         return status;
 652 }
 653
 654 static void intel_crt_destroy(struct drm_connector *connector)
 655 {
 656         drm_sysfs_connector_remove(connector);
 657         drm_connector_cleanup(connector);
 658         kfree(connector);
 659 }
 660
 661 static int intel_crt_get_modes(struct drm_connector *connector)
 662 {
 663         struct drm_device *dev = connector->dev;
 664         struct drm_i915_private *dev_priv = dev->dev_private;
 665         int ret;
 666         struct i2c_adapter *i2c;
 667
 668         i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
 669         ret = intel_crt_ddc_get_modes(connector, i2c);
 670         if (ret || !IS_G4X(dev))
 671                 return ret;
 672
 673         /* Try to probe digital port for output in DVI-I -> VGA mode. */
 674         i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
 675         return intel_crt_ddc_get_modes(connector, i2c);
 676 }
 677
 678 static int intel_crt_set_property(struct drm_connector *connector,
 679                                   struct drm_property *property,
 680                                   uint64_t value)
 681 {
 682         return 0;
 683 }
 684
 685 static void intel_crt_reset(struct drm_connector *connector)
 686 {
 687         struct drm_device *dev = connector->dev;
 688         struct drm_i915_private *dev_priv = dev->dev_private;
 689         struct intel_crt *crt = intel_attached_crt(connector);
 690
 691         if (HAS_PCH_SPLIT(dev)) {
 692                 u32 adpa;
 693
 694                 adpa = I915_READ(crt->adpa_reg);
 695                 adpa &= ~ADPA_CRT_HOTPLUG_MASK;
 696                 adpa |= ADPA_HOTPLUG_BITS;
 697                 I915_WRITE(crt->adpa_reg, adpa);
 698                 POSTING_READ(crt->adpa_reg);
 699
 700                 DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
 701                 crt->force_hotplug_required = 1;
 702         }
 703
 704 }
 705
 706 /*
 707  * Routines for controlling stuff on the analog port
 708  */
 709
 710 static const struct drm_encoder_helper_funcs crt_encoder_funcs = {
 711         .mode_set = intel_crt_mode_set,
 712 };
 713
 714 static const struct drm_connector_funcs intel_crt_connector_funcs = {
 715         .reset = intel_crt_reset,
 716         .dpms = intel_crt_dpms,
 717         .detect = intel_crt_detect,
 718         .fill_modes = drm_helper_probe_single_connector_modes,
 719         .destroy = intel_crt_destroy,
 720         .set_property = intel_crt_set_property,
 721 };
 722
 723 static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
 724         .mode_valid = intel_crt_mode_valid,
 725         .get_modes = intel_crt_get_modes,
 726         .best_encoder = intel_best_encoder,
 727 };
 728
 729 static const struct drm_encoder_funcs intel_crt_enc_funcs = {
 730         .destroy = intel_encoder_destroy,
 731 };
 732
 733 static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
 734 {
 735         DRM_INFO("Skipping CRT initialization for %s\n", id->ident);
 736         return 1;
 737 }
 738
 739 static const struct dmi_system_id intel_no_crt[] = {
 740         {
 741                 .callback = intel_no_crt_dmi_callback,
 742                 .ident = "ACER ZGB",
 743                 .matches = {
 744                         DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
 745                         DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
 746                 },
 747         },
 748         { }
 749 };
 750
 751 void intel_crt_init(struct drm_device *dev)
 752 {
 753         struct drm_connector *connector;
 754         struct intel_crt *crt;
 755         struct intel_connector *intel_connector;
 756         struct drm_i915_private *dev_priv = dev->dev_private;
 757
 758         /* Skip machines without VGA that falsely report hotplug events */
 759         if (dmi_check_system(intel_no_crt))
 760                 return;
 761
 762         crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
 763         if (!crt)
 764                 return;
 765
 766         intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
 767         if (!intel_connector) {
 768                 kfree(crt);
 769                 return;
 770         }
 771
 772         connector = &intel_connector->base;
 773         crt->connector = intel_connector;
 774         drm_connector_init(dev, &intel_connector->base,
 775                            &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 776
 777         drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
 778                          DRM_MODE_ENCODER_DAC);
 779
 780         intel_connector_attach_encoder(intel_connector, &crt->base);
 781
 782         crt->base.type = INTEL_OUTPUT_ANALOG;
 783         crt->base.cloneable = true;
 784         if (IS_I830(dev))
 785                 crt->base.crtc_mask = (1 << 0);
 786         else
 787                 crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
 788
 789         if (IS_GEN2(dev))
 790                 connector->interlace_allowed = 0;
 791         else
 792                 connector->interlace_allowed = 1;
 793         connector->doublescan_allowed = 0;
 794
 795         if (HAS_PCH_SPLIT(dev))
 796                 crt->adpa_reg = PCH_ADPA;
 797         else if (IS_VALLEYVIEW(dev))
 798                 crt->adpa_reg = VLV_ADPA;
 799         else
 800                 crt->adpa_reg = ADPA;
 801
 802         crt->base.compute_config = intel_crt_compute_config;
 803         crt->base.disable = intel_disable_crt;
 804         crt->base.enable = intel_enable_crt;
 805         crt->base.get_config = intel_crt_get_config;
 806         if (I915_HAS_HOTPLUG(dev))
 807                 crt->base.hpd_pin = HPD_CRT;
 808         if (HAS_DDI(dev))
 809                 crt->base.get_hw_state = intel_ddi_get_hw_state;
 810         else
 811                 crt->base.get_hw_state = intel_crt_get_hw_state;
 812         intel_connector->get_hw_state = intel_connector_get_hw_state;
 813
 814         drm_encoder_helper_add(&crt->base.base, &crt_encoder_funcs);
 815         drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 816
 817         drm_sysfs_connector_add(connector);
 818
 819         if (!I915_HAS_HOTPLUG(dev))
 820                 intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 821
 822         /*
 823          * Configure the automatic hotplug detection stuff
 824          */
 825         crt->force_hotplug_required = 0;
 826
 827         /*
 828          * TODO: find a proper way to discover whether we need to set the the
 829          * polarity and link reversal bits or not, instead of relying on the
 830          * BIOS.
 831          */
 832         if (HAS_PCH_LPT(dev)) {
 833                 u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT |
 834                                  FDI_RX_LINK_REVERSAL_OVERRIDE;
 835
 836                 dev_priv->fdi_rx_config = I915_READ(_FDI_RXA_CTL) & fdi_config;
 837         }
 838 }