2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/dmi.h>
28 #include <linux/module.h>
29 #include <linux/input.h>
30 #include <linux/i2c.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/vgaarb.h>
34 #include <drm/drm_edid.h>
36 #include "intel_drv.h"
37 #include <drm/i915_drm.h>
39 #include "i915_trace.h"
40 #include <drm/drm_atomic.h>
41 #include <drm/drm_atomic_helper.h>
42 #include <drm/drm_dp_helper.h>
43 #include <drm/drm_crtc_helper.h>
44 #include <drm/drm_plane_helper.h>
45 #include <drm/drm_rect.h>
46 #include <linux/dma_remapping.h>
47 #include <linux/reservation.h>
48 #include <linux/dma-buf.h>
50 /* Primary plane formats for gen <= 3 */
51 static const uint32_t i8xx_primary_formats[] = {
58 /* Primary plane formats for gen >= 4 */
59 static const uint32_t i965_primary_formats[] = {
64 DRM_FORMAT_XRGB2101010,
65 DRM_FORMAT_XBGR2101010,
68 static const uint32_t skl_primary_formats[] = {
75 DRM_FORMAT_XRGB2101010,
76 DRM_FORMAT_XBGR2101010,
84 static const uint32_t intel_cursor_formats[] = {
88 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
89 struct intel_crtc_state *pipe_config);
90 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
91 struct intel_crtc_state *pipe_config);
93 static int intel_framebuffer_init(struct drm_device *dev,
94 struct intel_framebuffer *ifb,
95 struct drm_mode_fb_cmd2 *mode_cmd,
96 struct drm_i915_gem_object *obj);
97 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc);
98 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc);
99 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
100 struct intel_link_m_n *m_n,
101 struct intel_link_m_n *m2_n2);
102 static void ironlake_set_pipeconf(struct drm_crtc *crtc);
103 static void haswell_set_pipeconf(struct drm_crtc *crtc);
104 static void intel_set_pipe_csc(struct drm_crtc *crtc);
105 static void vlv_prepare_pll(struct intel_crtc *crtc,
106 const struct intel_crtc_state *pipe_config);
107 static void chv_prepare_pll(struct intel_crtc *crtc,
108 const struct intel_crtc_state *pipe_config);
109 static void intel_begin_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
110 static void intel_finish_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
111 static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
112 struct intel_crtc_state *crtc_state);
113 static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
115 static void skylake_pfit_enable(struct intel_crtc *crtc);
116 static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
117 static void ironlake_pfit_enable(struct intel_crtc *crtc);
118 static void intel_modeset_setup_hw_state(struct drm_device *dev);
119 static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc);
127 int p2_slow, p2_fast;
130 typedef struct intel_limit intel_limit_t;
132 intel_range_t dot, vco, n, m, m1, m2, p, p1;
136 /* returns HPLL frequency in kHz */
137 static int valleyview_get_vco(struct drm_i915_private *dev_priv)
139 int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
141 /* Obtain SKU information */
142 mutex_lock(&dev_priv->sb_lock);
143 hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
144 CCK_FUSE_HPLL_FREQ_MASK;
145 mutex_unlock(&dev_priv->sb_lock);
147 return vco_freq[hpll_freq] * 1000;
150 static int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
151 const char *name, u32 reg)
156 if (dev_priv->hpll_freq == 0)
157 dev_priv->hpll_freq = valleyview_get_vco(dev_priv);
159 mutex_lock(&dev_priv->sb_lock);
160 val = vlv_cck_read(dev_priv, reg);
161 mutex_unlock(&dev_priv->sb_lock);
163 divider = val & CCK_FREQUENCY_VALUES;
165 WARN((val & CCK_FREQUENCY_STATUS) !=
166 (divider << CCK_FREQUENCY_STATUS_SHIFT),
167 "%s change in progress\n", name);
169 return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, divider + 1);
173 intel_pch_rawclk(struct drm_i915_private *dev_priv)
175 return (I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000;
179 intel_vlv_hrawclk(struct drm_i915_private *dev_priv)
181 return vlv_get_cck_clock_hpll(dev_priv, "hrawclk",
182 CCK_DISPLAY_REF_CLOCK_CONTROL);
186 intel_g4x_hrawclk(struct drm_i915_private *dev_priv)
190 /* hrawclock is 1/4 the FSB frequency */
191 clkcfg = I915_READ(CLKCFG);
192 switch (clkcfg & CLKCFG_FSB_MASK) {
201 case CLKCFG_FSB_1067:
203 case CLKCFG_FSB_1333:
205 /* these two are just a guess; one of them might be right */
206 case CLKCFG_FSB_1600:
207 case CLKCFG_FSB_1600_ALT:
214 static void intel_update_rawclk(struct drm_i915_private *dev_priv)
216 if (HAS_PCH_SPLIT(dev_priv))
217 dev_priv->rawclk_freq = intel_pch_rawclk(dev_priv);
218 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
219 dev_priv->rawclk_freq = intel_vlv_hrawclk(dev_priv);
220 else if (IS_G4X(dev_priv) || IS_PINEVIEW(dev_priv))
221 dev_priv->rawclk_freq = intel_g4x_hrawclk(dev_priv);
223 return; /* no rawclk on other platforms, or no need to know it */
225 DRM_DEBUG_DRIVER("rawclk rate: %d kHz\n", dev_priv->rawclk_freq);
228 static void intel_update_czclk(struct drm_i915_private *dev_priv)
230 if (!(IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)))
233 dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
234 CCK_CZ_CLOCK_CONTROL);
236 DRM_DEBUG_DRIVER("CZ clock rate: %d kHz\n", dev_priv->czclk_freq);
239 static inline u32 /* units of 100MHz */
240 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
241 const struct intel_crtc_state *pipe_config)
243 if (HAS_DDI(dev_priv))
244 return pipe_config->port_clock; /* SPLL */
245 else if (IS_GEN5(dev_priv))
246 return ((I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2) * 10000;
251 static const intel_limit_t intel_limits_i8xx_dac = {
252 .dot = { .min = 25000, .max = 350000 },
253 .vco = { .min = 908000, .max = 1512000 },
254 .n = { .min = 2, .max = 16 },
255 .m = { .min = 96, .max = 140 },
256 .m1 = { .min = 18, .max = 26 },
257 .m2 = { .min = 6, .max = 16 },
258 .p = { .min = 4, .max = 128 },
259 .p1 = { .min = 2, .max = 33 },
260 .p2 = { .dot_limit = 165000,
261 .p2_slow = 4, .p2_fast = 2 },
264 static const intel_limit_t intel_limits_i8xx_dvo = {
265 .dot = { .min = 25000, .max = 350000 },
266 .vco = { .min = 908000, .max = 1512000 },
267 .n = { .min = 2, .max = 16 },
268 .m = { .min = 96, .max = 140 },
269 .m1 = { .min = 18, .max = 26 },
270 .m2 = { .min = 6, .max = 16 },
271 .p = { .min = 4, .max = 128 },
272 .p1 = { .min = 2, .max = 33 },
273 .p2 = { .dot_limit = 165000,
274 .p2_slow = 4, .p2_fast = 4 },
277 static const intel_limit_t intel_limits_i8xx_lvds = {
278 .dot = { .min = 25000, .max = 350000 },
279 .vco = { .min = 908000, .max = 1512000 },
280 .n = { .min = 2, .max = 16 },
281 .m = { .min = 96, .max = 140 },
282 .m1 = { .min = 18, .max = 26 },
283 .m2 = { .min = 6, .max = 16 },
284 .p = { .min = 4, .max = 128 },
285 .p1 = { .min = 1, .max = 6 },
286 .p2 = { .dot_limit = 165000,
287 .p2_slow = 14, .p2_fast = 7 },
290 static const intel_limit_t intel_limits_i9xx_sdvo = {
291 .dot = { .min = 20000, .max = 400000 },
292 .vco = { .min = 1400000, .max = 2800000 },
293 .n = { .min = 1, .max = 6 },
294 .m = { .min = 70, .max = 120 },
295 .m1 = { .min = 8, .max = 18 },
296 .m2 = { .min = 3, .max = 7 },
297 .p = { .min = 5, .max = 80 },
298 .p1 = { .min = 1, .max = 8 },
299 .p2 = { .dot_limit = 200000,
300 .p2_slow = 10, .p2_fast = 5 },
303 static const intel_limit_t intel_limits_i9xx_lvds = {
304 .dot = { .min = 20000, .max = 400000 },
305 .vco = { .min = 1400000, .max = 2800000 },
306 .n = { .min = 1, .max = 6 },
307 .m = { .min = 70, .max = 120 },
308 .m1 = { .min = 8, .max = 18 },
309 .m2 = { .min = 3, .max = 7 },
310 .p = { .min = 7, .max = 98 },
311 .p1 = { .min = 1, .max = 8 },
312 .p2 = { .dot_limit = 112000,
313 .p2_slow = 14, .p2_fast = 7 },
317 static const intel_limit_t intel_limits_g4x_sdvo = {
318 .dot = { .min = 25000, .max = 270000 },
319 .vco = { .min = 1750000, .max = 3500000},
320 .n = { .min = 1, .max = 4 },
321 .m = { .min = 104, .max = 138 },
322 .m1 = { .min = 17, .max = 23 },
323 .m2 = { .min = 5, .max = 11 },
324 .p = { .min = 10, .max = 30 },
325 .p1 = { .min = 1, .max = 3},
326 .p2 = { .dot_limit = 270000,
332 static const intel_limit_t intel_limits_g4x_hdmi = {
333 .dot = { .min = 22000, .max = 400000 },
334 .vco = { .min = 1750000, .max = 3500000},
335 .n = { .min = 1, .max = 4 },
336 .m = { .min = 104, .max = 138 },
337 .m1 = { .min = 16, .max = 23 },
338 .m2 = { .min = 5, .max = 11 },
339 .p = { .min = 5, .max = 80 },
340 .p1 = { .min = 1, .max = 8},
341 .p2 = { .dot_limit = 165000,
342 .p2_slow = 10, .p2_fast = 5 },
345 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
346 .dot = { .min = 20000, .max = 115000 },
347 .vco = { .min = 1750000, .max = 3500000 },
348 .n = { .min = 1, .max = 3 },
349 .m = { .min = 104, .max = 138 },
350 .m1 = { .min = 17, .max = 23 },
351 .m2 = { .min = 5, .max = 11 },
352 .p = { .min = 28, .max = 112 },
353 .p1 = { .min = 2, .max = 8 },
354 .p2 = { .dot_limit = 0,
355 .p2_slow = 14, .p2_fast = 14
359 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
360 .dot = { .min = 80000, .max = 224000 },
361 .vco = { .min = 1750000, .max = 3500000 },
362 .n = { .min = 1, .max = 3 },
363 .m = { .min = 104, .max = 138 },
364 .m1 = { .min = 17, .max = 23 },
365 .m2 = { .min = 5, .max = 11 },
366 .p = { .min = 14, .max = 42 },
367 .p1 = { .min = 2, .max = 6 },
368 .p2 = { .dot_limit = 0,
369 .p2_slow = 7, .p2_fast = 7
373 static const intel_limit_t intel_limits_pineview_sdvo = {
374 .dot = { .min = 20000, .max = 400000},
375 .vco = { .min = 1700000, .max = 3500000 },
376 /* Pineview's Ncounter is a ring counter */
377 .n = { .min = 3, .max = 6 },
378 .m = { .min = 2, .max = 256 },
379 /* Pineview only has one combined m divider, which we treat as m2. */
380 .m1 = { .min = 0, .max = 0 },
381 .m2 = { .min = 0, .max = 254 },
382 .p = { .min = 5, .max = 80 },
383 .p1 = { .min = 1, .max = 8 },
384 .p2 = { .dot_limit = 200000,
385 .p2_slow = 10, .p2_fast = 5 },
388 static const intel_limit_t intel_limits_pineview_lvds = {
389 .dot = { .min = 20000, .max = 400000 },
390 .vco = { .min = 1700000, .max = 3500000 },
391 .n = { .min = 3, .max = 6 },
392 .m = { .min = 2, .max = 256 },
393 .m1 = { .min = 0, .max = 0 },
394 .m2 = { .min = 0, .max = 254 },
395 .p = { .min = 7, .max = 112 },
396 .p1 = { .min = 1, .max = 8 },
397 .p2 = { .dot_limit = 112000,
398 .p2_slow = 14, .p2_fast = 14 },
401 /* Ironlake / Sandybridge
403 * We calculate clock using (register_value + 2) for N/M1/M2, so here
404 * the range value for them is (actual_value - 2).
406 static const intel_limit_t intel_limits_ironlake_dac = {
407 .dot = { .min = 25000, .max = 350000 },
408 .vco = { .min = 1760000, .max = 3510000 },
409 .n = { .min = 1, .max = 5 },
410 .m = { .min = 79, .max = 127 },
411 .m1 = { .min = 12, .max = 22 },
412 .m2 = { .min = 5, .max = 9 },
413 .p = { .min = 5, .max = 80 },
414 .p1 = { .min = 1, .max = 8 },
415 .p2 = { .dot_limit = 225000,
416 .p2_slow = 10, .p2_fast = 5 },
419 static const intel_limit_t intel_limits_ironlake_single_lvds = {
420 .dot = { .min = 25000, .max = 350000 },
421 .vco = { .min = 1760000, .max = 3510000 },
422 .n = { .min = 1, .max = 3 },
423 .m = { .min = 79, .max = 118 },
424 .m1 = { .min = 12, .max = 22 },
425 .m2 = { .min = 5, .max = 9 },
426 .p = { .min = 28, .max = 112 },
427 .p1 = { .min = 2, .max = 8 },
428 .p2 = { .dot_limit = 225000,
429 .p2_slow = 14, .p2_fast = 14 },
432 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
433 .dot = { .min = 25000, .max = 350000 },
434 .vco = { .min = 1760000, .max = 3510000 },
435 .n = { .min = 1, .max = 3 },
436 .m = { .min = 79, .max = 127 },
437 .m1 = { .min = 12, .max = 22 },
438 .m2 = { .min = 5, .max = 9 },
439 .p = { .min = 14, .max = 56 },
440 .p1 = { .min = 2, .max = 8 },
441 .p2 = { .dot_limit = 225000,
442 .p2_slow = 7, .p2_fast = 7 },
445 /* LVDS 100mhz refclk limits. */
446 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
447 .dot = { .min = 25000, .max = 350000 },
448 .vco = { .min = 1760000, .max = 3510000 },
449 .n = { .min = 1, .max = 2 },
450 .m = { .min = 79, .max = 126 },
451 .m1 = { .min = 12, .max = 22 },
452 .m2 = { .min = 5, .max = 9 },
453 .p = { .min = 28, .max = 112 },
454 .p1 = { .min = 2, .max = 8 },
455 .p2 = { .dot_limit = 225000,
456 .p2_slow = 14, .p2_fast = 14 },
459 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
460 .dot = { .min = 25000, .max = 350000 },
461 .vco = { .min = 1760000, .max = 3510000 },
462 .n = { .min = 1, .max = 3 },
463 .m = { .min = 79, .max = 126 },
464 .m1 = { .min = 12, .max = 22 },
465 .m2 = { .min = 5, .max = 9 },
466 .p = { .min = 14, .max = 42 },
467 .p1 = { .min = 2, .max = 6 },
468 .p2 = { .dot_limit = 225000,
469 .p2_slow = 7, .p2_fast = 7 },
472 static const intel_limit_t intel_limits_vlv = {
474 * These are the data rate limits (measured in fast clocks)
475 * since those are the strictest limits we have. The fast
476 * clock and actual rate limits are more relaxed, so checking
477 * them would make no difference.
479 .dot = { .min = 25000 * 5, .max = 270000 * 5 },
480 .vco = { .min = 4000000, .max = 6000000 },
481 .n = { .min = 1, .max = 7 },
482 .m1 = { .min = 2, .max = 3 },
483 .m2 = { .min = 11, .max = 156 },
484 .p1 = { .min = 2, .max = 3 },
485 .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
488 static const intel_limit_t intel_limits_chv = {
490 * These are the data rate limits (measured in fast clocks)
491 * since those are the strictest limits we have. The fast
492 * clock and actual rate limits are more relaxed, so checking
493 * them would make no difference.
495 .dot = { .min = 25000 * 5, .max = 540000 * 5},
496 .vco = { .min = 4800000, .max = 6480000 },
497 .n = { .min = 1, .max = 1 },
498 .m1 = { .min = 2, .max = 2 },
499 .m2 = { .min = 24 << 22, .max = 175 << 22 },
500 .p1 = { .min = 2, .max = 4 },
501 .p2 = { .p2_slow = 1, .p2_fast = 14 },
504 static const intel_limit_t intel_limits_bxt = {
505 /* FIXME: find real dot limits */
506 .dot = { .min = 0, .max = INT_MAX },
507 .vco = { .min = 4800000, .max = 6700000 },
508 .n = { .min = 1, .max = 1 },
509 .m1 = { .min = 2, .max = 2 },
510 /* FIXME: find real m2 limits */
511 .m2 = { .min = 2 << 22, .max = 255 << 22 },
512 .p1 = { .min = 2, .max = 4 },
513 .p2 = { .p2_slow = 1, .p2_fast = 20 },
517 needs_modeset(struct drm_crtc_state *state)
519 return drm_atomic_crtc_needs_modeset(state);
523 * Returns whether any output on the specified pipe is of the specified type
525 bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type)
527 struct drm_device *dev = crtc->base.dev;
528 struct intel_encoder *encoder;
530 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
531 if (encoder->type == type)
538 * Returns whether any output on the specified pipe will have the specified
539 * type after a staged modeset is complete, i.e., the same as
540 * intel_pipe_has_type() but looking at encoder->new_crtc instead of
543 static bool intel_pipe_will_have_type(const struct intel_crtc_state *crtc_state,
546 struct drm_atomic_state *state = crtc_state->base.state;
547 struct drm_connector *connector;
548 struct drm_connector_state *connector_state;
549 struct intel_encoder *encoder;
550 int i, num_connectors = 0;
552 for_each_connector_in_state(state, connector, connector_state, i) {
553 if (connector_state->crtc != crtc_state->base.crtc)
558 encoder = to_intel_encoder(connector_state->best_encoder);
559 if (encoder->type == type)
563 WARN_ON(num_connectors == 0);
568 static const intel_limit_t *
569 intel_ironlake_limit(struct intel_crtc_state *crtc_state, int refclk)
571 struct drm_device *dev = crtc_state->base.crtc->dev;
572 const intel_limit_t *limit;
574 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
575 if (intel_is_dual_link_lvds(dev)) {
576 if (refclk == 100000)
577 limit = &intel_limits_ironlake_dual_lvds_100m;
579 limit = &intel_limits_ironlake_dual_lvds;
581 if (refclk == 100000)
582 limit = &intel_limits_ironlake_single_lvds_100m;
584 limit = &intel_limits_ironlake_single_lvds;
587 limit = &intel_limits_ironlake_dac;
592 static const intel_limit_t *
593 intel_g4x_limit(struct intel_crtc_state *crtc_state)
595 struct drm_device *dev = crtc_state->base.crtc->dev;
596 const intel_limit_t *limit;
598 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
599 if (intel_is_dual_link_lvds(dev))
600 limit = &intel_limits_g4x_dual_channel_lvds;
602 limit = &intel_limits_g4x_single_channel_lvds;
603 } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI) ||
604 intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
605 limit = &intel_limits_g4x_hdmi;
606 } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO)) {
607 limit = &intel_limits_g4x_sdvo;
608 } else /* The option is for other outputs */
609 limit = &intel_limits_i9xx_sdvo;
614 static const intel_limit_t *
615 intel_limit(struct intel_crtc_state *crtc_state, int refclk)
617 struct drm_device *dev = crtc_state->base.crtc->dev;
618 const intel_limit_t *limit;
621 limit = &intel_limits_bxt;
622 else if (HAS_PCH_SPLIT(dev))
623 limit = intel_ironlake_limit(crtc_state, refclk);
624 else if (IS_G4X(dev)) {
625 limit = intel_g4x_limit(crtc_state);
626 } else if (IS_PINEVIEW(dev)) {
627 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
628 limit = &intel_limits_pineview_lvds;
630 limit = &intel_limits_pineview_sdvo;
631 } else if (IS_CHERRYVIEW(dev)) {
632 limit = &intel_limits_chv;
633 } else if (IS_VALLEYVIEW(dev)) {
634 limit = &intel_limits_vlv;
635 } else if (!IS_GEN2(dev)) {
636 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
637 limit = &intel_limits_i9xx_lvds;
639 limit = &intel_limits_i9xx_sdvo;
641 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
642 limit = &intel_limits_i8xx_lvds;
643 else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
644 limit = &intel_limits_i8xx_dvo;
646 limit = &intel_limits_i8xx_dac;
652 * Platform specific helpers to calculate the port PLL loopback- (clock.m),
653 * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
654 * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
655 * The helpers' return value is the rate of the clock that is fed to the
656 * display engine's pipe which can be the above fast dot clock rate or a
657 * divided-down version of it.
659 /* m1 is reserved as 0 in Pineview, n is a ring counter */
660 static int pnv_calc_dpll_params(int refclk, intel_clock_t *clock)
662 clock->m = clock->m2 + 2;
663 clock->p = clock->p1 * clock->p2;
664 if (WARN_ON(clock->n == 0 || clock->p == 0))
666 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
667 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
672 static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
674 return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
677 static int i9xx_calc_dpll_params(int refclk, intel_clock_t *clock)
679 clock->m = i9xx_dpll_compute_m(clock);
680 clock->p = clock->p1 * clock->p2;
681 if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
683 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
684 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
689 static int vlv_calc_dpll_params(int refclk, intel_clock_t *clock)
691 clock->m = clock->m1 * clock->m2;
692 clock->p = clock->p1 * clock->p2;
693 if (WARN_ON(clock->n == 0 || clock->p == 0))
695 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
696 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
698 return clock->dot / 5;
701 int chv_calc_dpll_params(int refclk, intel_clock_t *clock)
703 clock->m = clock->m1 * clock->m2;
704 clock->p = clock->p1 * clock->p2;
705 if (WARN_ON(clock->n == 0 || clock->p == 0))
707 clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
709 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
711 return clock->dot / 5;
714 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
716 * Returns whether the given set of divisors are valid for a given refclk with
717 * the given connectors.
720 static bool intel_PLL_is_valid(struct drm_device *dev,
721 const intel_limit_t *limit,
722 const intel_clock_t *clock)
724 if (clock->n < limit->n.min || limit->n.max < clock->n)
725 INTELPllInvalid("n out of range\n");
726 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
727 INTELPllInvalid("p1 out of range\n");
728 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
729 INTELPllInvalid("m2 out of range\n");
730 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
731 INTELPllInvalid("m1 out of range\n");
733 if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev) &&
734 !IS_CHERRYVIEW(dev) && !IS_BROXTON(dev))
735 if (clock->m1 <= clock->m2)
736 INTELPllInvalid("m1 <= m2\n");
738 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) && !IS_BROXTON(dev)) {
739 if (clock->p < limit->p.min || limit->p.max < clock->p)
740 INTELPllInvalid("p out of range\n");
741 if (clock->m < limit->m.min || limit->m.max < clock->m)
742 INTELPllInvalid("m out of range\n");
745 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
746 INTELPllInvalid("vco out of range\n");
747 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
748 * connector, etc., rather than just a single range.
750 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
751 INTELPllInvalid("dot out of range\n");
757 i9xx_select_p2_div(const intel_limit_t *limit,
758 const struct intel_crtc_state *crtc_state,
761 struct drm_device *dev = crtc_state->base.crtc->dev;
763 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
765 * For LVDS just rely on its current settings for dual-channel.
766 * We haven't figured out how to reliably set up different
767 * single/dual channel state, if we even can.
769 if (intel_is_dual_link_lvds(dev))
770 return limit->p2.p2_fast;
772 return limit->p2.p2_slow;
774 if (target < limit->p2.dot_limit)
775 return limit->p2.p2_slow;
777 return limit->p2.p2_fast;
782 i9xx_find_best_dpll(const intel_limit_t *limit,
783 struct intel_crtc_state *crtc_state,
784 int target, int refclk, intel_clock_t *match_clock,
785 intel_clock_t *best_clock)
787 struct drm_device *dev = crtc_state->base.crtc->dev;
791 memset(best_clock, 0, sizeof(*best_clock));
793 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
795 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
797 for (clock.m2 = limit->m2.min;
798 clock.m2 <= limit->m2.max; clock.m2++) {
799 if (clock.m2 >= clock.m1)
801 for (clock.n = limit->n.min;
802 clock.n <= limit->n.max; clock.n++) {
803 for (clock.p1 = limit->p1.min;
804 clock.p1 <= limit->p1.max; clock.p1++) {
807 i9xx_calc_dpll_params(refclk, &clock);
808 if (!intel_PLL_is_valid(dev, limit,
812 clock.p != match_clock->p)
815 this_err = abs(clock.dot - target);
816 if (this_err < err) {
825 return (err != target);
829 pnv_find_best_dpll(const intel_limit_t *limit,
830 struct intel_crtc_state *crtc_state,
831 int target, int refclk, intel_clock_t *match_clock,
832 intel_clock_t *best_clock)
834 struct drm_device *dev = crtc_state->base.crtc->dev;
838 memset(best_clock, 0, sizeof(*best_clock));
840 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
842 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
844 for (clock.m2 = limit->m2.min;
845 clock.m2 <= limit->m2.max; clock.m2++) {
846 for (clock.n = limit->n.min;
847 clock.n <= limit->n.max; clock.n++) {
848 for (clock.p1 = limit->p1.min;
849 clock.p1 <= limit->p1.max; clock.p1++) {
852 pnv_calc_dpll_params(refclk, &clock);
853 if (!intel_PLL_is_valid(dev, limit,
857 clock.p != match_clock->p)
860 this_err = abs(clock.dot - target);
861 if (this_err < err) {
870 return (err != target);
874 g4x_find_best_dpll(const intel_limit_t *limit,
875 struct intel_crtc_state *crtc_state,
876 int target, int refclk, intel_clock_t *match_clock,
877 intel_clock_t *best_clock)
879 struct drm_device *dev = crtc_state->base.crtc->dev;
883 /* approximately equals target * 0.00585 */
884 int err_most = (target >> 8) + (target >> 9);
886 memset(best_clock, 0, sizeof(*best_clock));
888 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
890 max_n = limit->n.max;
891 /* based on hardware requirement, prefer smaller n to precision */
892 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
893 /* based on hardware requirement, prefere larger m1,m2 */
894 for (clock.m1 = limit->m1.max;
895 clock.m1 >= limit->m1.min; clock.m1--) {
896 for (clock.m2 = limit->m2.max;
897 clock.m2 >= limit->m2.min; clock.m2--) {
898 for (clock.p1 = limit->p1.max;
899 clock.p1 >= limit->p1.min; clock.p1--) {
902 i9xx_calc_dpll_params(refclk, &clock);
903 if (!intel_PLL_is_valid(dev, limit,
907 this_err = abs(clock.dot - target);
908 if (this_err < err_most) {
922 * Check if the calculated PLL configuration is more optimal compared to the
923 * best configuration and error found so far. Return the calculated error.
925 static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
926 const intel_clock_t *calculated_clock,
927 const intel_clock_t *best_clock,
928 unsigned int best_error_ppm,
929 unsigned int *error_ppm)
932 * For CHV ignore the error and consider only the P value.
933 * Prefer a bigger P value based on HW requirements.
935 if (IS_CHERRYVIEW(dev)) {
938 return calculated_clock->p > best_clock->p;
941 if (WARN_ON_ONCE(!target_freq))
944 *error_ppm = div_u64(1000000ULL *
945 abs(target_freq - calculated_clock->dot),
948 * Prefer a better P value over a better (smaller) error if the error
949 * is small. Ensure this preference for future configurations too by
950 * setting the error to 0.
952 if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
958 return *error_ppm + 10 < best_error_ppm;
962 vlv_find_best_dpll(const intel_limit_t *limit,
963 struct intel_crtc_state *crtc_state,
964 int target, int refclk, intel_clock_t *match_clock,
965 intel_clock_t *best_clock)
967 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
968 struct drm_device *dev = crtc->base.dev;
970 unsigned int bestppm = 1000000;
971 /* min update 19.2 MHz */
972 int max_n = min(limit->n.max, refclk / 19200);
975 target *= 5; /* fast clock */
977 memset(best_clock, 0, sizeof(*best_clock));
979 /* based on hardware requirement, prefer smaller n to precision */
980 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
981 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
982 for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
983 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
984 clock.p = clock.p1 * clock.p2;
985 /* based on hardware requirement, prefer bigger m1,m2 values */
986 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
989 clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
992 vlv_calc_dpll_params(refclk, &clock);
994 if (!intel_PLL_is_valid(dev, limit,
998 if (!vlv_PLL_is_optimal(dev, target,
1004 *best_clock = clock;
1016 chv_find_best_dpll(const intel_limit_t *limit,
1017 struct intel_crtc_state *crtc_state,
1018 int target, int refclk, intel_clock_t *match_clock,
1019 intel_clock_t *best_clock)
1021 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
1022 struct drm_device *dev = crtc->base.dev;
1023 unsigned int best_error_ppm;
1024 intel_clock_t clock;
1028 memset(best_clock, 0, sizeof(*best_clock));
1029 best_error_ppm = 1000000;
1032 * Based on hardware doc, the n always set to 1, and m1 always
1033 * set to 2. If requires to support 200Mhz refclk, we need to
1034 * revisit this because n may not 1 anymore.
1036 clock.n = 1, clock.m1 = 2;
1037 target *= 5; /* fast clock */
1039 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
1040 for (clock.p2 = limit->p2.p2_fast;
1041 clock.p2 >= limit->p2.p2_slow;
1042 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
1043 unsigned int error_ppm;
1045 clock.p = clock.p1 * clock.p2;
1047 m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p *
1048 clock.n) << 22, refclk * clock.m1);
1050 if (m2 > INT_MAX/clock.m1)
1055 chv_calc_dpll_params(refclk, &clock);
1057 if (!intel_PLL_is_valid(dev, limit, &clock))
1060 if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
1061 best_error_ppm, &error_ppm))
1064 *best_clock = clock;
1065 best_error_ppm = error_ppm;
1073 bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
1074 intel_clock_t *best_clock)
1076 int refclk = i9xx_get_refclk(crtc_state, 0);
1078 return chv_find_best_dpll(intel_limit(crtc_state, refclk), crtc_state,
1079 target_clock, refclk, NULL, best_clock);
1082 bool intel_crtc_active(struct drm_crtc *crtc)
1084 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1086 /* Be paranoid as we can arrive here with only partial
1087 * state retrieved from the hardware during setup.
1089 * We can ditch the adjusted_mode.crtc_clock check as soon
1090 * as Haswell has gained clock readout/fastboot support.
1092 * We can ditch the crtc->primary->fb check as soon as we can
1093 * properly reconstruct framebuffers.
1095 * FIXME: The intel_crtc->active here should be switched to
1096 * crtc->state->active once we have proper CRTC states wired up
1099 return intel_crtc->active && crtc->primary->state->fb &&
1100 intel_crtc->config->base.adjusted_mode.crtc_clock;
1103 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
1106 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1107 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1109 return intel_crtc->config->cpu_transcoder;
1112 static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
1114 struct drm_i915_private *dev_priv = dev->dev_private;
1115 i915_reg_t reg = PIPEDSL(pipe);
1120 line_mask = DSL_LINEMASK_GEN2;
1122 line_mask = DSL_LINEMASK_GEN3;
1124 line1 = I915_READ(reg) & line_mask;
1126 line2 = I915_READ(reg) & line_mask;
1128 return line1 == line2;
1132 * intel_wait_for_pipe_off - wait for pipe to turn off
1133 * @crtc: crtc whose pipe to wait for
1135 * After disabling a pipe, we can't wait for vblank in the usual way,
1136 * spinning on the vblank interrupt status bit, since we won't actually
1137 * see an interrupt when the pipe is disabled.
1139 * On Gen4 and above:
1140 * wait for the pipe register state bit to turn off
1143 * wait for the display line value to settle (it usually
1144 * ends up stopping at the start of the next frame).
1147 static void intel_wait_for_pipe_off(struct intel_crtc *crtc)
1149 struct drm_device *dev = crtc->base.dev;
1150 struct drm_i915_private *dev_priv = dev->dev_private;
1151 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
1152 enum pipe pipe = crtc->pipe;
1154 if (INTEL_INFO(dev)->gen >= 4) {
1155 i915_reg_t reg = PIPECONF(cpu_transcoder);
1157 /* Wait for the Pipe State to go off */
1158 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
1160 WARN(1, "pipe_off wait timed out\n");
1162 /* Wait for the display line to settle */
1163 if (wait_for(pipe_dsl_stopped(dev, pipe), 100))
1164 WARN(1, "pipe_off wait timed out\n");
1168 /* Only for pre-ILK configs */
1169 void assert_pll(struct drm_i915_private *dev_priv,
1170 enum pipe pipe, bool state)
1175 val = I915_READ(DPLL(pipe));
1176 cur_state = !!(val & DPLL_VCO_ENABLE);
1177 I915_STATE_WARN(cur_state != state,
1178 "PLL state assertion failure (expected %s, current %s)\n",
1179 onoff(state), onoff(cur_state));
1182 /* XXX: the dsi pll is shared between MIPI DSI ports */
1183 static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
1188 mutex_lock(&dev_priv->sb_lock);
1189 val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
1190 mutex_unlock(&dev_priv->sb_lock);
1192 cur_state = val & DSI_PLL_VCO_EN;
1193 I915_STATE_WARN(cur_state != state,
1194 "DSI PLL state assertion failure (expected %s, current %s)\n",
1195 onoff(state), onoff(cur_state));
1197 #define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
1198 #define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
1200 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1201 enum pipe pipe, bool state)
1204 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1207 if (HAS_DDI(dev_priv->dev)) {
1208 /* DDI does not have a specific FDI_TX register */
1209 u32 val = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
1210 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1212 u32 val = I915_READ(FDI_TX_CTL(pipe));
1213 cur_state = !!(val & FDI_TX_ENABLE);
1215 I915_STATE_WARN(cur_state != state,
1216 "FDI TX state assertion failure (expected %s, current %s)\n",
1217 onoff(state), onoff(cur_state));
1219 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1220 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1222 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1223 enum pipe pipe, bool state)
1228 val = I915_READ(FDI_RX_CTL(pipe));
1229 cur_state = !!(val & FDI_RX_ENABLE);
1230 I915_STATE_WARN(cur_state != state,
1231 "FDI RX state assertion failure (expected %s, current %s)\n",
1232 onoff(state), onoff(cur_state));
1234 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1235 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1237 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1242 /* ILK FDI PLL is always enabled */
1243 if (INTEL_INFO(dev_priv->dev)->gen == 5)
1246 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1247 if (HAS_DDI(dev_priv->dev))
1250 val = I915_READ(FDI_TX_CTL(pipe));
1251 I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1254 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
1255 enum pipe pipe, bool state)
1260 val = I915_READ(FDI_RX_CTL(pipe));
1261 cur_state = !!(val & FDI_RX_PLL_ENABLE);
1262 I915_STATE_WARN(cur_state != state,
1263 "FDI RX PLL assertion failure (expected %s, current %s)\n",
1264 onoff(state), onoff(cur_state));
1267 void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1270 struct drm_device *dev = dev_priv->dev;
1273 enum pipe panel_pipe = PIPE_A;
1276 if (WARN_ON(HAS_DDI(dev)))
1279 if (HAS_PCH_SPLIT(dev)) {
1282 pp_reg = PCH_PP_CONTROL;
1283 port_sel = I915_READ(PCH_PP_ON_DELAYS) & PANEL_PORT_SELECT_MASK;
1285 if (port_sel == PANEL_PORT_SELECT_LVDS &&
1286 I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
1287 panel_pipe = PIPE_B;
1288 /* XXX: else fix for eDP */
1289 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
1290 /* presumably write lock depends on pipe, not port select */
1291 pp_reg = VLV_PIPE_PP_CONTROL(pipe);
1294 pp_reg = PP_CONTROL;
1295 if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
1296 panel_pipe = PIPE_B;
1299 val = I915_READ(pp_reg);
1300 if (!(val & PANEL_POWER_ON) ||
1301 ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
1304 I915_STATE_WARN(panel_pipe == pipe && locked,
1305 "panel assertion failure, pipe %c regs locked\n",
1309 static void assert_cursor(struct drm_i915_private *dev_priv,
1310 enum pipe pipe, bool state)
1312 struct drm_device *dev = dev_priv->dev;
1315 if (IS_845G(dev) || IS_I865G(dev))
1316 cur_state = I915_READ(CURCNTR(PIPE_A)) & CURSOR_ENABLE;
1318 cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
1320 I915_STATE_WARN(cur_state != state,
1321 "cursor on pipe %c assertion failure (expected %s, current %s)\n",
1322 pipe_name(pipe), onoff(state), onoff(cur_state));
1324 #define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
1325 #define assert_cursor_disabled(d, p) assert_cursor(d, p, false)
1327 void assert_pipe(struct drm_i915_private *dev_priv,
1328 enum pipe pipe, bool state)
1331 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1333 enum intel_display_power_domain power_domain;
1335 /* if we need the pipe quirk it must be always on */
1336 if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
1337 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
1340 power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
1341 if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
1342 u32 val = I915_READ(PIPECONF(cpu_transcoder));
1343 cur_state = !!(val & PIPECONF_ENABLE);
1345 intel_display_power_put(dev_priv, power_domain);
1350 I915_STATE_WARN(cur_state != state,
1351 "pipe %c assertion failure (expected %s, current %s)\n",
1352 pipe_name(pipe), onoff(state), onoff(cur_state));
1355 static void assert_plane(struct drm_i915_private *dev_priv,
1356 enum plane plane, bool state)
1361 val = I915_READ(DSPCNTR(plane));
1362 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1363 I915_STATE_WARN(cur_state != state,
1364 "plane %c assertion failure (expected %s, current %s)\n",
1365 plane_name(plane), onoff(state), onoff(cur_state));
1368 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1369 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1371 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1374 struct drm_device *dev = dev_priv->dev;
1377 /* Primary planes are fixed to pipes on gen4+ */
1378 if (INTEL_INFO(dev)->gen >= 4) {
1379 u32 val = I915_READ(DSPCNTR(pipe));
1380 I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
1381 "plane %c assertion failure, should be disabled but not\n",
1386 /* Need to check both planes against the pipe */
1387 for_each_pipe(dev_priv, i) {
1388 u32 val = I915_READ(DSPCNTR(i));
1389 enum pipe cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1390 DISPPLANE_SEL_PIPE_SHIFT;
1391 I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1392 "plane %c assertion failure, should be off on pipe %c but is still active\n",
1393 plane_name(i), pipe_name(pipe));
1397 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1400 struct drm_device *dev = dev_priv->dev;
1403 if (INTEL_INFO(dev)->gen >= 9) {
1404 for_each_sprite(dev_priv, pipe, sprite) {
1405 u32 val = I915_READ(PLANE_CTL(pipe, sprite));
1406 I915_STATE_WARN(val & PLANE_CTL_ENABLE,
1407 "plane %d assertion failure, should be off on pipe %c but is still active\n",
1408 sprite, pipe_name(pipe));
1410 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
1411 for_each_sprite(dev_priv, pipe, sprite) {
1412 u32 val = I915_READ(SPCNTR(pipe, sprite));
1413 I915_STATE_WARN(val & SP_ENABLE,
1414 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1415 sprite_name(pipe, sprite), pipe_name(pipe));
1417 } else if (INTEL_INFO(dev)->gen >= 7) {
1418 u32 val = I915_READ(SPRCTL(pipe));
1419 I915_STATE_WARN(val & SPRITE_ENABLE,
1420 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1421 plane_name(pipe), pipe_name(pipe));
1422 } else if (INTEL_INFO(dev)->gen >= 5) {
1423 u32 val = I915_READ(DVSCNTR(pipe));
1424 I915_STATE_WARN(val & DVS_ENABLE,
1425 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1426 plane_name(pipe), pipe_name(pipe));
1430 static void assert_vblank_disabled(struct drm_crtc *crtc)
1432 if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
1433 drm_crtc_vblank_put(crtc);
1436 void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1442 val = I915_READ(PCH_TRANSCONF(pipe));
1443 enabled = !!(val & TRANS_ENABLE);
1444 I915_STATE_WARN(enabled,
1445 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1449 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1450 enum pipe pipe, u32 port_sel, u32 val)
1452 if ((val & DP_PORT_EN) == 0)
1455 if (HAS_PCH_CPT(dev_priv->dev)) {
1456 u32 trans_dp_ctl = I915_READ(TRANS_DP_CTL(pipe));
1457 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1459 } else if (IS_CHERRYVIEW(dev_priv->dev)) {
1460 if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe))
1463 if ((val & DP_PIPE_MASK) != (pipe << 30))
1469 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1470 enum pipe pipe, u32 val)
1472 if ((val & SDVO_ENABLE) == 0)
1475 if (HAS_PCH_CPT(dev_priv->dev)) {
1476 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1478 } else if (IS_CHERRYVIEW(dev_priv->dev)) {
1479 if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe))
1482 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1488 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1489 enum pipe pipe, u32 val)
1491 if ((val & LVDS_PORT_EN) == 0)
1494 if (HAS_PCH_CPT(dev_priv->dev)) {
1495 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1498 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1504 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1505 enum pipe pipe, u32 val)
1507 if ((val & ADPA_DAC_ENABLE) == 0)
1509 if (HAS_PCH_CPT(dev_priv->dev)) {
1510 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1513 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1519 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1520 enum pipe pipe, i915_reg_t reg,
1523 u32 val = I915_READ(reg);
1524 I915_STATE_WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1525 "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1526 i915_mmio_reg_offset(reg), pipe_name(pipe));
1528 I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
1529 && (val & DP_PIPEB_SELECT),
1530 "IBX PCH dp port still using transcoder B\n");
1533 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1534 enum pipe pipe, i915_reg_t reg)
1536 u32 val = I915_READ(reg);
1537 I915_STATE_WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1538 "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1539 i915_mmio_reg_offset(reg), pipe_name(pipe));
1541 I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
1542 && (val & SDVO_PIPE_B_SELECT),
1543 "IBX PCH hdmi port still using transcoder B\n");
1546 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1551 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1552 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1553 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1555 val = I915_READ(PCH_ADPA);
1556 I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1557 "PCH VGA enabled on transcoder %c, should be disabled\n",
1560 val = I915_READ(PCH_LVDS);
1561 I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1562 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1565 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1566 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1567 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1570 static void vlv_enable_pll(struct intel_crtc *crtc,
1571 const struct intel_crtc_state *pipe_config)
1573 struct drm_device *dev = crtc->base.dev;
1574 struct drm_i915_private *dev_priv = dev->dev_private;
1575 i915_reg_t reg = DPLL(crtc->pipe);
1576 u32 dpll = pipe_config->dpll_hw_state.dpll;
1578 assert_pipe_disabled(dev_priv, crtc->pipe);
1580 /* PLL is protected by panel, make sure we can write it */
1581 if (IS_MOBILE(dev_priv->dev))
1582 assert_panel_unlocked(dev_priv, crtc->pipe);
1584 I915_WRITE(reg, dpll);
1588 if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1589 DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);
1591 I915_WRITE(DPLL_MD(crtc->pipe), pipe_config->dpll_hw_state.dpll_md);
1592 POSTING_READ(DPLL_MD(crtc->pipe));
1594 /* We do this three times for luck */
1595 I915_WRITE(reg, dpll);
1597 udelay(150); /* wait for warmup */
1598 I915_WRITE(reg, dpll);
1600 udelay(150); /* wait for warmup */
1601 I915_WRITE(reg, dpll);
1603 udelay(150); /* wait for warmup */
1606 static void chv_enable_pll(struct intel_crtc *crtc,
1607 const struct intel_crtc_state *pipe_config)
1609 struct drm_device *dev = crtc->base.dev;
1610 struct drm_i915_private *dev_priv = dev->dev_private;
1611 int pipe = crtc->pipe;
1612 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1615 assert_pipe_disabled(dev_priv, crtc->pipe);
1617 mutex_lock(&dev_priv->sb_lock);
1619 /* Enable back the 10bit clock to display controller */
1620 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1621 tmp |= DPIO_DCLKP_EN;
1622 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
1624 mutex_unlock(&dev_priv->sb_lock);
1627 * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
1632 I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1634 /* Check PLL is locked */
1635 if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1636 DRM_ERROR("PLL %d failed to lock\n", pipe);
1638 /* not sure when this should be written */
1639 I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1640 POSTING_READ(DPLL_MD(pipe));
1643 static int intel_num_dvo_pipes(struct drm_device *dev)
1645 struct intel_crtc *crtc;
1648 for_each_intel_crtc(dev, crtc)
1649 count += crtc->base.state->active &&
1650 intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
1655 static void i9xx_enable_pll(struct intel_crtc *crtc)
1657 struct drm_device *dev = crtc->base.dev;
1658 struct drm_i915_private *dev_priv = dev->dev_private;
1659 i915_reg_t reg = DPLL(crtc->pipe);
1660 u32 dpll = crtc->config->dpll_hw_state.dpll;
1662 assert_pipe_disabled(dev_priv, crtc->pipe);
1664 /* No really, not for ILK+ */
1665 BUG_ON(INTEL_INFO(dev)->gen >= 5);
1667 /* PLL is protected by panel, make sure we can write it */
1668 if (IS_MOBILE(dev) && !IS_I830(dev))
1669 assert_panel_unlocked(dev_priv, crtc->pipe);
1671 /* Enable DVO 2x clock on both PLLs if necessary */
1672 if (IS_I830(dev) && intel_num_dvo_pipes(dev) > 0) {
1674 * It appears to be important that we don't enable this
1675 * for the current pipe before otherwise configuring the
1676 * PLL. No idea how this should be handled if multiple
1677 * DVO outputs are enabled simultaneosly.
1679 dpll |= DPLL_DVO_2X_MODE;
1680 I915_WRITE(DPLL(!crtc->pipe),
1681 I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
1685 * Apparently we need to have VGA mode enabled prior to changing
1686 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
1687 * dividers, even though the register value does change.
1691 I915_WRITE(reg, dpll);
1693 /* Wait for the clocks to stabilize. */
1697 if (INTEL_INFO(dev)->gen >= 4) {
1698 I915_WRITE(DPLL_MD(crtc->pipe),
1699 crtc->config->dpll_hw_state.dpll_md);
1701 /* The pixel multiplier can only be updated once the
1702 * DPLL is enabled and the clocks are stable.
1704 * So write it again.
1706 I915_WRITE(reg, dpll);
1709 /* We do this three times for luck */
1710 I915_WRITE(reg, dpll);
1712 udelay(150); /* wait for warmup */
1713 I915_WRITE(reg, dpll);
1715 udelay(150); /* wait for warmup */
1716 I915_WRITE(reg, dpll);
1718 udelay(150); /* wait for warmup */
1722 * i9xx_disable_pll - disable a PLL
1723 * @dev_priv: i915 private structure
1724 * @pipe: pipe PLL to disable
1726 * Disable the PLL for @pipe, making sure the pipe is off first.
1728 * Note! This is for pre-ILK only.
1730 static void i9xx_disable_pll(struct intel_crtc *crtc)
1732 struct drm_device *dev = crtc->base.dev;
1733 struct drm_i915_private *dev_priv = dev->dev_private;
1734 enum pipe pipe = crtc->pipe;
1736 /* Disable DVO 2x clock on both PLLs if necessary */
1738 intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
1739 !intel_num_dvo_pipes(dev)) {
1740 I915_WRITE(DPLL(PIPE_B),
1741 I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
1742 I915_WRITE(DPLL(PIPE_A),
1743 I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE);
1746 /* Don't disable pipe or pipe PLLs if needed */
1747 if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
1748 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
1751 /* Make sure the pipe isn't still relying on us */
1752 assert_pipe_disabled(dev_priv, pipe);
1754 I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
1755 POSTING_READ(DPLL(pipe));
1758 static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1762 /* Make sure the pipe isn't still relying on us */
1763 assert_pipe_disabled(dev_priv, pipe);
1766 * Leave integrated clock source and reference clock enabled for pipe B.
1767 * The latter is needed for VGA hotplug / manual detection.
1769 val = DPLL_VGA_MODE_DIS;
1771 val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REF_CLK_ENABLE_VLV;
1772 I915_WRITE(DPLL(pipe), val);
1773 POSTING_READ(DPLL(pipe));
1777 static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1779 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1782 /* Make sure the pipe isn't still relying on us */
1783 assert_pipe_disabled(dev_priv, pipe);
1785 /* Set PLL en = 0 */
1786 val = DPLL_SSC_REF_CLK_CHV |
1787 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
1789 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1790 I915_WRITE(DPLL(pipe), val);
1791 POSTING_READ(DPLL(pipe));
1793 mutex_lock(&dev_priv->sb_lock);
1795 /* Disable 10bit clock to display controller */
1796 val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1797 val &= ~DPIO_DCLKP_EN;
1798 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
1800 mutex_unlock(&dev_priv->sb_lock);
1803 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
1804 struct intel_digital_port *dport,
1805 unsigned int expected_mask)
1808 i915_reg_t dpll_reg;
1810 switch (dport->port) {
1812 port_mask = DPLL_PORTB_READY_MASK;
1816 port_mask = DPLL_PORTC_READY_MASK;
1818 expected_mask <<= 4;
1821 port_mask = DPLL_PORTD_READY_MASK;
1822 dpll_reg = DPIO_PHY_STATUS;
1828 if (wait_for((I915_READ(dpll_reg) & port_mask) == expected_mask, 1000))
1829 WARN(1, "timed out waiting for port %c ready: got 0x%x, expected 0x%x\n",
1830 port_name(dport->port), I915_READ(dpll_reg) & port_mask, expected_mask);
1833 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1836 struct drm_device *dev = dev_priv->dev;
1837 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1838 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1840 uint32_t val, pipeconf_val;
1842 /* PCH only available on ILK+ */
1843 BUG_ON(!HAS_PCH_SPLIT(dev));
1845 /* Make sure PCH DPLL is enabled */
1846 assert_shared_dpll_enabled(dev_priv, intel_crtc->config->shared_dpll);
1848 /* FDI must be feeding us bits for PCH ports */
1849 assert_fdi_tx_enabled(dev_priv, pipe);
1850 assert_fdi_rx_enabled(dev_priv, pipe);
1852 if (HAS_PCH_CPT(dev)) {
1853 /* Workaround: Set the timing override bit before enabling the
1854 * pch transcoder. */
1855 reg = TRANS_CHICKEN2(pipe);
1856 val = I915_READ(reg);
1857 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1858 I915_WRITE(reg, val);
1861 reg = PCH_TRANSCONF(pipe);
1862 val = I915_READ(reg);
1863 pipeconf_val = I915_READ(PIPECONF(pipe));
1865 if (HAS_PCH_IBX(dev_priv->dev)) {
1867 * Make the BPC in transcoder be consistent with
1868 * that in pipeconf reg. For HDMI we must use 8bpc
1869 * here for both 8bpc and 12bpc.
1871 val &= ~PIPECONF_BPC_MASK;
1872 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_HDMI))
1873 val |= PIPECONF_8BPC;
1875 val |= pipeconf_val & PIPECONF_BPC_MASK;
1878 val &= ~TRANS_INTERLACE_MASK;
1879 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1880 if (HAS_PCH_IBX(dev_priv->dev) &&
1881 intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
1882 val |= TRANS_LEGACY_INTERLACED_ILK;
1884 val |= TRANS_INTERLACED;
1886 val |= TRANS_PROGRESSIVE;
1888 I915_WRITE(reg, val | TRANS_ENABLE);
1889 if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1890 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
1893 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1894 enum transcoder cpu_transcoder)
1896 u32 val, pipeconf_val;
1898 /* PCH only available on ILK+ */
1899 BUG_ON(!HAS_PCH_SPLIT(dev_priv->dev));
1901 /* FDI must be feeding us bits for PCH ports */
1902 assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1903 assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
1905 /* Workaround: set timing override bit. */
1906 val = I915_READ(TRANS_CHICKEN2(PIPE_A));
1907 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1908 I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
1911 pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1913 if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1914 PIPECONF_INTERLACED_ILK)
1915 val |= TRANS_INTERLACED;
1917 val |= TRANS_PROGRESSIVE;
1919 I915_WRITE(LPT_TRANSCONF, val);
1920 if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
1921 DRM_ERROR("Failed to enable PCH transcoder\n");
1924 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1927 struct drm_device *dev = dev_priv->dev;
1931 /* FDI relies on the transcoder */
1932 assert_fdi_tx_disabled(dev_priv, pipe);
1933 assert_fdi_rx_disabled(dev_priv, pipe);
1935 /* Ports must be off as well */
1936 assert_pch_ports_disabled(dev_priv, pipe);
1938 reg = PCH_TRANSCONF(pipe);
1939 val = I915_READ(reg);
1940 val &= ~TRANS_ENABLE;
1941 I915_WRITE(reg, val);
1942 /* wait for PCH transcoder off, transcoder state */
1943 if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1944 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
1946 if (HAS_PCH_CPT(dev)) {
1947 /* Workaround: Clear the timing override chicken bit again. */
1948 reg = TRANS_CHICKEN2(pipe);
1949 val = I915_READ(reg);
1950 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1951 I915_WRITE(reg, val);
1955 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1959 val = I915_READ(LPT_TRANSCONF);
1960 val &= ~TRANS_ENABLE;
1961 I915_WRITE(LPT_TRANSCONF, val);
1962 /* wait for PCH transcoder off, transcoder state */
1963 if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
1964 DRM_ERROR("Failed to disable PCH transcoder\n");
1966 /* Workaround: clear timing override bit. */
1967 val = I915_READ(TRANS_CHICKEN2(PIPE_A));
1968 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1969 I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
1973 * intel_enable_pipe - enable a pipe, asserting requirements
1974 * @crtc: crtc responsible for the pipe
1976 * Enable @crtc's pipe, making sure that various hardware specific requirements
1977 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1979 static void intel_enable_pipe(struct intel_crtc *crtc)
1981 struct drm_device *dev = crtc->base.dev;
1982 struct drm_i915_private *dev_priv = dev->dev_private;
1983 enum pipe pipe = crtc->pipe;
1984 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
1985 enum pipe pch_transcoder;
1989 DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe));
1991 assert_planes_disabled(dev_priv, pipe);
1992 assert_cursor_disabled(dev_priv, pipe);
1993 assert_sprites_disabled(dev_priv, pipe);
1995 if (HAS_PCH_LPT(dev_priv->dev))
1996 pch_transcoder = TRANSCODER_A;
1998 pch_transcoder = pipe;
2001 * A pipe without a PLL won't actually be able to drive bits from
2002 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
2005 if (HAS_GMCH_DISPLAY(dev_priv->dev))
2006 if (crtc->config->has_dsi_encoder)
2007 assert_dsi_pll_enabled(dev_priv);
2009 assert_pll_enabled(dev_priv, pipe);
2011 if (crtc->config->has_pch_encoder) {
2012 /* if driving the PCH, we need FDI enabled */
2013 assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
2014 assert_fdi_tx_pll_enabled(dev_priv,
2015 (enum pipe) cpu_transcoder);
2017 /* FIXME: assert CPU port conditions for SNB+ */
2020 reg = PIPECONF(cpu_transcoder);
2021 val = I915_READ(reg);
2022 if (val & PIPECONF_ENABLE) {
2023 WARN_ON(!((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
2024 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)));
2028 I915_WRITE(reg, val | PIPECONF_ENABLE);
2032 * Until the pipe starts DSL will read as 0, which would cause
2033 * an apparent vblank timestamp jump, which messes up also the
2034 * frame count when it's derived from the timestamps. So let's
2035 * wait for the pipe to start properly before we call
2036 * drm_crtc_vblank_on()
2038 if (dev->max_vblank_count == 0 &&
2039 wait_for(intel_get_crtc_scanline(crtc) != crtc->scanline_offset, 50))
2040 DRM_ERROR("pipe %c didn't start\n", pipe_name(pipe));
2044 * intel_disable_pipe - disable a pipe, asserting requirements
2045 * @crtc: crtc whose pipes is to be disabled
2047 * Disable the pipe of @crtc, making sure that various hardware
2048 * specific requirements are met, if applicable, e.g. plane
2049 * disabled, panel fitter off, etc.
2051 * Will wait until the pipe has shut down before returning.
2053 static void intel_disable_pipe(struct intel_crtc *crtc)
2055 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
2056 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
2057 enum pipe pipe = crtc->pipe;
2061 DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe));
2064 * Make sure planes won't keep trying to pump pixels to us,
2065 * or we might hang the display.
2067 assert_planes_disabled(dev_priv, pipe);
2068 assert_cursor_disabled(dev_priv, pipe);
2069 assert_sprites_disabled(dev_priv, pipe);
2071 reg = PIPECONF(cpu_transcoder);
2072 val = I915_READ(reg);
2073 if ((val & PIPECONF_ENABLE) == 0)
2077 * Double wide has implications for planes
2078 * so best keep it disabled when not needed.
2080 if (crtc->config->double_wide)
2081 val &= ~PIPECONF_DOUBLE_WIDE;
2083 /* Don't disable pipe or pipe PLLs if needed */
2084 if (!(pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) &&
2085 !(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
2086 val &= ~PIPECONF_ENABLE;
2088 I915_WRITE(reg, val);
2089 if ((val & PIPECONF_ENABLE) == 0)
2090 intel_wait_for_pipe_off(crtc);
2093 static bool need_vtd_wa(struct drm_device *dev)
2095 #ifdef CONFIG_INTEL_IOMMU
2096 if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
2102 static unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
2104 return IS_GEN2(dev_priv) ? 2048 : 4096;
2107 static unsigned int intel_tile_width_bytes(const struct drm_i915_private *dev_priv,
2108 uint64_t fb_modifier, unsigned int cpp)
2110 switch (fb_modifier) {
2111 case DRM_FORMAT_MOD_NONE:
2113 case I915_FORMAT_MOD_X_TILED:
2114 if (IS_GEN2(dev_priv))
2118 case I915_FORMAT_MOD_Y_TILED:
2119 if (IS_GEN2(dev_priv) || HAS_128_BYTE_Y_TILING(dev_priv))
2123 case I915_FORMAT_MOD_Yf_TILED:
2139 MISSING_CASE(fb_modifier);
2144 unsigned int intel_tile_height(const struct drm_i915_private *dev_priv,
2145 uint64_t fb_modifier, unsigned int cpp)
2147 if (fb_modifier == DRM_FORMAT_MOD_NONE)
2150 return intel_tile_size(dev_priv) /
2151 intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
2154 /* Return the tile dimensions in pixel units */
2155 static void intel_tile_dims(const struct drm_i915_private *dev_priv,
2156 unsigned int *tile_width,
2157 unsigned int *tile_height,
2158 uint64_t fb_modifier,
2161 unsigned int tile_width_bytes =
2162 intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
2164 *tile_width = tile_width_bytes / cpp;
2165 *tile_height = intel_tile_size(dev_priv) / tile_width_bytes;
2169 intel_fb_align_height(struct drm_device *dev, unsigned int height,
2170 uint32_t pixel_format, uint64_t fb_modifier)
2172 unsigned int cpp = drm_format_plane_cpp(pixel_format, 0);
2173 unsigned int tile_height = intel_tile_height(to_i915(dev), fb_modifier, cpp);
2175 return ALIGN(height, tile_height);
2178 unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info)
2180 unsigned int size = 0;
2183 for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++)
2184 size += rot_info->plane[i].width * rot_info->plane[i].height;
2190 intel_fill_fb_ggtt_view(struct i915_ggtt_view *view,
2191 const struct drm_framebuffer *fb,
2192 unsigned int rotation)
2194 if (intel_rotation_90_or_270(rotation)) {
2195 *view = i915_ggtt_view_rotated;
2196 view->params.rotated = to_intel_framebuffer(fb)->rot_info;
2198 *view = i915_ggtt_view_normal;
2203 intel_fill_fb_info(struct drm_i915_private *dev_priv,
2204 struct drm_framebuffer *fb)
2206 struct intel_rotation_info *info = &to_intel_framebuffer(fb)->rot_info;
2207 unsigned int tile_size, tile_width, tile_height, cpp;
2209 tile_size = intel_tile_size(dev_priv);
2211 cpp = drm_format_plane_cpp(fb->pixel_format, 0);
2212 intel_tile_dims(dev_priv, &tile_width, &tile_height,
2213 fb->modifier[0], cpp);
2215 info->plane[0].width = DIV_ROUND_UP(fb->pitches[0], tile_width * cpp);
2216 info->plane[0].height = DIV_ROUND_UP(fb->height, tile_height);
2218 if (info->pixel_format == DRM_FORMAT_NV12) {
2219 cpp = drm_format_plane_cpp(fb->pixel_format, 1);
2220 intel_tile_dims(dev_priv, &tile_width, &tile_height,
2221 fb->modifier[1], cpp);
2223 info->uv_offset = fb->offsets[1];
2224 info->plane[1].width = DIV_ROUND_UP(fb->pitches[1], tile_width * cpp);
2225 info->plane[1].height = DIV_ROUND_UP(fb->height / 2, tile_height);
2229 static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_priv)
2231 if (INTEL_INFO(dev_priv)->gen >= 9)
2233 else if (IS_BROADWATER(dev_priv) || IS_CRESTLINE(dev_priv) ||
2234 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2236 else if (INTEL_INFO(dev_priv)->gen >= 4)
2242 static unsigned int intel_surf_alignment(const struct drm_i915_private *dev_priv,
2243 uint64_t fb_modifier)
2245 switch (fb_modifier) {
2246 case DRM_FORMAT_MOD_NONE:
2247 return intel_linear_alignment(dev_priv);
2248 case I915_FORMAT_MOD_X_TILED:
2249 if (INTEL_INFO(dev_priv)->gen >= 9)
2252 case I915_FORMAT_MOD_Y_TILED:
2253 case I915_FORMAT_MOD_Yf_TILED:
2254 return 1 * 1024 * 1024;
2256 MISSING_CASE(fb_modifier);
2262 intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,
2263 unsigned int rotation)
2265 struct drm_device *dev = fb->dev;
2266 struct drm_i915_private *dev_priv = dev->dev_private;
2267 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2268 struct i915_ggtt_view view;
2272 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
2274 alignment = intel_surf_alignment(dev_priv, fb->modifier[0]);
2276 intel_fill_fb_ggtt_view(&view, fb, rotation);
2278 /* Note that the w/a also requires 64 PTE of padding following the
2279 * bo. We currently fill all unused PTE with the shadow page and so
2280 * we should always have valid PTE following the scanout preventing
2283 if (need_vtd_wa(dev) && alignment < 256 * 1024)
2284 alignment = 256 * 1024;
2287 * Global gtt pte registers are special registers which actually forward
2288 * writes to a chunk of system memory. Which means that there is no risk
2289 * that the register values disappear as soon as we call
2290 * intel_runtime_pm_put(), so it is correct to wrap only the
2291 * pin/unpin/fence and not more.
2293 intel_runtime_pm_get(dev_priv);
2295 ret = i915_gem_object_pin_to_display_plane(obj, alignment,
2300 /* Install a fence for tiled scan-out. Pre-i965 always needs a
2301 * fence, whereas 965+ only requires a fence if using
2302 * framebuffer compression. For simplicity, we always install
2303 * a fence as the cost is not that onerous.
2305 if (view.type == I915_GGTT_VIEW_NORMAL) {
2306 ret = i915_gem_object_get_fence(obj);
2307 if (ret == -EDEADLK) {
2309 * -EDEADLK means there are no free fences
2312 * This is propagated to atomic, but it uses
2313 * -EDEADLK to force a locking recovery, so
2314 * change the returned error to -EBUSY.
2321 i915_gem_object_pin_fence(obj);
2324 intel_runtime_pm_put(dev_priv);
2328 i915_gem_object_unpin_from_display_plane(obj, &view);
2330 intel_runtime_pm_put(dev_priv);
2334 static void intel_unpin_fb_obj(struct drm_framebuffer *fb, unsigned int rotation)
2336 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2337 struct i915_ggtt_view view;
2339 WARN_ON(!mutex_is_locked(&obj->base.dev->struct_mutex));
2341 intel_fill_fb_ggtt_view(&view, fb, rotation);
2343 if (view.type == I915_GGTT_VIEW_NORMAL)
2344 i915_gem_object_unpin_fence(obj);
2346 i915_gem_object_unpin_from_display_plane(obj, &view);
2350 * Adjust the tile offset by moving the difference into
2353 * Input tile dimensions and pitch must already be
2354 * rotated to match x and y, and in pixel units.
2356 static u32 intel_adjust_tile_offset(int *x, int *y,
2357 unsigned int tile_width,
2358 unsigned int tile_height,
2359 unsigned int tile_size,
2360 unsigned int pitch_tiles,
2366 WARN_ON(old_offset & (tile_size - 1));
2367 WARN_ON(new_offset & (tile_size - 1));
2368 WARN_ON(new_offset > old_offset);
2370 tiles = (old_offset - new_offset) / tile_size;
2372 *y += tiles / pitch_tiles * tile_height;
2373 *x += tiles % pitch_tiles * tile_width;
2379 * Computes the linear offset to the base tile and adjusts
2380 * x, y. bytes per pixel is assumed to be a power-of-two.
2382 * In the 90/270 rotated case, x and y are assumed
2383 * to be already rotated to match the rotated GTT view, and
2384 * pitch is the tile_height aligned framebuffer height.
2386 u32 intel_compute_tile_offset(int *x, int *y,
2387 const struct drm_framebuffer *fb, int plane,
2389 unsigned int rotation)
2391 const struct drm_i915_private *dev_priv = to_i915(fb->dev);
2392 uint64_t fb_modifier = fb->modifier[plane];
2393 unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
2394 u32 offset, offset_aligned, alignment;
2396 alignment = intel_surf_alignment(dev_priv, fb_modifier);
2400 if (fb_modifier != DRM_FORMAT_MOD_NONE) {
2401 unsigned int tile_size, tile_width, tile_height;
2402 unsigned int tile_rows, tiles, pitch_tiles;
2404 tile_size = intel_tile_size(dev_priv);
2405 intel_tile_dims(dev_priv, &tile_width, &tile_height,
2408 if (intel_rotation_90_or_270(rotation)) {
2409 pitch_tiles = pitch / tile_height;
2410 swap(tile_width, tile_height);
2412 pitch_tiles = pitch / (tile_width * cpp);
2415 tile_rows = *y / tile_height;
2418 tiles = *x / tile_width;
2421 offset = (tile_rows * pitch_tiles + tiles) * tile_size;
2422 offset_aligned = offset & ~alignment;
2424 intel_adjust_tile_offset(x, y, tile_width, tile_height,
2425 tile_size, pitch_tiles,
2426 offset, offset_aligned);
2428 offset = *y * pitch + *x * cpp;
2429 offset_aligned = offset & ~alignment;
2431 *y = (offset & alignment) / pitch;
2432 *x = ((offset & alignment) - *y * pitch) / cpp;
2435 return offset_aligned;
2438 static int i9xx_format_to_fourcc(int format)
2441 case DISPPLANE_8BPP:
2442 return DRM_FORMAT_C8;
2443 case DISPPLANE_BGRX555:
2444 return DRM_FORMAT_XRGB1555;
2445 case DISPPLANE_BGRX565:
2446 return DRM_FORMAT_RGB565;
2448 case DISPPLANE_BGRX888:
2449 return DRM_FORMAT_XRGB8888;
2450 case DISPPLANE_RGBX888:
2451 return DRM_FORMAT_XBGR8888;
2452 case DISPPLANE_BGRX101010:
2453 return DRM_FORMAT_XRGB2101010;
2454 case DISPPLANE_RGBX101010:
2455 return DRM_FORMAT_XBGR2101010;
2459 static int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
2462 case PLANE_CTL_FORMAT_RGB_565:
2463 return DRM_FORMAT_RGB565;
2465 case PLANE_CTL_FORMAT_XRGB_8888:
2468 return DRM_FORMAT_ABGR8888;
2470 return DRM_FORMAT_XBGR8888;
2473 return DRM_FORMAT_ARGB8888;
2475 return DRM_FORMAT_XRGB8888;
2477 case PLANE_CTL_FORMAT_XRGB_2101010:
2479 return DRM_FORMAT_XBGR2101010;
2481 return DRM_FORMAT_XRGB2101010;
2486 intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
2487 struct intel_initial_plane_config *plane_config)
2489 struct drm_device *dev = crtc->base.dev;
2490 struct drm_i915_private *dev_priv = to_i915(dev);
2491 struct drm_i915_gem_object *obj = NULL;
2492 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
2493 struct drm_framebuffer *fb = &plane_config->fb->base;
2494 u32 base_aligned = round_down(plane_config->base, PAGE_SIZE);
2495 u32 size_aligned = round_up(plane_config->base + plane_config->size,
2498 size_aligned -= base_aligned;
2500 if (plane_config->size == 0)
2503 /* If the FB is too big, just don't use it since fbdev is not very
2504 * important and we should probably use that space with FBC or other
2506 if (size_aligned * 2 > dev_priv->gtt.stolen_usable_size)
2509 mutex_lock(&dev->struct_mutex);
2511 obj = i915_gem_object_create_stolen_for_preallocated(dev,
2516 mutex_unlock(&dev->struct_mutex);
2520 obj->tiling_mode = plane_config->tiling;
2521 if (obj->tiling_mode == I915_TILING_X)
2522 obj->stride = fb->pitches[0];
2524 mode_cmd.pixel_format = fb->pixel_format;
2525 mode_cmd.width = fb->width;
2526 mode_cmd.height = fb->height;
2527 mode_cmd.pitches[0] = fb->pitches[0];
2528 mode_cmd.modifier[0] = fb->modifier[0];
2529 mode_cmd.flags = DRM_MODE_FB_MODIFIERS;
2531 if (intel_framebuffer_init(dev, to_intel_framebuffer(fb),
2533 DRM_DEBUG_KMS("intel fb init failed\n");
2537 mutex_unlock(&dev->struct_mutex);
2539 DRM_DEBUG_KMS("initial plane fb obj %p\n", obj);
2543 drm_gem_object_unreference(&obj->base);
2544 mutex_unlock(&dev->struct_mutex);
2548 /* Update plane->state->fb to match plane->fb after driver-internal updates */
2550 update_state_fb(struct drm_plane *plane)
2552 if (plane->fb == plane->state->fb)
2555 if (plane->state->fb)
2556 drm_framebuffer_unreference(plane->state->fb);
2557 plane->state->fb = plane->fb;
2558 if (plane->state->fb)
2559 drm_framebuffer_reference(plane->state->fb);
2563 intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
2564 struct intel_initial_plane_config *plane_config)
2566 struct drm_device *dev = intel_crtc->base.dev;
2567 struct drm_i915_private *dev_priv = dev->dev_private;
2569 struct intel_crtc *i;
2570 struct drm_i915_gem_object *obj;
2571 struct drm_plane *primary = intel_crtc->base.primary;
2572 struct drm_plane_state *plane_state = primary->state;
2573 struct drm_crtc_state *crtc_state = intel_crtc->base.state;
2574 struct intel_plane *intel_plane = to_intel_plane(primary);
2575 struct intel_plane_state *intel_state =
2576 to_intel_plane_state(plane_state);
2577 struct drm_framebuffer *fb;
2579 if (!plane_config->fb)
2582 if (intel_alloc_initial_plane_obj(intel_crtc, plane_config)) {
2583 fb = &plane_config->fb->base;
2587 kfree(plane_config->fb);
2590 * Failed to alloc the obj, check to see if we should share
2591 * an fb with another CRTC instead
2593 for_each_crtc(dev, c) {
2594 i = to_intel_crtc(c);
2596 if (c == &intel_crtc->base)
2602 fb = c->primary->fb;
2606 obj = intel_fb_obj(fb);
2607 if (i915_gem_obj_ggtt_offset(obj) == plane_config->base) {
2608 drm_framebuffer_reference(fb);
2614 * We've failed to reconstruct the BIOS FB. Current display state
2615 * indicates that the primary plane is visible, but has a NULL FB,
2616 * which will lead to problems later if we don't fix it up. The
2617 * simplest solution is to just disable the primary plane now and
2618 * pretend the BIOS never had it enabled.
2620 to_intel_plane_state(plane_state)->visible = false;
2621 crtc_state->plane_mask &= ~(1 << drm_plane_index(primary));
2622 intel_pre_disable_primary_noatomic(&intel_crtc->base);
2623 intel_plane->disable_plane(primary, &intel_crtc->base);
2628 plane_state->src_x = 0;
2629 plane_state->src_y = 0;
2630 plane_state->src_w = fb->width << 16;
2631 plane_state->src_h = fb->height << 16;
2633 plane_state->crtc_x = 0;
2634 plane_state->crtc_y = 0;
2635 plane_state->crtc_w = fb->width;
2636 plane_state->crtc_h = fb->height;
2638 intel_state->src.x1 = plane_state->src_x;
2639 intel_state->src.y1 = plane_state->src_y;
2640 intel_state->src.x2 = plane_state->src_x + plane_state->src_w;
2641 intel_state->src.y2 = plane_state->src_y + plane_state->src_h;
2642 intel_state->dst.x1 = plane_state->crtc_x;
2643 intel_state->dst.y1 = plane_state->crtc_y;
2644 intel_state->dst.x2 = plane_state->crtc_x + plane_state->crtc_w;
2645 intel_state->dst.y2 = plane_state->crtc_y + plane_state->crtc_h;
2647 obj = intel_fb_obj(fb);
2648 if (obj->tiling_mode != I915_TILING_NONE)
2649 dev_priv->preserve_bios_swizzle = true;
2651 drm_framebuffer_reference(fb);
2652 primary->fb = primary->state->fb = fb;
2653 primary->crtc = primary->state->crtc = &intel_crtc->base;
2654 intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
2655 obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bit;
2658 static void i9xx_update_primary_plane(struct drm_plane *primary,
2659 const struct intel_crtc_state *crtc_state,
2660 const struct intel_plane_state *plane_state)
2662 struct drm_device *dev = primary->dev;
2663 struct drm_i915_private *dev_priv = dev->dev_private;
2664 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
2665 struct drm_framebuffer *fb = plane_state->base.fb;
2666 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2667 int plane = intel_crtc->plane;
2670 i915_reg_t reg = DSPCNTR(plane);
2671 unsigned int rotation = plane_state->base.rotation;
2672 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
2673 int x = plane_state->src.x1 >> 16;
2674 int y = plane_state->src.y1 >> 16;
2676 dspcntr = DISPPLANE_GAMMA_ENABLE;
2678 dspcntr |= DISPLAY_PLANE_ENABLE;
2680 if (INTEL_INFO(dev)->gen < 4) {
2681 if (intel_crtc->pipe == PIPE_B)
2682 dspcntr |= DISPPLANE_SEL_PIPE_B;
2684 /* pipesrc and dspsize control the size that is scaled from,
2685 * which should always be the user's requested size.
2687 I915_WRITE(DSPSIZE(plane),
2688 ((crtc_state->pipe_src_h - 1) << 16) |
2689 (crtc_state->pipe_src_w - 1));
2690 I915_WRITE(DSPPOS(plane), 0);
2691 } else if (IS_CHERRYVIEW(dev) && plane == PLANE_B) {
2692 I915_WRITE(PRIMSIZE(plane),
2693 ((crtc_state->pipe_src_h - 1) << 16) |
2694 (crtc_state->pipe_src_w - 1));
2695 I915_WRITE(PRIMPOS(plane), 0);
2696 I915_WRITE(PRIMCNSTALPHA(plane), 0);
2699 switch (fb->pixel_format) {
2701 dspcntr |= DISPPLANE_8BPP;
2703 case DRM_FORMAT_XRGB1555:
2704 dspcntr |= DISPPLANE_BGRX555;
2706 case DRM_FORMAT_RGB565:
2707 dspcntr |= DISPPLANE_BGRX565;
2709 case DRM_FORMAT_XRGB8888:
2710 dspcntr |= DISPPLANE_BGRX888;
2712 case DRM_FORMAT_XBGR8888:
2713 dspcntr |= DISPPLANE_RGBX888;
2715 case DRM_FORMAT_XRGB2101010:
2716 dspcntr |= DISPPLANE_BGRX101010;
2718 case DRM_FORMAT_XBGR2101010:
2719 dspcntr |= DISPPLANE_RGBX101010;
2725 if (INTEL_INFO(dev)->gen >= 4 &&
2726 obj->tiling_mode != I915_TILING_NONE)
2727 dspcntr |= DISPPLANE_TILED;
2730 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2732 linear_offset = y * fb->pitches[0] + x * cpp;
2734 if (INTEL_INFO(dev)->gen >= 4) {
2735 intel_crtc->dspaddr_offset =
2736 intel_compute_tile_offset(&x, &y, fb, 0,
2737 fb->pitches[0], rotation);
2738 linear_offset -= intel_crtc->dspaddr_offset;
2740 intel_crtc->dspaddr_offset = linear_offset;
2743 if (rotation == BIT(DRM_ROTATE_180)) {
2744 dspcntr |= DISPPLANE_ROTATE_180;
2746 x += (crtc_state->pipe_src_w - 1);
2747 y += (crtc_state->pipe_src_h - 1);
2749 /* Finding the last pixel of the last line of the display
2750 data and adding to linear_offset*/
2752 (crtc_state->pipe_src_h - 1) * fb->pitches[0] +
2753 (crtc_state->pipe_src_w - 1) * cpp;
2756 intel_crtc->adjusted_x = x;
2757 intel_crtc->adjusted_y = y;
2759 I915_WRITE(reg, dspcntr);
2761 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2762 if (INTEL_INFO(dev)->gen >= 4) {
2763 I915_WRITE(DSPSURF(plane),
2764 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2765 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2766 I915_WRITE(DSPLINOFF(plane), linear_offset);
2768 I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
2772 static void i9xx_disable_primary_plane(struct drm_plane *primary,
2773 struct drm_crtc *crtc)
2775 struct drm_device *dev = crtc->dev;
2776 struct drm_i915_private *dev_priv = dev->dev_private;
2777 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2778 int plane = intel_crtc->plane;
2780 I915_WRITE(DSPCNTR(plane), 0);
2781 if (INTEL_INFO(dev_priv)->gen >= 4)
2782 I915_WRITE(DSPSURF(plane), 0);
2784 I915_WRITE(DSPADDR(plane), 0);
2785 POSTING_READ(DSPCNTR(plane));
2788 static void ironlake_update_primary_plane(struct drm_plane *primary,
2789 const struct intel_crtc_state *crtc_state,
2790 const struct intel_plane_state *plane_state)
2792 struct drm_device *dev = primary->dev;
2793 struct drm_i915_private *dev_priv = dev->dev_private;
2794 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
2795 struct drm_framebuffer *fb = plane_state->base.fb;
2796 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2797 int plane = intel_crtc->plane;
2800 i915_reg_t reg = DSPCNTR(plane);
2801 unsigned int rotation = plane_state->base.rotation;
2802 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
2803 int x = plane_state->src.x1 >> 16;
2804 int y = plane_state->src.y1 >> 16;
2806 dspcntr = DISPPLANE_GAMMA_ENABLE;
2807 dspcntr |= DISPLAY_PLANE_ENABLE;
2809 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
2810 dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;
2812 switch (fb->pixel_format) {
2814 dspcntr |= DISPPLANE_8BPP;
2816 case DRM_FORMAT_RGB565:
2817 dspcntr |= DISPPLANE_BGRX565;
2819 case DRM_FORMAT_XRGB8888:
2820 dspcntr |= DISPPLANE_BGRX888;
2822 case DRM_FORMAT_XBGR8888:
2823 dspcntr |= DISPPLANE_RGBX888;
2825 case DRM_FORMAT_XRGB2101010:
2826 dspcntr |= DISPPLANE_BGRX101010;
2828 case DRM_FORMAT_XBGR2101010:
2829 dspcntr |= DISPPLANE_RGBX101010;
2835 if (obj->tiling_mode != I915_TILING_NONE)
2836 dspcntr |= DISPPLANE_TILED;
2838 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
2839 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2841 linear_offset = y * fb->pitches[0] + x * cpp;
2842 intel_crtc->dspaddr_offset =
2843 intel_compute_tile_offset(&x, &y, fb, 0,
2844 fb->pitches[0], rotation);
2845 linear_offset -= intel_crtc->dspaddr_offset;
2846 if (rotation == BIT(DRM_ROTATE_180)) {
2847 dspcntr |= DISPPLANE_ROTATE_180;
2849 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
2850 x += (crtc_state->pipe_src_w - 1);
2851 y += (crtc_state->pipe_src_h - 1);
2853 /* Finding the last pixel of the last line of the display
2854 data and adding to linear_offset*/
2856 (crtc_state->pipe_src_h - 1) * fb->pitches[0] +
2857 (crtc_state->pipe_src_w - 1) * cpp;
2861 intel_crtc->adjusted_x = x;
2862 intel_crtc->adjusted_y = y;
2864 I915_WRITE(reg, dspcntr);
2866 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2867 I915_WRITE(DSPSURF(plane),
2868 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2869 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
2870 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2872 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2873 I915_WRITE(DSPLINOFF(plane), linear_offset);
2878 u32 intel_fb_stride_alignment(const struct drm_i915_private *dev_priv,
2879 uint64_t fb_modifier, uint32_t pixel_format)
2881 if (fb_modifier == DRM_FORMAT_MOD_NONE) {
2884 int cpp = drm_format_plane_cpp(pixel_format, 0);
2886 return intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
2890 u32 intel_plane_obj_offset(struct intel_plane *intel_plane,
2891 struct drm_i915_gem_object *obj,
2894 struct i915_ggtt_view view;
2895 struct i915_vma *vma;
2898 intel_fill_fb_ggtt_view(&view, intel_plane->base.state->fb,
2899 intel_plane->base.state->rotation);
2901 vma = i915_gem_obj_to_ggtt_view(obj, &view);
2902 if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n",
2906 offset = vma->node.start;
2909 offset += vma->ggtt_view.params.rotated.uv_start_page *
2913 WARN_ON(upper_32_bits(offset));
2915 return lower_32_bits(offset);
2918 static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
2920 struct drm_device *dev = intel_crtc->base.dev;
2921 struct drm_i915_private *dev_priv = dev->dev_private;
2923 I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
2924 I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
2925 I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
2929 * This function detaches (aka. unbinds) unused scalers in hardware
2931 static void skl_detach_scalers(struct intel_crtc *intel_crtc)
2933 struct intel_crtc_scaler_state *scaler_state;
2936 scaler_state = &intel_crtc->config->scaler_state;
2938 /* loop through and disable scalers that aren't in use */
2939 for (i = 0; i < intel_crtc->num_scalers; i++) {
2940 if (!scaler_state->scalers[i].in_use)
2941 skl_detach_scaler(intel_crtc, i);
2945 u32 skl_plane_ctl_format(uint32_t pixel_format)
2947 switch (pixel_format) {
2949 return PLANE_CTL_FORMAT_INDEXED;
2950 case DRM_FORMAT_RGB565:
2951 return PLANE_CTL_FORMAT_RGB_565;
2952 case DRM_FORMAT_XBGR8888:
2953 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
2954 case DRM_FORMAT_XRGB8888:
2955 return PLANE_CTL_FORMAT_XRGB_8888;
2957 * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
2958 * to be already pre-multiplied. We need to add a knob (or a different
2959 * DRM_FORMAT) for user-space to configure that.
2961 case DRM_FORMAT_ABGR8888:
2962 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX |
2963 PLANE_CTL_ALPHA_SW_PREMULTIPLY;
2964 case DRM_FORMAT_ARGB8888:
2965 return PLANE_CTL_FORMAT_XRGB_8888 |
2966 PLANE_CTL_ALPHA_SW_PREMULTIPLY;
2967 case DRM_FORMAT_XRGB2101010:
2968 return PLANE_CTL_FORMAT_XRGB_2101010;
2969 case DRM_FORMAT_XBGR2101010:
2970 return PLANE_CTL_ORDER_RGBX | PLANE_CTL_FORMAT_XRGB_2101010;
2971 case DRM_FORMAT_YUYV:
2972 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
2973 case DRM_FORMAT_YVYU:
2974 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
2975 case DRM_FORMAT_UYVY:
2976 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
2977 case DRM_FORMAT_VYUY:
2978 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
2980 MISSING_CASE(pixel_format);
2986 u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
2988 switch (fb_modifier) {
2989 case DRM_FORMAT_MOD_NONE:
2991 case I915_FORMAT_MOD_X_TILED:
2992 return PLANE_CTL_TILED_X;
2993 case I915_FORMAT_MOD_Y_TILED:
2994 return PLANE_CTL_TILED_Y;
2995 case I915_FORMAT_MOD_Yf_TILED:
2996 return PLANE_CTL_TILED_YF;
2998 MISSING_CASE(fb_modifier);
3004 u32 skl_plane_ctl_rotation(unsigned int rotation)
3007 case BIT(DRM_ROTATE_0):
3010 * DRM_ROTATE_ is counter clockwise to stay compatible with Xrandr
3011 * while i915 HW rotation is clockwise, thats why this swapping.
3013 case BIT(DRM_ROTATE_90):
3014 return PLANE_CTL_ROTATE_270;
3015 case BIT(DRM_ROTATE_180):
3016 return PLANE_CTL_ROTATE_180;
3017 case BIT(DRM_ROTATE_270):
3018 return PLANE_CTL_ROTATE_90;
3020 MISSING_CASE(rotation);
3026 static void skylake_update_primary_plane(struct drm_plane *plane,
3027 const struct intel_crtc_state *crtc_state,
3028 const struct intel_plane_state *plane_state)
3030 struct drm_device *dev = plane->dev;
3031 struct drm_i915_private *dev_priv = dev->dev_private;
3032 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
3033 struct drm_framebuffer *fb = plane_state->base.fb;
3034 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
3035 int pipe = intel_crtc->pipe;
3036 u32 plane_ctl, stride_div, stride;
3037 u32 tile_height, plane_offset, plane_size;
3038 unsigned int rotation = plane_state->base.rotation;
3039 int x_offset, y_offset;
3041 int scaler_id = plane_state->scaler_id;
3042 int src_x = plane_state->src.x1 >> 16;
3043 int src_y = plane_state->src.y1 >> 16;
3044 int src_w = drm_rect_width(&plane_state->src) >> 16;
3045 int src_h = drm_rect_height(&plane_state->src) >> 16;
3046 int dst_x = plane_state->dst.x1;
3047 int dst_y = plane_state->dst.y1;
3048 int dst_w = drm_rect_width(&plane_state->dst);
3049 int dst_h = drm_rect_height(&plane_state->dst);
3051 plane_ctl = PLANE_CTL_ENABLE |
3052 PLANE_CTL_PIPE_GAMMA_ENABLE |
3053 PLANE_CTL_PIPE_CSC_ENABLE;
3055 plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
3056 plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
3057 plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
3058 plane_ctl |= skl_plane_ctl_rotation(rotation);
3060 stride_div = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
3062 surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj, 0);
3064 WARN_ON(drm_rect_width(&plane_state->src) == 0);
3066 if (intel_rotation_90_or_270(rotation)) {
3067 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
3069 /* stride = Surface height in tiles */
3070 tile_height = intel_tile_height(dev_priv, fb->modifier[0], cpp);
3071 stride = DIV_ROUND_UP(fb->height, tile_height);
3072 x_offset = stride * tile_height - src_y - src_h;
3074 plane_size = (src_w - 1) << 16 | (src_h - 1);
3076 stride = fb->pitches[0] / stride_div;
3079 plane_size = (src_h - 1) << 16 | (src_w - 1);
3081 plane_offset = y_offset << 16 | x_offset;
3083 intel_crtc->adjusted_x = x_offset;
3084 intel_crtc->adjusted_y = y_offset;
3086 I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
3087 I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
3088 I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
3089 I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
3091 if (scaler_id >= 0) {
3092 uint32_t ps_ctrl = 0;
3094 WARN_ON(!dst_w || !dst_h);
3095 ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
3096 crtc_state->scaler_state.scalers[scaler_id].mode;
3097 I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
3098 I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
3099 I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) | dst_y);
3100 I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) | dst_h);
3101 I915_WRITE(PLANE_POS(pipe, 0), 0);
3103 I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
3106 I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
3108 POSTING_READ(PLANE_SURF(pipe, 0));
3111 static void skylake_disable_primary_plane(struct drm_plane *primary,
3112 struct drm_crtc *crtc)
3114 struct drm_device *dev = crtc->dev;
3115 struct drm_i915_private *dev_priv = dev->dev_private;
3116 int pipe = to_intel_crtc(crtc)->pipe;
3118 I915_WRITE(PLANE_CTL(pipe, 0), 0);
3119 I915_WRITE(PLANE_SURF(pipe, 0), 0);
3120 POSTING_READ(PLANE_SURF(pipe, 0));
3123 /* Assume fb object is pinned & idle & fenced and just update base pointers */
3125 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
3126 int x, int y, enum mode_set_atomic state)
3128 /* Support for kgdboc is disabled, this needs a major rework. */
3129 DRM_ERROR("legacy panic handler not supported any more.\n");
3134 static void intel_complete_page_flips(struct drm_device *dev)
3136 struct drm_crtc *crtc;
3138 for_each_crtc(dev, crtc) {
3139 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3140 enum plane plane = intel_crtc->plane;
3142 intel_prepare_page_flip(dev, plane);
3143 intel_finish_page_flip_plane(dev, plane);
3147 static void intel_update_primary_planes(struct drm_device *dev)
3149 struct drm_crtc *crtc;
3151 for_each_crtc(dev, crtc) {
3152 struct intel_plane *plane = to_intel_plane(crtc->primary);
3153 struct intel_plane_state *plane_state;
3155 drm_modeset_lock_crtc(crtc, &plane->base);
3156 plane_state = to_intel_plane_state(plane->base.state);
3158 if (plane_state->visible)
3159 plane->update_plane(&plane->base,
3160 to_intel_crtc_state(crtc->state),
3163 drm_modeset_unlock_crtc(crtc);
3167 void intel_prepare_reset(struct drm_device *dev)
3169 /* no reset support for gen2 */
3173 /* reset doesn't touch the display */
3174 if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
3177 drm_modeset_lock_all(dev);
3179 * Disabling the crtcs gracefully seems nicer. Also the
3180 * g33 docs say we should at least disable all the planes.
3182 intel_display_suspend(dev);
3185 void intel_finish_reset(struct drm_device *dev)
3187 struct drm_i915_private *dev_priv = to_i915(dev);
3190 * Flips in the rings will be nuked by the reset,
3191 * so complete all pending flips so that user space
3192 * will get its events and not get stuck.
3194 intel_complete_page_flips(dev);
3196 /* no reset support for gen2 */
3200 /* reset doesn't touch the display */
3201 if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev)) {
3203 * Flips in the rings have been nuked by the reset,
3204 * so update the base address of all primary
3205 * planes to the the last fb to make sure we're
3206 * showing the correct fb after a reset.
3208 * FIXME: Atomic will make this obsolete since we won't schedule
3209 * CS-based flips (which might get lost in gpu resets) any more.
3211 intel_update_primary_planes(dev);
3216 * The display has been reset as well,
3217 * so need a full re-initialization.
3219 intel_runtime_pm_disable_interrupts(dev_priv);
3220 intel_runtime_pm_enable_interrupts(dev_priv);
3222 intel_modeset_init_hw(dev);
3224 spin_lock_irq(&dev_priv->irq_lock);
3225 if (dev_priv->display.hpd_irq_setup)
3226 dev_priv->display.hpd_irq_setup(dev);
3227 spin_unlock_irq(&dev_priv->irq_lock);
3229 intel_display_resume(dev);
3231 intel_hpd_init(dev_priv);
3233 drm_modeset_unlock_all(dev);
3236 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
3238 struct drm_device *dev = crtc->dev;
3239 struct drm_i915_private *dev_priv = dev->dev_private;
3240 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3243 if (i915_reset_in_progress(&dev_priv->gpu_error) ||
3244 intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
3247 spin_lock_irq(&dev->event_lock);
3248 pending = to_intel_crtc(crtc)->unpin_work != NULL;
3249 spin_unlock_irq(&dev->event_lock);
3254 static void intel_update_pipe_config(struct intel_crtc *crtc,
3255 struct intel_crtc_state *old_crtc_state)
3257 struct drm_device *dev = crtc->base.dev;
3258 struct drm_i915_private *dev_priv = dev->dev_private;
3259 struct intel_crtc_state *pipe_config =
3260 to_intel_crtc_state(crtc->base.state);
3262 /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
3263 crtc->base.mode = crtc->base.state->mode;
3265 DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
3266 old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
3267 pipe_config->pipe_src_w, pipe_config->pipe_src_h);
3270 intel_set_pipe_csc(&crtc->base);
3273 * Update pipe size and adjust fitter if needed: the reason for this is
3274 * that in compute_mode_changes we check the native mode (not the pfit
3275 * mode) to see if we can flip rather than do a full mode set. In the
3276 * fastboot case, we'll flip, but if we don't update the pipesrc and
3277 * pfit state, we'll end up with a big fb scanned out into the wrong
3281 I915_WRITE(PIPESRC(crtc->pipe),
3282 ((pipe_config->pipe_src_w - 1) << 16) |
3283 (pipe_config->pipe_src_h - 1));
3285 /* on skylake this is done by detaching scalers */
3286 if (INTEL_INFO(dev)->gen >= 9) {
3287 skl_detach_scalers(crtc);
3289 if (pipe_config->pch_pfit.enabled)
3290 skylake_pfit_enable(crtc);
3291 } else if (HAS_PCH_SPLIT(dev)) {
3292 if (pipe_config->pch_pfit.enabled)
3293 ironlake_pfit_enable(crtc);
3294 else if (old_crtc_state->pch_pfit.enabled)
3295 ironlake_pfit_disable(crtc, true);
3299 static void intel_fdi_normal_train(struct drm_crtc *crtc)
3301 struct drm_device *dev = crtc->dev;
3302 struct drm_i915_private *dev_priv = dev->dev_private;
3303 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3304 int pipe = intel_crtc->pipe;
3308 /* enable normal train */
3309 reg = FDI_TX_CTL(pipe);
3310 temp = I915_READ(reg);
3311 if (IS_IVYBRIDGE(dev)) {
3312 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
3313 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
3315 temp &= ~FDI_LINK_TRAIN_NONE;
3316 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
3318 I915_WRITE(reg, temp);
3320 reg = FDI_RX_CTL(pipe);
3321 temp = I915_READ(reg);
3322 if (HAS_PCH_CPT(dev)) {
3323 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3324 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
3326 temp &= ~FDI_LINK_TRAIN_NONE;
3327 temp |= FDI_LINK_TRAIN_NONE;
3329 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
3331 /* wait one idle pattern time */
3335 /* IVB wants error correction enabled */
3336 if (IS_IVYBRIDGE(dev))
3337 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
3338 FDI_FE_ERRC_ENABLE);
3341 /* The FDI link training functions for ILK/Ibexpeak. */
3342 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
3344 struct drm_device *dev = crtc->dev;
3345 struct drm_i915_private *dev_priv = dev->dev_private;
3346 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3347 int pipe = intel_crtc->pipe;
3351 /* FDI needs bits from pipe first */
3352 assert_pipe_enabled(dev_priv, pipe);
3354 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3356 reg = FDI_RX_IMR(pipe);
3357 temp = I915_READ(reg);
3358 temp &= ~FDI_RX_SYMBOL_LOCK;
3359 temp &= ~FDI_RX_BIT_LOCK;
3360 I915_WRITE(reg, temp);
3364 /* enable CPU FDI TX and PCH FDI RX */
3365 reg = FDI_TX_CTL(pipe);
3366 temp = I915_READ(reg);
3367 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3368 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3369 temp &= ~FDI_LINK_TRAIN_NONE;
3370 temp |= FDI_LINK_TRAIN_PATTERN_1;
3371 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3373 reg = FDI_RX_CTL(pipe);
3374 temp = I915_READ(reg);
3375 temp &= ~FDI_LINK_TRAIN_NONE;
3376 temp |= FDI_LINK_TRAIN_PATTERN_1;
3377 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3382 /* Ironlake workaround, enable clock pointer after FDI enable*/
3383 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3384 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
3385 FDI_RX_PHASE_SYNC_POINTER_EN);
3387 reg = FDI_RX_IIR(pipe);
3388 for (tries = 0; tries < 5; tries++) {
3389 temp = I915_READ(reg);
3390 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3392 if ((temp & FDI_RX_BIT_LOCK)) {
3393 DRM_DEBUG_KMS("FDI train 1 done.\n");
3394 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3399 DRM_ERROR("FDI train 1 fail!\n");
3402 reg = FDI_TX_CTL(pipe);
3403 temp = I915_READ(reg);
3404 temp &= ~FDI_LINK_TRAIN_NONE;
3405 temp |= FDI_LINK_TRAIN_PATTERN_2;
3406 I915_WRITE(reg, temp);
3408 reg = FDI_RX_CTL(pipe);
3409 temp = I915_READ(reg);
3410 temp &= ~FDI_LINK_TRAIN_NONE;
3411 temp |= FDI_LINK_TRAIN_PATTERN_2;
3412 I915_WRITE(reg, temp);
3417 reg = FDI_RX_IIR(pipe);
3418 for (tries = 0; tries < 5; tries++) {
3419 temp = I915_READ(reg);
3420 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3422 if (temp & FDI_RX_SYMBOL_LOCK) {
3423 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3424 DRM_DEBUG_KMS("FDI train 2 done.\n");
3429 DRM_ERROR("FDI train 2 fail!\n");
3431 DRM_DEBUG_KMS("FDI train done\n");
3435 static const int snb_b_fdi_train_param[] = {
3436 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
3437 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
3438 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
3439 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
3442 /* The FDI link training functions for SNB/Cougarpoint. */
3443 static void gen6_fdi_link_train(struct drm_crtc *crtc)
3445 struct drm_device *dev = crtc->dev;
3446 struct drm_i915_private *dev_priv = dev->dev_private;
3447 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3448 int pipe = intel_crtc->pipe;
3452 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3454 reg = FDI_RX_IMR(pipe);
3455 temp = I915_READ(reg);
3456 temp &= ~FDI_RX_SYMBOL_LOCK;
3457 temp &= ~FDI_RX_BIT_LOCK;
3458 I915_WRITE(reg, temp);
3463 /* enable CPU FDI TX and PCH FDI RX */
3464 reg = FDI_TX_CTL(pipe);
3465 temp = I915_READ(reg);
3466 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3467 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3468 temp &= ~FDI_LINK_TRAIN_NONE;
3469 temp |= FDI_LINK_TRAIN_PATTERN_1;
3470 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3472 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3473 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3475 I915_WRITE(FDI_RX_MISC(pipe),
3476 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3478 reg = FDI_RX_CTL(pipe);
3479 temp = I915_READ(reg);
3480 if (HAS_PCH_CPT(dev)) {
3481 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3482 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3484 temp &= ~FDI_LINK_TRAIN_NONE;
3485 temp |= FDI_LINK_TRAIN_PATTERN_1;
3487 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3492 for (i = 0; i < 4; i++) {
3493 reg = FDI_TX_CTL(pipe);
3494 temp = I915_READ(reg);
3495 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3496 temp |= snb_b_fdi_train_param[i];
3497 I915_WRITE(reg, temp);
3502 for (retry = 0; retry < 5; retry++) {
3503 reg = FDI_RX_IIR(pipe);
3504 temp = I915_READ(reg);
3505 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3506 if (temp & FDI_RX_BIT_LOCK) {
3507 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3508 DRM_DEBUG_KMS("FDI train 1 done.\n");
3517 DRM_ERROR("FDI train 1 fail!\n");
3520 reg = FDI_TX_CTL(pipe);
3521 temp = I915_READ(reg);
3522 temp &= ~FDI_LINK_TRAIN_NONE;
3523 temp |= FDI_LINK_TRAIN_PATTERN_2;
3525 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3527 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3529 I915_WRITE(reg, temp);
3531 reg = FDI_RX_CTL(pipe);
3532 temp = I915_READ(reg);
3533 if (HAS_PCH_CPT(dev)) {
3534 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3535 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3537 temp &= ~FDI_LINK_TRAIN_NONE;
3538 temp |= FDI_LINK_TRAIN_PATTERN_2;
3540 I915_WRITE(reg, temp);
3545 for (i = 0; i < 4; i++) {
3546 reg = FDI_TX_CTL(pipe);
3547 temp = I915_READ(reg);
3548 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3549 temp |= snb_b_fdi_train_param[i];
3550 I915_WRITE(reg, temp);
3555 for (retry = 0; retry < 5; retry++) {
3556 reg = FDI_RX_IIR(pipe);
3557 temp = I915_READ(reg);
3558 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3559 if (temp & FDI_RX_SYMBOL_LOCK) {
3560 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3561 DRM_DEBUG_KMS("FDI train 2 done.\n");
3570 DRM_ERROR("FDI train 2 fail!\n");
3572 DRM_DEBUG_KMS("FDI train done.\n");
3575 /* Manual link training for Ivy Bridge A0 parts */
3576 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
3578 struct drm_device *dev = crtc->dev;
3579 struct drm_i915_private *dev_priv = dev->dev_private;
3580 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3581 int pipe = intel_crtc->pipe;
3585 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3587 reg = FDI_RX_IMR(pipe);
3588 temp = I915_READ(reg);
3589 temp &= ~FDI_RX_SYMBOL_LOCK;
3590 temp &= ~FDI_RX_BIT_LOCK;
3591 I915_WRITE(reg, temp);
3596 DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
3597 I915_READ(FDI_RX_IIR(pipe)));
3599 /* Try each vswing and preemphasis setting twice before moving on */
3600 for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
3601 /* disable first in case we need to retry */
3602 reg = FDI_TX_CTL(pipe);
3603 temp = I915_READ(reg);
3604 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
3605 temp &= ~FDI_TX_ENABLE;
3606 I915_WRITE(reg, temp);
3608 reg = FDI_RX_CTL(pipe);
3609 temp = I915_READ(reg);
3610 temp &= ~FDI_LINK_TRAIN_AUTO;
3611 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3612 temp &= ~FDI_RX_ENABLE;
3613 I915_WRITE(reg, temp);
3615 /* enable CPU FDI TX and PCH FDI RX */
3616 reg = FDI_TX_CTL(pipe);
3617 temp = I915_READ(reg);
3618 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3619 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3620 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
3621 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3622 temp |= snb_b_fdi_train_param[j/2];
3623 temp |= FDI_COMPOSITE_SYNC;
3624 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3626 I915_WRITE(FDI_RX_MISC(pipe),
3627 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3629 reg = FDI_RX_CTL(pipe);
3630 temp = I915_READ(reg);
3631 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3632 temp |= FDI_COMPOSITE_SYNC;
3633 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3636 udelay(1); /* should be 0.5us */
3638 for (i = 0; i < 4; i++) {
3639 reg = FDI_RX_IIR(pipe);
3640 temp = I915_READ(reg);
3641 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3643 if (temp & FDI_RX_BIT_LOCK ||
3644 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
3645 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3646 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
3650 udelay(1); /* should be 0.5us */
3653 DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
3658 reg = FDI_TX_CTL(pipe);
3659 temp = I915_READ(reg);
3660 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
3661 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
3662 I915_WRITE(reg, temp);
3664 reg = FDI_RX_CTL(pipe);
3665 temp = I915_READ(reg);
3666 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3667 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3668 I915_WRITE(reg, temp);
3671 udelay(2); /* should be 1.5us */
3673 for (i = 0; i < 4; i++) {
3674 reg = FDI_RX_IIR(pipe);
3675 temp = I915_READ(reg);
3676 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3678 if (temp & FDI_RX_SYMBOL_LOCK ||
3679 (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
3680 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3681 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
3685 udelay(2); /* should be 1.5us */
3688 DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
3692 DRM_DEBUG_KMS("FDI train done.\n");
3695 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
3697 struct drm_device *dev = intel_crtc->base.dev;
3698 struct drm_i915_private *dev_priv = dev->dev_private;
3699 int pipe = intel_crtc->pipe;
3703 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
3704 reg = FDI_RX_CTL(pipe);
3705 temp = I915_READ(reg);
3706 temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
3707 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3708 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3709 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
3714 /* Switch from Rawclk to PCDclk */
3715 temp = I915_READ(reg);
3716 I915_WRITE(reg, temp | FDI_PCDCLK);
3721 /* Enable CPU FDI TX PLL, always on for Ironlake */
3722 reg = FDI_TX_CTL(pipe);
3723 temp = I915_READ(reg);
3724 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
3725 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
3732 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
3734 struct drm_device *dev = intel_crtc->base.dev;
3735 struct drm_i915_private *dev_priv = dev->dev_private;
3736 int pipe = intel_crtc->pipe;
3740 /* Switch from PCDclk to Rawclk */
3741 reg = FDI_RX_CTL(pipe);
3742 temp = I915_READ(reg);
3743 I915_WRITE(reg, temp & ~FDI_PCDCLK);
3745 /* Disable CPU FDI TX PLL */
3746 reg = FDI_TX_CTL(pipe);
3747 temp = I915_READ(reg);
3748 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
3753 reg = FDI_RX_CTL(pipe);
3754 temp = I915_READ(reg);
3755 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
3757 /* Wait for the clocks to turn off. */
3762 static void ironlake_fdi_disable(struct drm_crtc *crtc)
3764 struct drm_device *dev = crtc->dev;
3765 struct drm_i915_private *dev_priv = dev->dev_private;
3766 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3767 int pipe = intel_crtc->pipe;
3771 /* disable CPU FDI tx and PCH FDI rx */
3772 reg = FDI_TX_CTL(pipe);
3773 temp = I915_READ(reg);
3774 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
3777 reg = FDI_RX_CTL(pipe);
3778 temp = I915_READ(reg);
3779 temp &= ~(0x7 << 16);
3780 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3781 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
3786 /* Ironlake workaround, disable clock pointer after downing FDI */
3787 if (HAS_PCH_IBX(dev))
3788 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3790 /* still set train pattern 1 */
3791 reg = FDI_TX_CTL(pipe);
3792 temp = I915_READ(reg);
3793 temp &= ~FDI_LINK_TRAIN_NONE;
3794 temp |= FDI_LINK_TRAIN_PATTERN_1;
3795 I915_WRITE(reg, temp);
3797 reg = FDI_RX_CTL(pipe);
3798 temp = I915_READ(reg);
3799 if (HAS_PCH_CPT(dev)) {
3800 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3801 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3803 temp &= ~FDI_LINK_TRAIN_NONE;
3804 temp |= FDI_LINK_TRAIN_PATTERN_1;
3806 /* BPC in FDI rx is consistent with that in PIPECONF */
3807 temp &= ~(0x07 << 16);
3808 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3809 I915_WRITE(reg, temp);
3815 bool intel_has_pending_fb_unpin(struct drm_device *dev)
3817 struct intel_crtc *crtc;
3819 /* Note that we don't need to be called with mode_config.lock here
3820 * as our list of CRTC objects is static for the lifetime of the
3821 * device and so cannot disappear as we iterate. Similarly, we can
3822 * happily treat the predicates as racy, atomic checks as userspace
3823 * cannot claim and pin a new fb without at least acquring the
3824 * struct_mutex and so serialising with us.
3826 for_each_intel_crtc(dev, crtc) {
3827 if (atomic_read(&crtc->unpin_work_count) == 0)
3830 if (crtc->unpin_work)
3831 intel_wait_for_vblank(dev, crtc->pipe);
3839 static void page_flip_completed(struct intel_crtc *intel_crtc)
3841 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
3842 struct intel_unpin_work *work = intel_crtc->unpin_work;
3844 /* ensure that the unpin work is consistent wrt ->pending. */
3846 intel_crtc->unpin_work = NULL;
3849 drm_send_vblank_event(intel_crtc->base.dev,
3853 drm_crtc_vblank_put(&intel_crtc->base);
3855 wake_up_all(&dev_priv->pending_flip_queue);
3856 queue_work(dev_priv->wq, &work->work);
3858 trace_i915_flip_complete(intel_crtc->plane,
3859 work->pending_flip_obj);
3862 static int intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
3864 struct drm_device *dev = crtc->dev;
3865 struct drm_i915_private *dev_priv = dev->dev_private;
3868 WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
3870 ret = wait_event_interruptible_timeout(
3871 dev_priv->pending_flip_queue,
3872 !intel_crtc_has_pending_flip(crtc),
3879 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3881 spin_lock_irq(&dev->event_lock);
3882 if (intel_crtc->unpin_work) {
3883 WARN_ONCE(1, "Removing stuck page flip\n");
3884 page_flip_completed(intel_crtc);
3886 spin_unlock_irq(&dev->event_lock);
3892 static void lpt_disable_iclkip(struct drm_i915_private *dev_priv)
3896 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
3898 mutex_lock(&dev_priv->sb_lock);
3900 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3901 temp |= SBI_SSCCTL_DISABLE;
3902 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3904 mutex_unlock(&dev_priv->sb_lock);
3907 /* Program iCLKIP clock to the desired frequency */
3908 static void lpt_program_iclkip(struct drm_crtc *crtc)
3910 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
3911 int clock = to_intel_crtc(crtc)->config->base.adjusted_mode.crtc_clock;
3912 u32 divsel, phaseinc, auxdiv, phasedir = 0;
3915 lpt_disable_iclkip(dev_priv);
3917 /* The iCLK virtual clock root frequency is in MHz,
3918 * but the adjusted_mode->crtc_clock in in KHz. To get the
3919 * divisors, it is necessary to divide one by another, so we
3920 * convert the virtual clock precision to KHz here for higher
3923 for (auxdiv = 0; auxdiv < 2; auxdiv++) {
3924 u32 iclk_virtual_root_freq = 172800 * 1000;
3925 u32 iclk_pi_range = 64;
3926 u32 desired_divisor;
3928 desired_divisor = DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
3930 divsel = (desired_divisor / iclk_pi_range) - 2;
3931 phaseinc = desired_divisor % iclk_pi_range;
3934 * Near 20MHz is a corner case which is
3935 * out of range for the 7-bit divisor
3941 /* This should not happen with any sane values */
3942 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
3943 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
3944 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
3945 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
3947 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
3954 mutex_lock(&dev_priv->sb_lock);
3956 /* Program SSCDIVINTPHASE6 */
3957 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3958 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
3959 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
3960 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
3961 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
3962 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
3963 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
3964 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
3966 /* Program SSCAUXDIV */
3967 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3968 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
3969 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
3970 intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
3972 /* Enable modulator and associated divider */
3973 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3974 temp &= ~SBI_SSCCTL_DISABLE;
3975 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3977 mutex_unlock(&dev_priv->sb_lock);
3979 /* Wait for initialization time */
3982 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
3985 int lpt_get_iclkip(struct drm_i915_private *dev_priv)
3987 u32 divsel, phaseinc, auxdiv;
3988 u32 iclk_virtual_root_freq = 172800 * 1000;
3989 u32 iclk_pi_range = 64;
3990 u32 desired_divisor;
3993 if ((I915_READ(PIXCLK_GATE) & PIXCLK_GATE_UNGATE) == 0)
3996 mutex_lock(&dev_priv->sb_lock);
3998 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3999 if (temp & SBI_SSCCTL_DISABLE) {
4000 mutex_unlock(&dev_priv->sb_lock);
4004 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
4005 divsel = (temp & SBI_SSCDIVINTPHASE_DIVSEL_MASK) >>
4006 SBI_SSCDIVINTPHASE_DIVSEL_SHIFT;
4007 phaseinc = (temp & SBI_SSCDIVINTPHASE_INCVAL_MASK) >>
4008 SBI_SSCDIVINTPHASE_INCVAL_SHIFT;
4010 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
4011 auxdiv = (temp & SBI_SSCAUXDIV_FINALDIV2SEL_MASK) >>
4012 SBI_SSCAUXDIV_FINALDIV2SEL_SHIFT;
4014 mutex_unlock(&dev_priv->sb_lock);
4016 desired_divisor = (divsel + 2) * iclk_pi_range + phaseinc;
4018 return DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
4019 desired_divisor << auxdiv);
4022 static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
4023 enum pipe pch_transcoder)
4025 struct drm_device *dev = crtc->base.dev;
4026 struct drm_i915_private *dev_priv = dev->dev_private;
4027 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
4029 I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
4030 I915_READ(HTOTAL(cpu_transcoder)));
4031 I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
4032 I915_READ(HBLANK(cpu_transcoder)));
4033 I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
4034 I915_READ(HSYNC(cpu_transcoder)));
4036 I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
4037 I915_READ(VTOTAL(cpu_transcoder)));
4038 I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
4039 I915_READ(VBLANK(cpu_transcoder)));
4040 I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
4041 I915_READ(VSYNC(cpu_transcoder)));
4042 I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
4043 I915_READ(VSYNCSHIFT(cpu_transcoder)));
4046 static void cpt_set_fdi_bc_bifurcation(struct drm_device *dev, bool enable)
4048 struct drm_i915_private *dev_priv = dev->dev_private;
4051 temp = I915_READ(SOUTH_CHICKEN1);
4052 if (!!(temp & FDI_BC_BIFURCATION_SELECT) == enable)
4055 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
4056 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
4058 temp &= ~FDI_BC_BIFURCATION_SELECT;
4060 temp |= FDI_BC_BIFURCATION_SELECT;
4062 DRM_DEBUG_KMS("%sabling fdi C rx\n", enable ? "en" : "dis");
4063 I915_WRITE(SOUTH_CHICKEN1, temp);
4064 POSTING_READ(SOUTH_CHICKEN1);
4067 static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
4069 struct drm_device *dev = intel_crtc->base.dev;
4071 switch (intel_crtc->pipe) {
4075 if (intel_crtc->config->fdi_lanes > 2)
4076 cpt_set_fdi_bc_bifurcation(dev, false);
4078 cpt_set_fdi_bc_bifurcation(dev, true);
4082 cpt_set_fdi_bc_bifurcation(dev, true);
4090 /* Return which DP Port should be selected for Transcoder DP control */
4092 intel_trans_dp_port_sel(struct drm_crtc *crtc)
4094 struct drm_device *dev = crtc->dev;
4095 struct intel_encoder *encoder;
4097 for_each_encoder_on_crtc(dev, crtc, encoder) {
4098 if (encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
4099 encoder->type == INTEL_OUTPUT_EDP)
4100 return enc_to_dig_port(&encoder->base)->port;
4107 * Enable PCH resources required for PCH ports:
4109 * - FDI training & RX/TX
4110 * - update transcoder timings
4111 * - DP transcoding bits
4114 static void ironlake_pch_enable(struct drm_crtc *crtc)
4116 struct drm_device *dev = crtc->dev;
4117 struct drm_i915_private *dev_priv = dev->dev_private;
4118 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4119 int pipe = intel_crtc->pipe;
4122 assert_pch_transcoder_disabled(dev_priv, pipe);
4124 if (IS_IVYBRIDGE(dev))
4125 ivybridge_update_fdi_bc_bifurcation(intel_crtc);
4127 /* Write the TU size bits before fdi link training, so that error
4128 * detection works. */
4129 I915_WRITE(FDI_RX_TUSIZE1(pipe),
4130 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
4133 * Sometimes spurious CPU pipe underruns happen during FDI
4134 * training, at least with VGA+HDMI cloning. Suppress them.
4136 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4138 /* For PCH output, training FDI link */
4139 dev_priv->display.fdi_link_train(crtc);
4141 /* We need to program the right clock selection before writing the pixel
4142 * mutliplier into the DPLL. */
4143 if (HAS_PCH_CPT(dev)) {
4146 temp = I915_READ(PCH_DPLL_SEL);
4147 temp |= TRANS_DPLL_ENABLE(pipe);
4148 sel = TRANS_DPLLB_SEL(pipe);
4149 if (intel_crtc->config->shared_dpll ==
4150 intel_get_shared_dpll_by_id(dev_priv, DPLL_ID_PCH_PLL_B))
4154 I915_WRITE(PCH_DPLL_SEL, temp);
4157 /* XXX: pch pll's can be enabled any time before we enable the PCH
4158 * transcoder, and we actually should do this to not upset any PCH
4159 * transcoder that already use the clock when we share it.
4161 * Note that enable_shared_dpll tries to do the right thing, but
4162 * get_shared_dpll unconditionally resets the pll - we need that to have
4163 * the right LVDS enable sequence. */
4164 intel_enable_shared_dpll(intel_crtc);
4166 /* set transcoder timing, panel must allow it */
4167 assert_panel_unlocked(dev_priv, pipe);
4168 ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
4170 intel_fdi_normal_train(crtc);
4172 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4174 /* For PCH DP, enable TRANS_DP_CTL */
4175 if (HAS_PCH_CPT(dev) && intel_crtc->config->has_dp_encoder) {
4176 const struct drm_display_mode *adjusted_mode =
4177 &intel_crtc->config->base.adjusted_mode;
4178 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
4179 i915_reg_t reg = TRANS_DP_CTL(pipe);
4180 temp = I915_READ(reg);
4181 temp &= ~(TRANS_DP_PORT_SEL_MASK |
4182 TRANS_DP_SYNC_MASK |
4184 temp |= TRANS_DP_OUTPUT_ENABLE;
4185 temp |= bpc << 9; /* same format but at 11:9 */
4187 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
4188 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
4189 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
4190 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
4192 switch (intel_trans_dp_port_sel(crtc)) {
4194 temp |= TRANS_DP_PORT_SEL_B;
4197 temp |= TRANS_DP_PORT_SEL_C;
4200 temp |= TRANS_DP_PORT_SEL_D;
4206 I915_WRITE(reg, temp);
4209 ironlake_enable_pch_transcoder(dev_priv, pipe);
4212 static void lpt_pch_enable(struct drm_crtc *crtc)
4214 struct drm_device *dev = crtc->dev;
4215 struct drm_i915_private *dev_priv = dev->dev_private;
4216 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4217 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
4219 assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
4221 lpt_program_iclkip(crtc);
4223 /* Set transcoder timing. */
4224 ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
4226 lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
4229 static void cpt_verify_modeset(struct drm_device *dev, int pipe)
4231 struct drm_i915_private *dev_priv = dev->dev_private;
4232 i915_reg_t dslreg = PIPEDSL(pipe);
4235 temp = I915_READ(dslreg);
4237 if (wait_for(I915_READ(dslreg) != temp, 5)) {
4238 if (wait_for(I915_READ(dslreg) != temp, 5))
4239 DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
4244 skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
4245 unsigned scaler_user, int *scaler_id, unsigned int rotation,
4246 int src_w, int src_h, int dst_w, int dst_h)
4248 struct intel_crtc_scaler_state *scaler_state =
4249 &crtc_state->scaler_state;
4250 struct intel_crtc *intel_crtc =
4251 to_intel_crtc(crtc_state->base.crtc);
4254 need_scaling = intel_rotation_90_or_270(rotation) ?
4255 (src_h != dst_w || src_w != dst_h):
4256 (src_w != dst_w || src_h != dst_h);
4259 * if plane is being disabled or scaler is no more required or force detach
4260 * - free scaler binded to this plane/crtc
4261 * - in order to do this, update crtc->scaler_usage
4263 * Here scaler state in crtc_state is set free so that
4264 * scaler can be assigned to other user. Actual register
4265 * update to free the scaler is done in plane/panel-fit programming.
4266 * For this purpose crtc/plane_state->scaler_id isn't reset here.
4268 if (force_detach || !need_scaling) {
4269 if (*scaler_id >= 0) {
4270 scaler_state->scaler_users &= ~(1 << scaler_user);
4271 scaler_state->scalers[*scaler_id].in_use = 0;
4273 DRM_DEBUG_KMS("scaler_user index %u.%u: "
4274 "Staged freeing scaler id %d scaler_users = 0x%x\n",
4275 intel_crtc->pipe, scaler_user, *scaler_id,
4276 scaler_state->scaler_users);
4283 if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
4284 dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
4286 src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
4287 dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H) {
4288 DRM_DEBUG_KMS("scaler_user index %u.%u: src %ux%u dst %ux%u "
4289 "size is out of scaler range\n",
4290 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h);
4294 /* mark this plane as a scaler user in crtc_state */
4295 scaler_state->scaler_users |= (1 << scaler_user);
4296 DRM_DEBUG_KMS("scaler_user index %u.%u: "
4297 "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
4298 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
4299 scaler_state->scaler_users);
4305 * skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
4307 * @state: crtc's scaler state
4310 * 0 - scaler_usage updated successfully
4311 * error - requested scaling cannot be supported or other error condition
4313 int skl_update_scaler_crtc(struct intel_crtc_state *state)
4315 struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
4316 const struct drm_display_mode *adjusted_mode = &state->base.adjusted_mode;
4318 DRM_DEBUG_KMS("Updating scaler for [CRTC:%i] scaler_user index %u.%u\n",
4319 intel_crtc->base.base.id, intel_crtc->pipe, SKL_CRTC_INDEX);
4321 return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
4322 &state->scaler_state.scaler_id, BIT(DRM_ROTATE_0),
4323 state->pipe_src_w, state->pipe_src_h,
4324 adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
4328 * skl_update_scaler_plane - Stages update to scaler state for a given plane.
4330 * @state: crtc's scaler state
4331 * @plane_state: atomic plane state to update
4334 * 0 - scaler_usage updated successfully
4335 * error - requested scaling cannot be supported or other error condition
4337 static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
4338 struct intel_plane_state *plane_state)
4341 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
4342 struct intel_plane *intel_plane =
4343 to_intel_plane(plane_state->base.plane);
4344 struct drm_framebuffer *fb = plane_state->base.fb;
4347 bool force_detach = !fb || !plane_state->visible;
4349 DRM_DEBUG_KMS("Updating scaler for [PLANE:%d] scaler_user index %u.%u\n",
4350 intel_plane->base.base.id, intel_crtc->pipe,
4351 drm_plane_index(&intel_plane->base));
4353 ret = skl_update_scaler(crtc_state, force_detach,
4354 drm_plane_index(&intel_plane->base),
4355 &plane_state->scaler_id,
4356 plane_state->base.rotation,
4357 drm_rect_width(&plane_state->src) >> 16,
4358 drm_rect_height(&plane_state->src) >> 16,
4359 drm_rect_width(&plane_state->dst),
4360 drm_rect_height(&plane_state->dst));
4362 if (ret || plane_state->scaler_id < 0)
4365 /* check colorkey */
4366 if (plane_state->ckey.flags != I915_SET_COLORKEY_NONE) {
4367 DRM_DEBUG_KMS("[PLANE:%d] scaling with color key not allowed",
4368 intel_plane->base.base.id);
4372 /* Check src format */
4373 switch (fb->pixel_format) {
4374 case DRM_FORMAT_RGB565:
4375 case DRM_FORMAT_XBGR8888:
4376 case DRM_FORMAT_XRGB8888:
4377 case DRM_FORMAT_ABGR8888:
4378 case DRM_FORMAT_ARGB8888:
4379 case DRM_FORMAT_XRGB2101010:
4380 case DRM_FORMAT_XBGR2101010:
4381 case DRM_FORMAT_YUYV:
4382 case DRM_FORMAT_YVYU:
4383 case DRM_FORMAT_UYVY:
4384 case DRM_FORMAT_VYUY:
4387 DRM_DEBUG_KMS("[PLANE:%d] FB:%d unsupported scaling format 0x%x\n",
4388 intel_plane->base.base.id, fb->base.id, fb->pixel_format);
4395 static void skylake_scaler_disable(struct intel_crtc *crtc)
4399 for (i = 0; i < crtc->num_scalers; i++)
4400 skl_detach_scaler(crtc, i);
4403 static void skylake_pfit_enable(struct intel_crtc *crtc)
4405 struct drm_device *dev = crtc->base.dev;
4406 struct drm_i915_private *dev_priv = dev->dev_private;
4407 int pipe = crtc->pipe;
4408 struct intel_crtc_scaler_state *scaler_state =
4409 &crtc->config->scaler_state;
4411 DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
4413 if (crtc->config->pch_pfit.enabled) {
4416 if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
4417 DRM_ERROR("Requesting pfit without getting a scaler first\n");
4421 id = scaler_state->scaler_id;
4422 I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
4423 PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
4424 I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
4425 I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
4427 DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
4431 static void ironlake_pfit_enable(struct intel_crtc *crtc)
4433 struct drm_device *dev = crtc->base.dev;
4434 struct drm_i915_private *dev_priv = dev->dev_private;
4435 int pipe = crtc->pipe;
4437 if (crtc->config->pch_pfit.enabled) {
4438 /* Force use of hard-coded filter coefficients
4439 * as some pre-programmed values are broken,
4442 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
4443 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
4444 PF_PIPE_SEL_IVB(pipe));
4446 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
4447 I915_WRITE(PF_WIN_POS(pipe), crtc->config->pch_pfit.pos);
4448 I915_WRITE(PF_WIN_SZ(pipe), crtc->config->pch_pfit.size);
4452 void hsw_enable_ips(struct intel_crtc *crtc)
4454 struct drm_device *dev = crtc->base.dev;
4455 struct drm_i915_private *dev_priv = dev->dev_private;
4457 if (!crtc->config->ips_enabled)
4460 /* We can only enable IPS after we enable a plane and wait for a vblank */
4461 intel_wait_for_vblank(dev, crtc->pipe);
4463 assert_plane_enabled(dev_priv, crtc->plane);
4464 if (IS_BROADWELL(dev)) {
4465 mutex_lock(&dev_priv->rps.hw_lock);
4466 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000));
4467 mutex_unlock(&dev_priv->rps.hw_lock);
4468 /* Quoting Art Runyan: "its not safe to expect any particular
4469 * value in IPS_CTL bit 31 after enabling IPS through the
4470 * mailbox." Moreover, the mailbox may return a bogus state,
4471 * so we need to just enable it and continue on.
4474 I915_WRITE(IPS_CTL, IPS_ENABLE);
4475 /* The bit only becomes 1 in the next vblank, so this wait here
4476 * is essentially intel_wait_for_vblank. If we don't have this
4477 * and don't wait for vblanks until the end of crtc_enable, then
4478 * the HW state readout code will complain that the expected
4479 * IPS_CTL value is not the one we read. */
4480 if (wait_for(I915_READ_NOTRACE(IPS_CTL) & IPS_ENABLE, 50))
4481 DRM_ERROR("Timed out waiting for IPS enable\n");
4485 void hsw_disable_ips(struct intel_crtc *crtc)
4487 struct drm_device *dev = crtc->base.dev;
4488 struct drm_i915_private *dev_priv = dev->dev_private;
4490 if (!crtc->config->ips_enabled)
4493 assert_plane_enabled(dev_priv, crtc->plane);
4494 if (IS_BROADWELL(dev)) {
4495 mutex_lock(&dev_priv->rps.hw_lock);
4496 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
4497 mutex_unlock(&dev_priv->rps.hw_lock);
4498 /* wait for pcode to finish disabling IPS, which may take up to 42ms */
4499 if (wait_for((I915_READ(IPS_CTL) & IPS_ENABLE) == 0, 42))
4500 DRM_ERROR("Timed out waiting for IPS disable\n");
4502 I915_WRITE(IPS_CTL, 0);
4503 POSTING_READ(IPS_CTL);
4506 /* We need to wait for a vblank before we can disable the plane. */
4507 intel_wait_for_vblank(dev, crtc->pipe);
4510 /** Loads the palette/gamma unit for the CRTC with the prepared values */
4511 static void intel_crtc_load_lut(struct drm_crtc *crtc)
4513 struct drm_device *dev = crtc->dev;
4514 struct drm_i915_private *dev_priv = dev->dev_private;
4515 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4516 enum pipe pipe = intel_crtc->pipe;
4518 bool reenable_ips = false;
4520 /* The clocks have to be on to load the palette. */
4521 if (!crtc->state->active)
4524 if (HAS_GMCH_DISPLAY(dev_priv->dev)) {
4525 if (intel_crtc->config->has_dsi_encoder)
4526 assert_dsi_pll_enabled(dev_priv);
4528 assert_pll_enabled(dev_priv, pipe);
4531 /* Workaround : Do not read or write the pipe palette/gamma data while
4532 * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
4534 if (IS_HASWELL(dev) && intel_crtc->config->ips_enabled &&
4535 ((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) ==
4536 GAMMA_MODE_MODE_SPLIT)) {
4537 hsw_disable_ips(intel_crtc);
4538 reenable_ips = true;
4541 for (i = 0; i < 256; i++) {
4544 if (HAS_GMCH_DISPLAY(dev))
4545 palreg = PALETTE(pipe, i);
4547 palreg = LGC_PALETTE(pipe, i);
4550 (intel_crtc->lut_r[i] << 16) |
4551 (intel_crtc->lut_g[i] << 8) |
4552 intel_crtc->lut_b[i]);
4556 hsw_enable_ips(intel_crtc);
4559 static void intel_crtc_dpms_overlay_disable(struct intel_crtc *intel_crtc)
4561 if (intel_crtc->overlay) {
4562 struct drm_device *dev = intel_crtc->base.dev;
4563 struct drm_i915_private *dev_priv = dev->dev_private;
4565 mutex_lock(&dev->struct_mutex);
4566 dev_priv->mm.interruptible = false;
4567 (void) intel_overlay_switch_off(intel_crtc->overlay);
4568 dev_priv->mm.interruptible = true;
4569 mutex_unlock(&dev->struct_mutex);
4572 /* Let userspace switch the overlay on again. In most cases userspace
4573 * has to recompute where to put it anyway.
4578 * intel_post_enable_primary - Perform operations after enabling primary plane
4579 * @crtc: the CRTC whose primary plane was just enabled
4581 * Performs potentially sleeping operations that must be done after the primary
4582 * plane is enabled, such as updating FBC and IPS. Note that this may be
4583 * called due to an explicit primary plane update, or due to an implicit
4584 * re-enable that is caused when a sprite plane is updated to no longer
4585 * completely hide the primary plane.
4588 intel_post_enable_primary(struct drm_crtc *crtc)
4590 struct drm_device *dev = crtc->dev;
4591 struct drm_i915_private *dev_priv = dev->dev_private;
4592 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4593 int pipe = intel_crtc->pipe;
4596 * FIXME IPS should be fine as long as one plane is
4597 * enabled, but in practice it seems to have problems
4598 * when going from primary only to sprite only and vice
4601 hsw_enable_ips(intel_crtc);
4604 * Gen2 reports pipe underruns whenever all planes are disabled.
4605 * So don't enable underrun reporting before at least some planes
4607 * FIXME: Need to fix the logic to work when we turn off all planes
4608 * but leave the pipe running.
4611 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4613 /* Underruns don't always raise interrupts, so check manually. */
4614 intel_check_cpu_fifo_underruns(dev_priv);
4615 intel_check_pch_fifo_underruns(dev_priv);
4618 /* FIXME move all this to pre_plane_update() with proper state tracking */
4620 intel_pre_disable_primary(struct drm_crtc *crtc)
4622 struct drm_device *dev = crtc->dev;
4623 struct drm_i915_private *dev_priv = dev->dev_private;
4624 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4625 int pipe = intel_crtc->pipe;
4628 * Gen2 reports pipe underruns whenever all planes are disabled.
4629 * So diasble underrun reporting before all the planes get disabled.
4630 * FIXME: Need to fix the logic to work when we turn off all planes
4631 * but leave the pipe running.
4634 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4637 * FIXME IPS should be fine as long as one plane is
4638 * enabled, but in practice it seems to have problems
4639 * when going from primary only to sprite only and vice
4642 hsw_disable_ips(intel_crtc);
4645 /* FIXME get rid of this and use pre_plane_update */
4647 intel_pre_disable_primary_noatomic(struct drm_crtc *crtc)
4649 struct drm_device *dev = crtc->dev;
4650 struct drm_i915_private *dev_priv = dev->dev_private;
4651 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4652 int pipe = intel_crtc->pipe;
4654 intel_pre_disable_primary(crtc);
4657 * Vblank time updates from the shadow to live plane control register
4658 * are blocked if the memory self-refresh mode is active at that
4659 * moment. So to make sure the plane gets truly disabled, disable
4660 * first the self-refresh mode. The self-refresh enable bit in turn
4661 * will be checked/applied by the HW only at the next frame start
4662 * event which is after the vblank start event, so we need to have a
4663 * wait-for-vblank between disabling the plane and the pipe.
4665 if (HAS_GMCH_DISPLAY(dev)) {
4666 intel_set_memory_cxsr(dev_priv, false);
4667 dev_priv->wm.vlv.cxsr = false;
4668 intel_wait_for_vblank(dev, pipe);
4672 static void intel_post_plane_update(struct intel_crtc_state *old_crtc_state)
4674 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
4675 struct drm_atomic_state *old_state = old_crtc_state->base.state;
4676 struct intel_crtc_state *pipe_config =
4677 to_intel_crtc_state(crtc->base.state);
4678 struct drm_device *dev = crtc->base.dev;
4679 struct drm_plane *primary = crtc->base.primary;
4680 struct drm_plane_state *old_pri_state =
4681 drm_atomic_get_existing_plane_state(old_state, primary);
4683 intel_frontbuffer_flip(dev, pipe_config->fb_bits);
4685 crtc->wm.cxsr_allowed = true;
4687 if (pipe_config->update_wm_post && pipe_config->base.active)
4688 intel_update_watermarks(&crtc->base);
4690 if (old_pri_state) {
4691 struct intel_plane_state *primary_state =
4692 to_intel_plane_state(primary->state);
4693 struct intel_plane_state *old_primary_state =
4694 to_intel_plane_state(old_pri_state);
4696 intel_fbc_post_update(crtc);
4698 if (primary_state->visible &&
4699 (needs_modeset(&pipe_config->base) ||
4700 !old_primary_state->visible))
4701 intel_post_enable_primary(&crtc->base);
4705 static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state)
4707 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
4708 struct drm_device *dev = crtc->base.dev;
4709 struct drm_i915_private *dev_priv = dev->dev_private;
4710 struct intel_crtc_state *pipe_config =
4711 to_intel_crtc_state(crtc->base.state);
4712 struct drm_atomic_state *old_state = old_crtc_state->base.state;
4713 struct drm_plane *primary = crtc->base.primary;
4714 struct drm_plane_state *old_pri_state =
4715 drm_atomic_get_existing_plane_state(old_state, primary);
4716 bool modeset = needs_modeset(&pipe_config->base);
4718 if (old_pri_state) {
4719 struct intel_plane_state *primary_state =
4720 to_intel_plane_state(primary->state);
4721 struct intel_plane_state *old_primary_state =
4722 to_intel_plane_state(old_pri_state);
4724 intel_fbc_pre_update(crtc);
4726 if (old_primary_state->visible &&
4727 (modeset || !primary_state->visible))
4728 intel_pre_disable_primary(&crtc->base);
4731 if (pipe_config->disable_cxsr) {
4732 crtc->wm.cxsr_allowed = false;
4735 * Vblank time updates from the shadow to live plane control register
4736 * are blocked if the memory self-refresh mode is active at that
4737 * moment. So to make sure the plane gets truly disabled, disable
4738 * first the self-refresh mode. The self-refresh enable bit in turn
4739 * will be checked/applied by the HW only at the next frame start
4740 * event which is after the vblank start event, so we need to have a
4741 * wait-for-vblank between disabling the plane and the pipe.
4743 if (old_crtc_state->base.active) {
4744 intel_set_memory_cxsr(dev_priv, false);
4745 dev_priv->wm.vlv.cxsr = false;
4746 intel_wait_for_vblank(dev, crtc->pipe);
4751 * IVB workaround: must disable low power watermarks for at least
4752 * one frame before enabling scaling. LP watermarks can be re-enabled
4753 * when scaling is disabled.
4755 * WaCxSRDisabledForSpriteScaling:ivb
4757 if (pipe_config->disable_lp_wm) {
4758 ilk_disable_lp_wm(dev);
4759 intel_wait_for_vblank(dev, crtc->pipe);
4763 * If we're doing a modeset, we're done. No need to do any pre-vblank
4764 * watermark programming here.
4766 if (needs_modeset(&pipe_config->base))
4770 * For platforms that support atomic watermarks, program the
4771 * 'intermediate' watermarks immediately. On pre-gen9 platforms, these
4772 * will be the intermediate values that are safe for both pre- and
4773 * post- vblank; when vblank happens, the 'active' values will be set
4774 * to the final 'target' values and we'll do this again to get the
4775 * optimal watermarks. For gen9+ platforms, the values we program here
4776 * will be the final target values which will get automatically latched
4777 * at vblank time; no further programming will be necessary.
4779 * If a platform hasn't been transitioned to atomic watermarks yet,
4780 * we'll continue to update watermarks the old way, if flags tell
4783 if (dev_priv->display.initial_watermarks != NULL)
4784 dev_priv->display.initial_watermarks(pipe_config);
4785 else if (pipe_config->update_wm_pre)
4786 intel_update_watermarks(&crtc->base);
4789 static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask)
4791 struct drm_device *dev = crtc->dev;
4792 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4793 struct drm_plane *p;
4794 int pipe = intel_crtc->pipe;
4796 intel_crtc_dpms_overlay_disable(intel_crtc);
4798 drm_for_each_plane_mask(p, dev, plane_mask)
4799 to_intel_plane(p)->disable_plane(p, crtc);
4802 * FIXME: Once we grow proper nuclear flip support out of this we need
4803 * to compute the mask of flip planes precisely. For the time being
4804 * consider this a flip to a NULL plane.
4806 intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
4809 static void ironlake_crtc_enable(struct drm_crtc *crtc)
4811 struct drm_device *dev = crtc->dev;
4812 struct drm_i915_private *dev_priv = dev->dev_private;
4813 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4814 struct intel_encoder *encoder;
4815 int pipe = intel_crtc->pipe;
4817 if (WARN_ON(intel_crtc->active))
4820 if (intel_crtc->config->has_pch_encoder)
4821 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
4823 if (intel_crtc->config->has_pch_encoder)
4824 intel_prepare_shared_dpll(intel_crtc);
4826 if (intel_crtc->config->has_dp_encoder)
4827 intel_dp_set_m_n(intel_crtc, M1_N1);
4829 intel_set_pipe_timings(intel_crtc);
4831 if (intel_crtc->config->has_pch_encoder) {
4832 intel_cpu_transcoder_set_m_n(intel_crtc,
4833 &intel_crtc->config->fdi_m_n, NULL);
4836 ironlake_set_pipeconf(crtc);
4838 intel_crtc->active = true;
4840 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4842 for_each_encoder_on_crtc(dev, crtc, encoder)
4843 if (encoder->pre_enable)
4844 encoder->pre_enable(encoder);
4846 if (intel_crtc->config->has_pch_encoder) {
4847 /* Note: FDI PLL enabling _must_ be done before we enable the
4848 * cpu pipes, hence this is separate from all the other fdi/pch
4850 ironlake_fdi_pll_enable(intel_crtc);
4852 assert_fdi_tx_disabled(dev_priv, pipe);
4853 assert_fdi_rx_disabled(dev_priv, pipe);
4856 ironlake_pfit_enable(intel_crtc);
4859 * On ILK+ LUT must be loaded before the pipe is running but with
4862 intel_crtc_load_lut(crtc);
4864 if (dev_priv->display.initial_watermarks != NULL)
4865 dev_priv->display.initial_watermarks(intel_crtc->config);
4866 intel_enable_pipe(intel_crtc);
4868 if (intel_crtc->config->has_pch_encoder)
4869 ironlake_pch_enable(crtc);
4871 assert_vblank_disabled(crtc);
4872 drm_crtc_vblank_on(crtc);
4874 for_each_encoder_on_crtc(dev, crtc, encoder)
4875 encoder->enable(encoder);
4877 if (HAS_PCH_CPT(dev))
4878 cpt_verify_modeset(dev, intel_crtc->pipe);
4880 /* Must wait for vblank to avoid spurious PCH FIFO underruns */
4881 if (intel_crtc->config->has_pch_encoder)
4882 intel_wait_for_vblank(dev, pipe);
4883 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
4886 /* IPS only exists on ULT machines and is tied to pipe A. */
4887 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
4889 return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
4892 static void haswell_crtc_enable(struct drm_crtc *crtc)
4894 struct drm_device *dev = crtc->dev;
4895 struct drm_i915_private *dev_priv = dev->dev_private;
4896 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4897 struct intel_encoder *encoder;
4898 int pipe = intel_crtc->pipe, hsw_workaround_pipe;
4899 struct intel_crtc_state *pipe_config =
4900 to_intel_crtc_state(crtc->state);
4902 if (WARN_ON(intel_crtc->active))
4905 if (intel_crtc->config->has_pch_encoder)
4906 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
4909 if (intel_crtc->config->shared_dpll)
4910 intel_enable_shared_dpll(intel_crtc);
4912 if (intel_crtc->config->has_dp_encoder)
4913 intel_dp_set_m_n(intel_crtc, M1_N1);
4915 intel_set_pipe_timings(intel_crtc);
4917 if (intel_crtc->config->cpu_transcoder != TRANSCODER_EDP) {
4918 I915_WRITE(PIPE_MULT(intel_crtc->config->cpu_transcoder),
4919 intel_crtc->config->pixel_multiplier - 1);
4922 if (intel_crtc->config->has_pch_encoder) {
4923 intel_cpu_transcoder_set_m_n(intel_crtc,
4924 &intel_crtc->config->fdi_m_n, NULL);
4927 haswell_set_pipeconf(crtc);
4929 intel_set_pipe_csc(crtc);
4931 intel_crtc->active = true;
4933 if (intel_crtc->config->has_pch_encoder)
4934 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4936 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4938 for_each_encoder_on_crtc(dev, crtc, encoder) {
4939 if (encoder->pre_enable)
4940 encoder->pre_enable(encoder);
4943 if (intel_crtc->config->has_pch_encoder)
4944 dev_priv->display.fdi_link_train(crtc);
4946 if (!intel_crtc->config->has_dsi_encoder)
4947 intel_ddi_enable_pipe_clock(intel_crtc);
4949 if (INTEL_INFO(dev)->gen >= 9)
4950 skylake_pfit_enable(intel_crtc);
4952 ironlake_pfit_enable(intel_crtc);
4955 * On ILK+ LUT must be loaded before the pipe is running but with
4958 intel_crtc_load_lut(crtc);
4960 intel_ddi_set_pipe_settings(crtc);
4961 if (!intel_crtc->config->has_dsi_encoder)
4962 intel_ddi_enable_transcoder_func(crtc);
4964 if (dev_priv->display.initial_watermarks != NULL)
4965 dev_priv->display.initial_watermarks(pipe_config);
4967 intel_update_watermarks(crtc);
4968 intel_enable_pipe(intel_crtc);
4970 if (intel_crtc->config->has_pch_encoder)
4971 lpt_pch_enable(crtc);
4973 if (intel_crtc->config->dp_encoder_is_mst)
4974 intel_ddi_set_vc_payload_alloc(crtc, true);
4976 assert_vblank_disabled(crtc);
4977 drm_crtc_vblank_on(crtc);
4979 for_each_encoder_on_crtc(dev, crtc, encoder) {
4980 encoder->enable(encoder);
4981 intel_opregion_notify_encoder(encoder, true);
4984 if (intel_crtc->config->has_pch_encoder) {
4985 intel_wait_for_vblank(dev, pipe);
4986 intel_wait_for_vblank(dev, pipe);
4987 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4988 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
4992 /* If we change the relative order between pipe/planes enabling, we need
4993 * to change the workaround. */
4994 hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
4995 if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
4996 intel_wait_for_vblank(dev, hsw_workaround_pipe);
4997 intel_wait_for_vblank(dev, hsw_workaround_pipe);
5001 static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force)
5003 struct drm_device *dev = crtc->base.dev;
5004 struct drm_i915_private *dev_priv = dev->dev_private;
5005 int pipe = crtc->pipe;
5007 /* To avoid upsetting the power well on haswell only disable the pfit if
5008 * it's in use. The hw state code will make sure we get this right. */
5009 if (force || crtc->config->pch_pfit.enabled) {
5010 I915_WRITE(PF_CTL(pipe), 0);
5011 I915_WRITE(PF_WIN_POS(pipe), 0);
5012 I915_WRITE(PF_WIN_SZ(pipe), 0);
5016 static void ironlake_crtc_disable(struct drm_crtc *crtc)
5018 struct drm_device *dev = crtc->dev;
5019 struct drm_i915_private *dev_priv = dev->dev_private;
5020 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5021 struct intel_encoder *encoder;
5022 int pipe = intel_crtc->pipe;
5024 if (intel_crtc->config->has_pch_encoder)
5025 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
5027 for_each_encoder_on_crtc(dev, crtc, encoder)
5028 encoder->disable(encoder);
5030 drm_crtc_vblank_off(crtc);
5031 assert_vblank_disabled(crtc);
5034 * Sometimes spurious CPU pipe underruns happen when the
5035 * pipe is already disabled, but FDI RX/TX is still enabled.
5036 * Happens at least with VGA+HDMI cloning. Suppress them.
5038 if (intel_crtc->config->has_pch_encoder)
5039 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
5041 intel_disable_pipe(intel_crtc);
5043 ironlake_pfit_disable(intel_crtc, false);
5045 if (intel_crtc->config->has_pch_encoder) {
5046 ironlake_fdi_disable(crtc);
5047 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
5050 for_each_encoder_on_crtc(dev, crtc, encoder)
5051 if (encoder->post_disable)
5052 encoder->post_disable(encoder);
5054 if (intel_crtc->config->has_pch_encoder) {
5055 ironlake_disable_pch_transcoder(dev_priv, pipe);
5057 if (HAS_PCH_CPT(dev)) {
5061 /* disable TRANS_DP_CTL */
5062 reg = TRANS_DP_CTL(pipe);
5063 temp = I915_READ(reg);
5064 temp &= ~(TRANS_DP_OUTPUT_ENABLE |
5065 TRANS_DP_PORT_SEL_MASK);
5066 temp |= TRANS_DP_PORT_SEL_NONE;
5067 I915_WRITE(reg, temp);
5069 /* disable DPLL_SEL */
5070 temp = I915_READ(PCH_DPLL_SEL);
5071 temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
5072 I915_WRITE(PCH_DPLL_SEL, temp);
5075 ironlake_fdi_pll_disable(intel_crtc);
5078 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
5081 static void haswell_crtc_disable(struct drm_crtc *crtc)
5083 struct drm_device *dev = crtc->dev;
5084 struct drm_i915_private *dev_priv = dev->dev_private;
5085 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5086 struct intel_encoder *encoder;
5087 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
5089 if (intel_crtc->config->has_pch_encoder)
5090 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
5093 for_each_encoder_on_crtc(dev, crtc, encoder) {
5094 intel_opregion_notify_encoder(encoder, false);
5095 encoder->disable(encoder);
5098 drm_crtc_vblank_off(crtc);
5099 assert_vblank_disabled(crtc);
5101 intel_disable_pipe(intel_crtc);
5103 if (intel_crtc->config->dp_encoder_is_mst)
5104 intel_ddi_set_vc_payload_alloc(crtc, false);
5106 if (!intel_crtc->config->has_dsi_encoder)
5107 intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
5109 if (INTEL_INFO(dev)->gen >= 9)
5110 skylake_scaler_disable(intel_crtc);
5112 ironlake_pfit_disable(intel_crtc, false);
5114 if (!intel_crtc->config->has_dsi_encoder)
5115 intel_ddi_disable_pipe_clock(intel_crtc);
5117 for_each_encoder_on_crtc(dev, crtc, encoder)
5118 if (encoder->post_disable)
5119 encoder->post_disable(encoder);
5121 if (intel_crtc->config->has_pch_encoder) {
5122 lpt_disable_pch_transcoder(dev_priv);
5123 lpt_disable_iclkip(dev_priv);
5124 intel_ddi_fdi_disable(crtc);
5126 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
5131 static void i9xx_pfit_enable(struct intel_crtc *crtc)
5133 struct drm_device *dev = crtc->base.dev;
5134 struct drm_i915_private *dev_priv = dev->dev_private;
5135 struct intel_crtc_state *pipe_config = crtc->config;
5137 if (!pipe_config->gmch_pfit.control)
5141 * The panel fitter should only be adjusted whilst the pipe is disabled,
5142 * according to register description and PRM.
5144 WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
5145 assert_pipe_disabled(dev_priv, crtc->pipe);
5147 I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
5148 I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
5150 /* Border color in case we don't scale up to the full screen. Black by
5151 * default, change to something else for debugging. */
5152 I915_WRITE(BCLRPAT(crtc->pipe), 0);
5155 static enum intel_display_power_domain port_to_power_domain(enum port port)
5159 return POWER_DOMAIN_PORT_DDI_A_LANES;
5161 return POWER_DOMAIN_PORT_DDI_B_LANES;
5163 return POWER_DOMAIN_PORT_DDI_C_LANES;
5165 return POWER_DOMAIN_PORT_DDI_D_LANES;
5167 return POWER_DOMAIN_PORT_DDI_E_LANES;
5170 return POWER_DOMAIN_PORT_OTHER;
5174 static enum intel_display_power_domain port_to_aux_power_domain(enum port port)
5178 return POWER_DOMAIN_AUX_A;
5180 return POWER_DOMAIN_AUX_B;
5182 return POWER_DOMAIN_AUX_C;
5184 return POWER_DOMAIN_AUX_D;
5186 /* FIXME: Check VBT for actual wiring of PORT E */
5187 return POWER_DOMAIN_AUX_D;
5190 return POWER_DOMAIN_AUX_A;
5194 enum intel_display_power_domain
5195 intel_display_port_power_domain(struct intel_encoder *intel_encoder)
5197 struct drm_device *dev = intel_encoder->base.dev;
5198 struct intel_digital_port *intel_dig_port;
5200 switch (intel_encoder->type) {
5201 case INTEL_OUTPUT_UNKNOWN:
5202 /* Only DDI platforms should ever use this output type */
5203 WARN_ON_ONCE(!HAS_DDI(dev));
5204 case INTEL_OUTPUT_DISPLAYPORT:
5205 case INTEL_OUTPUT_HDMI:
5206 case INTEL_OUTPUT_EDP:
5207 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
5208 return port_to_power_domain(intel_dig_port->port);
5209 case INTEL_OUTPUT_DP_MST:
5210 intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
5211 return port_to_power_domain(intel_dig_port->port);
5212 case INTEL_OUTPUT_ANALOG:
5213 return POWER_DOMAIN_PORT_CRT;
5214 case INTEL_OUTPUT_DSI:
5215 return POWER_DOMAIN_PORT_DSI;
5217 return POWER_DOMAIN_PORT_OTHER;
5221 enum intel_display_power_domain
5222 intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
5224 struct drm_device *dev = intel_encoder->base.dev;
5225 struct intel_digital_port *intel_dig_port;
5227 switch (intel_encoder->type) {
5228 case INTEL_OUTPUT_UNKNOWN:
5229 case INTEL_OUTPUT_HDMI:
5231 * Only DDI platforms should ever use these output types.
5232 * We can get here after the HDMI detect code has already set
5233 * the type of the shared encoder. Since we can't be sure
5234 * what's the status of the given connectors, play safe and
5235 * run the DP detection too.
5237 WARN_ON_ONCE(!HAS_DDI(dev));
5238 case INTEL_OUTPUT_DISPLAYPORT:
5239 case INTEL_OUTPUT_EDP:
5240 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
5241 return port_to_aux_power_domain(intel_dig_port->port);
5242 case INTEL_OUTPUT_DP_MST:
5243 intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
5244 return port_to_aux_power_domain(intel_dig_port->port);
5246 MISSING_CASE(intel_encoder->type);
5247 return POWER_DOMAIN_AUX_A;
5251 static unsigned long get_crtc_power_domains(struct drm_crtc *crtc,
5252 struct intel_crtc_state *crtc_state)
5254 struct drm_device *dev = crtc->dev;
5255 struct drm_encoder *encoder;
5256 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5257 enum pipe pipe = intel_crtc->pipe;
5259 enum transcoder transcoder = crtc_state->cpu_transcoder;
5261 if (!crtc_state->base.active)
5264 mask = BIT(POWER_DOMAIN_PIPE(pipe));
5265 mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder));
5266 if (crtc_state->pch_pfit.enabled ||
5267 crtc_state->pch_pfit.force_thru)
5268 mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
5270 drm_for_each_encoder_mask(encoder, dev, crtc_state->base.encoder_mask) {
5271 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
5273 mask |= BIT(intel_display_port_power_domain(intel_encoder));
5279 static unsigned long
5280 modeset_get_crtc_power_domains(struct drm_crtc *crtc,
5281 struct intel_crtc_state *crtc_state)
5283 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5284 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5285 enum intel_display_power_domain domain;
5286 unsigned long domains, new_domains, old_domains;
5288 old_domains = intel_crtc->enabled_power_domains;
5289 intel_crtc->enabled_power_domains = new_domains =
5290 get_crtc_power_domains(crtc, crtc_state);
5292 domains = new_domains & ~old_domains;
5294 for_each_power_domain(domain, domains)
5295 intel_display_power_get(dev_priv, domain);
5297 return old_domains & ~new_domains;
5300 static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
5301 unsigned long domains)
5303 enum intel_display_power_domain domain;
5305 for_each_power_domain(domain, domains)
5306 intel_display_power_put(dev_priv, domain);
5309 static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
5311 int max_cdclk_freq = dev_priv->max_cdclk_freq;
5313 if (INTEL_INFO(dev_priv)->gen >= 9 ||
5314 IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
5315 return max_cdclk_freq;
5316 else if (IS_CHERRYVIEW(dev_priv))
5317 return max_cdclk_freq*95/100;
5318 else if (INTEL_INFO(dev_priv)->gen < 4)
5319 return 2*max_cdclk_freq*90/100;
5321 return max_cdclk_freq*90/100;
5324 static void intel_update_max_cdclk(struct drm_device *dev)
5326 struct drm_i915_private *dev_priv = dev->dev_private;
5328 if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
5329 u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
5331 if (limit == SKL_DFSM_CDCLK_LIMIT_675)
5332 dev_priv->max_cdclk_freq = 675000;
5333 else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
5334 dev_priv->max_cdclk_freq = 540000;
5335 else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
5336 dev_priv->max_cdclk_freq = 450000;
5338 dev_priv->max_cdclk_freq = 337500;
5339 } else if (IS_BROADWELL(dev)) {
5341 * FIXME with extra cooling we can allow
5342 * 540 MHz for ULX and 675 Mhz for ULT.
5343 * How can we know if extra cooling is
5344 * available? PCI ID, VTB, something else?
5346 if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
5347 dev_priv->max_cdclk_freq = 450000;
5348 else if (IS_BDW_ULX(dev))
5349 dev_priv->max_cdclk_freq = 450000;
5350 else if (IS_BDW_ULT(dev))
5351 dev_priv->max_cdclk_freq = 540000;
5353 dev_priv->max_cdclk_freq = 675000;
5354 } else if (IS_CHERRYVIEW(dev)) {
5355 dev_priv->max_cdclk_freq = 320000;
5356 } else if (IS_VALLEYVIEW(dev)) {
5357 dev_priv->max_cdclk_freq = 400000;
5359 /* otherwise assume cdclk is fixed */
5360 dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
5363 dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
5365 DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
5366 dev_priv->max_cdclk_freq);
5368 DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n",
5369 dev_priv->max_dotclk_freq);
5372 static void intel_update_cdclk(struct drm_device *dev)
5374 struct drm_i915_private *dev_priv = dev->dev_private;
5376 dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
5377 DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
5378 dev_priv->cdclk_freq);
5381 * Program the gmbus_freq based on the cdclk frequency.
5382 * BSpec erroneously claims we should aim for 4MHz, but
5383 * in fact 1MHz is the correct frequency.
5385 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
5387 * Program the gmbus_freq based on the cdclk frequency.
5388 * BSpec erroneously claims we should aim for 4MHz, but
5389 * in fact 1MHz is the correct frequency.
5391 I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
5394 if (dev_priv->max_cdclk_freq == 0)
5395 intel_update_max_cdclk(dev);
5398 static void broxton_set_cdclk(struct drm_device *dev, int frequency)
5400 struct drm_i915_private *dev_priv = dev->dev_private;
5403 uint32_t current_freq;
5406 /* frequency = 19.2MHz * ratio / 2 / div{1,1.5,2,4} */
5407 switch (frequency) {
5409 divider = BXT_CDCLK_CD2X_DIV_SEL_4;
5410 ratio = BXT_DE_PLL_RATIO(60);
5413 divider = BXT_CDCLK_CD2X_DIV_SEL_2;
5414 ratio = BXT_DE_PLL_RATIO(60);
5417 divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
5418 ratio = BXT_DE_PLL_RATIO(60);
5421 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
5422 ratio = BXT_DE_PLL_RATIO(60);
5425 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
5426 ratio = BXT_DE_PLL_RATIO(65);
5430 * Bypass frequency with DE PLL disabled. Init ratio, divider
5431 * to suppress GCC warning.
5437 DRM_ERROR("unsupported CDCLK freq %d", frequency);
5442 mutex_lock(&dev_priv->rps.hw_lock);
5443 /* Inform power controller of upcoming frequency change */
5444 ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
5446 mutex_unlock(&dev_priv->rps.hw_lock);
5449 DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n",
5454 current_freq = I915_READ(CDCLK_CTL) & CDCLK_FREQ_DECIMAL_MASK;
5455 /* convert from .1 fixpoint MHz with -1MHz offset to kHz */
5456 current_freq = current_freq * 500 + 1000;
5459 * DE PLL has to be disabled when
5460 * - setting to 19.2MHz (bypass, PLL isn't used)
5461 * - before setting to 624MHz (PLL needs toggling)
5462 * - before setting to any frequency from 624MHz (PLL needs toggling)
5464 if (frequency == 19200 || frequency == 624000 ||
5465 current_freq == 624000) {
5466 I915_WRITE(BXT_DE_PLL_ENABLE, ~BXT_DE_PLL_PLL_ENABLE);
5468 if (wait_for(!(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK),
5470 DRM_ERROR("timout waiting for DE PLL unlock\n");
5473 if (frequency != 19200) {
5476 val = I915_READ(BXT_DE_PLL_CTL);
5477 val &= ~BXT_DE_PLL_RATIO_MASK;
5479 I915_WRITE(BXT_DE_PLL_CTL, val);
5481 I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
5483 if (wait_for(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK, 1))
5484 DRM_ERROR("timeout waiting for DE PLL lock\n");
5486 val = I915_READ(CDCLK_CTL);
5487 val &= ~BXT_CDCLK_CD2X_DIV_SEL_MASK;
5490 * Disable SSA Precharge when CD clock frequency < 500 MHz,
5493 val &= ~BXT_CDCLK_SSA_PRECHARGE_ENABLE;
5494 if (frequency >= 500000)
5495 val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
5497 val &= ~CDCLK_FREQ_DECIMAL_MASK;
5498 /* convert from kHz to .1 fixpoint MHz with -1MHz offset */
5499 val |= (frequency - 1000) / 500;
5500 I915_WRITE(CDCLK_CTL, val);
5503 mutex_lock(&dev_priv->rps.hw_lock);
5504 ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
5505 DIV_ROUND_UP(frequency, 25000));
5506 mutex_unlock(&dev_priv->rps.hw_lock);
5509 DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n",
5514 intel_update_cdclk(dev);
5517 void broxton_init_cdclk(struct drm_device *dev)
5519 struct drm_i915_private *dev_priv = dev->dev_private;
5523 * NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT
5524 * or else the reset will hang because there is no PCH to respond.
5525 * Move the handshake programming to initialization sequence.
5526 * Previously was left up to BIOS.
5528 val = I915_READ(HSW_NDE_RSTWRN_OPT);
5529 val &= ~RESET_PCH_HANDSHAKE_ENABLE;
5530 I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
5532 /* Enable PG1 for cdclk */
5533 intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
5535 /* check if cd clock is enabled */
5536 if (I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_PLL_ENABLE) {
5537 DRM_DEBUG_KMS("Display already initialized\n");
5543 * - The initial CDCLK needs to be read from VBT.
5544 * Need to make this change after VBT has changes for BXT.
5545 * - check if setting the max (or any) cdclk freq is really necessary
5546 * here, it belongs to modeset time
5548 broxton_set_cdclk(dev, 624000);
5550 I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
5551 POSTING_READ(DBUF_CTL);
5555 if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
5556 DRM_ERROR("DBuf power enable timeout!\n");
5559 void broxton_uninit_cdclk(struct drm_device *dev)
5561 struct drm_i915_private *dev_priv = dev->dev_private;
5563 I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
5564 POSTING_READ(DBUF_CTL);
5568 if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
5569 DRM_ERROR("DBuf power disable timeout!\n");
5571 /* Set minimum (bypass) frequency, in effect turning off the DE PLL */
5572 broxton_set_cdclk(dev, 19200);
5574 intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
5577 static const struct skl_cdclk_entry {
5580 } skl_cdclk_frequencies[] = {
5581 { .freq = 308570, .vco = 8640 },
5582 { .freq = 337500, .vco = 8100 },
5583 { .freq = 432000, .vco = 8640 },
5584 { .freq = 450000, .vco = 8100 },
5585 { .freq = 540000, .vco = 8100 },
5586 { .freq = 617140, .vco = 8640 },
5587 { .freq = 675000, .vco = 8100 },
5590 static unsigned int skl_cdclk_decimal(unsigned int freq)
5592 return (freq - 1000) / 500;
5595 static unsigned int skl_cdclk_get_vco(unsigned int freq)
5599 for (i = 0; i < ARRAY_SIZE(skl_cdclk_frequencies); i++) {
5600 const struct skl_cdclk_entry *e = &skl_cdclk_frequencies[i];
5602 if (e->freq == freq)
5610 skl_dpll0_enable(struct drm_i915_private *dev_priv, unsigned int required_vco)
5612 unsigned int min_freq;
5615 /* select the minimum CDCLK before enabling DPLL 0 */
5616 val = I915_READ(CDCLK_CTL);
5617 val &= ~CDCLK_FREQ_SEL_MASK | ~CDCLK_FREQ_DECIMAL_MASK;
5618 val |= CDCLK_FREQ_337_308;
5620 if (required_vco == 8640)
5625 val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_freq);
5627 I915_WRITE(CDCLK_CTL, val);
5628 POSTING_READ(CDCLK_CTL);
5631 * We always enable DPLL0 with the lowest link rate possible, but still
5632 * taking into account the VCO required to operate the eDP panel at the
5633 * desired frequency. The usual DP link rates operate with a VCO of
5634 * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
5635 * The modeset code is responsible for the selection of the exact link
5636 * rate later on, with the constraint of choosing a frequency that
5637 * works with required_vco.
5639 val = I915_READ(DPLL_CTRL1);
5641 val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
5642 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
5643 val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
5644 if (required_vco == 8640)
5645 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
5648 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
5651 I915_WRITE(DPLL_CTRL1, val);
5652 POSTING_READ(DPLL_CTRL1);
5654 I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
5656 if (wait_for(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK, 5))
5657 DRM_ERROR("DPLL0 not locked\n");
5660 static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
5665 /* inform PCU we want to change CDCLK */
5666 val = SKL_CDCLK_PREPARE_FOR_CHANGE;
5667 mutex_lock(&dev_priv->rps.hw_lock);
5668 ret = sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &val);
5669 mutex_unlock(&dev_priv->rps.hw_lock);
5671 return ret == 0 && (val & SKL_CDCLK_READY_FOR_CHANGE);
5674 static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
5678 for (i = 0; i < 15; i++) {
5679 if (skl_cdclk_pcu_ready(dev_priv))
5687 static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
5689 struct drm_device *dev = dev_priv->dev;
5690 u32 freq_select, pcu_ack;
5692 DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq);
5694 if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
5695 DRM_ERROR("failed to inform PCU about cdclk change\n");
5703 freq_select = CDCLK_FREQ_450_432;
5707 freq_select = CDCLK_FREQ_540;
5713 freq_select = CDCLK_FREQ_337_308;
5718 freq_select = CDCLK_FREQ_675_617;
5723 I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(freq));
5724 POSTING_READ(CDCLK_CTL);
5726 /* inform PCU of the change */
5727 mutex_lock(&dev_priv->rps.hw_lock);
5728 sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
5729 mutex_unlock(&dev_priv->rps.hw_lock);
5731 intel_update_cdclk(dev);
5734 void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
5736 /* disable DBUF power */
5737 I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
5738 POSTING_READ(DBUF_CTL);
5742 if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
5743 DRM_ERROR("DBuf power disable timeout\n");
5746 I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
5747 if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
5748 DRM_ERROR("Couldn't disable DPLL0\n");
5751 void skl_init_cdclk(struct drm_i915_private *dev_priv)
5753 unsigned int required_vco;
5755 /* DPLL0 not enabled (happens on early BIOS versions) */
5756 if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE)) {
5758 required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
5759 skl_dpll0_enable(dev_priv, required_vco);
5762 /* set CDCLK to the frequency the BIOS chose */
5763 skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk);
5765 /* enable DBUF power */
5766 I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
5767 POSTING_READ(DBUF_CTL);
5771 if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
5772 DRM_ERROR("DBuf power enable timeout\n");
5775 int skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
5777 uint32_t lcpll1 = I915_READ(LCPLL1_CTL);
5778 uint32_t cdctl = I915_READ(CDCLK_CTL);
5779 int freq = dev_priv->skl_boot_cdclk;
5782 * check if the pre-os intialized the display
5783 * There is SWF18 scratchpad register defined which is set by the
5784 * pre-os which can be used by the OS drivers to check the status
5786 if ((I915_READ(SWF_ILK(0x18)) & 0x00FFFFFF) == 0)
5789 /* Is PLL enabled and locked ? */
5790 if (!((lcpll1 & LCPLL_PLL_ENABLE) && (lcpll1 & LCPLL_PLL_LOCK)))
5793 /* DPLL okay; verify the cdclock
5795 * Noticed in some instances that the freq selection is correct but
5796 * decimal part is programmed wrong from BIOS where pre-os does not
5797 * enable display. Verify the same as well.
5799 if (cdctl == ((cdctl & CDCLK_FREQ_SEL_MASK) | skl_cdclk_decimal(freq)))
5800 /* All well; nothing to sanitize */
5804 * As of now initialize with max cdclk till
5805 * we get dynamic cdclk support
5807 dev_priv->skl_boot_cdclk = dev_priv->max_cdclk_freq;
5808 skl_init_cdclk(dev_priv);
5810 /* we did have to sanitize */
5814 /* Adjust CDclk dividers to allow high res or save power if possible */
5815 static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
5817 struct drm_i915_private *dev_priv = dev->dev_private;
5820 WARN_ON(dev_priv->display.get_display_clock_speed(dev)
5821 != dev_priv->cdclk_freq);
5823 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
5825 else if (cdclk == 266667)
5830 mutex_lock(&dev_priv->rps.hw_lock);
5831 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
5832 val &= ~DSPFREQGUAR_MASK;
5833 val |= (cmd << DSPFREQGUAR_SHIFT);
5834 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
5835 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
5836 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
5838 DRM_ERROR("timed out waiting for CDclk change\n");
5840 mutex_unlock(&dev_priv->rps.hw_lock);
5842 mutex_lock(&dev_priv->sb_lock);
5844 if (cdclk == 400000) {
5847 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
5849 /* adjust cdclk divider */
5850 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
5851 val &= ~CCK_FREQUENCY_VALUES;
5853 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
5855 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
5856 CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
5858 DRM_ERROR("timed out waiting for CDclk change\n");
5861 /* adjust self-refresh exit latency value */
5862 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
5866 * For high bandwidth configs, we set a higher latency in the bunit
5867 * so that the core display fetch happens in time to avoid underruns.
5869 if (cdclk == 400000)
5870 val |= 4500 / 250; /* 4.5 usec */
5872 val |= 3000 / 250; /* 3.0 usec */
5873 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
5875 mutex_unlock(&dev_priv->sb_lock);
5877 intel_update_cdclk(dev);
5880 static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
5882 struct drm_i915_private *dev_priv = dev->dev_private;
5885 WARN_ON(dev_priv->display.get_display_clock_speed(dev)
5886 != dev_priv->cdclk_freq);
5895 MISSING_CASE(cdclk);
5900 * Specs are full of misinformation, but testing on actual
5901 * hardware has shown that we just need to write the desired
5902 * CCK divider into the Punit register.
5904 cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
5906 mutex_lock(&dev_priv->rps.hw_lock);
5907 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
5908 val &= ~DSPFREQGUAR_MASK_CHV;
5909 val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
5910 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
5911 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
5912 DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
5914 DRM_ERROR("timed out waiting for CDclk change\n");
5916 mutex_unlock(&dev_priv->rps.hw_lock);
5918 intel_update_cdclk(dev);
5921 static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
5924 int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 333333 : 320000;
5925 int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90;
5928 * Really only a few cases to deal with, as only 4 CDclks are supported:
5931 * 320/333MHz (depends on HPLL freq)
5933 * So we check to see whether we're above 90% (VLV) or 95% (CHV)
5934 * of the lower bin and adjust if needed.
5936 * We seem to get an unstable or solid color picture at 200MHz.
5937 * Not sure what's wrong. For now use 200MHz only when all pipes
5940 if (!IS_CHERRYVIEW(dev_priv) &&
5941 max_pixclk > freq_320*limit/100)
5943 else if (max_pixclk > 266667*limit/100)
5945 else if (max_pixclk > 0)
5951 static int broxton_calc_cdclk(struct drm_i915_private *dev_priv,
5956 * - remove the guardband, it's not needed on BXT
5957 * - set 19.2MHz bypass frequency if there are no active pipes
5959 if (max_pixclk > 576000*9/10)
5961 else if (max_pixclk > 384000*9/10)
5963 else if (max_pixclk > 288000*9/10)
5965 else if (max_pixclk > 144000*9/10)
5971 /* Compute the max pixel clock for new configuration. */
5972 static int intel_mode_max_pixclk(struct drm_device *dev,
5973 struct drm_atomic_state *state)
5975 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
5976 struct drm_i915_private *dev_priv = dev->dev_private;
5977 struct drm_crtc *crtc;
5978 struct drm_crtc_state *crtc_state;
5979 unsigned max_pixclk = 0, i;
5982 memcpy(intel_state->min_pixclk, dev_priv->min_pixclk,
5983 sizeof(intel_state->min_pixclk));
5985 for_each_crtc_in_state(state, crtc, crtc_state, i) {
5988 if (crtc_state->enable)
5989 pixclk = crtc_state->adjusted_mode.crtc_clock;
5991 intel_state->min_pixclk[i] = pixclk;
5994 for_each_pipe(dev_priv, pipe)
5995 max_pixclk = max(intel_state->min_pixclk[pipe], max_pixclk);
6000 static int valleyview_modeset_calc_cdclk(struct drm_atomic_state *state)
6002 struct drm_device *dev = state->dev;
6003 struct drm_i915_private *dev_priv = dev->dev_private;
6004 int max_pixclk = intel_mode_max_pixclk(dev, state);
6005 struct intel_atomic_state *intel_state =
6006 to_intel_atomic_state(state);
6011 intel_state->cdclk = intel_state->dev_cdclk =
6012 valleyview_calc_cdclk(dev_priv, max_pixclk);
6014 if (!intel_state->active_crtcs)
6015 intel_state->dev_cdclk = valleyview_calc_cdclk(dev_priv, 0);
6020 static int broxton_modeset_calc_cdclk(struct drm_atomic_state *state)
6022 struct drm_device *dev = state->dev;
6023 struct drm_i915_private *dev_priv = dev->dev_private;
6024 int max_pixclk = intel_mode_max_pixclk(dev, state);
6025 struct intel_atomic_state *intel_state =
6026 to_intel_atomic_state(state);
6031 intel_state->cdclk = intel_state->dev_cdclk =
6032 broxton_calc_cdclk(dev_priv, max_pixclk);
6034 if (!intel_state->active_crtcs)
6035 intel_state->dev_cdclk = broxton_calc_cdclk(dev_priv, 0);
6040 static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
6042 unsigned int credits, default_credits;
6044 if (IS_CHERRYVIEW(dev_priv))
6045 default_credits = PFI_CREDIT(12);
6047 default_credits = PFI_CREDIT(8);
6049 if (dev_priv->cdclk_freq >= dev_priv->czclk_freq) {
6050 /* CHV suggested value is 31 or 63 */
6051 if (IS_CHERRYVIEW(dev_priv))
6052 credits = PFI_CREDIT_63;
6054 credits = PFI_CREDIT(15);
6056 credits = default_credits;
6060 * WA - write default credits before re-programming
6061 * FIXME: should we also set the resend bit here?
6063 I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
6066 I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
6067 credits | PFI_CREDIT_RESEND);
6070 * FIXME is this guaranteed to clear
6071 * immediately or should we poll for it?
6073 WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND);
6076 static void valleyview_modeset_commit_cdclk(struct drm_atomic_state *old_state)
6078 struct drm_device *dev = old_state->dev;
6079 struct drm_i915_private *dev_priv = dev->dev_private;
6080 struct intel_atomic_state *old_intel_state =
6081 to_intel_atomic_state(old_state);
6082 unsigned req_cdclk = old_intel_state->dev_cdclk;
6085 * FIXME: We can end up here with all power domains off, yet
6086 * with a CDCLK frequency other than the minimum. To account
6087 * for this take the PIPE-A power domain, which covers the HW
6088 * blocks needed for the following programming. This can be
6089 * removed once it's guaranteed that we get here either with
6090 * the minimum CDCLK set, or the required power domains
6093 intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
6095 if (IS_CHERRYVIEW(dev))
6096 cherryview_set_cdclk(dev, req_cdclk);
6098 valleyview_set_cdclk(dev, req_cdclk);
6100 vlv_program_pfi_credits(dev_priv);
6102 intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
6105 static void valleyview_crtc_enable(struct drm_crtc *crtc)
6107 struct drm_device *dev = crtc->dev;
6108 struct drm_i915_private *dev_priv = to_i915(dev);
6109 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6110 struct intel_encoder *encoder;
6111 int pipe = intel_crtc->pipe;
6113 if (WARN_ON(intel_crtc->active))
6116 if (intel_crtc->config->has_dp_encoder)
6117 intel_dp_set_m_n(intel_crtc, M1_N1);
6119 intel_set_pipe_timings(intel_crtc);
6121 if (IS_CHERRYVIEW(dev) && pipe == PIPE_B) {
6122 struct drm_i915_private *dev_priv = dev->dev_private;
6124 I915_WRITE(CHV_BLEND(pipe), CHV_BLEND_LEGACY);
6125 I915_WRITE(CHV_CANVAS(pipe), 0);
6128 i9xx_set_pipeconf(intel_crtc);
6130 intel_crtc->active = true;
6132 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6134 for_each_encoder_on_crtc(dev, crtc, encoder)
6135 if (encoder->pre_pll_enable)
6136 encoder->pre_pll_enable(encoder);
6138 if (!intel_crtc->config->has_dsi_encoder) {
6139 if (IS_CHERRYVIEW(dev)) {
6140 chv_prepare_pll(intel_crtc, intel_crtc->config);
6141 chv_enable_pll(intel_crtc, intel_crtc->config);
6143 vlv_prepare_pll(intel_crtc, intel_crtc->config);
6144 vlv_enable_pll(intel_crtc, intel_crtc->config);
6148 for_each_encoder_on_crtc(dev, crtc, encoder)
6149 if (encoder->pre_enable)
6150 encoder->pre_enable(encoder);
6152 i9xx_pfit_enable(intel_crtc);
6154 intel_crtc_load_lut(crtc);
6156 intel_update_watermarks(crtc);
6157 intel_enable_pipe(intel_crtc);
6159 assert_vblank_disabled(crtc);
6160 drm_crtc_vblank_on(crtc);
6162 for_each_encoder_on_crtc(dev, crtc, encoder)
6163 encoder->enable(encoder);
6166 static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
6168 struct drm_device *dev = crtc->base.dev;
6169 struct drm_i915_private *dev_priv = dev->dev_private;
6171 I915_WRITE(FP0(crtc->pipe), crtc->config->dpll_hw_state.fp0);
6172 I915_WRITE(FP1(crtc->pipe), crtc->config->dpll_hw_state.fp1);
6175 static void i9xx_crtc_enable(struct drm_crtc *crtc)
6177 struct drm_device *dev = crtc->dev;
6178 struct drm_i915_private *dev_priv = to_i915(dev);
6179 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6180 struct intel_encoder *encoder;
6181 int pipe = intel_crtc->pipe;
6183 if (WARN_ON(intel_crtc->active))
6186 i9xx_set_pll_dividers(intel_crtc);
6188 if (intel_crtc->config->has_dp_encoder)
6189 intel_dp_set_m_n(intel_crtc, M1_N1);
6191 intel_set_pipe_timings(intel_crtc);
6193 i9xx_set_pipeconf(intel_crtc);
6195 intel_crtc->active = true;
6198 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6200 for_each_encoder_on_crtc(dev, crtc, encoder)
6201 if (encoder->pre_enable)
6202 encoder->pre_enable(encoder);
6204 i9xx_enable_pll(intel_crtc);
6206 i9xx_pfit_enable(intel_crtc);
6208 intel_crtc_load_lut(crtc);
6210 intel_update_watermarks(crtc);
6211 intel_enable_pipe(intel_crtc);
6213 assert_vblank_disabled(crtc);
6214 drm_crtc_vblank_on(crtc);
6216 for_each_encoder_on_crtc(dev, crtc, encoder)
6217 encoder->enable(encoder);
6220 static void i9xx_pfit_disable(struct intel_crtc *crtc)
6222 struct drm_device *dev = crtc->base.dev;
6223 struct drm_i915_private *dev_priv = dev->dev_private;
6225 if (!crtc->config->gmch_pfit.control)
6228 assert_pipe_disabled(dev_priv, crtc->pipe);
6230 DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
6231 I915_READ(PFIT_CONTROL));
6232 I915_WRITE(PFIT_CONTROL, 0);
6235 static void i9xx_crtc_disable(struct drm_crtc *crtc)
6237 struct drm_device *dev = crtc->dev;
6238 struct drm_i915_private *dev_priv = dev->dev_private;
6239 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6240 struct intel_encoder *encoder;
6241 int pipe = intel_crtc->pipe;
6244 * On gen2 planes are double buffered but the pipe isn't, so we must
6245 * wait for planes to fully turn off before disabling the pipe.
6246 * We also need to wait on all gmch platforms because of the
6247 * self-refresh mode constraint explained above.
6249 intel_wait_for_vblank(dev, pipe);
6251 for_each_encoder_on_crtc(dev, crtc, encoder)
6252 encoder->disable(encoder);
6254 drm_crtc_vblank_off(crtc);
6255 assert_vblank_disabled(crtc);
6257 intel_disable_pipe(intel_crtc);
6259 i9xx_pfit_disable(intel_crtc);
6261 for_each_encoder_on_crtc(dev, crtc, encoder)
6262 if (encoder->post_disable)
6263 encoder->post_disable(encoder);
6265 if (!intel_crtc->config->has_dsi_encoder) {
6266 if (IS_CHERRYVIEW(dev))
6267 chv_disable_pll(dev_priv, pipe);
6268 else if (IS_VALLEYVIEW(dev))
6269 vlv_disable_pll(dev_priv, pipe);
6271 i9xx_disable_pll(intel_crtc);
6274 for_each_encoder_on_crtc(dev, crtc, encoder)
6275 if (encoder->post_pll_disable)
6276 encoder->post_pll_disable(encoder);
6279 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
6282 static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
6284 struct intel_encoder *encoder;
6285 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6286 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
6287 enum intel_display_power_domain domain;
6288 unsigned long domains;
6290 if (!intel_crtc->active)
6293 if (to_intel_plane_state(crtc->primary->state)->visible) {
6294 WARN_ON(intel_crtc->unpin_work);
6296 intel_pre_disable_primary_noatomic(crtc);
6298 intel_crtc_disable_planes(crtc, 1 << drm_plane_index(crtc->primary));
6299 to_intel_plane_state(crtc->primary->state)->visible = false;
6302 dev_priv->display.crtc_disable(crtc);
6304 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was enabled, now disabled\n",
6307 WARN_ON(drm_atomic_set_mode_for_crtc(crtc->state, NULL) < 0);
6308 crtc->state->active = false;
6309 intel_crtc->active = false;
6310 crtc->enabled = false;
6311 crtc->state->connector_mask = 0;
6312 crtc->state->encoder_mask = 0;
6314 for_each_encoder_on_crtc(crtc->dev, crtc, encoder)
6315 encoder->base.crtc = NULL;
6317 intel_fbc_disable(intel_crtc);
6318 intel_update_watermarks(crtc);
6319 intel_disable_shared_dpll(intel_crtc);
6321 domains = intel_crtc->enabled_power_domains;
6322 for_each_power_domain(domain, domains)
6323 intel_display_power_put(dev_priv, domain);
6324 intel_crtc->enabled_power_domains = 0;
6326 dev_priv->active_crtcs &= ~(1 << intel_crtc->pipe);
6327 dev_priv->min_pixclk[intel_crtc->pipe] = 0;
6331 * turn all crtc's off, but do not adjust state
6332 * This has to be paired with a call to intel_modeset_setup_hw_state.
6334 int intel_display_suspend(struct drm_device *dev)
6336 struct drm_i915_private *dev_priv = to_i915(dev);
6337 struct drm_atomic_state *state;
6340 state = drm_atomic_helper_suspend(dev);
6341 ret = PTR_ERR_OR_ZERO(state);
6343 DRM_ERROR("Suspending crtc's failed with %i\n", ret);
6345 dev_priv->modeset_restore_state = state;
6349 void intel_encoder_destroy(struct drm_encoder *encoder)
6351 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
6353 drm_encoder_cleanup(encoder);
6354 kfree(intel_encoder);
6357 /* Cross check the actual hw state with our own modeset state tracking (and it's
6358 * internal consistency). */
6359 static void intel_connector_check_state(struct intel_connector *connector)
6361 struct drm_crtc *crtc = connector->base.state->crtc;
6363 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
6364 connector->base.base.id,
6365 connector->base.name);
6367 if (connector->get_hw_state(connector)) {
6368 struct intel_encoder *encoder = connector->encoder;
6369 struct drm_connector_state *conn_state = connector->base.state;
6371 I915_STATE_WARN(!crtc,
6372 "connector enabled without attached crtc\n");
6377 I915_STATE_WARN(!crtc->state->active,
6378 "connector is active, but attached crtc isn't\n");
6380 if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
6383 I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
6384 "atomic encoder doesn't match attached encoder\n");
6386 I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
6387 "attached encoder crtc differs from connector crtc\n");
6389 I915_STATE_WARN(crtc && crtc->state->active,
6390 "attached crtc is active, but connector isn't\n");
6391 I915_STATE_WARN(!crtc && connector->base.state->best_encoder,
6392 "best encoder set without crtc!\n");
6396 int intel_connector_init(struct intel_connector *connector)
6398 drm_atomic_helper_connector_reset(&connector->base);
6400 if (!connector->base.state)
6406 struct intel_connector *intel_connector_alloc(void)
6408 struct intel_connector *connector;
6410 connector = kzalloc(sizeof *connector, GFP_KERNEL);
6414 if (intel_connector_init(connector) < 0) {
6422 /* Simple connector->get_hw_state implementation for encoders that support only
6423 * one connector and no cloning and hence the encoder state determines the state
6424 * of the connector. */
6425 bool intel_connector_get_hw_state(struct intel_connector *connector)
6428 struct intel_encoder *encoder = connector->encoder;
6430 return encoder->get_hw_state(encoder, &pipe);
6433 static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
6435 if (crtc_state->base.enable && crtc_state->has_pch_encoder)
6436 return crtc_state->fdi_lanes;
6441 static int ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
6442 struct intel_crtc_state *pipe_config)
6444 struct drm_atomic_state *state = pipe_config->base.state;
6445 struct intel_crtc *other_crtc;
6446 struct intel_crtc_state *other_crtc_state;
6448 DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
6449 pipe_name(pipe), pipe_config->fdi_lanes);
6450 if (pipe_config->fdi_lanes > 4) {
6451 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
6452 pipe_name(pipe), pipe_config->fdi_lanes);
6456 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
6457 if (pipe_config->fdi_lanes > 2) {
6458 DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
6459 pipe_config->fdi_lanes);
6466 if (INTEL_INFO(dev)->num_pipes == 2)
6469 /* Ivybridge 3 pipe is really complicated */
6474 if (pipe_config->fdi_lanes <= 2)
6477 other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_C));
6479 intel_atomic_get_crtc_state(state, other_crtc);
6480 if (IS_ERR(other_crtc_state))
6481 return PTR_ERR(other_crtc_state);
6483 if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
6484 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
6485 pipe_name(pipe), pipe_config->fdi_lanes);
6490 if (pipe_config->fdi_lanes > 2) {
6491 DRM_DEBUG_KMS("only 2 lanes on pipe %c: required %i lanes\n",
6492 pipe_name(pipe), pipe_config->fdi_lanes);
6496 other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_B));
6498 intel_atomic_get_crtc_state(state, other_crtc);
6499 if (IS_ERR(other_crtc_state))
6500 return PTR_ERR(other_crtc_state);
6502 if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
6503 DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
6513 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
6514 struct intel_crtc_state *pipe_config)
6516 struct drm_device *dev = intel_crtc->base.dev;
6517 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
6518 int lane, link_bw, fdi_dotclock, ret;
6519 bool needs_recompute = false;
6522 /* FDI is a binary signal running at ~2.7GHz, encoding
6523 * each output octet as 10 bits. The actual frequency
6524 * is stored as a divider into a 100MHz clock, and the
6525 * mode pixel clock is stored in units of 1KHz.
6526 * Hence the bw of each lane in terms of the mode signal
6529 link_bw = intel_fdi_link_freq(to_i915(dev), pipe_config);
6531 fdi_dotclock = adjusted_mode->crtc_clock;
6533 lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
6534 pipe_config->pipe_bpp);
6536 pipe_config->fdi_lanes = lane;
6538 intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
6539 link_bw, &pipe_config->fdi_m_n);
6541 ret = ironlake_check_fdi_lanes(dev, intel_crtc->pipe, pipe_config);
6542 if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
6543 pipe_config->pipe_bpp -= 2*3;
6544 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
6545 pipe_config->pipe_bpp);
6546 needs_recompute = true;
6547 pipe_config->bw_constrained = true;
6552 if (needs_recompute)
6558 static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
6559 struct intel_crtc_state *pipe_config)
6561 if (pipe_config->pipe_bpp > 24)
6564 /* HSW can handle pixel rate up to cdclk? */
6565 if (IS_HASWELL(dev_priv->dev))
6569 * We compare against max which means we must take
6570 * the increased cdclk requirement into account when
6571 * calculating the new cdclk.
6573 * Should measure whether using a lower cdclk w/o IPS
6575 return ilk_pipe_pixel_rate(pipe_config) <=
6576 dev_priv->max_cdclk_freq * 95 / 100;
6579 static void hsw_compute_ips_config(struct intel_crtc *crtc,
6580 struct intel_crtc_state *pipe_config)
6582 struct drm_device *dev = crtc->base.dev;
6583 struct drm_i915_private *dev_priv = dev->dev_private;
6585 pipe_config->ips_enabled = i915.enable_ips &&
6586 hsw_crtc_supports_ips(crtc) &&
6587 pipe_config_supports_ips(dev_priv, pipe_config);
6590 static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc)
6592 const struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6594 /* GDG double wide on either pipe, otherwise pipe A only */
6595 return INTEL_INFO(dev_priv)->gen < 4 &&
6596 (crtc->pipe == PIPE_A || IS_I915G(dev_priv));
6599 static int intel_crtc_compute_config(struct intel_crtc *crtc,
6600 struct intel_crtc_state *pipe_config)
6602 struct drm_device *dev = crtc->base.dev;
6603 struct drm_i915_private *dev_priv = dev->dev_private;
6604 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
6606 /* FIXME should check pixel clock limits on all platforms */
6607 if (INTEL_INFO(dev)->gen < 4) {
6608 int clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
6611 * Enable double wide mode when the dot clock
6612 * is > 90% of the (display) core speed.
6614 if (intel_crtc_supports_double_wide(crtc) &&
6615 adjusted_mode->crtc_clock > clock_limit) {
6617 pipe_config->double_wide = true;
6620 if (adjusted_mode->crtc_clock > clock_limit) {
6621 DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
6622 adjusted_mode->crtc_clock, clock_limit,
6623 yesno(pipe_config->double_wide));
6629 * Pipe horizontal size must be even in:
6631 * - LVDS dual channel mode
6632 * - Double wide pipe
6634 if ((intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_LVDS) &&
6635 intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
6636 pipe_config->pipe_src_w &= ~1;
6638 /* Cantiga+ cannot handle modes with a hsync front porch of 0.
6639 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
6641 if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
6642 adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
6646 hsw_compute_ips_config(crtc, pipe_config);
6648 if (pipe_config->has_pch_encoder)
6649 return ironlake_fdi_compute_config(crtc, pipe_config);
6654 static int skylake_get_display_clock_speed(struct drm_device *dev)
6656 struct drm_i915_private *dev_priv = to_i915(dev);
6657 uint32_t lcpll1 = I915_READ(LCPLL1_CTL);
6658 uint32_t cdctl = I915_READ(CDCLK_CTL);
6661 if (!(lcpll1 & LCPLL_PLL_ENABLE))
6662 return 24000; /* 24MHz is the cd freq with NSSC ref */
6664 if ((cdctl & CDCLK_FREQ_SEL_MASK) == CDCLK_FREQ_540)
6667 linkrate = (I915_READ(DPLL_CTRL1) &
6668 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) >> 1;
6670 if (linkrate == DPLL_CTRL1_LINK_RATE_2160 ||
6671 linkrate == DPLL_CTRL1_LINK_RATE_1080) {
6673 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
6674 case CDCLK_FREQ_450_432:
6676 case CDCLK_FREQ_337_308:
6678 case CDCLK_FREQ_675_617:
6681 WARN(1, "Unknown cd freq selection\n");
6685 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
6686 case CDCLK_FREQ_450_432:
6688 case CDCLK_FREQ_337_308:
6690 case CDCLK_FREQ_675_617:
6693 WARN(1, "Unknown cd freq selection\n");
6697 /* error case, do as if DPLL0 isn't enabled */
6701 static int broxton_get_display_clock_speed(struct drm_device *dev)
6703 struct drm_i915_private *dev_priv = to_i915(dev);
6704 uint32_t cdctl = I915_READ(CDCLK_CTL);
6705 uint32_t pll_ratio = I915_READ(BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
6706 uint32_t pll_enab = I915_READ(BXT_DE_PLL_ENABLE);
6709 if (!(pll_enab & BXT_DE_PLL_PLL_ENABLE))
6712 cdclk = 19200 * pll_ratio / 2;
6714 switch (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) {
6715 case BXT_CDCLK_CD2X_DIV_SEL_1:
6716 return cdclk; /* 576MHz or 624MHz */
6717 case BXT_CDCLK_CD2X_DIV_SEL_1_5:
6718 return cdclk * 2 / 3; /* 384MHz */
6719 case BXT_CDCLK_CD2X_DIV_SEL_2:
6720 return cdclk / 2; /* 288MHz */
6721 case BXT_CDCLK_CD2X_DIV_SEL_4:
6722 return cdclk / 4; /* 144MHz */
6725 /* error case, do as if DE PLL isn't enabled */
6729 static int broadwell_get_display_clock_speed(struct drm_device *dev)
6731 struct drm_i915_private *dev_priv = dev->dev_private;
6732 uint32_t lcpll = I915_READ(LCPLL_CTL);
6733 uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
6735 if (lcpll & LCPLL_CD_SOURCE_FCLK)
6737 else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
6739 else if (freq == LCPLL_CLK_FREQ_450)
6741 else if (freq == LCPLL_CLK_FREQ_54O_BDW)
6743 else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
6749 static int haswell_get_display_clock_speed(struct drm_device *dev)
6751 struct drm_i915_private *dev_priv = dev->dev_private;
6752 uint32_t lcpll = I915_READ(LCPLL_CTL);
6753 uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
6755 if (lcpll & LCPLL_CD_SOURCE_FCLK)
6757 else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
6759 else if (freq == LCPLL_CLK_FREQ_450)
6761 else if (IS_HSW_ULT(dev))
6767 static int valleyview_get_display_clock_speed(struct drm_device *dev)
6769 return vlv_get_cck_clock_hpll(to_i915(dev), "cdclk",
6770 CCK_DISPLAY_CLOCK_CONTROL);
6773 static int ilk_get_display_clock_speed(struct drm_device *dev)
6778 static int i945_get_display_clock_speed(struct drm_device *dev)
6783 static int i915_get_display_clock_speed(struct drm_device *dev)
6788 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
6793 static int pnv_get_display_clock_speed(struct drm_device *dev)
6797 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
6799 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
6800 case GC_DISPLAY_CLOCK_267_MHZ_PNV:
6802 case GC_DISPLAY_CLOCK_333_MHZ_PNV:
6804 case GC_DISPLAY_CLOCK_444_MHZ_PNV:
6806 case GC_DISPLAY_CLOCK_200_MHZ_PNV:
6809 DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
6810 case GC_DISPLAY_CLOCK_133_MHZ_PNV:
6812 case GC_DISPLAY_CLOCK_167_MHZ_PNV:
6817 static int i915gm_get_display_clock_speed(struct drm_device *dev)
6821 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
6823 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
6826 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
6827 case GC_DISPLAY_CLOCK_333_MHZ:
6830 case GC_DISPLAY_CLOCK_190_200_MHZ:
6836 static int i865_get_display_clock_speed(struct drm_device *dev)
6841 static int i85x_get_display_clock_speed(struct drm_device *dev)
6846 * 852GM/852GMV only supports 133 MHz and the HPLLCC
6847 * encoding is different :(
6848 * FIXME is this the right way to detect 852GM/852GMV?
6850 if (dev->pdev->revision == 0x1)
6853 pci_bus_read_config_word(dev->pdev->bus,
6854 PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
6856 /* Assume that the hardware is in the high speed state. This
6857 * should be the default.
6859 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
6860 case GC_CLOCK_133_200:
6861 case GC_CLOCK_133_200_2:
6862 case GC_CLOCK_100_200:
6864 case GC_CLOCK_166_250:
6866 case GC_CLOCK_100_133:
6868 case GC_CLOCK_133_266:
6869 case GC_CLOCK_133_266_2:
6870 case GC_CLOCK_166_266:
6874 /* Shouldn't happen */
6878 static int i830_get_display_clock_speed(struct drm_device *dev)
6883 static unsigned int intel_hpll_vco(struct drm_device *dev)
6885 struct drm_i915_private *dev_priv = dev->dev_private;
6886 static const unsigned int blb_vco[8] = {
6893 static const unsigned int pnv_vco[8] = {
6900 static const unsigned int cl_vco[8] = {
6909 static const unsigned int elk_vco[8] = {
6915 static const unsigned int ctg_vco[8] = {
6923 const unsigned int *vco_table;
6927 /* FIXME other chipsets? */
6929 vco_table = ctg_vco;
6930 else if (IS_G4X(dev))
6931 vco_table = elk_vco;
6932 else if (IS_CRESTLINE(dev))
6934 else if (IS_PINEVIEW(dev))
6935 vco_table = pnv_vco;
6936 else if (IS_G33(dev))
6937 vco_table = blb_vco;
6941 tmp = I915_READ(IS_MOBILE(dev) ? HPLLVCO_MOBILE : HPLLVCO);
6943 vco = vco_table[tmp & 0x7];
6945 DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp);
6947 DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco);
6952 static int gm45_get_display_clock_speed(struct drm_device *dev)
6954 unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
6957 pci_read_config_word(dev->pdev, GCFGC, &tmp);
6959 cdclk_sel = (tmp >> 12) & 0x1;
6965 return cdclk_sel ? 333333 : 222222;
6967 return cdclk_sel ? 320000 : 228571;
6969 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", vco, tmp);
6974 static int i965gm_get_display_clock_speed(struct drm_device *dev)
6976 static const uint8_t div_3200[] = { 16, 10, 8 };
6977 static const uint8_t div_4000[] = { 20, 12, 10 };
6978 static const uint8_t div_5333[] = { 24, 16, 14 };
6979 const uint8_t *div_table;
6980 unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
6983 pci_read_config_word(dev->pdev, GCFGC, &tmp);
6985 cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
6987 if (cdclk_sel >= ARRAY_SIZE(div_3200))
6992 div_table = div_3200;
6995 div_table = div_4000;
6998 div_table = div_5333;
7004 return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
7007 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", vco, tmp);
7011 static int g33_get_display_clock_speed(struct drm_device *dev)
7013 static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 };
7014 static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 };
7015 static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 };
7016 static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 };
7017 const uint8_t *div_table;
7018 unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
7021 pci_read_config_word(dev->pdev, GCFGC, &tmp);
7023 cdclk_sel = (tmp >> 4) & 0x7;
7025 if (cdclk_sel >= ARRAY_SIZE(div_3200))
7030 div_table = div_3200;
7033 div_table = div_4000;
7036 div_table = div_4800;
7039 div_table = div_5333;
7045 return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
7048 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", vco, tmp);
7053 intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
7055 while (*num > DATA_LINK_M_N_MASK ||
7056 *den > DATA_LINK_M_N_MASK) {
7062 static void compute_m_n(unsigned int m, unsigned int n,
7063 uint32_t *ret_m, uint32_t *ret_n)
7065 *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
7066 *ret_m = div_u64((uint64_t) m * *ret_n, n);
7067 intel_reduce_m_n_ratio(ret_m, ret_n);
7071 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
7072 int pixel_clock, int link_clock,
7073 struct intel_link_m_n *m_n)
7077 compute_m_n(bits_per_pixel * pixel_clock,
7078 link_clock * nlanes * 8,
7079 &m_n->gmch_m, &m_n->gmch_n);
7081 compute_m_n(pixel_clock, link_clock,
7082 &m_n->link_m, &m_n->link_n);
7085 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
7087 if (i915.panel_use_ssc >= 0)
7088 return i915.panel_use_ssc != 0;
7089 return dev_priv->vbt.lvds_use_ssc
7090 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
7093 static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
7096 struct drm_device *dev = crtc_state->base.crtc->dev;
7097 struct drm_i915_private *dev_priv = dev->dev_private;
7100 WARN_ON(!crtc_state->base.state);
7102 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev) || IS_BROXTON(dev)) {
7104 } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7105 intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
7106 refclk = dev_priv->vbt.lvds_ssc_freq;
7107 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7108 } else if (!IS_GEN2(dev)) {
7117 static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
7119 return (1 << dpll->n) << 16 | dpll->m2;
7122 static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
7124 return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
7127 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
7128 struct intel_crtc_state *crtc_state,
7129 intel_clock_t *reduced_clock)
7131 struct drm_device *dev = crtc->base.dev;
7134 if (IS_PINEVIEW(dev)) {
7135 fp = pnv_dpll_compute_fp(&crtc_state->dpll);
7137 fp2 = pnv_dpll_compute_fp(reduced_clock);
7139 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
7141 fp2 = i9xx_dpll_compute_fp(reduced_clock);
7144 crtc_state->dpll_hw_state.fp0 = fp;
7146 crtc->lowfreq_avail = false;
7147 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7149 crtc_state->dpll_hw_state.fp1 = fp2;
7150 crtc->lowfreq_avail = true;
7152 crtc_state->dpll_hw_state.fp1 = fp;
7156 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
7162 * PLLB opamp always calibrates to max value of 0x3f, force enable it
7163 * and set it to a reasonable value instead.
7165 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
7166 reg_val &= 0xffffff00;
7167 reg_val |= 0x00000030;
7168 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
7170 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
7171 reg_val &= 0x8cffffff;
7172 reg_val = 0x8c000000;
7173 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
7175 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
7176 reg_val &= 0xffffff00;
7177 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
7179 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
7180 reg_val &= 0x00ffffff;
7181 reg_val |= 0xb0000000;
7182 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
7185 static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
7186 struct intel_link_m_n *m_n)
7188 struct drm_device *dev = crtc->base.dev;
7189 struct drm_i915_private *dev_priv = dev->dev_private;
7190 int pipe = crtc->pipe;
7192 I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
7193 I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
7194 I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
7195 I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
7198 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
7199 struct intel_link_m_n *m_n,
7200 struct intel_link_m_n *m2_n2)
7202 struct drm_device *dev = crtc->base.dev;
7203 struct drm_i915_private *dev_priv = dev->dev_private;
7204 int pipe = crtc->pipe;
7205 enum transcoder transcoder = crtc->config->cpu_transcoder;
7207 if (INTEL_INFO(dev)->gen >= 5) {
7208 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
7209 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
7210 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
7211 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
7212 /* M2_N2 registers to be set only for gen < 8 (M2_N2 available
7213 * for gen < 8) and if DRRS is supported (to make sure the
7214 * registers are not unnecessarily accessed).
7216 if (m2_n2 && (IS_CHERRYVIEW(dev) || INTEL_INFO(dev)->gen < 8) &&
7217 crtc->config->has_drrs) {
7218 I915_WRITE(PIPE_DATA_M2(transcoder),
7219 TU_SIZE(m2_n2->tu) | m2_n2->gmch_m);
7220 I915_WRITE(PIPE_DATA_N2(transcoder), m2_n2->gmch_n);
7221 I915_WRITE(PIPE_LINK_M2(transcoder), m2_n2->link_m);
7222 I915_WRITE(PIPE_LINK_N2(transcoder), m2_n2->link_n);
7225 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
7226 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
7227 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
7228 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
7232 void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n)
7234 struct intel_link_m_n *dp_m_n, *dp_m2_n2 = NULL;
7237 dp_m_n = &crtc->config->dp_m_n;
7238 dp_m2_n2 = &crtc->config->dp_m2_n2;
7239 } else if (m_n == M2_N2) {
7242 * M2_N2 registers are not supported. Hence m2_n2 divider value
7243 * needs to be programmed into M1_N1.
7245 dp_m_n = &crtc->config->dp_m2_n2;
7247 DRM_ERROR("Unsupported divider value\n");
7251 if (crtc->config->has_pch_encoder)
7252 intel_pch_transcoder_set_m_n(crtc, &crtc->config->dp_m_n);
7254 intel_cpu_transcoder_set_m_n(crtc, dp_m_n, dp_m2_n2);
7257 static void vlv_compute_dpll(struct intel_crtc *crtc,
7258 struct intel_crtc_state *pipe_config)
7263 * Enable DPIO clock input. We should never disable the reference
7264 * clock for pipe B, since VGA hotplug / manual detection depends
7267 dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REF_CLK_ENABLE_VLV |
7268 DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_REF_CLK_VLV;
7269 /* We should never disable this, set it here for state tracking */
7270 if (crtc->pipe == PIPE_B)
7271 dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
7272 dpll |= DPLL_VCO_ENABLE;
7273 pipe_config->dpll_hw_state.dpll = dpll;
7275 dpll_md = (pipe_config->pixel_multiplier - 1)
7276 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7277 pipe_config->dpll_hw_state.dpll_md = dpll_md;
7280 static void vlv_prepare_pll(struct intel_crtc *crtc,
7281 const struct intel_crtc_state *pipe_config)
7283 struct drm_device *dev = crtc->base.dev;
7284 struct drm_i915_private *dev_priv = dev->dev_private;
7285 int pipe = crtc->pipe;
7287 u32 bestn, bestm1, bestm2, bestp1, bestp2;
7288 u32 coreclk, reg_val;
7290 mutex_lock(&dev_priv->sb_lock);
7292 bestn = pipe_config->dpll.n;
7293 bestm1 = pipe_config->dpll.m1;
7294 bestm2 = pipe_config->dpll.m2;
7295 bestp1 = pipe_config->dpll.p1;
7296 bestp2 = pipe_config->dpll.p2;
7298 /* See eDP HDMI DPIO driver vbios notes doc */
7300 /* PLL B needs special handling */
7302 vlv_pllb_recal_opamp(dev_priv, pipe);
7304 /* Set up Tx target for periodic Rcomp update */
7305 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
7307 /* Disable target IRef on PLL */
7308 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
7309 reg_val &= 0x00ffffff;
7310 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
7312 /* Disable fast lock */
7313 vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
7315 /* Set idtafcrecal before PLL is enabled */
7316 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
7317 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
7318 mdiv |= ((bestn << DPIO_N_SHIFT));
7319 mdiv |= (1 << DPIO_K_SHIFT);
7322 * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
7323 * but we don't support that).
7324 * Note: don't use the DAC post divider as it seems unstable.
7326 mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
7327 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
7329 mdiv |= DPIO_ENABLE_CALIBRATION;
7330 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
7332 /* Set HBR and RBR LPF coefficients */
7333 if (pipe_config->port_clock == 162000 ||
7334 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG) ||
7335 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
7336 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
7339 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
7342 if (pipe_config->has_dp_encoder) {
7343 /* Use SSC source */
7345 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7348 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7350 } else { /* HDMI or VGA */
7351 /* Use bend source */
7353 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7356 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7360 coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
7361 coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
7362 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
7363 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
7364 coreclk |= 0x01000000;
7365 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
7367 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
7368 mutex_unlock(&dev_priv->sb_lock);
7371 static void chv_compute_dpll(struct intel_crtc *crtc,
7372 struct intel_crtc_state *pipe_config)
7374 pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
7375 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
7377 if (crtc->pipe != PIPE_A)
7378 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
7380 pipe_config->dpll_hw_state.dpll_md =
7381 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7384 static void chv_prepare_pll(struct intel_crtc *crtc,
7385 const struct intel_crtc_state *pipe_config)
7387 struct drm_device *dev = crtc->base.dev;
7388 struct drm_i915_private *dev_priv = dev->dev_private;
7389 int pipe = crtc->pipe;
7390 i915_reg_t dpll_reg = DPLL(crtc->pipe);
7391 enum dpio_channel port = vlv_pipe_to_channel(pipe);
7392 u32 loopfilter, tribuf_calcntr;
7393 u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
7397 bestn = pipe_config->dpll.n;
7398 bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
7399 bestm1 = pipe_config->dpll.m1;
7400 bestm2 = pipe_config->dpll.m2 >> 22;
7401 bestp1 = pipe_config->dpll.p1;
7402 bestp2 = pipe_config->dpll.p2;
7403 vco = pipe_config->dpll.vco;
7408 * Enable Refclk and SSC
7410 I915_WRITE(dpll_reg,
7411 pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
7413 mutex_lock(&dev_priv->sb_lock);
7415 /* p1 and p2 divider */
7416 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
7417 5 << DPIO_CHV_S1_DIV_SHIFT |
7418 bestp1 << DPIO_CHV_P1_DIV_SHIFT |
7419 bestp2 << DPIO_CHV_P2_DIV_SHIFT |
7420 1 << DPIO_CHV_K_DIV_SHIFT);
7422 /* Feedback post-divider - m2 */
7423 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
7425 /* Feedback refclk divider - n and m1 */
7426 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
7427 DPIO_CHV_M1_DIV_BY_2 |
7428 1 << DPIO_CHV_N_DIV_SHIFT);
7430 /* M2 fraction division */
7431 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
7433 /* M2 fraction division enable */
7434 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
7435 dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
7436 dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
7438 dpio_val |= DPIO_CHV_FRAC_DIV_EN;
7439 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
7441 /* Program digital lock detect threshold */
7442 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
7443 dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
7444 DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
7445 dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
7447 dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
7448 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
7451 if (vco == 5400000) {
7452 loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
7453 loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
7454 loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
7455 tribuf_calcntr = 0x9;
7456 } else if (vco <= 6200000) {
7457 loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
7458 loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
7459 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7460 tribuf_calcntr = 0x9;
7461 } else if (vco <= 6480000) {
7462 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
7463 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
7464 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7465 tribuf_calcntr = 0x8;
7467 /* Not supported. Apply the same limits as in the max case */
7468 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
7469 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
7470 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7473 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
7475 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
7476 dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
7477 dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
7478 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);
7481 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
7482 vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
7485 mutex_unlock(&dev_priv->sb_lock);
7489 * vlv_force_pll_on - forcibly enable just the PLL
7490 * @dev_priv: i915 private structure
7491 * @pipe: pipe PLL to enable
7492 * @dpll: PLL configuration
7494 * Enable the PLL for @pipe using the supplied @dpll config. To be used
7495 * in cases where we need the PLL enabled even when @pipe is not going to
7498 int vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
7499 const struct dpll *dpll)
7501 struct intel_crtc *crtc =
7502 to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe));
7503 struct intel_crtc_state *pipe_config;
7505 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
7509 pipe_config->base.crtc = &crtc->base;
7510 pipe_config->pixel_multiplier = 1;
7511 pipe_config->dpll = *dpll;
7513 if (IS_CHERRYVIEW(dev)) {
7514 chv_compute_dpll(crtc, pipe_config);
7515 chv_prepare_pll(crtc, pipe_config);
7516 chv_enable_pll(crtc, pipe_config);
7518 vlv_compute_dpll(crtc, pipe_config);
7519 vlv_prepare_pll(crtc, pipe_config);
7520 vlv_enable_pll(crtc, pipe_config);
7529 * vlv_force_pll_off - forcibly disable just the PLL
7530 * @dev_priv: i915 private structure
7531 * @pipe: pipe PLL to disable
7533 * Disable the PLL for @pipe. To be used in cases where we need
7534 * the PLL enabled even when @pipe is not going to be enabled.
7536 void vlv_force_pll_off(struct drm_device *dev, enum pipe pipe)
7538 if (IS_CHERRYVIEW(dev))
7539 chv_disable_pll(to_i915(dev), pipe);
7541 vlv_disable_pll(to_i915(dev), pipe);
7544 static void i9xx_compute_dpll(struct intel_crtc *crtc,
7545 struct intel_crtc_state *crtc_state,
7546 intel_clock_t *reduced_clock,
7549 struct drm_device *dev = crtc->base.dev;
7550 struct drm_i915_private *dev_priv = dev->dev_private;
7553 struct dpll *clock = &crtc_state->dpll;
7555 i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
7557 is_sdvo = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO) ||
7558 intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI);
7560 dpll = DPLL_VGA_MODE_DIS;
7562 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
7563 dpll |= DPLLB_MODE_LVDS;
7565 dpll |= DPLLB_MODE_DAC_SERIAL;
7567 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
7568 dpll |= (crtc_state->pixel_multiplier - 1)
7569 << SDVO_MULTIPLIER_SHIFT_HIRES;
7573 dpll |= DPLL_SDVO_HIGH_SPEED;
7575 if (crtc_state->has_dp_encoder)
7576 dpll |= DPLL_SDVO_HIGH_SPEED;
7578 /* compute bitmask from p1 value */
7579 if (IS_PINEVIEW(dev))
7580 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
7582 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7583 if (IS_G4X(dev) && reduced_clock)
7584 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
7586 switch (clock->p2) {
7588 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
7591 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
7594 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
7597 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
7600 if (INTEL_INFO(dev)->gen >= 4)
7601 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
7603 if (crtc_state->sdvo_tv_clock)
7604 dpll |= PLL_REF_INPUT_TVCLKINBC;
7605 else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7606 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
7607 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
7609 dpll |= PLL_REF_INPUT_DREFCLK;
7611 dpll |= DPLL_VCO_ENABLE;
7612 crtc_state->dpll_hw_state.dpll = dpll;
7614 if (INTEL_INFO(dev)->gen >= 4) {
7615 u32 dpll_md = (crtc_state->pixel_multiplier - 1)
7616 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7617 crtc_state->dpll_hw_state.dpll_md = dpll_md;
7621 static void i8xx_compute_dpll(struct intel_crtc *crtc,
7622 struct intel_crtc_state *crtc_state,
7623 intel_clock_t *reduced_clock,
7626 struct drm_device *dev = crtc->base.dev;
7627 struct drm_i915_private *dev_priv = dev->dev_private;
7629 struct dpll *clock = &crtc_state->dpll;
7631 i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
7633 dpll = DPLL_VGA_MODE_DIS;
7635 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7636 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7639 dpll |= PLL_P1_DIVIDE_BY_TWO;
7641 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7643 dpll |= PLL_P2_DIVIDE_BY_4;
7646 if (!IS_I830(dev) && intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
7647 dpll |= DPLL_DVO_2X_MODE;
7649 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7650 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
7651 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
7653 dpll |= PLL_REF_INPUT_DREFCLK;
7655 dpll |= DPLL_VCO_ENABLE;
7656 crtc_state->dpll_hw_state.dpll = dpll;
7659 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
7661 struct drm_device *dev = intel_crtc->base.dev;
7662 struct drm_i915_private *dev_priv = dev->dev_private;
7663 enum pipe pipe = intel_crtc->pipe;
7664 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
7665 const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode;
7666 uint32_t crtc_vtotal, crtc_vblank_end;
7669 /* We need to be careful not to changed the adjusted mode, for otherwise
7670 * the hw state checker will get angry at the mismatch. */
7671 crtc_vtotal = adjusted_mode->crtc_vtotal;
7672 crtc_vblank_end = adjusted_mode->crtc_vblank_end;
7674 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
7675 /* the chip adds 2 halflines automatically */
7677 crtc_vblank_end -= 1;
7679 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
7680 vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
7682 vsyncshift = adjusted_mode->crtc_hsync_start -
7683 adjusted_mode->crtc_htotal / 2;
7685 vsyncshift += adjusted_mode->crtc_htotal;
7688 if (INTEL_INFO(dev)->gen > 3)
7689 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
7691 I915_WRITE(HTOTAL(cpu_transcoder),
7692 (adjusted_mode->crtc_hdisplay - 1) |
7693 ((adjusted_mode->crtc_htotal - 1) << 16));
7694 I915_WRITE(HBLANK(cpu_transcoder),
7695 (adjusted_mode->crtc_hblank_start - 1) |
7696 ((adjusted_mode->crtc_hblank_end - 1) << 16));
7697 I915_WRITE(HSYNC(cpu_transcoder),
7698 (adjusted_mode->crtc_hsync_start - 1) |
7699 ((adjusted_mode->crtc_hsync_end - 1) << 16));
7701 I915_WRITE(VTOTAL(cpu_transcoder),
7702 (adjusted_mode->crtc_vdisplay - 1) |
7703 ((crtc_vtotal - 1) << 16));
7704 I915_WRITE(VBLANK(cpu_transcoder),
7705 (adjusted_mode->crtc_vblank_start - 1) |
7706 ((crtc_vblank_end - 1) << 16));
7707 I915_WRITE(VSYNC(cpu_transcoder),
7708 (adjusted_mode->crtc_vsync_start - 1) |
7709 ((adjusted_mode->crtc_vsync_end - 1) << 16));
7711 /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
7712 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
7713 * documented on the DDI_FUNC_CTL register description, EDP Input Select
7715 if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
7716 (pipe == PIPE_B || pipe == PIPE_C))
7717 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
7719 /* pipesrc controls the size that is scaled from, which should
7720 * always be the user's requested size.
7722 I915_WRITE(PIPESRC(pipe),
7723 ((intel_crtc->config->pipe_src_w - 1) << 16) |
7724 (intel_crtc->config->pipe_src_h - 1));
7727 static void intel_get_pipe_timings(struct intel_crtc *crtc,
7728 struct intel_crtc_state *pipe_config)
7730 struct drm_device *dev = crtc->base.dev;
7731 struct drm_i915_private *dev_priv = dev->dev_private;
7732 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
7735 tmp = I915_READ(HTOTAL(cpu_transcoder));
7736 pipe_config->base.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
7737 pipe_config->base.adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
7738 tmp = I915_READ(HBLANK(cpu_transcoder));
7739 pipe_config->base.adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
7740 pipe_config->base.adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
7741 tmp = I915_READ(HSYNC(cpu_transcoder));
7742 pipe_config->base.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
7743 pipe_config->base.adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
7745 tmp = I915_READ(VTOTAL(cpu_transcoder));
7746 pipe_config->base.adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
7747 pipe_config->base.adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
7748 tmp = I915_READ(VBLANK(cpu_transcoder));
7749 pipe_config->base.adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
7750 pipe_config->base.adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
7751 tmp = I915_READ(VSYNC(cpu_transcoder));
7752 pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
7753 pipe_config->base.adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
7755 if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
7756 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
7757 pipe_config->base.adjusted_mode.crtc_vtotal += 1;
7758 pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
7761 tmp = I915_READ(PIPESRC(crtc->pipe));
7762 pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
7763 pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
7765 pipe_config->base.mode.vdisplay = pipe_config->pipe_src_h;
7766 pipe_config->base.mode.hdisplay = pipe_config->pipe_src_w;
7769 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
7770 struct intel_crtc_state *pipe_config)
7772 mode->hdisplay = pipe_config->base.adjusted_mode.crtc_hdisplay;
7773 mode->htotal = pipe_config->base.adjusted_mode.crtc_htotal;
7774 mode->hsync_start = pipe_config->base.adjusted_mode.crtc_hsync_start;
7775 mode->hsync_end = pipe_config->base.adjusted_mode.crtc_hsync_end;
7777 mode->vdisplay = pipe_config->base.adjusted_mode.crtc_vdisplay;
7778 mode->vtotal = pipe_config->base.adjusted_mode.crtc_vtotal;
7779 mode->vsync_start = pipe_config->base.adjusted_mode.crtc_vsync_start;
7780 mode->vsync_end = pipe_config->base.adjusted_mode.crtc_vsync_end;
7782 mode->flags = pipe_config->base.adjusted_mode.flags;
7783 mode->type = DRM_MODE_TYPE_DRIVER;
7785 mode->clock = pipe_config->base.adjusted_mode.crtc_clock;
7786 mode->flags |= pipe_config->base.adjusted_mode.flags;
7788 mode->hsync = drm_mode_hsync(mode);
7789 mode->vrefresh = drm_mode_vrefresh(mode);
7790 drm_mode_set_name(mode);
7793 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
7795 struct drm_device *dev = intel_crtc->base.dev;
7796 struct drm_i915_private *dev_priv = dev->dev_private;
7801 if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
7802 (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
7803 pipeconf |= I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE;
7805 if (intel_crtc->config->double_wide)
7806 pipeconf |= PIPECONF_DOUBLE_WIDE;
7808 /* only g4x and later have fancy bpc/dither controls */
7809 if (IS_G4X(dev) || IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
7810 /* Bspec claims that we can't use dithering for 30bpp pipes. */
7811 if (intel_crtc->config->dither && intel_crtc->config->pipe_bpp != 30)
7812 pipeconf |= PIPECONF_DITHER_EN |
7813 PIPECONF_DITHER_TYPE_SP;
7815 switch (intel_crtc->config->pipe_bpp) {
7817 pipeconf |= PIPECONF_6BPC;
7820 pipeconf |= PIPECONF_8BPC;
7823 pipeconf |= PIPECONF_10BPC;
7826 /* Case prevented by intel_choose_pipe_bpp_dither. */
7831 if (HAS_PIPE_CXSR(dev)) {
7832 if (intel_crtc->lowfreq_avail) {
7833 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
7834 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
7836 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
7840 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
7841 if (INTEL_INFO(dev)->gen < 4 ||
7842 intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
7843 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
7845 pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
7847 pipeconf |= PIPECONF_PROGRESSIVE;
7849 if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) &&
7850 intel_crtc->config->limited_color_range)
7851 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
7853 I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
7854 POSTING_READ(PIPECONF(intel_crtc->pipe));
7857 static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
7858 struct intel_crtc_state *crtc_state)
7860 struct drm_device *dev = crtc->base.dev;
7861 struct drm_i915_private *dev_priv = dev->dev_private;
7862 int refclk, num_connectors = 0;
7863 intel_clock_t clock;
7865 const intel_limit_t *limit;
7866 struct drm_atomic_state *state = crtc_state->base.state;
7867 struct drm_connector *connector;
7868 struct drm_connector_state *connector_state;
7871 memset(&crtc_state->dpll_hw_state, 0,
7872 sizeof(crtc_state->dpll_hw_state));
7874 if (crtc_state->has_dsi_encoder)
7877 for_each_connector_in_state(state, connector, connector_state, i) {
7878 if (connector_state->crtc == &crtc->base)
7882 if (!crtc_state->clock_set) {
7883 refclk = i9xx_get_refclk(crtc_state, num_connectors);
7886 * Returns a set of divisors for the desired target clock with
7887 * the given refclk, or FALSE. The returned values represent
7888 * the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
7891 limit = intel_limit(crtc_state, refclk);
7892 ok = dev_priv->display.find_dpll(limit, crtc_state,
7893 crtc_state->port_clock,
7894 refclk, NULL, &clock);
7896 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7900 /* Compat-code for transition, will disappear. */
7901 crtc_state->dpll.n = clock.n;
7902 crtc_state->dpll.m1 = clock.m1;
7903 crtc_state->dpll.m2 = clock.m2;
7904 crtc_state->dpll.p1 = clock.p1;
7905 crtc_state->dpll.p2 = clock.p2;
7909 i8xx_compute_dpll(crtc, crtc_state, NULL,
7911 } else if (IS_CHERRYVIEW(dev)) {
7912 chv_compute_dpll(crtc, crtc_state);
7913 } else if (IS_VALLEYVIEW(dev)) {
7914 vlv_compute_dpll(crtc, crtc_state);
7916 i9xx_compute_dpll(crtc, crtc_state, NULL,
7923 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
7924 struct intel_crtc_state *pipe_config)
7926 struct drm_device *dev = crtc->base.dev;
7927 struct drm_i915_private *dev_priv = dev->dev_private;
7930 if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev)))
7933 tmp = I915_READ(PFIT_CONTROL);
7934 if (!(tmp & PFIT_ENABLE))
7937 /* Check whether the pfit is attached to our pipe. */
7938 if (INTEL_INFO(dev)->gen < 4) {
7939 if (crtc->pipe != PIPE_B)
7942 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
7946 pipe_config->gmch_pfit.control = tmp;
7947 pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
7948 if (INTEL_INFO(dev)->gen < 5)
7949 pipe_config->gmch_pfit.lvds_border_bits =
7950 I915_READ(LVDS) & LVDS_BORDER_ENABLE;
7953 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
7954 struct intel_crtc_state *pipe_config)
7956 struct drm_device *dev = crtc->base.dev;
7957 struct drm_i915_private *dev_priv = dev->dev_private;
7958 int pipe = pipe_config->cpu_transcoder;
7959 intel_clock_t clock;
7961 int refclk = 100000;
7963 /* In case of MIPI DPLL will not even be used */
7964 if (!(pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE))
7967 mutex_lock(&dev_priv->sb_lock);
7968 mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
7969 mutex_unlock(&dev_priv->sb_lock);
7971 clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
7972 clock.m2 = mdiv & DPIO_M2DIV_MASK;
7973 clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
7974 clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
7975 clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
7977 pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock);
7981 i9xx_get_initial_plane_config(struct intel_crtc *crtc,
7982 struct intel_initial_plane_config *plane_config)
7984 struct drm_device *dev = crtc->base.dev;
7985 struct drm_i915_private *dev_priv = dev->dev_private;
7986 u32 val, base, offset;
7987 int pipe = crtc->pipe, plane = crtc->plane;
7988 int fourcc, pixel_format;
7989 unsigned int aligned_height;
7990 struct drm_framebuffer *fb;
7991 struct intel_framebuffer *intel_fb;
7993 val = I915_READ(DSPCNTR(plane));
7994 if (!(val & DISPLAY_PLANE_ENABLE))
7997 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
7999 DRM_DEBUG_KMS("failed to alloc fb\n");
8003 fb = &intel_fb->base;
8005 if (INTEL_INFO(dev)->gen >= 4) {
8006 if (val & DISPPLANE_TILED) {
8007 plane_config->tiling = I915_TILING_X;
8008 fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
8012 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
8013 fourcc = i9xx_format_to_fourcc(pixel_format);
8014 fb->pixel_format = fourcc;
8015 fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
8017 if (INTEL_INFO(dev)->gen >= 4) {
8018 if (plane_config->tiling)
8019 offset = I915_READ(DSPTILEOFF(plane));
8021 offset = I915_READ(DSPLINOFF(plane));
8022 base = I915_READ(DSPSURF(plane)) & 0xfffff000;
8024 base = I915_READ(DSPADDR(plane));
8026 plane_config->base = base;
8028 val = I915_READ(PIPESRC(pipe));
8029 fb->width = ((val >> 16) & 0xfff) + 1;
8030 fb->height = ((val >> 0) & 0xfff) + 1;
8032 val = I915_READ(DSPSTRIDE(pipe));
8033 fb->pitches[0] = val & 0xffffffc0;
8035 aligned_height = intel_fb_align_height(dev, fb->height,
8039 plane_config->size = fb->pitches[0] * aligned_height;
8041 DRM_DEBUG_KMS("pipe/plane %c/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
8042 pipe_name(pipe), plane, fb->width, fb->height,
8043 fb->bits_per_pixel, base, fb->pitches[0],
8044 plane_config->size);
8046 plane_config->fb = intel_fb;
8049 static void chv_crtc_clock_get(struct intel_crtc *crtc,
8050 struct intel_crtc_state *pipe_config)
8052 struct drm_device *dev = crtc->base.dev;
8053 struct drm_i915_private *dev_priv = dev->dev_private;
8054 int pipe = pipe_config->cpu_transcoder;
8055 enum dpio_channel port = vlv_pipe_to_channel(pipe);
8056 intel_clock_t clock;
8057 u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
8058 int refclk = 100000;
8060 mutex_lock(&dev_priv->sb_lock);
8061 cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
8062 pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
8063 pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
8064 pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
8065 pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
8066 mutex_unlock(&dev_priv->sb_lock);
8068 clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
8069 clock.m2 = (pll_dw0 & 0xff) << 22;
8070 if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
8071 clock.m2 |= pll_dw2 & 0x3fffff;
8072 clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
8073 clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
8074 clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
8076 pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
8079 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
8080 struct intel_crtc_state *pipe_config)
8082 struct drm_device *dev = crtc->base.dev;
8083 struct drm_i915_private *dev_priv = dev->dev_private;
8084 enum intel_display_power_domain power_domain;
8088 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
8089 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
8092 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
8093 pipe_config->shared_dpll = NULL;
8097 tmp = I915_READ(PIPECONF(crtc->pipe));
8098 if (!(tmp & PIPECONF_ENABLE))
8101 if (IS_G4X(dev) || IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
8102 switch (tmp & PIPECONF_BPC_MASK) {
8104 pipe_config->pipe_bpp = 18;
8107 pipe_config->pipe_bpp = 24;
8109 case PIPECONF_10BPC:
8110 pipe_config->pipe_bpp = 30;
8117 if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) &&
8118 (tmp & PIPECONF_COLOR_RANGE_SELECT))
8119 pipe_config->limited_color_range = true;
8121 if (INTEL_INFO(dev)->gen < 4)
8122 pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
8124 intel_get_pipe_timings(crtc, pipe_config);
8126 i9xx_get_pfit_config(crtc, pipe_config);
8128 if (INTEL_INFO(dev)->gen >= 4) {
8129 tmp = I915_READ(DPLL_MD(crtc->pipe));
8130 pipe_config->pixel_multiplier =
8131 ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
8132 >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
8133 pipe_config->dpll_hw_state.dpll_md = tmp;
8134 } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
8135 tmp = I915_READ(DPLL(crtc->pipe));
8136 pipe_config->pixel_multiplier =
8137 ((tmp & SDVO_MULTIPLIER_MASK)
8138 >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
8140 /* Note that on i915G/GM the pixel multiplier is in the sdvo
8141 * port and will be fixed up in the encoder->get_config
8143 pipe_config->pixel_multiplier = 1;
8145 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
8146 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
8148 * DPLL_DVO_2X_MODE must be enabled for both DPLLs
8149 * on 830. Filter it out here so that we don't
8150 * report errors due to that.
8153 pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
8155 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
8156 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
8158 /* Mask out read-only status bits. */
8159 pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
8160 DPLL_PORTC_READY_MASK |
8161 DPLL_PORTB_READY_MASK);
8164 if (IS_CHERRYVIEW(dev))
8165 chv_crtc_clock_get(crtc, pipe_config);
8166 else if (IS_VALLEYVIEW(dev))
8167 vlv_crtc_clock_get(crtc, pipe_config);
8169 i9xx_crtc_clock_get(crtc, pipe_config);
8172 * Normally the dotclock is filled in by the encoder .get_config()
8173 * but in case the pipe is enabled w/o any ports we need a sane
8176 pipe_config->base.adjusted_mode.crtc_clock =
8177 pipe_config->port_clock / pipe_config->pixel_multiplier;
8182 intel_display_power_put(dev_priv, power_domain);
8187 static void ironlake_init_pch_refclk(struct drm_device *dev)
8189 struct drm_i915_private *dev_priv = dev->dev_private;
8190 struct intel_encoder *encoder;
8192 bool has_lvds = false;
8193 bool has_cpu_edp = false;
8194 bool has_panel = false;
8195 bool has_ck505 = false;
8196 bool can_ssc = false;
8198 /* We need to take the global config into account */
8199 for_each_intel_encoder(dev, encoder) {
8200 switch (encoder->type) {
8201 case INTEL_OUTPUT_LVDS:
8205 case INTEL_OUTPUT_EDP:
8207 if (enc_to_dig_port(&encoder->base)->port == PORT_A)
8215 if (HAS_PCH_IBX(dev)) {
8216 has_ck505 = dev_priv->vbt.display_clock_mode;
8217 can_ssc = has_ck505;
8223 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n",
8224 has_panel, has_lvds, has_ck505);
8226 /* Ironlake: try to setup display ref clock before DPLL
8227 * enabling. This is only under driver's control after
8228 * PCH B stepping, previous chipset stepping should be
8229 * ignoring this setting.
8231 val = I915_READ(PCH_DREF_CONTROL);
8233 /* As we must carefully and slowly disable/enable each source in turn,
8234 * compute the final state we want first and check if we need to
8235 * make any changes at all.
8238 final &= ~DREF_NONSPREAD_SOURCE_MASK;
8240 final |= DREF_NONSPREAD_CK505_ENABLE;
8242 final |= DREF_NONSPREAD_SOURCE_ENABLE;
8244 final &= ~DREF_SSC_SOURCE_MASK;
8245 final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8246 final &= ~DREF_SSC1_ENABLE;
8249 final |= DREF_SSC_SOURCE_ENABLE;
8251 if (intel_panel_use_ssc(dev_priv) && can_ssc)
8252 final |= DREF_SSC1_ENABLE;
8255 if (intel_panel_use_ssc(dev_priv) && can_ssc)
8256 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
8258 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
8260 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8262 final |= DREF_SSC_SOURCE_DISABLE;
8263 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8269 /* Always enable nonspread source */
8270 val &= ~DREF_NONSPREAD_SOURCE_MASK;
8273 val |= DREF_NONSPREAD_CK505_ENABLE;
8275 val |= DREF_NONSPREAD_SOURCE_ENABLE;
8278 val &= ~DREF_SSC_SOURCE_MASK;
8279 val |= DREF_SSC_SOURCE_ENABLE;
8281 /* SSC must be turned on before enabling the CPU output */
8282 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
8283 DRM_DEBUG_KMS("Using SSC on panel\n");
8284 val |= DREF_SSC1_ENABLE;
8286 val &= ~DREF_SSC1_ENABLE;
8288 /* Get SSC going before enabling the outputs */
8289 I915_WRITE(PCH_DREF_CONTROL, val);
8290 POSTING_READ(PCH_DREF_CONTROL);
8293 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8295 /* Enable CPU source on CPU attached eDP */
8297 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
8298 DRM_DEBUG_KMS("Using SSC on eDP\n");
8299 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
8301 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
8303 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8305 I915_WRITE(PCH_DREF_CONTROL, val);
8306 POSTING_READ(PCH_DREF_CONTROL);
8309 DRM_DEBUG_KMS("Disabling SSC entirely\n");
8311 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8313 /* Turn off CPU output */
8314 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8316 I915_WRITE(PCH_DREF_CONTROL, val);
8317 POSTING_READ(PCH_DREF_CONTROL);
8320 /* Turn off the SSC source */
8321 val &= ~DREF_SSC_SOURCE_MASK;
8322 val |= DREF_SSC_SOURCE_DISABLE;
8325 val &= ~DREF_SSC1_ENABLE;
8327 I915_WRITE(PCH_DREF_CONTROL, val);
8328 POSTING_READ(PCH_DREF_CONTROL);
8332 BUG_ON(val != final);
8335 static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
8339 tmp = I915_READ(SOUTH_CHICKEN2);
8340 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
8341 I915_WRITE(SOUTH_CHICKEN2, tmp);
8343 if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
8344 FDI_MPHY_IOSFSB_RESET_STATUS, 100))
8345 DRM_ERROR("FDI mPHY reset assert timeout\n");
8347 tmp = I915_READ(SOUTH_CHICKEN2);
8348 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
8349 I915_WRITE(SOUTH_CHICKEN2, tmp);
8351 if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
8352 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
8353 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
8356 /* WaMPhyProgramming:hsw */
8357 static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
8361 tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
8362 tmp &= ~(0xFF << 24);
8363 tmp |= (0x12 << 24);
8364 intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
8366 tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
8368 intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
8370 tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
8372 intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
8374 tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
8375 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
8376 intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
8378 tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
8379 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
8380 intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
8382 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
8385 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
8387 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
8390 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
8392 tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
8395 intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
8397 tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
8400 intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
8402 tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
8403 tmp &= ~(0xFF << 16);
8404 tmp |= (0x1C << 16);
8405 intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
8407 tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
8408 tmp &= ~(0xFF << 16);
8409 tmp |= (0x1C << 16);
8410 intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
8412 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
8414 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
8416 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
8418 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
8420 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
8421 tmp &= ~(0xF << 28);
8423 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
8425 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
8426 tmp &= ~(0xF << 28);
8428 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
8431 /* Implements 3 different sequences from BSpec chapter "Display iCLK
8432 * Programming" based on the parameters passed:
8433 * - Sequence to enable CLKOUT_DP
8434 * - Sequence to enable CLKOUT_DP without spread
8435 * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
8437 static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
8440 struct drm_i915_private *dev_priv = dev->dev_private;
8443 if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
8445 if (WARN(HAS_PCH_LPT_LP(dev) && with_fdi, "LP PCH doesn't have FDI\n"))
8448 mutex_lock(&dev_priv->sb_lock);
8450 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8451 tmp &= ~SBI_SSCCTL_DISABLE;
8452 tmp |= SBI_SSCCTL_PATHALT;
8453 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8458 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8459 tmp &= ~SBI_SSCCTL_PATHALT;
8460 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8463 lpt_reset_fdi_mphy(dev_priv);
8464 lpt_program_fdi_mphy(dev_priv);
8468 reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
8469 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
8470 tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
8471 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
8473 mutex_unlock(&dev_priv->sb_lock);
8476 /* Sequence to disable CLKOUT_DP */
8477 static void lpt_disable_clkout_dp(struct drm_device *dev)
8479 struct drm_i915_private *dev_priv = dev->dev_private;
8482 mutex_lock(&dev_priv->sb_lock);
8484 reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
8485 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
8486 tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
8487 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
8489 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8490 if (!(tmp & SBI_SSCCTL_DISABLE)) {
8491 if (!(tmp & SBI_SSCCTL_PATHALT)) {
8492 tmp |= SBI_SSCCTL_PATHALT;
8493 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8496 tmp |= SBI_SSCCTL_DISABLE;
8497 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8500 mutex_unlock(&dev_priv->sb_lock);
8503 #define BEND_IDX(steps) ((50 + (steps)) / 5)
8505 static const uint16_t sscdivintphase[] = {
8506 [BEND_IDX( 50)] = 0x3B23,
8507 [BEND_IDX( 45)] = 0x3B23,
8508 [BEND_IDX( 40)] = 0x3C23,
8509 [BEND_IDX( 35)] = 0x3C23,
8510 [BEND_IDX( 30)] = 0x3D23,
8511 [BEND_IDX( 25)] = 0x3D23,
8512 [BEND_IDX( 20)] = 0x3E23,
8513 [BEND_IDX( 15)] = 0x3E23,
8514 [BEND_IDX( 10)] = 0x3F23,
8515 [BEND_IDX( 5)] = 0x3F23,
8516 [BEND_IDX( 0)] = 0x0025,
8517 [BEND_IDX( -5)] = 0x0025,
8518 [BEND_IDX(-10)] = 0x0125,
8519 [BEND_IDX(-15)] = 0x0125,
8520 [BEND_IDX(-20)] = 0x0225,
8521 [BEND_IDX(-25)] = 0x0225,
8522 [BEND_IDX(-30)] = 0x0325,
8523 [BEND_IDX(-35)] = 0x0325,
8524 [BEND_IDX(-40)] = 0x0425,
8525 [BEND_IDX(-45)] = 0x0425,
8526 [BEND_IDX(-50)] = 0x0525,
8531 * steps -50 to 50 inclusive, in steps of 5
8532 * < 0 slow down the clock, > 0 speed up the clock, 0 == no bend (135MHz)
8533 * change in clock period = -(steps / 10) * 5.787 ps
8535 static void lpt_bend_clkout_dp(struct drm_i915_private *dev_priv, int steps)
8538 int idx = BEND_IDX(steps);
8540 if (WARN_ON(steps % 5 != 0))
8543 if (WARN_ON(idx >= ARRAY_SIZE(sscdivintphase)))
8546 mutex_lock(&dev_priv->sb_lock);
8548 if (steps % 10 != 0)
8552 intel_sbi_write(dev_priv, SBI_SSCDITHPHASE, tmp, SBI_ICLK);
8554 tmp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE, SBI_ICLK);
8556 tmp |= sscdivintphase[idx];
8557 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE, tmp, SBI_ICLK);
8559 mutex_unlock(&dev_priv->sb_lock);
8564 static void lpt_init_pch_refclk(struct drm_device *dev)
8566 struct intel_encoder *encoder;
8567 bool has_vga = false;
8569 for_each_intel_encoder(dev, encoder) {
8570 switch (encoder->type) {
8571 case INTEL_OUTPUT_ANALOG:
8580 lpt_bend_clkout_dp(to_i915(dev), 0);
8581 lpt_enable_clkout_dp(dev, true, true);
8583 lpt_disable_clkout_dp(dev);
8588 * Initialize reference clocks when the driver loads
8590 void intel_init_pch_refclk(struct drm_device *dev)
8592 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
8593 ironlake_init_pch_refclk(dev);
8594 else if (HAS_PCH_LPT(dev))
8595 lpt_init_pch_refclk(dev);
8598 static int ironlake_get_refclk(struct intel_crtc_state *crtc_state)
8600 struct drm_device *dev = crtc_state->base.crtc->dev;
8601 struct drm_i915_private *dev_priv = dev->dev_private;
8602 struct drm_atomic_state *state = crtc_state->base.state;
8603 struct drm_connector *connector;
8604 struct drm_connector_state *connector_state;
8605 struct intel_encoder *encoder;
8606 int num_connectors = 0, i;
8607 bool is_lvds = false;
8609 for_each_connector_in_state(state, connector, connector_state, i) {
8610 if (connector_state->crtc != crtc_state->base.crtc)
8613 encoder = to_intel_encoder(connector_state->best_encoder);
8615 switch (encoder->type) {
8616 case INTEL_OUTPUT_LVDS:
8625 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
8626 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
8627 dev_priv->vbt.lvds_ssc_freq);
8628 return dev_priv->vbt.lvds_ssc_freq;
8634 static void ironlake_set_pipeconf(struct drm_crtc *crtc)
8636 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
8637 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8638 int pipe = intel_crtc->pipe;
8643 switch (intel_crtc->config->pipe_bpp) {
8645 val |= PIPECONF_6BPC;
8648 val |= PIPECONF_8BPC;
8651 val |= PIPECONF_10BPC;
8654 val |= PIPECONF_12BPC;
8657 /* Case prevented by intel_choose_pipe_bpp_dither. */
8661 if (intel_crtc->config->dither)
8662 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
8664 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
8665 val |= PIPECONF_INTERLACED_ILK;
8667 val |= PIPECONF_PROGRESSIVE;
8669 if (intel_crtc->config->limited_color_range)
8670 val |= PIPECONF_COLOR_RANGE_SELECT;
8672 I915_WRITE(PIPECONF(pipe), val);
8673 POSTING_READ(PIPECONF(pipe));
8677 * Set up the pipe CSC unit.
8679 * Currently only full range RGB to limited range RGB conversion
8680 * is supported, but eventually this should handle various
8681 * RGB<->YCbCr scenarios as well.
8683 static void intel_set_pipe_csc(struct drm_crtc *crtc)
8685 struct drm_device *dev = crtc->dev;
8686 struct drm_i915_private *dev_priv = dev->dev_private;
8687 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8688 int pipe = intel_crtc->pipe;
8689 uint16_t coeff = 0x7800; /* 1.0 */
8692 * TODO: Check what kind of values actually come out of the pipe
8693 * with these coeff/postoff values and adjust to get the best
8694 * accuracy. Perhaps we even need to take the bpc value into
8698 if (intel_crtc->config->limited_color_range)
8699 coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
8702 * GY/GU and RY/RU should be the other way around according
8703 * to BSpec, but reality doesn't agree. Just set them up in
8704 * a way that results in the correct picture.
8706 I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16);
8707 I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0);
8709 I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff);
8710 I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0);
8712 I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0);
8713 I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16);
8715 I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
8716 I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
8717 I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
8719 if (INTEL_INFO(dev)->gen > 6) {
8720 uint16_t postoff = 0;
8722 if (intel_crtc->config->limited_color_range)
8723 postoff = (16 * (1 << 12) / 255) & 0x1fff;
8725 I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
8726 I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
8727 I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
8729 I915_WRITE(PIPE_CSC_MODE(pipe), 0);
8731 uint32_t mode = CSC_MODE_YUV_TO_RGB;
8733 if (intel_crtc->config->limited_color_range)
8734 mode |= CSC_BLACK_SCREEN_OFFSET;
8736 I915_WRITE(PIPE_CSC_MODE(pipe), mode);
8740 static void haswell_set_pipeconf(struct drm_crtc *crtc)
8742 struct drm_device *dev = crtc->dev;
8743 struct drm_i915_private *dev_priv = dev->dev_private;
8744 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8745 enum pipe pipe = intel_crtc->pipe;
8746 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
8751 if (IS_HASWELL(dev) && intel_crtc->config->dither)
8752 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
8754 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
8755 val |= PIPECONF_INTERLACED_ILK;
8757 val |= PIPECONF_PROGRESSIVE;
8759 I915_WRITE(PIPECONF(cpu_transcoder), val);
8760 POSTING_READ(PIPECONF(cpu_transcoder));
8762 I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
8763 POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
8765 if (IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
8768 switch (intel_crtc->config->pipe_bpp) {
8770 val |= PIPEMISC_DITHER_6_BPC;
8773 val |= PIPEMISC_DITHER_8_BPC;
8776 val |= PIPEMISC_DITHER_10_BPC;
8779 val |= PIPEMISC_DITHER_12_BPC;
8782 /* Case prevented by pipe_config_set_bpp. */
8786 if (intel_crtc->config->dither)
8787 val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
8789 I915_WRITE(PIPEMISC(pipe), val);
8793 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
8794 struct intel_crtc_state *crtc_state,
8795 intel_clock_t *clock,
8796 bool *has_reduced_clock,
8797 intel_clock_t *reduced_clock)
8799 struct drm_device *dev = crtc->dev;
8800 struct drm_i915_private *dev_priv = dev->dev_private;
8802 const intel_limit_t *limit;
8805 refclk = ironlake_get_refclk(crtc_state);
8808 * Returns a set of divisors for the desired target clock with the given
8809 * refclk, or FALSE. The returned values represent the clock equation:
8810 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
8812 limit = intel_limit(crtc_state, refclk);
8813 ret = dev_priv->display.find_dpll(limit, crtc_state,
8814 crtc_state->port_clock,
8815 refclk, NULL, clock);
8822 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
8825 * Account for spread spectrum to avoid
8826 * oversubscribing the link. Max center spread
8827 * is 2.5%; use 5% for safety's sake.
8829 u32 bps = target_clock * bpp * 21 / 20;
8830 return DIV_ROUND_UP(bps, link_bw * 8);
8833 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
8835 return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
8838 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
8839 struct intel_crtc_state *crtc_state,
8841 intel_clock_t *reduced_clock, u32 *fp2)
8843 struct drm_crtc *crtc = &intel_crtc->base;
8844 struct drm_device *dev = crtc->dev;
8845 struct drm_i915_private *dev_priv = dev->dev_private;
8846 struct drm_atomic_state *state = crtc_state->base.state;
8847 struct drm_connector *connector;
8848 struct drm_connector_state *connector_state;
8849 struct intel_encoder *encoder;
8851 int factor, num_connectors = 0, i;
8852 bool is_lvds = false, is_sdvo = false;
8854 for_each_connector_in_state(state, connector, connector_state, i) {
8855 if (connector_state->crtc != crtc_state->base.crtc)
8858 encoder = to_intel_encoder(connector_state->best_encoder);
8860 switch (encoder->type) {
8861 case INTEL_OUTPUT_LVDS:
8864 case INTEL_OUTPUT_SDVO:
8865 case INTEL_OUTPUT_HDMI:
8875 /* Enable autotuning of the PLL clock (if permissible) */
8878 if ((intel_panel_use_ssc(dev_priv) &&
8879 dev_priv->vbt.lvds_ssc_freq == 100000) ||
8880 (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
8882 } else if (crtc_state->sdvo_tv_clock)
8885 if (ironlake_needs_fb_cb_tune(&crtc_state->dpll, factor))
8888 if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
8894 dpll |= DPLLB_MODE_LVDS;
8896 dpll |= DPLLB_MODE_DAC_SERIAL;
8898 dpll |= (crtc_state->pixel_multiplier - 1)
8899 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
8902 dpll |= DPLL_SDVO_HIGH_SPEED;
8903 if (crtc_state->has_dp_encoder)
8904 dpll |= DPLL_SDVO_HIGH_SPEED;
8906 /* compute bitmask from p1 value */
8907 dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
8909 dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
8911 switch (crtc_state->dpll.p2) {
8913 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
8916 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
8919 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
8922 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
8926 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
8927 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
8929 dpll |= PLL_REF_INPUT_DREFCLK;
8931 return dpll | DPLL_VCO_ENABLE;
8934 static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
8935 struct intel_crtc_state *crtc_state)
8937 struct drm_device *dev = crtc->base.dev;
8938 intel_clock_t clock, reduced_clock;
8939 u32 dpll = 0, fp = 0, fp2 = 0;
8940 bool ok, has_reduced_clock = false;
8941 bool is_lvds = false;
8942 struct intel_shared_dpll *pll;
8944 memset(&crtc_state->dpll_hw_state, 0,
8945 sizeof(crtc_state->dpll_hw_state));
8947 is_lvds = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS);
8949 WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
8950 "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
8952 ok = ironlake_compute_clocks(&crtc->base, crtc_state, &clock,
8953 &has_reduced_clock, &reduced_clock);
8954 if (!ok && !crtc_state->clock_set) {
8955 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8958 /* Compat-code for transition, will disappear. */
8959 if (!crtc_state->clock_set) {
8960 crtc_state->dpll.n = clock.n;
8961 crtc_state->dpll.m1 = clock.m1;
8962 crtc_state->dpll.m2 = clock.m2;
8963 crtc_state->dpll.p1 = clock.p1;
8964 crtc_state->dpll.p2 = clock.p2;
8967 /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
8968 if (crtc_state->has_pch_encoder) {
8969 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
8970 if (has_reduced_clock)
8971 fp2 = i9xx_dpll_compute_fp(&reduced_clock);
8973 dpll = ironlake_compute_dpll(crtc, crtc_state,
8974 &fp, &reduced_clock,
8975 has_reduced_clock ? &fp2 : NULL);
8977 crtc_state->dpll_hw_state.dpll = dpll;
8978 crtc_state->dpll_hw_state.fp0 = fp;
8979 if (has_reduced_clock)
8980 crtc_state->dpll_hw_state.fp1 = fp2;
8982 crtc_state->dpll_hw_state.fp1 = fp;
8984 pll = intel_get_shared_dpll(crtc, crtc_state, NULL);
8986 DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
8987 pipe_name(crtc->pipe));
8992 if (is_lvds && has_reduced_clock)
8993 crtc->lowfreq_avail = true;
8995 crtc->lowfreq_avail = false;
9000 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
9001 struct intel_link_m_n *m_n)
9003 struct drm_device *dev = crtc->base.dev;
9004 struct drm_i915_private *dev_priv = dev->dev_private;
9005 enum pipe pipe = crtc->pipe;
9007 m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
9008 m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
9009 m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
9011 m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
9012 m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
9013 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9016 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
9017 enum transcoder transcoder,
9018 struct intel_link_m_n *m_n,
9019 struct intel_link_m_n *m2_n2)
9021 struct drm_device *dev = crtc->base.dev;
9022 struct drm_i915_private *dev_priv = dev->dev_private;
9023 enum pipe pipe = crtc->pipe;
9025 if (INTEL_INFO(dev)->gen >= 5) {
9026 m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
9027 m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
9028 m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
9030 m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
9031 m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
9032 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9033 /* Read M2_N2 registers only for gen < 8 (M2_N2 available for
9034 * gen < 8) and if DRRS is supported (to make sure the
9035 * registers are not unnecessarily read).
9037 if (m2_n2 && INTEL_INFO(dev)->gen < 8 &&
9038 crtc->config->has_drrs) {
9039 m2_n2->link_m = I915_READ(PIPE_LINK_M2(transcoder));
9040 m2_n2->link_n = I915_READ(PIPE_LINK_N2(transcoder));
9041 m2_n2->gmch_m = I915_READ(PIPE_DATA_M2(transcoder))
9043 m2_n2->gmch_n = I915_READ(PIPE_DATA_N2(transcoder));
9044 m2_n2->tu = ((I915_READ(PIPE_DATA_M2(transcoder))
9045 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9048 m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
9049 m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
9050 m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
9052 m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
9053 m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
9054 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9058 void intel_dp_get_m_n(struct intel_crtc *crtc,
9059 struct intel_crtc_state *pipe_config)
9061 if (pipe_config->has_pch_encoder)
9062 intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
9064 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
9065 &pipe_config->dp_m_n,
9066 &pipe_config->dp_m2_n2);
9069 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
9070 struct intel_crtc_state *pipe_config)
9072 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
9073 &pipe_config->fdi_m_n, NULL);
9076 static void skylake_get_pfit_config(struct intel_crtc *crtc,
9077 struct intel_crtc_state *pipe_config)
9079 struct drm_device *dev = crtc->base.dev;
9080 struct drm_i915_private *dev_priv = dev->dev_private;
9081 struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
9082 uint32_t ps_ctrl = 0;
9086 /* find scaler attached to this pipe */
9087 for (i = 0; i < crtc->num_scalers; i++) {
9088 ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
9089 if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
9091 pipe_config->pch_pfit.enabled = true;
9092 pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
9093 pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
9098 scaler_state->scaler_id = id;
9100 scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
9102 scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
9107 skylake_get_initial_plane_config(struct intel_crtc *crtc,
9108 struct intel_initial_plane_config *plane_config)
9110 struct drm_device *dev = crtc->base.dev;
9111 struct drm_i915_private *dev_priv = dev->dev_private;
9112 u32 val, base, offset, stride_mult, tiling;
9113 int pipe = crtc->pipe;
9114 int fourcc, pixel_format;
9115 unsigned int aligned_height;
9116 struct drm_framebuffer *fb;
9117 struct intel_framebuffer *intel_fb;
9119 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
9121 DRM_DEBUG_KMS("failed to alloc fb\n");
9125 fb = &intel_fb->base;
9127 val = I915_READ(PLANE_CTL(pipe, 0));
9128 if (!(val & PLANE_CTL_ENABLE))
9131 pixel_format = val & PLANE_CTL_FORMAT_MASK;
9132 fourcc = skl_format_to_fourcc(pixel_format,
9133 val & PLANE_CTL_ORDER_RGBX,
9134 val & PLANE_CTL_ALPHA_MASK);
9135 fb->pixel_format = fourcc;
9136 fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
9138 tiling = val & PLANE_CTL_TILED_MASK;
9140 case PLANE_CTL_TILED_LINEAR:
9141 fb->modifier[0] = DRM_FORMAT_MOD_NONE;
9143 case PLANE_CTL_TILED_X:
9144 plane_config->tiling = I915_TILING_X;
9145 fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
9147 case PLANE_CTL_TILED_Y:
9148 fb->modifier[0] = I915_FORMAT_MOD_Y_TILED;
9150 case PLANE_CTL_TILED_YF:
9151 fb->modifier[0] = I915_FORMAT_MOD_Yf_TILED;
9154 MISSING_CASE(tiling);
9158 base = I915_READ(PLANE_SURF(pipe, 0)) & 0xfffff000;
9159 plane_config->base = base;
9161 offset = I915_READ(PLANE_OFFSET(pipe, 0));
9163 val = I915_READ(PLANE_SIZE(pipe, 0));
9164 fb->height = ((val >> 16) & 0xfff) + 1;
9165 fb->width = ((val >> 0) & 0x1fff) + 1;
9167 val = I915_READ(PLANE_STRIDE(pipe, 0));
9168 stride_mult = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
9170 fb->pitches[0] = (val & 0x3ff) * stride_mult;
9172 aligned_height = intel_fb_align_height(dev, fb->height,
9176 plane_config->size = fb->pitches[0] * aligned_height;
9178 DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
9179 pipe_name(pipe), fb->width, fb->height,
9180 fb->bits_per_pixel, base, fb->pitches[0],
9181 plane_config->size);
9183 plane_config->fb = intel_fb;
9190 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
9191 struct intel_crtc_state *pipe_config)
9193 struct drm_device *dev = crtc->base.dev;
9194 struct drm_i915_private *dev_priv = dev->dev_private;
9197 tmp = I915_READ(PF_CTL(crtc->pipe));
9199 if (tmp & PF_ENABLE) {
9200 pipe_config->pch_pfit.enabled = true;
9201 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
9202 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
9204 /* We currently do not free assignements of panel fitters on
9205 * ivb/hsw (since we don't use the higher upscaling modes which
9206 * differentiates them) so just WARN about this case for now. */
9208 WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
9209 PF_PIPE_SEL_IVB(crtc->pipe));
9215 ironlake_get_initial_plane_config(struct intel_crtc *crtc,
9216 struct intel_initial_plane_config *plane_config)
9218 struct drm_device *dev = crtc->base.dev;
9219 struct drm_i915_private *dev_priv = dev->dev_private;
9220 u32 val, base, offset;
9221 int pipe = crtc->pipe;
9222 int fourcc, pixel_format;
9223 unsigned int aligned_height;
9224 struct drm_framebuffer *fb;
9225 struct intel_framebuffer *intel_fb;
9227 val = I915_READ(DSPCNTR(pipe));
9228 if (!(val & DISPLAY_PLANE_ENABLE))
9231 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
9233 DRM_DEBUG_KMS("failed to alloc fb\n");
9237 fb = &intel_fb->base;
9239 if (INTEL_INFO(dev)->gen >= 4) {
9240 if (val & DISPPLANE_TILED) {
9241 plane_config->tiling = I915_TILING_X;
9242 fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
9246 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
9247 fourcc = i9xx_format_to_fourcc(pixel_format);
9248 fb->pixel_format = fourcc;
9249 fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
9251 base = I915_READ(DSPSURF(pipe)) & 0xfffff000;
9252 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
9253 offset = I915_READ(DSPOFFSET(pipe));
9255 if (plane_config->tiling)
9256 offset = I915_READ(DSPTILEOFF(pipe));
9258 offset = I915_READ(DSPLINOFF(pipe));
9260 plane_config->base = base;
9262 val = I915_READ(PIPESRC(pipe));
9263 fb->width = ((val >> 16) & 0xfff) + 1;
9264 fb->height = ((val >> 0) & 0xfff) + 1;
9266 val = I915_READ(DSPSTRIDE(pipe));
9267 fb->pitches[0] = val & 0xffffffc0;
9269 aligned_height = intel_fb_align_height(dev, fb->height,
9273 plane_config->size = fb->pitches[0] * aligned_height;
9275 DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
9276 pipe_name(pipe), fb->width, fb->height,
9277 fb->bits_per_pixel, base, fb->pitches[0],
9278 plane_config->size);
9280 plane_config->fb = intel_fb;
9283 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
9284 struct intel_crtc_state *pipe_config)
9286 struct drm_device *dev = crtc->base.dev;
9287 struct drm_i915_private *dev_priv = dev->dev_private;
9288 enum intel_display_power_domain power_domain;
9292 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
9293 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9296 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
9297 pipe_config->shared_dpll = NULL;
9300 tmp = I915_READ(PIPECONF(crtc->pipe));
9301 if (!(tmp & PIPECONF_ENABLE))
9304 switch (tmp & PIPECONF_BPC_MASK) {
9306 pipe_config->pipe_bpp = 18;
9309 pipe_config->pipe_bpp = 24;
9311 case PIPECONF_10BPC:
9312 pipe_config->pipe_bpp = 30;
9314 case PIPECONF_12BPC:
9315 pipe_config->pipe_bpp = 36;
9321 if (tmp & PIPECONF_COLOR_RANGE_SELECT)
9322 pipe_config->limited_color_range = true;
9324 if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
9325 struct intel_shared_dpll *pll;
9326 enum intel_dpll_id pll_id;
9328 pipe_config->has_pch_encoder = true;
9330 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
9331 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
9332 FDI_DP_PORT_WIDTH_SHIFT) + 1;
9334 ironlake_get_fdi_m_n_config(crtc, pipe_config);
9336 if (HAS_PCH_IBX(dev_priv->dev)) {
9337 pll_id = (enum intel_dpll_id) crtc->pipe;
9339 tmp = I915_READ(PCH_DPLL_SEL);
9340 if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
9341 pll_id = DPLL_ID_PCH_PLL_B;
9343 pll_id= DPLL_ID_PCH_PLL_A;
9346 pipe_config->shared_dpll =
9347 intel_get_shared_dpll_by_id(dev_priv, pll_id);
9348 pll = pipe_config->shared_dpll;
9350 WARN_ON(!pll->funcs.get_hw_state(dev_priv, pll,
9351 &pipe_config->dpll_hw_state));
9353 tmp = pipe_config->dpll_hw_state.dpll;
9354 pipe_config->pixel_multiplier =
9355 ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
9356 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
9358 ironlake_pch_clock_get(crtc, pipe_config);
9360 pipe_config->pixel_multiplier = 1;
9363 intel_get_pipe_timings(crtc, pipe_config);
9365 ironlake_get_pfit_config(crtc, pipe_config);
9370 intel_display_power_put(dev_priv, power_domain);
9375 static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
9377 struct drm_device *dev = dev_priv->dev;
9378 struct intel_crtc *crtc;
9380 for_each_intel_crtc(dev, crtc)
9381 I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
9382 pipe_name(crtc->pipe));
9384 I915_STATE_WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
9385 I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
9386 I915_STATE_WARN(I915_READ(WRPLL_CTL(0)) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
9387 I915_STATE_WARN(I915_READ(WRPLL_CTL(1)) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
9388 I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
9389 I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
9390 "CPU PWM1 enabled\n");
9391 if (IS_HASWELL(dev))
9392 I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
9393 "CPU PWM2 enabled\n");
9394 I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
9395 "PCH PWM1 enabled\n");
9396 I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
9397 "Utility pin enabled\n");
9398 I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
9401 * In theory we can still leave IRQs enabled, as long as only the HPD
9402 * interrupts remain enabled. We used to check for that, but since it's
9403 * gen-specific and since we only disable LCPLL after we fully disable
9404 * the interrupts, the check below should be enough.
9406 I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
9409 static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
9411 struct drm_device *dev = dev_priv->dev;
9413 if (IS_HASWELL(dev))
9414 return I915_READ(D_COMP_HSW);
9416 return I915_READ(D_COMP_BDW);
9419 static void hsw_write_dcomp(struct drm_i915_private *dev_priv, uint32_t val)
9421 struct drm_device *dev = dev_priv->dev;
9423 if (IS_HASWELL(dev)) {
9424 mutex_lock(&dev_priv->rps.hw_lock);
9425 if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP,
9427 DRM_ERROR("Failed to write to D_COMP\n");
9428 mutex_unlock(&dev_priv->rps.hw_lock);
9430 I915_WRITE(D_COMP_BDW, val);
9431 POSTING_READ(D_COMP_BDW);
9436 * This function implements pieces of two sequences from BSpec:
9437 * - Sequence for display software to disable LCPLL
9438 * - Sequence for display software to allow package C8+
9439 * The steps implemented here are just the steps that actually touch the LCPLL
9440 * register. Callers should take care of disabling all the display engine
9441 * functions, doing the mode unset, fixing interrupts, etc.
9443 static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
9444 bool switch_to_fclk, bool allow_power_down)
9448 assert_can_disable_lcpll(dev_priv);
9450 val = I915_READ(LCPLL_CTL);
9452 if (switch_to_fclk) {
9453 val |= LCPLL_CD_SOURCE_FCLK;
9454 I915_WRITE(LCPLL_CTL, val);
9456 if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
9457 LCPLL_CD_SOURCE_FCLK_DONE, 1))
9458 DRM_ERROR("Switching to FCLK failed\n");
9460 val = I915_READ(LCPLL_CTL);
9463 val |= LCPLL_PLL_DISABLE;
9464 I915_WRITE(LCPLL_CTL, val);
9465 POSTING_READ(LCPLL_CTL);
9467 if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1))
9468 DRM_ERROR("LCPLL still locked\n");
9470 val = hsw_read_dcomp(dev_priv);
9471 val |= D_COMP_COMP_DISABLE;
9472 hsw_write_dcomp(dev_priv, val);
9475 if (wait_for((hsw_read_dcomp(dev_priv) & D_COMP_RCOMP_IN_PROGRESS) == 0,
9477 DRM_ERROR("D_COMP RCOMP still in progress\n");
9479 if (allow_power_down) {
9480 val = I915_READ(LCPLL_CTL);
9481 val |= LCPLL_POWER_DOWN_ALLOW;
9482 I915_WRITE(LCPLL_CTL, val);
9483 POSTING_READ(LCPLL_CTL);
9488 * Fully restores LCPLL, disallowing power down and switching back to LCPLL
9491 static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
9495 val = I915_READ(LCPLL_CTL);
9497 if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
9498 LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
9502 * Make sure we're not on PC8 state before disabling PC8, otherwise
9503 * we'll hang the machine. To prevent PC8 state, just enable force_wake.
9505 intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
9507 if (val & LCPLL_POWER_DOWN_ALLOW) {
9508 val &= ~LCPLL_POWER_DOWN_ALLOW;
9509 I915_WRITE(LCPLL_CTL, val);
9510 POSTING_READ(LCPLL_CTL);
9513 val = hsw_read_dcomp(dev_priv);
9514 val |= D_COMP_COMP_FORCE;
9515 val &= ~D_COMP_COMP_DISABLE;
9516 hsw_write_dcomp(dev_priv, val);
9518 val = I915_READ(LCPLL_CTL);
9519 val &= ~LCPLL_PLL_DISABLE;
9520 I915_WRITE(LCPLL_CTL, val);
9522 if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5))
9523 DRM_ERROR("LCPLL not locked yet\n");
9525 if (val & LCPLL_CD_SOURCE_FCLK) {
9526 val = I915_READ(LCPLL_CTL);
9527 val &= ~LCPLL_CD_SOURCE_FCLK;
9528 I915_WRITE(LCPLL_CTL, val);
9530 if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
9531 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
9532 DRM_ERROR("Switching back to LCPLL failed\n");
9535 intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
9536 intel_update_cdclk(dev_priv->dev);
9540 * Package states C8 and deeper are really deep PC states that can only be
9541 * reached when all the devices on the system allow it, so even if the graphics
9542 * device allows PC8+, it doesn't mean the system will actually get to these
9543 * states. Our driver only allows PC8+ when going into runtime PM.
9545 * The requirements for PC8+ are that all the outputs are disabled, the power
9546 * well is disabled and most interrupts are disabled, and these are also
9547 * requirements for runtime PM. When these conditions are met, we manually do
9548 * the other conditions: disable the interrupts, clocks and switch LCPLL refclk
9549 * to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard
9552 * When we really reach PC8 or deeper states (not just when we allow it) we lose
9553 * the state of some registers, so when we come back from PC8+ we need to
9554 * restore this state. We don't get into PC8+ if we're not in RC6, so we don't
9555 * need to take care of the registers kept by RC6. Notice that this happens even
9556 * if we don't put the device in PCI D3 state (which is what currently happens
9557 * because of the runtime PM support).
9559 * For more, read "Display Sequences for Package C8" on the hardware
9562 void hsw_enable_pc8(struct drm_i915_private *dev_priv)
9564 struct drm_device *dev = dev_priv->dev;
9567 DRM_DEBUG_KMS("Enabling package C8+\n");
9569 if (HAS_PCH_LPT_LP(dev)) {
9570 val = I915_READ(SOUTH_DSPCLK_GATE_D);
9571 val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
9572 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
9575 lpt_disable_clkout_dp(dev);
9576 hsw_disable_lcpll(dev_priv, true, true);
9579 void hsw_disable_pc8(struct drm_i915_private *dev_priv)
9581 struct drm_device *dev = dev_priv->dev;
9584 DRM_DEBUG_KMS("Disabling package C8+\n");
9586 hsw_restore_lcpll(dev_priv);
9587 lpt_init_pch_refclk(dev);
9589 if (HAS_PCH_LPT_LP(dev)) {
9590 val = I915_READ(SOUTH_DSPCLK_GATE_D);
9591 val |= PCH_LP_PARTITION_LEVEL_DISABLE;
9592 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
9596 static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state)
9598 struct drm_device *dev = old_state->dev;
9599 struct intel_atomic_state *old_intel_state =
9600 to_intel_atomic_state(old_state);
9601 unsigned int req_cdclk = old_intel_state->dev_cdclk;
9603 broxton_set_cdclk(dev, req_cdclk);
9606 /* compute the max rate for new configuration */
9607 static int ilk_max_pixel_rate(struct drm_atomic_state *state)
9609 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
9610 struct drm_i915_private *dev_priv = state->dev->dev_private;
9611 struct drm_crtc *crtc;
9612 struct drm_crtc_state *cstate;
9613 struct intel_crtc_state *crtc_state;
9614 unsigned max_pixel_rate = 0, i;
9617 memcpy(intel_state->min_pixclk, dev_priv->min_pixclk,
9618 sizeof(intel_state->min_pixclk));
9620 for_each_crtc_in_state(state, crtc, cstate, i) {
9623 crtc_state = to_intel_crtc_state(cstate);
9624 if (!crtc_state->base.enable) {
9625 intel_state->min_pixclk[i] = 0;
9629 pixel_rate = ilk_pipe_pixel_rate(crtc_state);
9631 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
9632 if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled)
9633 pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
9635 intel_state->min_pixclk[i] = pixel_rate;
9638 for_each_pipe(dev_priv, pipe)
9639 max_pixel_rate = max(intel_state->min_pixclk[pipe], max_pixel_rate);
9641 return max_pixel_rate;
9644 static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
9646 struct drm_i915_private *dev_priv = dev->dev_private;
9650 if (WARN((I915_READ(LCPLL_CTL) &
9651 (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
9652 LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
9653 LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
9654 LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
9655 "trying to change cdclk frequency with cdclk not enabled\n"))
9658 mutex_lock(&dev_priv->rps.hw_lock);
9659 ret = sandybridge_pcode_write(dev_priv,
9660 BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
9661 mutex_unlock(&dev_priv->rps.hw_lock);
9663 DRM_ERROR("failed to inform pcode about cdclk change\n");
9667 val = I915_READ(LCPLL_CTL);
9668 val |= LCPLL_CD_SOURCE_FCLK;
9669 I915_WRITE(LCPLL_CTL, val);
9671 if (wait_for_us(I915_READ(LCPLL_CTL) &
9672 LCPLL_CD_SOURCE_FCLK_DONE, 1))
9673 DRM_ERROR("Switching to FCLK failed\n");
9675 val = I915_READ(LCPLL_CTL);
9676 val &= ~LCPLL_CLK_FREQ_MASK;
9680 val |= LCPLL_CLK_FREQ_450;
9684 val |= LCPLL_CLK_FREQ_54O_BDW;
9688 val |= LCPLL_CLK_FREQ_337_5_BDW;
9692 val |= LCPLL_CLK_FREQ_675_BDW;
9696 WARN(1, "invalid cdclk frequency\n");
9700 I915_WRITE(LCPLL_CTL, val);
9702 val = I915_READ(LCPLL_CTL);
9703 val &= ~LCPLL_CD_SOURCE_FCLK;
9704 I915_WRITE(LCPLL_CTL, val);
9706 if (wait_for_us((I915_READ(LCPLL_CTL) &
9707 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
9708 DRM_ERROR("Switching back to LCPLL failed\n");
9710 mutex_lock(&dev_priv->rps.hw_lock);
9711 sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
9712 mutex_unlock(&dev_priv->rps.hw_lock);
9714 intel_update_cdclk(dev);
9716 WARN(cdclk != dev_priv->cdclk_freq,
9717 "cdclk requested %d kHz but got %d kHz\n",
9718 cdclk, dev_priv->cdclk_freq);
9721 static int broadwell_modeset_calc_cdclk(struct drm_atomic_state *state)
9723 struct drm_i915_private *dev_priv = to_i915(state->dev);
9724 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
9725 int max_pixclk = ilk_max_pixel_rate(state);
9729 * FIXME should also account for plane ratio
9730 * once 64bpp pixel formats are supported.
9732 if (max_pixclk > 540000)
9734 else if (max_pixclk > 450000)
9736 else if (max_pixclk > 337500)
9741 if (cdclk > dev_priv->max_cdclk_freq) {
9742 DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
9743 cdclk, dev_priv->max_cdclk_freq);
9747 intel_state->cdclk = intel_state->dev_cdclk = cdclk;
9748 if (!intel_state->active_crtcs)
9749 intel_state->dev_cdclk = 337500;
9754 static void broadwell_modeset_commit_cdclk(struct drm_atomic_state *old_state)
9756 struct drm_device *dev = old_state->dev;
9757 struct intel_atomic_state *old_intel_state =
9758 to_intel_atomic_state(old_state);
9759 unsigned req_cdclk = old_intel_state->dev_cdclk;
9761 broadwell_set_cdclk(dev, req_cdclk);
9764 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
9765 struct intel_crtc_state *crtc_state)
9767 struct intel_encoder *intel_encoder =
9768 intel_ddi_get_crtc_new_encoder(crtc_state);
9770 if (intel_encoder->type != INTEL_OUTPUT_DSI) {
9771 if (!intel_ddi_pll_select(crtc, crtc_state))
9775 crtc->lowfreq_avail = false;
9780 static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,
9782 struct intel_crtc_state *pipe_config)
9784 enum intel_dpll_id id;
9788 pipe_config->ddi_pll_sel = SKL_DPLL0;
9789 id = DPLL_ID_SKL_DPLL0;
9792 pipe_config->ddi_pll_sel = SKL_DPLL1;
9793 id = DPLL_ID_SKL_DPLL1;
9796 pipe_config->ddi_pll_sel = SKL_DPLL2;
9797 id = DPLL_ID_SKL_DPLL2;
9800 DRM_ERROR("Incorrect port type\n");
9804 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
9807 static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
9809 struct intel_crtc_state *pipe_config)
9811 enum intel_dpll_id id;
9814 temp = I915_READ(DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
9815 pipe_config->ddi_pll_sel = temp >> (port * 3 + 1);
9817 switch (pipe_config->ddi_pll_sel) {
9819 id = DPLL_ID_SKL_DPLL0;
9822 id = DPLL_ID_SKL_DPLL1;
9825 id = DPLL_ID_SKL_DPLL2;
9828 id = DPLL_ID_SKL_DPLL3;
9831 MISSING_CASE(pipe_config->ddi_pll_sel);
9835 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
9838 static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,
9840 struct intel_crtc_state *pipe_config)
9842 enum intel_dpll_id id;
9844 pipe_config->ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
9846 switch (pipe_config->ddi_pll_sel) {
9847 case PORT_CLK_SEL_WRPLL1:
9848 id = DPLL_ID_WRPLL1;
9850 case PORT_CLK_SEL_WRPLL2:
9851 id = DPLL_ID_WRPLL2;
9853 case PORT_CLK_SEL_SPLL:
9856 case PORT_CLK_SEL_LCPLL_810:
9857 id = DPLL_ID_LCPLL_810;
9859 case PORT_CLK_SEL_LCPLL_1350:
9860 id = DPLL_ID_LCPLL_1350;
9862 case PORT_CLK_SEL_LCPLL_2700:
9863 id = DPLL_ID_LCPLL_2700;
9866 MISSING_CASE(pipe_config->ddi_pll_sel);
9868 case PORT_CLK_SEL_NONE:
9872 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
9875 static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
9876 struct intel_crtc_state *pipe_config)
9878 struct drm_device *dev = crtc->base.dev;
9879 struct drm_i915_private *dev_priv = dev->dev_private;
9880 struct intel_shared_dpll *pll;
9884 tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
9886 port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
9888 if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
9889 skylake_get_ddi_pll(dev_priv, port, pipe_config);
9890 else if (IS_BROXTON(dev))
9891 bxt_get_ddi_pll(dev_priv, port, pipe_config);
9893 haswell_get_ddi_pll(dev_priv, port, pipe_config);
9895 pll = pipe_config->shared_dpll;
9897 WARN_ON(!pll->funcs.get_hw_state(dev_priv, pll,
9898 &pipe_config->dpll_hw_state));
9902 * Haswell has only FDI/PCH transcoder A. It is which is connected to
9903 * DDI E. So just check whether this pipe is wired to DDI E and whether
9904 * the PCH transcoder is on.
9906 if (INTEL_INFO(dev)->gen < 9 &&
9907 (port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
9908 pipe_config->has_pch_encoder = true;
9910 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
9911 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
9912 FDI_DP_PORT_WIDTH_SHIFT) + 1;
9914 ironlake_get_fdi_m_n_config(crtc, pipe_config);
9918 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
9919 struct intel_crtc_state *pipe_config)
9921 struct drm_device *dev = crtc->base.dev;
9922 struct drm_i915_private *dev_priv = dev->dev_private;
9923 enum intel_display_power_domain power_domain;
9924 unsigned long power_domain_mask;
9928 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
9929 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9931 power_domain_mask = BIT(power_domain);
9935 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
9936 pipe_config->shared_dpll = NULL;
9938 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
9939 if (tmp & TRANS_DDI_FUNC_ENABLE) {
9940 enum pipe trans_edp_pipe;
9941 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
9943 WARN(1, "unknown pipe linked to edp transcoder\n");
9944 case TRANS_DDI_EDP_INPUT_A_ONOFF:
9945 case TRANS_DDI_EDP_INPUT_A_ON:
9946 trans_edp_pipe = PIPE_A;
9948 case TRANS_DDI_EDP_INPUT_B_ONOFF:
9949 trans_edp_pipe = PIPE_B;
9951 case TRANS_DDI_EDP_INPUT_C_ONOFF:
9952 trans_edp_pipe = PIPE_C;
9956 if (trans_edp_pipe == crtc->pipe)
9957 pipe_config->cpu_transcoder = TRANSCODER_EDP;
9960 power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
9961 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9963 power_domain_mask |= BIT(power_domain);
9965 tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
9966 if (!(tmp & PIPECONF_ENABLE))
9969 haswell_get_ddi_port_state(crtc, pipe_config);
9971 intel_get_pipe_timings(crtc, pipe_config);
9973 if (INTEL_INFO(dev)->gen >= 9) {
9974 skl_init_scalers(dev, crtc, pipe_config);
9977 if (INTEL_INFO(dev)->gen >= 9) {
9978 pipe_config->scaler_state.scaler_id = -1;
9979 pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
9982 power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
9983 if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
9984 power_domain_mask |= BIT(power_domain);
9985 if (INTEL_INFO(dev)->gen >= 9)
9986 skylake_get_pfit_config(crtc, pipe_config);
9988 ironlake_get_pfit_config(crtc, pipe_config);
9991 if (IS_HASWELL(dev))
9992 pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
9993 (I915_READ(IPS_CTL) & IPS_ENABLE);
9995 if (pipe_config->cpu_transcoder != TRANSCODER_EDP) {
9996 pipe_config->pixel_multiplier =
9997 I915_READ(PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
9999 pipe_config->pixel_multiplier = 1;
10005 for_each_power_domain(power_domain, power_domain_mask)
10006 intel_display_power_put(dev_priv, power_domain);
10011 static void i845_update_cursor(struct drm_crtc *crtc, u32 base,
10012 const struct intel_plane_state *plane_state)
10014 struct drm_device *dev = crtc->dev;
10015 struct drm_i915_private *dev_priv = dev->dev_private;
10016 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10017 uint32_t cntl = 0, size = 0;
10019 if (plane_state && plane_state->visible) {
10020 unsigned int width = plane_state->base.crtc_w;
10021 unsigned int height = plane_state->base.crtc_h;
10022 unsigned int stride = roundup_pow_of_two(width) * 4;
10026 WARN_ONCE(1, "Invalid cursor width/stride, width=%u, stride=%u\n",
10037 cntl |= CURSOR_ENABLE |
10038 CURSOR_GAMMA_ENABLE |
10039 CURSOR_FORMAT_ARGB |
10040 CURSOR_STRIDE(stride);
10042 size = (height << 12) | width;
10045 if (intel_crtc->cursor_cntl != 0 &&
10046 (intel_crtc->cursor_base != base ||
10047 intel_crtc->cursor_size != size ||
10048 intel_crtc->cursor_cntl != cntl)) {
10049 /* On these chipsets we can only modify the base/size/stride
10050 * whilst the cursor is disabled.
10052 I915_WRITE(CURCNTR(PIPE_A), 0);
10053 POSTING_READ(CURCNTR(PIPE_A));
10054 intel_crtc->cursor_cntl = 0;
10057 if (intel_crtc->cursor_base != base) {
10058 I915_WRITE(CURBASE(PIPE_A), base);
10059 intel_crtc->cursor_base = base;
10062 if (intel_crtc->cursor_size != size) {
10063 I915_WRITE(CURSIZE, size);
10064 intel_crtc->cursor_size = size;
10067 if (intel_crtc->cursor_cntl != cntl) {
10068 I915_WRITE(CURCNTR(PIPE_A), cntl);
10069 POSTING_READ(CURCNTR(PIPE_A));
10070 intel_crtc->cursor_cntl = cntl;
10074 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base,
10075 const struct intel_plane_state *plane_state)
10077 struct drm_device *dev = crtc->dev;
10078 struct drm_i915_private *dev_priv = dev->dev_private;
10079 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10080 int pipe = intel_crtc->pipe;
10083 if (plane_state && plane_state->visible) {
10084 cntl = MCURSOR_GAMMA_ENABLE;
10085 switch (plane_state->base.crtc_w) {
10087 cntl |= CURSOR_MODE_64_ARGB_AX;
10090 cntl |= CURSOR_MODE_128_ARGB_AX;
10093 cntl |= CURSOR_MODE_256_ARGB_AX;
10096 MISSING_CASE(plane_state->base.crtc_w);
10099 cntl |= pipe << 28; /* Connect to correct pipe */
10102 cntl |= CURSOR_PIPE_CSC_ENABLE;
10104 if (plane_state->base.rotation == BIT(DRM_ROTATE_180))
10105 cntl |= CURSOR_ROTATE_180;
10108 if (intel_crtc->cursor_cntl != cntl) {
10109 I915_WRITE(CURCNTR(pipe), cntl);
10110 POSTING_READ(CURCNTR(pipe));
10111 intel_crtc->cursor_cntl = cntl;
10114 /* and commit changes on next vblank */
10115 I915_WRITE(CURBASE(pipe), base);
10116 POSTING_READ(CURBASE(pipe));
10118 intel_crtc->cursor_base = base;
10121 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
10122 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
10123 const struct intel_plane_state *plane_state)
10125 struct drm_device *dev = crtc->dev;
10126 struct drm_i915_private *dev_priv = dev->dev_private;
10127 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10128 int pipe = intel_crtc->pipe;
10129 u32 base = intel_crtc->cursor_addr;
10133 int x = plane_state->base.crtc_x;
10134 int y = plane_state->base.crtc_y;
10137 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
10140 pos |= x << CURSOR_X_SHIFT;
10143 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
10146 pos |= y << CURSOR_Y_SHIFT;
10148 /* ILK+ do this automagically */
10149 if (HAS_GMCH_DISPLAY(dev) &&
10150 plane_state->base.rotation == BIT(DRM_ROTATE_180)) {
10151 base += (plane_state->base.crtc_h *
10152 plane_state->base.crtc_w - 1) * 4;
10156 I915_WRITE(CURPOS(pipe), pos);
10158 if (IS_845G(dev) || IS_I865G(dev))
10159 i845_update_cursor(crtc, base, plane_state);
10161 i9xx_update_cursor(crtc, base, plane_state);
10164 static bool cursor_size_ok(struct drm_device *dev,
10165 uint32_t width, uint32_t height)
10167 if (width == 0 || height == 0)
10171 * 845g/865g are special in that they are only limited by
10172 * the width of their cursors, the height is arbitrary up to
10173 * the precision of the register. Everything else requires
10174 * square cursors, limited to a few power-of-two sizes.
10176 if (IS_845G(dev) || IS_I865G(dev)) {
10177 if ((width & 63) != 0)
10180 if (width > (IS_845G(dev) ? 64 : 512))
10186 switch (width | height) {
10201 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
10202 u16 *blue, uint32_t start, uint32_t size)
10204 int end = (start + size > 256) ? 256 : start + size, i;
10205 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10207 for (i = start; i < end; i++) {
10208 intel_crtc->lut_r[i] = red[i] >> 8;
10209 intel_crtc->lut_g[i] = green[i] >> 8;
10210 intel_crtc->lut_b[i] = blue[i] >> 8;
10213 intel_crtc_load_lut(crtc);
10216 /* VESA 640x480x72Hz mode to set on the pipe */
10217 static struct drm_display_mode load_detect_mode = {
10218 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
10219 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
10222 struct drm_framebuffer *
10223 __intel_framebuffer_create(struct drm_device *dev,
10224 struct drm_mode_fb_cmd2 *mode_cmd,
10225 struct drm_i915_gem_object *obj)
10227 struct intel_framebuffer *intel_fb;
10230 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
10232 return ERR_PTR(-ENOMEM);
10234 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
10238 return &intel_fb->base;
10242 return ERR_PTR(ret);
10245 static struct drm_framebuffer *
10246 intel_framebuffer_create(struct drm_device *dev,
10247 struct drm_mode_fb_cmd2 *mode_cmd,
10248 struct drm_i915_gem_object *obj)
10250 struct drm_framebuffer *fb;
10253 ret = i915_mutex_lock_interruptible(dev);
10255 return ERR_PTR(ret);
10256 fb = __intel_framebuffer_create(dev, mode_cmd, obj);
10257 mutex_unlock(&dev->struct_mutex);
10263 intel_framebuffer_pitch_for_width(int width, int bpp)
10265 u32 pitch = DIV_ROUND_UP(width * bpp, 8);
10266 return ALIGN(pitch, 64);
10270 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
10272 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
10273 return PAGE_ALIGN(pitch * mode->vdisplay);
10276 static struct drm_framebuffer *
10277 intel_framebuffer_create_for_mode(struct drm_device *dev,
10278 struct drm_display_mode *mode,
10279 int depth, int bpp)
10281 struct drm_framebuffer *fb;
10282 struct drm_i915_gem_object *obj;
10283 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
10285 obj = i915_gem_alloc_object(dev,
10286 intel_framebuffer_size_for_mode(mode, bpp));
10288 return ERR_PTR(-ENOMEM);
10290 mode_cmd.width = mode->hdisplay;
10291 mode_cmd.height = mode->vdisplay;
10292 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
10294 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
10296 fb = intel_framebuffer_create(dev, &mode_cmd, obj);
10298 drm_gem_object_unreference_unlocked(&obj->base);
10303 static struct drm_framebuffer *
10304 mode_fits_in_fbdev(struct drm_device *dev,
10305 struct drm_display_mode *mode)
10307 #ifdef CONFIG_DRM_FBDEV_EMULATION
10308 struct drm_i915_private *dev_priv = dev->dev_private;
10309 struct drm_i915_gem_object *obj;
10310 struct drm_framebuffer *fb;
10312 if (!dev_priv->fbdev)
10315 if (!dev_priv->fbdev->fb)
10318 obj = dev_priv->fbdev->fb->obj;
10321 fb = &dev_priv->fbdev->fb->base;
10322 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
10323 fb->bits_per_pixel))
10326 if (obj->base.size < mode->vdisplay * fb->pitches[0])
10329 drm_framebuffer_reference(fb);
10336 static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
10337 struct drm_crtc *crtc,
10338 struct drm_display_mode *mode,
10339 struct drm_framebuffer *fb,
10342 struct drm_plane_state *plane_state;
10343 int hdisplay, vdisplay;
10346 plane_state = drm_atomic_get_plane_state(state, crtc->primary);
10347 if (IS_ERR(plane_state))
10348 return PTR_ERR(plane_state);
10351 drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
10353 hdisplay = vdisplay = 0;
10355 ret = drm_atomic_set_crtc_for_plane(plane_state, fb ? crtc : NULL);
10358 drm_atomic_set_fb_for_plane(plane_state, fb);
10359 plane_state->crtc_x = 0;
10360 plane_state->crtc_y = 0;
10361 plane_state->crtc_w = hdisplay;
10362 plane_state->crtc_h = vdisplay;
10363 plane_state->src_x = x << 16;
10364 plane_state->src_y = y << 16;
10365 plane_state->src_w = hdisplay << 16;
10366 plane_state->src_h = vdisplay << 16;
10371 bool intel_get_load_detect_pipe(struct drm_connector *connector,
10372 struct drm_display_mode *mode,
10373 struct intel_load_detect_pipe *old,
10374 struct drm_modeset_acquire_ctx *ctx)
10376 struct intel_crtc *intel_crtc;
10377 struct intel_encoder *intel_encoder =
10378 intel_attached_encoder(connector);
10379 struct drm_crtc *possible_crtc;
10380 struct drm_encoder *encoder = &intel_encoder->base;
10381 struct drm_crtc *crtc = NULL;
10382 struct drm_device *dev = encoder->dev;
10383 struct drm_framebuffer *fb;
10384 struct drm_mode_config *config = &dev->mode_config;
10385 struct drm_atomic_state *state = NULL, *restore_state = NULL;
10386 struct drm_connector_state *connector_state;
10387 struct intel_crtc_state *crtc_state;
10390 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
10391 connector->base.id, connector->name,
10392 encoder->base.id, encoder->name);
10394 old->restore_state = NULL;
10397 ret = drm_modeset_lock(&config->connection_mutex, ctx);
10402 * Algorithm gets a little messy:
10404 * - if the connector already has an assigned crtc, use it (but make
10405 * sure it's on first)
10407 * - try to find the first unused crtc that can drive this connector,
10408 * and use that if we find one
10411 /* See if we already have a CRTC for this connector */
10412 if (connector->state->crtc) {
10413 crtc = connector->state->crtc;
10415 ret = drm_modeset_lock(&crtc->mutex, ctx);
10419 /* Make sure the crtc and connector are running */
10423 /* Find an unused one (if possible) */
10424 for_each_crtc(dev, possible_crtc) {
10426 if (!(encoder->possible_crtcs & (1 << i)))
10429 ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
10433 if (possible_crtc->state->enable) {
10434 drm_modeset_unlock(&possible_crtc->mutex);
10438 crtc = possible_crtc;
10443 * If we didn't find an unused CRTC, don't use any.
10446 DRM_DEBUG_KMS("no pipe available for load-detect\n");
10451 intel_crtc = to_intel_crtc(crtc);
10453 ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
10457 state = drm_atomic_state_alloc(dev);
10458 restore_state = drm_atomic_state_alloc(dev);
10459 if (!state || !restore_state) {
10464 state->acquire_ctx = ctx;
10465 restore_state->acquire_ctx = ctx;
10467 connector_state = drm_atomic_get_connector_state(state, connector);
10468 if (IS_ERR(connector_state)) {
10469 ret = PTR_ERR(connector_state);
10473 ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
10477 crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
10478 if (IS_ERR(crtc_state)) {
10479 ret = PTR_ERR(crtc_state);
10483 crtc_state->base.active = crtc_state->base.enable = true;
10486 mode = &load_detect_mode;
10488 /* We need a framebuffer large enough to accommodate all accesses
10489 * that the plane may generate whilst we perform load detection.
10490 * We can not rely on the fbcon either being present (we get called
10491 * during its initialisation to detect all boot displays, or it may
10492 * not even exist) or that it is large enough to satisfy the
10495 fb = mode_fits_in_fbdev(dev, mode);
10497 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
10498 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
10500 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
10502 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
10506 ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
10510 drm_framebuffer_unreference(fb);
10512 ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
10516 ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
10518 ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
10520 ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(restore_state, crtc->primary));
10522 DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
10526 ret = drm_atomic_commit(state);
10528 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
10532 old->restore_state = restore_state;
10534 /* let the connector get through one full cycle before testing */
10535 intel_wait_for_vblank(dev, intel_crtc->pipe);
10539 drm_atomic_state_free(state);
10540 drm_atomic_state_free(restore_state);
10541 restore_state = state = NULL;
10543 if (ret == -EDEADLK) {
10544 drm_modeset_backoff(ctx);
10551 void intel_release_load_detect_pipe(struct drm_connector *connector,
10552 struct intel_load_detect_pipe *old,
10553 struct drm_modeset_acquire_ctx *ctx)
10555 struct intel_encoder *intel_encoder =
10556 intel_attached_encoder(connector);
10557 struct drm_encoder *encoder = &intel_encoder->base;
10558 struct drm_atomic_state *state = old->restore_state;
10561 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
10562 connector->base.id, connector->name,
10563 encoder->base.id, encoder->name);
10568 ret = drm_atomic_commit(state);
10570 DRM_DEBUG_KMS("Couldn't release load detect pipe: %i\n", ret);
10571 drm_atomic_state_free(state);
10575 static int i9xx_pll_refclk(struct drm_device *dev,
10576 const struct intel_crtc_state *pipe_config)
10578 struct drm_i915_private *dev_priv = dev->dev_private;
10579 u32 dpll = pipe_config->dpll_hw_state.dpll;
10581 if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
10582 return dev_priv->vbt.lvds_ssc_freq;
10583 else if (HAS_PCH_SPLIT(dev))
10585 else if (!IS_GEN2(dev))
10591 /* Returns the clock of the currently programmed mode of the given pipe. */
10592 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
10593 struct intel_crtc_state *pipe_config)
10595 struct drm_device *dev = crtc->base.dev;
10596 struct drm_i915_private *dev_priv = dev->dev_private;
10597 int pipe = pipe_config->cpu_transcoder;
10598 u32 dpll = pipe_config->dpll_hw_state.dpll;
10600 intel_clock_t clock;
10602 int refclk = i9xx_pll_refclk(dev, pipe_config);
10604 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
10605 fp = pipe_config->dpll_hw_state.fp0;
10607 fp = pipe_config->dpll_hw_state.fp1;
10609 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
10610 if (IS_PINEVIEW(dev)) {
10611 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
10612 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
10614 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
10615 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
10618 if (!IS_GEN2(dev)) {
10619 if (IS_PINEVIEW(dev))
10620 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
10621 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
10623 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
10624 DPLL_FPA01_P1_POST_DIV_SHIFT);
10626 switch (dpll & DPLL_MODE_MASK) {
10627 case DPLLB_MODE_DAC_SERIAL:
10628 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
10631 case DPLLB_MODE_LVDS:
10632 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
10636 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
10637 "mode\n", (int)(dpll & DPLL_MODE_MASK));
10641 if (IS_PINEVIEW(dev))
10642 port_clock = pnv_calc_dpll_params(refclk, &clock);
10644 port_clock = i9xx_calc_dpll_params(refclk, &clock);
10646 u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
10647 bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
10650 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
10651 DPLL_FPA01_P1_POST_DIV_SHIFT);
10653 if (lvds & LVDS_CLKB_POWER_UP)
10658 if (dpll & PLL_P1_DIVIDE_BY_TWO)
10661 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
10662 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
10664 if (dpll & PLL_P2_DIVIDE_BY_4)
10670 port_clock = i9xx_calc_dpll_params(refclk, &clock);
10674 * This value includes pixel_multiplier. We will use
10675 * port_clock to compute adjusted_mode.crtc_clock in the
10676 * encoder's get_config() function.
10678 pipe_config->port_clock = port_clock;
10681 int intel_dotclock_calculate(int link_freq,
10682 const struct intel_link_m_n *m_n)
10685 * The calculation for the data clock is:
10686 * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
10687 * But we want to avoid losing precison if possible, so:
10688 * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
10690 * and the link clock is simpler:
10691 * link_clock = (m * link_clock) / n
10697 return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
10700 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
10701 struct intel_crtc_state *pipe_config)
10703 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
10705 /* read out port_clock from the DPLL */
10706 i9xx_crtc_clock_get(crtc, pipe_config);
10709 * In case there is an active pipe without active ports,
10710 * we may need some idea for the dotclock anyway.
10711 * Calculate one based on the FDI configuration.
10713 pipe_config->base.adjusted_mode.crtc_clock =
10714 intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
10715 &pipe_config->fdi_m_n);
10718 /** Returns the currently programmed mode of the given pipe. */
10719 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
10720 struct drm_crtc *crtc)
10722 struct drm_i915_private *dev_priv = dev->dev_private;
10723 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10724 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
10725 struct drm_display_mode *mode;
10726 struct intel_crtc_state *pipe_config;
10727 int htot = I915_READ(HTOTAL(cpu_transcoder));
10728 int hsync = I915_READ(HSYNC(cpu_transcoder));
10729 int vtot = I915_READ(VTOTAL(cpu_transcoder));
10730 int vsync = I915_READ(VSYNC(cpu_transcoder));
10731 enum pipe pipe = intel_crtc->pipe;
10733 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
10737 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
10738 if (!pipe_config) {
10744 * Construct a pipe_config sufficient for getting the clock info
10745 * back out of crtc_clock_get.
10747 * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
10748 * to use a real value here instead.
10750 pipe_config->cpu_transcoder = (enum transcoder) pipe;
10751 pipe_config->pixel_multiplier = 1;
10752 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(pipe));
10753 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(pipe));
10754 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(pipe));
10755 i9xx_crtc_clock_get(intel_crtc, pipe_config);
10757 mode->clock = pipe_config->port_clock / pipe_config->pixel_multiplier;
10758 mode->hdisplay = (htot & 0xffff) + 1;
10759 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
10760 mode->hsync_start = (hsync & 0xffff) + 1;
10761 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
10762 mode->vdisplay = (vtot & 0xffff) + 1;
10763 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
10764 mode->vsync_start = (vsync & 0xffff) + 1;
10765 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
10767 drm_mode_set_name(mode);
10769 kfree(pipe_config);
10774 void intel_mark_busy(struct drm_device *dev)
10776 struct drm_i915_private *dev_priv = dev->dev_private;
10778 if (dev_priv->mm.busy)
10781 intel_runtime_pm_get(dev_priv);
10782 i915_update_gfx_val(dev_priv);
10783 if (INTEL_INFO(dev)->gen >= 6)
10784 gen6_rps_busy(dev_priv);
10785 dev_priv->mm.busy = true;
10788 void intel_mark_idle(struct drm_device *dev)
10790 struct drm_i915_private *dev_priv = dev->dev_private;
10792 if (!dev_priv->mm.busy)
10795 dev_priv->mm.busy = false;
10797 if (INTEL_INFO(dev)->gen >= 6)
10798 gen6_rps_idle(dev->dev_private);
10800 intel_runtime_pm_put(dev_priv);
10803 static void intel_crtc_destroy(struct drm_crtc *crtc)
10805 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10806 struct drm_device *dev = crtc->dev;
10807 struct intel_unpin_work *work;
10809 spin_lock_irq(&dev->event_lock);
10810 work = intel_crtc->unpin_work;
10811 intel_crtc->unpin_work = NULL;
10812 spin_unlock_irq(&dev->event_lock);
10815 cancel_work_sync(&work->work);
10819 drm_crtc_cleanup(crtc);
10824 static void intel_unpin_work_fn(struct work_struct *__work)
10826 struct intel_unpin_work *work =
10827 container_of(__work, struct intel_unpin_work, work);
10828 struct intel_crtc *crtc = to_intel_crtc(work->crtc);
10829 struct drm_device *dev = crtc->base.dev;
10830 struct drm_plane *primary = crtc->base.primary;
10832 mutex_lock(&dev->struct_mutex);
10833 intel_unpin_fb_obj(work->old_fb, primary->state->rotation);
10834 drm_gem_object_unreference(&work->pending_flip_obj->base);
10836 if (work->flip_queued_req)
10837 i915_gem_request_assign(&work->flip_queued_req, NULL);
10838 mutex_unlock(&dev->struct_mutex);
10840 intel_frontbuffer_flip_complete(dev, to_intel_plane(primary)->frontbuffer_bit);
10841 intel_fbc_post_update(crtc);
10842 drm_framebuffer_unreference(work->old_fb);
10844 BUG_ON(atomic_read(&crtc->unpin_work_count) == 0);
10845 atomic_dec(&crtc->unpin_work_count);
10850 static void do_intel_finish_page_flip(struct drm_device *dev,
10851 struct drm_crtc *crtc)
10853 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10854 struct intel_unpin_work *work;
10855 unsigned long flags;
10857 /* Ignore early vblank irqs */
10858 if (intel_crtc == NULL)
10862 * This is called both by irq handlers and the reset code (to complete
10863 * lost pageflips) so needs the full irqsave spinlocks.
10865 spin_lock_irqsave(&dev->event_lock, flags);
10866 work = intel_crtc->unpin_work;
10868 /* Ensure we don't miss a work->pending update ... */
10871 if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
10872 spin_unlock_irqrestore(&dev->event_lock, flags);
10876 page_flip_completed(intel_crtc);
10878 spin_unlock_irqrestore(&dev->event_lock, flags);
10881 void intel_finish_page_flip(struct drm_device *dev, int pipe)
10883 struct drm_i915_private *dev_priv = dev->dev_private;
10884 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
10886 do_intel_finish_page_flip(dev, crtc);
10889 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
10891 struct drm_i915_private *dev_priv = dev->dev_private;
10892 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
10894 do_intel_finish_page_flip(dev, crtc);
10897 /* Is 'a' after or equal to 'b'? */
10898 static bool g4x_flip_count_after_eq(u32 a, u32 b)
10900 return !((a - b) & 0x80000000);
10903 static bool page_flip_finished(struct intel_crtc *crtc)
10905 struct drm_device *dev = crtc->base.dev;
10906 struct drm_i915_private *dev_priv = dev->dev_private;
10908 if (i915_reset_in_progress(&dev_priv->gpu_error) ||
10909 crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
10913 * The relevant registers doen't exist on pre-ctg.
10914 * As the flip done interrupt doesn't trigger for mmio
10915 * flips on gmch platforms, a flip count check isn't
10916 * really needed there. But since ctg has the registers,
10917 * include it in the check anyway.
10919 if (INTEL_INFO(dev)->gen < 5 && !IS_G4X(dev))
10923 * BDW signals flip done immediately if the plane
10924 * is disabled, even if the plane enable is already
10925 * armed to occur at the next vblank :(
10929 * A DSPSURFLIVE check isn't enough in case the mmio and CS flips
10930 * used the same base address. In that case the mmio flip might
10931 * have completed, but the CS hasn't even executed the flip yet.
10933 * A flip count check isn't enough as the CS might have updated
10934 * the base address just after start of vblank, but before we
10935 * managed to process the interrupt. This means we'd complete the
10936 * CS flip too soon.
10938 * Combining both checks should get us a good enough result. It may
10939 * still happen that the CS flip has been executed, but has not
10940 * yet actually completed. But in case the base address is the same
10941 * anyway, we don't really care.
10943 return (I915_READ(DSPSURFLIVE(crtc->plane)) & ~0xfff) ==
10944 crtc->unpin_work->gtt_offset &&
10945 g4x_flip_count_after_eq(I915_READ(PIPE_FLIPCOUNT_G4X(crtc->pipe)),
10946 crtc->unpin_work->flip_count);
10949 void intel_prepare_page_flip(struct drm_device *dev, int plane)
10951 struct drm_i915_private *dev_priv = dev->dev_private;
10952 struct intel_crtc *intel_crtc =
10953 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
10954 unsigned long flags;
10958 * This is called both by irq handlers and the reset code (to complete
10959 * lost pageflips) so needs the full irqsave spinlocks.
10961 * NB: An MMIO update of the plane base pointer will also
10962 * generate a page-flip completion irq, i.e. every modeset
10963 * is also accompanied by a spurious intel_prepare_page_flip().
10965 spin_lock_irqsave(&dev->event_lock, flags);
10966 if (intel_crtc->unpin_work && page_flip_finished(intel_crtc))
10967 atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
10968 spin_unlock_irqrestore(&dev->event_lock, flags);
10971 static inline void intel_mark_page_flip_active(struct intel_unpin_work *work)
10973 /* Ensure that the work item is consistent when activating it ... */
10975 atomic_set(&work->pending, INTEL_FLIP_PENDING);
10976 /* and that it is marked active as soon as the irq could fire. */
10980 static int intel_gen2_queue_flip(struct drm_device *dev,
10981 struct drm_crtc *crtc,
10982 struct drm_framebuffer *fb,
10983 struct drm_i915_gem_object *obj,
10984 struct drm_i915_gem_request *req,
10987 struct intel_engine_cs *engine = req->ring;
10988 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10992 ret = intel_ring_begin(req, 6);
10996 /* Can't queue multiple flips, so wait for the previous
10997 * one to finish before executing the next.
10999 if (intel_crtc->plane)
11000 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
11002 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
11003 intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
11004 intel_ring_emit(engine, MI_NOOP);
11005 intel_ring_emit(engine, MI_DISPLAY_FLIP |
11006 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11007 intel_ring_emit(engine, fb->pitches[0]);
11008 intel_ring_emit(engine, intel_crtc->unpin_work->gtt_offset);
11009 intel_ring_emit(engine, 0); /* aux display base address, unused */
11011 intel_mark_page_flip_active(intel_crtc->unpin_work);
11015 static int intel_gen3_queue_flip(struct drm_device *dev,
11016 struct drm_crtc *crtc,
11017 struct drm_framebuffer *fb,
11018 struct drm_i915_gem_object *obj,
11019 struct drm_i915_gem_request *req,
11022 struct intel_engine_cs *engine = req->ring;
11023 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11027 ret = intel_ring_begin(req, 6);
11031 if (intel_crtc->plane)
11032 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
11034 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
11035 intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
11036 intel_ring_emit(engine, MI_NOOP);
11037 intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 |
11038 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11039 intel_ring_emit(engine, fb->pitches[0]);
11040 intel_ring_emit(engine, intel_crtc->unpin_work->gtt_offset);
11041 intel_ring_emit(engine, MI_NOOP);
11043 intel_mark_page_flip_active(intel_crtc->unpin_work);
11047 static int intel_gen4_queue_flip(struct drm_device *dev,
11048 struct drm_crtc *crtc,
11049 struct drm_framebuffer *fb,
11050 struct drm_i915_gem_object *obj,
11051 struct drm_i915_gem_request *req,
11054 struct intel_engine_cs *engine = req->ring;
11055 struct drm_i915_private *dev_priv = dev->dev_private;
11056 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11057 uint32_t pf, pipesrc;
11060 ret = intel_ring_begin(req, 4);
11064 /* i965+ uses the linear or tiled offsets from the
11065 * Display Registers (which do not change across a page-flip)
11066 * so we need only reprogram the base address.
11068 intel_ring_emit(engine, MI_DISPLAY_FLIP |
11069 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11070 intel_ring_emit(engine, fb->pitches[0]);
11071 intel_ring_emit(engine, intel_crtc->unpin_work->gtt_offset |
11074 /* XXX Enabling the panel-fitter across page-flip is so far
11075 * untested on non-native modes, so ignore it for now.
11076 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
11079 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
11080 intel_ring_emit(engine, pf | pipesrc);
11082 intel_mark_page_flip_active(intel_crtc->unpin_work);
11086 static int intel_gen6_queue_flip(struct drm_device *dev,
11087 struct drm_crtc *crtc,
11088 struct drm_framebuffer *fb,
11089 struct drm_i915_gem_object *obj,
11090 struct drm_i915_gem_request *req,
11093 struct intel_engine_cs *engine = req->ring;
11094 struct drm_i915_private *dev_priv = dev->dev_private;
11095 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11096 uint32_t pf, pipesrc;
11099 ret = intel_ring_begin(req, 4);
11103 intel_ring_emit(engine, MI_DISPLAY_FLIP |
11104 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11105 intel_ring_emit(engine, fb->pitches[0] | obj->tiling_mode);
11106 intel_ring_emit(engine, intel_crtc->unpin_work->gtt_offset);
11108 /* Contrary to the suggestions in the documentation,
11109 * "Enable Panel Fitter" does not seem to be required when page
11110 * flipping with a non-native mode, and worse causes a normal
11112 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
11115 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
11116 intel_ring_emit(engine, pf | pipesrc);
11118 intel_mark_page_flip_active(intel_crtc->unpin_work);
11122 static int intel_gen7_queue_flip(struct drm_device *dev,
11123 struct drm_crtc *crtc,
11124 struct drm_framebuffer *fb,
11125 struct drm_i915_gem_object *obj,
11126 struct drm_i915_gem_request *req,
11129 struct intel_engine_cs *engine = req->ring;
11130 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11131 uint32_t plane_bit = 0;
11134 switch (intel_crtc->plane) {
11136 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
11139 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
11142 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
11145 WARN_ONCE(1, "unknown plane in flip command\n");
11150 if (engine->id == RCS) {
11153 * On Gen 8, SRM is now taking an extra dword to accommodate
11154 * 48bits addresses, and we need a NOOP for the batch size to
11162 * BSpec MI_DISPLAY_FLIP for IVB:
11163 * "The full packet must be contained within the same cache line."
11165 * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
11166 * cacheline, if we ever start emitting more commands before
11167 * the MI_DISPLAY_FLIP we may need to first emit everything else,
11168 * then do the cacheline alignment, and finally emit the
11171 ret = intel_ring_cacheline_align(req);
11175 ret = intel_ring_begin(req, len);
11179 /* Unmask the flip-done completion message. Note that the bspec says that
11180 * we should do this for both the BCS and RCS, and that we must not unmask
11181 * more than one flip event at any time (or ensure that one flip message
11182 * can be sent by waiting for flip-done prior to queueing new flips).
11183 * Experimentation says that BCS works despite DERRMR masking all
11184 * flip-done completion events and that unmasking all planes at once
11185 * for the RCS also doesn't appear to drop events. Setting the DERRMR
11186 * to zero does lead to lockups within MI_DISPLAY_FLIP.
11188 if (engine->id == RCS) {
11189 intel_ring_emit(engine, MI_LOAD_REGISTER_IMM(1));
11190 intel_ring_emit_reg(engine, DERRMR);
11191 intel_ring_emit(engine, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
11192 DERRMR_PIPEB_PRI_FLIP_DONE |
11193 DERRMR_PIPEC_PRI_FLIP_DONE));
11195 intel_ring_emit(engine, MI_STORE_REGISTER_MEM_GEN8 |
11196 MI_SRM_LRM_GLOBAL_GTT);
11198 intel_ring_emit(engine, MI_STORE_REGISTER_MEM |
11199 MI_SRM_LRM_GLOBAL_GTT);
11200 intel_ring_emit_reg(engine, DERRMR);
11201 intel_ring_emit(engine, engine->scratch.gtt_offset + 256);
11202 if (IS_GEN8(dev)) {
11203 intel_ring_emit(engine, 0);
11204 intel_ring_emit(engine, MI_NOOP);
11208 intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 | plane_bit);
11209 intel_ring_emit(engine, (fb->pitches[0] | obj->tiling_mode));
11210 intel_ring_emit(engine, intel_crtc->unpin_work->gtt_offset);
11211 intel_ring_emit(engine, (MI_NOOP));
11213 intel_mark_page_flip_active(intel_crtc->unpin_work);
11217 static bool use_mmio_flip(struct intel_engine_cs *engine,
11218 struct drm_i915_gem_object *obj)
11221 * This is not being used for older platforms, because
11222 * non-availability of flip done interrupt forces us to use
11223 * CS flips. Older platforms derive flip done using some clever
11224 * tricks involving the flip_pending status bits and vblank irqs.
11225 * So using MMIO flips there would disrupt this mechanism.
11228 if (engine == NULL)
11231 if (INTEL_INFO(engine->dev)->gen < 5)
11234 if (i915.use_mmio_flip < 0)
11236 else if (i915.use_mmio_flip > 0)
11238 else if (i915.enable_execlists)
11240 else if (obj->base.dma_buf &&
11241 !reservation_object_test_signaled_rcu(obj->base.dma_buf->resv,
11245 return engine != i915_gem_request_get_ring(obj->last_write_req);
11248 static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
11249 unsigned int rotation,
11250 struct intel_unpin_work *work)
11252 struct drm_device *dev = intel_crtc->base.dev;
11253 struct drm_i915_private *dev_priv = dev->dev_private;
11254 struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
11255 const enum pipe pipe = intel_crtc->pipe;
11256 u32 ctl, stride, tile_height;
11258 ctl = I915_READ(PLANE_CTL(pipe, 0));
11259 ctl &= ~PLANE_CTL_TILED_MASK;
11260 switch (fb->modifier[0]) {
11261 case DRM_FORMAT_MOD_NONE:
11263 case I915_FORMAT_MOD_X_TILED:
11264 ctl |= PLANE_CTL_TILED_X;
11266 case I915_FORMAT_MOD_Y_TILED:
11267 ctl |= PLANE_CTL_TILED_Y;
11269 case I915_FORMAT_MOD_Yf_TILED:
11270 ctl |= PLANE_CTL_TILED_YF;
11273 MISSING_CASE(fb->modifier[0]);
11277 * The stride is either expressed as a multiple of 64 bytes chunks for
11278 * linear buffers or in number of tiles for tiled buffers.
11280 if (intel_rotation_90_or_270(rotation)) {
11281 /* stride = Surface height in tiles */
11282 tile_height = intel_tile_height(dev_priv, fb->modifier[0], 0);
11283 stride = DIV_ROUND_UP(fb->height, tile_height);
11285 stride = fb->pitches[0] /
11286 intel_fb_stride_alignment(dev_priv, fb->modifier[0],
11291 * Both PLANE_CTL and PLANE_STRIDE are not updated on vblank but on
11292 * PLANE_SURF updates, the update is then guaranteed to be atomic.
11294 I915_WRITE(PLANE_CTL(pipe, 0), ctl);
11295 I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
11297 I915_WRITE(PLANE_SURF(pipe, 0), work->gtt_offset);
11298 POSTING_READ(PLANE_SURF(pipe, 0));
11301 static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc,
11302 struct intel_unpin_work *work)
11304 struct drm_device *dev = intel_crtc->base.dev;
11305 struct drm_i915_private *dev_priv = dev->dev_private;
11306 struct intel_framebuffer *intel_fb =
11307 to_intel_framebuffer(intel_crtc->base.primary->fb);
11308 struct drm_i915_gem_object *obj = intel_fb->obj;
11309 i915_reg_t reg = DSPCNTR(intel_crtc->plane);
11312 dspcntr = I915_READ(reg);
11314 if (obj->tiling_mode != I915_TILING_NONE)
11315 dspcntr |= DISPPLANE_TILED;
11317 dspcntr &= ~DISPPLANE_TILED;
11319 I915_WRITE(reg, dspcntr);
11321 I915_WRITE(DSPSURF(intel_crtc->plane), work->gtt_offset);
11322 POSTING_READ(DSPSURF(intel_crtc->plane));
11326 * XXX: This is the temporary way to update the plane registers until we get
11327 * around to using the usual plane update functions for MMIO flips
11329 static void intel_do_mmio_flip(struct intel_mmio_flip *mmio_flip)
11331 struct intel_crtc *crtc = mmio_flip->crtc;
11332 struct intel_unpin_work *work;
11334 spin_lock_irq(&crtc->base.dev->event_lock);
11335 work = crtc->unpin_work;
11336 spin_unlock_irq(&crtc->base.dev->event_lock);
11340 intel_mark_page_flip_active(work);
11342 intel_pipe_update_start(crtc);
11344 if (INTEL_INFO(mmio_flip->i915)->gen >= 9)
11345 skl_do_mmio_flip(crtc, mmio_flip->rotation, work);
11347 /* use_mmio_flip() retricts MMIO flips to ilk+ */
11348 ilk_do_mmio_flip(crtc, work);
11350 intel_pipe_update_end(crtc);
11353 static void intel_mmio_flip_work_func(struct work_struct *work)
11355 struct intel_mmio_flip *mmio_flip =
11356 container_of(work, struct intel_mmio_flip, work);
11357 struct intel_framebuffer *intel_fb =
11358 to_intel_framebuffer(mmio_flip->crtc->base.primary->fb);
11359 struct drm_i915_gem_object *obj = intel_fb->obj;
11361 if (mmio_flip->req) {
11362 WARN_ON(__i915_wait_request(mmio_flip->req,
11363 mmio_flip->crtc->reset_counter,
11365 &mmio_flip->i915->rps.mmioflips));
11366 i915_gem_request_unreference__unlocked(mmio_flip->req);
11369 /* For framebuffer backed by dmabuf, wait for fence */
11370 if (obj->base.dma_buf)
11371 WARN_ON(reservation_object_wait_timeout_rcu(obj->base.dma_buf->resv,
11373 MAX_SCHEDULE_TIMEOUT) < 0);
11375 intel_do_mmio_flip(mmio_flip);
11379 static int intel_queue_mmio_flip(struct drm_device *dev,
11380 struct drm_crtc *crtc,
11381 struct drm_i915_gem_object *obj)
11383 struct intel_mmio_flip *mmio_flip;
11385 mmio_flip = kmalloc(sizeof(*mmio_flip), GFP_KERNEL);
11386 if (mmio_flip == NULL)
11389 mmio_flip->i915 = to_i915(dev);
11390 mmio_flip->req = i915_gem_request_reference(obj->last_write_req);
11391 mmio_flip->crtc = to_intel_crtc(crtc);
11392 mmio_flip->rotation = crtc->primary->state->rotation;
11394 INIT_WORK(&mmio_flip->work, intel_mmio_flip_work_func);
11395 schedule_work(&mmio_flip->work);
11400 static int intel_default_queue_flip(struct drm_device *dev,
11401 struct drm_crtc *crtc,
11402 struct drm_framebuffer *fb,
11403 struct drm_i915_gem_object *obj,
11404 struct drm_i915_gem_request *req,
11410 static bool __intel_pageflip_stall_check(struct drm_device *dev,
11411 struct drm_crtc *crtc)
11413 struct drm_i915_private *dev_priv = dev->dev_private;
11414 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11415 struct intel_unpin_work *work = intel_crtc->unpin_work;
11418 if (atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE)
11421 if (atomic_read(&work->pending) < INTEL_FLIP_PENDING)
11424 if (!work->enable_stall_check)
11427 if (work->flip_ready_vblank == 0) {
11428 if (work->flip_queued_req &&
11429 !i915_gem_request_completed(work->flip_queued_req, true))
11432 work->flip_ready_vblank = drm_crtc_vblank_count(crtc);
11435 if (drm_crtc_vblank_count(crtc) - work->flip_ready_vblank < 3)
11438 /* Potential stall - if we see that the flip has happened,
11439 * assume a missed interrupt. */
11440 if (INTEL_INFO(dev)->gen >= 4)
11441 addr = I915_HI_DISPBASE(I915_READ(DSPSURF(intel_crtc->plane)));
11443 addr = I915_READ(DSPADDR(intel_crtc->plane));
11445 /* There is a potential issue here with a false positive after a flip
11446 * to the same address. We could address this by checking for a
11447 * non-incrementing frame counter.
11449 return addr == work->gtt_offset;
11452 void intel_check_page_flip(struct drm_device *dev, int pipe)
11454 struct drm_i915_private *dev_priv = dev->dev_private;
11455 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
11456 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11457 struct intel_unpin_work *work;
11459 WARN_ON(!in_interrupt());
11464 spin_lock(&dev->event_lock);
11465 work = intel_crtc->unpin_work;
11466 if (work != NULL && __intel_pageflip_stall_check(dev, crtc)) {
11467 WARN_ONCE(1, "Kicking stuck page flip: queued at %d, now %d\n",
11468 work->flip_queued_vblank, drm_vblank_count(dev, pipe));
11469 page_flip_completed(intel_crtc);
11472 if (work != NULL &&
11473 drm_vblank_count(dev, pipe) - work->flip_queued_vblank > 1)
11474 intel_queue_rps_boost_for_request(dev, work->flip_queued_req);
11475 spin_unlock(&dev->event_lock);
11478 static int intel_crtc_page_flip(struct drm_crtc *crtc,
11479 struct drm_framebuffer *fb,
11480 struct drm_pending_vblank_event *event,
11481 uint32_t page_flip_flags)
11483 struct drm_device *dev = crtc->dev;
11484 struct drm_i915_private *dev_priv = dev->dev_private;
11485 struct drm_framebuffer *old_fb = crtc->primary->fb;
11486 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
11487 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11488 struct drm_plane *primary = crtc->primary;
11489 enum pipe pipe = intel_crtc->pipe;
11490 struct intel_unpin_work *work;
11491 struct intel_engine_cs *engine;
11493 struct drm_i915_gem_request *request = NULL;
11497 * drm_mode_page_flip_ioctl() should already catch this, but double
11498 * check to be safe. In the future we may enable pageflipping from
11499 * a disabled primary plane.
11501 if (WARN_ON(intel_fb_obj(old_fb) == NULL))
11504 /* Can't change pixel format via MI display flips. */
11505 if (fb->pixel_format != crtc->primary->fb->pixel_format)
11509 * TILEOFF/LINOFF registers can't be changed via MI display flips.
11510 * Note that pitch changes could also affect these register.
11512 if (INTEL_INFO(dev)->gen > 3 &&
11513 (fb->offsets[0] != crtc->primary->fb->offsets[0] ||
11514 fb->pitches[0] != crtc->primary->fb->pitches[0]))
11517 if (i915_terminally_wedged(&dev_priv->gpu_error))
11520 work = kzalloc(sizeof(*work), GFP_KERNEL);
11524 work->event = event;
11526 work->old_fb = old_fb;
11527 INIT_WORK(&work->work, intel_unpin_work_fn);
11529 ret = drm_crtc_vblank_get(crtc);
11533 /* We borrow the event spin lock for protecting unpin_work */
11534 spin_lock_irq(&dev->event_lock);
11535 if (intel_crtc->unpin_work) {
11536 /* Before declaring the flip queue wedged, check if
11537 * the hardware completed the operation behind our backs.
11539 if (__intel_pageflip_stall_check(dev, crtc)) {
11540 DRM_DEBUG_DRIVER("flip queue: previous flip completed, continuing\n");
11541 page_flip_completed(intel_crtc);
11543 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
11544 spin_unlock_irq(&dev->event_lock);
11546 drm_crtc_vblank_put(crtc);
11551 intel_crtc->unpin_work = work;
11552 spin_unlock_irq(&dev->event_lock);
11554 if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
11555 flush_workqueue(dev_priv->wq);
11557 /* Reference the objects for the scheduled work. */
11558 drm_framebuffer_reference(work->old_fb);
11559 drm_gem_object_reference(&obj->base);
11561 crtc->primary->fb = fb;
11562 update_state_fb(crtc->primary);
11563 intel_fbc_pre_update(intel_crtc);
11565 work->pending_flip_obj = obj;
11567 ret = i915_mutex_lock_interruptible(dev);
11571 atomic_inc(&intel_crtc->unpin_work_count);
11572 intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
11574 if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
11575 work->flip_count = I915_READ(PIPE_FLIPCOUNT_G4X(pipe)) + 1;
11577 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
11578 engine = &dev_priv->ring[BCS];
11579 if (obj->tiling_mode != intel_fb_obj(work->old_fb)->tiling_mode)
11580 /* vlv: DISPLAY_FLIP fails to change tiling */
11582 } else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
11583 engine = &dev_priv->ring[BCS];
11584 } else if (INTEL_INFO(dev)->gen >= 7) {
11585 engine = i915_gem_request_get_ring(obj->last_write_req);
11586 if (engine == NULL || engine->id != RCS)
11587 engine = &dev_priv->ring[BCS];
11589 engine = &dev_priv->ring[RCS];
11592 mmio_flip = use_mmio_flip(engine, obj);
11594 /* When using CS flips, we want to emit semaphores between rings.
11595 * However, when using mmio flips we will create a task to do the
11596 * synchronisation, so all we want here is to pin the framebuffer
11597 * into the display plane and skip any waits.
11600 ret = i915_gem_object_sync(obj, engine, &request);
11602 goto cleanup_pending;
11605 ret = intel_pin_and_fence_fb_obj(fb, primary->state->rotation);
11607 goto cleanup_pending;
11609 work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary),
11611 work->gtt_offset += intel_crtc->dspaddr_offset;
11614 ret = intel_queue_mmio_flip(dev, crtc, obj);
11616 goto cleanup_unpin;
11618 i915_gem_request_assign(&work->flip_queued_req,
11619 obj->last_write_req);
11622 request = i915_gem_request_alloc(engine, NULL);
11623 if (IS_ERR(request)) {
11624 ret = PTR_ERR(request);
11625 goto cleanup_unpin;
11629 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, request,
11632 goto cleanup_unpin;
11634 i915_gem_request_assign(&work->flip_queued_req, request);
11638 i915_add_request_no_flush(request);
11640 work->flip_queued_vblank = drm_crtc_vblank_count(crtc);
11641 work->enable_stall_check = true;
11643 i915_gem_track_fb(intel_fb_obj(work->old_fb), obj,
11644 to_intel_plane(primary)->frontbuffer_bit);
11645 mutex_unlock(&dev->struct_mutex);
11647 intel_frontbuffer_flip_prepare(dev,
11648 to_intel_plane(primary)->frontbuffer_bit);
11650 trace_i915_flip_request(intel_crtc->plane, obj);
11655 intel_unpin_fb_obj(fb, crtc->primary->state->rotation);
11657 if (!IS_ERR_OR_NULL(request))
11658 i915_gem_request_cancel(request);
11659 atomic_dec(&intel_crtc->unpin_work_count);
11660 mutex_unlock(&dev->struct_mutex);
11662 crtc->primary->fb = old_fb;
11663 update_state_fb(crtc->primary);
11665 drm_gem_object_unreference_unlocked(&obj->base);
11666 drm_framebuffer_unreference(work->old_fb);
11668 spin_lock_irq(&dev->event_lock);
11669 intel_crtc->unpin_work = NULL;
11670 spin_unlock_irq(&dev->event_lock);
11672 drm_crtc_vblank_put(crtc);
11677 struct drm_atomic_state *state;
11678 struct drm_plane_state *plane_state;
11681 state = drm_atomic_state_alloc(dev);
11684 state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
11687 plane_state = drm_atomic_get_plane_state(state, primary);
11688 ret = PTR_ERR_OR_ZERO(plane_state);
11690 drm_atomic_set_fb_for_plane(plane_state, fb);
11692 ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
11694 ret = drm_atomic_commit(state);
11697 if (ret == -EDEADLK) {
11698 drm_modeset_backoff(state->acquire_ctx);
11699 drm_atomic_state_clear(state);
11704 drm_atomic_state_free(state);
11706 if (ret == 0 && event) {
11707 spin_lock_irq(&dev->event_lock);
11708 drm_send_vblank_event(dev, pipe, event);
11709 spin_unlock_irq(&dev->event_lock);
11717 * intel_wm_need_update - Check whether watermarks need updating
11718 * @plane: drm plane
11719 * @state: new plane state
11721 * Check current plane state versus the new one to determine whether
11722 * watermarks need to be recalculated.
11724 * Returns true or false.
11726 static bool intel_wm_need_update(struct drm_plane *plane,
11727 struct drm_plane_state *state)
11729 struct intel_plane_state *new = to_intel_plane_state(state);
11730 struct intel_plane_state *cur = to_intel_plane_state(plane->state);
11732 /* Update watermarks on tiling or size changes. */
11733 if (new->visible != cur->visible)
11736 if (!cur->base.fb || !new->base.fb)
11739 if (cur->base.fb->modifier[0] != new->base.fb->modifier[0] ||
11740 cur->base.rotation != new->base.rotation ||
11741 drm_rect_width(&new->src) != drm_rect_width(&cur->src) ||
11742 drm_rect_height(&new->src) != drm_rect_height(&cur->src) ||
11743 drm_rect_width(&new->dst) != drm_rect_width(&cur->dst) ||
11744 drm_rect_height(&new->dst) != drm_rect_height(&cur->dst))
11750 static bool needs_scaling(struct intel_plane_state *state)
11752 int src_w = drm_rect_width(&state->src) >> 16;
11753 int src_h = drm_rect_height(&state->src) >> 16;
11754 int dst_w = drm_rect_width(&state->dst);
11755 int dst_h = drm_rect_height(&state->dst);
11757 return (src_w != dst_w || src_h != dst_h);
11760 int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
11761 struct drm_plane_state *plane_state)
11763 struct intel_crtc_state *pipe_config = to_intel_crtc_state(crtc_state);
11764 struct drm_crtc *crtc = crtc_state->crtc;
11765 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11766 struct drm_plane *plane = plane_state->plane;
11767 struct drm_device *dev = crtc->dev;
11768 struct drm_i915_private *dev_priv = to_i915(dev);
11769 struct intel_plane_state *old_plane_state =
11770 to_intel_plane_state(plane->state);
11771 int idx = intel_crtc->base.base.id, ret;
11772 bool mode_changed = needs_modeset(crtc_state);
11773 bool was_crtc_enabled = crtc->state->active;
11774 bool is_crtc_enabled = crtc_state->active;
11775 bool turn_off, turn_on, visible, was_visible;
11776 struct drm_framebuffer *fb = plane_state->fb;
11778 if (crtc_state && INTEL_INFO(dev)->gen >= 9 &&
11779 plane->type != DRM_PLANE_TYPE_CURSOR) {
11780 ret = skl_update_scaler_plane(
11781 to_intel_crtc_state(crtc_state),
11782 to_intel_plane_state(plane_state));
11787 was_visible = old_plane_state->visible;
11788 visible = to_intel_plane_state(plane_state)->visible;
11790 if (!was_crtc_enabled && WARN_ON(was_visible))
11791 was_visible = false;
11794 * Visibility is calculated as if the crtc was on, but
11795 * after scaler setup everything depends on it being off
11796 * when the crtc isn't active.
11798 if (!is_crtc_enabled)
11799 to_intel_plane_state(plane_state)->visible = visible = false;
11801 if (!was_visible && !visible)
11804 if (fb != old_plane_state->base.fb)
11805 pipe_config->fb_changed = true;
11807 turn_off = was_visible && (!visible || mode_changed);
11808 turn_on = visible && (!was_visible || mode_changed);
11810 DRM_DEBUG_ATOMIC("[CRTC:%i] has [PLANE:%i] with fb %i\n", idx,
11811 plane->base.id, fb ? fb->base.id : -1);
11813 DRM_DEBUG_ATOMIC("[PLANE:%i] visible %i -> %i, off %i, on %i, ms %i\n",
11814 plane->base.id, was_visible, visible,
11815 turn_off, turn_on, mode_changed);
11818 pipe_config->update_wm_pre = true;
11820 /* must disable cxsr around plane enable/disable */
11821 if (plane->type != DRM_PLANE_TYPE_CURSOR)
11822 pipe_config->disable_cxsr = true;
11823 } else if (turn_off) {
11824 pipe_config->update_wm_post = true;
11826 /* must disable cxsr around plane enable/disable */
11827 if (plane->type != DRM_PLANE_TYPE_CURSOR)
11828 pipe_config->disable_cxsr = true;
11829 } else if (intel_wm_need_update(plane, plane_state)) {
11830 /* FIXME bollocks */
11831 pipe_config->update_wm_pre = true;
11832 pipe_config->update_wm_post = true;
11835 /* Pre-gen9 platforms need two-step watermark updates */
11836 if ((pipe_config->update_wm_pre || pipe_config->update_wm_post) &&
11837 INTEL_INFO(dev)->gen < 9 && dev_priv->display.optimize_watermarks)
11838 to_intel_crtc_state(crtc_state)->wm.need_postvbl_update = true;
11840 if (visible || was_visible)
11841 pipe_config->fb_bits |= to_intel_plane(plane)->frontbuffer_bit;
11844 * WaCxSRDisabledForSpriteScaling:ivb
11846 * cstate->update_wm was already set above, so this flag will
11847 * take effect when we commit and program watermarks.
11849 if (plane->type == DRM_PLANE_TYPE_OVERLAY && IS_IVYBRIDGE(dev) &&
11850 needs_scaling(to_intel_plane_state(plane_state)) &&
11851 !needs_scaling(old_plane_state))
11852 pipe_config->disable_lp_wm = true;
11857 static bool encoders_cloneable(const struct intel_encoder *a,
11858 const struct intel_encoder *b)
11860 /* masks could be asymmetric, so check both ways */
11861 return a == b || (a->cloneable & (1 << b->type) &&
11862 b->cloneable & (1 << a->type));
11865 static bool check_single_encoder_cloning(struct drm_atomic_state *state,
11866 struct intel_crtc *crtc,
11867 struct intel_encoder *encoder)
11869 struct intel_encoder *source_encoder;
11870 struct drm_connector *connector;
11871 struct drm_connector_state *connector_state;
11874 for_each_connector_in_state(state, connector, connector_state, i) {
11875 if (connector_state->crtc != &crtc->base)
11879 to_intel_encoder(connector_state->best_encoder);
11880 if (!encoders_cloneable(encoder, source_encoder))
11887 static bool check_encoder_cloning(struct drm_atomic_state *state,
11888 struct intel_crtc *crtc)
11890 struct intel_encoder *encoder;
11891 struct drm_connector *connector;
11892 struct drm_connector_state *connector_state;
11895 for_each_connector_in_state(state, connector, connector_state, i) {
11896 if (connector_state->crtc != &crtc->base)
11899 encoder = to_intel_encoder(connector_state->best_encoder);
11900 if (!check_single_encoder_cloning(state, crtc, encoder))
11907 static int intel_crtc_atomic_check(struct drm_crtc *crtc,
11908 struct drm_crtc_state *crtc_state)
11910 struct drm_device *dev = crtc->dev;
11911 struct drm_i915_private *dev_priv = dev->dev_private;
11912 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11913 struct intel_crtc_state *pipe_config =
11914 to_intel_crtc_state(crtc_state);
11915 struct drm_atomic_state *state = crtc_state->state;
11917 bool mode_changed = needs_modeset(crtc_state);
11919 if (mode_changed && !check_encoder_cloning(state, intel_crtc)) {
11920 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
11924 if (mode_changed && !crtc_state->active)
11925 pipe_config->update_wm_post = true;
11927 if (mode_changed && crtc_state->enable &&
11928 dev_priv->display.crtc_compute_clock &&
11929 !WARN_ON(pipe_config->shared_dpll)) {
11930 ret = dev_priv->display.crtc_compute_clock(intel_crtc,
11937 if (dev_priv->display.compute_pipe_wm) {
11938 ret = dev_priv->display.compute_pipe_wm(pipe_config);
11940 DRM_DEBUG_KMS("Target pipe watermarks are invalid\n");
11945 if (dev_priv->display.compute_intermediate_wm &&
11946 !to_intel_atomic_state(state)->skip_intermediate_wm) {
11947 if (WARN_ON(!dev_priv->display.compute_pipe_wm))
11951 * Calculate 'intermediate' watermarks that satisfy both the
11952 * old state and the new state. We can program these
11955 ret = dev_priv->display.compute_intermediate_wm(crtc->dev,
11959 DRM_DEBUG_KMS("No valid intermediate pipe watermarks are possible\n");
11964 if (INTEL_INFO(dev)->gen >= 9) {
11966 ret = skl_update_scaler_crtc(pipe_config);
11969 ret = intel_atomic_setup_scalers(dev, intel_crtc,
11976 static const struct drm_crtc_helper_funcs intel_helper_funcs = {
11977 .mode_set_base_atomic = intel_pipe_set_base_atomic,
11978 .load_lut = intel_crtc_load_lut,
11979 .atomic_begin = intel_begin_crtc_commit,
11980 .atomic_flush = intel_finish_crtc_commit,
11981 .atomic_check = intel_crtc_atomic_check,
11984 static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
11986 struct intel_connector *connector;
11988 for_each_intel_connector(dev, connector) {
11989 if (connector->base.encoder) {
11990 connector->base.state->best_encoder =
11991 connector->base.encoder;
11992 connector->base.state->crtc =
11993 connector->base.encoder->crtc;
11995 connector->base.state->best_encoder = NULL;
11996 connector->base.state->crtc = NULL;
12002 connected_sink_compute_bpp(struct intel_connector *connector,
12003 struct intel_crtc_state *pipe_config)
12005 int bpp = pipe_config->pipe_bpp;
12007 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
12008 connector->base.base.id,
12009 connector->base.name);
12011 /* Don't use an invalid EDID bpc value */
12012 if (connector->base.display_info.bpc &&
12013 connector->base.display_info.bpc * 3 < bpp) {
12014 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
12015 bpp, connector->base.display_info.bpc*3);
12016 pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
12019 /* Clamp bpp to default limit on screens without EDID 1.4 */
12020 if (connector->base.display_info.bpc == 0) {
12021 int type = connector->base.connector_type;
12022 int clamp_bpp = 24;
12024 /* Fall back to 18 bpp when DP sink capability is unknown. */
12025 if (type == DRM_MODE_CONNECTOR_DisplayPort ||
12026 type == DRM_MODE_CONNECTOR_eDP)
12029 if (bpp > clamp_bpp) {
12030 DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of %d\n",
12032 pipe_config->pipe_bpp = clamp_bpp;
12038 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
12039 struct intel_crtc_state *pipe_config)
12041 struct drm_device *dev = crtc->base.dev;
12042 struct drm_atomic_state *state;
12043 struct drm_connector *connector;
12044 struct drm_connector_state *connector_state;
12047 if ((IS_G4X(dev) || IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)))
12049 else if (INTEL_INFO(dev)->gen >= 5)
12055 pipe_config->pipe_bpp = bpp;
12057 state = pipe_config->base.state;
12059 /* Clamp display bpp to EDID value */
12060 for_each_connector_in_state(state, connector, connector_state, i) {
12061 if (connector_state->crtc != &crtc->base)
12064 connected_sink_compute_bpp(to_intel_connector(connector),
12071 static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
12073 DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
12074 "type: 0x%x flags: 0x%x\n",
12076 mode->crtc_hdisplay, mode->crtc_hsync_start,
12077 mode->crtc_hsync_end, mode->crtc_htotal,
12078 mode->crtc_vdisplay, mode->crtc_vsync_start,
12079 mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags);
12082 static void intel_dump_pipe_config(struct intel_crtc *crtc,
12083 struct intel_crtc_state *pipe_config,
12084 const char *context)
12086 struct drm_device *dev = crtc->base.dev;
12087 struct drm_plane *plane;
12088 struct intel_plane *intel_plane;
12089 struct intel_plane_state *state;
12090 struct drm_framebuffer *fb;
12092 DRM_DEBUG_KMS("[CRTC:%d]%s config %p for pipe %c\n", crtc->base.base.id,
12093 context, pipe_config, pipe_name(crtc->pipe));
12095 DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder));
12096 DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
12097 pipe_config->pipe_bpp, pipe_config->dither);
12098 DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
12099 pipe_config->has_pch_encoder,
12100 pipe_config->fdi_lanes,
12101 pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
12102 pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
12103 pipe_config->fdi_m_n.tu);
12104 DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
12105 pipe_config->has_dp_encoder,
12106 pipe_config->lane_count,
12107 pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
12108 pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
12109 pipe_config->dp_m_n.tu);
12111 DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
12112 pipe_config->has_dp_encoder,
12113 pipe_config->lane_count,
12114 pipe_config->dp_m2_n2.gmch_m,
12115 pipe_config->dp_m2_n2.gmch_n,
12116 pipe_config->dp_m2_n2.link_m,
12117 pipe_config->dp_m2_n2.link_n,
12118 pipe_config->dp_m2_n2.tu);
12120 DRM_DEBUG_KMS("audio: %i, infoframes: %i\n",
12121 pipe_config->has_audio,
12122 pipe_config->has_infoframe);
12124 DRM_DEBUG_KMS("requested mode:\n");
12125 drm_mode_debug_printmodeline(&pipe_config->base.mode);
12126 DRM_DEBUG_KMS("adjusted mode:\n");
12127 drm_mode_debug_printmodeline(&pipe_config->base.adjusted_mode);
12128 intel_dump_crtc_timings(&pipe_config->base.adjusted_mode);
12129 DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
12130 DRM_DEBUG_KMS("pipe src size: %dx%d\n",
12131 pipe_config->pipe_src_w, pipe_config->pipe_src_h);
12132 DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
12134 pipe_config->scaler_state.scaler_users,
12135 pipe_config->scaler_state.scaler_id);
12136 DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
12137 pipe_config->gmch_pfit.control,
12138 pipe_config->gmch_pfit.pgm_ratios,
12139 pipe_config->gmch_pfit.lvds_border_bits);
12140 DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
12141 pipe_config->pch_pfit.pos,
12142 pipe_config->pch_pfit.size,
12143 pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
12144 DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
12145 DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
12147 if (IS_BROXTON(dev)) {
12148 DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x,"
12149 "pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, "
12150 "pll6: 0x%x, pll8: 0x%x, pll9: 0x%x, pll10: 0x%x, pcsdw12: 0x%x\n",
12151 pipe_config->ddi_pll_sel,
12152 pipe_config->dpll_hw_state.ebb0,
12153 pipe_config->dpll_hw_state.ebb4,
12154 pipe_config->dpll_hw_state.pll0,
12155 pipe_config->dpll_hw_state.pll1,
12156 pipe_config->dpll_hw_state.pll2,
12157 pipe_config->dpll_hw_state.pll3,
12158 pipe_config->dpll_hw_state.pll6,
12159 pipe_config->dpll_hw_state.pll8,
12160 pipe_config->dpll_hw_state.pll9,
12161 pipe_config->dpll_hw_state.pll10,
12162 pipe_config->dpll_hw_state.pcsdw12);
12163 } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
12164 DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: "
12165 "ctrl1: 0x%x, cfgcr1: 0x%x, cfgcr2: 0x%x\n",
12166 pipe_config->ddi_pll_sel,
12167 pipe_config->dpll_hw_state.ctrl1,
12168 pipe_config->dpll_hw_state.cfgcr1,
12169 pipe_config->dpll_hw_state.cfgcr2);
12170 } else if (HAS_DDI(dev)) {
12171 DRM_DEBUG_KMS("ddi_pll_sel: 0x%x; dpll_hw_state: wrpll: 0x%x spll: 0x%x\n",
12172 pipe_config->ddi_pll_sel,
12173 pipe_config->dpll_hw_state.wrpll,
12174 pipe_config->dpll_hw_state.spll);
12176 DRM_DEBUG_KMS("dpll_hw_state: dpll: 0x%x, dpll_md: 0x%x, "
12177 "fp0: 0x%x, fp1: 0x%x\n",
12178 pipe_config->dpll_hw_state.dpll,
12179 pipe_config->dpll_hw_state.dpll_md,
12180 pipe_config->dpll_hw_state.fp0,
12181 pipe_config->dpll_hw_state.fp1);
12184 DRM_DEBUG_KMS("planes on this crtc\n");
12185 list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
12186 intel_plane = to_intel_plane(plane);
12187 if (intel_plane->pipe != crtc->pipe)
12190 state = to_intel_plane_state(plane->state);
12191 fb = state->base.fb;
12193 DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d "
12194 "disabled, scaler_id = %d\n",
12195 plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
12196 plane->base.id, intel_plane->pipe,
12197 (crtc->base.primary == plane) ? 0 : intel_plane->plane + 1,
12198 drm_plane_index(plane), state->scaler_id);
12202 DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d enabled",
12203 plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
12204 plane->base.id, intel_plane->pipe,
12205 crtc->base.primary == plane ? 0 : intel_plane->plane + 1,
12206 drm_plane_index(plane));
12207 DRM_DEBUG_KMS("\tFB:%d, fb = %ux%u format = 0x%x",
12208 fb->base.id, fb->width, fb->height, fb->pixel_format);
12209 DRM_DEBUG_KMS("\tscaler:%d src (%u, %u) %ux%u dst (%u, %u) %ux%u\n",
12211 state->src.x1 >> 16, state->src.y1 >> 16,
12212 drm_rect_width(&state->src) >> 16,
12213 drm_rect_height(&state->src) >> 16,
12214 state->dst.x1, state->dst.y1,
12215 drm_rect_width(&state->dst), drm_rect_height(&state->dst));
12219 static bool check_digital_port_conflicts(struct drm_atomic_state *state)
12221 struct drm_device *dev = state->dev;
12222 struct drm_connector *connector;
12223 unsigned int used_ports = 0;
12226 * Walk the connector list instead of the encoder
12227 * list to detect the problem on ddi platforms
12228 * where there's just one encoder per digital port.
12230 drm_for_each_connector(connector, dev) {
12231 struct drm_connector_state *connector_state;
12232 struct intel_encoder *encoder;
12234 connector_state = drm_atomic_get_existing_connector_state(state, connector);
12235 if (!connector_state)
12236 connector_state = connector->state;
12238 if (!connector_state->best_encoder)
12241 encoder = to_intel_encoder(connector_state->best_encoder);
12243 WARN_ON(!connector_state->crtc);
12245 switch (encoder->type) {
12246 unsigned int port_mask;
12247 case INTEL_OUTPUT_UNKNOWN:
12248 if (WARN_ON(!HAS_DDI(dev)))
12250 case INTEL_OUTPUT_DISPLAYPORT:
12251 case INTEL_OUTPUT_HDMI:
12252 case INTEL_OUTPUT_EDP:
12253 port_mask = 1 << enc_to_dig_port(&encoder->base)->port;
12255 /* the same port mustn't appear more than once */
12256 if (used_ports & port_mask)
12259 used_ports |= port_mask;
12269 clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
12271 struct drm_crtc_state tmp_state;
12272 struct intel_crtc_scaler_state scaler_state;
12273 struct intel_dpll_hw_state dpll_hw_state;
12274 struct intel_shared_dpll *shared_dpll;
12275 uint32_t ddi_pll_sel;
12278 /* FIXME: before the switch to atomic started, a new pipe_config was
12279 * kzalloc'd. Code that depends on any field being zero should be
12280 * fixed, so that the crtc_state can be safely duplicated. For now,
12281 * only fields that are know to not cause problems are preserved. */
12283 tmp_state = crtc_state->base;
12284 scaler_state = crtc_state->scaler_state;
12285 shared_dpll = crtc_state->shared_dpll;
12286 dpll_hw_state = crtc_state->dpll_hw_state;
12287 ddi_pll_sel = crtc_state->ddi_pll_sel;
12288 force_thru = crtc_state->pch_pfit.force_thru;
12290 memset(crtc_state, 0, sizeof *crtc_state);
12292 crtc_state->base = tmp_state;
12293 crtc_state->scaler_state = scaler_state;
12294 crtc_state->shared_dpll = shared_dpll;
12295 crtc_state->dpll_hw_state = dpll_hw_state;
12296 crtc_state->ddi_pll_sel = ddi_pll_sel;
12297 crtc_state->pch_pfit.force_thru = force_thru;
12301 intel_modeset_pipe_config(struct drm_crtc *crtc,
12302 struct intel_crtc_state *pipe_config)
12304 struct drm_atomic_state *state = pipe_config->base.state;
12305 struct intel_encoder *encoder;
12306 struct drm_connector *connector;
12307 struct drm_connector_state *connector_state;
12308 int base_bpp, ret = -EINVAL;
12312 clear_intel_crtc_state(pipe_config);
12314 pipe_config->cpu_transcoder =
12315 (enum transcoder) to_intel_crtc(crtc)->pipe;
12318 * Sanitize sync polarity flags based on requested ones. If neither
12319 * positive or negative polarity is requested, treat this as meaning
12320 * negative polarity.
12322 if (!(pipe_config->base.adjusted_mode.flags &
12323 (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
12324 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
12326 if (!(pipe_config->base.adjusted_mode.flags &
12327 (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
12328 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
12330 base_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
12336 * Determine the real pipe dimensions. Note that stereo modes can
12337 * increase the actual pipe size due to the frame doubling and
12338 * insertion of additional space for blanks between the frame. This
12339 * is stored in the crtc timings. We use the requested mode to do this
12340 * computation to clearly distinguish it from the adjusted mode, which
12341 * can be changed by the connectors in the below retry loop.
12343 drm_crtc_get_hv_timing(&pipe_config->base.mode,
12344 &pipe_config->pipe_src_w,
12345 &pipe_config->pipe_src_h);
12348 /* Ensure the port clock defaults are reset when retrying. */
12349 pipe_config->port_clock = 0;
12350 pipe_config->pixel_multiplier = 1;
12352 /* Fill in default crtc timings, allow encoders to overwrite them. */
12353 drm_mode_set_crtcinfo(&pipe_config->base.adjusted_mode,
12354 CRTC_STEREO_DOUBLE);
12356 /* Pass our mode to the connectors and the CRTC to give them a chance to
12357 * adjust it according to limitations or connector properties, and also
12358 * a chance to reject the mode entirely.
12360 for_each_connector_in_state(state, connector, connector_state, i) {
12361 if (connector_state->crtc != crtc)
12364 encoder = to_intel_encoder(connector_state->best_encoder);
12366 if (!(encoder->compute_config(encoder, pipe_config))) {
12367 DRM_DEBUG_KMS("Encoder config failure\n");
12372 /* Set default port clock if not overwritten by the encoder. Needs to be
12373 * done afterwards in case the encoder adjusts the mode. */
12374 if (!pipe_config->port_clock)
12375 pipe_config->port_clock = pipe_config->base.adjusted_mode.crtc_clock
12376 * pipe_config->pixel_multiplier;
12378 ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
12380 DRM_DEBUG_KMS("CRTC fixup failed\n");
12384 if (ret == RETRY) {
12385 if (WARN(!retry, "loop in pipe configuration computation\n")) {
12390 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
12392 goto encoder_retry;
12395 /* Dithering seems to not pass-through bits correctly when it should, so
12396 * only enable it on 6bpc panels. */
12397 pipe_config->dither = pipe_config->pipe_bpp == 6*3;
12398 DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
12399 base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
12406 intel_modeset_update_crtc_state(struct drm_atomic_state *state)
12408 struct drm_crtc *crtc;
12409 struct drm_crtc_state *crtc_state;
12412 /* Double check state. */
12413 for_each_crtc_in_state(state, crtc, crtc_state, i) {
12414 to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
12416 /* Update hwmode for vblank functions */
12417 if (crtc->state->active)
12418 crtc->hwmode = crtc->state->adjusted_mode;
12420 crtc->hwmode.crtc_clock = 0;
12423 * Update legacy state to satisfy fbc code. This can
12424 * be removed when fbc uses the atomic state.
12426 if (drm_atomic_get_existing_plane_state(state, crtc->primary)) {
12427 struct drm_plane_state *plane_state = crtc->primary->state;
12429 crtc->primary->fb = plane_state->fb;
12430 crtc->x = plane_state->src_x >> 16;
12431 crtc->y = plane_state->src_y >> 16;
12436 static bool intel_fuzzy_clock_check(int clock1, int clock2)
12440 if (clock1 == clock2)
12443 if (!clock1 || !clock2)
12446 diff = abs(clock1 - clock2);
12448 if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
12454 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
12455 list_for_each_entry((intel_crtc), \
12456 &(dev)->mode_config.crtc_list, \
12458 for_each_if (mask & (1 <<(intel_crtc)->pipe))
12461 intel_compare_m_n(unsigned int m, unsigned int n,
12462 unsigned int m2, unsigned int n2,
12465 if (m == m2 && n == n2)
12468 if (exact || !m || !n || !m2 || !n2)
12471 BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);
12478 } else if (n < n2) {
12488 return intel_fuzzy_clock_check(m, m2);
12492 intel_compare_link_m_n(const struct intel_link_m_n *m_n,
12493 struct intel_link_m_n *m2_n2,
12496 if (m_n->tu == m2_n2->tu &&
12497 intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
12498 m2_n2->gmch_m, m2_n2->gmch_n, !adjust) &&
12499 intel_compare_m_n(m_n->link_m, m_n->link_n,
12500 m2_n2->link_m, m2_n2->link_n, !adjust)) {
12511 intel_pipe_config_compare(struct drm_device *dev,
12512 struct intel_crtc_state *current_config,
12513 struct intel_crtc_state *pipe_config,
12518 #define INTEL_ERR_OR_DBG_KMS(fmt, ...) \
12521 DRM_ERROR(fmt, ##__VA_ARGS__); \
12523 DRM_DEBUG_KMS(fmt, ##__VA_ARGS__); \
12526 #define PIPE_CONF_CHECK_X(name) \
12527 if (current_config->name != pipe_config->name) { \
12528 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12529 "(expected 0x%08x, found 0x%08x)\n", \
12530 current_config->name, \
12531 pipe_config->name); \
12535 #define PIPE_CONF_CHECK_I(name) \
12536 if (current_config->name != pipe_config->name) { \
12537 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12538 "(expected %i, found %i)\n", \
12539 current_config->name, \
12540 pipe_config->name); \
12544 #define PIPE_CONF_CHECK_P(name) \
12545 if (current_config->name != pipe_config->name) { \
12546 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12547 "(expected %p, found %p)\n", \
12548 current_config->name, \
12549 pipe_config->name); \
12553 #define PIPE_CONF_CHECK_M_N(name) \
12554 if (!intel_compare_link_m_n(¤t_config->name, \
12555 &pipe_config->name,\
12557 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12558 "(expected tu %i gmch %i/%i link %i/%i, " \
12559 "found tu %i, gmch %i/%i link %i/%i)\n", \
12560 current_config->name.tu, \
12561 current_config->name.gmch_m, \
12562 current_config->name.gmch_n, \
12563 current_config->name.link_m, \
12564 current_config->name.link_n, \
12565 pipe_config->name.tu, \
12566 pipe_config->name.gmch_m, \
12567 pipe_config->name.gmch_n, \
12568 pipe_config->name.link_m, \
12569 pipe_config->name.link_n); \
12573 #define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \
12574 if (!intel_compare_link_m_n(¤t_config->name, \
12575 &pipe_config->name, adjust) && \
12576 !intel_compare_link_m_n(¤t_config->alt_name, \
12577 &pipe_config->name, adjust)) { \
12578 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12579 "(expected tu %i gmch %i/%i link %i/%i, " \
12580 "or tu %i gmch %i/%i link %i/%i, " \
12581 "found tu %i, gmch %i/%i link %i/%i)\n", \
12582 current_config->name.tu, \
12583 current_config->name.gmch_m, \
12584 current_config->name.gmch_n, \
12585 current_config->name.link_m, \
12586 current_config->name.link_n, \
12587 current_config->alt_name.tu, \
12588 current_config->alt_name.gmch_m, \
12589 current_config->alt_name.gmch_n, \
12590 current_config->alt_name.link_m, \
12591 current_config->alt_name.link_n, \
12592 pipe_config->name.tu, \
12593 pipe_config->name.gmch_m, \
12594 pipe_config->name.gmch_n, \
12595 pipe_config->name.link_m, \
12596 pipe_config->name.link_n); \
12600 /* This is required for BDW+ where there is only one set of registers for
12601 * switching between high and low RR.
12602 * This macro can be used whenever a comparison has to be made between one
12603 * hw state and multiple sw state variables.
12605 #define PIPE_CONF_CHECK_I_ALT(name, alt_name) \
12606 if ((current_config->name != pipe_config->name) && \
12607 (current_config->alt_name != pipe_config->name)) { \
12608 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12609 "(expected %i or %i, found %i)\n", \
12610 current_config->name, \
12611 current_config->alt_name, \
12612 pipe_config->name); \
12616 #define PIPE_CONF_CHECK_FLAGS(name, mask) \
12617 if ((current_config->name ^ pipe_config->name) & (mask)) { \
12618 INTEL_ERR_OR_DBG_KMS("mismatch in " #name "(" #mask ") " \
12619 "(expected %i, found %i)\n", \
12620 current_config->name & (mask), \
12621 pipe_config->name & (mask)); \
12625 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
12626 if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
12627 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12628 "(expected %i, found %i)\n", \
12629 current_config->name, \
12630 pipe_config->name); \
12634 #define PIPE_CONF_QUIRK(quirk) \
12635 ((current_config->quirks | pipe_config->quirks) & (quirk))
12637 PIPE_CONF_CHECK_I(cpu_transcoder);
12639 PIPE_CONF_CHECK_I(has_pch_encoder);
12640 PIPE_CONF_CHECK_I(fdi_lanes);
12641 PIPE_CONF_CHECK_M_N(fdi_m_n);
12643 PIPE_CONF_CHECK_I(has_dp_encoder);
12644 PIPE_CONF_CHECK_I(lane_count);
12646 if (INTEL_INFO(dev)->gen < 8) {
12647 PIPE_CONF_CHECK_M_N(dp_m_n);
12649 if (current_config->has_drrs)
12650 PIPE_CONF_CHECK_M_N(dp_m2_n2);
12652 PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
12654 PIPE_CONF_CHECK_I(has_dsi_encoder);
12656 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
12657 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
12658 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_start);
12659 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_end);
12660 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_start);
12661 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_end);
12663 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vdisplay);
12664 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vtotal);
12665 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_start);
12666 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_end);
12667 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_start);
12668 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_end);
12670 PIPE_CONF_CHECK_I(pixel_multiplier);
12671 PIPE_CONF_CHECK_I(has_hdmi_sink);
12672 if ((INTEL_INFO(dev)->gen < 8 && !IS_HASWELL(dev)) ||
12673 IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
12674 PIPE_CONF_CHECK_I(limited_color_range);
12675 PIPE_CONF_CHECK_I(has_infoframe);
12677 PIPE_CONF_CHECK_I(has_audio);
12679 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12680 DRM_MODE_FLAG_INTERLACE);
12682 if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
12683 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12684 DRM_MODE_FLAG_PHSYNC);
12685 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12686 DRM_MODE_FLAG_NHSYNC);
12687 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12688 DRM_MODE_FLAG_PVSYNC);
12689 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12690 DRM_MODE_FLAG_NVSYNC);
12693 PIPE_CONF_CHECK_X(gmch_pfit.control);
12694 /* pfit ratios are autocomputed by the hw on gen4+ */
12695 if (INTEL_INFO(dev)->gen < 4)
12696 PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
12697 PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);
12700 PIPE_CONF_CHECK_I(pipe_src_w);
12701 PIPE_CONF_CHECK_I(pipe_src_h);
12703 PIPE_CONF_CHECK_I(pch_pfit.enabled);
12704 if (current_config->pch_pfit.enabled) {
12705 PIPE_CONF_CHECK_X(pch_pfit.pos);
12706 PIPE_CONF_CHECK_X(pch_pfit.size);
12709 PIPE_CONF_CHECK_I(scaler_state.scaler_id);
12712 /* BDW+ don't expose a synchronous way to read the state */
12713 if (IS_HASWELL(dev))
12714 PIPE_CONF_CHECK_I(ips_enabled);
12716 PIPE_CONF_CHECK_I(double_wide);
12718 PIPE_CONF_CHECK_X(ddi_pll_sel);
12720 PIPE_CONF_CHECK_P(shared_dpll);
12721 PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
12722 PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
12723 PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
12724 PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
12725 PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
12726 PIPE_CONF_CHECK_X(dpll_hw_state.spll);
12727 PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1);
12728 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1);
12729 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2);
12731 if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
12732 PIPE_CONF_CHECK_I(pipe_bpp);
12734 PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.crtc_clock);
12735 PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
12737 #undef PIPE_CONF_CHECK_X
12738 #undef PIPE_CONF_CHECK_I
12739 #undef PIPE_CONF_CHECK_P
12740 #undef PIPE_CONF_CHECK_I_ALT
12741 #undef PIPE_CONF_CHECK_FLAGS
12742 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
12743 #undef PIPE_CONF_QUIRK
12744 #undef INTEL_ERR_OR_DBG_KMS
12749 static void intel_pipe_config_sanity_check(struct drm_i915_private *dev_priv,
12750 const struct intel_crtc_state *pipe_config)
12752 if (pipe_config->has_pch_encoder) {
12753 int fdi_dotclock = intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
12754 &pipe_config->fdi_m_n);
12755 int dotclock = pipe_config->base.adjusted_mode.crtc_clock;
12758 * FDI already provided one idea for the dotclock.
12759 * Yell if the encoder disagrees.
12761 WARN(!intel_fuzzy_clock_check(fdi_dotclock, dotclock),
12762 "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
12763 fdi_dotclock, dotclock);
12767 static void check_wm_state(struct drm_device *dev)
12769 struct drm_i915_private *dev_priv = dev->dev_private;
12770 struct skl_ddb_allocation hw_ddb, *sw_ddb;
12771 struct intel_crtc *intel_crtc;
12774 if (INTEL_INFO(dev)->gen < 9)
12777 skl_ddb_get_hw_state(dev_priv, &hw_ddb);
12778 sw_ddb = &dev_priv->wm.skl_hw.ddb;
12780 for_each_intel_crtc(dev, intel_crtc) {
12781 struct skl_ddb_entry *hw_entry, *sw_entry;
12782 const enum pipe pipe = intel_crtc->pipe;
12784 if (!intel_crtc->active)
12788 for_each_plane(dev_priv, pipe, plane) {
12789 hw_entry = &hw_ddb.plane[pipe][plane];
12790 sw_entry = &sw_ddb->plane[pipe][plane];
12792 if (skl_ddb_entry_equal(hw_entry, sw_entry))
12795 DRM_ERROR("mismatch in DDB state pipe %c plane %d "
12796 "(expected (%u,%u), found (%u,%u))\n",
12797 pipe_name(pipe), plane + 1,
12798 sw_entry->start, sw_entry->end,
12799 hw_entry->start, hw_entry->end);
12803 hw_entry = &hw_ddb.plane[pipe][PLANE_CURSOR];
12804 sw_entry = &sw_ddb->plane[pipe][PLANE_CURSOR];
12806 if (skl_ddb_entry_equal(hw_entry, sw_entry))
12809 DRM_ERROR("mismatch in DDB state pipe %c cursor "
12810 "(expected (%u,%u), found (%u,%u))\n",
12812 sw_entry->start, sw_entry->end,
12813 hw_entry->start, hw_entry->end);
12818 check_connector_state(struct drm_device *dev,
12819 struct drm_atomic_state *old_state)
12821 struct drm_connector_state *old_conn_state;
12822 struct drm_connector *connector;
12825 for_each_connector_in_state(old_state, connector, old_conn_state, i) {
12826 struct drm_encoder *encoder = connector->encoder;
12827 struct drm_connector_state *state = connector->state;
12829 /* This also checks the encoder/connector hw state with the
12830 * ->get_hw_state callbacks. */
12831 intel_connector_check_state(to_intel_connector(connector));
12833 I915_STATE_WARN(state->best_encoder != encoder,
12834 "connector's atomic encoder doesn't match legacy encoder\n");
12839 check_encoder_state(struct drm_device *dev)
12841 struct intel_encoder *encoder;
12842 struct intel_connector *connector;
12844 for_each_intel_encoder(dev, encoder) {
12845 bool enabled = false;
12848 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
12849 encoder->base.base.id,
12850 encoder->base.name);
12852 for_each_intel_connector(dev, connector) {
12853 if (connector->base.state->best_encoder != &encoder->base)
12857 I915_STATE_WARN(connector->base.state->crtc !=
12858 encoder->base.crtc,
12859 "connector's crtc doesn't match encoder crtc\n");
12862 I915_STATE_WARN(!!encoder->base.crtc != enabled,
12863 "encoder's enabled state mismatch "
12864 "(expected %i, found %i)\n",
12865 !!encoder->base.crtc, enabled);
12867 if (!encoder->base.crtc) {
12870 active = encoder->get_hw_state(encoder, &pipe);
12871 I915_STATE_WARN(active,
12872 "encoder detached but still enabled on pipe %c.\n",
12879 check_crtc_state(struct drm_device *dev, struct drm_atomic_state *old_state)
12881 struct drm_i915_private *dev_priv = dev->dev_private;
12882 struct intel_encoder *encoder;
12883 struct drm_crtc_state *old_crtc_state;
12884 struct drm_crtc *crtc;
12887 for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) {
12888 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
12889 struct intel_crtc_state *pipe_config, *sw_config;
12892 if (!needs_modeset(crtc->state) &&
12893 !to_intel_crtc_state(crtc->state)->update_pipe)
12896 __drm_atomic_helper_crtc_destroy_state(crtc, old_crtc_state);
12897 pipe_config = to_intel_crtc_state(old_crtc_state);
12898 memset(pipe_config, 0, sizeof(*pipe_config));
12899 pipe_config->base.crtc = crtc;
12900 pipe_config->base.state = old_state;
12902 DRM_DEBUG_KMS("[CRTC:%d]\n",
12905 active = dev_priv->display.get_pipe_config(intel_crtc,
12908 /* hw state is inconsistent with the pipe quirk */
12909 if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
12910 (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
12911 active = crtc->state->active;
12913 I915_STATE_WARN(crtc->state->active != active,
12914 "crtc active state doesn't match with hw state "
12915 "(expected %i, found %i)\n", crtc->state->active, active);
12917 I915_STATE_WARN(intel_crtc->active != crtc->state->active,
12918 "transitional active state does not match atomic hw state "
12919 "(expected %i, found %i)\n", crtc->state->active, intel_crtc->active);
12921 for_each_encoder_on_crtc(dev, crtc, encoder) {
12924 active = encoder->get_hw_state(encoder, &pipe);
12925 I915_STATE_WARN(active != crtc->state->active,
12926 "[ENCODER:%i] active %i with crtc active %i\n",
12927 encoder->base.base.id, active, crtc->state->active);
12929 I915_STATE_WARN(active && intel_crtc->pipe != pipe,
12930 "Encoder connected to wrong pipe %c\n",
12934 encoder->get_config(encoder, pipe_config);
12937 if (!crtc->state->active)
12940 intel_pipe_config_sanity_check(dev_priv, pipe_config);
12942 sw_config = to_intel_crtc_state(crtc->state);
12943 if (!intel_pipe_config_compare(dev, sw_config,
12944 pipe_config, false)) {
12945 I915_STATE_WARN(1, "pipe state doesn't match!\n");
12946 intel_dump_pipe_config(intel_crtc, pipe_config,
12948 intel_dump_pipe_config(intel_crtc, sw_config,
12955 check_shared_dpll_state(struct drm_device *dev)
12957 struct drm_i915_private *dev_priv = dev->dev_private;
12958 struct intel_crtc *crtc;
12959 struct intel_dpll_hw_state dpll_hw_state;
12962 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
12963 struct intel_shared_dpll *pll =
12964 intel_get_shared_dpll_by_id(dev_priv, i);
12965 int enabled_crtcs = 0, active_crtcs = 0;
12968 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
12970 DRM_DEBUG_KMS("%s\n", pll->name);
12972 active = pll->funcs.get_hw_state(dev_priv, pll, &dpll_hw_state);
12974 I915_STATE_WARN(pll->active > hweight32(pll->config.crtc_mask),
12975 "more active pll users than references: %i vs %i\n",
12976 pll->active, hweight32(pll->config.crtc_mask));
12977 I915_STATE_WARN(pll->active && !pll->on,
12978 "pll in active use but not on in sw tracking\n");
12980 if (!(pll->flags & INTEL_DPLL_ALWAYS_ON)) {
12981 I915_STATE_WARN(pll->on && !pll->active,
12982 "pll in on but not on in use in sw tracking\n");
12983 I915_STATE_WARN(pll->on != active,
12984 "pll on state mismatch (expected %i, found %i)\n",
12988 for_each_intel_crtc(dev, crtc) {
12989 if (crtc->base.state->enable && crtc->config->shared_dpll == pll)
12991 if (crtc->active && crtc->config->shared_dpll == pll)
12994 I915_STATE_WARN(pll->active != active_crtcs,
12995 "pll active crtcs mismatch (expected %i, found %i)\n",
12996 pll->active, active_crtcs);
12997 I915_STATE_WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
12998 "pll enabled crtcs mismatch (expected %i, found %i)\n",
12999 hweight32(pll->config.crtc_mask), enabled_crtcs);
13001 I915_STATE_WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
13002 sizeof(dpll_hw_state)),
13003 "pll hw state mismatch\n");
13008 intel_modeset_check_state(struct drm_device *dev,
13009 struct drm_atomic_state *old_state)
13011 check_wm_state(dev);
13012 check_connector_state(dev, old_state);
13013 check_encoder_state(dev);
13014 check_crtc_state(dev, old_state);
13015 check_shared_dpll_state(dev);
13018 static void update_scanline_offset(struct intel_crtc *crtc)
13020 struct drm_device *dev = crtc->base.dev;
13023 * The scanline counter increments at the leading edge of hsync.
13025 * On most platforms it starts counting from vtotal-1 on the
13026 * first active line. That means the scanline counter value is
13027 * always one less than what we would expect. Ie. just after
13028 * start of vblank, which also occurs at start of hsync (on the
13029 * last active line), the scanline counter will read vblank_start-1.
13031 * On gen2 the scanline counter starts counting from 1 instead
13032 * of vtotal-1, so we have to subtract one (or rather add vtotal-1
13033 * to keep the value positive), instead of adding one.
13035 * On HSW+ the behaviour of the scanline counter depends on the output
13036 * type. For DP ports it behaves like most other platforms, but on HDMI
13037 * there's an extra 1 line difference. So we need to add two instead of
13038 * one to the value.
13040 if (IS_GEN2(dev)) {
13041 const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
13044 vtotal = adjusted_mode->crtc_vtotal;
13045 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
13048 crtc->scanline_offset = vtotal - 1;
13049 } else if (HAS_DDI(dev) &&
13050 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
13051 crtc->scanline_offset = 2;
13053 crtc->scanline_offset = 1;
13056 static void intel_modeset_clear_plls(struct drm_atomic_state *state)
13058 struct drm_device *dev = state->dev;
13059 struct drm_i915_private *dev_priv = to_i915(dev);
13060 struct intel_shared_dpll_config *shared_dpll = NULL;
13061 struct drm_crtc *crtc;
13062 struct drm_crtc_state *crtc_state;
13065 if (!dev_priv->display.crtc_compute_clock)
13068 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13069 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13070 struct intel_shared_dpll *old_dpll =
13071 to_intel_crtc_state(crtc->state)->shared_dpll;
13073 if (!needs_modeset(crtc_state))
13076 to_intel_crtc_state(crtc_state)->shared_dpll = NULL;
13082 shared_dpll = intel_atomic_get_shared_dpll_state(state);
13084 intel_shared_dpll_config_put(shared_dpll, old_dpll, intel_crtc);
13089 * This implements the workaround described in the "notes" section of the mode
13090 * set sequence documentation. When going from no pipes or single pipe to
13091 * multiple pipes, and planes are enabled after the pipe, we need to wait at
13092 * least 2 vblanks on the first pipe before enabling planes on the second pipe.
13094 static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
13096 struct drm_crtc_state *crtc_state;
13097 struct intel_crtc *intel_crtc;
13098 struct drm_crtc *crtc;
13099 struct intel_crtc_state *first_crtc_state = NULL;
13100 struct intel_crtc_state *other_crtc_state = NULL;
13101 enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
13104 /* look at all crtc's that are going to be enabled in during modeset */
13105 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13106 intel_crtc = to_intel_crtc(crtc);
13108 if (!crtc_state->active || !needs_modeset(crtc_state))
13111 if (first_crtc_state) {
13112 other_crtc_state = to_intel_crtc_state(crtc_state);
13115 first_crtc_state = to_intel_crtc_state(crtc_state);
13116 first_pipe = intel_crtc->pipe;
13120 /* No workaround needed? */
13121 if (!first_crtc_state)
13124 /* w/a possibly needed, check how many crtc's are already enabled. */
13125 for_each_intel_crtc(state->dev, intel_crtc) {
13126 struct intel_crtc_state *pipe_config;
13128 pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
13129 if (IS_ERR(pipe_config))
13130 return PTR_ERR(pipe_config);
13132 pipe_config->hsw_workaround_pipe = INVALID_PIPE;
13134 if (!pipe_config->base.active ||
13135 needs_modeset(&pipe_config->base))
13138 /* 2 or more enabled crtcs means no need for w/a */
13139 if (enabled_pipe != INVALID_PIPE)
13142 enabled_pipe = intel_crtc->pipe;
13145 if (enabled_pipe != INVALID_PIPE)
13146 first_crtc_state->hsw_workaround_pipe = enabled_pipe;
13147 else if (other_crtc_state)
13148 other_crtc_state->hsw_workaround_pipe = first_pipe;
13153 static int intel_modeset_all_pipes(struct drm_atomic_state *state)
13155 struct drm_crtc *crtc;
13156 struct drm_crtc_state *crtc_state;
13159 /* add all active pipes to the state */
13160 for_each_crtc(state->dev, crtc) {
13161 crtc_state = drm_atomic_get_crtc_state(state, crtc);
13162 if (IS_ERR(crtc_state))
13163 return PTR_ERR(crtc_state);
13165 if (!crtc_state->active || needs_modeset(crtc_state))
13168 crtc_state->mode_changed = true;
13170 ret = drm_atomic_add_affected_connectors(state, crtc);
13174 ret = drm_atomic_add_affected_planes(state, crtc);
13182 static int intel_modeset_checks(struct drm_atomic_state *state)
13184 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13185 struct drm_i915_private *dev_priv = state->dev->dev_private;
13186 struct drm_crtc *crtc;
13187 struct drm_crtc_state *crtc_state;
13190 if (!check_digital_port_conflicts(state)) {
13191 DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
13195 intel_state->modeset = true;
13196 intel_state->active_crtcs = dev_priv->active_crtcs;
13198 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13199 if (crtc_state->active)
13200 intel_state->active_crtcs |= 1 << i;
13202 intel_state->active_crtcs &= ~(1 << i);
13206 * See if the config requires any additional preparation, e.g.
13207 * to adjust global state with pipes off. We need to do this
13208 * here so we can get the modeset_pipe updated config for the new
13209 * mode set on this crtc. For other crtcs we need to use the
13210 * adjusted_mode bits in the crtc directly.
13212 if (dev_priv->display.modeset_calc_cdclk) {
13213 ret = dev_priv->display.modeset_calc_cdclk(state);
13215 if (!ret && intel_state->dev_cdclk != dev_priv->cdclk_freq)
13216 ret = intel_modeset_all_pipes(state);
13221 DRM_DEBUG_KMS("New cdclk calculated to be atomic %u, actual %u\n",
13222 intel_state->cdclk, intel_state->dev_cdclk);
13224 to_intel_atomic_state(state)->cdclk = dev_priv->atomic_cdclk_freq;
13226 intel_modeset_clear_plls(state);
13228 if (IS_HASWELL(dev_priv))
13229 return haswell_mode_set_planes_workaround(state);
13235 * Handle calculation of various watermark data at the end of the atomic check
13236 * phase. The code here should be run after the per-crtc and per-plane 'check'
13237 * handlers to ensure that all derived state has been updated.
13239 static void calc_watermark_data(struct drm_atomic_state *state)
13241 struct drm_device *dev = state->dev;
13242 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13243 struct drm_crtc *crtc;
13244 struct drm_crtc_state *cstate;
13245 struct drm_plane *plane;
13246 struct drm_plane_state *pstate;
13249 * Calculate watermark configuration details now that derived
13250 * plane/crtc state is all properly updated.
13252 drm_for_each_crtc(crtc, dev) {
13253 cstate = drm_atomic_get_existing_crtc_state(state, crtc) ?:
13256 if (cstate->active)
13257 intel_state->wm_config.num_pipes_active++;
13259 drm_for_each_legacy_plane(plane, dev) {
13260 pstate = drm_atomic_get_existing_plane_state(state, plane) ?:
13263 if (!to_intel_plane_state(pstate)->visible)
13266 intel_state->wm_config.sprites_enabled = true;
13267 if (pstate->crtc_w != pstate->src_w >> 16 ||
13268 pstate->crtc_h != pstate->src_h >> 16)
13269 intel_state->wm_config.sprites_scaled = true;
13274 * intel_atomic_check - validate state object
13276 * @state: state to validate
13278 static int intel_atomic_check(struct drm_device *dev,
13279 struct drm_atomic_state *state)
13281 struct drm_i915_private *dev_priv = to_i915(dev);
13282 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13283 struct drm_crtc *crtc;
13284 struct drm_crtc_state *crtc_state;
13286 bool any_ms = false;
13288 ret = drm_atomic_helper_check_modeset(dev, state);
13292 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13293 struct intel_crtc_state *pipe_config =
13294 to_intel_crtc_state(crtc_state);
13296 /* Catch I915_MODE_FLAG_INHERITED */
13297 if (crtc_state->mode.private_flags != crtc->state->mode.private_flags)
13298 crtc_state->mode_changed = true;
13300 if (!crtc_state->enable) {
13301 if (needs_modeset(crtc_state))
13306 if (!needs_modeset(crtc_state))
13309 /* FIXME: For only active_changed we shouldn't need to do any
13310 * state recomputation at all. */
13312 ret = drm_atomic_add_affected_connectors(state, crtc);
13316 ret = intel_modeset_pipe_config(crtc, pipe_config);
13320 if (i915.fastboot &&
13321 intel_pipe_config_compare(dev,
13322 to_intel_crtc_state(crtc->state),
13323 pipe_config, true)) {
13324 crtc_state->mode_changed = false;
13325 to_intel_crtc_state(crtc_state)->update_pipe = true;
13328 if (needs_modeset(crtc_state)) {
13331 ret = drm_atomic_add_affected_planes(state, crtc);
13336 intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
13337 needs_modeset(crtc_state) ?
13338 "[modeset]" : "[fastset]");
13342 ret = intel_modeset_checks(state);
13347 intel_state->cdclk = dev_priv->cdclk_freq;
13349 ret = drm_atomic_helper_check_planes(dev, state);
13353 intel_fbc_choose_crtc(dev_priv, state);
13354 calc_watermark_data(state);
13359 static int intel_atomic_prepare_commit(struct drm_device *dev,
13360 struct drm_atomic_state *state,
13363 struct drm_i915_private *dev_priv = dev->dev_private;
13364 struct drm_plane_state *plane_state;
13365 struct drm_crtc_state *crtc_state;
13366 struct drm_plane *plane;
13367 struct drm_crtc *crtc;
13371 DRM_DEBUG_KMS("i915 does not yet support async commit\n");
13375 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13376 ret = intel_crtc_wait_for_pending_flips(crtc);
13380 if (atomic_read(&to_intel_crtc(crtc)->unpin_work_count) >= 2)
13381 flush_workqueue(dev_priv->wq);
13384 ret = mutex_lock_interruptible(&dev->struct_mutex);
13388 ret = drm_atomic_helper_prepare_planes(dev, state);
13389 if (!ret && !async && !i915_reset_in_progress(&dev_priv->gpu_error)) {
13392 reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
13393 mutex_unlock(&dev->struct_mutex);
13395 for_each_plane_in_state(state, plane, plane_state, i) {
13396 struct intel_plane_state *intel_plane_state =
13397 to_intel_plane_state(plane_state);
13399 if (!intel_plane_state->wait_req)
13402 ret = __i915_wait_request(intel_plane_state->wait_req,
13403 reset_counter, true,
13406 /* Swallow -EIO errors to allow updates during hw lockup. */
13417 mutex_lock(&dev->struct_mutex);
13418 drm_atomic_helper_cleanup_planes(dev, state);
13421 mutex_unlock(&dev->struct_mutex);
13425 static void intel_atomic_wait_for_vblanks(struct drm_device *dev,
13426 struct drm_i915_private *dev_priv,
13427 unsigned crtc_mask)
13429 unsigned last_vblank_count[I915_MAX_PIPES];
13436 for_each_pipe(dev_priv, pipe) {
13437 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
13439 if (!((1 << pipe) & crtc_mask))
13442 ret = drm_crtc_vblank_get(crtc);
13443 if (WARN_ON(ret != 0)) {
13444 crtc_mask &= ~(1 << pipe);
13448 last_vblank_count[pipe] = drm_crtc_vblank_count(crtc);
13451 for_each_pipe(dev_priv, pipe) {
13452 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
13455 if (!((1 << pipe) & crtc_mask))
13458 lret = wait_event_timeout(dev->vblank[pipe].queue,
13459 last_vblank_count[pipe] !=
13460 drm_crtc_vblank_count(crtc),
13461 msecs_to_jiffies(50));
13465 drm_crtc_vblank_put(crtc);
13469 static bool needs_vblank_wait(struct intel_crtc_state *crtc_state)
13471 /* fb updated, need to unpin old fb */
13472 if (crtc_state->fb_changed)
13475 /* wm changes, need vblank before final wm's */
13476 if (crtc_state->update_wm_post)
13480 * cxsr is re-enabled after vblank.
13481 * This is already handled by crtc_state->update_wm_post,
13482 * but added for clarity.
13484 if (crtc_state->disable_cxsr)
13491 * intel_atomic_commit - commit validated state object
13493 * @state: the top-level driver state object
13494 * @async: asynchronous commit
13496 * This function commits a top-level state object that has been validated
13497 * with drm_atomic_helper_check().
13499 * FIXME: Atomic modeset support for i915 is not yet complete. At the moment
13500 * we can only handle plane-related operations and do not yet support
13501 * asynchronous commit.
13504 * Zero for success or -errno.
13506 static int intel_atomic_commit(struct drm_device *dev,
13507 struct drm_atomic_state *state,
13510 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13511 struct drm_i915_private *dev_priv = dev->dev_private;
13512 struct drm_crtc_state *old_crtc_state;
13513 struct drm_crtc *crtc;
13514 struct intel_crtc_state *intel_cstate;
13516 bool hw_check = intel_state->modeset;
13517 unsigned long put_domains[I915_MAX_PIPES] = {};
13518 unsigned crtc_vblank_mask = 0;
13520 ret = intel_atomic_prepare_commit(dev, state, async);
13522 DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret);
13526 drm_atomic_helper_swap_state(dev, state);
13527 dev_priv->wm.config = to_intel_atomic_state(state)->wm_config;
13529 if (intel_state->modeset) {
13530 memcpy(dev_priv->min_pixclk, intel_state->min_pixclk,
13531 sizeof(intel_state->min_pixclk));
13532 dev_priv->active_crtcs = intel_state->active_crtcs;
13533 dev_priv->atomic_cdclk_freq = intel_state->cdclk;
13535 intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
13538 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13539 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13541 if (needs_modeset(crtc->state) ||
13542 to_intel_crtc_state(crtc->state)->update_pipe) {
13545 put_domains[to_intel_crtc(crtc)->pipe] =
13546 modeset_get_crtc_power_domains(crtc,
13547 to_intel_crtc_state(crtc->state));
13550 if (!needs_modeset(crtc->state))
13553 intel_pre_plane_update(to_intel_crtc_state(old_crtc_state));
13555 if (old_crtc_state->active) {
13556 intel_crtc_disable_planes(crtc, old_crtc_state->plane_mask);
13557 dev_priv->display.crtc_disable(crtc);
13558 intel_crtc->active = false;
13559 intel_fbc_disable(intel_crtc);
13560 intel_disable_shared_dpll(intel_crtc);
13563 * Underruns don't always raise
13564 * interrupts, so check manually.
13566 intel_check_cpu_fifo_underruns(dev_priv);
13567 intel_check_pch_fifo_underruns(dev_priv);
13569 if (!crtc->state->active)
13570 intel_update_watermarks(crtc);
13574 /* Only after disabling all output pipelines that will be changed can we
13575 * update the the output configuration. */
13576 intel_modeset_update_crtc_state(state);
13578 if (intel_state->modeset) {
13579 intel_shared_dpll_commit(state);
13581 drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
13583 if (dev_priv->display.modeset_commit_cdclk &&
13584 intel_state->dev_cdclk != dev_priv->cdclk_freq)
13585 dev_priv->display.modeset_commit_cdclk(state);
13588 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
13589 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13590 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13591 bool modeset = needs_modeset(crtc->state);
13592 struct intel_crtc_state *pipe_config =
13593 to_intel_crtc_state(crtc->state);
13594 bool update_pipe = !modeset && pipe_config->update_pipe;
13596 if (modeset && crtc->state->active) {
13597 update_scanline_offset(to_intel_crtc(crtc));
13598 dev_priv->display.crtc_enable(crtc);
13602 intel_pre_plane_update(to_intel_crtc_state(old_crtc_state));
13604 if (crtc->state->active &&
13605 drm_atomic_get_existing_plane_state(state, crtc->primary))
13606 intel_fbc_enable(intel_crtc);
13608 if (crtc->state->active &&
13609 (crtc->state->planes_changed || update_pipe))
13610 drm_atomic_helper_commit_planes_on_crtc(old_crtc_state);
13612 if (pipe_config->base.active && needs_vblank_wait(pipe_config))
13613 crtc_vblank_mask |= 1 << i;
13616 /* FIXME: add subpixel order */
13618 if (!state->legacy_cursor_update)
13619 intel_atomic_wait_for_vblanks(dev, dev_priv, crtc_vblank_mask);
13621 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13622 intel_post_plane_update(to_intel_crtc_state(old_crtc_state));
13624 if (put_domains[i])
13625 modeset_put_power_domains(dev_priv, put_domains[i]);
13628 if (intel_state->modeset)
13629 intel_display_power_put(dev_priv, POWER_DOMAIN_MODESET);
13632 * Now that the vblank has passed, we can go ahead and program the
13633 * optimal watermarks on platforms that need two-step watermark
13636 * TODO: Move this (and other cleanup) to an async worker eventually.
13638 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13639 intel_cstate = to_intel_crtc_state(crtc->state);
13641 if (dev_priv->display.optimize_watermarks)
13642 dev_priv->display.optimize_watermarks(intel_cstate);
13645 mutex_lock(&dev->struct_mutex);
13646 drm_atomic_helper_cleanup_planes(dev, state);
13647 mutex_unlock(&dev->struct_mutex);
13650 intel_modeset_check_state(dev, state);
13652 drm_atomic_state_free(state);
13654 /* As one of the primary mmio accessors, KMS has a high likelihood
13655 * of triggering bugs in unclaimed access. After we finish
13656 * modesetting, see if an error has been flagged, and if so
13657 * enable debugging for the next modeset - and hope we catch
13660 * XXX note that we assume display power is on at this point.
13661 * This might hold true now but we need to add pm helper to check
13662 * unclaimed only when the hardware is on, as atomic commits
13663 * can happen also when the device is completely off.
13665 intel_uncore_arm_unclaimed_mmio_detection(dev_priv);
13670 void intel_crtc_restore_mode(struct drm_crtc *crtc)
13672 struct drm_device *dev = crtc->dev;
13673 struct drm_atomic_state *state;
13674 struct drm_crtc_state *crtc_state;
13677 state = drm_atomic_state_alloc(dev);
13679 DRM_DEBUG_KMS("[CRTC:%d] crtc restore failed, out of memory",
13684 state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
13687 crtc_state = drm_atomic_get_crtc_state(state, crtc);
13688 ret = PTR_ERR_OR_ZERO(crtc_state);
13690 if (!crtc_state->active)
13693 crtc_state->mode_changed = true;
13694 ret = drm_atomic_commit(state);
13697 if (ret == -EDEADLK) {
13698 drm_atomic_state_clear(state);
13699 drm_modeset_backoff(state->acquire_ctx);
13705 drm_atomic_state_free(state);
13708 #undef for_each_intel_crtc_masked
13710 static const struct drm_crtc_funcs intel_crtc_funcs = {
13711 .gamma_set = intel_crtc_gamma_set,
13712 .set_config = drm_atomic_helper_set_config,
13713 .destroy = intel_crtc_destroy,
13714 .page_flip = intel_crtc_page_flip,
13715 .atomic_duplicate_state = intel_crtc_duplicate_state,
13716 .atomic_destroy_state = intel_crtc_destroy_state,
13720 * intel_prepare_plane_fb - Prepare fb for usage on plane
13721 * @plane: drm plane to prepare for
13722 * @fb: framebuffer to prepare for presentation
13724 * Prepares a framebuffer for usage on a display plane. Generally this
13725 * involves pinning the underlying object and updating the frontbuffer tracking
13726 * bits. Some older platforms need special physical address handling for
13729 * Must be called with struct_mutex held.
13731 * Returns 0 on success, negative error code on failure.
13734 intel_prepare_plane_fb(struct drm_plane *plane,
13735 const struct drm_plane_state *new_state)
13737 struct drm_device *dev = plane->dev;
13738 struct drm_framebuffer *fb = new_state->fb;
13739 struct intel_plane *intel_plane = to_intel_plane(plane);
13740 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
13741 struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->state->fb);
13744 if (!obj && !old_obj)
13748 struct drm_crtc_state *crtc_state =
13749 drm_atomic_get_existing_crtc_state(new_state->state, plane->state->crtc);
13751 /* Big Hammer, we also need to ensure that any pending
13752 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
13753 * current scanout is retired before unpinning the old
13754 * framebuffer. Note that we rely on userspace rendering
13755 * into the buffer attached to the pipe they are waiting
13756 * on. If not, userspace generates a GPU hang with IPEHR
13757 * point to the MI_WAIT_FOR_EVENT.
13759 * This should only fail upon a hung GPU, in which case we
13760 * can safely continue.
13762 if (needs_modeset(crtc_state))
13763 ret = i915_gem_object_wait_rendering(old_obj, true);
13765 /* Swallow -EIO errors to allow updates during hw lockup. */
13766 if (ret && ret != -EIO)
13770 /* For framebuffer backed by dmabuf, wait for fence */
13771 if (obj && obj->base.dma_buf) {
13774 lret = reservation_object_wait_timeout_rcu(obj->base.dma_buf->resv,
13776 MAX_SCHEDULE_TIMEOUT);
13777 if (lret == -ERESTARTSYS)
13780 WARN(lret < 0, "waiting returns %li\n", lret);
13785 } else if (plane->type == DRM_PLANE_TYPE_CURSOR &&
13786 INTEL_INFO(dev)->cursor_needs_physical) {
13787 int align = IS_I830(dev) ? 16 * 1024 : 256;
13788 ret = i915_gem_object_attach_phys(obj, align);
13790 DRM_DEBUG_KMS("failed to attach phys object\n");
13792 ret = intel_pin_and_fence_fb_obj(fb, new_state->rotation);
13797 struct intel_plane_state *plane_state =
13798 to_intel_plane_state(new_state);
13800 i915_gem_request_assign(&plane_state->wait_req,
13801 obj->last_write_req);
13804 i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
13811 * intel_cleanup_plane_fb - Cleans up an fb after plane use
13812 * @plane: drm plane to clean up for
13813 * @fb: old framebuffer that was on plane
13815 * Cleans up a framebuffer that has just been removed from a plane.
13817 * Must be called with struct_mutex held.
13820 intel_cleanup_plane_fb(struct drm_plane *plane,
13821 const struct drm_plane_state *old_state)
13823 struct drm_device *dev = plane->dev;
13824 struct intel_plane *intel_plane = to_intel_plane(plane);
13825 struct intel_plane_state *old_intel_state;
13826 struct drm_i915_gem_object *old_obj = intel_fb_obj(old_state->fb);
13827 struct drm_i915_gem_object *obj = intel_fb_obj(plane->state->fb);
13829 old_intel_state = to_intel_plane_state(old_state);
13831 if (!obj && !old_obj)
13834 if (old_obj && (plane->type != DRM_PLANE_TYPE_CURSOR ||
13835 !INTEL_INFO(dev)->cursor_needs_physical))
13836 intel_unpin_fb_obj(old_state->fb, old_state->rotation);
13838 /* prepare_fb aborted? */
13839 if ((old_obj && (old_obj->frontbuffer_bits & intel_plane->frontbuffer_bit)) ||
13840 (obj && !(obj->frontbuffer_bits & intel_plane->frontbuffer_bit)))
13841 i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
13843 i915_gem_request_assign(&old_intel_state->wait_req, NULL);
13847 skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
13850 struct drm_device *dev;
13851 struct drm_i915_private *dev_priv;
13852 int crtc_clock, cdclk;
13854 if (!intel_crtc || !crtc_state->base.enable)
13855 return DRM_PLANE_HELPER_NO_SCALING;
13857 dev = intel_crtc->base.dev;
13858 dev_priv = dev->dev_private;
13859 crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
13860 cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk;
13862 if (WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock))
13863 return DRM_PLANE_HELPER_NO_SCALING;
13866 * skl max scale is lower of:
13867 * close to 3 but not 3, -1 is for that purpose
13871 max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
13877 intel_check_primary_plane(struct drm_plane *plane,
13878 struct intel_crtc_state *crtc_state,
13879 struct intel_plane_state *state)
13881 struct drm_crtc *crtc = state->base.crtc;
13882 struct drm_framebuffer *fb = state->base.fb;
13883 int min_scale = DRM_PLANE_HELPER_NO_SCALING;
13884 int max_scale = DRM_PLANE_HELPER_NO_SCALING;
13885 bool can_position = false;
13887 if (INTEL_INFO(plane->dev)->gen >= 9) {
13888 /* use scaler when colorkey is not required */
13889 if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
13891 max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
13893 can_position = true;
13896 return drm_plane_helper_check_update(plane, crtc, fb, &state->src,
13897 &state->dst, &state->clip,
13898 min_scale, max_scale,
13899 can_position, true,
13903 static void intel_begin_crtc_commit(struct drm_crtc *crtc,
13904 struct drm_crtc_state *old_crtc_state)
13906 struct drm_device *dev = crtc->dev;
13907 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13908 struct intel_crtc_state *old_intel_state =
13909 to_intel_crtc_state(old_crtc_state);
13910 bool modeset = needs_modeset(crtc->state);
13912 /* Perform vblank evasion around commit operation */
13913 intel_pipe_update_start(intel_crtc);
13918 if (to_intel_crtc_state(crtc->state)->update_pipe)
13919 intel_update_pipe_config(intel_crtc, old_intel_state);
13920 else if (INTEL_INFO(dev)->gen >= 9)
13921 skl_detach_scalers(intel_crtc);
13924 static void intel_finish_crtc_commit(struct drm_crtc *crtc,
13925 struct drm_crtc_state *old_crtc_state)
13927 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13929 intel_pipe_update_end(intel_crtc);
13933 * intel_plane_destroy - destroy a plane
13934 * @plane: plane to destroy
13936 * Common destruction function for all types of planes (primary, cursor,
13939 void intel_plane_destroy(struct drm_plane *plane)
13941 struct intel_plane *intel_plane = to_intel_plane(plane);
13942 drm_plane_cleanup(plane);
13943 kfree(intel_plane);
13946 const struct drm_plane_funcs intel_plane_funcs = {
13947 .update_plane = drm_atomic_helper_update_plane,
13948 .disable_plane = drm_atomic_helper_disable_plane,
13949 .destroy = intel_plane_destroy,
13950 .set_property = drm_atomic_helper_plane_set_property,
13951 .atomic_get_property = intel_plane_atomic_get_property,
13952 .atomic_set_property = intel_plane_atomic_set_property,
13953 .atomic_duplicate_state = intel_plane_duplicate_state,
13954 .atomic_destroy_state = intel_plane_destroy_state,
13958 static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
13961 struct intel_plane *primary;
13962 struct intel_plane_state *state;
13963 const uint32_t *intel_primary_formats;
13964 unsigned int num_formats;
13966 primary = kzalloc(sizeof(*primary), GFP_KERNEL);
13967 if (primary == NULL)
13970 state = intel_create_plane_state(&primary->base);
13975 primary->base.state = &state->base;
13977 primary->can_scale = false;
13978 primary->max_downscale = 1;
13979 if (INTEL_INFO(dev)->gen >= 9) {
13980 primary->can_scale = true;
13981 state->scaler_id = -1;
13983 primary->pipe = pipe;
13984 primary->plane = pipe;
13985 primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe);
13986 primary->check_plane = intel_check_primary_plane;
13987 if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
13988 primary->plane = !pipe;
13990 if (INTEL_INFO(dev)->gen >= 9) {
13991 intel_primary_formats = skl_primary_formats;
13992 num_formats = ARRAY_SIZE(skl_primary_formats);
13994 primary->update_plane = skylake_update_primary_plane;
13995 primary->disable_plane = skylake_disable_primary_plane;
13996 } else if (HAS_PCH_SPLIT(dev)) {
13997 intel_primary_formats = i965_primary_formats;
13998 num_formats = ARRAY_SIZE(i965_primary_formats);
14000 primary->update_plane = ironlake_update_primary_plane;
14001 primary->disable_plane = i9xx_disable_primary_plane;
14002 } else if (INTEL_INFO(dev)->gen >= 4) {
14003 intel_primary_formats = i965_primary_formats;
14004 num_formats = ARRAY_SIZE(i965_primary_formats);
14006 primary->update_plane = i9xx_update_primary_plane;
14007 primary->disable_plane = i9xx_disable_primary_plane;
14009 intel_primary_formats = i8xx_primary_formats;
14010 num_formats = ARRAY_SIZE(i8xx_primary_formats);
14012 primary->update_plane = i9xx_update_primary_plane;
14013 primary->disable_plane = i9xx_disable_primary_plane;
14016 drm_universal_plane_init(dev, &primary->base, 0,
14017 &intel_plane_funcs,
14018 intel_primary_formats, num_formats,
14019 DRM_PLANE_TYPE_PRIMARY, NULL);
14021 if (INTEL_INFO(dev)->gen >= 4)
14022 intel_create_rotation_property(dev, primary);
14024 drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
14026 return &primary->base;
14029 void intel_create_rotation_property(struct drm_device *dev, struct intel_plane *plane)
14031 if (!dev->mode_config.rotation_property) {
14032 unsigned long flags = BIT(DRM_ROTATE_0) |
14033 BIT(DRM_ROTATE_180);
14035 if (INTEL_INFO(dev)->gen >= 9)
14036 flags |= BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270);
14038 dev->mode_config.rotation_property =
14039 drm_mode_create_rotation_property(dev, flags);
14041 if (dev->mode_config.rotation_property)
14042 drm_object_attach_property(&plane->base.base,
14043 dev->mode_config.rotation_property,
14044 plane->base.state->rotation);
14048 intel_check_cursor_plane(struct drm_plane *plane,
14049 struct intel_crtc_state *crtc_state,
14050 struct intel_plane_state *state)
14052 struct drm_crtc *crtc = crtc_state->base.crtc;
14053 struct drm_framebuffer *fb = state->base.fb;
14054 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
14055 enum pipe pipe = to_intel_plane(plane)->pipe;
14059 ret = drm_plane_helper_check_update(plane, crtc, fb, &state->src,
14060 &state->dst, &state->clip,
14061 DRM_PLANE_HELPER_NO_SCALING,
14062 DRM_PLANE_HELPER_NO_SCALING,
14063 true, true, &state->visible);
14067 /* if we want to turn off the cursor ignore width and height */
14071 /* Check for which cursor types we support */
14072 if (!cursor_size_ok(plane->dev, state->base.crtc_w, state->base.crtc_h)) {
14073 DRM_DEBUG("Cursor dimension %dx%d not supported\n",
14074 state->base.crtc_w, state->base.crtc_h);
14078 stride = roundup_pow_of_two(state->base.crtc_w) * 4;
14079 if (obj->base.size < stride * state->base.crtc_h) {
14080 DRM_DEBUG_KMS("buffer is too small\n");
14084 if (fb->modifier[0] != DRM_FORMAT_MOD_NONE) {
14085 DRM_DEBUG_KMS("cursor cannot be tiled\n");
14090 * There's something wrong with the cursor on CHV pipe C.
14091 * If it straddles the left edge of the screen then
14092 * moving it away from the edge or disabling it often
14093 * results in a pipe underrun, and often that can lead to
14094 * dead pipe (constant underrun reported, and it scans
14095 * out just a solid color). To recover from that, the
14096 * display power well must be turned off and on again.
14097 * Refuse the put the cursor into that compromised position.
14099 if (IS_CHERRYVIEW(plane->dev) && pipe == PIPE_C &&
14100 state->visible && state->base.crtc_x < 0) {
14101 DRM_DEBUG_KMS("CHV cursor C not allowed to straddle the left screen edge\n");
14109 intel_disable_cursor_plane(struct drm_plane *plane,
14110 struct drm_crtc *crtc)
14112 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
14114 intel_crtc->cursor_addr = 0;
14115 intel_crtc_update_cursor(crtc, NULL);
14119 intel_update_cursor_plane(struct drm_plane *plane,
14120 const struct intel_crtc_state *crtc_state,
14121 const struct intel_plane_state *state)
14123 struct drm_crtc *crtc = crtc_state->base.crtc;
14124 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
14125 struct drm_device *dev = plane->dev;
14126 struct drm_i915_gem_object *obj = intel_fb_obj(state->base.fb);
14131 else if (!INTEL_INFO(dev)->cursor_needs_physical)
14132 addr = i915_gem_obj_ggtt_offset(obj);
14134 addr = obj->phys_handle->busaddr;
14136 intel_crtc->cursor_addr = addr;
14137 intel_crtc_update_cursor(crtc, state);
14140 static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
14143 struct intel_plane *cursor;
14144 struct intel_plane_state *state;
14146 cursor = kzalloc(sizeof(*cursor), GFP_KERNEL);
14147 if (cursor == NULL)
14150 state = intel_create_plane_state(&cursor->base);
14155 cursor->base.state = &state->base;
14157 cursor->can_scale = false;
14158 cursor->max_downscale = 1;
14159 cursor->pipe = pipe;
14160 cursor->plane = pipe;
14161 cursor->frontbuffer_bit = INTEL_FRONTBUFFER_CURSOR(pipe);
14162 cursor->check_plane = intel_check_cursor_plane;
14163 cursor->update_plane = intel_update_cursor_plane;
14164 cursor->disable_plane = intel_disable_cursor_plane;
14166 drm_universal_plane_init(dev, &cursor->base, 0,
14167 &intel_plane_funcs,
14168 intel_cursor_formats,
14169 ARRAY_SIZE(intel_cursor_formats),
14170 DRM_PLANE_TYPE_CURSOR, NULL);
14172 if (INTEL_INFO(dev)->gen >= 4) {
14173 if (!dev->mode_config.rotation_property)
14174 dev->mode_config.rotation_property =
14175 drm_mode_create_rotation_property(dev,
14176 BIT(DRM_ROTATE_0) |
14177 BIT(DRM_ROTATE_180));
14178 if (dev->mode_config.rotation_property)
14179 drm_object_attach_property(&cursor->base.base,
14180 dev->mode_config.rotation_property,
14181 state->base.rotation);
14184 if (INTEL_INFO(dev)->gen >=9)
14185 state->scaler_id = -1;
14187 drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
14189 return &cursor->base;
14192 static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
14193 struct intel_crtc_state *crtc_state)
14196 struct intel_scaler *intel_scaler;
14197 struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state;
14199 for (i = 0; i < intel_crtc->num_scalers; i++) {
14200 intel_scaler = &scaler_state->scalers[i];
14201 intel_scaler->in_use = 0;
14202 intel_scaler->mode = PS_SCALER_MODE_DYN;
14205 scaler_state->scaler_id = -1;
14208 static void intel_crtc_init(struct drm_device *dev, int pipe)
14210 struct drm_i915_private *dev_priv = dev->dev_private;
14211 struct intel_crtc *intel_crtc;
14212 struct intel_crtc_state *crtc_state = NULL;
14213 struct drm_plane *primary = NULL;
14214 struct drm_plane *cursor = NULL;
14217 intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
14218 if (intel_crtc == NULL)
14221 crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
14224 intel_crtc->config = crtc_state;
14225 intel_crtc->base.state = &crtc_state->base;
14226 crtc_state->base.crtc = &intel_crtc->base;
14228 /* initialize shared scalers */
14229 if (INTEL_INFO(dev)->gen >= 9) {
14230 if (pipe == PIPE_C)
14231 intel_crtc->num_scalers = 1;
14233 intel_crtc->num_scalers = SKL_NUM_SCALERS;
14235 skl_init_scalers(dev, intel_crtc, crtc_state);
14238 primary = intel_primary_plane_create(dev, pipe);
14242 cursor = intel_cursor_plane_create(dev, pipe);
14246 ret = drm_crtc_init_with_planes(dev, &intel_crtc->base, primary,
14247 cursor, &intel_crtc_funcs, NULL);
14251 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
14252 for (i = 0; i < 256; i++) {
14253 intel_crtc->lut_r[i] = i;
14254 intel_crtc->lut_g[i] = i;
14255 intel_crtc->lut_b[i] = i;
14259 * On gen2/3 only plane A can do fbc, but the panel fitter and lvds port
14260 * is hooked to pipe B. Hence we want plane A feeding pipe B.
14262 intel_crtc->pipe = pipe;
14263 intel_crtc->plane = pipe;
14264 if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
14265 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
14266 intel_crtc->plane = !pipe;
14269 intel_crtc->cursor_base = ~0;
14270 intel_crtc->cursor_cntl = ~0;
14271 intel_crtc->cursor_size = ~0;
14273 intel_crtc->wm.cxsr_allowed = true;
14275 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
14276 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
14277 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
14278 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
14280 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
14282 WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
14287 drm_plane_cleanup(primary);
14289 drm_plane_cleanup(cursor);
14294 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
14296 struct drm_encoder *encoder = connector->base.encoder;
14297 struct drm_device *dev = connector->base.dev;
14299 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
14301 if (!encoder || WARN_ON(!encoder->crtc))
14302 return INVALID_PIPE;
14304 return to_intel_crtc(encoder->crtc)->pipe;
14307 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
14308 struct drm_file *file)
14310 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
14311 struct drm_crtc *drmmode_crtc;
14312 struct intel_crtc *crtc;
14314 drmmode_crtc = drm_crtc_find(dev, pipe_from_crtc_id->crtc_id);
14316 if (!drmmode_crtc) {
14317 DRM_ERROR("no such CRTC id\n");
14321 crtc = to_intel_crtc(drmmode_crtc);
14322 pipe_from_crtc_id->pipe = crtc->pipe;
14327 static int intel_encoder_clones(struct intel_encoder *encoder)
14329 struct drm_device *dev = encoder->base.dev;
14330 struct intel_encoder *source_encoder;
14331 int index_mask = 0;
14334 for_each_intel_encoder(dev, source_encoder) {
14335 if (encoders_cloneable(encoder, source_encoder))
14336 index_mask |= (1 << entry);
14344 static bool has_edp_a(struct drm_device *dev)
14346 struct drm_i915_private *dev_priv = dev->dev_private;
14348 if (!IS_MOBILE(dev))
14351 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
14354 if (IS_GEN5(dev) && (I915_READ(FUSE_STRAP) & ILK_eDP_A_DISABLE))
14360 static bool intel_crt_present(struct drm_device *dev)
14362 struct drm_i915_private *dev_priv = dev->dev_private;
14364 if (INTEL_INFO(dev)->gen >= 9)
14367 if (IS_HSW_ULT(dev) || IS_BDW_ULT(dev))
14370 if (IS_CHERRYVIEW(dev))
14373 if (HAS_PCH_LPT_H(dev) && I915_READ(SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED)
14376 /* DDI E can't be used if DDI A requires 4 lanes */
14377 if (HAS_DDI(dev) && I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
14380 if (!dev_priv->vbt.int_crt_support)
14386 static void intel_setup_outputs(struct drm_device *dev)
14388 struct drm_i915_private *dev_priv = dev->dev_private;
14389 struct intel_encoder *encoder;
14390 bool dpd_is_edp = false;
14392 intel_lvds_init(dev);
14394 if (intel_crt_present(dev))
14395 intel_crt_init(dev);
14397 if (IS_BROXTON(dev)) {
14399 * FIXME: Broxton doesn't support port detection via the
14400 * DDI_BUF_CTL_A or SFUSE_STRAP registers, find another way to
14401 * detect the ports.
14403 intel_ddi_init(dev, PORT_A);
14404 intel_ddi_init(dev, PORT_B);
14405 intel_ddi_init(dev, PORT_C);
14406 } else if (HAS_DDI(dev)) {
14410 * Haswell uses DDI functions to detect digital outputs.
14411 * On SKL pre-D0 the strap isn't connected, so we assume
14414 found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
14415 /* WaIgnoreDDIAStrap: skl */
14416 if (found || IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
14417 intel_ddi_init(dev, PORT_A);
14419 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
14421 found = I915_READ(SFUSE_STRAP);
14423 if (found & SFUSE_STRAP_DDIB_DETECTED)
14424 intel_ddi_init(dev, PORT_B);
14425 if (found & SFUSE_STRAP_DDIC_DETECTED)
14426 intel_ddi_init(dev, PORT_C);
14427 if (found & SFUSE_STRAP_DDID_DETECTED)
14428 intel_ddi_init(dev, PORT_D);
14430 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
14432 if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
14433 (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
14434 dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
14435 dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
14436 intel_ddi_init(dev, PORT_E);
14438 } else if (HAS_PCH_SPLIT(dev)) {
14440 dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
14442 if (has_edp_a(dev))
14443 intel_dp_init(dev, DP_A, PORT_A);
14445 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
14446 /* PCH SDVOB multiplex with HDMIB */
14447 found = intel_sdvo_init(dev, PCH_SDVOB, PORT_B);
14449 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
14450 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
14451 intel_dp_init(dev, PCH_DP_B, PORT_B);
14454 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
14455 intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
14457 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
14458 intel_hdmi_init(dev, PCH_HDMID, PORT_D);
14460 if (I915_READ(PCH_DP_C) & DP_DETECTED)
14461 intel_dp_init(dev, PCH_DP_C, PORT_C);
14463 if (I915_READ(PCH_DP_D) & DP_DETECTED)
14464 intel_dp_init(dev, PCH_DP_D, PORT_D);
14465 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
14467 * The DP_DETECTED bit is the latched state of the DDC
14468 * SDA pin at boot. However since eDP doesn't require DDC
14469 * (no way to plug in a DP->HDMI dongle) the DDC pins for
14470 * eDP ports may have been muxed to an alternate function.
14471 * Thus we can't rely on the DP_DETECTED bit alone to detect
14472 * eDP ports. Consult the VBT as well as DP_DETECTED to
14473 * detect eDP ports.
14475 if (I915_READ(VLV_HDMIB) & SDVO_DETECTED &&
14476 !intel_dp_is_edp(dev, PORT_B))
14477 intel_hdmi_init(dev, VLV_HDMIB, PORT_B);
14478 if (I915_READ(VLV_DP_B) & DP_DETECTED ||
14479 intel_dp_is_edp(dev, PORT_B))
14480 intel_dp_init(dev, VLV_DP_B, PORT_B);
14482 if (I915_READ(VLV_HDMIC) & SDVO_DETECTED &&
14483 !intel_dp_is_edp(dev, PORT_C))
14484 intel_hdmi_init(dev, VLV_HDMIC, PORT_C);
14485 if (I915_READ(VLV_DP_C) & DP_DETECTED ||
14486 intel_dp_is_edp(dev, PORT_C))
14487 intel_dp_init(dev, VLV_DP_C, PORT_C);
14489 if (IS_CHERRYVIEW(dev)) {
14490 /* eDP not supported on port D, so don't check VBT */
14491 if (I915_READ(CHV_HDMID) & SDVO_DETECTED)
14492 intel_hdmi_init(dev, CHV_HDMID, PORT_D);
14493 if (I915_READ(CHV_DP_D) & DP_DETECTED)
14494 intel_dp_init(dev, CHV_DP_D, PORT_D);
14497 intel_dsi_init(dev);
14498 } else if (!IS_GEN2(dev) && !IS_PINEVIEW(dev)) {
14499 bool found = false;
14501 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
14502 DRM_DEBUG_KMS("probing SDVOB\n");
14503 found = intel_sdvo_init(dev, GEN3_SDVOB, PORT_B);
14504 if (!found && IS_G4X(dev)) {
14505 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
14506 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
14509 if (!found && IS_G4X(dev))
14510 intel_dp_init(dev, DP_B, PORT_B);
14513 /* Before G4X SDVOC doesn't have its own detect register */
14515 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
14516 DRM_DEBUG_KMS("probing SDVOC\n");
14517 found = intel_sdvo_init(dev, GEN3_SDVOC, PORT_C);
14520 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
14523 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
14524 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
14527 intel_dp_init(dev, DP_C, PORT_C);
14531 (I915_READ(DP_D) & DP_DETECTED))
14532 intel_dp_init(dev, DP_D, PORT_D);
14533 } else if (IS_GEN2(dev))
14534 intel_dvo_init(dev);
14536 if (SUPPORTS_TV(dev))
14537 intel_tv_init(dev);
14539 intel_psr_init(dev);
14541 for_each_intel_encoder(dev, encoder) {
14542 encoder->base.possible_crtcs = encoder->crtc_mask;
14543 encoder->base.possible_clones =
14544 intel_encoder_clones(encoder);
14547 intel_init_pch_refclk(dev);
14549 drm_helper_move_panel_connectors_to_head(dev);
14552 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
14554 struct drm_device *dev = fb->dev;
14555 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14557 drm_framebuffer_cleanup(fb);
14558 mutex_lock(&dev->struct_mutex);
14559 WARN_ON(!intel_fb->obj->framebuffer_references--);
14560 drm_gem_object_unreference(&intel_fb->obj->base);
14561 mutex_unlock(&dev->struct_mutex);
14565 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
14566 struct drm_file *file,
14567 unsigned int *handle)
14569 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14570 struct drm_i915_gem_object *obj = intel_fb->obj;
14572 if (obj->userptr.mm) {
14573 DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
14577 return drm_gem_handle_create(file, &obj->base, handle);
14580 static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,
14581 struct drm_file *file,
14582 unsigned flags, unsigned color,
14583 struct drm_clip_rect *clips,
14584 unsigned num_clips)
14586 struct drm_device *dev = fb->dev;
14587 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14588 struct drm_i915_gem_object *obj = intel_fb->obj;
14590 mutex_lock(&dev->struct_mutex);
14591 intel_fb_obj_flush(obj, false, ORIGIN_DIRTYFB);
14592 mutex_unlock(&dev->struct_mutex);
14597 static const struct drm_framebuffer_funcs intel_fb_funcs = {
14598 .destroy = intel_user_framebuffer_destroy,
14599 .create_handle = intel_user_framebuffer_create_handle,
14600 .dirty = intel_user_framebuffer_dirty,
14604 u32 intel_fb_pitch_limit(struct drm_device *dev, uint64_t fb_modifier,
14605 uint32_t pixel_format)
14607 u32 gen = INTEL_INFO(dev)->gen;
14610 int cpp = drm_format_plane_cpp(pixel_format, 0);
14612 /* "The stride in bytes must not exceed the of the size of 8K
14613 * pixels and 32K bytes."
14615 return min(8192 * cpp, 32768);
14616 } else if (gen >= 5 && !IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
14618 } else if (gen >= 4) {
14619 if (fb_modifier == I915_FORMAT_MOD_X_TILED)
14623 } else if (gen >= 3) {
14624 if (fb_modifier == I915_FORMAT_MOD_X_TILED)
14629 /* XXX DSPC is limited to 4k tiled */
14634 static int intel_framebuffer_init(struct drm_device *dev,
14635 struct intel_framebuffer *intel_fb,
14636 struct drm_mode_fb_cmd2 *mode_cmd,
14637 struct drm_i915_gem_object *obj)
14639 struct drm_i915_private *dev_priv = to_i915(dev);
14640 unsigned int aligned_height;
14642 u32 pitch_limit, stride_alignment;
14644 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
14646 if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) {
14647 /* Enforce that fb modifier and tiling mode match, but only for
14648 * X-tiled. This is needed for FBC. */
14649 if (!!(obj->tiling_mode == I915_TILING_X) !=
14650 !!(mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED)) {
14651 DRM_DEBUG("tiling_mode doesn't match fb modifier\n");
14655 if (obj->tiling_mode == I915_TILING_X)
14656 mode_cmd->modifier[0] = I915_FORMAT_MOD_X_TILED;
14657 else if (obj->tiling_mode == I915_TILING_Y) {
14658 DRM_DEBUG("No Y tiling for legacy addfb\n");
14663 /* Passed in modifier sanity checking. */
14664 switch (mode_cmd->modifier[0]) {
14665 case I915_FORMAT_MOD_Y_TILED:
14666 case I915_FORMAT_MOD_Yf_TILED:
14667 if (INTEL_INFO(dev)->gen < 9) {
14668 DRM_DEBUG("Unsupported tiling 0x%llx!\n",
14669 mode_cmd->modifier[0]);
14672 case DRM_FORMAT_MOD_NONE:
14673 case I915_FORMAT_MOD_X_TILED:
14676 DRM_DEBUG("Unsupported fb modifier 0x%llx!\n",
14677 mode_cmd->modifier[0]);
14681 stride_alignment = intel_fb_stride_alignment(dev_priv,
14682 mode_cmd->modifier[0],
14683 mode_cmd->pixel_format);
14684 if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
14685 DRM_DEBUG("pitch (%d) must be at least %u byte aligned\n",
14686 mode_cmd->pitches[0], stride_alignment);
14690 pitch_limit = intel_fb_pitch_limit(dev, mode_cmd->modifier[0],
14691 mode_cmd->pixel_format);
14692 if (mode_cmd->pitches[0] > pitch_limit) {
14693 DRM_DEBUG("%s pitch (%u) must be at less than %d\n",
14694 mode_cmd->modifier[0] != DRM_FORMAT_MOD_NONE ?
14695 "tiled" : "linear",
14696 mode_cmd->pitches[0], pitch_limit);
14700 if (mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED &&
14701 mode_cmd->pitches[0] != obj->stride) {
14702 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
14703 mode_cmd->pitches[0], obj->stride);
14707 /* Reject formats not supported by any plane early. */
14708 switch (mode_cmd->pixel_format) {
14709 case DRM_FORMAT_C8:
14710 case DRM_FORMAT_RGB565:
14711 case DRM_FORMAT_XRGB8888:
14712 case DRM_FORMAT_ARGB8888:
14714 case DRM_FORMAT_XRGB1555:
14715 if (INTEL_INFO(dev)->gen > 3) {
14716 DRM_DEBUG("unsupported pixel format: %s\n",
14717 drm_get_format_name(mode_cmd->pixel_format));
14721 case DRM_FORMAT_ABGR8888:
14722 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) &&
14723 INTEL_INFO(dev)->gen < 9) {
14724 DRM_DEBUG("unsupported pixel format: %s\n",
14725 drm_get_format_name(mode_cmd->pixel_format));
14729 case DRM_FORMAT_XBGR8888:
14730 case DRM_FORMAT_XRGB2101010:
14731 case DRM_FORMAT_XBGR2101010:
14732 if (INTEL_INFO(dev)->gen < 4) {
14733 DRM_DEBUG("unsupported pixel format: %s\n",
14734 drm_get_format_name(mode_cmd->pixel_format));
14738 case DRM_FORMAT_ABGR2101010:
14739 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
14740 DRM_DEBUG("unsupported pixel format: %s\n",
14741 drm_get_format_name(mode_cmd->pixel_format));
14745 case DRM_FORMAT_YUYV:
14746 case DRM_FORMAT_UYVY:
14747 case DRM_FORMAT_YVYU:
14748 case DRM_FORMAT_VYUY:
14749 if (INTEL_INFO(dev)->gen < 5) {
14750 DRM_DEBUG("unsupported pixel format: %s\n",
14751 drm_get_format_name(mode_cmd->pixel_format));
14756 DRM_DEBUG("unsupported pixel format: %s\n",
14757 drm_get_format_name(mode_cmd->pixel_format));
14761 /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
14762 if (mode_cmd->offsets[0] != 0)
14765 aligned_height = intel_fb_align_height(dev, mode_cmd->height,
14766 mode_cmd->pixel_format,
14767 mode_cmd->modifier[0]);
14768 /* FIXME drm helper for size checks (especially planar formats)? */
14769 if (obj->base.size < aligned_height * mode_cmd->pitches[0])
14772 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
14773 intel_fb->obj = obj;
14775 intel_fill_fb_info(dev_priv, &intel_fb->base);
14777 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
14779 DRM_ERROR("framebuffer init failed %d\n", ret);
14783 intel_fb->obj->framebuffer_references++;
14788 static struct drm_framebuffer *
14789 intel_user_framebuffer_create(struct drm_device *dev,
14790 struct drm_file *filp,
14791 const struct drm_mode_fb_cmd2 *user_mode_cmd)
14793 struct drm_framebuffer *fb;
14794 struct drm_i915_gem_object *obj;
14795 struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd;
14797 obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
14798 mode_cmd.handles[0]));
14799 if (&obj->base == NULL)
14800 return ERR_PTR(-ENOENT);
14802 fb = intel_framebuffer_create(dev, &mode_cmd, obj);
14804 drm_gem_object_unreference_unlocked(&obj->base);
14809 #ifndef CONFIG_DRM_FBDEV_EMULATION
14810 static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
14815 static const struct drm_mode_config_funcs intel_mode_funcs = {
14816 .fb_create = intel_user_framebuffer_create,
14817 .output_poll_changed = intel_fbdev_output_poll_changed,
14818 .atomic_check = intel_atomic_check,
14819 .atomic_commit = intel_atomic_commit,
14820 .atomic_state_alloc = intel_atomic_state_alloc,
14821 .atomic_state_clear = intel_atomic_state_clear,
14824 /* Set up chip specific display functions */
14825 static void intel_init_display(struct drm_device *dev)
14827 struct drm_i915_private *dev_priv = dev->dev_private;
14829 if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
14830 dev_priv->display.find_dpll = g4x_find_best_dpll;
14831 else if (IS_CHERRYVIEW(dev))
14832 dev_priv->display.find_dpll = chv_find_best_dpll;
14833 else if (IS_VALLEYVIEW(dev))
14834 dev_priv->display.find_dpll = vlv_find_best_dpll;
14835 else if (IS_PINEVIEW(dev))
14836 dev_priv->display.find_dpll = pnv_find_best_dpll;
14838 dev_priv->display.find_dpll = i9xx_find_best_dpll;
14840 if (INTEL_INFO(dev)->gen >= 9) {
14841 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
14842 dev_priv->display.get_initial_plane_config =
14843 skylake_get_initial_plane_config;
14844 dev_priv->display.crtc_compute_clock =
14845 haswell_crtc_compute_clock;
14846 dev_priv->display.crtc_enable = haswell_crtc_enable;
14847 dev_priv->display.crtc_disable = haswell_crtc_disable;
14848 } else if (HAS_DDI(dev)) {
14849 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
14850 dev_priv->display.get_initial_plane_config =
14851 ironlake_get_initial_plane_config;
14852 dev_priv->display.crtc_compute_clock =
14853 haswell_crtc_compute_clock;
14854 dev_priv->display.crtc_enable = haswell_crtc_enable;
14855 dev_priv->display.crtc_disable = haswell_crtc_disable;
14856 } else if (HAS_PCH_SPLIT(dev)) {
14857 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
14858 dev_priv->display.get_initial_plane_config =
14859 ironlake_get_initial_plane_config;
14860 dev_priv->display.crtc_compute_clock =
14861 ironlake_crtc_compute_clock;
14862 dev_priv->display.crtc_enable = ironlake_crtc_enable;
14863 dev_priv->display.crtc_disable = ironlake_crtc_disable;
14864 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
14865 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14866 dev_priv->display.get_initial_plane_config =
14867 i9xx_get_initial_plane_config;
14868 dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
14869 dev_priv->display.crtc_enable = valleyview_crtc_enable;
14870 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14872 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14873 dev_priv->display.get_initial_plane_config =
14874 i9xx_get_initial_plane_config;
14875 dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
14876 dev_priv->display.crtc_enable = i9xx_crtc_enable;
14877 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14880 /* Returns the core display clock speed */
14881 if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
14882 dev_priv->display.get_display_clock_speed =
14883 skylake_get_display_clock_speed;
14884 else if (IS_BROXTON(dev))
14885 dev_priv->display.get_display_clock_speed =
14886 broxton_get_display_clock_speed;
14887 else if (IS_BROADWELL(dev))
14888 dev_priv->display.get_display_clock_speed =
14889 broadwell_get_display_clock_speed;
14890 else if (IS_HASWELL(dev))
14891 dev_priv->display.get_display_clock_speed =
14892 haswell_get_display_clock_speed;
14893 else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
14894 dev_priv->display.get_display_clock_speed =
14895 valleyview_get_display_clock_speed;
14896 else if (IS_GEN5(dev))
14897 dev_priv->display.get_display_clock_speed =
14898 ilk_get_display_clock_speed;
14899 else if (IS_I945G(dev) || IS_BROADWATER(dev) ||
14900 IS_GEN6(dev) || IS_IVYBRIDGE(dev))
14901 dev_priv->display.get_display_clock_speed =
14902 i945_get_display_clock_speed;
14903 else if (IS_GM45(dev))
14904 dev_priv->display.get_display_clock_speed =
14905 gm45_get_display_clock_speed;
14906 else if (IS_CRESTLINE(dev))
14907 dev_priv->display.get_display_clock_speed =
14908 i965gm_get_display_clock_speed;
14909 else if (IS_PINEVIEW(dev))
14910 dev_priv->display.get_display_clock_speed =
14911 pnv_get_display_clock_speed;
14912 else if (IS_G33(dev) || IS_G4X(dev))
14913 dev_priv->display.get_display_clock_speed =
14914 g33_get_display_clock_speed;
14915 else if (IS_I915G(dev))
14916 dev_priv->display.get_display_clock_speed =
14917 i915_get_display_clock_speed;
14918 else if (IS_I945GM(dev) || IS_845G(dev))
14919 dev_priv->display.get_display_clock_speed =
14920 i9xx_misc_get_display_clock_speed;
14921 else if (IS_I915GM(dev))
14922 dev_priv->display.get_display_clock_speed =
14923 i915gm_get_display_clock_speed;
14924 else if (IS_I865G(dev))
14925 dev_priv->display.get_display_clock_speed =
14926 i865_get_display_clock_speed;
14927 else if (IS_I85X(dev))
14928 dev_priv->display.get_display_clock_speed =
14929 i85x_get_display_clock_speed;
14931 WARN(!IS_I830(dev), "Unknown platform. Assuming 133 MHz CDCLK\n");
14932 dev_priv->display.get_display_clock_speed =
14933 i830_get_display_clock_speed;
14936 if (IS_GEN5(dev)) {
14937 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
14938 } else if (IS_GEN6(dev)) {
14939 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
14940 } else if (IS_IVYBRIDGE(dev)) {
14941 /* FIXME: detect B0+ stepping and use auto training */
14942 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
14943 } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
14944 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
14945 if (IS_BROADWELL(dev)) {
14946 dev_priv->display.modeset_commit_cdclk =
14947 broadwell_modeset_commit_cdclk;
14948 dev_priv->display.modeset_calc_cdclk =
14949 broadwell_modeset_calc_cdclk;
14951 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
14952 dev_priv->display.modeset_commit_cdclk =
14953 valleyview_modeset_commit_cdclk;
14954 dev_priv->display.modeset_calc_cdclk =
14955 valleyview_modeset_calc_cdclk;
14956 } else if (IS_BROXTON(dev)) {
14957 dev_priv->display.modeset_commit_cdclk =
14958 broxton_modeset_commit_cdclk;
14959 dev_priv->display.modeset_calc_cdclk =
14960 broxton_modeset_calc_cdclk;
14963 switch (INTEL_INFO(dev)->gen) {
14965 dev_priv->display.queue_flip = intel_gen2_queue_flip;
14969 dev_priv->display.queue_flip = intel_gen3_queue_flip;
14974 dev_priv->display.queue_flip = intel_gen4_queue_flip;
14978 dev_priv->display.queue_flip = intel_gen6_queue_flip;
14981 case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
14982 dev_priv->display.queue_flip = intel_gen7_queue_flip;
14985 /* Drop through - unsupported since execlist only. */
14987 /* Default just returns -ENODEV to indicate unsupported */
14988 dev_priv->display.queue_flip = intel_default_queue_flip;
14991 mutex_init(&dev_priv->pps_mutex);
14995 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
14996 * resume, or other times. This quirk makes sure that's the case for
14997 * affected systems.
14999 static void quirk_pipea_force(struct drm_device *dev)
15001 struct drm_i915_private *dev_priv = dev->dev_private;
15003 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
15004 DRM_INFO("applying pipe a force quirk\n");
15007 static void quirk_pipeb_force(struct drm_device *dev)
15009 struct drm_i915_private *dev_priv = dev->dev_private;
15011 dev_priv->quirks |= QUIRK_PIPEB_FORCE;
15012 DRM_INFO("applying pipe b force quirk\n");
15016 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
15018 static void quirk_ssc_force_disable(struct drm_device *dev)
15020 struct drm_i915_private *dev_priv = dev->dev_private;
15021 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
15022 DRM_INFO("applying lvds SSC disable quirk\n");
15026 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
15029 static void quirk_invert_brightness(struct drm_device *dev)
15031 struct drm_i915_private *dev_priv = dev->dev_private;
15032 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
15033 DRM_INFO("applying inverted panel brightness quirk\n");
15036 /* Some VBT's incorrectly indicate no backlight is present */
15037 static void quirk_backlight_present(struct drm_device *dev)
15039 struct drm_i915_private *dev_priv = dev->dev_private;
15040 dev_priv->quirks |= QUIRK_BACKLIGHT_PRESENT;
15041 DRM_INFO("applying backlight present quirk\n");
15044 struct intel_quirk {
15046 int subsystem_vendor;
15047 int subsystem_device;
15048 void (*hook)(struct drm_device *dev);
15051 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
15052 struct intel_dmi_quirk {
15053 void (*hook)(struct drm_device *dev);
15054 const struct dmi_system_id (*dmi_id_list)[];
15057 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
15059 DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
15063 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
15065 .dmi_id_list = &(const struct dmi_system_id[]) {
15067 .callback = intel_dmi_reverse_brightness,
15068 .ident = "NCR Corporation",
15069 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
15070 DMI_MATCH(DMI_PRODUCT_NAME, ""),
15073 { } /* terminating entry */
15075 .hook = quirk_invert_brightness,
15079 static struct intel_quirk intel_quirks[] = {
15080 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
15081 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
15083 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
15084 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
15086 /* 830 needs to leave pipe A & dpll A up */
15087 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
15089 /* 830 needs to leave pipe B & dpll B up */
15090 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipeb_force },
15092 /* Lenovo U160 cannot use SSC on LVDS */
15093 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
15095 /* Sony Vaio Y cannot use SSC on LVDS */
15096 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
15098 /* Acer Aspire 5734Z must invert backlight brightness */
15099 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
15101 /* Acer/eMachines G725 */
15102 { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
15104 /* Acer/eMachines e725 */
15105 { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
15107 /* Acer/Packard Bell NCL20 */
15108 { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
15110 /* Acer Aspire 4736Z */
15111 { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
15113 /* Acer Aspire 5336 */
15114 { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness },
15116 /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */
15117 { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present },
15119 /* Acer C720 Chromebook (Core i3 4005U) */
15120 { 0x0a16, 0x1025, 0x0a11, quirk_backlight_present },
15122 /* Apple Macbook 2,1 (Core 2 T7400) */
15123 { 0x27a2, 0x8086, 0x7270, quirk_backlight_present },
15125 /* Apple Macbook 4,1 */
15126 { 0x2a02, 0x106b, 0x00a1, quirk_backlight_present },
15128 /* Toshiba CB35 Chromebook (Celeron 2955U) */
15129 { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
15131 /* HP Chromebook 14 (Celeron 2955U) */
15132 { 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
15134 /* Dell Chromebook 11 */
15135 { 0x0a06, 0x1028, 0x0a35, quirk_backlight_present },
15137 /* Dell Chromebook 11 (2015 version) */
15138 { 0x0a16, 0x1028, 0x0a35, quirk_backlight_present },
15141 static void intel_init_quirks(struct drm_device *dev)
15143 struct pci_dev *d = dev->pdev;
15146 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
15147 struct intel_quirk *q = &intel_quirks[i];
15149 if (d->device == q->device &&
15150 (d->subsystem_vendor == q->subsystem_vendor ||
15151 q->subsystem_vendor == PCI_ANY_ID) &&
15152 (d->subsystem_device == q->subsystem_device ||
15153 q->subsystem_device == PCI_ANY_ID))
15156 for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
15157 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
15158 intel_dmi_quirks[i].hook(dev);
15162 /* Disable the VGA plane that we never use */
15163 static void i915_disable_vga(struct drm_device *dev)
15165 struct drm_i915_private *dev_priv = dev->dev_private;
15167 i915_reg_t vga_reg = i915_vgacntrl_reg(dev);
15169 /* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
15170 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
15171 outb(SR01, VGA_SR_INDEX);
15172 sr1 = inb(VGA_SR_DATA);
15173 outb(sr1 | 1<<5, VGA_SR_DATA);
15174 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
15177 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
15178 POSTING_READ(vga_reg);
15181 void intel_modeset_init_hw(struct drm_device *dev)
15183 struct drm_i915_private *dev_priv = dev->dev_private;
15185 intel_update_cdclk(dev);
15187 dev_priv->atomic_cdclk_freq = dev_priv->cdclk_freq;
15189 intel_init_clock_gating(dev);
15190 intel_enable_gt_powersave(dev);
15194 * Calculate what we think the watermarks should be for the state we've read
15195 * out of the hardware and then immediately program those watermarks so that
15196 * we ensure the hardware settings match our internal state.
15198 * We can calculate what we think WM's should be by creating a duplicate of the
15199 * current state (which was constructed during hardware readout) and running it
15200 * through the atomic check code to calculate new watermark values in the
15203 static void sanitize_watermarks(struct drm_device *dev)
15205 struct drm_i915_private *dev_priv = to_i915(dev);
15206 struct drm_atomic_state *state;
15207 struct drm_crtc *crtc;
15208 struct drm_crtc_state *cstate;
15209 struct drm_modeset_acquire_ctx ctx;
15213 /* Only supported on platforms that use atomic watermark design */
15214 if (!dev_priv->display.optimize_watermarks)
15218 * We need to hold connection_mutex before calling duplicate_state so
15219 * that the connector loop is protected.
15221 drm_modeset_acquire_init(&ctx, 0);
15223 ret = drm_modeset_lock_all_ctx(dev, &ctx);
15224 if (ret == -EDEADLK) {
15225 drm_modeset_backoff(&ctx);
15227 } else if (WARN_ON(ret)) {
15231 state = drm_atomic_helper_duplicate_state(dev, &ctx);
15232 if (WARN_ON(IS_ERR(state)))
15236 * Hardware readout is the only time we don't want to calculate
15237 * intermediate watermarks (since we don't trust the current
15240 to_intel_atomic_state(state)->skip_intermediate_wm = true;
15242 ret = intel_atomic_check(dev, state);
15245 * If we fail here, it means that the hardware appears to be
15246 * programmed in a way that shouldn't be possible, given our
15247 * understanding of watermark requirements. This might mean a
15248 * mistake in the hardware readout code or a mistake in the
15249 * watermark calculations for a given platform. Raise a WARN
15250 * so that this is noticeable.
15252 * If this actually happens, we'll have to just leave the
15253 * BIOS-programmed watermarks untouched and hope for the best.
15255 WARN(true, "Could not determine valid watermarks for inherited state\n");
15259 /* Write calculated watermark values back */
15260 to_i915(dev)->wm.config = to_intel_atomic_state(state)->wm_config;
15261 for_each_crtc_in_state(state, crtc, cstate, i) {
15262 struct intel_crtc_state *cs = to_intel_crtc_state(cstate);
15264 cs->wm.need_postvbl_update = true;
15265 dev_priv->display.optimize_watermarks(cs);
15268 drm_atomic_state_free(state);
15270 drm_modeset_drop_locks(&ctx);
15271 drm_modeset_acquire_fini(&ctx);
15274 void intel_modeset_init(struct drm_device *dev)
15276 struct drm_i915_private *dev_priv = dev->dev_private;
15279 struct intel_crtc *crtc;
15281 drm_mode_config_init(dev);
15283 dev->mode_config.min_width = 0;
15284 dev->mode_config.min_height = 0;
15286 dev->mode_config.preferred_depth = 24;
15287 dev->mode_config.prefer_shadow = 1;
15289 dev->mode_config.allow_fb_modifiers = true;
15291 dev->mode_config.funcs = &intel_mode_funcs;
15293 intel_init_quirks(dev);
15295 intel_init_pm(dev);
15297 if (INTEL_INFO(dev)->num_pipes == 0)
15301 * There may be no VBT; and if the BIOS enabled SSC we can
15302 * just keep using it to avoid unnecessary flicker. Whereas if the
15303 * BIOS isn't using it, don't assume it will work even if the VBT
15304 * indicates as much.
15306 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
15307 bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
15310 if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
15311 DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n",
15312 bios_lvds_use_ssc ? "en" : "dis",
15313 dev_priv->vbt.lvds_use_ssc ? "en" : "dis");
15314 dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
15318 intel_init_display(dev);
15319 intel_init_audio(dev);
15321 if (IS_GEN2(dev)) {
15322 dev->mode_config.max_width = 2048;
15323 dev->mode_config.max_height = 2048;
15324 } else if (IS_GEN3(dev)) {
15325 dev->mode_config.max_width = 4096;
15326 dev->mode_config.max_height = 4096;
15328 dev->mode_config.max_width = 8192;
15329 dev->mode_config.max_height = 8192;
15332 if (IS_845G(dev) || IS_I865G(dev)) {
15333 dev->mode_config.cursor_width = IS_845G(dev) ? 64 : 512;
15334 dev->mode_config.cursor_height = 1023;
15335 } else if (IS_GEN2(dev)) {
15336 dev->mode_config.cursor_width = GEN2_CURSOR_WIDTH;
15337 dev->mode_config.cursor_height = GEN2_CURSOR_HEIGHT;
15339 dev->mode_config.cursor_width = MAX_CURSOR_WIDTH;
15340 dev->mode_config.cursor_height = MAX_CURSOR_HEIGHT;
15343 dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
15345 DRM_DEBUG_KMS("%d display pipe%s available.\n",
15346 INTEL_INFO(dev)->num_pipes,
15347 INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
15349 for_each_pipe(dev_priv, pipe) {
15350 intel_crtc_init(dev, pipe);
15351 for_each_sprite(dev_priv, pipe, sprite) {
15352 ret = intel_plane_init(dev, pipe, sprite);
15354 DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
15355 pipe_name(pipe), sprite_name(pipe, sprite), ret);
15359 intel_update_czclk(dev_priv);
15360 intel_update_rawclk(dev_priv);
15361 intel_update_cdclk(dev);
15363 intel_shared_dpll_init(dev);
15365 /* Just disable it once at startup */
15366 i915_disable_vga(dev);
15367 intel_setup_outputs(dev);
15369 drm_modeset_lock_all(dev);
15370 intel_modeset_setup_hw_state(dev);
15371 drm_modeset_unlock_all(dev);
15373 for_each_intel_crtc(dev, crtc) {
15374 struct intel_initial_plane_config plane_config = {};
15380 * Note that reserving the BIOS fb up front prevents us
15381 * from stuffing other stolen allocations like the ring
15382 * on top. This prevents some ugliness at boot time, and
15383 * can even allow for smooth boot transitions if the BIOS
15384 * fb is large enough for the active pipe configuration.
15386 dev_priv->display.get_initial_plane_config(crtc,
15390 * If the fb is shared between multiple heads, we'll
15391 * just get the first one.
15393 intel_find_initial_plane_obj(crtc, &plane_config);
15397 * Make sure hardware watermarks really match the state we read out.
15398 * Note that we need to do this after reconstructing the BIOS fb's
15399 * since the watermark calculation done here will use pstate->fb.
15401 sanitize_watermarks(dev);
15404 static void intel_enable_pipe_a(struct drm_device *dev)
15406 struct intel_connector *connector;
15407 struct drm_connector *crt = NULL;
15408 struct intel_load_detect_pipe load_detect_temp;
15409 struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
15411 /* We can't just switch on the pipe A, we need to set things up with a
15412 * proper mode and output configuration. As a gross hack, enable pipe A
15413 * by enabling the load detect pipe once. */
15414 for_each_intel_connector(dev, connector) {
15415 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
15416 crt = &connector->base;
15424 if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, ctx))
15425 intel_release_load_detect_pipe(crt, &load_detect_temp, ctx);
15429 intel_check_plane_mapping(struct intel_crtc *crtc)
15431 struct drm_device *dev = crtc->base.dev;
15432 struct drm_i915_private *dev_priv = dev->dev_private;
15435 if (INTEL_INFO(dev)->num_pipes == 1)
15438 val = I915_READ(DSPCNTR(!crtc->plane));
15440 if ((val & DISPLAY_PLANE_ENABLE) &&
15441 (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
15447 static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
15449 struct drm_device *dev = crtc->base.dev;
15450 struct intel_encoder *encoder;
15452 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
15458 static bool intel_encoder_has_connectors(struct intel_encoder *encoder)
15460 struct drm_device *dev = encoder->base.dev;
15461 struct intel_connector *connector;
15463 for_each_connector_on_encoder(dev, &encoder->base, connector)
15469 static void intel_sanitize_crtc(struct intel_crtc *crtc)
15471 struct drm_device *dev = crtc->base.dev;
15472 struct drm_i915_private *dev_priv = dev->dev_private;
15473 i915_reg_t reg = PIPECONF(crtc->config->cpu_transcoder);
15475 /* Clear any frame start delays used for debugging left by the BIOS */
15476 I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
15478 /* restore vblank interrupts to correct state */
15479 drm_crtc_vblank_reset(&crtc->base);
15480 if (crtc->active) {
15481 struct intel_plane *plane;
15483 drm_crtc_vblank_on(&crtc->base);
15485 /* Disable everything but the primary plane */
15486 for_each_intel_plane_on_crtc(dev, crtc, plane) {
15487 if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
15490 plane->disable_plane(&plane->base, &crtc->base);
15494 /* We need to sanitize the plane -> pipe mapping first because this will
15495 * disable the crtc (and hence change the state) if it is wrong. Note
15496 * that gen4+ has a fixed plane -> pipe mapping. */
15497 if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
15500 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
15501 crtc->base.base.id);
15503 /* Pipe has the wrong plane attached and the plane is active.
15504 * Temporarily change the plane mapping and disable everything
15506 plane = crtc->plane;
15507 to_intel_plane_state(crtc->base.primary->state)->visible = true;
15508 crtc->plane = !plane;
15509 intel_crtc_disable_noatomic(&crtc->base);
15510 crtc->plane = plane;
15513 if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
15514 crtc->pipe == PIPE_A && !crtc->active) {
15515 /* BIOS forgot to enable pipe A, this mostly happens after
15516 * resume. Force-enable the pipe to fix this, the update_dpms
15517 * call below we restore the pipe to the right state, but leave
15518 * the required bits on. */
15519 intel_enable_pipe_a(dev);
15522 /* Adjust the state of the output pipe according to whether we
15523 * have active connectors/encoders. */
15524 if (crtc->active && !intel_crtc_has_encoders(crtc))
15525 intel_crtc_disable_noatomic(&crtc->base);
15527 if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
15529 * We start out with underrun reporting disabled to avoid races.
15530 * For correct bookkeeping mark this on active crtcs.
15532 * Also on gmch platforms we dont have any hardware bits to
15533 * disable the underrun reporting. Which means we need to start
15534 * out with underrun reporting disabled also on inactive pipes,
15535 * since otherwise we'll complain about the garbage we read when
15536 * e.g. coming up after runtime pm.
15538 * No protection against concurrent access is required - at
15539 * worst a fifo underrun happens which also sets this to false.
15541 crtc->cpu_fifo_underrun_disabled = true;
15542 crtc->pch_fifo_underrun_disabled = true;
15546 static void intel_sanitize_encoder(struct intel_encoder *encoder)
15548 struct intel_connector *connector;
15549 struct drm_device *dev = encoder->base.dev;
15551 /* We need to check both for a crtc link (meaning that the
15552 * encoder is active and trying to read from a pipe) and the
15553 * pipe itself being active. */
15554 bool has_active_crtc = encoder->base.crtc &&
15555 to_intel_crtc(encoder->base.crtc)->active;
15557 if (intel_encoder_has_connectors(encoder) && !has_active_crtc) {
15558 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
15559 encoder->base.base.id,
15560 encoder->base.name);
15562 /* Connector is active, but has no active pipe. This is
15563 * fallout from our resume register restoring. Disable
15564 * the encoder manually again. */
15565 if (encoder->base.crtc) {
15566 DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
15567 encoder->base.base.id,
15568 encoder->base.name);
15569 encoder->disable(encoder);
15570 if (encoder->post_disable)
15571 encoder->post_disable(encoder);
15573 encoder->base.crtc = NULL;
15575 /* Inconsistent output/port/pipe state happens presumably due to
15576 * a bug in one of the get_hw_state functions. Or someplace else
15577 * in our code, like the register restore mess on resume. Clamp
15578 * things to off as a safer default. */
15579 for_each_intel_connector(dev, connector) {
15580 if (connector->encoder != encoder)
15582 connector->base.dpms = DRM_MODE_DPMS_OFF;
15583 connector->base.encoder = NULL;
15586 /* Enabled encoders without active connectors will be fixed in
15587 * the crtc fixup. */
15590 void i915_redisable_vga_power_on(struct drm_device *dev)
15592 struct drm_i915_private *dev_priv = dev->dev_private;
15593 i915_reg_t vga_reg = i915_vgacntrl_reg(dev);
15595 if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) {
15596 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
15597 i915_disable_vga(dev);
15601 void i915_redisable_vga(struct drm_device *dev)
15603 struct drm_i915_private *dev_priv = dev->dev_private;
15605 /* This function can be called both from intel_modeset_setup_hw_state or
15606 * at a very early point in our resume sequence, where the power well
15607 * structures are not yet restored. Since this function is at a very
15608 * paranoid "someone might have enabled VGA while we were not looking"
15609 * level, just check if the power well is enabled instead of trying to
15610 * follow the "don't touch the power well if we don't need it" policy
15611 * the rest of the driver uses. */
15612 if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_VGA))
15615 i915_redisable_vga_power_on(dev);
15617 intel_display_power_put(dev_priv, POWER_DOMAIN_VGA);
15620 static bool primary_get_hw_state(struct intel_plane *plane)
15622 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
15624 return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
15627 /* FIXME read out full plane state for all planes */
15628 static void readout_plane_state(struct intel_crtc *crtc)
15630 struct drm_plane *primary = crtc->base.primary;
15631 struct intel_plane_state *plane_state =
15632 to_intel_plane_state(primary->state);
15634 plane_state->visible = crtc->active &&
15635 primary_get_hw_state(to_intel_plane(primary));
15637 if (plane_state->visible)
15638 crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
15641 static void intel_modeset_readout_hw_state(struct drm_device *dev)
15643 struct drm_i915_private *dev_priv = dev->dev_private;
15645 struct intel_crtc *crtc;
15646 struct intel_encoder *encoder;
15647 struct intel_connector *connector;
15650 dev_priv->active_crtcs = 0;
15652 for_each_intel_crtc(dev, crtc) {
15653 struct intel_crtc_state *crtc_state = crtc->config;
15656 __drm_atomic_helper_crtc_destroy_state(&crtc->base, &crtc_state->base);
15657 memset(crtc_state, 0, sizeof(*crtc_state));
15658 crtc_state->base.crtc = &crtc->base;
15660 crtc_state->base.active = crtc_state->base.enable =
15661 dev_priv->display.get_pipe_config(crtc, crtc_state);
15663 crtc->base.enabled = crtc_state->base.enable;
15664 crtc->active = crtc_state->base.active;
15666 if (crtc_state->base.active) {
15667 dev_priv->active_crtcs |= 1 << crtc->pipe;
15669 if (IS_BROADWELL(dev_priv)) {
15670 pixclk = ilk_pipe_pixel_rate(crtc_state);
15672 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
15673 if (crtc_state->ips_enabled)
15674 pixclk = DIV_ROUND_UP(pixclk * 100, 95);
15675 } else if (IS_VALLEYVIEW(dev_priv) ||
15676 IS_CHERRYVIEW(dev_priv) ||
15677 IS_BROXTON(dev_priv))
15678 pixclk = crtc_state->base.adjusted_mode.crtc_clock;
15680 WARN_ON(dev_priv->display.modeset_calc_cdclk);
15683 dev_priv->min_pixclk[crtc->pipe] = pixclk;
15685 readout_plane_state(crtc);
15687 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
15688 crtc->base.base.id,
15689 crtc->active ? "enabled" : "disabled");
15692 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
15693 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
15695 pll->on = pll->funcs.get_hw_state(dev_priv, pll,
15696 &pll->config.hw_state);
15698 pll->config.crtc_mask = 0;
15699 for_each_intel_crtc(dev, crtc) {
15700 if (crtc->active && crtc->config->shared_dpll == pll) {
15702 pll->config.crtc_mask |= 1 << crtc->pipe;
15706 DRM_DEBUG_KMS("%s hw state readout: crtc_mask 0x%08x, on %i\n",
15707 pll->name, pll->config.crtc_mask, pll->on);
15709 if (pll->config.crtc_mask)
15710 intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
15713 for_each_intel_encoder(dev, encoder) {
15716 if (encoder->get_hw_state(encoder, &pipe)) {
15717 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
15718 encoder->base.crtc = &crtc->base;
15719 encoder->get_config(encoder, crtc->config);
15721 encoder->base.crtc = NULL;
15724 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
15725 encoder->base.base.id,
15726 encoder->base.name,
15727 encoder->base.crtc ? "enabled" : "disabled",
15731 for_each_intel_connector(dev, connector) {
15732 if (connector->get_hw_state(connector)) {
15733 connector->base.dpms = DRM_MODE_DPMS_ON;
15735 encoder = connector->encoder;
15736 connector->base.encoder = &encoder->base;
15738 if (encoder->base.crtc &&
15739 encoder->base.crtc->state->active) {
15741 * This has to be done during hardware readout
15742 * because anything calling .crtc_disable may
15743 * rely on the connector_mask being accurate.
15745 encoder->base.crtc->state->connector_mask |=
15746 1 << drm_connector_index(&connector->base);
15747 encoder->base.crtc->state->encoder_mask |=
15748 1 << drm_encoder_index(&encoder->base);
15752 connector->base.dpms = DRM_MODE_DPMS_OFF;
15753 connector->base.encoder = NULL;
15755 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
15756 connector->base.base.id,
15757 connector->base.name,
15758 connector->base.encoder ? "enabled" : "disabled");
15761 for_each_intel_crtc(dev, crtc) {
15762 crtc->base.hwmode = crtc->config->base.adjusted_mode;
15764 memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
15765 if (crtc->base.state->active) {
15766 intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
15767 intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
15768 WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
15771 * The initial mode needs to be set in order to keep
15772 * the atomic core happy. It wants a valid mode if the
15773 * crtc's enabled, so we do the above call.
15775 * At this point some state updated by the connectors
15776 * in their ->detect() callback has not run yet, so
15777 * no recalculation can be done yet.
15779 * Even if we could do a recalculation and modeset
15780 * right now it would cause a double modeset if
15781 * fbdev or userspace chooses a different initial mode.
15783 * If that happens, someone indicated they wanted a
15784 * mode change, which means it's safe to do a full
15787 crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
15789 drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
15790 update_scanline_offset(crtc);
15793 intel_pipe_config_sanity_check(dev_priv, crtc->config);
15797 /* Scan out the current hw modeset state,
15798 * and sanitizes it to the current state
15801 intel_modeset_setup_hw_state(struct drm_device *dev)
15803 struct drm_i915_private *dev_priv = dev->dev_private;
15805 struct intel_crtc *crtc;
15806 struct intel_encoder *encoder;
15809 intel_modeset_readout_hw_state(dev);
15811 /* HW state is read out, now we need to sanitize this mess. */
15812 for_each_intel_encoder(dev, encoder) {
15813 intel_sanitize_encoder(encoder);
15816 for_each_pipe(dev_priv, pipe) {
15817 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
15818 intel_sanitize_crtc(crtc);
15819 intel_dump_pipe_config(crtc, crtc->config,
15820 "[setup_hw_state]");
15823 intel_modeset_update_connector_atomic_state(dev);
15825 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
15826 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
15828 if (!pll->on || pll->active)
15831 DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
15833 pll->funcs.disable(dev_priv, pll);
15837 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
15838 vlv_wm_get_hw_state(dev);
15839 else if (IS_GEN9(dev))
15840 skl_wm_get_hw_state(dev);
15841 else if (HAS_PCH_SPLIT(dev))
15842 ilk_wm_get_hw_state(dev);
15844 for_each_intel_crtc(dev, crtc) {
15845 unsigned long put_domains;
15847 put_domains = modeset_get_crtc_power_domains(&crtc->base, crtc->config);
15848 if (WARN_ON(put_domains))
15849 modeset_put_power_domains(dev_priv, put_domains);
15851 intel_display_set_init_power(dev_priv, false);
15853 intel_fbc_init_pipe_state(dev_priv);
15856 void intel_display_resume(struct drm_device *dev)
15858 struct drm_i915_private *dev_priv = to_i915(dev);
15859 struct drm_atomic_state *state = dev_priv->modeset_restore_state;
15860 struct drm_modeset_acquire_ctx ctx;
15862 bool setup = false;
15864 dev_priv->modeset_restore_state = NULL;
15867 * This is a cludge because with real atomic modeset mode_config.mutex
15868 * won't be taken. Unfortunately some probed state like
15869 * audio_codec_enable is still protected by mode_config.mutex, so lock
15872 mutex_lock(&dev->mode_config.mutex);
15873 drm_modeset_acquire_init(&ctx, 0);
15876 ret = drm_modeset_lock_all_ctx(dev, &ctx);
15878 if (ret == 0 && !setup) {
15881 intel_modeset_setup_hw_state(dev);
15882 i915_redisable_vga(dev);
15885 if (ret == 0 && state) {
15886 struct drm_crtc_state *crtc_state;
15887 struct drm_crtc *crtc;
15890 state->acquire_ctx = &ctx;
15892 for_each_crtc_in_state(state, crtc, crtc_state, i) {
15894 * Force recalculation even if we restore
15895 * current state. With fast modeset this may not result
15896 * in a modeset when the state is compatible.
15898 crtc_state->mode_changed = true;
15901 ret = drm_atomic_commit(state);
15904 if (ret == -EDEADLK) {
15905 drm_modeset_backoff(&ctx);
15909 drm_modeset_drop_locks(&ctx);
15910 drm_modeset_acquire_fini(&ctx);
15911 mutex_unlock(&dev->mode_config.mutex);
15914 DRM_ERROR("Restoring old state failed with %i\n", ret);
15915 drm_atomic_state_free(state);
15919 void intel_modeset_gem_init(struct drm_device *dev)
15921 struct drm_crtc *c;
15922 struct drm_i915_gem_object *obj;
15925 intel_init_gt_powersave(dev);
15927 intel_modeset_init_hw(dev);
15929 intel_setup_overlay(dev);
15932 * Make sure any fbs we allocated at startup are properly
15933 * pinned & fenced. When we do the allocation it's too early
15936 for_each_crtc(dev, c) {
15937 obj = intel_fb_obj(c->primary->fb);
15941 mutex_lock(&dev->struct_mutex);
15942 ret = intel_pin_and_fence_fb_obj(c->primary->fb,
15943 c->primary->state->rotation);
15944 mutex_unlock(&dev->struct_mutex);
15946 DRM_ERROR("failed to pin boot fb on pipe %d\n",
15947 to_intel_crtc(c)->pipe);
15948 drm_framebuffer_unreference(c->primary->fb);
15949 c->primary->fb = NULL;
15950 c->primary->crtc = c->primary->state->crtc = NULL;
15951 update_state_fb(c->primary);
15952 c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
15956 intel_backlight_register(dev);
15959 void intel_connector_unregister(struct intel_connector *intel_connector)
15961 struct drm_connector *connector = &intel_connector->base;
15963 intel_panel_destroy_backlight(connector);
15964 drm_connector_unregister(connector);
15967 void intel_modeset_cleanup(struct drm_device *dev)
15969 struct drm_i915_private *dev_priv = dev->dev_private;
15970 struct intel_connector *connector;
15972 intel_disable_gt_powersave(dev);
15974 intel_backlight_unregister(dev);
15977 * Interrupts and polling as the first thing to avoid creating havoc.
15978 * Too much stuff here (turning of connectors, ...) would
15979 * experience fancy races otherwise.
15981 intel_irq_uninstall(dev_priv);
15984 * Due to the hpd irq storm handling the hotplug work can re-arm the
15985 * poll handlers. Hence disable polling after hpd handling is shut down.
15987 drm_kms_helper_poll_fini(dev);
15989 intel_unregister_dsm_handler();
15991 intel_fbc_global_disable(dev_priv);
15993 /* flush any delayed tasks or pending work */
15994 flush_scheduled_work();
15996 /* destroy the backlight and sysfs files before encoders/connectors */
15997 for_each_intel_connector(dev, connector)
15998 connector->unregister(connector);
16000 drm_mode_config_cleanup(dev);
16002 intel_cleanup_overlay(dev);
16004 intel_cleanup_gt_powersave(dev);
16006 intel_teardown_gmbus(dev);
16010 * Return which encoder is currently attached for connector.
16012 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
16014 return &intel_attached_encoder(connector)->base;
16017 void intel_connector_attach_encoder(struct intel_connector *connector,
16018 struct intel_encoder *encoder)
16020 connector->encoder = encoder;
16021 drm_mode_connector_attach_encoder(&connector->base,
16026 * set vga decode state - true == enable VGA decode
16028 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
16030 struct drm_i915_private *dev_priv = dev->dev_private;
16031 unsigned reg = INTEL_INFO(dev)->gen >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL;
16034 if (pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl)) {
16035 DRM_ERROR("failed to read control word\n");
16039 if (!!(gmch_ctrl & INTEL_GMCH_VGA_DISABLE) == !state)
16043 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
16045 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
16047 if (pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl)) {
16048 DRM_ERROR("failed to write control word\n");
16055 struct intel_display_error_state {
16057 u32 power_well_driver;
16059 int num_transcoders;
16061 struct intel_cursor_error_state {
16066 } cursor[I915_MAX_PIPES];
16068 struct intel_pipe_error_state {
16069 bool power_domain_on;
16072 } pipe[I915_MAX_PIPES];
16074 struct intel_plane_error_state {
16082 } plane[I915_MAX_PIPES];
16084 struct intel_transcoder_error_state {
16085 bool power_domain_on;
16086 enum transcoder cpu_transcoder;
16099 struct intel_display_error_state *
16100 intel_display_capture_error_state(struct drm_device *dev)
16102 struct drm_i915_private *dev_priv = dev->dev_private;
16103 struct intel_display_error_state *error;
16104 int transcoders[] = {
16112 if (INTEL_INFO(dev)->num_pipes == 0)
16115 error = kzalloc(sizeof(*error), GFP_ATOMIC);
16119 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
16120 error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
16122 for_each_pipe(dev_priv, i) {
16123 error->pipe[i].power_domain_on =
16124 __intel_display_power_is_enabled(dev_priv,
16125 POWER_DOMAIN_PIPE(i));
16126 if (!error->pipe[i].power_domain_on)
16129 error->cursor[i].control = I915_READ(CURCNTR(i));
16130 error->cursor[i].position = I915_READ(CURPOS(i));
16131 error->cursor[i].base = I915_READ(CURBASE(i));
16133 error->plane[i].control = I915_READ(DSPCNTR(i));
16134 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
16135 if (INTEL_INFO(dev)->gen <= 3) {
16136 error->plane[i].size = I915_READ(DSPSIZE(i));
16137 error->plane[i].pos = I915_READ(DSPPOS(i));
16139 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
16140 error->plane[i].addr = I915_READ(DSPADDR(i));
16141 if (INTEL_INFO(dev)->gen >= 4) {
16142 error->plane[i].surface = I915_READ(DSPSURF(i));
16143 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
16146 error->pipe[i].source = I915_READ(PIPESRC(i));
16148 if (HAS_GMCH_DISPLAY(dev))
16149 error->pipe[i].stat = I915_READ(PIPESTAT(i));
16152 error->num_transcoders = INTEL_INFO(dev)->num_pipes;
16153 if (HAS_DDI(dev_priv->dev))
16154 error->num_transcoders++; /* Account for eDP. */
16156 for (i = 0; i < error->num_transcoders; i++) {
16157 enum transcoder cpu_transcoder = transcoders[i];
16159 error->transcoder[i].power_domain_on =
16160 __intel_display_power_is_enabled(dev_priv,
16161 POWER_DOMAIN_TRANSCODER(cpu_transcoder));
16162 if (!error->transcoder[i].power_domain_on)
16165 error->transcoder[i].cpu_transcoder = cpu_transcoder;
16167 error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
16168 error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
16169 error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
16170 error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
16171 error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
16172 error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
16173 error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
16179 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
16182 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
16183 struct drm_device *dev,
16184 struct intel_display_error_state *error)
16186 struct drm_i915_private *dev_priv = dev->dev_private;
16192 err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
16193 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
16194 err_printf(m, "PWR_WELL_CTL2: %08x\n",
16195 error->power_well_driver);
16196 for_each_pipe(dev_priv, i) {
16197 err_printf(m, "Pipe [%d]:\n", i);
16198 err_printf(m, " Power: %s\n",
16199 onoff(error->pipe[i].power_domain_on));
16200 err_printf(m, " SRC: %08x\n", error->pipe[i].source);
16201 err_printf(m, " STAT: %08x\n", error->pipe[i].stat);
16203 err_printf(m, "Plane [%d]:\n", i);
16204 err_printf(m, " CNTR: %08x\n", error->plane[i].control);
16205 err_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
16206 if (INTEL_INFO(dev)->gen <= 3) {
16207 err_printf(m, " SIZE: %08x\n", error->plane[i].size);
16208 err_printf(m, " POS: %08x\n", error->plane[i].pos);
16210 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
16211 err_printf(m, " ADDR: %08x\n", error->plane[i].addr);
16212 if (INTEL_INFO(dev)->gen >= 4) {
16213 err_printf(m, " SURF: %08x\n", error->plane[i].surface);
16214 err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
16217 err_printf(m, "Cursor [%d]:\n", i);
16218 err_printf(m, " CNTR: %08x\n", error->cursor[i].control);
16219 err_printf(m, " POS: %08x\n", error->cursor[i].position);
16220 err_printf(m, " BASE: %08x\n", error->cursor[i].base);
16223 for (i = 0; i < error->num_transcoders; i++) {
16224 err_printf(m, "CPU transcoder: %c\n",
16225 transcoder_name(error->transcoder[i].cpu_transcoder));
16226 err_printf(m, " Power: %s\n",
16227 onoff(error->transcoder[i].power_domain_on));
16228 err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
16229 err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
16230 err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
16231 err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
16232 err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
16233 err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
16234 err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);