2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/dmi.h>
28 #include <linux/module.h>
29 #include <linux/input.h>
30 #include <linux/i2c.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/vgaarb.h>
34 #include <drm/drm_edid.h>
36 #include "intel_drv.h"
37 #include <drm/i915_drm.h>
39 #include "intel_dsi.h"
40 #include "i915_trace.h"
41 #include <drm/drm_atomic.h>
42 #include <drm/drm_atomic_helper.h>
43 #include <drm/drm_dp_helper.h>
44 #include <drm/drm_crtc_helper.h>
45 #include <drm/drm_plane_helper.h>
46 #include <drm/drm_rect.h>
47 #include <linux/dma_remapping.h>
48 #include <linux/reservation.h>
49 #include <linux/dma-buf.h>
51 static bool is_mmio_work(struct intel_flip_work *work)
53 return work->mmio_work.func;
56 /* Primary plane formats for gen <= 3 */
57 static const uint32_t i8xx_primary_formats[] = {
64 /* Primary plane formats for gen >= 4 */
65 static const uint32_t i965_primary_formats[] = {
70 DRM_FORMAT_XRGB2101010,
71 DRM_FORMAT_XBGR2101010,
74 static const uint32_t skl_primary_formats[] = {
81 DRM_FORMAT_XRGB2101010,
82 DRM_FORMAT_XBGR2101010,
90 static const uint32_t intel_cursor_formats[] = {
94 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
95 struct intel_crtc_state *pipe_config);
96 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
97 struct intel_crtc_state *pipe_config);
99 static int intel_framebuffer_init(struct drm_device *dev,
100 struct intel_framebuffer *ifb,
101 struct drm_mode_fb_cmd2 *mode_cmd,
102 struct drm_i915_gem_object *obj);
103 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc);
104 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc);
105 static void intel_set_pipe_src_size(struct intel_crtc *intel_crtc);
106 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
107 struct intel_link_m_n *m_n,
108 struct intel_link_m_n *m2_n2);
109 static void ironlake_set_pipeconf(struct drm_crtc *crtc);
110 static void haswell_set_pipeconf(struct drm_crtc *crtc);
111 static void haswell_set_pipemisc(struct drm_crtc *crtc);
112 static void vlv_prepare_pll(struct intel_crtc *crtc,
113 const struct intel_crtc_state *pipe_config);
114 static void chv_prepare_pll(struct intel_crtc *crtc,
115 const struct intel_crtc_state *pipe_config);
116 static void intel_begin_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
117 static void intel_finish_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
118 static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
119 struct intel_crtc_state *crtc_state);
120 static void skylake_pfit_enable(struct intel_crtc *crtc);
121 static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
122 static void ironlake_pfit_enable(struct intel_crtc *crtc);
123 static void intel_modeset_setup_hw_state(struct drm_device *dev);
124 static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc);
125 static int ilk_max_pixel_rate(struct drm_atomic_state *state);
126 static int bxt_calc_cdclk(int max_pixclk);
131 } dot, vco, n, m, m1, m2, p, p1;
135 int p2_slow, p2_fast;
139 /* returns HPLL frequency in kHz */
140 static int valleyview_get_vco(struct drm_i915_private *dev_priv)
142 int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
144 /* Obtain SKU information */
145 mutex_lock(&dev_priv->sb_lock);
146 hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
147 CCK_FUSE_HPLL_FREQ_MASK;
148 mutex_unlock(&dev_priv->sb_lock);
150 return vco_freq[hpll_freq] * 1000;
153 int vlv_get_cck_clock(struct drm_i915_private *dev_priv,
154 const char *name, u32 reg, int ref_freq)
159 mutex_lock(&dev_priv->sb_lock);
160 val = vlv_cck_read(dev_priv, reg);
161 mutex_unlock(&dev_priv->sb_lock);
163 divider = val & CCK_FREQUENCY_VALUES;
165 WARN((val & CCK_FREQUENCY_STATUS) !=
166 (divider << CCK_FREQUENCY_STATUS_SHIFT),
167 "%s change in progress\n", name);
169 return DIV_ROUND_CLOSEST(ref_freq << 1, divider + 1);
172 static int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
173 const char *name, u32 reg)
175 if (dev_priv->hpll_freq == 0)
176 dev_priv->hpll_freq = valleyview_get_vco(dev_priv);
178 return vlv_get_cck_clock(dev_priv, name, reg,
179 dev_priv->hpll_freq);
183 intel_pch_rawclk(struct drm_i915_private *dev_priv)
185 return (I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000;
189 intel_vlv_hrawclk(struct drm_i915_private *dev_priv)
191 /* RAWCLK_FREQ_VLV register updated from power well code */
192 return vlv_get_cck_clock_hpll(dev_priv, "hrawclk",
193 CCK_DISPLAY_REF_CLOCK_CONTROL);
197 intel_g4x_hrawclk(struct drm_i915_private *dev_priv)
201 /* hrawclock is 1/4 the FSB frequency */
202 clkcfg = I915_READ(CLKCFG);
203 switch (clkcfg & CLKCFG_FSB_MASK) {
212 case CLKCFG_FSB_1067:
214 case CLKCFG_FSB_1333:
216 /* these two are just a guess; one of them might be right */
217 case CLKCFG_FSB_1600:
218 case CLKCFG_FSB_1600_ALT:
225 void intel_update_rawclk(struct drm_i915_private *dev_priv)
227 if (HAS_PCH_SPLIT(dev_priv))
228 dev_priv->rawclk_freq = intel_pch_rawclk(dev_priv);
229 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
230 dev_priv->rawclk_freq = intel_vlv_hrawclk(dev_priv);
231 else if (IS_G4X(dev_priv) || IS_PINEVIEW(dev_priv))
232 dev_priv->rawclk_freq = intel_g4x_hrawclk(dev_priv);
234 return; /* no rawclk on other platforms, or no need to know it */
236 DRM_DEBUG_DRIVER("rawclk rate: %d kHz\n", dev_priv->rawclk_freq);
239 static void intel_update_czclk(struct drm_i915_private *dev_priv)
241 if (!(IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)))
244 dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
245 CCK_CZ_CLOCK_CONTROL);
247 DRM_DEBUG_DRIVER("CZ clock rate: %d kHz\n", dev_priv->czclk_freq);
250 static inline u32 /* units of 100MHz */
251 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
252 const struct intel_crtc_state *pipe_config)
254 if (HAS_DDI(dev_priv))
255 return pipe_config->port_clock; /* SPLL */
256 else if (IS_GEN5(dev_priv))
257 return ((I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2) * 10000;
262 static const struct intel_limit intel_limits_i8xx_dac = {
263 .dot = { .min = 25000, .max = 350000 },
264 .vco = { .min = 908000, .max = 1512000 },
265 .n = { .min = 2, .max = 16 },
266 .m = { .min = 96, .max = 140 },
267 .m1 = { .min = 18, .max = 26 },
268 .m2 = { .min = 6, .max = 16 },
269 .p = { .min = 4, .max = 128 },
270 .p1 = { .min = 2, .max = 33 },
271 .p2 = { .dot_limit = 165000,
272 .p2_slow = 4, .p2_fast = 2 },
275 static const struct intel_limit intel_limits_i8xx_dvo = {
276 .dot = { .min = 25000, .max = 350000 },
277 .vco = { .min = 908000, .max = 1512000 },
278 .n = { .min = 2, .max = 16 },
279 .m = { .min = 96, .max = 140 },
280 .m1 = { .min = 18, .max = 26 },
281 .m2 = { .min = 6, .max = 16 },
282 .p = { .min = 4, .max = 128 },
283 .p1 = { .min = 2, .max = 33 },
284 .p2 = { .dot_limit = 165000,
285 .p2_slow = 4, .p2_fast = 4 },
288 static const struct intel_limit intel_limits_i8xx_lvds = {
289 .dot = { .min = 25000, .max = 350000 },
290 .vco = { .min = 908000, .max = 1512000 },
291 .n = { .min = 2, .max = 16 },
292 .m = { .min = 96, .max = 140 },
293 .m1 = { .min = 18, .max = 26 },
294 .m2 = { .min = 6, .max = 16 },
295 .p = { .min = 4, .max = 128 },
296 .p1 = { .min = 1, .max = 6 },
297 .p2 = { .dot_limit = 165000,
298 .p2_slow = 14, .p2_fast = 7 },
301 static const struct intel_limit intel_limits_i9xx_sdvo = {
302 .dot = { .min = 20000, .max = 400000 },
303 .vco = { .min = 1400000, .max = 2800000 },
304 .n = { .min = 1, .max = 6 },
305 .m = { .min = 70, .max = 120 },
306 .m1 = { .min = 8, .max = 18 },
307 .m2 = { .min = 3, .max = 7 },
308 .p = { .min = 5, .max = 80 },
309 .p1 = { .min = 1, .max = 8 },
310 .p2 = { .dot_limit = 200000,
311 .p2_slow = 10, .p2_fast = 5 },
314 static const struct intel_limit intel_limits_i9xx_lvds = {
315 .dot = { .min = 20000, .max = 400000 },
316 .vco = { .min = 1400000, .max = 2800000 },
317 .n = { .min = 1, .max = 6 },
318 .m = { .min = 70, .max = 120 },
319 .m1 = { .min = 8, .max = 18 },
320 .m2 = { .min = 3, .max = 7 },
321 .p = { .min = 7, .max = 98 },
322 .p1 = { .min = 1, .max = 8 },
323 .p2 = { .dot_limit = 112000,
324 .p2_slow = 14, .p2_fast = 7 },
328 static const struct intel_limit intel_limits_g4x_sdvo = {
329 .dot = { .min = 25000, .max = 270000 },
330 .vco = { .min = 1750000, .max = 3500000},
331 .n = { .min = 1, .max = 4 },
332 .m = { .min = 104, .max = 138 },
333 .m1 = { .min = 17, .max = 23 },
334 .m2 = { .min = 5, .max = 11 },
335 .p = { .min = 10, .max = 30 },
336 .p1 = { .min = 1, .max = 3},
337 .p2 = { .dot_limit = 270000,
343 static const struct intel_limit intel_limits_g4x_hdmi = {
344 .dot = { .min = 22000, .max = 400000 },
345 .vco = { .min = 1750000, .max = 3500000},
346 .n = { .min = 1, .max = 4 },
347 .m = { .min = 104, .max = 138 },
348 .m1 = { .min = 16, .max = 23 },
349 .m2 = { .min = 5, .max = 11 },
350 .p = { .min = 5, .max = 80 },
351 .p1 = { .min = 1, .max = 8},
352 .p2 = { .dot_limit = 165000,
353 .p2_slow = 10, .p2_fast = 5 },
356 static const struct intel_limit intel_limits_g4x_single_channel_lvds = {
357 .dot = { .min = 20000, .max = 115000 },
358 .vco = { .min = 1750000, .max = 3500000 },
359 .n = { .min = 1, .max = 3 },
360 .m = { .min = 104, .max = 138 },
361 .m1 = { .min = 17, .max = 23 },
362 .m2 = { .min = 5, .max = 11 },
363 .p = { .min = 28, .max = 112 },
364 .p1 = { .min = 2, .max = 8 },
365 .p2 = { .dot_limit = 0,
366 .p2_slow = 14, .p2_fast = 14
370 static const struct intel_limit intel_limits_g4x_dual_channel_lvds = {
371 .dot = { .min = 80000, .max = 224000 },
372 .vco = { .min = 1750000, .max = 3500000 },
373 .n = { .min = 1, .max = 3 },
374 .m = { .min = 104, .max = 138 },
375 .m1 = { .min = 17, .max = 23 },
376 .m2 = { .min = 5, .max = 11 },
377 .p = { .min = 14, .max = 42 },
378 .p1 = { .min = 2, .max = 6 },
379 .p2 = { .dot_limit = 0,
380 .p2_slow = 7, .p2_fast = 7
384 static const struct intel_limit intel_limits_pineview_sdvo = {
385 .dot = { .min = 20000, .max = 400000},
386 .vco = { .min = 1700000, .max = 3500000 },
387 /* Pineview's Ncounter is a ring counter */
388 .n = { .min = 3, .max = 6 },
389 .m = { .min = 2, .max = 256 },
390 /* Pineview only has one combined m divider, which we treat as m2. */
391 .m1 = { .min = 0, .max = 0 },
392 .m2 = { .min = 0, .max = 254 },
393 .p = { .min = 5, .max = 80 },
394 .p1 = { .min = 1, .max = 8 },
395 .p2 = { .dot_limit = 200000,
396 .p2_slow = 10, .p2_fast = 5 },
399 static const struct intel_limit intel_limits_pineview_lvds = {
400 .dot = { .min = 20000, .max = 400000 },
401 .vco = { .min = 1700000, .max = 3500000 },
402 .n = { .min = 3, .max = 6 },
403 .m = { .min = 2, .max = 256 },
404 .m1 = { .min = 0, .max = 0 },
405 .m2 = { .min = 0, .max = 254 },
406 .p = { .min = 7, .max = 112 },
407 .p1 = { .min = 1, .max = 8 },
408 .p2 = { .dot_limit = 112000,
409 .p2_slow = 14, .p2_fast = 14 },
412 /* Ironlake / Sandybridge
414 * We calculate clock using (register_value + 2) for N/M1/M2, so here
415 * the range value for them is (actual_value - 2).
417 static const struct intel_limit intel_limits_ironlake_dac = {
418 .dot = { .min = 25000, .max = 350000 },
419 .vco = { .min = 1760000, .max = 3510000 },
420 .n = { .min = 1, .max = 5 },
421 .m = { .min = 79, .max = 127 },
422 .m1 = { .min = 12, .max = 22 },
423 .m2 = { .min = 5, .max = 9 },
424 .p = { .min = 5, .max = 80 },
425 .p1 = { .min = 1, .max = 8 },
426 .p2 = { .dot_limit = 225000,
427 .p2_slow = 10, .p2_fast = 5 },
430 static const struct intel_limit intel_limits_ironlake_single_lvds = {
431 .dot = { .min = 25000, .max = 350000 },
432 .vco = { .min = 1760000, .max = 3510000 },
433 .n = { .min = 1, .max = 3 },
434 .m = { .min = 79, .max = 118 },
435 .m1 = { .min = 12, .max = 22 },
436 .m2 = { .min = 5, .max = 9 },
437 .p = { .min = 28, .max = 112 },
438 .p1 = { .min = 2, .max = 8 },
439 .p2 = { .dot_limit = 225000,
440 .p2_slow = 14, .p2_fast = 14 },
443 static const struct intel_limit intel_limits_ironlake_dual_lvds = {
444 .dot = { .min = 25000, .max = 350000 },
445 .vco = { .min = 1760000, .max = 3510000 },
446 .n = { .min = 1, .max = 3 },
447 .m = { .min = 79, .max = 127 },
448 .m1 = { .min = 12, .max = 22 },
449 .m2 = { .min = 5, .max = 9 },
450 .p = { .min = 14, .max = 56 },
451 .p1 = { .min = 2, .max = 8 },
452 .p2 = { .dot_limit = 225000,
453 .p2_slow = 7, .p2_fast = 7 },
456 /* LVDS 100mhz refclk limits. */
457 static const struct intel_limit intel_limits_ironlake_single_lvds_100m = {
458 .dot = { .min = 25000, .max = 350000 },
459 .vco = { .min = 1760000, .max = 3510000 },
460 .n = { .min = 1, .max = 2 },
461 .m = { .min = 79, .max = 126 },
462 .m1 = { .min = 12, .max = 22 },
463 .m2 = { .min = 5, .max = 9 },
464 .p = { .min = 28, .max = 112 },
465 .p1 = { .min = 2, .max = 8 },
466 .p2 = { .dot_limit = 225000,
467 .p2_slow = 14, .p2_fast = 14 },
470 static const struct intel_limit intel_limits_ironlake_dual_lvds_100m = {
471 .dot = { .min = 25000, .max = 350000 },
472 .vco = { .min = 1760000, .max = 3510000 },
473 .n = { .min = 1, .max = 3 },
474 .m = { .min = 79, .max = 126 },
475 .m1 = { .min = 12, .max = 22 },
476 .m2 = { .min = 5, .max = 9 },
477 .p = { .min = 14, .max = 42 },
478 .p1 = { .min = 2, .max = 6 },
479 .p2 = { .dot_limit = 225000,
480 .p2_slow = 7, .p2_fast = 7 },
483 static const struct intel_limit intel_limits_vlv = {
485 * These are the data rate limits (measured in fast clocks)
486 * since those are the strictest limits we have. The fast
487 * clock and actual rate limits are more relaxed, so checking
488 * them would make no difference.
490 .dot = { .min = 25000 * 5, .max = 270000 * 5 },
491 .vco = { .min = 4000000, .max = 6000000 },
492 .n = { .min = 1, .max = 7 },
493 .m1 = { .min = 2, .max = 3 },
494 .m2 = { .min = 11, .max = 156 },
495 .p1 = { .min = 2, .max = 3 },
496 .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
499 static const struct intel_limit intel_limits_chv = {
501 * These are the data rate limits (measured in fast clocks)
502 * since those are the strictest limits we have. The fast
503 * clock and actual rate limits are more relaxed, so checking
504 * them would make no difference.
506 .dot = { .min = 25000 * 5, .max = 540000 * 5},
507 .vco = { .min = 4800000, .max = 6480000 },
508 .n = { .min = 1, .max = 1 },
509 .m1 = { .min = 2, .max = 2 },
510 .m2 = { .min = 24 << 22, .max = 175 << 22 },
511 .p1 = { .min = 2, .max = 4 },
512 .p2 = { .p2_slow = 1, .p2_fast = 14 },
515 static const struct intel_limit intel_limits_bxt = {
516 /* FIXME: find real dot limits */
517 .dot = { .min = 0, .max = INT_MAX },
518 .vco = { .min = 4800000, .max = 6700000 },
519 .n = { .min = 1, .max = 1 },
520 .m1 = { .min = 2, .max = 2 },
521 /* FIXME: find real m2 limits */
522 .m2 = { .min = 2 << 22, .max = 255 << 22 },
523 .p1 = { .min = 2, .max = 4 },
524 .p2 = { .p2_slow = 1, .p2_fast = 20 },
528 needs_modeset(struct drm_crtc_state *state)
530 return drm_atomic_crtc_needs_modeset(state);
534 * Returns whether any output on the specified pipe is of the specified type
536 bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type)
538 struct drm_device *dev = crtc->base.dev;
539 struct intel_encoder *encoder;
541 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
542 if (encoder->type == type)
549 * Returns whether any output on the specified pipe will have the specified
550 * type after a staged modeset is complete, i.e., the same as
551 * intel_pipe_has_type() but looking at encoder->new_crtc instead of
554 static bool intel_pipe_will_have_type(const struct intel_crtc_state *crtc_state,
557 struct drm_atomic_state *state = crtc_state->base.state;
558 struct drm_connector *connector;
559 struct drm_connector_state *connector_state;
560 struct intel_encoder *encoder;
561 int i, num_connectors = 0;
563 for_each_connector_in_state(state, connector, connector_state, i) {
564 if (connector_state->crtc != crtc_state->base.crtc)
569 encoder = to_intel_encoder(connector_state->best_encoder);
570 if (encoder->type == type)
574 WARN_ON(num_connectors == 0);
580 * Platform specific helpers to calculate the port PLL loopback- (clock.m),
581 * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
582 * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
583 * The helpers' return value is the rate of the clock that is fed to the
584 * display engine's pipe which can be the above fast dot clock rate or a
585 * divided-down version of it.
587 /* m1 is reserved as 0 in Pineview, n is a ring counter */
588 static int pnv_calc_dpll_params(int refclk, struct dpll *clock)
590 clock->m = clock->m2 + 2;
591 clock->p = clock->p1 * clock->p2;
592 if (WARN_ON(clock->n == 0 || clock->p == 0))
594 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
595 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
600 static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
602 return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
605 static int i9xx_calc_dpll_params(int refclk, struct dpll *clock)
607 clock->m = i9xx_dpll_compute_m(clock);
608 clock->p = clock->p1 * clock->p2;
609 if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
611 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
612 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
617 static int vlv_calc_dpll_params(int refclk, struct dpll *clock)
619 clock->m = clock->m1 * clock->m2;
620 clock->p = clock->p1 * clock->p2;
621 if (WARN_ON(clock->n == 0 || clock->p == 0))
623 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
624 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
626 return clock->dot / 5;
629 int chv_calc_dpll_params(int refclk, struct dpll *clock)
631 clock->m = clock->m1 * clock->m2;
632 clock->p = clock->p1 * clock->p2;
633 if (WARN_ON(clock->n == 0 || clock->p == 0))
635 clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
637 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
639 return clock->dot / 5;
642 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
644 * Returns whether the given set of divisors are valid for a given refclk with
645 * the given connectors.
648 static bool intel_PLL_is_valid(struct drm_device *dev,
649 const struct intel_limit *limit,
650 const struct dpll *clock)
652 if (clock->n < limit->n.min || limit->n.max < clock->n)
653 INTELPllInvalid("n out of range\n");
654 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
655 INTELPllInvalid("p1 out of range\n");
656 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
657 INTELPllInvalid("m2 out of range\n");
658 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
659 INTELPllInvalid("m1 out of range\n");
661 if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev) &&
662 !IS_CHERRYVIEW(dev) && !IS_BROXTON(dev))
663 if (clock->m1 <= clock->m2)
664 INTELPllInvalid("m1 <= m2\n");
666 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) && !IS_BROXTON(dev)) {
667 if (clock->p < limit->p.min || limit->p.max < clock->p)
668 INTELPllInvalid("p out of range\n");
669 if (clock->m < limit->m.min || limit->m.max < clock->m)
670 INTELPllInvalid("m out of range\n");
673 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
674 INTELPllInvalid("vco out of range\n");
675 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
676 * connector, etc., rather than just a single range.
678 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
679 INTELPllInvalid("dot out of range\n");
685 i9xx_select_p2_div(const struct intel_limit *limit,
686 const struct intel_crtc_state *crtc_state,
689 struct drm_device *dev = crtc_state->base.crtc->dev;
691 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
693 * For LVDS just rely on its current settings for dual-channel.
694 * We haven't figured out how to reliably set up different
695 * single/dual channel state, if we even can.
697 if (intel_is_dual_link_lvds(dev))
698 return limit->p2.p2_fast;
700 return limit->p2.p2_slow;
702 if (target < limit->p2.dot_limit)
703 return limit->p2.p2_slow;
705 return limit->p2.p2_fast;
710 * Returns a set of divisors for the desired target clock with the given
711 * refclk, or FALSE. The returned values represent the clock equation:
712 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
714 * Target and reference clocks are specified in kHz.
716 * If match_clock is provided, then best_clock P divider must match the P
717 * divider from @match_clock used for LVDS downclocking.
720 i9xx_find_best_dpll(const struct intel_limit *limit,
721 struct intel_crtc_state *crtc_state,
722 int target, int refclk, struct dpll *match_clock,
723 struct dpll *best_clock)
725 struct drm_device *dev = crtc_state->base.crtc->dev;
729 memset(best_clock, 0, sizeof(*best_clock));
731 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
733 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
735 for (clock.m2 = limit->m2.min;
736 clock.m2 <= limit->m2.max; clock.m2++) {
737 if (clock.m2 >= clock.m1)
739 for (clock.n = limit->n.min;
740 clock.n <= limit->n.max; clock.n++) {
741 for (clock.p1 = limit->p1.min;
742 clock.p1 <= limit->p1.max; clock.p1++) {
745 i9xx_calc_dpll_params(refclk, &clock);
746 if (!intel_PLL_is_valid(dev, limit,
750 clock.p != match_clock->p)
753 this_err = abs(clock.dot - target);
754 if (this_err < err) {
763 return (err != target);
767 * Returns a set of divisors for the desired target clock with the given
768 * refclk, or FALSE. The returned values represent the clock equation:
769 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
771 * Target and reference clocks are specified in kHz.
773 * If match_clock is provided, then best_clock P divider must match the P
774 * divider from @match_clock used for LVDS downclocking.
777 pnv_find_best_dpll(const struct intel_limit *limit,
778 struct intel_crtc_state *crtc_state,
779 int target, int refclk, struct dpll *match_clock,
780 struct dpll *best_clock)
782 struct drm_device *dev = crtc_state->base.crtc->dev;
786 memset(best_clock, 0, sizeof(*best_clock));
788 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
790 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
792 for (clock.m2 = limit->m2.min;
793 clock.m2 <= limit->m2.max; clock.m2++) {
794 for (clock.n = limit->n.min;
795 clock.n <= limit->n.max; clock.n++) {
796 for (clock.p1 = limit->p1.min;
797 clock.p1 <= limit->p1.max; clock.p1++) {
800 pnv_calc_dpll_params(refclk, &clock);
801 if (!intel_PLL_is_valid(dev, limit,
805 clock.p != match_clock->p)
808 this_err = abs(clock.dot - target);
809 if (this_err < err) {
818 return (err != target);
822 * Returns a set of divisors for the desired target clock with the given
823 * refclk, or FALSE. The returned values represent the clock equation:
824 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
826 * Target and reference clocks are specified in kHz.
828 * If match_clock is provided, then best_clock P divider must match the P
829 * divider from @match_clock used for LVDS downclocking.
832 g4x_find_best_dpll(const struct intel_limit *limit,
833 struct intel_crtc_state *crtc_state,
834 int target, int refclk, struct dpll *match_clock,
835 struct dpll *best_clock)
837 struct drm_device *dev = crtc_state->base.crtc->dev;
841 /* approximately equals target * 0.00585 */
842 int err_most = (target >> 8) + (target >> 9);
844 memset(best_clock, 0, sizeof(*best_clock));
846 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
848 max_n = limit->n.max;
849 /* based on hardware requirement, prefer smaller n to precision */
850 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
851 /* based on hardware requirement, prefere larger m1,m2 */
852 for (clock.m1 = limit->m1.max;
853 clock.m1 >= limit->m1.min; clock.m1--) {
854 for (clock.m2 = limit->m2.max;
855 clock.m2 >= limit->m2.min; clock.m2--) {
856 for (clock.p1 = limit->p1.max;
857 clock.p1 >= limit->p1.min; clock.p1--) {
860 i9xx_calc_dpll_params(refclk, &clock);
861 if (!intel_PLL_is_valid(dev, limit,
865 this_err = abs(clock.dot - target);
866 if (this_err < err_most) {
880 * Check if the calculated PLL configuration is more optimal compared to the
881 * best configuration and error found so far. Return the calculated error.
883 static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
884 const struct dpll *calculated_clock,
885 const struct dpll *best_clock,
886 unsigned int best_error_ppm,
887 unsigned int *error_ppm)
890 * For CHV ignore the error and consider only the P value.
891 * Prefer a bigger P value based on HW requirements.
893 if (IS_CHERRYVIEW(dev)) {
896 return calculated_clock->p > best_clock->p;
899 if (WARN_ON_ONCE(!target_freq))
902 *error_ppm = div_u64(1000000ULL *
903 abs(target_freq - calculated_clock->dot),
906 * Prefer a better P value over a better (smaller) error if the error
907 * is small. Ensure this preference for future configurations too by
908 * setting the error to 0.
910 if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
916 return *error_ppm + 10 < best_error_ppm;
920 * Returns a set of divisors for the desired target clock with the given
921 * refclk, or FALSE. The returned values represent the clock equation:
922 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
925 vlv_find_best_dpll(const struct intel_limit *limit,
926 struct intel_crtc_state *crtc_state,
927 int target, int refclk, struct dpll *match_clock,
928 struct dpll *best_clock)
930 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
931 struct drm_device *dev = crtc->base.dev;
933 unsigned int bestppm = 1000000;
934 /* min update 19.2 MHz */
935 int max_n = min(limit->n.max, refclk / 19200);
938 target *= 5; /* fast clock */
940 memset(best_clock, 0, sizeof(*best_clock));
942 /* based on hardware requirement, prefer smaller n to precision */
943 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
944 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
945 for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
946 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
947 clock.p = clock.p1 * clock.p2;
948 /* based on hardware requirement, prefer bigger m1,m2 values */
949 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
952 clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
955 vlv_calc_dpll_params(refclk, &clock);
957 if (!intel_PLL_is_valid(dev, limit,
961 if (!vlv_PLL_is_optimal(dev, target,
979 * Returns a set of divisors for the desired target clock with the given
980 * refclk, or FALSE. The returned values represent the clock equation:
981 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
984 chv_find_best_dpll(const struct intel_limit *limit,
985 struct intel_crtc_state *crtc_state,
986 int target, int refclk, struct dpll *match_clock,
987 struct dpll *best_clock)
989 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
990 struct drm_device *dev = crtc->base.dev;
991 unsigned int best_error_ppm;
996 memset(best_clock, 0, sizeof(*best_clock));
997 best_error_ppm = 1000000;
1000 * Based on hardware doc, the n always set to 1, and m1 always
1001 * set to 2. If requires to support 200Mhz refclk, we need to
1002 * revisit this because n may not 1 anymore.
1004 clock.n = 1, clock.m1 = 2;
1005 target *= 5; /* fast clock */
1007 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
1008 for (clock.p2 = limit->p2.p2_fast;
1009 clock.p2 >= limit->p2.p2_slow;
1010 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
1011 unsigned int error_ppm;
1013 clock.p = clock.p1 * clock.p2;
1015 m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p *
1016 clock.n) << 22, refclk * clock.m1);
1018 if (m2 > INT_MAX/clock.m1)
1023 chv_calc_dpll_params(refclk, &clock);
1025 if (!intel_PLL_is_valid(dev, limit, &clock))
1028 if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
1029 best_error_ppm, &error_ppm))
1032 *best_clock = clock;
1033 best_error_ppm = error_ppm;
1041 bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
1042 struct dpll *best_clock)
1044 int refclk = 100000;
1045 const struct intel_limit *limit = &intel_limits_bxt;
1047 return chv_find_best_dpll(limit, crtc_state,
1048 target_clock, refclk, NULL, best_clock);
1051 bool intel_crtc_active(struct drm_crtc *crtc)
1053 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1055 /* Be paranoid as we can arrive here with only partial
1056 * state retrieved from the hardware during setup.
1058 * We can ditch the adjusted_mode.crtc_clock check as soon
1059 * as Haswell has gained clock readout/fastboot support.
1061 * We can ditch the crtc->primary->fb check as soon as we can
1062 * properly reconstruct framebuffers.
1064 * FIXME: The intel_crtc->active here should be switched to
1065 * crtc->state->active once we have proper CRTC states wired up
1068 return intel_crtc->active && crtc->primary->state->fb &&
1069 intel_crtc->config->base.adjusted_mode.crtc_clock;
1072 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
1075 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1076 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1078 return intel_crtc->config->cpu_transcoder;
1081 static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
1083 struct drm_i915_private *dev_priv = dev->dev_private;
1084 i915_reg_t reg = PIPEDSL(pipe);
1089 line_mask = DSL_LINEMASK_GEN2;
1091 line_mask = DSL_LINEMASK_GEN3;
1093 line1 = I915_READ(reg) & line_mask;
1095 line2 = I915_READ(reg) & line_mask;
1097 return line1 == line2;
1101 * intel_wait_for_pipe_off - wait for pipe to turn off
1102 * @crtc: crtc whose pipe to wait for
1104 * After disabling a pipe, we can't wait for vblank in the usual way,
1105 * spinning on the vblank interrupt status bit, since we won't actually
1106 * see an interrupt when the pipe is disabled.
1108 * On Gen4 and above:
1109 * wait for the pipe register state bit to turn off
1112 * wait for the display line value to settle (it usually
1113 * ends up stopping at the start of the next frame).
1116 static void intel_wait_for_pipe_off(struct intel_crtc *crtc)
1118 struct drm_device *dev = crtc->base.dev;
1119 struct drm_i915_private *dev_priv = dev->dev_private;
1120 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
1121 enum pipe pipe = crtc->pipe;
1123 if (INTEL_INFO(dev)->gen >= 4) {
1124 i915_reg_t reg = PIPECONF(cpu_transcoder);
1126 /* Wait for the Pipe State to go off */
1127 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
1129 WARN(1, "pipe_off wait timed out\n");
1131 /* Wait for the display line to settle */
1132 if (wait_for(pipe_dsl_stopped(dev, pipe), 100))
1133 WARN(1, "pipe_off wait timed out\n");
1137 /* Only for pre-ILK configs */
1138 void assert_pll(struct drm_i915_private *dev_priv,
1139 enum pipe pipe, bool state)
1144 val = I915_READ(DPLL(pipe));
1145 cur_state = !!(val & DPLL_VCO_ENABLE);
1146 I915_STATE_WARN(cur_state != state,
1147 "PLL state assertion failure (expected %s, current %s)\n",
1148 onoff(state), onoff(cur_state));
1151 /* XXX: the dsi pll is shared between MIPI DSI ports */
1152 void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
1157 mutex_lock(&dev_priv->sb_lock);
1158 val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
1159 mutex_unlock(&dev_priv->sb_lock);
1161 cur_state = val & DSI_PLL_VCO_EN;
1162 I915_STATE_WARN(cur_state != state,
1163 "DSI PLL state assertion failure (expected %s, current %s)\n",
1164 onoff(state), onoff(cur_state));
1167 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1168 enum pipe pipe, bool state)
1171 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1174 if (HAS_DDI(dev_priv)) {
1175 /* DDI does not have a specific FDI_TX register */
1176 u32 val = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
1177 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1179 u32 val = I915_READ(FDI_TX_CTL(pipe));
1180 cur_state = !!(val & FDI_TX_ENABLE);
1182 I915_STATE_WARN(cur_state != state,
1183 "FDI TX state assertion failure (expected %s, current %s)\n",
1184 onoff(state), onoff(cur_state));
1186 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1187 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1189 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1190 enum pipe pipe, bool state)
1195 val = I915_READ(FDI_RX_CTL(pipe));
1196 cur_state = !!(val & FDI_RX_ENABLE);
1197 I915_STATE_WARN(cur_state != state,
1198 "FDI RX state assertion failure (expected %s, current %s)\n",
1199 onoff(state), onoff(cur_state));
1201 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1202 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1204 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1209 /* ILK FDI PLL is always enabled */
1210 if (IS_GEN5(dev_priv))
1213 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1214 if (HAS_DDI(dev_priv))
1217 val = I915_READ(FDI_TX_CTL(pipe));
1218 I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1221 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
1222 enum pipe pipe, bool state)
1227 val = I915_READ(FDI_RX_CTL(pipe));
1228 cur_state = !!(val & FDI_RX_PLL_ENABLE);
1229 I915_STATE_WARN(cur_state != state,
1230 "FDI RX PLL assertion failure (expected %s, current %s)\n",
1231 onoff(state), onoff(cur_state));
1234 void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1237 struct drm_device *dev = dev_priv->dev;
1240 enum pipe panel_pipe = PIPE_A;
1243 if (WARN_ON(HAS_DDI(dev)))
1246 if (HAS_PCH_SPLIT(dev)) {
1249 pp_reg = PCH_PP_CONTROL;
1250 port_sel = I915_READ(PCH_PP_ON_DELAYS) & PANEL_PORT_SELECT_MASK;
1252 if (port_sel == PANEL_PORT_SELECT_LVDS &&
1253 I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
1254 panel_pipe = PIPE_B;
1255 /* XXX: else fix for eDP */
1256 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
1257 /* presumably write lock depends on pipe, not port select */
1258 pp_reg = VLV_PIPE_PP_CONTROL(pipe);
1261 pp_reg = PP_CONTROL;
1262 if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
1263 panel_pipe = PIPE_B;
1266 val = I915_READ(pp_reg);
1267 if (!(val & PANEL_POWER_ON) ||
1268 ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
1271 I915_STATE_WARN(panel_pipe == pipe && locked,
1272 "panel assertion failure, pipe %c regs locked\n",
1276 static void assert_cursor(struct drm_i915_private *dev_priv,
1277 enum pipe pipe, bool state)
1279 struct drm_device *dev = dev_priv->dev;
1282 if (IS_845G(dev) || IS_I865G(dev))
1283 cur_state = I915_READ(CURCNTR(PIPE_A)) & CURSOR_ENABLE;
1285 cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
1287 I915_STATE_WARN(cur_state != state,
1288 "cursor on pipe %c assertion failure (expected %s, current %s)\n",
1289 pipe_name(pipe), onoff(state), onoff(cur_state));
1291 #define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
1292 #define assert_cursor_disabled(d, p) assert_cursor(d, p, false)
1294 void assert_pipe(struct drm_i915_private *dev_priv,
1295 enum pipe pipe, bool state)
1298 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1300 enum intel_display_power_domain power_domain;
1302 /* if we need the pipe quirk it must be always on */
1303 if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
1304 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
1307 power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
1308 if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
1309 u32 val = I915_READ(PIPECONF(cpu_transcoder));
1310 cur_state = !!(val & PIPECONF_ENABLE);
1312 intel_display_power_put(dev_priv, power_domain);
1317 I915_STATE_WARN(cur_state != state,
1318 "pipe %c assertion failure (expected %s, current %s)\n",
1319 pipe_name(pipe), onoff(state), onoff(cur_state));
1322 static void assert_plane(struct drm_i915_private *dev_priv,
1323 enum plane plane, bool state)
1328 val = I915_READ(DSPCNTR(plane));
1329 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1330 I915_STATE_WARN(cur_state != state,
1331 "plane %c assertion failure (expected %s, current %s)\n",
1332 plane_name(plane), onoff(state), onoff(cur_state));
1335 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1336 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1338 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1341 struct drm_device *dev = dev_priv->dev;
1344 /* Primary planes are fixed to pipes on gen4+ */
1345 if (INTEL_INFO(dev)->gen >= 4) {
1346 u32 val = I915_READ(DSPCNTR(pipe));
1347 I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
1348 "plane %c assertion failure, should be disabled but not\n",
1353 /* Need to check both planes against the pipe */
1354 for_each_pipe(dev_priv, i) {
1355 u32 val = I915_READ(DSPCNTR(i));
1356 enum pipe cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1357 DISPPLANE_SEL_PIPE_SHIFT;
1358 I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1359 "plane %c assertion failure, should be off on pipe %c but is still active\n",
1360 plane_name(i), pipe_name(pipe));
1364 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1367 struct drm_device *dev = dev_priv->dev;
1370 if (INTEL_INFO(dev)->gen >= 9) {
1371 for_each_sprite(dev_priv, pipe, sprite) {
1372 u32 val = I915_READ(PLANE_CTL(pipe, sprite));
1373 I915_STATE_WARN(val & PLANE_CTL_ENABLE,
1374 "plane %d assertion failure, should be off on pipe %c but is still active\n",
1375 sprite, pipe_name(pipe));
1377 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
1378 for_each_sprite(dev_priv, pipe, sprite) {
1379 u32 val = I915_READ(SPCNTR(pipe, sprite));
1380 I915_STATE_WARN(val & SP_ENABLE,
1381 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1382 sprite_name(pipe, sprite), pipe_name(pipe));
1384 } else if (INTEL_INFO(dev)->gen >= 7) {
1385 u32 val = I915_READ(SPRCTL(pipe));
1386 I915_STATE_WARN(val & SPRITE_ENABLE,
1387 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1388 plane_name(pipe), pipe_name(pipe));
1389 } else if (INTEL_INFO(dev)->gen >= 5) {
1390 u32 val = I915_READ(DVSCNTR(pipe));
1391 I915_STATE_WARN(val & DVS_ENABLE,
1392 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1393 plane_name(pipe), pipe_name(pipe));
1397 static void assert_vblank_disabled(struct drm_crtc *crtc)
1399 if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
1400 drm_crtc_vblank_put(crtc);
1403 void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1409 val = I915_READ(PCH_TRANSCONF(pipe));
1410 enabled = !!(val & TRANS_ENABLE);
1411 I915_STATE_WARN(enabled,
1412 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1416 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1417 enum pipe pipe, u32 port_sel, u32 val)
1419 if ((val & DP_PORT_EN) == 0)
1422 if (HAS_PCH_CPT(dev_priv)) {
1423 u32 trans_dp_ctl = I915_READ(TRANS_DP_CTL(pipe));
1424 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1426 } else if (IS_CHERRYVIEW(dev_priv)) {
1427 if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe))
1430 if ((val & DP_PIPE_MASK) != (pipe << 30))
1436 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1437 enum pipe pipe, u32 val)
1439 if ((val & SDVO_ENABLE) == 0)
1442 if (HAS_PCH_CPT(dev_priv)) {
1443 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1445 } else if (IS_CHERRYVIEW(dev_priv)) {
1446 if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe))
1449 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1455 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1456 enum pipe pipe, u32 val)
1458 if ((val & LVDS_PORT_EN) == 0)
1461 if (HAS_PCH_CPT(dev_priv)) {
1462 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1465 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1471 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1472 enum pipe pipe, u32 val)
1474 if ((val & ADPA_DAC_ENABLE) == 0)
1476 if (HAS_PCH_CPT(dev_priv)) {
1477 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1480 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1486 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1487 enum pipe pipe, i915_reg_t reg,
1490 u32 val = I915_READ(reg);
1491 I915_STATE_WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1492 "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1493 i915_mmio_reg_offset(reg), pipe_name(pipe));
1495 I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && (val & DP_PORT_EN) == 0
1496 && (val & DP_PIPEB_SELECT),
1497 "IBX PCH dp port still using transcoder B\n");
1500 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1501 enum pipe pipe, i915_reg_t reg)
1503 u32 val = I915_READ(reg);
1504 I915_STATE_WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1505 "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1506 i915_mmio_reg_offset(reg), pipe_name(pipe));
1508 I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && (val & SDVO_ENABLE) == 0
1509 && (val & SDVO_PIPE_B_SELECT),
1510 "IBX PCH hdmi port still using transcoder B\n");
1513 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1518 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1519 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1520 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1522 val = I915_READ(PCH_ADPA);
1523 I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1524 "PCH VGA enabled on transcoder %c, should be disabled\n",
1527 val = I915_READ(PCH_LVDS);
1528 I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1529 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1532 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1533 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1534 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1537 static void _vlv_enable_pll(struct intel_crtc *crtc,
1538 const struct intel_crtc_state *pipe_config)
1540 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1541 enum pipe pipe = crtc->pipe;
1543 I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1544 POSTING_READ(DPLL(pipe));
1547 if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1548 DRM_ERROR("DPLL %d failed to lock\n", pipe);
1551 static void vlv_enable_pll(struct intel_crtc *crtc,
1552 const struct intel_crtc_state *pipe_config)
1554 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1555 enum pipe pipe = crtc->pipe;
1557 assert_pipe_disabled(dev_priv, pipe);
1559 /* PLL is protected by panel, make sure we can write it */
1560 assert_panel_unlocked(dev_priv, pipe);
1562 if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
1563 _vlv_enable_pll(crtc, pipe_config);
1565 I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1566 POSTING_READ(DPLL_MD(pipe));
1570 static void _chv_enable_pll(struct intel_crtc *crtc,
1571 const struct intel_crtc_state *pipe_config)
1573 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1574 enum pipe pipe = crtc->pipe;
1575 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1578 mutex_lock(&dev_priv->sb_lock);
1580 /* Enable back the 10bit clock to display controller */
1581 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1582 tmp |= DPIO_DCLKP_EN;
1583 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
1585 mutex_unlock(&dev_priv->sb_lock);
1588 * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
1593 I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1595 /* Check PLL is locked */
1596 if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1597 DRM_ERROR("PLL %d failed to lock\n", pipe);
1600 static void chv_enable_pll(struct intel_crtc *crtc,
1601 const struct intel_crtc_state *pipe_config)
1603 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1604 enum pipe pipe = crtc->pipe;
1606 assert_pipe_disabled(dev_priv, pipe);
1608 /* PLL is protected by panel, make sure we can write it */
1609 assert_panel_unlocked(dev_priv, pipe);
1611 if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
1612 _chv_enable_pll(crtc, pipe_config);
1614 if (pipe != PIPE_A) {
1616 * WaPixelRepeatModeFixForC0:chv
1618 * DPLLCMD is AWOL. Use chicken bits to propagate
1619 * the value from DPLLBMD to either pipe B or C.
1621 I915_WRITE(CBR4_VLV, pipe == PIPE_B ? CBR_DPLLBMD_PIPE_B : CBR_DPLLBMD_PIPE_C);
1622 I915_WRITE(DPLL_MD(PIPE_B), pipe_config->dpll_hw_state.dpll_md);
1623 I915_WRITE(CBR4_VLV, 0);
1624 dev_priv->chv_dpll_md[pipe] = pipe_config->dpll_hw_state.dpll_md;
1627 * DPLLB VGA mode also seems to cause problems.
1628 * We should always have it disabled.
1630 WARN_ON((I915_READ(DPLL(PIPE_B)) & DPLL_VGA_MODE_DIS) == 0);
1632 I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1633 POSTING_READ(DPLL_MD(pipe));
1637 static int intel_num_dvo_pipes(struct drm_device *dev)
1639 struct intel_crtc *crtc;
1642 for_each_intel_crtc(dev, crtc)
1643 count += crtc->base.state->active &&
1644 intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
1649 static void i9xx_enable_pll(struct intel_crtc *crtc)
1651 struct drm_device *dev = crtc->base.dev;
1652 struct drm_i915_private *dev_priv = dev->dev_private;
1653 i915_reg_t reg = DPLL(crtc->pipe);
1654 u32 dpll = crtc->config->dpll_hw_state.dpll;
1656 assert_pipe_disabled(dev_priv, crtc->pipe);
1658 /* PLL is protected by panel, make sure we can write it */
1659 if (IS_MOBILE(dev) && !IS_I830(dev))
1660 assert_panel_unlocked(dev_priv, crtc->pipe);
1662 /* Enable DVO 2x clock on both PLLs if necessary */
1663 if (IS_I830(dev) && intel_num_dvo_pipes(dev) > 0) {
1665 * It appears to be important that we don't enable this
1666 * for the current pipe before otherwise configuring the
1667 * PLL. No idea how this should be handled if multiple
1668 * DVO outputs are enabled simultaneosly.
1670 dpll |= DPLL_DVO_2X_MODE;
1671 I915_WRITE(DPLL(!crtc->pipe),
1672 I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
1676 * Apparently we need to have VGA mode enabled prior to changing
1677 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
1678 * dividers, even though the register value does change.
1682 I915_WRITE(reg, dpll);
1684 /* Wait for the clocks to stabilize. */
1688 if (INTEL_INFO(dev)->gen >= 4) {
1689 I915_WRITE(DPLL_MD(crtc->pipe),
1690 crtc->config->dpll_hw_state.dpll_md);
1692 /* The pixel multiplier can only be updated once the
1693 * DPLL is enabled and the clocks are stable.
1695 * So write it again.
1697 I915_WRITE(reg, dpll);
1700 /* We do this three times for luck */
1701 I915_WRITE(reg, dpll);
1703 udelay(150); /* wait for warmup */
1704 I915_WRITE(reg, dpll);
1706 udelay(150); /* wait for warmup */
1707 I915_WRITE(reg, dpll);
1709 udelay(150); /* wait for warmup */
1713 * i9xx_disable_pll - disable a PLL
1714 * @dev_priv: i915 private structure
1715 * @pipe: pipe PLL to disable
1717 * Disable the PLL for @pipe, making sure the pipe is off first.
1719 * Note! This is for pre-ILK only.
1721 static void i9xx_disable_pll(struct intel_crtc *crtc)
1723 struct drm_device *dev = crtc->base.dev;
1724 struct drm_i915_private *dev_priv = dev->dev_private;
1725 enum pipe pipe = crtc->pipe;
1727 /* Disable DVO 2x clock on both PLLs if necessary */
1729 intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
1730 !intel_num_dvo_pipes(dev)) {
1731 I915_WRITE(DPLL(PIPE_B),
1732 I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
1733 I915_WRITE(DPLL(PIPE_A),
1734 I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE);
1737 /* Don't disable pipe or pipe PLLs if needed */
1738 if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
1739 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
1742 /* Make sure the pipe isn't still relying on us */
1743 assert_pipe_disabled(dev_priv, pipe);
1745 I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
1746 POSTING_READ(DPLL(pipe));
1749 static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1753 /* Make sure the pipe isn't still relying on us */
1754 assert_pipe_disabled(dev_priv, pipe);
1756 val = DPLL_INTEGRATED_REF_CLK_VLV |
1757 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
1759 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1761 I915_WRITE(DPLL(pipe), val);
1762 POSTING_READ(DPLL(pipe));
1765 static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1767 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1770 /* Make sure the pipe isn't still relying on us */
1771 assert_pipe_disabled(dev_priv, pipe);
1773 val = DPLL_SSC_REF_CLK_CHV |
1774 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
1776 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1778 I915_WRITE(DPLL(pipe), val);
1779 POSTING_READ(DPLL(pipe));
1781 mutex_lock(&dev_priv->sb_lock);
1783 /* Disable 10bit clock to display controller */
1784 val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1785 val &= ~DPIO_DCLKP_EN;
1786 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
1788 mutex_unlock(&dev_priv->sb_lock);
1791 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
1792 struct intel_digital_port *dport,
1793 unsigned int expected_mask)
1796 i915_reg_t dpll_reg;
1798 switch (dport->port) {
1800 port_mask = DPLL_PORTB_READY_MASK;
1804 port_mask = DPLL_PORTC_READY_MASK;
1806 expected_mask <<= 4;
1809 port_mask = DPLL_PORTD_READY_MASK;
1810 dpll_reg = DPIO_PHY_STATUS;
1816 if (wait_for((I915_READ(dpll_reg) & port_mask) == expected_mask, 1000))
1817 WARN(1, "timed out waiting for port %c ready: got 0x%x, expected 0x%x\n",
1818 port_name(dport->port), I915_READ(dpll_reg) & port_mask, expected_mask);
1821 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1824 struct drm_device *dev = dev_priv->dev;
1825 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1826 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1828 uint32_t val, pipeconf_val;
1830 /* Make sure PCH DPLL is enabled */
1831 assert_shared_dpll_enabled(dev_priv, intel_crtc->config->shared_dpll);
1833 /* FDI must be feeding us bits for PCH ports */
1834 assert_fdi_tx_enabled(dev_priv, pipe);
1835 assert_fdi_rx_enabled(dev_priv, pipe);
1837 if (HAS_PCH_CPT(dev)) {
1838 /* Workaround: Set the timing override bit before enabling the
1839 * pch transcoder. */
1840 reg = TRANS_CHICKEN2(pipe);
1841 val = I915_READ(reg);
1842 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1843 I915_WRITE(reg, val);
1846 reg = PCH_TRANSCONF(pipe);
1847 val = I915_READ(reg);
1848 pipeconf_val = I915_READ(PIPECONF(pipe));
1850 if (HAS_PCH_IBX(dev_priv)) {
1852 * Make the BPC in transcoder be consistent with
1853 * that in pipeconf reg. For HDMI we must use 8bpc
1854 * here for both 8bpc and 12bpc.
1856 val &= ~PIPECONF_BPC_MASK;
1857 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_HDMI))
1858 val |= PIPECONF_8BPC;
1860 val |= pipeconf_val & PIPECONF_BPC_MASK;
1863 val &= ~TRANS_INTERLACE_MASK;
1864 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1865 if (HAS_PCH_IBX(dev_priv) &&
1866 intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
1867 val |= TRANS_LEGACY_INTERLACED_ILK;
1869 val |= TRANS_INTERLACED;
1871 val |= TRANS_PROGRESSIVE;
1873 I915_WRITE(reg, val | TRANS_ENABLE);
1874 if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1875 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
1878 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1879 enum transcoder cpu_transcoder)
1881 u32 val, pipeconf_val;
1883 /* FDI must be feeding us bits for PCH ports */
1884 assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1885 assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
1887 /* Workaround: set timing override bit. */
1888 val = I915_READ(TRANS_CHICKEN2(PIPE_A));
1889 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1890 I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
1893 pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1895 if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1896 PIPECONF_INTERLACED_ILK)
1897 val |= TRANS_INTERLACED;
1899 val |= TRANS_PROGRESSIVE;
1901 I915_WRITE(LPT_TRANSCONF, val);
1902 if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
1903 DRM_ERROR("Failed to enable PCH transcoder\n");
1906 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1909 struct drm_device *dev = dev_priv->dev;
1913 /* FDI relies on the transcoder */
1914 assert_fdi_tx_disabled(dev_priv, pipe);
1915 assert_fdi_rx_disabled(dev_priv, pipe);
1917 /* Ports must be off as well */
1918 assert_pch_ports_disabled(dev_priv, pipe);
1920 reg = PCH_TRANSCONF(pipe);
1921 val = I915_READ(reg);
1922 val &= ~TRANS_ENABLE;
1923 I915_WRITE(reg, val);
1924 /* wait for PCH transcoder off, transcoder state */
1925 if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1926 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
1928 if (HAS_PCH_CPT(dev)) {
1929 /* Workaround: Clear the timing override chicken bit again. */
1930 reg = TRANS_CHICKEN2(pipe);
1931 val = I915_READ(reg);
1932 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1933 I915_WRITE(reg, val);
1937 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1941 val = I915_READ(LPT_TRANSCONF);
1942 val &= ~TRANS_ENABLE;
1943 I915_WRITE(LPT_TRANSCONF, val);
1944 /* wait for PCH transcoder off, transcoder state */
1945 if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
1946 DRM_ERROR("Failed to disable PCH transcoder\n");
1948 /* Workaround: clear timing override bit. */
1949 val = I915_READ(TRANS_CHICKEN2(PIPE_A));
1950 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1951 I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
1955 * intel_enable_pipe - enable a pipe, asserting requirements
1956 * @crtc: crtc responsible for the pipe
1958 * Enable @crtc's pipe, making sure that various hardware specific requirements
1959 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1961 static void intel_enable_pipe(struct intel_crtc *crtc)
1963 struct drm_device *dev = crtc->base.dev;
1964 struct drm_i915_private *dev_priv = dev->dev_private;
1965 enum pipe pipe = crtc->pipe;
1966 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
1967 enum pipe pch_transcoder;
1971 DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe));
1973 assert_planes_disabled(dev_priv, pipe);
1974 assert_cursor_disabled(dev_priv, pipe);
1975 assert_sprites_disabled(dev_priv, pipe);
1977 if (HAS_PCH_LPT(dev_priv))
1978 pch_transcoder = TRANSCODER_A;
1980 pch_transcoder = pipe;
1983 * A pipe without a PLL won't actually be able to drive bits from
1984 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
1987 if (HAS_GMCH_DISPLAY(dev_priv))
1988 if (crtc->config->has_dsi_encoder)
1989 assert_dsi_pll_enabled(dev_priv);
1991 assert_pll_enabled(dev_priv, pipe);
1993 if (crtc->config->has_pch_encoder) {
1994 /* if driving the PCH, we need FDI enabled */
1995 assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
1996 assert_fdi_tx_pll_enabled(dev_priv,
1997 (enum pipe) cpu_transcoder);
1999 /* FIXME: assert CPU port conditions for SNB+ */
2002 reg = PIPECONF(cpu_transcoder);
2003 val = I915_READ(reg);
2004 if (val & PIPECONF_ENABLE) {
2005 WARN_ON(!((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
2006 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)));
2010 I915_WRITE(reg, val | PIPECONF_ENABLE);
2014 * Until the pipe starts DSL will read as 0, which would cause
2015 * an apparent vblank timestamp jump, which messes up also the
2016 * frame count when it's derived from the timestamps. So let's
2017 * wait for the pipe to start properly before we call
2018 * drm_crtc_vblank_on()
2020 if (dev->max_vblank_count == 0 &&
2021 wait_for(intel_get_crtc_scanline(crtc) != crtc->scanline_offset, 50))
2022 DRM_ERROR("pipe %c didn't start\n", pipe_name(pipe));
2026 * intel_disable_pipe - disable a pipe, asserting requirements
2027 * @crtc: crtc whose pipes is to be disabled
2029 * Disable the pipe of @crtc, making sure that various hardware
2030 * specific requirements are met, if applicable, e.g. plane
2031 * disabled, panel fitter off, etc.
2033 * Will wait until the pipe has shut down before returning.
2035 static void intel_disable_pipe(struct intel_crtc *crtc)
2037 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
2038 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
2039 enum pipe pipe = crtc->pipe;
2043 DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe));
2046 * Make sure planes won't keep trying to pump pixels to us,
2047 * or we might hang the display.
2049 assert_planes_disabled(dev_priv, pipe);
2050 assert_cursor_disabled(dev_priv, pipe);
2051 assert_sprites_disabled(dev_priv, pipe);
2053 reg = PIPECONF(cpu_transcoder);
2054 val = I915_READ(reg);
2055 if ((val & PIPECONF_ENABLE) == 0)
2059 * Double wide has implications for planes
2060 * so best keep it disabled when not needed.
2062 if (crtc->config->double_wide)
2063 val &= ~PIPECONF_DOUBLE_WIDE;
2065 /* Don't disable pipe or pipe PLLs if needed */
2066 if (!(pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) &&
2067 !(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
2068 val &= ~PIPECONF_ENABLE;
2070 I915_WRITE(reg, val);
2071 if ((val & PIPECONF_ENABLE) == 0)
2072 intel_wait_for_pipe_off(crtc);
2075 static bool need_vtd_wa(struct drm_device *dev)
2077 #ifdef CONFIG_INTEL_IOMMU
2078 if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
2084 static unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
2086 return IS_GEN2(dev_priv) ? 2048 : 4096;
2089 static unsigned int intel_tile_width_bytes(const struct drm_i915_private *dev_priv,
2090 uint64_t fb_modifier, unsigned int cpp)
2092 switch (fb_modifier) {
2093 case DRM_FORMAT_MOD_NONE:
2095 case I915_FORMAT_MOD_X_TILED:
2096 if (IS_GEN2(dev_priv))
2100 case I915_FORMAT_MOD_Y_TILED:
2101 if (IS_GEN2(dev_priv) || HAS_128_BYTE_Y_TILING(dev_priv))
2105 case I915_FORMAT_MOD_Yf_TILED:
2121 MISSING_CASE(fb_modifier);
2126 unsigned int intel_tile_height(const struct drm_i915_private *dev_priv,
2127 uint64_t fb_modifier, unsigned int cpp)
2129 if (fb_modifier == DRM_FORMAT_MOD_NONE)
2132 return intel_tile_size(dev_priv) /
2133 intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
2136 /* Return the tile dimensions in pixel units */
2137 static void intel_tile_dims(const struct drm_i915_private *dev_priv,
2138 unsigned int *tile_width,
2139 unsigned int *tile_height,
2140 uint64_t fb_modifier,
2143 unsigned int tile_width_bytes =
2144 intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
2146 *tile_width = tile_width_bytes / cpp;
2147 *tile_height = intel_tile_size(dev_priv) / tile_width_bytes;
2151 intel_fb_align_height(struct drm_device *dev, unsigned int height,
2152 uint32_t pixel_format, uint64_t fb_modifier)
2154 unsigned int cpp = drm_format_plane_cpp(pixel_format, 0);
2155 unsigned int tile_height = intel_tile_height(to_i915(dev), fb_modifier, cpp);
2157 return ALIGN(height, tile_height);
2160 unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info)
2162 unsigned int size = 0;
2165 for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++)
2166 size += rot_info->plane[i].width * rot_info->plane[i].height;
2172 intel_fill_fb_ggtt_view(struct i915_ggtt_view *view,
2173 const struct drm_framebuffer *fb,
2174 unsigned int rotation)
2176 if (intel_rotation_90_or_270(rotation)) {
2177 *view = i915_ggtt_view_rotated;
2178 view->params.rotated = to_intel_framebuffer(fb)->rot_info;
2180 *view = i915_ggtt_view_normal;
2185 intel_fill_fb_info(struct drm_i915_private *dev_priv,
2186 struct drm_framebuffer *fb)
2188 struct intel_rotation_info *info = &to_intel_framebuffer(fb)->rot_info;
2189 unsigned int tile_size, tile_width, tile_height, cpp;
2191 tile_size = intel_tile_size(dev_priv);
2193 cpp = drm_format_plane_cpp(fb->pixel_format, 0);
2194 intel_tile_dims(dev_priv, &tile_width, &tile_height,
2195 fb->modifier[0], cpp);
2197 info->plane[0].width = DIV_ROUND_UP(fb->pitches[0], tile_width * cpp);
2198 info->plane[0].height = DIV_ROUND_UP(fb->height, tile_height);
2200 if (info->pixel_format == DRM_FORMAT_NV12) {
2201 cpp = drm_format_plane_cpp(fb->pixel_format, 1);
2202 intel_tile_dims(dev_priv, &tile_width, &tile_height,
2203 fb->modifier[1], cpp);
2205 info->uv_offset = fb->offsets[1];
2206 info->plane[1].width = DIV_ROUND_UP(fb->pitches[1], tile_width * cpp);
2207 info->plane[1].height = DIV_ROUND_UP(fb->height / 2, tile_height);
2211 static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_priv)
2213 if (INTEL_INFO(dev_priv)->gen >= 9)
2215 else if (IS_BROADWATER(dev_priv) || IS_CRESTLINE(dev_priv) ||
2216 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2218 else if (INTEL_INFO(dev_priv)->gen >= 4)
2224 static unsigned int intel_surf_alignment(const struct drm_i915_private *dev_priv,
2225 uint64_t fb_modifier)
2227 switch (fb_modifier) {
2228 case DRM_FORMAT_MOD_NONE:
2229 return intel_linear_alignment(dev_priv);
2230 case I915_FORMAT_MOD_X_TILED:
2231 if (INTEL_INFO(dev_priv)->gen >= 9)
2234 case I915_FORMAT_MOD_Y_TILED:
2235 case I915_FORMAT_MOD_Yf_TILED:
2236 return 1 * 1024 * 1024;
2238 MISSING_CASE(fb_modifier);
2244 intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,
2245 unsigned int rotation)
2247 struct drm_device *dev = fb->dev;
2248 struct drm_i915_private *dev_priv = dev->dev_private;
2249 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2250 struct i915_ggtt_view view;
2254 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
2256 alignment = intel_surf_alignment(dev_priv, fb->modifier[0]);
2258 intel_fill_fb_ggtt_view(&view, fb, rotation);
2260 /* Note that the w/a also requires 64 PTE of padding following the
2261 * bo. We currently fill all unused PTE with the shadow page and so
2262 * we should always have valid PTE following the scanout preventing
2265 if (need_vtd_wa(dev) && alignment < 256 * 1024)
2266 alignment = 256 * 1024;
2269 * Global gtt pte registers are special registers which actually forward
2270 * writes to a chunk of system memory. Which means that there is no risk
2271 * that the register values disappear as soon as we call
2272 * intel_runtime_pm_put(), so it is correct to wrap only the
2273 * pin/unpin/fence and not more.
2275 intel_runtime_pm_get(dev_priv);
2277 ret = i915_gem_object_pin_to_display_plane(obj, alignment,
2282 /* Install a fence for tiled scan-out. Pre-i965 always needs a
2283 * fence, whereas 965+ only requires a fence if using
2284 * framebuffer compression. For simplicity, we always install
2285 * a fence as the cost is not that onerous.
2287 if (view.type == I915_GGTT_VIEW_NORMAL) {
2288 ret = i915_gem_object_get_fence(obj);
2289 if (ret == -EDEADLK) {
2291 * -EDEADLK means there are no free fences
2294 * This is propagated to atomic, but it uses
2295 * -EDEADLK to force a locking recovery, so
2296 * change the returned error to -EBUSY.
2303 i915_gem_object_pin_fence(obj);
2306 intel_runtime_pm_put(dev_priv);
2310 i915_gem_object_unpin_from_display_plane(obj, &view);
2312 intel_runtime_pm_put(dev_priv);
2316 void intel_unpin_fb_obj(struct drm_framebuffer *fb, unsigned int rotation)
2318 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2319 struct i915_ggtt_view view;
2321 WARN_ON(!mutex_is_locked(&obj->base.dev->struct_mutex));
2323 intel_fill_fb_ggtt_view(&view, fb, rotation);
2325 if (view.type == I915_GGTT_VIEW_NORMAL)
2326 i915_gem_object_unpin_fence(obj);
2328 i915_gem_object_unpin_from_display_plane(obj, &view);
2332 * Adjust the tile offset by moving the difference into
2335 * Input tile dimensions and pitch must already be
2336 * rotated to match x and y, and in pixel units.
2338 static u32 intel_adjust_tile_offset(int *x, int *y,
2339 unsigned int tile_width,
2340 unsigned int tile_height,
2341 unsigned int tile_size,
2342 unsigned int pitch_tiles,
2348 WARN_ON(old_offset & (tile_size - 1));
2349 WARN_ON(new_offset & (tile_size - 1));
2350 WARN_ON(new_offset > old_offset);
2352 tiles = (old_offset - new_offset) / tile_size;
2354 *y += tiles / pitch_tiles * tile_height;
2355 *x += tiles % pitch_tiles * tile_width;
2361 * Computes the linear offset to the base tile and adjusts
2362 * x, y. bytes per pixel is assumed to be a power-of-two.
2364 * In the 90/270 rotated case, x and y are assumed
2365 * to be already rotated to match the rotated GTT view, and
2366 * pitch is the tile_height aligned framebuffer height.
2368 u32 intel_compute_tile_offset(int *x, int *y,
2369 const struct drm_framebuffer *fb, int plane,
2371 unsigned int rotation)
2373 const struct drm_i915_private *dev_priv = to_i915(fb->dev);
2374 uint64_t fb_modifier = fb->modifier[plane];
2375 unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
2376 u32 offset, offset_aligned, alignment;
2378 alignment = intel_surf_alignment(dev_priv, fb_modifier);
2382 if (fb_modifier != DRM_FORMAT_MOD_NONE) {
2383 unsigned int tile_size, tile_width, tile_height;
2384 unsigned int tile_rows, tiles, pitch_tiles;
2386 tile_size = intel_tile_size(dev_priv);
2387 intel_tile_dims(dev_priv, &tile_width, &tile_height,
2390 if (intel_rotation_90_or_270(rotation)) {
2391 pitch_tiles = pitch / tile_height;
2392 swap(tile_width, tile_height);
2394 pitch_tiles = pitch / (tile_width * cpp);
2397 tile_rows = *y / tile_height;
2400 tiles = *x / tile_width;
2403 offset = (tile_rows * pitch_tiles + tiles) * tile_size;
2404 offset_aligned = offset & ~alignment;
2406 intel_adjust_tile_offset(x, y, tile_width, tile_height,
2407 tile_size, pitch_tiles,
2408 offset, offset_aligned);
2410 offset = *y * pitch + *x * cpp;
2411 offset_aligned = offset & ~alignment;
2413 *y = (offset & alignment) / pitch;
2414 *x = ((offset & alignment) - *y * pitch) / cpp;
2417 return offset_aligned;
2420 static int i9xx_format_to_fourcc(int format)
2423 case DISPPLANE_8BPP:
2424 return DRM_FORMAT_C8;
2425 case DISPPLANE_BGRX555:
2426 return DRM_FORMAT_XRGB1555;
2427 case DISPPLANE_BGRX565:
2428 return DRM_FORMAT_RGB565;
2430 case DISPPLANE_BGRX888:
2431 return DRM_FORMAT_XRGB8888;
2432 case DISPPLANE_RGBX888:
2433 return DRM_FORMAT_XBGR8888;
2434 case DISPPLANE_BGRX101010:
2435 return DRM_FORMAT_XRGB2101010;
2436 case DISPPLANE_RGBX101010:
2437 return DRM_FORMAT_XBGR2101010;
2441 static int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
2444 case PLANE_CTL_FORMAT_RGB_565:
2445 return DRM_FORMAT_RGB565;
2447 case PLANE_CTL_FORMAT_XRGB_8888:
2450 return DRM_FORMAT_ABGR8888;
2452 return DRM_FORMAT_XBGR8888;
2455 return DRM_FORMAT_ARGB8888;
2457 return DRM_FORMAT_XRGB8888;
2459 case PLANE_CTL_FORMAT_XRGB_2101010:
2461 return DRM_FORMAT_XBGR2101010;
2463 return DRM_FORMAT_XRGB2101010;
2468 intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
2469 struct intel_initial_plane_config *plane_config)
2471 struct drm_device *dev = crtc->base.dev;
2472 struct drm_i915_private *dev_priv = to_i915(dev);
2473 struct i915_ggtt *ggtt = &dev_priv->ggtt;
2474 struct drm_i915_gem_object *obj = NULL;
2475 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
2476 struct drm_framebuffer *fb = &plane_config->fb->base;
2477 u32 base_aligned = round_down(plane_config->base, PAGE_SIZE);
2478 u32 size_aligned = round_up(plane_config->base + plane_config->size,
2481 size_aligned -= base_aligned;
2483 if (plane_config->size == 0)
2486 /* If the FB is too big, just don't use it since fbdev is not very
2487 * important and we should probably use that space with FBC or other
2489 if (size_aligned * 2 > ggtt->stolen_usable_size)
2492 mutex_lock(&dev->struct_mutex);
2494 obj = i915_gem_object_create_stolen_for_preallocated(dev,
2499 mutex_unlock(&dev->struct_mutex);
2503 obj->tiling_mode = plane_config->tiling;
2504 if (obj->tiling_mode == I915_TILING_X)
2505 obj->stride = fb->pitches[0];
2507 mode_cmd.pixel_format = fb->pixel_format;
2508 mode_cmd.width = fb->width;
2509 mode_cmd.height = fb->height;
2510 mode_cmd.pitches[0] = fb->pitches[0];
2511 mode_cmd.modifier[0] = fb->modifier[0];
2512 mode_cmd.flags = DRM_MODE_FB_MODIFIERS;
2514 if (intel_framebuffer_init(dev, to_intel_framebuffer(fb),
2516 DRM_DEBUG_KMS("intel fb init failed\n");
2520 mutex_unlock(&dev->struct_mutex);
2522 DRM_DEBUG_KMS("initial plane fb obj %p\n", obj);
2526 drm_gem_object_unreference(&obj->base);
2527 mutex_unlock(&dev->struct_mutex);
2531 /* Update plane->state->fb to match plane->fb after driver-internal updates */
2533 update_state_fb(struct drm_plane *plane)
2535 if (plane->fb == plane->state->fb)
2538 if (plane->state->fb)
2539 drm_framebuffer_unreference(plane->state->fb);
2540 plane->state->fb = plane->fb;
2541 if (plane->state->fb)
2542 drm_framebuffer_reference(plane->state->fb);
2546 intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
2547 struct intel_initial_plane_config *plane_config)
2549 struct drm_device *dev = intel_crtc->base.dev;
2550 struct drm_i915_private *dev_priv = dev->dev_private;
2552 struct intel_crtc *i;
2553 struct drm_i915_gem_object *obj;
2554 struct drm_plane *primary = intel_crtc->base.primary;
2555 struct drm_plane_state *plane_state = primary->state;
2556 struct drm_crtc_state *crtc_state = intel_crtc->base.state;
2557 struct intel_plane *intel_plane = to_intel_plane(primary);
2558 struct intel_plane_state *intel_state =
2559 to_intel_plane_state(plane_state);
2560 struct drm_framebuffer *fb;
2562 if (!plane_config->fb)
2565 if (intel_alloc_initial_plane_obj(intel_crtc, plane_config)) {
2566 fb = &plane_config->fb->base;
2570 kfree(plane_config->fb);
2573 * Failed to alloc the obj, check to see if we should share
2574 * an fb with another CRTC instead
2576 for_each_crtc(dev, c) {
2577 i = to_intel_crtc(c);
2579 if (c == &intel_crtc->base)
2585 fb = c->primary->fb;
2589 obj = intel_fb_obj(fb);
2590 if (i915_gem_obj_ggtt_offset(obj) == plane_config->base) {
2591 drm_framebuffer_reference(fb);
2597 * We've failed to reconstruct the BIOS FB. Current display state
2598 * indicates that the primary plane is visible, but has a NULL FB,
2599 * which will lead to problems later if we don't fix it up. The
2600 * simplest solution is to just disable the primary plane now and
2601 * pretend the BIOS never had it enabled.
2603 to_intel_plane_state(plane_state)->visible = false;
2604 crtc_state->plane_mask &= ~(1 << drm_plane_index(primary));
2605 intel_pre_disable_primary_noatomic(&intel_crtc->base);
2606 intel_plane->disable_plane(primary, &intel_crtc->base);
2611 plane_state->src_x = 0;
2612 plane_state->src_y = 0;
2613 plane_state->src_w = fb->width << 16;
2614 plane_state->src_h = fb->height << 16;
2616 plane_state->crtc_x = 0;
2617 plane_state->crtc_y = 0;
2618 plane_state->crtc_w = fb->width;
2619 plane_state->crtc_h = fb->height;
2621 intel_state->src.x1 = plane_state->src_x;
2622 intel_state->src.y1 = plane_state->src_y;
2623 intel_state->src.x2 = plane_state->src_x + plane_state->src_w;
2624 intel_state->src.y2 = plane_state->src_y + plane_state->src_h;
2625 intel_state->dst.x1 = plane_state->crtc_x;
2626 intel_state->dst.y1 = plane_state->crtc_y;
2627 intel_state->dst.x2 = plane_state->crtc_x + plane_state->crtc_w;
2628 intel_state->dst.y2 = plane_state->crtc_y + plane_state->crtc_h;
2630 obj = intel_fb_obj(fb);
2631 if (obj->tiling_mode != I915_TILING_NONE)
2632 dev_priv->preserve_bios_swizzle = true;
2634 drm_framebuffer_reference(fb);
2635 primary->fb = primary->state->fb = fb;
2636 primary->crtc = primary->state->crtc = &intel_crtc->base;
2637 intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
2638 obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bit;
2641 static void i9xx_update_primary_plane(struct drm_plane *primary,
2642 const struct intel_crtc_state *crtc_state,
2643 const struct intel_plane_state *plane_state)
2645 struct drm_device *dev = primary->dev;
2646 struct drm_i915_private *dev_priv = dev->dev_private;
2647 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
2648 struct drm_framebuffer *fb = plane_state->base.fb;
2649 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2650 int plane = intel_crtc->plane;
2653 i915_reg_t reg = DSPCNTR(plane);
2654 unsigned int rotation = plane_state->base.rotation;
2655 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
2656 int x = plane_state->src.x1 >> 16;
2657 int y = plane_state->src.y1 >> 16;
2659 dspcntr = DISPPLANE_GAMMA_ENABLE;
2661 dspcntr |= DISPLAY_PLANE_ENABLE;
2663 if (INTEL_INFO(dev)->gen < 4) {
2664 if (intel_crtc->pipe == PIPE_B)
2665 dspcntr |= DISPPLANE_SEL_PIPE_B;
2667 /* pipesrc and dspsize control the size that is scaled from,
2668 * which should always be the user's requested size.
2670 I915_WRITE(DSPSIZE(plane),
2671 ((crtc_state->pipe_src_h - 1) << 16) |
2672 (crtc_state->pipe_src_w - 1));
2673 I915_WRITE(DSPPOS(plane), 0);
2674 } else if (IS_CHERRYVIEW(dev) && plane == PLANE_B) {
2675 I915_WRITE(PRIMSIZE(plane),
2676 ((crtc_state->pipe_src_h - 1) << 16) |
2677 (crtc_state->pipe_src_w - 1));
2678 I915_WRITE(PRIMPOS(plane), 0);
2679 I915_WRITE(PRIMCNSTALPHA(plane), 0);
2682 switch (fb->pixel_format) {
2684 dspcntr |= DISPPLANE_8BPP;
2686 case DRM_FORMAT_XRGB1555:
2687 dspcntr |= DISPPLANE_BGRX555;
2689 case DRM_FORMAT_RGB565:
2690 dspcntr |= DISPPLANE_BGRX565;
2692 case DRM_FORMAT_XRGB8888:
2693 dspcntr |= DISPPLANE_BGRX888;
2695 case DRM_FORMAT_XBGR8888:
2696 dspcntr |= DISPPLANE_RGBX888;
2698 case DRM_FORMAT_XRGB2101010:
2699 dspcntr |= DISPPLANE_BGRX101010;
2701 case DRM_FORMAT_XBGR2101010:
2702 dspcntr |= DISPPLANE_RGBX101010;
2708 if (INTEL_INFO(dev)->gen >= 4 &&
2709 obj->tiling_mode != I915_TILING_NONE)
2710 dspcntr |= DISPPLANE_TILED;
2713 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2715 linear_offset = y * fb->pitches[0] + x * cpp;
2717 if (INTEL_INFO(dev)->gen >= 4) {
2718 intel_crtc->dspaddr_offset =
2719 intel_compute_tile_offset(&x, &y, fb, 0,
2720 fb->pitches[0], rotation);
2721 linear_offset -= intel_crtc->dspaddr_offset;
2723 intel_crtc->dspaddr_offset = linear_offset;
2726 if (rotation == BIT(DRM_ROTATE_180)) {
2727 dspcntr |= DISPPLANE_ROTATE_180;
2729 x += (crtc_state->pipe_src_w - 1);
2730 y += (crtc_state->pipe_src_h - 1);
2732 /* Finding the last pixel of the last line of the display
2733 data and adding to linear_offset*/
2735 (crtc_state->pipe_src_h - 1) * fb->pitches[0] +
2736 (crtc_state->pipe_src_w - 1) * cpp;
2739 intel_crtc->adjusted_x = x;
2740 intel_crtc->adjusted_y = y;
2742 I915_WRITE(reg, dspcntr);
2744 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2745 if (INTEL_INFO(dev)->gen >= 4) {
2746 I915_WRITE(DSPSURF(plane),
2747 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2748 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2749 I915_WRITE(DSPLINOFF(plane), linear_offset);
2751 I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
2755 static void i9xx_disable_primary_plane(struct drm_plane *primary,
2756 struct drm_crtc *crtc)
2758 struct drm_device *dev = crtc->dev;
2759 struct drm_i915_private *dev_priv = dev->dev_private;
2760 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2761 int plane = intel_crtc->plane;
2763 I915_WRITE(DSPCNTR(plane), 0);
2764 if (INTEL_INFO(dev_priv)->gen >= 4)
2765 I915_WRITE(DSPSURF(plane), 0);
2767 I915_WRITE(DSPADDR(plane), 0);
2768 POSTING_READ(DSPCNTR(plane));
2771 static void ironlake_update_primary_plane(struct drm_plane *primary,
2772 const struct intel_crtc_state *crtc_state,
2773 const struct intel_plane_state *plane_state)
2775 struct drm_device *dev = primary->dev;
2776 struct drm_i915_private *dev_priv = dev->dev_private;
2777 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
2778 struct drm_framebuffer *fb = plane_state->base.fb;
2779 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2780 int plane = intel_crtc->plane;
2783 i915_reg_t reg = DSPCNTR(plane);
2784 unsigned int rotation = plane_state->base.rotation;
2785 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
2786 int x = plane_state->src.x1 >> 16;
2787 int y = plane_state->src.y1 >> 16;
2789 dspcntr = DISPPLANE_GAMMA_ENABLE;
2790 dspcntr |= DISPLAY_PLANE_ENABLE;
2792 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
2793 dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;
2795 switch (fb->pixel_format) {
2797 dspcntr |= DISPPLANE_8BPP;
2799 case DRM_FORMAT_RGB565:
2800 dspcntr |= DISPPLANE_BGRX565;
2802 case DRM_FORMAT_XRGB8888:
2803 dspcntr |= DISPPLANE_BGRX888;
2805 case DRM_FORMAT_XBGR8888:
2806 dspcntr |= DISPPLANE_RGBX888;
2808 case DRM_FORMAT_XRGB2101010:
2809 dspcntr |= DISPPLANE_BGRX101010;
2811 case DRM_FORMAT_XBGR2101010:
2812 dspcntr |= DISPPLANE_RGBX101010;
2818 if (obj->tiling_mode != I915_TILING_NONE)
2819 dspcntr |= DISPPLANE_TILED;
2821 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
2822 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2824 linear_offset = y * fb->pitches[0] + x * cpp;
2825 intel_crtc->dspaddr_offset =
2826 intel_compute_tile_offset(&x, &y, fb, 0,
2827 fb->pitches[0], rotation);
2828 linear_offset -= intel_crtc->dspaddr_offset;
2829 if (rotation == BIT(DRM_ROTATE_180)) {
2830 dspcntr |= DISPPLANE_ROTATE_180;
2832 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
2833 x += (crtc_state->pipe_src_w - 1);
2834 y += (crtc_state->pipe_src_h - 1);
2836 /* Finding the last pixel of the last line of the display
2837 data and adding to linear_offset*/
2839 (crtc_state->pipe_src_h - 1) * fb->pitches[0] +
2840 (crtc_state->pipe_src_w - 1) * cpp;
2844 intel_crtc->adjusted_x = x;
2845 intel_crtc->adjusted_y = y;
2847 I915_WRITE(reg, dspcntr);
2849 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2850 I915_WRITE(DSPSURF(plane),
2851 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2852 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
2853 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2855 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2856 I915_WRITE(DSPLINOFF(plane), linear_offset);
2861 u32 intel_fb_stride_alignment(const struct drm_i915_private *dev_priv,
2862 uint64_t fb_modifier, uint32_t pixel_format)
2864 if (fb_modifier == DRM_FORMAT_MOD_NONE) {
2867 int cpp = drm_format_plane_cpp(pixel_format, 0);
2869 return intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
2873 u32 intel_plane_obj_offset(struct intel_plane *intel_plane,
2874 struct drm_i915_gem_object *obj,
2877 struct i915_ggtt_view view;
2878 struct i915_vma *vma;
2881 intel_fill_fb_ggtt_view(&view, intel_plane->base.state->fb,
2882 intel_plane->base.state->rotation);
2884 vma = i915_gem_obj_to_ggtt_view(obj, &view);
2885 if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n",
2889 offset = vma->node.start;
2892 offset += vma->ggtt_view.params.rotated.uv_start_page *
2896 WARN_ON(upper_32_bits(offset));
2898 return lower_32_bits(offset);
2901 static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
2903 struct drm_device *dev = intel_crtc->base.dev;
2904 struct drm_i915_private *dev_priv = dev->dev_private;
2906 I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
2907 I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
2908 I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
2912 * This function detaches (aka. unbinds) unused scalers in hardware
2914 static void skl_detach_scalers(struct intel_crtc *intel_crtc)
2916 struct intel_crtc_scaler_state *scaler_state;
2919 scaler_state = &intel_crtc->config->scaler_state;
2921 /* loop through and disable scalers that aren't in use */
2922 for (i = 0; i < intel_crtc->num_scalers; i++) {
2923 if (!scaler_state->scalers[i].in_use)
2924 skl_detach_scaler(intel_crtc, i);
2928 u32 skl_plane_ctl_format(uint32_t pixel_format)
2930 switch (pixel_format) {
2932 return PLANE_CTL_FORMAT_INDEXED;
2933 case DRM_FORMAT_RGB565:
2934 return PLANE_CTL_FORMAT_RGB_565;
2935 case DRM_FORMAT_XBGR8888:
2936 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
2937 case DRM_FORMAT_XRGB8888:
2938 return PLANE_CTL_FORMAT_XRGB_8888;
2940 * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
2941 * to be already pre-multiplied. We need to add a knob (or a different
2942 * DRM_FORMAT) for user-space to configure that.
2944 case DRM_FORMAT_ABGR8888:
2945 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX |
2946 PLANE_CTL_ALPHA_SW_PREMULTIPLY;
2947 case DRM_FORMAT_ARGB8888:
2948 return PLANE_CTL_FORMAT_XRGB_8888 |
2949 PLANE_CTL_ALPHA_SW_PREMULTIPLY;
2950 case DRM_FORMAT_XRGB2101010:
2951 return PLANE_CTL_FORMAT_XRGB_2101010;
2952 case DRM_FORMAT_XBGR2101010:
2953 return PLANE_CTL_ORDER_RGBX | PLANE_CTL_FORMAT_XRGB_2101010;
2954 case DRM_FORMAT_YUYV:
2955 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
2956 case DRM_FORMAT_YVYU:
2957 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
2958 case DRM_FORMAT_UYVY:
2959 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
2960 case DRM_FORMAT_VYUY:
2961 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
2963 MISSING_CASE(pixel_format);
2969 u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
2971 switch (fb_modifier) {
2972 case DRM_FORMAT_MOD_NONE:
2974 case I915_FORMAT_MOD_X_TILED:
2975 return PLANE_CTL_TILED_X;
2976 case I915_FORMAT_MOD_Y_TILED:
2977 return PLANE_CTL_TILED_Y;
2978 case I915_FORMAT_MOD_Yf_TILED:
2979 return PLANE_CTL_TILED_YF;
2981 MISSING_CASE(fb_modifier);
2987 u32 skl_plane_ctl_rotation(unsigned int rotation)
2990 case BIT(DRM_ROTATE_0):
2993 * DRM_ROTATE_ is counter clockwise to stay compatible with Xrandr
2994 * while i915 HW rotation is clockwise, thats why this swapping.
2996 case BIT(DRM_ROTATE_90):
2997 return PLANE_CTL_ROTATE_270;
2998 case BIT(DRM_ROTATE_180):
2999 return PLANE_CTL_ROTATE_180;
3000 case BIT(DRM_ROTATE_270):
3001 return PLANE_CTL_ROTATE_90;
3003 MISSING_CASE(rotation);
3009 static void skylake_update_primary_plane(struct drm_plane *plane,
3010 const struct intel_crtc_state *crtc_state,
3011 const struct intel_plane_state *plane_state)
3013 struct drm_device *dev = plane->dev;
3014 struct drm_i915_private *dev_priv = dev->dev_private;
3015 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
3016 struct drm_framebuffer *fb = plane_state->base.fb;
3017 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
3018 int pipe = intel_crtc->pipe;
3019 u32 plane_ctl, stride_div, stride;
3020 u32 tile_height, plane_offset, plane_size;
3021 unsigned int rotation = plane_state->base.rotation;
3022 int x_offset, y_offset;
3024 int scaler_id = plane_state->scaler_id;
3025 int src_x = plane_state->src.x1 >> 16;
3026 int src_y = plane_state->src.y1 >> 16;
3027 int src_w = drm_rect_width(&plane_state->src) >> 16;
3028 int src_h = drm_rect_height(&plane_state->src) >> 16;
3029 int dst_x = plane_state->dst.x1;
3030 int dst_y = plane_state->dst.y1;
3031 int dst_w = drm_rect_width(&plane_state->dst);
3032 int dst_h = drm_rect_height(&plane_state->dst);
3034 plane_ctl = PLANE_CTL_ENABLE |
3035 PLANE_CTL_PIPE_GAMMA_ENABLE |
3036 PLANE_CTL_PIPE_CSC_ENABLE;
3038 plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
3039 plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
3040 plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
3041 plane_ctl |= skl_plane_ctl_rotation(rotation);
3043 stride_div = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
3045 surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj, 0);
3047 WARN_ON(drm_rect_width(&plane_state->src) == 0);
3049 if (intel_rotation_90_or_270(rotation)) {
3050 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
3052 /* stride = Surface height in tiles */
3053 tile_height = intel_tile_height(dev_priv, fb->modifier[0], cpp);
3054 stride = DIV_ROUND_UP(fb->height, tile_height);
3055 x_offset = stride * tile_height - src_y - src_h;
3057 plane_size = (src_w - 1) << 16 | (src_h - 1);
3059 stride = fb->pitches[0] / stride_div;
3062 plane_size = (src_h - 1) << 16 | (src_w - 1);
3064 plane_offset = y_offset << 16 | x_offset;
3066 intel_crtc->adjusted_x = x_offset;
3067 intel_crtc->adjusted_y = y_offset;
3069 I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
3070 I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
3071 I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
3072 I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
3074 if (scaler_id >= 0) {
3075 uint32_t ps_ctrl = 0;
3077 WARN_ON(!dst_w || !dst_h);
3078 ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
3079 crtc_state->scaler_state.scalers[scaler_id].mode;
3080 I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
3081 I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
3082 I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) | dst_y);
3083 I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) | dst_h);
3084 I915_WRITE(PLANE_POS(pipe, 0), 0);
3086 I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
3089 I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
3091 POSTING_READ(PLANE_SURF(pipe, 0));
3094 static void skylake_disable_primary_plane(struct drm_plane *primary,
3095 struct drm_crtc *crtc)
3097 struct drm_device *dev = crtc->dev;
3098 struct drm_i915_private *dev_priv = dev->dev_private;
3099 int pipe = to_intel_crtc(crtc)->pipe;
3101 I915_WRITE(PLANE_CTL(pipe, 0), 0);
3102 I915_WRITE(PLANE_SURF(pipe, 0), 0);
3103 POSTING_READ(PLANE_SURF(pipe, 0));
3106 /* Assume fb object is pinned & idle & fenced and just update base pointers */
3108 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
3109 int x, int y, enum mode_set_atomic state)
3111 /* Support for kgdboc is disabled, this needs a major rework. */
3112 DRM_ERROR("legacy panic handler not supported any more.\n");
3117 static void intel_complete_page_flips(struct drm_i915_private *dev_priv)
3119 struct intel_crtc *crtc;
3121 for_each_intel_crtc(dev_priv->dev, crtc)
3122 intel_finish_page_flip_cs(dev_priv, crtc->pipe);
3125 static void intel_update_primary_planes(struct drm_device *dev)
3127 struct drm_crtc *crtc;
3129 for_each_crtc(dev, crtc) {
3130 struct intel_plane *plane = to_intel_plane(crtc->primary);
3131 struct intel_plane_state *plane_state;
3133 drm_modeset_lock_crtc(crtc, &plane->base);
3134 plane_state = to_intel_plane_state(plane->base.state);
3136 if (plane_state->visible)
3137 plane->update_plane(&plane->base,
3138 to_intel_crtc_state(crtc->state),
3141 drm_modeset_unlock_crtc(crtc);
3145 void intel_prepare_reset(struct drm_i915_private *dev_priv)
3147 /* no reset support for gen2 */
3148 if (IS_GEN2(dev_priv))
3151 /* reset doesn't touch the display */
3152 if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
3155 drm_modeset_lock_all(dev_priv->dev);
3157 * Disabling the crtcs gracefully seems nicer. Also the
3158 * g33 docs say we should at least disable all the planes.
3160 intel_display_suspend(dev_priv->dev);
3163 void intel_finish_reset(struct drm_i915_private *dev_priv)
3166 * Flips in the rings will be nuked by the reset,
3167 * so complete all pending flips so that user space
3168 * will get its events and not get stuck.
3170 intel_complete_page_flips(dev_priv);
3172 /* no reset support for gen2 */
3173 if (IS_GEN2(dev_priv))
3176 /* reset doesn't touch the display */
3177 if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv)) {
3179 * Flips in the rings have been nuked by the reset,
3180 * so update the base address of all primary
3181 * planes to the the last fb to make sure we're
3182 * showing the correct fb after a reset.
3184 * FIXME: Atomic will make this obsolete since we won't schedule
3185 * CS-based flips (which might get lost in gpu resets) any more.
3187 intel_update_primary_planes(dev_priv->dev);
3192 * The display has been reset as well,
3193 * so need a full re-initialization.
3195 intel_runtime_pm_disable_interrupts(dev_priv);
3196 intel_runtime_pm_enable_interrupts(dev_priv);
3198 intel_modeset_init_hw(dev_priv->dev);
3200 spin_lock_irq(&dev_priv->irq_lock);
3201 if (dev_priv->display.hpd_irq_setup)
3202 dev_priv->display.hpd_irq_setup(dev_priv);
3203 spin_unlock_irq(&dev_priv->irq_lock);
3205 intel_display_resume(dev_priv->dev);
3207 intel_hpd_init(dev_priv);
3209 drm_modeset_unlock_all(dev_priv->dev);
3212 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
3214 struct drm_device *dev = crtc->dev;
3215 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3216 unsigned reset_counter;
3219 reset_counter = i915_reset_counter(&to_i915(dev)->gpu_error);
3220 if (intel_crtc->reset_counter != reset_counter)
3223 spin_lock_irq(&dev->event_lock);
3224 pending = to_intel_crtc(crtc)->flip_work != NULL;
3225 spin_unlock_irq(&dev->event_lock);
3230 static void intel_update_pipe_config(struct intel_crtc *crtc,
3231 struct intel_crtc_state *old_crtc_state)
3233 struct drm_device *dev = crtc->base.dev;
3234 struct drm_i915_private *dev_priv = dev->dev_private;
3235 struct intel_crtc_state *pipe_config =
3236 to_intel_crtc_state(crtc->base.state);
3238 /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
3239 crtc->base.mode = crtc->base.state->mode;
3241 DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
3242 old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
3243 pipe_config->pipe_src_w, pipe_config->pipe_src_h);
3246 * Update pipe size and adjust fitter if needed: the reason for this is
3247 * that in compute_mode_changes we check the native mode (not the pfit
3248 * mode) to see if we can flip rather than do a full mode set. In the
3249 * fastboot case, we'll flip, but if we don't update the pipesrc and
3250 * pfit state, we'll end up with a big fb scanned out into the wrong
3254 I915_WRITE(PIPESRC(crtc->pipe),
3255 ((pipe_config->pipe_src_w - 1) << 16) |
3256 (pipe_config->pipe_src_h - 1));
3258 /* on skylake this is done by detaching scalers */
3259 if (INTEL_INFO(dev)->gen >= 9) {
3260 skl_detach_scalers(crtc);
3262 if (pipe_config->pch_pfit.enabled)
3263 skylake_pfit_enable(crtc);
3264 } else if (HAS_PCH_SPLIT(dev)) {
3265 if (pipe_config->pch_pfit.enabled)
3266 ironlake_pfit_enable(crtc);
3267 else if (old_crtc_state->pch_pfit.enabled)
3268 ironlake_pfit_disable(crtc, true);
3272 static void intel_fdi_normal_train(struct drm_crtc *crtc)
3274 struct drm_device *dev = crtc->dev;
3275 struct drm_i915_private *dev_priv = dev->dev_private;
3276 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3277 int pipe = intel_crtc->pipe;
3281 /* enable normal train */
3282 reg = FDI_TX_CTL(pipe);
3283 temp = I915_READ(reg);
3284 if (IS_IVYBRIDGE(dev)) {
3285 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
3286 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
3288 temp &= ~FDI_LINK_TRAIN_NONE;
3289 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
3291 I915_WRITE(reg, temp);
3293 reg = FDI_RX_CTL(pipe);
3294 temp = I915_READ(reg);
3295 if (HAS_PCH_CPT(dev)) {
3296 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3297 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
3299 temp &= ~FDI_LINK_TRAIN_NONE;
3300 temp |= FDI_LINK_TRAIN_NONE;
3302 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
3304 /* wait one idle pattern time */
3308 /* IVB wants error correction enabled */
3309 if (IS_IVYBRIDGE(dev))
3310 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
3311 FDI_FE_ERRC_ENABLE);
3314 /* The FDI link training functions for ILK/Ibexpeak. */
3315 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
3317 struct drm_device *dev = crtc->dev;
3318 struct drm_i915_private *dev_priv = dev->dev_private;
3319 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3320 int pipe = intel_crtc->pipe;
3324 /* FDI needs bits from pipe first */
3325 assert_pipe_enabled(dev_priv, pipe);
3327 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3329 reg = FDI_RX_IMR(pipe);
3330 temp = I915_READ(reg);
3331 temp &= ~FDI_RX_SYMBOL_LOCK;
3332 temp &= ~FDI_RX_BIT_LOCK;
3333 I915_WRITE(reg, temp);
3337 /* enable CPU FDI TX and PCH FDI RX */
3338 reg = FDI_TX_CTL(pipe);
3339 temp = I915_READ(reg);
3340 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3341 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3342 temp &= ~FDI_LINK_TRAIN_NONE;
3343 temp |= FDI_LINK_TRAIN_PATTERN_1;
3344 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3346 reg = FDI_RX_CTL(pipe);
3347 temp = I915_READ(reg);
3348 temp &= ~FDI_LINK_TRAIN_NONE;
3349 temp |= FDI_LINK_TRAIN_PATTERN_1;
3350 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3355 /* Ironlake workaround, enable clock pointer after FDI enable*/
3356 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3357 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
3358 FDI_RX_PHASE_SYNC_POINTER_EN);
3360 reg = FDI_RX_IIR(pipe);
3361 for (tries = 0; tries < 5; tries++) {
3362 temp = I915_READ(reg);
3363 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3365 if ((temp & FDI_RX_BIT_LOCK)) {
3366 DRM_DEBUG_KMS("FDI train 1 done.\n");
3367 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3372 DRM_ERROR("FDI train 1 fail!\n");
3375 reg = FDI_TX_CTL(pipe);
3376 temp = I915_READ(reg);
3377 temp &= ~FDI_LINK_TRAIN_NONE;
3378 temp |= FDI_LINK_TRAIN_PATTERN_2;
3379 I915_WRITE(reg, temp);
3381 reg = FDI_RX_CTL(pipe);
3382 temp = I915_READ(reg);
3383 temp &= ~FDI_LINK_TRAIN_NONE;
3384 temp |= FDI_LINK_TRAIN_PATTERN_2;
3385 I915_WRITE(reg, temp);
3390 reg = FDI_RX_IIR(pipe);
3391 for (tries = 0; tries < 5; tries++) {
3392 temp = I915_READ(reg);
3393 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3395 if (temp & FDI_RX_SYMBOL_LOCK) {
3396 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3397 DRM_DEBUG_KMS("FDI train 2 done.\n");
3402 DRM_ERROR("FDI train 2 fail!\n");
3404 DRM_DEBUG_KMS("FDI train done\n");
3408 static const int snb_b_fdi_train_param[] = {
3409 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
3410 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
3411 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
3412 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
3415 /* The FDI link training functions for SNB/Cougarpoint. */
3416 static void gen6_fdi_link_train(struct drm_crtc *crtc)
3418 struct drm_device *dev = crtc->dev;
3419 struct drm_i915_private *dev_priv = dev->dev_private;
3420 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3421 int pipe = intel_crtc->pipe;
3425 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3427 reg = FDI_RX_IMR(pipe);
3428 temp = I915_READ(reg);
3429 temp &= ~FDI_RX_SYMBOL_LOCK;
3430 temp &= ~FDI_RX_BIT_LOCK;
3431 I915_WRITE(reg, temp);
3436 /* enable CPU FDI TX and PCH FDI RX */
3437 reg = FDI_TX_CTL(pipe);
3438 temp = I915_READ(reg);
3439 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3440 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3441 temp &= ~FDI_LINK_TRAIN_NONE;
3442 temp |= FDI_LINK_TRAIN_PATTERN_1;
3443 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3445 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3446 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3448 I915_WRITE(FDI_RX_MISC(pipe),
3449 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3451 reg = FDI_RX_CTL(pipe);
3452 temp = I915_READ(reg);
3453 if (HAS_PCH_CPT(dev)) {
3454 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3455 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3457 temp &= ~FDI_LINK_TRAIN_NONE;
3458 temp |= FDI_LINK_TRAIN_PATTERN_1;
3460 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3465 for (i = 0; i < 4; i++) {
3466 reg = FDI_TX_CTL(pipe);
3467 temp = I915_READ(reg);
3468 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3469 temp |= snb_b_fdi_train_param[i];
3470 I915_WRITE(reg, temp);
3475 for (retry = 0; retry < 5; retry++) {
3476 reg = FDI_RX_IIR(pipe);
3477 temp = I915_READ(reg);
3478 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3479 if (temp & FDI_RX_BIT_LOCK) {
3480 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3481 DRM_DEBUG_KMS("FDI train 1 done.\n");
3490 DRM_ERROR("FDI train 1 fail!\n");
3493 reg = FDI_TX_CTL(pipe);
3494 temp = I915_READ(reg);
3495 temp &= ~FDI_LINK_TRAIN_NONE;
3496 temp |= FDI_LINK_TRAIN_PATTERN_2;
3498 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3500 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3502 I915_WRITE(reg, temp);
3504 reg = FDI_RX_CTL(pipe);
3505 temp = I915_READ(reg);
3506 if (HAS_PCH_CPT(dev)) {
3507 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3508 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3510 temp &= ~FDI_LINK_TRAIN_NONE;
3511 temp |= FDI_LINK_TRAIN_PATTERN_2;
3513 I915_WRITE(reg, temp);
3518 for (i = 0; i < 4; i++) {
3519 reg = FDI_TX_CTL(pipe);
3520 temp = I915_READ(reg);
3521 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3522 temp |= snb_b_fdi_train_param[i];
3523 I915_WRITE(reg, temp);
3528 for (retry = 0; retry < 5; retry++) {
3529 reg = FDI_RX_IIR(pipe);
3530 temp = I915_READ(reg);
3531 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3532 if (temp & FDI_RX_SYMBOL_LOCK) {
3533 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3534 DRM_DEBUG_KMS("FDI train 2 done.\n");
3543 DRM_ERROR("FDI train 2 fail!\n");
3545 DRM_DEBUG_KMS("FDI train done.\n");
3548 /* Manual link training for Ivy Bridge A0 parts */
3549 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
3551 struct drm_device *dev = crtc->dev;
3552 struct drm_i915_private *dev_priv = dev->dev_private;
3553 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3554 int pipe = intel_crtc->pipe;
3558 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3560 reg = FDI_RX_IMR(pipe);
3561 temp = I915_READ(reg);
3562 temp &= ~FDI_RX_SYMBOL_LOCK;
3563 temp &= ~FDI_RX_BIT_LOCK;
3564 I915_WRITE(reg, temp);
3569 DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
3570 I915_READ(FDI_RX_IIR(pipe)));
3572 /* Try each vswing and preemphasis setting twice before moving on */
3573 for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
3574 /* disable first in case we need to retry */
3575 reg = FDI_TX_CTL(pipe);
3576 temp = I915_READ(reg);
3577 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
3578 temp &= ~FDI_TX_ENABLE;
3579 I915_WRITE(reg, temp);
3581 reg = FDI_RX_CTL(pipe);
3582 temp = I915_READ(reg);
3583 temp &= ~FDI_LINK_TRAIN_AUTO;
3584 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3585 temp &= ~FDI_RX_ENABLE;
3586 I915_WRITE(reg, temp);
3588 /* enable CPU FDI TX and PCH FDI RX */
3589 reg = FDI_TX_CTL(pipe);
3590 temp = I915_READ(reg);
3591 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3592 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3593 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
3594 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3595 temp |= snb_b_fdi_train_param[j/2];
3596 temp |= FDI_COMPOSITE_SYNC;
3597 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3599 I915_WRITE(FDI_RX_MISC(pipe),
3600 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3602 reg = FDI_RX_CTL(pipe);
3603 temp = I915_READ(reg);
3604 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3605 temp |= FDI_COMPOSITE_SYNC;
3606 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3609 udelay(1); /* should be 0.5us */
3611 for (i = 0; i < 4; i++) {
3612 reg = FDI_RX_IIR(pipe);
3613 temp = I915_READ(reg);
3614 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3616 if (temp & FDI_RX_BIT_LOCK ||
3617 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
3618 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3619 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
3623 udelay(1); /* should be 0.5us */
3626 DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
3631 reg = FDI_TX_CTL(pipe);
3632 temp = I915_READ(reg);
3633 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
3634 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
3635 I915_WRITE(reg, temp);
3637 reg = FDI_RX_CTL(pipe);
3638 temp = I915_READ(reg);
3639 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3640 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3641 I915_WRITE(reg, temp);
3644 udelay(2); /* should be 1.5us */
3646 for (i = 0; i < 4; i++) {
3647 reg = FDI_RX_IIR(pipe);
3648 temp = I915_READ(reg);
3649 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3651 if (temp & FDI_RX_SYMBOL_LOCK ||
3652 (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
3653 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3654 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
3658 udelay(2); /* should be 1.5us */
3661 DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
3665 DRM_DEBUG_KMS("FDI train done.\n");
3668 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
3670 struct drm_device *dev = intel_crtc->base.dev;
3671 struct drm_i915_private *dev_priv = dev->dev_private;
3672 int pipe = intel_crtc->pipe;
3676 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
3677 reg = FDI_RX_CTL(pipe);
3678 temp = I915_READ(reg);
3679 temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
3680 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3681 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3682 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
3687 /* Switch from Rawclk to PCDclk */
3688 temp = I915_READ(reg);
3689 I915_WRITE(reg, temp | FDI_PCDCLK);
3694 /* Enable CPU FDI TX PLL, always on for Ironlake */
3695 reg = FDI_TX_CTL(pipe);
3696 temp = I915_READ(reg);
3697 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
3698 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
3705 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
3707 struct drm_device *dev = intel_crtc->base.dev;
3708 struct drm_i915_private *dev_priv = dev->dev_private;
3709 int pipe = intel_crtc->pipe;
3713 /* Switch from PCDclk to Rawclk */
3714 reg = FDI_RX_CTL(pipe);
3715 temp = I915_READ(reg);
3716 I915_WRITE(reg, temp & ~FDI_PCDCLK);
3718 /* Disable CPU FDI TX PLL */
3719 reg = FDI_TX_CTL(pipe);
3720 temp = I915_READ(reg);
3721 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
3726 reg = FDI_RX_CTL(pipe);
3727 temp = I915_READ(reg);
3728 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
3730 /* Wait for the clocks to turn off. */
3735 static void ironlake_fdi_disable(struct drm_crtc *crtc)
3737 struct drm_device *dev = crtc->dev;
3738 struct drm_i915_private *dev_priv = dev->dev_private;
3739 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3740 int pipe = intel_crtc->pipe;
3744 /* disable CPU FDI tx and PCH FDI rx */
3745 reg = FDI_TX_CTL(pipe);
3746 temp = I915_READ(reg);
3747 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
3750 reg = FDI_RX_CTL(pipe);
3751 temp = I915_READ(reg);
3752 temp &= ~(0x7 << 16);
3753 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3754 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
3759 /* Ironlake workaround, disable clock pointer after downing FDI */
3760 if (HAS_PCH_IBX(dev))
3761 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3763 /* still set train pattern 1 */
3764 reg = FDI_TX_CTL(pipe);
3765 temp = I915_READ(reg);
3766 temp &= ~FDI_LINK_TRAIN_NONE;
3767 temp |= FDI_LINK_TRAIN_PATTERN_1;
3768 I915_WRITE(reg, temp);
3770 reg = FDI_RX_CTL(pipe);
3771 temp = I915_READ(reg);
3772 if (HAS_PCH_CPT(dev)) {
3773 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3774 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3776 temp &= ~FDI_LINK_TRAIN_NONE;
3777 temp |= FDI_LINK_TRAIN_PATTERN_1;
3779 /* BPC in FDI rx is consistent with that in PIPECONF */
3780 temp &= ~(0x07 << 16);
3781 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3782 I915_WRITE(reg, temp);
3788 bool intel_has_pending_fb_unpin(struct drm_device *dev)
3790 struct intel_crtc *crtc;
3792 /* Note that we don't need to be called with mode_config.lock here
3793 * as our list of CRTC objects is static for the lifetime of the
3794 * device and so cannot disappear as we iterate. Similarly, we can
3795 * happily treat the predicates as racy, atomic checks as userspace
3796 * cannot claim and pin a new fb without at least acquring the
3797 * struct_mutex and so serialising with us.
3799 for_each_intel_crtc(dev, crtc) {
3800 if (atomic_read(&crtc->unpin_work_count) == 0)
3803 if (crtc->flip_work)
3804 intel_wait_for_vblank(dev, crtc->pipe);
3812 static void page_flip_completed(struct intel_crtc *intel_crtc)
3814 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
3815 struct intel_flip_work *work = intel_crtc->flip_work;
3817 intel_crtc->flip_work = NULL;
3820 drm_crtc_send_vblank_event(&intel_crtc->base, work->event);
3822 drm_crtc_vblank_put(&intel_crtc->base);
3824 wake_up_all(&dev_priv->pending_flip_queue);
3825 queue_work(dev_priv->wq, &work->unpin_work);
3827 trace_i915_flip_complete(intel_crtc->plane,
3828 work->pending_flip_obj);
3831 static int intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
3833 struct drm_device *dev = crtc->dev;
3834 struct drm_i915_private *dev_priv = dev->dev_private;
3837 WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
3839 ret = wait_event_interruptible_timeout(
3840 dev_priv->pending_flip_queue,
3841 !intel_crtc_has_pending_flip(crtc),
3848 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3849 struct intel_flip_work *work;
3851 spin_lock_irq(&dev->event_lock);
3852 work = intel_crtc->flip_work;
3853 if (work && !is_mmio_work(work)) {
3854 WARN_ONCE(1, "Removing stuck page flip\n");
3855 page_flip_completed(intel_crtc);
3857 spin_unlock_irq(&dev->event_lock);
3863 static void lpt_disable_iclkip(struct drm_i915_private *dev_priv)
3867 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
3869 mutex_lock(&dev_priv->sb_lock);
3871 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3872 temp |= SBI_SSCCTL_DISABLE;
3873 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3875 mutex_unlock(&dev_priv->sb_lock);
3878 /* Program iCLKIP clock to the desired frequency */
3879 static void lpt_program_iclkip(struct drm_crtc *crtc)
3881 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
3882 int clock = to_intel_crtc(crtc)->config->base.adjusted_mode.crtc_clock;
3883 u32 divsel, phaseinc, auxdiv, phasedir = 0;
3886 lpt_disable_iclkip(dev_priv);
3888 /* The iCLK virtual clock root frequency is in MHz,
3889 * but the adjusted_mode->crtc_clock in in KHz. To get the
3890 * divisors, it is necessary to divide one by another, so we
3891 * convert the virtual clock precision to KHz here for higher
3894 for (auxdiv = 0; auxdiv < 2; auxdiv++) {
3895 u32 iclk_virtual_root_freq = 172800 * 1000;
3896 u32 iclk_pi_range = 64;
3897 u32 desired_divisor;
3899 desired_divisor = DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
3901 divsel = (desired_divisor / iclk_pi_range) - 2;
3902 phaseinc = desired_divisor % iclk_pi_range;
3905 * Near 20MHz is a corner case which is
3906 * out of range for the 7-bit divisor
3912 /* This should not happen with any sane values */
3913 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
3914 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
3915 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
3916 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
3918 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
3925 mutex_lock(&dev_priv->sb_lock);
3927 /* Program SSCDIVINTPHASE6 */
3928 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3929 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
3930 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
3931 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
3932 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
3933 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
3934 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
3935 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
3937 /* Program SSCAUXDIV */
3938 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3939 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
3940 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
3941 intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
3943 /* Enable modulator and associated divider */
3944 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3945 temp &= ~SBI_SSCCTL_DISABLE;
3946 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3948 mutex_unlock(&dev_priv->sb_lock);
3950 /* Wait for initialization time */
3953 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
3956 int lpt_get_iclkip(struct drm_i915_private *dev_priv)
3958 u32 divsel, phaseinc, auxdiv;
3959 u32 iclk_virtual_root_freq = 172800 * 1000;
3960 u32 iclk_pi_range = 64;
3961 u32 desired_divisor;
3964 if ((I915_READ(PIXCLK_GATE) & PIXCLK_GATE_UNGATE) == 0)
3967 mutex_lock(&dev_priv->sb_lock);
3969 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3970 if (temp & SBI_SSCCTL_DISABLE) {
3971 mutex_unlock(&dev_priv->sb_lock);
3975 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3976 divsel = (temp & SBI_SSCDIVINTPHASE_DIVSEL_MASK) >>
3977 SBI_SSCDIVINTPHASE_DIVSEL_SHIFT;
3978 phaseinc = (temp & SBI_SSCDIVINTPHASE_INCVAL_MASK) >>
3979 SBI_SSCDIVINTPHASE_INCVAL_SHIFT;
3981 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3982 auxdiv = (temp & SBI_SSCAUXDIV_FINALDIV2SEL_MASK) >>
3983 SBI_SSCAUXDIV_FINALDIV2SEL_SHIFT;
3985 mutex_unlock(&dev_priv->sb_lock);
3987 desired_divisor = (divsel + 2) * iclk_pi_range + phaseinc;
3989 return DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
3990 desired_divisor << auxdiv);
3993 static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
3994 enum pipe pch_transcoder)
3996 struct drm_device *dev = crtc->base.dev;
3997 struct drm_i915_private *dev_priv = dev->dev_private;
3998 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
4000 I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
4001 I915_READ(HTOTAL(cpu_transcoder)));
4002 I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
4003 I915_READ(HBLANK(cpu_transcoder)));
4004 I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
4005 I915_READ(HSYNC(cpu_transcoder)));
4007 I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
4008 I915_READ(VTOTAL(cpu_transcoder)));
4009 I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
4010 I915_READ(VBLANK(cpu_transcoder)));
4011 I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
4012 I915_READ(VSYNC(cpu_transcoder)));
4013 I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
4014 I915_READ(VSYNCSHIFT(cpu_transcoder)));
4017 static void cpt_set_fdi_bc_bifurcation(struct drm_device *dev, bool enable)
4019 struct drm_i915_private *dev_priv = dev->dev_private;
4022 temp = I915_READ(SOUTH_CHICKEN1);
4023 if (!!(temp & FDI_BC_BIFURCATION_SELECT) == enable)
4026 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
4027 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
4029 temp &= ~FDI_BC_BIFURCATION_SELECT;
4031 temp |= FDI_BC_BIFURCATION_SELECT;
4033 DRM_DEBUG_KMS("%sabling fdi C rx\n", enable ? "en" : "dis");
4034 I915_WRITE(SOUTH_CHICKEN1, temp);
4035 POSTING_READ(SOUTH_CHICKEN1);
4038 static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
4040 struct drm_device *dev = intel_crtc->base.dev;
4042 switch (intel_crtc->pipe) {
4046 if (intel_crtc->config->fdi_lanes > 2)
4047 cpt_set_fdi_bc_bifurcation(dev, false);
4049 cpt_set_fdi_bc_bifurcation(dev, true);
4053 cpt_set_fdi_bc_bifurcation(dev, true);
4061 /* Return which DP Port should be selected for Transcoder DP control */
4063 intel_trans_dp_port_sel(struct drm_crtc *crtc)
4065 struct drm_device *dev = crtc->dev;
4066 struct intel_encoder *encoder;
4068 for_each_encoder_on_crtc(dev, crtc, encoder) {
4069 if (encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
4070 encoder->type == INTEL_OUTPUT_EDP)
4071 return enc_to_dig_port(&encoder->base)->port;
4078 * Enable PCH resources required for PCH ports:
4080 * - FDI training & RX/TX
4081 * - update transcoder timings
4082 * - DP transcoding bits
4085 static void ironlake_pch_enable(struct drm_crtc *crtc)
4087 struct drm_device *dev = crtc->dev;
4088 struct drm_i915_private *dev_priv = dev->dev_private;
4089 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4090 int pipe = intel_crtc->pipe;
4093 assert_pch_transcoder_disabled(dev_priv, pipe);
4095 if (IS_IVYBRIDGE(dev))
4096 ivybridge_update_fdi_bc_bifurcation(intel_crtc);
4098 /* Write the TU size bits before fdi link training, so that error
4099 * detection works. */
4100 I915_WRITE(FDI_RX_TUSIZE1(pipe),
4101 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
4103 /* For PCH output, training FDI link */
4104 dev_priv->display.fdi_link_train(crtc);
4106 /* We need to program the right clock selection before writing the pixel
4107 * mutliplier into the DPLL. */
4108 if (HAS_PCH_CPT(dev)) {
4111 temp = I915_READ(PCH_DPLL_SEL);
4112 temp |= TRANS_DPLL_ENABLE(pipe);
4113 sel = TRANS_DPLLB_SEL(pipe);
4114 if (intel_crtc->config->shared_dpll ==
4115 intel_get_shared_dpll_by_id(dev_priv, DPLL_ID_PCH_PLL_B))
4119 I915_WRITE(PCH_DPLL_SEL, temp);
4122 /* XXX: pch pll's can be enabled any time before we enable the PCH
4123 * transcoder, and we actually should do this to not upset any PCH
4124 * transcoder that already use the clock when we share it.
4126 * Note that enable_shared_dpll tries to do the right thing, but
4127 * get_shared_dpll unconditionally resets the pll - we need that to have
4128 * the right LVDS enable sequence. */
4129 intel_enable_shared_dpll(intel_crtc);
4131 /* set transcoder timing, panel must allow it */
4132 assert_panel_unlocked(dev_priv, pipe);
4133 ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
4135 intel_fdi_normal_train(crtc);
4137 /* For PCH DP, enable TRANS_DP_CTL */
4138 if (HAS_PCH_CPT(dev) && intel_crtc->config->has_dp_encoder) {
4139 const struct drm_display_mode *adjusted_mode =
4140 &intel_crtc->config->base.adjusted_mode;
4141 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
4142 i915_reg_t reg = TRANS_DP_CTL(pipe);
4143 temp = I915_READ(reg);
4144 temp &= ~(TRANS_DP_PORT_SEL_MASK |
4145 TRANS_DP_SYNC_MASK |
4147 temp |= TRANS_DP_OUTPUT_ENABLE;
4148 temp |= bpc << 9; /* same format but at 11:9 */
4150 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
4151 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
4152 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
4153 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
4155 switch (intel_trans_dp_port_sel(crtc)) {
4157 temp |= TRANS_DP_PORT_SEL_B;
4160 temp |= TRANS_DP_PORT_SEL_C;
4163 temp |= TRANS_DP_PORT_SEL_D;
4169 I915_WRITE(reg, temp);
4172 ironlake_enable_pch_transcoder(dev_priv, pipe);
4175 static void lpt_pch_enable(struct drm_crtc *crtc)
4177 struct drm_device *dev = crtc->dev;
4178 struct drm_i915_private *dev_priv = dev->dev_private;
4179 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4180 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
4182 assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
4184 lpt_program_iclkip(crtc);
4186 /* Set transcoder timing. */
4187 ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
4189 lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
4192 static void cpt_verify_modeset(struct drm_device *dev, int pipe)
4194 struct drm_i915_private *dev_priv = dev->dev_private;
4195 i915_reg_t dslreg = PIPEDSL(pipe);
4198 temp = I915_READ(dslreg);
4200 if (wait_for(I915_READ(dslreg) != temp, 5)) {
4201 if (wait_for(I915_READ(dslreg) != temp, 5))
4202 DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
4207 skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
4208 unsigned scaler_user, int *scaler_id, unsigned int rotation,
4209 int src_w, int src_h, int dst_w, int dst_h)
4211 struct intel_crtc_scaler_state *scaler_state =
4212 &crtc_state->scaler_state;
4213 struct intel_crtc *intel_crtc =
4214 to_intel_crtc(crtc_state->base.crtc);
4217 need_scaling = intel_rotation_90_or_270(rotation) ?
4218 (src_h != dst_w || src_w != dst_h):
4219 (src_w != dst_w || src_h != dst_h);
4222 * if plane is being disabled or scaler is no more required or force detach
4223 * - free scaler binded to this plane/crtc
4224 * - in order to do this, update crtc->scaler_usage
4226 * Here scaler state in crtc_state is set free so that
4227 * scaler can be assigned to other user. Actual register
4228 * update to free the scaler is done in plane/panel-fit programming.
4229 * For this purpose crtc/plane_state->scaler_id isn't reset here.
4231 if (force_detach || !need_scaling) {
4232 if (*scaler_id >= 0) {
4233 scaler_state->scaler_users &= ~(1 << scaler_user);
4234 scaler_state->scalers[*scaler_id].in_use = 0;
4236 DRM_DEBUG_KMS("scaler_user index %u.%u: "
4237 "Staged freeing scaler id %d scaler_users = 0x%x\n",
4238 intel_crtc->pipe, scaler_user, *scaler_id,
4239 scaler_state->scaler_users);
4246 if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
4247 dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
4249 src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
4250 dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H) {
4251 DRM_DEBUG_KMS("scaler_user index %u.%u: src %ux%u dst %ux%u "
4252 "size is out of scaler range\n",
4253 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h);
4257 /* mark this plane as a scaler user in crtc_state */
4258 scaler_state->scaler_users |= (1 << scaler_user);
4259 DRM_DEBUG_KMS("scaler_user index %u.%u: "
4260 "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
4261 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
4262 scaler_state->scaler_users);
4268 * skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
4270 * @state: crtc's scaler state
4273 * 0 - scaler_usage updated successfully
4274 * error - requested scaling cannot be supported or other error condition
4276 int skl_update_scaler_crtc(struct intel_crtc_state *state)
4278 struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
4279 const struct drm_display_mode *adjusted_mode = &state->base.adjusted_mode;
4281 DRM_DEBUG_KMS("Updating scaler for [CRTC:%d:%s] scaler_user index %u.%u\n",
4282 intel_crtc->base.base.id, intel_crtc->base.name,
4283 intel_crtc->pipe, SKL_CRTC_INDEX);
4285 return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
4286 &state->scaler_state.scaler_id, BIT(DRM_ROTATE_0),
4287 state->pipe_src_w, state->pipe_src_h,
4288 adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
4292 * skl_update_scaler_plane - Stages update to scaler state for a given plane.
4294 * @state: crtc's scaler state
4295 * @plane_state: atomic plane state to update
4298 * 0 - scaler_usage updated successfully
4299 * error - requested scaling cannot be supported or other error condition
4301 static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
4302 struct intel_plane_state *plane_state)
4305 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
4306 struct intel_plane *intel_plane =
4307 to_intel_plane(plane_state->base.plane);
4308 struct drm_framebuffer *fb = plane_state->base.fb;
4311 bool force_detach = !fb || !plane_state->visible;
4313 DRM_DEBUG_KMS("Updating scaler for [PLANE:%d:%s] scaler_user index %u.%u\n",
4314 intel_plane->base.base.id, intel_plane->base.name,
4315 intel_crtc->pipe, drm_plane_index(&intel_plane->base));
4317 ret = skl_update_scaler(crtc_state, force_detach,
4318 drm_plane_index(&intel_plane->base),
4319 &plane_state->scaler_id,
4320 plane_state->base.rotation,
4321 drm_rect_width(&plane_state->src) >> 16,
4322 drm_rect_height(&plane_state->src) >> 16,
4323 drm_rect_width(&plane_state->dst),
4324 drm_rect_height(&plane_state->dst));
4326 if (ret || plane_state->scaler_id < 0)
4329 /* check colorkey */
4330 if (plane_state->ckey.flags != I915_SET_COLORKEY_NONE) {
4331 DRM_DEBUG_KMS("[PLANE:%d:%s] scaling with color key not allowed",
4332 intel_plane->base.base.id,
4333 intel_plane->base.name);
4337 /* Check src format */
4338 switch (fb->pixel_format) {
4339 case DRM_FORMAT_RGB565:
4340 case DRM_FORMAT_XBGR8888:
4341 case DRM_FORMAT_XRGB8888:
4342 case DRM_FORMAT_ABGR8888:
4343 case DRM_FORMAT_ARGB8888:
4344 case DRM_FORMAT_XRGB2101010:
4345 case DRM_FORMAT_XBGR2101010:
4346 case DRM_FORMAT_YUYV:
4347 case DRM_FORMAT_YVYU:
4348 case DRM_FORMAT_UYVY:
4349 case DRM_FORMAT_VYUY:
4352 DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
4353 intel_plane->base.base.id, intel_plane->base.name,
4354 fb->base.id, fb->pixel_format);
4361 static void skylake_scaler_disable(struct intel_crtc *crtc)
4365 for (i = 0; i < crtc->num_scalers; i++)
4366 skl_detach_scaler(crtc, i);
4369 static void skylake_pfit_enable(struct intel_crtc *crtc)
4371 struct drm_device *dev = crtc->base.dev;
4372 struct drm_i915_private *dev_priv = dev->dev_private;
4373 int pipe = crtc->pipe;
4374 struct intel_crtc_scaler_state *scaler_state =
4375 &crtc->config->scaler_state;
4377 DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
4379 if (crtc->config->pch_pfit.enabled) {
4382 if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
4383 DRM_ERROR("Requesting pfit without getting a scaler first\n");
4387 id = scaler_state->scaler_id;
4388 I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
4389 PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
4390 I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
4391 I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
4393 DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
4397 static void ironlake_pfit_enable(struct intel_crtc *crtc)
4399 struct drm_device *dev = crtc->base.dev;
4400 struct drm_i915_private *dev_priv = dev->dev_private;
4401 int pipe = crtc->pipe;
4403 if (crtc->config->pch_pfit.enabled) {
4404 /* Force use of hard-coded filter coefficients
4405 * as some pre-programmed values are broken,
4408 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
4409 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
4410 PF_PIPE_SEL_IVB(pipe));
4412 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
4413 I915_WRITE(PF_WIN_POS(pipe), crtc->config->pch_pfit.pos);
4414 I915_WRITE(PF_WIN_SZ(pipe), crtc->config->pch_pfit.size);
4418 void hsw_enable_ips(struct intel_crtc *crtc)
4420 struct drm_device *dev = crtc->base.dev;
4421 struct drm_i915_private *dev_priv = dev->dev_private;
4423 if (!crtc->config->ips_enabled)
4427 * We can only enable IPS after we enable a plane and wait for a vblank
4428 * This function is called from post_plane_update, which is run after
4432 assert_plane_enabled(dev_priv, crtc->plane);
4433 if (IS_BROADWELL(dev)) {
4434 mutex_lock(&dev_priv->rps.hw_lock);
4435 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000));
4436 mutex_unlock(&dev_priv->rps.hw_lock);
4437 /* Quoting Art Runyan: "its not safe to expect any particular
4438 * value in IPS_CTL bit 31 after enabling IPS through the
4439 * mailbox." Moreover, the mailbox may return a bogus state,
4440 * so we need to just enable it and continue on.
4443 I915_WRITE(IPS_CTL, IPS_ENABLE);
4444 /* The bit only becomes 1 in the next vblank, so this wait here
4445 * is essentially intel_wait_for_vblank. If we don't have this
4446 * and don't wait for vblanks until the end of crtc_enable, then
4447 * the HW state readout code will complain that the expected
4448 * IPS_CTL value is not the one we read. */
4449 if (wait_for(I915_READ_NOTRACE(IPS_CTL) & IPS_ENABLE, 50))
4450 DRM_ERROR("Timed out waiting for IPS enable\n");
4454 void hsw_disable_ips(struct intel_crtc *crtc)
4456 struct drm_device *dev = crtc->base.dev;
4457 struct drm_i915_private *dev_priv = dev->dev_private;
4459 if (!crtc->config->ips_enabled)
4462 assert_plane_enabled(dev_priv, crtc->plane);
4463 if (IS_BROADWELL(dev)) {
4464 mutex_lock(&dev_priv->rps.hw_lock);
4465 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
4466 mutex_unlock(&dev_priv->rps.hw_lock);
4467 /* wait for pcode to finish disabling IPS, which may take up to 42ms */
4468 if (wait_for((I915_READ(IPS_CTL) & IPS_ENABLE) == 0, 42))
4469 DRM_ERROR("Timed out waiting for IPS disable\n");
4471 I915_WRITE(IPS_CTL, 0);
4472 POSTING_READ(IPS_CTL);
4475 /* We need to wait for a vblank before we can disable the plane. */
4476 intel_wait_for_vblank(dev, crtc->pipe);
4479 static void intel_crtc_dpms_overlay_disable(struct intel_crtc *intel_crtc)
4481 if (intel_crtc->overlay) {
4482 struct drm_device *dev = intel_crtc->base.dev;
4483 struct drm_i915_private *dev_priv = dev->dev_private;
4485 mutex_lock(&dev->struct_mutex);
4486 dev_priv->mm.interruptible = false;
4487 (void) intel_overlay_switch_off(intel_crtc->overlay);
4488 dev_priv->mm.interruptible = true;
4489 mutex_unlock(&dev->struct_mutex);
4492 /* Let userspace switch the overlay on again. In most cases userspace
4493 * has to recompute where to put it anyway.
4498 * intel_post_enable_primary - Perform operations after enabling primary plane
4499 * @crtc: the CRTC whose primary plane was just enabled
4501 * Performs potentially sleeping operations that must be done after the primary
4502 * plane is enabled, such as updating FBC and IPS. Note that this may be
4503 * called due to an explicit primary plane update, or due to an implicit
4504 * re-enable that is caused when a sprite plane is updated to no longer
4505 * completely hide the primary plane.
4508 intel_post_enable_primary(struct drm_crtc *crtc)
4510 struct drm_device *dev = crtc->dev;
4511 struct drm_i915_private *dev_priv = dev->dev_private;
4512 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4513 int pipe = intel_crtc->pipe;
4516 * FIXME IPS should be fine as long as one plane is
4517 * enabled, but in practice it seems to have problems
4518 * when going from primary only to sprite only and vice
4521 hsw_enable_ips(intel_crtc);
4524 * Gen2 reports pipe underruns whenever all planes are disabled.
4525 * So don't enable underrun reporting before at least some planes
4527 * FIXME: Need to fix the logic to work when we turn off all planes
4528 * but leave the pipe running.
4531 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4533 /* Underruns don't always raise interrupts, so check manually. */
4534 intel_check_cpu_fifo_underruns(dev_priv);
4535 intel_check_pch_fifo_underruns(dev_priv);
4538 /* FIXME move all this to pre_plane_update() with proper state tracking */
4540 intel_pre_disable_primary(struct drm_crtc *crtc)
4542 struct drm_device *dev = crtc->dev;
4543 struct drm_i915_private *dev_priv = dev->dev_private;
4544 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4545 int pipe = intel_crtc->pipe;
4548 * Gen2 reports pipe underruns whenever all planes are disabled.
4549 * So diasble underrun reporting before all the planes get disabled.
4550 * FIXME: Need to fix the logic to work when we turn off all planes
4551 * but leave the pipe running.
4554 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4557 * FIXME IPS should be fine as long as one plane is
4558 * enabled, but in practice it seems to have problems
4559 * when going from primary only to sprite only and vice
4562 hsw_disable_ips(intel_crtc);
4565 /* FIXME get rid of this and use pre_plane_update */
4567 intel_pre_disable_primary_noatomic(struct drm_crtc *crtc)
4569 struct drm_device *dev = crtc->dev;
4570 struct drm_i915_private *dev_priv = dev->dev_private;
4571 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4572 int pipe = intel_crtc->pipe;
4574 intel_pre_disable_primary(crtc);
4577 * Vblank time updates from the shadow to live plane control register
4578 * are blocked if the memory self-refresh mode is active at that
4579 * moment. So to make sure the plane gets truly disabled, disable
4580 * first the self-refresh mode. The self-refresh enable bit in turn
4581 * will be checked/applied by the HW only at the next frame start
4582 * event which is after the vblank start event, so we need to have a
4583 * wait-for-vblank between disabling the plane and the pipe.
4585 if (HAS_GMCH_DISPLAY(dev)) {
4586 intel_set_memory_cxsr(dev_priv, false);
4587 dev_priv->wm.vlv.cxsr = false;
4588 intel_wait_for_vblank(dev, pipe);
4592 static void intel_post_plane_update(struct intel_crtc_state *old_crtc_state)
4594 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
4595 struct drm_atomic_state *old_state = old_crtc_state->base.state;
4596 struct intel_crtc_state *pipe_config =
4597 to_intel_crtc_state(crtc->base.state);
4598 struct drm_device *dev = crtc->base.dev;
4599 struct drm_plane *primary = crtc->base.primary;
4600 struct drm_plane_state *old_pri_state =
4601 drm_atomic_get_existing_plane_state(old_state, primary);
4603 intel_frontbuffer_flip(dev, pipe_config->fb_bits);
4605 crtc->wm.cxsr_allowed = true;
4607 if (pipe_config->update_wm_post && pipe_config->base.active)
4608 intel_update_watermarks(&crtc->base);
4610 if (old_pri_state) {
4611 struct intel_plane_state *primary_state =
4612 to_intel_plane_state(primary->state);
4613 struct intel_plane_state *old_primary_state =
4614 to_intel_plane_state(old_pri_state);
4616 intel_fbc_post_update(crtc);
4618 if (primary_state->visible &&
4619 (needs_modeset(&pipe_config->base) ||
4620 !old_primary_state->visible))
4621 intel_post_enable_primary(&crtc->base);
4625 static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state)
4627 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
4628 struct drm_device *dev = crtc->base.dev;
4629 struct drm_i915_private *dev_priv = dev->dev_private;
4630 struct intel_crtc_state *pipe_config =
4631 to_intel_crtc_state(crtc->base.state);
4632 struct drm_atomic_state *old_state = old_crtc_state->base.state;
4633 struct drm_plane *primary = crtc->base.primary;
4634 struct drm_plane_state *old_pri_state =
4635 drm_atomic_get_existing_plane_state(old_state, primary);
4636 bool modeset = needs_modeset(&pipe_config->base);
4638 if (old_pri_state) {
4639 struct intel_plane_state *primary_state =
4640 to_intel_plane_state(primary->state);
4641 struct intel_plane_state *old_primary_state =
4642 to_intel_plane_state(old_pri_state);
4644 intel_fbc_pre_update(crtc, pipe_config, primary_state);
4646 if (old_primary_state->visible &&
4647 (modeset || !primary_state->visible))
4648 intel_pre_disable_primary(&crtc->base);
4651 if (pipe_config->disable_cxsr && HAS_GMCH_DISPLAY(dev)) {
4652 crtc->wm.cxsr_allowed = false;
4655 * Vblank time updates from the shadow to live plane control register
4656 * are blocked if the memory self-refresh mode is active at that
4657 * moment. So to make sure the plane gets truly disabled, disable
4658 * first the self-refresh mode. The self-refresh enable bit in turn
4659 * will be checked/applied by the HW only at the next frame start
4660 * event which is after the vblank start event, so we need to have a
4661 * wait-for-vblank between disabling the plane and the pipe.
4663 if (old_crtc_state->base.active) {
4664 intel_set_memory_cxsr(dev_priv, false);
4665 dev_priv->wm.vlv.cxsr = false;
4666 intel_wait_for_vblank(dev, crtc->pipe);
4671 * IVB workaround: must disable low power watermarks for at least
4672 * one frame before enabling scaling. LP watermarks can be re-enabled
4673 * when scaling is disabled.
4675 * WaCxSRDisabledForSpriteScaling:ivb
4677 if (pipe_config->disable_lp_wm) {
4678 ilk_disable_lp_wm(dev);
4679 intel_wait_for_vblank(dev, crtc->pipe);
4683 * If we're doing a modeset, we're done. No need to do any pre-vblank
4684 * watermark programming here.
4686 if (needs_modeset(&pipe_config->base))
4690 * For platforms that support atomic watermarks, program the
4691 * 'intermediate' watermarks immediately. On pre-gen9 platforms, these
4692 * will be the intermediate values that are safe for both pre- and
4693 * post- vblank; when vblank happens, the 'active' values will be set
4694 * to the final 'target' values and we'll do this again to get the
4695 * optimal watermarks. For gen9+ platforms, the values we program here
4696 * will be the final target values which will get automatically latched
4697 * at vblank time; no further programming will be necessary.
4699 * If a platform hasn't been transitioned to atomic watermarks yet,
4700 * we'll continue to update watermarks the old way, if flags tell
4703 if (dev_priv->display.initial_watermarks != NULL)
4704 dev_priv->display.initial_watermarks(pipe_config);
4705 else if (pipe_config->update_wm_pre)
4706 intel_update_watermarks(&crtc->base);
4709 static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask)
4711 struct drm_device *dev = crtc->dev;
4712 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4713 struct drm_plane *p;
4714 int pipe = intel_crtc->pipe;
4716 intel_crtc_dpms_overlay_disable(intel_crtc);
4718 drm_for_each_plane_mask(p, dev, plane_mask)
4719 to_intel_plane(p)->disable_plane(p, crtc);
4722 * FIXME: Once we grow proper nuclear flip support out of this we need
4723 * to compute the mask of flip planes precisely. For the time being
4724 * consider this a flip to a NULL plane.
4726 intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
4729 static void ironlake_crtc_enable(struct drm_crtc *crtc)
4731 struct drm_device *dev = crtc->dev;
4732 struct drm_i915_private *dev_priv = dev->dev_private;
4733 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4734 struct intel_encoder *encoder;
4735 int pipe = intel_crtc->pipe;
4736 struct intel_crtc_state *pipe_config =
4737 to_intel_crtc_state(crtc->state);
4739 if (WARN_ON(intel_crtc->active))
4743 * Sometimes spurious CPU pipe underruns happen during FDI
4744 * training, at least with VGA+HDMI cloning. Suppress them.
4746 * On ILK we get an occasional spurious CPU pipe underruns
4747 * between eDP port A enable and vdd enable. Also PCH port
4748 * enable seems to result in the occasional CPU pipe underrun.
4750 * Spurious PCH underruns also occur during PCH enabling.
4752 if (intel_crtc->config->has_pch_encoder || IS_GEN5(dev_priv))
4753 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4754 if (intel_crtc->config->has_pch_encoder)
4755 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
4757 if (intel_crtc->config->has_pch_encoder)
4758 intel_prepare_shared_dpll(intel_crtc);
4760 if (intel_crtc->config->has_dp_encoder)
4761 intel_dp_set_m_n(intel_crtc, M1_N1);
4763 intel_set_pipe_timings(intel_crtc);
4764 intel_set_pipe_src_size(intel_crtc);
4766 if (intel_crtc->config->has_pch_encoder) {
4767 intel_cpu_transcoder_set_m_n(intel_crtc,
4768 &intel_crtc->config->fdi_m_n, NULL);
4771 ironlake_set_pipeconf(crtc);
4773 intel_crtc->active = true;
4775 for_each_encoder_on_crtc(dev, crtc, encoder)
4776 if (encoder->pre_enable)
4777 encoder->pre_enable(encoder);
4779 if (intel_crtc->config->has_pch_encoder) {
4780 /* Note: FDI PLL enabling _must_ be done before we enable the
4781 * cpu pipes, hence this is separate from all the other fdi/pch
4783 ironlake_fdi_pll_enable(intel_crtc);
4785 assert_fdi_tx_disabled(dev_priv, pipe);
4786 assert_fdi_rx_disabled(dev_priv, pipe);
4789 ironlake_pfit_enable(intel_crtc);
4792 * On ILK+ LUT must be loaded before the pipe is running but with
4795 intel_color_load_luts(&pipe_config->base);
4797 if (dev_priv->display.initial_watermarks != NULL)
4798 dev_priv->display.initial_watermarks(intel_crtc->config);
4799 intel_enable_pipe(intel_crtc);
4801 if (intel_crtc->config->has_pch_encoder)
4802 ironlake_pch_enable(crtc);
4804 assert_vblank_disabled(crtc);
4805 drm_crtc_vblank_on(crtc);
4807 for_each_encoder_on_crtc(dev, crtc, encoder)
4808 encoder->enable(encoder);
4810 if (HAS_PCH_CPT(dev))
4811 cpt_verify_modeset(dev, intel_crtc->pipe);
4813 /* Must wait for vblank to avoid spurious PCH FIFO underruns */
4814 if (intel_crtc->config->has_pch_encoder)
4815 intel_wait_for_vblank(dev, pipe);
4816 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4817 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
4820 /* IPS only exists on ULT machines and is tied to pipe A. */
4821 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
4823 return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
4826 static void haswell_crtc_enable(struct drm_crtc *crtc)
4828 struct drm_device *dev = crtc->dev;
4829 struct drm_i915_private *dev_priv = dev->dev_private;
4830 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4831 struct intel_encoder *encoder;
4832 int pipe = intel_crtc->pipe, hsw_workaround_pipe;
4833 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
4834 struct intel_crtc_state *pipe_config =
4835 to_intel_crtc_state(crtc->state);
4837 if (WARN_ON(intel_crtc->active))
4840 if (intel_crtc->config->has_pch_encoder)
4841 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
4844 for_each_encoder_on_crtc(dev, crtc, encoder)
4845 if (encoder->pre_pll_enable)
4846 encoder->pre_pll_enable(encoder);
4848 if (intel_crtc->config->shared_dpll)
4849 intel_enable_shared_dpll(intel_crtc);
4851 if (intel_crtc->config->has_dp_encoder)
4852 intel_dp_set_m_n(intel_crtc, M1_N1);
4854 if (!intel_crtc->config->has_dsi_encoder)
4855 intel_set_pipe_timings(intel_crtc);
4857 intel_set_pipe_src_size(intel_crtc);
4859 if (cpu_transcoder != TRANSCODER_EDP &&
4860 !transcoder_is_dsi(cpu_transcoder)) {
4861 I915_WRITE(PIPE_MULT(cpu_transcoder),
4862 intel_crtc->config->pixel_multiplier - 1);
4865 if (intel_crtc->config->has_pch_encoder) {
4866 intel_cpu_transcoder_set_m_n(intel_crtc,
4867 &intel_crtc->config->fdi_m_n, NULL);
4870 if (!intel_crtc->config->has_dsi_encoder)
4871 haswell_set_pipeconf(crtc);
4873 haswell_set_pipemisc(crtc);
4875 intel_color_set_csc(&pipe_config->base);
4877 intel_crtc->active = true;
4879 if (intel_crtc->config->has_pch_encoder)
4880 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4882 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4884 for_each_encoder_on_crtc(dev, crtc, encoder) {
4885 if (encoder->pre_enable)
4886 encoder->pre_enable(encoder);
4889 if (intel_crtc->config->has_pch_encoder)
4890 dev_priv->display.fdi_link_train(crtc);
4892 if (!intel_crtc->config->has_dsi_encoder)
4893 intel_ddi_enable_pipe_clock(intel_crtc);
4895 if (INTEL_INFO(dev)->gen >= 9)
4896 skylake_pfit_enable(intel_crtc);
4898 ironlake_pfit_enable(intel_crtc);
4901 * On ILK+ LUT must be loaded before the pipe is running but with
4904 intel_color_load_luts(&pipe_config->base);
4906 intel_ddi_set_pipe_settings(crtc);
4907 if (!intel_crtc->config->has_dsi_encoder)
4908 intel_ddi_enable_transcoder_func(crtc);
4910 if (dev_priv->display.initial_watermarks != NULL)
4911 dev_priv->display.initial_watermarks(pipe_config);
4913 intel_update_watermarks(crtc);
4915 /* XXX: Do the pipe assertions at the right place for BXT DSI. */
4916 if (!intel_crtc->config->has_dsi_encoder)
4917 intel_enable_pipe(intel_crtc);
4919 if (intel_crtc->config->has_pch_encoder)
4920 lpt_pch_enable(crtc);
4922 if (intel_crtc->config->dp_encoder_is_mst)
4923 intel_ddi_set_vc_payload_alloc(crtc, true);
4925 assert_vblank_disabled(crtc);
4926 drm_crtc_vblank_on(crtc);
4928 for_each_encoder_on_crtc(dev, crtc, encoder) {
4929 encoder->enable(encoder);
4930 intel_opregion_notify_encoder(encoder, true);
4933 if (intel_crtc->config->has_pch_encoder) {
4934 intel_wait_for_vblank(dev, pipe);
4935 intel_wait_for_vblank(dev, pipe);
4936 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4937 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
4941 /* If we change the relative order between pipe/planes enabling, we need
4942 * to change the workaround. */
4943 hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
4944 if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
4945 intel_wait_for_vblank(dev, hsw_workaround_pipe);
4946 intel_wait_for_vblank(dev, hsw_workaround_pipe);
4950 static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force)
4952 struct drm_device *dev = crtc->base.dev;
4953 struct drm_i915_private *dev_priv = dev->dev_private;
4954 int pipe = crtc->pipe;
4956 /* To avoid upsetting the power well on haswell only disable the pfit if
4957 * it's in use. The hw state code will make sure we get this right. */
4958 if (force || crtc->config->pch_pfit.enabled) {
4959 I915_WRITE(PF_CTL(pipe), 0);
4960 I915_WRITE(PF_WIN_POS(pipe), 0);
4961 I915_WRITE(PF_WIN_SZ(pipe), 0);
4965 static void ironlake_crtc_disable(struct drm_crtc *crtc)
4967 struct drm_device *dev = crtc->dev;
4968 struct drm_i915_private *dev_priv = dev->dev_private;
4969 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4970 struct intel_encoder *encoder;
4971 int pipe = intel_crtc->pipe;
4974 * Sometimes spurious CPU pipe underruns happen when the
4975 * pipe is already disabled, but FDI RX/TX is still enabled.
4976 * Happens at least with VGA+HDMI cloning. Suppress them.
4978 if (intel_crtc->config->has_pch_encoder) {
4979 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4980 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
4983 for_each_encoder_on_crtc(dev, crtc, encoder)
4984 encoder->disable(encoder);
4986 drm_crtc_vblank_off(crtc);
4987 assert_vblank_disabled(crtc);
4989 intel_disable_pipe(intel_crtc);
4991 ironlake_pfit_disable(intel_crtc, false);
4993 if (intel_crtc->config->has_pch_encoder)
4994 ironlake_fdi_disable(crtc);
4996 for_each_encoder_on_crtc(dev, crtc, encoder)
4997 if (encoder->post_disable)
4998 encoder->post_disable(encoder);
5000 if (intel_crtc->config->has_pch_encoder) {
5001 ironlake_disable_pch_transcoder(dev_priv, pipe);
5003 if (HAS_PCH_CPT(dev)) {
5007 /* disable TRANS_DP_CTL */
5008 reg = TRANS_DP_CTL(pipe);
5009 temp = I915_READ(reg);
5010 temp &= ~(TRANS_DP_OUTPUT_ENABLE |
5011 TRANS_DP_PORT_SEL_MASK);
5012 temp |= TRANS_DP_PORT_SEL_NONE;
5013 I915_WRITE(reg, temp);
5015 /* disable DPLL_SEL */
5016 temp = I915_READ(PCH_DPLL_SEL);
5017 temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
5018 I915_WRITE(PCH_DPLL_SEL, temp);
5021 ironlake_fdi_pll_disable(intel_crtc);
5024 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
5025 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
5028 static void haswell_crtc_disable(struct drm_crtc *crtc)
5030 struct drm_device *dev = crtc->dev;
5031 struct drm_i915_private *dev_priv = dev->dev_private;
5032 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5033 struct intel_encoder *encoder;
5034 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
5036 if (intel_crtc->config->has_pch_encoder)
5037 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
5040 for_each_encoder_on_crtc(dev, crtc, encoder) {
5041 intel_opregion_notify_encoder(encoder, false);
5042 encoder->disable(encoder);
5045 drm_crtc_vblank_off(crtc);
5046 assert_vblank_disabled(crtc);
5048 /* XXX: Do the pipe assertions at the right place for BXT DSI. */
5049 if (!intel_crtc->config->has_dsi_encoder)
5050 intel_disable_pipe(intel_crtc);
5052 if (intel_crtc->config->dp_encoder_is_mst)
5053 intel_ddi_set_vc_payload_alloc(crtc, false);
5055 if (!intel_crtc->config->has_dsi_encoder)
5056 intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
5058 if (INTEL_INFO(dev)->gen >= 9)
5059 skylake_scaler_disable(intel_crtc);
5061 ironlake_pfit_disable(intel_crtc, false);
5063 if (!intel_crtc->config->has_dsi_encoder)
5064 intel_ddi_disable_pipe_clock(intel_crtc);
5066 for_each_encoder_on_crtc(dev, crtc, encoder)
5067 if (encoder->post_disable)
5068 encoder->post_disable(encoder);
5070 if (intel_crtc->config->has_pch_encoder) {
5071 lpt_disable_pch_transcoder(dev_priv);
5072 lpt_disable_iclkip(dev_priv);
5073 intel_ddi_fdi_disable(crtc);
5075 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
5080 static void i9xx_pfit_enable(struct intel_crtc *crtc)
5082 struct drm_device *dev = crtc->base.dev;
5083 struct drm_i915_private *dev_priv = dev->dev_private;
5084 struct intel_crtc_state *pipe_config = crtc->config;
5086 if (!pipe_config->gmch_pfit.control)
5090 * The panel fitter should only be adjusted whilst the pipe is disabled,
5091 * according to register description and PRM.
5093 WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
5094 assert_pipe_disabled(dev_priv, crtc->pipe);
5096 I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
5097 I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
5099 /* Border color in case we don't scale up to the full screen. Black by
5100 * default, change to something else for debugging. */
5101 I915_WRITE(BCLRPAT(crtc->pipe), 0);
5104 static enum intel_display_power_domain port_to_power_domain(enum port port)
5108 return POWER_DOMAIN_PORT_DDI_A_LANES;
5110 return POWER_DOMAIN_PORT_DDI_B_LANES;
5112 return POWER_DOMAIN_PORT_DDI_C_LANES;
5114 return POWER_DOMAIN_PORT_DDI_D_LANES;
5116 return POWER_DOMAIN_PORT_DDI_E_LANES;
5119 return POWER_DOMAIN_PORT_OTHER;
5123 static enum intel_display_power_domain port_to_aux_power_domain(enum port port)
5127 return POWER_DOMAIN_AUX_A;
5129 return POWER_DOMAIN_AUX_B;
5131 return POWER_DOMAIN_AUX_C;
5133 return POWER_DOMAIN_AUX_D;
5135 /* FIXME: Check VBT for actual wiring of PORT E */
5136 return POWER_DOMAIN_AUX_D;
5139 return POWER_DOMAIN_AUX_A;
5143 enum intel_display_power_domain
5144 intel_display_port_power_domain(struct intel_encoder *intel_encoder)
5146 struct drm_device *dev = intel_encoder->base.dev;
5147 struct intel_digital_port *intel_dig_port;
5149 switch (intel_encoder->type) {
5150 case INTEL_OUTPUT_UNKNOWN:
5151 /* Only DDI platforms should ever use this output type */
5152 WARN_ON_ONCE(!HAS_DDI(dev));
5153 case INTEL_OUTPUT_DISPLAYPORT:
5154 case INTEL_OUTPUT_HDMI:
5155 case INTEL_OUTPUT_EDP:
5156 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
5157 return port_to_power_domain(intel_dig_port->port);
5158 case INTEL_OUTPUT_DP_MST:
5159 intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
5160 return port_to_power_domain(intel_dig_port->port);
5161 case INTEL_OUTPUT_ANALOG:
5162 return POWER_DOMAIN_PORT_CRT;
5163 case INTEL_OUTPUT_DSI:
5164 return POWER_DOMAIN_PORT_DSI;
5166 return POWER_DOMAIN_PORT_OTHER;
5170 enum intel_display_power_domain
5171 intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
5173 struct drm_device *dev = intel_encoder->base.dev;
5174 struct intel_digital_port *intel_dig_port;
5176 switch (intel_encoder->type) {
5177 case INTEL_OUTPUT_UNKNOWN:
5178 case INTEL_OUTPUT_HDMI:
5180 * Only DDI platforms should ever use these output types.
5181 * We can get here after the HDMI detect code has already set
5182 * the type of the shared encoder. Since we can't be sure
5183 * what's the status of the given connectors, play safe and
5184 * run the DP detection too.
5186 WARN_ON_ONCE(!HAS_DDI(dev));
5187 case INTEL_OUTPUT_DISPLAYPORT:
5188 case INTEL_OUTPUT_EDP:
5189 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
5190 return port_to_aux_power_domain(intel_dig_port->port);
5191 case INTEL_OUTPUT_DP_MST:
5192 intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
5193 return port_to_aux_power_domain(intel_dig_port->port);
5195 MISSING_CASE(intel_encoder->type);
5196 return POWER_DOMAIN_AUX_A;
5200 static unsigned long get_crtc_power_domains(struct drm_crtc *crtc,
5201 struct intel_crtc_state *crtc_state)
5203 struct drm_device *dev = crtc->dev;
5204 struct drm_encoder *encoder;
5205 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5206 enum pipe pipe = intel_crtc->pipe;
5208 enum transcoder transcoder = crtc_state->cpu_transcoder;
5210 if (!crtc_state->base.active)
5213 mask = BIT(POWER_DOMAIN_PIPE(pipe));
5214 mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder));
5215 if (crtc_state->pch_pfit.enabled ||
5216 crtc_state->pch_pfit.force_thru)
5217 mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
5219 drm_for_each_encoder_mask(encoder, dev, crtc_state->base.encoder_mask) {
5220 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
5222 mask |= BIT(intel_display_port_power_domain(intel_encoder));
5225 if (crtc_state->shared_dpll)
5226 mask |= BIT(POWER_DOMAIN_PLLS);
5231 static unsigned long
5232 modeset_get_crtc_power_domains(struct drm_crtc *crtc,
5233 struct intel_crtc_state *crtc_state)
5235 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5236 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5237 enum intel_display_power_domain domain;
5238 unsigned long domains, new_domains, old_domains;
5240 old_domains = intel_crtc->enabled_power_domains;
5241 intel_crtc->enabled_power_domains = new_domains =
5242 get_crtc_power_domains(crtc, crtc_state);
5244 domains = new_domains & ~old_domains;
5246 for_each_power_domain(domain, domains)
5247 intel_display_power_get(dev_priv, domain);
5249 return old_domains & ~new_domains;
5252 static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
5253 unsigned long domains)
5255 enum intel_display_power_domain domain;
5257 for_each_power_domain(domain, domains)
5258 intel_display_power_put(dev_priv, domain);
5261 static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
5263 int max_cdclk_freq = dev_priv->max_cdclk_freq;
5265 if (INTEL_INFO(dev_priv)->gen >= 9 ||
5266 IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
5267 return max_cdclk_freq;
5268 else if (IS_CHERRYVIEW(dev_priv))
5269 return max_cdclk_freq*95/100;
5270 else if (INTEL_INFO(dev_priv)->gen < 4)
5271 return 2*max_cdclk_freq*90/100;
5273 return max_cdclk_freq*90/100;
5276 static int skl_calc_cdclk(int max_pixclk, int vco);
5278 static void intel_update_max_cdclk(struct drm_device *dev)
5280 struct drm_i915_private *dev_priv = dev->dev_private;
5282 if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
5283 u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
5286 vco = dev_priv->skl_preferred_vco_freq;
5287 WARN_ON(vco != 8100000 && vco != 8640000);
5290 * Use the lower (vco 8640) cdclk values as a
5291 * first guess. skl_calc_cdclk() will correct it
5292 * if the preferred vco is 8100 instead.
5294 if (limit == SKL_DFSM_CDCLK_LIMIT_675)
5296 else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
5298 else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
5303 dev_priv->max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco);
5304 } else if (IS_BROXTON(dev)) {
5305 dev_priv->max_cdclk_freq = 624000;
5306 } else if (IS_BROADWELL(dev)) {
5308 * FIXME with extra cooling we can allow
5309 * 540 MHz for ULX and 675 Mhz for ULT.
5310 * How can we know if extra cooling is
5311 * available? PCI ID, VTB, something else?
5313 if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
5314 dev_priv->max_cdclk_freq = 450000;
5315 else if (IS_BDW_ULX(dev))
5316 dev_priv->max_cdclk_freq = 450000;
5317 else if (IS_BDW_ULT(dev))
5318 dev_priv->max_cdclk_freq = 540000;
5320 dev_priv->max_cdclk_freq = 675000;
5321 } else if (IS_CHERRYVIEW(dev)) {
5322 dev_priv->max_cdclk_freq = 320000;
5323 } else if (IS_VALLEYVIEW(dev)) {
5324 dev_priv->max_cdclk_freq = 400000;
5326 /* otherwise assume cdclk is fixed */
5327 dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
5330 dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
5332 DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
5333 dev_priv->max_cdclk_freq);
5335 DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n",
5336 dev_priv->max_dotclk_freq);
5339 static void intel_update_cdclk(struct drm_device *dev)
5341 struct drm_i915_private *dev_priv = dev->dev_private;
5343 dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
5345 if (INTEL_GEN(dev_priv) >= 9)
5346 DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz, VCO: %d kHz, ref: %d kHz\n",
5347 dev_priv->cdclk_freq, dev_priv->cdclk_pll.vco,
5348 dev_priv->cdclk_pll.ref);
5350 DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
5351 dev_priv->cdclk_freq);
5354 * 9:0 CMBUS [sic] CDCLK frequency (cdfreq):
5355 * Programmng [sic] note: bit[9:2] should be programmed to the number
5356 * of cdclk that generates 4MHz reference clock freq which is used to
5357 * generate GMBus clock. This will vary with the cdclk freq.
5359 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
5360 I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
5363 /* convert from kHz to .1 fixpoint MHz with -1MHz offset */
5364 static int skl_cdclk_decimal(int cdclk)
5366 return DIV_ROUND_CLOSEST(cdclk - 1000, 500);
5369 static int bxt_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
5373 if (cdclk == dev_priv->cdclk_pll.ref)
5378 MISSING_CASE(cdclk);
5390 return dev_priv->cdclk_pll.ref * ratio;
5393 static void bxt_de_pll_disable(struct drm_i915_private *dev_priv)
5395 I915_WRITE(BXT_DE_PLL_ENABLE, 0);
5398 if (wait_for((I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) == 0, 1))
5399 DRM_ERROR("timeout waiting for DE PLL unlock\n");
5401 dev_priv->cdclk_pll.vco = 0;
5404 static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
5406 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk_pll.ref);
5409 val = I915_READ(BXT_DE_PLL_CTL);
5410 val &= ~BXT_DE_PLL_RATIO_MASK;
5411 val |= BXT_DE_PLL_RATIO(ratio);
5412 I915_WRITE(BXT_DE_PLL_CTL, val);
5414 I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
5417 if (wait_for((I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) != 0, 1))
5418 DRM_ERROR("timeout waiting for DE PLL lock\n");
5420 dev_priv->cdclk_pll.vco = vco;
5423 static void bxt_set_cdclk(struct drm_i915_private *dev_priv, int cdclk)
5428 vco = bxt_de_pll_vco(dev_priv, cdclk);
5430 DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz (VCO %d kHz)\n", cdclk, vco);
5432 /* cdclk = vco / 2 / div{1,1.5,2,4} */
5433 switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
5435 divider = BXT_CDCLK_CD2X_DIV_SEL_4;
5438 divider = BXT_CDCLK_CD2X_DIV_SEL_2;
5441 divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
5444 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
5447 WARN_ON(cdclk != dev_priv->cdclk_pll.ref);
5450 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
5454 /* Inform power controller of upcoming frequency change */
5455 mutex_lock(&dev_priv->rps.hw_lock);
5456 ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
5458 mutex_unlock(&dev_priv->rps.hw_lock);
5461 DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n",
5466 if (dev_priv->cdclk_pll.vco != 0 &&
5467 dev_priv->cdclk_pll.vco != vco)
5468 bxt_de_pll_disable(dev_priv);
5470 if (dev_priv->cdclk_pll.vco != vco)
5471 bxt_de_pll_enable(dev_priv, vco);
5473 val = divider | skl_cdclk_decimal(cdclk);
5475 * FIXME if only the cd2x divider needs changing, it could be done
5476 * without shutting off the pipe (if only one pipe is active).
5478 val |= BXT_CDCLK_CD2X_PIPE_NONE;
5480 * Disable SSA Precharge when CD clock frequency < 500 MHz,
5483 if (cdclk >= 500000)
5484 val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
5485 I915_WRITE(CDCLK_CTL, val);
5487 mutex_lock(&dev_priv->rps.hw_lock);
5488 ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
5489 DIV_ROUND_UP(cdclk, 25000));
5490 mutex_unlock(&dev_priv->rps.hw_lock);
5493 DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n",
5498 intel_update_cdclk(dev_priv->dev);
5501 static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
5503 u32 cdctl, expected;
5505 intel_update_cdclk(dev_priv->dev);
5507 if (dev_priv->cdclk_pll.vco == 0 ||
5508 dev_priv->cdclk_freq == dev_priv->cdclk_pll.ref)
5511 /* DPLL okay; verify the cdclock
5513 * Some BIOS versions leave an incorrect decimal frequency value and
5514 * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
5515 * so sanitize this register.
5517 cdctl = I915_READ(CDCLK_CTL);
5519 * Let's ignore the pipe field, since BIOS could have configured the
5520 * dividers both synching to an active pipe, or asynchronously
5523 cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE;
5525 expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) |
5526 skl_cdclk_decimal(dev_priv->cdclk_freq);
5528 * Disable SSA Precharge when CD clock frequency < 500 MHz,
5531 if (dev_priv->cdclk_freq >= 500000)
5532 expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
5534 if (cdctl == expected)
5535 /* All well; nothing to sanitize */
5539 DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
5541 /* force cdclk programming */
5542 dev_priv->cdclk_freq = 0;
5544 /* force full PLL disable + enable */
5545 dev_priv->cdclk_pll.vco = -1;
5548 void bxt_init_cdclk(struct drm_i915_private *dev_priv)
5550 bxt_sanitize_cdclk(dev_priv);
5552 if (dev_priv->cdclk_freq != 0 && dev_priv->cdclk_pll.vco != 0)
5557 * - The initial CDCLK needs to be read from VBT.
5558 * Need to make this change after VBT has changes for BXT.
5560 bxt_set_cdclk(dev_priv, bxt_calc_cdclk(0));
5563 void bxt_uninit_cdclk(struct drm_i915_private *dev_priv)
5565 bxt_set_cdclk(dev_priv, dev_priv->cdclk_pll.ref);
5568 static int skl_calc_cdclk(int max_pixclk, int vco)
5570 if (vco == 8640000) {
5571 if (max_pixclk > 540000)
5573 else if (max_pixclk > 432000)
5575 else if (max_pixclk > 308571)
5580 if (max_pixclk > 540000)
5582 else if (max_pixclk > 450000)
5584 else if (max_pixclk > 337500)
5592 skl_dpll0_update(struct drm_i915_private *dev_priv)
5596 dev_priv->cdclk_pll.ref = 24000;
5597 dev_priv->cdclk_pll.vco = 0;
5599 val = I915_READ(LCPLL1_CTL);
5600 if ((val & LCPLL_PLL_ENABLE) == 0)
5603 if (WARN_ON((val & LCPLL_PLL_LOCK) == 0))
5606 val = I915_READ(DPLL_CTRL1);
5608 if (WARN_ON((val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
5609 DPLL_CTRL1_SSC(SKL_DPLL0) |
5610 DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
5611 DPLL_CTRL1_OVERRIDE(SKL_DPLL0)))
5614 switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) {
5615 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0):
5616 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0):
5617 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0):
5618 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0):
5619 dev_priv->cdclk_pll.vco = 8100000;
5621 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0):
5622 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0):
5623 dev_priv->cdclk_pll.vco = 8640000;
5626 MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
5631 void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv, int vco)
5633 bool changed = dev_priv->skl_preferred_vco_freq != vco;
5635 dev_priv->skl_preferred_vco_freq = vco;
5638 intel_update_max_cdclk(dev_priv->dev);
5642 skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
5644 int min_cdclk = skl_calc_cdclk(0, vco);
5647 WARN_ON(vco != 8100000 && vco != 8640000);
5649 /* select the minimum CDCLK before enabling DPLL 0 */
5650 val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_cdclk);
5651 I915_WRITE(CDCLK_CTL, val);
5652 POSTING_READ(CDCLK_CTL);
5655 * We always enable DPLL0 with the lowest link rate possible, but still
5656 * taking into account the VCO required to operate the eDP panel at the
5657 * desired frequency. The usual DP link rates operate with a VCO of
5658 * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
5659 * The modeset code is responsible for the selection of the exact link
5660 * rate later on, with the constraint of choosing a frequency that
5663 val = I915_READ(DPLL_CTRL1);
5665 val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
5666 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
5667 val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
5669 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
5672 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
5675 I915_WRITE(DPLL_CTRL1, val);
5676 POSTING_READ(DPLL_CTRL1);
5678 I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
5680 if (wait_for(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK, 5))
5681 DRM_ERROR("DPLL0 not locked\n");
5683 dev_priv->cdclk_pll.vco = vco;
5685 /* We'll want to keep using the current vco from now on. */
5686 skl_set_preferred_cdclk_vco(dev_priv, vco);
5690 skl_dpll0_disable(struct drm_i915_private *dev_priv)
5692 I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
5693 if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
5694 DRM_ERROR("Couldn't disable DPLL0\n");
5696 dev_priv->cdclk_pll.vco = 0;
5699 static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
5704 /* inform PCU we want to change CDCLK */
5705 val = SKL_CDCLK_PREPARE_FOR_CHANGE;
5706 mutex_lock(&dev_priv->rps.hw_lock);
5707 ret = sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &val);
5708 mutex_unlock(&dev_priv->rps.hw_lock);
5710 return ret == 0 && (val & SKL_CDCLK_READY_FOR_CHANGE);
5713 static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
5717 for (i = 0; i < 15; i++) {
5718 if (skl_cdclk_pcu_ready(dev_priv))
5726 static void skl_set_cdclk(struct drm_i915_private *dev_priv, int cdclk, int vco)
5728 struct drm_device *dev = dev_priv->dev;
5729 u32 freq_select, pcu_ack;
5731 WARN_ON((cdclk == 24000) != (vco == 0));
5733 DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz (VCO %d kHz)\n", cdclk, vco);
5735 if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
5736 DRM_ERROR("failed to inform PCU about cdclk change\n");
5744 freq_select = CDCLK_FREQ_450_432;
5748 freq_select = CDCLK_FREQ_540;
5754 freq_select = CDCLK_FREQ_337_308;
5759 freq_select = CDCLK_FREQ_675_617;
5764 if (dev_priv->cdclk_pll.vco != 0 &&
5765 dev_priv->cdclk_pll.vco != vco)
5766 skl_dpll0_disable(dev_priv);
5768 if (dev_priv->cdclk_pll.vco != vco)
5769 skl_dpll0_enable(dev_priv, vco);
5771 I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(cdclk));
5772 POSTING_READ(CDCLK_CTL);
5774 /* inform PCU of the change */
5775 mutex_lock(&dev_priv->rps.hw_lock);
5776 sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
5777 mutex_unlock(&dev_priv->rps.hw_lock);
5779 intel_update_cdclk(dev);
5782 static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv);
5784 void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
5786 skl_set_cdclk(dev_priv, dev_priv->cdclk_pll.ref, 0);
5789 void skl_init_cdclk(struct drm_i915_private *dev_priv)
5793 skl_sanitize_cdclk(dev_priv);
5795 if (dev_priv->cdclk_freq != 0 && dev_priv->cdclk_pll.vco != 0) {
5797 * Use the current vco as our initial
5798 * guess as to what the preferred vco is.
5800 if (dev_priv->skl_preferred_vco_freq == 0)
5801 skl_set_preferred_cdclk_vco(dev_priv,
5802 dev_priv->cdclk_pll.vco);
5806 vco = dev_priv->skl_preferred_vco_freq;
5809 cdclk = skl_calc_cdclk(0, vco);
5811 skl_set_cdclk(dev_priv, cdclk, vco);
5814 static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
5816 uint32_t cdctl, expected;
5819 * check if the pre-os intialized the display
5820 * There is SWF18 scratchpad register defined which is set by the
5821 * pre-os which can be used by the OS drivers to check the status
5823 if ((I915_READ(SWF_ILK(0x18)) & 0x00FFFFFF) == 0)
5826 intel_update_cdclk(dev_priv->dev);
5827 /* Is PLL enabled and locked ? */
5828 if (dev_priv->cdclk_pll.vco == 0 ||
5829 dev_priv->cdclk_freq == dev_priv->cdclk_pll.ref)
5832 /* DPLL okay; verify the cdclock
5834 * Noticed in some instances that the freq selection is correct but
5835 * decimal part is programmed wrong from BIOS where pre-os does not
5836 * enable display. Verify the same as well.
5838 cdctl = I915_READ(CDCLK_CTL);
5839 expected = (cdctl & CDCLK_FREQ_SEL_MASK) |
5840 skl_cdclk_decimal(dev_priv->cdclk_freq);
5841 if (cdctl == expected)
5842 /* All well; nothing to sanitize */
5846 DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
5848 /* force cdclk programming */
5849 dev_priv->cdclk_freq = 0;
5850 /* force full PLL disable + enable */
5851 dev_priv->cdclk_pll.vco = -1;
5854 /* Adjust CDclk dividers to allow high res or save power if possible */
5855 static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
5857 struct drm_i915_private *dev_priv = dev->dev_private;
5860 WARN_ON(dev_priv->display.get_display_clock_speed(dev)
5861 != dev_priv->cdclk_freq);
5863 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
5865 else if (cdclk == 266667)
5870 mutex_lock(&dev_priv->rps.hw_lock);
5871 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
5872 val &= ~DSPFREQGUAR_MASK;
5873 val |= (cmd << DSPFREQGUAR_SHIFT);
5874 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
5875 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
5876 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
5878 DRM_ERROR("timed out waiting for CDclk change\n");
5880 mutex_unlock(&dev_priv->rps.hw_lock);
5882 mutex_lock(&dev_priv->sb_lock);
5884 if (cdclk == 400000) {
5887 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
5889 /* adjust cdclk divider */
5890 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
5891 val &= ~CCK_FREQUENCY_VALUES;
5893 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
5895 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
5896 CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
5898 DRM_ERROR("timed out waiting for CDclk change\n");
5901 /* adjust self-refresh exit latency value */
5902 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
5906 * For high bandwidth configs, we set a higher latency in the bunit
5907 * so that the core display fetch happens in time to avoid underruns.
5909 if (cdclk == 400000)
5910 val |= 4500 / 250; /* 4.5 usec */
5912 val |= 3000 / 250; /* 3.0 usec */
5913 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
5915 mutex_unlock(&dev_priv->sb_lock);
5917 intel_update_cdclk(dev);
5920 static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
5922 struct drm_i915_private *dev_priv = dev->dev_private;
5925 WARN_ON(dev_priv->display.get_display_clock_speed(dev)
5926 != dev_priv->cdclk_freq);
5935 MISSING_CASE(cdclk);
5940 * Specs are full of misinformation, but testing on actual
5941 * hardware has shown that we just need to write the desired
5942 * CCK divider into the Punit register.
5944 cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
5946 mutex_lock(&dev_priv->rps.hw_lock);
5947 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
5948 val &= ~DSPFREQGUAR_MASK_CHV;
5949 val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
5950 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
5951 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
5952 DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
5954 DRM_ERROR("timed out waiting for CDclk change\n");
5956 mutex_unlock(&dev_priv->rps.hw_lock);
5958 intel_update_cdclk(dev);
5961 static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
5964 int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 333333 : 320000;
5965 int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90;
5968 * Really only a few cases to deal with, as only 4 CDclks are supported:
5971 * 320/333MHz (depends on HPLL freq)
5973 * So we check to see whether we're above 90% (VLV) or 95% (CHV)
5974 * of the lower bin and adjust if needed.
5976 * We seem to get an unstable or solid color picture at 200MHz.
5977 * Not sure what's wrong. For now use 200MHz only when all pipes
5980 if (!IS_CHERRYVIEW(dev_priv) &&
5981 max_pixclk > freq_320*limit/100)
5983 else if (max_pixclk > 266667*limit/100)
5985 else if (max_pixclk > 0)
5991 static int bxt_calc_cdclk(int max_pixclk)
5993 if (max_pixclk > 576000)
5995 else if (max_pixclk > 384000)
5997 else if (max_pixclk > 288000)
5999 else if (max_pixclk > 144000)
6005 /* Compute the max pixel clock for new configuration. */
6006 static int intel_mode_max_pixclk(struct drm_device *dev,
6007 struct drm_atomic_state *state)
6009 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
6010 struct drm_i915_private *dev_priv = dev->dev_private;
6011 struct drm_crtc *crtc;
6012 struct drm_crtc_state *crtc_state;
6013 unsigned max_pixclk = 0, i;
6016 memcpy(intel_state->min_pixclk, dev_priv->min_pixclk,
6017 sizeof(intel_state->min_pixclk));
6019 for_each_crtc_in_state(state, crtc, crtc_state, i) {
6022 if (crtc_state->enable)
6023 pixclk = crtc_state->adjusted_mode.crtc_clock;
6025 intel_state->min_pixclk[i] = pixclk;
6028 for_each_pipe(dev_priv, pipe)
6029 max_pixclk = max(intel_state->min_pixclk[pipe], max_pixclk);
6034 static int valleyview_modeset_calc_cdclk(struct drm_atomic_state *state)
6036 struct drm_device *dev = state->dev;
6037 struct drm_i915_private *dev_priv = dev->dev_private;
6038 int max_pixclk = intel_mode_max_pixclk(dev, state);
6039 struct intel_atomic_state *intel_state =
6040 to_intel_atomic_state(state);
6042 intel_state->cdclk = intel_state->dev_cdclk =
6043 valleyview_calc_cdclk(dev_priv, max_pixclk);
6045 if (!intel_state->active_crtcs)
6046 intel_state->dev_cdclk = valleyview_calc_cdclk(dev_priv, 0);
6051 static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state)
6053 int max_pixclk = ilk_max_pixel_rate(state);
6054 struct intel_atomic_state *intel_state =
6055 to_intel_atomic_state(state);
6057 intel_state->cdclk = intel_state->dev_cdclk =
6058 bxt_calc_cdclk(max_pixclk);
6060 if (!intel_state->active_crtcs)
6061 intel_state->dev_cdclk = bxt_calc_cdclk(0);
6066 static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
6068 unsigned int credits, default_credits;
6070 if (IS_CHERRYVIEW(dev_priv))
6071 default_credits = PFI_CREDIT(12);
6073 default_credits = PFI_CREDIT(8);
6075 if (dev_priv->cdclk_freq >= dev_priv->czclk_freq) {
6076 /* CHV suggested value is 31 or 63 */
6077 if (IS_CHERRYVIEW(dev_priv))
6078 credits = PFI_CREDIT_63;
6080 credits = PFI_CREDIT(15);
6082 credits = default_credits;
6086 * WA - write default credits before re-programming
6087 * FIXME: should we also set the resend bit here?
6089 I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
6092 I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
6093 credits | PFI_CREDIT_RESEND);
6096 * FIXME is this guaranteed to clear
6097 * immediately or should we poll for it?
6099 WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND);
6102 static void valleyview_modeset_commit_cdclk(struct drm_atomic_state *old_state)
6104 struct drm_device *dev = old_state->dev;
6105 struct drm_i915_private *dev_priv = dev->dev_private;
6106 struct intel_atomic_state *old_intel_state =
6107 to_intel_atomic_state(old_state);
6108 unsigned req_cdclk = old_intel_state->dev_cdclk;
6111 * FIXME: We can end up here with all power domains off, yet
6112 * with a CDCLK frequency other than the minimum. To account
6113 * for this take the PIPE-A power domain, which covers the HW
6114 * blocks needed for the following programming. This can be
6115 * removed once it's guaranteed that we get here either with
6116 * the minimum CDCLK set, or the required power domains
6119 intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
6121 if (IS_CHERRYVIEW(dev))
6122 cherryview_set_cdclk(dev, req_cdclk);
6124 valleyview_set_cdclk(dev, req_cdclk);
6126 vlv_program_pfi_credits(dev_priv);
6128 intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
6131 static void valleyview_crtc_enable(struct drm_crtc *crtc)
6133 struct drm_device *dev = crtc->dev;
6134 struct drm_i915_private *dev_priv = to_i915(dev);
6135 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6136 struct intel_encoder *encoder;
6137 struct intel_crtc_state *pipe_config =
6138 to_intel_crtc_state(crtc->state);
6139 int pipe = intel_crtc->pipe;
6141 if (WARN_ON(intel_crtc->active))
6144 if (intel_crtc->config->has_dp_encoder)
6145 intel_dp_set_m_n(intel_crtc, M1_N1);
6147 intel_set_pipe_timings(intel_crtc);
6148 intel_set_pipe_src_size(intel_crtc);
6150 if (IS_CHERRYVIEW(dev) && pipe == PIPE_B) {
6151 struct drm_i915_private *dev_priv = dev->dev_private;
6153 I915_WRITE(CHV_BLEND(pipe), CHV_BLEND_LEGACY);
6154 I915_WRITE(CHV_CANVAS(pipe), 0);
6157 i9xx_set_pipeconf(intel_crtc);
6159 intel_crtc->active = true;
6161 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6163 for_each_encoder_on_crtc(dev, crtc, encoder)
6164 if (encoder->pre_pll_enable)
6165 encoder->pre_pll_enable(encoder);
6167 if (IS_CHERRYVIEW(dev)) {
6168 chv_prepare_pll(intel_crtc, intel_crtc->config);
6169 chv_enable_pll(intel_crtc, intel_crtc->config);
6171 vlv_prepare_pll(intel_crtc, intel_crtc->config);
6172 vlv_enable_pll(intel_crtc, intel_crtc->config);
6175 for_each_encoder_on_crtc(dev, crtc, encoder)
6176 if (encoder->pre_enable)
6177 encoder->pre_enable(encoder);
6179 i9xx_pfit_enable(intel_crtc);
6181 intel_color_load_luts(&pipe_config->base);
6183 intel_update_watermarks(crtc);
6184 intel_enable_pipe(intel_crtc);
6186 assert_vblank_disabled(crtc);
6187 drm_crtc_vblank_on(crtc);
6189 for_each_encoder_on_crtc(dev, crtc, encoder)
6190 encoder->enable(encoder);
6193 static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
6195 struct drm_device *dev = crtc->base.dev;
6196 struct drm_i915_private *dev_priv = dev->dev_private;
6198 I915_WRITE(FP0(crtc->pipe), crtc->config->dpll_hw_state.fp0);
6199 I915_WRITE(FP1(crtc->pipe), crtc->config->dpll_hw_state.fp1);
6202 static void i9xx_crtc_enable(struct drm_crtc *crtc)
6204 struct drm_device *dev = crtc->dev;
6205 struct drm_i915_private *dev_priv = to_i915(dev);
6206 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6207 struct intel_encoder *encoder;
6208 struct intel_crtc_state *pipe_config =
6209 to_intel_crtc_state(crtc->state);
6210 enum pipe pipe = intel_crtc->pipe;
6212 if (WARN_ON(intel_crtc->active))
6215 i9xx_set_pll_dividers(intel_crtc);
6217 if (intel_crtc->config->has_dp_encoder)
6218 intel_dp_set_m_n(intel_crtc, M1_N1);
6220 intel_set_pipe_timings(intel_crtc);
6221 intel_set_pipe_src_size(intel_crtc);
6223 i9xx_set_pipeconf(intel_crtc);
6225 intel_crtc->active = true;
6228 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6230 for_each_encoder_on_crtc(dev, crtc, encoder)
6231 if (encoder->pre_enable)
6232 encoder->pre_enable(encoder);
6234 i9xx_enable_pll(intel_crtc);
6236 i9xx_pfit_enable(intel_crtc);
6238 intel_color_load_luts(&pipe_config->base);
6240 intel_update_watermarks(crtc);
6241 intel_enable_pipe(intel_crtc);
6243 assert_vblank_disabled(crtc);
6244 drm_crtc_vblank_on(crtc);
6246 for_each_encoder_on_crtc(dev, crtc, encoder)
6247 encoder->enable(encoder);
6250 static void i9xx_pfit_disable(struct intel_crtc *crtc)
6252 struct drm_device *dev = crtc->base.dev;
6253 struct drm_i915_private *dev_priv = dev->dev_private;
6255 if (!crtc->config->gmch_pfit.control)
6258 assert_pipe_disabled(dev_priv, crtc->pipe);
6260 DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
6261 I915_READ(PFIT_CONTROL));
6262 I915_WRITE(PFIT_CONTROL, 0);
6265 static void i9xx_crtc_disable(struct drm_crtc *crtc)
6267 struct drm_device *dev = crtc->dev;
6268 struct drm_i915_private *dev_priv = dev->dev_private;
6269 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6270 struct intel_encoder *encoder;
6271 int pipe = intel_crtc->pipe;
6274 * On gen2 planes are double buffered but the pipe isn't, so we must
6275 * wait for planes to fully turn off before disabling the pipe.
6278 intel_wait_for_vblank(dev, pipe);
6280 for_each_encoder_on_crtc(dev, crtc, encoder)
6281 encoder->disable(encoder);
6283 drm_crtc_vblank_off(crtc);
6284 assert_vblank_disabled(crtc);
6286 intel_disable_pipe(intel_crtc);
6288 i9xx_pfit_disable(intel_crtc);
6290 for_each_encoder_on_crtc(dev, crtc, encoder)
6291 if (encoder->post_disable)
6292 encoder->post_disable(encoder);
6294 if (!intel_crtc->config->has_dsi_encoder) {
6295 if (IS_CHERRYVIEW(dev))
6296 chv_disable_pll(dev_priv, pipe);
6297 else if (IS_VALLEYVIEW(dev))
6298 vlv_disable_pll(dev_priv, pipe);
6300 i9xx_disable_pll(intel_crtc);
6303 for_each_encoder_on_crtc(dev, crtc, encoder)
6304 if (encoder->post_pll_disable)
6305 encoder->post_pll_disable(encoder);
6308 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
6311 static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
6313 struct intel_encoder *encoder;
6314 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6315 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
6316 enum intel_display_power_domain domain;
6317 unsigned long domains;
6319 if (!intel_crtc->active)
6322 if (to_intel_plane_state(crtc->primary->state)->visible) {
6323 WARN_ON(intel_crtc->flip_work);
6325 intel_pre_disable_primary_noatomic(crtc);
6327 intel_crtc_disable_planes(crtc, 1 << drm_plane_index(crtc->primary));
6328 to_intel_plane_state(crtc->primary->state)->visible = false;
6331 dev_priv->display.crtc_disable(crtc);
6333 DRM_DEBUG_KMS("[CRTC:%d:%s] hw state adjusted, was enabled, now disabled\n",
6334 crtc->base.id, crtc->name);
6336 WARN_ON(drm_atomic_set_mode_for_crtc(crtc->state, NULL) < 0);
6337 crtc->state->active = false;
6338 intel_crtc->active = false;
6339 crtc->enabled = false;
6340 crtc->state->connector_mask = 0;
6341 crtc->state->encoder_mask = 0;
6343 for_each_encoder_on_crtc(crtc->dev, crtc, encoder)
6344 encoder->base.crtc = NULL;
6346 intel_fbc_disable(intel_crtc);
6347 intel_update_watermarks(crtc);
6348 intel_disable_shared_dpll(intel_crtc);
6350 domains = intel_crtc->enabled_power_domains;
6351 for_each_power_domain(domain, domains)
6352 intel_display_power_put(dev_priv, domain);
6353 intel_crtc->enabled_power_domains = 0;
6355 dev_priv->active_crtcs &= ~(1 << intel_crtc->pipe);
6356 dev_priv->min_pixclk[intel_crtc->pipe] = 0;
6360 * turn all crtc's off, but do not adjust state
6361 * This has to be paired with a call to intel_modeset_setup_hw_state.
6363 int intel_display_suspend(struct drm_device *dev)
6365 struct drm_i915_private *dev_priv = to_i915(dev);
6366 struct drm_atomic_state *state;
6369 state = drm_atomic_helper_suspend(dev);
6370 ret = PTR_ERR_OR_ZERO(state);
6372 DRM_ERROR("Suspending crtc's failed with %i\n", ret);
6374 dev_priv->modeset_restore_state = state;
6378 void intel_encoder_destroy(struct drm_encoder *encoder)
6380 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
6382 drm_encoder_cleanup(encoder);
6383 kfree(intel_encoder);
6386 /* Cross check the actual hw state with our own modeset state tracking (and it's
6387 * internal consistency). */
6388 static void intel_connector_verify_state(struct intel_connector *connector)
6390 struct drm_crtc *crtc = connector->base.state->crtc;
6392 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
6393 connector->base.base.id,
6394 connector->base.name);
6396 if (connector->get_hw_state(connector)) {
6397 struct intel_encoder *encoder = connector->encoder;
6398 struct drm_connector_state *conn_state = connector->base.state;
6400 I915_STATE_WARN(!crtc,
6401 "connector enabled without attached crtc\n");
6406 I915_STATE_WARN(!crtc->state->active,
6407 "connector is active, but attached crtc isn't\n");
6409 if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
6412 I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
6413 "atomic encoder doesn't match attached encoder\n");
6415 I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
6416 "attached encoder crtc differs from connector crtc\n");
6418 I915_STATE_WARN(crtc && crtc->state->active,
6419 "attached crtc is active, but connector isn't\n");
6420 I915_STATE_WARN(!crtc && connector->base.state->best_encoder,
6421 "best encoder set without crtc!\n");
6425 int intel_connector_init(struct intel_connector *connector)
6427 drm_atomic_helper_connector_reset(&connector->base);
6429 if (!connector->base.state)
6435 struct intel_connector *intel_connector_alloc(void)
6437 struct intel_connector *connector;
6439 connector = kzalloc(sizeof *connector, GFP_KERNEL);
6443 if (intel_connector_init(connector) < 0) {
6451 /* Simple connector->get_hw_state implementation for encoders that support only
6452 * one connector and no cloning and hence the encoder state determines the state
6453 * of the connector. */
6454 bool intel_connector_get_hw_state(struct intel_connector *connector)
6457 struct intel_encoder *encoder = connector->encoder;
6459 return encoder->get_hw_state(encoder, &pipe);
6462 static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
6464 if (crtc_state->base.enable && crtc_state->has_pch_encoder)
6465 return crtc_state->fdi_lanes;
6470 static int ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
6471 struct intel_crtc_state *pipe_config)
6473 struct drm_atomic_state *state = pipe_config->base.state;
6474 struct intel_crtc *other_crtc;
6475 struct intel_crtc_state *other_crtc_state;
6477 DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
6478 pipe_name(pipe), pipe_config->fdi_lanes);
6479 if (pipe_config->fdi_lanes > 4) {
6480 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
6481 pipe_name(pipe), pipe_config->fdi_lanes);
6485 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
6486 if (pipe_config->fdi_lanes > 2) {
6487 DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
6488 pipe_config->fdi_lanes);
6495 if (INTEL_INFO(dev)->num_pipes == 2)
6498 /* Ivybridge 3 pipe is really complicated */
6503 if (pipe_config->fdi_lanes <= 2)
6506 other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_C));
6508 intel_atomic_get_crtc_state(state, other_crtc);
6509 if (IS_ERR(other_crtc_state))
6510 return PTR_ERR(other_crtc_state);
6512 if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
6513 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
6514 pipe_name(pipe), pipe_config->fdi_lanes);
6519 if (pipe_config->fdi_lanes > 2) {
6520 DRM_DEBUG_KMS("only 2 lanes on pipe %c: required %i lanes\n",
6521 pipe_name(pipe), pipe_config->fdi_lanes);
6525 other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_B));
6527 intel_atomic_get_crtc_state(state, other_crtc);
6528 if (IS_ERR(other_crtc_state))
6529 return PTR_ERR(other_crtc_state);
6531 if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
6532 DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
6542 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
6543 struct intel_crtc_state *pipe_config)
6545 struct drm_device *dev = intel_crtc->base.dev;
6546 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
6547 int lane, link_bw, fdi_dotclock, ret;
6548 bool needs_recompute = false;
6551 /* FDI is a binary signal running at ~2.7GHz, encoding
6552 * each output octet as 10 bits. The actual frequency
6553 * is stored as a divider into a 100MHz clock, and the
6554 * mode pixel clock is stored in units of 1KHz.
6555 * Hence the bw of each lane in terms of the mode signal
6558 link_bw = intel_fdi_link_freq(to_i915(dev), pipe_config);
6560 fdi_dotclock = adjusted_mode->crtc_clock;
6562 lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
6563 pipe_config->pipe_bpp);
6565 pipe_config->fdi_lanes = lane;
6567 intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
6568 link_bw, &pipe_config->fdi_m_n);
6570 ret = ironlake_check_fdi_lanes(dev, intel_crtc->pipe, pipe_config);
6571 if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
6572 pipe_config->pipe_bpp -= 2*3;
6573 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
6574 pipe_config->pipe_bpp);
6575 needs_recompute = true;
6576 pipe_config->bw_constrained = true;
6581 if (needs_recompute)
6587 static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
6588 struct intel_crtc_state *pipe_config)
6590 if (pipe_config->pipe_bpp > 24)
6593 /* HSW can handle pixel rate up to cdclk? */
6594 if (IS_HASWELL(dev_priv))
6598 * We compare against max which means we must take
6599 * the increased cdclk requirement into account when
6600 * calculating the new cdclk.
6602 * Should measure whether using a lower cdclk w/o IPS
6604 return ilk_pipe_pixel_rate(pipe_config) <=
6605 dev_priv->max_cdclk_freq * 95 / 100;
6608 static void hsw_compute_ips_config(struct intel_crtc *crtc,
6609 struct intel_crtc_state *pipe_config)
6611 struct drm_device *dev = crtc->base.dev;
6612 struct drm_i915_private *dev_priv = dev->dev_private;
6614 pipe_config->ips_enabled = i915.enable_ips &&
6615 hsw_crtc_supports_ips(crtc) &&
6616 pipe_config_supports_ips(dev_priv, pipe_config);
6619 static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc)
6621 const struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6623 /* GDG double wide on either pipe, otherwise pipe A only */
6624 return INTEL_INFO(dev_priv)->gen < 4 &&
6625 (crtc->pipe == PIPE_A || IS_I915G(dev_priv));
6628 static int intel_crtc_compute_config(struct intel_crtc *crtc,
6629 struct intel_crtc_state *pipe_config)
6631 struct drm_device *dev = crtc->base.dev;
6632 struct drm_i915_private *dev_priv = dev->dev_private;
6633 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
6634 int clock_limit = dev_priv->max_dotclk_freq;
6636 if (INTEL_INFO(dev)->gen < 4) {
6637 clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
6640 * Enable double wide mode when the dot clock
6641 * is > 90% of the (display) core speed.
6643 if (intel_crtc_supports_double_wide(crtc) &&
6644 adjusted_mode->crtc_clock > clock_limit) {
6645 clock_limit = dev_priv->max_dotclk_freq;
6646 pipe_config->double_wide = true;
6650 if (adjusted_mode->crtc_clock > clock_limit) {
6651 DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
6652 adjusted_mode->crtc_clock, clock_limit,
6653 yesno(pipe_config->double_wide));
6658 * Pipe horizontal size must be even in:
6660 * - LVDS dual channel mode
6661 * - Double wide pipe
6663 if ((intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_LVDS) &&
6664 intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
6665 pipe_config->pipe_src_w &= ~1;
6667 /* Cantiga+ cannot handle modes with a hsync front porch of 0.
6668 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
6670 if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
6671 adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
6675 hsw_compute_ips_config(crtc, pipe_config);
6677 if (pipe_config->has_pch_encoder)
6678 return ironlake_fdi_compute_config(crtc, pipe_config);
6683 static int skylake_get_display_clock_speed(struct drm_device *dev)
6685 struct drm_i915_private *dev_priv = to_i915(dev);
6688 skl_dpll0_update(dev_priv);
6690 if (dev_priv->cdclk_pll.vco == 0)
6691 return dev_priv->cdclk_pll.ref;
6693 cdctl = I915_READ(CDCLK_CTL);
6695 if (dev_priv->cdclk_pll.vco == 8640000) {
6696 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
6697 case CDCLK_FREQ_450_432:
6699 case CDCLK_FREQ_337_308:
6701 case CDCLK_FREQ_540:
6703 case CDCLK_FREQ_675_617:
6706 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
6709 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
6710 case CDCLK_FREQ_450_432:
6712 case CDCLK_FREQ_337_308:
6714 case CDCLK_FREQ_540:
6716 case CDCLK_FREQ_675_617:
6719 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
6723 return dev_priv->cdclk_pll.ref;
6726 static void bxt_de_pll_update(struct drm_i915_private *dev_priv)
6730 dev_priv->cdclk_pll.ref = 19200;
6731 dev_priv->cdclk_pll.vco = 0;
6733 val = I915_READ(BXT_DE_PLL_ENABLE);
6734 if ((val & BXT_DE_PLL_PLL_ENABLE) == 0)
6737 if (WARN_ON((val & BXT_DE_PLL_LOCK) == 0))
6740 val = I915_READ(BXT_DE_PLL_CTL);
6741 dev_priv->cdclk_pll.vco = (val & BXT_DE_PLL_RATIO_MASK) *
6742 dev_priv->cdclk_pll.ref;
6745 static int broxton_get_display_clock_speed(struct drm_device *dev)
6747 struct drm_i915_private *dev_priv = to_i915(dev);
6751 bxt_de_pll_update(dev_priv);
6753 vco = dev_priv->cdclk_pll.vco;
6755 return dev_priv->cdclk_pll.ref;
6757 divider = I915_READ(CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK;
6760 case BXT_CDCLK_CD2X_DIV_SEL_1:
6763 case BXT_CDCLK_CD2X_DIV_SEL_1_5:
6766 case BXT_CDCLK_CD2X_DIV_SEL_2:
6769 case BXT_CDCLK_CD2X_DIV_SEL_4:
6773 MISSING_CASE(divider);
6774 return dev_priv->cdclk_pll.ref;
6777 return DIV_ROUND_CLOSEST(vco, div);
6780 static int broadwell_get_display_clock_speed(struct drm_device *dev)
6782 struct drm_i915_private *dev_priv = dev->dev_private;
6783 uint32_t lcpll = I915_READ(LCPLL_CTL);
6784 uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
6786 if (lcpll & LCPLL_CD_SOURCE_FCLK)
6788 else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
6790 else if (freq == LCPLL_CLK_FREQ_450)
6792 else if (freq == LCPLL_CLK_FREQ_54O_BDW)
6794 else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
6800 static int haswell_get_display_clock_speed(struct drm_device *dev)
6802 struct drm_i915_private *dev_priv = dev->dev_private;
6803 uint32_t lcpll = I915_READ(LCPLL_CTL);
6804 uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
6806 if (lcpll & LCPLL_CD_SOURCE_FCLK)
6808 else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
6810 else if (freq == LCPLL_CLK_FREQ_450)
6812 else if (IS_HSW_ULT(dev))
6818 static int valleyview_get_display_clock_speed(struct drm_device *dev)
6820 return vlv_get_cck_clock_hpll(to_i915(dev), "cdclk",
6821 CCK_DISPLAY_CLOCK_CONTROL);
6824 static int ilk_get_display_clock_speed(struct drm_device *dev)
6829 static int i945_get_display_clock_speed(struct drm_device *dev)
6834 static int i915_get_display_clock_speed(struct drm_device *dev)
6839 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
6844 static int pnv_get_display_clock_speed(struct drm_device *dev)
6848 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
6850 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
6851 case GC_DISPLAY_CLOCK_267_MHZ_PNV:
6853 case GC_DISPLAY_CLOCK_333_MHZ_PNV:
6855 case GC_DISPLAY_CLOCK_444_MHZ_PNV:
6857 case GC_DISPLAY_CLOCK_200_MHZ_PNV:
6860 DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
6861 case GC_DISPLAY_CLOCK_133_MHZ_PNV:
6863 case GC_DISPLAY_CLOCK_167_MHZ_PNV:
6868 static int i915gm_get_display_clock_speed(struct drm_device *dev)
6872 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
6874 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
6877 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
6878 case GC_DISPLAY_CLOCK_333_MHZ:
6881 case GC_DISPLAY_CLOCK_190_200_MHZ:
6887 static int i865_get_display_clock_speed(struct drm_device *dev)
6892 static int i85x_get_display_clock_speed(struct drm_device *dev)
6897 * 852GM/852GMV only supports 133 MHz and the HPLLCC
6898 * encoding is different :(
6899 * FIXME is this the right way to detect 852GM/852GMV?
6901 if (dev->pdev->revision == 0x1)
6904 pci_bus_read_config_word(dev->pdev->bus,
6905 PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
6907 /* Assume that the hardware is in the high speed state. This
6908 * should be the default.
6910 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
6911 case GC_CLOCK_133_200:
6912 case GC_CLOCK_133_200_2:
6913 case GC_CLOCK_100_200:
6915 case GC_CLOCK_166_250:
6917 case GC_CLOCK_100_133:
6919 case GC_CLOCK_133_266:
6920 case GC_CLOCK_133_266_2:
6921 case GC_CLOCK_166_266:
6925 /* Shouldn't happen */
6929 static int i830_get_display_clock_speed(struct drm_device *dev)
6934 static unsigned int intel_hpll_vco(struct drm_device *dev)
6936 struct drm_i915_private *dev_priv = dev->dev_private;
6937 static const unsigned int blb_vco[8] = {
6944 static const unsigned int pnv_vco[8] = {
6951 static const unsigned int cl_vco[8] = {
6960 static const unsigned int elk_vco[8] = {
6966 static const unsigned int ctg_vco[8] = {
6974 const unsigned int *vco_table;
6978 /* FIXME other chipsets? */
6980 vco_table = ctg_vco;
6981 else if (IS_G4X(dev))
6982 vco_table = elk_vco;
6983 else if (IS_CRESTLINE(dev))
6985 else if (IS_PINEVIEW(dev))
6986 vco_table = pnv_vco;
6987 else if (IS_G33(dev))
6988 vco_table = blb_vco;
6992 tmp = I915_READ(IS_MOBILE(dev) ? HPLLVCO_MOBILE : HPLLVCO);
6994 vco = vco_table[tmp & 0x7];
6996 DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp);
6998 DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco);
7003 static int gm45_get_display_clock_speed(struct drm_device *dev)
7005 unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
7008 pci_read_config_word(dev->pdev, GCFGC, &tmp);
7010 cdclk_sel = (tmp >> 12) & 0x1;
7016 return cdclk_sel ? 333333 : 222222;
7018 return cdclk_sel ? 320000 : 228571;
7020 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", vco, tmp);
7025 static int i965gm_get_display_clock_speed(struct drm_device *dev)
7027 static const uint8_t div_3200[] = { 16, 10, 8 };
7028 static const uint8_t div_4000[] = { 20, 12, 10 };
7029 static const uint8_t div_5333[] = { 24, 16, 14 };
7030 const uint8_t *div_table;
7031 unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
7034 pci_read_config_word(dev->pdev, GCFGC, &tmp);
7036 cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
7038 if (cdclk_sel >= ARRAY_SIZE(div_3200))
7043 div_table = div_3200;
7046 div_table = div_4000;
7049 div_table = div_5333;
7055 return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
7058 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", vco, tmp);
7062 static int g33_get_display_clock_speed(struct drm_device *dev)
7064 static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 };
7065 static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 };
7066 static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 };
7067 static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 };
7068 const uint8_t *div_table;
7069 unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
7072 pci_read_config_word(dev->pdev, GCFGC, &tmp);
7074 cdclk_sel = (tmp >> 4) & 0x7;
7076 if (cdclk_sel >= ARRAY_SIZE(div_3200))
7081 div_table = div_3200;
7084 div_table = div_4000;
7087 div_table = div_4800;
7090 div_table = div_5333;
7096 return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
7099 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", vco, tmp);
7104 intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
7106 while (*num > DATA_LINK_M_N_MASK ||
7107 *den > DATA_LINK_M_N_MASK) {
7113 static void compute_m_n(unsigned int m, unsigned int n,
7114 uint32_t *ret_m, uint32_t *ret_n)
7116 *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
7117 *ret_m = div_u64((uint64_t) m * *ret_n, n);
7118 intel_reduce_m_n_ratio(ret_m, ret_n);
7122 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
7123 int pixel_clock, int link_clock,
7124 struct intel_link_m_n *m_n)
7128 compute_m_n(bits_per_pixel * pixel_clock,
7129 link_clock * nlanes * 8,
7130 &m_n->gmch_m, &m_n->gmch_n);
7132 compute_m_n(pixel_clock, link_clock,
7133 &m_n->link_m, &m_n->link_n);
7136 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
7138 if (i915.panel_use_ssc >= 0)
7139 return i915.panel_use_ssc != 0;
7140 return dev_priv->vbt.lvds_use_ssc
7141 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
7144 static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
7146 return (1 << dpll->n) << 16 | dpll->m2;
7149 static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
7151 return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
7154 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
7155 struct intel_crtc_state *crtc_state,
7156 struct dpll *reduced_clock)
7158 struct drm_device *dev = crtc->base.dev;
7161 if (IS_PINEVIEW(dev)) {
7162 fp = pnv_dpll_compute_fp(&crtc_state->dpll);
7164 fp2 = pnv_dpll_compute_fp(reduced_clock);
7166 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
7168 fp2 = i9xx_dpll_compute_fp(reduced_clock);
7171 crtc_state->dpll_hw_state.fp0 = fp;
7173 crtc->lowfreq_avail = false;
7174 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7176 crtc_state->dpll_hw_state.fp1 = fp2;
7177 crtc->lowfreq_avail = true;
7179 crtc_state->dpll_hw_state.fp1 = fp;
7183 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
7189 * PLLB opamp always calibrates to max value of 0x3f, force enable it
7190 * and set it to a reasonable value instead.
7192 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
7193 reg_val &= 0xffffff00;
7194 reg_val |= 0x00000030;
7195 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
7197 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
7198 reg_val &= 0x8cffffff;
7199 reg_val = 0x8c000000;
7200 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
7202 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
7203 reg_val &= 0xffffff00;
7204 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
7206 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
7207 reg_val &= 0x00ffffff;
7208 reg_val |= 0xb0000000;
7209 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
7212 static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
7213 struct intel_link_m_n *m_n)
7215 struct drm_device *dev = crtc->base.dev;
7216 struct drm_i915_private *dev_priv = dev->dev_private;
7217 int pipe = crtc->pipe;
7219 I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
7220 I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
7221 I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
7222 I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
7225 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
7226 struct intel_link_m_n *m_n,
7227 struct intel_link_m_n *m2_n2)
7229 struct drm_device *dev = crtc->base.dev;
7230 struct drm_i915_private *dev_priv = dev->dev_private;
7231 int pipe = crtc->pipe;
7232 enum transcoder transcoder = crtc->config->cpu_transcoder;
7234 if (INTEL_INFO(dev)->gen >= 5) {
7235 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
7236 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
7237 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
7238 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
7239 /* M2_N2 registers to be set only for gen < 8 (M2_N2 available
7240 * for gen < 8) and if DRRS is supported (to make sure the
7241 * registers are not unnecessarily accessed).
7243 if (m2_n2 && (IS_CHERRYVIEW(dev) || INTEL_INFO(dev)->gen < 8) &&
7244 crtc->config->has_drrs) {
7245 I915_WRITE(PIPE_DATA_M2(transcoder),
7246 TU_SIZE(m2_n2->tu) | m2_n2->gmch_m);
7247 I915_WRITE(PIPE_DATA_N2(transcoder), m2_n2->gmch_n);
7248 I915_WRITE(PIPE_LINK_M2(transcoder), m2_n2->link_m);
7249 I915_WRITE(PIPE_LINK_N2(transcoder), m2_n2->link_n);
7252 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
7253 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
7254 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
7255 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
7259 void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n)
7261 struct intel_link_m_n *dp_m_n, *dp_m2_n2 = NULL;
7264 dp_m_n = &crtc->config->dp_m_n;
7265 dp_m2_n2 = &crtc->config->dp_m2_n2;
7266 } else if (m_n == M2_N2) {
7269 * M2_N2 registers are not supported. Hence m2_n2 divider value
7270 * needs to be programmed into M1_N1.
7272 dp_m_n = &crtc->config->dp_m2_n2;
7274 DRM_ERROR("Unsupported divider value\n");
7278 if (crtc->config->has_pch_encoder)
7279 intel_pch_transcoder_set_m_n(crtc, &crtc->config->dp_m_n);
7281 intel_cpu_transcoder_set_m_n(crtc, dp_m_n, dp_m2_n2);
7284 static void vlv_compute_dpll(struct intel_crtc *crtc,
7285 struct intel_crtc_state *pipe_config)
7287 pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
7288 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
7289 if (crtc->pipe != PIPE_A)
7290 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
7292 /* DPLL not used with DSI, but still need the rest set up */
7293 if (!pipe_config->has_dsi_encoder)
7294 pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
7295 DPLL_EXT_BUFFER_ENABLE_VLV;
7297 pipe_config->dpll_hw_state.dpll_md =
7298 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7301 static void chv_compute_dpll(struct intel_crtc *crtc,
7302 struct intel_crtc_state *pipe_config)
7304 pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
7305 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
7306 if (crtc->pipe != PIPE_A)
7307 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
7309 /* DPLL not used with DSI, but still need the rest set up */
7310 if (!pipe_config->has_dsi_encoder)
7311 pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;
7313 pipe_config->dpll_hw_state.dpll_md =
7314 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7317 static void vlv_prepare_pll(struct intel_crtc *crtc,
7318 const struct intel_crtc_state *pipe_config)
7320 struct drm_device *dev = crtc->base.dev;
7321 struct drm_i915_private *dev_priv = dev->dev_private;
7322 enum pipe pipe = crtc->pipe;
7324 u32 bestn, bestm1, bestm2, bestp1, bestp2;
7325 u32 coreclk, reg_val;
7328 I915_WRITE(DPLL(pipe),
7329 pipe_config->dpll_hw_state.dpll &
7330 ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV));
7332 /* No need to actually set up the DPLL with DSI */
7333 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
7336 mutex_lock(&dev_priv->sb_lock);
7338 bestn = pipe_config->dpll.n;
7339 bestm1 = pipe_config->dpll.m1;
7340 bestm2 = pipe_config->dpll.m2;
7341 bestp1 = pipe_config->dpll.p1;
7342 bestp2 = pipe_config->dpll.p2;
7344 /* See eDP HDMI DPIO driver vbios notes doc */
7346 /* PLL B needs special handling */
7348 vlv_pllb_recal_opamp(dev_priv, pipe);
7350 /* Set up Tx target for periodic Rcomp update */
7351 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
7353 /* Disable target IRef on PLL */
7354 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
7355 reg_val &= 0x00ffffff;
7356 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
7358 /* Disable fast lock */
7359 vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
7361 /* Set idtafcrecal before PLL is enabled */
7362 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
7363 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
7364 mdiv |= ((bestn << DPIO_N_SHIFT));
7365 mdiv |= (1 << DPIO_K_SHIFT);
7368 * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
7369 * but we don't support that).
7370 * Note: don't use the DAC post divider as it seems unstable.
7372 mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
7373 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
7375 mdiv |= DPIO_ENABLE_CALIBRATION;
7376 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
7378 /* Set HBR and RBR LPF coefficients */
7379 if (pipe_config->port_clock == 162000 ||
7380 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG) ||
7381 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
7382 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
7385 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
7388 if (pipe_config->has_dp_encoder) {
7389 /* Use SSC source */
7391 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7394 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7396 } else { /* HDMI or VGA */
7397 /* Use bend source */
7399 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7402 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7406 coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
7407 coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
7408 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
7409 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
7410 coreclk |= 0x01000000;
7411 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
7413 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
7414 mutex_unlock(&dev_priv->sb_lock);
7417 static void chv_prepare_pll(struct intel_crtc *crtc,
7418 const struct intel_crtc_state *pipe_config)
7420 struct drm_device *dev = crtc->base.dev;
7421 struct drm_i915_private *dev_priv = dev->dev_private;
7422 enum pipe pipe = crtc->pipe;
7423 enum dpio_channel port = vlv_pipe_to_channel(pipe);
7424 u32 loopfilter, tribuf_calcntr;
7425 u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
7429 /* Enable Refclk and SSC */
7430 I915_WRITE(DPLL(pipe),
7431 pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
7433 /* No need to actually set up the DPLL with DSI */
7434 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
7437 bestn = pipe_config->dpll.n;
7438 bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
7439 bestm1 = pipe_config->dpll.m1;
7440 bestm2 = pipe_config->dpll.m2 >> 22;
7441 bestp1 = pipe_config->dpll.p1;
7442 bestp2 = pipe_config->dpll.p2;
7443 vco = pipe_config->dpll.vco;
7447 mutex_lock(&dev_priv->sb_lock);
7449 /* p1 and p2 divider */
7450 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
7451 5 << DPIO_CHV_S1_DIV_SHIFT |
7452 bestp1 << DPIO_CHV_P1_DIV_SHIFT |
7453 bestp2 << DPIO_CHV_P2_DIV_SHIFT |
7454 1 << DPIO_CHV_K_DIV_SHIFT);
7456 /* Feedback post-divider - m2 */
7457 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
7459 /* Feedback refclk divider - n and m1 */
7460 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
7461 DPIO_CHV_M1_DIV_BY_2 |
7462 1 << DPIO_CHV_N_DIV_SHIFT);
7464 /* M2 fraction division */
7465 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
7467 /* M2 fraction division enable */
7468 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
7469 dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
7470 dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
7472 dpio_val |= DPIO_CHV_FRAC_DIV_EN;
7473 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
7475 /* Program digital lock detect threshold */
7476 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
7477 dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
7478 DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
7479 dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
7481 dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
7482 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
7485 if (vco == 5400000) {
7486 loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
7487 loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
7488 loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
7489 tribuf_calcntr = 0x9;
7490 } else if (vco <= 6200000) {
7491 loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
7492 loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
7493 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7494 tribuf_calcntr = 0x9;
7495 } else if (vco <= 6480000) {
7496 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
7497 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
7498 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7499 tribuf_calcntr = 0x8;
7501 /* Not supported. Apply the same limits as in the max case */
7502 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
7503 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
7504 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7507 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
7509 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
7510 dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
7511 dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
7512 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);
7515 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
7516 vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
7519 mutex_unlock(&dev_priv->sb_lock);
7523 * vlv_force_pll_on - forcibly enable just the PLL
7524 * @dev_priv: i915 private structure
7525 * @pipe: pipe PLL to enable
7526 * @dpll: PLL configuration
7528 * Enable the PLL for @pipe using the supplied @dpll config. To be used
7529 * in cases where we need the PLL enabled even when @pipe is not going to
7532 int vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
7533 const struct dpll *dpll)
7535 struct intel_crtc *crtc =
7536 to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe));
7537 struct intel_crtc_state *pipe_config;
7539 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
7543 pipe_config->base.crtc = &crtc->base;
7544 pipe_config->pixel_multiplier = 1;
7545 pipe_config->dpll = *dpll;
7547 if (IS_CHERRYVIEW(dev)) {
7548 chv_compute_dpll(crtc, pipe_config);
7549 chv_prepare_pll(crtc, pipe_config);
7550 chv_enable_pll(crtc, pipe_config);
7552 vlv_compute_dpll(crtc, pipe_config);
7553 vlv_prepare_pll(crtc, pipe_config);
7554 vlv_enable_pll(crtc, pipe_config);
7563 * vlv_force_pll_off - forcibly disable just the PLL
7564 * @dev_priv: i915 private structure
7565 * @pipe: pipe PLL to disable
7567 * Disable the PLL for @pipe. To be used in cases where we need
7568 * the PLL enabled even when @pipe is not going to be enabled.
7570 void vlv_force_pll_off(struct drm_device *dev, enum pipe pipe)
7572 if (IS_CHERRYVIEW(dev))
7573 chv_disable_pll(to_i915(dev), pipe);
7575 vlv_disable_pll(to_i915(dev), pipe);
7578 static void i9xx_compute_dpll(struct intel_crtc *crtc,
7579 struct intel_crtc_state *crtc_state,
7580 struct dpll *reduced_clock)
7582 struct drm_device *dev = crtc->base.dev;
7583 struct drm_i915_private *dev_priv = dev->dev_private;
7586 struct dpll *clock = &crtc_state->dpll;
7588 i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
7590 is_sdvo = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO) ||
7591 intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI);
7593 dpll = DPLL_VGA_MODE_DIS;
7595 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
7596 dpll |= DPLLB_MODE_LVDS;
7598 dpll |= DPLLB_MODE_DAC_SERIAL;
7600 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
7601 dpll |= (crtc_state->pixel_multiplier - 1)
7602 << SDVO_MULTIPLIER_SHIFT_HIRES;
7606 dpll |= DPLL_SDVO_HIGH_SPEED;
7608 if (crtc_state->has_dp_encoder)
7609 dpll |= DPLL_SDVO_HIGH_SPEED;
7611 /* compute bitmask from p1 value */
7612 if (IS_PINEVIEW(dev))
7613 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
7615 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7616 if (IS_G4X(dev) && reduced_clock)
7617 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
7619 switch (clock->p2) {
7621 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
7624 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
7627 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
7630 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
7633 if (INTEL_INFO(dev)->gen >= 4)
7634 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
7636 if (crtc_state->sdvo_tv_clock)
7637 dpll |= PLL_REF_INPUT_TVCLKINBC;
7638 else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7639 intel_panel_use_ssc(dev_priv))
7640 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
7642 dpll |= PLL_REF_INPUT_DREFCLK;
7644 dpll |= DPLL_VCO_ENABLE;
7645 crtc_state->dpll_hw_state.dpll = dpll;
7647 if (INTEL_INFO(dev)->gen >= 4) {
7648 u32 dpll_md = (crtc_state->pixel_multiplier - 1)
7649 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7650 crtc_state->dpll_hw_state.dpll_md = dpll_md;
7654 static void i8xx_compute_dpll(struct intel_crtc *crtc,
7655 struct intel_crtc_state *crtc_state,
7656 struct dpll *reduced_clock)
7658 struct drm_device *dev = crtc->base.dev;
7659 struct drm_i915_private *dev_priv = dev->dev_private;
7661 struct dpll *clock = &crtc_state->dpll;
7663 i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
7665 dpll = DPLL_VGA_MODE_DIS;
7667 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7668 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7671 dpll |= PLL_P1_DIVIDE_BY_TWO;
7673 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7675 dpll |= PLL_P2_DIVIDE_BY_4;
7678 if (!IS_I830(dev) && intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
7679 dpll |= DPLL_DVO_2X_MODE;
7681 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7682 intel_panel_use_ssc(dev_priv))
7683 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
7685 dpll |= PLL_REF_INPUT_DREFCLK;
7687 dpll |= DPLL_VCO_ENABLE;
7688 crtc_state->dpll_hw_state.dpll = dpll;
7691 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
7693 struct drm_device *dev = intel_crtc->base.dev;
7694 struct drm_i915_private *dev_priv = dev->dev_private;
7695 enum pipe pipe = intel_crtc->pipe;
7696 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
7697 const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode;
7698 uint32_t crtc_vtotal, crtc_vblank_end;
7701 /* We need to be careful not to changed the adjusted mode, for otherwise
7702 * the hw state checker will get angry at the mismatch. */
7703 crtc_vtotal = adjusted_mode->crtc_vtotal;
7704 crtc_vblank_end = adjusted_mode->crtc_vblank_end;
7706 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
7707 /* the chip adds 2 halflines automatically */
7709 crtc_vblank_end -= 1;
7711 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
7712 vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
7714 vsyncshift = adjusted_mode->crtc_hsync_start -
7715 adjusted_mode->crtc_htotal / 2;
7717 vsyncshift += adjusted_mode->crtc_htotal;
7720 if (INTEL_INFO(dev)->gen > 3)
7721 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
7723 I915_WRITE(HTOTAL(cpu_transcoder),
7724 (adjusted_mode->crtc_hdisplay - 1) |
7725 ((adjusted_mode->crtc_htotal - 1) << 16));
7726 I915_WRITE(HBLANK(cpu_transcoder),
7727 (adjusted_mode->crtc_hblank_start - 1) |
7728 ((adjusted_mode->crtc_hblank_end - 1) << 16));
7729 I915_WRITE(HSYNC(cpu_transcoder),
7730 (adjusted_mode->crtc_hsync_start - 1) |
7731 ((adjusted_mode->crtc_hsync_end - 1) << 16));
7733 I915_WRITE(VTOTAL(cpu_transcoder),
7734 (adjusted_mode->crtc_vdisplay - 1) |
7735 ((crtc_vtotal - 1) << 16));
7736 I915_WRITE(VBLANK(cpu_transcoder),
7737 (adjusted_mode->crtc_vblank_start - 1) |
7738 ((crtc_vblank_end - 1) << 16));
7739 I915_WRITE(VSYNC(cpu_transcoder),
7740 (adjusted_mode->crtc_vsync_start - 1) |
7741 ((adjusted_mode->crtc_vsync_end - 1) << 16));
7743 /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
7744 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
7745 * documented on the DDI_FUNC_CTL register description, EDP Input Select
7747 if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
7748 (pipe == PIPE_B || pipe == PIPE_C))
7749 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
7753 static void intel_set_pipe_src_size(struct intel_crtc *intel_crtc)
7755 struct drm_device *dev = intel_crtc->base.dev;
7756 struct drm_i915_private *dev_priv = dev->dev_private;
7757 enum pipe pipe = intel_crtc->pipe;
7759 /* pipesrc controls the size that is scaled from, which should
7760 * always be the user's requested size.
7762 I915_WRITE(PIPESRC(pipe),
7763 ((intel_crtc->config->pipe_src_w - 1) << 16) |
7764 (intel_crtc->config->pipe_src_h - 1));
7767 static void intel_get_pipe_timings(struct intel_crtc *crtc,
7768 struct intel_crtc_state *pipe_config)
7770 struct drm_device *dev = crtc->base.dev;
7771 struct drm_i915_private *dev_priv = dev->dev_private;
7772 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
7775 tmp = I915_READ(HTOTAL(cpu_transcoder));
7776 pipe_config->base.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
7777 pipe_config->base.adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
7778 tmp = I915_READ(HBLANK(cpu_transcoder));
7779 pipe_config->base.adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
7780 pipe_config->base.adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
7781 tmp = I915_READ(HSYNC(cpu_transcoder));
7782 pipe_config->base.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
7783 pipe_config->base.adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
7785 tmp = I915_READ(VTOTAL(cpu_transcoder));
7786 pipe_config->base.adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
7787 pipe_config->base.adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
7788 tmp = I915_READ(VBLANK(cpu_transcoder));
7789 pipe_config->base.adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
7790 pipe_config->base.adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
7791 tmp = I915_READ(VSYNC(cpu_transcoder));
7792 pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
7793 pipe_config->base.adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
7795 if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
7796 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
7797 pipe_config->base.adjusted_mode.crtc_vtotal += 1;
7798 pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
7802 static void intel_get_pipe_src_size(struct intel_crtc *crtc,
7803 struct intel_crtc_state *pipe_config)
7805 struct drm_device *dev = crtc->base.dev;
7806 struct drm_i915_private *dev_priv = dev->dev_private;
7809 tmp = I915_READ(PIPESRC(crtc->pipe));
7810 pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
7811 pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
7813 pipe_config->base.mode.vdisplay = pipe_config->pipe_src_h;
7814 pipe_config->base.mode.hdisplay = pipe_config->pipe_src_w;
7817 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
7818 struct intel_crtc_state *pipe_config)
7820 mode->hdisplay = pipe_config->base.adjusted_mode.crtc_hdisplay;
7821 mode->htotal = pipe_config->base.adjusted_mode.crtc_htotal;
7822 mode->hsync_start = pipe_config->base.adjusted_mode.crtc_hsync_start;
7823 mode->hsync_end = pipe_config->base.adjusted_mode.crtc_hsync_end;
7825 mode->vdisplay = pipe_config->base.adjusted_mode.crtc_vdisplay;
7826 mode->vtotal = pipe_config->base.adjusted_mode.crtc_vtotal;
7827 mode->vsync_start = pipe_config->base.adjusted_mode.crtc_vsync_start;
7828 mode->vsync_end = pipe_config->base.adjusted_mode.crtc_vsync_end;
7830 mode->flags = pipe_config->base.adjusted_mode.flags;
7831 mode->type = DRM_MODE_TYPE_DRIVER;
7833 mode->clock = pipe_config->base.adjusted_mode.crtc_clock;
7834 mode->flags |= pipe_config->base.adjusted_mode.flags;
7836 mode->hsync = drm_mode_hsync(mode);
7837 mode->vrefresh = drm_mode_vrefresh(mode);
7838 drm_mode_set_name(mode);
7841 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
7843 struct drm_device *dev = intel_crtc->base.dev;
7844 struct drm_i915_private *dev_priv = dev->dev_private;
7849 if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
7850 (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
7851 pipeconf |= I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE;
7853 if (intel_crtc->config->double_wide)
7854 pipeconf |= PIPECONF_DOUBLE_WIDE;
7856 /* only g4x and later have fancy bpc/dither controls */
7857 if (IS_G4X(dev) || IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
7858 /* Bspec claims that we can't use dithering for 30bpp pipes. */
7859 if (intel_crtc->config->dither && intel_crtc->config->pipe_bpp != 30)
7860 pipeconf |= PIPECONF_DITHER_EN |
7861 PIPECONF_DITHER_TYPE_SP;
7863 switch (intel_crtc->config->pipe_bpp) {
7865 pipeconf |= PIPECONF_6BPC;
7868 pipeconf |= PIPECONF_8BPC;
7871 pipeconf |= PIPECONF_10BPC;
7874 /* Case prevented by intel_choose_pipe_bpp_dither. */
7879 if (HAS_PIPE_CXSR(dev)) {
7880 if (intel_crtc->lowfreq_avail) {
7881 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
7882 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
7884 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
7888 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
7889 if (INTEL_INFO(dev)->gen < 4 ||
7890 intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
7891 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
7893 pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
7895 pipeconf |= PIPECONF_PROGRESSIVE;
7897 if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) &&
7898 intel_crtc->config->limited_color_range)
7899 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
7901 I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
7902 POSTING_READ(PIPECONF(intel_crtc->pipe));
7905 static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
7906 struct intel_crtc_state *crtc_state)
7908 struct drm_device *dev = crtc->base.dev;
7909 struct drm_i915_private *dev_priv = dev->dev_private;
7910 const struct intel_limit *limit;
7913 memset(&crtc_state->dpll_hw_state, 0,
7914 sizeof(crtc_state->dpll_hw_state));
7916 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7917 if (intel_panel_use_ssc(dev_priv)) {
7918 refclk = dev_priv->vbt.lvds_ssc_freq;
7919 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7922 limit = &intel_limits_i8xx_lvds;
7923 } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO)) {
7924 limit = &intel_limits_i8xx_dvo;
7926 limit = &intel_limits_i8xx_dac;
7929 if (!crtc_state->clock_set &&
7930 !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7931 refclk, NULL, &crtc_state->dpll)) {
7932 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7936 i8xx_compute_dpll(crtc, crtc_state, NULL);
7941 static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
7942 struct intel_crtc_state *crtc_state)
7944 struct drm_device *dev = crtc->base.dev;
7945 struct drm_i915_private *dev_priv = dev->dev_private;
7946 const struct intel_limit *limit;
7949 memset(&crtc_state->dpll_hw_state, 0,
7950 sizeof(crtc_state->dpll_hw_state));
7952 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7953 if (intel_panel_use_ssc(dev_priv)) {
7954 refclk = dev_priv->vbt.lvds_ssc_freq;
7955 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7958 if (intel_is_dual_link_lvds(dev))
7959 limit = &intel_limits_g4x_dual_channel_lvds;
7961 limit = &intel_limits_g4x_single_channel_lvds;
7962 } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI) ||
7963 intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
7964 limit = &intel_limits_g4x_hdmi;
7965 } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO)) {
7966 limit = &intel_limits_g4x_sdvo;
7968 /* The option is for other outputs */
7969 limit = &intel_limits_i9xx_sdvo;
7972 if (!crtc_state->clock_set &&
7973 !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7974 refclk, NULL, &crtc_state->dpll)) {
7975 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7979 i9xx_compute_dpll(crtc, crtc_state, NULL);
7984 static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
7985 struct intel_crtc_state *crtc_state)
7987 struct drm_device *dev = crtc->base.dev;
7988 struct drm_i915_private *dev_priv = dev->dev_private;
7989 const struct intel_limit *limit;
7992 memset(&crtc_state->dpll_hw_state, 0,
7993 sizeof(crtc_state->dpll_hw_state));
7995 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7996 if (intel_panel_use_ssc(dev_priv)) {
7997 refclk = dev_priv->vbt.lvds_ssc_freq;
7998 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
8001 limit = &intel_limits_pineview_lvds;
8003 limit = &intel_limits_pineview_sdvo;
8006 if (!crtc_state->clock_set &&
8007 !pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8008 refclk, NULL, &crtc_state->dpll)) {
8009 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8013 i9xx_compute_dpll(crtc, crtc_state, NULL);
8018 static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
8019 struct intel_crtc_state *crtc_state)
8021 struct drm_device *dev = crtc->base.dev;
8022 struct drm_i915_private *dev_priv = dev->dev_private;
8023 const struct intel_limit *limit;
8026 memset(&crtc_state->dpll_hw_state, 0,
8027 sizeof(crtc_state->dpll_hw_state));
8029 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
8030 if (intel_panel_use_ssc(dev_priv)) {
8031 refclk = dev_priv->vbt.lvds_ssc_freq;
8032 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
8035 limit = &intel_limits_i9xx_lvds;
8037 limit = &intel_limits_i9xx_sdvo;
8040 if (!crtc_state->clock_set &&
8041 !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8042 refclk, NULL, &crtc_state->dpll)) {
8043 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8047 i9xx_compute_dpll(crtc, crtc_state, NULL);
8052 static int chv_crtc_compute_clock(struct intel_crtc *crtc,
8053 struct intel_crtc_state *crtc_state)
8055 int refclk = 100000;
8056 const struct intel_limit *limit = &intel_limits_chv;
8058 memset(&crtc_state->dpll_hw_state, 0,
8059 sizeof(crtc_state->dpll_hw_state));
8061 if (!crtc_state->clock_set &&
8062 !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8063 refclk, NULL, &crtc_state->dpll)) {
8064 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8068 chv_compute_dpll(crtc, crtc_state);
8073 static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
8074 struct intel_crtc_state *crtc_state)
8076 int refclk = 100000;
8077 const struct intel_limit *limit = &intel_limits_vlv;
8079 memset(&crtc_state->dpll_hw_state, 0,
8080 sizeof(crtc_state->dpll_hw_state));
8082 if (!crtc_state->clock_set &&
8083 !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8084 refclk, NULL, &crtc_state->dpll)) {
8085 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8089 vlv_compute_dpll(crtc, crtc_state);
8094 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
8095 struct intel_crtc_state *pipe_config)
8097 struct drm_device *dev = crtc->base.dev;
8098 struct drm_i915_private *dev_priv = dev->dev_private;
8101 if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev)))
8104 tmp = I915_READ(PFIT_CONTROL);
8105 if (!(tmp & PFIT_ENABLE))
8108 /* Check whether the pfit is attached to our pipe. */
8109 if (INTEL_INFO(dev)->gen < 4) {
8110 if (crtc->pipe != PIPE_B)
8113 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
8117 pipe_config->gmch_pfit.control = tmp;
8118 pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
8121 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
8122 struct intel_crtc_state *pipe_config)
8124 struct drm_device *dev = crtc->base.dev;
8125 struct drm_i915_private *dev_priv = dev->dev_private;
8126 int pipe = pipe_config->cpu_transcoder;
8129 int refclk = 100000;
8131 /* In case of DSI, DPLL will not be used */
8132 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
8135 mutex_lock(&dev_priv->sb_lock);
8136 mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
8137 mutex_unlock(&dev_priv->sb_lock);
8139 clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
8140 clock.m2 = mdiv & DPIO_M2DIV_MASK;
8141 clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
8142 clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
8143 clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
8145 pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock);
8149 i9xx_get_initial_plane_config(struct intel_crtc *crtc,
8150 struct intel_initial_plane_config *plane_config)
8152 struct drm_device *dev = crtc->base.dev;
8153 struct drm_i915_private *dev_priv = dev->dev_private;
8154 u32 val, base, offset;
8155 int pipe = crtc->pipe, plane = crtc->plane;
8156 int fourcc, pixel_format;
8157 unsigned int aligned_height;
8158 struct drm_framebuffer *fb;
8159 struct intel_framebuffer *intel_fb;
8161 val = I915_READ(DSPCNTR(plane));
8162 if (!(val & DISPLAY_PLANE_ENABLE))
8165 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
8167 DRM_DEBUG_KMS("failed to alloc fb\n");
8171 fb = &intel_fb->base;
8173 if (INTEL_INFO(dev)->gen >= 4) {
8174 if (val & DISPPLANE_TILED) {
8175 plane_config->tiling = I915_TILING_X;
8176 fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
8180 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
8181 fourcc = i9xx_format_to_fourcc(pixel_format);
8182 fb->pixel_format = fourcc;
8183 fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
8185 if (INTEL_INFO(dev)->gen >= 4) {
8186 if (plane_config->tiling)
8187 offset = I915_READ(DSPTILEOFF(plane));
8189 offset = I915_READ(DSPLINOFF(plane));
8190 base = I915_READ(DSPSURF(plane)) & 0xfffff000;
8192 base = I915_READ(DSPADDR(plane));
8194 plane_config->base = base;
8196 val = I915_READ(PIPESRC(pipe));
8197 fb->width = ((val >> 16) & 0xfff) + 1;
8198 fb->height = ((val >> 0) & 0xfff) + 1;
8200 val = I915_READ(DSPSTRIDE(pipe));
8201 fb->pitches[0] = val & 0xffffffc0;
8203 aligned_height = intel_fb_align_height(dev, fb->height,
8207 plane_config->size = fb->pitches[0] * aligned_height;
8209 DRM_DEBUG_KMS("pipe/plane %c/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
8210 pipe_name(pipe), plane, fb->width, fb->height,
8211 fb->bits_per_pixel, base, fb->pitches[0],
8212 plane_config->size);
8214 plane_config->fb = intel_fb;
8217 static void chv_crtc_clock_get(struct intel_crtc *crtc,
8218 struct intel_crtc_state *pipe_config)
8220 struct drm_device *dev = crtc->base.dev;
8221 struct drm_i915_private *dev_priv = dev->dev_private;
8222 int pipe = pipe_config->cpu_transcoder;
8223 enum dpio_channel port = vlv_pipe_to_channel(pipe);
8225 u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
8226 int refclk = 100000;
8228 /* In case of DSI, DPLL will not be used */
8229 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
8232 mutex_lock(&dev_priv->sb_lock);
8233 cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
8234 pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
8235 pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
8236 pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
8237 pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
8238 mutex_unlock(&dev_priv->sb_lock);
8240 clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
8241 clock.m2 = (pll_dw0 & 0xff) << 22;
8242 if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
8243 clock.m2 |= pll_dw2 & 0x3fffff;
8244 clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
8245 clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
8246 clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
8248 pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
8251 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
8252 struct intel_crtc_state *pipe_config)
8254 struct drm_device *dev = crtc->base.dev;
8255 struct drm_i915_private *dev_priv = dev->dev_private;
8256 enum intel_display_power_domain power_domain;
8260 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
8261 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
8264 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
8265 pipe_config->shared_dpll = NULL;
8269 tmp = I915_READ(PIPECONF(crtc->pipe));
8270 if (!(tmp & PIPECONF_ENABLE))
8273 if (IS_G4X(dev) || IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
8274 switch (tmp & PIPECONF_BPC_MASK) {
8276 pipe_config->pipe_bpp = 18;
8279 pipe_config->pipe_bpp = 24;
8281 case PIPECONF_10BPC:
8282 pipe_config->pipe_bpp = 30;
8289 if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) &&
8290 (tmp & PIPECONF_COLOR_RANGE_SELECT))
8291 pipe_config->limited_color_range = true;
8293 if (INTEL_INFO(dev)->gen < 4)
8294 pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
8296 intel_get_pipe_timings(crtc, pipe_config);
8297 intel_get_pipe_src_size(crtc, pipe_config);
8299 i9xx_get_pfit_config(crtc, pipe_config);
8301 if (INTEL_INFO(dev)->gen >= 4) {
8302 /* No way to read it out on pipes B and C */
8303 if (IS_CHERRYVIEW(dev) && crtc->pipe != PIPE_A)
8304 tmp = dev_priv->chv_dpll_md[crtc->pipe];
8306 tmp = I915_READ(DPLL_MD(crtc->pipe));
8307 pipe_config->pixel_multiplier =
8308 ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
8309 >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
8310 pipe_config->dpll_hw_state.dpll_md = tmp;
8311 } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
8312 tmp = I915_READ(DPLL(crtc->pipe));
8313 pipe_config->pixel_multiplier =
8314 ((tmp & SDVO_MULTIPLIER_MASK)
8315 >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
8317 /* Note that on i915G/GM the pixel multiplier is in the sdvo
8318 * port and will be fixed up in the encoder->get_config
8320 pipe_config->pixel_multiplier = 1;
8322 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
8323 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
8325 * DPLL_DVO_2X_MODE must be enabled for both DPLLs
8326 * on 830. Filter it out here so that we don't
8327 * report errors due to that.
8330 pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
8332 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
8333 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
8335 /* Mask out read-only status bits. */
8336 pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
8337 DPLL_PORTC_READY_MASK |
8338 DPLL_PORTB_READY_MASK);
8341 if (IS_CHERRYVIEW(dev))
8342 chv_crtc_clock_get(crtc, pipe_config);
8343 else if (IS_VALLEYVIEW(dev))
8344 vlv_crtc_clock_get(crtc, pipe_config);
8346 i9xx_crtc_clock_get(crtc, pipe_config);
8349 * Normally the dotclock is filled in by the encoder .get_config()
8350 * but in case the pipe is enabled w/o any ports we need a sane
8353 pipe_config->base.adjusted_mode.crtc_clock =
8354 pipe_config->port_clock / pipe_config->pixel_multiplier;
8359 intel_display_power_put(dev_priv, power_domain);
8364 static void ironlake_init_pch_refclk(struct drm_device *dev)
8366 struct drm_i915_private *dev_priv = dev->dev_private;
8367 struct intel_encoder *encoder;
8370 bool has_lvds = false;
8371 bool has_cpu_edp = false;
8372 bool has_panel = false;
8373 bool has_ck505 = false;
8374 bool can_ssc = false;
8375 bool using_ssc_source = false;
8377 /* We need to take the global config into account */
8378 for_each_intel_encoder(dev, encoder) {
8379 switch (encoder->type) {
8380 case INTEL_OUTPUT_LVDS:
8384 case INTEL_OUTPUT_EDP:
8386 if (enc_to_dig_port(&encoder->base)->port == PORT_A)
8394 if (HAS_PCH_IBX(dev)) {
8395 has_ck505 = dev_priv->vbt.display_clock_mode;
8396 can_ssc = has_ck505;
8402 /* Check if any DPLLs are using the SSC source */
8403 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
8404 u32 temp = I915_READ(PCH_DPLL(i));
8406 if (!(temp & DPLL_VCO_ENABLE))
8409 if ((temp & PLL_REF_INPUT_MASK) ==
8410 PLLB_REF_INPUT_SPREADSPECTRUMIN) {
8411 using_ssc_source = true;
8416 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d using_ssc_source %d\n",
8417 has_panel, has_lvds, has_ck505, using_ssc_source);
8419 /* Ironlake: try to setup display ref clock before DPLL
8420 * enabling. This is only under driver's control after
8421 * PCH B stepping, previous chipset stepping should be
8422 * ignoring this setting.
8424 val = I915_READ(PCH_DREF_CONTROL);
8426 /* As we must carefully and slowly disable/enable each source in turn,
8427 * compute the final state we want first and check if we need to
8428 * make any changes at all.
8431 final &= ~DREF_NONSPREAD_SOURCE_MASK;
8433 final |= DREF_NONSPREAD_CK505_ENABLE;
8435 final |= DREF_NONSPREAD_SOURCE_ENABLE;
8437 final &= ~DREF_SSC_SOURCE_MASK;
8438 final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8439 final &= ~DREF_SSC1_ENABLE;
8442 final |= DREF_SSC_SOURCE_ENABLE;
8444 if (intel_panel_use_ssc(dev_priv) && can_ssc)
8445 final |= DREF_SSC1_ENABLE;
8448 if (intel_panel_use_ssc(dev_priv) && can_ssc)
8449 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
8451 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
8453 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8454 } else if (using_ssc_source) {
8455 final |= DREF_SSC_SOURCE_ENABLE;
8456 final |= DREF_SSC1_ENABLE;
8462 /* Always enable nonspread source */
8463 val &= ~DREF_NONSPREAD_SOURCE_MASK;
8466 val |= DREF_NONSPREAD_CK505_ENABLE;
8468 val |= DREF_NONSPREAD_SOURCE_ENABLE;
8471 val &= ~DREF_SSC_SOURCE_MASK;
8472 val |= DREF_SSC_SOURCE_ENABLE;
8474 /* SSC must be turned on before enabling the CPU output */
8475 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
8476 DRM_DEBUG_KMS("Using SSC on panel\n");
8477 val |= DREF_SSC1_ENABLE;
8479 val &= ~DREF_SSC1_ENABLE;
8481 /* Get SSC going before enabling the outputs */
8482 I915_WRITE(PCH_DREF_CONTROL, val);
8483 POSTING_READ(PCH_DREF_CONTROL);
8486 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8488 /* Enable CPU source on CPU attached eDP */
8490 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
8491 DRM_DEBUG_KMS("Using SSC on eDP\n");
8492 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
8494 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
8496 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8498 I915_WRITE(PCH_DREF_CONTROL, val);
8499 POSTING_READ(PCH_DREF_CONTROL);
8502 DRM_DEBUG_KMS("Disabling CPU source output\n");
8504 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8506 /* Turn off CPU output */
8507 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8509 I915_WRITE(PCH_DREF_CONTROL, val);
8510 POSTING_READ(PCH_DREF_CONTROL);
8513 if (!using_ssc_source) {
8514 DRM_DEBUG_KMS("Disabling SSC source\n");
8516 /* Turn off the SSC source */
8517 val &= ~DREF_SSC_SOURCE_MASK;
8518 val |= DREF_SSC_SOURCE_DISABLE;
8521 val &= ~DREF_SSC1_ENABLE;
8523 I915_WRITE(PCH_DREF_CONTROL, val);
8524 POSTING_READ(PCH_DREF_CONTROL);
8529 BUG_ON(val != final);
8532 static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
8536 tmp = I915_READ(SOUTH_CHICKEN2);
8537 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
8538 I915_WRITE(SOUTH_CHICKEN2, tmp);
8540 if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
8541 FDI_MPHY_IOSFSB_RESET_STATUS, 100))
8542 DRM_ERROR("FDI mPHY reset assert timeout\n");
8544 tmp = I915_READ(SOUTH_CHICKEN2);
8545 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
8546 I915_WRITE(SOUTH_CHICKEN2, tmp);
8548 if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
8549 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
8550 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
8553 /* WaMPhyProgramming:hsw */
8554 static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
8558 tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
8559 tmp &= ~(0xFF << 24);
8560 tmp |= (0x12 << 24);
8561 intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
8563 tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
8565 intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
8567 tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
8569 intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
8571 tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
8572 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
8573 intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
8575 tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
8576 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
8577 intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
8579 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
8582 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
8584 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
8587 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
8589 tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
8592 intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
8594 tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
8597 intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
8599 tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
8600 tmp &= ~(0xFF << 16);
8601 tmp |= (0x1C << 16);
8602 intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
8604 tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
8605 tmp &= ~(0xFF << 16);
8606 tmp |= (0x1C << 16);
8607 intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
8609 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
8611 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
8613 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
8615 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
8617 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
8618 tmp &= ~(0xF << 28);
8620 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
8622 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
8623 tmp &= ~(0xF << 28);
8625 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
8628 /* Implements 3 different sequences from BSpec chapter "Display iCLK
8629 * Programming" based on the parameters passed:
8630 * - Sequence to enable CLKOUT_DP
8631 * - Sequence to enable CLKOUT_DP without spread
8632 * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
8634 static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
8637 struct drm_i915_private *dev_priv = dev->dev_private;
8640 if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
8642 if (WARN(HAS_PCH_LPT_LP(dev) && with_fdi, "LP PCH doesn't have FDI\n"))
8645 mutex_lock(&dev_priv->sb_lock);
8647 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8648 tmp &= ~SBI_SSCCTL_DISABLE;
8649 tmp |= SBI_SSCCTL_PATHALT;
8650 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8655 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8656 tmp &= ~SBI_SSCCTL_PATHALT;
8657 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8660 lpt_reset_fdi_mphy(dev_priv);
8661 lpt_program_fdi_mphy(dev_priv);
8665 reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
8666 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
8667 tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
8668 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
8670 mutex_unlock(&dev_priv->sb_lock);
8673 /* Sequence to disable CLKOUT_DP */
8674 static void lpt_disable_clkout_dp(struct drm_device *dev)
8676 struct drm_i915_private *dev_priv = dev->dev_private;
8679 mutex_lock(&dev_priv->sb_lock);
8681 reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
8682 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
8683 tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
8684 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
8686 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8687 if (!(tmp & SBI_SSCCTL_DISABLE)) {
8688 if (!(tmp & SBI_SSCCTL_PATHALT)) {
8689 tmp |= SBI_SSCCTL_PATHALT;
8690 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8693 tmp |= SBI_SSCCTL_DISABLE;
8694 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8697 mutex_unlock(&dev_priv->sb_lock);
8700 #define BEND_IDX(steps) ((50 + (steps)) / 5)
8702 static const uint16_t sscdivintphase[] = {
8703 [BEND_IDX( 50)] = 0x3B23,
8704 [BEND_IDX( 45)] = 0x3B23,
8705 [BEND_IDX( 40)] = 0x3C23,
8706 [BEND_IDX( 35)] = 0x3C23,
8707 [BEND_IDX( 30)] = 0x3D23,
8708 [BEND_IDX( 25)] = 0x3D23,
8709 [BEND_IDX( 20)] = 0x3E23,
8710 [BEND_IDX( 15)] = 0x3E23,
8711 [BEND_IDX( 10)] = 0x3F23,
8712 [BEND_IDX( 5)] = 0x3F23,
8713 [BEND_IDX( 0)] = 0x0025,
8714 [BEND_IDX( -5)] = 0x0025,
8715 [BEND_IDX(-10)] = 0x0125,
8716 [BEND_IDX(-15)] = 0x0125,
8717 [BEND_IDX(-20)] = 0x0225,
8718 [BEND_IDX(-25)] = 0x0225,
8719 [BEND_IDX(-30)] = 0x0325,
8720 [BEND_IDX(-35)] = 0x0325,
8721 [BEND_IDX(-40)] = 0x0425,
8722 [BEND_IDX(-45)] = 0x0425,
8723 [BEND_IDX(-50)] = 0x0525,
8728 * steps -50 to 50 inclusive, in steps of 5
8729 * < 0 slow down the clock, > 0 speed up the clock, 0 == no bend (135MHz)
8730 * change in clock period = -(steps / 10) * 5.787 ps
8732 static void lpt_bend_clkout_dp(struct drm_i915_private *dev_priv, int steps)
8735 int idx = BEND_IDX(steps);
8737 if (WARN_ON(steps % 5 != 0))
8740 if (WARN_ON(idx >= ARRAY_SIZE(sscdivintphase)))
8743 mutex_lock(&dev_priv->sb_lock);
8745 if (steps % 10 != 0)
8749 intel_sbi_write(dev_priv, SBI_SSCDITHPHASE, tmp, SBI_ICLK);
8751 tmp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE, SBI_ICLK);
8753 tmp |= sscdivintphase[idx];
8754 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE, tmp, SBI_ICLK);
8756 mutex_unlock(&dev_priv->sb_lock);
8761 static void lpt_init_pch_refclk(struct drm_device *dev)
8763 struct intel_encoder *encoder;
8764 bool has_vga = false;
8766 for_each_intel_encoder(dev, encoder) {
8767 switch (encoder->type) {
8768 case INTEL_OUTPUT_ANALOG:
8777 lpt_bend_clkout_dp(to_i915(dev), 0);
8778 lpt_enable_clkout_dp(dev, true, true);
8780 lpt_disable_clkout_dp(dev);
8785 * Initialize reference clocks when the driver loads
8787 void intel_init_pch_refclk(struct drm_device *dev)
8789 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
8790 ironlake_init_pch_refclk(dev);
8791 else if (HAS_PCH_LPT(dev))
8792 lpt_init_pch_refclk(dev);
8795 static void ironlake_set_pipeconf(struct drm_crtc *crtc)
8797 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
8798 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8799 int pipe = intel_crtc->pipe;
8804 switch (intel_crtc->config->pipe_bpp) {
8806 val |= PIPECONF_6BPC;
8809 val |= PIPECONF_8BPC;
8812 val |= PIPECONF_10BPC;
8815 val |= PIPECONF_12BPC;
8818 /* Case prevented by intel_choose_pipe_bpp_dither. */
8822 if (intel_crtc->config->dither)
8823 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
8825 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
8826 val |= PIPECONF_INTERLACED_ILK;
8828 val |= PIPECONF_PROGRESSIVE;
8830 if (intel_crtc->config->limited_color_range)
8831 val |= PIPECONF_COLOR_RANGE_SELECT;
8833 I915_WRITE(PIPECONF(pipe), val);
8834 POSTING_READ(PIPECONF(pipe));
8837 static void haswell_set_pipeconf(struct drm_crtc *crtc)
8839 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
8840 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8841 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
8844 if (IS_HASWELL(dev_priv) && intel_crtc->config->dither)
8845 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
8847 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
8848 val |= PIPECONF_INTERLACED_ILK;
8850 val |= PIPECONF_PROGRESSIVE;
8852 I915_WRITE(PIPECONF(cpu_transcoder), val);
8853 POSTING_READ(PIPECONF(cpu_transcoder));
8856 static void haswell_set_pipemisc(struct drm_crtc *crtc)
8858 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
8859 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8861 if (IS_BROADWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 9) {
8864 switch (intel_crtc->config->pipe_bpp) {
8866 val |= PIPEMISC_DITHER_6_BPC;
8869 val |= PIPEMISC_DITHER_8_BPC;
8872 val |= PIPEMISC_DITHER_10_BPC;
8875 val |= PIPEMISC_DITHER_12_BPC;
8878 /* Case prevented by pipe_config_set_bpp. */
8882 if (intel_crtc->config->dither)
8883 val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
8885 I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
8889 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
8892 * Account for spread spectrum to avoid
8893 * oversubscribing the link. Max center spread
8894 * is 2.5%; use 5% for safety's sake.
8896 u32 bps = target_clock * bpp * 21 / 20;
8897 return DIV_ROUND_UP(bps, link_bw * 8);
8900 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
8902 return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
8905 static void ironlake_compute_dpll(struct intel_crtc *intel_crtc,
8906 struct intel_crtc_state *crtc_state,
8907 struct dpll *reduced_clock)
8909 struct drm_crtc *crtc = &intel_crtc->base;
8910 struct drm_device *dev = crtc->dev;
8911 struct drm_i915_private *dev_priv = dev->dev_private;
8912 struct drm_atomic_state *state = crtc_state->base.state;
8913 struct drm_connector *connector;
8914 struct drm_connector_state *connector_state;
8915 struct intel_encoder *encoder;
8918 bool is_lvds = false, is_sdvo = false;
8920 for_each_connector_in_state(state, connector, connector_state, i) {
8921 if (connector_state->crtc != crtc_state->base.crtc)
8924 encoder = to_intel_encoder(connector_state->best_encoder);
8926 switch (encoder->type) {
8927 case INTEL_OUTPUT_LVDS:
8930 case INTEL_OUTPUT_SDVO:
8931 case INTEL_OUTPUT_HDMI:
8939 /* Enable autotuning of the PLL clock (if permissible) */
8942 if ((intel_panel_use_ssc(dev_priv) &&
8943 dev_priv->vbt.lvds_ssc_freq == 100000) ||
8944 (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
8946 } else if (crtc_state->sdvo_tv_clock)
8949 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
8951 if (ironlake_needs_fb_cb_tune(&crtc_state->dpll, factor))
8954 if (reduced_clock) {
8955 fp2 = i9xx_dpll_compute_fp(reduced_clock);
8957 if (reduced_clock->m < factor * reduced_clock->n)
8966 dpll |= DPLLB_MODE_LVDS;
8968 dpll |= DPLLB_MODE_DAC_SERIAL;
8970 dpll |= (crtc_state->pixel_multiplier - 1)
8971 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
8974 dpll |= DPLL_SDVO_HIGH_SPEED;
8975 if (crtc_state->has_dp_encoder)
8976 dpll |= DPLL_SDVO_HIGH_SPEED;
8978 /* compute bitmask from p1 value */
8979 dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
8981 dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
8983 switch (crtc_state->dpll.p2) {
8985 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
8988 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
8991 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
8994 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
8998 if (is_lvds && intel_panel_use_ssc(dev_priv))
8999 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
9001 dpll |= PLL_REF_INPUT_DREFCLK;
9003 dpll |= DPLL_VCO_ENABLE;
9005 crtc_state->dpll_hw_state.dpll = dpll;
9006 crtc_state->dpll_hw_state.fp0 = fp;
9007 crtc_state->dpll_hw_state.fp1 = fp2;
9010 static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
9011 struct intel_crtc_state *crtc_state)
9013 struct drm_device *dev = crtc->base.dev;
9014 struct drm_i915_private *dev_priv = dev->dev_private;
9015 struct dpll reduced_clock;
9016 bool has_reduced_clock = false;
9017 struct intel_shared_dpll *pll;
9018 const struct intel_limit *limit;
9019 int refclk = 120000;
9021 memset(&crtc_state->dpll_hw_state, 0,
9022 sizeof(crtc_state->dpll_hw_state));
9024 crtc->lowfreq_avail = false;
9026 /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
9027 if (!crtc_state->has_pch_encoder)
9030 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
9031 if (intel_panel_use_ssc(dev_priv)) {
9032 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
9033 dev_priv->vbt.lvds_ssc_freq);
9034 refclk = dev_priv->vbt.lvds_ssc_freq;
9037 if (intel_is_dual_link_lvds(dev)) {
9038 if (refclk == 100000)
9039 limit = &intel_limits_ironlake_dual_lvds_100m;
9041 limit = &intel_limits_ironlake_dual_lvds;
9043 if (refclk == 100000)
9044 limit = &intel_limits_ironlake_single_lvds_100m;
9046 limit = &intel_limits_ironlake_single_lvds;
9049 limit = &intel_limits_ironlake_dac;
9052 if (!crtc_state->clock_set &&
9053 !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
9054 refclk, NULL, &crtc_state->dpll)) {
9055 DRM_ERROR("Couldn't find PLL settings for mode!\n");
9059 ironlake_compute_dpll(crtc, crtc_state,
9060 has_reduced_clock ? &reduced_clock : NULL);
9062 pll = intel_get_shared_dpll(crtc, crtc_state, NULL);
9064 DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
9065 pipe_name(crtc->pipe));
9069 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
9071 crtc->lowfreq_avail = true;
9076 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
9077 struct intel_link_m_n *m_n)
9079 struct drm_device *dev = crtc->base.dev;
9080 struct drm_i915_private *dev_priv = dev->dev_private;
9081 enum pipe pipe = crtc->pipe;
9083 m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
9084 m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
9085 m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
9087 m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
9088 m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
9089 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9092 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
9093 enum transcoder transcoder,
9094 struct intel_link_m_n *m_n,
9095 struct intel_link_m_n *m2_n2)
9097 struct drm_device *dev = crtc->base.dev;
9098 struct drm_i915_private *dev_priv = dev->dev_private;
9099 enum pipe pipe = crtc->pipe;
9101 if (INTEL_INFO(dev)->gen >= 5) {
9102 m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
9103 m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
9104 m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
9106 m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
9107 m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
9108 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9109 /* Read M2_N2 registers only for gen < 8 (M2_N2 available for
9110 * gen < 8) and if DRRS is supported (to make sure the
9111 * registers are not unnecessarily read).
9113 if (m2_n2 && INTEL_INFO(dev)->gen < 8 &&
9114 crtc->config->has_drrs) {
9115 m2_n2->link_m = I915_READ(PIPE_LINK_M2(transcoder));
9116 m2_n2->link_n = I915_READ(PIPE_LINK_N2(transcoder));
9117 m2_n2->gmch_m = I915_READ(PIPE_DATA_M2(transcoder))
9119 m2_n2->gmch_n = I915_READ(PIPE_DATA_N2(transcoder));
9120 m2_n2->tu = ((I915_READ(PIPE_DATA_M2(transcoder))
9121 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9124 m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
9125 m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
9126 m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
9128 m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
9129 m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
9130 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9134 void intel_dp_get_m_n(struct intel_crtc *crtc,
9135 struct intel_crtc_state *pipe_config)
9137 if (pipe_config->has_pch_encoder)
9138 intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
9140 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
9141 &pipe_config->dp_m_n,
9142 &pipe_config->dp_m2_n2);
9145 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
9146 struct intel_crtc_state *pipe_config)
9148 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
9149 &pipe_config->fdi_m_n, NULL);
9152 static void skylake_get_pfit_config(struct intel_crtc *crtc,
9153 struct intel_crtc_state *pipe_config)
9155 struct drm_device *dev = crtc->base.dev;
9156 struct drm_i915_private *dev_priv = dev->dev_private;
9157 struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
9158 uint32_t ps_ctrl = 0;
9162 /* find scaler attached to this pipe */
9163 for (i = 0; i < crtc->num_scalers; i++) {
9164 ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
9165 if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
9167 pipe_config->pch_pfit.enabled = true;
9168 pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
9169 pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
9174 scaler_state->scaler_id = id;
9176 scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
9178 scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
9183 skylake_get_initial_plane_config(struct intel_crtc *crtc,
9184 struct intel_initial_plane_config *plane_config)
9186 struct drm_device *dev = crtc->base.dev;
9187 struct drm_i915_private *dev_priv = dev->dev_private;
9188 u32 val, base, offset, stride_mult, tiling;
9189 int pipe = crtc->pipe;
9190 int fourcc, pixel_format;
9191 unsigned int aligned_height;
9192 struct drm_framebuffer *fb;
9193 struct intel_framebuffer *intel_fb;
9195 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
9197 DRM_DEBUG_KMS("failed to alloc fb\n");
9201 fb = &intel_fb->base;
9203 val = I915_READ(PLANE_CTL(pipe, 0));
9204 if (!(val & PLANE_CTL_ENABLE))
9207 pixel_format = val & PLANE_CTL_FORMAT_MASK;
9208 fourcc = skl_format_to_fourcc(pixel_format,
9209 val & PLANE_CTL_ORDER_RGBX,
9210 val & PLANE_CTL_ALPHA_MASK);
9211 fb->pixel_format = fourcc;
9212 fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
9214 tiling = val & PLANE_CTL_TILED_MASK;
9216 case PLANE_CTL_TILED_LINEAR:
9217 fb->modifier[0] = DRM_FORMAT_MOD_NONE;
9219 case PLANE_CTL_TILED_X:
9220 plane_config->tiling = I915_TILING_X;
9221 fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
9223 case PLANE_CTL_TILED_Y:
9224 fb->modifier[0] = I915_FORMAT_MOD_Y_TILED;
9226 case PLANE_CTL_TILED_YF:
9227 fb->modifier[0] = I915_FORMAT_MOD_Yf_TILED;
9230 MISSING_CASE(tiling);
9234 base = I915_READ(PLANE_SURF(pipe, 0)) & 0xfffff000;
9235 plane_config->base = base;
9237 offset = I915_READ(PLANE_OFFSET(pipe, 0));
9239 val = I915_READ(PLANE_SIZE(pipe, 0));
9240 fb->height = ((val >> 16) & 0xfff) + 1;
9241 fb->width = ((val >> 0) & 0x1fff) + 1;
9243 val = I915_READ(PLANE_STRIDE(pipe, 0));
9244 stride_mult = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
9246 fb->pitches[0] = (val & 0x3ff) * stride_mult;
9248 aligned_height = intel_fb_align_height(dev, fb->height,
9252 plane_config->size = fb->pitches[0] * aligned_height;
9254 DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
9255 pipe_name(pipe), fb->width, fb->height,
9256 fb->bits_per_pixel, base, fb->pitches[0],
9257 plane_config->size);
9259 plane_config->fb = intel_fb;
9266 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
9267 struct intel_crtc_state *pipe_config)
9269 struct drm_device *dev = crtc->base.dev;
9270 struct drm_i915_private *dev_priv = dev->dev_private;
9273 tmp = I915_READ(PF_CTL(crtc->pipe));
9275 if (tmp & PF_ENABLE) {
9276 pipe_config->pch_pfit.enabled = true;
9277 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
9278 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
9280 /* We currently do not free assignements of panel fitters on
9281 * ivb/hsw (since we don't use the higher upscaling modes which
9282 * differentiates them) so just WARN about this case for now. */
9284 WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
9285 PF_PIPE_SEL_IVB(crtc->pipe));
9291 ironlake_get_initial_plane_config(struct intel_crtc *crtc,
9292 struct intel_initial_plane_config *plane_config)
9294 struct drm_device *dev = crtc->base.dev;
9295 struct drm_i915_private *dev_priv = dev->dev_private;
9296 u32 val, base, offset;
9297 int pipe = crtc->pipe;
9298 int fourcc, pixel_format;
9299 unsigned int aligned_height;
9300 struct drm_framebuffer *fb;
9301 struct intel_framebuffer *intel_fb;
9303 val = I915_READ(DSPCNTR(pipe));
9304 if (!(val & DISPLAY_PLANE_ENABLE))
9307 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
9309 DRM_DEBUG_KMS("failed to alloc fb\n");
9313 fb = &intel_fb->base;
9315 if (INTEL_INFO(dev)->gen >= 4) {
9316 if (val & DISPPLANE_TILED) {
9317 plane_config->tiling = I915_TILING_X;
9318 fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
9322 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
9323 fourcc = i9xx_format_to_fourcc(pixel_format);
9324 fb->pixel_format = fourcc;
9325 fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
9327 base = I915_READ(DSPSURF(pipe)) & 0xfffff000;
9328 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
9329 offset = I915_READ(DSPOFFSET(pipe));
9331 if (plane_config->tiling)
9332 offset = I915_READ(DSPTILEOFF(pipe));
9334 offset = I915_READ(DSPLINOFF(pipe));
9336 plane_config->base = base;
9338 val = I915_READ(PIPESRC(pipe));
9339 fb->width = ((val >> 16) & 0xfff) + 1;
9340 fb->height = ((val >> 0) & 0xfff) + 1;
9342 val = I915_READ(DSPSTRIDE(pipe));
9343 fb->pitches[0] = val & 0xffffffc0;
9345 aligned_height = intel_fb_align_height(dev, fb->height,
9349 plane_config->size = fb->pitches[0] * aligned_height;
9351 DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
9352 pipe_name(pipe), fb->width, fb->height,
9353 fb->bits_per_pixel, base, fb->pitches[0],
9354 plane_config->size);
9356 plane_config->fb = intel_fb;
9359 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
9360 struct intel_crtc_state *pipe_config)
9362 struct drm_device *dev = crtc->base.dev;
9363 struct drm_i915_private *dev_priv = dev->dev_private;
9364 enum intel_display_power_domain power_domain;
9368 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
9369 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9372 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
9373 pipe_config->shared_dpll = NULL;
9376 tmp = I915_READ(PIPECONF(crtc->pipe));
9377 if (!(tmp & PIPECONF_ENABLE))
9380 switch (tmp & PIPECONF_BPC_MASK) {
9382 pipe_config->pipe_bpp = 18;
9385 pipe_config->pipe_bpp = 24;
9387 case PIPECONF_10BPC:
9388 pipe_config->pipe_bpp = 30;
9390 case PIPECONF_12BPC:
9391 pipe_config->pipe_bpp = 36;
9397 if (tmp & PIPECONF_COLOR_RANGE_SELECT)
9398 pipe_config->limited_color_range = true;
9400 if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
9401 struct intel_shared_dpll *pll;
9402 enum intel_dpll_id pll_id;
9404 pipe_config->has_pch_encoder = true;
9406 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
9407 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
9408 FDI_DP_PORT_WIDTH_SHIFT) + 1;
9410 ironlake_get_fdi_m_n_config(crtc, pipe_config);
9412 if (HAS_PCH_IBX(dev_priv)) {
9414 * The pipe->pch transcoder and pch transcoder->pll
9417 pll_id = (enum intel_dpll_id) crtc->pipe;
9419 tmp = I915_READ(PCH_DPLL_SEL);
9420 if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
9421 pll_id = DPLL_ID_PCH_PLL_B;
9423 pll_id= DPLL_ID_PCH_PLL_A;
9426 pipe_config->shared_dpll =
9427 intel_get_shared_dpll_by_id(dev_priv, pll_id);
9428 pll = pipe_config->shared_dpll;
9430 WARN_ON(!pll->funcs.get_hw_state(dev_priv, pll,
9431 &pipe_config->dpll_hw_state));
9433 tmp = pipe_config->dpll_hw_state.dpll;
9434 pipe_config->pixel_multiplier =
9435 ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
9436 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
9438 ironlake_pch_clock_get(crtc, pipe_config);
9440 pipe_config->pixel_multiplier = 1;
9443 intel_get_pipe_timings(crtc, pipe_config);
9444 intel_get_pipe_src_size(crtc, pipe_config);
9446 ironlake_get_pfit_config(crtc, pipe_config);
9451 intel_display_power_put(dev_priv, power_domain);
9456 static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
9458 struct drm_device *dev = dev_priv->dev;
9459 struct intel_crtc *crtc;
9461 for_each_intel_crtc(dev, crtc)
9462 I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
9463 pipe_name(crtc->pipe));
9465 I915_STATE_WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
9466 I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
9467 I915_STATE_WARN(I915_READ(WRPLL_CTL(0)) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
9468 I915_STATE_WARN(I915_READ(WRPLL_CTL(1)) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
9469 I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
9470 I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
9471 "CPU PWM1 enabled\n");
9472 if (IS_HASWELL(dev))
9473 I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
9474 "CPU PWM2 enabled\n");
9475 I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
9476 "PCH PWM1 enabled\n");
9477 I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
9478 "Utility pin enabled\n");
9479 I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
9482 * In theory we can still leave IRQs enabled, as long as only the HPD
9483 * interrupts remain enabled. We used to check for that, but since it's
9484 * gen-specific and since we only disable LCPLL after we fully disable
9485 * the interrupts, the check below should be enough.
9487 I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
9490 static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
9492 struct drm_device *dev = dev_priv->dev;
9494 if (IS_HASWELL(dev))
9495 return I915_READ(D_COMP_HSW);
9497 return I915_READ(D_COMP_BDW);
9500 static void hsw_write_dcomp(struct drm_i915_private *dev_priv, uint32_t val)
9502 struct drm_device *dev = dev_priv->dev;
9504 if (IS_HASWELL(dev)) {
9505 mutex_lock(&dev_priv->rps.hw_lock);
9506 if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP,
9508 DRM_ERROR("Failed to write to D_COMP\n");
9509 mutex_unlock(&dev_priv->rps.hw_lock);
9511 I915_WRITE(D_COMP_BDW, val);
9512 POSTING_READ(D_COMP_BDW);
9517 * This function implements pieces of two sequences from BSpec:
9518 * - Sequence for display software to disable LCPLL
9519 * - Sequence for display software to allow package C8+
9520 * The steps implemented here are just the steps that actually touch the LCPLL
9521 * register. Callers should take care of disabling all the display engine
9522 * functions, doing the mode unset, fixing interrupts, etc.
9524 static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
9525 bool switch_to_fclk, bool allow_power_down)
9529 assert_can_disable_lcpll(dev_priv);
9531 val = I915_READ(LCPLL_CTL);
9533 if (switch_to_fclk) {
9534 val |= LCPLL_CD_SOURCE_FCLK;
9535 I915_WRITE(LCPLL_CTL, val);
9537 if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
9538 LCPLL_CD_SOURCE_FCLK_DONE, 1))
9539 DRM_ERROR("Switching to FCLK failed\n");
9541 val = I915_READ(LCPLL_CTL);
9544 val |= LCPLL_PLL_DISABLE;
9545 I915_WRITE(LCPLL_CTL, val);
9546 POSTING_READ(LCPLL_CTL);
9548 if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1))
9549 DRM_ERROR("LCPLL still locked\n");
9551 val = hsw_read_dcomp(dev_priv);
9552 val |= D_COMP_COMP_DISABLE;
9553 hsw_write_dcomp(dev_priv, val);
9556 if (wait_for((hsw_read_dcomp(dev_priv) & D_COMP_RCOMP_IN_PROGRESS) == 0,
9558 DRM_ERROR("D_COMP RCOMP still in progress\n");
9560 if (allow_power_down) {
9561 val = I915_READ(LCPLL_CTL);
9562 val |= LCPLL_POWER_DOWN_ALLOW;
9563 I915_WRITE(LCPLL_CTL, val);
9564 POSTING_READ(LCPLL_CTL);
9569 * Fully restores LCPLL, disallowing power down and switching back to LCPLL
9572 static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
9576 val = I915_READ(LCPLL_CTL);
9578 if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
9579 LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
9583 * Make sure we're not on PC8 state before disabling PC8, otherwise
9584 * we'll hang the machine. To prevent PC8 state, just enable force_wake.
9586 intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
9588 if (val & LCPLL_POWER_DOWN_ALLOW) {
9589 val &= ~LCPLL_POWER_DOWN_ALLOW;
9590 I915_WRITE(LCPLL_CTL, val);
9591 POSTING_READ(LCPLL_CTL);
9594 val = hsw_read_dcomp(dev_priv);
9595 val |= D_COMP_COMP_FORCE;
9596 val &= ~D_COMP_COMP_DISABLE;
9597 hsw_write_dcomp(dev_priv, val);
9599 val = I915_READ(LCPLL_CTL);
9600 val &= ~LCPLL_PLL_DISABLE;
9601 I915_WRITE(LCPLL_CTL, val);
9603 if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5))
9604 DRM_ERROR("LCPLL not locked yet\n");
9606 if (val & LCPLL_CD_SOURCE_FCLK) {
9607 val = I915_READ(LCPLL_CTL);
9608 val &= ~LCPLL_CD_SOURCE_FCLK;
9609 I915_WRITE(LCPLL_CTL, val);
9611 if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
9612 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
9613 DRM_ERROR("Switching back to LCPLL failed\n");
9616 intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
9617 intel_update_cdclk(dev_priv->dev);
9621 * Package states C8 and deeper are really deep PC states that can only be
9622 * reached when all the devices on the system allow it, so even if the graphics
9623 * device allows PC8+, it doesn't mean the system will actually get to these
9624 * states. Our driver only allows PC8+ when going into runtime PM.
9626 * The requirements for PC8+ are that all the outputs are disabled, the power
9627 * well is disabled and most interrupts are disabled, and these are also
9628 * requirements for runtime PM. When these conditions are met, we manually do
9629 * the other conditions: disable the interrupts, clocks and switch LCPLL refclk
9630 * to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard
9633 * When we really reach PC8 or deeper states (not just when we allow it) we lose
9634 * the state of some registers, so when we come back from PC8+ we need to
9635 * restore this state. We don't get into PC8+ if we're not in RC6, so we don't
9636 * need to take care of the registers kept by RC6. Notice that this happens even
9637 * if we don't put the device in PCI D3 state (which is what currently happens
9638 * because of the runtime PM support).
9640 * For more, read "Display Sequences for Package C8" on the hardware
9643 void hsw_enable_pc8(struct drm_i915_private *dev_priv)
9645 struct drm_device *dev = dev_priv->dev;
9648 DRM_DEBUG_KMS("Enabling package C8+\n");
9650 if (HAS_PCH_LPT_LP(dev)) {
9651 val = I915_READ(SOUTH_DSPCLK_GATE_D);
9652 val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
9653 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
9656 lpt_disable_clkout_dp(dev);
9657 hsw_disable_lcpll(dev_priv, true, true);
9660 void hsw_disable_pc8(struct drm_i915_private *dev_priv)
9662 struct drm_device *dev = dev_priv->dev;
9665 DRM_DEBUG_KMS("Disabling package C8+\n");
9667 hsw_restore_lcpll(dev_priv);
9668 lpt_init_pch_refclk(dev);
9670 if (HAS_PCH_LPT_LP(dev)) {
9671 val = I915_READ(SOUTH_DSPCLK_GATE_D);
9672 val |= PCH_LP_PARTITION_LEVEL_DISABLE;
9673 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
9677 static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state)
9679 struct drm_device *dev = old_state->dev;
9680 struct intel_atomic_state *old_intel_state =
9681 to_intel_atomic_state(old_state);
9682 unsigned int req_cdclk = old_intel_state->dev_cdclk;
9684 bxt_set_cdclk(to_i915(dev), req_cdclk);
9687 /* compute the max rate for new configuration */
9688 static int ilk_max_pixel_rate(struct drm_atomic_state *state)
9690 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
9691 struct drm_i915_private *dev_priv = state->dev->dev_private;
9692 struct drm_crtc *crtc;
9693 struct drm_crtc_state *cstate;
9694 struct intel_crtc_state *crtc_state;
9695 unsigned max_pixel_rate = 0, i;
9698 memcpy(intel_state->min_pixclk, dev_priv->min_pixclk,
9699 sizeof(intel_state->min_pixclk));
9701 for_each_crtc_in_state(state, crtc, cstate, i) {
9704 crtc_state = to_intel_crtc_state(cstate);
9705 if (!crtc_state->base.enable) {
9706 intel_state->min_pixclk[i] = 0;
9710 pixel_rate = ilk_pipe_pixel_rate(crtc_state);
9712 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
9713 if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled)
9714 pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
9716 intel_state->min_pixclk[i] = pixel_rate;
9719 for_each_pipe(dev_priv, pipe)
9720 max_pixel_rate = max(intel_state->min_pixclk[pipe], max_pixel_rate);
9722 return max_pixel_rate;
9725 static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
9727 struct drm_i915_private *dev_priv = dev->dev_private;
9731 if (WARN((I915_READ(LCPLL_CTL) &
9732 (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
9733 LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
9734 LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
9735 LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
9736 "trying to change cdclk frequency with cdclk not enabled\n"))
9739 mutex_lock(&dev_priv->rps.hw_lock);
9740 ret = sandybridge_pcode_write(dev_priv,
9741 BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
9742 mutex_unlock(&dev_priv->rps.hw_lock);
9744 DRM_ERROR("failed to inform pcode about cdclk change\n");
9748 val = I915_READ(LCPLL_CTL);
9749 val |= LCPLL_CD_SOURCE_FCLK;
9750 I915_WRITE(LCPLL_CTL, val);
9752 if (wait_for_us(I915_READ(LCPLL_CTL) &
9753 LCPLL_CD_SOURCE_FCLK_DONE, 1))
9754 DRM_ERROR("Switching to FCLK failed\n");
9756 val = I915_READ(LCPLL_CTL);
9757 val &= ~LCPLL_CLK_FREQ_MASK;
9761 val |= LCPLL_CLK_FREQ_450;
9765 val |= LCPLL_CLK_FREQ_54O_BDW;
9769 val |= LCPLL_CLK_FREQ_337_5_BDW;
9773 val |= LCPLL_CLK_FREQ_675_BDW;
9777 WARN(1, "invalid cdclk frequency\n");
9781 I915_WRITE(LCPLL_CTL, val);
9783 val = I915_READ(LCPLL_CTL);
9784 val &= ~LCPLL_CD_SOURCE_FCLK;
9785 I915_WRITE(LCPLL_CTL, val);
9787 if (wait_for_us((I915_READ(LCPLL_CTL) &
9788 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
9789 DRM_ERROR("Switching back to LCPLL failed\n");
9791 mutex_lock(&dev_priv->rps.hw_lock);
9792 sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
9793 mutex_unlock(&dev_priv->rps.hw_lock);
9795 I915_WRITE(CDCLK_FREQ, DIV_ROUND_CLOSEST(cdclk, 1000) - 1);
9797 intel_update_cdclk(dev);
9799 WARN(cdclk != dev_priv->cdclk_freq,
9800 "cdclk requested %d kHz but got %d kHz\n",
9801 cdclk, dev_priv->cdclk_freq);
9804 static int broadwell_calc_cdclk(int max_pixclk)
9806 if (max_pixclk > 540000)
9808 else if (max_pixclk > 450000)
9810 else if (max_pixclk > 337500)
9816 static int broadwell_modeset_calc_cdclk(struct drm_atomic_state *state)
9818 struct drm_i915_private *dev_priv = to_i915(state->dev);
9819 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
9820 int max_pixclk = ilk_max_pixel_rate(state);
9824 * FIXME should also account for plane ratio
9825 * once 64bpp pixel formats are supported.
9827 cdclk = broadwell_calc_cdclk(max_pixclk);
9829 if (cdclk > dev_priv->max_cdclk_freq) {
9830 DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
9831 cdclk, dev_priv->max_cdclk_freq);
9835 intel_state->cdclk = intel_state->dev_cdclk = cdclk;
9836 if (!intel_state->active_crtcs)
9837 intel_state->dev_cdclk = broadwell_calc_cdclk(0);
9842 static void broadwell_modeset_commit_cdclk(struct drm_atomic_state *old_state)
9844 struct drm_device *dev = old_state->dev;
9845 struct intel_atomic_state *old_intel_state =
9846 to_intel_atomic_state(old_state);
9847 unsigned req_cdclk = old_intel_state->dev_cdclk;
9849 broadwell_set_cdclk(dev, req_cdclk);
9852 static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
9854 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
9855 struct drm_i915_private *dev_priv = to_i915(state->dev);
9856 const int max_pixclk = ilk_max_pixel_rate(state);
9857 int vco = intel_state->cdclk_pll_vco;
9861 * FIXME should also account for plane ratio
9862 * once 64bpp pixel formats are supported.
9864 cdclk = skl_calc_cdclk(max_pixclk, vco);
9867 * FIXME move the cdclk caclulation to
9868 * compute_config() so we can fail gracegully.
9870 if (cdclk > dev_priv->max_cdclk_freq) {
9871 DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
9872 cdclk, dev_priv->max_cdclk_freq);
9873 cdclk = dev_priv->max_cdclk_freq;
9876 intel_state->cdclk = intel_state->dev_cdclk = cdclk;
9877 if (!intel_state->active_crtcs)
9878 intel_state->dev_cdclk = skl_calc_cdclk(0, vco);
9883 static void skl_modeset_commit_cdclk(struct drm_atomic_state *old_state)
9885 struct drm_i915_private *dev_priv = to_i915(old_state->dev);
9886 struct intel_atomic_state *intel_state = to_intel_atomic_state(old_state);
9887 unsigned int req_cdclk = intel_state->dev_cdclk;
9888 unsigned int req_vco = intel_state->cdclk_pll_vco;
9890 skl_set_cdclk(dev_priv, req_cdclk, req_vco);
9893 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
9894 struct intel_crtc_state *crtc_state)
9896 struct intel_encoder *intel_encoder =
9897 intel_ddi_get_crtc_new_encoder(crtc_state);
9899 if (intel_encoder->type != INTEL_OUTPUT_DSI) {
9900 if (!intel_ddi_pll_select(crtc, crtc_state))
9904 crtc->lowfreq_avail = false;
9909 static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,
9911 struct intel_crtc_state *pipe_config)
9913 enum intel_dpll_id id;
9917 pipe_config->ddi_pll_sel = SKL_DPLL0;
9918 id = DPLL_ID_SKL_DPLL0;
9921 pipe_config->ddi_pll_sel = SKL_DPLL1;
9922 id = DPLL_ID_SKL_DPLL1;
9925 pipe_config->ddi_pll_sel = SKL_DPLL2;
9926 id = DPLL_ID_SKL_DPLL2;
9929 DRM_ERROR("Incorrect port type\n");
9933 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
9936 static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
9938 struct intel_crtc_state *pipe_config)
9940 enum intel_dpll_id id;
9943 temp = I915_READ(DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
9944 pipe_config->ddi_pll_sel = temp >> (port * 3 + 1);
9946 switch (pipe_config->ddi_pll_sel) {
9948 id = DPLL_ID_SKL_DPLL0;
9951 id = DPLL_ID_SKL_DPLL1;
9954 id = DPLL_ID_SKL_DPLL2;
9957 id = DPLL_ID_SKL_DPLL3;
9960 MISSING_CASE(pipe_config->ddi_pll_sel);
9964 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
9967 static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,
9969 struct intel_crtc_state *pipe_config)
9971 enum intel_dpll_id id;
9973 pipe_config->ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
9975 switch (pipe_config->ddi_pll_sel) {
9976 case PORT_CLK_SEL_WRPLL1:
9977 id = DPLL_ID_WRPLL1;
9979 case PORT_CLK_SEL_WRPLL2:
9980 id = DPLL_ID_WRPLL2;
9982 case PORT_CLK_SEL_SPLL:
9985 case PORT_CLK_SEL_LCPLL_810:
9986 id = DPLL_ID_LCPLL_810;
9988 case PORT_CLK_SEL_LCPLL_1350:
9989 id = DPLL_ID_LCPLL_1350;
9991 case PORT_CLK_SEL_LCPLL_2700:
9992 id = DPLL_ID_LCPLL_2700;
9995 MISSING_CASE(pipe_config->ddi_pll_sel);
9997 case PORT_CLK_SEL_NONE:
10001 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
10004 static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
10005 struct intel_crtc_state *pipe_config,
10006 unsigned long *power_domain_mask)
10008 struct drm_device *dev = crtc->base.dev;
10009 struct drm_i915_private *dev_priv = dev->dev_private;
10010 enum intel_display_power_domain power_domain;
10014 * The pipe->transcoder mapping is fixed with the exception of the eDP
10015 * transcoder handled below.
10017 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
10020 * XXX: Do intel_display_power_get_if_enabled before reading this (for
10021 * consistency and less surprising code; it's in always on power).
10023 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
10024 if (tmp & TRANS_DDI_FUNC_ENABLE) {
10025 enum pipe trans_edp_pipe;
10026 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
10028 WARN(1, "unknown pipe linked to edp transcoder\n");
10029 case TRANS_DDI_EDP_INPUT_A_ONOFF:
10030 case TRANS_DDI_EDP_INPUT_A_ON:
10031 trans_edp_pipe = PIPE_A;
10033 case TRANS_DDI_EDP_INPUT_B_ONOFF:
10034 trans_edp_pipe = PIPE_B;
10036 case TRANS_DDI_EDP_INPUT_C_ONOFF:
10037 trans_edp_pipe = PIPE_C;
10041 if (trans_edp_pipe == crtc->pipe)
10042 pipe_config->cpu_transcoder = TRANSCODER_EDP;
10045 power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
10046 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
10048 *power_domain_mask |= BIT(power_domain);
10050 tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
10052 return tmp & PIPECONF_ENABLE;
10055 static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc,
10056 struct intel_crtc_state *pipe_config,
10057 unsigned long *power_domain_mask)
10059 struct drm_device *dev = crtc->base.dev;
10060 struct drm_i915_private *dev_priv = dev->dev_private;
10061 enum intel_display_power_domain power_domain;
10063 enum transcoder cpu_transcoder;
10066 pipe_config->has_dsi_encoder = false;
10068 for_each_port_masked(port, BIT(PORT_A) | BIT(PORT_C)) {
10069 if (port == PORT_A)
10070 cpu_transcoder = TRANSCODER_DSI_A;
10072 cpu_transcoder = TRANSCODER_DSI_C;
10074 power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
10075 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
10077 *power_domain_mask |= BIT(power_domain);
10080 * The PLL needs to be enabled with a valid divider
10081 * configuration, otherwise accessing DSI registers will hang
10082 * the machine. See BSpec North Display Engine
10083 * registers/MIPI[BXT]. We can break out here early, since we
10084 * need the same DSI PLL to be enabled for both DSI ports.
10086 if (!intel_dsi_pll_is_enabled(dev_priv))
10089 /* XXX: this works for video mode only */
10090 tmp = I915_READ(BXT_MIPI_PORT_CTRL(port));
10091 if (!(tmp & DPI_ENABLE))
10094 tmp = I915_READ(MIPI_CTRL(port));
10095 if ((tmp & BXT_PIPE_SELECT_MASK) != BXT_PIPE_SELECT(crtc->pipe))
10098 pipe_config->cpu_transcoder = cpu_transcoder;
10099 pipe_config->has_dsi_encoder = true;
10103 return pipe_config->has_dsi_encoder;
10106 static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
10107 struct intel_crtc_state *pipe_config)
10109 struct drm_device *dev = crtc->base.dev;
10110 struct drm_i915_private *dev_priv = dev->dev_private;
10111 struct intel_shared_dpll *pll;
10115 tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
10117 port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
10119 if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
10120 skylake_get_ddi_pll(dev_priv, port, pipe_config);
10121 else if (IS_BROXTON(dev))
10122 bxt_get_ddi_pll(dev_priv, port, pipe_config);
10124 haswell_get_ddi_pll(dev_priv, port, pipe_config);
10126 pll = pipe_config->shared_dpll;
10128 WARN_ON(!pll->funcs.get_hw_state(dev_priv, pll,
10129 &pipe_config->dpll_hw_state));
10133 * Haswell has only FDI/PCH transcoder A. It is which is connected to
10134 * DDI E. So just check whether this pipe is wired to DDI E and whether
10135 * the PCH transcoder is on.
10137 if (INTEL_INFO(dev)->gen < 9 &&
10138 (port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
10139 pipe_config->has_pch_encoder = true;
10141 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
10142 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
10143 FDI_DP_PORT_WIDTH_SHIFT) + 1;
10145 ironlake_get_fdi_m_n_config(crtc, pipe_config);
10149 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
10150 struct intel_crtc_state *pipe_config)
10152 struct drm_device *dev = crtc->base.dev;
10153 struct drm_i915_private *dev_priv = dev->dev_private;
10154 enum intel_display_power_domain power_domain;
10155 unsigned long power_domain_mask;
10158 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
10159 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
10161 power_domain_mask = BIT(power_domain);
10163 pipe_config->shared_dpll = NULL;
10165 active = hsw_get_transcoder_state(crtc, pipe_config, &power_domain_mask);
10167 if (IS_BROXTON(dev_priv)) {
10168 bxt_get_dsi_transcoder_state(crtc, pipe_config,
10169 &power_domain_mask);
10170 WARN_ON(active && pipe_config->has_dsi_encoder);
10171 if (pipe_config->has_dsi_encoder)
10178 if (!pipe_config->has_dsi_encoder) {
10179 haswell_get_ddi_port_state(crtc, pipe_config);
10180 intel_get_pipe_timings(crtc, pipe_config);
10183 intel_get_pipe_src_size(crtc, pipe_config);
10185 pipe_config->gamma_mode =
10186 I915_READ(GAMMA_MODE(crtc->pipe)) & GAMMA_MODE_MODE_MASK;
10188 if (INTEL_INFO(dev)->gen >= 9) {
10189 skl_init_scalers(dev, crtc, pipe_config);
10192 if (INTEL_INFO(dev)->gen >= 9) {
10193 pipe_config->scaler_state.scaler_id = -1;
10194 pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
10197 power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
10198 if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
10199 power_domain_mask |= BIT(power_domain);
10200 if (INTEL_INFO(dev)->gen >= 9)
10201 skylake_get_pfit_config(crtc, pipe_config);
10203 ironlake_get_pfit_config(crtc, pipe_config);
10206 if (IS_HASWELL(dev))
10207 pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
10208 (I915_READ(IPS_CTL) & IPS_ENABLE);
10210 if (pipe_config->cpu_transcoder != TRANSCODER_EDP &&
10211 !transcoder_is_dsi(pipe_config->cpu_transcoder)) {
10212 pipe_config->pixel_multiplier =
10213 I915_READ(PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
10215 pipe_config->pixel_multiplier = 1;
10219 for_each_power_domain(power_domain, power_domain_mask)
10220 intel_display_power_put(dev_priv, power_domain);
10225 static void i845_update_cursor(struct drm_crtc *crtc, u32 base,
10226 const struct intel_plane_state *plane_state)
10228 struct drm_device *dev = crtc->dev;
10229 struct drm_i915_private *dev_priv = dev->dev_private;
10230 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10231 uint32_t cntl = 0, size = 0;
10233 if (plane_state && plane_state->visible) {
10234 unsigned int width = plane_state->base.crtc_w;
10235 unsigned int height = plane_state->base.crtc_h;
10236 unsigned int stride = roundup_pow_of_two(width) * 4;
10240 WARN_ONCE(1, "Invalid cursor width/stride, width=%u, stride=%u\n",
10251 cntl |= CURSOR_ENABLE |
10252 CURSOR_GAMMA_ENABLE |
10253 CURSOR_FORMAT_ARGB |
10254 CURSOR_STRIDE(stride);
10256 size = (height << 12) | width;
10259 if (intel_crtc->cursor_cntl != 0 &&
10260 (intel_crtc->cursor_base != base ||
10261 intel_crtc->cursor_size != size ||
10262 intel_crtc->cursor_cntl != cntl)) {
10263 /* On these chipsets we can only modify the base/size/stride
10264 * whilst the cursor is disabled.
10266 I915_WRITE(CURCNTR(PIPE_A), 0);
10267 POSTING_READ(CURCNTR(PIPE_A));
10268 intel_crtc->cursor_cntl = 0;
10271 if (intel_crtc->cursor_base != base) {
10272 I915_WRITE(CURBASE(PIPE_A), base);
10273 intel_crtc->cursor_base = base;
10276 if (intel_crtc->cursor_size != size) {
10277 I915_WRITE(CURSIZE, size);
10278 intel_crtc->cursor_size = size;
10281 if (intel_crtc->cursor_cntl != cntl) {
10282 I915_WRITE(CURCNTR(PIPE_A), cntl);
10283 POSTING_READ(CURCNTR(PIPE_A));
10284 intel_crtc->cursor_cntl = cntl;
10288 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base,
10289 const struct intel_plane_state *plane_state)
10291 struct drm_device *dev = crtc->dev;
10292 struct drm_i915_private *dev_priv = dev->dev_private;
10293 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10294 int pipe = intel_crtc->pipe;
10297 if (plane_state && plane_state->visible) {
10298 cntl = MCURSOR_GAMMA_ENABLE;
10299 switch (plane_state->base.crtc_w) {
10301 cntl |= CURSOR_MODE_64_ARGB_AX;
10304 cntl |= CURSOR_MODE_128_ARGB_AX;
10307 cntl |= CURSOR_MODE_256_ARGB_AX;
10310 MISSING_CASE(plane_state->base.crtc_w);
10313 cntl |= pipe << 28; /* Connect to correct pipe */
10316 cntl |= CURSOR_PIPE_CSC_ENABLE;
10318 if (plane_state->base.rotation == BIT(DRM_ROTATE_180))
10319 cntl |= CURSOR_ROTATE_180;
10322 if (intel_crtc->cursor_cntl != cntl) {
10323 I915_WRITE(CURCNTR(pipe), cntl);
10324 POSTING_READ(CURCNTR(pipe));
10325 intel_crtc->cursor_cntl = cntl;
10328 /* and commit changes on next vblank */
10329 I915_WRITE(CURBASE(pipe), base);
10330 POSTING_READ(CURBASE(pipe));
10332 intel_crtc->cursor_base = base;
10335 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
10336 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
10337 const struct intel_plane_state *plane_state)
10339 struct drm_device *dev = crtc->dev;
10340 struct drm_i915_private *dev_priv = dev->dev_private;
10341 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10342 int pipe = intel_crtc->pipe;
10343 u32 base = intel_crtc->cursor_addr;
10347 int x = plane_state->base.crtc_x;
10348 int y = plane_state->base.crtc_y;
10351 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
10354 pos |= x << CURSOR_X_SHIFT;
10357 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
10360 pos |= y << CURSOR_Y_SHIFT;
10362 /* ILK+ do this automagically */
10363 if (HAS_GMCH_DISPLAY(dev) &&
10364 plane_state->base.rotation == BIT(DRM_ROTATE_180)) {
10365 base += (plane_state->base.crtc_h *
10366 plane_state->base.crtc_w - 1) * 4;
10370 I915_WRITE(CURPOS(pipe), pos);
10372 if (IS_845G(dev) || IS_I865G(dev))
10373 i845_update_cursor(crtc, base, plane_state);
10375 i9xx_update_cursor(crtc, base, plane_state);
10378 static bool cursor_size_ok(struct drm_device *dev,
10379 uint32_t width, uint32_t height)
10381 if (width == 0 || height == 0)
10385 * 845g/865g are special in that they are only limited by
10386 * the width of their cursors, the height is arbitrary up to
10387 * the precision of the register. Everything else requires
10388 * square cursors, limited to a few power-of-two sizes.
10390 if (IS_845G(dev) || IS_I865G(dev)) {
10391 if ((width & 63) != 0)
10394 if (width > (IS_845G(dev) ? 64 : 512))
10400 switch (width | height) {
10415 /* VESA 640x480x72Hz mode to set on the pipe */
10416 static struct drm_display_mode load_detect_mode = {
10417 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
10418 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
10421 struct drm_framebuffer *
10422 __intel_framebuffer_create(struct drm_device *dev,
10423 struct drm_mode_fb_cmd2 *mode_cmd,
10424 struct drm_i915_gem_object *obj)
10426 struct intel_framebuffer *intel_fb;
10429 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
10431 return ERR_PTR(-ENOMEM);
10433 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
10437 return &intel_fb->base;
10441 return ERR_PTR(ret);
10444 static struct drm_framebuffer *
10445 intel_framebuffer_create(struct drm_device *dev,
10446 struct drm_mode_fb_cmd2 *mode_cmd,
10447 struct drm_i915_gem_object *obj)
10449 struct drm_framebuffer *fb;
10452 ret = i915_mutex_lock_interruptible(dev);
10454 return ERR_PTR(ret);
10455 fb = __intel_framebuffer_create(dev, mode_cmd, obj);
10456 mutex_unlock(&dev->struct_mutex);
10462 intel_framebuffer_pitch_for_width(int width, int bpp)
10464 u32 pitch = DIV_ROUND_UP(width * bpp, 8);
10465 return ALIGN(pitch, 64);
10469 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
10471 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
10472 return PAGE_ALIGN(pitch * mode->vdisplay);
10475 static struct drm_framebuffer *
10476 intel_framebuffer_create_for_mode(struct drm_device *dev,
10477 struct drm_display_mode *mode,
10478 int depth, int bpp)
10480 struct drm_framebuffer *fb;
10481 struct drm_i915_gem_object *obj;
10482 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
10484 obj = i915_gem_object_create(dev,
10485 intel_framebuffer_size_for_mode(mode, bpp));
10487 return ERR_CAST(obj);
10489 mode_cmd.width = mode->hdisplay;
10490 mode_cmd.height = mode->vdisplay;
10491 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
10493 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
10495 fb = intel_framebuffer_create(dev, &mode_cmd, obj);
10497 drm_gem_object_unreference_unlocked(&obj->base);
10502 static struct drm_framebuffer *
10503 mode_fits_in_fbdev(struct drm_device *dev,
10504 struct drm_display_mode *mode)
10506 #ifdef CONFIG_DRM_FBDEV_EMULATION
10507 struct drm_i915_private *dev_priv = dev->dev_private;
10508 struct drm_i915_gem_object *obj;
10509 struct drm_framebuffer *fb;
10511 if (!dev_priv->fbdev)
10514 if (!dev_priv->fbdev->fb)
10517 obj = dev_priv->fbdev->fb->obj;
10520 fb = &dev_priv->fbdev->fb->base;
10521 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
10522 fb->bits_per_pixel))
10525 if (obj->base.size < mode->vdisplay * fb->pitches[0])
10528 drm_framebuffer_reference(fb);
10535 static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
10536 struct drm_crtc *crtc,
10537 struct drm_display_mode *mode,
10538 struct drm_framebuffer *fb,
10541 struct drm_plane_state *plane_state;
10542 int hdisplay, vdisplay;
10545 plane_state = drm_atomic_get_plane_state(state, crtc->primary);
10546 if (IS_ERR(plane_state))
10547 return PTR_ERR(plane_state);
10550 drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
10552 hdisplay = vdisplay = 0;
10554 ret = drm_atomic_set_crtc_for_plane(plane_state, fb ? crtc : NULL);
10557 drm_atomic_set_fb_for_plane(plane_state, fb);
10558 plane_state->crtc_x = 0;
10559 plane_state->crtc_y = 0;
10560 plane_state->crtc_w = hdisplay;
10561 plane_state->crtc_h = vdisplay;
10562 plane_state->src_x = x << 16;
10563 plane_state->src_y = y << 16;
10564 plane_state->src_w = hdisplay << 16;
10565 plane_state->src_h = vdisplay << 16;
10570 bool intel_get_load_detect_pipe(struct drm_connector *connector,
10571 struct drm_display_mode *mode,
10572 struct intel_load_detect_pipe *old,
10573 struct drm_modeset_acquire_ctx *ctx)
10575 struct intel_crtc *intel_crtc;
10576 struct intel_encoder *intel_encoder =
10577 intel_attached_encoder(connector);
10578 struct drm_crtc *possible_crtc;
10579 struct drm_encoder *encoder = &intel_encoder->base;
10580 struct drm_crtc *crtc = NULL;
10581 struct drm_device *dev = encoder->dev;
10582 struct drm_framebuffer *fb;
10583 struct drm_mode_config *config = &dev->mode_config;
10584 struct drm_atomic_state *state = NULL, *restore_state = NULL;
10585 struct drm_connector_state *connector_state;
10586 struct intel_crtc_state *crtc_state;
10589 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
10590 connector->base.id, connector->name,
10591 encoder->base.id, encoder->name);
10593 old->restore_state = NULL;
10596 ret = drm_modeset_lock(&config->connection_mutex, ctx);
10601 * Algorithm gets a little messy:
10603 * - if the connector already has an assigned crtc, use it (but make
10604 * sure it's on first)
10606 * - try to find the first unused crtc that can drive this connector,
10607 * and use that if we find one
10610 /* See if we already have a CRTC for this connector */
10611 if (connector->state->crtc) {
10612 crtc = connector->state->crtc;
10614 ret = drm_modeset_lock(&crtc->mutex, ctx);
10618 /* Make sure the crtc and connector are running */
10622 /* Find an unused one (if possible) */
10623 for_each_crtc(dev, possible_crtc) {
10625 if (!(encoder->possible_crtcs & (1 << i)))
10628 ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
10632 if (possible_crtc->state->enable) {
10633 drm_modeset_unlock(&possible_crtc->mutex);
10637 crtc = possible_crtc;
10642 * If we didn't find an unused CRTC, don't use any.
10645 DRM_DEBUG_KMS("no pipe available for load-detect\n");
10650 intel_crtc = to_intel_crtc(crtc);
10652 ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
10656 state = drm_atomic_state_alloc(dev);
10657 restore_state = drm_atomic_state_alloc(dev);
10658 if (!state || !restore_state) {
10663 state->acquire_ctx = ctx;
10664 restore_state->acquire_ctx = ctx;
10666 connector_state = drm_atomic_get_connector_state(state, connector);
10667 if (IS_ERR(connector_state)) {
10668 ret = PTR_ERR(connector_state);
10672 ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
10676 crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
10677 if (IS_ERR(crtc_state)) {
10678 ret = PTR_ERR(crtc_state);
10682 crtc_state->base.active = crtc_state->base.enable = true;
10685 mode = &load_detect_mode;
10687 /* We need a framebuffer large enough to accommodate all accesses
10688 * that the plane may generate whilst we perform load detection.
10689 * We can not rely on the fbcon either being present (we get called
10690 * during its initialisation to detect all boot displays, or it may
10691 * not even exist) or that it is large enough to satisfy the
10694 fb = mode_fits_in_fbdev(dev, mode);
10696 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
10697 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
10699 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
10701 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
10705 ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
10709 drm_framebuffer_unreference(fb);
10711 ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
10715 ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
10717 ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
10719 ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(restore_state, crtc->primary));
10721 DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
10725 ret = drm_atomic_commit(state);
10727 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
10731 old->restore_state = restore_state;
10733 /* let the connector get through one full cycle before testing */
10734 intel_wait_for_vblank(dev, intel_crtc->pipe);
10738 drm_atomic_state_free(state);
10739 drm_atomic_state_free(restore_state);
10740 restore_state = state = NULL;
10742 if (ret == -EDEADLK) {
10743 drm_modeset_backoff(ctx);
10750 void intel_release_load_detect_pipe(struct drm_connector *connector,
10751 struct intel_load_detect_pipe *old,
10752 struct drm_modeset_acquire_ctx *ctx)
10754 struct intel_encoder *intel_encoder =
10755 intel_attached_encoder(connector);
10756 struct drm_encoder *encoder = &intel_encoder->base;
10757 struct drm_atomic_state *state = old->restore_state;
10760 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
10761 connector->base.id, connector->name,
10762 encoder->base.id, encoder->name);
10767 ret = drm_atomic_commit(state);
10769 DRM_DEBUG_KMS("Couldn't release load detect pipe: %i\n", ret);
10770 drm_atomic_state_free(state);
10774 static int i9xx_pll_refclk(struct drm_device *dev,
10775 const struct intel_crtc_state *pipe_config)
10777 struct drm_i915_private *dev_priv = dev->dev_private;
10778 u32 dpll = pipe_config->dpll_hw_state.dpll;
10780 if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
10781 return dev_priv->vbt.lvds_ssc_freq;
10782 else if (HAS_PCH_SPLIT(dev))
10784 else if (!IS_GEN2(dev))
10790 /* Returns the clock of the currently programmed mode of the given pipe. */
10791 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
10792 struct intel_crtc_state *pipe_config)
10794 struct drm_device *dev = crtc->base.dev;
10795 struct drm_i915_private *dev_priv = dev->dev_private;
10796 int pipe = pipe_config->cpu_transcoder;
10797 u32 dpll = pipe_config->dpll_hw_state.dpll;
10801 int refclk = i9xx_pll_refclk(dev, pipe_config);
10803 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
10804 fp = pipe_config->dpll_hw_state.fp0;
10806 fp = pipe_config->dpll_hw_state.fp1;
10808 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
10809 if (IS_PINEVIEW(dev)) {
10810 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
10811 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
10813 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
10814 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
10817 if (!IS_GEN2(dev)) {
10818 if (IS_PINEVIEW(dev))
10819 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
10820 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
10822 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
10823 DPLL_FPA01_P1_POST_DIV_SHIFT);
10825 switch (dpll & DPLL_MODE_MASK) {
10826 case DPLLB_MODE_DAC_SERIAL:
10827 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
10830 case DPLLB_MODE_LVDS:
10831 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
10835 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
10836 "mode\n", (int)(dpll & DPLL_MODE_MASK));
10840 if (IS_PINEVIEW(dev))
10841 port_clock = pnv_calc_dpll_params(refclk, &clock);
10843 port_clock = i9xx_calc_dpll_params(refclk, &clock);
10845 u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
10846 bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
10849 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
10850 DPLL_FPA01_P1_POST_DIV_SHIFT);
10852 if (lvds & LVDS_CLKB_POWER_UP)
10857 if (dpll & PLL_P1_DIVIDE_BY_TWO)
10860 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
10861 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
10863 if (dpll & PLL_P2_DIVIDE_BY_4)
10869 port_clock = i9xx_calc_dpll_params(refclk, &clock);
10873 * This value includes pixel_multiplier. We will use
10874 * port_clock to compute adjusted_mode.crtc_clock in the
10875 * encoder's get_config() function.
10877 pipe_config->port_clock = port_clock;
10880 int intel_dotclock_calculate(int link_freq,
10881 const struct intel_link_m_n *m_n)
10884 * The calculation for the data clock is:
10885 * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
10886 * But we want to avoid losing precison if possible, so:
10887 * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
10889 * and the link clock is simpler:
10890 * link_clock = (m * link_clock) / n
10896 return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
10899 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
10900 struct intel_crtc_state *pipe_config)
10902 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
10904 /* read out port_clock from the DPLL */
10905 i9xx_crtc_clock_get(crtc, pipe_config);
10908 * In case there is an active pipe without active ports,
10909 * we may need some idea for the dotclock anyway.
10910 * Calculate one based on the FDI configuration.
10912 pipe_config->base.adjusted_mode.crtc_clock =
10913 intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
10914 &pipe_config->fdi_m_n);
10917 /** Returns the currently programmed mode of the given pipe. */
10918 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
10919 struct drm_crtc *crtc)
10921 struct drm_i915_private *dev_priv = dev->dev_private;
10922 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10923 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
10924 struct drm_display_mode *mode;
10925 struct intel_crtc_state *pipe_config;
10926 int htot = I915_READ(HTOTAL(cpu_transcoder));
10927 int hsync = I915_READ(HSYNC(cpu_transcoder));
10928 int vtot = I915_READ(VTOTAL(cpu_transcoder));
10929 int vsync = I915_READ(VSYNC(cpu_transcoder));
10930 enum pipe pipe = intel_crtc->pipe;
10932 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
10936 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
10937 if (!pipe_config) {
10943 * Construct a pipe_config sufficient for getting the clock info
10944 * back out of crtc_clock_get.
10946 * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
10947 * to use a real value here instead.
10949 pipe_config->cpu_transcoder = (enum transcoder) pipe;
10950 pipe_config->pixel_multiplier = 1;
10951 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(pipe));
10952 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(pipe));
10953 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(pipe));
10954 i9xx_crtc_clock_get(intel_crtc, pipe_config);
10956 mode->clock = pipe_config->port_clock / pipe_config->pixel_multiplier;
10957 mode->hdisplay = (htot & 0xffff) + 1;
10958 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
10959 mode->hsync_start = (hsync & 0xffff) + 1;
10960 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
10961 mode->vdisplay = (vtot & 0xffff) + 1;
10962 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
10963 mode->vsync_start = (vsync & 0xffff) + 1;
10964 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
10966 drm_mode_set_name(mode);
10968 kfree(pipe_config);
10973 void intel_mark_busy(struct drm_i915_private *dev_priv)
10975 if (dev_priv->mm.busy)
10978 intel_runtime_pm_get(dev_priv);
10979 i915_update_gfx_val(dev_priv);
10980 if (INTEL_GEN(dev_priv) >= 6)
10981 gen6_rps_busy(dev_priv);
10982 dev_priv->mm.busy = true;
10985 void intel_mark_idle(struct drm_i915_private *dev_priv)
10987 if (!dev_priv->mm.busy)
10990 dev_priv->mm.busy = false;
10992 if (INTEL_GEN(dev_priv) >= 6)
10993 gen6_rps_idle(dev_priv);
10995 intel_runtime_pm_put(dev_priv);
10998 static void intel_crtc_destroy(struct drm_crtc *crtc)
11000 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11001 struct drm_device *dev = crtc->dev;
11002 struct intel_flip_work *work;
11004 spin_lock_irq(&dev->event_lock);
11005 work = intel_crtc->flip_work;
11006 intel_crtc->flip_work = NULL;
11007 spin_unlock_irq(&dev->event_lock);
11010 cancel_work_sync(&work->mmio_work);
11011 cancel_work_sync(&work->unpin_work);
11015 drm_crtc_cleanup(crtc);
11020 static void intel_unpin_work_fn(struct work_struct *__work)
11022 struct intel_flip_work *work =
11023 container_of(__work, struct intel_flip_work, unpin_work);
11024 struct intel_crtc *crtc = to_intel_crtc(work->crtc);
11025 struct drm_device *dev = crtc->base.dev;
11026 struct drm_plane *primary = crtc->base.primary;
11028 if (is_mmio_work(work))
11029 flush_work(&work->mmio_work);
11031 mutex_lock(&dev->struct_mutex);
11032 intel_unpin_fb_obj(work->old_fb, primary->state->rotation);
11033 drm_gem_object_unreference(&work->pending_flip_obj->base);
11035 if (work->flip_queued_req)
11036 i915_gem_request_assign(&work->flip_queued_req, NULL);
11037 mutex_unlock(&dev->struct_mutex);
11039 intel_frontbuffer_flip_complete(dev, to_intel_plane(primary)->frontbuffer_bit);
11040 intel_fbc_post_update(crtc);
11041 drm_framebuffer_unreference(work->old_fb);
11043 BUG_ON(atomic_read(&crtc->unpin_work_count) == 0);
11044 atomic_dec(&crtc->unpin_work_count);
11049 /* Is 'a' after or equal to 'b'? */
11050 static bool g4x_flip_count_after_eq(u32 a, u32 b)
11052 return !((a - b) & 0x80000000);
11055 static bool __pageflip_finished_cs(struct intel_crtc *crtc,
11056 struct intel_flip_work *work)
11058 struct drm_device *dev = crtc->base.dev;
11059 struct drm_i915_private *dev_priv = dev->dev_private;
11060 unsigned reset_counter;
11062 reset_counter = i915_reset_counter(&dev_priv->gpu_error);
11063 if (crtc->reset_counter != reset_counter)
11067 * The relevant registers doen't exist on pre-ctg.
11068 * As the flip done interrupt doesn't trigger for mmio
11069 * flips on gmch platforms, a flip count check isn't
11070 * really needed there. But since ctg has the registers,
11071 * include it in the check anyway.
11073 if (INTEL_INFO(dev)->gen < 5 && !IS_G4X(dev))
11077 * BDW signals flip done immediately if the plane
11078 * is disabled, even if the plane enable is already
11079 * armed to occur at the next vblank :(
11083 * A DSPSURFLIVE check isn't enough in case the mmio and CS flips
11084 * used the same base address. In that case the mmio flip might
11085 * have completed, but the CS hasn't even executed the flip yet.
11087 * A flip count check isn't enough as the CS might have updated
11088 * the base address just after start of vblank, but before we
11089 * managed to process the interrupt. This means we'd complete the
11090 * CS flip too soon.
11092 * Combining both checks should get us a good enough result. It may
11093 * still happen that the CS flip has been executed, but has not
11094 * yet actually completed. But in case the base address is the same
11095 * anyway, we don't really care.
11097 return (I915_READ(DSPSURFLIVE(crtc->plane)) & ~0xfff) ==
11098 crtc->flip_work->gtt_offset &&
11099 g4x_flip_count_after_eq(I915_READ(PIPE_FLIPCOUNT_G4X(crtc->pipe)),
11100 crtc->flip_work->flip_count);
11104 __pageflip_finished_mmio(struct intel_crtc *crtc,
11105 struct intel_flip_work *work)
11108 * MMIO work completes when vblank is different from
11109 * flip_queued_vblank.
11111 * Reset counter value doesn't matter, this is handled by
11112 * i915_wait_request finishing early, so no need to handle
11115 return intel_crtc_get_vblank_counter(crtc) != work->flip_queued_vblank;
11119 static bool pageflip_finished(struct intel_crtc *crtc,
11120 struct intel_flip_work *work)
11122 if (!atomic_read(&work->pending))
11127 if (is_mmio_work(work))
11128 return __pageflip_finished_mmio(crtc, work);
11130 return __pageflip_finished_cs(crtc, work);
11133 void intel_finish_page_flip_cs(struct drm_i915_private *dev_priv, int pipe)
11135 struct drm_device *dev = dev_priv->dev;
11136 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
11137 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11138 struct intel_flip_work *work;
11139 unsigned long flags;
11141 /* Ignore early vblank irqs */
11146 * This is called both by irq handlers and the reset code (to complete
11147 * lost pageflips) so needs the full irqsave spinlocks.
11149 spin_lock_irqsave(&dev->event_lock, flags);
11150 work = intel_crtc->flip_work;
11152 if (work != NULL &&
11153 !is_mmio_work(work) &&
11154 pageflip_finished(intel_crtc, work))
11155 page_flip_completed(intel_crtc);
11157 spin_unlock_irqrestore(&dev->event_lock, flags);
11160 void intel_finish_page_flip_mmio(struct drm_i915_private *dev_priv, int pipe)
11162 struct drm_device *dev = dev_priv->dev;
11163 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
11164 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11165 struct intel_flip_work *work;
11166 unsigned long flags;
11168 /* Ignore early vblank irqs */
11173 * This is called both by irq handlers and the reset code (to complete
11174 * lost pageflips) so needs the full irqsave spinlocks.
11176 spin_lock_irqsave(&dev->event_lock, flags);
11177 work = intel_crtc->flip_work;
11179 if (work != NULL &&
11180 is_mmio_work(work) &&
11181 pageflip_finished(intel_crtc, work))
11182 page_flip_completed(intel_crtc);
11184 spin_unlock_irqrestore(&dev->event_lock, flags);
11187 static inline void intel_mark_page_flip_active(struct intel_crtc *crtc,
11188 struct intel_flip_work *work)
11190 work->flip_queued_vblank = intel_crtc_get_vblank_counter(crtc);
11192 /* Ensure that the work item is consistent when activating it ... */
11193 smp_mb__before_atomic();
11194 atomic_set(&work->pending, 1);
11197 static int intel_gen2_queue_flip(struct drm_device *dev,
11198 struct drm_crtc *crtc,
11199 struct drm_framebuffer *fb,
11200 struct drm_i915_gem_object *obj,
11201 struct drm_i915_gem_request *req,
11204 struct intel_engine_cs *engine = req->engine;
11205 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11209 ret = intel_ring_begin(req, 6);
11213 /* Can't queue multiple flips, so wait for the previous
11214 * one to finish before executing the next.
11216 if (intel_crtc->plane)
11217 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
11219 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
11220 intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
11221 intel_ring_emit(engine, MI_NOOP);
11222 intel_ring_emit(engine, MI_DISPLAY_FLIP |
11223 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11224 intel_ring_emit(engine, fb->pitches[0]);
11225 intel_ring_emit(engine, intel_crtc->flip_work->gtt_offset);
11226 intel_ring_emit(engine, 0); /* aux display base address, unused */
11231 static int intel_gen3_queue_flip(struct drm_device *dev,
11232 struct drm_crtc *crtc,
11233 struct drm_framebuffer *fb,
11234 struct drm_i915_gem_object *obj,
11235 struct drm_i915_gem_request *req,
11238 struct intel_engine_cs *engine = req->engine;
11239 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11243 ret = intel_ring_begin(req, 6);
11247 if (intel_crtc->plane)
11248 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
11250 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
11251 intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
11252 intel_ring_emit(engine, MI_NOOP);
11253 intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 |
11254 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11255 intel_ring_emit(engine, fb->pitches[0]);
11256 intel_ring_emit(engine, intel_crtc->flip_work->gtt_offset);
11257 intel_ring_emit(engine, MI_NOOP);
11262 static int intel_gen4_queue_flip(struct drm_device *dev,
11263 struct drm_crtc *crtc,
11264 struct drm_framebuffer *fb,
11265 struct drm_i915_gem_object *obj,
11266 struct drm_i915_gem_request *req,
11269 struct intel_engine_cs *engine = req->engine;
11270 struct drm_i915_private *dev_priv = dev->dev_private;
11271 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11272 uint32_t pf, pipesrc;
11275 ret = intel_ring_begin(req, 4);
11279 /* i965+ uses the linear or tiled offsets from the
11280 * Display Registers (which do not change across a page-flip)
11281 * so we need only reprogram the base address.
11283 intel_ring_emit(engine, MI_DISPLAY_FLIP |
11284 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11285 intel_ring_emit(engine, fb->pitches[0]);
11286 intel_ring_emit(engine, intel_crtc->flip_work->gtt_offset |
11289 /* XXX Enabling the panel-fitter across page-flip is so far
11290 * untested on non-native modes, so ignore it for now.
11291 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
11294 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
11295 intel_ring_emit(engine, pf | pipesrc);
11300 static int intel_gen6_queue_flip(struct drm_device *dev,
11301 struct drm_crtc *crtc,
11302 struct drm_framebuffer *fb,
11303 struct drm_i915_gem_object *obj,
11304 struct drm_i915_gem_request *req,
11307 struct intel_engine_cs *engine = req->engine;
11308 struct drm_i915_private *dev_priv = dev->dev_private;
11309 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11310 uint32_t pf, pipesrc;
11313 ret = intel_ring_begin(req, 4);
11317 intel_ring_emit(engine, MI_DISPLAY_FLIP |
11318 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11319 intel_ring_emit(engine, fb->pitches[0] | obj->tiling_mode);
11320 intel_ring_emit(engine, intel_crtc->flip_work->gtt_offset);
11322 /* Contrary to the suggestions in the documentation,
11323 * "Enable Panel Fitter" does not seem to be required when page
11324 * flipping with a non-native mode, and worse causes a normal
11326 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
11329 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
11330 intel_ring_emit(engine, pf | pipesrc);
11335 static int intel_gen7_queue_flip(struct drm_device *dev,
11336 struct drm_crtc *crtc,
11337 struct drm_framebuffer *fb,
11338 struct drm_i915_gem_object *obj,
11339 struct drm_i915_gem_request *req,
11342 struct intel_engine_cs *engine = req->engine;
11343 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11344 uint32_t plane_bit = 0;
11347 switch (intel_crtc->plane) {
11349 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
11352 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
11355 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
11358 WARN_ONCE(1, "unknown plane in flip command\n");
11363 if (engine->id == RCS) {
11366 * On Gen 8, SRM is now taking an extra dword to accommodate
11367 * 48bits addresses, and we need a NOOP for the batch size to
11375 * BSpec MI_DISPLAY_FLIP for IVB:
11376 * "The full packet must be contained within the same cache line."
11378 * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
11379 * cacheline, if we ever start emitting more commands before
11380 * the MI_DISPLAY_FLIP we may need to first emit everything else,
11381 * then do the cacheline alignment, and finally emit the
11384 ret = intel_ring_cacheline_align(req);
11388 ret = intel_ring_begin(req, len);
11392 /* Unmask the flip-done completion message. Note that the bspec says that
11393 * we should do this for both the BCS and RCS, and that we must not unmask
11394 * more than one flip event at any time (or ensure that one flip message
11395 * can be sent by waiting for flip-done prior to queueing new flips).
11396 * Experimentation says that BCS works despite DERRMR masking all
11397 * flip-done completion events and that unmasking all planes at once
11398 * for the RCS also doesn't appear to drop events. Setting the DERRMR
11399 * to zero does lead to lockups within MI_DISPLAY_FLIP.
11401 if (engine->id == RCS) {
11402 intel_ring_emit(engine, MI_LOAD_REGISTER_IMM(1));
11403 intel_ring_emit_reg(engine, DERRMR);
11404 intel_ring_emit(engine, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
11405 DERRMR_PIPEB_PRI_FLIP_DONE |
11406 DERRMR_PIPEC_PRI_FLIP_DONE));
11408 intel_ring_emit(engine, MI_STORE_REGISTER_MEM_GEN8 |
11409 MI_SRM_LRM_GLOBAL_GTT);
11411 intel_ring_emit(engine, MI_STORE_REGISTER_MEM |
11412 MI_SRM_LRM_GLOBAL_GTT);
11413 intel_ring_emit_reg(engine, DERRMR);
11414 intel_ring_emit(engine, engine->scratch.gtt_offset + 256);
11415 if (IS_GEN8(dev)) {
11416 intel_ring_emit(engine, 0);
11417 intel_ring_emit(engine, MI_NOOP);
11421 intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 | plane_bit);
11422 intel_ring_emit(engine, (fb->pitches[0] | obj->tiling_mode));
11423 intel_ring_emit(engine, intel_crtc->flip_work->gtt_offset);
11424 intel_ring_emit(engine, (MI_NOOP));
11429 static bool use_mmio_flip(struct intel_engine_cs *engine,
11430 struct drm_i915_gem_object *obj)
11433 * This is not being used for older platforms, because
11434 * non-availability of flip done interrupt forces us to use
11435 * CS flips. Older platforms derive flip done using some clever
11436 * tricks involving the flip_pending status bits and vblank irqs.
11437 * So using MMIO flips there would disrupt this mechanism.
11440 if (engine == NULL)
11443 if (INTEL_GEN(engine->i915) < 5)
11446 if (i915.use_mmio_flip < 0)
11448 else if (i915.use_mmio_flip > 0)
11450 else if (i915.enable_execlists)
11452 else if (obj->base.dma_buf &&
11453 !reservation_object_test_signaled_rcu(obj->base.dma_buf->resv,
11457 return engine != i915_gem_request_get_engine(obj->last_write_req);
11460 static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
11461 unsigned int rotation,
11462 struct intel_flip_work *work)
11464 struct drm_device *dev = intel_crtc->base.dev;
11465 struct drm_i915_private *dev_priv = dev->dev_private;
11466 struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
11467 const enum pipe pipe = intel_crtc->pipe;
11468 u32 ctl, stride, tile_height;
11470 ctl = I915_READ(PLANE_CTL(pipe, 0));
11471 ctl &= ~PLANE_CTL_TILED_MASK;
11472 switch (fb->modifier[0]) {
11473 case DRM_FORMAT_MOD_NONE:
11475 case I915_FORMAT_MOD_X_TILED:
11476 ctl |= PLANE_CTL_TILED_X;
11478 case I915_FORMAT_MOD_Y_TILED:
11479 ctl |= PLANE_CTL_TILED_Y;
11481 case I915_FORMAT_MOD_Yf_TILED:
11482 ctl |= PLANE_CTL_TILED_YF;
11485 MISSING_CASE(fb->modifier[0]);
11489 * The stride is either expressed as a multiple of 64 bytes chunks for
11490 * linear buffers or in number of tiles for tiled buffers.
11492 if (intel_rotation_90_or_270(rotation)) {
11493 /* stride = Surface height in tiles */
11494 tile_height = intel_tile_height(dev_priv, fb->modifier[0], 0);
11495 stride = DIV_ROUND_UP(fb->height, tile_height);
11497 stride = fb->pitches[0] /
11498 intel_fb_stride_alignment(dev_priv, fb->modifier[0],
11503 * Both PLANE_CTL and PLANE_STRIDE are not updated on vblank but on
11504 * PLANE_SURF updates, the update is then guaranteed to be atomic.
11506 I915_WRITE(PLANE_CTL(pipe, 0), ctl);
11507 I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
11509 I915_WRITE(PLANE_SURF(pipe, 0), work->gtt_offset);
11510 POSTING_READ(PLANE_SURF(pipe, 0));
11513 static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc,
11514 struct intel_flip_work *work)
11516 struct drm_device *dev = intel_crtc->base.dev;
11517 struct drm_i915_private *dev_priv = dev->dev_private;
11518 struct intel_framebuffer *intel_fb =
11519 to_intel_framebuffer(intel_crtc->base.primary->fb);
11520 struct drm_i915_gem_object *obj = intel_fb->obj;
11521 i915_reg_t reg = DSPCNTR(intel_crtc->plane);
11524 dspcntr = I915_READ(reg);
11526 if (obj->tiling_mode != I915_TILING_NONE)
11527 dspcntr |= DISPPLANE_TILED;
11529 dspcntr &= ~DISPPLANE_TILED;
11531 I915_WRITE(reg, dspcntr);
11533 I915_WRITE(DSPSURF(intel_crtc->plane), work->gtt_offset);
11534 POSTING_READ(DSPSURF(intel_crtc->plane));
11537 static void intel_mmio_flip_work_func(struct work_struct *w)
11539 struct intel_flip_work *work =
11540 container_of(w, struct intel_flip_work, mmio_work);
11541 struct intel_crtc *crtc = to_intel_crtc(work->crtc);
11542 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
11543 struct intel_framebuffer *intel_fb =
11544 to_intel_framebuffer(crtc->base.primary->fb);
11545 struct drm_i915_gem_object *obj = intel_fb->obj;
11547 if (work->flip_queued_req)
11548 WARN_ON(__i915_wait_request(work->flip_queued_req,
11550 &dev_priv->rps.mmioflips));
11552 /* For framebuffer backed by dmabuf, wait for fence */
11553 if (obj->base.dma_buf)
11554 WARN_ON(reservation_object_wait_timeout_rcu(obj->base.dma_buf->resv,
11556 MAX_SCHEDULE_TIMEOUT) < 0);
11558 intel_pipe_update_start(crtc);
11560 if (INTEL_GEN(dev_priv) >= 9)
11561 skl_do_mmio_flip(crtc, work->rotation, work);
11563 /* use_mmio_flip() retricts MMIO flips to ilk+ */
11564 ilk_do_mmio_flip(crtc, work);
11566 intel_pipe_update_end(crtc, work);
11569 static int intel_default_queue_flip(struct drm_device *dev,
11570 struct drm_crtc *crtc,
11571 struct drm_framebuffer *fb,
11572 struct drm_i915_gem_object *obj,
11573 struct drm_i915_gem_request *req,
11579 static bool __pageflip_stall_check_cs(struct drm_i915_private *dev_priv,
11580 struct intel_crtc *intel_crtc,
11581 struct intel_flip_work *work)
11585 if (!atomic_read(&work->pending))
11590 vblank = intel_crtc_get_vblank_counter(intel_crtc);
11591 if (work->flip_ready_vblank == 0) {
11592 if (work->flip_queued_req &&
11593 !i915_gem_request_completed(work->flip_queued_req, true))
11596 work->flip_ready_vblank = vblank;
11599 if (vblank - work->flip_ready_vblank < 3)
11602 /* Potential stall - if we see that the flip has happened,
11603 * assume a missed interrupt. */
11604 if (INTEL_GEN(dev_priv) >= 4)
11605 addr = I915_HI_DISPBASE(I915_READ(DSPSURF(intel_crtc->plane)));
11607 addr = I915_READ(DSPADDR(intel_crtc->plane));
11609 /* There is a potential issue here with a false positive after a flip
11610 * to the same address. We could address this by checking for a
11611 * non-incrementing frame counter.
11613 return addr == work->gtt_offset;
11616 void intel_check_page_flip(struct drm_i915_private *dev_priv, int pipe)
11618 struct drm_device *dev = dev_priv->dev;
11619 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
11620 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11621 struct intel_flip_work *work;
11623 WARN_ON(!in_interrupt());
11628 spin_lock(&dev->event_lock);
11629 work = intel_crtc->flip_work;
11631 if (work != NULL && !is_mmio_work(work) &&
11632 __pageflip_stall_check_cs(dev_priv, intel_crtc, work)) {
11634 "Kicking stuck page flip: queued at %d, now %d\n",
11635 work->flip_queued_vblank, intel_crtc_get_vblank_counter(intel_crtc));
11636 page_flip_completed(intel_crtc);
11640 if (work != NULL && !is_mmio_work(work) &&
11641 intel_crtc_get_vblank_counter(intel_crtc) - work->flip_queued_vblank > 1)
11642 intel_queue_rps_boost_for_request(work->flip_queued_req);
11643 spin_unlock(&dev->event_lock);
11646 static int intel_crtc_page_flip(struct drm_crtc *crtc,
11647 struct drm_framebuffer *fb,
11648 struct drm_pending_vblank_event *event,
11649 uint32_t page_flip_flags)
11651 struct drm_device *dev = crtc->dev;
11652 struct drm_i915_private *dev_priv = dev->dev_private;
11653 struct drm_framebuffer *old_fb = crtc->primary->fb;
11654 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
11655 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11656 struct drm_plane *primary = crtc->primary;
11657 enum pipe pipe = intel_crtc->pipe;
11658 struct intel_flip_work *work;
11659 struct intel_engine_cs *engine;
11661 struct drm_i915_gem_request *request = NULL;
11665 * drm_mode_page_flip_ioctl() should already catch this, but double
11666 * check to be safe. In the future we may enable pageflipping from
11667 * a disabled primary plane.
11669 if (WARN_ON(intel_fb_obj(old_fb) == NULL))
11672 /* Can't change pixel format via MI display flips. */
11673 if (fb->pixel_format != crtc->primary->fb->pixel_format)
11677 * TILEOFF/LINOFF registers can't be changed via MI display flips.
11678 * Note that pitch changes could also affect these register.
11680 if (INTEL_INFO(dev)->gen > 3 &&
11681 (fb->offsets[0] != crtc->primary->fb->offsets[0] ||
11682 fb->pitches[0] != crtc->primary->fb->pitches[0]))
11685 if (i915_terminally_wedged(&dev_priv->gpu_error))
11688 work = kzalloc(sizeof(*work), GFP_KERNEL);
11692 work->event = event;
11694 work->old_fb = old_fb;
11695 INIT_WORK(&work->unpin_work, intel_unpin_work_fn);
11697 ret = drm_crtc_vblank_get(crtc);
11701 /* We borrow the event spin lock for protecting flip_work */
11702 spin_lock_irq(&dev->event_lock);
11703 if (intel_crtc->flip_work) {
11704 /* Before declaring the flip queue wedged, check if
11705 * the hardware completed the operation behind our backs.
11707 if (pageflip_finished(intel_crtc, intel_crtc->flip_work)) {
11708 DRM_DEBUG_DRIVER("flip queue: previous flip completed, continuing\n");
11709 page_flip_completed(intel_crtc);
11711 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
11712 spin_unlock_irq(&dev->event_lock);
11714 drm_crtc_vblank_put(crtc);
11719 intel_crtc->flip_work = work;
11720 spin_unlock_irq(&dev->event_lock);
11722 if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
11723 flush_workqueue(dev_priv->wq);
11725 /* Reference the objects for the scheduled work. */
11726 drm_framebuffer_reference(work->old_fb);
11727 drm_gem_object_reference(&obj->base);
11729 crtc->primary->fb = fb;
11730 update_state_fb(crtc->primary);
11732 intel_fbc_pre_update(intel_crtc, intel_crtc->config,
11733 to_intel_plane_state(primary->state));
11735 work->pending_flip_obj = obj;
11737 ret = i915_mutex_lock_interruptible(dev);
11741 intel_crtc->reset_counter = i915_reset_counter(&dev_priv->gpu_error);
11742 if (__i915_reset_in_progress_or_wedged(intel_crtc->reset_counter)) {
11747 atomic_inc(&intel_crtc->unpin_work_count);
11749 if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
11750 work->flip_count = I915_READ(PIPE_FLIPCOUNT_G4X(pipe)) + 1;
11752 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
11753 engine = &dev_priv->engine[BCS];
11754 if (obj->tiling_mode != intel_fb_obj(work->old_fb)->tiling_mode)
11755 /* vlv: DISPLAY_FLIP fails to change tiling */
11757 } else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
11758 engine = &dev_priv->engine[BCS];
11759 } else if (INTEL_INFO(dev)->gen >= 7) {
11760 engine = i915_gem_request_get_engine(obj->last_write_req);
11761 if (engine == NULL || engine->id != RCS)
11762 engine = &dev_priv->engine[BCS];
11764 engine = &dev_priv->engine[RCS];
11767 mmio_flip = use_mmio_flip(engine, obj);
11769 /* When using CS flips, we want to emit semaphores between rings.
11770 * However, when using mmio flips we will create a task to do the
11771 * synchronisation, so all we want here is to pin the framebuffer
11772 * into the display plane and skip any waits.
11775 ret = i915_gem_object_sync(obj, engine, &request);
11776 if (!ret && !request) {
11777 request = i915_gem_request_alloc(engine, NULL);
11778 ret = PTR_ERR_OR_ZERO(request);
11782 goto cleanup_pending;
11785 ret = intel_pin_and_fence_fb_obj(fb, primary->state->rotation);
11787 goto cleanup_pending;
11789 work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary),
11791 work->gtt_offset += intel_crtc->dspaddr_offset;
11792 work->rotation = crtc->primary->state->rotation;
11795 INIT_WORK(&work->mmio_work, intel_mmio_flip_work_func);
11797 i915_gem_request_assign(&work->flip_queued_req,
11798 obj->last_write_req);
11800 schedule_work(&work->mmio_work);
11802 i915_gem_request_assign(&work->flip_queued_req, request);
11803 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, request,
11806 goto cleanup_unpin;
11808 intel_mark_page_flip_active(intel_crtc, work);
11810 i915_add_request_no_flush(request);
11813 i915_gem_track_fb(intel_fb_obj(old_fb), obj,
11814 to_intel_plane(primary)->frontbuffer_bit);
11815 mutex_unlock(&dev->struct_mutex);
11817 intel_frontbuffer_flip_prepare(dev,
11818 to_intel_plane(primary)->frontbuffer_bit);
11820 trace_i915_flip_request(intel_crtc->plane, obj);
11825 intel_unpin_fb_obj(fb, crtc->primary->state->rotation);
11827 if (!IS_ERR_OR_NULL(request))
11828 i915_add_request_no_flush(request);
11829 atomic_dec(&intel_crtc->unpin_work_count);
11830 mutex_unlock(&dev->struct_mutex);
11832 crtc->primary->fb = old_fb;
11833 update_state_fb(crtc->primary);
11835 drm_gem_object_unreference_unlocked(&obj->base);
11836 drm_framebuffer_unreference(work->old_fb);
11838 spin_lock_irq(&dev->event_lock);
11839 intel_crtc->flip_work = NULL;
11840 spin_unlock_irq(&dev->event_lock);
11842 drm_crtc_vblank_put(crtc);
11847 struct drm_atomic_state *state;
11848 struct drm_plane_state *plane_state;
11851 state = drm_atomic_state_alloc(dev);
11854 state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
11857 plane_state = drm_atomic_get_plane_state(state, primary);
11858 ret = PTR_ERR_OR_ZERO(plane_state);
11860 drm_atomic_set_fb_for_plane(plane_state, fb);
11862 ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
11864 ret = drm_atomic_commit(state);
11867 if (ret == -EDEADLK) {
11868 drm_modeset_backoff(state->acquire_ctx);
11869 drm_atomic_state_clear(state);
11874 drm_atomic_state_free(state);
11876 if (ret == 0 && event) {
11877 spin_lock_irq(&dev->event_lock);
11878 drm_crtc_send_vblank_event(crtc, event);
11879 spin_unlock_irq(&dev->event_lock);
11887 * intel_wm_need_update - Check whether watermarks need updating
11888 * @plane: drm plane
11889 * @state: new plane state
11891 * Check current plane state versus the new one to determine whether
11892 * watermarks need to be recalculated.
11894 * Returns true or false.
11896 static bool intel_wm_need_update(struct drm_plane *plane,
11897 struct drm_plane_state *state)
11899 struct intel_plane_state *new = to_intel_plane_state(state);
11900 struct intel_plane_state *cur = to_intel_plane_state(plane->state);
11902 /* Update watermarks on tiling or size changes. */
11903 if (new->visible != cur->visible)
11906 if (!cur->base.fb || !new->base.fb)
11909 if (cur->base.fb->modifier[0] != new->base.fb->modifier[0] ||
11910 cur->base.rotation != new->base.rotation ||
11911 drm_rect_width(&new->src) != drm_rect_width(&cur->src) ||
11912 drm_rect_height(&new->src) != drm_rect_height(&cur->src) ||
11913 drm_rect_width(&new->dst) != drm_rect_width(&cur->dst) ||
11914 drm_rect_height(&new->dst) != drm_rect_height(&cur->dst))
11920 static bool needs_scaling(struct intel_plane_state *state)
11922 int src_w = drm_rect_width(&state->src) >> 16;
11923 int src_h = drm_rect_height(&state->src) >> 16;
11924 int dst_w = drm_rect_width(&state->dst);
11925 int dst_h = drm_rect_height(&state->dst);
11927 return (src_w != dst_w || src_h != dst_h);
11930 int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
11931 struct drm_plane_state *plane_state)
11933 struct intel_crtc_state *pipe_config = to_intel_crtc_state(crtc_state);
11934 struct drm_crtc *crtc = crtc_state->crtc;
11935 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11936 struct drm_plane *plane = plane_state->plane;
11937 struct drm_device *dev = crtc->dev;
11938 struct drm_i915_private *dev_priv = to_i915(dev);
11939 struct intel_plane_state *old_plane_state =
11940 to_intel_plane_state(plane->state);
11941 bool mode_changed = needs_modeset(crtc_state);
11942 bool was_crtc_enabled = crtc->state->active;
11943 bool is_crtc_enabled = crtc_state->active;
11944 bool turn_off, turn_on, visible, was_visible;
11945 struct drm_framebuffer *fb = plane_state->fb;
11948 if (crtc_state && INTEL_INFO(dev)->gen >= 9 &&
11949 plane->type != DRM_PLANE_TYPE_CURSOR) {
11950 ret = skl_update_scaler_plane(
11951 to_intel_crtc_state(crtc_state),
11952 to_intel_plane_state(plane_state));
11957 was_visible = old_plane_state->visible;
11958 visible = to_intel_plane_state(plane_state)->visible;
11960 if (!was_crtc_enabled && WARN_ON(was_visible))
11961 was_visible = false;
11964 * Visibility is calculated as if the crtc was on, but
11965 * after scaler setup everything depends on it being off
11966 * when the crtc isn't active.
11968 * FIXME this is wrong for watermarks. Watermarks should also
11969 * be computed as if the pipe would be active. Perhaps move
11970 * per-plane wm computation to the .check_plane() hook, and
11971 * only combine the results from all planes in the current place?
11973 if (!is_crtc_enabled)
11974 to_intel_plane_state(plane_state)->visible = visible = false;
11976 if (!was_visible && !visible)
11979 if (fb != old_plane_state->base.fb)
11980 pipe_config->fb_changed = true;
11982 turn_off = was_visible && (!visible || mode_changed);
11983 turn_on = visible && (!was_visible || mode_changed);
11985 DRM_DEBUG_ATOMIC("[CRTC:%d:%s] has [PLANE:%d:%s] with fb %i\n",
11986 intel_crtc->base.base.id,
11987 intel_crtc->base.name,
11988 plane->base.id, plane->name,
11989 fb ? fb->base.id : -1);
11991 DRM_DEBUG_ATOMIC("[PLANE:%d:%s] visible %i -> %i, off %i, on %i, ms %i\n",
11992 plane->base.id, plane->name,
11993 was_visible, visible,
11994 turn_off, turn_on, mode_changed);
11997 pipe_config->update_wm_pre = true;
11999 /* must disable cxsr around plane enable/disable */
12000 if (plane->type != DRM_PLANE_TYPE_CURSOR)
12001 pipe_config->disable_cxsr = true;
12002 } else if (turn_off) {
12003 pipe_config->update_wm_post = true;
12005 /* must disable cxsr around plane enable/disable */
12006 if (plane->type != DRM_PLANE_TYPE_CURSOR)
12007 pipe_config->disable_cxsr = true;
12008 } else if (intel_wm_need_update(plane, plane_state)) {
12009 /* FIXME bollocks */
12010 pipe_config->update_wm_pre = true;
12011 pipe_config->update_wm_post = true;
12014 /* Pre-gen9 platforms need two-step watermark updates */
12015 if ((pipe_config->update_wm_pre || pipe_config->update_wm_post) &&
12016 INTEL_INFO(dev)->gen < 9 && dev_priv->display.optimize_watermarks)
12017 to_intel_crtc_state(crtc_state)->wm.need_postvbl_update = true;
12019 if (visible || was_visible)
12020 pipe_config->fb_bits |= to_intel_plane(plane)->frontbuffer_bit;
12023 * WaCxSRDisabledForSpriteScaling:ivb
12025 * cstate->update_wm was already set above, so this flag will
12026 * take effect when we commit and program watermarks.
12028 if (plane->type == DRM_PLANE_TYPE_OVERLAY && IS_IVYBRIDGE(dev) &&
12029 needs_scaling(to_intel_plane_state(plane_state)) &&
12030 !needs_scaling(old_plane_state))
12031 pipe_config->disable_lp_wm = true;
12036 static bool encoders_cloneable(const struct intel_encoder *a,
12037 const struct intel_encoder *b)
12039 /* masks could be asymmetric, so check both ways */
12040 return a == b || (a->cloneable & (1 << b->type) &&
12041 b->cloneable & (1 << a->type));
12044 static bool check_single_encoder_cloning(struct drm_atomic_state *state,
12045 struct intel_crtc *crtc,
12046 struct intel_encoder *encoder)
12048 struct intel_encoder *source_encoder;
12049 struct drm_connector *connector;
12050 struct drm_connector_state *connector_state;
12053 for_each_connector_in_state(state, connector, connector_state, i) {
12054 if (connector_state->crtc != &crtc->base)
12058 to_intel_encoder(connector_state->best_encoder);
12059 if (!encoders_cloneable(encoder, source_encoder))
12066 static bool check_encoder_cloning(struct drm_atomic_state *state,
12067 struct intel_crtc *crtc)
12069 struct intel_encoder *encoder;
12070 struct drm_connector *connector;
12071 struct drm_connector_state *connector_state;
12074 for_each_connector_in_state(state, connector, connector_state, i) {
12075 if (connector_state->crtc != &crtc->base)
12078 encoder = to_intel_encoder(connector_state->best_encoder);
12079 if (!check_single_encoder_cloning(state, crtc, encoder))
12086 static int intel_crtc_atomic_check(struct drm_crtc *crtc,
12087 struct drm_crtc_state *crtc_state)
12089 struct drm_device *dev = crtc->dev;
12090 struct drm_i915_private *dev_priv = dev->dev_private;
12091 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
12092 struct intel_crtc_state *pipe_config =
12093 to_intel_crtc_state(crtc_state);
12094 struct drm_atomic_state *state = crtc_state->state;
12096 bool mode_changed = needs_modeset(crtc_state);
12098 if (mode_changed && !check_encoder_cloning(state, intel_crtc)) {
12099 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
12103 if (mode_changed && !crtc_state->active)
12104 pipe_config->update_wm_post = true;
12106 if (mode_changed && crtc_state->enable &&
12107 dev_priv->display.crtc_compute_clock &&
12108 !WARN_ON(pipe_config->shared_dpll)) {
12109 ret = dev_priv->display.crtc_compute_clock(intel_crtc,
12115 if (crtc_state->color_mgmt_changed) {
12116 ret = intel_color_check(crtc, crtc_state);
12122 if (dev_priv->display.compute_pipe_wm) {
12123 ret = dev_priv->display.compute_pipe_wm(pipe_config);
12125 DRM_DEBUG_KMS("Target pipe watermarks are invalid\n");
12130 if (dev_priv->display.compute_intermediate_wm &&
12131 !to_intel_atomic_state(state)->skip_intermediate_wm) {
12132 if (WARN_ON(!dev_priv->display.compute_pipe_wm))
12136 * Calculate 'intermediate' watermarks that satisfy both the
12137 * old state and the new state. We can program these
12140 ret = dev_priv->display.compute_intermediate_wm(crtc->dev,
12144 DRM_DEBUG_KMS("No valid intermediate pipe watermarks are possible\n");
12147 } else if (dev_priv->display.compute_intermediate_wm) {
12148 if (HAS_PCH_SPLIT(dev_priv) && INTEL_GEN(dev_priv) < 9)
12149 pipe_config->wm.ilk.intermediate = pipe_config->wm.ilk.optimal;
12152 if (INTEL_INFO(dev)->gen >= 9) {
12154 ret = skl_update_scaler_crtc(pipe_config);
12157 ret = intel_atomic_setup_scalers(dev, intel_crtc,
12164 static const struct drm_crtc_helper_funcs intel_helper_funcs = {
12165 .mode_set_base_atomic = intel_pipe_set_base_atomic,
12166 .atomic_begin = intel_begin_crtc_commit,
12167 .atomic_flush = intel_finish_crtc_commit,
12168 .atomic_check = intel_crtc_atomic_check,
12171 static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
12173 struct intel_connector *connector;
12175 for_each_intel_connector(dev, connector) {
12176 if (connector->base.state->crtc)
12177 drm_connector_unreference(&connector->base);
12179 if (connector->base.encoder) {
12180 connector->base.state->best_encoder =
12181 connector->base.encoder;
12182 connector->base.state->crtc =
12183 connector->base.encoder->crtc;
12185 drm_connector_reference(&connector->base);
12187 connector->base.state->best_encoder = NULL;
12188 connector->base.state->crtc = NULL;
12194 connected_sink_compute_bpp(struct intel_connector *connector,
12195 struct intel_crtc_state *pipe_config)
12197 int bpp = pipe_config->pipe_bpp;
12199 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
12200 connector->base.base.id,
12201 connector->base.name);
12203 /* Don't use an invalid EDID bpc value */
12204 if (connector->base.display_info.bpc &&
12205 connector->base.display_info.bpc * 3 < bpp) {
12206 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
12207 bpp, connector->base.display_info.bpc*3);
12208 pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
12211 /* Clamp bpp to default limit on screens without EDID 1.4 */
12212 if (connector->base.display_info.bpc == 0) {
12213 int type = connector->base.connector_type;
12214 int clamp_bpp = 24;
12216 /* Fall back to 18 bpp when DP sink capability is unknown. */
12217 if (type == DRM_MODE_CONNECTOR_DisplayPort ||
12218 type == DRM_MODE_CONNECTOR_eDP)
12221 if (bpp > clamp_bpp) {
12222 DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of %d\n",
12224 pipe_config->pipe_bpp = clamp_bpp;
12230 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
12231 struct intel_crtc_state *pipe_config)
12233 struct drm_device *dev = crtc->base.dev;
12234 struct drm_atomic_state *state;
12235 struct drm_connector *connector;
12236 struct drm_connector_state *connector_state;
12239 if ((IS_G4X(dev) || IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)))
12241 else if (INTEL_INFO(dev)->gen >= 5)
12247 pipe_config->pipe_bpp = bpp;
12249 state = pipe_config->base.state;
12251 /* Clamp display bpp to EDID value */
12252 for_each_connector_in_state(state, connector, connector_state, i) {
12253 if (connector_state->crtc != &crtc->base)
12256 connected_sink_compute_bpp(to_intel_connector(connector),
12263 static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
12265 DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
12266 "type: 0x%x flags: 0x%x\n",
12268 mode->crtc_hdisplay, mode->crtc_hsync_start,
12269 mode->crtc_hsync_end, mode->crtc_htotal,
12270 mode->crtc_vdisplay, mode->crtc_vsync_start,
12271 mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags);
12274 static void intel_dump_pipe_config(struct intel_crtc *crtc,
12275 struct intel_crtc_state *pipe_config,
12276 const char *context)
12278 struct drm_device *dev = crtc->base.dev;
12279 struct drm_plane *plane;
12280 struct intel_plane *intel_plane;
12281 struct intel_plane_state *state;
12282 struct drm_framebuffer *fb;
12284 DRM_DEBUG_KMS("[CRTC:%d:%s]%s config %p for pipe %c\n",
12285 crtc->base.base.id, crtc->base.name,
12286 context, pipe_config, pipe_name(crtc->pipe));
12288 DRM_DEBUG_KMS("cpu_transcoder: %s\n", transcoder_name(pipe_config->cpu_transcoder));
12289 DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
12290 pipe_config->pipe_bpp, pipe_config->dither);
12291 DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
12292 pipe_config->has_pch_encoder,
12293 pipe_config->fdi_lanes,
12294 pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
12295 pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
12296 pipe_config->fdi_m_n.tu);
12297 DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
12298 pipe_config->has_dp_encoder,
12299 pipe_config->lane_count,
12300 pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
12301 pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
12302 pipe_config->dp_m_n.tu);
12304 DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
12305 pipe_config->has_dp_encoder,
12306 pipe_config->lane_count,
12307 pipe_config->dp_m2_n2.gmch_m,
12308 pipe_config->dp_m2_n2.gmch_n,
12309 pipe_config->dp_m2_n2.link_m,
12310 pipe_config->dp_m2_n2.link_n,
12311 pipe_config->dp_m2_n2.tu);
12313 DRM_DEBUG_KMS("audio: %i, infoframes: %i\n",
12314 pipe_config->has_audio,
12315 pipe_config->has_infoframe);
12317 DRM_DEBUG_KMS("requested mode:\n");
12318 drm_mode_debug_printmodeline(&pipe_config->base.mode);
12319 DRM_DEBUG_KMS("adjusted mode:\n");
12320 drm_mode_debug_printmodeline(&pipe_config->base.adjusted_mode);
12321 intel_dump_crtc_timings(&pipe_config->base.adjusted_mode);
12322 DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
12323 DRM_DEBUG_KMS("pipe src size: %dx%d\n",
12324 pipe_config->pipe_src_w, pipe_config->pipe_src_h);
12325 DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
12327 pipe_config->scaler_state.scaler_users,
12328 pipe_config->scaler_state.scaler_id);
12329 DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
12330 pipe_config->gmch_pfit.control,
12331 pipe_config->gmch_pfit.pgm_ratios,
12332 pipe_config->gmch_pfit.lvds_border_bits);
12333 DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
12334 pipe_config->pch_pfit.pos,
12335 pipe_config->pch_pfit.size,
12336 pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
12337 DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
12338 DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
12340 if (IS_BROXTON(dev)) {
12341 DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x,"
12342 "pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, "
12343 "pll6: 0x%x, pll8: 0x%x, pll9: 0x%x, pll10: 0x%x, pcsdw12: 0x%x\n",
12344 pipe_config->ddi_pll_sel,
12345 pipe_config->dpll_hw_state.ebb0,
12346 pipe_config->dpll_hw_state.ebb4,
12347 pipe_config->dpll_hw_state.pll0,
12348 pipe_config->dpll_hw_state.pll1,
12349 pipe_config->dpll_hw_state.pll2,
12350 pipe_config->dpll_hw_state.pll3,
12351 pipe_config->dpll_hw_state.pll6,
12352 pipe_config->dpll_hw_state.pll8,
12353 pipe_config->dpll_hw_state.pll9,
12354 pipe_config->dpll_hw_state.pll10,
12355 pipe_config->dpll_hw_state.pcsdw12);
12356 } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
12357 DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: "
12358 "ctrl1: 0x%x, cfgcr1: 0x%x, cfgcr2: 0x%x\n",
12359 pipe_config->ddi_pll_sel,
12360 pipe_config->dpll_hw_state.ctrl1,
12361 pipe_config->dpll_hw_state.cfgcr1,
12362 pipe_config->dpll_hw_state.cfgcr2);
12363 } else if (HAS_DDI(dev)) {
12364 DRM_DEBUG_KMS("ddi_pll_sel: 0x%x; dpll_hw_state: wrpll: 0x%x spll: 0x%x\n",
12365 pipe_config->ddi_pll_sel,
12366 pipe_config->dpll_hw_state.wrpll,
12367 pipe_config->dpll_hw_state.spll);
12369 DRM_DEBUG_KMS("dpll_hw_state: dpll: 0x%x, dpll_md: 0x%x, "
12370 "fp0: 0x%x, fp1: 0x%x\n",
12371 pipe_config->dpll_hw_state.dpll,
12372 pipe_config->dpll_hw_state.dpll_md,
12373 pipe_config->dpll_hw_state.fp0,
12374 pipe_config->dpll_hw_state.fp1);
12377 DRM_DEBUG_KMS("planes on this crtc\n");
12378 list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
12379 intel_plane = to_intel_plane(plane);
12380 if (intel_plane->pipe != crtc->pipe)
12383 state = to_intel_plane_state(plane->state);
12384 fb = state->base.fb;
12386 DRM_DEBUG_KMS("[PLANE:%d:%s] disabled, scaler_id = %d\n",
12387 plane->base.id, plane->name, state->scaler_id);
12391 DRM_DEBUG_KMS("[PLANE:%d:%s] enabled",
12392 plane->base.id, plane->name);
12393 DRM_DEBUG_KMS("\tFB:%d, fb = %ux%u format = %s",
12394 fb->base.id, fb->width, fb->height,
12395 drm_get_format_name(fb->pixel_format));
12396 DRM_DEBUG_KMS("\tscaler:%d src %dx%d+%d+%d dst %dx%d+%d+%d\n",
12398 state->src.x1 >> 16, state->src.y1 >> 16,
12399 drm_rect_width(&state->src) >> 16,
12400 drm_rect_height(&state->src) >> 16,
12401 state->dst.x1, state->dst.y1,
12402 drm_rect_width(&state->dst),
12403 drm_rect_height(&state->dst));
12407 static bool check_digital_port_conflicts(struct drm_atomic_state *state)
12409 struct drm_device *dev = state->dev;
12410 struct drm_connector *connector;
12411 unsigned int used_ports = 0;
12414 * Walk the connector list instead of the encoder
12415 * list to detect the problem on ddi platforms
12416 * where there's just one encoder per digital port.
12418 drm_for_each_connector(connector, dev) {
12419 struct drm_connector_state *connector_state;
12420 struct intel_encoder *encoder;
12422 connector_state = drm_atomic_get_existing_connector_state(state, connector);
12423 if (!connector_state)
12424 connector_state = connector->state;
12426 if (!connector_state->best_encoder)
12429 encoder = to_intel_encoder(connector_state->best_encoder);
12431 WARN_ON(!connector_state->crtc);
12433 switch (encoder->type) {
12434 unsigned int port_mask;
12435 case INTEL_OUTPUT_UNKNOWN:
12436 if (WARN_ON(!HAS_DDI(dev)))
12438 case INTEL_OUTPUT_DISPLAYPORT:
12439 case INTEL_OUTPUT_HDMI:
12440 case INTEL_OUTPUT_EDP:
12441 port_mask = 1 << enc_to_dig_port(&encoder->base)->port;
12443 /* the same port mustn't appear more than once */
12444 if (used_ports & port_mask)
12447 used_ports |= port_mask;
12457 clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
12459 struct drm_crtc_state tmp_state;
12460 struct intel_crtc_scaler_state scaler_state;
12461 struct intel_dpll_hw_state dpll_hw_state;
12462 struct intel_shared_dpll *shared_dpll;
12463 uint32_t ddi_pll_sel;
12466 /* FIXME: before the switch to atomic started, a new pipe_config was
12467 * kzalloc'd. Code that depends on any field being zero should be
12468 * fixed, so that the crtc_state can be safely duplicated. For now,
12469 * only fields that are know to not cause problems are preserved. */
12471 tmp_state = crtc_state->base;
12472 scaler_state = crtc_state->scaler_state;
12473 shared_dpll = crtc_state->shared_dpll;
12474 dpll_hw_state = crtc_state->dpll_hw_state;
12475 ddi_pll_sel = crtc_state->ddi_pll_sel;
12476 force_thru = crtc_state->pch_pfit.force_thru;
12478 memset(crtc_state, 0, sizeof *crtc_state);
12480 crtc_state->base = tmp_state;
12481 crtc_state->scaler_state = scaler_state;
12482 crtc_state->shared_dpll = shared_dpll;
12483 crtc_state->dpll_hw_state = dpll_hw_state;
12484 crtc_state->ddi_pll_sel = ddi_pll_sel;
12485 crtc_state->pch_pfit.force_thru = force_thru;
12489 intel_modeset_pipe_config(struct drm_crtc *crtc,
12490 struct intel_crtc_state *pipe_config)
12492 struct drm_atomic_state *state = pipe_config->base.state;
12493 struct intel_encoder *encoder;
12494 struct drm_connector *connector;
12495 struct drm_connector_state *connector_state;
12496 int base_bpp, ret = -EINVAL;
12500 clear_intel_crtc_state(pipe_config);
12502 pipe_config->cpu_transcoder =
12503 (enum transcoder) to_intel_crtc(crtc)->pipe;
12506 * Sanitize sync polarity flags based on requested ones. If neither
12507 * positive or negative polarity is requested, treat this as meaning
12508 * negative polarity.
12510 if (!(pipe_config->base.adjusted_mode.flags &
12511 (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
12512 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
12514 if (!(pipe_config->base.adjusted_mode.flags &
12515 (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
12516 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
12518 base_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
12524 * Determine the real pipe dimensions. Note that stereo modes can
12525 * increase the actual pipe size due to the frame doubling and
12526 * insertion of additional space for blanks between the frame. This
12527 * is stored in the crtc timings. We use the requested mode to do this
12528 * computation to clearly distinguish it from the adjusted mode, which
12529 * can be changed by the connectors in the below retry loop.
12531 drm_crtc_get_hv_timing(&pipe_config->base.mode,
12532 &pipe_config->pipe_src_w,
12533 &pipe_config->pipe_src_h);
12536 /* Ensure the port clock defaults are reset when retrying. */
12537 pipe_config->port_clock = 0;
12538 pipe_config->pixel_multiplier = 1;
12540 /* Fill in default crtc timings, allow encoders to overwrite them. */
12541 drm_mode_set_crtcinfo(&pipe_config->base.adjusted_mode,
12542 CRTC_STEREO_DOUBLE);
12544 /* Pass our mode to the connectors and the CRTC to give them a chance to
12545 * adjust it according to limitations or connector properties, and also
12546 * a chance to reject the mode entirely.
12548 for_each_connector_in_state(state, connector, connector_state, i) {
12549 if (connector_state->crtc != crtc)
12552 encoder = to_intel_encoder(connector_state->best_encoder);
12554 if (!(encoder->compute_config(encoder, pipe_config))) {
12555 DRM_DEBUG_KMS("Encoder config failure\n");
12560 /* Set default port clock if not overwritten by the encoder. Needs to be
12561 * done afterwards in case the encoder adjusts the mode. */
12562 if (!pipe_config->port_clock)
12563 pipe_config->port_clock = pipe_config->base.adjusted_mode.crtc_clock
12564 * pipe_config->pixel_multiplier;
12566 ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
12568 DRM_DEBUG_KMS("CRTC fixup failed\n");
12572 if (ret == RETRY) {
12573 if (WARN(!retry, "loop in pipe configuration computation\n")) {
12578 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
12580 goto encoder_retry;
12583 /* Dithering seems to not pass-through bits correctly when it should, so
12584 * only enable it on 6bpc panels. */
12585 pipe_config->dither = pipe_config->pipe_bpp == 6*3;
12586 DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
12587 base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
12594 intel_modeset_update_crtc_state(struct drm_atomic_state *state)
12596 struct drm_crtc *crtc;
12597 struct drm_crtc_state *crtc_state;
12600 /* Double check state. */
12601 for_each_crtc_in_state(state, crtc, crtc_state, i) {
12602 to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
12604 /* Update hwmode for vblank functions */
12605 if (crtc->state->active)
12606 crtc->hwmode = crtc->state->adjusted_mode;
12608 crtc->hwmode.crtc_clock = 0;
12611 * Update legacy state to satisfy fbc code. This can
12612 * be removed when fbc uses the atomic state.
12614 if (drm_atomic_get_existing_plane_state(state, crtc->primary)) {
12615 struct drm_plane_state *plane_state = crtc->primary->state;
12617 crtc->primary->fb = plane_state->fb;
12618 crtc->x = plane_state->src_x >> 16;
12619 crtc->y = plane_state->src_y >> 16;
12624 static bool intel_fuzzy_clock_check(int clock1, int clock2)
12628 if (clock1 == clock2)
12631 if (!clock1 || !clock2)
12634 diff = abs(clock1 - clock2);
12636 if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
12642 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
12643 list_for_each_entry((intel_crtc), \
12644 &(dev)->mode_config.crtc_list, \
12646 for_each_if (mask & (1 <<(intel_crtc)->pipe))
12649 intel_compare_m_n(unsigned int m, unsigned int n,
12650 unsigned int m2, unsigned int n2,
12653 if (m == m2 && n == n2)
12656 if (exact || !m || !n || !m2 || !n2)
12659 BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);
12666 } else if (n < n2) {
12676 return intel_fuzzy_clock_check(m, m2);
12680 intel_compare_link_m_n(const struct intel_link_m_n *m_n,
12681 struct intel_link_m_n *m2_n2,
12684 if (m_n->tu == m2_n2->tu &&
12685 intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
12686 m2_n2->gmch_m, m2_n2->gmch_n, !adjust) &&
12687 intel_compare_m_n(m_n->link_m, m_n->link_n,
12688 m2_n2->link_m, m2_n2->link_n, !adjust)) {
12699 intel_pipe_config_compare(struct drm_device *dev,
12700 struct intel_crtc_state *current_config,
12701 struct intel_crtc_state *pipe_config,
12706 #define INTEL_ERR_OR_DBG_KMS(fmt, ...) \
12709 DRM_ERROR(fmt, ##__VA_ARGS__); \
12711 DRM_DEBUG_KMS(fmt, ##__VA_ARGS__); \
12714 #define PIPE_CONF_CHECK_X(name) \
12715 if (current_config->name != pipe_config->name) { \
12716 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12717 "(expected 0x%08x, found 0x%08x)\n", \
12718 current_config->name, \
12719 pipe_config->name); \
12723 #define PIPE_CONF_CHECK_I(name) \
12724 if (current_config->name != pipe_config->name) { \
12725 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12726 "(expected %i, found %i)\n", \
12727 current_config->name, \
12728 pipe_config->name); \
12732 #define PIPE_CONF_CHECK_P(name) \
12733 if (current_config->name != pipe_config->name) { \
12734 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12735 "(expected %p, found %p)\n", \
12736 current_config->name, \
12737 pipe_config->name); \
12741 #define PIPE_CONF_CHECK_M_N(name) \
12742 if (!intel_compare_link_m_n(¤t_config->name, \
12743 &pipe_config->name,\
12745 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12746 "(expected tu %i gmch %i/%i link %i/%i, " \
12747 "found tu %i, gmch %i/%i link %i/%i)\n", \
12748 current_config->name.tu, \
12749 current_config->name.gmch_m, \
12750 current_config->name.gmch_n, \
12751 current_config->name.link_m, \
12752 current_config->name.link_n, \
12753 pipe_config->name.tu, \
12754 pipe_config->name.gmch_m, \
12755 pipe_config->name.gmch_n, \
12756 pipe_config->name.link_m, \
12757 pipe_config->name.link_n); \
12761 /* This is required for BDW+ where there is only one set of registers for
12762 * switching between high and low RR.
12763 * This macro can be used whenever a comparison has to be made between one
12764 * hw state and multiple sw state variables.
12766 #define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \
12767 if (!intel_compare_link_m_n(¤t_config->name, \
12768 &pipe_config->name, adjust) && \
12769 !intel_compare_link_m_n(¤t_config->alt_name, \
12770 &pipe_config->name, adjust)) { \
12771 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12772 "(expected tu %i gmch %i/%i link %i/%i, " \
12773 "or tu %i gmch %i/%i link %i/%i, " \
12774 "found tu %i, gmch %i/%i link %i/%i)\n", \
12775 current_config->name.tu, \
12776 current_config->name.gmch_m, \
12777 current_config->name.gmch_n, \
12778 current_config->name.link_m, \
12779 current_config->name.link_n, \
12780 current_config->alt_name.tu, \
12781 current_config->alt_name.gmch_m, \
12782 current_config->alt_name.gmch_n, \
12783 current_config->alt_name.link_m, \
12784 current_config->alt_name.link_n, \
12785 pipe_config->name.tu, \
12786 pipe_config->name.gmch_m, \
12787 pipe_config->name.gmch_n, \
12788 pipe_config->name.link_m, \
12789 pipe_config->name.link_n); \
12793 #define PIPE_CONF_CHECK_FLAGS(name, mask) \
12794 if ((current_config->name ^ pipe_config->name) & (mask)) { \
12795 INTEL_ERR_OR_DBG_KMS("mismatch in " #name "(" #mask ") " \
12796 "(expected %i, found %i)\n", \
12797 current_config->name & (mask), \
12798 pipe_config->name & (mask)); \
12802 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
12803 if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
12804 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12805 "(expected %i, found %i)\n", \
12806 current_config->name, \
12807 pipe_config->name); \
12811 #define PIPE_CONF_QUIRK(quirk) \
12812 ((current_config->quirks | pipe_config->quirks) & (quirk))
12814 PIPE_CONF_CHECK_I(cpu_transcoder);
12816 PIPE_CONF_CHECK_I(has_pch_encoder);
12817 PIPE_CONF_CHECK_I(fdi_lanes);
12818 PIPE_CONF_CHECK_M_N(fdi_m_n);
12820 PIPE_CONF_CHECK_I(has_dp_encoder);
12821 PIPE_CONF_CHECK_I(lane_count);
12822 PIPE_CONF_CHECK_X(lane_lat_optim_mask);
12824 if (INTEL_INFO(dev)->gen < 8) {
12825 PIPE_CONF_CHECK_M_N(dp_m_n);
12827 if (current_config->has_drrs)
12828 PIPE_CONF_CHECK_M_N(dp_m2_n2);
12830 PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
12832 PIPE_CONF_CHECK_I(has_dsi_encoder);
12834 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
12835 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
12836 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_start);
12837 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_end);
12838 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_start);
12839 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_end);
12841 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vdisplay);
12842 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vtotal);
12843 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_start);
12844 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_end);
12845 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_start);
12846 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_end);
12848 PIPE_CONF_CHECK_I(pixel_multiplier);
12849 PIPE_CONF_CHECK_I(has_hdmi_sink);
12850 if ((INTEL_INFO(dev)->gen < 8 && !IS_HASWELL(dev)) ||
12851 IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
12852 PIPE_CONF_CHECK_I(limited_color_range);
12853 PIPE_CONF_CHECK_I(has_infoframe);
12855 PIPE_CONF_CHECK_I(has_audio);
12857 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12858 DRM_MODE_FLAG_INTERLACE);
12860 if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
12861 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12862 DRM_MODE_FLAG_PHSYNC);
12863 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12864 DRM_MODE_FLAG_NHSYNC);
12865 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12866 DRM_MODE_FLAG_PVSYNC);
12867 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12868 DRM_MODE_FLAG_NVSYNC);
12871 PIPE_CONF_CHECK_X(gmch_pfit.control);
12872 /* pfit ratios are autocomputed by the hw on gen4+ */
12873 if (INTEL_INFO(dev)->gen < 4)
12874 PIPE_CONF_CHECK_X(gmch_pfit.pgm_ratios);
12875 PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);
12878 PIPE_CONF_CHECK_I(pipe_src_w);
12879 PIPE_CONF_CHECK_I(pipe_src_h);
12881 PIPE_CONF_CHECK_I(pch_pfit.enabled);
12882 if (current_config->pch_pfit.enabled) {
12883 PIPE_CONF_CHECK_X(pch_pfit.pos);
12884 PIPE_CONF_CHECK_X(pch_pfit.size);
12887 PIPE_CONF_CHECK_I(scaler_state.scaler_id);
12890 /* BDW+ don't expose a synchronous way to read the state */
12891 if (IS_HASWELL(dev))
12892 PIPE_CONF_CHECK_I(ips_enabled);
12894 PIPE_CONF_CHECK_I(double_wide);
12896 PIPE_CONF_CHECK_X(ddi_pll_sel);
12898 PIPE_CONF_CHECK_P(shared_dpll);
12899 PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
12900 PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
12901 PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
12902 PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
12903 PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
12904 PIPE_CONF_CHECK_X(dpll_hw_state.spll);
12905 PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1);
12906 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1);
12907 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2);
12909 PIPE_CONF_CHECK_X(dsi_pll.ctrl);
12910 PIPE_CONF_CHECK_X(dsi_pll.div);
12912 if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
12913 PIPE_CONF_CHECK_I(pipe_bpp);
12915 PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.crtc_clock);
12916 PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
12918 #undef PIPE_CONF_CHECK_X
12919 #undef PIPE_CONF_CHECK_I
12920 #undef PIPE_CONF_CHECK_P
12921 #undef PIPE_CONF_CHECK_FLAGS
12922 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
12923 #undef PIPE_CONF_QUIRK
12924 #undef INTEL_ERR_OR_DBG_KMS
12929 static void intel_pipe_config_sanity_check(struct drm_i915_private *dev_priv,
12930 const struct intel_crtc_state *pipe_config)
12932 if (pipe_config->has_pch_encoder) {
12933 int fdi_dotclock = intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
12934 &pipe_config->fdi_m_n);
12935 int dotclock = pipe_config->base.adjusted_mode.crtc_clock;
12938 * FDI already provided one idea for the dotclock.
12939 * Yell if the encoder disagrees.
12941 WARN(!intel_fuzzy_clock_check(fdi_dotclock, dotclock),
12942 "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
12943 fdi_dotclock, dotclock);
12947 static void verify_wm_state(struct drm_crtc *crtc,
12948 struct drm_crtc_state *new_state)
12950 struct drm_device *dev = crtc->dev;
12951 struct drm_i915_private *dev_priv = dev->dev_private;
12952 struct skl_ddb_allocation hw_ddb, *sw_ddb;
12953 struct skl_ddb_entry *hw_entry, *sw_entry;
12954 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
12955 const enum pipe pipe = intel_crtc->pipe;
12958 if (INTEL_INFO(dev)->gen < 9 || !new_state->active)
12961 skl_ddb_get_hw_state(dev_priv, &hw_ddb);
12962 sw_ddb = &dev_priv->wm.skl_hw.ddb;
12965 for_each_plane(dev_priv, pipe, plane) {
12966 hw_entry = &hw_ddb.plane[pipe][plane];
12967 sw_entry = &sw_ddb->plane[pipe][plane];
12969 if (skl_ddb_entry_equal(hw_entry, sw_entry))
12972 DRM_ERROR("mismatch in DDB state pipe %c plane %d "
12973 "(expected (%u,%u), found (%u,%u))\n",
12974 pipe_name(pipe), plane + 1,
12975 sw_entry->start, sw_entry->end,
12976 hw_entry->start, hw_entry->end);
12980 hw_entry = &hw_ddb.plane[pipe][PLANE_CURSOR];
12981 sw_entry = &sw_ddb->plane[pipe][PLANE_CURSOR];
12983 if (!skl_ddb_entry_equal(hw_entry, sw_entry)) {
12984 DRM_ERROR("mismatch in DDB state pipe %c cursor "
12985 "(expected (%u,%u), found (%u,%u))\n",
12987 sw_entry->start, sw_entry->end,
12988 hw_entry->start, hw_entry->end);
12993 verify_connector_state(struct drm_device *dev, struct drm_crtc *crtc)
12995 struct drm_connector *connector;
12997 drm_for_each_connector(connector, dev) {
12998 struct drm_encoder *encoder = connector->encoder;
12999 struct drm_connector_state *state = connector->state;
13001 if (state->crtc != crtc)
13004 intel_connector_verify_state(to_intel_connector(connector));
13006 I915_STATE_WARN(state->best_encoder != encoder,
13007 "connector's atomic encoder doesn't match legacy encoder\n");
13012 verify_encoder_state(struct drm_device *dev)
13014 struct intel_encoder *encoder;
13015 struct intel_connector *connector;
13017 for_each_intel_encoder(dev, encoder) {
13018 bool enabled = false;
13021 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
13022 encoder->base.base.id,
13023 encoder->base.name);
13025 for_each_intel_connector(dev, connector) {
13026 if (connector->base.state->best_encoder != &encoder->base)
13030 I915_STATE_WARN(connector->base.state->crtc !=
13031 encoder->base.crtc,
13032 "connector's crtc doesn't match encoder crtc\n");
13035 I915_STATE_WARN(!!encoder->base.crtc != enabled,
13036 "encoder's enabled state mismatch "
13037 "(expected %i, found %i)\n",
13038 !!encoder->base.crtc, enabled);
13040 if (!encoder->base.crtc) {
13043 active = encoder->get_hw_state(encoder, &pipe);
13044 I915_STATE_WARN(active,
13045 "encoder detached but still enabled on pipe %c.\n",
13052 verify_crtc_state(struct drm_crtc *crtc,
13053 struct drm_crtc_state *old_crtc_state,
13054 struct drm_crtc_state *new_crtc_state)
13056 struct drm_device *dev = crtc->dev;
13057 struct drm_i915_private *dev_priv = dev->dev_private;
13058 struct intel_encoder *encoder;
13059 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13060 struct intel_crtc_state *pipe_config, *sw_config;
13061 struct drm_atomic_state *old_state;
13064 old_state = old_crtc_state->state;
13065 __drm_atomic_helper_crtc_destroy_state(old_crtc_state);
13066 pipe_config = to_intel_crtc_state(old_crtc_state);
13067 memset(pipe_config, 0, sizeof(*pipe_config));
13068 pipe_config->base.crtc = crtc;
13069 pipe_config->base.state = old_state;
13071 DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
13073 active = dev_priv->display.get_pipe_config(intel_crtc, pipe_config);
13075 /* hw state is inconsistent with the pipe quirk */
13076 if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
13077 (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
13078 active = new_crtc_state->active;
13080 I915_STATE_WARN(new_crtc_state->active != active,
13081 "crtc active state doesn't match with hw state "
13082 "(expected %i, found %i)\n", new_crtc_state->active, active);
13084 I915_STATE_WARN(intel_crtc->active != new_crtc_state->active,
13085 "transitional active state does not match atomic hw state "
13086 "(expected %i, found %i)\n", new_crtc_state->active, intel_crtc->active);
13088 for_each_encoder_on_crtc(dev, crtc, encoder) {
13091 active = encoder->get_hw_state(encoder, &pipe);
13092 I915_STATE_WARN(active != new_crtc_state->active,
13093 "[ENCODER:%i] active %i with crtc active %i\n",
13094 encoder->base.base.id, active, new_crtc_state->active);
13096 I915_STATE_WARN(active && intel_crtc->pipe != pipe,
13097 "Encoder connected to wrong pipe %c\n",
13101 encoder->get_config(encoder, pipe_config);
13104 if (!new_crtc_state->active)
13107 intel_pipe_config_sanity_check(dev_priv, pipe_config);
13109 sw_config = to_intel_crtc_state(crtc->state);
13110 if (!intel_pipe_config_compare(dev, sw_config,
13111 pipe_config, false)) {
13112 I915_STATE_WARN(1, "pipe state doesn't match!\n");
13113 intel_dump_pipe_config(intel_crtc, pipe_config,
13115 intel_dump_pipe_config(intel_crtc, sw_config,
13121 verify_single_dpll_state(struct drm_i915_private *dev_priv,
13122 struct intel_shared_dpll *pll,
13123 struct drm_crtc *crtc,
13124 struct drm_crtc_state *new_state)
13126 struct intel_dpll_hw_state dpll_hw_state;
13127 unsigned crtc_mask;
13130 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
13132 DRM_DEBUG_KMS("%s\n", pll->name);
13134 active = pll->funcs.get_hw_state(dev_priv, pll, &dpll_hw_state);
13136 if (!(pll->flags & INTEL_DPLL_ALWAYS_ON)) {
13137 I915_STATE_WARN(!pll->on && pll->active_mask,
13138 "pll in active use but not on in sw tracking\n");
13139 I915_STATE_WARN(pll->on && !pll->active_mask,
13140 "pll is on but not used by any active crtc\n");
13141 I915_STATE_WARN(pll->on != active,
13142 "pll on state mismatch (expected %i, found %i)\n",
13147 I915_STATE_WARN(pll->active_mask & ~pll->config.crtc_mask,
13148 "more active pll users than references: %x vs %x\n",
13149 pll->active_mask, pll->config.crtc_mask);
13154 crtc_mask = 1 << drm_crtc_index(crtc);
13156 if (new_state->active)
13157 I915_STATE_WARN(!(pll->active_mask & crtc_mask),
13158 "pll active mismatch (expected pipe %c in active mask 0x%02x)\n",
13159 pipe_name(drm_crtc_index(crtc)), pll->active_mask);
13161 I915_STATE_WARN(pll->active_mask & crtc_mask,
13162 "pll active mismatch (didn't expect pipe %c in active mask 0x%02x)\n",
13163 pipe_name(drm_crtc_index(crtc)), pll->active_mask);
13165 I915_STATE_WARN(!(pll->config.crtc_mask & crtc_mask),
13166 "pll enabled crtcs mismatch (expected 0x%x in 0x%02x)\n",
13167 crtc_mask, pll->config.crtc_mask);
13169 I915_STATE_WARN(pll->on && memcmp(&pll->config.hw_state,
13171 sizeof(dpll_hw_state)),
13172 "pll hw state mismatch\n");
13176 verify_shared_dpll_state(struct drm_device *dev, struct drm_crtc *crtc,
13177 struct drm_crtc_state *old_crtc_state,
13178 struct drm_crtc_state *new_crtc_state)
13180 struct drm_i915_private *dev_priv = dev->dev_private;
13181 struct intel_crtc_state *old_state = to_intel_crtc_state(old_crtc_state);
13182 struct intel_crtc_state *new_state = to_intel_crtc_state(new_crtc_state);
13184 if (new_state->shared_dpll)
13185 verify_single_dpll_state(dev_priv, new_state->shared_dpll, crtc, new_crtc_state);
13187 if (old_state->shared_dpll &&
13188 old_state->shared_dpll != new_state->shared_dpll) {
13189 unsigned crtc_mask = 1 << drm_crtc_index(crtc);
13190 struct intel_shared_dpll *pll = old_state->shared_dpll;
13192 I915_STATE_WARN(pll->active_mask & crtc_mask,
13193 "pll active mismatch (didn't expect pipe %c in active mask)\n",
13194 pipe_name(drm_crtc_index(crtc)));
13195 I915_STATE_WARN(pll->config.crtc_mask & crtc_mask,
13196 "pll enabled crtcs mismatch (found %x in enabled mask)\n",
13197 pipe_name(drm_crtc_index(crtc)));
13202 intel_modeset_verify_crtc(struct drm_crtc *crtc,
13203 struct drm_crtc_state *old_state,
13204 struct drm_crtc_state *new_state)
13206 if (!needs_modeset(new_state) &&
13207 !to_intel_crtc_state(new_state)->update_pipe)
13210 verify_wm_state(crtc, new_state);
13211 verify_connector_state(crtc->dev, crtc);
13212 verify_crtc_state(crtc, old_state, new_state);
13213 verify_shared_dpll_state(crtc->dev, crtc, old_state, new_state);
13217 verify_disabled_dpll_state(struct drm_device *dev)
13219 struct drm_i915_private *dev_priv = dev->dev_private;
13222 for (i = 0; i < dev_priv->num_shared_dpll; i++)
13223 verify_single_dpll_state(dev_priv, &dev_priv->shared_dplls[i], NULL, NULL);
13227 intel_modeset_verify_disabled(struct drm_device *dev)
13229 verify_encoder_state(dev);
13230 verify_connector_state(dev, NULL);
13231 verify_disabled_dpll_state(dev);
13234 static void update_scanline_offset(struct intel_crtc *crtc)
13236 struct drm_device *dev = crtc->base.dev;
13239 * The scanline counter increments at the leading edge of hsync.
13241 * On most platforms it starts counting from vtotal-1 on the
13242 * first active line. That means the scanline counter value is
13243 * always one less than what we would expect. Ie. just after
13244 * start of vblank, which also occurs at start of hsync (on the
13245 * last active line), the scanline counter will read vblank_start-1.
13247 * On gen2 the scanline counter starts counting from 1 instead
13248 * of vtotal-1, so we have to subtract one (or rather add vtotal-1
13249 * to keep the value positive), instead of adding one.
13251 * On HSW+ the behaviour of the scanline counter depends on the output
13252 * type. For DP ports it behaves like most other platforms, but on HDMI
13253 * there's an extra 1 line difference. So we need to add two instead of
13254 * one to the value.
13256 if (IS_GEN2(dev)) {
13257 const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
13260 vtotal = adjusted_mode->crtc_vtotal;
13261 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
13264 crtc->scanline_offset = vtotal - 1;
13265 } else if (HAS_DDI(dev) &&
13266 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
13267 crtc->scanline_offset = 2;
13269 crtc->scanline_offset = 1;
13272 static void intel_modeset_clear_plls(struct drm_atomic_state *state)
13274 struct drm_device *dev = state->dev;
13275 struct drm_i915_private *dev_priv = to_i915(dev);
13276 struct intel_shared_dpll_config *shared_dpll = NULL;
13277 struct drm_crtc *crtc;
13278 struct drm_crtc_state *crtc_state;
13281 if (!dev_priv->display.crtc_compute_clock)
13284 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13285 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13286 struct intel_shared_dpll *old_dpll =
13287 to_intel_crtc_state(crtc->state)->shared_dpll;
13289 if (!needs_modeset(crtc_state))
13292 to_intel_crtc_state(crtc_state)->shared_dpll = NULL;
13298 shared_dpll = intel_atomic_get_shared_dpll_state(state);
13300 intel_shared_dpll_config_put(shared_dpll, old_dpll, intel_crtc);
13305 * This implements the workaround described in the "notes" section of the mode
13306 * set sequence documentation. When going from no pipes or single pipe to
13307 * multiple pipes, and planes are enabled after the pipe, we need to wait at
13308 * least 2 vblanks on the first pipe before enabling planes on the second pipe.
13310 static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
13312 struct drm_crtc_state *crtc_state;
13313 struct intel_crtc *intel_crtc;
13314 struct drm_crtc *crtc;
13315 struct intel_crtc_state *first_crtc_state = NULL;
13316 struct intel_crtc_state *other_crtc_state = NULL;
13317 enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
13320 /* look at all crtc's that are going to be enabled in during modeset */
13321 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13322 intel_crtc = to_intel_crtc(crtc);
13324 if (!crtc_state->active || !needs_modeset(crtc_state))
13327 if (first_crtc_state) {
13328 other_crtc_state = to_intel_crtc_state(crtc_state);
13331 first_crtc_state = to_intel_crtc_state(crtc_state);
13332 first_pipe = intel_crtc->pipe;
13336 /* No workaround needed? */
13337 if (!first_crtc_state)
13340 /* w/a possibly needed, check how many crtc's are already enabled. */
13341 for_each_intel_crtc(state->dev, intel_crtc) {
13342 struct intel_crtc_state *pipe_config;
13344 pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
13345 if (IS_ERR(pipe_config))
13346 return PTR_ERR(pipe_config);
13348 pipe_config->hsw_workaround_pipe = INVALID_PIPE;
13350 if (!pipe_config->base.active ||
13351 needs_modeset(&pipe_config->base))
13354 /* 2 or more enabled crtcs means no need for w/a */
13355 if (enabled_pipe != INVALID_PIPE)
13358 enabled_pipe = intel_crtc->pipe;
13361 if (enabled_pipe != INVALID_PIPE)
13362 first_crtc_state->hsw_workaround_pipe = enabled_pipe;
13363 else if (other_crtc_state)
13364 other_crtc_state->hsw_workaround_pipe = first_pipe;
13369 static int intel_modeset_all_pipes(struct drm_atomic_state *state)
13371 struct drm_crtc *crtc;
13372 struct drm_crtc_state *crtc_state;
13375 /* add all active pipes to the state */
13376 for_each_crtc(state->dev, crtc) {
13377 crtc_state = drm_atomic_get_crtc_state(state, crtc);
13378 if (IS_ERR(crtc_state))
13379 return PTR_ERR(crtc_state);
13381 if (!crtc_state->active || needs_modeset(crtc_state))
13384 crtc_state->mode_changed = true;
13386 ret = drm_atomic_add_affected_connectors(state, crtc);
13390 ret = drm_atomic_add_affected_planes(state, crtc);
13398 static int intel_modeset_checks(struct drm_atomic_state *state)
13400 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13401 struct drm_i915_private *dev_priv = state->dev->dev_private;
13402 struct drm_crtc *crtc;
13403 struct drm_crtc_state *crtc_state;
13406 if (!check_digital_port_conflicts(state)) {
13407 DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
13411 intel_state->modeset = true;
13412 intel_state->active_crtcs = dev_priv->active_crtcs;
13414 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13415 if (crtc_state->active)
13416 intel_state->active_crtcs |= 1 << i;
13418 intel_state->active_crtcs &= ~(1 << i);
13420 if (crtc_state->active != crtc->state->active)
13421 intel_state->active_pipe_changes |= drm_crtc_mask(crtc);
13425 * See if the config requires any additional preparation, e.g.
13426 * to adjust global state with pipes off. We need to do this
13427 * here so we can get the modeset_pipe updated config for the new
13428 * mode set on this crtc. For other crtcs we need to use the
13429 * adjusted_mode bits in the crtc directly.
13431 if (dev_priv->display.modeset_calc_cdclk) {
13432 if (!intel_state->cdclk_pll_vco)
13433 intel_state->cdclk_pll_vco = dev_priv->cdclk_pll.vco;
13434 if (!intel_state->cdclk_pll_vco)
13435 intel_state->cdclk_pll_vco = dev_priv->skl_preferred_vco_freq;
13437 ret = dev_priv->display.modeset_calc_cdclk(state);
13441 if (intel_state->dev_cdclk != dev_priv->cdclk_freq ||
13442 intel_state->cdclk_pll_vco != dev_priv->cdclk_pll.vco)
13443 ret = intel_modeset_all_pipes(state);
13448 DRM_DEBUG_KMS("New cdclk calculated to be atomic %u, actual %u\n",
13449 intel_state->cdclk, intel_state->dev_cdclk);
13451 to_intel_atomic_state(state)->cdclk = dev_priv->atomic_cdclk_freq;
13453 intel_modeset_clear_plls(state);
13455 if (IS_HASWELL(dev_priv))
13456 return haswell_mode_set_planes_workaround(state);
13462 * Handle calculation of various watermark data at the end of the atomic check
13463 * phase. The code here should be run after the per-crtc and per-plane 'check'
13464 * handlers to ensure that all derived state has been updated.
13466 static int calc_watermark_data(struct drm_atomic_state *state)
13468 struct drm_device *dev = state->dev;
13469 struct drm_i915_private *dev_priv = to_i915(dev);
13471 /* Is there platform-specific watermark information to calculate? */
13472 if (dev_priv->display.compute_global_watermarks)
13473 return dev_priv->display.compute_global_watermarks(state);
13479 * intel_atomic_check - validate state object
13481 * @state: state to validate
13483 static int intel_atomic_check(struct drm_device *dev,
13484 struct drm_atomic_state *state)
13486 struct drm_i915_private *dev_priv = to_i915(dev);
13487 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13488 struct drm_crtc *crtc;
13489 struct drm_crtc_state *crtc_state;
13491 bool any_ms = false;
13493 ret = drm_atomic_helper_check_modeset(dev, state);
13497 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13498 struct intel_crtc_state *pipe_config =
13499 to_intel_crtc_state(crtc_state);
13501 /* Catch I915_MODE_FLAG_INHERITED */
13502 if (crtc_state->mode.private_flags != crtc->state->mode.private_flags)
13503 crtc_state->mode_changed = true;
13505 if (!needs_modeset(crtc_state))
13508 if (!crtc_state->enable) {
13513 /* FIXME: For only active_changed we shouldn't need to do any
13514 * state recomputation at all. */
13516 ret = drm_atomic_add_affected_connectors(state, crtc);
13520 ret = intel_modeset_pipe_config(crtc, pipe_config);
13522 intel_dump_pipe_config(to_intel_crtc(crtc),
13523 pipe_config, "[failed]");
13527 if (i915.fastboot &&
13528 intel_pipe_config_compare(dev,
13529 to_intel_crtc_state(crtc->state),
13530 pipe_config, true)) {
13531 crtc_state->mode_changed = false;
13532 to_intel_crtc_state(crtc_state)->update_pipe = true;
13535 if (needs_modeset(crtc_state))
13538 ret = drm_atomic_add_affected_planes(state, crtc);
13542 intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
13543 needs_modeset(crtc_state) ?
13544 "[modeset]" : "[fastset]");
13548 ret = intel_modeset_checks(state);
13553 intel_state->cdclk = dev_priv->cdclk_freq;
13555 ret = drm_atomic_helper_check_planes(dev, state);
13559 intel_fbc_choose_crtc(dev_priv, state);
13560 return calc_watermark_data(state);
13563 static int intel_atomic_prepare_commit(struct drm_device *dev,
13564 struct drm_atomic_state *state,
13567 struct drm_i915_private *dev_priv = dev->dev_private;
13568 struct drm_plane_state *plane_state;
13569 struct drm_crtc_state *crtc_state;
13570 struct drm_plane *plane;
13571 struct drm_crtc *crtc;
13574 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13575 if (state->legacy_cursor_update)
13578 ret = intel_crtc_wait_for_pending_flips(crtc);
13582 if (atomic_read(&to_intel_crtc(crtc)->unpin_work_count) >= 2)
13583 flush_workqueue(dev_priv->wq);
13586 ret = mutex_lock_interruptible(&dev->struct_mutex);
13590 ret = drm_atomic_helper_prepare_planes(dev, state);
13591 mutex_unlock(&dev->struct_mutex);
13593 if (!ret && !nonblock) {
13594 for_each_plane_in_state(state, plane, plane_state, i) {
13595 struct intel_plane_state *intel_plane_state =
13596 to_intel_plane_state(plane_state);
13598 if (!intel_plane_state->wait_req)
13601 ret = __i915_wait_request(intel_plane_state->wait_req,
13604 /* Any hang should be swallowed by the wait */
13605 WARN_ON(ret == -EIO);
13606 mutex_lock(&dev->struct_mutex);
13607 drm_atomic_helper_cleanup_planes(dev, state);
13608 mutex_unlock(&dev->struct_mutex);
13617 u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc)
13619 struct drm_device *dev = crtc->base.dev;
13621 if (!dev->max_vblank_count)
13622 return drm_accurate_vblank_count(&crtc->base);
13624 return dev->driver->get_vblank_counter(dev, crtc->pipe);
13627 static void intel_atomic_wait_for_vblanks(struct drm_device *dev,
13628 struct drm_i915_private *dev_priv,
13629 unsigned crtc_mask)
13631 unsigned last_vblank_count[I915_MAX_PIPES];
13638 for_each_pipe(dev_priv, pipe) {
13639 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
13641 if (!((1 << pipe) & crtc_mask))
13644 ret = drm_crtc_vblank_get(crtc);
13645 if (WARN_ON(ret != 0)) {
13646 crtc_mask &= ~(1 << pipe);
13650 last_vblank_count[pipe] = drm_crtc_vblank_count(crtc);
13653 for_each_pipe(dev_priv, pipe) {
13654 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
13657 if (!((1 << pipe) & crtc_mask))
13660 lret = wait_event_timeout(dev->vblank[pipe].queue,
13661 last_vblank_count[pipe] !=
13662 drm_crtc_vblank_count(crtc),
13663 msecs_to_jiffies(50));
13665 WARN(!lret, "pipe %c vblank wait timed out\n", pipe_name(pipe));
13667 drm_crtc_vblank_put(crtc);
13671 static bool needs_vblank_wait(struct intel_crtc_state *crtc_state)
13673 /* fb updated, need to unpin old fb */
13674 if (crtc_state->fb_changed)
13677 /* wm changes, need vblank before final wm's */
13678 if (crtc_state->update_wm_post)
13682 * cxsr is re-enabled after vblank.
13683 * This is already handled by crtc_state->update_wm_post,
13684 * but added for clarity.
13686 if (crtc_state->disable_cxsr)
13692 static void intel_atomic_commit_tail(struct drm_atomic_state *state)
13694 struct drm_device *dev = state->dev;
13695 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13696 struct drm_i915_private *dev_priv = dev->dev_private;
13697 struct drm_crtc_state *old_crtc_state;
13698 struct drm_crtc *crtc;
13699 struct intel_crtc_state *intel_cstate;
13700 struct drm_plane *plane;
13701 struct drm_plane_state *plane_state;
13702 bool hw_check = intel_state->modeset;
13703 unsigned long put_domains[I915_MAX_PIPES] = {};
13704 unsigned crtc_vblank_mask = 0;
13707 for_each_plane_in_state(state, plane, plane_state, i) {
13708 struct intel_plane_state *intel_plane_state =
13709 to_intel_plane_state(plane_state);
13711 if (!intel_plane_state->wait_req)
13714 ret = __i915_wait_request(intel_plane_state->wait_req,
13716 /* EIO should be eaten, and we can't get interrupted in the
13717 * worker, and blocking commits have waited already. */
13721 drm_atomic_helper_wait_for_dependencies(state);
13723 if (intel_state->modeset) {
13724 memcpy(dev_priv->min_pixclk, intel_state->min_pixclk,
13725 sizeof(intel_state->min_pixclk));
13726 dev_priv->active_crtcs = intel_state->active_crtcs;
13727 dev_priv->atomic_cdclk_freq = intel_state->cdclk;
13729 intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
13732 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13733 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13735 if (needs_modeset(crtc->state) ||
13736 to_intel_crtc_state(crtc->state)->update_pipe) {
13739 put_domains[to_intel_crtc(crtc)->pipe] =
13740 modeset_get_crtc_power_domains(crtc,
13741 to_intel_crtc_state(crtc->state));
13744 if (!needs_modeset(crtc->state))
13747 intel_pre_plane_update(to_intel_crtc_state(old_crtc_state));
13749 if (old_crtc_state->active) {
13750 intel_crtc_disable_planes(crtc, old_crtc_state->plane_mask);
13751 dev_priv->display.crtc_disable(crtc);
13752 intel_crtc->active = false;
13753 intel_fbc_disable(intel_crtc);
13754 intel_disable_shared_dpll(intel_crtc);
13757 * Underruns don't always raise
13758 * interrupts, so check manually.
13760 intel_check_cpu_fifo_underruns(dev_priv);
13761 intel_check_pch_fifo_underruns(dev_priv);
13763 if (!crtc->state->active)
13764 intel_update_watermarks(crtc);
13768 /* Only after disabling all output pipelines that will be changed can we
13769 * update the the output configuration. */
13770 intel_modeset_update_crtc_state(state);
13772 if (intel_state->modeset) {
13773 drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
13775 if (dev_priv->display.modeset_commit_cdclk &&
13776 (intel_state->dev_cdclk != dev_priv->cdclk_freq ||
13777 intel_state->cdclk_pll_vco != dev_priv->cdclk_pll.vco))
13778 dev_priv->display.modeset_commit_cdclk(state);
13780 intel_modeset_verify_disabled(dev);
13783 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
13784 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13785 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13786 bool modeset = needs_modeset(crtc->state);
13787 struct intel_crtc_state *pipe_config =
13788 to_intel_crtc_state(crtc->state);
13790 if (modeset && crtc->state->active) {
13791 update_scanline_offset(to_intel_crtc(crtc));
13792 dev_priv->display.crtc_enable(crtc);
13795 /* Complete events for now disable pipes here. */
13796 if (modeset && !crtc->state->active && crtc->state->event) {
13797 spin_lock_irq(&dev->event_lock);
13798 drm_crtc_send_vblank_event(crtc, crtc->state->event);
13799 spin_unlock_irq(&dev->event_lock);
13801 crtc->state->event = NULL;
13805 intel_pre_plane_update(to_intel_crtc_state(old_crtc_state));
13807 if (crtc->state->active &&
13808 drm_atomic_get_existing_plane_state(state, crtc->primary))
13809 intel_fbc_enable(intel_crtc, pipe_config, to_intel_plane_state(crtc->primary->state));
13811 if (crtc->state->active)
13812 drm_atomic_helper_commit_planes_on_crtc(old_crtc_state);
13814 if (pipe_config->base.active && needs_vblank_wait(pipe_config))
13815 crtc_vblank_mask |= 1 << i;
13818 /* FIXME: We should call drm_atomic_helper_commit_hw_done() here
13819 * already, but still need the state for the delayed optimization. To
13821 * - wrap the optimization/post_plane_update stuff into a per-crtc work.
13822 * - schedule that vblank worker _before_ calling hw_done
13823 * - at the start of commit_tail, cancel it _synchrously
13824 * - switch over to the vblank wait helper in the core after that since
13825 * we don't need out special handling any more.
13827 if (!state->legacy_cursor_update)
13828 intel_atomic_wait_for_vblanks(dev, dev_priv, crtc_vblank_mask);
13831 * Now that the vblank has passed, we can go ahead and program the
13832 * optimal watermarks on platforms that need two-step watermark
13835 * TODO: Move this (and other cleanup) to an async worker eventually.
13837 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13838 intel_cstate = to_intel_crtc_state(crtc->state);
13840 if (dev_priv->display.optimize_watermarks)
13841 dev_priv->display.optimize_watermarks(intel_cstate);
13844 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13845 intel_post_plane_update(to_intel_crtc_state(old_crtc_state));
13847 if (put_domains[i])
13848 modeset_put_power_domains(dev_priv, put_domains[i]);
13850 intel_modeset_verify_crtc(crtc, old_crtc_state, crtc->state);
13853 drm_atomic_helper_commit_hw_done(state);
13855 if (intel_state->modeset)
13856 intel_display_power_put(dev_priv, POWER_DOMAIN_MODESET);
13858 mutex_lock(&dev->struct_mutex);
13859 drm_atomic_helper_cleanup_planes(dev, state);
13860 mutex_unlock(&dev->struct_mutex);
13862 drm_atomic_helper_commit_cleanup_done(state);
13864 drm_atomic_state_free(state);
13866 /* As one of the primary mmio accessors, KMS has a high likelihood
13867 * of triggering bugs in unclaimed access. After we finish
13868 * modesetting, see if an error has been flagged, and if so
13869 * enable debugging for the next modeset - and hope we catch
13872 * XXX note that we assume display power is on at this point.
13873 * This might hold true now but we need to add pm helper to check
13874 * unclaimed only when the hardware is on, as atomic commits
13875 * can happen also when the device is completely off.
13877 intel_uncore_arm_unclaimed_mmio_detection(dev_priv);
13880 static void intel_atomic_commit_work(struct work_struct *work)
13882 struct drm_atomic_state *state = container_of(work,
13883 struct drm_atomic_state,
13885 intel_atomic_commit_tail(state);
13889 * intel_atomic_commit - commit validated state object
13891 * @state: the top-level driver state object
13892 * @nonblock: nonblocking commit
13894 * This function commits a top-level state object that has been validated
13895 * with drm_atomic_helper_check().
13897 * FIXME: Atomic modeset support for i915 is not yet complete. At the moment
13898 * nonblocking commits are only safe for pure plane updates. Everything else
13899 * should work though.
13902 * Zero for success or -errno.
13904 static int intel_atomic_commit(struct drm_device *dev,
13905 struct drm_atomic_state *state,
13908 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13909 struct drm_i915_private *dev_priv = dev->dev_private;
13912 if (intel_state->modeset && nonblock) {
13913 DRM_DEBUG_KMS("nonblocking commit for modeset not yet implemented.\n");
13917 ret = drm_atomic_helper_setup_commit(state, nonblock);
13921 INIT_WORK(&state->commit_work, intel_atomic_commit_work);
13923 ret = intel_atomic_prepare_commit(dev, state, nonblock);
13925 DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret);
13929 drm_atomic_helper_swap_state(state, true);
13930 dev_priv->wm.distrust_bios_wm = false;
13931 dev_priv->wm.skl_results = intel_state->wm_results;
13932 intel_shared_dpll_commit(state);
13935 queue_work(system_unbound_wq, &state->commit_work);
13937 intel_atomic_commit_tail(state);
13942 void intel_crtc_restore_mode(struct drm_crtc *crtc)
13944 struct drm_device *dev = crtc->dev;
13945 struct drm_atomic_state *state;
13946 struct drm_crtc_state *crtc_state;
13949 state = drm_atomic_state_alloc(dev);
13951 DRM_DEBUG_KMS("[CRTC:%d:%s] crtc restore failed, out of memory",
13952 crtc->base.id, crtc->name);
13956 state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
13959 crtc_state = drm_atomic_get_crtc_state(state, crtc);
13960 ret = PTR_ERR_OR_ZERO(crtc_state);
13962 if (!crtc_state->active)
13965 crtc_state->mode_changed = true;
13966 ret = drm_atomic_commit(state);
13969 if (ret == -EDEADLK) {
13970 drm_atomic_state_clear(state);
13971 drm_modeset_backoff(state->acquire_ctx);
13977 drm_atomic_state_free(state);
13980 #undef for_each_intel_crtc_masked
13982 static const struct drm_crtc_funcs intel_crtc_funcs = {
13983 .gamma_set = drm_atomic_helper_legacy_gamma_set,
13984 .set_config = drm_atomic_helper_set_config,
13985 .set_property = drm_atomic_helper_crtc_set_property,
13986 .destroy = intel_crtc_destroy,
13987 .page_flip = intel_crtc_page_flip,
13988 .atomic_duplicate_state = intel_crtc_duplicate_state,
13989 .atomic_destroy_state = intel_crtc_destroy_state,
13993 * intel_prepare_plane_fb - Prepare fb for usage on plane
13994 * @plane: drm plane to prepare for
13995 * @fb: framebuffer to prepare for presentation
13997 * Prepares a framebuffer for usage on a display plane. Generally this
13998 * involves pinning the underlying object and updating the frontbuffer tracking
13999 * bits. Some older platforms need special physical address handling for
14002 * Must be called with struct_mutex held.
14004 * Returns 0 on success, negative error code on failure.
14007 intel_prepare_plane_fb(struct drm_plane *plane,
14008 const struct drm_plane_state *new_state)
14010 struct drm_device *dev = plane->dev;
14011 struct drm_framebuffer *fb = new_state->fb;
14012 struct intel_plane *intel_plane = to_intel_plane(plane);
14013 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
14014 struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->state->fb);
14017 if (!obj && !old_obj)
14021 struct drm_crtc_state *crtc_state =
14022 drm_atomic_get_existing_crtc_state(new_state->state, plane->state->crtc);
14024 /* Big Hammer, we also need to ensure that any pending
14025 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
14026 * current scanout is retired before unpinning the old
14027 * framebuffer. Note that we rely on userspace rendering
14028 * into the buffer attached to the pipe they are waiting
14029 * on. If not, userspace generates a GPU hang with IPEHR
14030 * point to the MI_WAIT_FOR_EVENT.
14032 * This should only fail upon a hung GPU, in which case we
14033 * can safely continue.
14035 if (needs_modeset(crtc_state))
14036 ret = i915_gem_object_wait_rendering(old_obj, true);
14038 /* GPU hangs should have been swallowed by the wait */
14039 WARN_ON(ret == -EIO);
14044 /* For framebuffer backed by dmabuf, wait for fence */
14045 if (obj && obj->base.dma_buf) {
14048 lret = reservation_object_wait_timeout_rcu(obj->base.dma_buf->resv,
14050 MAX_SCHEDULE_TIMEOUT);
14051 if (lret == -ERESTARTSYS)
14054 WARN(lret < 0, "waiting returns %li\n", lret);
14059 } else if (plane->type == DRM_PLANE_TYPE_CURSOR &&
14060 INTEL_INFO(dev)->cursor_needs_physical) {
14061 int align = IS_I830(dev) ? 16 * 1024 : 256;
14062 ret = i915_gem_object_attach_phys(obj, align);
14064 DRM_DEBUG_KMS("failed to attach phys object\n");
14066 ret = intel_pin_and_fence_fb_obj(fb, new_state->rotation);
14071 struct intel_plane_state *plane_state =
14072 to_intel_plane_state(new_state);
14074 i915_gem_request_assign(&plane_state->wait_req,
14075 obj->last_write_req);
14078 i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
14085 * intel_cleanup_plane_fb - Cleans up an fb after plane use
14086 * @plane: drm plane to clean up for
14087 * @fb: old framebuffer that was on plane
14089 * Cleans up a framebuffer that has just been removed from a plane.
14091 * Must be called with struct_mutex held.
14094 intel_cleanup_plane_fb(struct drm_plane *plane,
14095 const struct drm_plane_state *old_state)
14097 struct drm_device *dev = plane->dev;
14098 struct intel_plane *intel_plane = to_intel_plane(plane);
14099 struct intel_plane_state *old_intel_state;
14100 struct drm_i915_gem_object *old_obj = intel_fb_obj(old_state->fb);
14101 struct drm_i915_gem_object *obj = intel_fb_obj(plane->state->fb);
14103 old_intel_state = to_intel_plane_state(old_state);
14105 if (!obj && !old_obj)
14108 if (old_obj && (plane->type != DRM_PLANE_TYPE_CURSOR ||
14109 !INTEL_INFO(dev)->cursor_needs_physical))
14110 intel_unpin_fb_obj(old_state->fb, old_state->rotation);
14112 /* prepare_fb aborted? */
14113 if ((old_obj && (old_obj->frontbuffer_bits & intel_plane->frontbuffer_bit)) ||
14114 (obj && !(obj->frontbuffer_bits & intel_plane->frontbuffer_bit)))
14115 i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
14117 i915_gem_request_assign(&old_intel_state->wait_req, NULL);
14121 skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
14124 struct drm_device *dev;
14125 struct drm_i915_private *dev_priv;
14126 int crtc_clock, cdclk;
14128 if (!intel_crtc || !crtc_state->base.enable)
14129 return DRM_PLANE_HELPER_NO_SCALING;
14131 dev = intel_crtc->base.dev;
14132 dev_priv = dev->dev_private;
14133 crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
14134 cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk;
14136 if (WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock))
14137 return DRM_PLANE_HELPER_NO_SCALING;
14140 * skl max scale is lower of:
14141 * close to 3 but not 3, -1 is for that purpose
14145 max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
14151 intel_check_primary_plane(struct drm_plane *plane,
14152 struct intel_crtc_state *crtc_state,
14153 struct intel_plane_state *state)
14155 struct drm_crtc *crtc = state->base.crtc;
14156 struct drm_framebuffer *fb = state->base.fb;
14157 int min_scale = DRM_PLANE_HELPER_NO_SCALING;
14158 int max_scale = DRM_PLANE_HELPER_NO_SCALING;
14159 bool can_position = false;
14161 if (INTEL_INFO(plane->dev)->gen >= 9) {
14162 /* use scaler when colorkey is not required */
14163 if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
14165 max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
14167 can_position = true;
14170 return drm_plane_helper_check_update(plane, crtc, fb, &state->src,
14171 &state->dst, &state->clip,
14172 min_scale, max_scale,
14173 can_position, true,
14177 static void intel_begin_crtc_commit(struct drm_crtc *crtc,
14178 struct drm_crtc_state *old_crtc_state)
14180 struct drm_device *dev = crtc->dev;
14181 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
14182 struct intel_crtc_state *old_intel_state =
14183 to_intel_crtc_state(old_crtc_state);
14184 bool modeset = needs_modeset(crtc->state);
14186 /* Perform vblank evasion around commit operation */
14187 intel_pipe_update_start(intel_crtc);
14192 if (crtc->state->color_mgmt_changed || to_intel_crtc_state(crtc->state)->update_pipe) {
14193 intel_color_set_csc(crtc->state);
14194 intel_color_load_luts(crtc->state);
14197 if (to_intel_crtc_state(crtc->state)->update_pipe)
14198 intel_update_pipe_config(intel_crtc, old_intel_state);
14199 else if (INTEL_INFO(dev)->gen >= 9)
14200 skl_detach_scalers(intel_crtc);
14203 static void intel_finish_crtc_commit(struct drm_crtc *crtc,
14204 struct drm_crtc_state *old_crtc_state)
14206 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
14208 intel_pipe_update_end(intel_crtc, NULL);
14212 * intel_plane_destroy - destroy a plane
14213 * @plane: plane to destroy
14215 * Common destruction function for all types of planes (primary, cursor,
14218 void intel_plane_destroy(struct drm_plane *plane)
14223 drm_plane_cleanup(plane);
14224 kfree(to_intel_plane(plane));
14227 const struct drm_plane_funcs intel_plane_funcs = {
14228 .update_plane = drm_atomic_helper_update_plane,
14229 .disable_plane = drm_atomic_helper_disable_plane,
14230 .destroy = intel_plane_destroy,
14231 .set_property = drm_atomic_helper_plane_set_property,
14232 .atomic_get_property = intel_plane_atomic_get_property,
14233 .atomic_set_property = intel_plane_atomic_set_property,
14234 .atomic_duplicate_state = intel_plane_duplicate_state,
14235 .atomic_destroy_state = intel_plane_destroy_state,
14239 static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
14242 struct intel_plane *primary = NULL;
14243 struct intel_plane_state *state = NULL;
14244 const uint32_t *intel_primary_formats;
14245 unsigned int num_formats;
14248 primary = kzalloc(sizeof(*primary), GFP_KERNEL);
14252 state = intel_create_plane_state(&primary->base);
14255 primary->base.state = &state->base;
14257 primary->can_scale = false;
14258 primary->max_downscale = 1;
14259 if (INTEL_INFO(dev)->gen >= 9) {
14260 primary->can_scale = true;
14261 state->scaler_id = -1;
14263 primary->pipe = pipe;
14264 primary->plane = pipe;
14265 primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe);
14266 primary->check_plane = intel_check_primary_plane;
14267 if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
14268 primary->plane = !pipe;
14270 if (INTEL_INFO(dev)->gen >= 9) {
14271 intel_primary_formats = skl_primary_formats;
14272 num_formats = ARRAY_SIZE(skl_primary_formats);
14274 primary->update_plane = skylake_update_primary_plane;
14275 primary->disable_plane = skylake_disable_primary_plane;
14276 } else if (HAS_PCH_SPLIT(dev)) {
14277 intel_primary_formats = i965_primary_formats;
14278 num_formats = ARRAY_SIZE(i965_primary_formats);
14280 primary->update_plane = ironlake_update_primary_plane;
14281 primary->disable_plane = i9xx_disable_primary_plane;
14282 } else if (INTEL_INFO(dev)->gen >= 4) {
14283 intel_primary_formats = i965_primary_formats;
14284 num_formats = ARRAY_SIZE(i965_primary_formats);
14286 primary->update_plane = i9xx_update_primary_plane;
14287 primary->disable_plane = i9xx_disable_primary_plane;
14289 intel_primary_formats = i8xx_primary_formats;
14290 num_formats = ARRAY_SIZE(i8xx_primary_formats);
14292 primary->update_plane = i9xx_update_primary_plane;
14293 primary->disable_plane = i9xx_disable_primary_plane;
14296 if (INTEL_INFO(dev)->gen >= 9)
14297 ret = drm_universal_plane_init(dev, &primary->base, 0,
14298 &intel_plane_funcs,
14299 intel_primary_formats, num_formats,
14300 DRM_PLANE_TYPE_PRIMARY,
14301 "plane 1%c", pipe_name(pipe));
14302 else if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
14303 ret = drm_universal_plane_init(dev, &primary->base, 0,
14304 &intel_plane_funcs,
14305 intel_primary_formats, num_formats,
14306 DRM_PLANE_TYPE_PRIMARY,
14307 "primary %c", pipe_name(pipe));
14309 ret = drm_universal_plane_init(dev, &primary->base, 0,
14310 &intel_plane_funcs,
14311 intel_primary_formats, num_formats,
14312 DRM_PLANE_TYPE_PRIMARY,
14313 "plane %c", plane_name(primary->plane));
14317 if (INTEL_INFO(dev)->gen >= 4)
14318 intel_create_rotation_property(dev, primary);
14320 drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
14322 return &primary->base;
14331 void intel_create_rotation_property(struct drm_device *dev, struct intel_plane *plane)
14333 if (!dev->mode_config.rotation_property) {
14334 unsigned long flags = BIT(DRM_ROTATE_0) |
14335 BIT(DRM_ROTATE_180);
14337 if (INTEL_INFO(dev)->gen >= 9)
14338 flags |= BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270);
14340 dev->mode_config.rotation_property =
14341 drm_mode_create_rotation_property(dev, flags);
14343 if (dev->mode_config.rotation_property)
14344 drm_object_attach_property(&plane->base.base,
14345 dev->mode_config.rotation_property,
14346 plane->base.state->rotation);
14350 intel_check_cursor_plane(struct drm_plane *plane,
14351 struct intel_crtc_state *crtc_state,
14352 struct intel_plane_state *state)
14354 struct drm_crtc *crtc = crtc_state->base.crtc;
14355 struct drm_framebuffer *fb = state->base.fb;
14356 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
14357 enum pipe pipe = to_intel_plane(plane)->pipe;
14361 ret = drm_plane_helper_check_update(plane, crtc, fb, &state->src,
14362 &state->dst, &state->clip,
14363 DRM_PLANE_HELPER_NO_SCALING,
14364 DRM_PLANE_HELPER_NO_SCALING,
14365 true, true, &state->visible);
14369 /* if we want to turn off the cursor ignore width and height */
14373 /* Check for which cursor types we support */
14374 if (!cursor_size_ok(plane->dev, state->base.crtc_w, state->base.crtc_h)) {
14375 DRM_DEBUG("Cursor dimension %dx%d not supported\n",
14376 state->base.crtc_w, state->base.crtc_h);
14380 stride = roundup_pow_of_two(state->base.crtc_w) * 4;
14381 if (obj->base.size < stride * state->base.crtc_h) {
14382 DRM_DEBUG_KMS("buffer is too small\n");
14386 if (fb->modifier[0] != DRM_FORMAT_MOD_NONE) {
14387 DRM_DEBUG_KMS("cursor cannot be tiled\n");
14392 * There's something wrong with the cursor on CHV pipe C.
14393 * If it straddles the left edge of the screen then
14394 * moving it away from the edge or disabling it often
14395 * results in a pipe underrun, and often that can lead to
14396 * dead pipe (constant underrun reported, and it scans
14397 * out just a solid color). To recover from that, the
14398 * display power well must be turned off and on again.
14399 * Refuse the put the cursor into that compromised position.
14401 if (IS_CHERRYVIEW(plane->dev) && pipe == PIPE_C &&
14402 state->visible && state->base.crtc_x < 0) {
14403 DRM_DEBUG_KMS("CHV cursor C not allowed to straddle the left screen edge\n");
14411 intel_disable_cursor_plane(struct drm_plane *plane,
14412 struct drm_crtc *crtc)
14414 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
14416 intel_crtc->cursor_addr = 0;
14417 intel_crtc_update_cursor(crtc, NULL);
14421 intel_update_cursor_plane(struct drm_plane *plane,
14422 const struct intel_crtc_state *crtc_state,
14423 const struct intel_plane_state *state)
14425 struct drm_crtc *crtc = crtc_state->base.crtc;
14426 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
14427 struct drm_device *dev = plane->dev;
14428 struct drm_i915_gem_object *obj = intel_fb_obj(state->base.fb);
14433 else if (!INTEL_INFO(dev)->cursor_needs_physical)
14434 addr = i915_gem_obj_ggtt_offset(obj);
14436 addr = obj->phys_handle->busaddr;
14438 intel_crtc->cursor_addr = addr;
14439 intel_crtc_update_cursor(crtc, state);
14442 static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
14445 struct intel_plane *cursor = NULL;
14446 struct intel_plane_state *state = NULL;
14449 cursor = kzalloc(sizeof(*cursor), GFP_KERNEL);
14453 state = intel_create_plane_state(&cursor->base);
14456 cursor->base.state = &state->base;
14458 cursor->can_scale = false;
14459 cursor->max_downscale = 1;
14460 cursor->pipe = pipe;
14461 cursor->plane = pipe;
14462 cursor->frontbuffer_bit = INTEL_FRONTBUFFER_CURSOR(pipe);
14463 cursor->check_plane = intel_check_cursor_plane;
14464 cursor->update_plane = intel_update_cursor_plane;
14465 cursor->disable_plane = intel_disable_cursor_plane;
14467 ret = drm_universal_plane_init(dev, &cursor->base, 0,
14468 &intel_plane_funcs,
14469 intel_cursor_formats,
14470 ARRAY_SIZE(intel_cursor_formats),
14471 DRM_PLANE_TYPE_CURSOR,
14472 "cursor %c", pipe_name(pipe));
14476 if (INTEL_INFO(dev)->gen >= 4) {
14477 if (!dev->mode_config.rotation_property)
14478 dev->mode_config.rotation_property =
14479 drm_mode_create_rotation_property(dev,
14480 BIT(DRM_ROTATE_0) |
14481 BIT(DRM_ROTATE_180));
14482 if (dev->mode_config.rotation_property)
14483 drm_object_attach_property(&cursor->base.base,
14484 dev->mode_config.rotation_property,
14485 state->base.rotation);
14488 if (INTEL_INFO(dev)->gen >=9)
14489 state->scaler_id = -1;
14491 drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
14493 return &cursor->base;
14502 static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
14503 struct intel_crtc_state *crtc_state)
14506 struct intel_scaler *intel_scaler;
14507 struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state;
14509 for (i = 0; i < intel_crtc->num_scalers; i++) {
14510 intel_scaler = &scaler_state->scalers[i];
14511 intel_scaler->in_use = 0;
14512 intel_scaler->mode = PS_SCALER_MODE_DYN;
14515 scaler_state->scaler_id = -1;
14518 static void intel_crtc_init(struct drm_device *dev, int pipe)
14520 struct drm_i915_private *dev_priv = dev->dev_private;
14521 struct intel_crtc *intel_crtc;
14522 struct intel_crtc_state *crtc_state = NULL;
14523 struct drm_plane *primary = NULL;
14524 struct drm_plane *cursor = NULL;
14527 intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
14528 if (intel_crtc == NULL)
14531 crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
14534 intel_crtc->config = crtc_state;
14535 intel_crtc->base.state = &crtc_state->base;
14536 crtc_state->base.crtc = &intel_crtc->base;
14538 /* initialize shared scalers */
14539 if (INTEL_INFO(dev)->gen >= 9) {
14540 if (pipe == PIPE_C)
14541 intel_crtc->num_scalers = 1;
14543 intel_crtc->num_scalers = SKL_NUM_SCALERS;
14545 skl_init_scalers(dev, intel_crtc, crtc_state);
14548 primary = intel_primary_plane_create(dev, pipe);
14552 cursor = intel_cursor_plane_create(dev, pipe);
14556 ret = drm_crtc_init_with_planes(dev, &intel_crtc->base, primary,
14557 cursor, &intel_crtc_funcs,
14558 "pipe %c", pipe_name(pipe));
14563 * On gen2/3 only plane A can do fbc, but the panel fitter and lvds port
14564 * is hooked to pipe B. Hence we want plane A feeding pipe B.
14566 intel_crtc->pipe = pipe;
14567 intel_crtc->plane = pipe;
14568 if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
14569 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
14570 intel_crtc->plane = !pipe;
14573 intel_crtc->cursor_base = ~0;
14574 intel_crtc->cursor_cntl = ~0;
14575 intel_crtc->cursor_size = ~0;
14577 intel_crtc->wm.cxsr_allowed = true;
14579 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
14580 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
14581 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
14582 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
14584 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
14586 intel_color_init(&intel_crtc->base);
14588 WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
14592 intel_plane_destroy(primary);
14593 intel_plane_destroy(cursor);
14598 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
14600 struct drm_encoder *encoder = connector->base.encoder;
14601 struct drm_device *dev = connector->base.dev;
14603 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
14605 if (!encoder || WARN_ON(!encoder->crtc))
14606 return INVALID_PIPE;
14608 return to_intel_crtc(encoder->crtc)->pipe;
14611 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
14612 struct drm_file *file)
14614 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
14615 struct drm_crtc *drmmode_crtc;
14616 struct intel_crtc *crtc;
14618 drmmode_crtc = drm_crtc_find(dev, pipe_from_crtc_id->crtc_id);
14620 if (!drmmode_crtc) {
14621 DRM_ERROR("no such CRTC id\n");
14625 crtc = to_intel_crtc(drmmode_crtc);
14626 pipe_from_crtc_id->pipe = crtc->pipe;
14631 static int intel_encoder_clones(struct intel_encoder *encoder)
14633 struct drm_device *dev = encoder->base.dev;
14634 struct intel_encoder *source_encoder;
14635 int index_mask = 0;
14638 for_each_intel_encoder(dev, source_encoder) {
14639 if (encoders_cloneable(encoder, source_encoder))
14640 index_mask |= (1 << entry);
14648 static bool has_edp_a(struct drm_device *dev)
14650 struct drm_i915_private *dev_priv = dev->dev_private;
14652 if (!IS_MOBILE(dev))
14655 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
14658 if (IS_GEN5(dev) && (I915_READ(FUSE_STRAP) & ILK_eDP_A_DISABLE))
14664 static bool intel_crt_present(struct drm_device *dev)
14666 struct drm_i915_private *dev_priv = dev->dev_private;
14668 if (INTEL_INFO(dev)->gen >= 9)
14671 if (IS_HSW_ULT(dev) || IS_BDW_ULT(dev))
14674 if (IS_CHERRYVIEW(dev))
14677 if (HAS_PCH_LPT_H(dev) && I915_READ(SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED)
14680 /* DDI E can't be used if DDI A requires 4 lanes */
14681 if (HAS_DDI(dev) && I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
14684 if (!dev_priv->vbt.int_crt_support)
14690 static void intel_setup_outputs(struct drm_device *dev)
14692 struct drm_i915_private *dev_priv = dev->dev_private;
14693 struct intel_encoder *encoder;
14694 bool dpd_is_edp = false;
14696 intel_lvds_init(dev);
14698 if (intel_crt_present(dev))
14699 intel_crt_init(dev);
14701 if (IS_BROXTON(dev)) {
14703 * FIXME: Broxton doesn't support port detection via the
14704 * DDI_BUF_CTL_A or SFUSE_STRAP registers, find another way to
14705 * detect the ports.
14707 intel_ddi_init(dev, PORT_A);
14708 intel_ddi_init(dev, PORT_B);
14709 intel_ddi_init(dev, PORT_C);
14711 intel_dsi_init(dev);
14712 } else if (HAS_DDI(dev)) {
14716 * Haswell uses DDI functions to detect digital outputs.
14717 * On SKL pre-D0 the strap isn't connected, so we assume
14720 found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
14721 /* WaIgnoreDDIAStrap: skl */
14722 if (found || IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
14723 intel_ddi_init(dev, PORT_A);
14725 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
14727 found = I915_READ(SFUSE_STRAP);
14729 if (found & SFUSE_STRAP_DDIB_DETECTED)
14730 intel_ddi_init(dev, PORT_B);
14731 if (found & SFUSE_STRAP_DDIC_DETECTED)
14732 intel_ddi_init(dev, PORT_C);
14733 if (found & SFUSE_STRAP_DDID_DETECTED)
14734 intel_ddi_init(dev, PORT_D);
14736 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
14738 if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
14739 (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
14740 dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
14741 dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
14742 intel_ddi_init(dev, PORT_E);
14744 } else if (HAS_PCH_SPLIT(dev)) {
14746 dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
14748 if (has_edp_a(dev))
14749 intel_dp_init(dev, DP_A, PORT_A);
14751 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
14752 /* PCH SDVOB multiplex with HDMIB */
14753 found = intel_sdvo_init(dev, PCH_SDVOB, PORT_B);
14755 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
14756 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
14757 intel_dp_init(dev, PCH_DP_B, PORT_B);
14760 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
14761 intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
14763 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
14764 intel_hdmi_init(dev, PCH_HDMID, PORT_D);
14766 if (I915_READ(PCH_DP_C) & DP_DETECTED)
14767 intel_dp_init(dev, PCH_DP_C, PORT_C);
14769 if (I915_READ(PCH_DP_D) & DP_DETECTED)
14770 intel_dp_init(dev, PCH_DP_D, PORT_D);
14771 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
14772 bool has_edp, has_port;
14775 * The DP_DETECTED bit is the latched state of the DDC
14776 * SDA pin at boot. However since eDP doesn't require DDC
14777 * (no way to plug in a DP->HDMI dongle) the DDC pins for
14778 * eDP ports may have been muxed to an alternate function.
14779 * Thus we can't rely on the DP_DETECTED bit alone to detect
14780 * eDP ports. Consult the VBT as well as DP_DETECTED to
14781 * detect eDP ports.
14783 * Sadly the straps seem to be missing sometimes even for HDMI
14784 * ports (eg. on Voyo V3 - CHT x7-Z8700), so check both strap
14785 * and VBT for the presence of the port. Additionally we can't
14786 * trust the port type the VBT declares as we've seen at least
14787 * HDMI ports that the VBT claim are DP or eDP.
14789 has_edp = intel_dp_is_edp(dev, PORT_B);
14790 has_port = intel_bios_is_port_present(dev_priv, PORT_B);
14791 if (I915_READ(VLV_DP_B) & DP_DETECTED || has_port)
14792 has_edp &= intel_dp_init(dev, VLV_DP_B, PORT_B);
14793 if ((I915_READ(VLV_HDMIB) & SDVO_DETECTED || has_port) && !has_edp)
14794 intel_hdmi_init(dev, VLV_HDMIB, PORT_B);
14796 has_edp = intel_dp_is_edp(dev, PORT_C);
14797 has_port = intel_bios_is_port_present(dev_priv, PORT_C);
14798 if (I915_READ(VLV_DP_C) & DP_DETECTED || has_port)
14799 has_edp &= intel_dp_init(dev, VLV_DP_C, PORT_C);
14800 if ((I915_READ(VLV_HDMIC) & SDVO_DETECTED || has_port) && !has_edp)
14801 intel_hdmi_init(dev, VLV_HDMIC, PORT_C);
14803 if (IS_CHERRYVIEW(dev)) {
14805 * eDP not supported on port D,
14806 * so no need to worry about it
14808 has_port = intel_bios_is_port_present(dev_priv, PORT_D);
14809 if (I915_READ(CHV_DP_D) & DP_DETECTED || has_port)
14810 intel_dp_init(dev, CHV_DP_D, PORT_D);
14811 if (I915_READ(CHV_HDMID) & SDVO_DETECTED || has_port)
14812 intel_hdmi_init(dev, CHV_HDMID, PORT_D);
14815 intel_dsi_init(dev);
14816 } else if (!IS_GEN2(dev) && !IS_PINEVIEW(dev)) {
14817 bool found = false;
14819 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
14820 DRM_DEBUG_KMS("probing SDVOB\n");
14821 found = intel_sdvo_init(dev, GEN3_SDVOB, PORT_B);
14822 if (!found && IS_G4X(dev)) {
14823 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
14824 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
14827 if (!found && IS_G4X(dev))
14828 intel_dp_init(dev, DP_B, PORT_B);
14831 /* Before G4X SDVOC doesn't have its own detect register */
14833 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
14834 DRM_DEBUG_KMS("probing SDVOC\n");
14835 found = intel_sdvo_init(dev, GEN3_SDVOC, PORT_C);
14838 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
14841 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
14842 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
14845 intel_dp_init(dev, DP_C, PORT_C);
14849 (I915_READ(DP_D) & DP_DETECTED))
14850 intel_dp_init(dev, DP_D, PORT_D);
14851 } else if (IS_GEN2(dev))
14852 intel_dvo_init(dev);
14854 if (SUPPORTS_TV(dev))
14855 intel_tv_init(dev);
14857 intel_psr_init(dev);
14859 for_each_intel_encoder(dev, encoder) {
14860 encoder->base.possible_crtcs = encoder->crtc_mask;
14861 encoder->base.possible_clones =
14862 intel_encoder_clones(encoder);
14865 intel_init_pch_refclk(dev);
14867 drm_helper_move_panel_connectors_to_head(dev);
14870 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
14872 struct drm_device *dev = fb->dev;
14873 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14875 drm_framebuffer_cleanup(fb);
14876 mutex_lock(&dev->struct_mutex);
14877 WARN_ON(!intel_fb->obj->framebuffer_references--);
14878 drm_gem_object_unreference(&intel_fb->obj->base);
14879 mutex_unlock(&dev->struct_mutex);
14883 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
14884 struct drm_file *file,
14885 unsigned int *handle)
14887 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14888 struct drm_i915_gem_object *obj = intel_fb->obj;
14890 if (obj->userptr.mm) {
14891 DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
14895 return drm_gem_handle_create(file, &obj->base, handle);
14898 static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,
14899 struct drm_file *file,
14900 unsigned flags, unsigned color,
14901 struct drm_clip_rect *clips,
14902 unsigned num_clips)
14904 struct drm_device *dev = fb->dev;
14905 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14906 struct drm_i915_gem_object *obj = intel_fb->obj;
14908 mutex_lock(&dev->struct_mutex);
14909 intel_fb_obj_flush(obj, false, ORIGIN_DIRTYFB);
14910 mutex_unlock(&dev->struct_mutex);
14915 static const struct drm_framebuffer_funcs intel_fb_funcs = {
14916 .destroy = intel_user_framebuffer_destroy,
14917 .create_handle = intel_user_framebuffer_create_handle,
14918 .dirty = intel_user_framebuffer_dirty,
14922 u32 intel_fb_pitch_limit(struct drm_device *dev, uint64_t fb_modifier,
14923 uint32_t pixel_format)
14925 u32 gen = INTEL_INFO(dev)->gen;
14928 int cpp = drm_format_plane_cpp(pixel_format, 0);
14930 /* "The stride in bytes must not exceed the of the size of 8K
14931 * pixels and 32K bytes."
14933 return min(8192 * cpp, 32768);
14934 } else if (gen >= 5 && !IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
14936 } else if (gen >= 4) {
14937 if (fb_modifier == I915_FORMAT_MOD_X_TILED)
14941 } else if (gen >= 3) {
14942 if (fb_modifier == I915_FORMAT_MOD_X_TILED)
14947 /* XXX DSPC is limited to 4k tiled */
14952 static int intel_framebuffer_init(struct drm_device *dev,
14953 struct intel_framebuffer *intel_fb,
14954 struct drm_mode_fb_cmd2 *mode_cmd,
14955 struct drm_i915_gem_object *obj)
14957 struct drm_i915_private *dev_priv = to_i915(dev);
14958 unsigned int aligned_height;
14960 u32 pitch_limit, stride_alignment;
14962 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
14964 if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) {
14965 /* Enforce that fb modifier and tiling mode match, but only for
14966 * X-tiled. This is needed for FBC. */
14967 if (!!(obj->tiling_mode == I915_TILING_X) !=
14968 !!(mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED)) {
14969 DRM_DEBUG("tiling_mode doesn't match fb modifier\n");
14973 if (obj->tiling_mode == I915_TILING_X)
14974 mode_cmd->modifier[0] = I915_FORMAT_MOD_X_TILED;
14975 else if (obj->tiling_mode == I915_TILING_Y) {
14976 DRM_DEBUG("No Y tiling for legacy addfb\n");
14981 /* Passed in modifier sanity checking. */
14982 switch (mode_cmd->modifier[0]) {
14983 case I915_FORMAT_MOD_Y_TILED:
14984 case I915_FORMAT_MOD_Yf_TILED:
14985 if (INTEL_INFO(dev)->gen < 9) {
14986 DRM_DEBUG("Unsupported tiling 0x%llx!\n",
14987 mode_cmd->modifier[0]);
14990 case DRM_FORMAT_MOD_NONE:
14991 case I915_FORMAT_MOD_X_TILED:
14994 DRM_DEBUG("Unsupported fb modifier 0x%llx!\n",
14995 mode_cmd->modifier[0]);
14999 stride_alignment = intel_fb_stride_alignment(dev_priv,
15000 mode_cmd->modifier[0],
15001 mode_cmd->pixel_format);
15002 if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
15003 DRM_DEBUG("pitch (%d) must be at least %u byte aligned\n",
15004 mode_cmd->pitches[0], stride_alignment);
15008 pitch_limit = intel_fb_pitch_limit(dev, mode_cmd->modifier[0],
15009 mode_cmd->pixel_format);
15010 if (mode_cmd->pitches[0] > pitch_limit) {
15011 DRM_DEBUG("%s pitch (%u) must be at less than %d\n",
15012 mode_cmd->modifier[0] != DRM_FORMAT_MOD_NONE ?
15013 "tiled" : "linear",
15014 mode_cmd->pitches[0], pitch_limit);
15018 if (mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED &&
15019 mode_cmd->pitches[0] != obj->stride) {
15020 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
15021 mode_cmd->pitches[0], obj->stride);
15025 /* Reject formats not supported by any plane early. */
15026 switch (mode_cmd->pixel_format) {
15027 case DRM_FORMAT_C8:
15028 case DRM_FORMAT_RGB565:
15029 case DRM_FORMAT_XRGB8888:
15030 case DRM_FORMAT_ARGB8888:
15032 case DRM_FORMAT_XRGB1555:
15033 if (INTEL_INFO(dev)->gen > 3) {
15034 DRM_DEBUG("unsupported pixel format: %s\n",
15035 drm_get_format_name(mode_cmd->pixel_format));
15039 case DRM_FORMAT_ABGR8888:
15040 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) &&
15041 INTEL_INFO(dev)->gen < 9) {
15042 DRM_DEBUG("unsupported pixel format: %s\n",
15043 drm_get_format_name(mode_cmd->pixel_format));
15047 case DRM_FORMAT_XBGR8888:
15048 case DRM_FORMAT_XRGB2101010:
15049 case DRM_FORMAT_XBGR2101010:
15050 if (INTEL_INFO(dev)->gen < 4) {
15051 DRM_DEBUG("unsupported pixel format: %s\n",
15052 drm_get_format_name(mode_cmd->pixel_format));
15056 case DRM_FORMAT_ABGR2101010:
15057 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
15058 DRM_DEBUG("unsupported pixel format: %s\n",
15059 drm_get_format_name(mode_cmd->pixel_format));
15063 case DRM_FORMAT_YUYV:
15064 case DRM_FORMAT_UYVY:
15065 case DRM_FORMAT_YVYU:
15066 case DRM_FORMAT_VYUY:
15067 if (INTEL_INFO(dev)->gen < 5) {
15068 DRM_DEBUG("unsupported pixel format: %s\n",
15069 drm_get_format_name(mode_cmd->pixel_format));
15074 DRM_DEBUG("unsupported pixel format: %s\n",
15075 drm_get_format_name(mode_cmd->pixel_format));
15079 /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
15080 if (mode_cmd->offsets[0] != 0)
15083 aligned_height = intel_fb_align_height(dev, mode_cmd->height,
15084 mode_cmd->pixel_format,
15085 mode_cmd->modifier[0]);
15086 /* FIXME drm helper for size checks (especially planar formats)? */
15087 if (obj->base.size < aligned_height * mode_cmd->pitches[0])
15090 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
15091 intel_fb->obj = obj;
15093 intel_fill_fb_info(dev_priv, &intel_fb->base);
15095 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
15097 DRM_ERROR("framebuffer init failed %d\n", ret);
15101 intel_fb->obj->framebuffer_references++;
15106 static struct drm_framebuffer *
15107 intel_user_framebuffer_create(struct drm_device *dev,
15108 struct drm_file *filp,
15109 const struct drm_mode_fb_cmd2 *user_mode_cmd)
15111 struct drm_framebuffer *fb;
15112 struct drm_i915_gem_object *obj;
15113 struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd;
15115 obj = to_intel_bo(drm_gem_object_lookup(filp, mode_cmd.handles[0]));
15116 if (&obj->base == NULL)
15117 return ERR_PTR(-ENOENT);
15119 fb = intel_framebuffer_create(dev, &mode_cmd, obj);
15121 drm_gem_object_unreference_unlocked(&obj->base);
15126 #ifndef CONFIG_DRM_FBDEV_EMULATION
15127 static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
15132 static const struct drm_mode_config_funcs intel_mode_funcs = {
15133 .fb_create = intel_user_framebuffer_create,
15134 .output_poll_changed = intel_fbdev_output_poll_changed,
15135 .atomic_check = intel_atomic_check,
15136 .atomic_commit = intel_atomic_commit,
15137 .atomic_state_alloc = intel_atomic_state_alloc,
15138 .atomic_state_clear = intel_atomic_state_clear,
15142 * intel_init_display_hooks - initialize the display modesetting hooks
15143 * @dev_priv: device private
15145 void intel_init_display_hooks(struct drm_i915_private *dev_priv)
15147 if (INTEL_INFO(dev_priv)->gen >= 9) {
15148 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
15149 dev_priv->display.get_initial_plane_config =
15150 skylake_get_initial_plane_config;
15151 dev_priv->display.crtc_compute_clock =
15152 haswell_crtc_compute_clock;
15153 dev_priv->display.crtc_enable = haswell_crtc_enable;
15154 dev_priv->display.crtc_disable = haswell_crtc_disable;
15155 } else if (HAS_DDI(dev_priv)) {
15156 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
15157 dev_priv->display.get_initial_plane_config =
15158 ironlake_get_initial_plane_config;
15159 dev_priv->display.crtc_compute_clock =
15160 haswell_crtc_compute_clock;
15161 dev_priv->display.crtc_enable = haswell_crtc_enable;
15162 dev_priv->display.crtc_disable = haswell_crtc_disable;
15163 } else if (HAS_PCH_SPLIT(dev_priv)) {
15164 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
15165 dev_priv->display.get_initial_plane_config =
15166 ironlake_get_initial_plane_config;
15167 dev_priv->display.crtc_compute_clock =
15168 ironlake_crtc_compute_clock;
15169 dev_priv->display.crtc_enable = ironlake_crtc_enable;
15170 dev_priv->display.crtc_disable = ironlake_crtc_disable;
15171 } else if (IS_CHERRYVIEW(dev_priv)) {
15172 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
15173 dev_priv->display.get_initial_plane_config =
15174 i9xx_get_initial_plane_config;
15175 dev_priv->display.crtc_compute_clock = chv_crtc_compute_clock;
15176 dev_priv->display.crtc_enable = valleyview_crtc_enable;
15177 dev_priv->display.crtc_disable = i9xx_crtc_disable;
15178 } else if (IS_VALLEYVIEW(dev_priv)) {
15179 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
15180 dev_priv->display.get_initial_plane_config =
15181 i9xx_get_initial_plane_config;
15182 dev_priv->display.crtc_compute_clock = vlv_crtc_compute_clock;
15183 dev_priv->display.crtc_enable = valleyview_crtc_enable;
15184 dev_priv->display.crtc_disable = i9xx_crtc_disable;
15185 } else if (IS_G4X(dev_priv)) {
15186 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
15187 dev_priv->display.get_initial_plane_config =
15188 i9xx_get_initial_plane_config;
15189 dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock;
15190 dev_priv->display.crtc_enable = i9xx_crtc_enable;
15191 dev_priv->display.crtc_disable = i9xx_crtc_disable;
15192 } else if (IS_PINEVIEW(dev_priv)) {
15193 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
15194 dev_priv->display.get_initial_plane_config =
15195 i9xx_get_initial_plane_config;
15196 dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock;
15197 dev_priv->display.crtc_enable = i9xx_crtc_enable;
15198 dev_priv->display.crtc_disable = i9xx_crtc_disable;
15199 } else if (!IS_GEN2(dev_priv)) {
15200 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
15201 dev_priv->display.get_initial_plane_config =
15202 i9xx_get_initial_plane_config;
15203 dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
15204 dev_priv->display.crtc_enable = i9xx_crtc_enable;
15205 dev_priv->display.crtc_disable = i9xx_crtc_disable;
15207 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
15208 dev_priv->display.get_initial_plane_config =
15209 i9xx_get_initial_plane_config;
15210 dev_priv->display.crtc_compute_clock = i8xx_crtc_compute_clock;
15211 dev_priv->display.crtc_enable = i9xx_crtc_enable;
15212 dev_priv->display.crtc_disable = i9xx_crtc_disable;
15215 /* Returns the core display clock speed */
15216 if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
15217 dev_priv->display.get_display_clock_speed =
15218 skylake_get_display_clock_speed;
15219 else if (IS_BROXTON(dev_priv))
15220 dev_priv->display.get_display_clock_speed =
15221 broxton_get_display_clock_speed;
15222 else if (IS_BROADWELL(dev_priv))
15223 dev_priv->display.get_display_clock_speed =
15224 broadwell_get_display_clock_speed;
15225 else if (IS_HASWELL(dev_priv))
15226 dev_priv->display.get_display_clock_speed =
15227 haswell_get_display_clock_speed;
15228 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
15229 dev_priv->display.get_display_clock_speed =
15230 valleyview_get_display_clock_speed;
15231 else if (IS_GEN5(dev_priv))
15232 dev_priv->display.get_display_clock_speed =
15233 ilk_get_display_clock_speed;
15234 else if (IS_I945G(dev_priv) || IS_BROADWATER(dev_priv) ||
15235 IS_GEN6(dev_priv) || IS_IVYBRIDGE(dev_priv))
15236 dev_priv->display.get_display_clock_speed =
15237 i945_get_display_clock_speed;
15238 else if (IS_GM45(dev_priv))
15239 dev_priv->display.get_display_clock_speed =
15240 gm45_get_display_clock_speed;
15241 else if (IS_CRESTLINE(dev_priv))
15242 dev_priv->display.get_display_clock_speed =
15243 i965gm_get_display_clock_speed;
15244 else if (IS_PINEVIEW(dev_priv))
15245 dev_priv->display.get_display_clock_speed =
15246 pnv_get_display_clock_speed;
15247 else if (IS_G33(dev_priv) || IS_G4X(dev_priv))
15248 dev_priv->display.get_display_clock_speed =
15249 g33_get_display_clock_speed;
15250 else if (IS_I915G(dev_priv))
15251 dev_priv->display.get_display_clock_speed =
15252 i915_get_display_clock_speed;
15253 else if (IS_I945GM(dev_priv) || IS_845G(dev_priv))
15254 dev_priv->display.get_display_clock_speed =
15255 i9xx_misc_get_display_clock_speed;
15256 else if (IS_I915GM(dev_priv))
15257 dev_priv->display.get_display_clock_speed =
15258 i915gm_get_display_clock_speed;
15259 else if (IS_I865G(dev_priv))
15260 dev_priv->display.get_display_clock_speed =
15261 i865_get_display_clock_speed;
15262 else if (IS_I85X(dev_priv))
15263 dev_priv->display.get_display_clock_speed =
15264 i85x_get_display_clock_speed;
15266 WARN(!IS_I830(dev_priv), "Unknown platform. Assuming 133 MHz CDCLK\n");
15267 dev_priv->display.get_display_clock_speed =
15268 i830_get_display_clock_speed;
15271 if (IS_GEN5(dev_priv)) {
15272 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
15273 } else if (IS_GEN6(dev_priv)) {
15274 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
15275 } else if (IS_IVYBRIDGE(dev_priv)) {
15276 /* FIXME: detect B0+ stepping and use auto training */
15277 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
15278 } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
15279 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
15282 if (IS_BROADWELL(dev_priv)) {
15283 dev_priv->display.modeset_commit_cdclk =
15284 broadwell_modeset_commit_cdclk;
15285 dev_priv->display.modeset_calc_cdclk =
15286 broadwell_modeset_calc_cdclk;
15287 } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
15288 dev_priv->display.modeset_commit_cdclk =
15289 valleyview_modeset_commit_cdclk;
15290 dev_priv->display.modeset_calc_cdclk =
15291 valleyview_modeset_calc_cdclk;
15292 } else if (IS_BROXTON(dev_priv)) {
15293 dev_priv->display.modeset_commit_cdclk =
15294 bxt_modeset_commit_cdclk;
15295 dev_priv->display.modeset_calc_cdclk =
15296 bxt_modeset_calc_cdclk;
15297 } else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
15298 dev_priv->display.modeset_commit_cdclk =
15299 skl_modeset_commit_cdclk;
15300 dev_priv->display.modeset_calc_cdclk =
15301 skl_modeset_calc_cdclk;
15304 switch (INTEL_INFO(dev_priv)->gen) {
15306 dev_priv->display.queue_flip = intel_gen2_queue_flip;
15310 dev_priv->display.queue_flip = intel_gen3_queue_flip;
15315 dev_priv->display.queue_flip = intel_gen4_queue_flip;
15319 dev_priv->display.queue_flip = intel_gen6_queue_flip;
15322 case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
15323 dev_priv->display.queue_flip = intel_gen7_queue_flip;
15326 /* Drop through - unsupported since execlist only. */
15328 /* Default just returns -ENODEV to indicate unsupported */
15329 dev_priv->display.queue_flip = intel_default_queue_flip;
15334 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
15335 * resume, or other times. This quirk makes sure that's the case for
15336 * affected systems.
15338 static void quirk_pipea_force(struct drm_device *dev)
15340 struct drm_i915_private *dev_priv = dev->dev_private;
15342 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
15343 DRM_INFO("applying pipe a force quirk\n");
15346 static void quirk_pipeb_force(struct drm_device *dev)
15348 struct drm_i915_private *dev_priv = dev->dev_private;
15350 dev_priv->quirks |= QUIRK_PIPEB_FORCE;
15351 DRM_INFO("applying pipe b force quirk\n");
15355 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
15357 static void quirk_ssc_force_disable(struct drm_device *dev)
15359 struct drm_i915_private *dev_priv = dev->dev_private;
15360 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
15361 DRM_INFO("applying lvds SSC disable quirk\n");
15365 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
15368 static void quirk_invert_brightness(struct drm_device *dev)
15370 struct drm_i915_private *dev_priv = dev->dev_private;
15371 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
15372 DRM_INFO("applying inverted panel brightness quirk\n");
15375 /* Some VBT's incorrectly indicate no backlight is present */
15376 static void quirk_backlight_present(struct drm_device *dev)
15378 struct drm_i915_private *dev_priv = dev->dev_private;
15379 dev_priv->quirks |= QUIRK_BACKLIGHT_PRESENT;
15380 DRM_INFO("applying backlight present quirk\n");
15383 struct intel_quirk {
15385 int subsystem_vendor;
15386 int subsystem_device;
15387 void (*hook)(struct drm_device *dev);
15390 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
15391 struct intel_dmi_quirk {
15392 void (*hook)(struct drm_device *dev);
15393 const struct dmi_system_id (*dmi_id_list)[];
15396 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
15398 DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
15402 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
15404 .dmi_id_list = &(const struct dmi_system_id[]) {
15406 .callback = intel_dmi_reverse_brightness,
15407 .ident = "NCR Corporation",
15408 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
15409 DMI_MATCH(DMI_PRODUCT_NAME, ""),
15412 { } /* terminating entry */
15414 .hook = quirk_invert_brightness,
15418 static struct intel_quirk intel_quirks[] = {
15419 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
15420 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
15422 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
15423 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
15425 /* 830 needs to leave pipe A & dpll A up */
15426 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
15428 /* 830 needs to leave pipe B & dpll B up */
15429 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipeb_force },
15431 /* Lenovo U160 cannot use SSC on LVDS */
15432 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
15434 /* Sony Vaio Y cannot use SSC on LVDS */
15435 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
15437 /* Acer Aspire 5734Z must invert backlight brightness */
15438 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
15440 /* Acer/eMachines G725 */
15441 { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
15443 /* Acer/eMachines e725 */
15444 { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
15446 /* Acer/Packard Bell NCL20 */
15447 { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
15449 /* Acer Aspire 4736Z */
15450 { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
15452 /* Acer Aspire 5336 */
15453 { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness },
15455 /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */
15456 { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present },
15458 /* Acer C720 Chromebook (Core i3 4005U) */
15459 { 0x0a16, 0x1025, 0x0a11, quirk_backlight_present },
15461 /* Apple Macbook 2,1 (Core 2 T7400) */
15462 { 0x27a2, 0x8086, 0x7270, quirk_backlight_present },
15464 /* Apple Macbook 4,1 */
15465 { 0x2a02, 0x106b, 0x00a1, quirk_backlight_present },
15467 /* Toshiba CB35 Chromebook (Celeron 2955U) */
15468 { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
15470 /* HP Chromebook 14 (Celeron 2955U) */
15471 { 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
15473 /* Dell Chromebook 11 */
15474 { 0x0a06, 0x1028, 0x0a35, quirk_backlight_present },
15476 /* Dell Chromebook 11 (2015 version) */
15477 { 0x0a16, 0x1028, 0x0a35, quirk_backlight_present },
15480 static void intel_init_quirks(struct drm_device *dev)
15482 struct pci_dev *d = dev->pdev;
15485 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
15486 struct intel_quirk *q = &intel_quirks[i];
15488 if (d->device == q->device &&
15489 (d->subsystem_vendor == q->subsystem_vendor ||
15490 q->subsystem_vendor == PCI_ANY_ID) &&
15491 (d->subsystem_device == q->subsystem_device ||
15492 q->subsystem_device == PCI_ANY_ID))
15495 for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
15496 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
15497 intel_dmi_quirks[i].hook(dev);
15501 /* Disable the VGA plane that we never use */
15502 static void i915_disable_vga(struct drm_device *dev)
15504 struct drm_i915_private *dev_priv = dev->dev_private;
15506 i915_reg_t vga_reg = i915_vgacntrl_reg(dev);
15508 /* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
15509 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
15510 outb(SR01, VGA_SR_INDEX);
15511 sr1 = inb(VGA_SR_DATA);
15512 outb(sr1 | 1<<5, VGA_SR_DATA);
15513 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
15516 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
15517 POSTING_READ(vga_reg);
15520 void intel_modeset_init_hw(struct drm_device *dev)
15522 struct drm_i915_private *dev_priv = dev->dev_private;
15524 intel_update_cdclk(dev);
15526 dev_priv->atomic_cdclk_freq = dev_priv->cdclk_freq;
15528 intel_init_clock_gating(dev);
15529 intel_enable_gt_powersave(dev_priv);
15533 * Calculate what we think the watermarks should be for the state we've read
15534 * out of the hardware and then immediately program those watermarks so that
15535 * we ensure the hardware settings match our internal state.
15537 * We can calculate what we think WM's should be by creating a duplicate of the
15538 * current state (which was constructed during hardware readout) and running it
15539 * through the atomic check code to calculate new watermark values in the
15542 static void sanitize_watermarks(struct drm_device *dev)
15544 struct drm_i915_private *dev_priv = to_i915(dev);
15545 struct drm_atomic_state *state;
15546 struct drm_crtc *crtc;
15547 struct drm_crtc_state *cstate;
15548 struct drm_modeset_acquire_ctx ctx;
15552 /* Only supported on platforms that use atomic watermark design */
15553 if (!dev_priv->display.optimize_watermarks)
15557 * We need to hold connection_mutex before calling duplicate_state so
15558 * that the connector loop is protected.
15560 drm_modeset_acquire_init(&ctx, 0);
15562 ret = drm_modeset_lock_all_ctx(dev, &ctx);
15563 if (ret == -EDEADLK) {
15564 drm_modeset_backoff(&ctx);
15566 } else if (WARN_ON(ret)) {
15570 state = drm_atomic_helper_duplicate_state(dev, &ctx);
15571 if (WARN_ON(IS_ERR(state)))
15575 * Hardware readout is the only time we don't want to calculate
15576 * intermediate watermarks (since we don't trust the current
15579 to_intel_atomic_state(state)->skip_intermediate_wm = true;
15581 ret = intel_atomic_check(dev, state);
15584 * If we fail here, it means that the hardware appears to be
15585 * programmed in a way that shouldn't be possible, given our
15586 * understanding of watermark requirements. This might mean a
15587 * mistake in the hardware readout code or a mistake in the
15588 * watermark calculations for a given platform. Raise a WARN
15589 * so that this is noticeable.
15591 * If this actually happens, we'll have to just leave the
15592 * BIOS-programmed watermarks untouched and hope for the best.
15594 WARN(true, "Could not determine valid watermarks for inherited state\n");
15598 /* Write calculated watermark values back */
15599 for_each_crtc_in_state(state, crtc, cstate, i) {
15600 struct intel_crtc_state *cs = to_intel_crtc_state(cstate);
15602 cs->wm.need_postvbl_update = true;
15603 dev_priv->display.optimize_watermarks(cs);
15606 drm_atomic_state_free(state);
15608 drm_modeset_drop_locks(&ctx);
15609 drm_modeset_acquire_fini(&ctx);
15612 void intel_modeset_init(struct drm_device *dev)
15614 struct drm_i915_private *dev_priv = to_i915(dev);
15615 struct i915_ggtt *ggtt = &dev_priv->ggtt;
15618 struct intel_crtc *crtc;
15620 drm_mode_config_init(dev);
15622 dev->mode_config.min_width = 0;
15623 dev->mode_config.min_height = 0;
15625 dev->mode_config.preferred_depth = 24;
15626 dev->mode_config.prefer_shadow = 1;
15628 dev->mode_config.allow_fb_modifiers = true;
15630 dev->mode_config.funcs = &intel_mode_funcs;
15632 intel_init_quirks(dev);
15634 intel_init_pm(dev);
15636 if (INTEL_INFO(dev)->num_pipes == 0)
15640 * There may be no VBT; and if the BIOS enabled SSC we can
15641 * just keep using it to avoid unnecessary flicker. Whereas if the
15642 * BIOS isn't using it, don't assume it will work even if the VBT
15643 * indicates as much.
15645 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
15646 bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
15649 if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
15650 DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n",
15651 bios_lvds_use_ssc ? "en" : "dis",
15652 dev_priv->vbt.lvds_use_ssc ? "en" : "dis");
15653 dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
15657 if (IS_GEN2(dev)) {
15658 dev->mode_config.max_width = 2048;
15659 dev->mode_config.max_height = 2048;
15660 } else if (IS_GEN3(dev)) {
15661 dev->mode_config.max_width = 4096;
15662 dev->mode_config.max_height = 4096;
15664 dev->mode_config.max_width = 8192;
15665 dev->mode_config.max_height = 8192;
15668 if (IS_845G(dev) || IS_I865G(dev)) {
15669 dev->mode_config.cursor_width = IS_845G(dev) ? 64 : 512;
15670 dev->mode_config.cursor_height = 1023;
15671 } else if (IS_GEN2(dev)) {
15672 dev->mode_config.cursor_width = GEN2_CURSOR_WIDTH;
15673 dev->mode_config.cursor_height = GEN2_CURSOR_HEIGHT;
15675 dev->mode_config.cursor_width = MAX_CURSOR_WIDTH;
15676 dev->mode_config.cursor_height = MAX_CURSOR_HEIGHT;
15679 dev->mode_config.fb_base = ggtt->mappable_base;
15681 DRM_DEBUG_KMS("%d display pipe%s available.\n",
15682 INTEL_INFO(dev)->num_pipes,
15683 INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
15685 for_each_pipe(dev_priv, pipe) {
15686 intel_crtc_init(dev, pipe);
15687 for_each_sprite(dev_priv, pipe, sprite) {
15688 ret = intel_plane_init(dev, pipe, sprite);
15690 DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
15691 pipe_name(pipe), sprite_name(pipe, sprite), ret);
15695 intel_update_czclk(dev_priv);
15696 intel_update_cdclk(dev);
15698 intel_shared_dpll_init(dev);
15700 if (dev_priv->max_cdclk_freq == 0)
15701 intel_update_max_cdclk(dev);
15703 /* Just disable it once at startup */
15704 i915_disable_vga(dev);
15705 intel_setup_outputs(dev);
15707 drm_modeset_lock_all(dev);
15708 intel_modeset_setup_hw_state(dev);
15709 drm_modeset_unlock_all(dev);
15711 for_each_intel_crtc(dev, crtc) {
15712 struct intel_initial_plane_config plane_config = {};
15718 * Note that reserving the BIOS fb up front prevents us
15719 * from stuffing other stolen allocations like the ring
15720 * on top. This prevents some ugliness at boot time, and
15721 * can even allow for smooth boot transitions if the BIOS
15722 * fb is large enough for the active pipe configuration.
15724 dev_priv->display.get_initial_plane_config(crtc,
15728 * If the fb is shared between multiple heads, we'll
15729 * just get the first one.
15731 intel_find_initial_plane_obj(crtc, &plane_config);
15735 * Make sure hardware watermarks really match the state we read out.
15736 * Note that we need to do this after reconstructing the BIOS fb's
15737 * since the watermark calculation done here will use pstate->fb.
15739 sanitize_watermarks(dev);
15742 static void intel_enable_pipe_a(struct drm_device *dev)
15744 struct intel_connector *connector;
15745 struct drm_connector *crt = NULL;
15746 struct intel_load_detect_pipe load_detect_temp;
15747 struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
15749 /* We can't just switch on the pipe A, we need to set things up with a
15750 * proper mode and output configuration. As a gross hack, enable pipe A
15751 * by enabling the load detect pipe once. */
15752 for_each_intel_connector(dev, connector) {
15753 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
15754 crt = &connector->base;
15762 if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, ctx))
15763 intel_release_load_detect_pipe(crt, &load_detect_temp, ctx);
15767 intel_check_plane_mapping(struct intel_crtc *crtc)
15769 struct drm_device *dev = crtc->base.dev;
15770 struct drm_i915_private *dev_priv = dev->dev_private;
15773 if (INTEL_INFO(dev)->num_pipes == 1)
15776 val = I915_READ(DSPCNTR(!crtc->plane));
15778 if ((val & DISPLAY_PLANE_ENABLE) &&
15779 (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
15785 static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
15787 struct drm_device *dev = crtc->base.dev;
15788 struct intel_encoder *encoder;
15790 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
15796 static bool intel_encoder_has_connectors(struct intel_encoder *encoder)
15798 struct drm_device *dev = encoder->base.dev;
15799 struct intel_connector *connector;
15801 for_each_connector_on_encoder(dev, &encoder->base, connector)
15807 static void intel_sanitize_crtc(struct intel_crtc *crtc)
15809 struct drm_device *dev = crtc->base.dev;
15810 struct drm_i915_private *dev_priv = dev->dev_private;
15811 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
15813 /* Clear any frame start delays used for debugging left by the BIOS */
15814 if (!transcoder_is_dsi(cpu_transcoder)) {
15815 i915_reg_t reg = PIPECONF(cpu_transcoder);
15818 I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
15821 /* restore vblank interrupts to correct state */
15822 drm_crtc_vblank_reset(&crtc->base);
15823 if (crtc->active) {
15824 struct intel_plane *plane;
15826 drm_crtc_vblank_on(&crtc->base);
15828 /* Disable everything but the primary plane */
15829 for_each_intel_plane_on_crtc(dev, crtc, plane) {
15830 if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
15833 plane->disable_plane(&plane->base, &crtc->base);
15837 /* We need to sanitize the plane -> pipe mapping first because this will
15838 * disable the crtc (and hence change the state) if it is wrong. Note
15839 * that gen4+ has a fixed plane -> pipe mapping. */
15840 if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
15843 DRM_DEBUG_KMS("[CRTC:%d:%s] wrong plane connection detected!\n",
15844 crtc->base.base.id, crtc->base.name);
15846 /* Pipe has the wrong plane attached and the plane is active.
15847 * Temporarily change the plane mapping and disable everything
15849 plane = crtc->plane;
15850 to_intel_plane_state(crtc->base.primary->state)->visible = true;
15851 crtc->plane = !plane;
15852 intel_crtc_disable_noatomic(&crtc->base);
15853 crtc->plane = plane;
15856 if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
15857 crtc->pipe == PIPE_A && !crtc->active) {
15858 /* BIOS forgot to enable pipe A, this mostly happens after
15859 * resume. Force-enable the pipe to fix this, the update_dpms
15860 * call below we restore the pipe to the right state, but leave
15861 * the required bits on. */
15862 intel_enable_pipe_a(dev);
15865 /* Adjust the state of the output pipe according to whether we
15866 * have active connectors/encoders. */
15867 if (crtc->active && !intel_crtc_has_encoders(crtc))
15868 intel_crtc_disable_noatomic(&crtc->base);
15870 if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
15872 * We start out with underrun reporting disabled to avoid races.
15873 * For correct bookkeeping mark this on active crtcs.
15875 * Also on gmch platforms we dont have any hardware bits to
15876 * disable the underrun reporting. Which means we need to start
15877 * out with underrun reporting disabled also on inactive pipes,
15878 * since otherwise we'll complain about the garbage we read when
15879 * e.g. coming up after runtime pm.
15881 * No protection against concurrent access is required - at
15882 * worst a fifo underrun happens which also sets this to false.
15884 crtc->cpu_fifo_underrun_disabled = true;
15885 crtc->pch_fifo_underrun_disabled = true;
15889 static void intel_sanitize_encoder(struct intel_encoder *encoder)
15891 struct intel_connector *connector;
15892 struct drm_device *dev = encoder->base.dev;
15894 /* We need to check both for a crtc link (meaning that the
15895 * encoder is active and trying to read from a pipe) and the
15896 * pipe itself being active. */
15897 bool has_active_crtc = encoder->base.crtc &&
15898 to_intel_crtc(encoder->base.crtc)->active;
15900 if (intel_encoder_has_connectors(encoder) && !has_active_crtc) {
15901 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
15902 encoder->base.base.id,
15903 encoder->base.name);
15905 /* Connector is active, but has no active pipe. This is
15906 * fallout from our resume register restoring. Disable
15907 * the encoder manually again. */
15908 if (encoder->base.crtc) {
15909 DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
15910 encoder->base.base.id,
15911 encoder->base.name);
15912 encoder->disable(encoder);
15913 if (encoder->post_disable)
15914 encoder->post_disable(encoder);
15916 encoder->base.crtc = NULL;
15918 /* Inconsistent output/port/pipe state happens presumably due to
15919 * a bug in one of the get_hw_state functions. Or someplace else
15920 * in our code, like the register restore mess on resume. Clamp
15921 * things to off as a safer default. */
15922 for_each_intel_connector(dev, connector) {
15923 if (connector->encoder != encoder)
15925 connector->base.dpms = DRM_MODE_DPMS_OFF;
15926 connector->base.encoder = NULL;
15929 /* Enabled encoders without active connectors will be fixed in
15930 * the crtc fixup. */
15933 void i915_redisable_vga_power_on(struct drm_device *dev)
15935 struct drm_i915_private *dev_priv = dev->dev_private;
15936 i915_reg_t vga_reg = i915_vgacntrl_reg(dev);
15938 if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) {
15939 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
15940 i915_disable_vga(dev);
15944 void i915_redisable_vga(struct drm_device *dev)
15946 struct drm_i915_private *dev_priv = dev->dev_private;
15948 /* This function can be called both from intel_modeset_setup_hw_state or
15949 * at a very early point in our resume sequence, where the power well
15950 * structures are not yet restored. Since this function is at a very
15951 * paranoid "someone might have enabled VGA while we were not looking"
15952 * level, just check if the power well is enabled instead of trying to
15953 * follow the "don't touch the power well if we don't need it" policy
15954 * the rest of the driver uses. */
15955 if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_VGA))
15958 i915_redisable_vga_power_on(dev);
15960 intel_display_power_put(dev_priv, POWER_DOMAIN_VGA);
15963 static bool primary_get_hw_state(struct intel_plane *plane)
15965 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
15967 return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
15970 /* FIXME read out full plane state for all planes */
15971 static void readout_plane_state(struct intel_crtc *crtc)
15973 struct drm_plane *primary = crtc->base.primary;
15974 struct intel_plane_state *plane_state =
15975 to_intel_plane_state(primary->state);
15977 plane_state->visible = crtc->active &&
15978 primary_get_hw_state(to_intel_plane(primary));
15980 if (plane_state->visible)
15981 crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
15984 static void intel_modeset_readout_hw_state(struct drm_device *dev)
15986 struct drm_i915_private *dev_priv = dev->dev_private;
15988 struct intel_crtc *crtc;
15989 struct intel_encoder *encoder;
15990 struct intel_connector *connector;
15993 dev_priv->active_crtcs = 0;
15995 for_each_intel_crtc(dev, crtc) {
15996 struct intel_crtc_state *crtc_state = crtc->config;
15999 __drm_atomic_helper_crtc_destroy_state(&crtc_state->base);
16000 memset(crtc_state, 0, sizeof(*crtc_state));
16001 crtc_state->base.crtc = &crtc->base;
16003 crtc_state->base.active = crtc_state->base.enable =
16004 dev_priv->display.get_pipe_config(crtc, crtc_state);
16006 crtc->base.enabled = crtc_state->base.enable;
16007 crtc->active = crtc_state->base.active;
16009 if (crtc_state->base.active) {
16010 dev_priv->active_crtcs |= 1 << crtc->pipe;
16012 if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
16013 pixclk = ilk_pipe_pixel_rate(crtc_state);
16014 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
16015 pixclk = crtc_state->base.adjusted_mode.crtc_clock;
16017 WARN_ON(dev_priv->display.modeset_calc_cdclk);
16019 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
16020 if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled)
16021 pixclk = DIV_ROUND_UP(pixclk * 100, 95);
16024 dev_priv->min_pixclk[crtc->pipe] = pixclk;
16026 readout_plane_state(crtc);
16028 DRM_DEBUG_KMS("[CRTC:%d:%s] hw state readout: %s\n",
16029 crtc->base.base.id, crtc->base.name,
16030 crtc->active ? "enabled" : "disabled");
16033 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
16034 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
16036 pll->on = pll->funcs.get_hw_state(dev_priv, pll,
16037 &pll->config.hw_state);
16038 pll->config.crtc_mask = 0;
16039 for_each_intel_crtc(dev, crtc) {
16040 if (crtc->active && crtc->config->shared_dpll == pll)
16041 pll->config.crtc_mask |= 1 << crtc->pipe;
16043 pll->active_mask = pll->config.crtc_mask;
16045 DRM_DEBUG_KMS("%s hw state readout: crtc_mask 0x%08x, on %i\n",
16046 pll->name, pll->config.crtc_mask, pll->on);
16049 for_each_intel_encoder(dev, encoder) {
16052 if (encoder->get_hw_state(encoder, &pipe)) {
16053 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
16054 encoder->base.crtc = &crtc->base;
16055 encoder->get_config(encoder, crtc->config);
16057 encoder->base.crtc = NULL;
16060 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
16061 encoder->base.base.id,
16062 encoder->base.name,
16063 encoder->base.crtc ? "enabled" : "disabled",
16067 for_each_intel_connector(dev, connector) {
16068 if (connector->get_hw_state(connector)) {
16069 connector->base.dpms = DRM_MODE_DPMS_ON;
16071 encoder = connector->encoder;
16072 connector->base.encoder = &encoder->base;
16074 if (encoder->base.crtc &&
16075 encoder->base.crtc->state->active) {
16077 * This has to be done during hardware readout
16078 * because anything calling .crtc_disable may
16079 * rely on the connector_mask being accurate.
16081 encoder->base.crtc->state->connector_mask |=
16082 1 << drm_connector_index(&connector->base);
16083 encoder->base.crtc->state->encoder_mask |=
16084 1 << drm_encoder_index(&encoder->base);
16088 connector->base.dpms = DRM_MODE_DPMS_OFF;
16089 connector->base.encoder = NULL;
16091 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
16092 connector->base.base.id,
16093 connector->base.name,
16094 connector->base.encoder ? "enabled" : "disabled");
16097 for_each_intel_crtc(dev, crtc) {
16098 crtc->base.hwmode = crtc->config->base.adjusted_mode;
16100 memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
16101 if (crtc->base.state->active) {
16102 intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
16103 intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
16104 WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
16107 * The initial mode needs to be set in order to keep
16108 * the atomic core happy. It wants a valid mode if the
16109 * crtc's enabled, so we do the above call.
16111 * At this point some state updated by the connectors
16112 * in their ->detect() callback has not run yet, so
16113 * no recalculation can be done yet.
16115 * Even if we could do a recalculation and modeset
16116 * right now it would cause a double modeset if
16117 * fbdev or userspace chooses a different initial mode.
16119 * If that happens, someone indicated they wanted a
16120 * mode change, which means it's safe to do a full
16123 crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
16125 drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
16126 update_scanline_offset(crtc);
16129 intel_pipe_config_sanity_check(dev_priv, crtc->config);
16133 /* Scan out the current hw modeset state,
16134 * and sanitizes it to the current state
16137 intel_modeset_setup_hw_state(struct drm_device *dev)
16139 struct drm_i915_private *dev_priv = dev->dev_private;
16141 struct intel_crtc *crtc;
16142 struct intel_encoder *encoder;
16145 intel_modeset_readout_hw_state(dev);
16147 /* HW state is read out, now we need to sanitize this mess. */
16148 for_each_intel_encoder(dev, encoder) {
16149 intel_sanitize_encoder(encoder);
16152 for_each_pipe(dev_priv, pipe) {
16153 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
16154 intel_sanitize_crtc(crtc);
16155 intel_dump_pipe_config(crtc, crtc->config,
16156 "[setup_hw_state]");
16159 intel_modeset_update_connector_atomic_state(dev);
16161 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
16162 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
16164 if (!pll->on || pll->active_mask)
16167 DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
16169 pll->funcs.disable(dev_priv, pll);
16173 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
16174 vlv_wm_get_hw_state(dev);
16175 else if (IS_GEN9(dev))
16176 skl_wm_get_hw_state(dev);
16177 else if (HAS_PCH_SPLIT(dev))
16178 ilk_wm_get_hw_state(dev);
16180 for_each_intel_crtc(dev, crtc) {
16181 unsigned long put_domains;
16183 put_domains = modeset_get_crtc_power_domains(&crtc->base, crtc->config);
16184 if (WARN_ON(put_domains))
16185 modeset_put_power_domains(dev_priv, put_domains);
16187 intel_display_set_init_power(dev_priv, false);
16189 intel_fbc_init_pipe_state(dev_priv);
16192 void intel_display_resume(struct drm_device *dev)
16194 struct drm_i915_private *dev_priv = to_i915(dev);
16195 struct drm_atomic_state *state = dev_priv->modeset_restore_state;
16196 struct drm_modeset_acquire_ctx ctx;
16198 bool setup = false;
16200 dev_priv->modeset_restore_state = NULL;
16203 * This is a cludge because with real atomic modeset mode_config.mutex
16204 * won't be taken. Unfortunately some probed state like
16205 * audio_codec_enable is still protected by mode_config.mutex, so lock
16208 mutex_lock(&dev->mode_config.mutex);
16209 drm_modeset_acquire_init(&ctx, 0);
16212 ret = drm_modeset_lock_all_ctx(dev, &ctx);
16214 if (ret == 0 && !setup) {
16217 intel_modeset_setup_hw_state(dev);
16218 i915_redisable_vga(dev);
16221 if (ret == 0 && state) {
16222 struct drm_crtc_state *crtc_state;
16223 struct drm_crtc *crtc;
16226 state->acquire_ctx = &ctx;
16228 /* ignore any reset values/BIOS leftovers in the WM registers */
16229 to_intel_atomic_state(state)->skip_intermediate_wm = true;
16231 for_each_crtc_in_state(state, crtc, crtc_state, i) {
16233 * Force recalculation even if we restore
16234 * current state. With fast modeset this may not result
16235 * in a modeset when the state is compatible.
16237 crtc_state->mode_changed = true;
16240 ret = drm_atomic_commit(state);
16243 if (ret == -EDEADLK) {
16244 drm_modeset_backoff(&ctx);
16248 drm_modeset_drop_locks(&ctx);
16249 drm_modeset_acquire_fini(&ctx);
16250 mutex_unlock(&dev->mode_config.mutex);
16253 DRM_ERROR("Restoring old state failed with %i\n", ret);
16254 drm_atomic_state_free(state);
16258 void intel_modeset_gem_init(struct drm_device *dev)
16260 struct drm_i915_private *dev_priv = to_i915(dev);
16261 struct drm_crtc *c;
16262 struct drm_i915_gem_object *obj;
16265 intel_init_gt_powersave(dev_priv);
16267 intel_modeset_init_hw(dev);
16269 intel_setup_overlay(dev_priv);
16272 * Make sure any fbs we allocated at startup are properly
16273 * pinned & fenced. When we do the allocation it's too early
16276 for_each_crtc(dev, c) {
16277 obj = intel_fb_obj(c->primary->fb);
16281 mutex_lock(&dev->struct_mutex);
16282 ret = intel_pin_and_fence_fb_obj(c->primary->fb,
16283 c->primary->state->rotation);
16284 mutex_unlock(&dev->struct_mutex);
16286 DRM_ERROR("failed to pin boot fb on pipe %d\n",
16287 to_intel_crtc(c)->pipe);
16288 drm_framebuffer_unreference(c->primary->fb);
16289 c->primary->fb = NULL;
16290 c->primary->crtc = c->primary->state->crtc = NULL;
16291 update_state_fb(c->primary);
16292 c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
16296 intel_backlight_register(dev);
16299 void intel_connector_unregister(struct intel_connector *intel_connector)
16301 struct drm_connector *connector = &intel_connector->base;
16303 intel_panel_destroy_backlight(connector);
16304 drm_connector_unregister(connector);
16307 void intel_modeset_cleanup(struct drm_device *dev)
16309 struct drm_i915_private *dev_priv = dev->dev_private;
16310 struct intel_connector *connector;
16312 intel_disable_gt_powersave(dev_priv);
16314 intel_backlight_unregister(dev);
16317 * Interrupts and polling as the first thing to avoid creating havoc.
16318 * Too much stuff here (turning of connectors, ...) would
16319 * experience fancy races otherwise.
16321 intel_irq_uninstall(dev_priv);
16324 * Due to the hpd irq storm handling the hotplug work can re-arm the
16325 * poll handlers. Hence disable polling after hpd handling is shut down.
16327 drm_kms_helper_poll_fini(dev);
16329 intel_unregister_dsm_handler();
16331 intel_fbc_global_disable(dev_priv);
16333 /* flush any delayed tasks or pending work */
16334 flush_scheduled_work();
16336 /* destroy the backlight and sysfs files before encoders/connectors */
16337 for_each_intel_connector(dev, connector)
16338 connector->unregister(connector);
16340 drm_mode_config_cleanup(dev);
16342 intel_cleanup_overlay(dev_priv);
16344 intel_cleanup_gt_powersave(dev_priv);
16346 intel_teardown_gmbus(dev);
16349 void intel_connector_attach_encoder(struct intel_connector *connector,
16350 struct intel_encoder *encoder)
16352 connector->encoder = encoder;
16353 drm_mode_connector_attach_encoder(&connector->base,
16358 * set vga decode state - true == enable VGA decode
16360 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
16362 struct drm_i915_private *dev_priv = dev->dev_private;
16363 unsigned reg = INTEL_INFO(dev)->gen >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL;
16366 if (pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl)) {
16367 DRM_ERROR("failed to read control word\n");
16371 if (!!(gmch_ctrl & INTEL_GMCH_VGA_DISABLE) == !state)
16375 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
16377 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
16379 if (pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl)) {
16380 DRM_ERROR("failed to write control word\n");
16387 struct intel_display_error_state {
16389 u32 power_well_driver;
16391 int num_transcoders;
16393 struct intel_cursor_error_state {
16398 } cursor[I915_MAX_PIPES];
16400 struct intel_pipe_error_state {
16401 bool power_domain_on;
16404 } pipe[I915_MAX_PIPES];
16406 struct intel_plane_error_state {
16414 } plane[I915_MAX_PIPES];
16416 struct intel_transcoder_error_state {
16417 bool power_domain_on;
16418 enum transcoder cpu_transcoder;
16431 struct intel_display_error_state *
16432 intel_display_capture_error_state(struct drm_i915_private *dev_priv)
16434 struct intel_display_error_state *error;
16435 int transcoders[] = {
16443 if (INTEL_INFO(dev_priv)->num_pipes == 0)
16446 error = kzalloc(sizeof(*error), GFP_ATOMIC);
16450 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
16451 error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
16453 for_each_pipe(dev_priv, i) {
16454 error->pipe[i].power_domain_on =
16455 __intel_display_power_is_enabled(dev_priv,
16456 POWER_DOMAIN_PIPE(i));
16457 if (!error->pipe[i].power_domain_on)
16460 error->cursor[i].control = I915_READ(CURCNTR(i));
16461 error->cursor[i].position = I915_READ(CURPOS(i));
16462 error->cursor[i].base = I915_READ(CURBASE(i));
16464 error->plane[i].control = I915_READ(DSPCNTR(i));
16465 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
16466 if (INTEL_GEN(dev_priv) <= 3) {
16467 error->plane[i].size = I915_READ(DSPSIZE(i));
16468 error->plane[i].pos = I915_READ(DSPPOS(i));
16470 if (INTEL_GEN(dev_priv) <= 7 && !IS_HASWELL(dev_priv))
16471 error->plane[i].addr = I915_READ(DSPADDR(i));
16472 if (INTEL_GEN(dev_priv) >= 4) {
16473 error->plane[i].surface = I915_READ(DSPSURF(i));
16474 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
16477 error->pipe[i].source = I915_READ(PIPESRC(i));
16479 if (HAS_GMCH_DISPLAY(dev_priv))
16480 error->pipe[i].stat = I915_READ(PIPESTAT(i));
16483 /* Note: this does not include DSI transcoders. */
16484 error->num_transcoders = INTEL_INFO(dev_priv)->num_pipes;
16485 if (HAS_DDI(dev_priv))
16486 error->num_transcoders++; /* Account for eDP. */
16488 for (i = 0; i < error->num_transcoders; i++) {
16489 enum transcoder cpu_transcoder = transcoders[i];
16491 error->transcoder[i].power_domain_on =
16492 __intel_display_power_is_enabled(dev_priv,
16493 POWER_DOMAIN_TRANSCODER(cpu_transcoder));
16494 if (!error->transcoder[i].power_domain_on)
16497 error->transcoder[i].cpu_transcoder = cpu_transcoder;
16499 error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
16500 error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
16501 error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
16502 error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
16503 error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
16504 error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
16505 error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
16511 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
16514 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
16515 struct drm_device *dev,
16516 struct intel_display_error_state *error)
16518 struct drm_i915_private *dev_priv = dev->dev_private;
16524 err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
16525 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
16526 err_printf(m, "PWR_WELL_CTL2: %08x\n",
16527 error->power_well_driver);
16528 for_each_pipe(dev_priv, i) {
16529 err_printf(m, "Pipe [%d]:\n", i);
16530 err_printf(m, " Power: %s\n",
16531 onoff(error->pipe[i].power_domain_on));
16532 err_printf(m, " SRC: %08x\n", error->pipe[i].source);
16533 err_printf(m, " STAT: %08x\n", error->pipe[i].stat);
16535 err_printf(m, "Plane [%d]:\n", i);
16536 err_printf(m, " CNTR: %08x\n", error->plane[i].control);
16537 err_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
16538 if (INTEL_INFO(dev)->gen <= 3) {
16539 err_printf(m, " SIZE: %08x\n", error->plane[i].size);
16540 err_printf(m, " POS: %08x\n", error->plane[i].pos);
16542 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
16543 err_printf(m, " ADDR: %08x\n", error->plane[i].addr);
16544 if (INTEL_INFO(dev)->gen >= 4) {
16545 err_printf(m, " SURF: %08x\n", error->plane[i].surface);
16546 err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
16549 err_printf(m, "Cursor [%d]:\n", i);
16550 err_printf(m, " CNTR: %08x\n", error->cursor[i].control);
16551 err_printf(m, " POS: %08x\n", error->cursor[i].position);
16552 err_printf(m, " BASE: %08x\n", error->cursor[i].base);
16555 for (i = 0; i < error->num_transcoders; i++) {
16556 err_printf(m, "CPU transcoder: %s\n",
16557 transcoder_name(error->transcoder[i].cpu_transcoder));
16558 err_printf(m, " Power: %s\n",
16559 onoff(error->transcoder[i].power_domain_on));
16560 err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
16561 err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
16562 err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
16563 err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
16564 err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
16565 err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
16566 err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);