2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/dmi.h>
28 #include <linux/module.h>
29 #include <linux/input.h>
30 #include <linux/i2c.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/vgaarb.h>
34 #include <drm/drm_edid.h>
36 #include "intel_drv.h"
37 #include <drm/i915_drm.h>
39 #include "i915_trace.h"
40 #include <drm/drm_dp_helper.h>
41 #include <drm/drm_crtc_helper.h>
42 #include <linux/dma_remapping.h>
44 bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
45 static void intel_increase_pllclock(struct drm_crtc *crtc);
46 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
69 #define INTEL_P2_NUM 2
70 typedef struct intel_limit intel_limit_t;
72 intel_range_t dot, vco, n, m, m1, m2, p, p1;
75 * find_pll() - Find the best values for the PLL
76 * @limit: limits for the PLL
78 * @target: target frequency in kHz
79 * @refclk: reference clock frequency in kHz
80 * @match_clock: if provided, @best_clock P divider must
81 * match the P divider from @match_clock
82 * used for LVDS downclocking
83 * @best_clock: best PLL values found
85 * Returns true on success, false on failure.
87 bool (*find_pll)(const intel_limit_t *limit,
88 struct drm_crtc *crtc,
89 int target, int refclk,
90 intel_clock_t *match_clock,
91 intel_clock_t *best_clock);
95 #define IRONLAKE_FDI_FREQ 2700000 /* in kHz for mode->clock */
98 intel_pch_rawclk(struct drm_device *dev)
100 struct drm_i915_private *dev_priv = dev->dev_private;
102 WARN_ON(!HAS_PCH_SPLIT(dev));
104 return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
108 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
109 int target, int refclk, intel_clock_t *match_clock,
110 intel_clock_t *best_clock);
112 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
113 int target, int refclk, intel_clock_t *match_clock,
114 intel_clock_t *best_clock);
117 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
118 int target, int refclk, intel_clock_t *match_clock,
119 intel_clock_t *best_clock);
121 intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
122 int target, int refclk, intel_clock_t *match_clock,
123 intel_clock_t *best_clock);
126 intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
127 int target, int refclk, intel_clock_t *match_clock,
128 intel_clock_t *best_clock);
130 static inline u32 /* units of 100MHz */
131 intel_fdi_link_freq(struct drm_device *dev)
134 struct drm_i915_private *dev_priv = dev->dev_private;
135 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
140 static const intel_limit_t intel_limits_i8xx_dvo = {
141 .dot = { .min = 25000, .max = 350000 },
142 .vco = { .min = 930000, .max = 1400000 },
143 .n = { .min = 3, .max = 16 },
144 .m = { .min = 96, .max = 140 },
145 .m1 = { .min = 18, .max = 26 },
146 .m2 = { .min = 6, .max = 16 },
147 .p = { .min = 4, .max = 128 },
148 .p1 = { .min = 2, .max = 33 },
149 .p2 = { .dot_limit = 165000,
150 .p2_slow = 4, .p2_fast = 2 },
151 .find_pll = intel_find_best_PLL,
154 static const intel_limit_t intel_limits_i8xx_lvds = {
155 .dot = { .min = 25000, .max = 350000 },
156 .vco = { .min = 930000, .max = 1400000 },
157 .n = { .min = 3, .max = 16 },
158 .m = { .min = 96, .max = 140 },
159 .m1 = { .min = 18, .max = 26 },
160 .m2 = { .min = 6, .max = 16 },
161 .p = { .min = 4, .max = 128 },
162 .p1 = { .min = 1, .max = 6 },
163 .p2 = { .dot_limit = 165000,
164 .p2_slow = 14, .p2_fast = 7 },
165 .find_pll = intel_find_best_PLL,
168 static const intel_limit_t intel_limits_i9xx_sdvo = {
169 .dot = { .min = 20000, .max = 400000 },
170 .vco = { .min = 1400000, .max = 2800000 },
171 .n = { .min = 1, .max = 6 },
172 .m = { .min = 70, .max = 120 },
173 .m1 = { .min = 8, .max = 18 },
174 .m2 = { .min = 3, .max = 7 },
175 .p = { .min = 5, .max = 80 },
176 .p1 = { .min = 1, .max = 8 },
177 .p2 = { .dot_limit = 200000,
178 .p2_slow = 10, .p2_fast = 5 },
179 .find_pll = intel_find_best_PLL,
182 static const intel_limit_t intel_limits_i9xx_lvds = {
183 .dot = { .min = 20000, .max = 400000 },
184 .vco = { .min = 1400000, .max = 2800000 },
185 .n = { .min = 1, .max = 6 },
186 .m = { .min = 70, .max = 120 },
187 .m1 = { .min = 8, .max = 18 },
188 .m2 = { .min = 3, .max = 7 },
189 .p = { .min = 7, .max = 98 },
190 .p1 = { .min = 1, .max = 8 },
191 .p2 = { .dot_limit = 112000,
192 .p2_slow = 14, .p2_fast = 7 },
193 .find_pll = intel_find_best_PLL,
197 static const intel_limit_t intel_limits_g4x_sdvo = {
198 .dot = { .min = 25000, .max = 270000 },
199 .vco = { .min = 1750000, .max = 3500000},
200 .n = { .min = 1, .max = 4 },
201 .m = { .min = 104, .max = 138 },
202 .m1 = { .min = 17, .max = 23 },
203 .m2 = { .min = 5, .max = 11 },
204 .p = { .min = 10, .max = 30 },
205 .p1 = { .min = 1, .max = 3},
206 .p2 = { .dot_limit = 270000,
210 .find_pll = intel_g4x_find_best_PLL,
213 static const intel_limit_t intel_limits_g4x_hdmi = {
214 .dot = { .min = 22000, .max = 400000 },
215 .vco = { .min = 1750000, .max = 3500000},
216 .n = { .min = 1, .max = 4 },
217 .m = { .min = 104, .max = 138 },
218 .m1 = { .min = 16, .max = 23 },
219 .m2 = { .min = 5, .max = 11 },
220 .p = { .min = 5, .max = 80 },
221 .p1 = { .min = 1, .max = 8},
222 .p2 = { .dot_limit = 165000,
223 .p2_slow = 10, .p2_fast = 5 },
224 .find_pll = intel_g4x_find_best_PLL,
227 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
228 .dot = { .min = 20000, .max = 115000 },
229 .vco = { .min = 1750000, .max = 3500000 },
230 .n = { .min = 1, .max = 3 },
231 .m = { .min = 104, .max = 138 },
232 .m1 = { .min = 17, .max = 23 },
233 .m2 = { .min = 5, .max = 11 },
234 .p = { .min = 28, .max = 112 },
235 .p1 = { .min = 2, .max = 8 },
236 .p2 = { .dot_limit = 0,
237 .p2_slow = 14, .p2_fast = 14
239 .find_pll = intel_g4x_find_best_PLL,
242 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
243 .dot = { .min = 80000, .max = 224000 },
244 .vco = { .min = 1750000, .max = 3500000 },
245 .n = { .min = 1, .max = 3 },
246 .m = { .min = 104, .max = 138 },
247 .m1 = { .min = 17, .max = 23 },
248 .m2 = { .min = 5, .max = 11 },
249 .p = { .min = 14, .max = 42 },
250 .p1 = { .min = 2, .max = 6 },
251 .p2 = { .dot_limit = 0,
252 .p2_slow = 7, .p2_fast = 7
254 .find_pll = intel_g4x_find_best_PLL,
257 static const intel_limit_t intel_limits_g4x_display_port = {
258 .dot = { .min = 161670, .max = 227000 },
259 .vco = { .min = 1750000, .max = 3500000},
260 .n = { .min = 1, .max = 2 },
261 .m = { .min = 97, .max = 108 },
262 .m1 = { .min = 0x10, .max = 0x12 },
263 .m2 = { .min = 0x05, .max = 0x06 },
264 .p = { .min = 10, .max = 20 },
265 .p1 = { .min = 1, .max = 2},
266 .p2 = { .dot_limit = 0,
267 .p2_slow = 10, .p2_fast = 10 },
268 .find_pll = intel_find_pll_g4x_dp,
271 static const intel_limit_t intel_limits_pineview_sdvo = {
272 .dot = { .min = 20000, .max = 400000},
273 .vco = { .min = 1700000, .max = 3500000 },
274 /* Pineview's Ncounter is a ring counter */
275 .n = { .min = 3, .max = 6 },
276 .m = { .min = 2, .max = 256 },
277 /* Pineview only has one combined m divider, which we treat as m2. */
278 .m1 = { .min = 0, .max = 0 },
279 .m2 = { .min = 0, .max = 254 },
280 .p = { .min = 5, .max = 80 },
281 .p1 = { .min = 1, .max = 8 },
282 .p2 = { .dot_limit = 200000,
283 .p2_slow = 10, .p2_fast = 5 },
284 .find_pll = intel_find_best_PLL,
287 static const intel_limit_t intel_limits_pineview_lvds = {
288 .dot = { .min = 20000, .max = 400000 },
289 .vco = { .min = 1700000, .max = 3500000 },
290 .n = { .min = 3, .max = 6 },
291 .m = { .min = 2, .max = 256 },
292 .m1 = { .min = 0, .max = 0 },
293 .m2 = { .min = 0, .max = 254 },
294 .p = { .min = 7, .max = 112 },
295 .p1 = { .min = 1, .max = 8 },
296 .p2 = { .dot_limit = 112000,
297 .p2_slow = 14, .p2_fast = 14 },
298 .find_pll = intel_find_best_PLL,
301 /* Ironlake / Sandybridge
303 * We calculate clock using (register_value + 2) for N/M1/M2, so here
304 * the range value for them is (actual_value - 2).
306 static const intel_limit_t intel_limits_ironlake_dac = {
307 .dot = { .min = 25000, .max = 350000 },
308 .vco = { .min = 1760000, .max = 3510000 },
309 .n = { .min = 1, .max = 5 },
310 .m = { .min = 79, .max = 127 },
311 .m1 = { .min = 12, .max = 22 },
312 .m2 = { .min = 5, .max = 9 },
313 .p = { .min = 5, .max = 80 },
314 .p1 = { .min = 1, .max = 8 },
315 .p2 = { .dot_limit = 225000,
316 .p2_slow = 10, .p2_fast = 5 },
317 .find_pll = intel_g4x_find_best_PLL,
320 static const intel_limit_t intel_limits_ironlake_single_lvds = {
321 .dot = { .min = 25000, .max = 350000 },
322 .vco = { .min = 1760000, .max = 3510000 },
323 .n = { .min = 1, .max = 3 },
324 .m = { .min = 79, .max = 118 },
325 .m1 = { .min = 12, .max = 22 },
326 .m2 = { .min = 5, .max = 9 },
327 .p = { .min = 28, .max = 112 },
328 .p1 = { .min = 2, .max = 8 },
329 .p2 = { .dot_limit = 225000,
330 .p2_slow = 14, .p2_fast = 14 },
331 .find_pll = intel_g4x_find_best_PLL,
334 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
335 .dot = { .min = 25000, .max = 350000 },
336 .vco = { .min = 1760000, .max = 3510000 },
337 .n = { .min = 1, .max = 3 },
338 .m = { .min = 79, .max = 127 },
339 .m1 = { .min = 12, .max = 22 },
340 .m2 = { .min = 5, .max = 9 },
341 .p = { .min = 14, .max = 56 },
342 .p1 = { .min = 2, .max = 8 },
343 .p2 = { .dot_limit = 225000,
344 .p2_slow = 7, .p2_fast = 7 },
345 .find_pll = intel_g4x_find_best_PLL,
348 /* LVDS 100mhz refclk limits. */
349 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
350 .dot = { .min = 25000, .max = 350000 },
351 .vco = { .min = 1760000, .max = 3510000 },
352 .n = { .min = 1, .max = 2 },
353 .m = { .min = 79, .max = 126 },
354 .m1 = { .min = 12, .max = 22 },
355 .m2 = { .min = 5, .max = 9 },
356 .p = { .min = 28, .max = 112 },
357 .p1 = { .min = 2, .max = 8 },
358 .p2 = { .dot_limit = 225000,
359 .p2_slow = 14, .p2_fast = 14 },
360 .find_pll = intel_g4x_find_best_PLL,
363 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
364 .dot = { .min = 25000, .max = 350000 },
365 .vco = { .min = 1760000, .max = 3510000 },
366 .n = { .min = 1, .max = 3 },
367 .m = { .min = 79, .max = 126 },
368 .m1 = { .min = 12, .max = 22 },
369 .m2 = { .min = 5, .max = 9 },
370 .p = { .min = 14, .max = 42 },
371 .p1 = { .min = 2, .max = 6 },
372 .p2 = { .dot_limit = 225000,
373 .p2_slow = 7, .p2_fast = 7 },
374 .find_pll = intel_g4x_find_best_PLL,
377 static const intel_limit_t intel_limits_ironlake_display_port = {
378 .dot = { .min = 25000, .max = 350000 },
379 .vco = { .min = 1760000, .max = 3510000},
380 .n = { .min = 1, .max = 2 },
381 .m = { .min = 81, .max = 90 },
382 .m1 = { .min = 12, .max = 22 },
383 .m2 = { .min = 5, .max = 9 },
384 .p = { .min = 10, .max = 20 },
385 .p1 = { .min = 1, .max = 2},
386 .p2 = { .dot_limit = 0,
387 .p2_slow = 10, .p2_fast = 10 },
388 .find_pll = intel_find_pll_ironlake_dp,
391 static const intel_limit_t intel_limits_vlv_dac = {
392 .dot = { .min = 25000, .max = 270000 },
393 .vco = { .min = 4000000, .max = 6000000 },
394 .n = { .min = 1, .max = 7 },
395 .m = { .min = 22, .max = 450 }, /* guess */
396 .m1 = { .min = 2, .max = 3 },
397 .m2 = { .min = 11, .max = 156 },
398 .p = { .min = 10, .max = 30 },
399 .p1 = { .min = 2, .max = 3 },
400 .p2 = { .dot_limit = 270000,
401 .p2_slow = 2, .p2_fast = 20 },
402 .find_pll = intel_vlv_find_best_pll,
405 static const intel_limit_t intel_limits_vlv_hdmi = {
406 .dot = { .min = 20000, .max = 165000 },
407 .vco = { .min = 4000000, .max = 5994000},
408 .n = { .min = 1, .max = 7 },
409 .m = { .min = 60, .max = 300 }, /* guess */
410 .m1 = { .min = 2, .max = 3 },
411 .m2 = { .min = 11, .max = 156 },
412 .p = { .min = 10, .max = 30 },
413 .p1 = { .min = 2, .max = 3 },
414 .p2 = { .dot_limit = 270000,
415 .p2_slow = 2, .p2_fast = 20 },
416 .find_pll = intel_vlv_find_best_pll,
419 static const intel_limit_t intel_limits_vlv_dp = {
420 .dot = { .min = 25000, .max = 270000 },
421 .vco = { .min = 4000000, .max = 6000000 },
422 .n = { .min = 1, .max = 7 },
423 .m = { .min = 22, .max = 450 },
424 .m1 = { .min = 2, .max = 3 },
425 .m2 = { .min = 11, .max = 156 },
426 .p = { .min = 10, .max = 30 },
427 .p1 = { .min = 2, .max = 3 },
428 .p2 = { .dot_limit = 270000,
429 .p2_slow = 2, .p2_fast = 20 },
430 .find_pll = intel_vlv_find_best_pll,
433 u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
435 WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
437 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
438 DRM_ERROR("DPIO idle wait timed out\n");
442 I915_WRITE(DPIO_REG, reg);
443 I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
445 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
446 DRM_ERROR("DPIO read wait timed out\n");
450 return I915_READ(DPIO_DATA);
453 static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
456 WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
458 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
459 DRM_ERROR("DPIO idle wait timed out\n");
463 I915_WRITE(DPIO_DATA, val);
464 I915_WRITE(DPIO_REG, reg);
465 I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
467 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
468 DRM_ERROR("DPIO write wait timed out\n");
471 static void vlv_init_dpio(struct drm_device *dev)
473 struct drm_i915_private *dev_priv = dev->dev_private;
475 /* Reset the DPIO config */
476 I915_WRITE(DPIO_CTL, 0);
477 POSTING_READ(DPIO_CTL);
478 I915_WRITE(DPIO_CTL, 1);
479 POSTING_READ(DPIO_CTL);
482 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
485 struct drm_device *dev = crtc->dev;
486 const intel_limit_t *limit;
488 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
489 if (intel_is_dual_link_lvds(dev)) {
490 if (refclk == 100000)
491 limit = &intel_limits_ironlake_dual_lvds_100m;
493 limit = &intel_limits_ironlake_dual_lvds;
495 if (refclk == 100000)
496 limit = &intel_limits_ironlake_single_lvds_100m;
498 limit = &intel_limits_ironlake_single_lvds;
500 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
501 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
502 limit = &intel_limits_ironlake_display_port;
504 limit = &intel_limits_ironlake_dac;
509 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
511 struct drm_device *dev = crtc->dev;
512 const intel_limit_t *limit;
514 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
515 if (intel_is_dual_link_lvds(dev))
516 limit = &intel_limits_g4x_dual_channel_lvds;
518 limit = &intel_limits_g4x_single_channel_lvds;
519 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
520 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
521 limit = &intel_limits_g4x_hdmi;
522 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
523 limit = &intel_limits_g4x_sdvo;
524 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
525 limit = &intel_limits_g4x_display_port;
526 } else /* The option is for other outputs */
527 limit = &intel_limits_i9xx_sdvo;
532 static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
534 struct drm_device *dev = crtc->dev;
535 const intel_limit_t *limit;
537 if (HAS_PCH_SPLIT(dev))
538 limit = intel_ironlake_limit(crtc, refclk);
539 else if (IS_G4X(dev)) {
540 limit = intel_g4x_limit(crtc);
541 } else if (IS_PINEVIEW(dev)) {
542 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
543 limit = &intel_limits_pineview_lvds;
545 limit = &intel_limits_pineview_sdvo;
546 } else if (IS_VALLEYVIEW(dev)) {
547 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG))
548 limit = &intel_limits_vlv_dac;
549 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
550 limit = &intel_limits_vlv_hdmi;
552 limit = &intel_limits_vlv_dp;
553 } else if (!IS_GEN2(dev)) {
554 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
555 limit = &intel_limits_i9xx_lvds;
557 limit = &intel_limits_i9xx_sdvo;
559 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
560 limit = &intel_limits_i8xx_lvds;
562 limit = &intel_limits_i8xx_dvo;
567 /* m1 is reserved as 0 in Pineview, n is a ring counter */
568 static void pineview_clock(int refclk, intel_clock_t *clock)
570 clock->m = clock->m2 + 2;
571 clock->p = clock->p1 * clock->p2;
572 clock->vco = refclk * clock->m / clock->n;
573 clock->dot = clock->vco / clock->p;
576 static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
578 if (IS_PINEVIEW(dev)) {
579 pineview_clock(refclk, clock);
582 clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
583 clock->p = clock->p1 * clock->p2;
584 clock->vco = refclk * clock->m / (clock->n + 2);
585 clock->dot = clock->vco / clock->p;
589 * Returns whether any output on the specified pipe is of the specified type
591 bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
593 struct drm_device *dev = crtc->dev;
594 struct intel_encoder *encoder;
596 for_each_encoder_on_crtc(dev, crtc, encoder)
597 if (encoder->type == type)
603 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
605 * Returns whether the given set of divisors are valid for a given refclk with
606 * the given connectors.
609 static bool intel_PLL_is_valid(struct drm_device *dev,
610 const intel_limit_t *limit,
611 const intel_clock_t *clock)
613 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
614 INTELPllInvalid("p1 out of range\n");
615 if (clock->p < limit->p.min || limit->p.max < clock->p)
616 INTELPllInvalid("p out of range\n");
617 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
618 INTELPllInvalid("m2 out of range\n");
619 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
620 INTELPllInvalid("m1 out of range\n");
621 if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
622 INTELPllInvalid("m1 <= m2\n");
623 if (clock->m < limit->m.min || limit->m.max < clock->m)
624 INTELPllInvalid("m out of range\n");
625 if (clock->n < limit->n.min || limit->n.max < clock->n)
626 INTELPllInvalid("n out of range\n");
627 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
628 INTELPllInvalid("vco out of range\n");
629 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
630 * connector, etc., rather than just a single range.
632 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
633 INTELPllInvalid("dot out of range\n");
639 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
640 int target, int refclk, intel_clock_t *match_clock,
641 intel_clock_t *best_clock)
644 struct drm_device *dev = crtc->dev;
648 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
650 * For LVDS just rely on its current settings for dual-channel.
651 * We haven't figured out how to reliably set up different
652 * single/dual channel state, if we even can.
654 if (intel_is_dual_link_lvds(dev))
655 clock.p2 = limit->p2.p2_fast;
657 clock.p2 = limit->p2.p2_slow;
659 if (target < limit->p2.dot_limit)
660 clock.p2 = limit->p2.p2_slow;
662 clock.p2 = limit->p2.p2_fast;
665 memset(best_clock, 0, sizeof(*best_clock));
667 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
669 for (clock.m2 = limit->m2.min;
670 clock.m2 <= limit->m2.max; clock.m2++) {
671 /* m1 is always 0 in Pineview */
672 if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
674 for (clock.n = limit->n.min;
675 clock.n <= limit->n.max; clock.n++) {
676 for (clock.p1 = limit->p1.min;
677 clock.p1 <= limit->p1.max; clock.p1++) {
680 intel_clock(dev, refclk, &clock);
681 if (!intel_PLL_is_valid(dev, limit,
685 clock.p != match_clock->p)
688 this_err = abs(clock.dot - target);
689 if (this_err < err) {
698 return (err != target);
702 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
703 int target, int refclk, intel_clock_t *match_clock,
704 intel_clock_t *best_clock)
706 struct drm_device *dev = crtc->dev;
710 /* approximately equals target * 0.00585 */
711 int err_most = (target >> 8) + (target >> 9);
714 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
717 if (HAS_PCH_SPLIT(dev))
721 if (intel_is_dual_link_lvds(dev))
722 clock.p2 = limit->p2.p2_fast;
724 clock.p2 = limit->p2.p2_slow;
726 if (target < limit->p2.dot_limit)
727 clock.p2 = limit->p2.p2_slow;
729 clock.p2 = limit->p2.p2_fast;
732 memset(best_clock, 0, sizeof(*best_clock));
733 max_n = limit->n.max;
734 /* based on hardware requirement, prefer smaller n to precision */
735 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
736 /* based on hardware requirement, prefere larger m1,m2 */
737 for (clock.m1 = limit->m1.max;
738 clock.m1 >= limit->m1.min; clock.m1--) {
739 for (clock.m2 = limit->m2.max;
740 clock.m2 >= limit->m2.min; clock.m2--) {
741 for (clock.p1 = limit->p1.max;
742 clock.p1 >= limit->p1.min; clock.p1--) {
745 intel_clock(dev, refclk, &clock);
746 if (!intel_PLL_is_valid(dev, limit,
750 clock.p != match_clock->p)
753 this_err = abs(clock.dot - target);
754 if (this_err < err_most) {
768 intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
769 int target, int refclk, intel_clock_t *match_clock,
770 intel_clock_t *best_clock)
772 struct drm_device *dev = crtc->dev;
775 if (target < 200000) {
788 intel_clock(dev, refclk, &clock);
789 memcpy(best_clock, &clock, sizeof(intel_clock_t));
793 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
795 intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
796 int target, int refclk, intel_clock_t *match_clock,
797 intel_clock_t *best_clock)
800 if (target < 200000) {
813 clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
814 clock.p = (clock.p1 * clock.p2);
815 clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
817 memcpy(best_clock, &clock, sizeof(intel_clock_t));
821 intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
822 int target, int refclk, intel_clock_t *match_clock,
823 intel_clock_t *best_clock)
825 u32 p1, p2, m1, m2, vco, bestn, bestm1, bestm2, bestp1, bestp2;
827 u32 updrate, minupdate, fracbits, p;
828 unsigned long bestppm, ppm, absppm;
832 dotclk = target * 1000;
835 fastclk = dotclk / (2*100);
839 n = p = p1 = p2 = m = m1 = m2 = vco = bestn = 0;
840 bestm1 = bestm2 = bestp1 = bestp2 = 0;
842 /* based on hardware requirement, prefer smaller n to precision */
843 for (n = limit->n.min; n <= ((refclk) / minupdate); n++) {
844 updrate = refclk / n;
845 for (p1 = limit->p1.max; p1 > limit->p1.min; p1--) {
846 for (p2 = limit->p2.p2_fast+1; p2 > 0; p2--) {
850 /* based on hardware requirement, prefer bigger m1,m2 values */
851 for (m1 = limit->m1.min; m1 <= limit->m1.max; m1++) {
852 m2 = (((2*(fastclk * p * n / m1 )) +
853 refclk) / (2*refclk));
856 if (vco >= limit->vco.min && vco < limit->vco.max) {
857 ppm = 1000000 * ((vco / p) - fastclk) / fastclk;
858 absppm = (ppm > 0) ? ppm : (-ppm);
859 if (absppm < 100 && ((p1 * p2) > (bestp1 * bestp2))) {
863 if (absppm < bestppm - 10) {
880 best_clock->n = bestn;
881 best_clock->m1 = bestm1;
882 best_clock->m2 = bestm2;
883 best_clock->p1 = bestp1;
884 best_clock->p2 = bestp2;
889 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
892 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
893 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
895 return intel_crtc->cpu_transcoder;
898 static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe)
900 struct drm_i915_private *dev_priv = dev->dev_private;
901 u32 frame, frame_reg = PIPEFRAME(pipe);
903 frame = I915_READ(frame_reg);
905 if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
906 DRM_DEBUG_KMS("vblank wait timed out\n");
910 * intel_wait_for_vblank - wait for vblank on a given pipe
912 * @pipe: pipe to wait for
914 * Wait for vblank to occur on a given pipe. Needed for various bits of
917 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
919 struct drm_i915_private *dev_priv = dev->dev_private;
920 int pipestat_reg = PIPESTAT(pipe);
922 if (INTEL_INFO(dev)->gen >= 5) {
923 ironlake_wait_for_vblank(dev, pipe);
927 /* Clear existing vblank status. Note this will clear any other
928 * sticky status fields as well.
930 * This races with i915_driver_irq_handler() with the result
931 * that either function could miss a vblank event. Here it is not
932 * fatal, as we will either wait upon the next vblank interrupt or
933 * timeout. Generally speaking intel_wait_for_vblank() is only
934 * called during modeset at which time the GPU should be idle and
935 * should *not* be performing page flips and thus not waiting on
937 * Currently, the result of us stealing a vblank from the irq
938 * handler is that a single frame will be skipped during swapbuffers.
940 I915_WRITE(pipestat_reg,
941 I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
943 /* Wait for vblank interrupt bit to set */
944 if (wait_for(I915_READ(pipestat_reg) &
945 PIPE_VBLANK_INTERRUPT_STATUS,
947 DRM_DEBUG_KMS("vblank wait timed out\n");
951 * intel_wait_for_pipe_off - wait for pipe to turn off
953 * @pipe: pipe to wait for
955 * After disabling a pipe, we can't wait for vblank in the usual way,
956 * spinning on the vblank interrupt status bit, since we won't actually
957 * see an interrupt when the pipe is disabled.
960 * wait for the pipe register state bit to turn off
963 * wait for the display line value to settle (it usually
964 * ends up stopping at the start of the next frame).
967 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
969 struct drm_i915_private *dev_priv = dev->dev_private;
970 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
973 if (INTEL_INFO(dev)->gen >= 4) {
974 int reg = PIPECONF(cpu_transcoder);
976 /* Wait for the Pipe State to go off */
977 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
979 WARN(1, "pipe_off wait timed out\n");
981 u32 last_line, line_mask;
982 int reg = PIPEDSL(pipe);
983 unsigned long timeout = jiffies + msecs_to_jiffies(100);
986 line_mask = DSL_LINEMASK_GEN2;
988 line_mask = DSL_LINEMASK_GEN3;
990 /* Wait for the display line to settle */
992 last_line = I915_READ(reg) & line_mask;
994 } while (((I915_READ(reg) & line_mask) != last_line) &&
995 time_after(timeout, jiffies));
996 if (time_after(jiffies, timeout))
997 WARN(1, "pipe_off wait timed out\n");
1002 * ibx_digital_port_connected - is the specified port connected?
1003 * @dev_priv: i915 private structure
1004 * @port: the port to test
1006 * Returns true if @port is connected, false otherwise.
1008 bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
1009 struct intel_digital_port *port)
1013 if (HAS_PCH_IBX(dev_priv->dev)) {
1014 switch(port->port) {
1016 bit = SDE_PORTB_HOTPLUG;
1019 bit = SDE_PORTC_HOTPLUG;
1022 bit = SDE_PORTD_HOTPLUG;
1028 switch(port->port) {
1030 bit = SDE_PORTB_HOTPLUG_CPT;
1033 bit = SDE_PORTC_HOTPLUG_CPT;
1036 bit = SDE_PORTD_HOTPLUG_CPT;
1043 return I915_READ(SDEISR) & bit;
1046 static const char *state_string(bool enabled)
1048 return enabled ? "on" : "off";
1051 /* Only for pre-ILK configs */
1052 static void assert_pll(struct drm_i915_private *dev_priv,
1053 enum pipe pipe, bool state)
1060 val = I915_READ(reg);
1061 cur_state = !!(val & DPLL_VCO_ENABLE);
1062 WARN(cur_state != state,
1063 "PLL state assertion failure (expected %s, current %s)\n",
1064 state_string(state), state_string(cur_state));
1066 #define assert_pll_enabled(d, p) assert_pll(d, p, true)
1067 #define assert_pll_disabled(d, p) assert_pll(d, p, false)
1070 static void assert_pch_pll(struct drm_i915_private *dev_priv,
1071 struct intel_pch_pll *pll,
1072 struct intel_crtc *crtc,
1078 if (HAS_PCH_LPT(dev_priv->dev)) {
1079 DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
1084 "asserting PCH PLL %s with no PLL\n", state_string(state)))
1087 val = I915_READ(pll->pll_reg);
1088 cur_state = !!(val & DPLL_VCO_ENABLE);
1089 WARN(cur_state != state,
1090 "PCH PLL state for reg %x assertion failure (expected %s, current %s), val=%08x\n",
1091 pll->pll_reg, state_string(state), state_string(cur_state), val);
1093 /* Make sure the selected PLL is correctly attached to the transcoder */
1094 if (crtc && HAS_PCH_CPT(dev_priv->dev)) {
1097 pch_dpll = I915_READ(PCH_DPLL_SEL);
1098 cur_state = pll->pll_reg == _PCH_DPLL_B;
1099 if (!WARN(((pch_dpll >> (4 * crtc->pipe)) & 1) != cur_state,
1100 "PLL[%d] not attached to this transcoder %d: %08x\n",
1101 cur_state, crtc->pipe, pch_dpll)) {
1102 cur_state = !!(val >> (4*crtc->pipe + 3));
1103 WARN(cur_state != state,
1104 "PLL[%d] not %s on this transcoder %d: %08x\n",
1105 pll->pll_reg == _PCH_DPLL_B,
1106 state_string(state),
1112 #define assert_pch_pll_enabled(d, p, c) assert_pch_pll(d, p, c, true)
1113 #define assert_pch_pll_disabled(d, p, c) assert_pch_pll(d, p, c, false)
1115 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1116 enum pipe pipe, bool state)
1121 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1124 if (HAS_DDI(dev_priv->dev)) {
1125 /* DDI does not have a specific FDI_TX register */
1126 reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
1127 val = I915_READ(reg);
1128 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1130 reg = FDI_TX_CTL(pipe);
1131 val = I915_READ(reg);
1132 cur_state = !!(val & FDI_TX_ENABLE);
1134 WARN(cur_state != state,
1135 "FDI TX state assertion failure (expected %s, current %s)\n",
1136 state_string(state), state_string(cur_state));
1138 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1139 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1141 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1142 enum pipe pipe, bool state)
1148 reg = FDI_RX_CTL(pipe);
1149 val = I915_READ(reg);
1150 cur_state = !!(val & FDI_RX_ENABLE);
1151 WARN(cur_state != state,
1152 "FDI RX state assertion failure (expected %s, current %s)\n",
1153 state_string(state), state_string(cur_state));
1155 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1156 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1158 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1164 /* ILK FDI PLL is always enabled */
1165 if (dev_priv->info->gen == 5)
1168 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1169 if (HAS_DDI(dev_priv->dev))
1172 reg = FDI_TX_CTL(pipe);
1173 val = I915_READ(reg);
1174 WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1177 static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
1183 reg = FDI_RX_CTL(pipe);
1184 val = I915_READ(reg);
1185 WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
1188 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1191 int pp_reg, lvds_reg;
1193 enum pipe panel_pipe = PIPE_A;
1196 if (HAS_PCH_SPLIT(dev_priv->dev)) {
1197 pp_reg = PCH_PP_CONTROL;
1198 lvds_reg = PCH_LVDS;
1200 pp_reg = PP_CONTROL;
1204 val = I915_READ(pp_reg);
1205 if (!(val & PANEL_POWER_ON) ||
1206 ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
1209 if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
1210 panel_pipe = PIPE_B;
1212 WARN(panel_pipe == pipe && locked,
1213 "panel assertion failure, pipe %c regs locked\n",
1217 void assert_pipe(struct drm_i915_private *dev_priv,
1218 enum pipe pipe, bool state)
1223 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1226 /* if we need the pipe A quirk it must be always on */
1227 if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
1230 if (IS_HASWELL(dev_priv->dev) && cpu_transcoder != TRANSCODER_EDP &&
1231 !(I915_READ(HSW_PWR_WELL_DRIVER) & HSW_PWR_WELL_ENABLE)) {
1234 reg = PIPECONF(cpu_transcoder);
1235 val = I915_READ(reg);
1236 cur_state = !!(val & PIPECONF_ENABLE);
1239 WARN(cur_state != state,
1240 "pipe %c assertion failure (expected %s, current %s)\n",
1241 pipe_name(pipe), state_string(state), state_string(cur_state));
1244 static void assert_plane(struct drm_i915_private *dev_priv,
1245 enum plane plane, bool state)
1251 reg = DSPCNTR(plane);
1252 val = I915_READ(reg);
1253 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1254 WARN(cur_state != state,
1255 "plane %c assertion failure (expected %s, current %s)\n",
1256 plane_name(plane), state_string(state), state_string(cur_state));
1259 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1260 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1262 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1269 /* Planes are fixed to pipes on ILK+ */
1270 if (HAS_PCH_SPLIT(dev_priv->dev) || IS_VALLEYVIEW(dev_priv->dev)) {
1271 reg = DSPCNTR(pipe);
1272 val = I915_READ(reg);
1273 WARN((val & DISPLAY_PLANE_ENABLE),
1274 "plane %c assertion failure, should be disabled but not\n",
1279 /* Need to check both planes against the pipe */
1280 for (i = 0; i < 2; i++) {
1282 val = I915_READ(reg);
1283 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1284 DISPPLANE_SEL_PIPE_SHIFT;
1285 WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1286 "plane %c assertion failure, should be off on pipe %c but is still active\n",
1287 plane_name(i), pipe_name(pipe));
1291 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1297 if (!IS_VALLEYVIEW(dev_priv->dev))
1300 /* Need to check both planes against the pipe */
1301 for (i = 0; i < dev_priv->num_plane; i++) {
1302 reg = SPCNTR(pipe, i);
1303 val = I915_READ(reg);
1304 WARN((val & SP_ENABLE),
1305 "sprite %d assertion failure, should be off on pipe %c but is still active\n",
1306 pipe * 2 + i, pipe_name(pipe));
1310 static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1315 if (HAS_PCH_LPT(dev_priv->dev)) {
1316 DRM_DEBUG_DRIVER("LPT does not has PCH refclk, skipping check\n");
1320 val = I915_READ(PCH_DREF_CONTROL);
1321 enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1322 DREF_SUPERSPREAD_SOURCE_MASK));
1323 WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1326 static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
1333 reg = TRANSCONF(pipe);
1334 val = I915_READ(reg);
1335 enabled = !!(val & TRANS_ENABLE);
1337 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1341 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1342 enum pipe pipe, u32 port_sel, u32 val)
1344 if ((val & DP_PORT_EN) == 0)
1347 if (HAS_PCH_CPT(dev_priv->dev)) {
1348 u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1349 u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1350 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1353 if ((val & DP_PIPE_MASK) != (pipe << 30))
1359 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1360 enum pipe pipe, u32 val)
1362 if ((val & SDVO_ENABLE) == 0)
1365 if (HAS_PCH_CPT(dev_priv->dev)) {
1366 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1369 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1375 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1376 enum pipe pipe, u32 val)
1378 if ((val & LVDS_PORT_EN) == 0)
1381 if (HAS_PCH_CPT(dev_priv->dev)) {
1382 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1385 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1391 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1392 enum pipe pipe, u32 val)
1394 if ((val & ADPA_DAC_ENABLE) == 0)
1396 if (HAS_PCH_CPT(dev_priv->dev)) {
1397 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1400 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1406 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1407 enum pipe pipe, int reg, u32 port_sel)
1409 u32 val = I915_READ(reg);
1410 WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1411 "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1412 reg, pipe_name(pipe));
1414 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
1415 && (val & DP_PIPEB_SELECT),
1416 "IBX PCH dp port still using transcoder B\n");
1419 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1420 enum pipe pipe, int reg)
1422 u32 val = I915_READ(reg);
1423 WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1424 "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1425 reg, pipe_name(pipe));
1427 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
1428 && (val & SDVO_PIPE_B_SELECT),
1429 "IBX PCH hdmi port still using transcoder B\n");
1432 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1438 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1439 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1440 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1443 val = I915_READ(reg);
1444 WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1445 "PCH VGA enabled on transcoder %c, should be disabled\n",
1449 val = I915_READ(reg);
1450 WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1451 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1454 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1455 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1456 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1460 * intel_enable_pll - enable a PLL
1461 * @dev_priv: i915 private structure
1462 * @pipe: pipe PLL to enable
1464 * Enable @pipe's PLL so we can start pumping pixels from a plane. Check to
1465 * make sure the PLL reg is writable first though, since the panel write
1466 * protect mechanism may be enabled.
1468 * Note! This is for pre-ILK only.
1470 * Unfortunately needed by dvo_ns2501 since the dvo depends on it running.
1472 static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1477 /* No really, not for ILK+ */
1478 BUG_ON(!IS_VALLEYVIEW(dev_priv->dev) && dev_priv->info->gen >= 5);
1480 /* PLL is protected by panel, make sure we can write it */
1481 if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
1482 assert_panel_unlocked(dev_priv, pipe);
1485 val = I915_READ(reg);
1486 val |= DPLL_VCO_ENABLE;
1488 /* We do this three times for luck */
1489 I915_WRITE(reg, val);
1491 udelay(150); /* wait for warmup */
1492 I915_WRITE(reg, val);
1494 udelay(150); /* wait for warmup */
1495 I915_WRITE(reg, val);
1497 udelay(150); /* wait for warmup */
1501 * intel_disable_pll - disable a PLL
1502 * @dev_priv: i915 private structure
1503 * @pipe: pipe PLL to disable
1505 * Disable the PLL for @pipe, making sure the pipe is off first.
1507 * Note! This is for pre-ILK only.
1509 static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1514 /* Don't disable pipe A or pipe A PLLs if needed */
1515 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1518 /* Make sure the pipe isn't still relying on us */
1519 assert_pipe_disabled(dev_priv, pipe);
1522 val = I915_READ(reg);
1523 val &= ~DPLL_VCO_ENABLE;
1524 I915_WRITE(reg, val);
1530 intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
1531 enum intel_sbi_destination destination)
1535 WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
1537 if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
1539 DRM_ERROR("timeout waiting for SBI to become ready\n");
1543 I915_WRITE(SBI_ADDR, (reg << 16));
1544 I915_WRITE(SBI_DATA, value);
1546 if (destination == SBI_ICLK)
1547 tmp = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRWR;
1549 tmp = SBI_CTL_DEST_MPHY | SBI_CTL_OP_IOWR;
1550 I915_WRITE(SBI_CTL_STAT, SBI_BUSY | tmp);
1552 if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
1554 DRM_ERROR("timeout waiting for SBI to complete write transaction\n");
1560 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
1561 enum intel_sbi_destination destination)
1564 WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
1566 if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
1568 DRM_ERROR("timeout waiting for SBI to become ready\n");
1572 I915_WRITE(SBI_ADDR, (reg << 16));
1574 if (destination == SBI_ICLK)
1575 value = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRRD;
1577 value = SBI_CTL_DEST_MPHY | SBI_CTL_OP_IORD;
1578 I915_WRITE(SBI_CTL_STAT, value | SBI_BUSY);
1580 if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
1582 DRM_ERROR("timeout waiting for SBI to complete read transaction\n");
1586 return I915_READ(SBI_DATA);
1590 * ironlake_enable_pch_pll - enable PCH PLL
1591 * @dev_priv: i915 private structure
1592 * @pipe: pipe PLL to enable
1594 * The PCH PLL needs to be enabled before the PCH transcoder, since it
1595 * drives the transcoder clock.
1597 static void ironlake_enable_pch_pll(struct intel_crtc *intel_crtc)
1599 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
1600 struct intel_pch_pll *pll;
1604 /* PCH PLLs only available on ILK, SNB and IVB */
1605 BUG_ON(dev_priv->info->gen < 5);
1606 pll = intel_crtc->pch_pll;
1610 if (WARN_ON(pll->refcount == 0))
1613 DRM_DEBUG_KMS("enable PCH PLL %x (active %d, on? %d)for crtc %d\n",
1614 pll->pll_reg, pll->active, pll->on,
1615 intel_crtc->base.base.id);
1617 /* PCH refclock must be enabled first */
1618 assert_pch_refclk_enabled(dev_priv);
1620 if (pll->active++ && pll->on) {
1621 assert_pch_pll_enabled(dev_priv, pll, NULL);
1625 DRM_DEBUG_KMS("enabling PCH PLL %x\n", pll->pll_reg);
1628 val = I915_READ(reg);
1629 val |= DPLL_VCO_ENABLE;
1630 I915_WRITE(reg, val);
1637 static void intel_disable_pch_pll(struct intel_crtc *intel_crtc)
1639 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
1640 struct intel_pch_pll *pll = intel_crtc->pch_pll;
1644 /* PCH only available on ILK+ */
1645 BUG_ON(dev_priv->info->gen < 5);
1649 if (WARN_ON(pll->refcount == 0))
1652 DRM_DEBUG_KMS("disable PCH PLL %x (active %d, on? %d) for crtc %d\n",
1653 pll->pll_reg, pll->active, pll->on,
1654 intel_crtc->base.base.id);
1656 if (WARN_ON(pll->active == 0)) {
1657 assert_pch_pll_disabled(dev_priv, pll, NULL);
1661 if (--pll->active) {
1662 assert_pch_pll_enabled(dev_priv, pll, NULL);
1666 DRM_DEBUG_KMS("disabling PCH PLL %x\n", pll->pll_reg);
1668 /* Make sure transcoder isn't still depending on us */
1669 assert_transcoder_disabled(dev_priv, intel_crtc->pipe);
1672 val = I915_READ(reg);
1673 val &= ~DPLL_VCO_ENABLE;
1674 I915_WRITE(reg, val);
1681 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1684 struct drm_device *dev = dev_priv->dev;
1685 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1686 uint32_t reg, val, pipeconf_val;
1688 /* PCH only available on ILK+ */
1689 BUG_ON(dev_priv->info->gen < 5);
1691 /* Make sure PCH DPLL is enabled */
1692 assert_pch_pll_enabled(dev_priv,
1693 to_intel_crtc(crtc)->pch_pll,
1694 to_intel_crtc(crtc));
1696 /* FDI must be feeding us bits for PCH ports */
1697 assert_fdi_tx_enabled(dev_priv, pipe);
1698 assert_fdi_rx_enabled(dev_priv, pipe);
1700 if (HAS_PCH_CPT(dev)) {
1701 /* Workaround: Set the timing override bit before enabling the
1702 * pch transcoder. */
1703 reg = TRANS_CHICKEN2(pipe);
1704 val = I915_READ(reg);
1705 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1706 I915_WRITE(reg, val);
1709 reg = TRANSCONF(pipe);
1710 val = I915_READ(reg);
1711 pipeconf_val = I915_READ(PIPECONF(pipe));
1713 if (HAS_PCH_IBX(dev_priv->dev)) {
1715 * make the BPC in transcoder be consistent with
1716 * that in pipeconf reg.
1718 val &= ~PIPECONF_BPC_MASK;
1719 val |= pipeconf_val & PIPECONF_BPC_MASK;
1722 val &= ~TRANS_INTERLACE_MASK;
1723 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1724 if (HAS_PCH_IBX(dev_priv->dev) &&
1725 intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
1726 val |= TRANS_LEGACY_INTERLACED_ILK;
1728 val |= TRANS_INTERLACED;
1730 val |= TRANS_PROGRESSIVE;
1732 I915_WRITE(reg, val | TRANS_ENABLE);
1733 if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1734 DRM_ERROR("failed to enable transcoder %d\n", pipe);
1737 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1738 enum transcoder cpu_transcoder)
1740 u32 val, pipeconf_val;
1742 /* PCH only available on ILK+ */
1743 BUG_ON(dev_priv->info->gen < 5);
1745 /* FDI must be feeding us bits for PCH ports */
1746 assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1747 assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
1749 /* Workaround: set timing override bit. */
1750 val = I915_READ(_TRANSA_CHICKEN2);
1751 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1752 I915_WRITE(_TRANSA_CHICKEN2, val);
1755 pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1757 if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1758 PIPECONF_INTERLACED_ILK)
1759 val |= TRANS_INTERLACED;
1761 val |= TRANS_PROGRESSIVE;
1763 I915_WRITE(TRANSCONF(TRANSCODER_A), val);
1764 if (wait_for(I915_READ(_TRANSACONF) & TRANS_STATE_ENABLE, 100))
1765 DRM_ERROR("Failed to enable PCH transcoder\n");
1768 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1771 struct drm_device *dev = dev_priv->dev;
1774 /* FDI relies on the transcoder */
1775 assert_fdi_tx_disabled(dev_priv, pipe);
1776 assert_fdi_rx_disabled(dev_priv, pipe);
1778 /* Ports must be off as well */
1779 assert_pch_ports_disabled(dev_priv, pipe);
1781 reg = TRANSCONF(pipe);
1782 val = I915_READ(reg);
1783 val &= ~TRANS_ENABLE;
1784 I915_WRITE(reg, val);
1785 /* wait for PCH transcoder off, transcoder state */
1786 if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1787 DRM_ERROR("failed to disable transcoder %d\n", pipe);
1789 if (!HAS_PCH_IBX(dev)) {
1790 /* Workaround: Clear the timing override chicken bit again. */
1791 reg = TRANS_CHICKEN2(pipe);
1792 val = I915_READ(reg);
1793 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1794 I915_WRITE(reg, val);
1798 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1802 val = I915_READ(_TRANSACONF);
1803 val &= ~TRANS_ENABLE;
1804 I915_WRITE(_TRANSACONF, val);
1805 /* wait for PCH transcoder off, transcoder state */
1806 if (wait_for((I915_READ(_TRANSACONF) & TRANS_STATE_ENABLE) == 0, 50))
1807 DRM_ERROR("Failed to disable PCH transcoder\n");
1809 /* Workaround: clear timing override bit. */
1810 val = I915_READ(_TRANSA_CHICKEN2);
1811 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1812 I915_WRITE(_TRANSA_CHICKEN2, val);
1816 * intel_enable_pipe - enable a pipe, asserting requirements
1817 * @dev_priv: i915 private structure
1818 * @pipe: pipe to enable
1819 * @pch_port: on ILK+, is this pipe driving a PCH port or not
1821 * Enable @pipe, making sure that various hardware specific requirements
1822 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1824 * @pipe should be %PIPE_A or %PIPE_B.
1826 * Will wait until the pipe is actually running (i.e. first vblank) before
1829 static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
1832 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1834 enum pipe pch_transcoder;
1838 if (HAS_PCH_LPT(dev_priv->dev))
1839 pch_transcoder = TRANSCODER_A;
1841 pch_transcoder = pipe;
1844 * A pipe without a PLL won't actually be able to drive bits from
1845 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
1848 if (!HAS_PCH_SPLIT(dev_priv->dev))
1849 assert_pll_enabled(dev_priv, pipe);
1852 /* if driving the PCH, we need FDI enabled */
1853 assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
1854 assert_fdi_tx_pll_enabled(dev_priv,
1855 (enum pipe) cpu_transcoder);
1857 /* FIXME: assert CPU port conditions for SNB+ */
1860 reg = PIPECONF(cpu_transcoder);
1861 val = I915_READ(reg);
1862 if (val & PIPECONF_ENABLE)
1865 I915_WRITE(reg, val | PIPECONF_ENABLE);
1866 intel_wait_for_vblank(dev_priv->dev, pipe);
1870 * intel_disable_pipe - disable a pipe, asserting requirements
1871 * @dev_priv: i915 private structure
1872 * @pipe: pipe to disable
1874 * Disable @pipe, making sure that various hardware specific requirements
1875 * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
1877 * @pipe should be %PIPE_A or %PIPE_B.
1879 * Will wait until the pipe has shut down before returning.
1881 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
1884 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1890 * Make sure planes won't keep trying to pump pixels to us,
1891 * or we might hang the display.
1893 assert_planes_disabled(dev_priv, pipe);
1894 assert_sprites_disabled(dev_priv, pipe);
1896 /* Don't disable pipe A or pipe A PLLs if needed */
1897 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1900 reg = PIPECONF(cpu_transcoder);
1901 val = I915_READ(reg);
1902 if ((val & PIPECONF_ENABLE) == 0)
1905 I915_WRITE(reg, val & ~PIPECONF_ENABLE);
1906 intel_wait_for_pipe_off(dev_priv->dev, pipe);
1910 * Plane regs are double buffered, going from enabled->disabled needs a
1911 * trigger in order to latch. The display address reg provides this.
1913 void intel_flush_display_plane(struct drm_i915_private *dev_priv,
1916 if (dev_priv->info->gen >= 4)
1917 I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
1919 I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
1923 * intel_enable_plane - enable a display plane on a given pipe
1924 * @dev_priv: i915 private structure
1925 * @plane: plane to enable
1926 * @pipe: pipe being fed
1928 * Enable @plane on @pipe, making sure that @pipe is running first.
1930 static void intel_enable_plane(struct drm_i915_private *dev_priv,
1931 enum plane plane, enum pipe pipe)
1936 /* If the pipe isn't enabled, we can't pump pixels and may hang */
1937 assert_pipe_enabled(dev_priv, pipe);
1939 reg = DSPCNTR(plane);
1940 val = I915_READ(reg);
1941 if (val & DISPLAY_PLANE_ENABLE)
1944 I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
1945 intel_flush_display_plane(dev_priv, plane);
1946 intel_wait_for_vblank(dev_priv->dev, pipe);
1950 * intel_disable_plane - disable a display plane
1951 * @dev_priv: i915 private structure
1952 * @plane: plane to disable
1953 * @pipe: pipe consuming the data
1955 * Disable @plane; should be an independent operation.
1957 static void intel_disable_plane(struct drm_i915_private *dev_priv,
1958 enum plane plane, enum pipe pipe)
1963 reg = DSPCNTR(plane);
1964 val = I915_READ(reg);
1965 if ((val & DISPLAY_PLANE_ENABLE) == 0)
1968 I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
1969 intel_flush_display_plane(dev_priv, plane);
1970 intel_wait_for_vblank(dev_priv->dev, pipe);
1973 static bool need_vtd_wa(struct drm_device *dev)
1975 #ifdef CONFIG_INTEL_IOMMU
1976 if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
1983 intel_pin_and_fence_fb_obj(struct drm_device *dev,
1984 struct drm_i915_gem_object *obj,
1985 struct intel_ring_buffer *pipelined)
1987 struct drm_i915_private *dev_priv = dev->dev_private;
1991 switch (obj->tiling_mode) {
1992 case I915_TILING_NONE:
1993 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1994 alignment = 128 * 1024;
1995 else if (INTEL_INFO(dev)->gen >= 4)
1996 alignment = 4 * 1024;
1998 alignment = 64 * 1024;
2001 /* pin() will align the object as required by fence */
2005 /* FIXME: Is this true? */
2006 DRM_ERROR("Y tiled not allowed for scan out buffers\n");
2012 /* Note that the w/a also requires 64 PTE of padding following the
2013 * bo. We currently fill all unused PTE with the shadow page and so
2014 * we should always have valid PTE following the scanout preventing
2017 if (need_vtd_wa(dev) && alignment < 256 * 1024)
2018 alignment = 256 * 1024;
2020 dev_priv->mm.interruptible = false;
2021 ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
2023 goto err_interruptible;
2025 /* Install a fence for tiled scan-out. Pre-i965 always needs a
2026 * fence, whereas 965+ only requires a fence if using
2027 * framebuffer compression. For simplicity, we always install
2028 * a fence as the cost is not that onerous.
2030 ret = i915_gem_object_get_fence(obj);
2034 i915_gem_object_pin_fence(obj);
2036 dev_priv->mm.interruptible = true;
2040 i915_gem_object_unpin(obj);
2042 dev_priv->mm.interruptible = true;
2046 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
2048 i915_gem_object_unpin_fence(obj);
2049 i915_gem_object_unpin(obj);
2052 /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
2053 * is assumed to be a power-of-two. */
2054 unsigned long intel_gen4_compute_page_offset(int *x, int *y,
2055 unsigned int tiling_mode,
2059 if (tiling_mode != I915_TILING_NONE) {
2060 unsigned int tile_rows, tiles;
2065 tiles = *x / (512/cpp);
2068 return tile_rows * pitch * 8 + tiles * 4096;
2070 unsigned int offset;
2072 offset = *y * pitch + *x * cpp;
2074 *x = (offset & 4095) / cpp;
2075 return offset & -4096;
2079 static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2082 struct drm_device *dev = crtc->dev;
2083 struct drm_i915_private *dev_priv = dev->dev_private;
2084 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2085 struct intel_framebuffer *intel_fb;
2086 struct drm_i915_gem_object *obj;
2087 int plane = intel_crtc->plane;
2088 unsigned long linear_offset;
2097 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
2101 intel_fb = to_intel_framebuffer(fb);
2102 obj = intel_fb->obj;
2104 reg = DSPCNTR(plane);
2105 dspcntr = I915_READ(reg);
2106 /* Mask out pixel format bits in case we change it */
2107 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2108 switch (fb->pixel_format) {
2110 dspcntr |= DISPPLANE_8BPP;
2112 case DRM_FORMAT_XRGB1555:
2113 case DRM_FORMAT_ARGB1555:
2114 dspcntr |= DISPPLANE_BGRX555;
2116 case DRM_FORMAT_RGB565:
2117 dspcntr |= DISPPLANE_BGRX565;
2119 case DRM_FORMAT_XRGB8888:
2120 case DRM_FORMAT_ARGB8888:
2121 dspcntr |= DISPPLANE_BGRX888;
2123 case DRM_FORMAT_XBGR8888:
2124 case DRM_FORMAT_ABGR8888:
2125 dspcntr |= DISPPLANE_RGBX888;
2127 case DRM_FORMAT_XRGB2101010:
2128 case DRM_FORMAT_ARGB2101010:
2129 dspcntr |= DISPPLANE_BGRX101010;
2131 case DRM_FORMAT_XBGR2101010:
2132 case DRM_FORMAT_ABGR2101010:
2133 dspcntr |= DISPPLANE_RGBX101010;
2139 if (INTEL_INFO(dev)->gen >= 4) {
2140 if (obj->tiling_mode != I915_TILING_NONE)
2141 dspcntr |= DISPPLANE_TILED;
2143 dspcntr &= ~DISPPLANE_TILED;
2146 I915_WRITE(reg, dspcntr);
2148 linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2150 if (INTEL_INFO(dev)->gen >= 4) {
2151 intel_crtc->dspaddr_offset =
2152 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2153 fb->bits_per_pixel / 8,
2155 linear_offset -= intel_crtc->dspaddr_offset;
2157 intel_crtc->dspaddr_offset = linear_offset;
2160 DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
2161 obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
2162 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2163 if (INTEL_INFO(dev)->gen >= 4) {
2164 I915_MODIFY_DISPBASE(DSPSURF(plane),
2165 obj->gtt_offset + intel_crtc->dspaddr_offset);
2166 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2167 I915_WRITE(DSPLINOFF(plane), linear_offset);
2169 I915_WRITE(DSPADDR(plane), obj->gtt_offset + linear_offset);
2175 static int ironlake_update_plane(struct drm_crtc *crtc,
2176 struct drm_framebuffer *fb, int x, int y)
2178 struct drm_device *dev = crtc->dev;
2179 struct drm_i915_private *dev_priv = dev->dev_private;
2180 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2181 struct intel_framebuffer *intel_fb;
2182 struct drm_i915_gem_object *obj;
2183 int plane = intel_crtc->plane;
2184 unsigned long linear_offset;
2194 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
2198 intel_fb = to_intel_framebuffer(fb);
2199 obj = intel_fb->obj;
2201 reg = DSPCNTR(plane);
2202 dspcntr = I915_READ(reg);
2203 /* Mask out pixel format bits in case we change it */
2204 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2205 switch (fb->pixel_format) {
2207 dspcntr |= DISPPLANE_8BPP;
2209 case DRM_FORMAT_RGB565:
2210 dspcntr |= DISPPLANE_BGRX565;
2212 case DRM_FORMAT_XRGB8888:
2213 case DRM_FORMAT_ARGB8888:
2214 dspcntr |= DISPPLANE_BGRX888;
2216 case DRM_FORMAT_XBGR8888:
2217 case DRM_FORMAT_ABGR8888:
2218 dspcntr |= DISPPLANE_RGBX888;
2220 case DRM_FORMAT_XRGB2101010:
2221 case DRM_FORMAT_ARGB2101010:
2222 dspcntr |= DISPPLANE_BGRX101010;
2224 case DRM_FORMAT_XBGR2101010:
2225 case DRM_FORMAT_ABGR2101010:
2226 dspcntr |= DISPPLANE_RGBX101010;
2232 if (obj->tiling_mode != I915_TILING_NONE)
2233 dspcntr |= DISPPLANE_TILED;
2235 dspcntr &= ~DISPPLANE_TILED;
2238 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2240 I915_WRITE(reg, dspcntr);
2242 linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2243 intel_crtc->dspaddr_offset =
2244 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2245 fb->bits_per_pixel / 8,
2247 linear_offset -= intel_crtc->dspaddr_offset;
2249 DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
2250 obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
2251 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2252 I915_MODIFY_DISPBASE(DSPSURF(plane),
2253 obj->gtt_offset + intel_crtc->dspaddr_offset);
2254 if (IS_HASWELL(dev)) {
2255 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2257 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2258 I915_WRITE(DSPLINOFF(plane), linear_offset);
2265 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2267 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2268 int x, int y, enum mode_set_atomic state)
2270 struct drm_device *dev = crtc->dev;
2271 struct drm_i915_private *dev_priv = dev->dev_private;
2273 if (dev_priv->display.disable_fbc)
2274 dev_priv->display.disable_fbc(dev);
2275 intel_increase_pllclock(crtc);
2277 return dev_priv->display.update_plane(crtc, fb, x, y);
2280 void intel_display_handle_reset(struct drm_device *dev)
2282 struct drm_i915_private *dev_priv = dev->dev_private;
2283 struct drm_crtc *crtc;
2286 * Flips in the rings have been nuked by the reset,
2287 * so complete all pending flips so that user space
2288 * will get its events and not get stuck.
2290 * Also update the base address of all primary
2291 * planes to the the last fb to make sure we're
2292 * showing the correct fb after a reset.
2294 * Need to make two loops over the crtcs so that we
2295 * don't try to grab a crtc mutex before the
2296 * pending_flip_queue really got woken up.
2299 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2300 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2301 enum plane plane = intel_crtc->plane;
2303 intel_prepare_page_flip(dev, plane);
2304 intel_finish_page_flip_plane(dev, plane);
2307 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2308 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2310 mutex_lock(&crtc->mutex);
2311 if (intel_crtc->active)
2312 dev_priv->display.update_plane(crtc, crtc->fb,
2314 mutex_unlock(&crtc->mutex);
2319 intel_finish_fb(struct drm_framebuffer *old_fb)
2321 struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
2322 struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
2323 bool was_interruptible = dev_priv->mm.interruptible;
2326 /* Big Hammer, we also need to ensure that any pending
2327 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2328 * current scanout is retired before unpinning the old
2331 * This should only fail upon a hung GPU, in which case we
2332 * can safely continue.
2334 dev_priv->mm.interruptible = false;
2335 ret = i915_gem_object_finish_gpu(obj);
2336 dev_priv->mm.interruptible = was_interruptible;
2341 static void intel_crtc_update_sarea_pos(struct drm_crtc *crtc, int x, int y)
2343 struct drm_device *dev = crtc->dev;
2344 struct drm_i915_master_private *master_priv;
2345 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2347 if (!dev->primary->master)
2350 master_priv = dev->primary->master->driver_priv;
2351 if (!master_priv->sarea_priv)
2354 switch (intel_crtc->pipe) {
2356 master_priv->sarea_priv->pipeA_x = x;
2357 master_priv->sarea_priv->pipeA_y = y;
2360 master_priv->sarea_priv->pipeB_x = x;
2361 master_priv->sarea_priv->pipeB_y = y;
2369 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2370 struct drm_framebuffer *fb)
2372 struct drm_device *dev = crtc->dev;
2373 struct drm_i915_private *dev_priv = dev->dev_private;
2374 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2375 struct drm_framebuffer *old_fb;
2380 DRM_ERROR("No FB bound\n");
2384 if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
2385 DRM_ERROR("no plane for crtc: plane %d, num_pipes %d\n",
2387 INTEL_INFO(dev)->num_pipes);
2391 mutex_lock(&dev->struct_mutex);
2392 ret = intel_pin_and_fence_fb_obj(dev,
2393 to_intel_framebuffer(fb)->obj,
2396 mutex_unlock(&dev->struct_mutex);
2397 DRM_ERROR("pin & fence failed\n");
2401 ret = dev_priv->display.update_plane(crtc, fb, x, y);
2403 intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
2404 mutex_unlock(&dev->struct_mutex);
2405 DRM_ERROR("failed to update base address\n");
2415 intel_wait_for_vblank(dev, intel_crtc->pipe);
2416 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
2419 intel_update_fbc(dev);
2420 mutex_unlock(&dev->struct_mutex);
2422 intel_crtc_update_sarea_pos(crtc, x, y);
2427 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2429 struct drm_device *dev = crtc->dev;
2430 struct drm_i915_private *dev_priv = dev->dev_private;
2431 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2432 int pipe = intel_crtc->pipe;
2435 /* enable normal train */
2436 reg = FDI_TX_CTL(pipe);
2437 temp = I915_READ(reg);
2438 if (IS_IVYBRIDGE(dev)) {
2439 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2440 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2442 temp &= ~FDI_LINK_TRAIN_NONE;
2443 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2445 I915_WRITE(reg, temp);
2447 reg = FDI_RX_CTL(pipe);
2448 temp = I915_READ(reg);
2449 if (HAS_PCH_CPT(dev)) {
2450 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2451 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2453 temp &= ~FDI_LINK_TRAIN_NONE;
2454 temp |= FDI_LINK_TRAIN_NONE;
2456 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2458 /* wait one idle pattern time */
2462 /* IVB wants error correction enabled */
2463 if (IS_IVYBRIDGE(dev))
2464 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2465 FDI_FE_ERRC_ENABLE);
2468 static void ivb_modeset_global_resources(struct drm_device *dev)
2470 struct drm_i915_private *dev_priv = dev->dev_private;
2471 struct intel_crtc *pipe_B_crtc =
2472 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
2473 struct intel_crtc *pipe_C_crtc =
2474 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
2477 /* When everything is off disable fdi C so that we could enable fdi B
2478 * with all lanes. XXX: This misses the case where a pipe is not using
2479 * any pch resources and so doesn't need any fdi lanes. */
2480 if (!pipe_B_crtc->base.enabled && !pipe_C_crtc->base.enabled) {
2481 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
2482 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
2484 temp = I915_READ(SOUTH_CHICKEN1);
2485 temp &= ~FDI_BC_BIFURCATION_SELECT;
2486 DRM_DEBUG_KMS("disabling fdi C rx\n");
2487 I915_WRITE(SOUTH_CHICKEN1, temp);
2491 /* The FDI link training functions for ILK/Ibexpeak. */
2492 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
2494 struct drm_device *dev = crtc->dev;
2495 struct drm_i915_private *dev_priv = dev->dev_private;
2496 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2497 int pipe = intel_crtc->pipe;
2498 int plane = intel_crtc->plane;
2499 u32 reg, temp, tries;
2501 /* FDI needs bits from pipe & plane first */
2502 assert_pipe_enabled(dev_priv, pipe);
2503 assert_plane_enabled(dev_priv, plane);
2505 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2507 reg = FDI_RX_IMR(pipe);
2508 temp = I915_READ(reg);
2509 temp &= ~FDI_RX_SYMBOL_LOCK;
2510 temp &= ~FDI_RX_BIT_LOCK;
2511 I915_WRITE(reg, temp);
2515 /* enable CPU FDI TX and PCH FDI RX */
2516 reg = FDI_TX_CTL(pipe);
2517 temp = I915_READ(reg);
2519 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2520 temp &= ~FDI_LINK_TRAIN_NONE;
2521 temp |= FDI_LINK_TRAIN_PATTERN_1;
2522 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2524 reg = FDI_RX_CTL(pipe);
2525 temp = I915_READ(reg);
2526 temp &= ~FDI_LINK_TRAIN_NONE;
2527 temp |= FDI_LINK_TRAIN_PATTERN_1;
2528 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2533 /* Ironlake workaround, enable clock pointer after FDI enable*/
2534 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2535 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
2536 FDI_RX_PHASE_SYNC_POINTER_EN);
2538 reg = FDI_RX_IIR(pipe);
2539 for (tries = 0; tries < 5; tries++) {
2540 temp = I915_READ(reg);
2541 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2543 if ((temp & FDI_RX_BIT_LOCK)) {
2544 DRM_DEBUG_KMS("FDI train 1 done.\n");
2545 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2550 DRM_ERROR("FDI train 1 fail!\n");
2553 reg = FDI_TX_CTL(pipe);
2554 temp = I915_READ(reg);
2555 temp &= ~FDI_LINK_TRAIN_NONE;
2556 temp |= FDI_LINK_TRAIN_PATTERN_2;
2557 I915_WRITE(reg, temp);
2559 reg = FDI_RX_CTL(pipe);
2560 temp = I915_READ(reg);
2561 temp &= ~FDI_LINK_TRAIN_NONE;
2562 temp |= FDI_LINK_TRAIN_PATTERN_2;
2563 I915_WRITE(reg, temp);
2568 reg = FDI_RX_IIR(pipe);
2569 for (tries = 0; tries < 5; tries++) {
2570 temp = I915_READ(reg);
2571 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2573 if (temp & FDI_RX_SYMBOL_LOCK) {
2574 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2575 DRM_DEBUG_KMS("FDI train 2 done.\n");
2580 DRM_ERROR("FDI train 2 fail!\n");
2582 DRM_DEBUG_KMS("FDI train done\n");
2586 static const int snb_b_fdi_train_param[] = {
2587 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
2588 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
2589 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
2590 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
2593 /* The FDI link training functions for SNB/Cougarpoint. */
2594 static void gen6_fdi_link_train(struct drm_crtc *crtc)
2596 struct drm_device *dev = crtc->dev;
2597 struct drm_i915_private *dev_priv = dev->dev_private;
2598 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2599 int pipe = intel_crtc->pipe;
2600 u32 reg, temp, i, retry;
2602 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2604 reg = FDI_RX_IMR(pipe);
2605 temp = I915_READ(reg);
2606 temp &= ~FDI_RX_SYMBOL_LOCK;
2607 temp &= ~FDI_RX_BIT_LOCK;
2608 I915_WRITE(reg, temp);
2613 /* enable CPU FDI TX and PCH FDI RX */
2614 reg = FDI_TX_CTL(pipe);
2615 temp = I915_READ(reg);
2617 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2618 temp &= ~FDI_LINK_TRAIN_NONE;
2619 temp |= FDI_LINK_TRAIN_PATTERN_1;
2620 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2622 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2623 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2625 I915_WRITE(FDI_RX_MISC(pipe),
2626 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2628 reg = FDI_RX_CTL(pipe);
2629 temp = I915_READ(reg);
2630 if (HAS_PCH_CPT(dev)) {
2631 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2632 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2634 temp &= ~FDI_LINK_TRAIN_NONE;
2635 temp |= FDI_LINK_TRAIN_PATTERN_1;
2637 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2642 for (i = 0; i < 4; i++) {
2643 reg = FDI_TX_CTL(pipe);
2644 temp = I915_READ(reg);
2645 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2646 temp |= snb_b_fdi_train_param[i];
2647 I915_WRITE(reg, temp);
2652 for (retry = 0; retry < 5; retry++) {
2653 reg = FDI_RX_IIR(pipe);
2654 temp = I915_READ(reg);
2655 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2656 if (temp & FDI_RX_BIT_LOCK) {
2657 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2658 DRM_DEBUG_KMS("FDI train 1 done.\n");
2667 DRM_ERROR("FDI train 1 fail!\n");
2670 reg = FDI_TX_CTL(pipe);
2671 temp = I915_READ(reg);
2672 temp &= ~FDI_LINK_TRAIN_NONE;
2673 temp |= FDI_LINK_TRAIN_PATTERN_2;
2675 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2677 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2679 I915_WRITE(reg, temp);
2681 reg = FDI_RX_CTL(pipe);
2682 temp = I915_READ(reg);
2683 if (HAS_PCH_CPT(dev)) {
2684 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2685 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2687 temp &= ~FDI_LINK_TRAIN_NONE;
2688 temp |= FDI_LINK_TRAIN_PATTERN_2;
2690 I915_WRITE(reg, temp);
2695 for (i = 0; i < 4; i++) {
2696 reg = FDI_TX_CTL(pipe);
2697 temp = I915_READ(reg);
2698 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2699 temp |= snb_b_fdi_train_param[i];
2700 I915_WRITE(reg, temp);
2705 for (retry = 0; retry < 5; retry++) {
2706 reg = FDI_RX_IIR(pipe);
2707 temp = I915_READ(reg);
2708 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2709 if (temp & FDI_RX_SYMBOL_LOCK) {
2710 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2711 DRM_DEBUG_KMS("FDI train 2 done.\n");
2720 DRM_ERROR("FDI train 2 fail!\n");
2722 DRM_DEBUG_KMS("FDI train done.\n");
2725 /* Manual link training for Ivy Bridge A0 parts */
2726 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
2728 struct drm_device *dev = crtc->dev;
2729 struct drm_i915_private *dev_priv = dev->dev_private;
2730 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2731 int pipe = intel_crtc->pipe;
2734 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2736 reg = FDI_RX_IMR(pipe);
2737 temp = I915_READ(reg);
2738 temp &= ~FDI_RX_SYMBOL_LOCK;
2739 temp &= ~FDI_RX_BIT_LOCK;
2740 I915_WRITE(reg, temp);
2745 DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
2746 I915_READ(FDI_RX_IIR(pipe)));
2748 /* enable CPU FDI TX and PCH FDI RX */
2749 reg = FDI_TX_CTL(pipe);
2750 temp = I915_READ(reg);
2752 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2753 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
2754 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
2755 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2756 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2757 temp |= FDI_COMPOSITE_SYNC;
2758 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2760 I915_WRITE(FDI_RX_MISC(pipe),
2761 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2763 reg = FDI_RX_CTL(pipe);
2764 temp = I915_READ(reg);
2765 temp &= ~FDI_LINK_TRAIN_AUTO;
2766 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2767 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2768 temp |= FDI_COMPOSITE_SYNC;
2769 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2774 for (i = 0; i < 4; i++) {
2775 reg = FDI_TX_CTL(pipe);
2776 temp = I915_READ(reg);
2777 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2778 temp |= snb_b_fdi_train_param[i];
2779 I915_WRITE(reg, temp);
2784 reg = FDI_RX_IIR(pipe);
2785 temp = I915_READ(reg);
2786 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2788 if (temp & FDI_RX_BIT_LOCK ||
2789 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
2790 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2791 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n", i);
2796 DRM_ERROR("FDI train 1 fail!\n");
2799 reg = FDI_TX_CTL(pipe);
2800 temp = I915_READ(reg);
2801 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2802 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
2803 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2804 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2805 I915_WRITE(reg, temp);
2807 reg = FDI_RX_CTL(pipe);
2808 temp = I915_READ(reg);
2809 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2810 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2811 I915_WRITE(reg, temp);
2816 for (i = 0; i < 4; i++) {
2817 reg = FDI_TX_CTL(pipe);
2818 temp = I915_READ(reg);
2819 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2820 temp |= snb_b_fdi_train_param[i];
2821 I915_WRITE(reg, temp);
2826 reg = FDI_RX_IIR(pipe);
2827 temp = I915_READ(reg);
2828 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2830 if (temp & FDI_RX_SYMBOL_LOCK) {
2831 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2832 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n", i);
2837 DRM_ERROR("FDI train 2 fail!\n");
2839 DRM_DEBUG_KMS("FDI train done.\n");
2842 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
2844 struct drm_device *dev = intel_crtc->base.dev;
2845 struct drm_i915_private *dev_priv = dev->dev_private;
2846 int pipe = intel_crtc->pipe;
2850 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
2851 reg = FDI_RX_CTL(pipe);
2852 temp = I915_READ(reg);
2853 temp &= ~((0x7 << 19) | (0x7 << 16));
2854 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2855 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2856 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
2861 /* Switch from Rawclk to PCDclk */
2862 temp = I915_READ(reg);
2863 I915_WRITE(reg, temp | FDI_PCDCLK);
2868 /* Enable CPU FDI TX PLL, always on for Ironlake */
2869 reg = FDI_TX_CTL(pipe);
2870 temp = I915_READ(reg);
2871 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
2872 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
2879 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
2881 struct drm_device *dev = intel_crtc->base.dev;
2882 struct drm_i915_private *dev_priv = dev->dev_private;
2883 int pipe = intel_crtc->pipe;
2886 /* Switch from PCDclk to Rawclk */
2887 reg = FDI_RX_CTL(pipe);
2888 temp = I915_READ(reg);
2889 I915_WRITE(reg, temp & ~FDI_PCDCLK);
2891 /* Disable CPU FDI TX PLL */
2892 reg = FDI_TX_CTL(pipe);
2893 temp = I915_READ(reg);
2894 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
2899 reg = FDI_RX_CTL(pipe);
2900 temp = I915_READ(reg);
2901 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
2903 /* Wait for the clocks to turn off. */
2908 static void ironlake_fdi_disable(struct drm_crtc *crtc)
2910 struct drm_device *dev = crtc->dev;
2911 struct drm_i915_private *dev_priv = dev->dev_private;
2912 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2913 int pipe = intel_crtc->pipe;
2916 /* disable CPU FDI tx and PCH FDI rx */
2917 reg = FDI_TX_CTL(pipe);
2918 temp = I915_READ(reg);
2919 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
2922 reg = FDI_RX_CTL(pipe);
2923 temp = I915_READ(reg);
2924 temp &= ~(0x7 << 16);
2925 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2926 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
2931 /* Ironlake workaround, disable clock pointer after downing FDI */
2932 if (HAS_PCH_IBX(dev)) {
2933 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2936 /* still set train pattern 1 */
2937 reg = FDI_TX_CTL(pipe);
2938 temp = I915_READ(reg);
2939 temp &= ~FDI_LINK_TRAIN_NONE;
2940 temp |= FDI_LINK_TRAIN_PATTERN_1;
2941 I915_WRITE(reg, temp);
2943 reg = FDI_RX_CTL(pipe);
2944 temp = I915_READ(reg);
2945 if (HAS_PCH_CPT(dev)) {
2946 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2947 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2949 temp &= ~FDI_LINK_TRAIN_NONE;
2950 temp |= FDI_LINK_TRAIN_PATTERN_1;
2952 /* BPC in FDI rx is consistent with that in PIPECONF */
2953 temp &= ~(0x07 << 16);
2954 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2955 I915_WRITE(reg, temp);
2961 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
2963 struct drm_device *dev = crtc->dev;
2964 struct drm_i915_private *dev_priv = dev->dev_private;
2965 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2966 unsigned long flags;
2969 if (i915_reset_in_progress(&dev_priv->gpu_error) ||
2970 intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
2973 spin_lock_irqsave(&dev->event_lock, flags);
2974 pending = to_intel_crtc(crtc)->unpin_work != NULL;
2975 spin_unlock_irqrestore(&dev->event_lock, flags);
2980 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
2982 struct drm_device *dev = crtc->dev;
2983 struct drm_i915_private *dev_priv = dev->dev_private;
2985 if (crtc->fb == NULL)
2988 WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
2990 wait_event(dev_priv->pending_flip_queue,
2991 !intel_crtc_has_pending_flip(crtc));
2993 mutex_lock(&dev->struct_mutex);
2994 intel_finish_fb(crtc->fb);
2995 mutex_unlock(&dev->struct_mutex);
2998 /* Program iCLKIP clock to the desired frequency */
2999 static void lpt_program_iclkip(struct drm_crtc *crtc)
3001 struct drm_device *dev = crtc->dev;
3002 struct drm_i915_private *dev_priv = dev->dev_private;
3003 u32 divsel, phaseinc, auxdiv, phasedir = 0;
3006 mutex_lock(&dev_priv->dpio_lock);
3008 /* It is necessary to ungate the pixclk gate prior to programming
3009 * the divisors, and gate it back when it is done.
3011 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
3013 /* Disable SSCCTL */
3014 intel_sbi_write(dev_priv, SBI_SSCCTL6,
3015 intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) |
3019 /* 20MHz is a corner case which is out of range for the 7-bit divisor */
3020 if (crtc->mode.clock == 20000) {
3025 /* The iCLK virtual clock root frequency is in MHz,
3026 * but the crtc->mode.clock in in KHz. To get the divisors,
3027 * it is necessary to divide one by another, so we
3028 * convert the virtual clock precision to KHz here for higher
3031 u32 iclk_virtual_root_freq = 172800 * 1000;
3032 u32 iclk_pi_range = 64;
3033 u32 desired_divisor, msb_divisor_value, pi_value;
3035 desired_divisor = (iclk_virtual_root_freq / crtc->mode.clock);
3036 msb_divisor_value = desired_divisor / iclk_pi_range;
3037 pi_value = desired_divisor % iclk_pi_range;
3040 divsel = msb_divisor_value - 2;
3041 phaseinc = pi_value;
3044 /* This should not happen with any sane values */
3045 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
3046 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
3047 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
3048 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
3050 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
3057 /* Program SSCDIVINTPHASE6 */
3058 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3059 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
3060 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
3061 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
3062 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
3063 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
3064 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
3065 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
3067 /* Program SSCAUXDIV */
3068 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3069 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
3070 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
3071 intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
3073 /* Enable modulator and associated divider */
3074 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3075 temp &= ~SBI_SSCCTL_DISABLE;
3076 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3078 /* Wait for initialization time */
3081 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
3083 mutex_unlock(&dev_priv->dpio_lock);
3087 * Enable PCH resources required for PCH ports:
3089 * - FDI training & RX/TX
3090 * - update transcoder timings
3091 * - DP transcoding bits
3094 static void ironlake_pch_enable(struct drm_crtc *crtc)
3096 struct drm_device *dev = crtc->dev;
3097 struct drm_i915_private *dev_priv = dev->dev_private;
3098 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3099 int pipe = intel_crtc->pipe;
3102 assert_transcoder_disabled(dev_priv, pipe);
3104 /* Write the TU size bits before fdi link training, so that error
3105 * detection works. */
3106 I915_WRITE(FDI_RX_TUSIZE1(pipe),
3107 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
3109 /* For PCH output, training FDI link */
3110 dev_priv->display.fdi_link_train(crtc);
3112 /* XXX: pch pll's can be enabled any time before we enable the PCH
3113 * transcoder, and we actually should do this to not upset any PCH
3114 * transcoder that already use the clock when we share it.
3116 * Note that enable_pch_pll tries to do the right thing, but get_pch_pll
3117 * unconditionally resets the pll - we need that to have the right LVDS
3118 * enable sequence. */
3119 ironlake_enable_pch_pll(intel_crtc);
3121 if (HAS_PCH_CPT(dev)) {
3124 temp = I915_READ(PCH_DPLL_SEL);
3128 temp |= TRANSA_DPLL_ENABLE;
3129 sel = TRANSA_DPLLB_SEL;
3132 temp |= TRANSB_DPLL_ENABLE;
3133 sel = TRANSB_DPLLB_SEL;
3136 temp |= TRANSC_DPLL_ENABLE;
3137 sel = TRANSC_DPLLB_SEL;
3140 if (intel_crtc->pch_pll->pll_reg == _PCH_DPLL_B)
3144 I915_WRITE(PCH_DPLL_SEL, temp);
3147 /* set transcoder timing, panel must allow it */
3148 assert_panel_unlocked(dev_priv, pipe);
3149 I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
3150 I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
3151 I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe)));
3153 I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
3154 I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
3155 I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
3156 I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe)));
3158 intel_fdi_normal_train(crtc);
3160 /* For PCH DP, enable TRANS_DP_CTL */
3161 if (HAS_PCH_CPT(dev) &&
3162 (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
3163 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
3164 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
3165 reg = TRANS_DP_CTL(pipe);
3166 temp = I915_READ(reg);
3167 temp &= ~(TRANS_DP_PORT_SEL_MASK |
3168 TRANS_DP_SYNC_MASK |
3170 temp |= (TRANS_DP_OUTPUT_ENABLE |
3171 TRANS_DP_ENH_FRAMING);
3172 temp |= bpc << 9; /* same format but at 11:9 */
3174 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
3175 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
3176 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
3177 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
3179 switch (intel_trans_dp_port_sel(crtc)) {
3181 temp |= TRANS_DP_PORT_SEL_B;
3184 temp |= TRANS_DP_PORT_SEL_C;
3187 temp |= TRANS_DP_PORT_SEL_D;
3193 I915_WRITE(reg, temp);
3196 ironlake_enable_pch_transcoder(dev_priv, pipe);
3199 static void lpt_pch_enable(struct drm_crtc *crtc)
3201 struct drm_device *dev = crtc->dev;
3202 struct drm_i915_private *dev_priv = dev->dev_private;
3203 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3204 enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
3206 assert_transcoder_disabled(dev_priv, TRANSCODER_A);
3208 lpt_program_iclkip(crtc);
3210 /* Set transcoder timing. */
3211 I915_WRITE(_TRANS_HTOTAL_A, I915_READ(HTOTAL(cpu_transcoder)));
3212 I915_WRITE(_TRANS_HBLANK_A, I915_READ(HBLANK(cpu_transcoder)));
3213 I915_WRITE(_TRANS_HSYNC_A, I915_READ(HSYNC(cpu_transcoder)));
3215 I915_WRITE(_TRANS_VTOTAL_A, I915_READ(VTOTAL(cpu_transcoder)));
3216 I915_WRITE(_TRANS_VBLANK_A, I915_READ(VBLANK(cpu_transcoder)));
3217 I915_WRITE(_TRANS_VSYNC_A, I915_READ(VSYNC(cpu_transcoder)));
3218 I915_WRITE(_TRANS_VSYNCSHIFT_A, I915_READ(VSYNCSHIFT(cpu_transcoder)));
3220 lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
3223 static void intel_put_pch_pll(struct intel_crtc *intel_crtc)
3225 struct intel_pch_pll *pll = intel_crtc->pch_pll;
3230 if (pll->refcount == 0) {
3231 WARN(1, "bad PCH PLL refcount\n");
3236 intel_crtc->pch_pll = NULL;
3239 static struct intel_pch_pll *intel_get_pch_pll(struct intel_crtc *intel_crtc, u32 dpll, u32 fp)
3241 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
3242 struct intel_pch_pll *pll;
3245 pll = intel_crtc->pch_pll;
3247 DRM_DEBUG_KMS("CRTC:%d reusing existing PCH PLL %x\n",
3248 intel_crtc->base.base.id, pll->pll_reg);
3252 if (HAS_PCH_IBX(dev_priv->dev)) {
3253 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
3254 i = intel_crtc->pipe;
3255 pll = &dev_priv->pch_plls[i];
3257 DRM_DEBUG_KMS("CRTC:%d using pre-allocated PCH PLL %x\n",
3258 intel_crtc->base.base.id, pll->pll_reg);
3263 for (i = 0; i < dev_priv->num_pch_pll; i++) {
3264 pll = &dev_priv->pch_plls[i];
3266 /* Only want to check enabled timings first */
3267 if (pll->refcount == 0)
3270 if (dpll == (I915_READ(pll->pll_reg) & 0x7fffffff) &&
3271 fp == I915_READ(pll->fp0_reg)) {
3272 DRM_DEBUG_KMS("CRTC:%d sharing existing PCH PLL %x (refcount %d, ative %d)\n",
3273 intel_crtc->base.base.id,
3274 pll->pll_reg, pll->refcount, pll->active);
3280 /* Ok no matching timings, maybe there's a free one? */
3281 for (i = 0; i < dev_priv->num_pch_pll; i++) {
3282 pll = &dev_priv->pch_plls[i];
3283 if (pll->refcount == 0) {
3284 DRM_DEBUG_KMS("CRTC:%d allocated PCH PLL %x\n",
3285 intel_crtc->base.base.id, pll->pll_reg);
3293 intel_crtc->pch_pll = pll;
3295 DRM_DEBUG_DRIVER("using pll %d for pipe %d\n", i, intel_crtc->pipe);
3296 prepare: /* separate function? */
3297 DRM_DEBUG_DRIVER("switching PLL %x off\n", pll->pll_reg);
3299 /* Wait for the clocks to stabilize before rewriting the regs */
3300 I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE);
3301 POSTING_READ(pll->pll_reg);
3304 I915_WRITE(pll->fp0_reg, fp);
3305 I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE);
3310 void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
3312 struct drm_i915_private *dev_priv = dev->dev_private;
3313 int dslreg = PIPEDSL(pipe);
3316 temp = I915_READ(dslreg);
3318 if (wait_for(I915_READ(dslreg) != temp, 5)) {
3319 if (wait_for(I915_READ(dslreg) != temp, 5))
3320 DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
3324 static void ironlake_crtc_enable(struct drm_crtc *crtc)
3326 struct drm_device *dev = crtc->dev;
3327 struct drm_i915_private *dev_priv = dev->dev_private;
3328 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3329 struct intel_encoder *encoder;
3330 int pipe = intel_crtc->pipe;
3331 int plane = intel_crtc->plane;
3334 WARN_ON(!crtc->enabled);
3336 if (intel_crtc->active)
3339 intel_crtc->active = true;
3340 intel_update_watermarks(dev);
3342 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
3343 temp = I915_READ(PCH_LVDS);
3344 if ((temp & LVDS_PORT_EN) == 0)
3345 I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
3349 if (intel_crtc->config.has_pch_encoder) {
3350 /* Note: FDI PLL enabling _must_ be done before we enable the
3351 * cpu pipes, hence this is separate from all the other fdi/pch
3353 ironlake_fdi_pll_enable(intel_crtc);
3355 assert_fdi_tx_disabled(dev_priv, pipe);
3356 assert_fdi_rx_disabled(dev_priv, pipe);
3359 for_each_encoder_on_crtc(dev, crtc, encoder)
3360 if (encoder->pre_enable)
3361 encoder->pre_enable(encoder);
3363 /* Enable panel fitting for LVDS */
3364 if (dev_priv->pch_pf_size &&
3365 (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
3366 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
3367 /* Force use of hard-coded filter coefficients
3368 * as some pre-programmed values are broken,
3371 if (IS_IVYBRIDGE(dev))
3372 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
3373 PF_PIPE_SEL_IVB(pipe));
3375 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3376 I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
3377 I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
3381 * On ILK+ LUT must be loaded before the pipe is running but with
3384 intel_crtc_load_lut(crtc);
3386 intel_enable_pipe(dev_priv, pipe,
3387 intel_crtc->config.has_pch_encoder);
3388 intel_enable_plane(dev_priv, plane, pipe);
3390 if (intel_crtc->config.has_pch_encoder)
3391 ironlake_pch_enable(crtc);
3393 mutex_lock(&dev->struct_mutex);
3394 intel_update_fbc(dev);
3395 mutex_unlock(&dev->struct_mutex);
3397 intel_crtc_update_cursor(crtc, true);
3399 for_each_encoder_on_crtc(dev, crtc, encoder)
3400 encoder->enable(encoder);
3402 if (HAS_PCH_CPT(dev))
3403 intel_cpt_verify_modeset(dev, intel_crtc->pipe);
3406 * There seems to be a race in PCH platform hw (at least on some
3407 * outputs) where an enabled pipe still completes any pageflip right
3408 * away (as if the pipe is off) instead of waiting for vblank. As soon
3409 * as the first vblank happend, everything works as expected. Hence just
3410 * wait for one vblank before returning to avoid strange things
3413 intel_wait_for_vblank(dev, intel_crtc->pipe);
3416 static void haswell_crtc_enable(struct drm_crtc *crtc)
3418 struct drm_device *dev = crtc->dev;
3419 struct drm_i915_private *dev_priv = dev->dev_private;
3420 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3421 struct intel_encoder *encoder;
3422 int pipe = intel_crtc->pipe;
3423 int plane = intel_crtc->plane;
3425 WARN_ON(!crtc->enabled);
3427 if (intel_crtc->active)
3430 intel_crtc->active = true;
3431 intel_update_watermarks(dev);
3433 if (intel_crtc->config.has_pch_encoder)
3434 dev_priv->display.fdi_link_train(crtc);
3436 for_each_encoder_on_crtc(dev, crtc, encoder)
3437 if (encoder->pre_enable)
3438 encoder->pre_enable(encoder);
3440 intel_ddi_enable_pipe_clock(intel_crtc);
3442 /* Enable panel fitting for eDP */
3443 if (dev_priv->pch_pf_size &&
3444 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
3445 /* Force use of hard-coded filter coefficients
3446 * as some pre-programmed values are broken,
3449 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
3450 PF_PIPE_SEL_IVB(pipe));
3451 I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
3452 I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
3456 * On ILK+ LUT must be loaded before the pipe is running but with
3459 intel_crtc_load_lut(crtc);
3461 intel_ddi_set_pipe_settings(crtc);
3462 intel_ddi_enable_transcoder_func(crtc);
3464 intel_enable_pipe(dev_priv, pipe,
3465 intel_crtc->config.has_pch_encoder);
3466 intel_enable_plane(dev_priv, plane, pipe);
3468 if (intel_crtc->config.has_pch_encoder)
3469 lpt_pch_enable(crtc);
3471 mutex_lock(&dev->struct_mutex);
3472 intel_update_fbc(dev);
3473 mutex_unlock(&dev->struct_mutex);
3475 intel_crtc_update_cursor(crtc, true);
3477 for_each_encoder_on_crtc(dev, crtc, encoder)
3478 encoder->enable(encoder);
3481 * There seems to be a race in PCH platform hw (at least on some
3482 * outputs) where an enabled pipe still completes any pageflip right
3483 * away (as if the pipe is off) instead of waiting for vblank. As soon
3484 * as the first vblank happend, everything works as expected. Hence just
3485 * wait for one vblank before returning to avoid strange things
3488 intel_wait_for_vblank(dev, intel_crtc->pipe);
3491 static void ironlake_crtc_disable(struct drm_crtc *crtc)
3493 struct drm_device *dev = crtc->dev;
3494 struct drm_i915_private *dev_priv = dev->dev_private;
3495 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3496 struct intel_encoder *encoder;
3497 int pipe = intel_crtc->pipe;
3498 int plane = intel_crtc->plane;
3502 if (!intel_crtc->active)
3505 for_each_encoder_on_crtc(dev, crtc, encoder)
3506 encoder->disable(encoder);
3508 intel_crtc_wait_for_pending_flips(crtc);
3509 drm_vblank_off(dev, pipe);
3510 intel_crtc_update_cursor(crtc, false);
3512 intel_disable_plane(dev_priv, plane, pipe);
3514 if (dev_priv->cfb_plane == plane)
3515 intel_disable_fbc(dev);
3517 intel_disable_pipe(dev_priv, pipe);
3520 I915_WRITE(PF_CTL(pipe), 0);
3521 I915_WRITE(PF_WIN_SZ(pipe), 0);
3523 for_each_encoder_on_crtc(dev, crtc, encoder)
3524 if (encoder->post_disable)
3525 encoder->post_disable(encoder);
3527 ironlake_fdi_disable(crtc);
3529 ironlake_disable_pch_transcoder(dev_priv, pipe);
3531 if (HAS_PCH_CPT(dev)) {
3532 /* disable TRANS_DP_CTL */
3533 reg = TRANS_DP_CTL(pipe);
3534 temp = I915_READ(reg);
3535 temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
3536 temp |= TRANS_DP_PORT_SEL_NONE;
3537 I915_WRITE(reg, temp);
3539 /* disable DPLL_SEL */
3540 temp = I915_READ(PCH_DPLL_SEL);
3543 temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
3546 temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
3549 /* C shares PLL A or B */
3550 temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
3555 I915_WRITE(PCH_DPLL_SEL, temp);
3558 /* disable PCH DPLL */
3559 intel_disable_pch_pll(intel_crtc);
3561 ironlake_fdi_pll_disable(intel_crtc);
3563 intel_crtc->active = false;
3564 intel_update_watermarks(dev);
3566 mutex_lock(&dev->struct_mutex);
3567 intel_update_fbc(dev);
3568 mutex_unlock(&dev->struct_mutex);
3571 static void haswell_crtc_disable(struct drm_crtc *crtc)
3573 struct drm_device *dev = crtc->dev;
3574 struct drm_i915_private *dev_priv = dev->dev_private;
3575 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3576 struct intel_encoder *encoder;
3577 int pipe = intel_crtc->pipe;
3578 int plane = intel_crtc->plane;
3579 enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
3581 if (!intel_crtc->active)
3584 for_each_encoder_on_crtc(dev, crtc, encoder)
3585 encoder->disable(encoder);
3587 intel_crtc_wait_for_pending_flips(crtc);
3588 drm_vblank_off(dev, pipe);
3589 intel_crtc_update_cursor(crtc, false);
3591 intel_disable_plane(dev_priv, plane, pipe);
3593 if (dev_priv->cfb_plane == plane)
3594 intel_disable_fbc(dev);
3596 intel_disable_pipe(dev_priv, pipe);
3598 intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
3601 I915_WRITE(PF_CTL(pipe), 0);
3602 I915_WRITE(PF_WIN_SZ(pipe), 0);
3604 intel_ddi_disable_pipe_clock(intel_crtc);
3606 for_each_encoder_on_crtc(dev, crtc, encoder)
3607 if (encoder->post_disable)
3608 encoder->post_disable(encoder);
3610 if (intel_crtc->config.has_pch_encoder) {
3611 lpt_disable_pch_transcoder(dev_priv);
3612 intel_ddi_fdi_disable(crtc);
3615 intel_crtc->active = false;
3616 intel_update_watermarks(dev);
3618 mutex_lock(&dev->struct_mutex);
3619 intel_update_fbc(dev);
3620 mutex_unlock(&dev->struct_mutex);
3623 static void ironlake_crtc_off(struct drm_crtc *crtc)
3625 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3626 intel_put_pch_pll(intel_crtc);
3629 static void haswell_crtc_off(struct drm_crtc *crtc)
3631 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3633 /* Stop saying we're using TRANSCODER_EDP because some other CRTC might
3634 * start using it. */
3635 intel_crtc->cpu_transcoder = (enum transcoder) intel_crtc->pipe;
3637 intel_ddi_put_crtc_pll(crtc);
3640 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
3642 if (!enable && intel_crtc->overlay) {
3643 struct drm_device *dev = intel_crtc->base.dev;
3644 struct drm_i915_private *dev_priv = dev->dev_private;
3646 mutex_lock(&dev->struct_mutex);
3647 dev_priv->mm.interruptible = false;
3648 (void) intel_overlay_switch_off(intel_crtc->overlay);
3649 dev_priv->mm.interruptible = true;
3650 mutex_unlock(&dev->struct_mutex);
3653 /* Let userspace switch the overlay on again. In most cases userspace
3654 * has to recompute where to put it anyway.
3659 * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
3660 * cursor plane briefly if not already running after enabling the display
3662 * This workaround avoids occasional blank screens when self refresh is
3666 g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
3668 u32 cntl = I915_READ(CURCNTR(pipe));
3670 if ((cntl & CURSOR_MODE) == 0) {
3671 u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
3673 I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
3674 I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
3675 intel_wait_for_vblank(dev_priv->dev, pipe);
3676 I915_WRITE(CURCNTR(pipe), cntl);
3677 I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
3678 I915_WRITE(FW_BLC_SELF, fw_bcl_self);
3682 static void i9xx_crtc_enable(struct drm_crtc *crtc)
3684 struct drm_device *dev = crtc->dev;
3685 struct drm_i915_private *dev_priv = dev->dev_private;
3686 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3687 struct intel_encoder *encoder;
3688 int pipe = intel_crtc->pipe;
3689 int plane = intel_crtc->plane;
3691 WARN_ON(!crtc->enabled);
3693 if (intel_crtc->active)
3696 intel_crtc->active = true;
3697 intel_update_watermarks(dev);
3699 intel_enable_pll(dev_priv, pipe);
3701 for_each_encoder_on_crtc(dev, crtc, encoder)
3702 if (encoder->pre_enable)
3703 encoder->pre_enable(encoder);
3705 intel_enable_pipe(dev_priv, pipe, false);
3706 intel_enable_plane(dev_priv, plane, pipe);
3708 g4x_fixup_plane(dev_priv, pipe);
3710 intel_crtc_load_lut(crtc);
3711 intel_update_fbc(dev);
3713 /* Give the overlay scaler a chance to enable if it's on this pipe */
3714 intel_crtc_dpms_overlay(intel_crtc, true);
3715 intel_crtc_update_cursor(crtc, true);
3717 for_each_encoder_on_crtc(dev, crtc, encoder)
3718 encoder->enable(encoder);
3721 static void i9xx_crtc_disable(struct drm_crtc *crtc)
3723 struct drm_device *dev = crtc->dev;
3724 struct drm_i915_private *dev_priv = dev->dev_private;
3725 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3726 struct intel_encoder *encoder;
3727 int pipe = intel_crtc->pipe;
3728 int plane = intel_crtc->plane;
3732 if (!intel_crtc->active)
3735 for_each_encoder_on_crtc(dev, crtc, encoder)
3736 encoder->disable(encoder);
3738 /* Give the overlay scaler a chance to disable if it's on this pipe */
3739 intel_crtc_wait_for_pending_flips(crtc);
3740 drm_vblank_off(dev, pipe);
3741 intel_crtc_dpms_overlay(intel_crtc, false);
3742 intel_crtc_update_cursor(crtc, false);
3744 if (dev_priv->cfb_plane == plane)
3745 intel_disable_fbc(dev);
3747 intel_disable_plane(dev_priv, plane, pipe);
3748 intel_disable_pipe(dev_priv, pipe);
3750 /* Disable pannel fitter if it is on this pipe. */
3751 pctl = I915_READ(PFIT_CONTROL);
3752 if ((pctl & PFIT_ENABLE) &&
3753 ((pctl & PFIT_PIPE_MASK) >> PFIT_PIPE_SHIFT) == pipe)
3754 I915_WRITE(PFIT_CONTROL, 0);
3756 intel_disable_pll(dev_priv, pipe);
3758 intel_crtc->active = false;
3759 intel_update_fbc(dev);
3760 intel_update_watermarks(dev);
3763 static void i9xx_crtc_off(struct drm_crtc *crtc)
3767 static void intel_crtc_update_sarea(struct drm_crtc *crtc,
3770 struct drm_device *dev = crtc->dev;
3771 struct drm_i915_master_private *master_priv;
3772 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3773 int pipe = intel_crtc->pipe;
3775 if (!dev->primary->master)
3778 master_priv = dev->primary->master->driver_priv;
3779 if (!master_priv->sarea_priv)
3784 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
3785 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
3788 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
3789 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
3792 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
3798 * Sets the power management mode of the pipe and plane.
3800 void intel_crtc_update_dpms(struct drm_crtc *crtc)
3802 struct drm_device *dev = crtc->dev;
3803 struct drm_i915_private *dev_priv = dev->dev_private;
3804 struct intel_encoder *intel_encoder;
3805 bool enable = false;
3807 for_each_encoder_on_crtc(dev, crtc, intel_encoder)
3808 enable |= intel_encoder->connectors_active;
3811 dev_priv->display.crtc_enable(crtc);
3813 dev_priv->display.crtc_disable(crtc);
3815 intel_crtc_update_sarea(crtc, enable);
3818 static void intel_crtc_disable(struct drm_crtc *crtc)
3820 struct drm_device *dev = crtc->dev;
3821 struct drm_connector *connector;
3822 struct drm_i915_private *dev_priv = dev->dev_private;
3823 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3825 /* crtc should still be enabled when we disable it. */
3826 WARN_ON(!crtc->enabled);
3828 intel_crtc->eld_vld = false;
3829 dev_priv->display.crtc_disable(crtc);
3830 intel_crtc_update_sarea(crtc, false);
3831 dev_priv->display.off(crtc);
3833 assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
3834 assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
3837 mutex_lock(&dev->struct_mutex);
3838 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
3839 mutex_unlock(&dev->struct_mutex);
3843 /* Update computed state. */
3844 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
3845 if (!connector->encoder || !connector->encoder->crtc)
3848 if (connector->encoder->crtc != crtc)
3851 connector->dpms = DRM_MODE_DPMS_OFF;
3852 to_intel_encoder(connector->encoder)->connectors_active = false;
3856 void intel_modeset_disable(struct drm_device *dev)
3858 struct drm_crtc *crtc;
3860 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3862 intel_crtc_disable(crtc);
3866 void intel_encoder_destroy(struct drm_encoder *encoder)
3868 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
3870 drm_encoder_cleanup(encoder);
3871 kfree(intel_encoder);
3874 /* Simple dpms helper for encodres with just one connector, no cloning and only
3875 * one kind of off state. It clamps all !ON modes to fully OFF and changes the
3876 * state of the entire output pipe. */
3877 void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
3879 if (mode == DRM_MODE_DPMS_ON) {
3880 encoder->connectors_active = true;
3882 intel_crtc_update_dpms(encoder->base.crtc);
3884 encoder->connectors_active = false;
3886 intel_crtc_update_dpms(encoder->base.crtc);
3890 /* Cross check the actual hw state with our own modeset state tracking (and it's
3891 * internal consistency). */
3892 static void intel_connector_check_state(struct intel_connector *connector)
3894 if (connector->get_hw_state(connector)) {
3895 struct intel_encoder *encoder = connector->encoder;
3896 struct drm_crtc *crtc;
3897 bool encoder_enabled;
3900 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
3901 connector->base.base.id,
3902 drm_get_connector_name(&connector->base));
3904 WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
3905 "wrong connector dpms state\n");
3906 WARN(connector->base.encoder != &encoder->base,
3907 "active connector not linked to encoder\n");
3908 WARN(!encoder->connectors_active,
3909 "encoder->connectors_active not set\n");
3911 encoder_enabled = encoder->get_hw_state(encoder, &pipe);
3912 WARN(!encoder_enabled, "encoder not enabled\n");
3913 if (WARN_ON(!encoder->base.crtc))
3916 crtc = encoder->base.crtc;
3918 WARN(!crtc->enabled, "crtc not enabled\n");
3919 WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
3920 WARN(pipe != to_intel_crtc(crtc)->pipe,
3921 "encoder active on the wrong pipe\n");
3925 /* Even simpler default implementation, if there's really no special case to
3927 void intel_connector_dpms(struct drm_connector *connector, int mode)
3929 struct intel_encoder *encoder = intel_attached_encoder(connector);
3931 /* All the simple cases only support two dpms states. */
3932 if (mode != DRM_MODE_DPMS_ON)
3933 mode = DRM_MODE_DPMS_OFF;
3935 if (mode == connector->dpms)
3938 connector->dpms = mode;
3940 /* Only need to change hw state when actually enabled */
3941 if (encoder->base.crtc)
3942 intel_encoder_dpms(encoder, mode);
3944 WARN_ON(encoder->connectors_active != false);
3946 intel_modeset_check_state(connector->dev);
3949 /* Simple connector->get_hw_state implementation for encoders that support only
3950 * one connector and no cloning and hence the encoder state determines the state
3951 * of the connector. */
3952 bool intel_connector_get_hw_state(struct intel_connector *connector)
3955 struct intel_encoder *encoder = connector->encoder;
3957 return encoder->get_hw_state(encoder, &pipe);
3960 static bool intel_crtc_compute_config(struct drm_crtc *crtc,
3961 struct intel_crtc_config *pipe_config)
3963 struct drm_device *dev = crtc->dev;
3964 struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
3966 if (HAS_PCH_SPLIT(dev)) {
3967 /* FDI link clock is fixed at 2.7G */
3968 if (pipe_config->requested_mode.clock * 3
3969 > IRONLAKE_FDI_FREQ * 4)
3973 /* All interlaced capable intel hw wants timings in frames. Note though
3974 * that intel_lvds_mode_fixup does some funny tricks with the crtc
3975 * timings, so we need to be careful not to clobber these.*/
3976 if (!pipe_config->timings_set)
3977 drm_mode_set_crtcinfo(adjusted_mode, 0);
3979 /* WaPruneModeWithIncorrectHsyncOffset: Cantiga+ cannot handle modes
3980 * with a hsync front porch of 0.
3982 if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
3983 adjusted_mode->hsync_start == adjusted_mode->hdisplay)
3986 if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10) {
3987 pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */
3988 } else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8) {
3989 /* only a 8bpc pipe, with 6bpc dither through the panel fitter
3991 pipe_config->pipe_bpp = 8*3;
3997 static int valleyview_get_display_clock_speed(struct drm_device *dev)
3999 return 400000; /* FIXME */
4002 static int i945_get_display_clock_speed(struct drm_device *dev)
4007 static int i915_get_display_clock_speed(struct drm_device *dev)
4012 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
4017 static int i915gm_get_display_clock_speed(struct drm_device *dev)
4021 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
4023 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
4026 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
4027 case GC_DISPLAY_CLOCK_333_MHZ:
4030 case GC_DISPLAY_CLOCK_190_200_MHZ:
4036 static int i865_get_display_clock_speed(struct drm_device *dev)
4041 static int i855_get_display_clock_speed(struct drm_device *dev)
4044 /* Assume that the hardware is in the high speed state. This
4045 * should be the default.
4047 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
4048 case GC_CLOCK_133_200:
4049 case GC_CLOCK_100_200:
4051 case GC_CLOCK_166_250:
4053 case GC_CLOCK_100_133:
4057 /* Shouldn't happen */
4061 static int i830_get_display_clock_speed(struct drm_device *dev)
4067 intel_reduce_ratio(uint32_t *num, uint32_t *den)
4069 while (*num > 0xffffff || *den > 0xffffff) {
4076 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
4077 int pixel_clock, int link_clock,
4078 struct intel_link_m_n *m_n)
4081 m_n->gmch_m = bits_per_pixel * pixel_clock;
4082 m_n->gmch_n = link_clock * nlanes * 8;
4083 intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
4084 m_n->link_m = pixel_clock;
4085 m_n->link_n = link_clock;
4086 intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
4089 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
4091 if (i915_panel_use_ssc >= 0)
4092 return i915_panel_use_ssc != 0;
4093 return dev_priv->lvds_use_ssc
4094 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
4097 static int vlv_get_refclk(struct drm_crtc *crtc)
4099 struct drm_device *dev = crtc->dev;
4100 struct drm_i915_private *dev_priv = dev->dev_private;
4101 int refclk = 27000; /* for DP & HDMI */
4103 return 100000; /* only one validated so far */
4105 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
4107 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
4108 if (intel_panel_use_ssc(dev_priv))
4112 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
4119 static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
4121 struct drm_device *dev = crtc->dev;
4122 struct drm_i915_private *dev_priv = dev->dev_private;
4125 if (IS_VALLEYVIEW(dev)) {
4126 refclk = vlv_get_refclk(crtc);
4127 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4128 intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
4129 refclk = dev_priv->lvds_ssc_freq * 1000;
4130 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
4132 } else if (!IS_GEN2(dev)) {
4141 static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc *crtc)
4143 unsigned dotclock = crtc->config.adjusted_mode.clock;
4144 struct dpll *clock = &crtc->config.dpll;
4146 /* SDVO TV has fixed PLL values depend on its clock range,
4147 this mirrors vbios setting. */
4148 if (dotclock >= 100000 && dotclock < 140500) {
4154 } else if (dotclock >= 140500 && dotclock <= 200000) {
4162 crtc->config.clock_set = true;
4165 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
4166 intel_clock_t *reduced_clock)
4168 struct drm_device *dev = crtc->base.dev;
4169 struct drm_i915_private *dev_priv = dev->dev_private;
4170 int pipe = crtc->pipe;
4172 struct dpll *clock = &crtc->config.dpll;
4174 if (IS_PINEVIEW(dev)) {
4175 fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
4177 fp2 = (1 << reduced_clock->n) << 16 |
4178 reduced_clock->m1 << 8 | reduced_clock->m2;
4180 fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
4182 fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
4186 I915_WRITE(FP0(pipe), fp);
4188 crtc->lowfreq_avail = false;
4189 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4190 reduced_clock && i915_powersave) {
4191 I915_WRITE(FP1(pipe), fp2);
4192 crtc->lowfreq_avail = true;
4194 I915_WRITE(FP1(pipe), fp);
4198 static void intel_dp_set_m_n(struct intel_crtc *crtc)
4200 if (crtc->config.has_pch_encoder)
4201 intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
4203 intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
4206 static void vlv_update_pll(struct intel_crtc *crtc)
4208 struct drm_device *dev = crtc->base.dev;
4209 struct drm_i915_private *dev_priv = dev->dev_private;
4210 int pipe = crtc->pipe;
4211 u32 dpll, mdiv, pdiv;
4212 u32 bestn, bestm1, bestm2, bestp1, bestp2;
4216 mutex_lock(&dev_priv->dpio_lock);
4218 is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
4219 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
4221 dpll = DPLL_VGA_MODE_DIS;
4222 dpll |= DPLL_EXT_BUFFER_ENABLE_VLV;
4223 dpll |= DPLL_REFA_CLK_ENABLE_VLV;
4224 dpll |= DPLL_INTEGRATED_CLOCK_VLV;
4226 I915_WRITE(DPLL(pipe), dpll);
4227 POSTING_READ(DPLL(pipe));
4229 bestn = crtc->config.dpll.n;
4230 bestm1 = crtc->config.dpll.m1;
4231 bestm2 = crtc->config.dpll.m2;
4232 bestp1 = crtc->config.dpll.p1;
4233 bestp2 = crtc->config.dpll.p2;
4236 * In Valleyview PLL and program lane counter registers are exposed
4237 * through DPIO interface
4239 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
4240 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
4241 mdiv |= ((bestn << DPIO_N_SHIFT));
4242 mdiv |= (1 << DPIO_POST_DIV_SHIFT);
4243 mdiv |= (1 << DPIO_K_SHIFT);
4244 mdiv |= DPIO_ENABLE_CALIBRATION;
4245 intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
4247 intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), 0x01000000);
4249 pdiv = (1 << DPIO_REFSEL_OVERRIDE) | (5 << DPIO_PLL_MODESEL_SHIFT) |
4250 (3 << DPIO_BIAS_CURRENT_CTL_SHIFT) | (1<<20) |
4251 (7 << DPIO_PLL_REFCLK_SEL_SHIFT) | (8 << DPIO_DRIVER_CTL_SHIFT) |
4252 (5 << DPIO_CLK_BIAS_CTL_SHIFT);
4253 intel_dpio_write(dev_priv, DPIO_REFSFR(pipe), pdiv);
4255 intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x005f003b);
4257 dpll |= DPLL_VCO_ENABLE;
4258 I915_WRITE(DPLL(pipe), dpll);
4259 POSTING_READ(DPLL(pipe));
4260 if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
4261 DRM_ERROR("DPLL %d failed to lock\n", pipe);
4263 intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x620);
4265 if (crtc->config.has_dp_encoder)
4266 intel_dp_set_m_n(crtc);
4268 I915_WRITE(DPLL(pipe), dpll);
4270 /* Wait for the clocks to stabilize. */
4271 POSTING_READ(DPLL(pipe));
4277 if (crtc->config.pixel_multiplier > 1) {
4278 temp = (crtc->config.pixel_multiplier - 1)
4279 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4282 I915_WRITE(DPLL_MD(pipe), temp);
4283 POSTING_READ(DPLL_MD(pipe));
4285 /* Now program lane control registers */
4286 if(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)
4287 || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI)) {
4291 intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL1, temp);
4294 if(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP)) {
4298 intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL2, temp);
4301 mutex_unlock(&dev_priv->dpio_lock);
4304 static void i9xx_update_pll(struct intel_crtc *crtc,
4305 intel_clock_t *reduced_clock,
4308 struct drm_device *dev = crtc->base.dev;
4309 struct drm_i915_private *dev_priv = dev->dev_private;
4310 struct intel_encoder *encoder;
4311 int pipe = crtc->pipe;
4314 struct dpll *clock = &crtc->config.dpll;
4316 i9xx_update_pll_dividers(crtc, reduced_clock);
4318 is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
4319 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
4321 dpll = DPLL_VGA_MODE_DIS;
4323 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
4324 dpll |= DPLLB_MODE_LVDS;
4326 dpll |= DPLLB_MODE_DAC_SERIAL;
4329 if ((crtc->config.pixel_multiplier > 1) &&
4330 (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))) {
4331 dpll |= (crtc->config.pixel_multiplier - 1)
4332 << SDVO_MULTIPLIER_SHIFT_HIRES;
4334 dpll |= DPLL_DVO_HIGH_SPEED;
4336 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
4337 dpll |= DPLL_DVO_HIGH_SPEED;
4339 /* compute bitmask from p1 value */
4340 if (IS_PINEVIEW(dev))
4341 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
4343 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4344 if (IS_G4X(dev) && reduced_clock)
4345 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
4347 switch (clock->p2) {
4349 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
4352 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
4355 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
4358 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
4361 if (INTEL_INFO(dev)->gen >= 4)
4362 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
4364 if (is_sdvo && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT))
4365 dpll |= PLL_REF_INPUT_TVCLKINBC;
4366 else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT))
4367 /* XXX: just matching BIOS for now */
4368 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
4370 else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4371 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4372 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4374 dpll |= PLL_REF_INPUT_DREFCLK;
4376 dpll |= DPLL_VCO_ENABLE;
4377 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
4378 POSTING_READ(DPLL(pipe));
4381 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
4382 if (encoder->pre_pll_enable)
4383 encoder->pre_pll_enable(encoder);
4385 if (crtc->config.has_dp_encoder)
4386 intel_dp_set_m_n(crtc);
4388 I915_WRITE(DPLL(pipe), dpll);
4390 /* Wait for the clocks to stabilize. */
4391 POSTING_READ(DPLL(pipe));
4394 if (INTEL_INFO(dev)->gen >= 4) {
4398 if (crtc->config.pixel_multiplier > 1) {
4399 temp = (crtc->config.pixel_multiplier - 1)
4400 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4403 I915_WRITE(DPLL_MD(pipe), temp);
4405 /* The pixel multiplier can only be updated once the
4406 * DPLL is enabled and the clocks are stable.
4408 * So write it again.
4410 I915_WRITE(DPLL(pipe), dpll);
4414 static void i8xx_update_pll(struct intel_crtc *crtc,
4415 struct drm_display_mode *adjusted_mode,
4416 intel_clock_t *reduced_clock,
4419 struct drm_device *dev = crtc->base.dev;
4420 struct drm_i915_private *dev_priv = dev->dev_private;
4421 struct intel_encoder *encoder;
4422 int pipe = crtc->pipe;
4424 struct dpll *clock = &crtc->config.dpll;
4426 i9xx_update_pll_dividers(crtc, reduced_clock);
4428 dpll = DPLL_VGA_MODE_DIS;
4430 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
4431 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4434 dpll |= PLL_P1_DIVIDE_BY_TWO;
4436 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4438 dpll |= PLL_P2_DIVIDE_BY_4;
4441 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4442 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4443 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4445 dpll |= PLL_REF_INPUT_DREFCLK;
4447 dpll |= DPLL_VCO_ENABLE;
4448 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
4449 POSTING_READ(DPLL(pipe));
4452 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
4453 if (encoder->pre_pll_enable)
4454 encoder->pre_pll_enable(encoder);
4456 I915_WRITE(DPLL(pipe), dpll);
4458 /* Wait for the clocks to stabilize. */
4459 POSTING_READ(DPLL(pipe));
4462 /* The pixel multiplier can only be updated once the
4463 * DPLL is enabled and the clocks are stable.
4465 * So write it again.
4467 I915_WRITE(DPLL(pipe), dpll);
4470 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
4471 struct drm_display_mode *mode,
4472 struct drm_display_mode *adjusted_mode)
4474 struct drm_device *dev = intel_crtc->base.dev;
4475 struct drm_i915_private *dev_priv = dev->dev_private;
4476 enum pipe pipe = intel_crtc->pipe;
4477 enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
4478 uint32_t vsyncshift;
4480 if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
4481 /* the chip adds 2 halflines automatically */
4482 adjusted_mode->crtc_vtotal -= 1;
4483 adjusted_mode->crtc_vblank_end -= 1;
4484 vsyncshift = adjusted_mode->crtc_hsync_start
4485 - adjusted_mode->crtc_htotal / 2;
4490 if (INTEL_INFO(dev)->gen > 3)
4491 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
4493 I915_WRITE(HTOTAL(cpu_transcoder),
4494 (adjusted_mode->crtc_hdisplay - 1) |
4495 ((adjusted_mode->crtc_htotal - 1) << 16));
4496 I915_WRITE(HBLANK(cpu_transcoder),
4497 (adjusted_mode->crtc_hblank_start - 1) |
4498 ((adjusted_mode->crtc_hblank_end - 1) << 16));
4499 I915_WRITE(HSYNC(cpu_transcoder),
4500 (adjusted_mode->crtc_hsync_start - 1) |
4501 ((adjusted_mode->crtc_hsync_end - 1) << 16));
4503 I915_WRITE(VTOTAL(cpu_transcoder),
4504 (adjusted_mode->crtc_vdisplay - 1) |
4505 ((adjusted_mode->crtc_vtotal - 1) << 16));
4506 I915_WRITE(VBLANK(cpu_transcoder),
4507 (adjusted_mode->crtc_vblank_start - 1) |
4508 ((adjusted_mode->crtc_vblank_end - 1) << 16));
4509 I915_WRITE(VSYNC(cpu_transcoder),
4510 (adjusted_mode->crtc_vsync_start - 1) |
4511 ((adjusted_mode->crtc_vsync_end - 1) << 16));
4513 /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
4514 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
4515 * documented on the DDI_FUNC_CTL register description, EDP Input Select
4517 if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
4518 (pipe == PIPE_B || pipe == PIPE_C))
4519 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
4521 /* pipesrc controls the size that is scaled from, which should
4522 * always be the user's requested size.
4524 I915_WRITE(PIPESRC(pipe),
4525 ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
4528 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
4530 struct drm_device *dev = intel_crtc->base.dev;
4531 struct drm_i915_private *dev_priv = dev->dev_private;
4534 pipeconf = I915_READ(PIPECONF(intel_crtc->pipe));
4536 if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) {
4537 /* Enable pixel doubling when the dot clock is > 90% of the (display)
4540 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
4543 if (intel_crtc->config.requested_mode.clock >
4544 dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
4545 pipeconf |= PIPECONF_DOUBLE_WIDE;
4547 pipeconf &= ~PIPECONF_DOUBLE_WIDE;
4550 /* default to 8bpc */
4551 pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
4552 if (intel_crtc->config.has_dp_encoder) {
4553 if (intel_crtc->config.dither) {
4554 pipeconf |= PIPECONF_6BPC |
4555 PIPECONF_DITHER_EN |
4556 PIPECONF_DITHER_TYPE_SP;
4560 if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(&intel_crtc->base,
4561 INTEL_OUTPUT_EDP)) {
4562 if (intel_crtc->config.dither) {
4563 pipeconf |= PIPECONF_6BPC |
4565 I965_PIPECONF_ACTIVE;
4569 if (HAS_PIPE_CXSR(dev)) {
4570 if (intel_crtc->lowfreq_avail) {
4571 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
4572 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
4574 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
4575 pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
4579 pipeconf &= ~PIPECONF_INTERLACE_MASK;
4580 if (!IS_GEN2(dev) &&
4581 intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
4582 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
4584 pipeconf |= PIPECONF_PROGRESSIVE;
4586 if (IS_VALLEYVIEW(dev)) {
4587 if (intel_crtc->config.limited_color_range)
4588 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
4590 pipeconf &= ~PIPECONF_COLOR_RANGE_SELECT;
4593 I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
4594 POSTING_READ(PIPECONF(intel_crtc->pipe));
4597 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
4599 struct drm_framebuffer *fb)
4601 struct drm_device *dev = crtc->dev;
4602 struct drm_i915_private *dev_priv = dev->dev_private;
4603 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4604 struct drm_display_mode *adjusted_mode =
4605 &intel_crtc->config.adjusted_mode;
4606 struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
4607 int pipe = intel_crtc->pipe;
4608 int plane = intel_crtc->plane;
4609 int refclk, num_connectors = 0;
4610 intel_clock_t clock, reduced_clock;
4612 bool ok, has_reduced_clock = false, is_sdvo = false;
4613 bool is_lvds = false, is_tv = false;
4614 struct intel_encoder *encoder;
4615 const intel_limit_t *limit;
4618 for_each_encoder_on_crtc(dev, crtc, encoder) {
4619 switch (encoder->type) {
4620 case INTEL_OUTPUT_LVDS:
4623 case INTEL_OUTPUT_SDVO:
4624 case INTEL_OUTPUT_HDMI:
4626 if (encoder->needs_tv_clock)
4629 case INTEL_OUTPUT_TVOUT:
4637 refclk = i9xx_get_refclk(crtc, num_connectors);
4640 * Returns a set of divisors for the desired target clock with the given
4641 * refclk, or FALSE. The returned values represent the clock equation:
4642 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
4644 limit = intel_limit(crtc, refclk);
4645 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
4648 DRM_ERROR("Couldn't find PLL settings for mode!\n");
4652 /* Ensure that the cursor is valid for the new mode before changing... */
4653 intel_crtc_update_cursor(crtc, true);
4655 if (is_lvds && dev_priv->lvds_downclock_avail) {
4657 * Ensure we match the reduced clock's P to the target clock.
4658 * If the clocks don't match, we can't switch the display clock
4659 * by using the FP0/FP1. In such case we will disable the LVDS
4660 * downclock feature.
4662 has_reduced_clock = limit->find_pll(limit, crtc,
4663 dev_priv->lvds_downclock,
4668 /* Compat-code for transition, will disappear. */
4669 if (!intel_crtc->config.clock_set) {
4670 intel_crtc->config.dpll.n = clock.n;
4671 intel_crtc->config.dpll.m1 = clock.m1;
4672 intel_crtc->config.dpll.m2 = clock.m2;
4673 intel_crtc->config.dpll.p1 = clock.p1;
4674 intel_crtc->config.dpll.p2 = clock.p2;
4677 if (is_sdvo && is_tv)
4678 i9xx_adjust_sdvo_tv_clock(intel_crtc);
4681 i8xx_update_pll(intel_crtc, adjusted_mode,
4682 has_reduced_clock ? &reduced_clock : NULL,
4684 else if (IS_VALLEYVIEW(dev))
4685 vlv_update_pll(intel_crtc);
4687 i9xx_update_pll(intel_crtc,
4688 has_reduced_clock ? &reduced_clock : NULL,
4691 /* Set up the display plane register */
4692 dspcntr = DISPPLANE_GAMMA_ENABLE;
4694 if (!IS_VALLEYVIEW(dev)) {
4696 dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
4698 dspcntr |= DISPPLANE_SEL_PIPE_B;
4701 DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
4702 drm_mode_debug_printmodeline(mode);
4704 intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
4706 /* pipesrc and dspsize control the size that is scaled from,
4707 * which should always be the user's requested size.
4709 I915_WRITE(DSPSIZE(plane),
4710 ((mode->vdisplay - 1) << 16) |
4711 (mode->hdisplay - 1));
4712 I915_WRITE(DSPPOS(plane), 0);
4714 i9xx_set_pipeconf(intel_crtc);
4716 intel_enable_pipe(dev_priv, pipe, false);
4718 intel_wait_for_vblank(dev, pipe);
4720 I915_WRITE(DSPCNTR(plane), dspcntr);
4721 POSTING_READ(DSPCNTR(plane));
4723 ret = intel_pipe_set_base(crtc, x, y, fb);
4725 intel_update_watermarks(dev);
4730 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
4731 struct intel_crtc_config *pipe_config)
4733 struct drm_device *dev = crtc->base.dev;
4734 struct drm_i915_private *dev_priv = dev->dev_private;
4737 tmp = I915_READ(PIPECONF(crtc->pipe));
4738 if (!(tmp & PIPECONF_ENABLE))
4744 static void ironlake_init_pch_refclk(struct drm_device *dev)
4746 struct drm_i915_private *dev_priv = dev->dev_private;
4747 struct drm_mode_config *mode_config = &dev->mode_config;
4748 struct intel_encoder *encoder;
4750 bool has_lvds = false;
4751 bool has_cpu_edp = false;
4752 bool has_pch_edp = false;
4753 bool has_panel = false;
4754 bool has_ck505 = false;
4755 bool can_ssc = false;
4757 /* We need to take the global config into account */
4758 list_for_each_entry(encoder, &mode_config->encoder_list,
4760 switch (encoder->type) {
4761 case INTEL_OUTPUT_LVDS:
4765 case INTEL_OUTPUT_EDP:
4767 if (intel_encoder_is_pch_edp(&encoder->base))
4775 if (HAS_PCH_IBX(dev)) {
4776 has_ck505 = dev_priv->display_clock_mode;
4777 can_ssc = has_ck505;
4783 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
4784 has_panel, has_lvds, has_pch_edp, has_cpu_edp,
4787 /* Ironlake: try to setup display ref clock before DPLL
4788 * enabling. This is only under driver's control after
4789 * PCH B stepping, previous chipset stepping should be
4790 * ignoring this setting.
4792 val = I915_READ(PCH_DREF_CONTROL);
4794 /* As we must carefully and slowly disable/enable each source in turn,
4795 * compute the final state we want first and check if we need to
4796 * make any changes at all.
4799 final &= ~DREF_NONSPREAD_SOURCE_MASK;
4801 final |= DREF_NONSPREAD_CK505_ENABLE;
4803 final |= DREF_NONSPREAD_SOURCE_ENABLE;
4805 final &= ~DREF_SSC_SOURCE_MASK;
4806 final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4807 final &= ~DREF_SSC1_ENABLE;
4810 final |= DREF_SSC_SOURCE_ENABLE;
4812 if (intel_panel_use_ssc(dev_priv) && can_ssc)
4813 final |= DREF_SSC1_ENABLE;
4816 if (intel_panel_use_ssc(dev_priv) && can_ssc)
4817 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
4819 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
4821 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4823 final |= DREF_SSC_SOURCE_DISABLE;
4824 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4830 /* Always enable nonspread source */
4831 val &= ~DREF_NONSPREAD_SOURCE_MASK;
4834 val |= DREF_NONSPREAD_CK505_ENABLE;
4836 val |= DREF_NONSPREAD_SOURCE_ENABLE;
4839 val &= ~DREF_SSC_SOURCE_MASK;
4840 val |= DREF_SSC_SOURCE_ENABLE;
4842 /* SSC must be turned on before enabling the CPU output */
4843 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
4844 DRM_DEBUG_KMS("Using SSC on panel\n");
4845 val |= DREF_SSC1_ENABLE;
4847 val &= ~DREF_SSC1_ENABLE;
4849 /* Get SSC going before enabling the outputs */
4850 I915_WRITE(PCH_DREF_CONTROL, val);
4851 POSTING_READ(PCH_DREF_CONTROL);
4854 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4856 /* Enable CPU source on CPU attached eDP */
4858 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
4859 DRM_DEBUG_KMS("Using SSC on eDP\n");
4860 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
4863 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
4865 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4867 I915_WRITE(PCH_DREF_CONTROL, val);
4868 POSTING_READ(PCH_DREF_CONTROL);
4871 DRM_DEBUG_KMS("Disabling SSC entirely\n");
4873 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4875 /* Turn off CPU output */
4876 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4878 I915_WRITE(PCH_DREF_CONTROL, val);
4879 POSTING_READ(PCH_DREF_CONTROL);
4882 /* Turn off the SSC source */
4883 val &= ~DREF_SSC_SOURCE_MASK;
4884 val |= DREF_SSC_SOURCE_DISABLE;
4887 val &= ~DREF_SSC1_ENABLE;
4889 I915_WRITE(PCH_DREF_CONTROL, val);
4890 POSTING_READ(PCH_DREF_CONTROL);
4894 BUG_ON(val != final);
4897 /* Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O. */
4898 static void lpt_init_pch_refclk(struct drm_device *dev)
4900 struct drm_i915_private *dev_priv = dev->dev_private;
4901 struct drm_mode_config *mode_config = &dev->mode_config;
4902 struct intel_encoder *encoder;
4903 bool has_vga = false;
4904 bool is_sdv = false;
4907 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
4908 switch (encoder->type) {
4909 case INTEL_OUTPUT_ANALOG:
4918 mutex_lock(&dev_priv->dpio_lock);
4920 /* XXX: Rip out SDV support once Haswell ships for real. */
4921 if (IS_HASWELL(dev) && (dev->pci_device & 0xFF00) == 0x0C00)
4924 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
4925 tmp &= ~SBI_SSCCTL_DISABLE;
4926 tmp |= SBI_SSCCTL_PATHALT;
4927 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
4931 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
4932 tmp &= ~SBI_SSCCTL_PATHALT;
4933 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
4936 tmp = I915_READ(SOUTH_CHICKEN2);
4937 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
4938 I915_WRITE(SOUTH_CHICKEN2, tmp);
4940 if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
4941 FDI_MPHY_IOSFSB_RESET_STATUS, 100))
4942 DRM_ERROR("FDI mPHY reset assert timeout\n");
4944 tmp = I915_READ(SOUTH_CHICKEN2);
4945 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
4946 I915_WRITE(SOUTH_CHICKEN2, tmp);
4948 if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
4949 FDI_MPHY_IOSFSB_RESET_STATUS) == 0,
4951 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
4954 tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
4955 tmp &= ~(0xFF << 24);
4956 tmp |= (0x12 << 24);
4957 intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
4960 tmp = intel_sbi_read(dev_priv, 0x808C, SBI_MPHY);
4962 tmp |= (1 << 6) | (1 << 0);
4963 intel_sbi_write(dev_priv, 0x808C, tmp, SBI_MPHY);
4967 tmp = intel_sbi_read(dev_priv, 0x800C, SBI_MPHY);
4969 intel_sbi_write(dev_priv, 0x800C, tmp, SBI_MPHY);
4972 tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
4974 intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
4976 tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
4978 intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
4981 tmp = intel_sbi_read(dev_priv, 0x2038, SBI_MPHY);
4982 tmp |= (0x3F << 24) | (0xF << 20) | (0xF << 16);
4983 intel_sbi_write(dev_priv, 0x2038, tmp, SBI_MPHY);
4985 tmp = intel_sbi_read(dev_priv, 0x2138, SBI_MPHY);
4986 tmp |= (0x3F << 24) | (0xF << 20) | (0xF << 16);
4987 intel_sbi_write(dev_priv, 0x2138, tmp, SBI_MPHY);
4989 tmp = intel_sbi_read(dev_priv, 0x203C, SBI_MPHY);
4991 intel_sbi_write(dev_priv, 0x203C, tmp, SBI_MPHY);
4993 tmp = intel_sbi_read(dev_priv, 0x213C, SBI_MPHY);
4995 intel_sbi_write(dev_priv, 0x213C, tmp, SBI_MPHY);
4998 tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
4999 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
5000 intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
5002 tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
5003 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
5004 intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
5007 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
5010 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
5012 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
5015 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
5018 tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
5021 intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
5023 tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
5026 intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
5028 tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
5029 tmp &= ~(0xFF << 16);
5030 tmp |= (0x1C << 16);
5031 intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
5033 tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
5034 tmp &= ~(0xFF << 16);
5035 tmp |= (0x1C << 16);
5036 intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
5039 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
5041 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
5043 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
5045 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
5047 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
5048 tmp &= ~(0xF << 28);
5050 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
5052 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
5053 tmp &= ~(0xF << 28);
5055 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
5058 /* ULT uses SBI_GEN0, but ULT doesn't have VGA, so we don't care. */
5059 tmp = intel_sbi_read(dev_priv, SBI_DBUFF0, SBI_ICLK);
5060 tmp |= SBI_DBUFF0_ENABLE;
5061 intel_sbi_write(dev_priv, SBI_DBUFF0, tmp, SBI_ICLK);
5063 mutex_unlock(&dev_priv->dpio_lock);
5067 * Initialize reference clocks when the driver loads
5069 void intel_init_pch_refclk(struct drm_device *dev)
5071 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
5072 ironlake_init_pch_refclk(dev);
5073 else if (HAS_PCH_LPT(dev))
5074 lpt_init_pch_refclk(dev);
5077 static int ironlake_get_refclk(struct drm_crtc *crtc)
5079 struct drm_device *dev = crtc->dev;
5080 struct drm_i915_private *dev_priv = dev->dev_private;
5081 struct intel_encoder *encoder;
5082 struct intel_encoder *edp_encoder = NULL;
5083 int num_connectors = 0;
5084 bool is_lvds = false;
5086 for_each_encoder_on_crtc(dev, crtc, encoder) {
5087 switch (encoder->type) {
5088 case INTEL_OUTPUT_LVDS:
5091 case INTEL_OUTPUT_EDP:
5092 edp_encoder = encoder;
5098 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
5099 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
5100 dev_priv->lvds_ssc_freq);
5101 return dev_priv->lvds_ssc_freq * 1000;
5107 static void ironlake_set_pipeconf(struct drm_crtc *crtc,
5108 struct drm_display_mode *adjusted_mode,
5111 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5112 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5113 int pipe = intel_crtc->pipe;
5116 val = I915_READ(PIPECONF(pipe));
5118 val &= ~PIPECONF_BPC_MASK;
5119 switch (intel_crtc->config.pipe_bpp) {
5121 val |= PIPECONF_6BPC;
5124 val |= PIPECONF_8BPC;
5127 val |= PIPECONF_10BPC;
5130 val |= PIPECONF_12BPC;
5133 /* Case prevented by intel_choose_pipe_bpp_dither. */
5137 val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
5139 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
5141 val &= ~PIPECONF_INTERLACE_MASK;
5142 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
5143 val |= PIPECONF_INTERLACED_ILK;
5145 val |= PIPECONF_PROGRESSIVE;
5147 if (intel_crtc->config.limited_color_range)
5148 val |= PIPECONF_COLOR_RANGE_SELECT;
5150 val &= ~PIPECONF_COLOR_RANGE_SELECT;
5152 I915_WRITE(PIPECONF(pipe), val);
5153 POSTING_READ(PIPECONF(pipe));
5157 * Set up the pipe CSC unit.
5159 * Currently only full range RGB to limited range RGB conversion
5160 * is supported, but eventually this should handle various
5161 * RGB<->YCbCr scenarios as well.
5163 static void intel_set_pipe_csc(struct drm_crtc *crtc)
5165 struct drm_device *dev = crtc->dev;
5166 struct drm_i915_private *dev_priv = dev->dev_private;
5167 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5168 int pipe = intel_crtc->pipe;
5169 uint16_t coeff = 0x7800; /* 1.0 */
5172 * TODO: Check what kind of values actually come out of the pipe
5173 * with these coeff/postoff values and adjust to get the best
5174 * accuracy. Perhaps we even need to take the bpc value into
5178 if (intel_crtc->config.limited_color_range)
5179 coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
5182 * GY/GU and RY/RU should be the other way around according
5183 * to BSpec, but reality doesn't agree. Just set them up in
5184 * a way that results in the correct picture.
5186 I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16);
5187 I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0);
5189 I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff);
5190 I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0);
5192 I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0);
5193 I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16);
5195 I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
5196 I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
5197 I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
5199 if (INTEL_INFO(dev)->gen > 6) {
5200 uint16_t postoff = 0;
5202 if (intel_crtc->config.limited_color_range)
5203 postoff = (16 * (1 << 13) / 255) & 0x1fff;
5205 I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
5206 I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
5207 I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
5209 I915_WRITE(PIPE_CSC_MODE(pipe), 0);
5211 uint32_t mode = CSC_MODE_YUV_TO_RGB;
5213 if (intel_crtc->config.limited_color_range)
5214 mode |= CSC_BLACK_SCREEN_OFFSET;
5216 I915_WRITE(PIPE_CSC_MODE(pipe), mode);
5220 static void haswell_set_pipeconf(struct drm_crtc *crtc,
5221 struct drm_display_mode *adjusted_mode,
5224 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5225 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5226 enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
5229 val = I915_READ(PIPECONF(cpu_transcoder));
5231 val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
5233 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
5235 val &= ~PIPECONF_INTERLACE_MASK_HSW;
5236 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
5237 val |= PIPECONF_INTERLACED_ILK;
5239 val |= PIPECONF_PROGRESSIVE;
5241 I915_WRITE(PIPECONF(cpu_transcoder), val);
5242 POSTING_READ(PIPECONF(cpu_transcoder));
5245 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
5246 struct drm_display_mode *adjusted_mode,
5247 intel_clock_t *clock,
5248 bool *has_reduced_clock,
5249 intel_clock_t *reduced_clock)
5251 struct drm_device *dev = crtc->dev;
5252 struct drm_i915_private *dev_priv = dev->dev_private;
5253 struct intel_encoder *intel_encoder;
5255 const intel_limit_t *limit;
5256 bool ret, is_sdvo = false, is_tv = false, is_lvds = false;
5258 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
5259 switch (intel_encoder->type) {
5260 case INTEL_OUTPUT_LVDS:
5263 case INTEL_OUTPUT_SDVO:
5264 case INTEL_OUTPUT_HDMI:
5266 if (intel_encoder->needs_tv_clock)
5269 case INTEL_OUTPUT_TVOUT:
5275 refclk = ironlake_get_refclk(crtc);
5278 * Returns a set of divisors for the desired target clock with the given
5279 * refclk, or FALSE. The returned values represent the clock equation:
5280 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
5282 limit = intel_limit(crtc, refclk);
5283 ret = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
5288 if (is_lvds && dev_priv->lvds_downclock_avail) {
5290 * Ensure we match the reduced clock's P to the target clock.
5291 * If the clocks don't match, we can't switch the display clock
5292 * by using the FP0/FP1. In such case we will disable the LVDS
5293 * downclock feature.
5295 *has_reduced_clock = limit->find_pll(limit, crtc,
5296 dev_priv->lvds_downclock,
5302 if (is_sdvo && is_tv)
5303 i9xx_adjust_sdvo_tv_clock(to_intel_crtc(crtc));
5308 static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
5310 struct drm_i915_private *dev_priv = dev->dev_private;
5313 temp = I915_READ(SOUTH_CHICKEN1);
5314 if (temp & FDI_BC_BIFURCATION_SELECT)
5317 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
5318 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
5320 temp |= FDI_BC_BIFURCATION_SELECT;
5321 DRM_DEBUG_KMS("enabling fdi C rx\n");
5322 I915_WRITE(SOUTH_CHICKEN1, temp);
5323 POSTING_READ(SOUTH_CHICKEN1);
5326 static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc)
5328 struct drm_device *dev = intel_crtc->base.dev;
5329 struct drm_i915_private *dev_priv = dev->dev_private;
5330 struct intel_crtc *pipe_B_crtc =
5331 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
5333 DRM_DEBUG_KMS("checking fdi config on pipe %i, lanes %i\n",
5334 intel_crtc->pipe, intel_crtc->fdi_lanes);
5335 if (intel_crtc->fdi_lanes > 4) {
5336 DRM_DEBUG_KMS("invalid fdi lane config on pipe %i: %i lanes\n",
5337 intel_crtc->pipe, intel_crtc->fdi_lanes);
5338 /* Clamp lanes to avoid programming the hw with bogus values. */
5339 intel_crtc->fdi_lanes = 4;
5344 if (INTEL_INFO(dev)->num_pipes == 2)
5347 switch (intel_crtc->pipe) {
5351 if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
5352 intel_crtc->fdi_lanes > 2) {
5353 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
5354 intel_crtc->pipe, intel_crtc->fdi_lanes);
5355 /* Clamp lanes to avoid programming the hw with bogus values. */
5356 intel_crtc->fdi_lanes = 2;
5361 if (intel_crtc->fdi_lanes > 2)
5362 WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
5364 cpt_enable_fdi_bc_bifurcation(dev);
5368 if (!pipe_B_crtc->base.enabled || pipe_B_crtc->fdi_lanes <= 2) {
5369 if (intel_crtc->fdi_lanes > 2) {
5370 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
5371 intel_crtc->pipe, intel_crtc->fdi_lanes);
5372 /* Clamp lanes to avoid programming the hw with bogus values. */
5373 intel_crtc->fdi_lanes = 2;
5378 DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
5382 cpt_enable_fdi_bc_bifurcation(dev);
5390 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
5393 * Account for spread spectrum to avoid
5394 * oversubscribing the link. Max center spread
5395 * is 2.5%; use 5% for safety's sake.
5397 u32 bps = target_clock * bpp * 21 / 20;
5398 return bps / (link_bw * 8) + 1;
5401 void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
5402 struct intel_link_m_n *m_n)
5404 struct drm_device *dev = crtc->base.dev;
5405 struct drm_i915_private *dev_priv = dev->dev_private;
5406 int pipe = crtc->pipe;
5408 I915_WRITE(TRANSDATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
5409 I915_WRITE(TRANSDATA_N1(pipe), m_n->gmch_n);
5410 I915_WRITE(TRANSDPLINK_M1(pipe), m_n->link_m);
5411 I915_WRITE(TRANSDPLINK_N1(pipe), m_n->link_n);
5414 void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
5415 struct intel_link_m_n *m_n)
5417 struct drm_device *dev = crtc->base.dev;
5418 struct drm_i915_private *dev_priv = dev->dev_private;
5419 int pipe = crtc->pipe;
5420 enum transcoder transcoder = crtc->cpu_transcoder;
5422 if (INTEL_INFO(dev)->gen >= 5) {
5423 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
5424 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
5425 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
5426 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
5428 I915_WRITE(PIPE_GMCH_DATA_M(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
5429 I915_WRITE(PIPE_GMCH_DATA_N(pipe), m_n->gmch_n);
5430 I915_WRITE(PIPE_DP_LINK_M(pipe), m_n->link_m);
5431 I915_WRITE(PIPE_DP_LINK_N(pipe), m_n->link_n);
5435 static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
5437 struct drm_device *dev = crtc->dev;
5438 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5439 struct drm_display_mode *adjusted_mode =
5440 &intel_crtc->config.adjusted_mode;
5441 struct intel_link_m_n m_n = {0};
5442 int target_clock, lane, link_bw;
5444 /* FDI is a binary signal running at ~2.7GHz, encoding
5445 * each output octet as 10 bits. The actual frequency
5446 * is stored as a divider into a 100MHz clock, and the
5447 * mode pixel clock is stored in units of 1KHz.
5448 * Hence the bw of each lane in terms of the mode signal
5451 link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
5453 if (intel_crtc->config.pixel_target_clock)
5454 target_clock = intel_crtc->config.pixel_target_clock;
5456 target_clock = adjusted_mode->clock;
5458 lane = ironlake_get_lanes_required(target_clock, link_bw,
5459 intel_crtc->config.pipe_bpp);
5461 intel_crtc->fdi_lanes = lane;
5463 if (intel_crtc->config.pixel_multiplier > 1)
5464 link_bw *= intel_crtc->config.pixel_multiplier;
5465 intel_link_compute_m_n(intel_crtc->config.pipe_bpp, lane, target_clock,
5468 intel_cpu_transcoder_set_m_n(intel_crtc, &m_n);
5471 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
5472 intel_clock_t *clock, u32 *fp)
5474 struct drm_crtc *crtc = &intel_crtc->base;
5475 struct drm_device *dev = crtc->dev;
5476 struct drm_i915_private *dev_priv = dev->dev_private;
5477 struct intel_encoder *intel_encoder;
5479 int factor, num_connectors = 0;
5480 bool is_lvds = false, is_sdvo = false, is_tv = false;
5482 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
5483 switch (intel_encoder->type) {
5484 case INTEL_OUTPUT_LVDS:
5487 case INTEL_OUTPUT_SDVO:
5488 case INTEL_OUTPUT_HDMI:
5490 if (intel_encoder->needs_tv_clock)
5493 case INTEL_OUTPUT_TVOUT:
5501 /* Enable autotuning of the PLL clock (if permissible) */
5504 if ((intel_panel_use_ssc(dev_priv) &&
5505 dev_priv->lvds_ssc_freq == 100) ||
5506 (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
5508 } else if (is_sdvo && is_tv)
5511 if (clock->m < factor * clock->n)
5517 dpll |= DPLLB_MODE_LVDS;
5519 dpll |= DPLLB_MODE_DAC_SERIAL;
5521 if (intel_crtc->config.pixel_multiplier > 1) {
5522 dpll |= (intel_crtc->config.pixel_multiplier - 1)
5523 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
5525 dpll |= DPLL_DVO_HIGH_SPEED;
5527 if (intel_crtc->config.has_dp_encoder &&
5528 intel_crtc->config.has_pch_encoder)
5529 dpll |= DPLL_DVO_HIGH_SPEED;
5531 /* compute bitmask from p1 value */
5532 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5534 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
5536 switch (clock->p2) {
5538 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
5541 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
5544 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
5547 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
5551 if (is_sdvo && is_tv)
5552 dpll |= PLL_REF_INPUT_TVCLKINBC;
5554 /* XXX: just matching BIOS for now */
5555 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
5557 else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5558 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5560 dpll |= PLL_REF_INPUT_DREFCLK;
5565 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
5567 struct drm_framebuffer *fb)
5569 struct drm_device *dev = crtc->dev;
5570 struct drm_i915_private *dev_priv = dev->dev_private;
5571 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5572 struct drm_display_mode *adjusted_mode =
5573 &intel_crtc->config.adjusted_mode;
5574 struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
5575 int pipe = intel_crtc->pipe;
5576 int plane = intel_crtc->plane;
5577 int num_connectors = 0;
5578 intel_clock_t clock, reduced_clock;
5579 u32 dpll, fp = 0, fp2 = 0;
5580 bool ok, has_reduced_clock = false;
5581 bool is_lvds = false;
5582 struct intel_encoder *encoder;
5584 bool dither, fdi_config_ok;
5586 for_each_encoder_on_crtc(dev, crtc, encoder) {
5587 switch (encoder->type) {
5588 case INTEL_OUTPUT_LVDS:
5596 WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
5597 "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
5599 intel_crtc->cpu_transcoder = pipe;
5601 ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
5602 &has_reduced_clock, &reduced_clock);
5604 DRM_ERROR("Couldn't find PLL settings for mode!\n");
5607 /* Compat-code for transition, will disappear. */
5608 if (!intel_crtc->config.clock_set) {
5609 intel_crtc->config.dpll.n = clock.n;
5610 intel_crtc->config.dpll.m1 = clock.m1;
5611 intel_crtc->config.dpll.m2 = clock.m2;
5612 intel_crtc->config.dpll.p1 = clock.p1;
5613 intel_crtc->config.dpll.p2 = clock.p2;
5616 /* Ensure that the cursor is valid for the new mode before changing... */
5617 intel_crtc_update_cursor(crtc, true);
5619 /* determine panel color depth */
5620 dither = intel_crtc->config.dither;
5621 if (is_lvds && dev_priv->lvds_dither)
5624 fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
5625 if (has_reduced_clock)
5626 fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
5629 dpll = ironlake_compute_dpll(intel_crtc, &clock, &fp);
5631 DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
5632 drm_mode_debug_printmodeline(mode);
5634 /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
5635 if (intel_crtc->config.has_pch_encoder) {
5636 struct intel_pch_pll *pll;
5638 pll = intel_get_pch_pll(intel_crtc, dpll, fp);
5640 DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
5645 intel_put_pch_pll(intel_crtc);
5647 if (intel_crtc->config.has_dp_encoder)
5648 intel_dp_set_m_n(intel_crtc);
5650 for_each_encoder_on_crtc(dev, crtc, encoder)
5651 if (encoder->pre_pll_enable)
5652 encoder->pre_pll_enable(encoder);
5654 if (intel_crtc->pch_pll) {
5655 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
5657 /* Wait for the clocks to stabilize. */
5658 POSTING_READ(intel_crtc->pch_pll->pll_reg);
5661 /* The pixel multiplier can only be updated once the
5662 * DPLL is enabled and the clocks are stable.
5664 * So write it again.
5666 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
5669 intel_crtc->lowfreq_avail = false;
5670 if (intel_crtc->pch_pll) {
5671 if (is_lvds && has_reduced_clock && i915_powersave) {
5672 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
5673 intel_crtc->lowfreq_avail = true;
5675 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
5679 intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
5681 /* Note, this also computes intel_crtc->fdi_lanes which is used below in
5682 * ironlake_check_fdi_lanes. */
5683 intel_crtc->fdi_lanes = 0;
5684 if (intel_crtc->config.has_pch_encoder)
5685 ironlake_fdi_set_m_n(crtc);
5687 fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
5689 ironlake_set_pipeconf(crtc, adjusted_mode, dither);
5691 intel_wait_for_vblank(dev, pipe);
5693 /* Set up the display plane register */
5694 I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
5695 POSTING_READ(DSPCNTR(plane));
5697 ret = intel_pipe_set_base(crtc, x, y, fb);
5699 intel_update_watermarks(dev);
5701 intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
5703 return fdi_config_ok ? ret : -EINVAL;
5706 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
5707 struct intel_crtc_config *pipe_config)
5709 struct drm_device *dev = crtc->base.dev;
5710 struct drm_i915_private *dev_priv = dev->dev_private;
5713 tmp = I915_READ(PIPECONF(crtc->pipe));
5714 if (!(tmp & PIPECONF_ENABLE))
5717 if (I915_READ(TRANSCONF(crtc->pipe)) & TRANS_ENABLE)
5718 pipe_config->has_pch_encoder = true;
5723 static void haswell_modeset_global_resources(struct drm_device *dev)
5725 struct drm_i915_private *dev_priv = dev->dev_private;
5726 bool enable = false;
5727 struct intel_crtc *crtc;
5728 struct intel_encoder *encoder;
5730 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
5731 if (crtc->pipe != PIPE_A && crtc->base.enabled)
5733 /* XXX: Should check for edp transcoder here, but thanks to init
5734 * sequence that's not yet available. Just in case desktop eDP
5735 * on PORT D is possible on haswell, too. */
5738 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
5740 if (encoder->type != INTEL_OUTPUT_EDP &&
5741 encoder->connectors_active)
5745 /* Even the eDP panel fitter is outside the always-on well. */
5746 if (dev_priv->pch_pf_size)
5749 intel_set_power_well(dev, enable);
5752 static int haswell_crtc_mode_set(struct drm_crtc *crtc,
5754 struct drm_framebuffer *fb)
5756 struct drm_device *dev = crtc->dev;
5757 struct drm_i915_private *dev_priv = dev->dev_private;
5758 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5759 struct drm_display_mode *adjusted_mode =
5760 &intel_crtc->config.adjusted_mode;
5761 struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
5762 int pipe = intel_crtc->pipe;
5763 int plane = intel_crtc->plane;
5764 int num_connectors = 0;
5765 bool is_cpu_edp = false;
5766 struct intel_encoder *encoder;
5770 for_each_encoder_on_crtc(dev, crtc, encoder) {
5771 switch (encoder->type) {
5772 case INTEL_OUTPUT_EDP:
5773 if (!intel_encoder_is_pch_edp(&encoder->base))
5782 intel_crtc->cpu_transcoder = TRANSCODER_EDP;
5784 intel_crtc->cpu_transcoder = pipe;
5786 /* We are not sure yet this won't happen. */
5787 WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n",
5788 INTEL_PCH_TYPE(dev));
5790 WARN(num_connectors != 1, "%d connectors attached to pipe %c\n",
5791 num_connectors, pipe_name(pipe));
5793 WARN_ON(I915_READ(PIPECONF(intel_crtc->cpu_transcoder)) &
5794 (PIPECONF_ENABLE | I965_PIPECONF_ACTIVE));
5796 WARN_ON(I915_READ(DSPCNTR(plane)) & DISPLAY_PLANE_ENABLE);
5798 if (!intel_ddi_pll_mode_set(crtc, adjusted_mode->clock))
5801 /* Ensure that the cursor is valid for the new mode before changing... */
5802 intel_crtc_update_cursor(crtc, true);
5804 /* determine panel color depth */
5805 dither = intel_crtc->config.dither;
5807 DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
5808 drm_mode_debug_printmodeline(mode);
5810 if (intel_crtc->config.has_dp_encoder)
5811 intel_dp_set_m_n(intel_crtc);
5813 intel_crtc->lowfreq_avail = false;
5815 intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
5817 if (intel_crtc->config.has_pch_encoder)
5818 ironlake_fdi_set_m_n(crtc);
5820 haswell_set_pipeconf(crtc, adjusted_mode, dither);
5822 intel_set_pipe_csc(crtc);
5824 /* Set up the display plane register */
5825 I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE);
5826 POSTING_READ(DSPCNTR(plane));
5828 ret = intel_pipe_set_base(crtc, x, y, fb);
5830 intel_update_watermarks(dev);
5832 intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
5837 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
5838 struct intel_crtc_config *pipe_config)
5840 struct drm_device *dev = crtc->base.dev;
5841 struct drm_i915_private *dev_priv = dev->dev_private;
5844 tmp = I915_READ(PIPECONF(crtc->cpu_transcoder));
5845 if (!(tmp & PIPECONF_ENABLE))
5849 * aswell has only FDI/PCH transcoder A. It is which is connected to
5850 * DDI E. So just check whether this pipe is wired to DDI E and whether
5851 * the PCH transcoder is on.
5853 tmp = I915_READ(TRANS_DDI_FUNC_CTL(crtc->pipe));
5854 if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
5855 I915_READ(TRANSCONF(PIPE_A)) & TRANS_ENABLE)
5856 pipe_config->has_pch_encoder = true;
5862 static int intel_crtc_mode_set(struct drm_crtc *crtc,
5864 struct drm_framebuffer *fb)
5866 struct drm_device *dev = crtc->dev;
5867 struct drm_i915_private *dev_priv = dev->dev_private;
5868 struct drm_encoder_helper_funcs *encoder_funcs;
5869 struct intel_encoder *encoder;
5870 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5871 struct drm_display_mode *adjusted_mode =
5872 &intel_crtc->config.adjusted_mode;
5873 struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
5874 int pipe = intel_crtc->pipe;
5877 drm_vblank_pre_modeset(dev, pipe);
5879 ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
5881 drm_vblank_post_modeset(dev, pipe);
5886 for_each_encoder_on_crtc(dev, crtc, encoder) {
5887 DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
5888 encoder->base.base.id,
5889 drm_get_encoder_name(&encoder->base),
5890 mode->base.id, mode->name);
5891 if (encoder->mode_set) {
5892 encoder->mode_set(encoder);
5894 encoder_funcs = encoder->base.helper_private;
5895 encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
5902 static bool intel_eld_uptodate(struct drm_connector *connector,
5903 int reg_eldv, uint32_t bits_eldv,
5904 int reg_elda, uint32_t bits_elda,
5907 struct drm_i915_private *dev_priv = connector->dev->dev_private;
5908 uint8_t *eld = connector->eld;
5911 i = I915_READ(reg_eldv);
5920 i = I915_READ(reg_elda);
5922 I915_WRITE(reg_elda, i);
5924 for (i = 0; i < eld[2]; i++)
5925 if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
5931 static void g4x_write_eld(struct drm_connector *connector,
5932 struct drm_crtc *crtc)
5934 struct drm_i915_private *dev_priv = connector->dev->dev_private;
5935 uint8_t *eld = connector->eld;
5940 i = I915_READ(G4X_AUD_VID_DID);
5942 if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
5943 eldv = G4X_ELDV_DEVCL_DEVBLC;
5945 eldv = G4X_ELDV_DEVCTG;
5947 if (intel_eld_uptodate(connector,
5948 G4X_AUD_CNTL_ST, eldv,
5949 G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
5950 G4X_HDMIW_HDMIEDID))
5953 i = I915_READ(G4X_AUD_CNTL_ST);
5954 i &= ~(eldv | G4X_ELD_ADDR);
5955 len = (i >> 9) & 0x1f; /* ELD buffer size */
5956 I915_WRITE(G4X_AUD_CNTL_ST, i);
5961 len = min_t(uint8_t, eld[2], len);
5962 DRM_DEBUG_DRIVER("ELD size %d\n", len);
5963 for (i = 0; i < len; i++)
5964 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
5966 i = I915_READ(G4X_AUD_CNTL_ST);
5968 I915_WRITE(G4X_AUD_CNTL_ST, i);
5971 static void haswell_write_eld(struct drm_connector *connector,
5972 struct drm_crtc *crtc)
5974 struct drm_i915_private *dev_priv = connector->dev->dev_private;
5975 uint8_t *eld = connector->eld;
5976 struct drm_device *dev = crtc->dev;
5977 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5981 int pipe = to_intel_crtc(crtc)->pipe;
5984 int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
5985 int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe);
5986 int aud_config = HSW_AUD_CFG(pipe);
5987 int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
5990 DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n");
5992 /* Audio output enable */
5993 DRM_DEBUG_DRIVER("HDMI audio: enable codec\n");
5994 tmp = I915_READ(aud_cntrl_st2);
5995 tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
5996 I915_WRITE(aud_cntrl_st2, tmp);
5998 /* Wait for 1 vertical blank */
5999 intel_wait_for_vblank(dev, pipe);
6001 /* Set ELD valid state */
6002 tmp = I915_READ(aud_cntrl_st2);
6003 DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%8x\n", tmp);
6004 tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
6005 I915_WRITE(aud_cntrl_st2, tmp);
6006 tmp = I915_READ(aud_cntrl_st2);
6007 DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%8x\n", tmp);
6009 /* Enable HDMI mode */
6010 tmp = I915_READ(aud_config);
6011 DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%8x\n", tmp);
6012 /* clear N_programing_enable and N_value_index */
6013 tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
6014 I915_WRITE(aud_config, tmp);
6016 DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
6018 eldv = AUDIO_ELD_VALID_A << (pipe * 4);
6019 intel_crtc->eld_vld = true;
6021 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
6022 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
6023 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
6024 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
6026 I915_WRITE(aud_config, 0);
6028 if (intel_eld_uptodate(connector,
6029 aud_cntrl_st2, eldv,
6030 aud_cntl_st, IBX_ELD_ADDRESS,
6034 i = I915_READ(aud_cntrl_st2);
6036 I915_WRITE(aud_cntrl_st2, i);
6041 i = I915_READ(aud_cntl_st);
6042 i &= ~IBX_ELD_ADDRESS;
6043 I915_WRITE(aud_cntl_st, i);
6044 i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */
6045 DRM_DEBUG_DRIVER("port num:%d\n", i);
6047 len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
6048 DRM_DEBUG_DRIVER("ELD size %d\n", len);
6049 for (i = 0; i < len; i++)
6050 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
6052 i = I915_READ(aud_cntrl_st2);
6054 I915_WRITE(aud_cntrl_st2, i);
6058 static void ironlake_write_eld(struct drm_connector *connector,
6059 struct drm_crtc *crtc)
6061 struct drm_i915_private *dev_priv = connector->dev->dev_private;
6062 uint8_t *eld = connector->eld;
6070 int pipe = to_intel_crtc(crtc)->pipe;
6072 if (HAS_PCH_IBX(connector->dev)) {
6073 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
6074 aud_config = IBX_AUD_CFG(pipe);
6075 aud_cntl_st = IBX_AUD_CNTL_ST(pipe);
6076 aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
6078 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe);
6079 aud_config = CPT_AUD_CFG(pipe);
6080 aud_cntl_st = CPT_AUD_CNTL_ST(pipe);
6081 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
6084 DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
6086 i = I915_READ(aud_cntl_st);
6087 i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */
6089 DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
6090 /* operate blindly on all ports */
6091 eldv = IBX_ELD_VALIDB;
6092 eldv |= IBX_ELD_VALIDB << 4;
6093 eldv |= IBX_ELD_VALIDB << 8;
6095 DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
6096 eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
6099 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
6100 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
6101 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
6102 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
6104 I915_WRITE(aud_config, 0);
6106 if (intel_eld_uptodate(connector,
6107 aud_cntrl_st2, eldv,
6108 aud_cntl_st, IBX_ELD_ADDRESS,
6112 i = I915_READ(aud_cntrl_st2);
6114 I915_WRITE(aud_cntrl_st2, i);
6119 i = I915_READ(aud_cntl_st);
6120 i &= ~IBX_ELD_ADDRESS;
6121 I915_WRITE(aud_cntl_st, i);
6123 len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
6124 DRM_DEBUG_DRIVER("ELD size %d\n", len);
6125 for (i = 0; i < len; i++)
6126 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
6128 i = I915_READ(aud_cntrl_st2);
6130 I915_WRITE(aud_cntrl_st2, i);
6133 void intel_write_eld(struct drm_encoder *encoder,
6134 struct drm_display_mode *mode)
6136 struct drm_crtc *crtc = encoder->crtc;
6137 struct drm_connector *connector;
6138 struct drm_device *dev = encoder->dev;
6139 struct drm_i915_private *dev_priv = dev->dev_private;
6141 connector = drm_select_eld(encoder, mode);
6145 DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6147 drm_get_connector_name(connector),
6148 connector->encoder->base.id,
6149 drm_get_encoder_name(connector->encoder));
6151 connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
6153 if (dev_priv->display.write_eld)
6154 dev_priv->display.write_eld(connector, crtc);
6157 /** Loads the palette/gamma unit for the CRTC with the prepared values */
6158 void intel_crtc_load_lut(struct drm_crtc *crtc)
6160 struct drm_device *dev = crtc->dev;
6161 struct drm_i915_private *dev_priv = dev->dev_private;
6162 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6163 int palreg = PALETTE(intel_crtc->pipe);
6166 /* The clocks have to be on to load the palette. */
6167 if (!crtc->enabled || !intel_crtc->active)
6170 /* use legacy palette for Ironlake */
6171 if (HAS_PCH_SPLIT(dev))
6172 palreg = LGC_PALETTE(intel_crtc->pipe);
6174 for (i = 0; i < 256; i++) {
6175 I915_WRITE(palreg + 4 * i,
6176 (intel_crtc->lut_r[i] << 16) |
6177 (intel_crtc->lut_g[i] << 8) |
6178 intel_crtc->lut_b[i]);
6182 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
6184 struct drm_device *dev = crtc->dev;
6185 struct drm_i915_private *dev_priv = dev->dev_private;
6186 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6187 bool visible = base != 0;
6190 if (intel_crtc->cursor_visible == visible)
6193 cntl = I915_READ(_CURACNTR);
6195 /* On these chipsets we can only modify the base whilst
6196 * the cursor is disabled.
6198 I915_WRITE(_CURABASE, base);
6200 cntl &= ~(CURSOR_FORMAT_MASK);
6201 /* XXX width must be 64, stride 256 => 0x00 << 28 */
6202 cntl |= CURSOR_ENABLE |
6203 CURSOR_GAMMA_ENABLE |
6206 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
6207 I915_WRITE(_CURACNTR, cntl);
6209 intel_crtc->cursor_visible = visible;
6212 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
6214 struct drm_device *dev = crtc->dev;
6215 struct drm_i915_private *dev_priv = dev->dev_private;
6216 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6217 int pipe = intel_crtc->pipe;
6218 bool visible = base != 0;
6220 if (intel_crtc->cursor_visible != visible) {
6221 uint32_t cntl = I915_READ(CURCNTR(pipe));
6223 cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
6224 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
6225 cntl |= pipe << 28; /* Connect to correct pipe */
6227 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
6228 cntl |= CURSOR_MODE_DISABLE;
6230 I915_WRITE(CURCNTR(pipe), cntl);
6232 intel_crtc->cursor_visible = visible;
6234 /* and commit changes on next vblank */
6235 I915_WRITE(CURBASE(pipe), base);
6238 static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
6240 struct drm_device *dev = crtc->dev;
6241 struct drm_i915_private *dev_priv = dev->dev_private;
6242 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6243 int pipe = intel_crtc->pipe;
6244 bool visible = base != 0;
6246 if (intel_crtc->cursor_visible != visible) {
6247 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
6249 cntl &= ~CURSOR_MODE;
6250 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
6252 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
6253 cntl |= CURSOR_MODE_DISABLE;
6255 if (IS_HASWELL(dev))
6256 cntl |= CURSOR_PIPE_CSC_ENABLE;
6257 I915_WRITE(CURCNTR_IVB(pipe), cntl);
6259 intel_crtc->cursor_visible = visible;
6261 /* and commit changes on next vblank */
6262 I915_WRITE(CURBASE_IVB(pipe), base);
6265 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
6266 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
6269 struct drm_device *dev = crtc->dev;
6270 struct drm_i915_private *dev_priv = dev->dev_private;
6271 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6272 int pipe = intel_crtc->pipe;
6273 int x = intel_crtc->cursor_x;
6274 int y = intel_crtc->cursor_y;
6280 if (on && crtc->enabled && crtc->fb) {
6281 base = intel_crtc->cursor_addr;
6282 if (x > (int) crtc->fb->width)
6285 if (y > (int) crtc->fb->height)
6291 if (x + intel_crtc->cursor_width < 0)
6294 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
6297 pos |= x << CURSOR_X_SHIFT;
6300 if (y + intel_crtc->cursor_height < 0)
6303 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
6306 pos |= y << CURSOR_Y_SHIFT;
6308 visible = base != 0;
6309 if (!visible && !intel_crtc->cursor_visible)
6312 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
6313 I915_WRITE(CURPOS_IVB(pipe), pos);
6314 ivb_update_cursor(crtc, base);
6316 I915_WRITE(CURPOS(pipe), pos);
6317 if (IS_845G(dev) || IS_I865G(dev))
6318 i845_update_cursor(crtc, base);
6320 i9xx_update_cursor(crtc, base);
6324 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
6325 struct drm_file *file,
6327 uint32_t width, uint32_t height)
6329 struct drm_device *dev = crtc->dev;
6330 struct drm_i915_private *dev_priv = dev->dev_private;
6331 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6332 struct drm_i915_gem_object *obj;
6336 /* if we want to turn off the cursor ignore width and height */
6338 DRM_DEBUG_KMS("cursor off\n");
6341 mutex_lock(&dev->struct_mutex);
6345 /* Currently we only support 64x64 cursors */
6346 if (width != 64 || height != 64) {
6347 DRM_ERROR("we currently only support 64x64 cursors\n");
6351 obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
6352 if (&obj->base == NULL)
6355 if (obj->base.size < width * height * 4) {
6356 DRM_ERROR("buffer is to small\n");
6361 /* we only need to pin inside GTT if cursor is non-phy */
6362 mutex_lock(&dev->struct_mutex);
6363 if (!dev_priv->info->cursor_needs_physical) {
6366 if (obj->tiling_mode) {
6367 DRM_ERROR("cursor cannot be tiled\n");
6372 /* Note that the w/a also requires 2 PTE of padding following
6373 * the bo. We currently fill all unused PTE with the shadow
6374 * page and so we should always have valid PTE following the
6375 * cursor preventing the VT-d warning.
6378 if (need_vtd_wa(dev))
6379 alignment = 64*1024;
6381 ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
6383 DRM_ERROR("failed to move cursor bo into the GTT\n");
6387 ret = i915_gem_object_put_fence(obj);
6389 DRM_ERROR("failed to release fence for cursor");
6393 addr = obj->gtt_offset;
6395 int align = IS_I830(dev) ? 16 * 1024 : 256;
6396 ret = i915_gem_attach_phys_object(dev, obj,
6397 (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
6400 DRM_ERROR("failed to attach phys object\n");
6403 addr = obj->phys_obj->handle->busaddr;
6407 I915_WRITE(CURSIZE, (height << 12) | width);
6410 if (intel_crtc->cursor_bo) {
6411 if (dev_priv->info->cursor_needs_physical) {
6412 if (intel_crtc->cursor_bo != obj)
6413 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
6415 i915_gem_object_unpin(intel_crtc->cursor_bo);
6416 drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
6419 mutex_unlock(&dev->struct_mutex);
6421 intel_crtc->cursor_addr = addr;
6422 intel_crtc->cursor_bo = obj;
6423 intel_crtc->cursor_width = width;
6424 intel_crtc->cursor_height = height;
6426 intel_crtc_update_cursor(crtc, true);
6430 i915_gem_object_unpin(obj);
6432 mutex_unlock(&dev->struct_mutex);
6434 drm_gem_object_unreference_unlocked(&obj->base);
6438 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
6440 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6442 intel_crtc->cursor_x = x;
6443 intel_crtc->cursor_y = y;
6445 intel_crtc_update_cursor(crtc, true);
6450 /** Sets the color ramps on behalf of RandR */
6451 void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
6452 u16 blue, int regno)
6454 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6456 intel_crtc->lut_r[regno] = red >> 8;
6457 intel_crtc->lut_g[regno] = green >> 8;
6458 intel_crtc->lut_b[regno] = blue >> 8;
6461 void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
6462 u16 *blue, int regno)
6464 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6466 *red = intel_crtc->lut_r[regno] << 8;
6467 *green = intel_crtc->lut_g[regno] << 8;
6468 *blue = intel_crtc->lut_b[regno] << 8;
6471 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
6472 u16 *blue, uint32_t start, uint32_t size)
6474 int end = (start + size > 256) ? 256 : start + size, i;
6475 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6477 for (i = start; i < end; i++) {
6478 intel_crtc->lut_r[i] = red[i] >> 8;
6479 intel_crtc->lut_g[i] = green[i] >> 8;
6480 intel_crtc->lut_b[i] = blue[i] >> 8;
6483 intel_crtc_load_lut(crtc);
6486 /* VESA 640x480x72Hz mode to set on the pipe */
6487 static struct drm_display_mode load_detect_mode = {
6488 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
6489 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
6492 static struct drm_framebuffer *
6493 intel_framebuffer_create(struct drm_device *dev,
6494 struct drm_mode_fb_cmd2 *mode_cmd,
6495 struct drm_i915_gem_object *obj)
6497 struct intel_framebuffer *intel_fb;
6500 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
6502 drm_gem_object_unreference_unlocked(&obj->base);
6503 return ERR_PTR(-ENOMEM);
6506 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
6508 drm_gem_object_unreference_unlocked(&obj->base);
6510 return ERR_PTR(ret);
6513 return &intel_fb->base;
6517 intel_framebuffer_pitch_for_width(int width, int bpp)
6519 u32 pitch = DIV_ROUND_UP(width * bpp, 8);
6520 return ALIGN(pitch, 64);
6524 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
6526 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
6527 return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
6530 static struct drm_framebuffer *
6531 intel_framebuffer_create_for_mode(struct drm_device *dev,
6532 struct drm_display_mode *mode,
6535 struct drm_i915_gem_object *obj;
6536 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
6538 obj = i915_gem_alloc_object(dev,
6539 intel_framebuffer_size_for_mode(mode, bpp));
6541 return ERR_PTR(-ENOMEM);
6543 mode_cmd.width = mode->hdisplay;
6544 mode_cmd.height = mode->vdisplay;
6545 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
6547 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
6549 return intel_framebuffer_create(dev, &mode_cmd, obj);
6552 static struct drm_framebuffer *
6553 mode_fits_in_fbdev(struct drm_device *dev,
6554 struct drm_display_mode *mode)
6556 struct drm_i915_private *dev_priv = dev->dev_private;
6557 struct drm_i915_gem_object *obj;
6558 struct drm_framebuffer *fb;
6560 if (dev_priv->fbdev == NULL)
6563 obj = dev_priv->fbdev->ifb.obj;
6567 fb = &dev_priv->fbdev->ifb.base;
6568 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
6569 fb->bits_per_pixel))
6572 if (obj->base.size < mode->vdisplay * fb->pitches[0])
6578 bool intel_get_load_detect_pipe(struct drm_connector *connector,
6579 struct drm_display_mode *mode,
6580 struct intel_load_detect_pipe *old)
6582 struct intel_crtc *intel_crtc;
6583 struct intel_encoder *intel_encoder =
6584 intel_attached_encoder(connector);
6585 struct drm_crtc *possible_crtc;
6586 struct drm_encoder *encoder = &intel_encoder->base;
6587 struct drm_crtc *crtc = NULL;
6588 struct drm_device *dev = encoder->dev;
6589 struct drm_framebuffer *fb;
6592 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6593 connector->base.id, drm_get_connector_name(connector),
6594 encoder->base.id, drm_get_encoder_name(encoder));
6597 * Algorithm gets a little messy:
6599 * - if the connector already has an assigned crtc, use it (but make
6600 * sure it's on first)
6602 * - try to find the first unused crtc that can drive this connector,
6603 * and use that if we find one
6606 /* See if we already have a CRTC for this connector */
6607 if (encoder->crtc) {
6608 crtc = encoder->crtc;
6610 mutex_lock(&crtc->mutex);
6612 old->dpms_mode = connector->dpms;
6613 old->load_detect_temp = false;
6615 /* Make sure the crtc and connector are running */
6616 if (connector->dpms != DRM_MODE_DPMS_ON)
6617 connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
6622 /* Find an unused one (if possible) */
6623 list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
6625 if (!(encoder->possible_crtcs & (1 << i)))
6627 if (!possible_crtc->enabled) {
6628 crtc = possible_crtc;
6634 * If we didn't find an unused CRTC, don't use any.
6637 DRM_DEBUG_KMS("no pipe available for load-detect\n");
6641 mutex_lock(&crtc->mutex);
6642 intel_encoder->new_crtc = to_intel_crtc(crtc);
6643 to_intel_connector(connector)->new_encoder = intel_encoder;
6645 intel_crtc = to_intel_crtc(crtc);
6646 old->dpms_mode = connector->dpms;
6647 old->load_detect_temp = true;
6648 old->release_fb = NULL;
6651 mode = &load_detect_mode;
6653 /* We need a framebuffer large enough to accommodate all accesses
6654 * that the plane may generate whilst we perform load detection.
6655 * We can not rely on the fbcon either being present (we get called
6656 * during its initialisation to detect all boot displays, or it may
6657 * not even exist) or that it is large enough to satisfy the
6660 fb = mode_fits_in_fbdev(dev, mode);
6662 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
6663 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
6664 old->release_fb = fb;
6666 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
6668 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
6669 mutex_unlock(&crtc->mutex);
6673 if (intel_set_mode(crtc, mode, 0, 0, fb)) {
6674 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
6675 if (old->release_fb)
6676 old->release_fb->funcs->destroy(old->release_fb);
6677 mutex_unlock(&crtc->mutex);
6681 /* let the connector get through one full cycle before testing */
6682 intel_wait_for_vblank(dev, intel_crtc->pipe);
6686 void intel_release_load_detect_pipe(struct drm_connector *connector,
6687 struct intel_load_detect_pipe *old)
6689 struct intel_encoder *intel_encoder =
6690 intel_attached_encoder(connector);
6691 struct drm_encoder *encoder = &intel_encoder->base;
6692 struct drm_crtc *crtc = encoder->crtc;
6694 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6695 connector->base.id, drm_get_connector_name(connector),
6696 encoder->base.id, drm_get_encoder_name(encoder));
6698 if (old->load_detect_temp) {
6699 to_intel_connector(connector)->new_encoder = NULL;
6700 intel_encoder->new_crtc = NULL;
6701 intel_set_mode(crtc, NULL, 0, 0, NULL);
6703 if (old->release_fb) {
6704 drm_framebuffer_unregister_private(old->release_fb);
6705 drm_framebuffer_unreference(old->release_fb);
6708 mutex_unlock(&crtc->mutex);
6712 /* Switch crtc and encoder back off if necessary */
6713 if (old->dpms_mode != DRM_MODE_DPMS_ON)
6714 connector->funcs->dpms(connector, old->dpms_mode);
6716 mutex_unlock(&crtc->mutex);
6719 /* Returns the clock of the currently programmed mode of the given pipe. */
6720 static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
6722 struct drm_i915_private *dev_priv = dev->dev_private;
6723 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6724 int pipe = intel_crtc->pipe;
6725 u32 dpll = I915_READ(DPLL(pipe));
6727 intel_clock_t clock;
6729 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
6730 fp = I915_READ(FP0(pipe));
6732 fp = I915_READ(FP1(pipe));
6734 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
6735 if (IS_PINEVIEW(dev)) {
6736 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
6737 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
6739 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
6740 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
6743 if (!IS_GEN2(dev)) {
6744 if (IS_PINEVIEW(dev))
6745 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
6746 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
6748 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
6749 DPLL_FPA01_P1_POST_DIV_SHIFT);
6751 switch (dpll & DPLL_MODE_MASK) {
6752 case DPLLB_MODE_DAC_SERIAL:
6753 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
6756 case DPLLB_MODE_LVDS:
6757 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
6761 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
6762 "mode\n", (int)(dpll & DPLL_MODE_MASK));
6766 /* XXX: Handle the 100Mhz refclk */
6767 intel_clock(dev, 96000, &clock);
6769 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
6772 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
6773 DPLL_FPA01_P1_POST_DIV_SHIFT);
6776 if ((dpll & PLL_REF_INPUT_MASK) ==
6777 PLLB_REF_INPUT_SPREADSPECTRUMIN) {
6778 /* XXX: might not be 66MHz */
6779 intel_clock(dev, 66000, &clock);
6781 intel_clock(dev, 48000, &clock);
6783 if (dpll & PLL_P1_DIVIDE_BY_TWO)
6786 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
6787 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
6789 if (dpll & PLL_P2_DIVIDE_BY_4)
6794 intel_clock(dev, 48000, &clock);
6798 /* XXX: It would be nice to validate the clocks, but we can't reuse
6799 * i830PllIsValid() because it relies on the xf86_config connector
6800 * configuration being accurate, which it isn't necessarily.
6806 /** Returns the currently programmed mode of the given pipe. */
6807 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
6808 struct drm_crtc *crtc)
6810 struct drm_i915_private *dev_priv = dev->dev_private;
6811 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6812 enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
6813 struct drm_display_mode *mode;
6814 int htot = I915_READ(HTOTAL(cpu_transcoder));
6815 int hsync = I915_READ(HSYNC(cpu_transcoder));
6816 int vtot = I915_READ(VTOTAL(cpu_transcoder));
6817 int vsync = I915_READ(VSYNC(cpu_transcoder));
6819 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
6823 mode->clock = intel_crtc_clock_get(dev, crtc);
6824 mode->hdisplay = (htot & 0xffff) + 1;
6825 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
6826 mode->hsync_start = (hsync & 0xffff) + 1;
6827 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
6828 mode->vdisplay = (vtot & 0xffff) + 1;
6829 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
6830 mode->vsync_start = (vsync & 0xffff) + 1;
6831 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
6833 drm_mode_set_name(mode);
6838 static void intel_increase_pllclock(struct drm_crtc *crtc)
6840 struct drm_device *dev = crtc->dev;
6841 drm_i915_private_t *dev_priv = dev->dev_private;
6842 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6843 int pipe = intel_crtc->pipe;
6844 int dpll_reg = DPLL(pipe);
6847 if (HAS_PCH_SPLIT(dev))
6850 if (!dev_priv->lvds_downclock_avail)
6853 dpll = I915_READ(dpll_reg);
6854 if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
6855 DRM_DEBUG_DRIVER("upclocking LVDS\n");
6857 assert_panel_unlocked(dev_priv, pipe);
6859 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
6860 I915_WRITE(dpll_reg, dpll);
6861 intel_wait_for_vblank(dev, pipe);
6863 dpll = I915_READ(dpll_reg);
6864 if (dpll & DISPLAY_RATE_SELECT_FPA1)
6865 DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
6869 static void intel_decrease_pllclock(struct drm_crtc *crtc)
6871 struct drm_device *dev = crtc->dev;
6872 drm_i915_private_t *dev_priv = dev->dev_private;
6873 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6875 if (HAS_PCH_SPLIT(dev))
6878 if (!dev_priv->lvds_downclock_avail)
6882 * Since this is called by a timer, we should never get here in
6885 if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
6886 int pipe = intel_crtc->pipe;
6887 int dpll_reg = DPLL(pipe);
6890 DRM_DEBUG_DRIVER("downclocking LVDS\n");
6892 assert_panel_unlocked(dev_priv, pipe);
6894 dpll = I915_READ(dpll_reg);
6895 dpll |= DISPLAY_RATE_SELECT_FPA1;
6896 I915_WRITE(dpll_reg, dpll);
6897 intel_wait_for_vblank(dev, pipe);
6898 dpll = I915_READ(dpll_reg);
6899 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
6900 DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
6905 void intel_mark_busy(struct drm_device *dev)
6907 i915_update_gfx_val(dev->dev_private);
6910 void intel_mark_idle(struct drm_device *dev)
6912 struct drm_crtc *crtc;
6914 if (!i915_powersave)
6917 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
6921 intel_decrease_pllclock(crtc);
6925 void intel_mark_fb_busy(struct drm_i915_gem_object *obj)
6927 struct drm_device *dev = obj->base.dev;
6928 struct drm_crtc *crtc;
6930 if (!i915_powersave)
6933 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
6937 if (to_intel_framebuffer(crtc->fb)->obj == obj)
6938 intel_increase_pllclock(crtc);
6942 static void intel_crtc_destroy(struct drm_crtc *crtc)
6944 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6945 struct drm_device *dev = crtc->dev;
6946 struct intel_unpin_work *work;
6947 unsigned long flags;
6949 spin_lock_irqsave(&dev->event_lock, flags);
6950 work = intel_crtc->unpin_work;
6951 intel_crtc->unpin_work = NULL;
6952 spin_unlock_irqrestore(&dev->event_lock, flags);
6955 cancel_work_sync(&work->work);
6959 drm_crtc_cleanup(crtc);
6964 static void intel_unpin_work_fn(struct work_struct *__work)
6966 struct intel_unpin_work *work =
6967 container_of(__work, struct intel_unpin_work, work);
6968 struct drm_device *dev = work->crtc->dev;
6970 mutex_lock(&dev->struct_mutex);
6971 intel_unpin_fb_obj(work->old_fb_obj);
6972 drm_gem_object_unreference(&work->pending_flip_obj->base);
6973 drm_gem_object_unreference(&work->old_fb_obj->base);
6975 intel_update_fbc(dev);
6976 mutex_unlock(&dev->struct_mutex);
6978 BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
6979 atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
6984 static void do_intel_finish_page_flip(struct drm_device *dev,
6985 struct drm_crtc *crtc)
6987 drm_i915_private_t *dev_priv = dev->dev_private;
6988 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6989 struct intel_unpin_work *work;
6990 unsigned long flags;
6992 /* Ignore early vblank irqs */
6993 if (intel_crtc == NULL)
6996 spin_lock_irqsave(&dev->event_lock, flags);
6997 work = intel_crtc->unpin_work;
6999 /* Ensure we don't miss a work->pending update ... */
7002 if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
7003 spin_unlock_irqrestore(&dev->event_lock, flags);
7007 /* and that the unpin work is consistent wrt ->pending. */
7010 intel_crtc->unpin_work = NULL;
7013 drm_send_vblank_event(dev, intel_crtc->pipe, work->event);
7015 drm_vblank_put(dev, intel_crtc->pipe);
7017 spin_unlock_irqrestore(&dev->event_lock, flags);
7019 wake_up_all(&dev_priv->pending_flip_queue);
7021 queue_work(dev_priv->wq, &work->work);
7023 trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
7026 void intel_finish_page_flip(struct drm_device *dev, int pipe)
7028 drm_i915_private_t *dev_priv = dev->dev_private;
7029 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
7031 do_intel_finish_page_flip(dev, crtc);
7034 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
7036 drm_i915_private_t *dev_priv = dev->dev_private;
7037 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
7039 do_intel_finish_page_flip(dev, crtc);
7042 void intel_prepare_page_flip(struct drm_device *dev, int plane)
7044 drm_i915_private_t *dev_priv = dev->dev_private;
7045 struct intel_crtc *intel_crtc =
7046 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
7047 unsigned long flags;
7049 /* NB: An MMIO update of the plane base pointer will also
7050 * generate a page-flip completion irq, i.e. every modeset
7051 * is also accompanied by a spurious intel_prepare_page_flip().
7053 spin_lock_irqsave(&dev->event_lock, flags);
7054 if (intel_crtc->unpin_work)
7055 atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
7056 spin_unlock_irqrestore(&dev->event_lock, flags);
7059 inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
7061 /* Ensure that the work item is consistent when activating it ... */
7063 atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
7064 /* and that it is marked active as soon as the irq could fire. */
7068 static int intel_gen2_queue_flip(struct drm_device *dev,
7069 struct drm_crtc *crtc,
7070 struct drm_framebuffer *fb,
7071 struct drm_i915_gem_object *obj)
7073 struct drm_i915_private *dev_priv = dev->dev_private;
7074 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7076 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7079 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7083 ret = intel_ring_begin(ring, 6);
7087 /* Can't queue multiple flips, so wait for the previous
7088 * one to finish before executing the next.
7090 if (intel_crtc->plane)
7091 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
7093 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
7094 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
7095 intel_ring_emit(ring, MI_NOOP);
7096 intel_ring_emit(ring, MI_DISPLAY_FLIP |
7097 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7098 intel_ring_emit(ring, fb->pitches[0]);
7099 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7100 intel_ring_emit(ring, 0); /* aux display base address, unused */
7102 intel_mark_page_flip_active(intel_crtc);
7103 intel_ring_advance(ring);
7107 intel_unpin_fb_obj(obj);
7112 static int intel_gen3_queue_flip(struct drm_device *dev,
7113 struct drm_crtc *crtc,
7114 struct drm_framebuffer *fb,
7115 struct drm_i915_gem_object *obj)
7117 struct drm_i915_private *dev_priv = dev->dev_private;
7118 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7120 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7123 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7127 ret = intel_ring_begin(ring, 6);
7131 if (intel_crtc->plane)
7132 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
7134 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
7135 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
7136 intel_ring_emit(ring, MI_NOOP);
7137 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
7138 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7139 intel_ring_emit(ring, fb->pitches[0]);
7140 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7141 intel_ring_emit(ring, MI_NOOP);
7143 intel_mark_page_flip_active(intel_crtc);
7144 intel_ring_advance(ring);
7148 intel_unpin_fb_obj(obj);
7153 static int intel_gen4_queue_flip(struct drm_device *dev,
7154 struct drm_crtc *crtc,
7155 struct drm_framebuffer *fb,
7156 struct drm_i915_gem_object *obj)
7158 struct drm_i915_private *dev_priv = dev->dev_private;
7159 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7160 uint32_t pf, pipesrc;
7161 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7164 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7168 ret = intel_ring_begin(ring, 4);
7172 /* i965+ uses the linear or tiled offsets from the
7173 * Display Registers (which do not change across a page-flip)
7174 * so we need only reprogram the base address.
7176 intel_ring_emit(ring, MI_DISPLAY_FLIP |
7177 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7178 intel_ring_emit(ring, fb->pitches[0]);
7179 intel_ring_emit(ring,
7180 (obj->gtt_offset + intel_crtc->dspaddr_offset) |
7183 /* XXX Enabling the panel-fitter across page-flip is so far
7184 * untested on non-native modes, so ignore it for now.
7185 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
7188 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
7189 intel_ring_emit(ring, pf | pipesrc);
7191 intel_mark_page_flip_active(intel_crtc);
7192 intel_ring_advance(ring);
7196 intel_unpin_fb_obj(obj);
7201 static int intel_gen6_queue_flip(struct drm_device *dev,
7202 struct drm_crtc *crtc,
7203 struct drm_framebuffer *fb,
7204 struct drm_i915_gem_object *obj)
7206 struct drm_i915_private *dev_priv = dev->dev_private;
7207 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7208 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7209 uint32_t pf, pipesrc;
7212 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7216 ret = intel_ring_begin(ring, 4);
7220 intel_ring_emit(ring, MI_DISPLAY_FLIP |
7221 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7222 intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
7223 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7225 /* Contrary to the suggestions in the documentation,
7226 * "Enable Panel Fitter" does not seem to be required when page
7227 * flipping with a non-native mode, and worse causes a normal
7229 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
7232 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
7233 intel_ring_emit(ring, pf | pipesrc);
7235 intel_mark_page_flip_active(intel_crtc);
7236 intel_ring_advance(ring);
7240 intel_unpin_fb_obj(obj);
7246 * On gen7 we currently use the blit ring because (in early silicon at least)
7247 * the render ring doesn't give us interrpts for page flip completion, which
7248 * means clients will hang after the first flip is queued. Fortunately the
7249 * blit ring generates interrupts properly, so use it instead.
7251 static int intel_gen7_queue_flip(struct drm_device *dev,
7252 struct drm_crtc *crtc,
7253 struct drm_framebuffer *fb,
7254 struct drm_i915_gem_object *obj)
7256 struct drm_i915_private *dev_priv = dev->dev_private;
7257 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7258 struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
7259 uint32_t plane_bit = 0;
7262 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7266 switch(intel_crtc->plane) {
7268 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
7271 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
7274 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
7277 WARN_ONCE(1, "unknown plane in flip command\n");
7282 ret = intel_ring_begin(ring, 4);
7286 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
7287 intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
7288 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7289 intel_ring_emit(ring, (MI_NOOP));
7291 intel_mark_page_flip_active(intel_crtc);
7292 intel_ring_advance(ring);
7296 intel_unpin_fb_obj(obj);
7301 static int intel_default_queue_flip(struct drm_device *dev,
7302 struct drm_crtc *crtc,
7303 struct drm_framebuffer *fb,
7304 struct drm_i915_gem_object *obj)
7309 static int intel_crtc_page_flip(struct drm_crtc *crtc,
7310 struct drm_framebuffer *fb,
7311 struct drm_pending_vblank_event *event)
7313 struct drm_device *dev = crtc->dev;
7314 struct drm_i915_private *dev_priv = dev->dev_private;
7315 struct drm_framebuffer *old_fb = crtc->fb;
7316 struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj;
7317 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7318 struct intel_unpin_work *work;
7319 unsigned long flags;
7322 /* Can't change pixel format via MI display flips. */
7323 if (fb->pixel_format != crtc->fb->pixel_format)
7327 * TILEOFF/LINOFF registers can't be changed via MI display flips.
7328 * Note that pitch changes could also affect these register.
7330 if (INTEL_INFO(dev)->gen > 3 &&
7331 (fb->offsets[0] != crtc->fb->offsets[0] ||
7332 fb->pitches[0] != crtc->fb->pitches[0]))
7335 work = kzalloc(sizeof *work, GFP_KERNEL);
7339 work->event = event;
7341 work->old_fb_obj = to_intel_framebuffer(old_fb)->obj;
7342 INIT_WORK(&work->work, intel_unpin_work_fn);
7344 ret = drm_vblank_get(dev, intel_crtc->pipe);
7348 /* We borrow the event spin lock for protecting unpin_work */
7349 spin_lock_irqsave(&dev->event_lock, flags);
7350 if (intel_crtc->unpin_work) {
7351 spin_unlock_irqrestore(&dev->event_lock, flags);
7353 drm_vblank_put(dev, intel_crtc->pipe);
7355 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
7358 intel_crtc->unpin_work = work;
7359 spin_unlock_irqrestore(&dev->event_lock, flags);
7361 if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
7362 flush_workqueue(dev_priv->wq);
7364 ret = i915_mutex_lock_interruptible(dev);
7368 /* Reference the objects for the scheduled work. */
7369 drm_gem_object_reference(&work->old_fb_obj->base);
7370 drm_gem_object_reference(&obj->base);
7374 work->pending_flip_obj = obj;
7376 work->enable_stall_check = true;
7378 atomic_inc(&intel_crtc->unpin_work_count);
7379 intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
7381 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
7383 goto cleanup_pending;
7385 intel_disable_fbc(dev);
7386 intel_mark_fb_busy(obj);
7387 mutex_unlock(&dev->struct_mutex);
7389 trace_i915_flip_request(intel_crtc->plane, obj);
7394 atomic_dec(&intel_crtc->unpin_work_count);
7396 drm_gem_object_unreference(&work->old_fb_obj->base);
7397 drm_gem_object_unreference(&obj->base);
7398 mutex_unlock(&dev->struct_mutex);
7401 spin_lock_irqsave(&dev->event_lock, flags);
7402 intel_crtc->unpin_work = NULL;
7403 spin_unlock_irqrestore(&dev->event_lock, flags);
7405 drm_vblank_put(dev, intel_crtc->pipe);
7412 static struct drm_crtc_helper_funcs intel_helper_funcs = {
7413 .mode_set_base_atomic = intel_pipe_set_base_atomic,
7414 .load_lut = intel_crtc_load_lut,
7417 bool intel_encoder_check_is_cloned(struct intel_encoder *encoder)
7419 struct intel_encoder *other_encoder;
7420 struct drm_crtc *crtc = &encoder->new_crtc->base;
7425 list_for_each_entry(other_encoder,
7426 &crtc->dev->mode_config.encoder_list,
7429 if (&other_encoder->new_crtc->base != crtc ||
7430 encoder == other_encoder)
7439 static bool intel_encoder_crtc_ok(struct drm_encoder *encoder,
7440 struct drm_crtc *crtc)
7442 struct drm_device *dev;
7443 struct drm_crtc *tmp;
7446 WARN(!crtc, "checking null crtc?\n");
7450 list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
7456 if (encoder->possible_crtcs & crtc_mask)
7462 * intel_modeset_update_staged_output_state
7464 * Updates the staged output configuration state, e.g. after we've read out the
7467 static void intel_modeset_update_staged_output_state(struct drm_device *dev)
7469 struct intel_encoder *encoder;
7470 struct intel_connector *connector;
7472 list_for_each_entry(connector, &dev->mode_config.connector_list,
7474 connector->new_encoder =
7475 to_intel_encoder(connector->base.encoder);
7478 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7481 to_intel_crtc(encoder->base.crtc);
7486 * intel_modeset_commit_output_state
7488 * This function copies the stage display pipe configuration to the real one.
7490 static void intel_modeset_commit_output_state(struct drm_device *dev)
7492 struct intel_encoder *encoder;
7493 struct intel_connector *connector;
7495 list_for_each_entry(connector, &dev->mode_config.connector_list,
7497 connector->base.encoder = &connector->new_encoder->base;
7500 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7502 encoder->base.crtc = &encoder->new_crtc->base;
7507 pipe_config_set_bpp(struct drm_crtc *crtc,
7508 struct drm_framebuffer *fb,
7509 struct intel_crtc_config *pipe_config)
7511 struct drm_device *dev = crtc->dev;
7512 struct drm_connector *connector;
7515 switch (fb->pixel_format) {
7517 bpp = 8*3; /* since we go through a colormap */
7519 case DRM_FORMAT_XRGB1555:
7520 case DRM_FORMAT_ARGB1555:
7521 /* checked in intel_framebuffer_init already */
7522 if (WARN_ON(INTEL_INFO(dev)->gen > 3))
7524 case DRM_FORMAT_RGB565:
7525 bpp = 6*3; /* min is 18bpp */
7527 case DRM_FORMAT_XBGR8888:
7528 case DRM_FORMAT_ABGR8888:
7529 /* checked in intel_framebuffer_init already */
7530 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
7532 case DRM_FORMAT_XRGB8888:
7533 case DRM_FORMAT_ARGB8888:
7536 case DRM_FORMAT_XRGB2101010:
7537 case DRM_FORMAT_ARGB2101010:
7538 case DRM_FORMAT_XBGR2101010:
7539 case DRM_FORMAT_ABGR2101010:
7540 /* checked in intel_framebuffer_init already */
7541 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
7545 /* TODO: gen4+ supports 16 bpc floating point, too. */
7547 DRM_DEBUG_KMS("unsupported depth\n");
7551 pipe_config->pipe_bpp = bpp;
7553 /* Clamp display bpp to EDID value */
7554 list_for_each_entry(connector, &dev->mode_config.connector_list,
7556 if (connector->encoder && connector->encoder->crtc != crtc)
7559 /* Don't use an invalid EDID bpc value */
7560 if (connector->display_info.bpc &&
7561 connector->display_info.bpc * 3 < bpp) {
7562 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
7563 bpp, connector->display_info.bpc*3);
7564 pipe_config->pipe_bpp = connector->display_info.bpc*3;
7571 static struct intel_crtc_config *
7572 intel_modeset_pipe_config(struct drm_crtc *crtc,
7573 struct drm_framebuffer *fb,
7574 struct drm_display_mode *mode)
7576 struct drm_device *dev = crtc->dev;
7577 struct drm_encoder_helper_funcs *encoder_funcs;
7578 struct intel_encoder *encoder;
7579 struct intel_crtc_config *pipe_config;
7582 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
7584 return ERR_PTR(-ENOMEM);
7586 drm_mode_copy(&pipe_config->adjusted_mode, mode);
7587 drm_mode_copy(&pipe_config->requested_mode, mode);
7589 plane_bpp = pipe_config_set_bpp(crtc, fb, pipe_config);
7593 /* Pass our mode to the connectors and the CRTC to give them a chance to
7594 * adjust it according to limitations or connector properties, and also
7595 * a chance to reject the mode entirely.
7597 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7600 if (&encoder->new_crtc->base != crtc)
7603 if (encoder->compute_config) {
7604 if (!(encoder->compute_config(encoder, pipe_config))) {
7605 DRM_DEBUG_KMS("Encoder config failure\n");
7612 encoder_funcs = encoder->base.helper_private;
7613 if (!(encoder_funcs->mode_fixup(&encoder->base,
7614 &pipe_config->requested_mode,
7615 &pipe_config->adjusted_mode))) {
7616 DRM_DEBUG_KMS("Encoder fixup failed\n");
7621 if (!(intel_crtc_compute_config(crtc, pipe_config))) {
7622 DRM_DEBUG_KMS("CRTC fixup failed\n");
7625 DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
7627 pipe_config->dither = pipe_config->pipe_bpp != plane_bpp;
7628 DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
7629 plane_bpp, pipe_config->pipe_bpp, pipe_config->dither);
7634 return ERR_PTR(-EINVAL);
7637 /* Computes which crtcs are affected and sets the relevant bits in the mask. For
7638 * simplicity we use the crtc's pipe number (because it's easier to obtain). */
7640 intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
7641 unsigned *prepare_pipes, unsigned *disable_pipes)
7643 struct intel_crtc *intel_crtc;
7644 struct drm_device *dev = crtc->dev;
7645 struct intel_encoder *encoder;
7646 struct intel_connector *connector;
7647 struct drm_crtc *tmp_crtc;
7649 *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
7651 /* Check which crtcs have changed outputs connected to them, these need
7652 * to be part of the prepare_pipes mask. We don't (yet) support global
7653 * modeset across multiple crtcs, so modeset_pipes will only have one
7654 * bit set at most. */
7655 list_for_each_entry(connector, &dev->mode_config.connector_list,
7657 if (connector->base.encoder == &connector->new_encoder->base)
7660 if (connector->base.encoder) {
7661 tmp_crtc = connector->base.encoder->crtc;
7663 *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
7666 if (connector->new_encoder)
7668 1 << connector->new_encoder->new_crtc->pipe;
7671 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7673 if (encoder->base.crtc == &encoder->new_crtc->base)
7676 if (encoder->base.crtc) {
7677 tmp_crtc = encoder->base.crtc;
7679 *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
7682 if (encoder->new_crtc)
7683 *prepare_pipes |= 1 << encoder->new_crtc->pipe;
7686 /* Check for any pipes that will be fully disabled ... */
7687 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
7691 /* Don't try to disable disabled crtcs. */
7692 if (!intel_crtc->base.enabled)
7695 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7697 if (encoder->new_crtc == intel_crtc)
7702 *disable_pipes |= 1 << intel_crtc->pipe;
7706 /* set_mode is also used to update properties on life display pipes. */
7707 intel_crtc = to_intel_crtc(crtc);
7709 *prepare_pipes |= 1 << intel_crtc->pipe;
7711 /* We only support modeset on one single crtc, hence we need to do that
7712 * only for the passed in crtc iff we change anything else than just
7715 * This is actually not true, to be fully compatible with the old crtc
7716 * helper we automatically disable _any_ output (i.e. doesn't need to be
7717 * connected to the crtc we're modesetting on) if it's disconnected.
7718 * Which is a rather nutty api (since changed the output configuration
7719 * without userspace's explicit request can lead to confusion), but
7720 * alas. Hence we currently need to modeset on all pipes we prepare. */
7722 *modeset_pipes = *prepare_pipes;
7724 /* ... and mask these out. */
7725 *modeset_pipes &= ~(*disable_pipes);
7726 *prepare_pipes &= ~(*disable_pipes);
7729 static bool intel_crtc_in_use(struct drm_crtc *crtc)
7731 struct drm_encoder *encoder;
7732 struct drm_device *dev = crtc->dev;
7734 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
7735 if (encoder->crtc == crtc)
7742 intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
7744 struct intel_encoder *intel_encoder;
7745 struct intel_crtc *intel_crtc;
7746 struct drm_connector *connector;
7748 list_for_each_entry(intel_encoder, &dev->mode_config.encoder_list,
7750 if (!intel_encoder->base.crtc)
7753 intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
7755 if (prepare_pipes & (1 << intel_crtc->pipe))
7756 intel_encoder->connectors_active = false;
7759 intel_modeset_commit_output_state(dev);
7761 /* Update computed state. */
7762 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
7764 intel_crtc->base.enabled = intel_crtc_in_use(&intel_crtc->base);
7767 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
7768 if (!connector->encoder || !connector->encoder->crtc)
7771 intel_crtc = to_intel_crtc(connector->encoder->crtc);
7773 if (prepare_pipes & (1 << intel_crtc->pipe)) {
7774 struct drm_property *dpms_property =
7775 dev->mode_config.dpms_property;
7777 connector->dpms = DRM_MODE_DPMS_ON;
7778 drm_object_property_set_value(&connector->base,
7782 intel_encoder = to_intel_encoder(connector->encoder);
7783 intel_encoder->connectors_active = true;
7789 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
7790 list_for_each_entry((intel_crtc), \
7791 &(dev)->mode_config.crtc_list, \
7793 if (mask & (1 <<(intel_crtc)->pipe)) \
7796 intel_pipe_config_compare(struct intel_crtc_config *current_config,
7797 struct intel_crtc_config *pipe_config)
7799 if (current_config->has_pch_encoder != pipe_config->has_pch_encoder) {
7800 DRM_ERROR("mismatch in has_pch_encoder "
7801 "(expected %i, found %i)\n",
7802 current_config->has_pch_encoder,
7803 pipe_config->has_pch_encoder);
7811 intel_modeset_check_state(struct drm_device *dev)
7813 drm_i915_private_t *dev_priv = dev->dev_private;
7814 struct intel_crtc *crtc;
7815 struct intel_encoder *encoder;
7816 struct intel_connector *connector;
7817 struct intel_crtc_config pipe_config;
7819 list_for_each_entry(connector, &dev->mode_config.connector_list,
7821 /* This also checks the encoder/connector hw state with the
7822 * ->get_hw_state callbacks. */
7823 intel_connector_check_state(connector);
7825 WARN(&connector->new_encoder->base != connector->base.encoder,
7826 "connector's staged encoder doesn't match current encoder\n");
7829 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7831 bool enabled = false;
7832 bool active = false;
7833 enum pipe pipe, tracked_pipe;
7835 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
7836 encoder->base.base.id,
7837 drm_get_encoder_name(&encoder->base));
7839 WARN(&encoder->new_crtc->base != encoder->base.crtc,
7840 "encoder's stage crtc doesn't match current crtc\n");
7841 WARN(encoder->connectors_active && !encoder->base.crtc,
7842 "encoder's active_connectors set, but no crtc\n");
7844 list_for_each_entry(connector, &dev->mode_config.connector_list,
7846 if (connector->base.encoder != &encoder->base)
7849 if (connector->base.dpms != DRM_MODE_DPMS_OFF)
7852 WARN(!!encoder->base.crtc != enabled,
7853 "encoder's enabled state mismatch "
7854 "(expected %i, found %i)\n",
7855 !!encoder->base.crtc, enabled);
7856 WARN(active && !encoder->base.crtc,
7857 "active encoder with no crtc\n");
7859 WARN(encoder->connectors_active != active,
7860 "encoder's computed active state doesn't match tracked active state "
7861 "(expected %i, found %i)\n", active, encoder->connectors_active);
7863 active = encoder->get_hw_state(encoder, &pipe);
7864 WARN(active != encoder->connectors_active,
7865 "encoder's hw state doesn't match sw tracking "
7866 "(expected %i, found %i)\n",
7867 encoder->connectors_active, active);
7869 if (!encoder->base.crtc)
7872 tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
7873 WARN(active && pipe != tracked_pipe,
7874 "active encoder's pipe doesn't match"
7875 "(expected %i, found %i)\n",
7876 tracked_pipe, pipe);
7880 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
7882 bool enabled = false;
7883 bool active = false;
7885 DRM_DEBUG_KMS("[CRTC:%d]\n",
7886 crtc->base.base.id);
7888 WARN(crtc->active && !crtc->base.enabled,
7889 "active crtc, but not enabled in sw tracking\n");
7891 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7893 if (encoder->base.crtc != &crtc->base)
7896 if (encoder->connectors_active)
7899 WARN(active != crtc->active,
7900 "crtc's computed active state doesn't match tracked active state "
7901 "(expected %i, found %i)\n", active, crtc->active);
7902 WARN(enabled != crtc->base.enabled,
7903 "crtc's computed enabled state doesn't match tracked enabled state "
7904 "(expected %i, found %i)\n", enabled, crtc->base.enabled);
7906 memset(&pipe_config, 0, sizeof(pipe_config));
7907 active = dev_priv->display.get_pipe_config(crtc,
7909 WARN(crtc->active != active,
7910 "crtc active state doesn't match with hw state "
7911 "(expected %i, found %i)\n", crtc->active, active);
7914 !intel_pipe_config_compare(&crtc->config, &pipe_config),
7915 "pipe state doesn't match!\n");
7919 int intel_set_mode(struct drm_crtc *crtc,
7920 struct drm_display_mode *mode,
7921 int x, int y, struct drm_framebuffer *fb)
7923 struct drm_device *dev = crtc->dev;
7924 drm_i915_private_t *dev_priv = dev->dev_private;
7925 struct drm_display_mode *saved_mode, *saved_hwmode;
7926 struct intel_crtc_config *pipe_config = NULL;
7927 struct intel_crtc *intel_crtc;
7928 unsigned disable_pipes, prepare_pipes, modeset_pipes;
7931 saved_mode = kmalloc(2 * sizeof(*saved_mode), GFP_KERNEL);
7934 saved_hwmode = saved_mode + 1;
7936 intel_modeset_affected_pipes(crtc, &modeset_pipes,
7937 &prepare_pipes, &disable_pipes);
7939 *saved_hwmode = crtc->hwmode;
7940 *saved_mode = crtc->mode;
7942 /* Hack: Because we don't (yet) support global modeset on multiple
7943 * crtcs, we don't keep track of the new mode for more than one crtc.
7944 * Hence simply check whether any bit is set in modeset_pipes in all the
7945 * pieces of code that are not yet converted to deal with mutliple crtcs
7946 * changing their mode at the same time. */
7947 if (modeset_pipes) {
7948 pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
7949 if (IS_ERR(pipe_config)) {
7950 ret = PTR_ERR(pipe_config);
7957 DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
7958 modeset_pipes, prepare_pipes, disable_pipes);
7960 for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
7961 intel_crtc_disable(&intel_crtc->base);
7963 for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
7964 if (intel_crtc->base.enabled)
7965 dev_priv->display.crtc_disable(&intel_crtc->base);
7968 /* crtc->mode is already used by the ->mode_set callbacks, hence we need
7969 * to set it here already despite that we pass it down the callchain.
7971 if (modeset_pipes) {
7973 /* mode_set/enable/disable functions rely on a correct pipe
7975 to_intel_crtc(crtc)->config = *pipe_config;
7978 /* Only after disabling all output pipelines that will be changed can we
7979 * update the the output configuration. */
7980 intel_modeset_update_state(dev, prepare_pipes);
7982 if (dev_priv->display.modeset_global_resources)
7983 dev_priv->display.modeset_global_resources(dev);
7985 /* Set up the DPLL and any encoders state that needs to adjust or depend
7988 for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
7989 ret = intel_crtc_mode_set(&intel_crtc->base,
7995 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
7996 for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc)
7997 dev_priv->display.crtc_enable(&intel_crtc->base);
7999 if (modeset_pipes) {
8000 /* Store real post-adjustment hardware mode. */
8001 crtc->hwmode = pipe_config->adjusted_mode;
8003 /* Calculate and store various constants which
8004 * are later needed by vblank and swap-completion
8005 * timestamping. They are derived from true hwmode.
8007 drm_calc_timestamping_constants(crtc);
8010 /* FIXME: add subpixel order */
8012 if (ret && crtc->enabled) {
8013 crtc->hwmode = *saved_hwmode;
8014 crtc->mode = *saved_mode;
8016 intel_modeset_check_state(dev);
8025 void intel_crtc_restore_mode(struct drm_crtc *crtc)
8027 intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb);
8030 #undef for_each_intel_crtc_masked
8032 static void intel_set_config_free(struct intel_set_config *config)
8037 kfree(config->save_connector_encoders);
8038 kfree(config->save_encoder_crtcs);
8042 static int intel_set_config_save_state(struct drm_device *dev,
8043 struct intel_set_config *config)
8045 struct drm_encoder *encoder;
8046 struct drm_connector *connector;
8049 config->save_encoder_crtcs =
8050 kcalloc(dev->mode_config.num_encoder,
8051 sizeof(struct drm_crtc *), GFP_KERNEL);
8052 if (!config->save_encoder_crtcs)
8055 config->save_connector_encoders =
8056 kcalloc(dev->mode_config.num_connector,
8057 sizeof(struct drm_encoder *), GFP_KERNEL);
8058 if (!config->save_connector_encoders)
8061 /* Copy data. Note that driver private data is not affected.
8062 * Should anything bad happen only the expected state is
8063 * restored, not the drivers personal bookkeeping.
8066 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
8067 config->save_encoder_crtcs[count++] = encoder->crtc;
8071 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
8072 config->save_connector_encoders[count++] = connector->encoder;
8078 static void intel_set_config_restore_state(struct drm_device *dev,
8079 struct intel_set_config *config)
8081 struct intel_encoder *encoder;
8082 struct intel_connector *connector;
8086 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
8088 to_intel_crtc(config->save_encoder_crtcs[count++]);
8092 list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
8093 connector->new_encoder =
8094 to_intel_encoder(config->save_connector_encoders[count++]);
8099 intel_set_config_compute_mode_changes(struct drm_mode_set *set,
8100 struct intel_set_config *config)
8103 /* We should be able to check here if the fb has the same properties
8104 * and then just flip_or_move it */
8105 if (set->crtc->fb != set->fb) {
8106 /* If we have no fb then treat it as a full mode set */
8107 if (set->crtc->fb == NULL) {
8108 DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
8109 config->mode_changed = true;
8110 } else if (set->fb == NULL) {
8111 config->mode_changed = true;
8112 } else if (set->fb->pixel_format !=
8113 set->crtc->fb->pixel_format) {
8114 config->mode_changed = true;
8116 config->fb_changed = true;
8119 if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
8120 config->fb_changed = true;
8122 if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
8123 DRM_DEBUG_KMS("modes are different, full mode set\n");
8124 drm_mode_debug_printmodeline(&set->crtc->mode);
8125 drm_mode_debug_printmodeline(set->mode);
8126 config->mode_changed = true;
8131 intel_modeset_stage_output_state(struct drm_device *dev,
8132 struct drm_mode_set *set,
8133 struct intel_set_config *config)
8135 struct drm_crtc *new_crtc;
8136 struct intel_connector *connector;
8137 struct intel_encoder *encoder;
8140 /* The upper layers ensure that we either disable a crtc or have a list
8141 * of connectors. For paranoia, double-check this. */
8142 WARN_ON(!set->fb && (set->num_connectors != 0));
8143 WARN_ON(set->fb && (set->num_connectors == 0));
8146 list_for_each_entry(connector, &dev->mode_config.connector_list,
8148 /* Otherwise traverse passed in connector list and get encoders
8150 for (ro = 0; ro < set->num_connectors; ro++) {
8151 if (set->connectors[ro] == &connector->base) {
8152 connector->new_encoder = connector->encoder;
8157 /* If we disable the crtc, disable all its connectors. Also, if
8158 * the connector is on the changing crtc but not on the new
8159 * connector list, disable it. */
8160 if ((!set->fb || ro == set->num_connectors) &&
8161 connector->base.encoder &&
8162 connector->base.encoder->crtc == set->crtc) {
8163 connector->new_encoder = NULL;
8165 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
8166 connector->base.base.id,
8167 drm_get_connector_name(&connector->base));
8171 if (&connector->new_encoder->base != connector->base.encoder) {
8172 DRM_DEBUG_KMS("encoder changed, full mode switch\n");
8173 config->mode_changed = true;
8176 /* connector->new_encoder is now updated for all connectors. */
8178 /* Update crtc of enabled connectors. */
8180 list_for_each_entry(connector, &dev->mode_config.connector_list,
8182 if (!connector->new_encoder)
8185 new_crtc = connector->new_encoder->base.crtc;
8187 for (ro = 0; ro < set->num_connectors; ro++) {
8188 if (set->connectors[ro] == &connector->base)
8189 new_crtc = set->crtc;
8192 /* Make sure the new CRTC will work with the encoder */
8193 if (!intel_encoder_crtc_ok(&connector->new_encoder->base,
8197 connector->encoder->new_crtc = to_intel_crtc(new_crtc);
8199 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
8200 connector->base.base.id,
8201 drm_get_connector_name(&connector->base),
8205 /* Check for any encoders that needs to be disabled. */
8206 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8208 list_for_each_entry(connector,
8209 &dev->mode_config.connector_list,
8211 if (connector->new_encoder == encoder) {
8212 WARN_ON(!connector->new_encoder->new_crtc);
8217 encoder->new_crtc = NULL;
8219 /* Only now check for crtc changes so we don't miss encoders
8220 * that will be disabled. */
8221 if (&encoder->new_crtc->base != encoder->base.crtc) {
8222 DRM_DEBUG_KMS("crtc changed, full mode switch\n");
8223 config->mode_changed = true;
8226 /* Now we've also updated encoder->new_crtc for all encoders. */
8231 static int intel_crtc_set_config(struct drm_mode_set *set)
8233 struct drm_device *dev;
8234 struct drm_mode_set save_set;
8235 struct intel_set_config *config;
8240 BUG_ON(!set->crtc->helper_private);
8242 /* Enforce sane interface api - has been abused by the fb helper. */
8243 BUG_ON(!set->mode && set->fb);
8244 BUG_ON(set->fb && set->num_connectors == 0);
8247 DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
8248 set->crtc->base.id, set->fb->base.id,
8249 (int)set->num_connectors, set->x, set->y);
8251 DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
8254 dev = set->crtc->dev;
8257 config = kzalloc(sizeof(*config), GFP_KERNEL);
8261 ret = intel_set_config_save_state(dev, config);
8265 save_set.crtc = set->crtc;
8266 save_set.mode = &set->crtc->mode;
8267 save_set.x = set->crtc->x;
8268 save_set.y = set->crtc->y;
8269 save_set.fb = set->crtc->fb;
8271 /* Compute whether we need a full modeset, only an fb base update or no
8272 * change at all. In the future we might also check whether only the
8273 * mode changed, e.g. for LVDS where we only change the panel fitter in
8275 intel_set_config_compute_mode_changes(set, config);
8277 ret = intel_modeset_stage_output_state(dev, set, config);
8281 if (config->mode_changed) {
8283 DRM_DEBUG_KMS("attempting to set mode from"
8285 drm_mode_debug_printmodeline(set->mode);
8288 ret = intel_set_mode(set->crtc, set->mode,
8289 set->x, set->y, set->fb);
8291 DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n",
8292 set->crtc->base.id, ret);
8295 } else if (config->fb_changed) {
8296 intel_crtc_wait_for_pending_flips(set->crtc);
8298 ret = intel_pipe_set_base(set->crtc,
8299 set->x, set->y, set->fb);
8302 intel_set_config_free(config);
8307 intel_set_config_restore_state(dev, config);
8309 /* Try to restore the config */
8310 if (config->mode_changed &&
8311 intel_set_mode(save_set.crtc, save_set.mode,
8312 save_set.x, save_set.y, save_set.fb))
8313 DRM_ERROR("failed to restore config after modeset failure\n");
8316 intel_set_config_free(config);
8320 static const struct drm_crtc_funcs intel_crtc_funcs = {
8321 .cursor_set = intel_crtc_cursor_set,
8322 .cursor_move = intel_crtc_cursor_move,
8323 .gamma_set = intel_crtc_gamma_set,
8324 .set_config = intel_crtc_set_config,
8325 .destroy = intel_crtc_destroy,
8326 .page_flip = intel_crtc_page_flip,
8329 static void intel_cpu_pll_init(struct drm_device *dev)
8332 intel_ddi_pll_init(dev);
8335 static void intel_pch_pll_init(struct drm_device *dev)
8337 drm_i915_private_t *dev_priv = dev->dev_private;
8340 if (dev_priv->num_pch_pll == 0) {
8341 DRM_DEBUG_KMS("No PCH PLLs on this hardware, skipping initialisation\n");
8345 for (i = 0; i < dev_priv->num_pch_pll; i++) {
8346 dev_priv->pch_plls[i].pll_reg = _PCH_DPLL(i);
8347 dev_priv->pch_plls[i].fp0_reg = _PCH_FP0(i);
8348 dev_priv->pch_plls[i].fp1_reg = _PCH_FP1(i);
8352 static void intel_crtc_init(struct drm_device *dev, int pipe)
8354 drm_i915_private_t *dev_priv = dev->dev_private;
8355 struct intel_crtc *intel_crtc;
8358 intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
8359 if (intel_crtc == NULL)
8362 drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
8364 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
8365 for (i = 0; i < 256; i++) {
8366 intel_crtc->lut_r[i] = i;
8367 intel_crtc->lut_g[i] = i;
8368 intel_crtc->lut_b[i] = i;
8371 /* Swap pipes & planes for FBC on pre-965 */
8372 intel_crtc->pipe = pipe;
8373 intel_crtc->plane = pipe;
8374 intel_crtc->cpu_transcoder = pipe;
8375 if (IS_MOBILE(dev) && IS_GEN3(dev)) {
8376 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
8377 intel_crtc->plane = !pipe;
8380 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
8381 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
8382 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
8383 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
8385 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
8388 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
8389 struct drm_file *file)
8391 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
8392 struct drm_mode_object *drmmode_obj;
8393 struct intel_crtc *crtc;
8395 if (!drm_core_check_feature(dev, DRIVER_MODESET))
8398 drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
8399 DRM_MODE_OBJECT_CRTC);
8402 DRM_ERROR("no such CRTC id\n");
8406 crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
8407 pipe_from_crtc_id->pipe = crtc->pipe;
8412 static int intel_encoder_clones(struct intel_encoder *encoder)
8414 struct drm_device *dev = encoder->base.dev;
8415 struct intel_encoder *source_encoder;
8419 list_for_each_entry(source_encoder,
8420 &dev->mode_config.encoder_list, base.head) {
8422 if (encoder == source_encoder)
8423 index_mask |= (1 << entry);
8425 /* Intel hw has only one MUX where enocoders could be cloned. */
8426 if (encoder->cloneable && source_encoder->cloneable)
8427 index_mask |= (1 << entry);
8435 static bool has_edp_a(struct drm_device *dev)
8437 struct drm_i915_private *dev_priv = dev->dev_private;
8439 if (!IS_MOBILE(dev))
8442 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
8446 (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
8452 static void intel_setup_outputs(struct drm_device *dev)
8454 struct drm_i915_private *dev_priv = dev->dev_private;
8455 struct intel_encoder *encoder;
8456 bool dpd_is_edp = false;
8459 has_lvds = intel_lvds_init(dev);
8460 if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
8461 /* disable the panel fitter on everything but LVDS */
8462 I915_WRITE(PFIT_CONTROL, 0);
8465 if (!(HAS_DDI(dev) && (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)))
8466 intel_crt_init(dev);
8471 /* Haswell uses DDI functions to detect digital outputs */
8472 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
8473 /* DDI A only supports eDP */
8475 intel_ddi_init(dev, PORT_A);
8477 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
8479 found = I915_READ(SFUSE_STRAP);
8481 if (found & SFUSE_STRAP_DDIB_DETECTED)
8482 intel_ddi_init(dev, PORT_B);
8483 if (found & SFUSE_STRAP_DDIC_DETECTED)
8484 intel_ddi_init(dev, PORT_C);
8485 if (found & SFUSE_STRAP_DDID_DETECTED)
8486 intel_ddi_init(dev, PORT_D);
8487 } else if (HAS_PCH_SPLIT(dev)) {
8489 dpd_is_edp = intel_dpd_is_edp(dev);
8492 intel_dp_init(dev, DP_A, PORT_A);
8494 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
8495 /* PCH SDVOB multiplex with HDMIB */
8496 found = intel_sdvo_init(dev, PCH_SDVOB, true);
8498 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
8499 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
8500 intel_dp_init(dev, PCH_DP_B, PORT_B);
8503 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
8504 intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
8506 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
8507 intel_hdmi_init(dev, PCH_HDMID, PORT_D);
8509 if (I915_READ(PCH_DP_C) & DP_DETECTED)
8510 intel_dp_init(dev, PCH_DP_C, PORT_C);
8512 if (I915_READ(PCH_DP_D) & DP_DETECTED)
8513 intel_dp_init(dev, PCH_DP_D, PORT_D);
8514 } else if (IS_VALLEYVIEW(dev)) {
8515 /* Check for built-in panel first. Shares lanes with HDMI on SDVOC */
8516 if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
8517 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
8519 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) {
8520 intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
8522 if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
8523 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
8525 } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
8528 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
8529 DRM_DEBUG_KMS("probing SDVOB\n");
8530 found = intel_sdvo_init(dev, GEN3_SDVOB, true);
8531 if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
8532 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
8533 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
8536 if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
8537 DRM_DEBUG_KMS("probing DP_B\n");
8538 intel_dp_init(dev, DP_B, PORT_B);
8542 /* Before G4X SDVOC doesn't have its own detect register */
8544 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
8545 DRM_DEBUG_KMS("probing SDVOC\n");
8546 found = intel_sdvo_init(dev, GEN3_SDVOC, false);
8549 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
8551 if (SUPPORTS_INTEGRATED_HDMI(dev)) {
8552 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
8553 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
8555 if (SUPPORTS_INTEGRATED_DP(dev)) {
8556 DRM_DEBUG_KMS("probing DP_C\n");
8557 intel_dp_init(dev, DP_C, PORT_C);
8561 if (SUPPORTS_INTEGRATED_DP(dev) &&
8562 (I915_READ(DP_D) & DP_DETECTED)) {
8563 DRM_DEBUG_KMS("probing DP_D\n");
8564 intel_dp_init(dev, DP_D, PORT_D);
8566 } else if (IS_GEN2(dev))
8567 intel_dvo_init(dev);
8569 if (SUPPORTS_TV(dev))
8572 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
8573 encoder->base.possible_crtcs = encoder->crtc_mask;
8574 encoder->base.possible_clones =
8575 intel_encoder_clones(encoder);
8578 intel_init_pch_refclk(dev);
8580 drm_helper_move_panel_connectors_to_head(dev);
8583 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
8585 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
8587 drm_framebuffer_cleanup(fb);
8588 drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
8593 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
8594 struct drm_file *file,
8595 unsigned int *handle)
8597 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
8598 struct drm_i915_gem_object *obj = intel_fb->obj;
8600 return drm_gem_handle_create(file, &obj->base, handle);
8603 static const struct drm_framebuffer_funcs intel_fb_funcs = {
8604 .destroy = intel_user_framebuffer_destroy,
8605 .create_handle = intel_user_framebuffer_create_handle,
8608 int intel_framebuffer_init(struct drm_device *dev,
8609 struct intel_framebuffer *intel_fb,
8610 struct drm_mode_fb_cmd2 *mode_cmd,
8611 struct drm_i915_gem_object *obj)
8615 if (obj->tiling_mode == I915_TILING_Y) {
8616 DRM_DEBUG("hardware does not support tiling Y\n");
8620 if (mode_cmd->pitches[0] & 63) {
8621 DRM_DEBUG("pitch (%d) must be at least 64 byte aligned\n",
8622 mode_cmd->pitches[0]);
8626 /* FIXME <= Gen4 stride limits are bit unclear */
8627 if (mode_cmd->pitches[0] > 32768) {
8628 DRM_DEBUG("pitch (%d) must be at less than 32768\n",
8629 mode_cmd->pitches[0]);
8633 if (obj->tiling_mode != I915_TILING_NONE &&
8634 mode_cmd->pitches[0] != obj->stride) {
8635 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
8636 mode_cmd->pitches[0], obj->stride);
8640 /* Reject formats not supported by any plane early. */
8641 switch (mode_cmd->pixel_format) {
8643 case DRM_FORMAT_RGB565:
8644 case DRM_FORMAT_XRGB8888:
8645 case DRM_FORMAT_ARGB8888:
8647 case DRM_FORMAT_XRGB1555:
8648 case DRM_FORMAT_ARGB1555:
8649 if (INTEL_INFO(dev)->gen > 3) {
8650 DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format);
8654 case DRM_FORMAT_XBGR8888:
8655 case DRM_FORMAT_ABGR8888:
8656 case DRM_FORMAT_XRGB2101010:
8657 case DRM_FORMAT_ARGB2101010:
8658 case DRM_FORMAT_XBGR2101010:
8659 case DRM_FORMAT_ABGR2101010:
8660 if (INTEL_INFO(dev)->gen < 4) {
8661 DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format);
8665 case DRM_FORMAT_YUYV:
8666 case DRM_FORMAT_UYVY:
8667 case DRM_FORMAT_YVYU:
8668 case DRM_FORMAT_VYUY:
8669 if (INTEL_INFO(dev)->gen < 5) {
8670 DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format);
8675 DRM_DEBUG("unsupported pixel format 0x%08x\n", mode_cmd->pixel_format);
8679 /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
8680 if (mode_cmd->offsets[0] != 0)
8683 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
8684 intel_fb->obj = obj;
8686 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
8688 DRM_ERROR("framebuffer init failed %d\n", ret);
8695 static struct drm_framebuffer *
8696 intel_user_framebuffer_create(struct drm_device *dev,
8697 struct drm_file *filp,
8698 struct drm_mode_fb_cmd2 *mode_cmd)
8700 struct drm_i915_gem_object *obj;
8702 obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
8703 mode_cmd->handles[0]));
8704 if (&obj->base == NULL)
8705 return ERR_PTR(-ENOENT);
8707 return intel_framebuffer_create(dev, mode_cmd, obj);
8710 static const struct drm_mode_config_funcs intel_mode_funcs = {
8711 .fb_create = intel_user_framebuffer_create,
8712 .output_poll_changed = intel_fb_output_poll_changed,
8715 /* Set up chip specific display functions */
8716 static void intel_init_display(struct drm_device *dev)
8718 struct drm_i915_private *dev_priv = dev->dev_private;
8721 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
8722 dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
8723 dev_priv->display.crtc_enable = haswell_crtc_enable;
8724 dev_priv->display.crtc_disable = haswell_crtc_disable;
8725 dev_priv->display.off = haswell_crtc_off;
8726 dev_priv->display.update_plane = ironlake_update_plane;
8727 } else if (HAS_PCH_SPLIT(dev)) {
8728 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
8729 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
8730 dev_priv->display.crtc_enable = ironlake_crtc_enable;
8731 dev_priv->display.crtc_disable = ironlake_crtc_disable;
8732 dev_priv->display.off = ironlake_crtc_off;
8733 dev_priv->display.update_plane = ironlake_update_plane;
8735 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
8736 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
8737 dev_priv->display.crtc_enable = i9xx_crtc_enable;
8738 dev_priv->display.crtc_disable = i9xx_crtc_disable;
8739 dev_priv->display.off = i9xx_crtc_off;
8740 dev_priv->display.update_plane = i9xx_update_plane;
8743 /* Returns the core display clock speed */
8744 if (IS_VALLEYVIEW(dev))
8745 dev_priv->display.get_display_clock_speed =
8746 valleyview_get_display_clock_speed;
8747 else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
8748 dev_priv->display.get_display_clock_speed =
8749 i945_get_display_clock_speed;
8750 else if (IS_I915G(dev))
8751 dev_priv->display.get_display_clock_speed =
8752 i915_get_display_clock_speed;
8753 else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
8754 dev_priv->display.get_display_clock_speed =
8755 i9xx_misc_get_display_clock_speed;
8756 else if (IS_I915GM(dev))
8757 dev_priv->display.get_display_clock_speed =
8758 i915gm_get_display_clock_speed;
8759 else if (IS_I865G(dev))
8760 dev_priv->display.get_display_clock_speed =
8761 i865_get_display_clock_speed;
8762 else if (IS_I85X(dev))
8763 dev_priv->display.get_display_clock_speed =
8764 i855_get_display_clock_speed;
8766 dev_priv->display.get_display_clock_speed =
8767 i830_get_display_clock_speed;
8769 if (HAS_PCH_SPLIT(dev)) {
8771 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
8772 dev_priv->display.write_eld = ironlake_write_eld;
8773 } else if (IS_GEN6(dev)) {
8774 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
8775 dev_priv->display.write_eld = ironlake_write_eld;
8776 } else if (IS_IVYBRIDGE(dev)) {
8777 /* FIXME: detect B0+ stepping and use auto training */
8778 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
8779 dev_priv->display.write_eld = ironlake_write_eld;
8780 dev_priv->display.modeset_global_resources =
8781 ivb_modeset_global_resources;
8782 } else if (IS_HASWELL(dev)) {
8783 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
8784 dev_priv->display.write_eld = haswell_write_eld;
8785 dev_priv->display.modeset_global_resources =
8786 haswell_modeset_global_resources;
8788 } else if (IS_G4X(dev)) {
8789 dev_priv->display.write_eld = g4x_write_eld;
8792 /* Default just returns -ENODEV to indicate unsupported */
8793 dev_priv->display.queue_flip = intel_default_queue_flip;
8795 switch (INTEL_INFO(dev)->gen) {
8797 dev_priv->display.queue_flip = intel_gen2_queue_flip;
8801 dev_priv->display.queue_flip = intel_gen3_queue_flip;
8806 dev_priv->display.queue_flip = intel_gen4_queue_flip;
8810 dev_priv->display.queue_flip = intel_gen6_queue_flip;
8813 dev_priv->display.queue_flip = intel_gen7_queue_flip;
8819 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
8820 * resume, or other times. This quirk makes sure that's the case for
8823 static void quirk_pipea_force(struct drm_device *dev)
8825 struct drm_i915_private *dev_priv = dev->dev_private;
8827 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
8828 DRM_INFO("applying pipe a force quirk\n");
8832 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
8834 static void quirk_ssc_force_disable(struct drm_device *dev)
8836 struct drm_i915_private *dev_priv = dev->dev_private;
8837 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
8838 DRM_INFO("applying lvds SSC disable quirk\n");
8842 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
8845 static void quirk_invert_brightness(struct drm_device *dev)
8847 struct drm_i915_private *dev_priv = dev->dev_private;
8848 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
8849 DRM_INFO("applying inverted panel brightness quirk\n");
8852 struct intel_quirk {
8854 int subsystem_vendor;
8855 int subsystem_device;
8856 void (*hook)(struct drm_device *dev);
8859 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
8860 struct intel_dmi_quirk {
8861 void (*hook)(struct drm_device *dev);
8862 const struct dmi_system_id (*dmi_id_list)[];
8865 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
8867 DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
8871 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
8873 .dmi_id_list = &(const struct dmi_system_id[]) {
8875 .callback = intel_dmi_reverse_brightness,
8876 .ident = "NCR Corporation",
8877 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
8878 DMI_MATCH(DMI_PRODUCT_NAME, ""),
8881 { } /* terminating entry */
8883 .hook = quirk_invert_brightness,
8887 static struct intel_quirk intel_quirks[] = {
8888 /* HP Mini needs pipe A force quirk (LP: #322104) */
8889 { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
8891 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
8892 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
8894 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
8895 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
8897 /* 830/845 need to leave pipe A & dpll A up */
8898 { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
8899 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
8901 /* Lenovo U160 cannot use SSC on LVDS */
8902 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
8904 /* Sony Vaio Y cannot use SSC on LVDS */
8905 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
8907 /* Acer Aspire 5734Z must invert backlight brightness */
8908 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
8910 /* Acer/eMachines G725 */
8911 { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
8913 /* Acer/eMachines e725 */
8914 { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
8916 /* Acer/Packard Bell NCL20 */
8917 { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
8919 /* Acer Aspire 4736Z */
8920 { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
8923 static void intel_init_quirks(struct drm_device *dev)
8925 struct pci_dev *d = dev->pdev;
8928 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
8929 struct intel_quirk *q = &intel_quirks[i];
8931 if (d->device == q->device &&
8932 (d->subsystem_vendor == q->subsystem_vendor ||
8933 q->subsystem_vendor == PCI_ANY_ID) &&
8934 (d->subsystem_device == q->subsystem_device ||
8935 q->subsystem_device == PCI_ANY_ID))
8938 for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
8939 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
8940 intel_dmi_quirks[i].hook(dev);
8944 /* Disable the VGA plane that we never use */
8945 static void i915_disable_vga(struct drm_device *dev)
8947 struct drm_i915_private *dev_priv = dev->dev_private;
8949 u32 vga_reg = i915_vgacntrl_reg(dev);
8951 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
8952 outb(SR01, VGA_SR_INDEX);
8953 sr1 = inb(VGA_SR_DATA);
8954 outb(sr1 | 1<<5, VGA_SR_DATA);
8955 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
8958 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
8959 POSTING_READ(vga_reg);
8962 void intel_modeset_init_hw(struct drm_device *dev)
8964 intel_init_power_well(dev);
8966 intel_prepare_ddi(dev);
8968 intel_init_clock_gating(dev);
8970 mutex_lock(&dev->struct_mutex);
8971 intel_enable_gt_powersave(dev);
8972 mutex_unlock(&dev->struct_mutex);
8975 void intel_modeset_init(struct drm_device *dev)
8977 struct drm_i915_private *dev_priv = dev->dev_private;
8980 drm_mode_config_init(dev);
8982 dev->mode_config.min_width = 0;
8983 dev->mode_config.min_height = 0;
8985 dev->mode_config.preferred_depth = 24;
8986 dev->mode_config.prefer_shadow = 1;
8988 dev->mode_config.funcs = &intel_mode_funcs;
8990 intel_init_quirks(dev);
8994 if (INTEL_INFO(dev)->num_pipes == 0)
8997 intel_init_display(dev);
9000 dev->mode_config.max_width = 2048;
9001 dev->mode_config.max_height = 2048;
9002 } else if (IS_GEN3(dev)) {
9003 dev->mode_config.max_width = 4096;
9004 dev->mode_config.max_height = 4096;
9006 dev->mode_config.max_width = 8192;
9007 dev->mode_config.max_height = 8192;
9009 dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
9011 DRM_DEBUG_KMS("%d display pipe%s available.\n",
9012 INTEL_INFO(dev)->num_pipes,
9013 INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
9015 for (i = 0; i < INTEL_INFO(dev)->num_pipes; i++) {
9016 intel_crtc_init(dev, i);
9017 for (j = 0; j < dev_priv->num_plane; j++) {
9018 ret = intel_plane_init(dev, i, j);
9020 DRM_DEBUG_KMS("pipe %d plane %d init failed: %d\n",
9025 intel_cpu_pll_init(dev);
9026 intel_pch_pll_init(dev);
9028 /* Just disable it once at startup */
9029 i915_disable_vga(dev);
9030 intel_setup_outputs(dev);
9032 /* Just in case the BIOS is doing something questionable. */
9033 intel_disable_fbc(dev);
9037 intel_connector_break_all_links(struct intel_connector *connector)
9039 connector->base.dpms = DRM_MODE_DPMS_OFF;
9040 connector->base.encoder = NULL;
9041 connector->encoder->connectors_active = false;
9042 connector->encoder->base.crtc = NULL;
9045 static void intel_enable_pipe_a(struct drm_device *dev)
9047 struct intel_connector *connector;
9048 struct drm_connector *crt = NULL;
9049 struct intel_load_detect_pipe load_detect_temp;
9051 /* We can't just switch on the pipe A, we need to set things up with a
9052 * proper mode and output configuration. As a gross hack, enable pipe A
9053 * by enabling the load detect pipe once. */
9054 list_for_each_entry(connector,
9055 &dev->mode_config.connector_list,
9057 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
9058 crt = &connector->base;
9066 if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp))
9067 intel_release_load_detect_pipe(crt, &load_detect_temp);
9073 intel_check_plane_mapping(struct intel_crtc *crtc)
9075 struct drm_device *dev = crtc->base.dev;
9076 struct drm_i915_private *dev_priv = dev->dev_private;
9079 if (INTEL_INFO(dev)->num_pipes == 1)
9082 reg = DSPCNTR(!crtc->plane);
9083 val = I915_READ(reg);
9085 if ((val & DISPLAY_PLANE_ENABLE) &&
9086 (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
9092 static void intel_sanitize_crtc(struct intel_crtc *crtc)
9094 struct drm_device *dev = crtc->base.dev;
9095 struct drm_i915_private *dev_priv = dev->dev_private;
9098 /* Clear any frame start delays used for debugging left by the BIOS */
9099 reg = PIPECONF(crtc->cpu_transcoder);
9100 I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
9102 /* We need to sanitize the plane -> pipe mapping first because this will
9103 * disable the crtc (and hence change the state) if it is wrong. Note
9104 * that gen4+ has a fixed plane -> pipe mapping. */
9105 if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
9106 struct intel_connector *connector;
9109 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
9110 crtc->base.base.id);
9112 /* Pipe has the wrong plane attached and the plane is active.
9113 * Temporarily change the plane mapping and disable everything
9115 plane = crtc->plane;
9116 crtc->plane = !plane;
9117 dev_priv->display.crtc_disable(&crtc->base);
9118 crtc->plane = plane;
9120 /* ... and break all links. */
9121 list_for_each_entry(connector, &dev->mode_config.connector_list,
9123 if (connector->encoder->base.crtc != &crtc->base)
9126 intel_connector_break_all_links(connector);
9129 WARN_ON(crtc->active);
9130 crtc->base.enabled = false;
9133 if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
9134 crtc->pipe == PIPE_A && !crtc->active) {
9135 /* BIOS forgot to enable pipe A, this mostly happens after
9136 * resume. Force-enable the pipe to fix this, the update_dpms
9137 * call below we restore the pipe to the right state, but leave
9138 * the required bits on. */
9139 intel_enable_pipe_a(dev);
9142 /* Adjust the state of the output pipe according to whether we
9143 * have active connectors/encoders. */
9144 intel_crtc_update_dpms(&crtc->base);
9146 if (crtc->active != crtc->base.enabled) {
9147 struct intel_encoder *encoder;
9149 /* This can happen either due to bugs in the get_hw_state
9150 * functions or because the pipe is force-enabled due to the
9152 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
9154 crtc->base.enabled ? "enabled" : "disabled",
9155 crtc->active ? "enabled" : "disabled");
9157 crtc->base.enabled = crtc->active;
9159 /* Because we only establish the connector -> encoder ->
9160 * crtc links if something is active, this means the
9161 * crtc is now deactivated. Break the links. connector
9162 * -> encoder links are only establish when things are
9163 * actually up, hence no need to break them. */
9164 WARN_ON(crtc->active);
9166 for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
9167 WARN_ON(encoder->connectors_active);
9168 encoder->base.crtc = NULL;
9173 static void intel_sanitize_encoder(struct intel_encoder *encoder)
9175 struct intel_connector *connector;
9176 struct drm_device *dev = encoder->base.dev;
9178 /* We need to check both for a crtc link (meaning that the
9179 * encoder is active and trying to read from a pipe) and the
9180 * pipe itself being active. */
9181 bool has_active_crtc = encoder->base.crtc &&
9182 to_intel_crtc(encoder->base.crtc)->active;
9184 if (encoder->connectors_active && !has_active_crtc) {
9185 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
9186 encoder->base.base.id,
9187 drm_get_encoder_name(&encoder->base));
9189 /* Connector is active, but has no active pipe. This is
9190 * fallout from our resume register restoring. Disable
9191 * the encoder manually again. */
9192 if (encoder->base.crtc) {
9193 DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
9194 encoder->base.base.id,
9195 drm_get_encoder_name(&encoder->base));
9196 encoder->disable(encoder);
9199 /* Inconsistent output/port/pipe state happens presumably due to
9200 * a bug in one of the get_hw_state functions. Or someplace else
9201 * in our code, like the register restore mess on resume. Clamp
9202 * things to off as a safer default. */
9203 list_for_each_entry(connector,
9204 &dev->mode_config.connector_list,
9206 if (connector->encoder != encoder)
9209 intel_connector_break_all_links(connector);
9212 /* Enabled encoders without active connectors will be fixed in
9213 * the crtc fixup. */
9216 void i915_redisable_vga(struct drm_device *dev)
9218 struct drm_i915_private *dev_priv = dev->dev_private;
9219 u32 vga_reg = i915_vgacntrl_reg(dev);
9221 if (I915_READ(vga_reg) != VGA_DISP_DISABLE) {
9222 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
9223 i915_disable_vga(dev);
9227 /* Scan out the current hw modeset state, sanitizes it and maps it into the drm
9228 * and i915 state tracking structures. */
9229 void intel_modeset_setup_hw_state(struct drm_device *dev,
9232 struct drm_i915_private *dev_priv = dev->dev_private;
9235 struct drm_plane *plane;
9236 struct intel_crtc *crtc;
9237 struct intel_encoder *encoder;
9238 struct intel_connector *connector;
9241 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
9243 if (tmp & TRANS_DDI_FUNC_ENABLE) {
9244 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
9245 case TRANS_DDI_EDP_INPUT_A_ON:
9246 case TRANS_DDI_EDP_INPUT_A_ONOFF:
9249 case TRANS_DDI_EDP_INPUT_B_ONOFF:
9252 case TRANS_DDI_EDP_INPUT_C_ONOFF:
9256 /* A bogus value has been programmed, disable
9258 WARN(1, "Bogus eDP source %08x\n", tmp);
9259 intel_ddi_disable_transcoder_func(dev_priv,
9264 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
9265 crtc->cpu_transcoder = TRANSCODER_EDP;
9267 DRM_DEBUG_KMS("Pipe %c using transcoder EDP\n",
9273 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9275 memset(&crtc->config, 0, sizeof(crtc->config));
9276 crtc->active = dev_priv->display.get_pipe_config(crtc,
9279 crtc->base.enabled = crtc->active;
9281 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
9283 crtc->active ? "enabled" : "disabled");
9287 intel_ddi_setup_hw_pll_state(dev);
9289 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9293 if (encoder->get_hw_state(encoder, &pipe)) {
9294 encoder->base.crtc =
9295 dev_priv->pipe_to_crtc_mapping[pipe];
9297 encoder->base.crtc = NULL;
9300 encoder->connectors_active = false;
9301 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe=%i\n",
9302 encoder->base.base.id,
9303 drm_get_encoder_name(&encoder->base),
9304 encoder->base.crtc ? "enabled" : "disabled",
9308 list_for_each_entry(connector, &dev->mode_config.connector_list,
9310 if (connector->get_hw_state(connector)) {
9311 connector->base.dpms = DRM_MODE_DPMS_ON;
9312 connector->encoder->connectors_active = true;
9313 connector->base.encoder = &connector->encoder->base;
9315 connector->base.dpms = DRM_MODE_DPMS_OFF;
9316 connector->base.encoder = NULL;
9318 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
9319 connector->base.base.id,
9320 drm_get_connector_name(&connector->base),
9321 connector->base.encoder ? "enabled" : "disabled");
9324 /* HW state is read out, now we need to sanitize this mess. */
9325 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9327 intel_sanitize_encoder(encoder);
9330 for_each_pipe(pipe) {
9331 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
9332 intel_sanitize_crtc(crtc);
9335 if (force_restore) {
9336 for_each_pipe(pipe) {
9337 struct drm_crtc *crtc =
9338 dev_priv->pipe_to_crtc_mapping[pipe];
9339 intel_crtc_restore_mode(crtc);
9341 list_for_each_entry(plane, &dev->mode_config.plane_list, head)
9342 intel_plane_restore(plane);
9344 i915_redisable_vga(dev);
9346 intel_modeset_update_staged_output_state(dev);
9349 intel_modeset_check_state(dev);
9351 drm_mode_config_reset(dev);
9354 void intel_modeset_gem_init(struct drm_device *dev)
9356 intel_modeset_init_hw(dev);
9358 intel_setup_overlay(dev);
9360 intel_modeset_setup_hw_state(dev, false);
9363 void intel_modeset_cleanup(struct drm_device *dev)
9365 struct drm_i915_private *dev_priv = dev->dev_private;
9366 struct drm_crtc *crtc;
9367 struct intel_crtc *intel_crtc;
9369 drm_kms_helper_poll_fini(dev);
9370 mutex_lock(&dev->struct_mutex);
9372 intel_unregister_dsm_handler();
9375 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
9376 /* Skip inactive CRTCs */
9380 intel_crtc = to_intel_crtc(crtc);
9381 intel_increase_pllclock(crtc);
9384 intel_disable_fbc(dev);
9386 intel_disable_gt_powersave(dev);
9388 ironlake_teardown_rc6(dev);
9390 if (IS_VALLEYVIEW(dev))
9393 mutex_unlock(&dev->struct_mutex);
9395 /* Disable the irq before mode object teardown, for the irq might
9396 * enqueue unpin/hotplug work. */
9397 drm_irq_uninstall(dev);
9398 cancel_work_sync(&dev_priv->hotplug_work);
9399 cancel_work_sync(&dev_priv->rps.work);
9401 /* flush any delayed tasks or pending work */
9402 flush_scheduled_work();
9404 drm_mode_config_cleanup(dev);
9406 intel_cleanup_overlay(dev);
9410 * Return which encoder is currently attached for connector.
9412 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
9414 return &intel_attached_encoder(connector)->base;
9417 void intel_connector_attach_encoder(struct intel_connector *connector,
9418 struct intel_encoder *encoder)
9420 connector->encoder = encoder;
9421 drm_mode_connector_attach_encoder(&connector->base,
9426 * set vga decode state - true == enable VGA decode
9428 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
9430 struct drm_i915_private *dev_priv = dev->dev_private;
9433 pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
9435 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
9437 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
9438 pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
9442 #ifdef CONFIG_DEBUG_FS
9443 #include <linux/seq_file.h>
9445 struct intel_display_error_state {
9446 struct intel_cursor_error_state {
9451 } cursor[I915_MAX_PIPES];
9453 struct intel_pipe_error_state {
9463 } pipe[I915_MAX_PIPES];
9465 struct intel_plane_error_state {
9473 } plane[I915_MAX_PIPES];
9476 struct intel_display_error_state *
9477 intel_display_capture_error_state(struct drm_device *dev)
9479 drm_i915_private_t *dev_priv = dev->dev_private;
9480 struct intel_display_error_state *error;
9481 enum transcoder cpu_transcoder;
9484 error = kmalloc(sizeof(*error), GFP_ATOMIC);
9489 cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i);
9491 if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) {
9492 error->cursor[i].control = I915_READ(CURCNTR(i));
9493 error->cursor[i].position = I915_READ(CURPOS(i));
9494 error->cursor[i].base = I915_READ(CURBASE(i));
9496 error->cursor[i].control = I915_READ(CURCNTR_IVB(i));
9497 error->cursor[i].position = I915_READ(CURPOS_IVB(i));
9498 error->cursor[i].base = I915_READ(CURBASE_IVB(i));
9501 error->plane[i].control = I915_READ(DSPCNTR(i));
9502 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
9503 if (INTEL_INFO(dev)->gen <= 3) {
9504 error->plane[i].size = I915_READ(DSPSIZE(i));
9505 error->plane[i].pos = I915_READ(DSPPOS(i));
9507 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
9508 error->plane[i].addr = I915_READ(DSPADDR(i));
9509 if (INTEL_INFO(dev)->gen >= 4) {
9510 error->plane[i].surface = I915_READ(DSPSURF(i));
9511 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
9514 error->pipe[i].conf = I915_READ(PIPECONF(cpu_transcoder));
9515 error->pipe[i].source = I915_READ(PIPESRC(i));
9516 error->pipe[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
9517 error->pipe[i].hblank = I915_READ(HBLANK(cpu_transcoder));
9518 error->pipe[i].hsync = I915_READ(HSYNC(cpu_transcoder));
9519 error->pipe[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
9520 error->pipe[i].vblank = I915_READ(VBLANK(cpu_transcoder));
9521 error->pipe[i].vsync = I915_READ(VSYNC(cpu_transcoder));
9528 intel_display_print_error_state(struct seq_file *m,
9529 struct drm_device *dev,
9530 struct intel_display_error_state *error)
9534 seq_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
9536 seq_printf(m, "Pipe [%d]:\n", i);
9537 seq_printf(m, " CONF: %08x\n", error->pipe[i].conf);
9538 seq_printf(m, " SRC: %08x\n", error->pipe[i].source);
9539 seq_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal);
9540 seq_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank);
9541 seq_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync);
9542 seq_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal);
9543 seq_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank);
9544 seq_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync);
9546 seq_printf(m, "Plane [%d]:\n", i);
9547 seq_printf(m, " CNTR: %08x\n", error->plane[i].control);
9548 seq_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
9549 if (INTEL_INFO(dev)->gen <= 3) {
9550 seq_printf(m, " SIZE: %08x\n", error->plane[i].size);
9551 seq_printf(m, " POS: %08x\n", error->plane[i].pos);
9553 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
9554 seq_printf(m, " ADDR: %08x\n", error->plane[i].addr);
9555 if (INTEL_INFO(dev)->gen >= 4) {
9556 seq_printf(m, " SURF: %08x\n", error->plane[i].surface);
9557 seq_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
9560 seq_printf(m, "Cursor [%d]:\n", i);
9561 seq_printf(m, " CNTR: %08x\n", error->cursor[i].control);
9562 seq_printf(m, " POS: %08x\n", error->cursor[i].position);
9563 seq_printf(m, " BASE: %08x\n", error->cursor[i].base);