]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/gpu/drm/i915/intel_guc_loader.c
Merge remote-tracking branch 'block/for-next'
[karo-tx-linux.git] / drivers / gpu / drm / i915 / intel_guc_loader.c
1 /*
2  * Copyright © 2014 Intel Corporation
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  * and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice (including the next
12  * paragraph) shall be included in all copies or substantial portions of the
13  * Software.
14  *
15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
21  * IN THE SOFTWARE.
22  *
23  * Authors:
24  *    Vinit Azad <vinit.azad@intel.com>
25  *    Ben Widawsky <ben@bwidawsk.net>
26  *    Dave Gordon <david.s.gordon@intel.com>
27  *    Alex Dai <yu.dai@intel.com>
28  */
29 #include <linux/firmware.h>
30 #include "i915_drv.h"
31 #include "intel_guc.h"
32
33 /**
34  * DOC: GuC-specific firmware loader
35  *
36  * intel_guc:
37  * Top level structure of guc. It handles firmware loading and manages client
38  * pool and doorbells. intel_guc owns a i915_guc_client to replace the legacy
39  * ExecList submission.
40  *
41  * Firmware versioning:
42  * The firmware build process will generate a version header file with major and
43  * minor version defined. The versions are built into CSS header of firmware.
44  * i915 kernel driver set the minimal firmware version required per platform.
45  * The firmware installation package will install (symbolic link) proper version
46  * of firmware.
47  *
48  * GuC address space:
49  * GuC does not allow any gfx GGTT address that falls into range [0, WOPCM_TOP),
50  * which is reserved for Boot ROM, SRAM and WOPCM. Currently this top address is
51  * 512K. In order to exclude 0-512K address space from GGTT, all gfx objects
52  * used by GuC is pinned with PIN_OFFSET_BIAS along with size of WOPCM.
53  *
54  * Firmware log:
55  * Firmware log is enabled by setting i915.guc_log_level to non-negative level.
56  * Log data is printed out via reading debugfs i915_guc_log_dump. Reading from
57  * i915_guc_load_status will print out firmware loading status and scratch
58  * registers value.
59  *
60  */
61
62 #define I915_SKL_GUC_UCODE "i915/skl_guc_ver4.bin"
63 MODULE_FIRMWARE(I915_SKL_GUC_UCODE);
64
65 /* User-friendly representation of an enum */
66 const char *intel_guc_fw_status_repr(enum intel_guc_fw_status status)
67 {
68         switch (status) {
69         case GUC_FIRMWARE_FAIL:
70                 return "FAIL";
71         case GUC_FIRMWARE_NONE:
72                 return "NONE";
73         case GUC_FIRMWARE_PENDING:
74                 return "PENDING";
75         case GUC_FIRMWARE_SUCCESS:
76                 return "SUCCESS";
77         default:
78                 return "UNKNOWN!";
79         }
80 };
81
82 static void direct_interrupts_to_host(struct drm_i915_private *dev_priv)
83 {
84         struct intel_engine_cs *ring;
85         int i, irqs;
86
87         /* tell all command streamers NOT to forward interrupts and vblank to GuC */
88         irqs = _MASKED_FIELD(GFX_FORWARD_VBLANK_MASK, GFX_FORWARD_VBLANK_NEVER);
89         irqs |= _MASKED_BIT_DISABLE(GFX_INTERRUPT_STEERING);
90         for_each_ring(ring, dev_priv, i)
91                 I915_WRITE(RING_MODE_GEN7(ring), irqs);
92
93         /* route all GT interrupts to the host */
94         I915_WRITE(GUC_BCS_RCS_IER, 0);
95         I915_WRITE(GUC_VCS2_VCS1_IER, 0);
96         I915_WRITE(GUC_WD_VECS_IER, 0);
97 }
98
99 static void direct_interrupts_to_guc(struct drm_i915_private *dev_priv)
100 {
101         struct intel_engine_cs *ring;
102         int i, irqs;
103
104         /* tell all command streamers to forward interrupts and vblank to GuC */
105         irqs = _MASKED_FIELD(GFX_FORWARD_VBLANK_MASK, GFX_FORWARD_VBLANK_ALWAYS);
106         irqs |= _MASKED_BIT_ENABLE(GFX_INTERRUPT_STEERING);
107         for_each_ring(ring, dev_priv, i)
108                 I915_WRITE(RING_MODE_GEN7(ring), irqs);
109
110         /* route USER_INTERRUPT to Host, all others are sent to GuC. */
111         irqs = GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT |
112                GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT;
113         /* These three registers have the same bit definitions */
114         I915_WRITE(GUC_BCS_RCS_IER, ~irqs);
115         I915_WRITE(GUC_VCS2_VCS1_IER, ~irqs);
116         I915_WRITE(GUC_WD_VECS_IER, ~irqs);
117 }
118
119 static u32 get_gttype(struct drm_i915_private *dev_priv)
120 {
121         /* XXX: GT type based on PCI device ID? field seems unused by fw */
122         return 0;
123 }
124
125 static u32 get_core_family(struct drm_i915_private *dev_priv)
126 {
127         switch (INTEL_INFO(dev_priv)->gen) {
128         case 9:
129                 return GFXCORE_FAMILY_GEN9;
130
131         default:
132                 DRM_ERROR("GUC: unsupported core family\n");
133                 return GFXCORE_FAMILY_UNKNOWN;
134         }
135 }
136
137 static void set_guc_init_params(struct drm_i915_private *dev_priv)
138 {
139         struct intel_guc *guc = &dev_priv->guc;
140         u32 params[GUC_CTL_MAX_DWORDS];
141         int i;
142
143         memset(&params, 0, sizeof(params));
144
145         params[GUC_CTL_DEVICE_INFO] |=
146                 (get_gttype(dev_priv) << GUC_CTL_GTTYPE_SHIFT) |
147                 (get_core_family(dev_priv) << GUC_CTL_COREFAMILY_SHIFT);
148
149         /*
150          * GuC ARAT increment is 10 ns. GuC default scheduler quantum is one
151          * second. This ARAR is calculated by:
152          * Scheduler-Quantum-in-ns / ARAT-increment-in-ns = 1000000000 / 10
153          */
154         params[GUC_CTL_ARAT_HIGH] = 0;
155         params[GUC_CTL_ARAT_LOW] = 100000000;
156
157         params[GUC_CTL_WA] |= GUC_CTL_WA_UK_BY_DRIVER;
158
159         params[GUC_CTL_FEATURE] |= GUC_CTL_DISABLE_SCHEDULER |
160                         GUC_CTL_VCS2_ENABLED;
161
162         if (i915.guc_log_level >= 0) {
163                 params[GUC_CTL_LOG_PARAMS] = guc->log_flags;
164                 params[GUC_CTL_DEBUG] =
165                         i915.guc_log_level << GUC_LOG_VERBOSITY_SHIFT;
166         }
167
168         if (guc->ads_obj) {
169                 u32 ads = (u32)i915_gem_obj_ggtt_offset(guc->ads_obj)
170                                 >> PAGE_SHIFT;
171                 params[GUC_CTL_DEBUG] |= ads << GUC_ADS_ADDR_SHIFT;
172                 params[GUC_CTL_DEBUG] |= GUC_ADS_ENABLED;
173         }
174
175         /* If GuC submission is enabled, set up additional parameters here */
176         if (i915.enable_guc_submission) {
177                 u32 pgs = i915_gem_obj_ggtt_offset(dev_priv->guc.ctx_pool_obj);
178                 u32 ctx_in_16 = GUC_MAX_GPU_CONTEXTS / 16;
179
180                 pgs >>= PAGE_SHIFT;
181                 params[GUC_CTL_CTXINFO] = (pgs << GUC_CTL_BASE_ADDR_SHIFT) |
182                         (ctx_in_16 << GUC_CTL_CTXNUM_IN16_SHIFT);
183
184                 params[GUC_CTL_FEATURE] |= GUC_CTL_KERNEL_SUBMISSIONS;
185
186                 /* Unmask this bit to enable the GuC's internal scheduler */
187                 params[GUC_CTL_FEATURE] &= ~GUC_CTL_DISABLE_SCHEDULER;
188         }
189
190         I915_WRITE(SOFT_SCRATCH(0), 0);
191
192         for (i = 0; i < GUC_CTL_MAX_DWORDS; i++)
193                 I915_WRITE(SOFT_SCRATCH(1 + i), params[i]);
194 }
195
196 /*
197  * Read the GuC status register (GUC_STATUS) and store it in the
198  * specified location; then return a boolean indicating whether
199  * the value matches either of two values representing completion
200  * of the GuC boot process.
201  *
202  * This is used for polling the GuC status in a wait_for_atomic()
203  * loop below.
204  */
205 static inline bool guc_ucode_response(struct drm_i915_private *dev_priv,
206                                       u32 *status)
207 {
208         u32 val = I915_READ(GUC_STATUS);
209         u32 uk_val = val & GS_UKERNEL_MASK;
210         *status = val;
211         return (uk_val == GS_UKERNEL_READY ||
212                 ((val & GS_MIA_CORE_STATE) && uk_val == GS_UKERNEL_LAPIC_DONE));
213 }
214
215 /*
216  * Transfer the firmware image to RAM for execution by the microcontroller.
217  *
218  * Architecturally, the DMA engine is bidirectional, and can potentially even
219  * transfer between GTT locations. This functionality is left out of the API
220  * for now as there is no need for it.
221  *
222  * Note that GuC needs the CSS header plus uKernel code to be copied by the
223  * DMA engine in one operation, whereas the RSA signature is loaded via MMIO.
224  */
225 static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv)
226 {
227         struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
228         struct drm_i915_gem_object *fw_obj = guc_fw->guc_fw_obj;
229         unsigned long offset;
230         struct sg_table *sg = fw_obj->pages;
231         u32 status, rsa[UOS_RSA_SCRATCH_MAX_COUNT];
232         int i, ret = 0;
233
234         /* where RSA signature starts */
235         offset = guc_fw->rsa_offset;
236
237         /* Copy RSA signature from the fw image to HW for verification */
238         sg_pcopy_to_buffer(sg->sgl, sg->nents, rsa, sizeof(rsa), offset);
239         for (i = 0; i < UOS_RSA_SCRATCH_MAX_COUNT; i++)
240                 I915_WRITE(UOS_RSA_SCRATCH(i), rsa[i]);
241
242         /* The header plus uCode will be copied to WOPCM via DMA, excluding any
243          * other components */
244         I915_WRITE(DMA_COPY_SIZE, guc_fw->header_size + guc_fw->ucode_size);
245
246         /* Set the source address for the new blob */
247         offset = i915_gem_obj_ggtt_offset(fw_obj) + guc_fw->header_offset;
248         I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
249         I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
250
251         /*
252          * Set the DMA destination. Current uCode expects the code to be
253          * loaded at 8k; locations below this are used for the stack.
254          */
255         I915_WRITE(DMA_ADDR_1_LOW, 0x2000);
256         I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
257
258         /* Finally start the DMA */
259         I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
260
261         /*
262          * Spin-wait for the DMA to complete & the GuC to start up.
263          * NB: Docs recommend not using the interrupt for completion.
264          * Measurements indicate this should take no more than 20ms, so a
265          * timeout here indicates that the GuC has failed and is unusable.
266          * (Higher levels of the driver will attempt to fall back to
267          * execlist mode if this happens.)
268          */
269         ret = wait_for_atomic(guc_ucode_response(dev_priv, &status), 100);
270
271         DRM_DEBUG_DRIVER("DMA status 0x%x, GuC status 0x%x\n",
272                         I915_READ(DMA_CTRL), status);
273
274         if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) {
275                 DRM_ERROR("GuC firmware signature verification failed\n");
276                 ret = -ENOEXEC;
277         }
278
279         DRM_DEBUG_DRIVER("returning %d\n", ret);
280
281         return ret;
282 }
283
284 /*
285  * Load the GuC firmware blob into the MinuteIA.
286  */
287 static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
288 {
289         struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
290         struct drm_device *dev = dev_priv->dev;
291         int ret;
292
293         ret = i915_gem_object_set_to_gtt_domain(guc_fw->guc_fw_obj, false);
294         if (ret) {
295                 DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
296                 return ret;
297         }
298
299         ret = i915_gem_obj_ggtt_pin(guc_fw->guc_fw_obj, 0, 0);
300         if (ret) {
301                 DRM_DEBUG_DRIVER("pin failed %d\n", ret);
302                 return ret;
303         }
304
305         /* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
306         I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
307
308         intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
309
310         /* init WOPCM */
311         I915_WRITE(GUC_WOPCM_SIZE, GUC_WOPCM_SIZE_VALUE);
312         I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);
313
314         /* Enable MIA caching. GuC clock gating is disabled. */
315         I915_WRITE(GUC_SHIM_CONTROL, GUC_SHIM_CONTROL_VALUE);
316
317         /* WaDisableMinuteIaClockGating:skl,bxt */
318         if (IS_SKL_REVID(dev, 0, SKL_REVID_B0) ||
319             IS_BXT_REVID(dev, 0, BXT_REVID_A1)) {
320                 I915_WRITE(GUC_SHIM_CONTROL, (I915_READ(GUC_SHIM_CONTROL) &
321                                               ~GUC_ENABLE_MIA_CLOCK_GATING));
322         }
323
324         /* WaC6DisallowByGfxPause*/
325         I915_WRITE(GEN6_GFXPAUSE, 0x30FFF);
326
327         if (IS_BROXTON(dev))
328                 I915_WRITE(GEN9LP_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
329         else
330                 I915_WRITE(GEN9_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
331
332         if (IS_GEN9(dev)) {
333                 /* DOP Clock Gating Enable for GuC clocks */
334                 I915_WRITE(GEN7_MISCCPCTL, (GEN8_DOP_CLOCK_GATE_GUC_ENABLE |
335                                             I915_READ(GEN7_MISCCPCTL)));
336
337                 /* allows for 5us before GT can go to RC6 */
338                 I915_WRITE(GUC_ARAT_C6DIS, 0x1FF);
339         }
340
341         set_guc_init_params(dev_priv);
342
343         ret = guc_ucode_xfer_dma(dev_priv);
344
345         intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
346
347         /*
348          * We keep the object pages for reuse during resume. But we can unpin it
349          * now that DMA has completed, so it doesn't continue to take up space.
350          */
351         i915_gem_object_ggtt_unpin(guc_fw->guc_fw_obj);
352
353         return ret;
354 }
355
356 /**
357  * intel_guc_ucode_load() - load GuC uCode into the device
358  * @dev:        drm device
359  *
360  * Called from gem_init_hw() during driver loading and also after a GPU reset.
361  *
362  * The firmware image should have already been fetched into memory by the
363  * earlier call to intel_guc_ucode_init(), so here we need only check that
364  * is succeeded, and then transfer the image to the h/w.
365  *
366  * Return:      non-zero code on error
367  */
368 int intel_guc_ucode_load(struct drm_device *dev)
369 {
370         struct drm_i915_private *dev_priv = dev->dev_private;
371         struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
372         int err = 0;
373
374         if (!i915.enable_guc_submission)
375                 return 0;
376
377         DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
378                 intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
379                 intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
380
381         direct_interrupts_to_host(dev_priv);
382
383         if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_NONE)
384                 return 0;
385
386         if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_SUCCESS &&
387             guc_fw->guc_fw_load_status == GUC_FIRMWARE_FAIL)
388                 return -ENOEXEC;
389
390         guc_fw->guc_fw_load_status = GUC_FIRMWARE_PENDING;
391
392         DRM_DEBUG_DRIVER("GuC fw fetch status %s\n",
393                 intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));
394
395         switch (guc_fw->guc_fw_fetch_status) {
396         case GUC_FIRMWARE_FAIL:
397                 /* something went wrong :( */
398                 err = -EIO;
399                 goto fail;
400
401         case GUC_FIRMWARE_NONE:
402         case GUC_FIRMWARE_PENDING:
403         default:
404                 /* "can't happen" */
405                 WARN_ONCE(1, "GuC fw %s invalid guc_fw_fetch_status %s [%d]\n",
406                         guc_fw->guc_fw_path,
407                         intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
408                         guc_fw->guc_fw_fetch_status);
409                 err = -ENXIO;
410                 goto fail;
411
412         case GUC_FIRMWARE_SUCCESS:
413                 break;
414         }
415
416         err = i915_guc_submission_init(dev);
417         if (err)
418                 goto fail;
419
420         err = guc_ucode_xfer(dev_priv);
421         if (err)
422                 goto fail;
423
424         guc_fw->guc_fw_load_status = GUC_FIRMWARE_SUCCESS;
425
426         DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
427                 intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
428                 intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
429
430         if (i915.enable_guc_submission) {
431                 /* The execbuf_client will be recreated. Release it first. */
432                 i915_guc_submission_disable(dev);
433
434                 err = i915_guc_submission_enable(dev);
435                 if (err)
436                         goto fail;
437                 direct_interrupts_to_guc(dev_priv);
438         }
439
440         return 0;
441
442 fail:
443         if (guc_fw->guc_fw_load_status == GUC_FIRMWARE_PENDING)
444                 guc_fw->guc_fw_load_status = GUC_FIRMWARE_FAIL;
445
446         direct_interrupts_to_host(dev_priv);
447         i915_guc_submission_disable(dev);
448         i915_guc_submission_fini(dev);
449
450         return err;
451 }
452
453 static void guc_fw_fetch(struct drm_device *dev, struct intel_guc_fw *guc_fw)
454 {
455         struct drm_i915_gem_object *obj;
456         const struct firmware *fw;
457         struct guc_css_header *css;
458         size_t size;
459         int err;
460
461         DRM_DEBUG_DRIVER("before requesting firmware: GuC fw fetch status %s\n",
462                 intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));
463
464         err = request_firmware(&fw, guc_fw->guc_fw_path, &dev->pdev->dev);
465         if (err)
466                 goto fail;
467         if (!fw)
468                 goto fail;
469
470         DRM_DEBUG_DRIVER("fetch GuC fw from %s succeeded, fw %p\n",
471                 guc_fw->guc_fw_path, fw);
472
473         /* Check the size of the blob before examining buffer contents */
474         if (fw->size < sizeof(struct guc_css_header)) {
475                 DRM_ERROR("Firmware header is missing\n");
476                 goto fail;
477         }
478
479         css = (struct guc_css_header *)fw->data;
480
481         /* Firmware bits always start from header */
482         guc_fw->header_offset = 0;
483         guc_fw->header_size = (css->header_size_dw - css->modulus_size_dw -
484                 css->key_size_dw - css->exponent_size_dw) * sizeof(u32);
485
486         if (guc_fw->header_size != sizeof(struct guc_css_header)) {
487                 DRM_ERROR("CSS header definition mismatch\n");
488                 goto fail;
489         }
490
491         /* then, uCode */
492         guc_fw->ucode_offset = guc_fw->header_offset + guc_fw->header_size;
493         guc_fw->ucode_size = (css->size_dw - css->header_size_dw) * sizeof(u32);
494
495         /* now RSA */
496         if (css->key_size_dw != UOS_RSA_SCRATCH_MAX_COUNT) {
497                 DRM_ERROR("RSA key size is bad\n");
498                 goto fail;
499         }
500         guc_fw->rsa_offset = guc_fw->ucode_offset + guc_fw->ucode_size;
501         guc_fw->rsa_size = css->key_size_dw * sizeof(u32);
502
503         /* At least, it should have header, uCode and RSA. Size of all three. */
504         size = guc_fw->header_size + guc_fw->ucode_size + guc_fw->rsa_size;
505         if (fw->size < size) {
506                 DRM_ERROR("Missing firmware components\n");
507                 goto fail;
508         }
509
510         /* Header and uCode will be loaded to WOPCM. Size of the two. */
511         size = guc_fw->header_size + guc_fw->ucode_size;
512
513         /* Top 32k of WOPCM is reserved (8K stack + 24k RC6 context). */
514         if (size > GUC_WOPCM_SIZE_VALUE - 0x8000) {
515                 DRM_ERROR("Firmware is too large to fit in WOPCM\n");
516                 goto fail;
517         }
518
519         /*
520          * The GuC firmware image has the version number embedded at a well-known
521          * offset within the firmware blob; note that major / minor version are
522          * TWO bytes each (i.e. u16), although all pointers and offsets are defined
523          * in terms of bytes (u8).
524          */
525         guc_fw->guc_fw_major_found = css->guc_sw_version >> 16;
526         guc_fw->guc_fw_minor_found = css->guc_sw_version & 0xFFFF;
527
528         if (guc_fw->guc_fw_major_found != guc_fw->guc_fw_major_wanted ||
529             guc_fw->guc_fw_minor_found < guc_fw->guc_fw_minor_wanted) {
530                 DRM_ERROR("GuC firmware version %d.%d, required %d.%d\n",
531                         guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found,
532                         guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);
533                 err = -ENOEXEC;
534                 goto fail;
535         }
536
537         DRM_DEBUG_DRIVER("firmware version %d.%d OK (minimum %d.%d)\n",
538                         guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found,
539                         guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);
540
541         mutex_lock(&dev->struct_mutex);
542         obj = i915_gem_object_create_from_data(dev, fw->data, fw->size);
543         mutex_unlock(&dev->struct_mutex);
544         if (IS_ERR_OR_NULL(obj)) {
545                 err = obj ? PTR_ERR(obj) : -ENOMEM;
546                 goto fail;
547         }
548
549         guc_fw->guc_fw_obj = obj;
550         guc_fw->guc_fw_size = fw->size;
551
552         DRM_DEBUG_DRIVER("GuC fw fetch status SUCCESS, obj %p\n",
553                         guc_fw->guc_fw_obj);
554
555         release_firmware(fw);
556         guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_SUCCESS;
557         return;
558
559 fail:
560         DRM_DEBUG_DRIVER("GuC fw fetch status FAIL; err %d, fw %p, obj %p\n",
561                 err, fw, guc_fw->guc_fw_obj);
562         DRM_ERROR("Failed to fetch GuC firmware from %s (error %d)\n",
563                   guc_fw->guc_fw_path, err);
564
565         mutex_lock(&dev->struct_mutex);
566         obj = guc_fw->guc_fw_obj;
567         if (obj)
568                 drm_gem_object_unreference(&obj->base);
569         guc_fw->guc_fw_obj = NULL;
570         mutex_unlock(&dev->struct_mutex);
571
572         release_firmware(fw);           /* OK even if fw is NULL */
573         guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL;
574 }
575
576 /**
577  * intel_guc_ucode_init() - define parameters and fetch firmware
578  * @dev:        drm device
579  *
580  * Called early during driver load, but after GEM is initialised.
581  *
582  * The firmware will be transferred to the GuC's memory later,
583  * when intel_guc_ucode_load() is called.
584  */
585 void intel_guc_ucode_init(struct drm_device *dev)
586 {
587         struct drm_i915_private *dev_priv = dev->dev_private;
588         struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
589         const char *fw_path;
590
591         if (!HAS_GUC_SCHED(dev))
592                 i915.enable_guc_submission = false;
593
594         if (!HAS_GUC_UCODE(dev)) {
595                 fw_path = NULL;
596         } else if (IS_SKYLAKE(dev)) {
597                 fw_path = I915_SKL_GUC_UCODE;
598                 guc_fw->guc_fw_major_wanted = 4;
599                 guc_fw->guc_fw_minor_wanted = 3;
600         } else {
601                 i915.enable_guc_submission = false;
602                 fw_path = "";   /* unknown device */
603         }
604
605         if (!i915.enable_guc_submission)
606                 return;
607
608         guc_fw->guc_dev = dev;
609         guc_fw->guc_fw_path = fw_path;
610         guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
611         guc_fw->guc_fw_load_status = GUC_FIRMWARE_NONE;
612
613         if (fw_path == NULL)
614                 return;
615
616         if (*fw_path == '\0') {
617                 DRM_ERROR("No GuC firmware known for this platform\n");
618                 guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL;
619                 return;
620         }
621
622         guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_PENDING;
623         DRM_DEBUG_DRIVER("GuC firmware pending, path %s\n", fw_path);
624         guc_fw_fetch(dev, guc_fw);
625         /* status must now be FAIL or SUCCESS */
626 }
627
628 /**
629  * intel_guc_ucode_fini() - clean up all allocated resources
630  * @dev:        drm device
631  */
632 void intel_guc_ucode_fini(struct drm_device *dev)
633 {
634         struct drm_i915_private *dev_priv = dev->dev_private;
635         struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
636
637         mutex_lock(&dev->struct_mutex);
638         direct_interrupts_to_host(dev_priv);
639         i915_guc_submission_disable(dev);
640         i915_guc_submission_fini(dev);
641
642         if (guc_fw->guc_fw_obj)
643                 drm_gem_object_unreference(&guc_fw->guc_fw_obj->base);
644         guc_fw->guc_fw_obj = NULL;
645         mutex_unlock(&dev->struct_mutex);
646
647         guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
648 }