2 * Copyright © 2014 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
24 * Vinit Azad <vinit.azad@intel.com>
25 * Ben Widawsky <ben@bwidawsk.net>
26 * Dave Gordon <david.s.gordon@intel.com>
27 * Alex Dai <yu.dai@intel.com>
29 #include <linux/firmware.h>
31 #include "intel_guc.h"
34 * DOC: GuC-specific firmware loader
37 * Top level structure of guc. It handles firmware loading and manages client
38 * pool and doorbells. intel_guc owns a i915_guc_client to replace the legacy
39 * ExecList submission.
41 * Firmware versioning:
42 * The firmware build process will generate a version header file with major and
43 * minor version defined. The versions are built into CSS header of firmware.
44 * i915 kernel driver set the minimal firmware version required per platform.
45 * The firmware installation package will install (symbolic link) proper version
49 * GuC does not allow any gfx GGTT address that falls into range [0, WOPCM_TOP),
50 * which is reserved for Boot ROM, SRAM and WOPCM. Currently this top address is
51 * 512K. In order to exclude 0-512K address space from GGTT, all gfx objects
52 * used by GuC is pinned with PIN_OFFSET_BIAS along with size of WOPCM.
55 * Firmware log is enabled by setting i915.guc_log_level to non-negative level.
56 * Log data is printed out via reading debugfs i915_guc_log_dump. Reading from
57 * i915_guc_load_status will print out firmware loading status and scratch
62 #define I915_SKL_GUC_UCODE "i915/skl_guc_ver4.bin"
63 MODULE_FIRMWARE(I915_SKL_GUC_UCODE);
65 /* User-friendly representation of an enum */
66 const char *intel_guc_fw_status_repr(enum intel_guc_fw_status status)
69 case GUC_FIRMWARE_FAIL:
71 case GUC_FIRMWARE_NONE:
73 case GUC_FIRMWARE_PENDING:
75 case GUC_FIRMWARE_SUCCESS:
82 static void direct_interrupts_to_host(struct drm_i915_private *dev_priv)
84 struct intel_engine_cs *ring;
87 /* tell all command streamers NOT to forward interrupts and vblank to GuC */
88 irqs = _MASKED_FIELD(GFX_FORWARD_VBLANK_MASK, GFX_FORWARD_VBLANK_NEVER);
89 irqs |= _MASKED_BIT_DISABLE(GFX_INTERRUPT_STEERING);
90 for_each_ring(ring, dev_priv, i)
91 I915_WRITE(RING_MODE_GEN7(ring), irqs);
93 /* route all GT interrupts to the host */
94 I915_WRITE(GUC_BCS_RCS_IER, 0);
95 I915_WRITE(GUC_VCS2_VCS1_IER, 0);
96 I915_WRITE(GUC_WD_VECS_IER, 0);
99 static void direct_interrupts_to_guc(struct drm_i915_private *dev_priv)
101 struct intel_engine_cs *ring;
104 /* tell all command streamers to forward interrupts and vblank to GuC */
105 irqs = _MASKED_FIELD(GFX_FORWARD_VBLANK_MASK, GFX_FORWARD_VBLANK_ALWAYS);
106 irqs |= _MASKED_BIT_ENABLE(GFX_INTERRUPT_STEERING);
107 for_each_ring(ring, dev_priv, i)
108 I915_WRITE(RING_MODE_GEN7(ring), irqs);
110 /* route USER_INTERRUPT to Host, all others are sent to GuC. */
111 irqs = GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT |
112 GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT;
113 /* These three registers have the same bit definitions */
114 I915_WRITE(GUC_BCS_RCS_IER, ~irqs);
115 I915_WRITE(GUC_VCS2_VCS1_IER, ~irqs);
116 I915_WRITE(GUC_WD_VECS_IER, ~irqs);
119 static u32 get_gttype(struct drm_i915_private *dev_priv)
121 /* XXX: GT type based on PCI device ID? field seems unused by fw */
125 static u32 get_core_family(struct drm_i915_private *dev_priv)
127 switch (INTEL_INFO(dev_priv)->gen) {
129 return GFXCORE_FAMILY_GEN9;
132 DRM_ERROR("GUC: unsupported core family\n");
133 return GFXCORE_FAMILY_UNKNOWN;
137 static void set_guc_init_params(struct drm_i915_private *dev_priv)
139 struct intel_guc *guc = &dev_priv->guc;
140 u32 params[GUC_CTL_MAX_DWORDS];
143 memset(¶ms, 0, sizeof(params));
145 params[GUC_CTL_DEVICE_INFO] |=
146 (get_gttype(dev_priv) << GUC_CTL_GTTYPE_SHIFT) |
147 (get_core_family(dev_priv) << GUC_CTL_COREFAMILY_SHIFT);
150 * GuC ARAT increment is 10 ns. GuC default scheduler quantum is one
151 * second. This ARAR is calculated by:
152 * Scheduler-Quantum-in-ns / ARAT-increment-in-ns = 1000000000 / 10
154 params[GUC_CTL_ARAT_HIGH] = 0;
155 params[GUC_CTL_ARAT_LOW] = 100000000;
157 params[GUC_CTL_WA] |= GUC_CTL_WA_UK_BY_DRIVER;
159 params[GUC_CTL_FEATURE] |= GUC_CTL_DISABLE_SCHEDULER |
160 GUC_CTL_VCS2_ENABLED;
162 if (i915.guc_log_level >= 0) {
163 params[GUC_CTL_LOG_PARAMS] = guc->log_flags;
164 params[GUC_CTL_DEBUG] =
165 i915.guc_log_level << GUC_LOG_VERBOSITY_SHIFT;
169 u32 ads = (u32)i915_gem_obj_ggtt_offset(guc->ads_obj)
171 params[GUC_CTL_DEBUG] |= ads << GUC_ADS_ADDR_SHIFT;
172 params[GUC_CTL_DEBUG] |= GUC_ADS_ENABLED;
175 /* If GuC submission is enabled, set up additional parameters here */
176 if (i915.enable_guc_submission) {
177 u32 pgs = i915_gem_obj_ggtt_offset(dev_priv->guc.ctx_pool_obj);
178 u32 ctx_in_16 = GUC_MAX_GPU_CONTEXTS / 16;
181 params[GUC_CTL_CTXINFO] = (pgs << GUC_CTL_BASE_ADDR_SHIFT) |
182 (ctx_in_16 << GUC_CTL_CTXNUM_IN16_SHIFT);
184 params[GUC_CTL_FEATURE] |= GUC_CTL_KERNEL_SUBMISSIONS;
186 /* Unmask this bit to enable the GuC's internal scheduler */
187 params[GUC_CTL_FEATURE] &= ~GUC_CTL_DISABLE_SCHEDULER;
190 I915_WRITE(SOFT_SCRATCH(0), 0);
192 for (i = 0; i < GUC_CTL_MAX_DWORDS; i++)
193 I915_WRITE(SOFT_SCRATCH(1 + i), params[i]);
197 * Read the GuC status register (GUC_STATUS) and store it in the
198 * specified location; then return a boolean indicating whether
199 * the value matches either of two values representing completion
200 * of the GuC boot process.
202 * This is used for polling the GuC status in a wait_for()
205 static inline bool guc_ucode_response(struct drm_i915_private *dev_priv,
208 u32 val = I915_READ(GUC_STATUS);
209 u32 uk_val = val & GS_UKERNEL_MASK;
211 return (uk_val == GS_UKERNEL_READY ||
212 ((val & GS_MIA_CORE_STATE) && uk_val == GS_UKERNEL_LAPIC_DONE));
216 * Transfer the firmware image to RAM for execution by the microcontroller.
218 * Architecturally, the DMA engine is bidirectional, and can potentially even
219 * transfer between GTT locations. This functionality is left out of the API
220 * for now as there is no need for it.
222 * Note that GuC needs the CSS header plus uKernel code to be copied by the
223 * DMA engine in one operation, whereas the RSA signature is loaded via MMIO.
225 static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv)
227 struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
228 struct drm_i915_gem_object *fw_obj = guc_fw->guc_fw_obj;
229 unsigned long offset;
230 struct sg_table *sg = fw_obj->pages;
231 u32 status, rsa[UOS_RSA_SCRATCH_MAX_COUNT];
234 /* where RSA signature starts */
235 offset = guc_fw->rsa_offset;
237 /* Copy RSA signature from the fw image to HW for verification */
238 sg_pcopy_to_buffer(sg->sgl, sg->nents, rsa, sizeof(rsa), offset);
239 for (i = 0; i < UOS_RSA_SCRATCH_MAX_COUNT; i++)
240 I915_WRITE(UOS_RSA_SCRATCH(i), rsa[i]);
242 /* The header plus uCode will be copied to WOPCM via DMA, excluding any
243 * other components */
244 I915_WRITE(DMA_COPY_SIZE, guc_fw->header_size + guc_fw->ucode_size);
246 /* Set the source address for the new blob */
247 offset = i915_gem_obj_ggtt_offset(fw_obj) + guc_fw->header_offset;
248 I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
249 I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
252 * Set the DMA destination. Current uCode expects the code to be
253 * loaded at 8k; locations below this are used for the stack.
255 I915_WRITE(DMA_ADDR_1_LOW, 0x2000);
256 I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
258 /* Finally start the DMA */
259 I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
262 * Wait for the DMA to complete & the GuC to start up.
263 * NB: Docs recommend not using the interrupt for completion.
264 * Measurements indicate this should take no more than 20ms, so a
265 * timeout here indicates that the GuC has failed and is unusable.
266 * (Higher levels of the driver will attempt to fall back to
267 * execlist mode if this happens.)
269 ret = wait_for(guc_ucode_response(dev_priv, &status), 100);
271 DRM_DEBUG_DRIVER("DMA status 0x%x, GuC status 0x%x\n",
272 I915_READ(DMA_CTRL), status);
274 if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) {
275 DRM_ERROR("GuC firmware signature verification failed\n");
279 DRM_DEBUG_DRIVER("returning %d\n", ret);
285 * Load the GuC firmware blob into the MinuteIA.
287 static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
289 struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
290 struct drm_device *dev = dev_priv->dev;
293 ret = i915_gem_object_set_to_gtt_domain(guc_fw->guc_fw_obj, false);
295 DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
299 ret = i915_gem_obj_ggtt_pin(guc_fw->guc_fw_obj, 0, 0);
301 DRM_DEBUG_DRIVER("pin failed %d\n", ret);
305 /* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
306 I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
308 intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
311 I915_WRITE(GUC_WOPCM_SIZE, GUC_WOPCM_SIZE_VALUE);
312 I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);
314 /* Enable MIA caching. GuC clock gating is disabled. */
315 I915_WRITE(GUC_SHIM_CONTROL, GUC_SHIM_CONTROL_VALUE);
317 /* WaDisableMinuteIaClockGating:skl,bxt */
318 if (IS_SKL_REVID(dev, 0, SKL_REVID_B0) ||
319 IS_BXT_REVID(dev, 0, BXT_REVID_A1)) {
320 I915_WRITE(GUC_SHIM_CONTROL, (I915_READ(GUC_SHIM_CONTROL) &
321 ~GUC_ENABLE_MIA_CLOCK_GATING));
324 /* WaC6DisallowByGfxPause*/
325 I915_WRITE(GEN6_GFXPAUSE, 0x30FFF);
328 I915_WRITE(GEN9LP_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
330 I915_WRITE(GEN9_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
333 /* DOP Clock Gating Enable for GuC clocks */
334 I915_WRITE(GEN7_MISCCPCTL, (GEN8_DOP_CLOCK_GATE_GUC_ENABLE |
335 I915_READ(GEN7_MISCCPCTL)));
337 /* allows for 5us before GT can go to RC6 */
338 I915_WRITE(GUC_ARAT_C6DIS, 0x1FF);
341 set_guc_init_params(dev_priv);
343 ret = guc_ucode_xfer_dma(dev_priv);
345 intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
348 * We keep the object pages for reuse during resume. But we can unpin it
349 * now that DMA has completed, so it doesn't continue to take up space.
351 i915_gem_object_ggtt_unpin(guc_fw->guc_fw_obj);
357 * intel_guc_ucode_load() - load GuC uCode into the device
360 * Called from gem_init_hw() during driver loading and also after a GPU reset.
362 * The firmware image should have already been fetched into memory by the
363 * earlier call to intel_guc_ucode_init(), so here we need only check that
364 * is succeeded, and then transfer the image to the h/w.
366 * Return: non-zero code on error
368 int intel_guc_ucode_load(struct drm_device *dev)
370 struct drm_i915_private *dev_priv = dev->dev_private;
371 struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
374 if (!i915.enable_guc_submission)
377 DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
378 intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
379 intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
381 direct_interrupts_to_host(dev_priv);
383 if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_NONE)
386 if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_SUCCESS &&
387 guc_fw->guc_fw_load_status == GUC_FIRMWARE_FAIL)
390 guc_fw->guc_fw_load_status = GUC_FIRMWARE_PENDING;
392 DRM_DEBUG_DRIVER("GuC fw fetch status %s\n",
393 intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));
395 switch (guc_fw->guc_fw_fetch_status) {
396 case GUC_FIRMWARE_FAIL:
397 /* something went wrong :( */
401 case GUC_FIRMWARE_NONE:
402 case GUC_FIRMWARE_PENDING:
405 WARN_ONCE(1, "GuC fw %s invalid guc_fw_fetch_status %s [%d]\n",
407 intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
408 guc_fw->guc_fw_fetch_status);
412 case GUC_FIRMWARE_SUCCESS:
416 err = i915_guc_submission_init(dev);
420 err = guc_ucode_xfer(dev_priv);
424 guc_fw->guc_fw_load_status = GUC_FIRMWARE_SUCCESS;
426 DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
427 intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
428 intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
430 if (i915.enable_guc_submission) {
431 /* The execbuf_client will be recreated. Release it first. */
432 i915_guc_submission_disable(dev);
434 err = i915_guc_submission_enable(dev);
437 direct_interrupts_to_guc(dev_priv);
443 if (guc_fw->guc_fw_load_status == GUC_FIRMWARE_PENDING)
444 guc_fw->guc_fw_load_status = GUC_FIRMWARE_FAIL;
446 direct_interrupts_to_host(dev_priv);
447 i915_guc_submission_disable(dev);
448 i915_guc_submission_fini(dev);
453 static void guc_fw_fetch(struct drm_device *dev, struct intel_guc_fw *guc_fw)
455 struct drm_i915_gem_object *obj;
456 const struct firmware *fw;
457 struct guc_css_header *css;
461 DRM_DEBUG_DRIVER("before requesting firmware: GuC fw fetch status %s\n",
462 intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));
464 err = request_firmware(&fw, guc_fw->guc_fw_path, &dev->pdev->dev);
470 DRM_DEBUG_DRIVER("fetch GuC fw from %s succeeded, fw %p\n",
471 guc_fw->guc_fw_path, fw);
473 /* Check the size of the blob before examining buffer contents */
474 if (fw->size < sizeof(struct guc_css_header)) {
475 DRM_ERROR("Firmware header is missing\n");
479 css = (struct guc_css_header *)fw->data;
481 /* Firmware bits always start from header */
482 guc_fw->header_offset = 0;
483 guc_fw->header_size = (css->header_size_dw - css->modulus_size_dw -
484 css->key_size_dw - css->exponent_size_dw) * sizeof(u32);
486 if (guc_fw->header_size != sizeof(struct guc_css_header)) {
487 DRM_ERROR("CSS header definition mismatch\n");
492 guc_fw->ucode_offset = guc_fw->header_offset + guc_fw->header_size;
493 guc_fw->ucode_size = (css->size_dw - css->header_size_dw) * sizeof(u32);
496 if (css->key_size_dw != UOS_RSA_SCRATCH_MAX_COUNT) {
497 DRM_ERROR("RSA key size is bad\n");
500 guc_fw->rsa_offset = guc_fw->ucode_offset + guc_fw->ucode_size;
501 guc_fw->rsa_size = css->key_size_dw * sizeof(u32);
503 /* At least, it should have header, uCode and RSA. Size of all three. */
504 size = guc_fw->header_size + guc_fw->ucode_size + guc_fw->rsa_size;
505 if (fw->size < size) {
506 DRM_ERROR("Missing firmware components\n");
510 /* Header and uCode will be loaded to WOPCM. Size of the two. */
511 size = guc_fw->header_size + guc_fw->ucode_size;
513 /* Top 32k of WOPCM is reserved (8K stack + 24k RC6 context). */
514 if (size > GUC_WOPCM_SIZE_VALUE - 0x8000) {
515 DRM_ERROR("Firmware is too large to fit in WOPCM\n");
520 * The GuC firmware image has the version number embedded at a well-known
521 * offset within the firmware blob; note that major / minor version are
522 * TWO bytes each (i.e. u16), although all pointers and offsets are defined
523 * in terms of bytes (u8).
525 guc_fw->guc_fw_major_found = css->guc_sw_version >> 16;
526 guc_fw->guc_fw_minor_found = css->guc_sw_version & 0xFFFF;
528 if (guc_fw->guc_fw_major_found != guc_fw->guc_fw_major_wanted ||
529 guc_fw->guc_fw_minor_found < guc_fw->guc_fw_minor_wanted) {
530 DRM_ERROR("GuC firmware version %d.%d, required %d.%d\n",
531 guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found,
532 guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);
537 DRM_DEBUG_DRIVER("firmware version %d.%d OK (minimum %d.%d)\n",
538 guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found,
539 guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);
541 mutex_lock(&dev->struct_mutex);
542 obj = i915_gem_object_create_from_data(dev, fw->data, fw->size);
543 mutex_unlock(&dev->struct_mutex);
544 if (IS_ERR_OR_NULL(obj)) {
545 err = obj ? PTR_ERR(obj) : -ENOMEM;
549 guc_fw->guc_fw_obj = obj;
550 guc_fw->guc_fw_size = fw->size;
552 DRM_DEBUG_DRIVER("GuC fw fetch status SUCCESS, obj %p\n",
555 release_firmware(fw);
556 guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_SUCCESS;
560 DRM_DEBUG_DRIVER("GuC fw fetch status FAIL; err %d, fw %p, obj %p\n",
561 err, fw, guc_fw->guc_fw_obj);
562 DRM_ERROR("Failed to fetch GuC firmware from %s (error %d)\n",
563 guc_fw->guc_fw_path, err);
565 mutex_lock(&dev->struct_mutex);
566 obj = guc_fw->guc_fw_obj;
568 drm_gem_object_unreference(&obj->base);
569 guc_fw->guc_fw_obj = NULL;
570 mutex_unlock(&dev->struct_mutex);
572 release_firmware(fw); /* OK even if fw is NULL */
573 guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL;
577 * intel_guc_ucode_init() - define parameters and fetch firmware
580 * Called early during driver load, but after GEM is initialised.
582 * The firmware will be transferred to the GuC's memory later,
583 * when intel_guc_ucode_load() is called.
585 void intel_guc_ucode_init(struct drm_device *dev)
587 struct drm_i915_private *dev_priv = dev->dev_private;
588 struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
591 if (!HAS_GUC_SCHED(dev))
592 i915.enable_guc_submission = false;
594 if (!HAS_GUC_UCODE(dev)) {
596 } else if (IS_SKYLAKE(dev)) {
597 fw_path = I915_SKL_GUC_UCODE;
598 guc_fw->guc_fw_major_wanted = 4;
599 guc_fw->guc_fw_minor_wanted = 3;
601 i915.enable_guc_submission = false;
602 fw_path = ""; /* unknown device */
605 if (!i915.enable_guc_submission)
608 guc_fw->guc_dev = dev;
609 guc_fw->guc_fw_path = fw_path;
610 guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
611 guc_fw->guc_fw_load_status = GUC_FIRMWARE_NONE;
616 if (*fw_path == '\0') {
617 DRM_ERROR("No GuC firmware known for this platform\n");
618 guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL;
622 guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_PENDING;
623 DRM_DEBUG_DRIVER("GuC firmware pending, path %s\n", fw_path);
624 guc_fw_fetch(dev, guc_fw);
625 /* status must now be FAIL or SUCCESS */
629 * intel_guc_ucode_fini() - clean up all allocated resources
632 void intel_guc_ucode_fini(struct drm_device *dev)
634 struct drm_i915_private *dev_priv = dev->dev_private;
635 struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
637 mutex_lock(&dev->struct_mutex);
638 direct_interrupts_to_host(dev_priv);
639 i915_guc_submission_disable(dev);
640 i915_guc_submission_fini(dev);
642 if (guc_fw->guc_fw_obj)
643 drm_gem_object_unreference(&guc_fw->guc_fw_obj->base);
644 guc_fw->guc_fw_obj = NULL;
645 mutex_unlock(&dev->struct_mutex);
647 guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;