2 * Copyright 2005-2006 Erik Waling
3 * Copyright 2006 Stephane Marchesin
4 * Copyright 2007-2009 Stuart Bennett
6 * Permission is hereby granted, free of charge, to any person obtaining a
7 * copy of this software and associated documentation files (the "Software"),
8 * to deal in the Software without restriction, including without limitation
9 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
10 * and/or sell copies of the Software, and to permit persons to whom the
11 * Software is furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
20 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
21 * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
26 #define NV_DEBUG_NOTRACE
27 #include "nouveau_drv.h"
28 #include "nouveau_hw.h"
29 #include "nouveau_encoder.h"
31 #include <linux/io-mapping.h>
33 /* these defines are made up */
34 #define NV_CIO_CRE_44_HEADA 0x0
35 #define NV_CIO_CRE_44_HEADB 0x3
36 #define FEATURE_MOBILE 0x10 /* also FEATURE_QUADRO for BMP */
37 #define LEGACY_I2C_CRT 0x80
38 #define LEGACY_I2C_PANEL 0x81
39 #define LEGACY_I2C_TV 0x82
43 #define BIOSLOG(sip, fmt, arg...) NV_DEBUG(sip->dev, fmt, ##arg)
44 #define LOG_OLD_VALUE(x)
46 #define ROM16(x) le16_to_cpu(*(uint16_t *)&(x))
47 #define ROM32(x) le32_to_cpu(*(uint32_t *)&(x))
54 static bool nv_cksum(const uint8_t *data, unsigned int length)
57 * There's a few checksums in the BIOS, so here's a generic checking
63 for (i = 0; i < length; i++)
73 score_vbios(struct drm_device *dev, const uint8_t *data, const bool writeable)
75 if (!(data[0] == 0x55 && data[1] == 0xAA)) {
76 NV_TRACEWARN(dev, "... BIOS signature not found\n");
80 if (nv_cksum(data, data[2] * 512)) {
81 NV_TRACEWARN(dev, "... BIOS checksum invalid\n");
82 /* if a ro image is somewhat bad, it's probably all rubbish */
83 return writeable ? 2 : 1;
85 NV_TRACE(dev, "... appears to be valid\n");
90 static void load_vbios_prom(struct drm_device *dev, uint8_t *data)
92 struct drm_nouveau_private *dev_priv = dev->dev_private;
93 uint32_t pci_nv_20, save_pci_nv_20;
97 if (dev_priv->card_type >= NV_50)
100 pci_nv_20 = NV_PBUS_PCI_NV_20;
102 /* enable ROM access */
103 save_pci_nv_20 = nvReadMC(dev, pci_nv_20);
104 nvWriteMC(dev, pci_nv_20,
105 save_pci_nv_20 & ~NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED);
107 /* bail if no rom signature */
108 if (nv_rd08(dev, NV_PROM_OFFSET) != 0x55 ||
109 nv_rd08(dev, NV_PROM_OFFSET + 1) != 0xaa)
112 /* additional check (see note below) - read PCI record header */
113 pcir_ptr = nv_rd08(dev, NV_PROM_OFFSET + 0x18) |
114 nv_rd08(dev, NV_PROM_OFFSET + 0x19) << 8;
115 if (nv_rd08(dev, NV_PROM_OFFSET + pcir_ptr) != 'P' ||
116 nv_rd08(dev, NV_PROM_OFFSET + pcir_ptr + 1) != 'C' ||
117 nv_rd08(dev, NV_PROM_OFFSET + pcir_ptr + 2) != 'I' ||
118 nv_rd08(dev, NV_PROM_OFFSET + pcir_ptr + 3) != 'R')
121 /* on some 6600GT/6800LE prom reads are messed up. nvclock alleges a
122 * a good read may be obtained by waiting or re-reading (cargocult: 5x)
123 * each byte. we'll hope pramin has something usable instead
125 for (i = 0; i < NV_PROM_SIZE; i++)
126 data[i] = nv_rd08(dev, NV_PROM_OFFSET + i);
129 /* disable ROM access */
130 nvWriteMC(dev, pci_nv_20,
131 save_pci_nv_20 | NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED);
134 static void load_vbios_pramin(struct drm_device *dev, uint8_t *data)
136 struct drm_nouveau_private *dev_priv = dev->dev_private;
137 uint32_t old_bar0_pramin = 0;
140 if (dev_priv->card_type >= NV_50) {
141 uint32_t vbios_vram = (nv_rd32(dev, 0x619f04) & ~0xff) << 8;
144 vbios_vram = (nv_rd32(dev, 0x1700) << 16) + 0xf0000;
146 old_bar0_pramin = nv_rd32(dev, 0x1700);
147 nv_wr32(dev, 0x1700, vbios_vram >> 16);
150 /* bail if no rom signature */
151 if (nv_rd08(dev, NV_PRAMIN_OFFSET) != 0x55 ||
152 nv_rd08(dev, NV_PRAMIN_OFFSET + 1) != 0xaa)
155 for (i = 0; i < NV_PROM_SIZE; i++)
156 data[i] = nv_rd08(dev, NV_PRAMIN_OFFSET + i);
159 if (dev_priv->card_type >= NV_50)
160 nv_wr32(dev, 0x1700, old_bar0_pramin);
163 static void load_vbios_pci(struct drm_device *dev, uint8_t *data)
165 void __iomem *rom = NULL;
169 ret = pci_enable_rom(dev->pdev);
173 rom = pci_map_rom(dev->pdev, &rom_len);
176 memcpy_fromio(data, rom, rom_len);
177 pci_unmap_rom(dev->pdev, rom);
180 pci_disable_rom(dev->pdev);
183 static void load_vbios_acpi(struct drm_device *dev, uint8_t *data)
187 int size = 64 * 1024;
189 if (!nouveau_acpi_rom_supported(dev->pdev))
192 for (i = 0; i < (size / ROM_BIOS_PAGE); i++) {
193 ret = nouveau_acpi_get_bios_chunk(data,
204 void (*loadbios)(struct drm_device *, uint8_t *);
208 static struct methods shadow_methods[] = {
209 { "PRAMIN", load_vbios_pramin, true },
210 { "PROM", load_vbios_prom, false },
211 { "PCIROM", load_vbios_pci, true },
212 { "ACPI", load_vbios_acpi, true },
214 #define NUM_SHADOW_METHODS ARRAY_SIZE(shadow_methods)
216 static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
218 struct methods *methods = shadow_methods;
220 int scores[NUM_SHADOW_METHODS], i;
223 for (i = 0; i < NUM_SHADOW_METHODS; i++)
224 if (!strcasecmp(nouveau_vbios, methods[i].desc))
227 if (i < NUM_SHADOW_METHODS) {
228 NV_INFO(dev, "Attempting to use BIOS image from %s\n",
231 methods[i].loadbios(dev, data);
232 if (score_vbios(dev, data, methods[i].rw))
236 NV_ERROR(dev, "VBIOS source \'%s\' invalid\n", nouveau_vbios);
239 for (i = 0; i < NUM_SHADOW_METHODS; i++) {
240 NV_TRACE(dev, "Attempting to load BIOS image from %s\n",
242 data[0] = data[1] = 0; /* avoid reuse of previous image */
243 methods[i].loadbios(dev, data);
244 scores[i] = score_vbios(dev, data, methods[i].rw);
245 if (scores[i] == testscore)
249 while (--testscore > 0) {
250 for (i = 0; i < NUM_SHADOW_METHODS; i++) {
251 if (scores[i] == testscore) {
252 NV_TRACE(dev, "Using BIOS image from %s\n",
254 methods[i].loadbios(dev, data);
260 NV_ERROR(dev, "No valid BIOS image found\n");
264 struct init_tbl_entry {
268 * > 0: success, length of opcode
269 * 0: success, but abort further parsing of table (INIT_DONE etc)
270 * < 0: failure, table parsing will be aborted
272 int (*handler)(struct nvbios *, uint16_t, struct init_exec *);
281 static int parse_init_table(struct nvbios *, unsigned int, struct init_exec *);
283 #define MACRO_INDEX_SIZE 2
285 #define CONDITION_SIZE 12
286 #define IO_FLAG_CONDITION_SIZE 9
287 #define IO_CONDITION_SIZE 5
288 #define MEM_INIT_SIZE 66
290 static void still_alive(void)
299 munge_reg(struct nvbios *bios, uint32_t reg)
301 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
302 struct dcb_entry *dcbent = bios->display.output;
304 if (dev_priv->card_type < NV_50)
307 if (reg & 0x40000000) {
310 reg += (ffs(dcbent->or) - 1) * 0x800;
311 if ((reg & 0x20000000) && !(dcbent->sorconf.link & 1))
320 valid_reg(struct nvbios *bios, uint32_t reg)
322 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
323 struct drm_device *dev = bios->dev;
325 /* C51 has misaligned regs on purpose. Marvellous */
327 (reg & 0x1 && dev_priv->vbios.chip_version != 0x51))
328 NV_ERROR(dev, "======= misaligned reg 0x%08X =======\n", reg);
330 /* warn on C51 regs that haven't been verified accessible in tracing */
331 if (reg & 0x1 && dev_priv->vbios.chip_version == 0x51 &&
332 reg != 0x130d && reg != 0x1311 && reg != 0x60081d)
333 NV_WARN(dev, "=== C51 misaligned reg 0x%08X not verified ===\n",
336 if (reg >= (8*1024*1024)) {
337 NV_ERROR(dev, "=== reg 0x%08x out of mapped bounds ===\n", reg);
345 valid_idx_port(struct nvbios *bios, uint16_t port)
347 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
348 struct drm_device *dev = bios->dev;
351 * If adding more ports here, the read/write functions below will need
352 * updating so that the correct mmio range (PRMCIO, PRMDIO, PRMVIO) is
353 * used for the port in question
355 if (dev_priv->card_type < NV_50) {
356 if (port == NV_CIO_CRX__COLOR)
358 if (port == NV_VIO_SRX)
361 if (port == NV_CIO_CRX__COLOR)
365 NV_ERROR(dev, "========== unknown indexed io port 0x%04X ==========\n",
372 valid_port(struct nvbios *bios, uint16_t port)
374 struct drm_device *dev = bios->dev;
377 * If adding more ports here, the read/write functions below will need
378 * updating so that the correct mmio range (PRMCIO, PRMDIO, PRMVIO) is
379 * used for the port in question
381 if (port == NV_VIO_VSE2)
384 NV_ERROR(dev, "========== unknown io port 0x%04X ==========\n", port);
390 bios_rd32(struct nvbios *bios, uint32_t reg)
394 reg = munge_reg(bios, reg);
395 if (!valid_reg(bios, reg))
399 * C51 sometimes uses regs with bit0 set in the address. For these
400 * cases there should exist a translation in a BIOS table to an IO
401 * port address which the BIOS uses for accessing the reg
403 * These only seem to appear for the power control regs to a flat panel,
404 * and the GPIO regs at 0x60081*. In C51 mmio traces the normal regs
405 * for 0x1308 and 0x1310 are used - hence the mask below. An S3
406 * suspend-resume mmio trace from a C51 will be required to see if this
407 * is true for the power microcode in 0x14.., or whether the direct IO
408 * port access method is needed
413 data = nv_rd32(bios->dev, reg);
415 BIOSLOG(bios, " Read: Reg: 0x%08X, Data: 0x%08X\n", reg, data);
421 bios_wr32(struct nvbios *bios, uint32_t reg, uint32_t data)
423 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
425 reg = munge_reg(bios, reg);
426 if (!valid_reg(bios, reg))
429 /* see note in bios_rd32 */
433 LOG_OLD_VALUE(bios_rd32(bios, reg));
434 BIOSLOG(bios, " Write: Reg: 0x%08X, Data: 0x%08X\n", reg, data);
436 if (dev_priv->vbios.execute) {
438 nv_wr32(bios->dev, reg, data);
443 bios_idxprt_rd(struct nvbios *bios, uint16_t port, uint8_t index)
445 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
446 struct drm_device *dev = bios->dev;
449 if (!valid_idx_port(bios, port))
452 if (dev_priv->card_type < NV_50) {
453 if (port == NV_VIO_SRX)
454 data = NVReadVgaSeq(dev, bios->state.crtchead, index);
455 else /* assume NV_CIO_CRX__COLOR */
456 data = NVReadVgaCrtc(dev, bios->state.crtchead, index);
460 data32 = bios_rd32(bios, NV50_PDISPLAY_VGACRTC(index & ~3));
461 data = (data32 >> ((index & 3) << 3)) & 0xff;
464 BIOSLOG(bios, " Indexed IO read: Port: 0x%04X, Index: 0x%02X, "
465 "Head: 0x%02X, Data: 0x%02X\n",
466 port, index, bios->state.crtchead, data);
471 bios_idxprt_wr(struct nvbios *bios, uint16_t port, uint8_t index, uint8_t data)
473 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
474 struct drm_device *dev = bios->dev;
476 if (!valid_idx_port(bios, port))
480 * The current head is maintained in the nvbios member state.crtchead.
481 * We trap changes to CR44 and update the head variable and hence the
482 * register set written.
483 * As CR44 only exists on CRTC0, we update crtchead to head0 in advance
484 * of the write, and to head1 after the write
486 if (port == NV_CIO_CRX__COLOR && index == NV_CIO_CRE_44 &&
487 data != NV_CIO_CRE_44_HEADB)
488 bios->state.crtchead = 0;
490 LOG_OLD_VALUE(bios_idxprt_rd(bios, port, index));
491 BIOSLOG(bios, " Indexed IO write: Port: 0x%04X, Index: 0x%02X, "
492 "Head: 0x%02X, Data: 0x%02X\n",
493 port, index, bios->state.crtchead, data);
495 if (bios->execute && dev_priv->card_type < NV_50) {
497 if (port == NV_VIO_SRX)
498 NVWriteVgaSeq(dev, bios->state.crtchead, index, data);
499 else /* assume NV_CIO_CRX__COLOR */
500 NVWriteVgaCrtc(dev, bios->state.crtchead, index, data);
503 uint32_t data32, shift = (index & 3) << 3;
507 data32 = bios_rd32(bios, NV50_PDISPLAY_VGACRTC(index & ~3));
508 data32 &= ~(0xff << shift);
509 data32 |= (data << shift);
510 bios_wr32(bios, NV50_PDISPLAY_VGACRTC(index & ~3), data32);
513 if (port == NV_CIO_CRX__COLOR &&
514 index == NV_CIO_CRE_44 && data == NV_CIO_CRE_44_HEADB)
515 bios->state.crtchead = 1;
519 bios_port_rd(struct nvbios *bios, uint16_t port)
521 uint8_t data, head = bios->state.crtchead;
523 if (!valid_port(bios, port))
526 data = NVReadPRMVIO(bios->dev, head, NV_PRMVIO0_OFFSET + port);
528 BIOSLOG(bios, " IO read: Port: 0x%04X, Head: 0x%02X, Data: 0x%02X\n",
535 bios_port_wr(struct nvbios *bios, uint16_t port, uint8_t data)
537 int head = bios->state.crtchead;
539 if (!valid_port(bios, port))
542 LOG_OLD_VALUE(bios_port_rd(bios, port));
543 BIOSLOG(bios, " IO write: Port: 0x%04X, Head: 0x%02X, Data: 0x%02X\n",
550 NVWritePRMVIO(bios->dev, head, NV_PRMVIO0_OFFSET + port, data);
554 io_flag_condition_met(struct nvbios *bios, uint16_t offset, uint8_t cond)
557 * The IO flag condition entry has 2 bytes for the CRTC port; 1 byte
558 * for the CRTC index; 1 byte for the mask to apply to the value
559 * retrieved from the CRTC; 1 byte for the shift right to apply to the
560 * masked CRTC value; 2 bytes for the offset to the flag array, to
561 * which the shifted value is added; 1 byte for the mask applied to the
562 * value read from the flag array; and 1 byte for the value to compare
563 * against the masked byte from the flag table.
566 uint16_t condptr = bios->io_flag_condition_tbl_ptr + cond * IO_FLAG_CONDITION_SIZE;
567 uint16_t crtcport = ROM16(bios->data[condptr]);
568 uint8_t crtcindex = bios->data[condptr + 2];
569 uint8_t mask = bios->data[condptr + 3];
570 uint8_t shift = bios->data[condptr + 4];
571 uint16_t flagarray = ROM16(bios->data[condptr + 5]);
572 uint8_t flagarraymask = bios->data[condptr + 7];
573 uint8_t cmpval = bios->data[condptr + 8];
576 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
577 "Shift: 0x%02X, FlagArray: 0x%04X, FAMask: 0x%02X, "
579 offset, crtcport, crtcindex, mask, shift, flagarray, flagarraymask, cmpval);
581 data = bios_idxprt_rd(bios, crtcport, crtcindex);
583 data = bios->data[flagarray + ((data & mask) >> shift)];
584 data &= flagarraymask;
586 BIOSLOG(bios, "0x%04X: Checking if 0x%02X equals 0x%02X\n",
587 offset, data, cmpval);
589 return (data == cmpval);
593 bios_condition_met(struct nvbios *bios, uint16_t offset, uint8_t cond)
596 * The condition table entry has 4 bytes for the address of the
597 * register to check, 4 bytes for a mask to apply to the register and
598 * 4 for a test comparison value
601 uint16_t condptr = bios->condition_tbl_ptr + cond * CONDITION_SIZE;
602 uint32_t reg = ROM32(bios->data[condptr]);
603 uint32_t mask = ROM32(bios->data[condptr + 4]);
604 uint32_t cmpval = ROM32(bios->data[condptr + 8]);
607 BIOSLOG(bios, "0x%04X: Cond: 0x%02X, Reg: 0x%08X, Mask: 0x%08X\n",
608 offset, cond, reg, mask);
610 data = bios_rd32(bios, reg) & mask;
612 BIOSLOG(bios, "0x%04X: Checking if 0x%08X equals 0x%08X\n",
613 offset, data, cmpval);
615 return (data == cmpval);
619 io_condition_met(struct nvbios *bios, uint16_t offset, uint8_t cond)
622 * The IO condition entry has 2 bytes for the IO port address; 1 byte
623 * for the index to write to io_port; 1 byte for the mask to apply to
624 * the byte read from io_port+1; and 1 byte for the value to compare
625 * against the masked byte.
628 uint16_t condptr = bios->io_condition_tbl_ptr + cond * IO_CONDITION_SIZE;
629 uint16_t io_port = ROM16(bios->data[condptr]);
630 uint8_t port_index = bios->data[condptr + 2];
631 uint8_t mask = bios->data[condptr + 3];
632 uint8_t cmpval = bios->data[condptr + 4];
634 uint8_t data = bios_idxprt_rd(bios, io_port, port_index) & mask;
636 BIOSLOG(bios, "0x%04X: Checking if 0x%02X equals 0x%02X\n",
637 offset, data, cmpval);
639 return (data == cmpval);
643 nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk)
645 struct drm_nouveau_private *dev_priv = dev->dev_private;
646 uint32_t reg0 = nv_rd32(dev, reg + 0);
647 uint32_t reg1 = nv_rd32(dev, reg + 4);
648 struct nouveau_pll_vals pll;
649 struct pll_lims pll_limits;
652 ret = get_pll_limits(dev, reg, &pll_limits);
656 clk = nouveau_calc_pll_mnp(dev, &pll_limits, clk, &pll);
660 reg0 = (reg0 & 0xfff8ffff) | (pll.log2P << 16);
661 reg1 = (reg1 & 0xffff0000) | (pll.N1 << 8) | pll.M1;
663 if (dev_priv->vbios.execute) {
665 nv_wr32(dev, reg + 4, reg1);
666 nv_wr32(dev, reg + 0, reg0);
673 setPLL(struct nvbios *bios, uint32_t reg, uint32_t clk)
675 struct drm_device *dev = bios->dev;
676 struct drm_nouveau_private *dev_priv = dev->dev_private;
678 struct pll_lims pll_lim;
679 struct nouveau_pll_vals pllvals;
682 if (dev_priv->card_type >= NV_50)
683 return nv50_pll_set(dev, reg, clk);
685 /* high regs (such as in the mac g5 table) are not -= 4 */
686 ret = get_pll_limits(dev, reg > 0x405c ? reg : reg - 4, &pll_lim);
690 clk = nouveau_calc_pll_mnp(dev, &pll_lim, clk, &pllvals);
696 nouveau_hw_setpll(dev, reg, &pllvals);
702 static int dcb_entry_idx_from_crtchead(struct drm_device *dev)
704 struct drm_nouveau_private *dev_priv = dev->dev_private;
705 struct nvbios *bios = &dev_priv->vbios;
708 * For the results of this function to be correct, CR44 must have been
709 * set (using bios_idxprt_wr to set crtchead), CR58 set for CR57 = 0,
710 * and the DCB table parsed, before the script calling the function is
711 * run. run_digital_op_script is example of how to do such setup
714 uint8_t dcb_entry = NVReadVgaCrtc5758(dev, bios->state.crtchead, 0);
716 if (dcb_entry > bios->dcb.entries) {
717 NV_ERROR(dev, "CR58 doesn't have a valid DCB entry currently "
718 "(%02X)\n", dcb_entry);
719 dcb_entry = 0x7f; /* unused / invalid marker */
726 read_dcb_i2c_entry(struct drm_device *dev, int dcb_version, uint8_t *i2ctable, int index, struct dcb_i2c_entry *i2c)
728 uint8_t dcb_i2c_ver = dcb_version, headerlen = 0, entry_len = 4;
729 int i2c_entries = DCB_MAX_NUM_I2C_ENTRIES;
730 int recordoffset = 0, rdofs = 1, wrofs = 0;
731 uint8_t port_type = 0;
736 if (dcb_version >= 0x30) {
737 if (i2ctable[0] != dcb_version) /* necessary? */
739 "DCB I2C table version mismatch (%02X vs %02X)\n",
740 i2ctable[0], dcb_version);
741 dcb_i2c_ver = i2ctable[0];
742 headerlen = i2ctable[1];
743 if (i2ctable[2] <= DCB_MAX_NUM_I2C_ENTRIES)
744 i2c_entries = i2ctable[2];
747 "DCB I2C table has more entries than indexable "
748 "(%d entries, max %d)\n", i2ctable[2],
749 DCB_MAX_NUM_I2C_ENTRIES);
750 entry_len = i2ctable[3];
751 /* [4] is i2c_default_indices, read in parse_dcb_table() */
754 * It's your own fault if you call this function on a DCB 1.1 BIOS --
755 * the test below is for DCB 1.2
757 if (dcb_version < 0x14) {
765 if (index >= i2c_entries) {
766 NV_ERROR(dev, "DCB I2C index too big (%d >= %d)\n",
770 if (i2ctable[headerlen + entry_len * index + 3] == 0xff) {
771 NV_ERROR(dev, "DCB I2C entry invalid\n");
775 if (dcb_i2c_ver >= 0x30) {
776 port_type = i2ctable[headerlen + recordoffset + 3 + entry_len * index];
779 * Fixup for chips using same address offset for read and
782 if (port_type == 4) /* seen on C51 */
784 if (port_type >= 5) /* G80+ */
788 if (dcb_i2c_ver >= 0x40) {
789 if (port_type != 5 && port_type != 6)
790 NV_WARN(dev, "DCB I2C table has port type %d\n", port_type);
792 i2c->entry = ROM32(i2ctable[headerlen + recordoffset + entry_len * index]);
795 i2c->port_type = port_type;
796 i2c->read = i2ctable[headerlen + recordoffset + rdofs + entry_len * index];
797 i2c->write = i2ctable[headerlen + recordoffset + wrofs + entry_len * index];
802 static struct nouveau_i2c_chan *
803 init_i2c_device_find(struct drm_device *dev, int i2c_index)
805 struct drm_nouveau_private *dev_priv = dev->dev_private;
806 struct dcb_table *dcb = &dev_priv->vbios.dcb;
808 if (i2c_index == 0xff) {
809 /* note: dcb_entry_idx_from_crtchead needs pre-script set-up */
810 int idx = dcb_entry_idx_from_crtchead(dev), shift = 0;
811 int default_indices = dcb->i2c_default_indices;
813 if (idx != 0x7f && dcb->entry[idx].i2c_upper_default)
816 i2c_index = (default_indices >> shift) & 0xf;
818 if (i2c_index == 0x80) /* g80+ */
819 i2c_index = dcb->i2c_default_indices & 0xf;
821 if (i2c_index == 0x81)
822 i2c_index = (dcb->i2c_default_indices & 0xf0) >> 4;
824 if (i2c_index >= DCB_MAX_NUM_I2C_ENTRIES) {
825 NV_ERROR(dev, "invalid i2c_index 0x%x\n", i2c_index);
829 /* Make sure i2c table entry has been parsed, it may not
830 * have been if this is a bus not referenced by a DCB encoder
832 read_dcb_i2c_entry(dev, dcb->version, dcb->i2c_table,
833 i2c_index, &dcb->i2c[i2c_index]);
835 return nouveau_i2c_find(dev, i2c_index);
839 get_tmds_index_reg(struct drm_device *dev, uint8_t mlv)
842 * For mlv < 0x80, it is an index into a table of TMDS base addresses.
843 * For mlv == 0x80 use the "or" value of the dcb_entry indexed by
844 * CR58 for CR57 = 0 to index a table of offsets to the basic
846 * For mlv == 0x81 use the "or" value of the dcb_entry indexed by
847 * CR58 for CR57 = 0 to index a table of offsets to the basic
848 * 0x6808b0 address, and then flip the offset by 8.
851 struct drm_nouveau_private *dev_priv = dev->dev_private;
852 struct nvbios *bios = &dev_priv->vbios;
853 const int pramdac_offset[13] = {
854 0, 0, 0x8, 0, 0x2000, 0, 0, 0, 0x2008, 0, 0, 0, 0x2000 };
855 const uint32_t pramdac_table[4] = {
856 0x6808b0, 0x6808b8, 0x6828b0, 0x6828b8 };
859 int dcb_entry, dacoffset;
861 /* note: dcb_entry_idx_from_crtchead needs pre-script set-up */
862 dcb_entry = dcb_entry_idx_from_crtchead(dev);
863 if (dcb_entry == 0x7f)
865 dacoffset = pramdac_offset[bios->dcb.entry[dcb_entry].or];
868 return 0x6808b0 + dacoffset;
870 if (mlv >= ARRAY_SIZE(pramdac_table)) {
871 NV_ERROR(dev, "Magic Lookup Value too big (%02X)\n",
875 return pramdac_table[mlv];
880 init_io_restrict_prog(struct nvbios *bios, uint16_t offset,
881 struct init_exec *iexec)
884 * INIT_IO_RESTRICT_PROG opcode: 0x32 ('2')
886 * offset (8 bit): opcode
887 * offset + 1 (16 bit): CRTC port
888 * offset + 3 (8 bit): CRTC index
889 * offset + 4 (8 bit): mask
890 * offset + 5 (8 bit): shift
891 * offset + 6 (8 bit): count
892 * offset + 7 (32 bit): register
893 * offset + 11 (32 bit): configuration 1
896 * Starting at offset + 11 there are "count" 32 bit values.
897 * To find out which value to use read index "CRTC index" on "CRTC
898 * port", AND this value with "mask" and then bit shift right "shift"
899 * bits. Read the appropriate value using this index and write to
903 uint16_t crtcport = ROM16(bios->data[offset + 1]);
904 uint8_t crtcindex = bios->data[offset + 3];
905 uint8_t mask = bios->data[offset + 4];
906 uint8_t shift = bios->data[offset + 5];
907 uint8_t count = bios->data[offset + 6];
908 uint32_t reg = ROM32(bios->data[offset + 7]);
911 int len = 11 + count * 4;
916 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
917 "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n",
918 offset, crtcport, crtcindex, mask, shift, count, reg);
920 config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift;
921 if (config > count) {
923 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
924 offset, config, count);
928 configval = ROM32(bios->data[offset + 11 + config * 4]);
930 BIOSLOG(bios, "0x%04X: Writing config %02X\n", offset, config);
932 bios_wr32(bios, reg, configval);
938 init_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
941 * INIT_REPEAT opcode: 0x33 ('3')
943 * offset (8 bit): opcode
944 * offset + 1 (8 bit): count
946 * Execute script following this opcode up to INIT_REPEAT_END
950 uint8_t count = bios->data[offset + 1];
953 /* no iexec->execute check by design */
955 BIOSLOG(bios, "0x%04X: Repeating following segment %d times\n",
958 iexec->repeat = true;
961 * count - 1, as the script block will execute once when we leave this
962 * opcode -- this is compatible with bios behaviour as:
963 * a) the block is always executed at least once, even if count == 0
964 * b) the bios interpreter skips to the op following INIT_END_REPEAT,
967 for (i = 0; i < count - 1; i++)
968 parse_init_table(bios, offset + 2, iexec);
970 iexec->repeat = false;
976 init_io_restrict_pll(struct nvbios *bios, uint16_t offset,
977 struct init_exec *iexec)
980 * INIT_IO_RESTRICT_PLL opcode: 0x34 ('4')
982 * offset (8 bit): opcode
983 * offset + 1 (16 bit): CRTC port
984 * offset + 3 (8 bit): CRTC index
985 * offset + 4 (8 bit): mask
986 * offset + 5 (8 bit): shift
987 * offset + 6 (8 bit): IO flag condition index
988 * offset + 7 (8 bit): count
989 * offset + 8 (32 bit): register
990 * offset + 12 (16 bit): frequency 1
993 * Starting at offset + 12 there are "count" 16 bit frequencies (10kHz).
994 * Set PLL register "register" to coefficients for frequency n,
995 * selected by reading index "CRTC index" of "CRTC port" ANDed with
996 * "mask" and shifted right by "shift".
998 * If "IO flag condition index" > 0, and condition met, double
999 * frequency before setting it.
1002 uint16_t crtcport = ROM16(bios->data[offset + 1]);
1003 uint8_t crtcindex = bios->data[offset + 3];
1004 uint8_t mask = bios->data[offset + 4];
1005 uint8_t shift = bios->data[offset + 5];
1006 int8_t io_flag_condition_idx = bios->data[offset + 6];
1007 uint8_t count = bios->data[offset + 7];
1008 uint32_t reg = ROM32(bios->data[offset + 8]);
1011 int len = 12 + count * 2;
1013 if (!iexec->execute)
1016 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
1017 "Shift: 0x%02X, IO Flag Condition: 0x%02X, "
1018 "Count: 0x%02X, Reg: 0x%08X\n",
1019 offset, crtcport, crtcindex, mask, shift,
1020 io_flag_condition_idx, count, reg);
1022 config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift;
1023 if (config > count) {
1025 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
1026 offset, config, count);
1030 freq = ROM16(bios->data[offset + 12 + config * 2]);
1032 if (io_flag_condition_idx > 0) {
1033 if (io_flag_condition_met(bios, offset, io_flag_condition_idx)) {
1034 BIOSLOG(bios, "0x%04X: Condition fulfilled -- "
1035 "frequency doubled\n", offset);
1038 BIOSLOG(bios, "0x%04X: Condition not fulfilled -- "
1039 "frequency unchanged\n", offset);
1042 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Config: 0x%02X, Freq: %d0kHz\n",
1043 offset, reg, config, freq);
1045 setPLL(bios, reg, freq * 10);
1051 init_end_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1054 * INIT_END_REPEAT opcode: 0x36 ('6')
1056 * offset (8 bit): opcode
1058 * Marks the end of the block for INIT_REPEAT to repeat
1061 /* no iexec->execute check by design */
1064 * iexec->repeat flag necessary to go past INIT_END_REPEAT opcode when
1065 * we're not in repeat mode
1074 init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1077 * INIT_COPY opcode: 0x37 ('7')
1079 * offset (8 bit): opcode
1080 * offset + 1 (32 bit): register
1081 * offset + 5 (8 bit): shift
1082 * offset + 6 (8 bit): srcmask
1083 * offset + 7 (16 bit): CRTC port
1084 * offset + 9 (8 bit): CRTC index
1085 * offset + 10 (8 bit): mask
1087 * Read index "CRTC index" on "CRTC port", AND with "mask", OR with
1088 * (REGVAL("register") >> "shift" & "srcmask") and write-back to CRTC
1092 uint32_t reg = ROM32(bios->data[offset + 1]);
1093 uint8_t shift = bios->data[offset + 5];
1094 uint8_t srcmask = bios->data[offset + 6];
1095 uint16_t crtcport = ROM16(bios->data[offset + 7]);
1096 uint8_t crtcindex = bios->data[offset + 9];
1097 uint8_t mask = bios->data[offset + 10];
1101 if (!iexec->execute)
1104 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%02X, "
1105 "Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X\n",
1106 offset, reg, shift, srcmask, crtcport, crtcindex, mask);
1108 data = bios_rd32(bios, reg);
1113 data <<= (0x100 - shift);
1117 crtcdata = bios_idxprt_rd(bios, crtcport, crtcindex) & mask;
1118 crtcdata |= (uint8_t)data;
1119 bios_idxprt_wr(bios, crtcport, crtcindex, crtcdata);
1125 init_not(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1128 * INIT_NOT opcode: 0x38 ('8')
1130 * offset (8 bit): opcode
1132 * Invert the current execute / no-execute condition (i.e. "else")
1135 BIOSLOG(bios, "0x%04X: ------ Skipping following commands ------\n", offset);
1137 BIOSLOG(bios, "0x%04X: ------ Executing following commands ------\n", offset);
1139 iexec->execute = !iexec->execute;
1144 init_io_flag_condition(struct nvbios *bios, uint16_t offset,
1145 struct init_exec *iexec)
1148 * INIT_IO_FLAG_CONDITION opcode: 0x39 ('9')
1150 * offset (8 bit): opcode
1151 * offset + 1 (8 bit): condition number
1153 * Check condition "condition number" in the IO flag condition table.
1154 * If condition not met skip subsequent opcodes until condition is
1155 * inverted (INIT_NOT), or we hit INIT_RESUME
1158 uint8_t cond = bios->data[offset + 1];
1160 if (!iexec->execute)
1163 if (io_flag_condition_met(bios, offset, cond))
1164 BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
1166 BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
1167 iexec->execute = false;
1174 init_dp_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1177 * INIT_DP_CONDITION opcode: 0x3A ('')
1179 * offset (8 bit): opcode
1180 * offset + 1 (8 bit): "sub" opcode
1181 * offset + 2 (8 bit): unknown
1185 struct bit_displayport_encoder_table *dpe = NULL;
1186 struct dcb_entry *dcb = bios->display.output;
1187 struct drm_device *dev = bios->dev;
1188 uint8_t cond = bios->data[offset + 1];
1191 BIOSLOG(bios, "0x%04X: subop 0x%02X\n", offset, cond);
1193 if (!iexec->execute)
1196 dpe = nouveau_bios_dp_table(dev, dcb, &dummy);
1198 NV_ERROR(dev, "0x%04X: INIT_3A: no encoder table!!\n", offset);
1205 struct dcb_connector_table_entry *ent =
1206 &bios->dcb.connector.entry[dcb->connector];
1208 if (ent->type != DCB_CONNECTOR_eDP)
1209 iexec->execute = false;
1214 if (!(dpe->unknown & cond))
1215 iexec->execute = false;
1219 struct nouveau_i2c_chan *auxch;
1222 auxch = nouveau_i2c_find(dev, bios->display.output->i2c_index);
1224 NV_ERROR(dev, "0x%04X: couldn't get auxch\n", offset);
1228 ret = nouveau_dp_auxch(auxch, 9, 0xd, &cond, 1);
1230 NV_ERROR(dev, "0x%04X: auxch rd fail: %d\n", offset, ret);
1235 iexec->execute = false;
1239 NV_WARN(dev, "0x%04X: unknown INIT_3A op: %d\n", offset, cond);
1244 BIOSLOG(bios, "0x%04X: continuing to execute\n", offset);
1246 BIOSLOG(bios, "0x%04X: skipping following commands\n", offset);
1252 init_op_3b(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1255 * INIT_3B opcode: 0x3B ('')
1257 * offset (8 bit): opcode
1258 * offset + 1 (8 bit): crtc index
1262 uint8_t or = ffs(bios->display.output->or) - 1;
1263 uint8_t index = bios->data[offset + 1];
1266 if (!iexec->execute)
1269 data = bios_idxprt_rd(bios, 0x3d4, index);
1270 bios_idxprt_wr(bios, 0x3d4, index, data & ~(1 << or));
1275 init_op_3c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1278 * INIT_3C opcode: 0x3C ('')
1280 * offset (8 bit): opcode
1281 * offset + 1 (8 bit): crtc index
1285 uint8_t or = ffs(bios->display.output->or) - 1;
1286 uint8_t index = bios->data[offset + 1];
1289 if (!iexec->execute)
1292 data = bios_idxprt_rd(bios, 0x3d4, index);
1293 bios_idxprt_wr(bios, 0x3d4, index, data | (1 << or));
1298 init_idx_addr_latched(struct nvbios *bios, uint16_t offset,
1299 struct init_exec *iexec)
1302 * INIT_INDEX_ADDRESS_LATCHED opcode: 0x49 ('I')
1304 * offset (8 bit): opcode
1305 * offset + 1 (32 bit): control register
1306 * offset + 5 (32 bit): data register
1307 * offset + 9 (32 bit): mask
1308 * offset + 13 (32 bit): data
1309 * offset + 17 (8 bit): count
1310 * offset + 18 (8 bit): address 1
1311 * offset + 19 (8 bit): data 1
1314 * For each of "count" address and data pairs, write "data n" to
1315 * "data register", read the current value of "control register",
1316 * and write it back once ANDed with "mask", ORed with "data",
1317 * and ORed with "address n"
1320 uint32_t controlreg = ROM32(bios->data[offset + 1]);
1321 uint32_t datareg = ROM32(bios->data[offset + 5]);
1322 uint32_t mask = ROM32(bios->data[offset + 9]);
1323 uint32_t data = ROM32(bios->data[offset + 13]);
1324 uint8_t count = bios->data[offset + 17];
1325 int len = 18 + count * 2;
1329 if (!iexec->execute)
1332 BIOSLOG(bios, "0x%04X: ControlReg: 0x%08X, DataReg: 0x%08X, "
1333 "Mask: 0x%08X, Data: 0x%08X, Count: 0x%02X\n",
1334 offset, controlreg, datareg, mask, data, count);
1336 for (i = 0; i < count; i++) {
1337 uint8_t instaddress = bios->data[offset + 18 + i * 2];
1338 uint8_t instdata = bios->data[offset + 19 + i * 2];
1340 BIOSLOG(bios, "0x%04X: Address: 0x%02X, Data: 0x%02X\n",
1341 offset, instaddress, instdata);
1343 bios_wr32(bios, datareg, instdata);
1344 value = bios_rd32(bios, controlreg) & mask;
1346 value |= instaddress;
1347 bios_wr32(bios, controlreg, value);
1354 init_io_restrict_pll2(struct nvbios *bios, uint16_t offset,
1355 struct init_exec *iexec)
1358 * INIT_IO_RESTRICT_PLL2 opcode: 0x4A ('J')
1360 * offset (8 bit): opcode
1361 * offset + 1 (16 bit): CRTC port
1362 * offset + 3 (8 bit): CRTC index
1363 * offset + 4 (8 bit): mask
1364 * offset + 5 (8 bit): shift
1365 * offset + 6 (8 bit): count
1366 * offset + 7 (32 bit): register
1367 * offset + 11 (32 bit): frequency 1
1370 * Starting at offset + 11 there are "count" 32 bit frequencies (kHz).
1371 * Set PLL register "register" to coefficients for frequency n,
1372 * selected by reading index "CRTC index" of "CRTC port" ANDed with
1373 * "mask" and shifted right by "shift".
1376 uint16_t crtcport = ROM16(bios->data[offset + 1]);
1377 uint8_t crtcindex = bios->data[offset + 3];
1378 uint8_t mask = bios->data[offset + 4];
1379 uint8_t shift = bios->data[offset + 5];
1380 uint8_t count = bios->data[offset + 6];
1381 uint32_t reg = ROM32(bios->data[offset + 7]);
1382 int len = 11 + count * 4;
1386 if (!iexec->execute)
1389 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
1390 "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n",
1391 offset, crtcport, crtcindex, mask, shift, count, reg);
1396 config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift;
1397 if (config > count) {
1399 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
1400 offset, config, count);
1404 freq = ROM32(bios->data[offset + 11 + config * 4]);
1406 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Config: 0x%02X, Freq: %dkHz\n",
1407 offset, reg, config, freq);
1409 setPLL(bios, reg, freq);
1415 init_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1418 * INIT_PLL2 opcode: 0x4B ('K')
1420 * offset (8 bit): opcode
1421 * offset + 1 (32 bit): register
1422 * offset + 5 (32 bit): freq
1424 * Set PLL register "register" to coefficients for frequency "freq"
1427 uint32_t reg = ROM32(bios->data[offset + 1]);
1428 uint32_t freq = ROM32(bios->data[offset + 5]);
1430 if (!iexec->execute)
1433 BIOSLOG(bios, "0x%04X: Reg: 0x%04X, Freq: %dkHz\n",
1436 setPLL(bios, reg, freq);
1441 init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1444 * INIT_I2C_BYTE opcode: 0x4C ('L')
1446 * offset (8 bit): opcode
1447 * offset + 1 (8 bit): DCB I2C table entry index
1448 * offset + 2 (8 bit): I2C slave address
1449 * offset + 3 (8 bit): count
1450 * offset + 4 (8 bit): I2C register 1
1451 * offset + 5 (8 bit): mask 1
1452 * offset + 6 (8 bit): data 1
1455 * For each of "count" registers given by "I2C register n" on the device
1456 * addressed by "I2C slave address" on the I2C bus given by
1457 * "DCB I2C table entry index", read the register, AND the result with
1458 * "mask n" and OR it with "data n" before writing it back to the device
1461 struct drm_device *dev = bios->dev;
1462 uint8_t i2c_index = bios->data[offset + 1];
1463 uint8_t i2c_address = bios->data[offset + 2] >> 1;
1464 uint8_t count = bios->data[offset + 3];
1465 struct nouveau_i2c_chan *chan;
1466 int len = 4 + count * 3;
1469 if (!iexec->execute)
1472 BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, "
1474 offset, i2c_index, i2c_address, count);
1476 chan = init_i2c_device_find(dev, i2c_index);
1478 NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
1482 for (i = 0; i < count; i++) {
1483 uint8_t reg = bios->data[offset + 4 + i * 3];
1484 uint8_t mask = bios->data[offset + 5 + i * 3];
1485 uint8_t data = bios->data[offset + 6 + i * 3];
1486 union i2c_smbus_data val;
1488 ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
1489 I2C_SMBUS_READ, reg,
1490 I2C_SMBUS_BYTE_DATA, &val);
1492 NV_ERROR(dev, "0x%04X: i2c rd fail: %d\n", offset, ret);
1496 BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, "
1497 "Mask: 0x%02X, Data: 0x%02X\n",
1498 offset, reg, val.byte, mask, data);
1505 ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
1506 I2C_SMBUS_WRITE, reg,
1507 I2C_SMBUS_BYTE_DATA, &val);
1509 NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
1518 init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1521 * INIT_ZM_I2C_BYTE opcode: 0x4D ('M')
1523 * offset (8 bit): opcode
1524 * offset + 1 (8 bit): DCB I2C table entry index
1525 * offset + 2 (8 bit): I2C slave address
1526 * offset + 3 (8 bit): count
1527 * offset + 4 (8 bit): I2C register 1
1528 * offset + 5 (8 bit): data 1
1531 * For each of "count" registers given by "I2C register n" on the device
1532 * addressed by "I2C slave address" on the I2C bus given by
1533 * "DCB I2C table entry index", set the register to "data n"
1536 struct drm_device *dev = bios->dev;
1537 uint8_t i2c_index = bios->data[offset + 1];
1538 uint8_t i2c_address = bios->data[offset + 2] >> 1;
1539 uint8_t count = bios->data[offset + 3];
1540 struct nouveau_i2c_chan *chan;
1541 int len = 4 + count * 2;
1544 if (!iexec->execute)
1547 BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, "
1549 offset, i2c_index, i2c_address, count);
1551 chan = init_i2c_device_find(dev, i2c_index);
1553 NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
1557 for (i = 0; i < count; i++) {
1558 uint8_t reg = bios->data[offset + 4 + i * 2];
1559 union i2c_smbus_data val;
1561 val.byte = bios->data[offset + 5 + i * 2];
1563 BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Data: 0x%02X\n",
1564 offset, reg, val.byte);
1569 ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
1570 I2C_SMBUS_WRITE, reg,
1571 I2C_SMBUS_BYTE_DATA, &val);
1573 NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
1582 init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1585 * INIT_ZM_I2C opcode: 0x4E ('N')
1587 * offset (8 bit): opcode
1588 * offset + 1 (8 bit): DCB I2C table entry index
1589 * offset + 2 (8 bit): I2C slave address
1590 * offset + 3 (8 bit): count
1591 * offset + 4 (8 bit): data 1
1594 * Send "count" bytes ("data n") to the device addressed by "I2C slave
1595 * address" on the I2C bus given by "DCB I2C table entry index"
1598 struct drm_device *dev = bios->dev;
1599 uint8_t i2c_index = bios->data[offset + 1];
1600 uint8_t i2c_address = bios->data[offset + 2] >> 1;
1601 uint8_t count = bios->data[offset + 3];
1602 int len = 4 + count;
1603 struct nouveau_i2c_chan *chan;
1608 if (!iexec->execute)
1611 BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, "
1613 offset, i2c_index, i2c_address, count);
1615 chan = init_i2c_device_find(dev, i2c_index);
1617 NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
1621 for (i = 0; i < count; i++) {
1622 data[i] = bios->data[offset + 4 + i];
1624 BIOSLOG(bios, "0x%04X: Data: 0x%02X\n", offset, data[i]);
1627 if (bios->execute) {
1628 msg.addr = i2c_address;
1632 ret = i2c_transfer(&chan->adapter, &msg, 1);
1634 NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
1643 init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1646 * INIT_TMDS opcode: 0x4F ('O') (non-canon name)
1648 * offset (8 bit): opcode
1649 * offset + 1 (8 bit): magic lookup value
1650 * offset + 2 (8 bit): TMDS address
1651 * offset + 3 (8 bit): mask
1652 * offset + 4 (8 bit): data
1654 * Read the data reg for TMDS address "TMDS address", AND it with mask
1655 * and OR it with data, then write it back
1656 * "magic lookup value" determines which TMDS base address register is
1657 * used -- see get_tmds_index_reg()
1660 struct drm_device *dev = bios->dev;
1661 uint8_t mlv = bios->data[offset + 1];
1662 uint32_t tmdsaddr = bios->data[offset + 2];
1663 uint8_t mask = bios->data[offset + 3];
1664 uint8_t data = bios->data[offset + 4];
1665 uint32_t reg, value;
1667 if (!iexec->execute)
1670 BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, TMDSAddr: 0x%02X, "
1671 "Mask: 0x%02X, Data: 0x%02X\n",
1672 offset, mlv, tmdsaddr, mask, data);
1674 reg = get_tmds_index_reg(bios->dev, mlv);
1676 NV_ERROR(dev, "0x%04X: no tmds_index_reg\n", offset);
1680 bios_wr32(bios, reg,
1681 tmdsaddr | NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE);
1682 value = (bios_rd32(bios, reg + 4) & mask) | data;
1683 bios_wr32(bios, reg + 4, value);
1684 bios_wr32(bios, reg, tmdsaddr);
1690 init_zm_tmds_group(struct nvbios *bios, uint16_t offset,
1691 struct init_exec *iexec)
1694 * INIT_ZM_TMDS_GROUP opcode: 0x50 ('P') (non-canon name)
1696 * offset (8 bit): opcode
1697 * offset + 1 (8 bit): magic lookup value
1698 * offset + 2 (8 bit): count
1699 * offset + 3 (8 bit): addr 1
1700 * offset + 4 (8 bit): data 1
1703 * For each of "count" TMDS address and data pairs write "data n" to
1704 * "addr n". "magic lookup value" determines which TMDS base address
1705 * register is used -- see get_tmds_index_reg()
1708 struct drm_device *dev = bios->dev;
1709 uint8_t mlv = bios->data[offset + 1];
1710 uint8_t count = bios->data[offset + 2];
1711 int len = 3 + count * 2;
1715 if (!iexec->execute)
1718 BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, Count: 0x%02X\n",
1719 offset, mlv, count);
1721 reg = get_tmds_index_reg(bios->dev, mlv);
1723 NV_ERROR(dev, "0x%04X: no tmds_index_reg\n", offset);
1727 for (i = 0; i < count; i++) {
1728 uint8_t tmdsaddr = bios->data[offset + 3 + i * 2];
1729 uint8_t tmdsdata = bios->data[offset + 4 + i * 2];
1731 bios_wr32(bios, reg + 4, tmdsdata);
1732 bios_wr32(bios, reg, tmdsaddr);
1739 init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset,
1740 struct init_exec *iexec)
1743 * INIT_CR_INDEX_ADDRESS_LATCHED opcode: 0x51 ('Q')
1745 * offset (8 bit): opcode
1746 * offset + 1 (8 bit): CRTC index1
1747 * offset + 2 (8 bit): CRTC index2
1748 * offset + 3 (8 bit): baseaddr
1749 * offset + 4 (8 bit): count
1750 * offset + 5 (8 bit): data 1
1753 * For each of "count" address and data pairs, write "baseaddr + n" to
1754 * "CRTC index1" and "data n" to "CRTC index2"
1755 * Once complete, restore initial value read from "CRTC index1"
1757 uint8_t crtcindex1 = bios->data[offset + 1];
1758 uint8_t crtcindex2 = bios->data[offset + 2];
1759 uint8_t baseaddr = bios->data[offset + 3];
1760 uint8_t count = bios->data[offset + 4];
1761 int len = 5 + count;
1762 uint8_t oldaddr, data;
1765 if (!iexec->execute)
1768 BIOSLOG(bios, "0x%04X: Index1: 0x%02X, Index2: 0x%02X, "
1769 "BaseAddr: 0x%02X, Count: 0x%02X\n",
1770 offset, crtcindex1, crtcindex2, baseaddr, count);
1772 oldaddr = bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, crtcindex1);
1774 for (i = 0; i < count; i++) {
1775 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex1,
1777 data = bios->data[offset + 5 + i];
1778 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex2, data);
1781 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex1, oldaddr);
1787 init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1790 * INIT_CR opcode: 0x52 ('R')
1792 * offset (8 bit): opcode
1793 * offset + 1 (8 bit): CRTC index
1794 * offset + 2 (8 bit): mask
1795 * offset + 3 (8 bit): data
1797 * Assign the value of at "CRTC index" ANDed with mask and ORed with
1798 * data back to "CRTC index"
1801 uint8_t crtcindex = bios->data[offset + 1];
1802 uint8_t mask = bios->data[offset + 2];
1803 uint8_t data = bios->data[offset + 3];
1806 if (!iexec->execute)
1809 BIOSLOG(bios, "0x%04X: Index: 0x%02X, Mask: 0x%02X, Data: 0x%02X\n",
1810 offset, crtcindex, mask, data);
1812 value = bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, crtcindex) & mask;
1814 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, value);
1820 init_zm_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1823 * INIT_ZM_CR opcode: 0x53 ('S')
1825 * offset (8 bit): opcode
1826 * offset + 1 (8 bit): CRTC index
1827 * offset + 2 (8 bit): value
1829 * Assign "value" to CRTC register with index "CRTC index".
1832 uint8_t crtcindex = ROM32(bios->data[offset + 1]);
1833 uint8_t data = bios->data[offset + 2];
1835 if (!iexec->execute)
1838 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, data);
1844 init_zm_cr_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1847 * INIT_ZM_CR_GROUP opcode: 0x54 ('T')
1849 * offset (8 bit): opcode
1850 * offset + 1 (8 bit): count
1851 * offset + 2 (8 bit): CRTC index 1
1852 * offset + 3 (8 bit): value 1
1855 * For "count", assign "value n" to CRTC register with index
1859 uint8_t count = bios->data[offset + 1];
1860 int len = 2 + count * 2;
1863 if (!iexec->execute)
1866 for (i = 0; i < count; i++)
1867 init_zm_cr(bios, offset + 2 + 2 * i - 1, iexec);
1873 init_condition_time(struct nvbios *bios, uint16_t offset,
1874 struct init_exec *iexec)
1877 * INIT_CONDITION_TIME opcode: 0x56 ('V')
1879 * offset (8 bit): opcode
1880 * offset + 1 (8 bit): condition number
1881 * offset + 2 (8 bit): retries / 50
1883 * Check condition "condition number" in the condition table.
1884 * Bios code then sleeps for 2ms if the condition is not met, and
1885 * repeats up to "retries" times, but on one C51 this has proved
1886 * insufficient. In mmiotraces the driver sleeps for 20ms, so we do
1887 * this, and bail after "retries" times, or 2s, whichever is less.
1888 * If still not met after retries, clear execution flag for this table.
1891 uint8_t cond = bios->data[offset + 1];
1892 uint16_t retries = bios->data[offset + 2] * 50;
1895 if (!iexec->execute)
1901 BIOSLOG(bios, "0x%04X: Condition: 0x%02X, Retries: 0x%02X\n",
1902 offset, cond, retries);
1904 if (!bios->execute) /* avoid 2s delays when "faking" execution */
1907 for (cnt = 0; cnt < retries; cnt++) {
1908 if (bios_condition_met(bios, offset, cond)) {
1909 BIOSLOG(bios, "0x%04X: Condition met, continuing\n",
1913 BIOSLOG(bios, "0x%04X: "
1914 "Condition not met, sleeping for 20ms\n",
1920 if (!bios_condition_met(bios, offset, cond)) {
1922 "0x%04X: Condition still not met after %dms, "
1923 "skipping following opcodes\n", offset, 20 * retries);
1924 iexec->execute = false;
1931 init_zm_reg_sequence(struct nvbios *bios, uint16_t offset,
1932 struct init_exec *iexec)
1935 * INIT_ZM_REG_SEQUENCE opcode: 0x58 ('X')
1937 * offset (8 bit): opcode
1938 * offset + 1 (32 bit): base register
1939 * offset + 5 (8 bit): count
1940 * offset + 6 (32 bit): value 1
1943 * Starting at offset + 6 there are "count" 32 bit values.
1944 * For "count" iterations set "base register" + 4 * current_iteration
1945 * to "value current_iteration"
1948 uint32_t basereg = ROM32(bios->data[offset + 1]);
1949 uint32_t count = bios->data[offset + 5];
1950 int len = 6 + count * 4;
1953 if (!iexec->execute)
1956 BIOSLOG(bios, "0x%04X: BaseReg: 0x%08X, Count: 0x%02X\n",
1957 offset, basereg, count);
1959 for (i = 0; i < count; i++) {
1960 uint32_t reg = basereg + i * 4;
1961 uint32_t data = ROM32(bios->data[offset + 6 + i * 4]);
1963 bios_wr32(bios, reg, data);
1970 init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1973 * INIT_SUB_DIRECT opcode: 0x5B ('[')
1975 * offset (8 bit): opcode
1976 * offset + 1 (16 bit): subroutine offset (in bios)
1978 * Calls a subroutine that will execute commands until INIT_DONE
1982 uint16_t sub_offset = ROM16(bios->data[offset + 1]);
1984 if (!iexec->execute)
1987 BIOSLOG(bios, "0x%04X: Executing subroutine at 0x%04X\n",
1988 offset, sub_offset);
1990 parse_init_table(bios, sub_offset, iexec);
1992 BIOSLOG(bios, "0x%04X: End of 0x%04X subroutine\n", offset, sub_offset);
1998 init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2001 * INIT_COPY_NV_REG opcode: 0x5F ('_')
2003 * offset (8 bit): opcode
2004 * offset + 1 (32 bit): src reg
2005 * offset + 5 (8 bit): shift
2006 * offset + 6 (32 bit): src mask
2007 * offset + 10 (32 bit): xor
2008 * offset + 14 (32 bit): dst reg
2009 * offset + 18 (32 bit): dst mask
2011 * Shift REGVAL("src reg") right by (signed) "shift", AND result with
2012 * "src mask", then XOR with "xor". Write this OR'd with
2013 * (REGVAL("dst reg") AND'd with "dst mask") to "dst reg"
2016 uint32_t srcreg = *((uint32_t *)(&bios->data[offset + 1]));
2017 uint8_t shift = bios->data[offset + 5];
2018 uint32_t srcmask = *((uint32_t *)(&bios->data[offset + 6]));
2019 uint32_t xor = *((uint32_t *)(&bios->data[offset + 10]));
2020 uint32_t dstreg = *((uint32_t *)(&bios->data[offset + 14]));
2021 uint32_t dstmask = *((uint32_t *)(&bios->data[offset + 18]));
2022 uint32_t srcvalue, dstvalue;
2024 if (!iexec->execute)
2027 BIOSLOG(bios, "0x%04X: SrcReg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%08X, "
2028 "Xor: 0x%08X, DstReg: 0x%08X, DstMask: 0x%08X\n",
2029 offset, srcreg, shift, srcmask, xor, dstreg, dstmask);
2031 srcvalue = bios_rd32(bios, srcreg);
2036 srcvalue <<= (0x100 - shift);
2038 srcvalue = (srcvalue & srcmask) ^ xor;
2040 dstvalue = bios_rd32(bios, dstreg) & dstmask;
2042 bios_wr32(bios, dstreg, dstvalue | srcvalue);
2048 init_zm_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2051 * INIT_ZM_INDEX_IO opcode: 0x62 ('b')
2053 * offset (8 bit): opcode
2054 * offset + 1 (16 bit): CRTC port
2055 * offset + 3 (8 bit): CRTC index
2056 * offset + 4 (8 bit): data
2058 * Write "data" to index "CRTC index" of "CRTC port"
2060 uint16_t crtcport = ROM16(bios->data[offset + 1]);
2061 uint8_t crtcindex = bios->data[offset + 3];
2062 uint8_t data = bios->data[offset + 4];
2064 if (!iexec->execute)
2067 bios_idxprt_wr(bios, crtcport, crtcindex, data);
2073 bios_md32(struct nvbios *bios, uint32_t reg,
2074 uint32_t mask, uint32_t val)
2076 bios_wr32(bios, reg, (bios_rd32(bios, reg) & ~mask) | val);
2080 peek_fb(struct drm_device *dev, struct io_mapping *fb,
2085 if (off < pci_resource_len(dev->pdev, 1)) {
2086 uint32_t __iomem *p = io_mapping_map_atomic_wc(fb, off);
2090 io_mapping_unmap_atomic(p);
2097 poke_fb(struct drm_device *dev, struct io_mapping *fb,
2098 uint32_t off, uint32_t val)
2100 if (off < pci_resource_len(dev->pdev, 1)) {
2101 uint32_t __iomem *p = io_mapping_map_atomic_wc(fb, off);
2106 io_mapping_unmap_atomic(p);
2111 read_back_fb(struct drm_device *dev, struct io_mapping *fb,
2112 uint32_t off, uint32_t val)
2114 poke_fb(dev, fb, off, val);
2115 return val == peek_fb(dev, fb, off);
2119 nv04_init_compute_mem(struct nvbios *bios)
2121 struct drm_device *dev = bios->dev;
2122 uint32_t patt = 0xdeadbeef;
2123 struct io_mapping *fb;
2126 /* Map the framebuffer aperture */
2127 fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
2128 pci_resource_len(dev->pdev, 1));
2132 /* Sequencer and refresh off */
2133 NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) | 0x20);
2134 bios_md32(bios, NV04_PFB_DEBUG_0, 0, NV04_PFB_DEBUG_0_REFRESH_OFF);
2136 bios_md32(bios, NV04_PFB_BOOT_0, ~0,
2137 NV04_PFB_BOOT_0_RAM_AMOUNT_16MB |
2138 NV04_PFB_BOOT_0_RAM_WIDTH_128 |
2139 NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_16MBIT);
2141 for (i = 0; i < 4; i++)
2142 poke_fb(dev, fb, 4 * i, patt);
2144 poke_fb(dev, fb, 0x400000, patt + 1);
2146 if (peek_fb(dev, fb, 0) == patt + 1) {
2147 bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_TYPE,
2148 NV04_PFB_BOOT_0_RAM_TYPE_SDRAM_16MBIT);
2149 bios_md32(bios, NV04_PFB_DEBUG_0,
2150 NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
2152 for (i = 0; i < 4; i++)
2153 poke_fb(dev, fb, 4 * i, patt);
2155 if ((peek_fb(dev, fb, 0xc) & 0xffff) != (patt & 0xffff))
2156 bios_md32(bios, NV04_PFB_BOOT_0,
2157 NV04_PFB_BOOT_0_RAM_WIDTH_128 |
2158 NV04_PFB_BOOT_0_RAM_AMOUNT,
2159 NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
2161 } else if ((peek_fb(dev, fb, 0xc) & 0xffff0000) !=
2162 (patt & 0xffff0000)) {
2163 bios_md32(bios, NV04_PFB_BOOT_0,
2164 NV04_PFB_BOOT_0_RAM_WIDTH_128 |
2165 NV04_PFB_BOOT_0_RAM_AMOUNT,
2166 NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
2168 } else if (peek_fb(dev, fb, 0) == patt) {
2169 if (read_back_fb(dev, fb, 0x800000, patt))
2170 bios_md32(bios, NV04_PFB_BOOT_0,
2171 NV04_PFB_BOOT_0_RAM_AMOUNT,
2172 NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
2174 bios_md32(bios, NV04_PFB_BOOT_0,
2175 NV04_PFB_BOOT_0_RAM_AMOUNT,
2176 NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
2178 bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_TYPE,
2179 NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_8MBIT);
2181 } else if (!read_back_fb(dev, fb, 0x800000, patt)) {
2182 bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
2183 NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
2187 /* Refresh on, sequencer on */
2188 bios_md32(bios, NV04_PFB_DEBUG_0, NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
2189 NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) & ~0x20);
2191 io_mapping_free(fb);
2195 static const uint8_t *
2196 nv05_memory_config(struct nvbios *bios)
2198 /* Defaults for BIOSes lacking a memory config table */
2199 static const uint8_t default_config_tab[][2] = {
2209 int i = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) &
2210 NV_PEXTDEV_BOOT_0_RAMCFG) >> 2;
2212 if (bios->legacy.mem_init_tbl_ptr)
2213 return &bios->data[bios->legacy.mem_init_tbl_ptr + 2 * i];
2215 return default_config_tab[i];
2219 nv05_init_compute_mem(struct nvbios *bios)
2221 struct drm_device *dev = bios->dev;
2222 const uint8_t *ramcfg = nv05_memory_config(bios);
2223 uint32_t patt = 0xdeadbeef;
2224 struct io_mapping *fb;
2227 /* Map the framebuffer aperture */
2228 fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
2229 pci_resource_len(dev->pdev, 1));
2234 NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) | 0x20);
2236 if (bios_rd32(bios, NV04_PFB_BOOT_0) & NV04_PFB_BOOT_0_UMA_ENABLE)
2239 bios_md32(bios, NV04_PFB_DEBUG_0, NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
2241 /* If present load the hardcoded scrambling table */
2242 if (bios->legacy.mem_init_tbl_ptr) {
2243 uint32_t *scramble_tab = (uint32_t *)&bios->data[
2244 bios->legacy.mem_init_tbl_ptr + 0x10];
2246 for (i = 0; i < 8; i++)
2247 bios_wr32(bios, NV04_PFB_SCRAMBLE(i),
2248 ROM32(scramble_tab[i]));
2251 /* Set memory type/width/length defaults depending on the straps */
2252 bios_md32(bios, NV04_PFB_BOOT_0, 0x3f, ramcfg[0]);
2254 if (ramcfg[1] & 0x80)
2255 bios_md32(bios, NV04_PFB_CFG0, 0, NV04_PFB_CFG0_SCRAMBLE);
2257 bios_md32(bios, NV04_PFB_CFG1, 0x700001, (ramcfg[1] & 1) << 20);
2258 bios_md32(bios, NV04_PFB_CFG1, 0, 1);
2260 /* Probe memory bus width */
2261 for (i = 0; i < 4; i++)
2262 poke_fb(dev, fb, 4 * i, patt);
2264 if (peek_fb(dev, fb, 0xc) != patt)
2265 bios_md32(bios, NV04_PFB_BOOT_0,
2266 NV04_PFB_BOOT_0_RAM_WIDTH_128, 0);
2268 /* Probe memory length */
2269 v = bios_rd32(bios, NV04_PFB_BOOT_0) & NV04_PFB_BOOT_0_RAM_AMOUNT;
2271 if (v == NV04_PFB_BOOT_0_RAM_AMOUNT_32MB &&
2272 (!read_back_fb(dev, fb, 0x1000000, ++patt) ||
2273 !read_back_fb(dev, fb, 0, ++patt)))
2274 bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
2275 NV04_PFB_BOOT_0_RAM_AMOUNT_16MB);
2277 if (v == NV04_PFB_BOOT_0_RAM_AMOUNT_16MB &&
2278 !read_back_fb(dev, fb, 0x800000, ++patt))
2279 bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
2280 NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
2282 if (!read_back_fb(dev, fb, 0x400000, ++patt))
2283 bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
2284 NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
2288 NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) & ~0x20);
2290 io_mapping_free(fb);
2295 nv10_init_compute_mem(struct nvbios *bios)
2297 struct drm_device *dev = bios->dev;
2298 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
2299 const int mem_width[] = { 0x10, 0x00, 0x20 };
2300 const int mem_width_count = (dev_priv->chipset >= 0x17 ? 3 : 2);
2301 uint32_t patt = 0xdeadbeef;
2302 struct io_mapping *fb;
2305 /* Map the framebuffer aperture */
2306 fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
2307 pci_resource_len(dev->pdev, 1));
2311 bios_wr32(bios, NV10_PFB_REFCTRL, NV10_PFB_REFCTRL_VALID_1);
2313 /* Probe memory bus width */
2314 for (i = 0; i < mem_width_count; i++) {
2315 bios_md32(bios, NV04_PFB_CFG0, 0x30, mem_width[i]);
2317 for (j = 0; j < 4; j++) {
2318 for (k = 0; k < 4; k++)
2319 poke_fb(dev, fb, 0x1c, 0);
2321 poke_fb(dev, fb, 0x1c, patt);
2322 poke_fb(dev, fb, 0x3c, 0);
2324 if (peek_fb(dev, fb, 0x1c) == patt)
2325 goto mem_width_found;
2332 /* Probe amount of installed memory */
2333 for (i = 0; i < 4; i++) {
2334 int off = bios_rd32(bios, NV04_PFB_FIFO_DATA) - 0x100000;
2336 poke_fb(dev, fb, off, patt);
2337 poke_fb(dev, fb, 0, 0);
2339 peek_fb(dev, fb, 0);
2340 peek_fb(dev, fb, 0);
2341 peek_fb(dev, fb, 0);
2342 peek_fb(dev, fb, 0);
2344 if (peek_fb(dev, fb, off) == patt)
2348 /* IC missing - disable the upper half memory space. */
2349 bios_md32(bios, NV04_PFB_CFG0, 0x1000, 0);
2352 io_mapping_free(fb);
2357 nv20_init_compute_mem(struct nvbios *bios)
2359 struct drm_device *dev = bios->dev;
2360 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
2361 uint32_t mask = (dev_priv->chipset >= 0x25 ? 0x300 : 0x900);
2362 uint32_t amount, off;
2363 struct io_mapping *fb;
2365 /* Map the framebuffer aperture */
2366 fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
2367 pci_resource_len(dev->pdev, 1));
2371 bios_wr32(bios, NV10_PFB_REFCTRL, NV10_PFB_REFCTRL_VALID_1);
2373 /* Allow full addressing */
2374 bios_md32(bios, NV04_PFB_CFG0, 0, mask);
2376 amount = bios_rd32(bios, NV04_PFB_FIFO_DATA);
2377 for (off = amount; off > 0x2000000; off -= 0x2000000)
2378 poke_fb(dev, fb, off - 4, off);
2380 amount = bios_rd32(bios, NV04_PFB_FIFO_DATA);
2381 if (amount != peek_fb(dev, fb, amount - 4))
2382 /* IC missing - disable the upper half memory space. */
2383 bios_md32(bios, NV04_PFB_CFG0, mask, 0);
2385 io_mapping_free(fb);
2390 init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2393 * INIT_COMPUTE_MEM opcode: 0x63 ('c')
2395 * offset (8 bit): opcode
2397 * This opcode is meant to set the PFB memory config registers
2398 * appropriately so that we can correctly calculate how much VRAM it
2399 * has (on nv10 and better chipsets the amount of installed VRAM is
2400 * subsequently reported in NV_PFB_CSTATUS (0x10020C)).
2402 * The implementation of this opcode in general consists of several
2405 * 1) Determination of memory type and density. Only necessary for
2406 * really old chipsets, the memory type reported by the strap bits
2407 * (0x101000) is assumed to be accurate on nv05 and newer.
2409 * 2) Determination of the memory bus width. Usually done by a cunning
2410 * combination of writes to offsets 0x1c and 0x3c in the fb, and
2411 * seeing whether the written values are read back correctly.
2413 * Only necessary on nv0x-nv1x and nv34, on the other cards we can
2416 * 3) Determination of how many of the card's RAM pads have ICs
2417 * attached, usually done by a cunning combination of writes to an
2418 * offset slightly less than the maximum memory reported by
2419 * NV_PFB_CSTATUS, then seeing if the test pattern can be read back.
2421 * This appears to be a NOP on IGPs and NV4x or newer chipsets, both io
2422 * logs of the VBIOS and kmmio traces of the binary driver POSTing the
2423 * card show nothing being done for this opcode. Why is it still listed
2427 /* no iexec->execute check by design */
2429 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
2432 if (dev_priv->chipset >= 0x40 ||
2433 dev_priv->chipset == 0x1a ||
2434 dev_priv->chipset == 0x1f)
2436 else if (dev_priv->chipset >= 0x20 &&
2437 dev_priv->chipset != 0x34)
2438 ret = nv20_init_compute_mem(bios);
2439 else if (dev_priv->chipset >= 0x10)
2440 ret = nv10_init_compute_mem(bios);
2441 else if (dev_priv->chipset >= 0x5)
2442 ret = nv05_init_compute_mem(bios);
2444 ret = nv04_init_compute_mem(bios);
2453 init_reset(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2456 * INIT_RESET opcode: 0x65 ('e')
2458 * offset (8 bit): opcode
2459 * offset + 1 (32 bit): register
2460 * offset + 5 (32 bit): value1
2461 * offset + 9 (32 bit): value2
2463 * Assign "value1" to "register", then assign "value2" to "register"
2466 uint32_t reg = ROM32(bios->data[offset + 1]);
2467 uint32_t value1 = ROM32(bios->data[offset + 5]);
2468 uint32_t value2 = ROM32(bios->data[offset + 9]);
2469 uint32_t pci_nv_19, pci_nv_20;
2471 /* no iexec->execute check by design */
2473 pci_nv_19 = bios_rd32(bios, NV_PBUS_PCI_NV_19);
2474 bios_wr32(bios, NV_PBUS_PCI_NV_19, pci_nv_19 & ~0xf00);
2476 bios_wr32(bios, reg, value1);
2480 bios_wr32(bios, reg, value2);
2481 bios_wr32(bios, NV_PBUS_PCI_NV_19, pci_nv_19);
2483 pci_nv_20 = bios_rd32(bios, NV_PBUS_PCI_NV_20);
2484 pci_nv_20 &= ~NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED; /* 0xfffffffe */
2485 bios_wr32(bios, NV_PBUS_PCI_NV_20, pci_nv_20);
2491 init_configure_mem(struct nvbios *bios, uint16_t offset,
2492 struct init_exec *iexec)
2495 * INIT_CONFIGURE_MEM opcode: 0x66 ('f')
2497 * offset (8 bit): opcode
2499 * Equivalent to INIT_DONE on bios version 3 or greater.
2500 * For early bios versions, sets up the memory registers, using values
2501 * taken from the memory init table
2504 /* no iexec->execute check by design */
2506 uint16_t meminitoffs = bios->legacy.mem_init_tbl_ptr + MEM_INIT_SIZE * (bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_SCRATCH4__INDEX) >> 4);
2507 uint16_t seqtbloffs = bios->legacy.sdr_seq_tbl_ptr, meminitdata = meminitoffs + 6;
2510 if (bios->major_version > 2)
2513 bios_idxprt_wr(bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX, bios_idxprt_rd(
2514 bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX) | 0x20);
2516 if (bios->data[meminitoffs] & 1)
2517 seqtbloffs = bios->legacy.ddr_seq_tbl_ptr;
2519 for (reg = ROM32(bios->data[seqtbloffs]);
2521 reg = ROM32(bios->data[seqtbloffs += 4])) {
2525 data = NV04_PFB_PRE_CMD_PRECHARGE;
2528 data = NV04_PFB_PAD_CKE_NORMAL;
2531 data = NV04_PFB_REF_CMD_REFRESH;
2534 data = ROM32(bios->data[meminitdata]);
2536 if (data == 0xffffffff)
2540 bios_wr32(bios, reg, data);
2547 init_configure_clk(struct nvbios *bios, uint16_t offset,
2548 struct init_exec *iexec)
2551 * INIT_CONFIGURE_CLK opcode: 0x67 ('g')
2553 * offset (8 bit): opcode
2555 * Equivalent to INIT_DONE on bios version 3 or greater.
2556 * For early bios versions, sets up the NVClk and MClk PLLs, using
2557 * values taken from the memory init table
2560 /* no iexec->execute check by design */
2562 uint16_t meminitoffs = bios->legacy.mem_init_tbl_ptr + MEM_INIT_SIZE * (bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_SCRATCH4__INDEX) >> 4);
2565 if (bios->major_version > 2)
2568 clock = ROM16(bios->data[meminitoffs + 4]) * 10;
2569 setPLL(bios, NV_PRAMDAC_NVPLL_COEFF, clock);
2571 clock = ROM16(bios->data[meminitoffs + 2]) * 10;
2572 if (bios->data[meminitoffs] & 1) /* DDR */
2574 setPLL(bios, NV_PRAMDAC_MPLL_COEFF, clock);
2580 init_configure_preinit(struct nvbios *bios, uint16_t offset,
2581 struct init_exec *iexec)
2584 * INIT_CONFIGURE_PREINIT opcode: 0x68 ('h')
2586 * offset (8 bit): opcode
2588 * Equivalent to INIT_DONE on bios version 3 or greater.
2589 * For early bios versions, does early init, loading ram and crystal
2590 * configuration from straps into CR3C
2593 /* no iexec->execute check by design */
2595 uint32_t straps = bios_rd32(bios, NV_PEXTDEV_BOOT_0);
2596 uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & (1 << 6));
2598 if (bios->major_version > 2)
2601 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR,
2602 NV_CIO_CRE_SCRATCH4__INDEX, cr3c);
2608 init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2611 * INIT_IO opcode: 0x69 ('i')
2613 * offset (8 bit): opcode
2614 * offset + 1 (16 bit): CRTC port
2615 * offset + 3 (8 bit): mask
2616 * offset + 4 (8 bit): data
2618 * Assign ((IOVAL("crtc port") & "mask") | "data") to "crtc port"
2621 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
2622 uint16_t crtcport = ROM16(bios->data[offset + 1]);
2623 uint8_t mask = bios->data[offset + 3];
2624 uint8_t data = bios->data[offset + 4];
2626 if (!iexec->execute)
2629 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Mask: 0x%02X, Data: 0x%02X\n",
2630 offset, crtcport, mask, data);
2633 * I have no idea what this does, but NVIDIA do this magic sequence
2634 * in the places where this INIT_IO happens..
2636 if (dev_priv->card_type >= NV_50 && crtcport == 0x3c3 && data == 1) {
2639 bios_wr32(bios, 0x614100, (bios_rd32(
2640 bios, 0x614100) & 0x0fffffff) | 0x00800000);
2642 bios_wr32(bios, 0x00e18c, bios_rd32(
2643 bios, 0x00e18c) | 0x00020000);
2645 bios_wr32(bios, 0x614900, (bios_rd32(
2646 bios, 0x614900) & 0x0fffffff) | 0x00800000);
2648 bios_wr32(bios, 0x000200, bios_rd32(
2649 bios, 0x000200) & ~0x40000000);
2653 bios_wr32(bios, 0x00e18c, bios_rd32(
2654 bios, 0x00e18c) & ~0x00020000);
2656 bios_wr32(bios, 0x000200, bios_rd32(
2657 bios, 0x000200) | 0x40000000);
2659 bios_wr32(bios, 0x614100, 0x00800018);
2660 bios_wr32(bios, 0x614900, 0x00800018);
2664 bios_wr32(bios, 0x614100, 0x10000018);
2665 bios_wr32(bios, 0x614900, 0x10000018);
2667 for (i = 0; i < 3; i++)
2668 bios_wr32(bios, 0x614280 + (i*0x800), bios_rd32(
2669 bios, 0x614280 + (i*0x800)) & 0xf0f0f0f0);
2671 for (i = 0; i < 2; i++)
2672 bios_wr32(bios, 0x614300 + (i*0x800), bios_rd32(
2673 bios, 0x614300 + (i*0x800)) & 0xfffff0f0);
2675 for (i = 0; i < 3; i++)
2676 bios_wr32(bios, 0x614380 + (i*0x800), bios_rd32(
2677 bios, 0x614380 + (i*0x800)) & 0xfffff0f0);
2679 for (i = 0; i < 2; i++)
2680 bios_wr32(bios, 0x614200 + (i*0x800), bios_rd32(
2681 bios, 0x614200 + (i*0x800)) & 0xfffffff0);
2683 for (i = 0; i < 2; i++)
2684 bios_wr32(bios, 0x614108 + (i*0x800), bios_rd32(
2685 bios, 0x614108 + (i*0x800)) & 0x0fffffff);
2689 bios_port_wr(bios, crtcport, (bios_port_rd(bios, crtcport) & mask) |
2695 init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2698 * INIT_SUB opcode: 0x6B ('k')
2700 * offset (8 bit): opcode
2701 * offset + 1 (8 bit): script number
2703 * Execute script number "script number", as a subroutine
2706 uint8_t sub = bios->data[offset + 1];
2708 if (!iexec->execute)
2711 BIOSLOG(bios, "0x%04X: Calling script %d\n", offset, sub);
2713 parse_init_table(bios,
2714 ROM16(bios->data[bios->init_script_tbls_ptr + sub * 2]),
2717 BIOSLOG(bios, "0x%04X: End of script %d\n", offset, sub);
2723 init_ram_condition(struct nvbios *bios, uint16_t offset,
2724 struct init_exec *iexec)
2727 * INIT_RAM_CONDITION opcode: 0x6D ('m')
2729 * offset (8 bit): opcode
2730 * offset + 1 (8 bit): mask
2731 * offset + 2 (8 bit): cmpval
2733 * Test if (NV04_PFB_BOOT_0 & "mask") equals "cmpval".
2734 * If condition not met skip subsequent opcodes until condition is
2735 * inverted (INIT_NOT), or we hit INIT_RESUME
2738 uint8_t mask = bios->data[offset + 1];
2739 uint8_t cmpval = bios->data[offset + 2];
2742 if (!iexec->execute)
2745 data = bios_rd32(bios, NV04_PFB_BOOT_0) & mask;
2747 BIOSLOG(bios, "0x%04X: Checking if 0x%08X equals 0x%08X\n",
2748 offset, data, cmpval);
2751 BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
2753 BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
2754 iexec->execute = false;
2761 init_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2764 * INIT_NV_REG opcode: 0x6E ('n')
2766 * offset (8 bit): opcode
2767 * offset + 1 (32 bit): register
2768 * offset + 5 (32 bit): mask
2769 * offset + 9 (32 bit): data
2771 * Assign ((REGVAL("register") & "mask") | "data") to "register"
2774 uint32_t reg = ROM32(bios->data[offset + 1]);
2775 uint32_t mask = ROM32(bios->data[offset + 5]);
2776 uint32_t data = ROM32(bios->data[offset + 9]);
2778 if (!iexec->execute)
2781 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Mask: 0x%08X, Data: 0x%08X\n",
2782 offset, reg, mask, data);
2784 bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | data);
2790 init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2793 * INIT_MACRO opcode: 0x6F ('o')
2795 * offset (8 bit): opcode
2796 * offset + 1 (8 bit): macro number
2798 * Look up macro index "macro number" in the macro index table.
2799 * The macro index table entry has 1 byte for the index in the macro
2800 * table, and 1 byte for the number of times to repeat the macro.
2801 * The macro table entry has 4 bytes for the register address and
2802 * 4 bytes for the value to write to that register
2805 uint8_t macro_index_tbl_idx = bios->data[offset + 1];
2806 uint16_t tmp = bios->macro_index_tbl_ptr + (macro_index_tbl_idx * MACRO_INDEX_SIZE);
2807 uint8_t macro_tbl_idx = bios->data[tmp];
2808 uint8_t count = bios->data[tmp + 1];
2812 if (!iexec->execute)
2815 BIOSLOG(bios, "0x%04X: Macro: 0x%02X, MacroTableIndex: 0x%02X, "
2817 offset, macro_index_tbl_idx, macro_tbl_idx, count);
2819 for (i = 0; i < count; i++) {
2820 uint16_t macroentryptr = bios->macro_tbl_ptr + (macro_tbl_idx + i) * MACRO_SIZE;
2822 reg = ROM32(bios->data[macroentryptr]);
2823 data = ROM32(bios->data[macroentryptr + 4]);
2825 bios_wr32(bios, reg, data);
2832 init_done(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2835 * INIT_DONE opcode: 0x71 ('q')
2837 * offset (8 bit): opcode
2839 * End the current script
2842 /* mild retval abuse to stop parsing this table */
2847 init_resume(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2850 * INIT_RESUME opcode: 0x72 ('r')
2852 * offset (8 bit): opcode
2854 * End the current execute / no-execute condition
2860 iexec->execute = true;
2861 BIOSLOG(bios, "0x%04X: ---- Executing following commands ----\n", offset);
2867 init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2870 * INIT_TIME opcode: 0x74 ('t')
2872 * offset (8 bit): opcode
2873 * offset + 1 (16 bit): time
2875 * Sleep for "time" microseconds.
2878 unsigned time = ROM16(bios->data[offset + 1]);
2880 if (!iexec->execute)
2883 BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X microseconds\n",
2889 msleep((time + 900) / 1000);
2895 init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2898 * INIT_CONDITION opcode: 0x75 ('u')
2900 * offset (8 bit): opcode
2901 * offset + 1 (8 bit): condition number
2903 * Check condition "condition number" in the condition table.
2904 * If condition not met skip subsequent opcodes until condition is
2905 * inverted (INIT_NOT), or we hit INIT_RESUME
2908 uint8_t cond = bios->data[offset + 1];
2910 if (!iexec->execute)
2913 BIOSLOG(bios, "0x%04X: Condition: 0x%02X\n", offset, cond);
2915 if (bios_condition_met(bios, offset, cond))
2916 BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
2918 BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
2919 iexec->execute = false;
2926 init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2929 * INIT_IO_CONDITION opcode: 0x76
2931 * offset (8 bit): opcode
2932 * offset + 1 (8 bit): condition number
2934 * Check condition "condition number" in the io condition table.
2935 * If condition not met skip subsequent opcodes until condition is
2936 * inverted (INIT_NOT), or we hit INIT_RESUME
2939 uint8_t cond = bios->data[offset + 1];
2941 if (!iexec->execute)
2944 BIOSLOG(bios, "0x%04X: IO condition: 0x%02X\n", offset, cond);
2946 if (io_condition_met(bios, offset, cond))
2947 BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
2949 BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
2950 iexec->execute = false;
2957 init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2960 * INIT_INDEX_IO opcode: 0x78 ('x')
2962 * offset (8 bit): opcode
2963 * offset + 1 (16 bit): CRTC port
2964 * offset + 3 (8 bit): CRTC index
2965 * offset + 4 (8 bit): mask
2966 * offset + 5 (8 bit): data
2968 * Read value at index "CRTC index" on "CRTC port", AND with "mask",
2969 * OR with "data", write-back
2972 uint16_t crtcport = ROM16(bios->data[offset + 1]);
2973 uint8_t crtcindex = bios->data[offset + 3];
2974 uint8_t mask = bios->data[offset + 4];
2975 uint8_t data = bios->data[offset + 5];
2978 if (!iexec->execute)
2981 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
2983 offset, crtcport, crtcindex, mask, data);
2985 value = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) | data;
2986 bios_idxprt_wr(bios, crtcport, crtcindex, value);
2992 init_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2995 * INIT_PLL opcode: 0x79 ('y')
2997 * offset (8 bit): opcode
2998 * offset + 1 (32 bit): register
2999 * offset + 5 (16 bit): freq
3001 * Set PLL register "register" to coefficients for frequency (10kHz)
3005 uint32_t reg = ROM32(bios->data[offset + 1]);
3006 uint16_t freq = ROM16(bios->data[offset + 5]);
3008 if (!iexec->execute)
3011 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Freq: %d0kHz\n", offset, reg, freq);
3013 setPLL(bios, reg, freq * 10);
3019 init_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3022 * INIT_ZM_REG opcode: 0x7A ('z')
3024 * offset (8 bit): opcode
3025 * offset + 1 (32 bit): register
3026 * offset + 5 (32 bit): value
3028 * Assign "value" to "register"
3031 uint32_t reg = ROM32(bios->data[offset + 1]);
3032 uint32_t value = ROM32(bios->data[offset + 5]);
3034 if (!iexec->execute)
3037 if (reg == 0x000200)
3040 bios_wr32(bios, reg, value);
3046 init_ram_restrict_pll(struct nvbios *bios, uint16_t offset,
3047 struct init_exec *iexec)
3050 * INIT_RAM_RESTRICT_PLL opcode: 0x87 ('')
3052 * offset (8 bit): opcode
3053 * offset + 1 (8 bit): PLL type
3054 * offset + 2 (32 bit): frequency 0
3056 * Uses the RAMCFG strap of PEXTDEV_BOOT as an index into the table at
3057 * ram_restrict_table_ptr. The value read from there is used to select
3058 * a frequency from the table starting at 'frequency 0' to be
3059 * programmed into the PLL corresponding to 'type'.
3061 * The PLL limits table on cards using this opcode has a mapping of
3062 * 'type' to the relevant registers.
3065 struct drm_device *dev = bios->dev;
3066 uint32_t strap = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) & 0x0000003c) >> 2;
3067 uint8_t index = bios->data[bios->ram_restrict_tbl_ptr + strap];
3068 uint8_t type = bios->data[offset + 1];
3069 uint32_t freq = ROM32(bios->data[offset + 2 + (index * 4)]);
3070 uint8_t *pll_limits = &bios->data[bios->pll_limit_tbl_ptr], *entry;
3071 int len = 2 + bios->ram_restrict_group_count * 4;
3074 if (!iexec->execute)
3077 if (!bios->pll_limit_tbl_ptr || (pll_limits[0] & 0xf0) != 0x30) {
3078 NV_ERROR(dev, "PLL limits table not version 3.x\n");
3079 return len; /* deliberate, allow default clocks to remain */
3082 entry = pll_limits + pll_limits[1];
3083 for (i = 0; i < pll_limits[3]; i++, entry += pll_limits[2]) {
3084 if (entry[0] == type) {
3085 uint32_t reg = ROM32(entry[3]);
3087 BIOSLOG(bios, "0x%04X: "
3088 "Type %02x Reg 0x%08x Freq %dKHz\n",
3089 offset, type, reg, freq);
3091 setPLL(bios, reg, freq);
3096 NV_ERROR(dev, "PLL type 0x%02x not found in PLL limits table", type);
3101 init_8c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3104 * INIT_8C opcode: 0x8C ('')
3114 init_8d(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3117 * INIT_8D opcode: 0x8D ('')
3127 init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3130 * INIT_GPIO opcode: 0x8E ('')
3132 * offset (8 bit): opcode
3134 * Loop over all entries in the DCB GPIO table, and initialise
3135 * each GPIO according to various values listed in each entry
3138 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
3139 const uint32_t nv50_gpio_ctl[2] = { 0xe100, 0xe28c };
3142 if (dev_priv->card_type != NV_50) {
3143 NV_ERROR(bios->dev, "INIT_GPIO on unsupported chipset\n");
3147 if (!iexec->execute)
3150 for (i = 0; i < bios->dcb.gpio.entries; i++) {
3151 struct dcb_gpio_entry *gpio = &bios->dcb.gpio.entry[i];
3154 BIOSLOG(bios, "0x%04X: Entry: 0x%08X\n", offset, gpio->entry);
3156 BIOSLOG(bios, "0x%04X: set gpio 0x%02x, state %d\n",
3157 offset, gpio->tag, gpio->state_default);
3159 nv50_gpio_set(bios->dev, gpio->tag, gpio->state_default);
3161 /* The NVIDIA binary driver doesn't appear to actually do
3162 * any of this, my VBIOS does however.
3164 /* Not a clue, needs de-magicing */
3165 r = nv50_gpio_ctl[gpio->line >> 4];
3166 s = (gpio->line & 0x0f);
3167 v = bios_rd32(bios, r) & ~(0x00010001 << s);
3168 switch ((gpio->entry & 0x06000000) >> 25) {
3170 v |= (0x00000001 << s);
3173 v |= (0x00010000 << s);
3178 bios_wr32(bios, r, v);
3185 init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset,
3186 struct init_exec *iexec)
3189 * INIT_RAM_RESTRICT_ZM_REG_GROUP opcode: 0x8F ('')
3191 * offset (8 bit): opcode
3192 * offset + 1 (32 bit): reg
3193 * offset + 5 (8 bit): regincrement
3194 * offset + 6 (8 bit): count
3195 * offset + 7 (32 bit): value 1,1
3198 * Use the RAMCFG strap of PEXTDEV_BOOT as an index into the table at
3199 * ram_restrict_table_ptr. The value read from here is 'n', and
3200 * "value 1,n" gets written to "reg". This repeats "count" times and on
3201 * each iteration 'm', "reg" increases by "regincrement" and
3202 * "value m,n" is used. The extent of n is limited by a number read
3203 * from the 'M' BIT table, herein called "blocklen"
3206 uint32_t reg = ROM32(bios->data[offset + 1]);
3207 uint8_t regincrement = bios->data[offset + 5];
3208 uint8_t count = bios->data[offset + 6];
3209 uint32_t strap_ramcfg, data;
3210 /* previously set by 'M' BIT table */
3211 uint16_t blocklen = bios->ram_restrict_group_count * 4;
3212 int len = 7 + count * blocklen;
3216 /* critical! to know the length of the opcode */;
3219 "0x%04X: Zero block length - has the M table "
3220 "been parsed?\n", offset);
3224 if (!iexec->execute)
3227 strap_ramcfg = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 2) & 0xf;
3228 index = bios->data[bios->ram_restrict_tbl_ptr + strap_ramcfg];
3230 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, RegIncrement: 0x%02X, "
3231 "Count: 0x%02X, StrapRamCfg: 0x%02X, Index: 0x%02X\n",
3232 offset, reg, regincrement, count, strap_ramcfg, index);
3234 for (i = 0; i < count; i++) {
3235 data = ROM32(bios->data[offset + 7 + index * 4 + blocklen * i]);
3237 bios_wr32(bios, reg, data);
3239 reg += regincrement;
3246 init_copy_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3249 * INIT_COPY_ZM_REG opcode: 0x90 ('')
3251 * offset (8 bit): opcode
3252 * offset + 1 (32 bit): src reg
3253 * offset + 5 (32 bit): dst reg
3255 * Put contents of "src reg" into "dst reg"
3258 uint32_t srcreg = ROM32(bios->data[offset + 1]);
3259 uint32_t dstreg = ROM32(bios->data[offset + 5]);
3261 if (!iexec->execute)
3264 bios_wr32(bios, dstreg, bios_rd32(bios, srcreg));
3270 init_zm_reg_group_addr_latched(struct nvbios *bios, uint16_t offset,
3271 struct init_exec *iexec)
3274 * INIT_ZM_REG_GROUP_ADDRESS_LATCHED opcode: 0x91 ('')
3276 * offset (8 bit): opcode
3277 * offset + 1 (32 bit): dst reg
3278 * offset + 5 (8 bit): count
3279 * offset + 6 (32 bit): data 1
3282 * For each of "count" values write "data n" to "dst reg"
3285 uint32_t reg = ROM32(bios->data[offset + 1]);
3286 uint8_t count = bios->data[offset + 5];
3287 int len = 6 + count * 4;
3290 if (!iexec->execute)
3293 for (i = 0; i < count; i++) {
3294 uint32_t data = ROM32(bios->data[offset + 6 + 4 * i]);
3295 bios_wr32(bios, reg, data);
3302 init_reserved(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3305 * INIT_RESERVED opcode: 0x92 ('')
3307 * offset (8 bit): opcode
3309 * Seemingly does nothing
3316 init_96(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3319 * INIT_96 opcode: 0x96 ('')
3321 * offset (8 bit): opcode
3322 * offset + 1 (32 bit): sreg
3323 * offset + 5 (8 bit): sshift
3324 * offset + 6 (8 bit): smask
3325 * offset + 7 (8 bit): index
3326 * offset + 8 (32 bit): reg
3327 * offset + 12 (32 bit): mask
3328 * offset + 16 (8 bit): shift
3332 uint16_t xlatptr = bios->init96_tbl_ptr + (bios->data[offset + 7] * 2);
3333 uint32_t reg = ROM32(bios->data[offset + 8]);
3334 uint32_t mask = ROM32(bios->data[offset + 12]);
3337 val = bios_rd32(bios, ROM32(bios->data[offset + 1]));
3338 if (bios->data[offset + 5] < 0x80)
3339 val >>= bios->data[offset + 5];
3341 val <<= (0x100 - bios->data[offset + 5]);
3342 val &= bios->data[offset + 6];
3344 val = bios->data[ROM16(bios->data[xlatptr]) + val];
3345 val <<= bios->data[offset + 16];
3347 if (!iexec->execute)
3350 bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | val);
3355 init_97(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3358 * INIT_97 opcode: 0x97 ('')
3360 * offset (8 bit): opcode
3361 * offset + 1 (32 bit): register
3362 * offset + 5 (32 bit): mask
3363 * offset + 9 (32 bit): value
3365 * Adds "value" to "register" preserving the fields specified
3369 uint32_t reg = ROM32(bios->data[offset + 1]);
3370 uint32_t mask = ROM32(bios->data[offset + 5]);
3371 uint32_t add = ROM32(bios->data[offset + 9]);
3374 val = bios_rd32(bios, reg);
3375 val = (val & mask) | ((val + add) & ~mask);
3377 if (!iexec->execute)
3380 bios_wr32(bios, reg, val);
3385 init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3388 * INIT_AUXCH opcode: 0x98 ('')
3390 * offset (8 bit): opcode
3391 * offset + 1 (32 bit): address
3392 * offset + 5 (8 bit): count
3393 * offset + 6 (8 bit): mask 0
3394 * offset + 7 (8 bit): data 0
3399 struct drm_device *dev = bios->dev;
3400 struct nouveau_i2c_chan *auxch;
3401 uint32_t addr = ROM32(bios->data[offset + 1]);
3402 uint8_t count = bios->data[offset + 5];
3403 int len = 6 + count * 2;
3406 if (!bios->display.output) {
3407 NV_ERROR(dev, "INIT_AUXCH: no active output\n");
3411 auxch = init_i2c_device_find(dev, bios->display.output->i2c_index);
3413 NV_ERROR(dev, "INIT_AUXCH: couldn't get auxch %d\n",
3414 bios->display.output->i2c_index);
3418 if (!iexec->execute)
3422 for (i = 0; i < count; i++, offset += 2) {
3425 ret = nouveau_dp_auxch(auxch, 9, addr, &data, 1);
3427 NV_ERROR(dev, "INIT_AUXCH: rd auxch fail %d\n", ret);
3431 data &= bios->data[offset + 0];
3432 data |= bios->data[offset + 1];
3434 ret = nouveau_dp_auxch(auxch, 8, addr, &data, 1);
3436 NV_ERROR(dev, "INIT_AUXCH: wr auxch fail %d\n", ret);
3445 init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3448 * INIT_ZM_AUXCH opcode: 0x99 ('')
3450 * offset (8 bit): opcode
3451 * offset + 1 (32 bit): address
3452 * offset + 5 (8 bit): count
3453 * offset + 6 (8 bit): data 0
3458 struct drm_device *dev = bios->dev;
3459 struct nouveau_i2c_chan *auxch;
3460 uint32_t addr = ROM32(bios->data[offset + 1]);
3461 uint8_t count = bios->data[offset + 5];
3462 int len = 6 + count;
3465 if (!bios->display.output) {
3466 NV_ERROR(dev, "INIT_ZM_AUXCH: no active output\n");
3470 auxch = init_i2c_device_find(dev, bios->display.output->i2c_index);
3472 NV_ERROR(dev, "INIT_ZM_AUXCH: couldn't get auxch %d\n",
3473 bios->display.output->i2c_index);
3477 if (!iexec->execute)
3481 for (i = 0; i < count; i++, offset++) {
3482 ret = nouveau_dp_auxch(auxch, 8, addr, &bios->data[offset], 1);
3484 NV_ERROR(dev, "INIT_ZM_AUXCH: wr auxch fail %d\n", ret);
3492 static struct init_tbl_entry itbl_entry[] = {
3493 /* command name , id , length , offset , mult , command handler */
3494 /* INIT_PROG (0x31, 15, 10, 4) removed due to no example of use */
3495 { "INIT_IO_RESTRICT_PROG" , 0x32, init_io_restrict_prog },
3496 { "INIT_REPEAT" , 0x33, init_repeat },
3497 { "INIT_IO_RESTRICT_PLL" , 0x34, init_io_restrict_pll },
3498 { "INIT_END_REPEAT" , 0x36, init_end_repeat },
3499 { "INIT_COPY" , 0x37, init_copy },
3500 { "INIT_NOT" , 0x38, init_not },
3501 { "INIT_IO_FLAG_CONDITION" , 0x39, init_io_flag_condition },
3502 { "INIT_DP_CONDITION" , 0x3A, init_dp_condition },
3503 { "INIT_OP_3B" , 0x3B, init_op_3b },
3504 { "INIT_OP_3C" , 0x3C, init_op_3c },
3505 { "INIT_INDEX_ADDRESS_LATCHED" , 0x49, init_idx_addr_latched },
3506 { "INIT_IO_RESTRICT_PLL2" , 0x4A, init_io_restrict_pll2 },
3507 { "INIT_PLL2" , 0x4B, init_pll2 },
3508 { "INIT_I2C_BYTE" , 0x4C, init_i2c_byte },
3509 { "INIT_ZM_I2C_BYTE" , 0x4D, init_zm_i2c_byte },
3510 { "INIT_ZM_I2C" , 0x4E, init_zm_i2c },
3511 { "INIT_TMDS" , 0x4F, init_tmds },
3512 { "INIT_ZM_TMDS_GROUP" , 0x50, init_zm_tmds_group },
3513 { "INIT_CR_INDEX_ADDRESS_LATCHED" , 0x51, init_cr_idx_adr_latch },
3514 { "INIT_CR" , 0x52, init_cr },
3515 { "INIT_ZM_CR" , 0x53, init_zm_cr },
3516 { "INIT_ZM_CR_GROUP" , 0x54, init_zm_cr_group },
3517 { "INIT_CONDITION_TIME" , 0x56, init_condition_time },
3518 { "INIT_ZM_REG_SEQUENCE" , 0x58, init_zm_reg_sequence },
3519 /* INIT_INDIRECT_REG (0x5A, 7, 0, 0) removed due to no example of use */
3520 { "INIT_SUB_DIRECT" , 0x5B, init_sub_direct },
3521 { "INIT_COPY_NV_REG" , 0x5F, init_copy_nv_reg },
3522 { "INIT_ZM_INDEX_IO" , 0x62, init_zm_index_io },
3523 { "INIT_COMPUTE_MEM" , 0x63, init_compute_mem },
3524 { "INIT_RESET" , 0x65, init_reset },
3525 { "INIT_CONFIGURE_MEM" , 0x66, init_configure_mem },
3526 { "INIT_CONFIGURE_CLK" , 0x67, init_configure_clk },
3527 { "INIT_CONFIGURE_PREINIT" , 0x68, init_configure_preinit },
3528 { "INIT_IO" , 0x69, init_io },
3529 { "INIT_SUB" , 0x6B, init_sub },
3530 { "INIT_RAM_CONDITION" , 0x6D, init_ram_condition },
3531 { "INIT_NV_REG" , 0x6E, init_nv_reg },
3532 { "INIT_MACRO" , 0x6F, init_macro },
3533 { "INIT_DONE" , 0x71, init_done },
3534 { "INIT_RESUME" , 0x72, init_resume },
3535 /* INIT_RAM_CONDITION2 (0x73, 9, 0, 0) removed due to no example of use */
3536 { "INIT_TIME" , 0x74, init_time },
3537 { "INIT_CONDITION" , 0x75, init_condition },
3538 { "INIT_IO_CONDITION" , 0x76, init_io_condition },
3539 { "INIT_INDEX_IO" , 0x78, init_index_io },
3540 { "INIT_PLL" , 0x79, init_pll },
3541 { "INIT_ZM_REG" , 0x7A, init_zm_reg },
3542 { "INIT_RAM_RESTRICT_PLL" , 0x87, init_ram_restrict_pll },
3543 { "INIT_8C" , 0x8C, init_8c },
3544 { "INIT_8D" , 0x8D, init_8d },
3545 { "INIT_GPIO" , 0x8E, init_gpio },
3546 { "INIT_RAM_RESTRICT_ZM_REG_GROUP" , 0x8F, init_ram_restrict_zm_reg_group },
3547 { "INIT_COPY_ZM_REG" , 0x90, init_copy_zm_reg },
3548 { "INIT_ZM_REG_GROUP_ADDRESS_LATCHED" , 0x91, init_zm_reg_group_addr_latched },
3549 { "INIT_RESERVED" , 0x92, init_reserved },
3550 { "INIT_96" , 0x96, init_96 },
3551 { "INIT_97" , 0x97, init_97 },
3552 { "INIT_AUXCH" , 0x98, init_auxch },
3553 { "INIT_ZM_AUXCH" , 0x99, init_zm_auxch },
3557 #define MAX_TABLE_OPS 1000
3560 parse_init_table(struct nvbios *bios, unsigned int offset,
3561 struct init_exec *iexec)
3564 * Parses all commands in an init table.
3566 * We start out executing all commands found in the init table. Some
3567 * opcodes may change the status of iexec->execute to SKIP, which will
3568 * cause the following opcodes to perform no operation until the value
3569 * is changed back to EXECUTE.
3572 int count = 0, i, ret;
3576 * Loop until INIT_DONE causes us to break out of the loop
3577 * (or until offset > bios length just in case... )
3578 * (and no more than MAX_TABLE_OPS iterations, just in case... )
3580 while ((offset < bios->length) && (count++ < MAX_TABLE_OPS)) {
3581 id = bios->data[offset];
3583 /* Find matching id in itbl_entry */
3584 for (i = 0; itbl_entry[i].name && (itbl_entry[i].id != id); i++)
3587 if (!itbl_entry[i].name) {
3589 "0x%04X: Init table command not found: "
3590 "0x%02X\n", offset, id);
3594 BIOSLOG(bios, "0x%04X: [ (0x%02X) - %s ]\n", offset,
3595 itbl_entry[i].id, itbl_entry[i].name);
3597 /* execute eventual command handler */
3598 ret = (*itbl_entry[i].handler)(bios, offset, iexec);
3600 NV_ERROR(bios->dev, "0x%04X: Failed parsing init "
3601 "table opcode: %s %d\n", offset,
3602 itbl_entry[i].name, ret);
3609 * Add the offset of the current command including all data
3610 * of that command. The offset will then be pointing on the
3616 if (offset >= bios->length)
3618 "Offset 0x%04X greater than known bios image length. "
3619 "Corrupt image?\n", offset);
3620 if (count >= MAX_TABLE_OPS)
3622 "More than %d opcodes to a table is unlikely, "
3623 "is the bios image corrupt?\n", MAX_TABLE_OPS);
3629 parse_init_tables(struct nvbios *bios)
3631 /* Loops and calls parse_init_table() for each present table. */
3635 struct init_exec iexec = {true, false};
3637 if (bios->old_style_init) {
3638 if (bios->init_script_tbls_ptr)
3639 parse_init_table(bios, bios->init_script_tbls_ptr, &iexec);
3640 if (bios->extra_init_script_tbl_ptr)
3641 parse_init_table(bios, bios->extra_init_script_tbl_ptr, &iexec);
3646 while ((table = ROM16(bios->data[bios->init_script_tbls_ptr + i]))) {
3648 "Parsing VBIOS init table %d at offset 0x%04X\n",
3650 BIOSLOG(bios, "0x%04X: ------ Executing following commands ------\n", table);
3652 parse_init_table(bios, table, &iexec);
3657 static uint16_t clkcmptable(struct nvbios *bios, uint16_t clktable, int pxclk)
3659 int compare_record_len, i = 0;
3660 uint16_t compareclk, scriptptr = 0;
3662 if (bios->major_version < 5) /* pre BIT */
3663 compare_record_len = 3;
3665 compare_record_len = 4;
3668 compareclk = ROM16(bios->data[clktable + compare_record_len * i]);
3669 if (pxclk >= compareclk * 10) {
3670 if (bios->major_version < 5) {
3671 uint8_t tmdssub = bios->data[clktable + 2 + compare_record_len * i];
3672 scriptptr = ROM16(bios->data[bios->init_script_tbls_ptr + tmdssub * 2]);
3674 scriptptr = ROM16(bios->data[clktable + 2 + compare_record_len * i]);
3678 } while (compareclk);
3684 run_digital_op_script(struct drm_device *dev, uint16_t scriptptr,
3685 struct dcb_entry *dcbent, int head, bool dl)
3687 struct drm_nouveau_private *dev_priv = dev->dev_private;
3688 struct nvbios *bios = &dev_priv->vbios;
3689 struct init_exec iexec = {true, false};
3691 NV_TRACE(dev, "0x%04X: Parsing digital output script table\n",
3693 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_44,
3694 head ? NV_CIO_CRE_44_HEADB : NV_CIO_CRE_44_HEADA);
3695 /* note: if dcb entries have been merged, index may be misleading */
3696 NVWriteVgaCrtc5758(dev, head, 0, dcbent->index);
3697 parse_init_table(bios, scriptptr, &iexec);
3699 nv04_dfp_bind_head(dev, dcbent, head, dl);
3702 static int call_lvds_manufacturer_script(struct drm_device *dev, struct dcb_entry *dcbent, int head, enum LVDS_script script)
3704 struct drm_nouveau_private *dev_priv = dev->dev_private;
3705 struct nvbios *bios = &dev_priv->vbios;
3706 uint8_t sub = bios->data[bios->fp.xlated_entry + script] + (bios->fp.link_c_increment && dcbent->or & OUTPUT_C ? 1 : 0);
3707 uint16_t scriptofs = ROM16(bios->data[bios->init_script_tbls_ptr + sub * 2]);
3709 if (!bios->fp.xlated_entry || !sub || !scriptofs)
3712 run_digital_op_script(dev, scriptofs, dcbent, head, bios->fp.dual_link);
3714 if (script == LVDS_PANEL_OFF) {
3715 /* off-on delay in ms */
3716 msleep(ROM16(bios->data[bios->fp.xlated_entry + 7]));
3719 /* Powerbook specific quirks */
3720 if ((dev->pci_device & 0xffff) == 0x0179 ||
3721 (dev->pci_device & 0xffff) == 0x0189 ||
3722 (dev->pci_device & 0xffff) == 0x0329) {
3723 if (script == LVDS_RESET) {
3724 nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
3726 } else if (script == LVDS_PANEL_ON) {
3727 bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
3728 bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
3730 bios_wr32(bios, NV_PCRTC_GPIO_EXT,
3731 bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
3733 } else if (script == LVDS_PANEL_OFF) {
3734 bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
3735 bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
3737 bios_wr32(bios, NV_PCRTC_GPIO_EXT,
3738 bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
3746 static int run_lvds_table(struct drm_device *dev, struct dcb_entry *dcbent, int head, enum LVDS_script script, int pxclk)
3749 * The BIT LVDS table's header has the information to setup the
3750 * necessary registers. Following the standard 4 byte header are:
3751 * A bitmask byte and a dual-link transition pxclk value for use in
3752 * selecting the init script when not using straps; 4 script pointers
3753 * for panel power, selected by output and on/off; and 8 table pointers
3754 * for panel init, the needed one determined by output, and bits in the
3755 * conf byte. These tables are similar to the TMDS tables, consisting
3756 * of a list of pxclks and script pointers.
3758 struct drm_nouveau_private *dev_priv = dev->dev_private;
3759 struct nvbios *bios = &dev_priv->vbios;
3760 unsigned int outputset = (dcbent->or == 4) ? 1 : 0;
3761 uint16_t scriptptr = 0, clktable;
3764 * For now we assume version 3.0 table - g80 support will need some
3771 case LVDS_BACKLIGHT_ON:
3773 scriptptr = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 7 + outputset * 2]);
3775 case LVDS_BACKLIGHT_OFF:
3776 case LVDS_PANEL_OFF:
3777 scriptptr = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 11 + outputset * 2]);
3780 clktable = bios->fp.lvdsmanufacturerpointer + 15;
3781 if (dcbent->or == 4)
3784 if (dcbent->lvdsconf.use_straps_for_mode) {
3785 if (bios->fp.dual_link)
3787 if (bios->fp.if_is_24bit)
3791 int cmpval_24bit = (dcbent->or == 4) ? 4 : 1;
3793 if (bios->fp.dual_link) {
3798 if (bios->fp.strapless_is_24bit & cmpval_24bit)
3802 clktable = ROM16(bios->data[clktable]);
3804 NV_ERROR(dev, "Pixel clock comparison table not found\n");
3807 scriptptr = clkcmptable(bios, clktable, pxclk);
3811 NV_ERROR(dev, "LVDS output init script not found\n");
3814 run_digital_op_script(dev, scriptptr, dcbent, head, bios->fp.dual_link);
3819 int call_lvds_script(struct drm_device *dev, struct dcb_entry *dcbent, int head, enum LVDS_script script, int pxclk)
3822 * LVDS operations are multiplexed in an effort to present a single API
3823 * which works with two vastly differing underlying structures.
3824 * This acts as the demux
3827 struct drm_nouveau_private *dev_priv = dev->dev_private;
3828 struct nvbios *bios = &dev_priv->vbios;
3829 uint8_t lvds_ver = bios->data[bios->fp.lvdsmanufacturerpointer];
3830 uint32_t sel_clk_binding, sel_clk;
3833 if (bios->fp.last_script_invoc == (script << 1 | head) || !lvds_ver ||
3834 (lvds_ver >= 0x30 && script == LVDS_INIT))
3837 if (!bios->fp.lvds_init_run) {
3838 bios->fp.lvds_init_run = true;
3839 call_lvds_script(dev, dcbent, head, LVDS_INIT, pxclk);
3842 if (script == LVDS_PANEL_ON && bios->fp.reset_after_pclk_change)
3843 call_lvds_script(dev, dcbent, head, LVDS_RESET, pxclk);
3844 if (script == LVDS_RESET && bios->fp.power_off_for_reset)
3845 call_lvds_script(dev, dcbent, head, LVDS_PANEL_OFF, pxclk);
3847 NV_TRACE(dev, "Calling LVDS script %d:\n", script);
3849 /* don't let script change pll->head binding */
3850 sel_clk_binding = bios_rd32(bios, NV_PRAMDAC_SEL_CLK) & 0x50000;
3852 if (lvds_ver < 0x30)
3853 ret = call_lvds_manufacturer_script(dev, dcbent, head, script);
3855 ret = run_lvds_table(dev, dcbent, head, script, pxclk);
3857 bios->fp.last_script_invoc = (script << 1 | head);
3859 sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK) & ~0x50000;
3860 NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, sel_clk | sel_clk_binding);
3861 /* some scripts set a value in NV_PBUS_POWERCTRL_2 and break video overlay */
3862 nvWriteMC(dev, NV_PBUS_POWERCTRL_2, 0);
3867 struct lvdstableheader {
3868 uint8_t lvds_ver, headerlen, recordlen;
3871 static int parse_lvds_manufacturer_table_header(struct drm_device *dev, struct nvbios *bios, struct lvdstableheader *lth)
3874 * BMP version (0xa) LVDS table has a simple header of version and
3875 * record length. The BIT LVDS table has the typical BIT table header:
3876 * version byte, header length byte, record length byte, and a byte for
3877 * the maximum number of records that can be held in the table.
3880 uint8_t lvds_ver, headerlen, recordlen;
3882 memset(lth, 0, sizeof(struct lvdstableheader));
3884 if (bios->fp.lvdsmanufacturerpointer == 0x0) {
3885 NV_ERROR(dev, "Pointer to LVDS manufacturer table invalid\n");
3889 lvds_ver = bios->data[bios->fp.lvdsmanufacturerpointer];
3892 case 0x0a: /* pre NV40 */
3894 recordlen = bios->data[bios->fp.lvdsmanufacturerpointer + 1];
3896 case 0x30: /* NV4x */
3897 headerlen = bios->data[bios->fp.lvdsmanufacturerpointer + 1];
3898 if (headerlen < 0x1f) {
3899 NV_ERROR(dev, "LVDS table header not understood\n");
3902 recordlen = bios->data[bios->fp.lvdsmanufacturerpointer + 2];
3904 case 0x40: /* G80/G90 */
3905 headerlen = bios->data[bios->fp.lvdsmanufacturerpointer + 1];
3906 if (headerlen < 0x7) {
3907 NV_ERROR(dev, "LVDS table header not understood\n");
3910 recordlen = bios->data[bios->fp.lvdsmanufacturerpointer + 2];
3914 "LVDS table revision %d.%d not currently supported\n",
3915 lvds_ver >> 4, lvds_ver & 0xf);
3919 lth->lvds_ver = lvds_ver;
3920 lth->headerlen = headerlen;
3921 lth->recordlen = recordlen;
3927 get_fp_strap(struct drm_device *dev, struct nvbios *bios)
3929 struct drm_nouveau_private *dev_priv = dev->dev_private;
3932 * The fp strap is normally dictated by the "User Strap" in
3933 * PEXTDEV_BOOT_0[20:16], but on BMP cards when bit 2 of the
3934 * Internal_Flags struct at 0x48 is set, the user strap gets overriden
3935 * by the PCI subsystem ID during POST, but not before the previous user
3936 * strap has been committed to CR58 for CR57=0xf on head A, which may be
3937 * read and used instead
3940 if (bios->major_version < 5 && bios->data[0x48] & 0x4)
3941 return NVReadVgaCrtc5758(dev, 0, 0xf) & 0xf;
3943 if (dev_priv->card_type >= NV_50)
3944 return (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 24) & 0xf;
3946 return (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 16) & 0xf;
3949 static int parse_fp_mode_table(struct drm_device *dev, struct nvbios *bios)
3952 uint8_t fptable_ver, headerlen = 0, recordlen, fpentries = 0xf, fpindex;
3953 int ret, ofs, fpstrapping;
3954 struct lvdstableheader lth;
3956 if (bios->fp.fptablepointer == 0x0) {
3957 /* Apple cards don't have the fp table; the laptops use DDC */
3958 /* The table is also missing on some x86 IGPs */
3960 NV_ERROR(dev, "Pointer to flat panel table invalid\n");
3962 bios->digital_min_front_porch = 0x4b;
3966 fptable = &bios->data[bios->fp.fptablepointer];
3967 fptable_ver = fptable[0];
3969 switch (fptable_ver) {
3971 * BMP version 0x5.0x11 BIOSen have version 1 like tables, but no
3972 * version field, and miss one of the spread spectrum/PWM bytes.
3973 * This could affect early GF2Go parts (not seen any appropriate ROMs
3974 * though). Here we assume that a version of 0x05 matches this case
3975 * (combining with a BMP version check would be better), as the
3976 * common case for the panel type field is 0x0005, and that is in
3977 * fact what we are reading the first byte of.
3979 case 0x05: /* some NV10, 11, 15, 16 */
3983 case 0x10: /* some NV15/16, and NV11+ */
3987 case 0x20: /* NV40+ */
3988 headerlen = fptable[1];
3989 recordlen = fptable[2];
3990 fpentries = fptable[3];
3992 * fptable[4] is the minimum
3993 * RAMDAC_FP_HCRTC -> RAMDAC_FP_HSYNC_START gap
3995 bios->digital_min_front_porch = fptable[4];
4000 "FP table revision %d.%d not currently supported\n",
4001 fptable_ver >> 4, fptable_ver & 0xf);
4005 if (!bios->is_mobile) /* !mobile only needs digital_min_front_porch */
4008 ret = parse_lvds_manufacturer_table_header(dev, bios, <h);
4012 if (lth.lvds_ver == 0x30 || lth.lvds_ver == 0x40) {
4013 bios->fp.fpxlatetableptr = bios->fp.lvdsmanufacturerpointer +
4015 bios->fp.xlatwidth = lth.recordlen;
4017 if (bios->fp.fpxlatetableptr == 0x0) {
4018 NV_ERROR(dev, "Pointer to flat panel xlat table invalid\n");
4022 fpstrapping = get_fp_strap(dev, bios);
4024 fpindex = bios->data[bios->fp.fpxlatetableptr +
4025 fpstrapping * bios->fp.xlatwidth];
4027 if (fpindex > fpentries) {
4028 NV_ERROR(dev, "Bad flat panel table index\n");
4032 /* nv4x cards need both a strap value and fpindex of 0xf to use DDC */
4033 if (lth.lvds_ver > 0x10)
4034 bios->fp_no_ddc = fpstrapping != 0xf || fpindex != 0xf;
4037 * If either the strap or xlated fpindex value are 0xf there is no
4038 * panel using a strap-derived bios mode present. this condition
4039 * includes, but is different from, the DDC panel indicator above
4041 if (fpstrapping == 0xf || fpindex == 0xf)
4044 bios->fp.mode_ptr = bios->fp.fptablepointer + headerlen +
4045 recordlen * fpindex + ofs;
4047 NV_TRACE(dev, "BIOS FP mode: %dx%d (%dkHz pixel clock)\n",
4048 ROM16(bios->data[bios->fp.mode_ptr + 11]) + 1,
4049 ROM16(bios->data[bios->fp.mode_ptr + 25]) + 1,
4050 ROM16(bios->data[bios->fp.mode_ptr + 7]) * 10);
4055 bool nouveau_bios_fp_mode(struct drm_device *dev, struct drm_display_mode *mode)
4057 struct drm_nouveau_private *dev_priv = dev->dev_private;
4058 struct nvbios *bios = &dev_priv->vbios;
4059 uint8_t *mode_entry = &bios->data[bios->fp.mode_ptr];
4061 if (!mode) /* just checking whether we can produce a mode */
4062 return bios->fp.mode_ptr;
4064 memset(mode, 0, sizeof(struct drm_display_mode));
4066 * For version 1.0 (version in byte 0):
4067 * bytes 1-2 are "panel type", including bits on whether Colour/mono,
4068 * single/dual link, and type (TFT etc.)
4069 * bytes 3-6 are bits per colour in RGBX
4071 mode->clock = ROM16(mode_entry[7]) * 10;
4072 /* bytes 9-10 is HActive */
4073 mode->hdisplay = ROM16(mode_entry[11]) + 1;
4075 * bytes 13-14 is HValid Start
4076 * bytes 15-16 is HValid End
4078 mode->hsync_start = ROM16(mode_entry[17]) + 1;
4079 mode->hsync_end = ROM16(mode_entry[19]) + 1;
4080 mode->htotal = ROM16(mode_entry[21]) + 1;
4081 /* bytes 23-24, 27-30 similarly, but vertical */
4082 mode->vdisplay = ROM16(mode_entry[25]) + 1;
4083 mode->vsync_start = ROM16(mode_entry[31]) + 1;
4084 mode->vsync_end = ROM16(mode_entry[33]) + 1;
4085 mode->vtotal = ROM16(mode_entry[35]) + 1;
4086 mode->flags |= (mode_entry[37] & 0x10) ?
4087 DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC;
4088 mode->flags |= (mode_entry[37] & 0x1) ?
4089 DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
4091 * bytes 38-39 relate to spread spectrum settings
4092 * bytes 40-43 are something to do with PWM
4095 mode->status = MODE_OK;
4096 mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
4097 drm_mode_set_name(mode);
4098 return bios->fp.mode_ptr;
4101 int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, bool *if_is_24bit)
4104 * The LVDS table header is (mostly) described in
4105 * parse_lvds_manufacturer_table_header(): the BIT header additionally
4106 * contains the dual-link transition pxclk (in 10s kHz), at byte 5 - if
4107 * straps are not being used for the panel, this specifies the frequency
4108 * at which modes should be set up in the dual link style.
4110 * Following the header, the BMP (ver 0xa) table has several records,
4111 * indexed by a separate xlat table, indexed in turn by the fp strap in
4112 * EXTDEV_BOOT. Each record had a config byte, followed by 6 script
4113 * numbers for use by INIT_SUB which controlled panel init and power,
4114 * and finally a dword of ms to sleep between power off and on
4117 * In the BIT versions, the table following the header serves as an
4118 * integrated config and xlat table: the records in the table are
4119 * indexed by the FP strap nibble in EXTDEV_BOOT, and each record has
4120 * two bytes - the first as a config byte, the second for indexing the
4121 * fp mode table pointed to by the BIT 'D' table
4123 * DDC is not used until after card init, so selecting the correct table
4124 * entry and setting the dual link flag for EDID equipped panels,
4125 * requiring tests against the native-mode pixel clock, cannot be done
4126 * until later, when this function should be called with non-zero pxclk
4128 struct drm_nouveau_private *dev_priv = dev->dev_private;
4129 struct nvbios *bios = &dev_priv->vbios;
4130 int fpstrapping = get_fp_strap(dev, bios), lvdsmanufacturerindex = 0;
4131 struct lvdstableheader lth;
4133 int ret, chip_version = bios->chip_version;
4135 ret = parse_lvds_manufacturer_table_header(dev, bios, <h);
4139 switch (lth.lvds_ver) {
4140 case 0x0a: /* pre NV40 */
4141 lvdsmanufacturerindex = bios->data[
4142 bios->fp.fpxlatemanufacturertableptr +
4145 /* we're done if this isn't the EDID panel case */
4149 if (chip_version < 0x25) {
4152 * It seems the old style lvds script pointer is reused
4153 * to select 18/24 bit colour depth for EDID panels.
4155 lvdsmanufacturerindex =
4156 (bios->legacy.lvds_single_a_script_ptr & 1) ?
4158 if (pxclk >= bios->fp.duallink_transition_clk)
4159 lvdsmanufacturerindex++;
4160 } else if (chip_version < 0x30) {
4161 /* nv28 behaviour (off-chip encoder)
4163 * nv28 does a complex dance of first using byte 121 of
4164 * the EDID to choose the lvdsmanufacturerindex, then
4165 * later attempting to match the EDID manufacturer and
4166 * product IDs in a table (signature 'pidt' (panel id
4167 * table?)), setting an lvdsmanufacturerindex of 0 and
4168 * an fp strap of the match index (or 0xf if none)
4170 lvdsmanufacturerindex = 0;
4172 /* nv31, nv34 behaviour */
4173 lvdsmanufacturerindex = 0;
4174 if (pxclk >= bios->fp.duallink_transition_clk)
4175 lvdsmanufacturerindex = 2;
4176 if (pxclk >= 140000)
4177 lvdsmanufacturerindex = 3;
4181 * nvidia set the high nibble of (cr57=f, cr58) to
4182 * lvdsmanufacturerindex in this case; we don't
4185 case 0x30: /* NV4x */
4186 case 0x40: /* G80/G90 */
4187 lvdsmanufacturerindex = fpstrapping;
4190 NV_ERROR(dev, "LVDS table revision not currently supported\n");
4194 lvdsofs = bios->fp.xlated_entry = bios->fp.lvdsmanufacturerpointer + lth.headerlen + lth.recordlen * lvdsmanufacturerindex;
4195 switch (lth.lvds_ver) {
4197 bios->fp.power_off_for_reset = bios->data[lvdsofs] & 1;
4198 bios->fp.reset_after_pclk_change = bios->data[lvdsofs] & 2;
4199 bios->fp.dual_link = bios->data[lvdsofs] & 4;
4200 bios->fp.link_c_increment = bios->data[lvdsofs] & 8;
4201 *if_is_24bit = bios->data[lvdsofs] & 16;
4206 * No sign of the "power off for reset" or "reset for panel
4207 * on" bits, but it's safer to assume we should
4209 bios->fp.power_off_for_reset = true;
4210 bios->fp.reset_after_pclk_change = true;
4213 * It's ok lvdsofs is wrong for nv4x edid case; dual_link is
4214 * over-written, and if_is_24bit isn't used
4216 bios->fp.dual_link = bios->data[lvdsofs] & 1;
4217 bios->fp.if_is_24bit = bios->data[lvdsofs] & 2;
4218 bios->fp.strapless_is_24bit = bios->data[bios->fp.lvdsmanufacturerpointer + 4];
4219 bios->fp.duallink_transition_clk = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 5]) * 10;
4223 /* Dell Latitude D620 reports a too-high value for the dual-link
4224 * transition freq, causing us to program the panel incorrectly.
4226 * It doesn't appear the VBIOS actually uses its transition freq
4227 * (90000kHz), instead it uses the "Number of LVDS channels" field
4228 * out of the panel ID structure (http://www.spwg.org/).
4230 * For the moment, a quirk will do :)
4232 if ((dev->pdev->device == 0x01d7) &&
4233 (dev->pdev->subsystem_vendor == 0x1028) &&
4234 (dev->pdev->subsystem_device == 0x01c2)) {
4235 bios->fp.duallink_transition_clk = 80000;
4238 /* set dual_link flag for EDID case */
4239 if (pxclk && (chip_version < 0x25 || chip_version > 0x28))
4240 bios->fp.dual_link = (pxclk >= bios->fp.duallink_transition_clk);
4242 *dl = bios->fp.dual_link;
4248 bios_output_config_match(struct drm_device *dev, struct dcb_entry *dcbent,
4249 uint16_t record, int record_len, int record_nr,
4252 struct drm_nouveau_private *dev_priv = dev->dev_private;
4253 struct nvbios *bios = &dev_priv->vbios;
4258 switch (dcbent->type) {
4268 for (i = 0; i < record_nr; i++, record += record_len) {
4269 table = ROM16(bios->data[record]);
4272 entry = ROM32(bios->data[table]);
4275 v = (entry & 0x00c00000) >> 22;
4276 if (!(v & dcbent->sorconf.link))
4280 v = (entry & 0x000f0000) >> 16;
4281 if (!(v & dcbent->or))
4284 v = (entry & 0x000000f0) >> 4;
4285 if (v != dcbent->location)
4288 v = (entry & 0x0000000f);
4289 if (v != dcbent->type)
4292 return &bios->data[table];
4299 nouveau_bios_dp_table(struct drm_device *dev, struct dcb_entry *dcbent,
4302 struct drm_nouveau_private *dev_priv = dev->dev_private;
4303 struct nvbios *bios = &dev_priv->vbios;
4306 if (!bios->display.dp_table_ptr) {
4307 NV_ERROR(dev, "No pointer to DisplayPort table\n");
4310 table = &bios->data[bios->display.dp_table_ptr];
4312 if (table[0] != 0x20 && table[0] != 0x21) {
4313 NV_ERROR(dev, "DisplayPort table version 0x%02x unknown\n",
4319 return bios_output_config_match(dev, dcbent,
4320 bios->display.dp_table_ptr + table[1],
4321 table[2], table[3], table[0] >= 0x21);
4325 nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent,
4326 uint32_t sub, int pxclk)
4329 * The display script table is located by the BIT 'U' table.
4331 * It contains an array of pointers to various tables describing
4332 * a particular output type. The first 32-bits of the output
4333 * tables contains similar information to a DCB entry, and is
4334 * used to decide whether that particular table is suitable for
4335 * the output you want to access.
4337 * The "record header length" field here seems to indicate the
4338 * offset of the first configuration entry in the output tables.
4339 * This is 10 on most cards I've seen, but 12 has been witnessed
4340 * on DP cards, and there's another script pointer within the
4343 * offset + 0 ( 8 bits): version
4344 * offset + 1 ( 8 bits): header length
4345 * offset + 2 ( 8 bits): record length
4346 * offset + 3 ( 8 bits): number of records
4347 * offset + 4 ( 8 bits): record header length
4348 * offset + 5 (16 bits): pointer to first output script table
4351 struct drm_nouveau_private *dev_priv = dev->dev_private;
4352 struct nvbios *bios = &dev_priv->vbios;
4353 uint8_t *table = &bios->data[bios->display.script_table_ptr];
4354 uint8_t *otable = NULL;
4358 if (!bios->display.script_table_ptr) {
4359 NV_ERROR(dev, "No pointer to output script table\n");
4364 * Nothing useful has been in any of the pre-2.0 tables I've seen,
4365 * so until they are, we really don't need to care.
4367 if (table[0] < 0x20)
4370 if (table[0] != 0x20 && table[0] != 0x21) {
4371 NV_ERROR(dev, "Output script table version 0x%02x unknown\n",
4377 * The output script tables describing a particular output type
4380 * offset + 0 (32 bits): output this table matches (hash of DCB)
4381 * offset + 4 ( 8 bits): unknown
4382 * offset + 5 ( 8 bits): number of configurations
4383 * offset + 6 (16 bits): pointer to some script
4384 * offset + 8 (16 bits): pointer to some script
4387 * offset + 10 : configuration 0
4390 * offset + 10 : pointer to some script
4391 * offset + 12 : configuration 0
4393 * Each config entry is as follows:
4395 * offset + 0 (16 bits): unknown, assumed to be a match value
4396 * offset + 2 (16 bits): pointer to script table (clock set?)
4397 * offset + 4 (16 bits): pointer to script table (reset?)
4399 * There doesn't appear to be a count value to say how many
4400 * entries exist in each script table, instead, a 0 value in
4401 * the first 16-bit word seems to indicate both the end of the
4402 * list and the default entry. The second 16-bit word in the
4403 * script tables is a pointer to the script to execute.
4406 NV_DEBUG_KMS(dev, "Searching for output entry for %d %d %d\n",
4407 dcbent->type, dcbent->location, dcbent->or);
4408 otable = bios_output_config_match(dev, dcbent, table[1] +
4409 bios->display.script_table_ptr,
4410 table[2], table[3], table[0] >= 0x21);
4412 NV_ERROR(dev, "Couldn't find matching output script table\n");
4416 if (pxclk < -2 || pxclk > 0) {
4417 /* Try to find matching script table entry */
4418 for (i = 0; i < otable[5]; i++) {
4419 if (ROM16(otable[table[4] + i*6]) == sub)
4423 if (i == otable[5]) {
4424 NV_ERROR(dev, "Table 0x%04x not found for %d/%d, "
4426 sub, dcbent->type, dcbent->or);
4432 script = ROM16(otable[6]);
4434 NV_DEBUG_KMS(dev, "output script 0 not found\n");
4438 NV_TRACE(dev, "0x%04X: parsing output script 0\n", script);
4439 nouveau_bios_run_init_table(dev, script, dcbent);
4442 script = ROM16(otable[8]);
4444 NV_DEBUG_KMS(dev, "output script 1 not found\n");
4448 NV_TRACE(dev, "0x%04X: parsing output script 1\n", script);
4449 nouveau_bios_run_init_table(dev, script, dcbent);
4453 script = ROM16(otable[10]);
4457 NV_DEBUG_KMS(dev, "output script 2 not found\n");
4461 NV_TRACE(dev, "0x%04X: parsing output script 2\n", script);
4462 nouveau_bios_run_init_table(dev, script, dcbent);
4465 script = ROM16(otable[table[4] + i*6 + 2]);
4467 script = clkcmptable(bios, script, pxclk);
4469 NV_ERROR(dev, "clock script 0 not found\n");
4473 NV_TRACE(dev, "0x%04X: parsing clock script 0\n", script);
4474 nouveau_bios_run_init_table(dev, script, dcbent);
4477 script = ROM16(otable[table[4] + i*6 + 4]);
4479 script = clkcmptable(bios, script, -pxclk);
4481 NV_DEBUG_KMS(dev, "clock script 1 not found\n");
4485 NV_TRACE(dev, "0x%04X: parsing clock script 1\n", script);
4486 nouveau_bios_run_init_table(dev, script, dcbent);
4493 int run_tmds_table(struct drm_device *dev, struct dcb_entry *dcbent, int head, int pxclk)
4496 * the pxclk parameter is in kHz
4498 * This runs the TMDS regs setting code found on BIT bios cards
4500 * For ffs(or) == 1 use the first table, for ffs(or) == 2 and
4501 * ffs(or) == 3, use the second.
4504 struct drm_nouveau_private *dev_priv = dev->dev_private;
4505 struct nvbios *bios = &dev_priv->vbios;
4506 int cv = bios->chip_version;
4507 uint16_t clktable = 0, scriptptr;
4508 uint32_t sel_clk_binding, sel_clk;
4510 /* pre-nv17 off-chip tmds uses scripts, post nv17 doesn't */
4511 if (cv >= 0x17 && cv != 0x1a && cv != 0x20 &&
4512 dcbent->location != DCB_LOC_ON_CHIP)
4515 switch (ffs(dcbent->or)) {
4517 clktable = bios->tmds.output0_script_ptr;
4521 clktable = bios->tmds.output1_script_ptr;
4526 NV_ERROR(dev, "Pixel clock comparison table not found\n");
4530 scriptptr = clkcmptable(bios, clktable, pxclk);
4533 NV_ERROR(dev, "TMDS output init script not found\n");
4537 /* don't let script change pll->head binding */
4538 sel_clk_binding = bios_rd32(bios, NV_PRAMDAC_SEL_CLK) & 0x50000;
4539 run_digital_op_script(dev, scriptptr, dcbent, head, pxclk >= 165000);
4540 sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK) & ~0x50000;
4541 NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, sel_clk | sel_clk_binding);
4546 int get_pll_limits(struct drm_device *dev, uint32_t limit_match, struct pll_lims *pll_lim)
4551 * Version 0x10: NV30, NV31
4552 * One byte header (version), one record of 24 bytes
4553 * Version 0x11: NV36 - Not implemented
4554 * Seems to have same record style as 0x10, but 3 records rather than 1
4555 * Version 0x20: Found on Geforce 6 cards
4556 * Trivial 4 byte BIT header. 31 (0x1f) byte record length
4557 * Version 0x21: Found on Geforce 7, 8 and some Geforce 6 cards
4558 * 5 byte header, fifth byte of unknown purpose. 35 (0x23) byte record
4559 * length in general, some (integrated) have an extra configuration byte
4560 * Version 0x30: Found on Geforce 8, separates the register mapping
4561 * from the limits tables.
4564 struct drm_nouveau_private *dev_priv = dev->dev_private;
4565 struct nvbios *bios = &dev_priv->vbios;
4566 int cv = bios->chip_version, pllindex = 0;
4567 uint8_t pll_lim_ver = 0, headerlen = 0, recordlen = 0, entries = 0;
4568 uint32_t crystal_strap_mask, crystal_straps;
4570 if (!bios->pll_limit_tbl_ptr) {
4571 if (cv == 0x30 || cv == 0x31 || cv == 0x35 || cv == 0x36 ||
4573 NV_ERROR(dev, "Pointer to PLL limits table invalid\n");
4577 pll_lim_ver = bios->data[bios->pll_limit_tbl_ptr];
4579 crystal_strap_mask = 1 << 6;
4580 /* open coded dev->twoHeads test */
4581 if (cv > 0x10 && cv != 0x15 && cv != 0x1a && cv != 0x20)
4582 crystal_strap_mask |= 1 << 22;
4583 crystal_straps = nvReadEXTDEV(dev, NV_PEXTDEV_BOOT_0) &
4586 switch (pll_lim_ver) {
4588 * We use version 0 to indicate a pre limit table bios (single stage
4589 * pll) and load the hard coded limits instead.
4596 * Strictly v0x11 has 3 entries, but the last two don't seem
4608 headerlen = bios->data[bios->pll_limit_tbl_ptr + 1];
4609 recordlen = bios->data[bios->pll_limit_tbl_ptr + 2];
4610 entries = bios->data[bios->pll_limit_tbl_ptr + 3];
4613 NV_ERROR(dev, "PLL limits table revision 0x%X not currently "
4614 "supported\n", pll_lim_ver);
4618 /* initialize all members to zero */
4619 memset(pll_lim, 0, sizeof(struct pll_lims));
4621 if (pll_lim_ver == 0x10 || pll_lim_ver == 0x11) {
4622 uint8_t *pll_rec = &bios->data[bios->pll_limit_tbl_ptr + headerlen + recordlen * pllindex];
4624 pll_lim->vco1.minfreq = ROM32(pll_rec[0]);
4625 pll_lim->vco1.maxfreq = ROM32(pll_rec[4]);
4626 pll_lim->vco2.minfreq = ROM32(pll_rec[8]);
4627 pll_lim->vco2.maxfreq = ROM32(pll_rec[12]);
4628 pll_lim->vco1.min_inputfreq = ROM32(pll_rec[16]);
4629 pll_lim->vco2.min_inputfreq = ROM32(pll_rec[20]);
4630 pll_lim->vco1.max_inputfreq = pll_lim->vco2.max_inputfreq = INT_MAX;
4632 /* these values taken from nv30/31/36 */
4633 pll_lim->vco1.min_n = 0x1;
4635 pll_lim->vco1.min_n = 0x5;
4636 pll_lim->vco1.max_n = 0xff;
4637 pll_lim->vco1.min_m = 0x1;
4638 pll_lim->vco1.max_m = 0xd;
4639 pll_lim->vco2.min_n = 0x4;
4641 * On nv30, 31, 36 (i.e. all cards with two stage PLLs with this
4642 * table version (apart from nv35)), N2 is compared to
4643 * maxN2 (0x46) and 10 * maxM2 (0x4), so set maxN2 to 0x28 and
4646 pll_lim->vco2.max_n = 0x28;
4647 if (cv == 0x30 || cv == 0x35)
4648 /* only 5 bits available for N2 on nv30/35 */
4649 pll_lim->vco2.max_n = 0x1f;
4650 pll_lim->vco2.min_m = 0x1;
4651 pll_lim->vco2.max_m = 0x4;
4652 pll_lim->max_log2p = 0x7;
4653 pll_lim->max_usable_log2p = 0x6;
4654 } else if (pll_lim_ver == 0x20 || pll_lim_ver == 0x21) {
4655 uint16_t plloffs = bios->pll_limit_tbl_ptr + headerlen;
4656 uint32_t reg = 0; /* default match */
4661 * First entry is default match, if nothing better. warn if
4664 if (ROM32(bios->data[plloffs]))
4665 NV_WARN(dev, "Default PLL limit entry has non-zero "
4666 "register field\n");
4668 if (limit_match > MAX_PLL_TYPES)
4669 /* we've been passed a reg as the match */
4671 else /* limit match is a pll type */
4672 for (i = 1; i < entries && !reg; i++) {
4673 uint32_t cmpreg = ROM32(bios->data[plloffs + recordlen * i]);
4675 if (limit_match == NVPLL &&
4676 (cmpreg == NV_PRAMDAC_NVPLL_COEFF || cmpreg == 0x4000))
4678 if (limit_match == MPLL &&
4679 (cmpreg == NV_PRAMDAC_MPLL_COEFF || cmpreg == 0x4020))
4681 if (limit_match == VPLL1 &&
4682 (cmpreg == NV_PRAMDAC_VPLL_COEFF || cmpreg == 0x4010))
4684 if (limit_match == VPLL2 &&
4685 (cmpreg == NV_RAMDAC_VPLL2 || cmpreg == 0x4018))
4689 for (i = 1; i < entries; i++)
4690 if (ROM32(bios->data[plloffs + recordlen * i]) == reg) {
4695 pll_rec = &bios->data[plloffs + recordlen * pllindex];
4697 BIOSLOG(bios, "Loading PLL limits for reg 0x%08x\n",
4698 pllindex ? reg : 0);
4701 * Frequencies are stored in tables in MHz, kHz are more
4702 * useful, so we convert.
4705 /* What output frequencies can each VCO generate? */
4706 pll_lim->vco1.minfreq = ROM16(pll_rec[4]) * 1000;
4707 pll_lim->vco1.maxfreq = ROM16(pll_rec[6]) * 1000;
4708 pll_lim->vco2.minfreq = ROM16(pll_rec[8]) * 1000;
4709 pll_lim->vco2.maxfreq = ROM16(pll_rec[10]) * 1000;
4711 /* What input frequencies they accept (past the m-divider)? */
4712 pll_lim->vco1.min_inputfreq = ROM16(pll_rec[12]) * 1000;
4713 pll_lim->vco2.min_inputfreq = ROM16(pll_rec[14]) * 1000;
4714 pll_lim->vco1.max_inputfreq = ROM16(pll_rec[16]) * 1000;
4715 pll_lim->vco2.max_inputfreq = ROM16(pll_rec[18]) * 1000;
4717 /* What values are accepted as multiplier and divider? */
4718 pll_lim->vco1.min_n = pll_rec[20];
4719 pll_lim->vco1.max_n = pll_rec[21];
4720 pll_lim->vco1.min_m = pll_rec[22];
4721 pll_lim->vco1.max_m = pll_rec[23];
4722 pll_lim->vco2.min_n = pll_rec[24];
4723 pll_lim->vco2.max_n = pll_rec[25];
4724 pll_lim->vco2.min_m = pll_rec[26];
4725 pll_lim->vco2.max_m = pll_rec[27];
4727 pll_lim->max_usable_log2p = pll_lim->max_log2p = pll_rec[29];
4728 if (pll_lim->max_log2p > 0x7)
4729 /* pll decoding in nv_hw.c assumes never > 7 */
4730 NV_WARN(dev, "Max log2 P value greater than 7 (%d)\n",
4731 pll_lim->max_log2p);
4733 pll_lim->max_usable_log2p = 0x6;
4734 pll_lim->log2p_bias = pll_rec[30];
4736 if (recordlen > 0x22)
4737 pll_lim->refclk = ROM32(pll_rec[31]);
4739 if (recordlen > 0x23 && pll_rec[35])
4741 "Bits set in PLL configuration byte (%x)\n",
4744 /* C51 special not seen elsewhere */
4745 if (cv == 0x51 && !pll_lim->refclk) {
4746 uint32_t sel_clk = bios_rd32(bios, NV_PRAMDAC_SEL_CLK);
4748 if (((limit_match == NV_PRAMDAC_VPLL_COEFF || limit_match == VPLL1) && sel_clk & 0x20) ||
4749 ((limit_match == NV_RAMDAC_VPLL2 || limit_match == VPLL2) && sel_clk & 0x80)) {
4750 if (bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_CHIP_ID_INDEX) < 0xa3)
4751 pll_lim->refclk = 200000;
4753 pll_lim->refclk = 25000;
4756 } else if (pll_lim_ver == 0x30) { /* ver 0x30 */
4757 uint8_t *entry = &bios->data[bios->pll_limit_tbl_ptr + headerlen];
4758 uint8_t *record = NULL;
4761 BIOSLOG(bios, "Loading PLL limits for register 0x%08x\n",
4764 for (i = 0; i < entries; i++, entry += recordlen) {
4765 if (ROM32(entry[3]) == limit_match) {
4766 record = &bios->data[ROM16(entry[1])];
4772 NV_ERROR(dev, "Register 0x%08x not found in PLL "
4773 "limits table", limit_match);
4777 pll_lim->vco1.minfreq = ROM16(record[0]) * 1000;
4778 pll_lim->vco1.maxfreq = ROM16(record[2]) * 1000;
4779 pll_lim->vco2.minfreq = ROM16(record[4]) * 1000;
4780 pll_lim->vco2.maxfreq = ROM16(record[6]) * 1000;
4781 pll_lim->vco1.min_inputfreq = ROM16(record[8]) * 1000;
4782 pll_lim->vco2.min_inputfreq = ROM16(record[10]) * 1000;
4783 pll_lim->vco1.max_inputfreq = ROM16(record[12]) * 1000;
4784 pll_lim->vco2.max_inputfreq = ROM16(record[14]) * 1000;
4785 pll_lim->vco1.min_n = record[16];
4786 pll_lim->vco1.max_n = record[17];
4787 pll_lim->vco1.min_m = record[18];
4788 pll_lim->vco1.max_m = record[19];
4789 pll_lim->vco2.min_n = record[20];
4790 pll_lim->vco2.max_n = record[21];
4791 pll_lim->vco2.min_m = record[22];
4792 pll_lim->vco2.max_m = record[23];
4793 pll_lim->max_usable_log2p = pll_lim->max_log2p = record[25];
4794 pll_lim->log2p_bias = record[27];
4795 pll_lim->refclk = ROM32(record[28]);
4796 } else if (pll_lim_ver) { /* ver 0x40 */
4797 uint8_t *entry = &bios->data[bios->pll_limit_tbl_ptr + headerlen];
4798 uint8_t *record = NULL;
4801 BIOSLOG(bios, "Loading PLL limits for register 0x%08x\n",
4804 for (i = 0; i < entries; i++, entry += recordlen) {
4805 if (ROM32(entry[3]) == limit_match) {
4806 record = &bios->data[ROM16(entry[1])];
4812 NV_ERROR(dev, "Register 0x%08x not found in PLL "
4813 "limits table", limit_match);
4817 pll_lim->vco1.minfreq = ROM16(record[0]) * 1000;
4818 pll_lim->vco1.maxfreq = ROM16(record[2]) * 1000;
4819 pll_lim->vco1.min_inputfreq = ROM16(record[4]) * 1000;
4820 pll_lim->vco1.max_inputfreq = ROM16(record[6]) * 1000;
4821 pll_lim->vco1.min_m = record[8];
4822 pll_lim->vco1.max_m = record[9];
4823 pll_lim->vco1.min_n = record[10];
4824 pll_lim->vco1.max_n = record[11];
4825 pll_lim->min_p = record[12];
4826 pll_lim->max_p = record[13];
4827 /* where did this go to?? */
4828 if (limit_match == 0x00614100 || limit_match == 0x00614900)
4829 pll_lim->refclk = 27000;
4831 pll_lim->refclk = 100000;
4835 * By now any valid limit table ought to have set a max frequency for
4836 * vco1, so if it's zero it's either a pre limit table bios, or one
4837 * with an empty limit table (seen on nv18)
4839 if (!pll_lim->vco1.maxfreq) {
4840 pll_lim->vco1.minfreq = bios->fminvco;
4841 pll_lim->vco1.maxfreq = bios->fmaxvco;
4842 pll_lim->vco1.min_inputfreq = 0;
4843 pll_lim->vco1.max_inputfreq = INT_MAX;
4844 pll_lim->vco1.min_n = 0x1;
4845 pll_lim->vco1.max_n = 0xff;
4846 pll_lim->vco1.min_m = 0x1;
4847 if (crystal_straps == 0) {
4848 /* nv05 does this, nv11 doesn't, nv10 unknown */
4850 pll_lim->vco1.min_m = 0x7;
4851 pll_lim->vco1.max_m = 0xd;
4854 pll_lim->vco1.min_m = 0x8;
4855 pll_lim->vco1.max_m = 0xe;
4857 if (cv < 0x17 || cv == 0x1a || cv == 0x20)
4858 pll_lim->max_log2p = 4;
4860 pll_lim->max_log2p = 5;
4861 pll_lim->max_usable_log2p = pll_lim->max_log2p;
4864 if (!pll_lim->refclk)
4865 switch (crystal_straps) {
4867 pll_lim->refclk = 13500;
4870 pll_lim->refclk = 14318;
4873 pll_lim->refclk = 27000;
4875 case (1 << 22 | 1 << 6):
4876 pll_lim->refclk = 25000;
4880 NV_DEBUG(dev, "pll.vco1.minfreq: %d\n", pll_lim->vco1.minfreq);
4881 NV_DEBUG(dev, "pll.vco1.maxfreq: %d\n", pll_lim->vco1.maxfreq);
4882 NV_DEBUG(dev, "pll.vco1.min_inputfreq: %d\n", pll_lim->vco1.min_inputfreq);
4883 NV_DEBUG(dev, "pll.vco1.max_inputfreq: %d\n", pll_lim->vco1.max_inputfreq);
4884 NV_DEBUG(dev, "pll.vco1.min_n: %d\n", pll_lim->vco1.min_n);
4885 NV_DEBUG(dev, "pll.vco1.max_n: %d\n", pll_lim->vco1.max_n);
4886 NV_DEBUG(dev, "pll.vco1.min_m: %d\n", pll_lim->vco1.min_m);
4887 NV_DEBUG(dev, "pll.vco1.max_m: %d\n", pll_lim->vco1.max_m);
4888 if (pll_lim->vco2.maxfreq) {
4889 NV_DEBUG(dev, "pll.vco2.minfreq: %d\n", pll_lim->vco2.minfreq);
4890 NV_DEBUG(dev, "pll.vco2.maxfreq: %d\n", pll_lim->vco2.maxfreq);
4891 NV_DEBUG(dev, "pll.vco2.min_inputfreq: %d\n", pll_lim->vco2.min_inputfreq);
4892 NV_DEBUG(dev, "pll.vco2.max_inputfreq: %d\n", pll_lim->vco2.max_inputfreq);
4893 NV_DEBUG(dev, "pll.vco2.min_n: %d\n", pll_lim->vco2.min_n);
4894 NV_DEBUG(dev, "pll.vco2.max_n: %d\n", pll_lim->vco2.max_n);
4895 NV_DEBUG(dev, "pll.vco2.min_m: %d\n", pll_lim->vco2.min_m);
4896 NV_DEBUG(dev, "pll.vco2.max_m: %d\n", pll_lim->vco2.max_m);
4898 if (!pll_lim->max_p) {
4899 NV_DEBUG(dev, "pll.max_log2p: %d\n", pll_lim->max_log2p);
4900 NV_DEBUG(dev, "pll.log2p_bias: %d\n", pll_lim->log2p_bias);
4902 NV_DEBUG(dev, "pll.min_p: %d\n", pll_lim->min_p);
4903 NV_DEBUG(dev, "pll.max_p: %d\n", pll_lim->max_p);
4905 NV_DEBUG(dev, "pll.refclk: %d\n", pll_lim->refclk);
4910 static void parse_bios_version(struct drm_device *dev, struct nvbios *bios, uint16_t offset)
4913 * offset + 0 (8 bits): Micro version
4914 * offset + 1 (8 bits): Minor version
4915 * offset + 2 (8 bits): Chip version
4916 * offset + 3 (8 bits): Major version
4919 bios->major_version = bios->data[offset + 3];
4920 bios->chip_version = bios->data[offset + 2];
4921 NV_TRACE(dev, "Bios version %02x.%02x.%02x.%02x\n",
4922 bios->data[offset + 3], bios->data[offset + 2],
4923 bios->data[offset + 1], bios->data[offset]);
4926 static void parse_script_table_pointers(struct nvbios *bios, uint16_t offset)
4929 * Parses the init table segment for pointers used in script execution.
4931 * offset + 0 (16 bits): init script tables pointer
4932 * offset + 2 (16 bits): macro index table pointer
4933 * offset + 4 (16 bits): macro table pointer
4934 * offset + 6 (16 bits): condition table pointer
4935 * offset + 8 (16 bits): io condition table pointer
4936 * offset + 10 (16 bits): io flag condition table pointer
4937 * offset + 12 (16 bits): init function table pointer
4940 bios->init_script_tbls_ptr = ROM16(bios->data[offset]);
4941 bios->macro_index_tbl_ptr = ROM16(bios->data[offset + 2]);
4942 bios->macro_tbl_ptr = ROM16(bios->data[offset + 4]);
4943 bios->condition_tbl_ptr = ROM16(bios->data[offset + 6]);
4944 bios->io_condition_tbl_ptr = ROM16(bios->data[offset + 8]);
4945 bios->io_flag_condition_tbl_ptr = ROM16(bios->data[offset + 10]);
4946 bios->init_function_tbl_ptr = ROM16(bios->data[offset + 12]);
4949 static int parse_bit_A_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
4952 * Parses the load detect values for g80 cards.
4954 * offset + 0 (16 bits): loadval table pointer
4957 uint16_t load_table_ptr;
4958 uint8_t version, headerlen, entrylen, num_entries;
4960 if (bitentry->length != 3) {
4961 NV_ERROR(dev, "Do not understand BIT A table\n");
4965 load_table_ptr = ROM16(bios->data[bitentry->offset]);
4967 if (load_table_ptr == 0x0) {
4968 NV_ERROR(dev, "Pointer to BIT loadval table invalid\n");
4972 version = bios->data[load_table_ptr];
4974 if (version != 0x10) {
4975 NV_ERROR(dev, "BIT loadval table version %d.%d not supported\n",
4976 version >> 4, version & 0xF);
4980 headerlen = bios->data[load_table_ptr + 1];
4981 entrylen = bios->data[load_table_ptr + 2];
4982 num_entries = bios->data[load_table_ptr + 3];
4984 if (headerlen != 4 || entrylen != 4 || num_entries != 2) {
4985 NV_ERROR(dev, "Do not understand BIT loadval table\n");
4989 /* First entry is normal dac, 2nd tv-out perhaps? */
4990 bios->dactestval = ROM32(bios->data[load_table_ptr + headerlen]) & 0x3ff;
4995 static int parse_bit_C_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
4998 * offset + 8 (16 bits): PLL limits table pointer
5000 * There's more in here, but that's unknown.
5003 if (bitentry->length < 10) {
5004 NV_ERROR(dev, "Do not understand BIT C table\n");
5008 bios->pll_limit_tbl_ptr = ROM16(bios->data[bitentry->offset + 8]);
5013 static int parse_bit_display_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
5016 * Parses the flat panel table segment that the bit entry points to.
5017 * Starting at bitentry->offset:
5019 * offset + 0 (16 bits): ??? table pointer - seems to have 18 byte
5020 * records beginning with a freq.
5021 * offset + 2 (16 bits): mode table pointer
5024 if (bitentry->length != 4) {
5025 NV_ERROR(dev, "Do not understand BIT display table\n");
5029 bios->fp.fptablepointer = ROM16(bios->data[bitentry->offset + 2]);
5034 static int parse_bit_init_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
5037 * Parses the init table segment that the bit entry points to.
5039 * See parse_script_table_pointers for layout
5042 if (bitentry->length < 14) {
5043 NV_ERROR(dev, "Do not understand init table\n");
5047 parse_script_table_pointers(bios, bitentry->offset);
5049 if (bitentry->length >= 16)
5050 bios->some_script_ptr = ROM16(bios->data[bitentry->offset + 14]);
5051 if (bitentry->length >= 18)
5052 bios->init96_tbl_ptr = ROM16(bios->data[bitentry->offset + 16]);
5057 static int parse_bit_i_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
5060 * BIT 'i' (info?) table
5062 * offset + 0 (32 bits): BIOS version dword (as in B table)
5063 * offset + 5 (8 bits): BIOS feature byte (same as for BMP?)
5064 * offset + 13 (16 bits): pointer to table containing DAC load
5065 * detection comparison values
5067 * There's other things in the table, purpose unknown
5070 uint16_t daccmpoffset;
5071 uint8_t dacver, dacheaderlen;
5073 if (bitentry->length < 6) {
5074 NV_ERROR(dev, "BIT i table too short for needed information\n");
5078 parse_bios_version(dev, bios, bitentry->offset);
5081 * bit 4 seems to indicate a mobile bios (doesn't suffer from BMP's
5082 * Quadro identity crisis), other bits possibly as for BMP feature byte
5084 bios->feature_byte = bios->data[bitentry->offset + 5];
5085 bios->is_mobile = bios->feature_byte & FEATURE_MOBILE;
5087 if (bitentry->length < 15) {
5088 NV_WARN(dev, "BIT i table not long enough for DAC load "
5089 "detection comparison table\n");
5093 daccmpoffset = ROM16(bios->data[bitentry->offset + 13]);
5095 /* doesn't exist on g80 */
5100 * The first value in the table, following the header, is the
5101 * comparison value, the second entry is a comparison value for
5102 * TV load detection.
5105 dacver = bios->data[daccmpoffset];
5106 dacheaderlen = bios->data[daccmpoffset + 1];
5108 if (dacver != 0x00 && dacver != 0x10) {
5109 NV_WARN(dev, "DAC load detection comparison table version "
5110 "%d.%d not known\n", dacver >> 4, dacver & 0xf);
5114 bios->dactestval = ROM32(bios->data[daccmpoffset + dacheaderlen]);
5115 bios->tvdactestval = ROM32(bios->data[daccmpoffset + dacheaderlen + 4]);
5120 static int parse_bit_lvds_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
5123 * Parses the LVDS table segment that the bit entry points to.
5124 * Starting at bitentry->offset:
5126 * offset + 0 (16 bits): LVDS strap xlate table pointer
5129 if (bitentry->length != 2) {
5130 NV_ERROR(dev, "Do not understand BIT LVDS table\n");
5135 * No idea if it's still called the LVDS manufacturer table, but
5136 * the concept's close enough.
5138 bios->fp.lvdsmanufacturerpointer = ROM16(bios->data[bitentry->offset]);
5144 parse_bit_M_tbl_entry(struct drm_device *dev, struct nvbios *bios,
5145 struct bit_entry *bitentry)
5148 * offset + 2 (8 bits): number of options in an
5149 * INIT_RAM_RESTRICT_ZM_REG_GROUP opcode option set
5150 * offset + 3 (16 bits): pointer to strap xlate table for RAM
5151 * restrict option selection
5153 * There's a bunch of bits in this table other than the RAM restrict
5154 * stuff that we don't use - their use currently unknown
5158 * Older bios versions don't have a sufficiently long table for
5161 if (bitentry->length < 0x5)
5164 if (bitentry->id[1] < 2) {
5165 bios->ram_restrict_group_count = bios->data[bitentry->offset + 2];
5166 bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 3]);
5168 bios->ram_restrict_group_count = bios->data[bitentry->offset + 0];
5169 bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 1]);
5175 static int parse_bit_tmds_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
5178 * Parses the pointer to the TMDS table
5180 * Starting at bitentry->offset:
5182 * offset + 0 (16 bits): TMDS table pointer
5184 * The TMDS table is typically found just before the DCB table, with a
5185 * characteristic signature of 0x11,0x13 (1.1 being version, 0x13 being
5188 * At offset +7 is a pointer to a script, which I don't know how to
5190 * At offset +9 is a pointer to another script, likewise
5191 * Offset +11 has a pointer to a table where the first word is a pxclk
5192 * frequency and the second word a pointer to a script, which should be
5193 * run if the comparison pxclk frequency is less than the pxclk desired.
5194 * This repeats for decreasing comparison frequencies
5195 * Offset +13 has a pointer to a similar table
5196 * The selection of table (and possibly +7/+9 script) is dictated by
5197 * "or" from the DCB.
5200 uint16_t tmdstableptr, script1, script2;
5202 if (bitentry->length != 2) {
5203 NV_ERROR(dev, "Do not understand BIT TMDS table\n");
5207 tmdstableptr = ROM16(bios->data[bitentry->offset]);
5209 if (tmdstableptr == 0x0) {
5210 NV_ERROR(dev, "Pointer to TMDS table invalid\n");
5214 /* nv50+ has v2.0, but we don't parse it atm */
5215 if (bios->data[tmdstableptr] != 0x11) {
5217 "TMDS table revision %d.%d not currently supported\n",
5218 bios->data[tmdstableptr] >> 4, bios->data[tmdstableptr] & 0xf);
5223 * These two scripts are odd: they don't seem to get run even when
5224 * they are not stubbed.
5226 script1 = ROM16(bios->data[tmdstableptr + 7]);
5227 script2 = ROM16(bios->data[tmdstableptr + 9]);
5228 if (bios->data[script1] != 'q' || bios->data[script2] != 'q')
5229 NV_WARN(dev, "TMDS table script pointers not stubbed\n");
5231 bios->tmds.output0_script_ptr = ROM16(bios->data[tmdstableptr + 11]);
5232 bios->tmds.output1_script_ptr = ROM16(bios->data[tmdstableptr + 13]);
5238 parse_bit_U_tbl_entry(struct drm_device *dev, struct nvbios *bios,
5239 struct bit_entry *bitentry)
5242 * Parses the pointer to the G80 output script tables
5244 * Starting at bitentry->offset:
5246 * offset + 0 (16 bits): output script table pointer
5249 uint16_t outputscripttableptr;
5251 if (bitentry->length != 3) {
5252 NV_ERROR(dev, "Do not understand BIT U table\n");
5256 outputscripttableptr = ROM16(bios->data[bitentry->offset]);
5257 bios->display.script_table_ptr = outputscripttableptr;
5262 parse_bit_displayport_tbl_entry(struct drm_device *dev, struct nvbios *bios,
5263 struct bit_entry *bitentry)
5265 bios->display.dp_table_ptr = ROM16(bios->data[bitentry->offset]);
5271 int (* const parse_fn)(struct drm_device *, struct nvbios *, struct bit_entry *);
5274 #define BIT_TABLE(id, funcid) ((struct bit_table){ id, parse_bit_##funcid##_tbl_entry })
5277 parse_bit_table(struct nvbios *bios, const uint16_t bitoffset,
5278 struct bit_table *table)
5280 struct drm_device *dev = bios->dev;
5281 uint8_t maxentries = bios->data[bitoffset + 4];
5283 struct bit_entry bitentry;
5285 for (i = 0, offset = bitoffset + 6; i < maxentries; i++, offset += 6) {
5286 bitentry.id[0] = bios->data[offset];
5288 if (bitentry.id[0] != table->id)
5291 bitentry.id[1] = bios->data[offset + 1];
5292 bitentry.length = ROM16(bios->data[offset + 2]);
5293 bitentry.offset = ROM16(bios->data[offset + 4]);
5295 return table->parse_fn(dev, bios, &bitentry);
5298 NV_INFO(dev, "BIT table '%c' not found\n", table->id);
5303 parse_bit_structure(struct nvbios *bios, const uint16_t bitoffset)
5308 * The only restriction on parsing order currently is having 'i' first
5309 * for use of bios->*_version or bios->feature_byte while parsing;
5310 * functions shouldn't be actually *doing* anything apart from pulling
5311 * data from the image into the bios struct, thus no interdependencies
5313 ret = parse_bit_table(bios, bitoffset, &BIT_TABLE('i', i));
5314 if (ret) /* info? */
5316 if (bios->major_version >= 0x60) /* g80+ */
5317 parse_bit_table(bios, bitoffset, &BIT_TABLE('A', A));
5318 ret = parse_bit_table(bios, bitoffset, &BIT_TABLE('C', C));
5321 parse_bit_table(bios, bitoffset, &BIT_TABLE('D', display));
5322 ret = parse_bit_table(bios, bitoffset, &BIT_TABLE('I', init));
5325 parse_bit_table(bios, bitoffset, &BIT_TABLE('M', M)); /* memory? */
5326 parse_bit_table(bios, bitoffset, &BIT_TABLE('L', lvds));
5327 parse_bit_table(bios, bitoffset, &BIT_TABLE('T', tmds));
5328 parse_bit_table(bios, bitoffset, &BIT_TABLE('U', U));
5329 parse_bit_table(bios, bitoffset, &BIT_TABLE('d', displayport));
5334 static int parse_bmp_structure(struct drm_device *dev, struct nvbios *bios, unsigned int offset)
5337 * Parses the BMP structure for useful things, but does not act on them
5339 * offset + 5: BMP major version
5340 * offset + 6: BMP minor version
5341 * offset + 9: BMP feature byte
5342 * offset + 10: BCD encoded BIOS version
5344 * offset + 18: init script table pointer (for bios versions < 5.10h)
5345 * offset + 20: extra init script table pointer (for bios
5348 * offset + 24: memory init table pointer (used on early bios versions)
5349 * offset + 26: SDR memory sequencing setup data table
5350 * offset + 28: DDR memory sequencing setup data table
5352 * offset + 54: index of I2C CRTC pair to use for CRT output
5353 * offset + 55: index of I2C CRTC pair to use for TV output
5354 * offset + 56: index of I2C CRTC pair to use for flat panel output
5355 * offset + 58: write CRTC index for I2C pair 0
5356 * offset + 59: read CRTC index for I2C pair 0
5357 * offset + 60: write CRTC index for I2C pair 1
5358 * offset + 61: read CRTC index for I2C pair 1
5360 * offset + 67: maximum internal PLL frequency (single stage PLL)
5361 * offset + 71: minimum internal PLL frequency (single stage PLL)
5363 * offset + 75: script table pointers, as described in
5364 * parse_script_table_pointers
5366 * offset + 89: TMDS single link output A table pointer
5367 * offset + 91: TMDS single link output B table pointer
5368 * offset + 95: LVDS single link output A table pointer
5369 * offset + 105: flat panel timings table pointer
5370 * offset + 107: flat panel strapping translation table pointer
5371 * offset + 117: LVDS manufacturer panel config table pointer
5372 * offset + 119: LVDS manufacturer strapping translation table pointer
5374 * offset + 142: PLL limits table pointer
5376 * offset + 156: minimum pixel clock for LVDS dual link
5379 uint8_t *bmp = &bios->data[offset], bmp_version_major, bmp_version_minor;
5381 uint16_t legacy_scripts_offset, legacy_i2c_offset;
5383 /* load needed defaults in case we can't parse this info */
5384 bios->dcb.i2c[0].write = NV_CIO_CRE_DDC_WR__INDEX;
5385 bios->dcb.i2c[0].read = NV_CIO_CRE_DDC_STATUS__INDEX;
5386 bios->dcb.i2c[1].write = NV_CIO_CRE_DDC0_WR__INDEX;
5387 bios->dcb.i2c[1].read = NV_CIO_CRE_DDC0_STATUS__INDEX;
5388 bios->digital_min_front_porch = 0x4b;
5389 bios->fmaxvco = 256000;
5390 bios->fminvco = 128000;
5391 bios->fp.duallink_transition_clk = 90000;
5393 bmp_version_major = bmp[5];
5394 bmp_version_minor = bmp[6];
5396 NV_TRACE(dev, "BMP version %d.%d\n",
5397 bmp_version_major, bmp_version_minor);
5400 * Make sure that 0x36 is blank and can't be mistaken for a DCB
5401 * pointer on early versions
5403 if (bmp_version_major < 5)
5404 *(uint16_t *)&bios->data[0x36] = 0;
5407 * Seems that the minor version was 1 for all major versions prior
5408 * to 5. Version 6 could theoretically exist, but I suspect BIT
5411 if ((bmp_version_major < 5 && bmp_version_minor != 1) || bmp_version_major > 5) {
5412 NV_ERROR(dev, "You have an unsupported BMP version. "
5413 "Please send in your bios\n");
5417 if (bmp_version_major == 0)
5418 /* nothing that's currently useful in this version */
5420 else if (bmp_version_major == 1)
5421 bmplength = 44; /* exact for 1.01 */
5422 else if (bmp_version_major == 2)
5423 bmplength = 48; /* exact for 2.01 */
5424 else if (bmp_version_major == 3)
5426 /* guessed - mem init tables added in this version */
5427 else if (bmp_version_major == 4 || bmp_version_minor < 0x1)
5428 /* don't know if 5.0 exists... */
5430 /* guessed - BMP I2C indices added in version 4*/
5431 else if (bmp_version_minor < 0x6)
5432 bmplength = 67; /* exact for 5.01 */
5433 else if (bmp_version_minor < 0x10)
5434 bmplength = 75; /* exact for 5.06 */
5435 else if (bmp_version_minor == 0x10)
5436 bmplength = 89; /* exact for 5.10h */
5437 else if (bmp_version_minor < 0x14)
5438 bmplength = 118; /* exact for 5.11h */
5439 else if (bmp_version_minor < 0x24)
5441 * Not sure of version where pll limits came in;
5442 * certainly exist by 0x24 though.
5444 /* length not exact: this is long enough to get lvds members */
5446 else if (bmp_version_minor < 0x27)
5448 * Length not exact: this is long enough to get pll limit
5454 * Length not exact: this is long enough to get dual link
5460 if (nv_cksum(bmp, 8)) {
5461 NV_ERROR(dev, "Bad BMP checksum\n");
5466 * Bit 4 seems to indicate either a mobile bios or a quadro card --
5467 * mobile behaviour consistent (nv11+), quadro only seen nv18gl-nv36gl
5468 * (not nv10gl), bit 5 that the flat panel tables are present, and
5471 bios->feature_byte = bmp[9];
5473 parse_bios_version(dev, bios, offset + 10);
5475 if (bmp_version_major < 5 || bmp_version_minor < 0x10)
5476 bios->old_style_init = true;
5477 legacy_scripts_offset = 18;
5478 if (bmp_version_major < 2)
5479 legacy_scripts_offset -= 4;
5480 bios->init_script_tbls_ptr = ROM16(bmp[legacy_scripts_offset]);
5481 bios->extra_init_script_tbl_ptr = ROM16(bmp[legacy_scripts_offset + 2]);
5483 if (bmp_version_major > 2) { /* appears in BMP 3 */
5484 bios->legacy.mem_init_tbl_ptr = ROM16(bmp[24]);
5485 bios->legacy.sdr_seq_tbl_ptr = ROM16(bmp[26]);
5486 bios->legacy.ddr_seq_tbl_ptr = ROM16(bmp[28]);
5489 legacy_i2c_offset = 0x48; /* BMP version 2 & 3 */
5491 legacy_i2c_offset = offset + 54;
5492 bios->legacy.i2c_indices.crt = bios->data[legacy_i2c_offset];
5493 bios->legacy.i2c_indices.tv = bios->data[legacy_i2c_offset + 1];
5494 bios->legacy.i2c_indices.panel = bios->data[legacy_i2c_offset + 2];
5495 if (bios->data[legacy_i2c_offset + 4])
5496 bios->dcb.i2c[0].write = bios->data[legacy_i2c_offset + 4];
5497 if (bios->data[legacy_i2c_offset + 5])
5498 bios->dcb.i2c[0].read = bios->data[legacy_i2c_offset + 5];
5499 if (bios->data[legacy_i2c_offset + 6])
5500 bios->dcb.i2c[1].write = bios->data[legacy_i2c_offset + 6];
5501 if (bios->data[legacy_i2c_offset + 7])
5502 bios->dcb.i2c[1].read = bios->data[legacy_i2c_offset + 7];
5504 if (bmplength > 74) {
5505 bios->fmaxvco = ROM32(bmp[67]);
5506 bios->fminvco = ROM32(bmp[71]);
5509 parse_script_table_pointers(bios, offset + 75);
5510 if (bmplength > 94) {
5511 bios->tmds.output0_script_ptr = ROM16(bmp[89]);
5512 bios->tmds.output1_script_ptr = ROM16(bmp[91]);
5514 * Never observed in use with lvds scripts, but is reused for
5515 * 18/24 bit panel interface default for EDID equipped panels
5516 * (if_is_24bit not set directly to avoid any oscillation).
5518 bios->legacy.lvds_single_a_script_ptr = ROM16(bmp[95]);
5520 if (bmplength > 108) {
5521 bios->fp.fptablepointer = ROM16(bmp[105]);
5522 bios->fp.fpxlatetableptr = ROM16(bmp[107]);
5523 bios->fp.xlatwidth = 1;
5525 if (bmplength > 120) {
5526 bios->fp.lvdsmanufacturerpointer = ROM16(bmp[117]);
5527 bios->fp.fpxlatemanufacturertableptr = ROM16(bmp[119]);
5529 if (bmplength > 143)
5530 bios->pll_limit_tbl_ptr = ROM16(bmp[142]);
5532 if (bmplength > 157)
5533 bios->fp.duallink_transition_clk = ROM16(bmp[156]) * 10;
5538 static uint16_t findstr(uint8_t *data, int n, const uint8_t *str, int len)
5542 for (i = 0; i <= (n - len); i++) {
5543 for (j = 0; j < len; j++)
5544 if (data[i + j] != str[j])
5553 static struct dcb_gpio_entry *
5554 new_gpio_entry(struct nvbios *bios)
5556 struct dcb_gpio_table *gpio = &bios->dcb.gpio;
5558 return &gpio->entry[gpio->entries++];
5561 struct dcb_gpio_entry *
5562 nouveau_bios_gpio_entry(struct drm_device *dev, enum dcb_gpio_tag tag)
5564 struct drm_nouveau_private *dev_priv = dev->dev_private;
5565 struct nvbios *bios = &dev_priv->vbios;
5568 for (i = 0; i < bios->dcb.gpio.entries; i++) {
5569 if (bios->dcb.gpio.entry[i].tag != tag)
5572 return &bios->dcb.gpio.entry[i];
5579 parse_dcb30_gpio_entry(struct nvbios *bios, uint16_t offset)
5581 struct dcb_gpio_entry *gpio;
5582 uint16_t ent = ROM16(bios->data[offset]);
5583 uint8_t line = ent & 0x1f,
5584 tag = ent >> 5 & 0x3f,
5585 flags = ent >> 11 & 0x1f;
5590 gpio = new_gpio_entry(bios);
5594 gpio->invert = flags != 4;
5599 parse_dcb40_gpio_entry(struct nvbios *bios, uint16_t offset)
5601 uint32_t entry = ROM32(bios->data[offset]);
5602 struct dcb_gpio_entry *gpio;
5604 if ((entry & 0x0000ff00) == 0x0000ff00)
5607 gpio = new_gpio_entry(bios);
5608 gpio->tag = (entry & 0x0000ff00) >> 8;
5609 gpio->line = (entry & 0x0000001f) >> 0;
5610 gpio->state_default = (entry & 0x01000000) >> 24;
5611 gpio->state[0] = (entry & 0x18000000) >> 27;
5612 gpio->state[1] = (entry & 0x60000000) >> 29;
5613 gpio->entry = entry;
5617 parse_dcb_gpio_table(struct nvbios *bios)
5619 struct drm_device *dev = bios->dev;
5620 uint16_t gpio_table_ptr = bios->dcb.gpio_table_ptr;
5621 uint8_t *gpio_table = &bios->data[gpio_table_ptr];
5622 int header_len = gpio_table[1],
5623 entries = gpio_table[2],
5624 entry_len = gpio_table[3];
5625 void (*parse_entry)(struct nvbios *, uint16_t) = NULL;
5628 if (bios->dcb.version >= 0x40) {
5629 if (gpio_table_ptr && entry_len != 4) {
5630 NV_WARN(dev, "Invalid DCB GPIO table entry length.\n");
5634 parse_entry = parse_dcb40_gpio_entry;
5636 } else if (bios->dcb.version >= 0x30) {
5637 if (gpio_table_ptr && entry_len != 2) {
5638 NV_WARN(dev, "Invalid DCB GPIO table entry length.\n");
5642 parse_entry = parse_dcb30_gpio_entry;
5644 } else if (bios->dcb.version >= 0x22) {
5646 * DCBs older than v3.0 don't really have a GPIO
5647 * table, instead they keep some GPIO info at fixed
5650 uint16_t dcbptr = ROM16(bios->data[0x36]);
5651 uint8_t *tvdac_gpio = &bios->data[dcbptr - 5];
5653 if (tvdac_gpio[0] & 1) {
5654 struct dcb_gpio_entry *gpio = new_gpio_entry(bios);
5656 gpio->tag = DCB_GPIO_TVDAC0;
5657 gpio->line = tvdac_gpio[1] >> 4;
5658 gpio->invert = tvdac_gpio[0] & 2;
5662 if (!gpio_table_ptr)
5665 if (entries > DCB_MAX_NUM_GPIO_ENTRIES) {
5666 NV_WARN(dev, "Too many entries in the DCB GPIO table.\n");
5667 entries = DCB_MAX_NUM_GPIO_ENTRIES;
5670 for (i = 0; i < entries; i++)
5671 parse_entry(bios, gpio_table_ptr + header_len + entry_len * i);
5674 struct dcb_connector_table_entry *
5675 nouveau_bios_connector_entry(struct drm_device *dev, int index)
5677 struct drm_nouveau_private *dev_priv = dev->dev_private;
5678 struct nvbios *bios = &dev_priv->vbios;
5679 struct dcb_connector_table_entry *cte;
5681 if (index >= bios->dcb.connector.entries)
5684 cte = &bios->dcb.connector.entry[index];
5685 if (cte->type == 0xff)
5691 static enum dcb_connector_type
5692 divine_connector_type(struct nvbios *bios, int index)
5694 struct dcb_table *dcb = &bios->dcb;
5695 unsigned encoders = 0, type = DCB_CONNECTOR_NONE;
5698 for (i = 0; i < dcb->entries; i++) {
5699 if (dcb->entry[i].connector == index)
5700 encoders |= (1 << dcb->entry[i].type);
5703 if (encoders & (1 << OUTPUT_DP)) {
5704 if (encoders & (1 << OUTPUT_TMDS))
5705 type = DCB_CONNECTOR_DP;
5707 type = DCB_CONNECTOR_eDP;
5709 if (encoders & (1 << OUTPUT_TMDS)) {
5710 if (encoders & (1 << OUTPUT_ANALOG))
5711 type = DCB_CONNECTOR_DVI_I;
5713 type = DCB_CONNECTOR_DVI_D;
5715 if (encoders & (1 << OUTPUT_ANALOG)) {
5716 type = DCB_CONNECTOR_VGA;
5718 if (encoders & (1 << OUTPUT_LVDS)) {
5719 type = DCB_CONNECTOR_LVDS;
5721 if (encoders & (1 << OUTPUT_TV)) {
5722 type = DCB_CONNECTOR_TV_0;
5729 apply_dcb_connector_quirks(struct nvbios *bios, int idx)
5731 struct dcb_connector_table_entry *cte = &bios->dcb.connector.entry[idx];
5732 struct drm_device *dev = bios->dev;
5734 /* Gigabyte NX85T */
5735 if ((dev->pdev->device == 0x0421) &&
5736 (dev->pdev->subsystem_vendor == 0x1458) &&
5737 (dev->pdev->subsystem_device == 0x344c)) {
5738 if (cte->type == DCB_CONNECTOR_HDMI_1)
5739 cte->type = DCB_CONNECTOR_DVI_I;
5744 parse_dcb_connector_table(struct nvbios *bios)
5746 struct drm_device *dev = bios->dev;
5747 struct dcb_connector_table *ct = &bios->dcb.connector;
5748 struct dcb_connector_table_entry *cte;
5749 uint8_t *conntab = &bios->data[bios->dcb.connector_table_ptr];
5753 if (!bios->dcb.connector_table_ptr) {
5754 NV_DEBUG_KMS(dev, "No DCB connector table present\n");
5758 NV_INFO(dev, "DCB connector table: VHER 0x%02x %d %d %d\n",
5759 conntab[0], conntab[1], conntab[2], conntab[3]);
5760 if ((conntab[0] != 0x30 && conntab[0] != 0x40) ||
5761 (conntab[3] != 2 && conntab[3] != 4)) {
5762 NV_ERROR(dev, " Unknown! Please report.\n");
5766 ct->entries = conntab[2];
5768 entry = conntab + conntab[1];
5769 cte = &ct->entry[0];
5770 for (i = 0; i < conntab[2]; i++, entry += conntab[3], cte++) {
5772 if (conntab[3] == 2)
5773 cte->entry = ROM16(entry[0]);
5775 cte->entry = ROM32(entry[0]);
5777 cte->type = (cte->entry & 0x000000ff) >> 0;
5778 cte->index2 = (cte->entry & 0x00000f00) >> 8;
5779 switch (cte->entry & 0x00033000) {
5781 cte->gpio_tag = 0x07;
5784 cte->gpio_tag = 0x08;
5787 cte->gpio_tag = 0x51;
5790 cte->gpio_tag = 0x52;
5793 cte->gpio_tag = 0xff;
5797 if (cte->type == 0xff)
5800 apply_dcb_connector_quirks(bios, i);
5802 NV_INFO(dev, " %d: 0x%08x: type 0x%02x idx %d tag 0x%02x\n",
5803 i, cte->entry, cte->type, cte->index, cte->gpio_tag);
5805 /* check for known types, fallback to guessing the type
5806 * from attached encoders if we hit an unknown.
5808 switch (cte->type) {
5809 case DCB_CONNECTOR_VGA:
5810 case DCB_CONNECTOR_TV_0:
5811 case DCB_CONNECTOR_TV_1:
5812 case DCB_CONNECTOR_TV_3:
5813 case DCB_CONNECTOR_DVI_I:
5814 case DCB_CONNECTOR_DVI_D:
5815 case DCB_CONNECTOR_LVDS:
5816 case DCB_CONNECTOR_DP:
5817 case DCB_CONNECTOR_eDP:
5818 case DCB_CONNECTOR_HDMI_0:
5819 case DCB_CONNECTOR_HDMI_1:
5822 cte->type = divine_connector_type(bios, cte->index);
5823 NV_WARN(dev, "unknown type, using 0x%02x\n", cte->type);
5827 if (nouveau_override_conntype) {
5828 int type = divine_connector_type(bios, cte->index);
5829 if (type != cte->type)
5830 NV_WARN(dev, " -> type 0x%02x\n", cte->type);
5836 static struct dcb_entry *new_dcb_entry(struct dcb_table *dcb)
5838 struct dcb_entry *entry = &dcb->entry[dcb->entries];
5840 memset(entry, 0, sizeof(struct dcb_entry));
5841 entry->index = dcb->entries++;
5846 static void fabricate_vga_output(struct dcb_table *dcb, int i2c, int heads)
5848 struct dcb_entry *entry = new_dcb_entry(dcb);
5851 entry->i2c_index = i2c;
5852 entry->heads = heads;
5853 entry->location = DCB_LOC_ON_CHIP;
5854 /* "or" mostly unused in early gen crt modesetting, 0 is fine */
5857 static void fabricate_dvi_i_output(struct dcb_table *dcb, bool twoHeads)
5859 struct dcb_entry *entry = new_dcb_entry(dcb);
5862 entry->i2c_index = LEGACY_I2C_PANEL;
5863 entry->heads = twoHeads ? 3 : 1;
5864 entry->location = !DCB_LOC_ON_CHIP; /* ie OFF CHIP */
5865 entry->or = 1; /* means |0x10 gets set on CRE_LCD__INDEX */
5866 entry->duallink_possible = false; /* SiI164 and co. are single link */
5870 * For dvi-a either crtc probably works, but my card appears to only
5871 * support dvi-d. "nvidia" still attempts to program it for dvi-a,
5872 * doing the full fp output setup (program 0x6808.. fp dimension regs,
5873 * setting 0x680848 to 0x10000111 to enable, maybe setting 0x680880);
5874 * the monitor picks up the mode res ok and lights up, but no pixel
5875 * data appears, so the board manufacturer probably connected up the
5876 * sync lines, but missed the video traces / components
5878 * with this introduction, dvi-a left as an exercise for the reader.
5880 fabricate_vga_output(dcb, LEGACY_I2C_PANEL, entry->heads);
5884 static void fabricate_tv_output(struct dcb_table *dcb, bool twoHeads)
5886 struct dcb_entry *entry = new_dcb_entry(dcb);
5889 entry->i2c_index = LEGACY_I2C_TV;
5890 entry->heads = twoHeads ? 3 : 1;
5891 entry->location = !DCB_LOC_ON_CHIP; /* ie OFF CHIP */
5895 parse_dcb20_entry(struct drm_device *dev, struct dcb_table *dcb,
5896 uint32_t conn, uint32_t conf, struct dcb_entry *entry)
5898 entry->type = conn & 0xf;
5899 entry->i2c_index = (conn >> 4) & 0xf;
5900 entry->heads = (conn >> 8) & 0xf;
5901 if (dcb->version >= 0x40)
5902 entry->connector = (conn >> 12) & 0xf;
5903 entry->bus = (conn >> 16) & 0xf;
5904 entry->location = (conn >> 20) & 0x3;
5905 entry->or = (conn >> 24) & 0xf;
5907 switch (entry->type) {
5910 * Although the rest of a CRT conf dword is usually
5911 * zeros, mac biosen have stuff there so we must mask
5913 entry->crtconf.maxfreq = (dcb->version < 0x30) ?
5914 (conf & 0xffff) * 10 :
5915 (conf & 0xff) * 10000;
5921 entry->lvdsconf.use_straps_for_mode = true;
5922 if (dcb->version < 0x22) {
5925 * The laptop in bug 14567 lies and claims to not use
5926 * straps when it does, so assume all DCB 2.0 laptops
5927 * use straps, until a broken EDID using one is produced
5929 entry->lvdsconf.use_straps_for_mode = true;
5931 * Both 0x4 and 0x8 show up in v2.0 tables; assume they
5932 * mean the same thing (probably wrong, but might work)
5934 if (conf & 0x4 || conf & 0x8)
5935 entry->lvdsconf.use_power_scripts = true;
5939 entry->lvdsconf.use_acpi_for_edid = true;
5941 entry->lvdsconf.use_power_scripts = true;
5942 entry->lvdsconf.sor.link = (conf & 0x00000030) >> 4;
5946 * Until we even try to use these on G8x, it's
5947 * useless reporting unknown bits. They all are.
5949 if (dcb->version >= 0x40)
5952 NV_ERROR(dev, "Unknown LVDS configuration bits, "
5959 if (dcb->version >= 0x30)
5960 entry->tvconf.has_component_output = conf & (0x8 << 4);
5962 entry->tvconf.has_component_output = false;
5967 entry->dpconf.sor.link = (conf & 0x00000030) >> 4;
5968 entry->dpconf.link_bw = (conf & 0x00e00000) >> 21;
5969 switch ((conf & 0x0f000000) >> 24) {
5971 entry->dpconf.link_nr = 4;
5974 entry->dpconf.link_nr = 2;
5977 entry->dpconf.link_nr = 1;
5982 entry->tmdsconf.sor.link = (conf & 0x00000030) >> 4;
5985 /* weird g80 mobile type that "nv" treats as a terminator */
5992 if (dcb->version < 0x40) {
5993 /* Normal entries consist of a single bit, but dual link has
5994 * the next most significant bit set too
5996 entry->duallink_possible =
5997 ((1 << (ffs(entry->or) - 1)) * 3 == entry->or);
5999 entry->duallink_possible = (entry->sorconf.link == 3);
6002 /* unsure what DCB version introduces this, 3.0? */
6003 if (conf & 0x100000)
6004 entry->i2c_upper_default = true;
6010 parse_dcb15_entry(struct drm_device *dev, struct dcb_table *dcb,
6011 uint32_t conn, uint32_t conf, struct dcb_entry *entry)
6013 switch (conn & 0x0000000f) {
6015 entry->type = OUTPUT_ANALOG;
6018 entry->type = OUTPUT_TV;
6022 entry->type = OUTPUT_LVDS;
6025 switch ((conn & 0x000000f0) >> 4) {
6027 entry->type = OUTPUT_TMDS;
6030 entry->type = OUTPUT_LVDS;
6033 NV_ERROR(dev, "Unknown DCB subtype 4/%d\n",
6034 (conn & 0x000000f0) >> 4);
6039 NV_ERROR(dev, "Unknown DCB type %d\n", conn & 0x0000000f);
6043 entry->i2c_index = (conn & 0x0003c000) >> 14;
6044 entry->heads = ((conn & 0x001c0000) >> 18) + 1;
6045 entry->or = entry->heads; /* same as heads, hopefully safe enough */
6046 entry->location = (conn & 0x01e00000) >> 21;
6047 entry->bus = (conn & 0x0e000000) >> 25;
6048 entry->duallink_possible = false;
6050 switch (entry->type) {
6052 entry->crtconf.maxfreq = (conf & 0xffff) * 10;
6055 entry->tvconf.has_component_output = false;
6058 if ((conn & 0x00003f00) != 0x10)
6059 entry->lvdsconf.use_straps_for_mode = true;
6060 entry->lvdsconf.use_power_scripts = true;
6069 static bool parse_dcb_entry(struct drm_device *dev, struct dcb_table *dcb,
6070 uint32_t conn, uint32_t conf)
6072 struct dcb_entry *entry = new_dcb_entry(dcb);
6075 if (dcb->version >= 0x20)
6076 ret = parse_dcb20_entry(dev, dcb, conn, conf, entry);
6078 ret = parse_dcb15_entry(dev, dcb, conn, conf, entry);
6082 read_dcb_i2c_entry(dev, dcb->version, dcb->i2c_table,
6083 entry->i2c_index, &dcb->i2c[entry->i2c_index]);
6089 void merge_like_dcb_entries(struct drm_device *dev, struct dcb_table *dcb)
6092 * DCB v2.0 lists each output combination separately.
6093 * Here we merge compatible entries to have fewer outputs, with
6097 int i, newentries = 0;
6099 for (i = 0; i < dcb->entries; i++) {
6100 struct dcb_entry *ient = &dcb->entry[i];
6103 for (j = i + 1; j < dcb->entries; j++) {
6104 struct dcb_entry *jent = &dcb->entry[j];
6106 if (jent->type == 100) /* already merged entry */
6109 /* merge heads field when all other fields the same */
6110 if (jent->i2c_index == ient->i2c_index &&
6111 jent->type == ient->type &&
6112 jent->location == ient->location &&
6113 jent->or == ient->or) {
6114 NV_TRACE(dev, "Merging DCB entries %d and %d\n",
6116 ient->heads |= jent->heads;
6117 jent->type = 100; /* dummy value */
6122 /* Compact entries merged into others out of dcb */
6123 for (i = 0; i < dcb->entries; i++) {
6124 if (dcb->entry[i].type == 100)
6127 if (newentries != i) {
6128 dcb->entry[newentries] = dcb->entry[i];
6129 dcb->entry[newentries].index = newentries;
6134 dcb->entries = newentries;
6138 apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf)
6140 /* Dell Precision M6300
6141 * DCB entry 2: 02025312 00000010
6142 * DCB entry 3: 02026312 00000020
6144 * Identical, except apparently a different connector on a
6145 * different SOR link. Not a clue how we're supposed to know
6146 * which one is in use if it even shares an i2c line...
6148 * Ignore the connector on the second SOR link to prevent
6149 * nasty problems until this is sorted (assuming it's not a
6152 if ((dev->pdev->device == 0x040d) &&
6153 (dev->pdev->subsystem_vendor == 0x1028) &&
6154 (dev->pdev->subsystem_device == 0x019b)) {
6155 if (*conn == 0x02026312 && *conf == 0x00000020)
6163 parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
6165 struct drm_nouveau_private *dev_priv = dev->dev_private;
6166 struct dcb_table *dcb = &bios->dcb;
6167 uint16_t dcbptr = 0, i2ctabptr = 0;
6169 uint8_t headerlen = 0x4, entries = DCB_MAX_NUM_ENTRIES;
6170 bool configblock = true;
6171 int recordlength = 8, confofs = 4;
6174 /* get the offset from 0x36 */
6175 if (dev_priv->card_type > NV_04) {
6176 dcbptr = ROM16(bios->data[0x36]);
6177 if (dcbptr == 0x0000)
6178 NV_WARN(dev, "No output data (DCB) found in BIOS\n");
6181 /* this situation likely means a really old card, pre DCB */
6182 if (dcbptr == 0x0) {
6183 NV_INFO(dev, "Assuming a CRT output exists\n");
6184 fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
6186 if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
6187 fabricate_tv_output(dcb, twoHeads);
6192 dcbtable = &bios->data[dcbptr];
6194 /* get DCB version */
6195 dcb->version = dcbtable[0];
6196 NV_TRACE(dev, "Found Display Configuration Block version %d.%d\n",
6197 dcb->version >> 4, dcb->version & 0xf);
6199 if (dcb->version >= 0x20) { /* NV17+ */
6202 if (dcb->version >= 0x30) { /* NV40+ */
6203 headerlen = dcbtable[1];
6204 entries = dcbtable[2];
6205 recordlength = dcbtable[3];
6206 i2ctabptr = ROM16(dcbtable[4]);
6207 sig = ROM32(dcbtable[6]);
6208 dcb->gpio_table_ptr = ROM16(dcbtable[10]);
6209 dcb->connector_table_ptr = ROM16(dcbtable[20]);
6211 i2ctabptr = ROM16(dcbtable[2]);
6212 sig = ROM32(dcbtable[4]);
6216 if (sig != 0x4edcbdcb) {
6217 NV_ERROR(dev, "Bad Display Configuration Block "
6218 "signature (%08X)\n", sig);
6221 } else if (dcb->version >= 0x15) { /* some NV11 and NV20 */
6222 char sig[8] = { 0 };
6224 strncpy(sig, (char *)&dcbtable[-7], 7);
6225 i2ctabptr = ROM16(dcbtable[2]);
6229 if (strcmp(sig, "DEV_REC")) {
6230 NV_ERROR(dev, "Bad Display Configuration Block "
6231 "signature (%s)\n", sig);
6236 * v1.4 (some NV15/16, NV11+) seems the same as v1.5, but always
6237 * has the same single (crt) entry, even when tv-out present, so
6238 * the conclusion is this version cannot really be used.
6239 * v1.2 tables (some NV6/10, and NV15+) normally have the same
6240 * 5 entries, which are not specific to the card and so no use.
6241 * v1.2 does have an I2C table that read_dcb_i2c_table can
6242 * handle, but cards exist (nv11 in #14821) with a bad i2c table
6243 * pointer, so use the indices parsed in parse_bmp_structure.
6244 * v1.1 (NV5+, maybe some NV4) is entirely unhelpful
6246 NV_TRACEWARN(dev, "No useful information in BIOS output table; "
6247 "adding all possible outputs\n");
6248 fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
6251 * Attempt to detect TV before DVI because the test
6252 * for the former is more accurate and it rules the
6255 if (nv04_tv_identify(dev,
6256 bios->legacy.i2c_indices.tv) >= 0)
6257 fabricate_tv_output(dcb, twoHeads);
6259 else if (bios->tmds.output0_script_ptr ||
6260 bios->tmds.output1_script_ptr)
6261 fabricate_dvi_i_output(dcb, twoHeads);
6267 NV_WARN(dev, "No pointer to DCB I2C port table\n");
6269 dcb->i2c_table = &bios->data[i2ctabptr];
6270 if (dcb->version >= 0x30)
6271 dcb->i2c_default_indices = dcb->i2c_table[4];
6274 if (entries > DCB_MAX_NUM_ENTRIES)
6275 entries = DCB_MAX_NUM_ENTRIES;
6277 for (i = 0; i < entries; i++) {
6278 uint32_t connection, config = 0;
6280 connection = ROM32(dcbtable[headerlen + recordlength * i]);
6282 config = ROM32(dcbtable[headerlen + confofs + recordlength * i]);
6284 /* seen on an NV11 with DCB v1.5 */
6285 if (connection == 0x00000000)
6288 /* seen on an NV17 with DCB v2.0 */
6289 if (connection == 0xffffffff)
6292 if ((connection & 0x0000000f) == 0x0000000f)
6295 if (!apply_dcb_encoder_quirks(dev, i, &connection, &config))
6298 NV_TRACEWARN(dev, "Raw DCB entry %d: %08x %08x\n",
6299 dcb->entries, connection, config);
6301 if (!parse_dcb_entry(dev, dcb, connection, config))
6306 * apart for v2.1+ not being known for requiring merging, this
6307 * guarantees dcbent->index is the index of the entry in the rom image
6309 if (dcb->version < 0x21)
6310 merge_like_dcb_entries(dev, dcb);
6315 parse_dcb_gpio_table(bios);
6316 parse_dcb_connector_table(bios);
6321 fixup_legacy_connector(struct nvbios *bios)
6323 struct dcb_table *dcb = &bios->dcb;
6324 int i, i2c, i2c_conn[DCB_MAX_NUM_I2C_ENTRIES] = { };
6327 * DCB 3.0 also has the table in most cases, but there are some cards
6328 * where the table is filled with stub entries, and the DCB entriy
6329 * indices are all 0. We don't need the connector indices on pre-G80
6330 * chips (yet?) so limit the use to DCB 4.0 and above.
6332 if (dcb->version >= 0x40)
6335 dcb->connector.entries = 0;
6338 * No known connector info before v3.0, so make it up. the rule here
6339 * is: anything on the same i2c bus is considered to be on the same
6340 * connector. any output without an associated i2c bus is assigned
6341 * its own unique connector index.
6343 for (i = 0; i < dcb->entries; i++) {
6345 * Ignore the I2C index for on-chip TV-out, as there
6346 * are cards with bogus values (nv31m in bug 23212),
6347 * and it's otherwise useless.
6349 if (dcb->entry[i].type == OUTPUT_TV &&
6350 dcb->entry[i].location == DCB_LOC_ON_CHIP)
6351 dcb->entry[i].i2c_index = 0xf;
6352 i2c = dcb->entry[i].i2c_index;
6354 if (i2c_conn[i2c]) {
6355 dcb->entry[i].connector = i2c_conn[i2c] - 1;
6359 dcb->entry[i].connector = dcb->connector.entries++;
6361 i2c_conn[i2c] = dcb->connector.entries;
6364 /* Fake the connector table as well as just connector indices */
6365 for (i = 0; i < dcb->connector.entries; i++) {
6366 dcb->connector.entry[i].index = i;
6367 dcb->connector.entry[i].type = divine_connector_type(bios, i);
6368 dcb->connector.entry[i].gpio_tag = 0xff;
6373 fixup_legacy_i2c(struct nvbios *bios)
6375 struct dcb_table *dcb = &bios->dcb;
6378 for (i = 0; i < dcb->entries; i++) {
6379 if (dcb->entry[i].i2c_index == LEGACY_I2C_CRT)
6380 dcb->entry[i].i2c_index = bios->legacy.i2c_indices.crt;
6381 if (dcb->entry[i].i2c_index == LEGACY_I2C_PANEL)
6382 dcb->entry[i].i2c_index = bios->legacy.i2c_indices.panel;
6383 if (dcb->entry[i].i2c_index == LEGACY_I2C_TV)
6384 dcb->entry[i].i2c_index = bios->legacy.i2c_indices.tv;
6388 static int load_nv17_hwsq_ucode_entry(struct drm_device *dev, struct nvbios *bios, uint16_t hwsq_offset, int entry)
6391 * The header following the "HWSQ" signature has the number of entries,
6392 * and the entry size
6394 * An entry consists of a dword to write to the sequencer control reg
6395 * (0x00001304), followed by the ucode bytes, written sequentially,
6396 * starting at reg 0x00001400
6399 uint8_t bytes_to_write;
6400 uint16_t hwsq_entry_offset;
6403 if (bios->data[hwsq_offset] <= entry) {
6404 NV_ERROR(dev, "Too few entries in HW sequencer table for "
6405 "requested entry\n");
6409 bytes_to_write = bios->data[hwsq_offset + 1];
6411 if (bytes_to_write != 36) {
6412 NV_ERROR(dev, "Unknown HW sequencer entry size\n");
6416 NV_TRACE(dev, "Loading NV17 power sequencing microcode\n");
6418 hwsq_entry_offset = hwsq_offset + 2 + entry * bytes_to_write;
6420 /* set sequencer control */
6421 bios_wr32(bios, 0x00001304, ROM32(bios->data[hwsq_entry_offset]));
6422 bytes_to_write -= 4;
6425 for (i = 0; i < bytes_to_write; i += 4)
6426 bios_wr32(bios, 0x00001400 + i, ROM32(bios->data[hwsq_entry_offset + i + 4]));
6428 /* twiddle NV_PBUS_DEBUG_4 */
6429 bios_wr32(bios, NV_PBUS_DEBUG_4, bios_rd32(bios, NV_PBUS_DEBUG_4) | 0x18);
6434 static int load_nv17_hw_sequencer_ucode(struct drm_device *dev,
6435 struct nvbios *bios)
6438 * BMP based cards, from NV17, need a microcode loading to correctly
6439 * control the GPIO etc for LVDS panels
6441 * BIT based cards seem to do this directly in the init scripts
6443 * The microcode entries are found by the "HWSQ" signature.
6446 const uint8_t hwsq_signature[] = { 'H', 'W', 'S', 'Q' };
6447 const int sz = sizeof(hwsq_signature);
6450 hwsq_offset = findstr(bios->data, bios->length, hwsq_signature, sz);
6454 /* always use entry 0? */
6455 return load_nv17_hwsq_ucode_entry(dev, bios, hwsq_offset + sz, 0);
6458 uint8_t *nouveau_bios_embedded_edid(struct drm_device *dev)
6460 struct drm_nouveau_private *dev_priv = dev->dev_private;
6461 struct nvbios *bios = &dev_priv->vbios;
6462 const uint8_t edid_sig[] = {
6463 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
6464 uint16_t offset = 0;
6466 int searchlen = NV_PROM_SIZE;
6469 return bios->fp.edid;
6472 newoffset = findstr(&bios->data[offset], searchlen,
6476 offset += newoffset;
6477 if (!nv_cksum(&bios->data[offset], EDID1_LEN))
6480 searchlen -= offset;
6484 NV_TRACE(dev, "Found EDID in BIOS\n");
6486 return bios->fp.edid = &bios->data[offset];
6490 nouveau_bios_run_init_table(struct drm_device *dev, uint16_t table,
6491 struct dcb_entry *dcbent)
6493 struct drm_nouveau_private *dev_priv = dev->dev_private;
6494 struct nvbios *bios = &dev_priv->vbios;
6495 struct init_exec iexec = { true, false };
6497 mutex_lock(&bios->lock);
6498 bios->display.output = dcbent;
6499 parse_init_table(bios, table, &iexec);
6500 bios->display.output = NULL;
6501 mutex_unlock(&bios->lock);
6504 static bool NVInitVBIOS(struct drm_device *dev)
6506 struct drm_nouveau_private *dev_priv = dev->dev_private;
6507 struct nvbios *bios = &dev_priv->vbios;
6509 memset(bios, 0, sizeof(struct nvbios));
6510 mutex_init(&bios->lock);
6513 if (!NVShadowVBIOS(dev, bios->data))
6516 bios->length = NV_PROM_SIZE;
6520 static int nouveau_parse_vbios_struct(struct drm_device *dev)
6522 struct drm_nouveau_private *dev_priv = dev->dev_private;
6523 struct nvbios *bios = &dev_priv->vbios;
6524 const uint8_t bit_signature[] = { 0xff, 0xb8, 'B', 'I', 'T' };
6525 const uint8_t bmp_signature[] = { 0xff, 0x7f, 'N', 'V', 0x0 };
6528 offset = findstr(bios->data, bios->length,
6529 bit_signature, sizeof(bit_signature));
6531 NV_TRACE(dev, "BIT BIOS found\n");
6532 return parse_bit_structure(bios, offset + 6);
6535 offset = findstr(bios->data, bios->length,
6536 bmp_signature, sizeof(bmp_signature));
6538 NV_TRACE(dev, "BMP BIOS found\n");
6539 return parse_bmp_structure(dev, bios, offset);
6542 NV_ERROR(dev, "No known BIOS signature found\n");
6547 nouveau_run_vbios_init(struct drm_device *dev)
6549 struct drm_nouveau_private *dev_priv = dev->dev_private;
6550 struct nvbios *bios = &dev_priv->vbios;
6553 NVLockVgaCrtcs(dev, false);
6554 if (nv_two_heads(dev))
6555 NVSetOwner(dev, bios->state.crtchead);
6557 if (bios->major_version < 5) /* BMP only */
6558 load_nv17_hw_sequencer_ucode(dev, bios);
6560 if (bios->execute) {
6561 bios->fp.last_script_invoc = 0;
6562 bios->fp.lvds_init_run = false;
6565 parse_init_tables(bios);
6568 * Runs some additional script seen on G8x VBIOSen. The VBIOS'
6569 * parser will run this right after the init tables, the binary
6570 * driver appears to run it at some point later.
6572 if (bios->some_script_ptr) {
6573 struct init_exec iexec = {true, false};
6575 NV_INFO(dev, "Parsing VBIOS init table at offset 0x%04X\n",
6576 bios->some_script_ptr);
6577 parse_init_table(bios, bios->some_script_ptr, &iexec);
6580 if (dev_priv->card_type >= NV_50) {
6581 for (i = 0; i < bios->dcb.entries; i++) {
6582 nouveau_bios_run_display_table(dev,
6583 &bios->dcb.entry[i],
6588 NVLockVgaCrtcs(dev, true);
6594 nouveau_bios_i2c_devices_takedown(struct drm_device *dev)
6596 struct drm_nouveau_private *dev_priv = dev->dev_private;
6597 struct nvbios *bios = &dev_priv->vbios;
6598 struct dcb_i2c_entry *entry;
6601 entry = &bios->dcb.i2c[0];
6602 for (i = 0; i < DCB_MAX_NUM_I2C_ENTRIES; i++, entry++)
6603 nouveau_i2c_fini(dev, entry);
6607 nouveau_bios_posted(struct drm_device *dev)
6609 struct drm_nouveau_private *dev_priv = dev->dev_private;
6612 if (dev_priv->chipset >= NV_50) {
6613 if (NVReadVgaCrtc(dev, 0, 0x00) == 0 &&
6614 NVReadVgaCrtc(dev, 0, 0x1a) == 0)
6619 NVLockVgaCrtcs(dev, false);
6620 htotal = NVReadVgaCrtc(dev, 0, 0x06);
6621 htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x01) << 8;
6622 htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x20) << 4;
6623 htotal |= (NVReadVgaCrtc(dev, 0, 0x25) & 0x01) << 10;
6624 htotal |= (NVReadVgaCrtc(dev, 0, 0x41) & 0x01) << 11;
6625 NVLockVgaCrtcs(dev, true);
6627 return (htotal != 0);
6631 nouveau_bios_init(struct drm_device *dev)
6633 struct drm_nouveau_private *dev_priv = dev->dev_private;
6634 struct nvbios *bios = &dev_priv->vbios;
6637 if (!NVInitVBIOS(dev))
6640 ret = nouveau_parse_vbios_struct(dev);
6644 ret = parse_dcb_table(dev, bios, nv_two_heads(dev));
6648 fixup_legacy_i2c(bios);
6649 fixup_legacy_connector(bios);
6651 if (!bios->major_version) /* we don't run version 0 bios */
6654 /* init script execution disabled */
6655 bios->execute = false;
6657 /* ... unless card isn't POSTed already */
6658 if (!nouveau_bios_posted(dev)) {
6659 NV_INFO(dev, "Adaptor not initialised, "
6660 "running VBIOS init tables.\n");
6661 bios->execute = true;
6664 ret = nouveau_run_vbios_init(dev);
6668 /* feature_byte on BMP is poor, but init always sets CR4B */
6669 NVLockVgaCrtcs(dev, false);
6670 if (bios->major_version < 5)
6671 bios->is_mobile = NVReadVgaCrtc(dev, 0, NV_CIO_CRE_4B) & 0x40;
6673 /* all BIT systems need p_f_m_t for digital_min_front_porch */
6674 if (bios->is_mobile || bios->major_version >= 5)
6675 ret = parse_fp_mode_table(dev, bios);
6676 NVLockVgaCrtcs(dev, true);
6678 /* allow subsequent scripts to execute */
6679 bios->execute = true;
6685 nouveau_bios_takedown(struct drm_device *dev)
6687 nouveau_bios_i2c_devices_takedown(dev);