2 * Copyright 2005-2006 Erik Waling
3 * Copyright 2006 Stephane Marchesin
4 * Copyright 2007-2009 Stuart Bennett
6 * Permission is hereby granted, free of charge, to any person obtaining a
7 * copy of this software and associated documentation files (the "Software"),
8 * to deal in the Software without restriction, including without limitation
9 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
10 * and/or sell copies of the Software, and to permit persons to whom the
11 * Software is furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
20 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
21 * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
26 #define NV_DEBUG_NOTRACE
27 #include "nouveau_drv.h"
28 #include "nouveau_hw.h"
29 #include "nouveau_encoder.h"
31 /* these defines are made up */
32 #define NV_CIO_CRE_44_HEADA 0x0
33 #define NV_CIO_CRE_44_HEADB 0x3
34 #define FEATURE_MOBILE 0x10 /* also FEATURE_QUADRO for BMP */
35 #define LEGACY_I2C_CRT 0x80
36 #define LEGACY_I2C_PANEL 0x81
37 #define LEGACY_I2C_TV 0x82
41 #define BIOSLOG(sip, fmt, arg...) NV_DEBUG(sip->dev, fmt, ##arg)
42 #define LOG_OLD_VALUE(x)
44 #define ROM16(x) le16_to_cpu(*(uint16_t *)&(x))
45 #define ROM32(x) le32_to_cpu(*(uint32_t *)&(x))
52 static bool nv_cksum(const uint8_t *data, unsigned int length)
55 * There's a few checksums in the BIOS, so here's a generic checking
61 for (i = 0; i < length; i++)
71 score_vbios(struct drm_device *dev, const uint8_t *data, const bool writeable)
73 if (!(data[0] == 0x55 && data[1] == 0xAA)) {
74 NV_TRACEWARN(dev, "... BIOS signature not found\n");
78 if (nv_cksum(data, data[2] * 512)) {
79 NV_TRACEWARN(dev, "... BIOS checksum invalid\n");
80 /* if a ro image is somewhat bad, it's probably all rubbish */
81 return writeable ? 2 : 1;
83 NV_TRACE(dev, "... appears to be valid\n");
88 static void load_vbios_prom(struct drm_device *dev, uint8_t *data)
90 struct drm_nouveau_private *dev_priv = dev->dev_private;
91 uint32_t pci_nv_20, save_pci_nv_20;
95 if (dev_priv->card_type >= NV_50)
98 pci_nv_20 = NV_PBUS_PCI_NV_20;
100 /* enable ROM access */
101 save_pci_nv_20 = nvReadMC(dev, pci_nv_20);
102 nvWriteMC(dev, pci_nv_20,
103 save_pci_nv_20 & ~NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED);
105 /* bail if no rom signature */
106 if (nv_rd08(dev, NV_PROM_OFFSET) != 0x55 ||
107 nv_rd08(dev, NV_PROM_OFFSET + 1) != 0xaa)
110 /* additional check (see note below) - read PCI record header */
111 pcir_ptr = nv_rd08(dev, NV_PROM_OFFSET + 0x18) |
112 nv_rd08(dev, NV_PROM_OFFSET + 0x19) << 8;
113 if (nv_rd08(dev, NV_PROM_OFFSET + pcir_ptr) != 'P' ||
114 nv_rd08(dev, NV_PROM_OFFSET + pcir_ptr + 1) != 'C' ||
115 nv_rd08(dev, NV_PROM_OFFSET + pcir_ptr + 2) != 'I' ||
116 nv_rd08(dev, NV_PROM_OFFSET + pcir_ptr + 3) != 'R')
119 /* on some 6600GT/6800LE prom reads are messed up. nvclock alleges a
120 * a good read may be obtained by waiting or re-reading (cargocult: 5x)
121 * each byte. we'll hope pramin has something usable instead
123 for (i = 0; i < NV_PROM_SIZE; i++)
124 data[i] = nv_rd08(dev, NV_PROM_OFFSET + i);
127 /* disable ROM access */
128 nvWriteMC(dev, pci_nv_20,
129 save_pci_nv_20 | NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED);
132 static void load_vbios_pramin(struct drm_device *dev, uint8_t *data)
134 struct drm_nouveau_private *dev_priv = dev->dev_private;
135 uint32_t old_bar0_pramin = 0;
138 if (dev_priv->card_type >= NV_50) {
139 uint32_t vbios_vram = (nv_rd32(dev, 0x619f04) & ~0xff) << 8;
142 vbios_vram = (nv_rd32(dev, 0x1700) << 16) + 0xf0000;
144 old_bar0_pramin = nv_rd32(dev, 0x1700);
145 nv_wr32(dev, 0x1700, vbios_vram >> 16);
148 /* bail if no rom signature */
149 if (nv_rd08(dev, NV_PRAMIN_OFFSET) != 0x55 ||
150 nv_rd08(dev, NV_PRAMIN_OFFSET + 1) != 0xaa)
153 for (i = 0; i < NV_PROM_SIZE; i++)
154 data[i] = nv_rd08(dev, NV_PRAMIN_OFFSET + i);
157 if (dev_priv->card_type >= NV_50)
158 nv_wr32(dev, 0x1700, old_bar0_pramin);
161 static void load_vbios_pci(struct drm_device *dev, uint8_t *data)
163 void __iomem *rom = NULL;
167 ret = pci_enable_rom(dev->pdev);
171 rom = pci_map_rom(dev->pdev, &rom_len);
174 memcpy_fromio(data, rom, rom_len);
175 pci_unmap_rom(dev->pdev, rom);
178 pci_disable_rom(dev->pdev);
183 void (*loadbios)(struct drm_device *, uint8_t *);
187 static struct methods nv04_methods[] = {
188 { "PROM", load_vbios_prom, false },
189 { "PRAMIN", load_vbios_pramin, true },
190 { "PCIROM", load_vbios_pci, true },
193 static struct methods nv50_methods[] = {
194 { "PRAMIN", load_vbios_pramin, true },
195 { "PROM", load_vbios_prom, false },
196 { "PCIROM", load_vbios_pci, true },
201 static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
203 struct drm_nouveau_private *dev_priv = dev->dev_private;
204 struct methods *methods;
207 int scores[METHODCNT];
210 methods = nv04_methods;
211 for (i = 0; i < METHODCNT; i++)
212 if (!strcasecmp(nouveau_vbios, methods[i].desc))
216 NV_INFO(dev, "Attempting to use BIOS image from %s\n",
219 methods[i].loadbios(dev, data);
220 if (score_vbios(dev, data, methods[i].rw))
224 NV_ERROR(dev, "VBIOS source \'%s\' invalid\n", nouveau_vbios);
227 if (dev_priv->card_type < NV_50)
228 methods = nv04_methods;
230 methods = nv50_methods;
232 for (i = 0; i < METHODCNT; i++) {
233 NV_TRACE(dev, "Attempting to load BIOS image from %s\n",
235 data[0] = data[1] = 0; /* avoid reuse of previous image */
236 methods[i].loadbios(dev, data);
237 scores[i] = score_vbios(dev, data, methods[i].rw);
238 if (scores[i] == testscore)
242 while (--testscore > 0) {
243 for (i = 0; i < METHODCNT; i++) {
244 if (scores[i] == testscore) {
245 NV_TRACE(dev, "Using BIOS image from %s\n",
247 methods[i].loadbios(dev, data);
253 NV_ERROR(dev, "No valid BIOS image found\n");
257 struct init_tbl_entry {
261 * > 0: success, length of opcode
262 * 0: success, but abort further parsing of table (INIT_DONE etc)
263 * < 0: failure, table parsing will be aborted
265 int (*handler)(struct nvbios *, uint16_t, struct init_exec *);
274 static int parse_init_table(struct nvbios *, unsigned int, struct init_exec *);
276 #define MACRO_INDEX_SIZE 2
278 #define CONDITION_SIZE 12
279 #define IO_FLAG_CONDITION_SIZE 9
280 #define IO_CONDITION_SIZE 5
281 #define MEM_INIT_SIZE 66
283 static void still_alive(void)
292 munge_reg(struct nvbios *bios, uint32_t reg)
294 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
295 struct dcb_entry *dcbent = bios->display.output;
297 if (dev_priv->card_type < NV_50)
300 if (reg & 0x40000000) {
303 reg += (ffs(dcbent->or) - 1) * 0x800;
304 if ((reg & 0x20000000) && !(dcbent->sorconf.link & 1))
313 valid_reg(struct nvbios *bios, uint32_t reg)
315 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
316 struct drm_device *dev = bios->dev;
318 /* C51 has misaligned regs on purpose. Marvellous */
320 (reg & 0x1 && dev_priv->vbios.chip_version != 0x51))
321 NV_ERROR(dev, "======= misaligned reg 0x%08X =======\n", reg);
323 /* warn on C51 regs that haven't been verified accessible in tracing */
324 if (reg & 0x1 && dev_priv->vbios.chip_version == 0x51 &&
325 reg != 0x130d && reg != 0x1311 && reg != 0x60081d)
326 NV_WARN(dev, "=== C51 misaligned reg 0x%08X not verified ===\n",
329 if (reg >= (8*1024*1024)) {
330 NV_ERROR(dev, "=== reg 0x%08x out of mapped bounds ===\n", reg);
338 valid_idx_port(struct nvbios *bios, uint16_t port)
340 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
341 struct drm_device *dev = bios->dev;
344 * If adding more ports here, the read/write functions below will need
345 * updating so that the correct mmio range (PRMCIO, PRMDIO, PRMVIO) is
346 * used for the port in question
348 if (dev_priv->card_type < NV_50) {
349 if (port == NV_CIO_CRX__COLOR)
351 if (port == NV_VIO_SRX)
354 if (port == NV_CIO_CRX__COLOR)
358 NV_ERROR(dev, "========== unknown indexed io port 0x%04X ==========\n",
365 valid_port(struct nvbios *bios, uint16_t port)
367 struct drm_device *dev = bios->dev;
370 * If adding more ports here, the read/write functions below will need
371 * updating so that the correct mmio range (PRMCIO, PRMDIO, PRMVIO) is
372 * used for the port in question
374 if (port == NV_VIO_VSE2)
377 NV_ERROR(dev, "========== unknown io port 0x%04X ==========\n", port);
383 bios_rd32(struct nvbios *bios, uint32_t reg)
387 reg = munge_reg(bios, reg);
388 if (!valid_reg(bios, reg))
392 * C51 sometimes uses regs with bit0 set in the address. For these
393 * cases there should exist a translation in a BIOS table to an IO
394 * port address which the BIOS uses for accessing the reg
396 * These only seem to appear for the power control regs to a flat panel,
397 * and the GPIO regs at 0x60081*. In C51 mmio traces the normal regs
398 * for 0x1308 and 0x1310 are used - hence the mask below. An S3
399 * suspend-resume mmio trace from a C51 will be required to see if this
400 * is true for the power microcode in 0x14.., or whether the direct IO
401 * port access method is needed
406 data = nv_rd32(bios->dev, reg);
408 BIOSLOG(bios, " Read: Reg: 0x%08X, Data: 0x%08X\n", reg, data);
414 bios_wr32(struct nvbios *bios, uint32_t reg, uint32_t data)
416 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
418 reg = munge_reg(bios, reg);
419 if (!valid_reg(bios, reg))
422 /* see note in bios_rd32 */
426 LOG_OLD_VALUE(bios_rd32(bios, reg));
427 BIOSLOG(bios, " Write: Reg: 0x%08X, Data: 0x%08X\n", reg, data);
429 if (dev_priv->vbios.execute) {
431 nv_wr32(bios->dev, reg, data);
436 bios_idxprt_rd(struct nvbios *bios, uint16_t port, uint8_t index)
438 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
439 struct drm_device *dev = bios->dev;
442 if (!valid_idx_port(bios, port))
445 if (dev_priv->card_type < NV_50) {
446 if (port == NV_VIO_SRX)
447 data = NVReadVgaSeq(dev, bios->state.crtchead, index);
448 else /* assume NV_CIO_CRX__COLOR */
449 data = NVReadVgaCrtc(dev, bios->state.crtchead, index);
453 data32 = bios_rd32(bios, NV50_PDISPLAY_VGACRTC(index & ~3));
454 data = (data32 >> ((index & 3) << 3)) & 0xff;
457 BIOSLOG(bios, " Indexed IO read: Port: 0x%04X, Index: 0x%02X, "
458 "Head: 0x%02X, Data: 0x%02X\n",
459 port, index, bios->state.crtchead, data);
464 bios_idxprt_wr(struct nvbios *bios, uint16_t port, uint8_t index, uint8_t data)
466 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
467 struct drm_device *dev = bios->dev;
469 if (!valid_idx_port(bios, port))
473 * The current head is maintained in the nvbios member state.crtchead.
474 * We trap changes to CR44 and update the head variable and hence the
475 * register set written.
476 * As CR44 only exists on CRTC0, we update crtchead to head0 in advance
477 * of the write, and to head1 after the write
479 if (port == NV_CIO_CRX__COLOR && index == NV_CIO_CRE_44 &&
480 data != NV_CIO_CRE_44_HEADB)
481 bios->state.crtchead = 0;
483 LOG_OLD_VALUE(bios_idxprt_rd(bios, port, index));
484 BIOSLOG(bios, " Indexed IO write: Port: 0x%04X, Index: 0x%02X, "
485 "Head: 0x%02X, Data: 0x%02X\n",
486 port, index, bios->state.crtchead, data);
488 if (bios->execute && dev_priv->card_type < NV_50) {
490 if (port == NV_VIO_SRX)
491 NVWriteVgaSeq(dev, bios->state.crtchead, index, data);
492 else /* assume NV_CIO_CRX__COLOR */
493 NVWriteVgaCrtc(dev, bios->state.crtchead, index, data);
496 uint32_t data32, shift = (index & 3) << 3;
500 data32 = bios_rd32(bios, NV50_PDISPLAY_VGACRTC(index & ~3));
501 data32 &= ~(0xff << shift);
502 data32 |= (data << shift);
503 bios_wr32(bios, NV50_PDISPLAY_VGACRTC(index & ~3), data32);
506 if (port == NV_CIO_CRX__COLOR &&
507 index == NV_CIO_CRE_44 && data == NV_CIO_CRE_44_HEADB)
508 bios->state.crtchead = 1;
512 bios_port_rd(struct nvbios *bios, uint16_t port)
514 uint8_t data, head = bios->state.crtchead;
516 if (!valid_port(bios, port))
519 data = NVReadPRMVIO(bios->dev, head, NV_PRMVIO0_OFFSET + port);
521 BIOSLOG(bios, " IO read: Port: 0x%04X, Head: 0x%02X, Data: 0x%02X\n",
528 bios_port_wr(struct nvbios *bios, uint16_t port, uint8_t data)
530 int head = bios->state.crtchead;
532 if (!valid_port(bios, port))
535 LOG_OLD_VALUE(bios_port_rd(bios, port));
536 BIOSLOG(bios, " IO write: Port: 0x%04X, Head: 0x%02X, Data: 0x%02X\n",
543 NVWritePRMVIO(bios->dev, head, NV_PRMVIO0_OFFSET + port, data);
547 io_flag_condition_met(struct nvbios *bios, uint16_t offset, uint8_t cond)
550 * The IO flag condition entry has 2 bytes for the CRTC port; 1 byte
551 * for the CRTC index; 1 byte for the mask to apply to the value
552 * retrieved from the CRTC; 1 byte for the shift right to apply to the
553 * masked CRTC value; 2 bytes for the offset to the flag array, to
554 * which the shifted value is added; 1 byte for the mask applied to the
555 * value read from the flag array; and 1 byte for the value to compare
556 * against the masked byte from the flag table.
559 uint16_t condptr = bios->io_flag_condition_tbl_ptr + cond * IO_FLAG_CONDITION_SIZE;
560 uint16_t crtcport = ROM16(bios->data[condptr]);
561 uint8_t crtcindex = bios->data[condptr + 2];
562 uint8_t mask = bios->data[condptr + 3];
563 uint8_t shift = bios->data[condptr + 4];
564 uint16_t flagarray = ROM16(bios->data[condptr + 5]);
565 uint8_t flagarraymask = bios->data[condptr + 7];
566 uint8_t cmpval = bios->data[condptr + 8];
569 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
570 "Shift: 0x%02X, FlagArray: 0x%04X, FAMask: 0x%02X, "
572 offset, crtcport, crtcindex, mask, shift, flagarray, flagarraymask, cmpval);
574 data = bios_idxprt_rd(bios, crtcport, crtcindex);
576 data = bios->data[flagarray + ((data & mask) >> shift)];
577 data &= flagarraymask;
579 BIOSLOG(bios, "0x%04X: Checking if 0x%02X equals 0x%02X\n",
580 offset, data, cmpval);
582 return (data == cmpval);
586 bios_condition_met(struct nvbios *bios, uint16_t offset, uint8_t cond)
589 * The condition table entry has 4 bytes for the address of the
590 * register to check, 4 bytes for a mask to apply to the register and
591 * 4 for a test comparison value
594 uint16_t condptr = bios->condition_tbl_ptr + cond * CONDITION_SIZE;
595 uint32_t reg = ROM32(bios->data[condptr]);
596 uint32_t mask = ROM32(bios->data[condptr + 4]);
597 uint32_t cmpval = ROM32(bios->data[condptr + 8]);
600 BIOSLOG(bios, "0x%04X: Cond: 0x%02X, Reg: 0x%08X, Mask: 0x%08X\n",
601 offset, cond, reg, mask);
603 data = bios_rd32(bios, reg) & mask;
605 BIOSLOG(bios, "0x%04X: Checking if 0x%08X equals 0x%08X\n",
606 offset, data, cmpval);
608 return (data == cmpval);
612 io_condition_met(struct nvbios *bios, uint16_t offset, uint8_t cond)
615 * The IO condition entry has 2 bytes for the IO port address; 1 byte
616 * for the index to write to io_port; 1 byte for the mask to apply to
617 * the byte read from io_port+1; and 1 byte for the value to compare
618 * against the masked byte.
621 uint16_t condptr = bios->io_condition_tbl_ptr + cond * IO_CONDITION_SIZE;
622 uint16_t io_port = ROM16(bios->data[condptr]);
623 uint8_t port_index = bios->data[condptr + 2];
624 uint8_t mask = bios->data[condptr + 3];
625 uint8_t cmpval = bios->data[condptr + 4];
627 uint8_t data = bios_idxprt_rd(bios, io_port, port_index) & mask;
629 BIOSLOG(bios, "0x%04X: Checking if 0x%02X equals 0x%02X\n",
630 offset, data, cmpval);
632 return (data == cmpval);
636 nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk)
638 struct drm_nouveau_private *dev_priv = dev->dev_private;
639 uint32_t reg0 = nv_rd32(dev, reg + 0);
640 uint32_t reg1 = nv_rd32(dev, reg + 4);
641 struct nouveau_pll_vals pll;
642 struct pll_lims pll_limits;
645 ret = get_pll_limits(dev, reg, &pll_limits);
649 clk = nouveau_calc_pll_mnp(dev, &pll_limits, clk, &pll);
653 reg0 = (reg0 & 0xfff8ffff) | (pll.log2P << 16);
654 reg1 = (reg1 & 0xffff0000) | (pll.N1 << 8) | pll.M1;
656 if (dev_priv->vbios.execute) {
658 nv_wr32(dev, reg + 4, reg1);
659 nv_wr32(dev, reg + 0, reg0);
666 setPLL(struct nvbios *bios, uint32_t reg, uint32_t clk)
668 struct drm_device *dev = bios->dev;
669 struct drm_nouveau_private *dev_priv = dev->dev_private;
671 struct pll_lims pll_lim;
672 struct nouveau_pll_vals pllvals;
675 if (dev_priv->card_type >= NV_50)
676 return nv50_pll_set(dev, reg, clk);
678 /* high regs (such as in the mac g5 table) are not -= 4 */
679 ret = get_pll_limits(dev, reg > 0x405c ? reg : reg - 4, &pll_lim);
683 clk = nouveau_calc_pll_mnp(dev, &pll_lim, clk, &pllvals);
689 nouveau_hw_setpll(dev, reg, &pllvals);
695 static int dcb_entry_idx_from_crtchead(struct drm_device *dev)
697 struct drm_nouveau_private *dev_priv = dev->dev_private;
698 struct nvbios *bios = &dev_priv->vbios;
701 * For the results of this function to be correct, CR44 must have been
702 * set (using bios_idxprt_wr to set crtchead), CR58 set for CR57 = 0,
703 * and the DCB table parsed, before the script calling the function is
704 * run. run_digital_op_script is example of how to do such setup
707 uint8_t dcb_entry = NVReadVgaCrtc5758(dev, bios->state.crtchead, 0);
709 if (dcb_entry > bios->dcb.entries) {
710 NV_ERROR(dev, "CR58 doesn't have a valid DCB entry currently "
711 "(%02X)\n", dcb_entry);
712 dcb_entry = 0x7f; /* unused / invalid marker */
719 read_dcb_i2c_entry(struct drm_device *dev, int dcb_version, uint8_t *i2ctable, int index, struct dcb_i2c_entry *i2c)
721 uint8_t dcb_i2c_ver = dcb_version, headerlen = 0, entry_len = 4;
722 int i2c_entries = DCB_MAX_NUM_I2C_ENTRIES;
723 int recordoffset = 0, rdofs = 1, wrofs = 0;
724 uint8_t port_type = 0;
729 if (dcb_version >= 0x30) {
730 if (i2ctable[0] != dcb_version) /* necessary? */
732 "DCB I2C table version mismatch (%02X vs %02X)\n",
733 i2ctable[0], dcb_version);
734 dcb_i2c_ver = i2ctable[0];
735 headerlen = i2ctable[1];
736 if (i2ctable[2] <= DCB_MAX_NUM_I2C_ENTRIES)
737 i2c_entries = i2ctable[2];
740 "DCB I2C table has more entries than indexable "
741 "(%d entries, max %d)\n", i2ctable[2],
742 DCB_MAX_NUM_I2C_ENTRIES);
743 entry_len = i2ctable[3];
744 /* [4] is i2c_default_indices, read in parse_dcb_table() */
747 * It's your own fault if you call this function on a DCB 1.1 BIOS --
748 * the test below is for DCB 1.2
750 if (dcb_version < 0x14) {
758 if (index >= i2c_entries) {
759 NV_ERROR(dev, "DCB I2C index too big (%d >= %d)\n",
763 if (i2ctable[headerlen + entry_len * index + 3] == 0xff) {
764 NV_ERROR(dev, "DCB I2C entry invalid\n");
768 if (dcb_i2c_ver >= 0x30) {
769 port_type = i2ctable[headerlen + recordoffset + 3 + entry_len * index];
772 * Fixup for chips using same address offset for read and
775 if (port_type == 4) /* seen on C51 */
777 if (port_type >= 5) /* G80+ */
781 if (dcb_i2c_ver >= 0x40) {
782 if (port_type != 5 && port_type != 6)
783 NV_WARN(dev, "DCB I2C table has port type %d\n", port_type);
785 i2c->entry = ROM32(i2ctable[headerlen + recordoffset + entry_len * index]);
788 i2c->port_type = port_type;
789 i2c->read = i2ctable[headerlen + recordoffset + rdofs + entry_len * index];
790 i2c->write = i2ctable[headerlen + recordoffset + wrofs + entry_len * index];
795 static struct nouveau_i2c_chan *
796 init_i2c_device_find(struct drm_device *dev, int i2c_index)
798 struct drm_nouveau_private *dev_priv = dev->dev_private;
799 struct dcb_table *dcb = &dev_priv->vbios.dcb;
801 if (i2c_index == 0xff) {
802 /* note: dcb_entry_idx_from_crtchead needs pre-script set-up */
803 int idx = dcb_entry_idx_from_crtchead(dev), shift = 0;
804 int default_indices = dcb->i2c_default_indices;
806 if (idx != 0x7f && dcb->entry[idx].i2c_upper_default)
809 i2c_index = (default_indices >> shift) & 0xf;
811 if (i2c_index == 0x80) /* g80+ */
812 i2c_index = dcb->i2c_default_indices & 0xf;
814 if (i2c_index == 0x81)
815 i2c_index = (dcb->i2c_default_indices & 0xf0) >> 4;
817 if (i2c_index > DCB_MAX_NUM_I2C_ENTRIES) {
818 NV_ERROR(dev, "invalid i2c_index 0x%x\n", i2c_index);
822 /* Make sure i2c table entry has been parsed, it may not
823 * have been if this is a bus not referenced by a DCB encoder
825 read_dcb_i2c_entry(dev, dcb->version, dcb->i2c_table,
826 i2c_index, &dcb->i2c[i2c_index]);
828 return nouveau_i2c_find(dev, i2c_index);
832 get_tmds_index_reg(struct drm_device *dev, uint8_t mlv)
835 * For mlv < 0x80, it is an index into a table of TMDS base addresses.
836 * For mlv == 0x80 use the "or" value of the dcb_entry indexed by
837 * CR58 for CR57 = 0 to index a table of offsets to the basic
839 * For mlv == 0x81 use the "or" value of the dcb_entry indexed by
840 * CR58 for CR57 = 0 to index a table of offsets to the basic
841 * 0x6808b0 address, and then flip the offset by 8.
844 struct drm_nouveau_private *dev_priv = dev->dev_private;
845 struct nvbios *bios = &dev_priv->vbios;
846 const int pramdac_offset[13] = {
847 0, 0, 0x8, 0, 0x2000, 0, 0, 0, 0x2008, 0, 0, 0, 0x2000 };
848 const uint32_t pramdac_table[4] = {
849 0x6808b0, 0x6808b8, 0x6828b0, 0x6828b8 };
852 int dcb_entry, dacoffset;
854 /* note: dcb_entry_idx_from_crtchead needs pre-script set-up */
855 dcb_entry = dcb_entry_idx_from_crtchead(dev);
856 if (dcb_entry == 0x7f)
858 dacoffset = pramdac_offset[bios->dcb.entry[dcb_entry].or];
861 return 0x6808b0 + dacoffset;
863 if (mlv >= ARRAY_SIZE(pramdac_table)) {
864 NV_ERROR(dev, "Magic Lookup Value too big (%02X)\n",
868 return pramdac_table[mlv];
873 init_io_restrict_prog(struct nvbios *bios, uint16_t offset,
874 struct init_exec *iexec)
877 * INIT_IO_RESTRICT_PROG opcode: 0x32 ('2')
879 * offset (8 bit): opcode
880 * offset + 1 (16 bit): CRTC port
881 * offset + 3 (8 bit): CRTC index
882 * offset + 4 (8 bit): mask
883 * offset + 5 (8 bit): shift
884 * offset + 6 (8 bit): count
885 * offset + 7 (32 bit): register
886 * offset + 11 (32 bit): configuration 1
889 * Starting at offset + 11 there are "count" 32 bit values.
890 * To find out which value to use read index "CRTC index" on "CRTC
891 * port", AND this value with "mask" and then bit shift right "shift"
892 * bits. Read the appropriate value using this index and write to
896 uint16_t crtcport = ROM16(bios->data[offset + 1]);
897 uint8_t crtcindex = bios->data[offset + 3];
898 uint8_t mask = bios->data[offset + 4];
899 uint8_t shift = bios->data[offset + 5];
900 uint8_t count = bios->data[offset + 6];
901 uint32_t reg = ROM32(bios->data[offset + 7]);
904 int len = 11 + count * 4;
909 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
910 "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n",
911 offset, crtcport, crtcindex, mask, shift, count, reg);
913 config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift;
914 if (config > count) {
916 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
917 offset, config, count);
921 configval = ROM32(bios->data[offset + 11 + config * 4]);
923 BIOSLOG(bios, "0x%04X: Writing config %02X\n", offset, config);
925 bios_wr32(bios, reg, configval);
931 init_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
934 * INIT_REPEAT opcode: 0x33 ('3')
936 * offset (8 bit): opcode
937 * offset + 1 (8 bit): count
939 * Execute script following this opcode up to INIT_REPEAT_END
943 uint8_t count = bios->data[offset + 1];
946 /* no iexec->execute check by design */
948 BIOSLOG(bios, "0x%04X: Repeating following segment %d times\n",
951 iexec->repeat = true;
954 * count - 1, as the script block will execute once when we leave this
955 * opcode -- this is compatible with bios behaviour as:
956 * a) the block is always executed at least once, even if count == 0
957 * b) the bios interpreter skips to the op following INIT_END_REPEAT,
960 for (i = 0; i < count - 1; i++)
961 parse_init_table(bios, offset + 2, iexec);
963 iexec->repeat = false;
969 init_io_restrict_pll(struct nvbios *bios, uint16_t offset,
970 struct init_exec *iexec)
973 * INIT_IO_RESTRICT_PLL opcode: 0x34 ('4')
975 * offset (8 bit): opcode
976 * offset + 1 (16 bit): CRTC port
977 * offset + 3 (8 bit): CRTC index
978 * offset + 4 (8 bit): mask
979 * offset + 5 (8 bit): shift
980 * offset + 6 (8 bit): IO flag condition index
981 * offset + 7 (8 bit): count
982 * offset + 8 (32 bit): register
983 * offset + 12 (16 bit): frequency 1
986 * Starting at offset + 12 there are "count" 16 bit frequencies (10kHz).
987 * Set PLL register "register" to coefficients for frequency n,
988 * selected by reading index "CRTC index" of "CRTC port" ANDed with
989 * "mask" and shifted right by "shift".
991 * If "IO flag condition index" > 0, and condition met, double
992 * frequency before setting it.
995 uint16_t crtcport = ROM16(bios->data[offset + 1]);
996 uint8_t crtcindex = bios->data[offset + 3];
997 uint8_t mask = bios->data[offset + 4];
998 uint8_t shift = bios->data[offset + 5];
999 int8_t io_flag_condition_idx = bios->data[offset + 6];
1000 uint8_t count = bios->data[offset + 7];
1001 uint32_t reg = ROM32(bios->data[offset + 8]);
1004 int len = 12 + count * 2;
1006 if (!iexec->execute)
1009 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
1010 "Shift: 0x%02X, IO Flag Condition: 0x%02X, "
1011 "Count: 0x%02X, Reg: 0x%08X\n",
1012 offset, crtcport, crtcindex, mask, shift,
1013 io_flag_condition_idx, count, reg);
1015 config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift;
1016 if (config > count) {
1018 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
1019 offset, config, count);
1023 freq = ROM16(bios->data[offset + 12 + config * 2]);
1025 if (io_flag_condition_idx > 0) {
1026 if (io_flag_condition_met(bios, offset, io_flag_condition_idx)) {
1027 BIOSLOG(bios, "0x%04X: Condition fulfilled -- "
1028 "frequency doubled\n", offset);
1031 BIOSLOG(bios, "0x%04X: Condition not fulfilled -- "
1032 "frequency unchanged\n", offset);
1035 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Config: 0x%02X, Freq: %d0kHz\n",
1036 offset, reg, config, freq);
1038 setPLL(bios, reg, freq * 10);
1044 init_end_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1047 * INIT_END_REPEAT opcode: 0x36 ('6')
1049 * offset (8 bit): opcode
1051 * Marks the end of the block for INIT_REPEAT to repeat
1054 /* no iexec->execute check by design */
1057 * iexec->repeat flag necessary to go past INIT_END_REPEAT opcode when
1058 * we're not in repeat mode
1067 init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1070 * INIT_COPY opcode: 0x37 ('7')
1072 * offset (8 bit): opcode
1073 * offset + 1 (32 bit): register
1074 * offset + 5 (8 bit): shift
1075 * offset + 6 (8 bit): srcmask
1076 * offset + 7 (16 bit): CRTC port
1077 * offset + 9 (8 bit): CRTC index
1078 * offset + 10 (8 bit): mask
1080 * Read index "CRTC index" on "CRTC port", AND with "mask", OR with
1081 * (REGVAL("register") >> "shift" & "srcmask") and write-back to CRTC
1085 uint32_t reg = ROM32(bios->data[offset + 1]);
1086 uint8_t shift = bios->data[offset + 5];
1087 uint8_t srcmask = bios->data[offset + 6];
1088 uint16_t crtcport = ROM16(bios->data[offset + 7]);
1089 uint8_t crtcindex = bios->data[offset + 9];
1090 uint8_t mask = bios->data[offset + 10];
1094 if (!iexec->execute)
1097 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%02X, "
1098 "Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X\n",
1099 offset, reg, shift, srcmask, crtcport, crtcindex, mask);
1101 data = bios_rd32(bios, reg);
1106 data <<= (0x100 - shift);
1110 crtcdata = bios_idxprt_rd(bios, crtcport, crtcindex) & mask;
1111 crtcdata |= (uint8_t)data;
1112 bios_idxprt_wr(bios, crtcport, crtcindex, crtcdata);
1118 init_not(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1121 * INIT_NOT opcode: 0x38 ('8')
1123 * offset (8 bit): opcode
1125 * Invert the current execute / no-execute condition (i.e. "else")
1128 BIOSLOG(bios, "0x%04X: ------ Skipping following commands ------\n", offset);
1130 BIOSLOG(bios, "0x%04X: ------ Executing following commands ------\n", offset);
1132 iexec->execute = !iexec->execute;
1137 init_io_flag_condition(struct nvbios *bios, uint16_t offset,
1138 struct init_exec *iexec)
1141 * INIT_IO_FLAG_CONDITION opcode: 0x39 ('9')
1143 * offset (8 bit): opcode
1144 * offset + 1 (8 bit): condition number
1146 * Check condition "condition number" in the IO flag condition table.
1147 * If condition not met skip subsequent opcodes until condition is
1148 * inverted (INIT_NOT), or we hit INIT_RESUME
1151 uint8_t cond = bios->data[offset + 1];
1153 if (!iexec->execute)
1156 if (io_flag_condition_met(bios, offset, cond))
1157 BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
1159 BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
1160 iexec->execute = false;
1167 init_dp_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1170 * INIT_DP_CONDITION opcode: 0x3A ('')
1172 * offset (8 bit): opcode
1173 * offset + 1 (8 bit): "sub" opcode
1174 * offset + 2 (8 bit): unknown
1178 struct bit_displayport_encoder_table *dpe = NULL;
1179 struct dcb_entry *dcb = bios->display.output;
1180 struct drm_device *dev = bios->dev;
1181 uint8_t cond = bios->data[offset + 1];
1184 BIOSLOG(bios, "0x%04X: subop 0x%02X\n", offset, cond);
1186 if (!iexec->execute)
1189 dpe = nouveau_bios_dp_table(dev, dcb, &dummy);
1191 NV_ERROR(dev, "0x%04X: INIT_3A: no encoder table!!\n", offset);
1198 struct dcb_connector_table_entry *ent =
1199 &bios->dcb.connector.entry[dcb->connector];
1201 if (ent->type != DCB_CONNECTOR_eDP)
1202 iexec->execute = false;
1207 if (!(dpe->unknown & cond))
1208 iexec->execute = false;
1212 struct nouveau_i2c_chan *auxch;
1215 auxch = nouveau_i2c_find(dev, bios->display.output->i2c_index);
1219 ret = nouveau_dp_auxch(auxch, 9, 0xd, &cond, 1);
1224 iexec->execute = false;
1228 NV_WARN(dev, "0x%04X: unknown INIT_3A op: %d\n", offset, cond);
1233 BIOSLOG(bios, "0x%04X: continuing to execute\n", offset);
1235 BIOSLOG(bios, "0x%04X: skipping following commands\n", offset);
1241 init_op_3b(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1244 * INIT_3B opcode: 0x3B ('')
1246 * offset (8 bit): opcode
1247 * offset + 1 (8 bit): crtc index
1251 uint8_t or = ffs(bios->display.output->or) - 1;
1252 uint8_t index = bios->data[offset + 1];
1255 if (!iexec->execute)
1258 data = bios_idxprt_rd(bios, 0x3d4, index);
1259 bios_idxprt_wr(bios, 0x3d4, index, data & ~(1 << or));
1264 init_op_3c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1267 * INIT_3C opcode: 0x3C ('')
1269 * offset (8 bit): opcode
1270 * offset + 1 (8 bit): crtc index
1274 uint8_t or = ffs(bios->display.output->or) - 1;
1275 uint8_t index = bios->data[offset + 1];
1278 if (!iexec->execute)
1281 data = bios_idxprt_rd(bios, 0x3d4, index);
1282 bios_idxprt_wr(bios, 0x3d4, index, data | (1 << or));
1287 init_idx_addr_latched(struct nvbios *bios, uint16_t offset,
1288 struct init_exec *iexec)
1291 * INIT_INDEX_ADDRESS_LATCHED opcode: 0x49 ('I')
1293 * offset (8 bit): opcode
1294 * offset + 1 (32 bit): control register
1295 * offset + 5 (32 bit): data register
1296 * offset + 9 (32 bit): mask
1297 * offset + 13 (32 bit): data
1298 * offset + 17 (8 bit): count
1299 * offset + 18 (8 bit): address 1
1300 * offset + 19 (8 bit): data 1
1303 * For each of "count" address and data pairs, write "data n" to
1304 * "data register", read the current value of "control register",
1305 * and write it back once ANDed with "mask", ORed with "data",
1306 * and ORed with "address n"
1309 uint32_t controlreg = ROM32(bios->data[offset + 1]);
1310 uint32_t datareg = ROM32(bios->data[offset + 5]);
1311 uint32_t mask = ROM32(bios->data[offset + 9]);
1312 uint32_t data = ROM32(bios->data[offset + 13]);
1313 uint8_t count = bios->data[offset + 17];
1314 int len = 18 + count * 2;
1318 if (!iexec->execute)
1321 BIOSLOG(bios, "0x%04X: ControlReg: 0x%08X, DataReg: 0x%08X, "
1322 "Mask: 0x%08X, Data: 0x%08X, Count: 0x%02X\n",
1323 offset, controlreg, datareg, mask, data, count);
1325 for (i = 0; i < count; i++) {
1326 uint8_t instaddress = bios->data[offset + 18 + i * 2];
1327 uint8_t instdata = bios->data[offset + 19 + i * 2];
1329 BIOSLOG(bios, "0x%04X: Address: 0x%02X, Data: 0x%02X\n",
1330 offset, instaddress, instdata);
1332 bios_wr32(bios, datareg, instdata);
1333 value = bios_rd32(bios, controlreg) & mask;
1335 value |= instaddress;
1336 bios_wr32(bios, controlreg, value);
1343 init_io_restrict_pll2(struct nvbios *bios, uint16_t offset,
1344 struct init_exec *iexec)
1347 * INIT_IO_RESTRICT_PLL2 opcode: 0x4A ('J')
1349 * offset (8 bit): opcode
1350 * offset + 1 (16 bit): CRTC port
1351 * offset + 3 (8 bit): CRTC index
1352 * offset + 4 (8 bit): mask
1353 * offset + 5 (8 bit): shift
1354 * offset + 6 (8 bit): count
1355 * offset + 7 (32 bit): register
1356 * offset + 11 (32 bit): frequency 1
1359 * Starting at offset + 11 there are "count" 32 bit frequencies (kHz).
1360 * Set PLL register "register" to coefficients for frequency n,
1361 * selected by reading index "CRTC index" of "CRTC port" ANDed with
1362 * "mask" and shifted right by "shift".
1365 uint16_t crtcport = ROM16(bios->data[offset + 1]);
1366 uint8_t crtcindex = bios->data[offset + 3];
1367 uint8_t mask = bios->data[offset + 4];
1368 uint8_t shift = bios->data[offset + 5];
1369 uint8_t count = bios->data[offset + 6];
1370 uint32_t reg = ROM32(bios->data[offset + 7]);
1371 int len = 11 + count * 4;
1375 if (!iexec->execute)
1378 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
1379 "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n",
1380 offset, crtcport, crtcindex, mask, shift, count, reg);
1385 config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift;
1386 if (config > count) {
1388 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
1389 offset, config, count);
1393 freq = ROM32(bios->data[offset + 11 + config * 4]);
1395 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Config: 0x%02X, Freq: %dkHz\n",
1396 offset, reg, config, freq);
1398 setPLL(bios, reg, freq);
1404 init_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1407 * INIT_PLL2 opcode: 0x4B ('K')
1409 * offset (8 bit): opcode
1410 * offset + 1 (32 bit): register
1411 * offset + 5 (32 bit): freq
1413 * Set PLL register "register" to coefficients for frequency "freq"
1416 uint32_t reg = ROM32(bios->data[offset + 1]);
1417 uint32_t freq = ROM32(bios->data[offset + 5]);
1419 if (!iexec->execute)
1422 BIOSLOG(bios, "0x%04X: Reg: 0x%04X, Freq: %dkHz\n",
1425 setPLL(bios, reg, freq);
1430 init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1433 * INIT_I2C_BYTE opcode: 0x4C ('L')
1435 * offset (8 bit): opcode
1436 * offset + 1 (8 bit): DCB I2C table entry index
1437 * offset + 2 (8 bit): I2C slave address
1438 * offset + 3 (8 bit): count
1439 * offset + 4 (8 bit): I2C register 1
1440 * offset + 5 (8 bit): mask 1
1441 * offset + 6 (8 bit): data 1
1444 * For each of "count" registers given by "I2C register n" on the device
1445 * addressed by "I2C slave address" on the I2C bus given by
1446 * "DCB I2C table entry index", read the register, AND the result with
1447 * "mask n" and OR it with "data n" before writing it back to the device
1450 uint8_t i2c_index = bios->data[offset + 1];
1451 uint8_t i2c_address = bios->data[offset + 2] >> 1;
1452 uint8_t count = bios->data[offset + 3];
1453 struct nouveau_i2c_chan *chan;
1454 int len = 4 + count * 3;
1457 if (!iexec->execute)
1460 BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, "
1462 offset, i2c_index, i2c_address, count);
1464 chan = init_i2c_device_find(bios->dev, i2c_index);
1468 for (i = 0; i < count; i++) {
1469 uint8_t reg = bios->data[offset + 4 + i * 3];
1470 uint8_t mask = bios->data[offset + 5 + i * 3];
1471 uint8_t data = bios->data[offset + 6 + i * 3];
1472 union i2c_smbus_data val;
1474 ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
1475 I2C_SMBUS_READ, reg,
1476 I2C_SMBUS_BYTE_DATA, &val);
1480 BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, "
1481 "Mask: 0x%02X, Data: 0x%02X\n",
1482 offset, reg, val.byte, mask, data);
1489 ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
1490 I2C_SMBUS_WRITE, reg,
1491 I2C_SMBUS_BYTE_DATA, &val);
1500 init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1503 * INIT_ZM_I2C_BYTE opcode: 0x4D ('M')
1505 * offset (8 bit): opcode
1506 * offset + 1 (8 bit): DCB I2C table entry index
1507 * offset + 2 (8 bit): I2C slave address
1508 * offset + 3 (8 bit): count
1509 * offset + 4 (8 bit): I2C register 1
1510 * offset + 5 (8 bit): data 1
1513 * For each of "count" registers given by "I2C register n" on the device
1514 * addressed by "I2C slave address" on the I2C bus given by
1515 * "DCB I2C table entry index", set the register to "data n"
1518 uint8_t i2c_index = bios->data[offset + 1];
1519 uint8_t i2c_address = bios->data[offset + 2] >> 1;
1520 uint8_t count = bios->data[offset + 3];
1521 struct nouveau_i2c_chan *chan;
1522 int len = 4 + count * 2;
1525 if (!iexec->execute)
1528 BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, "
1530 offset, i2c_index, i2c_address, count);
1532 chan = init_i2c_device_find(bios->dev, i2c_index);
1536 for (i = 0; i < count; i++) {
1537 uint8_t reg = bios->data[offset + 4 + i * 2];
1538 union i2c_smbus_data val;
1540 val.byte = bios->data[offset + 5 + i * 2];
1542 BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Data: 0x%02X\n",
1543 offset, reg, val.byte);
1548 ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
1549 I2C_SMBUS_WRITE, reg,
1550 I2C_SMBUS_BYTE_DATA, &val);
1559 init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1562 * INIT_ZM_I2C opcode: 0x4E ('N')
1564 * offset (8 bit): opcode
1565 * offset + 1 (8 bit): DCB I2C table entry index
1566 * offset + 2 (8 bit): I2C slave address
1567 * offset + 3 (8 bit): count
1568 * offset + 4 (8 bit): data 1
1571 * Send "count" bytes ("data n") to the device addressed by "I2C slave
1572 * address" on the I2C bus given by "DCB I2C table entry index"
1575 uint8_t i2c_index = bios->data[offset + 1];
1576 uint8_t i2c_address = bios->data[offset + 2] >> 1;
1577 uint8_t count = bios->data[offset + 3];
1578 int len = 4 + count;
1579 struct nouveau_i2c_chan *chan;
1584 if (!iexec->execute)
1587 BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, "
1589 offset, i2c_index, i2c_address, count);
1591 chan = init_i2c_device_find(bios->dev, i2c_index);
1595 for (i = 0; i < count; i++) {
1596 data[i] = bios->data[offset + 4 + i];
1598 BIOSLOG(bios, "0x%04X: Data: 0x%02X\n", offset, data[i]);
1601 if (bios->execute) {
1602 msg.addr = i2c_address;
1606 if (i2c_transfer(&chan->adapter, &msg, 1) != 1)
1614 init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1617 * INIT_TMDS opcode: 0x4F ('O') (non-canon name)
1619 * offset (8 bit): opcode
1620 * offset + 1 (8 bit): magic lookup value
1621 * offset + 2 (8 bit): TMDS address
1622 * offset + 3 (8 bit): mask
1623 * offset + 4 (8 bit): data
1625 * Read the data reg for TMDS address "TMDS address", AND it with mask
1626 * and OR it with data, then write it back
1627 * "magic lookup value" determines which TMDS base address register is
1628 * used -- see get_tmds_index_reg()
1631 uint8_t mlv = bios->data[offset + 1];
1632 uint32_t tmdsaddr = bios->data[offset + 2];
1633 uint8_t mask = bios->data[offset + 3];
1634 uint8_t data = bios->data[offset + 4];
1635 uint32_t reg, value;
1637 if (!iexec->execute)
1640 BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, TMDSAddr: 0x%02X, "
1641 "Mask: 0x%02X, Data: 0x%02X\n",
1642 offset, mlv, tmdsaddr, mask, data);
1644 reg = get_tmds_index_reg(bios->dev, mlv);
1648 bios_wr32(bios, reg,
1649 tmdsaddr | NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE);
1650 value = (bios_rd32(bios, reg + 4) & mask) | data;
1651 bios_wr32(bios, reg + 4, value);
1652 bios_wr32(bios, reg, tmdsaddr);
1658 init_zm_tmds_group(struct nvbios *bios, uint16_t offset,
1659 struct init_exec *iexec)
1662 * INIT_ZM_TMDS_GROUP opcode: 0x50 ('P') (non-canon name)
1664 * offset (8 bit): opcode
1665 * offset + 1 (8 bit): magic lookup value
1666 * offset + 2 (8 bit): count
1667 * offset + 3 (8 bit): addr 1
1668 * offset + 4 (8 bit): data 1
1671 * For each of "count" TMDS address and data pairs write "data n" to
1672 * "addr n". "magic lookup value" determines which TMDS base address
1673 * register is used -- see get_tmds_index_reg()
1676 uint8_t mlv = bios->data[offset + 1];
1677 uint8_t count = bios->data[offset + 2];
1678 int len = 3 + count * 2;
1682 if (!iexec->execute)
1685 BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, Count: 0x%02X\n",
1686 offset, mlv, count);
1688 reg = get_tmds_index_reg(bios->dev, mlv);
1692 for (i = 0; i < count; i++) {
1693 uint8_t tmdsaddr = bios->data[offset + 3 + i * 2];
1694 uint8_t tmdsdata = bios->data[offset + 4 + i * 2];
1696 bios_wr32(bios, reg + 4, tmdsdata);
1697 bios_wr32(bios, reg, tmdsaddr);
1704 init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset,
1705 struct init_exec *iexec)
1708 * INIT_CR_INDEX_ADDRESS_LATCHED opcode: 0x51 ('Q')
1710 * offset (8 bit): opcode
1711 * offset + 1 (8 bit): CRTC index1
1712 * offset + 2 (8 bit): CRTC index2
1713 * offset + 3 (8 bit): baseaddr
1714 * offset + 4 (8 bit): count
1715 * offset + 5 (8 bit): data 1
1718 * For each of "count" address and data pairs, write "baseaddr + n" to
1719 * "CRTC index1" and "data n" to "CRTC index2"
1720 * Once complete, restore initial value read from "CRTC index1"
1722 uint8_t crtcindex1 = bios->data[offset + 1];
1723 uint8_t crtcindex2 = bios->data[offset + 2];
1724 uint8_t baseaddr = bios->data[offset + 3];
1725 uint8_t count = bios->data[offset + 4];
1726 int len = 5 + count;
1727 uint8_t oldaddr, data;
1730 if (!iexec->execute)
1733 BIOSLOG(bios, "0x%04X: Index1: 0x%02X, Index2: 0x%02X, "
1734 "BaseAddr: 0x%02X, Count: 0x%02X\n",
1735 offset, crtcindex1, crtcindex2, baseaddr, count);
1737 oldaddr = bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, crtcindex1);
1739 for (i = 0; i < count; i++) {
1740 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex1,
1742 data = bios->data[offset + 5 + i];
1743 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex2, data);
1746 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex1, oldaddr);
1752 init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1755 * INIT_CR opcode: 0x52 ('R')
1757 * offset (8 bit): opcode
1758 * offset + 1 (8 bit): CRTC index
1759 * offset + 2 (8 bit): mask
1760 * offset + 3 (8 bit): data
1762 * Assign the value of at "CRTC index" ANDed with mask and ORed with
1763 * data back to "CRTC index"
1766 uint8_t crtcindex = bios->data[offset + 1];
1767 uint8_t mask = bios->data[offset + 2];
1768 uint8_t data = bios->data[offset + 3];
1771 if (!iexec->execute)
1774 BIOSLOG(bios, "0x%04X: Index: 0x%02X, Mask: 0x%02X, Data: 0x%02X\n",
1775 offset, crtcindex, mask, data);
1777 value = bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, crtcindex) & mask;
1779 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, value);
1785 init_zm_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1788 * INIT_ZM_CR opcode: 0x53 ('S')
1790 * offset (8 bit): opcode
1791 * offset + 1 (8 bit): CRTC index
1792 * offset + 2 (8 bit): value
1794 * Assign "value" to CRTC register with index "CRTC index".
1797 uint8_t crtcindex = ROM32(bios->data[offset + 1]);
1798 uint8_t data = bios->data[offset + 2];
1800 if (!iexec->execute)
1803 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, data);
1809 init_zm_cr_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1812 * INIT_ZM_CR_GROUP opcode: 0x54 ('T')
1814 * offset (8 bit): opcode
1815 * offset + 1 (8 bit): count
1816 * offset + 2 (8 bit): CRTC index 1
1817 * offset + 3 (8 bit): value 1
1820 * For "count", assign "value n" to CRTC register with index
1824 uint8_t count = bios->data[offset + 1];
1825 int len = 2 + count * 2;
1828 if (!iexec->execute)
1831 for (i = 0; i < count; i++)
1832 init_zm_cr(bios, offset + 2 + 2 * i - 1, iexec);
1838 init_condition_time(struct nvbios *bios, uint16_t offset,
1839 struct init_exec *iexec)
1842 * INIT_CONDITION_TIME opcode: 0x56 ('V')
1844 * offset (8 bit): opcode
1845 * offset + 1 (8 bit): condition number
1846 * offset + 2 (8 bit): retries / 50
1848 * Check condition "condition number" in the condition table.
1849 * Bios code then sleeps for 2ms if the condition is not met, and
1850 * repeats up to "retries" times, but on one C51 this has proved
1851 * insufficient. In mmiotraces the driver sleeps for 20ms, so we do
1852 * this, and bail after "retries" times, or 2s, whichever is less.
1853 * If still not met after retries, clear execution flag for this table.
1856 uint8_t cond = bios->data[offset + 1];
1857 uint16_t retries = bios->data[offset + 2] * 50;
1860 if (!iexec->execute)
1866 BIOSLOG(bios, "0x%04X: Condition: 0x%02X, Retries: 0x%02X\n",
1867 offset, cond, retries);
1869 if (!bios->execute) /* avoid 2s delays when "faking" execution */
1872 for (cnt = 0; cnt < retries; cnt++) {
1873 if (bios_condition_met(bios, offset, cond)) {
1874 BIOSLOG(bios, "0x%04X: Condition met, continuing\n",
1878 BIOSLOG(bios, "0x%04X: "
1879 "Condition not met, sleeping for 20ms\n",
1885 if (!bios_condition_met(bios, offset, cond)) {
1887 "0x%04X: Condition still not met after %dms, "
1888 "skipping following opcodes\n", offset, 20 * retries);
1889 iexec->execute = false;
1896 init_zm_reg_sequence(struct nvbios *bios, uint16_t offset,
1897 struct init_exec *iexec)
1900 * INIT_ZM_REG_SEQUENCE opcode: 0x58 ('X')
1902 * offset (8 bit): opcode
1903 * offset + 1 (32 bit): base register
1904 * offset + 5 (8 bit): count
1905 * offset + 6 (32 bit): value 1
1908 * Starting at offset + 6 there are "count" 32 bit values.
1909 * For "count" iterations set "base register" + 4 * current_iteration
1910 * to "value current_iteration"
1913 uint32_t basereg = ROM32(bios->data[offset + 1]);
1914 uint32_t count = bios->data[offset + 5];
1915 int len = 6 + count * 4;
1918 if (!iexec->execute)
1921 BIOSLOG(bios, "0x%04X: BaseReg: 0x%08X, Count: 0x%02X\n",
1922 offset, basereg, count);
1924 for (i = 0; i < count; i++) {
1925 uint32_t reg = basereg + i * 4;
1926 uint32_t data = ROM32(bios->data[offset + 6 + i * 4]);
1928 bios_wr32(bios, reg, data);
1935 init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1938 * INIT_SUB_DIRECT opcode: 0x5B ('[')
1940 * offset (8 bit): opcode
1941 * offset + 1 (16 bit): subroutine offset (in bios)
1943 * Calls a subroutine that will execute commands until INIT_DONE
1947 uint16_t sub_offset = ROM16(bios->data[offset + 1]);
1949 if (!iexec->execute)
1952 BIOSLOG(bios, "0x%04X: Executing subroutine at 0x%04X\n",
1953 offset, sub_offset);
1955 parse_init_table(bios, sub_offset, iexec);
1957 BIOSLOG(bios, "0x%04X: End of 0x%04X subroutine\n", offset, sub_offset);
1963 init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
1966 * INIT_COPY_NV_REG opcode: 0x5F ('_')
1968 * offset (8 bit): opcode
1969 * offset + 1 (32 bit): src reg
1970 * offset + 5 (8 bit): shift
1971 * offset + 6 (32 bit): src mask
1972 * offset + 10 (32 bit): xor
1973 * offset + 14 (32 bit): dst reg
1974 * offset + 18 (32 bit): dst mask
1976 * Shift REGVAL("src reg") right by (signed) "shift", AND result with
1977 * "src mask", then XOR with "xor". Write this OR'd with
1978 * (REGVAL("dst reg") AND'd with "dst mask") to "dst reg"
1981 uint32_t srcreg = *((uint32_t *)(&bios->data[offset + 1]));
1982 uint8_t shift = bios->data[offset + 5];
1983 uint32_t srcmask = *((uint32_t *)(&bios->data[offset + 6]));
1984 uint32_t xor = *((uint32_t *)(&bios->data[offset + 10]));
1985 uint32_t dstreg = *((uint32_t *)(&bios->data[offset + 14]));
1986 uint32_t dstmask = *((uint32_t *)(&bios->data[offset + 18]));
1987 uint32_t srcvalue, dstvalue;
1989 if (!iexec->execute)
1992 BIOSLOG(bios, "0x%04X: SrcReg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%08X, "
1993 "Xor: 0x%08X, DstReg: 0x%08X, DstMask: 0x%08X\n",
1994 offset, srcreg, shift, srcmask, xor, dstreg, dstmask);
1996 srcvalue = bios_rd32(bios, srcreg);
2001 srcvalue <<= (0x100 - shift);
2003 srcvalue = (srcvalue & srcmask) ^ xor;
2005 dstvalue = bios_rd32(bios, dstreg) & dstmask;
2007 bios_wr32(bios, dstreg, dstvalue | srcvalue);
2013 init_zm_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2016 * INIT_ZM_INDEX_IO opcode: 0x62 ('b')
2018 * offset (8 bit): opcode
2019 * offset + 1 (16 bit): CRTC port
2020 * offset + 3 (8 bit): CRTC index
2021 * offset + 4 (8 bit): data
2023 * Write "data" to index "CRTC index" of "CRTC port"
2025 uint16_t crtcport = ROM16(bios->data[offset + 1]);
2026 uint8_t crtcindex = bios->data[offset + 3];
2027 uint8_t data = bios->data[offset + 4];
2029 if (!iexec->execute)
2032 bios_idxprt_wr(bios, crtcport, crtcindex, data);
2038 init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2041 * INIT_COMPUTE_MEM opcode: 0x63 ('c')
2043 * offset (8 bit): opcode
2045 * This opcode is meant to set NV_PFB_CFG0 (0x100200) appropriately so
2046 * that the hardware can correctly calculate how much VRAM it has
2047 * (and subsequently report that value in NV_PFB_CSTATUS (0x10020C))
2049 * The implementation of this opcode in general consists of two parts:
2050 * 1) determination of the memory bus width
2051 * 2) determination of how many of the card's RAM pads have ICs attached
2053 * 1) is done by a cunning combination of writes to offsets 0x1c and
2054 * 0x3c in the framebuffer, and seeing whether the written values are
2055 * read back correctly. This then affects bits 4-7 of NV_PFB_CFG0
2057 * 2) is done by a cunning combination of writes to an offset slightly
2058 * less than the maximum memory reported by NV_PFB_CSTATUS, then seeing
2059 * if the test pattern can be read back. This then affects bits 12-15 of
2062 * In this context a "cunning combination" may include multiple reads
2063 * and writes to varying locations, often alternating the test pattern
2064 * and 0, doubtless to make sure buffers are filled, residual charges
2065 * on tracks are removed etc.
2067 * Unfortunately, the "cunning combination"s mentioned above, and the
2068 * changes to the bits in NV_PFB_CFG0 differ with nearly every bios
2071 * Therefore, we cheat and assume the value of NV_PFB_CFG0 with which
2072 * we started was correct, and use that instead
2075 /* no iexec->execute check by design */
2078 * This appears to be a NOP on G8x chipsets, both io logs of the VBIOS
2079 * and kmmio traces of the binary driver POSTing the card show nothing
2080 * being done for this opcode. why is it still listed in the table?!
2083 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
2085 if (dev_priv->card_type >= NV_40)
2089 * On every card I've seen, this step gets done for us earlier in
2091 uint8_t crdata = bios_idxprt_rd(dev, NV_VIO_SRX, 0x01);
2092 bios_idxprt_wr(dev, NV_VIO_SRX, 0x01, crdata | 0x20);
2096 * This also has probably been done in the scripts, but an mmio trace of
2097 * s3 resume shows nvidia doing it anyway (unlike the NV_VIO_SRX write)
2099 bios_wr32(bios, NV_PFB_REFCTRL, NV_PFB_REFCTRL_VALID_1);
2101 /* write back the saved configuration value */
2102 bios_wr32(bios, NV_PFB_CFG0, bios->state.saved_nv_pfb_cfg0);
2108 init_reset(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2111 * INIT_RESET opcode: 0x65 ('e')
2113 * offset (8 bit): opcode
2114 * offset + 1 (32 bit): register
2115 * offset + 5 (32 bit): value1
2116 * offset + 9 (32 bit): value2
2118 * Assign "value1" to "register", then assign "value2" to "register"
2121 uint32_t reg = ROM32(bios->data[offset + 1]);
2122 uint32_t value1 = ROM32(bios->data[offset + 5]);
2123 uint32_t value2 = ROM32(bios->data[offset + 9]);
2124 uint32_t pci_nv_19, pci_nv_20;
2126 /* no iexec->execute check by design */
2128 pci_nv_19 = bios_rd32(bios, NV_PBUS_PCI_NV_19);
2129 bios_wr32(bios, NV_PBUS_PCI_NV_19, 0);
2130 bios_wr32(bios, reg, value1);
2134 bios_wr32(bios, reg, value2);
2135 bios_wr32(bios, NV_PBUS_PCI_NV_19, pci_nv_19);
2137 pci_nv_20 = bios_rd32(bios, NV_PBUS_PCI_NV_20);
2138 pci_nv_20 &= ~NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED; /* 0xfffffffe */
2139 bios_wr32(bios, NV_PBUS_PCI_NV_20, pci_nv_20);
2145 init_configure_mem(struct nvbios *bios, uint16_t offset,
2146 struct init_exec *iexec)
2149 * INIT_CONFIGURE_MEM opcode: 0x66 ('f')
2151 * offset (8 bit): opcode
2153 * Equivalent to INIT_DONE on bios version 3 or greater.
2154 * For early bios versions, sets up the memory registers, using values
2155 * taken from the memory init table
2158 /* no iexec->execute check by design */
2160 uint16_t meminitoffs = bios->legacy.mem_init_tbl_ptr + MEM_INIT_SIZE * (bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_SCRATCH4__INDEX) >> 4);
2161 uint16_t seqtbloffs = bios->legacy.sdr_seq_tbl_ptr, meminitdata = meminitoffs + 6;
2164 if (bios->major_version > 2)
2167 bios_idxprt_wr(bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX, bios_idxprt_rd(
2168 bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX) | 0x20);
2170 if (bios->data[meminitoffs] & 1)
2171 seqtbloffs = bios->legacy.ddr_seq_tbl_ptr;
2173 for (reg = ROM32(bios->data[seqtbloffs]);
2175 reg = ROM32(bios->data[seqtbloffs += 4])) {
2179 data = NV_PFB_PRE_CMD_PRECHARGE;
2182 data = NV_PFB_PAD_CKE_NORMAL;
2185 data = NV_PFB_REF_CMD_REFRESH;
2188 data = ROM32(bios->data[meminitdata]);
2190 if (data == 0xffffffff)
2194 bios_wr32(bios, reg, data);
2201 init_configure_clk(struct nvbios *bios, uint16_t offset,
2202 struct init_exec *iexec)
2205 * INIT_CONFIGURE_CLK opcode: 0x67 ('g')
2207 * offset (8 bit): opcode
2209 * Equivalent to INIT_DONE on bios version 3 or greater.
2210 * For early bios versions, sets up the NVClk and MClk PLLs, using
2211 * values taken from the memory init table
2214 /* no iexec->execute check by design */
2216 uint16_t meminitoffs = bios->legacy.mem_init_tbl_ptr + MEM_INIT_SIZE * (bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_SCRATCH4__INDEX) >> 4);
2219 if (bios->major_version > 2)
2222 clock = ROM16(bios->data[meminitoffs + 4]) * 10;
2223 setPLL(bios, NV_PRAMDAC_NVPLL_COEFF, clock);
2225 clock = ROM16(bios->data[meminitoffs + 2]) * 10;
2226 if (bios->data[meminitoffs] & 1) /* DDR */
2228 setPLL(bios, NV_PRAMDAC_MPLL_COEFF, clock);
2234 init_configure_preinit(struct nvbios *bios, uint16_t offset,
2235 struct init_exec *iexec)
2238 * INIT_CONFIGURE_PREINIT opcode: 0x68 ('h')
2240 * offset (8 bit): opcode
2242 * Equivalent to INIT_DONE on bios version 3 or greater.
2243 * For early bios versions, does early init, loading ram and crystal
2244 * configuration from straps into CR3C
2247 /* no iexec->execute check by design */
2249 uint32_t straps = bios_rd32(bios, NV_PEXTDEV_BOOT_0);
2250 uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & (1 << 6));
2252 if (bios->major_version > 2)
2255 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR,
2256 NV_CIO_CRE_SCRATCH4__INDEX, cr3c);
2262 init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2265 * INIT_IO opcode: 0x69 ('i')
2267 * offset (8 bit): opcode
2268 * offset + 1 (16 bit): CRTC port
2269 * offset + 3 (8 bit): mask
2270 * offset + 4 (8 bit): data
2272 * Assign ((IOVAL("crtc port") & "mask") | "data") to "crtc port"
2275 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
2276 uint16_t crtcport = ROM16(bios->data[offset + 1]);
2277 uint8_t mask = bios->data[offset + 3];
2278 uint8_t data = bios->data[offset + 4];
2280 if (!iexec->execute)
2283 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Mask: 0x%02X, Data: 0x%02X\n",
2284 offset, crtcport, mask, data);
2287 * I have no idea what this does, but NVIDIA do this magic sequence
2288 * in the places where this INIT_IO happens..
2290 if (dev_priv->card_type >= NV_50 && crtcport == 0x3c3 && data == 1) {
2293 bios_wr32(bios, 0x614100, (bios_rd32(
2294 bios, 0x614100) & 0x0fffffff) | 0x00800000);
2296 bios_wr32(bios, 0x00e18c, bios_rd32(
2297 bios, 0x00e18c) | 0x00020000);
2299 bios_wr32(bios, 0x614900, (bios_rd32(
2300 bios, 0x614900) & 0x0fffffff) | 0x00800000);
2302 bios_wr32(bios, 0x000200, bios_rd32(
2303 bios, 0x000200) & ~0x40000000);
2307 bios_wr32(bios, 0x00e18c, bios_rd32(
2308 bios, 0x00e18c) & ~0x00020000);
2310 bios_wr32(bios, 0x000200, bios_rd32(
2311 bios, 0x000200) | 0x40000000);
2313 bios_wr32(bios, 0x614100, 0x00800018);
2314 bios_wr32(bios, 0x614900, 0x00800018);
2318 bios_wr32(bios, 0x614100, 0x10000018);
2319 bios_wr32(bios, 0x614900, 0x10000018);
2321 for (i = 0; i < 3; i++)
2322 bios_wr32(bios, 0x614280 + (i*0x800), bios_rd32(
2323 bios, 0x614280 + (i*0x800)) & 0xf0f0f0f0);
2325 for (i = 0; i < 2; i++)
2326 bios_wr32(bios, 0x614300 + (i*0x800), bios_rd32(
2327 bios, 0x614300 + (i*0x800)) & 0xfffff0f0);
2329 for (i = 0; i < 3; i++)
2330 bios_wr32(bios, 0x614380 + (i*0x800), bios_rd32(
2331 bios, 0x614380 + (i*0x800)) & 0xfffff0f0);
2333 for (i = 0; i < 2; i++)
2334 bios_wr32(bios, 0x614200 + (i*0x800), bios_rd32(
2335 bios, 0x614200 + (i*0x800)) & 0xfffffff0);
2337 for (i = 0; i < 2; i++)
2338 bios_wr32(bios, 0x614108 + (i*0x800), bios_rd32(
2339 bios, 0x614108 + (i*0x800)) & 0x0fffffff);
2343 bios_port_wr(bios, crtcport, (bios_port_rd(bios, crtcport) & mask) |
2349 init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2352 * INIT_SUB opcode: 0x6B ('k')
2354 * offset (8 bit): opcode
2355 * offset + 1 (8 bit): script number
2357 * Execute script number "script number", as a subroutine
2360 uint8_t sub = bios->data[offset + 1];
2362 if (!iexec->execute)
2365 BIOSLOG(bios, "0x%04X: Calling script %d\n", offset, sub);
2367 parse_init_table(bios,
2368 ROM16(bios->data[bios->init_script_tbls_ptr + sub * 2]),
2371 BIOSLOG(bios, "0x%04X: End of script %d\n", offset, sub);
2377 init_ram_condition(struct nvbios *bios, uint16_t offset,
2378 struct init_exec *iexec)
2381 * INIT_RAM_CONDITION opcode: 0x6D ('m')
2383 * offset (8 bit): opcode
2384 * offset + 1 (8 bit): mask
2385 * offset + 2 (8 bit): cmpval
2387 * Test if (NV_PFB_BOOT_0 & "mask") equals "cmpval".
2388 * If condition not met skip subsequent opcodes until condition is
2389 * inverted (INIT_NOT), or we hit INIT_RESUME
2392 uint8_t mask = bios->data[offset + 1];
2393 uint8_t cmpval = bios->data[offset + 2];
2396 if (!iexec->execute)
2399 data = bios_rd32(bios, NV_PFB_BOOT_0) & mask;
2401 BIOSLOG(bios, "0x%04X: Checking if 0x%08X equals 0x%08X\n",
2402 offset, data, cmpval);
2405 BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
2407 BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
2408 iexec->execute = false;
2415 init_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2418 * INIT_NV_REG opcode: 0x6E ('n')
2420 * offset (8 bit): opcode
2421 * offset + 1 (32 bit): register
2422 * offset + 5 (32 bit): mask
2423 * offset + 9 (32 bit): data
2425 * Assign ((REGVAL("register") & "mask") | "data") to "register"
2428 uint32_t reg = ROM32(bios->data[offset + 1]);
2429 uint32_t mask = ROM32(bios->data[offset + 5]);
2430 uint32_t data = ROM32(bios->data[offset + 9]);
2432 if (!iexec->execute)
2435 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Mask: 0x%08X, Data: 0x%08X\n",
2436 offset, reg, mask, data);
2438 bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | data);
2444 init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2447 * INIT_MACRO opcode: 0x6F ('o')
2449 * offset (8 bit): opcode
2450 * offset + 1 (8 bit): macro number
2452 * Look up macro index "macro number" in the macro index table.
2453 * The macro index table entry has 1 byte for the index in the macro
2454 * table, and 1 byte for the number of times to repeat the macro.
2455 * The macro table entry has 4 bytes for the register address and
2456 * 4 bytes for the value to write to that register
2459 uint8_t macro_index_tbl_idx = bios->data[offset + 1];
2460 uint16_t tmp = bios->macro_index_tbl_ptr + (macro_index_tbl_idx * MACRO_INDEX_SIZE);
2461 uint8_t macro_tbl_idx = bios->data[tmp];
2462 uint8_t count = bios->data[tmp + 1];
2466 if (!iexec->execute)
2469 BIOSLOG(bios, "0x%04X: Macro: 0x%02X, MacroTableIndex: 0x%02X, "
2471 offset, macro_index_tbl_idx, macro_tbl_idx, count);
2473 for (i = 0; i < count; i++) {
2474 uint16_t macroentryptr = bios->macro_tbl_ptr + (macro_tbl_idx + i) * MACRO_SIZE;
2476 reg = ROM32(bios->data[macroentryptr]);
2477 data = ROM32(bios->data[macroentryptr + 4]);
2479 bios_wr32(bios, reg, data);
2486 init_done(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2489 * INIT_DONE opcode: 0x71 ('q')
2491 * offset (8 bit): opcode
2493 * End the current script
2496 /* mild retval abuse to stop parsing this table */
2501 init_resume(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2504 * INIT_RESUME opcode: 0x72 ('r')
2506 * offset (8 bit): opcode
2508 * End the current execute / no-execute condition
2514 iexec->execute = true;
2515 BIOSLOG(bios, "0x%04X: ---- Executing following commands ----\n", offset);
2521 init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2524 * INIT_TIME opcode: 0x74 ('t')
2526 * offset (8 bit): opcode
2527 * offset + 1 (16 bit): time
2529 * Sleep for "time" microseconds.
2532 unsigned time = ROM16(bios->data[offset + 1]);
2534 if (!iexec->execute)
2537 BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X microseconds\n",
2543 msleep((time + 900) / 1000);
2549 init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2552 * INIT_CONDITION opcode: 0x75 ('u')
2554 * offset (8 bit): opcode
2555 * offset + 1 (8 bit): condition number
2557 * Check condition "condition number" in the condition table.
2558 * If condition not met skip subsequent opcodes until condition is
2559 * inverted (INIT_NOT), or we hit INIT_RESUME
2562 uint8_t cond = bios->data[offset + 1];
2564 if (!iexec->execute)
2567 BIOSLOG(bios, "0x%04X: Condition: 0x%02X\n", offset, cond);
2569 if (bios_condition_met(bios, offset, cond))
2570 BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
2572 BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
2573 iexec->execute = false;
2580 init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2583 * INIT_IO_CONDITION opcode: 0x76
2585 * offset (8 bit): opcode
2586 * offset + 1 (8 bit): condition number
2588 * Check condition "condition number" in the io condition table.
2589 * If condition not met skip subsequent opcodes until condition is
2590 * inverted (INIT_NOT), or we hit INIT_RESUME
2593 uint8_t cond = bios->data[offset + 1];
2595 if (!iexec->execute)
2598 BIOSLOG(bios, "0x%04X: IO condition: 0x%02X\n", offset, cond);
2600 if (io_condition_met(bios, offset, cond))
2601 BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
2603 BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
2604 iexec->execute = false;
2611 init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2614 * INIT_INDEX_IO opcode: 0x78 ('x')
2616 * offset (8 bit): opcode
2617 * offset + 1 (16 bit): CRTC port
2618 * offset + 3 (8 bit): CRTC index
2619 * offset + 4 (8 bit): mask
2620 * offset + 5 (8 bit): data
2622 * Read value at index "CRTC index" on "CRTC port", AND with "mask",
2623 * OR with "data", write-back
2626 uint16_t crtcport = ROM16(bios->data[offset + 1]);
2627 uint8_t crtcindex = bios->data[offset + 3];
2628 uint8_t mask = bios->data[offset + 4];
2629 uint8_t data = bios->data[offset + 5];
2632 if (!iexec->execute)
2635 BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
2637 offset, crtcport, crtcindex, mask, data);
2639 value = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) | data;
2640 bios_idxprt_wr(bios, crtcport, crtcindex, value);
2646 init_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2649 * INIT_PLL opcode: 0x79 ('y')
2651 * offset (8 bit): opcode
2652 * offset + 1 (32 bit): register
2653 * offset + 5 (16 bit): freq
2655 * Set PLL register "register" to coefficients for frequency (10kHz)
2659 uint32_t reg = ROM32(bios->data[offset + 1]);
2660 uint16_t freq = ROM16(bios->data[offset + 5]);
2662 if (!iexec->execute)
2665 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Freq: %d0kHz\n", offset, reg, freq);
2667 setPLL(bios, reg, freq * 10);
2673 init_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2676 * INIT_ZM_REG opcode: 0x7A ('z')
2678 * offset (8 bit): opcode
2679 * offset + 1 (32 bit): register
2680 * offset + 5 (32 bit): value
2682 * Assign "value" to "register"
2685 uint32_t reg = ROM32(bios->data[offset + 1]);
2686 uint32_t value = ROM32(bios->data[offset + 5]);
2688 if (!iexec->execute)
2691 if (reg == 0x000200)
2694 bios_wr32(bios, reg, value);
2700 init_ram_restrict_pll(struct nvbios *bios, uint16_t offset,
2701 struct init_exec *iexec)
2704 * INIT_RAM_RESTRICT_PLL opcode: 0x87 ('')
2706 * offset (8 bit): opcode
2707 * offset + 1 (8 bit): PLL type
2708 * offset + 2 (32 bit): frequency 0
2710 * Uses the RAMCFG strap of PEXTDEV_BOOT as an index into the table at
2711 * ram_restrict_table_ptr. The value read from there is used to select
2712 * a frequency from the table starting at 'frequency 0' to be
2713 * programmed into the PLL corresponding to 'type'.
2715 * The PLL limits table on cards using this opcode has a mapping of
2716 * 'type' to the relevant registers.
2719 struct drm_device *dev = bios->dev;
2720 uint32_t strap = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) & 0x0000003c) >> 2;
2721 uint8_t index = bios->data[bios->ram_restrict_tbl_ptr + strap];
2722 uint8_t type = bios->data[offset + 1];
2723 uint32_t freq = ROM32(bios->data[offset + 2 + (index * 4)]);
2724 uint8_t *pll_limits = &bios->data[bios->pll_limit_tbl_ptr], *entry;
2725 int len = 2 + bios->ram_restrict_group_count * 4;
2728 if (!iexec->execute)
2731 if (!bios->pll_limit_tbl_ptr || (pll_limits[0] & 0xf0) != 0x30) {
2732 NV_ERROR(dev, "PLL limits table not version 3.x\n");
2733 return len; /* deliberate, allow default clocks to remain */
2736 entry = pll_limits + pll_limits[1];
2737 for (i = 0; i < pll_limits[3]; i++, entry += pll_limits[2]) {
2738 if (entry[0] == type) {
2739 uint32_t reg = ROM32(entry[3]);
2741 BIOSLOG(bios, "0x%04X: "
2742 "Type %02x Reg 0x%08x Freq %dKHz\n",
2743 offset, type, reg, freq);
2745 setPLL(bios, reg, freq);
2750 NV_ERROR(dev, "PLL type 0x%02x not found in PLL limits table", type);
2755 init_8c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2758 * INIT_8C opcode: 0x8C ('')
2768 init_8d(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2771 * INIT_8D opcode: 0x8D ('')
2781 init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2784 * INIT_GPIO opcode: 0x8E ('')
2786 * offset (8 bit): opcode
2788 * Loop over all entries in the DCB GPIO table, and initialise
2789 * each GPIO according to various values listed in each entry
2792 struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
2793 const uint32_t nv50_gpio_ctl[2] = { 0xe100, 0xe28c };
2796 if (dev_priv->card_type != NV_50) {
2797 NV_ERROR(bios->dev, "INIT_GPIO on unsupported chipset\n");
2801 if (!iexec->execute)
2804 for (i = 0; i < bios->dcb.gpio.entries; i++) {
2805 struct dcb_gpio_entry *gpio = &bios->dcb.gpio.entry[i];
2808 BIOSLOG(bios, "0x%04X: Entry: 0x%08X\n", offset, gpio->entry);
2810 nv50_gpio_set(bios->dev, gpio->tag, gpio->state_default);
2812 /* The NVIDIA binary driver doesn't appear to actually do
2813 * any of this, my VBIOS does however.
2815 /* Not a clue, needs de-magicing */
2816 r = nv50_gpio_ctl[gpio->line >> 4];
2817 s = (gpio->line & 0x0f);
2818 v = bios_rd32(bios, r) & ~(0x00010001 << s);
2819 switch ((gpio->entry & 0x06000000) >> 25) {
2821 v |= (0x00000001 << s);
2824 v |= (0x00010000 << s);
2829 bios_wr32(bios, r, v);
2836 init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset,
2837 struct init_exec *iexec)
2840 * INIT_RAM_RESTRICT_ZM_REG_GROUP opcode: 0x8F ('')
2842 * offset (8 bit): opcode
2843 * offset + 1 (32 bit): reg
2844 * offset + 5 (8 bit): regincrement
2845 * offset + 6 (8 bit): count
2846 * offset + 7 (32 bit): value 1,1
2849 * Use the RAMCFG strap of PEXTDEV_BOOT as an index into the table at
2850 * ram_restrict_table_ptr. The value read from here is 'n', and
2851 * "value 1,n" gets written to "reg". This repeats "count" times and on
2852 * each iteration 'm', "reg" increases by "regincrement" and
2853 * "value m,n" is used. The extent of n is limited by a number read
2854 * from the 'M' BIT table, herein called "blocklen"
2857 uint32_t reg = ROM32(bios->data[offset + 1]);
2858 uint8_t regincrement = bios->data[offset + 5];
2859 uint8_t count = bios->data[offset + 6];
2860 uint32_t strap_ramcfg, data;
2861 /* previously set by 'M' BIT table */
2862 uint16_t blocklen = bios->ram_restrict_group_count * 4;
2863 int len = 7 + count * blocklen;
2868 if (!iexec->execute)
2873 "0x%04X: Zero block length - has the M table "
2874 "been parsed?\n", offset);
2878 strap_ramcfg = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 2) & 0xf;
2879 index = bios->data[bios->ram_restrict_tbl_ptr + strap_ramcfg];
2881 BIOSLOG(bios, "0x%04X: Reg: 0x%08X, RegIncrement: 0x%02X, "
2882 "Count: 0x%02X, StrapRamCfg: 0x%02X, Index: 0x%02X\n",
2883 offset, reg, regincrement, count, strap_ramcfg, index);
2885 for (i = 0; i < count; i++) {
2886 data = ROM32(bios->data[offset + 7 + index * 4 + blocklen * i]);
2888 bios_wr32(bios, reg, data);
2890 reg += regincrement;
2897 init_copy_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2900 * INIT_COPY_ZM_REG opcode: 0x90 ('')
2902 * offset (8 bit): opcode
2903 * offset + 1 (32 bit): src reg
2904 * offset + 5 (32 bit): dst reg
2906 * Put contents of "src reg" into "dst reg"
2909 uint32_t srcreg = ROM32(bios->data[offset + 1]);
2910 uint32_t dstreg = ROM32(bios->data[offset + 5]);
2912 if (!iexec->execute)
2915 bios_wr32(bios, dstreg, bios_rd32(bios, srcreg));
2921 init_zm_reg_group_addr_latched(struct nvbios *bios, uint16_t offset,
2922 struct init_exec *iexec)
2925 * INIT_ZM_REG_GROUP_ADDRESS_LATCHED opcode: 0x91 ('')
2927 * offset (8 bit): opcode
2928 * offset + 1 (32 bit): dst reg
2929 * offset + 5 (8 bit): count
2930 * offset + 6 (32 bit): data 1
2933 * For each of "count" values write "data n" to "dst reg"
2936 uint32_t reg = ROM32(bios->data[offset + 1]);
2937 uint8_t count = bios->data[offset + 5];
2938 int len = 6 + count * 4;
2941 if (!iexec->execute)
2944 for (i = 0; i < count; i++) {
2945 uint32_t data = ROM32(bios->data[offset + 6 + 4 * i]);
2946 bios_wr32(bios, reg, data);
2953 init_reserved(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2956 * INIT_RESERVED opcode: 0x92 ('')
2958 * offset (8 bit): opcode
2960 * Seemingly does nothing
2967 init_96(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
2970 * INIT_96 opcode: 0x96 ('')
2972 * offset (8 bit): opcode
2973 * offset + 1 (32 bit): sreg
2974 * offset + 5 (8 bit): sshift
2975 * offset + 6 (8 bit): smask
2976 * offset + 7 (8 bit): index
2977 * offset + 8 (32 bit): reg
2978 * offset + 12 (32 bit): mask
2979 * offset + 16 (8 bit): shift
2983 uint16_t xlatptr = bios->init96_tbl_ptr + (bios->data[offset + 7] * 2);
2984 uint32_t reg = ROM32(bios->data[offset + 8]);
2985 uint32_t mask = ROM32(bios->data[offset + 12]);
2988 val = bios_rd32(bios, ROM32(bios->data[offset + 1]));
2989 if (bios->data[offset + 5] < 0x80)
2990 val >>= bios->data[offset + 5];
2992 val <<= (0x100 - bios->data[offset + 5]);
2993 val &= bios->data[offset + 6];
2995 val = bios->data[ROM16(bios->data[xlatptr]) + val];
2996 val <<= bios->data[offset + 16];
2998 if (!iexec->execute)
3001 bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | val);
3006 init_97(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3009 * INIT_97 opcode: 0x97 ('')
3011 * offset (8 bit): opcode
3012 * offset + 1 (32 bit): register
3013 * offset + 5 (32 bit): mask
3014 * offset + 9 (32 bit): value
3016 * Adds "value" to "register" preserving the fields specified
3020 uint32_t reg = ROM32(bios->data[offset + 1]);
3021 uint32_t mask = ROM32(bios->data[offset + 5]);
3022 uint32_t add = ROM32(bios->data[offset + 9]);
3025 val = bios_rd32(bios, reg);
3026 val = (val & mask) | ((val + add) & ~mask);
3028 if (!iexec->execute)
3031 bios_wr32(bios, reg, val);
3036 init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3039 * INIT_AUXCH opcode: 0x98 ('')
3041 * offset (8 bit): opcode
3042 * offset + 1 (32 bit): address
3043 * offset + 5 (8 bit): count
3044 * offset + 6 (8 bit): mask 0
3045 * offset + 7 (8 bit): data 0
3050 struct drm_device *dev = bios->dev;
3051 struct nouveau_i2c_chan *auxch;
3052 uint32_t addr = ROM32(bios->data[offset + 1]);
3053 uint8_t count = bios->data[offset + 5];
3054 int len = 6 + count * 2;
3057 if (!bios->display.output) {
3058 NV_ERROR(dev, "INIT_AUXCH: no active output\n");
3062 auxch = init_i2c_device_find(dev, bios->display.output->i2c_index);
3064 NV_ERROR(dev, "INIT_AUXCH: couldn't get auxch %d\n",
3065 bios->display.output->i2c_index);
3069 if (!iexec->execute)
3073 for (i = 0; i < count; i++, offset += 2) {
3076 ret = nouveau_dp_auxch(auxch, 9, addr, &data, 1);
3078 NV_ERROR(dev, "INIT_AUXCH: rd auxch fail %d\n", ret);
3082 data &= bios->data[offset + 0];
3083 data |= bios->data[offset + 1];
3085 ret = nouveau_dp_auxch(auxch, 8, addr, &data, 1);
3087 NV_ERROR(dev, "INIT_AUXCH: wr auxch fail %d\n", ret);
3096 init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
3099 * INIT_ZM_AUXCH opcode: 0x99 ('')
3101 * offset (8 bit): opcode
3102 * offset + 1 (32 bit): address
3103 * offset + 5 (8 bit): count
3104 * offset + 6 (8 bit): data 0
3109 struct drm_device *dev = bios->dev;
3110 struct nouveau_i2c_chan *auxch;
3111 uint32_t addr = ROM32(bios->data[offset + 1]);
3112 uint8_t count = bios->data[offset + 5];
3113 int len = 6 + count;
3116 if (!bios->display.output) {
3117 NV_ERROR(dev, "INIT_ZM_AUXCH: no active output\n");
3121 auxch = init_i2c_device_find(dev, bios->display.output->i2c_index);
3123 NV_ERROR(dev, "INIT_ZM_AUXCH: couldn't get auxch %d\n",
3124 bios->display.output->i2c_index);
3128 if (!iexec->execute)
3132 for (i = 0; i < count; i++, offset++) {
3133 ret = nouveau_dp_auxch(auxch, 8, addr, &bios->data[offset], 1);
3135 NV_ERROR(dev, "INIT_ZM_AUXCH: wr auxch fail %d\n", ret);
3143 static struct init_tbl_entry itbl_entry[] = {
3144 /* command name , id , length , offset , mult , command handler */
3145 /* INIT_PROG (0x31, 15, 10, 4) removed due to no example of use */
3146 { "INIT_IO_RESTRICT_PROG" , 0x32, init_io_restrict_prog },
3147 { "INIT_REPEAT" , 0x33, init_repeat },
3148 { "INIT_IO_RESTRICT_PLL" , 0x34, init_io_restrict_pll },
3149 { "INIT_END_REPEAT" , 0x36, init_end_repeat },
3150 { "INIT_COPY" , 0x37, init_copy },
3151 { "INIT_NOT" , 0x38, init_not },
3152 { "INIT_IO_FLAG_CONDITION" , 0x39, init_io_flag_condition },
3153 { "INIT_DP_CONDITION" , 0x3A, init_dp_condition },
3154 { "INIT_OP_3B" , 0x3B, init_op_3b },
3155 { "INIT_OP_3C" , 0x3C, init_op_3c },
3156 { "INIT_INDEX_ADDRESS_LATCHED" , 0x49, init_idx_addr_latched },
3157 { "INIT_IO_RESTRICT_PLL2" , 0x4A, init_io_restrict_pll2 },
3158 { "INIT_PLL2" , 0x4B, init_pll2 },
3159 { "INIT_I2C_BYTE" , 0x4C, init_i2c_byte },
3160 { "INIT_ZM_I2C_BYTE" , 0x4D, init_zm_i2c_byte },
3161 { "INIT_ZM_I2C" , 0x4E, init_zm_i2c },
3162 { "INIT_TMDS" , 0x4F, init_tmds },
3163 { "INIT_ZM_TMDS_GROUP" , 0x50, init_zm_tmds_group },
3164 { "INIT_CR_INDEX_ADDRESS_LATCHED" , 0x51, init_cr_idx_adr_latch },
3165 { "INIT_CR" , 0x52, init_cr },
3166 { "INIT_ZM_CR" , 0x53, init_zm_cr },
3167 { "INIT_ZM_CR_GROUP" , 0x54, init_zm_cr_group },
3168 { "INIT_CONDITION_TIME" , 0x56, init_condition_time },
3169 { "INIT_ZM_REG_SEQUENCE" , 0x58, init_zm_reg_sequence },
3170 /* INIT_INDIRECT_REG (0x5A, 7, 0, 0) removed due to no example of use */
3171 { "INIT_SUB_DIRECT" , 0x5B, init_sub_direct },
3172 { "INIT_COPY_NV_REG" , 0x5F, init_copy_nv_reg },
3173 { "INIT_ZM_INDEX_IO" , 0x62, init_zm_index_io },
3174 { "INIT_COMPUTE_MEM" , 0x63, init_compute_mem },
3175 { "INIT_RESET" , 0x65, init_reset },
3176 { "INIT_CONFIGURE_MEM" , 0x66, init_configure_mem },
3177 { "INIT_CONFIGURE_CLK" , 0x67, init_configure_clk },
3178 { "INIT_CONFIGURE_PREINIT" , 0x68, init_configure_preinit },
3179 { "INIT_IO" , 0x69, init_io },
3180 { "INIT_SUB" , 0x6B, init_sub },
3181 { "INIT_RAM_CONDITION" , 0x6D, init_ram_condition },
3182 { "INIT_NV_REG" , 0x6E, init_nv_reg },
3183 { "INIT_MACRO" , 0x6F, init_macro },
3184 { "INIT_DONE" , 0x71, init_done },
3185 { "INIT_RESUME" , 0x72, init_resume },
3186 /* INIT_RAM_CONDITION2 (0x73, 9, 0, 0) removed due to no example of use */
3187 { "INIT_TIME" , 0x74, init_time },
3188 { "INIT_CONDITION" , 0x75, init_condition },
3189 { "INIT_IO_CONDITION" , 0x76, init_io_condition },
3190 { "INIT_INDEX_IO" , 0x78, init_index_io },
3191 { "INIT_PLL" , 0x79, init_pll },
3192 { "INIT_ZM_REG" , 0x7A, init_zm_reg },
3193 { "INIT_RAM_RESTRICT_PLL" , 0x87, init_ram_restrict_pll },
3194 { "INIT_8C" , 0x8C, init_8c },
3195 { "INIT_8D" , 0x8D, init_8d },
3196 { "INIT_GPIO" , 0x8E, init_gpio },
3197 { "INIT_RAM_RESTRICT_ZM_REG_GROUP" , 0x8F, init_ram_restrict_zm_reg_group },
3198 { "INIT_COPY_ZM_REG" , 0x90, init_copy_zm_reg },
3199 { "INIT_ZM_REG_GROUP_ADDRESS_LATCHED" , 0x91, init_zm_reg_group_addr_latched },
3200 { "INIT_RESERVED" , 0x92, init_reserved },
3201 { "INIT_96" , 0x96, init_96 },
3202 { "INIT_97" , 0x97, init_97 },
3203 { "INIT_AUXCH" , 0x98, init_auxch },
3204 { "INIT_ZM_AUXCH" , 0x99, init_zm_auxch },
3208 #define MAX_TABLE_OPS 1000
3211 parse_init_table(struct nvbios *bios, unsigned int offset,
3212 struct init_exec *iexec)
3215 * Parses all commands in an init table.
3217 * We start out executing all commands found in the init table. Some
3218 * opcodes may change the status of iexec->execute to SKIP, which will
3219 * cause the following opcodes to perform no operation until the value
3220 * is changed back to EXECUTE.
3223 int count = 0, i, ret;
3227 * Loop until INIT_DONE causes us to break out of the loop
3228 * (or until offset > bios length just in case... )
3229 * (and no more than MAX_TABLE_OPS iterations, just in case... )
3231 while ((offset < bios->length) && (count++ < MAX_TABLE_OPS)) {
3232 id = bios->data[offset];
3234 /* Find matching id in itbl_entry */
3235 for (i = 0; itbl_entry[i].name && (itbl_entry[i].id != id); i++)
3238 if (!itbl_entry[i].name) {
3240 "0x%04X: Init table command not found: "
3241 "0x%02X\n", offset, id);
3245 BIOSLOG(bios, "0x%04X: [ (0x%02X) - %s ]\n", offset,
3246 itbl_entry[i].id, itbl_entry[i].name);
3248 /* execute eventual command handler */
3249 ret = (*itbl_entry[i].handler)(bios, offset, iexec);
3251 NV_ERROR(bios->dev, "0x%04X: Failed parsing init "
3252 "table opcode: %s %d\n", offset,
3253 itbl_entry[i].name, ret);
3260 * Add the offset of the current command including all data
3261 * of that command. The offset will then be pointing on the
3267 if (offset >= bios->length)
3269 "Offset 0x%04X greater than known bios image length. "
3270 "Corrupt image?\n", offset);
3271 if (count >= MAX_TABLE_OPS)
3273 "More than %d opcodes to a table is unlikely, "
3274 "is the bios image corrupt?\n", MAX_TABLE_OPS);
3280 parse_init_tables(struct nvbios *bios)
3282 /* Loops and calls parse_init_table() for each present table. */
3286 struct init_exec iexec = {true, false};
3288 if (bios->old_style_init) {
3289 if (bios->init_script_tbls_ptr)
3290 parse_init_table(bios, bios->init_script_tbls_ptr, &iexec);
3291 if (bios->extra_init_script_tbl_ptr)
3292 parse_init_table(bios, bios->extra_init_script_tbl_ptr, &iexec);
3297 while ((table = ROM16(bios->data[bios->init_script_tbls_ptr + i]))) {
3299 "Parsing VBIOS init table %d at offset 0x%04X\n",
3301 BIOSLOG(bios, "0x%04X: ------ Executing following commands ------\n", table);
3303 parse_init_table(bios, table, &iexec);
3308 static uint16_t clkcmptable(struct nvbios *bios, uint16_t clktable, int pxclk)
3310 int compare_record_len, i = 0;
3311 uint16_t compareclk, scriptptr = 0;
3313 if (bios->major_version < 5) /* pre BIT */
3314 compare_record_len = 3;
3316 compare_record_len = 4;
3319 compareclk = ROM16(bios->data[clktable + compare_record_len * i]);
3320 if (pxclk >= compareclk * 10) {
3321 if (bios->major_version < 5) {
3322 uint8_t tmdssub = bios->data[clktable + 2 + compare_record_len * i];
3323 scriptptr = ROM16(bios->data[bios->init_script_tbls_ptr + tmdssub * 2]);
3325 scriptptr = ROM16(bios->data[clktable + 2 + compare_record_len * i]);
3329 } while (compareclk);
3335 run_digital_op_script(struct drm_device *dev, uint16_t scriptptr,
3336 struct dcb_entry *dcbent, int head, bool dl)
3338 struct drm_nouveau_private *dev_priv = dev->dev_private;
3339 struct nvbios *bios = &dev_priv->vbios;
3340 struct init_exec iexec = {true, false};
3342 NV_TRACE(dev, "0x%04X: Parsing digital output script table\n",
3344 bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_44,
3345 head ? NV_CIO_CRE_44_HEADB : NV_CIO_CRE_44_HEADA);
3346 /* note: if dcb entries have been merged, index may be misleading */
3347 NVWriteVgaCrtc5758(dev, head, 0, dcbent->index);
3348 parse_init_table(bios, scriptptr, &iexec);
3350 nv04_dfp_bind_head(dev, dcbent, head, dl);
3353 static int call_lvds_manufacturer_script(struct drm_device *dev, struct dcb_entry *dcbent, int head, enum LVDS_script script)
3355 struct drm_nouveau_private *dev_priv = dev->dev_private;
3356 struct nvbios *bios = &dev_priv->vbios;
3357 uint8_t sub = bios->data[bios->fp.xlated_entry + script] + (bios->fp.link_c_increment && dcbent->or & OUTPUT_C ? 1 : 0);
3358 uint16_t scriptofs = ROM16(bios->data[bios->init_script_tbls_ptr + sub * 2]);
3360 if (!bios->fp.xlated_entry || !sub || !scriptofs)
3363 run_digital_op_script(dev, scriptofs, dcbent, head, bios->fp.dual_link);
3365 if (script == LVDS_PANEL_OFF) {
3366 /* off-on delay in ms */
3367 msleep(ROM16(bios->data[bios->fp.xlated_entry + 7]));
3370 /* Powerbook specific quirks */
3371 if ((dev->pci_device & 0xffff) == 0x0179 ||
3372 (dev->pci_device & 0xffff) == 0x0189 ||
3373 (dev->pci_device & 0xffff) == 0x0329) {
3374 if (script == LVDS_RESET) {
3375 nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
3377 } else if (script == LVDS_PANEL_ON) {
3378 bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
3379 bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
3381 bios_wr32(bios, NV_PCRTC_GPIO_EXT,
3382 bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
3384 } else if (script == LVDS_PANEL_OFF) {
3385 bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
3386 bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
3388 bios_wr32(bios, NV_PCRTC_GPIO_EXT,
3389 bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
3397 static int run_lvds_table(struct drm_device *dev, struct dcb_entry *dcbent, int head, enum LVDS_script script, int pxclk)
3400 * The BIT LVDS table's header has the information to setup the
3401 * necessary registers. Following the standard 4 byte header are:
3402 * A bitmask byte and a dual-link transition pxclk value for use in
3403 * selecting the init script when not using straps; 4 script pointers
3404 * for panel power, selected by output and on/off; and 8 table pointers
3405 * for panel init, the needed one determined by output, and bits in the
3406 * conf byte. These tables are similar to the TMDS tables, consisting
3407 * of a list of pxclks and script pointers.
3409 struct drm_nouveau_private *dev_priv = dev->dev_private;
3410 struct nvbios *bios = &dev_priv->vbios;
3411 unsigned int outputset = (dcbent->or == 4) ? 1 : 0;
3412 uint16_t scriptptr = 0, clktable;
3415 * For now we assume version 3.0 table - g80 support will need some
3422 case LVDS_BACKLIGHT_ON:
3424 scriptptr = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 7 + outputset * 2]);
3426 case LVDS_BACKLIGHT_OFF:
3427 case LVDS_PANEL_OFF:
3428 scriptptr = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 11 + outputset * 2]);
3431 clktable = bios->fp.lvdsmanufacturerpointer + 15;
3432 if (dcbent->or == 4)
3435 if (dcbent->lvdsconf.use_straps_for_mode) {
3436 if (bios->fp.dual_link)
3438 if (bios->fp.if_is_24bit)
3442 int cmpval_24bit = (dcbent->or == 4) ? 4 : 1;
3444 if (bios->fp.dual_link) {
3449 if (bios->fp.strapless_is_24bit & cmpval_24bit)
3453 clktable = ROM16(bios->data[clktable]);
3455 NV_ERROR(dev, "Pixel clock comparison table not found\n");
3458 scriptptr = clkcmptable(bios, clktable, pxclk);
3462 NV_ERROR(dev, "LVDS output init script not found\n");
3465 run_digital_op_script(dev, scriptptr, dcbent, head, bios->fp.dual_link);
3470 int call_lvds_script(struct drm_device *dev, struct dcb_entry *dcbent, int head, enum LVDS_script script, int pxclk)
3473 * LVDS operations are multiplexed in an effort to present a single API
3474 * which works with two vastly differing underlying structures.
3475 * This acts as the demux
3478 struct drm_nouveau_private *dev_priv = dev->dev_private;
3479 struct nvbios *bios = &dev_priv->vbios;
3480 uint8_t lvds_ver = bios->data[bios->fp.lvdsmanufacturerpointer];
3481 uint32_t sel_clk_binding, sel_clk;
3484 if (bios->fp.last_script_invoc == (script << 1 | head) || !lvds_ver ||
3485 (lvds_ver >= 0x30 && script == LVDS_INIT))
3488 if (!bios->fp.lvds_init_run) {
3489 bios->fp.lvds_init_run = true;
3490 call_lvds_script(dev, dcbent, head, LVDS_INIT, pxclk);
3493 if (script == LVDS_PANEL_ON && bios->fp.reset_after_pclk_change)
3494 call_lvds_script(dev, dcbent, head, LVDS_RESET, pxclk);
3495 if (script == LVDS_RESET && bios->fp.power_off_for_reset)
3496 call_lvds_script(dev, dcbent, head, LVDS_PANEL_OFF, pxclk);
3498 NV_TRACE(dev, "Calling LVDS script %d:\n", script);
3500 /* don't let script change pll->head binding */
3501 sel_clk_binding = bios_rd32(bios, NV_PRAMDAC_SEL_CLK) & 0x50000;
3503 if (lvds_ver < 0x30)
3504 ret = call_lvds_manufacturer_script(dev, dcbent, head, script);
3506 ret = run_lvds_table(dev, dcbent, head, script, pxclk);
3508 bios->fp.last_script_invoc = (script << 1 | head);
3510 sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK) & ~0x50000;
3511 NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, sel_clk | sel_clk_binding);
3512 /* some scripts set a value in NV_PBUS_POWERCTRL_2 and break video overlay */
3513 nvWriteMC(dev, NV_PBUS_POWERCTRL_2, 0);
3518 struct lvdstableheader {
3519 uint8_t lvds_ver, headerlen, recordlen;
3522 static int parse_lvds_manufacturer_table_header(struct drm_device *dev, struct nvbios *bios, struct lvdstableheader *lth)
3525 * BMP version (0xa) LVDS table has a simple header of version and
3526 * record length. The BIT LVDS table has the typical BIT table header:
3527 * version byte, header length byte, record length byte, and a byte for
3528 * the maximum number of records that can be held in the table.
3531 uint8_t lvds_ver, headerlen, recordlen;
3533 memset(lth, 0, sizeof(struct lvdstableheader));
3535 if (bios->fp.lvdsmanufacturerpointer == 0x0) {
3536 NV_ERROR(dev, "Pointer to LVDS manufacturer table invalid\n");
3540 lvds_ver = bios->data[bios->fp.lvdsmanufacturerpointer];
3543 case 0x0a: /* pre NV40 */
3545 recordlen = bios->data[bios->fp.lvdsmanufacturerpointer + 1];
3547 case 0x30: /* NV4x */
3548 headerlen = bios->data[bios->fp.lvdsmanufacturerpointer + 1];
3549 if (headerlen < 0x1f) {
3550 NV_ERROR(dev, "LVDS table header not understood\n");
3553 recordlen = bios->data[bios->fp.lvdsmanufacturerpointer + 2];
3555 case 0x40: /* G80/G90 */
3556 headerlen = bios->data[bios->fp.lvdsmanufacturerpointer + 1];
3557 if (headerlen < 0x7) {
3558 NV_ERROR(dev, "LVDS table header not understood\n");
3561 recordlen = bios->data[bios->fp.lvdsmanufacturerpointer + 2];
3565 "LVDS table revision %d.%d not currently supported\n",
3566 lvds_ver >> 4, lvds_ver & 0xf);
3570 lth->lvds_ver = lvds_ver;
3571 lth->headerlen = headerlen;
3572 lth->recordlen = recordlen;
3578 get_fp_strap(struct drm_device *dev, struct nvbios *bios)
3580 struct drm_nouveau_private *dev_priv = dev->dev_private;
3583 * The fp strap is normally dictated by the "User Strap" in
3584 * PEXTDEV_BOOT_0[20:16], but on BMP cards when bit 2 of the
3585 * Internal_Flags struct at 0x48 is set, the user strap gets overriden
3586 * by the PCI subsystem ID during POST, but not before the previous user
3587 * strap has been committed to CR58 for CR57=0xf on head A, which may be
3588 * read and used instead
3591 if (bios->major_version < 5 && bios->data[0x48] & 0x4)
3592 return NVReadVgaCrtc5758(dev, 0, 0xf) & 0xf;
3594 if (dev_priv->card_type >= NV_50)
3595 return (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 24) & 0xf;
3597 return (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 16) & 0xf;
3600 static int parse_fp_mode_table(struct drm_device *dev, struct nvbios *bios)
3603 uint8_t fptable_ver, headerlen = 0, recordlen, fpentries = 0xf, fpindex;
3604 int ret, ofs, fpstrapping;
3605 struct lvdstableheader lth;
3607 if (bios->fp.fptablepointer == 0x0) {
3608 /* Apple cards don't have the fp table; the laptops use DDC */
3609 /* The table is also missing on some x86 IGPs */
3611 NV_ERROR(dev, "Pointer to flat panel table invalid\n");
3613 bios->digital_min_front_porch = 0x4b;
3617 fptable = &bios->data[bios->fp.fptablepointer];
3618 fptable_ver = fptable[0];
3620 switch (fptable_ver) {
3622 * BMP version 0x5.0x11 BIOSen have version 1 like tables, but no
3623 * version field, and miss one of the spread spectrum/PWM bytes.
3624 * This could affect early GF2Go parts (not seen any appropriate ROMs
3625 * though). Here we assume that a version of 0x05 matches this case
3626 * (combining with a BMP version check would be better), as the
3627 * common case for the panel type field is 0x0005, and that is in
3628 * fact what we are reading the first byte of.
3630 case 0x05: /* some NV10, 11, 15, 16 */
3634 case 0x10: /* some NV15/16, and NV11+ */
3638 case 0x20: /* NV40+ */
3639 headerlen = fptable[1];
3640 recordlen = fptable[2];
3641 fpentries = fptable[3];
3643 * fptable[4] is the minimum
3644 * RAMDAC_FP_HCRTC -> RAMDAC_FP_HSYNC_START gap
3646 bios->digital_min_front_porch = fptable[4];
3651 "FP table revision %d.%d not currently supported\n",
3652 fptable_ver >> 4, fptable_ver & 0xf);
3656 if (!bios->is_mobile) /* !mobile only needs digital_min_front_porch */
3659 ret = parse_lvds_manufacturer_table_header(dev, bios, <h);
3663 if (lth.lvds_ver == 0x30 || lth.lvds_ver == 0x40) {
3664 bios->fp.fpxlatetableptr = bios->fp.lvdsmanufacturerpointer +
3666 bios->fp.xlatwidth = lth.recordlen;
3668 if (bios->fp.fpxlatetableptr == 0x0) {
3669 NV_ERROR(dev, "Pointer to flat panel xlat table invalid\n");
3673 fpstrapping = get_fp_strap(dev, bios);
3675 fpindex = bios->data[bios->fp.fpxlatetableptr +
3676 fpstrapping * bios->fp.xlatwidth];
3678 if (fpindex > fpentries) {
3679 NV_ERROR(dev, "Bad flat panel table index\n");
3683 /* nv4x cards need both a strap value and fpindex of 0xf to use DDC */
3684 if (lth.lvds_ver > 0x10)
3685 bios->fp_no_ddc = fpstrapping != 0xf || fpindex != 0xf;
3688 * If either the strap or xlated fpindex value are 0xf there is no
3689 * panel using a strap-derived bios mode present. this condition
3690 * includes, but is different from, the DDC panel indicator above
3692 if (fpstrapping == 0xf || fpindex == 0xf)
3695 bios->fp.mode_ptr = bios->fp.fptablepointer + headerlen +
3696 recordlen * fpindex + ofs;
3698 NV_TRACE(dev, "BIOS FP mode: %dx%d (%dkHz pixel clock)\n",
3699 ROM16(bios->data[bios->fp.mode_ptr + 11]) + 1,
3700 ROM16(bios->data[bios->fp.mode_ptr + 25]) + 1,
3701 ROM16(bios->data[bios->fp.mode_ptr + 7]) * 10);
3706 bool nouveau_bios_fp_mode(struct drm_device *dev, struct drm_display_mode *mode)
3708 struct drm_nouveau_private *dev_priv = dev->dev_private;
3709 struct nvbios *bios = &dev_priv->vbios;
3710 uint8_t *mode_entry = &bios->data[bios->fp.mode_ptr];
3712 if (!mode) /* just checking whether we can produce a mode */
3713 return bios->fp.mode_ptr;
3715 memset(mode, 0, sizeof(struct drm_display_mode));
3717 * For version 1.0 (version in byte 0):
3718 * bytes 1-2 are "panel type", including bits on whether Colour/mono,
3719 * single/dual link, and type (TFT etc.)
3720 * bytes 3-6 are bits per colour in RGBX
3722 mode->clock = ROM16(mode_entry[7]) * 10;
3723 /* bytes 9-10 is HActive */
3724 mode->hdisplay = ROM16(mode_entry[11]) + 1;
3726 * bytes 13-14 is HValid Start
3727 * bytes 15-16 is HValid End
3729 mode->hsync_start = ROM16(mode_entry[17]) + 1;
3730 mode->hsync_end = ROM16(mode_entry[19]) + 1;
3731 mode->htotal = ROM16(mode_entry[21]) + 1;
3732 /* bytes 23-24, 27-30 similarly, but vertical */
3733 mode->vdisplay = ROM16(mode_entry[25]) + 1;
3734 mode->vsync_start = ROM16(mode_entry[31]) + 1;
3735 mode->vsync_end = ROM16(mode_entry[33]) + 1;
3736 mode->vtotal = ROM16(mode_entry[35]) + 1;
3737 mode->flags |= (mode_entry[37] & 0x10) ?
3738 DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC;
3739 mode->flags |= (mode_entry[37] & 0x1) ?
3740 DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
3742 * bytes 38-39 relate to spread spectrum settings
3743 * bytes 40-43 are something to do with PWM
3746 mode->status = MODE_OK;
3747 mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
3748 drm_mode_set_name(mode);
3749 return bios->fp.mode_ptr;
3752 int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, bool *if_is_24bit)
3755 * The LVDS table header is (mostly) described in
3756 * parse_lvds_manufacturer_table_header(): the BIT header additionally
3757 * contains the dual-link transition pxclk (in 10s kHz), at byte 5 - if
3758 * straps are not being used for the panel, this specifies the frequency
3759 * at which modes should be set up in the dual link style.
3761 * Following the header, the BMP (ver 0xa) table has several records,
3762 * indexed by a separate xlat table, indexed in turn by the fp strap in
3763 * EXTDEV_BOOT. Each record had a config byte, followed by 6 script
3764 * numbers for use by INIT_SUB which controlled panel init and power,
3765 * and finally a dword of ms to sleep between power off and on
3768 * In the BIT versions, the table following the header serves as an
3769 * integrated config and xlat table: the records in the table are
3770 * indexed by the FP strap nibble in EXTDEV_BOOT, and each record has
3771 * two bytes - the first as a config byte, the second for indexing the
3772 * fp mode table pointed to by the BIT 'D' table
3774 * DDC is not used until after card init, so selecting the correct table
3775 * entry and setting the dual link flag for EDID equipped panels,
3776 * requiring tests against the native-mode pixel clock, cannot be done
3777 * until later, when this function should be called with non-zero pxclk
3779 struct drm_nouveau_private *dev_priv = dev->dev_private;
3780 struct nvbios *bios = &dev_priv->vbios;
3781 int fpstrapping = get_fp_strap(dev, bios), lvdsmanufacturerindex = 0;
3782 struct lvdstableheader lth;
3784 int ret, chip_version = bios->chip_version;
3786 ret = parse_lvds_manufacturer_table_header(dev, bios, <h);
3790 switch (lth.lvds_ver) {
3791 case 0x0a: /* pre NV40 */
3792 lvdsmanufacturerindex = bios->data[
3793 bios->fp.fpxlatemanufacturertableptr +
3796 /* we're done if this isn't the EDID panel case */
3800 if (chip_version < 0x25) {
3803 * It seems the old style lvds script pointer is reused
3804 * to select 18/24 bit colour depth for EDID panels.
3806 lvdsmanufacturerindex =
3807 (bios->legacy.lvds_single_a_script_ptr & 1) ?
3809 if (pxclk >= bios->fp.duallink_transition_clk)
3810 lvdsmanufacturerindex++;
3811 } else if (chip_version < 0x30) {
3812 /* nv28 behaviour (off-chip encoder)
3814 * nv28 does a complex dance of first using byte 121 of
3815 * the EDID to choose the lvdsmanufacturerindex, then
3816 * later attempting to match the EDID manufacturer and
3817 * product IDs in a table (signature 'pidt' (panel id
3818 * table?)), setting an lvdsmanufacturerindex of 0 and
3819 * an fp strap of the match index (or 0xf if none)
3821 lvdsmanufacturerindex = 0;
3823 /* nv31, nv34 behaviour */
3824 lvdsmanufacturerindex = 0;
3825 if (pxclk >= bios->fp.duallink_transition_clk)
3826 lvdsmanufacturerindex = 2;
3827 if (pxclk >= 140000)
3828 lvdsmanufacturerindex = 3;
3832 * nvidia set the high nibble of (cr57=f, cr58) to
3833 * lvdsmanufacturerindex in this case; we don't
3836 case 0x30: /* NV4x */
3837 case 0x40: /* G80/G90 */
3838 lvdsmanufacturerindex = fpstrapping;
3841 NV_ERROR(dev, "LVDS table revision not currently supported\n");
3845 lvdsofs = bios->fp.xlated_entry = bios->fp.lvdsmanufacturerpointer + lth.headerlen + lth.recordlen * lvdsmanufacturerindex;
3846 switch (lth.lvds_ver) {
3848 bios->fp.power_off_for_reset = bios->data[lvdsofs] & 1;
3849 bios->fp.reset_after_pclk_change = bios->data[lvdsofs] & 2;
3850 bios->fp.dual_link = bios->data[lvdsofs] & 4;
3851 bios->fp.link_c_increment = bios->data[lvdsofs] & 8;
3852 *if_is_24bit = bios->data[lvdsofs] & 16;
3857 * No sign of the "power off for reset" or "reset for panel
3858 * on" bits, but it's safer to assume we should
3860 bios->fp.power_off_for_reset = true;
3861 bios->fp.reset_after_pclk_change = true;
3864 * It's ok lvdsofs is wrong for nv4x edid case; dual_link is
3865 * over-written, and if_is_24bit isn't used
3867 bios->fp.dual_link = bios->data[lvdsofs] & 1;
3868 bios->fp.if_is_24bit = bios->data[lvdsofs] & 2;
3869 bios->fp.strapless_is_24bit = bios->data[bios->fp.lvdsmanufacturerpointer + 4];
3870 bios->fp.duallink_transition_clk = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 5]) * 10;
3874 /* Dell Latitude D620 reports a too-high value for the dual-link
3875 * transition freq, causing us to program the panel incorrectly.
3877 * It doesn't appear the VBIOS actually uses its transition freq
3878 * (90000kHz), instead it uses the "Number of LVDS channels" field
3879 * out of the panel ID structure (http://www.spwg.org/).
3881 * For the moment, a quirk will do :)
3883 if ((dev->pdev->device == 0x01d7) &&
3884 (dev->pdev->subsystem_vendor == 0x1028) &&
3885 (dev->pdev->subsystem_device == 0x01c2)) {
3886 bios->fp.duallink_transition_clk = 80000;
3889 /* set dual_link flag for EDID case */
3890 if (pxclk && (chip_version < 0x25 || chip_version > 0x28))
3891 bios->fp.dual_link = (pxclk >= bios->fp.duallink_transition_clk);
3893 *dl = bios->fp.dual_link;
3899 bios_output_config_match(struct drm_device *dev, struct dcb_entry *dcbent,
3900 uint16_t record, int record_len, int record_nr)
3902 struct drm_nouveau_private *dev_priv = dev->dev_private;
3903 struct nvbios *bios = &dev_priv->vbios;
3908 for (i = 0; i < record_nr; i++, record += record_len) {
3909 table = ROM16(bios->data[record]);
3912 entry = ROM32(bios->data[table]);
3914 v = (entry & 0x000f0000) >> 16;
3915 if (!(v & dcbent->or))
3918 v = (entry & 0x000000f0) >> 4;
3919 if (v != dcbent->location)
3922 v = (entry & 0x0000000f);
3923 if (v != dcbent->type)
3926 return &bios->data[table];
3933 nouveau_bios_dp_table(struct drm_device *dev, struct dcb_entry *dcbent,
3936 struct drm_nouveau_private *dev_priv = dev->dev_private;
3937 struct nvbios *bios = &dev_priv->vbios;
3940 if (!bios->display.dp_table_ptr) {
3941 NV_ERROR(dev, "No pointer to DisplayPort table\n");
3944 table = &bios->data[bios->display.dp_table_ptr];
3946 if (table[0] != 0x20 && table[0] != 0x21) {
3947 NV_ERROR(dev, "DisplayPort table version 0x%02x unknown\n",
3953 return bios_output_config_match(dev, dcbent,
3954 bios->display.dp_table_ptr + table[1],
3955 table[2], table[3]);
3959 nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent,
3960 uint32_t sub, int pxclk)
3963 * The display script table is located by the BIT 'U' table.
3965 * It contains an array of pointers to various tables describing
3966 * a particular output type. The first 32-bits of the output
3967 * tables contains similar information to a DCB entry, and is
3968 * used to decide whether that particular table is suitable for
3969 * the output you want to access.
3971 * The "record header length" field here seems to indicate the
3972 * offset of the first configuration entry in the output tables.
3973 * This is 10 on most cards I've seen, but 12 has been witnessed
3974 * on DP cards, and there's another script pointer within the
3977 * offset + 0 ( 8 bits): version
3978 * offset + 1 ( 8 bits): header length
3979 * offset + 2 ( 8 bits): record length
3980 * offset + 3 ( 8 bits): number of records
3981 * offset + 4 ( 8 bits): record header length
3982 * offset + 5 (16 bits): pointer to first output script table
3985 struct drm_nouveau_private *dev_priv = dev->dev_private;
3986 struct nvbios *bios = &dev_priv->vbios;
3987 uint8_t *table = &bios->data[bios->display.script_table_ptr];
3988 uint8_t *otable = NULL;
3992 if (!bios->display.script_table_ptr) {
3993 NV_ERROR(dev, "No pointer to output script table\n");
3998 * Nothing useful has been in any of the pre-2.0 tables I've seen,
3999 * so until they are, we really don't need to care.
4001 if (table[0] < 0x20)
4004 if (table[0] != 0x20 && table[0] != 0x21) {
4005 NV_ERROR(dev, "Output script table version 0x%02x unknown\n",
4011 * The output script tables describing a particular output type
4014 * offset + 0 (32 bits): output this table matches (hash of DCB)
4015 * offset + 4 ( 8 bits): unknown
4016 * offset + 5 ( 8 bits): number of configurations
4017 * offset + 6 (16 bits): pointer to some script
4018 * offset + 8 (16 bits): pointer to some script
4021 * offset + 10 : configuration 0
4024 * offset + 10 : pointer to some script
4025 * offset + 12 : configuration 0
4027 * Each config entry is as follows:
4029 * offset + 0 (16 bits): unknown, assumed to be a match value
4030 * offset + 2 (16 bits): pointer to script table (clock set?)
4031 * offset + 4 (16 bits): pointer to script table (reset?)
4033 * There doesn't appear to be a count value to say how many
4034 * entries exist in each script table, instead, a 0 value in
4035 * the first 16-bit word seems to indicate both the end of the
4036 * list and the default entry. The second 16-bit word in the
4037 * script tables is a pointer to the script to execute.
4040 NV_DEBUG_KMS(dev, "Searching for output entry for %d %d %d\n",
4041 dcbent->type, dcbent->location, dcbent->or);
4042 otable = bios_output_config_match(dev, dcbent, table[1] +
4043 bios->display.script_table_ptr,
4044 table[2], table[3]);
4046 NV_ERROR(dev, "Couldn't find matching output script table\n");
4050 if (pxclk < -2 || pxclk > 0) {
4051 /* Try to find matching script table entry */
4052 for (i = 0; i < otable[5]; i++) {
4053 if (ROM16(otable[table[4] + i*6]) == sub)
4057 if (i == otable[5]) {
4058 NV_ERROR(dev, "Table 0x%04x not found for %d/%d, "
4060 sub, dcbent->type, dcbent->or);
4066 script = ROM16(otable[6]);
4068 NV_DEBUG_KMS(dev, "output script 0 not found\n");
4072 NV_TRACE(dev, "0x%04X: parsing output script 0\n", script);
4073 nouveau_bios_run_init_table(dev, script, dcbent);
4076 script = ROM16(otable[8]);
4078 NV_DEBUG_KMS(dev, "output script 1 not found\n");
4082 NV_TRACE(dev, "0x%04X: parsing output script 1\n", script);
4083 nouveau_bios_run_init_table(dev, script, dcbent);
4087 script = ROM16(otable[10]);
4091 NV_DEBUG_KMS(dev, "output script 2 not found\n");
4095 NV_TRACE(dev, "0x%04X: parsing output script 2\n", script);
4096 nouveau_bios_run_init_table(dev, script, dcbent);
4099 script = ROM16(otable[table[4] + i*6 + 2]);
4101 script = clkcmptable(bios, script, pxclk);
4103 NV_ERROR(dev, "clock script 0 not found\n");
4107 NV_TRACE(dev, "0x%04X: parsing clock script 0\n", script);
4108 nouveau_bios_run_init_table(dev, script, dcbent);
4111 script = ROM16(otable[table[4] + i*6 + 4]);
4113 script = clkcmptable(bios, script, -pxclk);
4115 NV_DEBUG_KMS(dev, "clock script 1 not found\n");
4119 NV_TRACE(dev, "0x%04X: parsing clock script 1\n", script);
4120 nouveau_bios_run_init_table(dev, script, dcbent);
4127 int run_tmds_table(struct drm_device *dev, struct dcb_entry *dcbent, int head, int pxclk)
4130 * the pxclk parameter is in kHz
4132 * This runs the TMDS regs setting code found on BIT bios cards
4134 * For ffs(or) == 1 use the first table, for ffs(or) == 2 and
4135 * ffs(or) == 3, use the second.
4138 struct drm_nouveau_private *dev_priv = dev->dev_private;
4139 struct nvbios *bios = &dev_priv->vbios;
4140 int cv = bios->chip_version;
4141 uint16_t clktable = 0, scriptptr;
4142 uint32_t sel_clk_binding, sel_clk;
4144 /* pre-nv17 off-chip tmds uses scripts, post nv17 doesn't */
4145 if (cv >= 0x17 && cv != 0x1a && cv != 0x20 &&
4146 dcbent->location != DCB_LOC_ON_CHIP)
4149 switch (ffs(dcbent->or)) {
4151 clktable = bios->tmds.output0_script_ptr;
4155 clktable = bios->tmds.output1_script_ptr;
4160 NV_ERROR(dev, "Pixel clock comparison table not found\n");
4164 scriptptr = clkcmptable(bios, clktable, pxclk);
4167 NV_ERROR(dev, "TMDS output init script not found\n");
4171 /* don't let script change pll->head binding */
4172 sel_clk_binding = bios_rd32(bios, NV_PRAMDAC_SEL_CLK) & 0x50000;
4173 run_digital_op_script(dev, scriptptr, dcbent, head, pxclk >= 165000);
4174 sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK) & ~0x50000;
4175 NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, sel_clk | sel_clk_binding);
4180 int get_pll_limits(struct drm_device *dev, uint32_t limit_match, struct pll_lims *pll_lim)
4185 * Version 0x10: NV30, NV31
4186 * One byte header (version), one record of 24 bytes
4187 * Version 0x11: NV36 - Not implemented
4188 * Seems to have same record style as 0x10, but 3 records rather than 1
4189 * Version 0x20: Found on Geforce 6 cards
4190 * Trivial 4 byte BIT header. 31 (0x1f) byte record length
4191 * Version 0x21: Found on Geforce 7, 8 and some Geforce 6 cards
4192 * 5 byte header, fifth byte of unknown purpose. 35 (0x23) byte record
4193 * length in general, some (integrated) have an extra configuration byte
4194 * Version 0x30: Found on Geforce 8, separates the register mapping
4195 * from the limits tables.
4198 struct drm_nouveau_private *dev_priv = dev->dev_private;
4199 struct nvbios *bios = &dev_priv->vbios;
4200 int cv = bios->chip_version, pllindex = 0;
4201 uint8_t pll_lim_ver = 0, headerlen = 0, recordlen = 0, entries = 0;
4202 uint32_t crystal_strap_mask, crystal_straps;
4204 if (!bios->pll_limit_tbl_ptr) {
4205 if (cv == 0x30 || cv == 0x31 || cv == 0x35 || cv == 0x36 ||
4207 NV_ERROR(dev, "Pointer to PLL limits table invalid\n");
4211 pll_lim_ver = bios->data[bios->pll_limit_tbl_ptr];
4213 crystal_strap_mask = 1 << 6;
4214 /* open coded dev->twoHeads test */
4215 if (cv > 0x10 && cv != 0x15 && cv != 0x1a && cv != 0x20)
4216 crystal_strap_mask |= 1 << 22;
4217 crystal_straps = nvReadEXTDEV(dev, NV_PEXTDEV_BOOT_0) &
4220 switch (pll_lim_ver) {
4222 * We use version 0 to indicate a pre limit table bios (single stage
4223 * pll) and load the hard coded limits instead.
4230 * Strictly v0x11 has 3 entries, but the last two don't seem
4242 headerlen = bios->data[bios->pll_limit_tbl_ptr + 1];
4243 recordlen = bios->data[bios->pll_limit_tbl_ptr + 2];
4244 entries = bios->data[bios->pll_limit_tbl_ptr + 3];
4247 NV_ERROR(dev, "PLL limits table revision 0x%X not currently "
4248 "supported\n", pll_lim_ver);
4252 /* initialize all members to zero */
4253 memset(pll_lim, 0, sizeof(struct pll_lims));
4255 if (pll_lim_ver == 0x10 || pll_lim_ver == 0x11) {
4256 uint8_t *pll_rec = &bios->data[bios->pll_limit_tbl_ptr + headerlen + recordlen * pllindex];
4258 pll_lim->vco1.minfreq = ROM32(pll_rec[0]);
4259 pll_lim->vco1.maxfreq = ROM32(pll_rec[4]);
4260 pll_lim->vco2.minfreq = ROM32(pll_rec[8]);
4261 pll_lim->vco2.maxfreq = ROM32(pll_rec[12]);
4262 pll_lim->vco1.min_inputfreq = ROM32(pll_rec[16]);
4263 pll_lim->vco2.min_inputfreq = ROM32(pll_rec[20]);
4264 pll_lim->vco1.max_inputfreq = pll_lim->vco2.max_inputfreq = INT_MAX;
4266 /* these values taken from nv30/31/36 */
4267 pll_lim->vco1.min_n = 0x1;
4269 pll_lim->vco1.min_n = 0x5;
4270 pll_lim->vco1.max_n = 0xff;
4271 pll_lim->vco1.min_m = 0x1;
4272 pll_lim->vco1.max_m = 0xd;
4273 pll_lim->vco2.min_n = 0x4;
4275 * On nv30, 31, 36 (i.e. all cards with two stage PLLs with this
4276 * table version (apart from nv35)), N2 is compared to
4277 * maxN2 (0x46) and 10 * maxM2 (0x4), so set maxN2 to 0x28 and
4280 pll_lim->vco2.max_n = 0x28;
4281 if (cv == 0x30 || cv == 0x35)
4282 /* only 5 bits available for N2 on nv30/35 */
4283 pll_lim->vco2.max_n = 0x1f;
4284 pll_lim->vco2.min_m = 0x1;
4285 pll_lim->vco2.max_m = 0x4;
4286 pll_lim->max_log2p = 0x7;
4287 pll_lim->max_usable_log2p = 0x6;
4288 } else if (pll_lim_ver == 0x20 || pll_lim_ver == 0x21) {
4289 uint16_t plloffs = bios->pll_limit_tbl_ptr + headerlen;
4290 uint32_t reg = 0; /* default match */
4295 * First entry is default match, if nothing better. warn if
4298 if (ROM32(bios->data[plloffs]))
4299 NV_WARN(dev, "Default PLL limit entry has non-zero "
4300 "register field\n");
4302 if (limit_match > MAX_PLL_TYPES)
4303 /* we've been passed a reg as the match */
4305 else /* limit match is a pll type */
4306 for (i = 1; i < entries && !reg; i++) {
4307 uint32_t cmpreg = ROM32(bios->data[plloffs + recordlen * i]);
4309 if (limit_match == NVPLL &&
4310 (cmpreg == NV_PRAMDAC_NVPLL_COEFF || cmpreg == 0x4000))
4312 if (limit_match == MPLL &&
4313 (cmpreg == NV_PRAMDAC_MPLL_COEFF || cmpreg == 0x4020))
4315 if (limit_match == VPLL1 &&
4316 (cmpreg == NV_PRAMDAC_VPLL_COEFF || cmpreg == 0x4010))
4318 if (limit_match == VPLL2 &&
4319 (cmpreg == NV_RAMDAC_VPLL2 || cmpreg == 0x4018))
4323 for (i = 1; i < entries; i++)
4324 if (ROM32(bios->data[plloffs + recordlen * i]) == reg) {
4329 pll_rec = &bios->data[plloffs + recordlen * pllindex];
4331 BIOSLOG(bios, "Loading PLL limits for reg 0x%08x\n",
4332 pllindex ? reg : 0);
4335 * Frequencies are stored in tables in MHz, kHz are more
4336 * useful, so we convert.
4339 /* What output frequencies can each VCO generate? */
4340 pll_lim->vco1.minfreq = ROM16(pll_rec[4]) * 1000;
4341 pll_lim->vco1.maxfreq = ROM16(pll_rec[6]) * 1000;
4342 pll_lim->vco2.minfreq = ROM16(pll_rec[8]) * 1000;
4343 pll_lim->vco2.maxfreq = ROM16(pll_rec[10]) * 1000;
4345 /* What input frequencies they accept (past the m-divider)? */
4346 pll_lim->vco1.min_inputfreq = ROM16(pll_rec[12]) * 1000;
4347 pll_lim->vco2.min_inputfreq = ROM16(pll_rec[14]) * 1000;
4348 pll_lim->vco1.max_inputfreq = ROM16(pll_rec[16]) * 1000;
4349 pll_lim->vco2.max_inputfreq = ROM16(pll_rec[18]) * 1000;
4351 /* What values are accepted as multiplier and divider? */
4352 pll_lim->vco1.min_n = pll_rec[20];
4353 pll_lim->vco1.max_n = pll_rec[21];
4354 pll_lim->vco1.min_m = pll_rec[22];
4355 pll_lim->vco1.max_m = pll_rec[23];
4356 pll_lim->vco2.min_n = pll_rec[24];
4357 pll_lim->vco2.max_n = pll_rec[25];
4358 pll_lim->vco2.min_m = pll_rec[26];
4359 pll_lim->vco2.max_m = pll_rec[27];
4361 pll_lim->max_usable_log2p = pll_lim->max_log2p = pll_rec[29];
4362 if (pll_lim->max_log2p > 0x7)
4363 /* pll decoding in nv_hw.c assumes never > 7 */
4364 NV_WARN(dev, "Max log2 P value greater than 7 (%d)\n",
4365 pll_lim->max_log2p);
4367 pll_lim->max_usable_log2p = 0x6;
4368 pll_lim->log2p_bias = pll_rec[30];
4370 if (recordlen > 0x22)
4371 pll_lim->refclk = ROM32(pll_rec[31]);
4373 if (recordlen > 0x23 && pll_rec[35])
4375 "Bits set in PLL configuration byte (%x)\n",
4378 /* C51 special not seen elsewhere */
4379 if (cv == 0x51 && !pll_lim->refclk) {
4380 uint32_t sel_clk = bios_rd32(bios, NV_PRAMDAC_SEL_CLK);
4382 if (((limit_match == NV_PRAMDAC_VPLL_COEFF || limit_match == VPLL1) && sel_clk & 0x20) ||
4383 ((limit_match == NV_RAMDAC_VPLL2 || limit_match == VPLL2) && sel_clk & 0x80)) {
4384 if (bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_CHIP_ID_INDEX) < 0xa3)
4385 pll_lim->refclk = 200000;
4387 pll_lim->refclk = 25000;
4390 } else if (pll_lim_ver == 0x30) { /* ver 0x30 */
4391 uint8_t *entry = &bios->data[bios->pll_limit_tbl_ptr + headerlen];
4392 uint8_t *record = NULL;
4395 BIOSLOG(bios, "Loading PLL limits for register 0x%08x\n",
4398 for (i = 0; i < entries; i++, entry += recordlen) {
4399 if (ROM32(entry[3]) == limit_match) {
4400 record = &bios->data[ROM16(entry[1])];
4406 NV_ERROR(dev, "Register 0x%08x not found in PLL "
4407 "limits table", limit_match);
4411 pll_lim->vco1.minfreq = ROM16(record[0]) * 1000;
4412 pll_lim->vco1.maxfreq = ROM16(record[2]) * 1000;
4413 pll_lim->vco2.minfreq = ROM16(record[4]) * 1000;
4414 pll_lim->vco2.maxfreq = ROM16(record[6]) * 1000;
4415 pll_lim->vco1.min_inputfreq = ROM16(record[8]) * 1000;
4416 pll_lim->vco2.min_inputfreq = ROM16(record[10]) * 1000;
4417 pll_lim->vco1.max_inputfreq = ROM16(record[12]) * 1000;
4418 pll_lim->vco2.max_inputfreq = ROM16(record[14]) * 1000;
4419 pll_lim->vco1.min_n = record[16];
4420 pll_lim->vco1.max_n = record[17];
4421 pll_lim->vco1.min_m = record[18];
4422 pll_lim->vco1.max_m = record[19];
4423 pll_lim->vco2.min_n = record[20];
4424 pll_lim->vco2.max_n = record[21];
4425 pll_lim->vco2.min_m = record[22];
4426 pll_lim->vco2.max_m = record[23];
4427 pll_lim->max_usable_log2p = pll_lim->max_log2p = record[25];
4428 pll_lim->log2p_bias = record[27];
4429 pll_lim->refclk = ROM32(record[28]);
4430 } else if (pll_lim_ver) { /* ver 0x40 */
4431 uint8_t *entry = &bios->data[bios->pll_limit_tbl_ptr + headerlen];
4432 uint8_t *record = NULL;
4435 BIOSLOG(bios, "Loading PLL limits for register 0x%08x\n",
4438 for (i = 0; i < entries; i++, entry += recordlen) {
4439 if (ROM32(entry[3]) == limit_match) {
4440 record = &bios->data[ROM16(entry[1])];
4446 NV_ERROR(dev, "Register 0x%08x not found in PLL "
4447 "limits table", limit_match);
4451 pll_lim->vco1.minfreq = ROM16(record[0]) * 1000;
4452 pll_lim->vco1.maxfreq = ROM16(record[2]) * 1000;
4453 pll_lim->vco1.min_inputfreq = ROM16(record[4]) * 1000;
4454 pll_lim->vco1.max_inputfreq = ROM16(record[6]) * 1000;
4455 pll_lim->vco1.min_m = record[8];
4456 pll_lim->vco1.max_m = record[9];
4457 pll_lim->vco1.min_n = record[10];
4458 pll_lim->vco1.max_n = record[11];
4459 pll_lim->min_p = record[12];
4460 pll_lim->max_p = record[13];
4461 /* where did this go to?? */
4462 if (limit_match == 0x00614100 || limit_match == 0x00614900)
4463 pll_lim->refclk = 27000;
4465 pll_lim->refclk = 100000;
4469 * By now any valid limit table ought to have set a max frequency for
4470 * vco1, so if it's zero it's either a pre limit table bios, or one
4471 * with an empty limit table (seen on nv18)
4473 if (!pll_lim->vco1.maxfreq) {
4474 pll_lim->vco1.minfreq = bios->fminvco;
4475 pll_lim->vco1.maxfreq = bios->fmaxvco;
4476 pll_lim->vco1.min_inputfreq = 0;
4477 pll_lim->vco1.max_inputfreq = INT_MAX;
4478 pll_lim->vco1.min_n = 0x1;
4479 pll_lim->vco1.max_n = 0xff;
4480 pll_lim->vco1.min_m = 0x1;
4481 if (crystal_straps == 0) {
4482 /* nv05 does this, nv11 doesn't, nv10 unknown */
4484 pll_lim->vco1.min_m = 0x7;
4485 pll_lim->vco1.max_m = 0xd;
4488 pll_lim->vco1.min_m = 0x8;
4489 pll_lim->vco1.max_m = 0xe;
4491 if (cv < 0x17 || cv == 0x1a || cv == 0x20)
4492 pll_lim->max_log2p = 4;
4494 pll_lim->max_log2p = 5;
4495 pll_lim->max_usable_log2p = pll_lim->max_log2p;
4498 if (!pll_lim->refclk)
4499 switch (crystal_straps) {
4501 pll_lim->refclk = 13500;
4504 pll_lim->refclk = 14318;
4507 pll_lim->refclk = 27000;
4509 case (1 << 22 | 1 << 6):
4510 pll_lim->refclk = 25000;
4514 NV_DEBUG(dev, "pll.vco1.minfreq: %d\n", pll_lim->vco1.minfreq);
4515 NV_DEBUG(dev, "pll.vco1.maxfreq: %d\n", pll_lim->vco1.maxfreq);
4516 NV_DEBUG(dev, "pll.vco1.min_inputfreq: %d\n", pll_lim->vco1.min_inputfreq);
4517 NV_DEBUG(dev, "pll.vco1.max_inputfreq: %d\n", pll_lim->vco1.max_inputfreq);
4518 NV_DEBUG(dev, "pll.vco1.min_n: %d\n", pll_lim->vco1.min_n);
4519 NV_DEBUG(dev, "pll.vco1.max_n: %d\n", pll_lim->vco1.max_n);
4520 NV_DEBUG(dev, "pll.vco1.min_m: %d\n", pll_lim->vco1.min_m);
4521 NV_DEBUG(dev, "pll.vco1.max_m: %d\n", pll_lim->vco1.max_m);
4522 if (pll_lim->vco2.maxfreq) {
4523 NV_DEBUG(dev, "pll.vco2.minfreq: %d\n", pll_lim->vco2.minfreq);
4524 NV_DEBUG(dev, "pll.vco2.maxfreq: %d\n", pll_lim->vco2.maxfreq);
4525 NV_DEBUG(dev, "pll.vco2.min_inputfreq: %d\n", pll_lim->vco2.min_inputfreq);
4526 NV_DEBUG(dev, "pll.vco2.max_inputfreq: %d\n", pll_lim->vco2.max_inputfreq);
4527 NV_DEBUG(dev, "pll.vco2.min_n: %d\n", pll_lim->vco2.min_n);
4528 NV_DEBUG(dev, "pll.vco2.max_n: %d\n", pll_lim->vco2.max_n);
4529 NV_DEBUG(dev, "pll.vco2.min_m: %d\n", pll_lim->vco2.min_m);
4530 NV_DEBUG(dev, "pll.vco2.max_m: %d\n", pll_lim->vco2.max_m);
4532 if (!pll_lim->max_p) {
4533 NV_DEBUG(dev, "pll.max_log2p: %d\n", pll_lim->max_log2p);
4534 NV_DEBUG(dev, "pll.log2p_bias: %d\n", pll_lim->log2p_bias);
4536 NV_DEBUG(dev, "pll.min_p: %d\n", pll_lim->min_p);
4537 NV_DEBUG(dev, "pll.max_p: %d\n", pll_lim->max_p);
4539 NV_DEBUG(dev, "pll.refclk: %d\n", pll_lim->refclk);
4544 static void parse_bios_version(struct drm_device *dev, struct nvbios *bios, uint16_t offset)
4547 * offset + 0 (8 bits): Micro version
4548 * offset + 1 (8 bits): Minor version
4549 * offset + 2 (8 bits): Chip version
4550 * offset + 3 (8 bits): Major version
4553 bios->major_version = bios->data[offset + 3];
4554 bios->chip_version = bios->data[offset + 2];
4555 NV_TRACE(dev, "Bios version %02x.%02x.%02x.%02x\n",
4556 bios->data[offset + 3], bios->data[offset + 2],
4557 bios->data[offset + 1], bios->data[offset]);
4560 static void parse_script_table_pointers(struct nvbios *bios, uint16_t offset)
4563 * Parses the init table segment for pointers used in script execution.
4565 * offset + 0 (16 bits): init script tables pointer
4566 * offset + 2 (16 bits): macro index table pointer
4567 * offset + 4 (16 bits): macro table pointer
4568 * offset + 6 (16 bits): condition table pointer
4569 * offset + 8 (16 bits): io condition table pointer
4570 * offset + 10 (16 bits): io flag condition table pointer
4571 * offset + 12 (16 bits): init function table pointer
4574 bios->init_script_tbls_ptr = ROM16(bios->data[offset]);
4575 bios->macro_index_tbl_ptr = ROM16(bios->data[offset + 2]);
4576 bios->macro_tbl_ptr = ROM16(bios->data[offset + 4]);
4577 bios->condition_tbl_ptr = ROM16(bios->data[offset + 6]);
4578 bios->io_condition_tbl_ptr = ROM16(bios->data[offset + 8]);
4579 bios->io_flag_condition_tbl_ptr = ROM16(bios->data[offset + 10]);
4580 bios->init_function_tbl_ptr = ROM16(bios->data[offset + 12]);
4583 static int parse_bit_A_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
4586 * Parses the load detect values for g80 cards.
4588 * offset + 0 (16 bits): loadval table pointer
4591 uint16_t load_table_ptr;
4592 uint8_t version, headerlen, entrylen, num_entries;
4594 if (bitentry->length != 3) {
4595 NV_ERROR(dev, "Do not understand BIT A table\n");
4599 load_table_ptr = ROM16(bios->data[bitentry->offset]);
4601 if (load_table_ptr == 0x0) {
4602 NV_ERROR(dev, "Pointer to BIT loadval table invalid\n");
4606 version = bios->data[load_table_ptr];
4608 if (version != 0x10) {
4609 NV_ERROR(dev, "BIT loadval table version %d.%d not supported\n",
4610 version >> 4, version & 0xF);
4614 headerlen = bios->data[load_table_ptr + 1];
4615 entrylen = bios->data[load_table_ptr + 2];
4616 num_entries = bios->data[load_table_ptr + 3];
4618 if (headerlen != 4 || entrylen != 4 || num_entries != 2) {
4619 NV_ERROR(dev, "Do not understand BIT loadval table\n");
4623 /* First entry is normal dac, 2nd tv-out perhaps? */
4624 bios->dactestval = ROM32(bios->data[load_table_ptr + headerlen]) & 0x3ff;
4629 static int parse_bit_C_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
4632 * offset + 8 (16 bits): PLL limits table pointer
4634 * There's more in here, but that's unknown.
4637 if (bitentry->length < 10) {
4638 NV_ERROR(dev, "Do not understand BIT C table\n");
4642 bios->pll_limit_tbl_ptr = ROM16(bios->data[bitentry->offset + 8]);
4647 static int parse_bit_display_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
4650 * Parses the flat panel table segment that the bit entry points to.
4651 * Starting at bitentry->offset:
4653 * offset + 0 (16 bits): ??? table pointer - seems to have 18 byte
4654 * records beginning with a freq.
4655 * offset + 2 (16 bits): mode table pointer
4658 if (bitentry->length != 4) {
4659 NV_ERROR(dev, "Do not understand BIT display table\n");
4663 bios->fp.fptablepointer = ROM16(bios->data[bitentry->offset + 2]);
4668 static int parse_bit_init_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
4671 * Parses the init table segment that the bit entry points to.
4673 * See parse_script_table_pointers for layout
4676 if (bitentry->length < 14) {
4677 NV_ERROR(dev, "Do not understand init table\n");
4681 parse_script_table_pointers(bios, bitentry->offset);
4683 if (bitentry->length >= 16)
4684 bios->some_script_ptr = ROM16(bios->data[bitentry->offset + 14]);
4685 if (bitentry->length >= 18)
4686 bios->init96_tbl_ptr = ROM16(bios->data[bitentry->offset + 16]);
4691 static int parse_bit_i_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
4694 * BIT 'i' (info?) table
4696 * offset + 0 (32 bits): BIOS version dword (as in B table)
4697 * offset + 5 (8 bits): BIOS feature byte (same as for BMP?)
4698 * offset + 13 (16 bits): pointer to table containing DAC load
4699 * detection comparison values
4701 * There's other things in the table, purpose unknown
4704 uint16_t daccmpoffset;
4705 uint8_t dacver, dacheaderlen;
4707 if (bitentry->length < 6) {
4708 NV_ERROR(dev, "BIT i table too short for needed information\n");
4712 parse_bios_version(dev, bios, bitentry->offset);
4715 * bit 4 seems to indicate a mobile bios (doesn't suffer from BMP's
4716 * Quadro identity crisis), other bits possibly as for BMP feature byte
4718 bios->feature_byte = bios->data[bitentry->offset + 5];
4719 bios->is_mobile = bios->feature_byte & FEATURE_MOBILE;
4721 if (bitentry->length < 15) {
4722 NV_WARN(dev, "BIT i table not long enough for DAC load "
4723 "detection comparison table\n");
4727 daccmpoffset = ROM16(bios->data[bitentry->offset + 13]);
4729 /* doesn't exist on g80 */
4734 * The first value in the table, following the header, is the
4735 * comparison value, the second entry is a comparison value for
4736 * TV load detection.
4739 dacver = bios->data[daccmpoffset];
4740 dacheaderlen = bios->data[daccmpoffset + 1];
4742 if (dacver != 0x00 && dacver != 0x10) {
4743 NV_WARN(dev, "DAC load detection comparison table version "
4744 "%d.%d not known\n", dacver >> 4, dacver & 0xf);
4748 bios->dactestval = ROM32(bios->data[daccmpoffset + dacheaderlen]);
4749 bios->tvdactestval = ROM32(bios->data[daccmpoffset + dacheaderlen + 4]);
4754 static int parse_bit_lvds_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
4757 * Parses the LVDS table segment that the bit entry points to.
4758 * Starting at bitentry->offset:
4760 * offset + 0 (16 bits): LVDS strap xlate table pointer
4763 if (bitentry->length != 2) {
4764 NV_ERROR(dev, "Do not understand BIT LVDS table\n");
4769 * No idea if it's still called the LVDS manufacturer table, but
4770 * the concept's close enough.
4772 bios->fp.lvdsmanufacturerpointer = ROM16(bios->data[bitentry->offset]);
4778 parse_bit_M_tbl_entry(struct drm_device *dev, struct nvbios *bios,
4779 struct bit_entry *bitentry)
4782 * offset + 2 (8 bits): number of options in an
4783 * INIT_RAM_RESTRICT_ZM_REG_GROUP opcode option set
4784 * offset + 3 (16 bits): pointer to strap xlate table for RAM
4785 * restrict option selection
4787 * There's a bunch of bits in this table other than the RAM restrict
4788 * stuff that we don't use - their use currently unknown
4792 * Older bios versions don't have a sufficiently long table for
4795 if (bitentry->length < 0x5)
4798 if (bitentry->id[1] < 2) {
4799 bios->ram_restrict_group_count = bios->data[bitentry->offset + 2];
4800 bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 3]);
4802 bios->ram_restrict_group_count = bios->data[bitentry->offset + 0];
4803 bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 1]);
4809 static int parse_bit_tmds_tbl_entry(struct drm_device *dev, struct nvbios *bios, struct bit_entry *bitentry)
4812 * Parses the pointer to the TMDS table
4814 * Starting at bitentry->offset:
4816 * offset + 0 (16 bits): TMDS table pointer
4818 * The TMDS table is typically found just before the DCB table, with a
4819 * characteristic signature of 0x11,0x13 (1.1 being version, 0x13 being
4822 * At offset +7 is a pointer to a script, which I don't know how to
4824 * At offset +9 is a pointer to another script, likewise
4825 * Offset +11 has a pointer to a table where the first word is a pxclk
4826 * frequency and the second word a pointer to a script, which should be
4827 * run if the comparison pxclk frequency is less than the pxclk desired.
4828 * This repeats for decreasing comparison frequencies
4829 * Offset +13 has a pointer to a similar table
4830 * The selection of table (and possibly +7/+9 script) is dictated by
4831 * "or" from the DCB.
4834 uint16_t tmdstableptr, script1, script2;
4836 if (bitentry->length != 2) {
4837 NV_ERROR(dev, "Do not understand BIT TMDS table\n");
4841 tmdstableptr = ROM16(bios->data[bitentry->offset]);
4843 if (tmdstableptr == 0x0) {
4844 NV_ERROR(dev, "Pointer to TMDS table invalid\n");
4848 /* nv50+ has v2.0, but we don't parse it atm */
4849 if (bios->data[tmdstableptr] != 0x11) {
4851 "TMDS table revision %d.%d not currently supported\n",
4852 bios->data[tmdstableptr] >> 4, bios->data[tmdstableptr] & 0xf);
4857 * These two scripts are odd: they don't seem to get run even when
4858 * they are not stubbed.
4860 script1 = ROM16(bios->data[tmdstableptr + 7]);
4861 script2 = ROM16(bios->data[tmdstableptr + 9]);
4862 if (bios->data[script1] != 'q' || bios->data[script2] != 'q')
4863 NV_WARN(dev, "TMDS table script pointers not stubbed\n");
4865 bios->tmds.output0_script_ptr = ROM16(bios->data[tmdstableptr + 11]);
4866 bios->tmds.output1_script_ptr = ROM16(bios->data[tmdstableptr + 13]);
4872 parse_bit_U_tbl_entry(struct drm_device *dev, struct nvbios *bios,
4873 struct bit_entry *bitentry)
4876 * Parses the pointer to the G80 output script tables
4878 * Starting at bitentry->offset:
4880 * offset + 0 (16 bits): output script table pointer
4883 uint16_t outputscripttableptr;
4885 if (bitentry->length != 3) {
4886 NV_ERROR(dev, "Do not understand BIT U table\n");
4890 outputscripttableptr = ROM16(bios->data[bitentry->offset]);
4891 bios->display.script_table_ptr = outputscripttableptr;
4896 parse_bit_displayport_tbl_entry(struct drm_device *dev, struct nvbios *bios,
4897 struct bit_entry *bitentry)
4899 bios->display.dp_table_ptr = ROM16(bios->data[bitentry->offset]);
4905 int (* const parse_fn)(struct drm_device *, struct nvbios *, struct bit_entry *);
4908 #define BIT_TABLE(id, funcid) ((struct bit_table){ id, parse_bit_##funcid##_tbl_entry })
4911 parse_bit_table(struct nvbios *bios, const uint16_t bitoffset,
4912 struct bit_table *table)
4914 struct drm_device *dev = bios->dev;
4915 uint8_t maxentries = bios->data[bitoffset + 4];
4917 struct bit_entry bitentry;
4919 for (i = 0, offset = bitoffset + 6; i < maxentries; i++, offset += 6) {
4920 bitentry.id[0] = bios->data[offset];
4922 if (bitentry.id[0] != table->id)
4925 bitentry.id[1] = bios->data[offset + 1];
4926 bitentry.length = ROM16(bios->data[offset + 2]);
4927 bitentry.offset = ROM16(bios->data[offset + 4]);
4929 return table->parse_fn(dev, bios, &bitentry);
4932 NV_INFO(dev, "BIT table '%c' not found\n", table->id);
4937 parse_bit_structure(struct nvbios *bios, const uint16_t bitoffset)
4942 * The only restriction on parsing order currently is having 'i' first
4943 * for use of bios->*_version or bios->feature_byte while parsing;
4944 * functions shouldn't be actually *doing* anything apart from pulling
4945 * data from the image into the bios struct, thus no interdependencies
4947 ret = parse_bit_table(bios, bitoffset, &BIT_TABLE('i', i));
4948 if (ret) /* info? */
4950 if (bios->major_version >= 0x60) /* g80+ */
4951 parse_bit_table(bios, bitoffset, &BIT_TABLE('A', A));
4952 ret = parse_bit_table(bios, bitoffset, &BIT_TABLE('C', C));
4955 parse_bit_table(bios, bitoffset, &BIT_TABLE('D', display));
4956 ret = parse_bit_table(bios, bitoffset, &BIT_TABLE('I', init));
4959 parse_bit_table(bios, bitoffset, &BIT_TABLE('M', M)); /* memory? */
4960 parse_bit_table(bios, bitoffset, &BIT_TABLE('L', lvds));
4961 parse_bit_table(bios, bitoffset, &BIT_TABLE('T', tmds));
4962 parse_bit_table(bios, bitoffset, &BIT_TABLE('U', U));
4963 parse_bit_table(bios, bitoffset, &BIT_TABLE('d', displayport));
4968 static int parse_bmp_structure(struct drm_device *dev, struct nvbios *bios, unsigned int offset)
4971 * Parses the BMP structure for useful things, but does not act on them
4973 * offset + 5: BMP major version
4974 * offset + 6: BMP minor version
4975 * offset + 9: BMP feature byte
4976 * offset + 10: BCD encoded BIOS version
4978 * offset + 18: init script table pointer (for bios versions < 5.10h)
4979 * offset + 20: extra init script table pointer (for bios
4982 * offset + 24: memory init table pointer (used on early bios versions)
4983 * offset + 26: SDR memory sequencing setup data table
4984 * offset + 28: DDR memory sequencing setup data table
4986 * offset + 54: index of I2C CRTC pair to use for CRT output
4987 * offset + 55: index of I2C CRTC pair to use for TV output
4988 * offset + 56: index of I2C CRTC pair to use for flat panel output
4989 * offset + 58: write CRTC index for I2C pair 0
4990 * offset + 59: read CRTC index for I2C pair 0
4991 * offset + 60: write CRTC index for I2C pair 1
4992 * offset + 61: read CRTC index for I2C pair 1
4994 * offset + 67: maximum internal PLL frequency (single stage PLL)
4995 * offset + 71: minimum internal PLL frequency (single stage PLL)
4997 * offset + 75: script table pointers, as described in
4998 * parse_script_table_pointers
5000 * offset + 89: TMDS single link output A table pointer
5001 * offset + 91: TMDS single link output B table pointer
5002 * offset + 95: LVDS single link output A table pointer
5003 * offset + 105: flat panel timings table pointer
5004 * offset + 107: flat panel strapping translation table pointer
5005 * offset + 117: LVDS manufacturer panel config table pointer
5006 * offset + 119: LVDS manufacturer strapping translation table pointer
5008 * offset + 142: PLL limits table pointer
5010 * offset + 156: minimum pixel clock for LVDS dual link
5013 uint8_t *bmp = &bios->data[offset], bmp_version_major, bmp_version_minor;
5015 uint16_t legacy_scripts_offset, legacy_i2c_offset;
5017 /* load needed defaults in case we can't parse this info */
5018 bios->dcb.i2c[0].write = NV_CIO_CRE_DDC_WR__INDEX;
5019 bios->dcb.i2c[0].read = NV_CIO_CRE_DDC_STATUS__INDEX;
5020 bios->dcb.i2c[1].write = NV_CIO_CRE_DDC0_WR__INDEX;
5021 bios->dcb.i2c[1].read = NV_CIO_CRE_DDC0_STATUS__INDEX;
5022 bios->digital_min_front_porch = 0x4b;
5023 bios->fmaxvco = 256000;
5024 bios->fminvco = 128000;
5025 bios->fp.duallink_transition_clk = 90000;
5027 bmp_version_major = bmp[5];
5028 bmp_version_minor = bmp[6];
5030 NV_TRACE(dev, "BMP version %d.%d\n",
5031 bmp_version_major, bmp_version_minor);
5034 * Make sure that 0x36 is blank and can't be mistaken for a DCB
5035 * pointer on early versions
5037 if (bmp_version_major < 5)
5038 *(uint16_t *)&bios->data[0x36] = 0;
5041 * Seems that the minor version was 1 for all major versions prior
5042 * to 5. Version 6 could theoretically exist, but I suspect BIT
5045 if ((bmp_version_major < 5 && bmp_version_minor != 1) || bmp_version_major > 5) {
5046 NV_ERROR(dev, "You have an unsupported BMP version. "
5047 "Please send in your bios\n");
5051 if (bmp_version_major == 0)
5052 /* nothing that's currently useful in this version */
5054 else if (bmp_version_major == 1)
5055 bmplength = 44; /* exact for 1.01 */
5056 else if (bmp_version_major == 2)
5057 bmplength = 48; /* exact for 2.01 */
5058 else if (bmp_version_major == 3)
5060 /* guessed - mem init tables added in this version */
5061 else if (bmp_version_major == 4 || bmp_version_minor < 0x1)
5062 /* don't know if 5.0 exists... */
5064 /* guessed - BMP I2C indices added in version 4*/
5065 else if (bmp_version_minor < 0x6)
5066 bmplength = 67; /* exact for 5.01 */
5067 else if (bmp_version_minor < 0x10)
5068 bmplength = 75; /* exact for 5.06 */
5069 else if (bmp_version_minor == 0x10)
5070 bmplength = 89; /* exact for 5.10h */
5071 else if (bmp_version_minor < 0x14)
5072 bmplength = 118; /* exact for 5.11h */
5073 else if (bmp_version_minor < 0x24)
5075 * Not sure of version where pll limits came in;
5076 * certainly exist by 0x24 though.
5078 /* length not exact: this is long enough to get lvds members */
5080 else if (bmp_version_minor < 0x27)
5082 * Length not exact: this is long enough to get pll limit
5088 * Length not exact: this is long enough to get dual link
5094 if (nv_cksum(bmp, 8)) {
5095 NV_ERROR(dev, "Bad BMP checksum\n");
5100 * Bit 4 seems to indicate either a mobile bios or a quadro card --
5101 * mobile behaviour consistent (nv11+), quadro only seen nv18gl-nv36gl
5102 * (not nv10gl), bit 5 that the flat panel tables are present, and
5105 bios->feature_byte = bmp[9];
5107 parse_bios_version(dev, bios, offset + 10);
5109 if (bmp_version_major < 5 || bmp_version_minor < 0x10)
5110 bios->old_style_init = true;
5111 legacy_scripts_offset = 18;
5112 if (bmp_version_major < 2)
5113 legacy_scripts_offset -= 4;
5114 bios->init_script_tbls_ptr = ROM16(bmp[legacy_scripts_offset]);
5115 bios->extra_init_script_tbl_ptr = ROM16(bmp[legacy_scripts_offset + 2]);
5117 if (bmp_version_major > 2) { /* appears in BMP 3 */
5118 bios->legacy.mem_init_tbl_ptr = ROM16(bmp[24]);
5119 bios->legacy.sdr_seq_tbl_ptr = ROM16(bmp[26]);
5120 bios->legacy.ddr_seq_tbl_ptr = ROM16(bmp[28]);
5123 legacy_i2c_offset = 0x48; /* BMP version 2 & 3 */
5125 legacy_i2c_offset = offset + 54;
5126 bios->legacy.i2c_indices.crt = bios->data[legacy_i2c_offset];
5127 bios->legacy.i2c_indices.tv = bios->data[legacy_i2c_offset + 1];
5128 bios->legacy.i2c_indices.panel = bios->data[legacy_i2c_offset + 2];
5129 bios->dcb.i2c[0].write = bios->data[legacy_i2c_offset + 4];
5130 bios->dcb.i2c[0].read = bios->data[legacy_i2c_offset + 5];
5131 bios->dcb.i2c[1].write = bios->data[legacy_i2c_offset + 6];
5132 bios->dcb.i2c[1].read = bios->data[legacy_i2c_offset + 7];
5134 if (bmplength > 74) {
5135 bios->fmaxvco = ROM32(bmp[67]);
5136 bios->fminvco = ROM32(bmp[71]);
5139 parse_script_table_pointers(bios, offset + 75);
5140 if (bmplength > 94) {
5141 bios->tmds.output0_script_ptr = ROM16(bmp[89]);
5142 bios->tmds.output1_script_ptr = ROM16(bmp[91]);
5144 * Never observed in use with lvds scripts, but is reused for
5145 * 18/24 bit panel interface default for EDID equipped panels
5146 * (if_is_24bit not set directly to avoid any oscillation).
5148 bios->legacy.lvds_single_a_script_ptr = ROM16(bmp[95]);
5150 if (bmplength > 108) {
5151 bios->fp.fptablepointer = ROM16(bmp[105]);
5152 bios->fp.fpxlatetableptr = ROM16(bmp[107]);
5153 bios->fp.xlatwidth = 1;
5155 if (bmplength > 120) {
5156 bios->fp.lvdsmanufacturerpointer = ROM16(bmp[117]);
5157 bios->fp.fpxlatemanufacturertableptr = ROM16(bmp[119]);
5159 if (bmplength > 143)
5160 bios->pll_limit_tbl_ptr = ROM16(bmp[142]);
5162 if (bmplength > 157)
5163 bios->fp.duallink_transition_clk = ROM16(bmp[156]) * 10;
5168 static uint16_t findstr(uint8_t *data, int n, const uint8_t *str, int len)
5172 for (i = 0; i <= (n - len); i++) {
5173 for (j = 0; j < len; j++)
5174 if (data[i + j] != str[j])
5183 static struct dcb_gpio_entry *
5184 new_gpio_entry(struct nvbios *bios)
5186 struct dcb_gpio_table *gpio = &bios->dcb.gpio;
5188 return &gpio->entry[gpio->entries++];
5191 struct dcb_gpio_entry *
5192 nouveau_bios_gpio_entry(struct drm_device *dev, enum dcb_gpio_tag tag)
5194 struct drm_nouveau_private *dev_priv = dev->dev_private;
5195 struct nvbios *bios = &dev_priv->vbios;
5198 for (i = 0; i < bios->dcb.gpio.entries; i++) {
5199 if (bios->dcb.gpio.entry[i].tag != tag)
5202 return &bios->dcb.gpio.entry[i];
5209 parse_dcb30_gpio_entry(struct nvbios *bios, uint16_t offset)
5211 struct dcb_gpio_entry *gpio;
5212 uint16_t ent = ROM16(bios->data[offset]);
5213 uint8_t line = ent & 0x1f,
5214 tag = ent >> 5 & 0x3f,
5215 flags = ent >> 11 & 0x1f;
5220 gpio = new_gpio_entry(bios);
5224 gpio->invert = flags != 4;
5229 parse_dcb40_gpio_entry(struct nvbios *bios, uint16_t offset)
5231 uint32_t entry = ROM32(bios->data[offset]);
5232 struct dcb_gpio_entry *gpio;
5234 if ((entry & 0x0000ff00) == 0x0000ff00)
5237 gpio = new_gpio_entry(bios);
5238 gpio->tag = (entry & 0x0000ff00) >> 8;
5239 gpio->line = (entry & 0x0000001f) >> 0;
5240 gpio->state_default = (entry & 0x01000000) >> 24;
5241 gpio->state[0] = (entry & 0x18000000) >> 27;
5242 gpio->state[1] = (entry & 0x60000000) >> 29;
5243 gpio->entry = entry;
5247 parse_dcb_gpio_table(struct nvbios *bios)
5249 struct drm_device *dev = bios->dev;
5250 uint16_t gpio_table_ptr = bios->dcb.gpio_table_ptr;
5251 uint8_t *gpio_table = &bios->data[gpio_table_ptr];
5252 int header_len = gpio_table[1],
5253 entries = gpio_table[2],
5254 entry_len = gpio_table[3];
5255 void (*parse_entry)(struct nvbios *, uint16_t) = NULL;
5258 if (bios->dcb.version >= 0x40) {
5259 if (gpio_table_ptr && entry_len != 4) {
5260 NV_WARN(dev, "Invalid DCB GPIO table entry length.\n");
5264 parse_entry = parse_dcb40_gpio_entry;
5266 } else if (bios->dcb.version >= 0x30) {
5267 if (gpio_table_ptr && entry_len != 2) {
5268 NV_WARN(dev, "Invalid DCB GPIO table entry length.\n");
5272 parse_entry = parse_dcb30_gpio_entry;
5274 } else if (bios->dcb.version >= 0x22) {
5276 * DCBs older than v3.0 don't really have a GPIO
5277 * table, instead they keep some GPIO info at fixed
5280 uint16_t dcbptr = ROM16(bios->data[0x36]);
5281 uint8_t *tvdac_gpio = &bios->data[dcbptr - 5];
5283 if (tvdac_gpio[0] & 1) {
5284 struct dcb_gpio_entry *gpio = new_gpio_entry(bios);
5286 gpio->tag = DCB_GPIO_TVDAC0;
5287 gpio->line = tvdac_gpio[1] >> 4;
5288 gpio->invert = tvdac_gpio[0] & 2;
5292 if (!gpio_table_ptr)
5295 if (entries > DCB_MAX_NUM_GPIO_ENTRIES) {
5296 NV_WARN(dev, "Too many entries in the DCB GPIO table.\n");
5297 entries = DCB_MAX_NUM_GPIO_ENTRIES;
5300 for (i = 0; i < entries; i++)
5301 parse_entry(bios, gpio_table_ptr + header_len + entry_len * i);
5304 struct dcb_connector_table_entry *
5305 nouveau_bios_connector_entry(struct drm_device *dev, int index)
5307 struct drm_nouveau_private *dev_priv = dev->dev_private;
5308 struct nvbios *bios = &dev_priv->vbios;
5309 struct dcb_connector_table_entry *cte;
5311 if (index >= bios->dcb.connector.entries)
5314 cte = &bios->dcb.connector.entry[index];
5315 if (cte->type == 0xff)
5321 static enum dcb_connector_type
5322 divine_connector_type(struct nvbios *bios, int index)
5324 struct dcb_table *dcb = &bios->dcb;
5325 unsigned encoders = 0, type = DCB_CONNECTOR_NONE;
5328 for (i = 0; i < dcb->entries; i++) {
5329 if (dcb->entry[i].connector == index)
5330 encoders |= (1 << dcb->entry[i].type);
5333 if (encoders & (1 << OUTPUT_DP)) {
5334 if (encoders & (1 << OUTPUT_TMDS))
5335 type = DCB_CONNECTOR_DP;
5337 type = DCB_CONNECTOR_eDP;
5339 if (encoders & (1 << OUTPUT_TMDS)) {
5340 if (encoders & (1 << OUTPUT_ANALOG))
5341 type = DCB_CONNECTOR_DVI_I;
5343 type = DCB_CONNECTOR_DVI_D;
5345 if (encoders & (1 << OUTPUT_ANALOG)) {
5346 type = DCB_CONNECTOR_VGA;
5348 if (encoders & (1 << OUTPUT_LVDS)) {
5349 type = DCB_CONNECTOR_LVDS;
5351 if (encoders & (1 << OUTPUT_TV)) {
5352 type = DCB_CONNECTOR_TV_0;
5359 apply_dcb_connector_quirks(struct nvbios *bios, int idx)
5361 struct dcb_connector_table_entry *cte = &bios->dcb.connector.entry[idx];
5362 struct drm_device *dev = bios->dev;
5364 /* Gigabyte NX85T */
5365 if ((dev->pdev->device == 0x0421) &&
5366 (dev->pdev->subsystem_vendor == 0x1458) &&
5367 (dev->pdev->subsystem_device == 0x344c)) {
5368 if (cte->type == DCB_CONNECTOR_HDMI_1)
5369 cte->type = DCB_CONNECTOR_DVI_I;
5374 parse_dcb_connector_table(struct nvbios *bios)
5376 struct drm_device *dev = bios->dev;
5377 struct dcb_connector_table *ct = &bios->dcb.connector;
5378 struct dcb_connector_table_entry *cte;
5379 uint8_t *conntab = &bios->data[bios->dcb.connector_table_ptr];
5383 if (!bios->dcb.connector_table_ptr) {
5384 NV_DEBUG_KMS(dev, "No DCB connector table present\n");
5388 NV_INFO(dev, "DCB connector table: VHER 0x%02x %d %d %d\n",
5389 conntab[0], conntab[1], conntab[2], conntab[3]);
5390 if ((conntab[0] != 0x30 && conntab[0] != 0x40) ||
5391 (conntab[3] != 2 && conntab[3] != 4)) {
5392 NV_ERROR(dev, " Unknown! Please report.\n");
5396 ct->entries = conntab[2];
5398 entry = conntab + conntab[1];
5399 cte = &ct->entry[0];
5400 for (i = 0; i < conntab[2]; i++, entry += conntab[3], cte++) {
5402 if (conntab[3] == 2)
5403 cte->entry = ROM16(entry[0]);
5405 cte->entry = ROM32(entry[0]);
5407 cte->type = (cte->entry & 0x000000ff) >> 0;
5408 cte->index2 = (cte->entry & 0x00000f00) >> 8;
5409 switch (cte->entry & 0x00033000) {
5411 cte->gpio_tag = 0x07;
5414 cte->gpio_tag = 0x08;
5417 cte->gpio_tag = 0x51;
5420 cte->gpio_tag = 0x52;
5423 cte->gpio_tag = 0xff;
5427 if (cte->type == 0xff)
5430 apply_dcb_connector_quirks(bios, i);
5432 NV_INFO(dev, " %d: 0x%08x: type 0x%02x idx %d tag 0x%02x\n",
5433 i, cte->entry, cte->type, cte->index, cte->gpio_tag);
5435 /* check for known types, fallback to guessing the type
5436 * from attached encoders if we hit an unknown.
5438 switch (cte->type) {
5439 case DCB_CONNECTOR_VGA:
5440 case DCB_CONNECTOR_TV_0:
5441 case DCB_CONNECTOR_TV_1:
5442 case DCB_CONNECTOR_TV_3:
5443 case DCB_CONNECTOR_DVI_I:
5444 case DCB_CONNECTOR_DVI_D:
5445 case DCB_CONNECTOR_LVDS:
5446 case DCB_CONNECTOR_DP:
5447 case DCB_CONNECTOR_eDP:
5448 case DCB_CONNECTOR_HDMI_0:
5449 case DCB_CONNECTOR_HDMI_1:
5452 cte->type = divine_connector_type(bios, cte->index);
5453 NV_WARN(dev, "unknown type, using 0x%02x\n", cte->type);
5457 if (nouveau_override_conntype) {
5458 int type = divine_connector_type(bios, cte->index);
5459 if (type != cte->type)
5460 NV_WARN(dev, " -> type 0x%02x\n", cte->type);
5466 static struct dcb_entry *new_dcb_entry(struct dcb_table *dcb)
5468 struct dcb_entry *entry = &dcb->entry[dcb->entries];
5470 memset(entry, 0, sizeof(struct dcb_entry));
5471 entry->index = dcb->entries++;
5476 static void fabricate_vga_output(struct dcb_table *dcb, int i2c, int heads)
5478 struct dcb_entry *entry = new_dcb_entry(dcb);
5481 entry->i2c_index = i2c;
5482 entry->heads = heads;
5483 entry->location = DCB_LOC_ON_CHIP;
5484 /* "or" mostly unused in early gen crt modesetting, 0 is fine */
5487 static void fabricate_dvi_i_output(struct dcb_table *dcb, bool twoHeads)
5489 struct dcb_entry *entry = new_dcb_entry(dcb);
5492 entry->i2c_index = LEGACY_I2C_PANEL;
5493 entry->heads = twoHeads ? 3 : 1;
5494 entry->location = !DCB_LOC_ON_CHIP; /* ie OFF CHIP */
5495 entry->or = 1; /* means |0x10 gets set on CRE_LCD__INDEX */
5496 entry->duallink_possible = false; /* SiI164 and co. are single link */
5500 * For dvi-a either crtc probably works, but my card appears to only
5501 * support dvi-d. "nvidia" still attempts to program it for dvi-a,
5502 * doing the full fp output setup (program 0x6808.. fp dimension regs,
5503 * setting 0x680848 to 0x10000111 to enable, maybe setting 0x680880);
5504 * the monitor picks up the mode res ok and lights up, but no pixel
5505 * data appears, so the board manufacturer probably connected up the
5506 * sync lines, but missed the video traces / components
5508 * with this introduction, dvi-a left as an exercise for the reader.
5510 fabricate_vga_output(dcb, LEGACY_I2C_PANEL, entry->heads);
5514 static void fabricate_tv_output(struct dcb_table *dcb, bool twoHeads)
5516 struct dcb_entry *entry = new_dcb_entry(dcb);
5519 entry->i2c_index = LEGACY_I2C_TV;
5520 entry->heads = twoHeads ? 3 : 1;
5521 entry->location = !DCB_LOC_ON_CHIP; /* ie OFF CHIP */
5525 parse_dcb20_entry(struct drm_device *dev, struct dcb_table *dcb,
5526 uint32_t conn, uint32_t conf, struct dcb_entry *entry)
5528 entry->type = conn & 0xf;
5529 entry->i2c_index = (conn >> 4) & 0xf;
5530 entry->heads = (conn >> 8) & 0xf;
5531 if (dcb->version >= 0x40)
5532 entry->connector = (conn >> 12) & 0xf;
5533 entry->bus = (conn >> 16) & 0xf;
5534 entry->location = (conn >> 20) & 0x3;
5535 entry->or = (conn >> 24) & 0xf;
5537 * Normal entries consist of a single bit, but dual link has the
5538 * next most significant bit set too
5540 entry->duallink_possible =
5541 ((1 << (ffs(entry->or) - 1)) * 3 == entry->or);
5543 switch (entry->type) {
5546 * Although the rest of a CRT conf dword is usually
5547 * zeros, mac biosen have stuff there so we must mask
5549 entry->crtconf.maxfreq = (dcb->version < 0x30) ?
5550 (conf & 0xffff) * 10 :
5551 (conf & 0xff) * 10000;
5557 entry->lvdsconf.use_straps_for_mode = true;
5558 if (dcb->version < 0x22) {
5561 * The laptop in bug 14567 lies and claims to not use
5562 * straps when it does, so assume all DCB 2.0 laptops
5563 * use straps, until a broken EDID using one is produced
5565 entry->lvdsconf.use_straps_for_mode = true;
5567 * Both 0x4 and 0x8 show up in v2.0 tables; assume they
5568 * mean the same thing (probably wrong, but might work)
5570 if (conf & 0x4 || conf & 0x8)
5571 entry->lvdsconf.use_power_scripts = true;
5575 entry->lvdsconf.use_power_scripts = true;
5579 * Until we even try to use these on G8x, it's
5580 * useless reporting unknown bits. They all are.
5582 if (dcb->version >= 0x40)
5585 NV_ERROR(dev, "Unknown LVDS configuration bits, "
5592 if (dcb->version >= 0x30)
5593 entry->tvconf.has_component_output = conf & (0x8 << 4);
5595 entry->tvconf.has_component_output = false;
5600 entry->dpconf.sor.link = (conf & 0x00000030) >> 4;
5601 entry->dpconf.link_bw = (conf & 0x00e00000) >> 21;
5602 switch ((conf & 0x0f000000) >> 24) {
5604 entry->dpconf.link_nr = 4;
5607 entry->dpconf.link_nr = 2;
5610 entry->dpconf.link_nr = 1;
5615 entry->tmdsconf.sor.link = (conf & 0x00000030) >> 4;
5618 /* weird g80 mobile type that "nv" treats as a terminator */
5625 /* unsure what DCB version introduces this, 3.0? */
5626 if (conf & 0x100000)
5627 entry->i2c_upper_default = true;
5633 parse_dcb15_entry(struct drm_device *dev, struct dcb_table *dcb,
5634 uint32_t conn, uint32_t conf, struct dcb_entry *entry)
5636 switch (conn & 0x0000000f) {
5638 entry->type = OUTPUT_ANALOG;
5641 entry->type = OUTPUT_TV;
5645 entry->type = OUTPUT_LVDS;
5648 switch ((conn & 0x000000f0) >> 4) {
5650 entry->type = OUTPUT_TMDS;
5653 entry->type = OUTPUT_LVDS;
5656 NV_ERROR(dev, "Unknown DCB subtype 4/%d\n",
5657 (conn & 0x000000f0) >> 4);
5662 NV_ERROR(dev, "Unknown DCB type %d\n", conn & 0x0000000f);
5666 entry->i2c_index = (conn & 0x0003c000) >> 14;
5667 entry->heads = ((conn & 0x001c0000) >> 18) + 1;
5668 entry->or = entry->heads; /* same as heads, hopefully safe enough */
5669 entry->location = (conn & 0x01e00000) >> 21;
5670 entry->bus = (conn & 0x0e000000) >> 25;
5671 entry->duallink_possible = false;
5673 switch (entry->type) {
5675 entry->crtconf.maxfreq = (conf & 0xffff) * 10;
5678 entry->tvconf.has_component_output = false;
5682 * Invent a DVI-A output, by copying the fields of the DVI-D
5683 * output; reported to work by math_b on an NV20(!).
5685 fabricate_vga_output(dcb, entry->i2c_index, entry->heads);
5688 if ((conn & 0x00003f00) != 0x10)
5689 entry->lvdsconf.use_straps_for_mode = true;
5690 entry->lvdsconf.use_power_scripts = true;
5699 static bool parse_dcb_entry(struct drm_device *dev, struct dcb_table *dcb,
5700 uint32_t conn, uint32_t conf)
5702 struct dcb_entry *entry = new_dcb_entry(dcb);
5705 if (dcb->version >= 0x20)
5706 ret = parse_dcb20_entry(dev, dcb, conn, conf, entry);
5708 ret = parse_dcb15_entry(dev, dcb, conn, conf, entry);
5712 read_dcb_i2c_entry(dev, dcb->version, dcb->i2c_table,
5713 entry->i2c_index, &dcb->i2c[entry->i2c_index]);
5719 void merge_like_dcb_entries(struct drm_device *dev, struct dcb_table *dcb)
5722 * DCB v2.0 lists each output combination separately.
5723 * Here we merge compatible entries to have fewer outputs, with
5727 int i, newentries = 0;
5729 for (i = 0; i < dcb->entries; i++) {
5730 struct dcb_entry *ient = &dcb->entry[i];
5733 for (j = i + 1; j < dcb->entries; j++) {
5734 struct dcb_entry *jent = &dcb->entry[j];
5736 if (jent->type == 100) /* already merged entry */
5739 /* merge heads field when all other fields the same */
5740 if (jent->i2c_index == ient->i2c_index &&
5741 jent->type == ient->type &&
5742 jent->location == ient->location &&
5743 jent->or == ient->or) {
5744 NV_TRACE(dev, "Merging DCB entries %d and %d\n",
5746 ient->heads |= jent->heads;
5747 jent->type = 100; /* dummy value */
5752 /* Compact entries merged into others out of dcb */
5753 for (i = 0; i < dcb->entries; i++) {
5754 if (dcb->entry[i].type == 100)
5757 if (newentries != i) {
5758 dcb->entry[newentries] = dcb->entry[i];
5759 dcb->entry[newentries].index = newentries;
5764 dcb->entries = newentries;
5768 parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
5770 struct drm_nouveau_private *dev_priv = dev->dev_private;
5771 struct dcb_table *dcb = &bios->dcb;
5772 uint16_t dcbptr = 0, i2ctabptr = 0;
5774 uint8_t headerlen = 0x4, entries = DCB_MAX_NUM_ENTRIES;
5775 bool configblock = true;
5776 int recordlength = 8, confofs = 4;
5779 /* get the offset from 0x36 */
5780 if (dev_priv->card_type > NV_04) {
5781 dcbptr = ROM16(bios->data[0x36]);
5782 if (dcbptr == 0x0000)
5783 NV_WARN(dev, "No output data (DCB) found in BIOS\n");
5786 /* this situation likely means a really old card, pre DCB */
5787 if (dcbptr == 0x0) {
5788 NV_INFO(dev, "Assuming a CRT output exists\n");
5789 fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
5791 if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
5792 fabricate_tv_output(dcb, twoHeads);
5797 dcbtable = &bios->data[dcbptr];
5799 /* get DCB version */
5800 dcb->version = dcbtable[0];
5801 NV_TRACE(dev, "Found Display Configuration Block version %d.%d\n",
5802 dcb->version >> 4, dcb->version & 0xf);
5804 if (dcb->version >= 0x20) { /* NV17+ */
5807 if (dcb->version >= 0x30) { /* NV40+ */
5808 headerlen = dcbtable[1];
5809 entries = dcbtable[2];
5810 recordlength = dcbtable[3];
5811 i2ctabptr = ROM16(dcbtable[4]);
5812 sig = ROM32(dcbtable[6]);
5813 dcb->gpio_table_ptr = ROM16(dcbtable[10]);
5814 dcb->connector_table_ptr = ROM16(dcbtable[20]);
5816 i2ctabptr = ROM16(dcbtable[2]);
5817 sig = ROM32(dcbtable[4]);
5821 if (sig != 0x4edcbdcb) {
5822 NV_ERROR(dev, "Bad Display Configuration Block "
5823 "signature (%08X)\n", sig);
5826 } else if (dcb->version >= 0x15) { /* some NV11 and NV20 */
5827 char sig[8] = { 0 };
5829 strncpy(sig, (char *)&dcbtable[-7], 7);
5830 i2ctabptr = ROM16(dcbtable[2]);
5834 if (strcmp(sig, "DEV_REC")) {
5835 NV_ERROR(dev, "Bad Display Configuration Block "
5836 "signature (%s)\n", sig);
5841 * v1.4 (some NV15/16, NV11+) seems the same as v1.5, but always
5842 * has the same single (crt) entry, even when tv-out present, so
5843 * the conclusion is this version cannot really be used.
5844 * v1.2 tables (some NV6/10, and NV15+) normally have the same
5845 * 5 entries, which are not specific to the card and so no use.
5846 * v1.2 does have an I2C table that read_dcb_i2c_table can
5847 * handle, but cards exist (nv11 in #14821) with a bad i2c table
5848 * pointer, so use the indices parsed in parse_bmp_structure.
5849 * v1.1 (NV5+, maybe some NV4) is entirely unhelpful
5851 NV_TRACEWARN(dev, "No useful information in BIOS output table; "
5852 "adding all possible outputs\n");
5853 fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
5856 * Attempt to detect TV before DVI because the test
5857 * for the former is more accurate and it rules the
5860 if (nv04_tv_identify(dev,
5861 bios->legacy.i2c_indices.tv) >= 0)
5862 fabricate_tv_output(dcb, twoHeads);
5864 else if (bios->tmds.output0_script_ptr ||
5865 bios->tmds.output1_script_ptr)
5866 fabricate_dvi_i_output(dcb, twoHeads);
5872 NV_WARN(dev, "No pointer to DCB I2C port table\n");
5874 dcb->i2c_table = &bios->data[i2ctabptr];
5875 if (dcb->version >= 0x30)
5876 dcb->i2c_default_indices = dcb->i2c_table[4];
5879 if (entries > DCB_MAX_NUM_ENTRIES)
5880 entries = DCB_MAX_NUM_ENTRIES;
5882 for (i = 0; i < entries; i++) {
5883 uint32_t connection, config = 0;
5885 connection = ROM32(dcbtable[headerlen + recordlength * i]);
5887 config = ROM32(dcbtable[headerlen + confofs + recordlength * i]);
5889 /* seen on an NV11 with DCB v1.5 */
5890 if (connection == 0x00000000)
5893 /* seen on an NV17 with DCB v2.0 */
5894 if (connection == 0xffffffff)
5897 if ((connection & 0x0000000f) == 0x0000000f)
5900 NV_TRACEWARN(dev, "Raw DCB entry %d: %08x %08x\n",
5901 dcb->entries, connection, config);
5903 if (!parse_dcb_entry(dev, dcb, connection, config))
5908 * apart for v2.1+ not being known for requiring merging, this
5909 * guarantees dcbent->index is the index of the entry in the rom image
5911 if (dcb->version < 0x21)
5912 merge_like_dcb_entries(dev, dcb);
5917 parse_dcb_gpio_table(bios);
5918 parse_dcb_connector_table(bios);
5923 fixup_legacy_connector(struct nvbios *bios)
5925 struct dcb_table *dcb = &bios->dcb;
5926 int i, i2c, i2c_conn[DCB_MAX_NUM_I2C_ENTRIES] = { };
5929 * DCB 3.0 also has the table in most cases, but there are some cards
5930 * where the table is filled with stub entries, and the DCB entriy
5931 * indices are all 0. We don't need the connector indices on pre-G80
5932 * chips (yet?) so limit the use to DCB 4.0 and above.
5934 if (dcb->version >= 0x40)
5937 dcb->connector.entries = 0;
5940 * No known connector info before v3.0, so make it up. the rule here
5941 * is: anything on the same i2c bus is considered to be on the same
5942 * connector. any output without an associated i2c bus is assigned
5943 * its own unique connector index.
5945 for (i = 0; i < dcb->entries; i++) {
5947 * Ignore the I2C index for on-chip TV-out, as there
5948 * are cards with bogus values (nv31m in bug 23212),
5949 * and it's otherwise useless.
5951 if (dcb->entry[i].type == OUTPUT_TV &&
5952 dcb->entry[i].location == DCB_LOC_ON_CHIP)
5953 dcb->entry[i].i2c_index = 0xf;
5954 i2c = dcb->entry[i].i2c_index;
5956 if (i2c_conn[i2c]) {
5957 dcb->entry[i].connector = i2c_conn[i2c] - 1;
5961 dcb->entry[i].connector = dcb->connector.entries++;
5963 i2c_conn[i2c] = dcb->connector.entries;
5966 /* Fake the connector table as well as just connector indices */
5967 for (i = 0; i < dcb->connector.entries; i++) {
5968 dcb->connector.entry[i].index = i;
5969 dcb->connector.entry[i].type = divine_connector_type(bios, i);
5970 dcb->connector.entry[i].gpio_tag = 0xff;
5975 fixup_legacy_i2c(struct nvbios *bios)
5977 struct dcb_table *dcb = &bios->dcb;
5980 for (i = 0; i < dcb->entries; i++) {
5981 if (dcb->entry[i].i2c_index == LEGACY_I2C_CRT)
5982 dcb->entry[i].i2c_index = bios->legacy.i2c_indices.crt;
5983 if (dcb->entry[i].i2c_index == LEGACY_I2C_PANEL)
5984 dcb->entry[i].i2c_index = bios->legacy.i2c_indices.panel;
5985 if (dcb->entry[i].i2c_index == LEGACY_I2C_TV)
5986 dcb->entry[i].i2c_index = bios->legacy.i2c_indices.tv;
5990 static int load_nv17_hwsq_ucode_entry(struct drm_device *dev, struct nvbios *bios, uint16_t hwsq_offset, int entry)
5993 * The header following the "HWSQ" signature has the number of entries,
5994 * and the entry size
5996 * An entry consists of a dword to write to the sequencer control reg
5997 * (0x00001304), followed by the ucode bytes, written sequentially,
5998 * starting at reg 0x00001400
6001 uint8_t bytes_to_write;
6002 uint16_t hwsq_entry_offset;
6005 if (bios->data[hwsq_offset] <= entry) {
6006 NV_ERROR(dev, "Too few entries in HW sequencer table for "
6007 "requested entry\n");
6011 bytes_to_write = bios->data[hwsq_offset + 1];
6013 if (bytes_to_write != 36) {
6014 NV_ERROR(dev, "Unknown HW sequencer entry size\n");
6018 NV_TRACE(dev, "Loading NV17 power sequencing microcode\n");
6020 hwsq_entry_offset = hwsq_offset + 2 + entry * bytes_to_write;
6022 /* set sequencer control */
6023 bios_wr32(bios, 0x00001304, ROM32(bios->data[hwsq_entry_offset]));
6024 bytes_to_write -= 4;
6027 for (i = 0; i < bytes_to_write; i += 4)
6028 bios_wr32(bios, 0x00001400 + i, ROM32(bios->data[hwsq_entry_offset + i + 4]));
6030 /* twiddle NV_PBUS_DEBUG_4 */
6031 bios_wr32(bios, NV_PBUS_DEBUG_4, bios_rd32(bios, NV_PBUS_DEBUG_4) | 0x18);
6036 static int load_nv17_hw_sequencer_ucode(struct drm_device *dev,
6037 struct nvbios *bios)
6040 * BMP based cards, from NV17, need a microcode loading to correctly
6041 * control the GPIO etc for LVDS panels
6043 * BIT based cards seem to do this directly in the init scripts
6045 * The microcode entries are found by the "HWSQ" signature.
6048 const uint8_t hwsq_signature[] = { 'H', 'W', 'S', 'Q' };
6049 const int sz = sizeof(hwsq_signature);
6052 hwsq_offset = findstr(bios->data, bios->length, hwsq_signature, sz);
6056 /* always use entry 0? */
6057 return load_nv17_hwsq_ucode_entry(dev, bios, hwsq_offset + sz, 0);
6060 uint8_t *nouveau_bios_embedded_edid(struct drm_device *dev)
6062 struct drm_nouveau_private *dev_priv = dev->dev_private;
6063 struct nvbios *bios = &dev_priv->vbios;
6064 const uint8_t edid_sig[] = {
6065 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
6066 uint16_t offset = 0;
6068 int searchlen = NV_PROM_SIZE;
6071 return bios->fp.edid;
6074 newoffset = findstr(&bios->data[offset], searchlen,
6078 offset += newoffset;
6079 if (!nv_cksum(&bios->data[offset], EDID1_LEN))
6082 searchlen -= offset;
6086 NV_TRACE(dev, "Found EDID in BIOS\n");
6088 return bios->fp.edid = &bios->data[offset];
6092 nouveau_bios_run_init_table(struct drm_device *dev, uint16_t table,
6093 struct dcb_entry *dcbent)
6095 struct drm_nouveau_private *dev_priv = dev->dev_private;
6096 struct nvbios *bios = &dev_priv->vbios;
6097 struct init_exec iexec = { true, false };
6099 mutex_lock(&bios->lock);
6100 bios->display.output = dcbent;
6101 parse_init_table(bios, table, &iexec);
6102 bios->display.output = NULL;
6103 mutex_unlock(&bios->lock);
6106 static bool NVInitVBIOS(struct drm_device *dev)
6108 struct drm_nouveau_private *dev_priv = dev->dev_private;
6109 struct nvbios *bios = &dev_priv->vbios;
6111 memset(bios, 0, sizeof(struct nvbios));
6112 mutex_init(&bios->lock);
6115 if (!NVShadowVBIOS(dev, bios->data))
6118 bios->length = NV_PROM_SIZE;
6122 static int nouveau_parse_vbios_struct(struct drm_device *dev)
6124 struct drm_nouveau_private *dev_priv = dev->dev_private;
6125 struct nvbios *bios = &dev_priv->vbios;
6126 const uint8_t bit_signature[] = { 0xff, 0xb8, 'B', 'I', 'T' };
6127 const uint8_t bmp_signature[] = { 0xff, 0x7f, 'N', 'V', 0x0 };
6130 offset = findstr(bios->data, bios->length,
6131 bit_signature, sizeof(bit_signature));
6133 NV_TRACE(dev, "BIT BIOS found\n");
6134 return parse_bit_structure(bios, offset + 6);
6137 offset = findstr(bios->data, bios->length,
6138 bmp_signature, sizeof(bmp_signature));
6140 NV_TRACE(dev, "BMP BIOS found\n");
6141 return parse_bmp_structure(dev, bios, offset);
6144 NV_ERROR(dev, "No known BIOS signature found\n");
6149 nouveau_run_vbios_init(struct drm_device *dev)
6151 struct drm_nouveau_private *dev_priv = dev->dev_private;
6152 struct nvbios *bios = &dev_priv->vbios;
6155 NVLockVgaCrtcs(dev, false);
6156 if (nv_two_heads(dev))
6157 NVSetOwner(dev, bios->state.crtchead);
6159 if (bios->major_version < 5) /* BMP only */
6160 load_nv17_hw_sequencer_ucode(dev, bios);
6162 if (bios->execute) {
6163 bios->fp.last_script_invoc = 0;
6164 bios->fp.lvds_init_run = false;
6167 parse_init_tables(bios);
6170 * Runs some additional script seen on G8x VBIOSen. The VBIOS'
6171 * parser will run this right after the init tables, the binary
6172 * driver appears to run it at some point later.
6174 if (bios->some_script_ptr) {
6175 struct init_exec iexec = {true, false};
6177 NV_INFO(dev, "Parsing VBIOS init table at offset 0x%04X\n",
6178 bios->some_script_ptr);
6179 parse_init_table(bios, bios->some_script_ptr, &iexec);
6182 if (dev_priv->card_type >= NV_50) {
6183 for (i = 0; i < bios->dcb.entries; i++) {
6184 nouveau_bios_run_display_table(dev,
6185 &bios->dcb.entry[i],
6190 NVLockVgaCrtcs(dev, true);
6196 nouveau_bios_i2c_devices_takedown(struct drm_device *dev)
6198 struct drm_nouveau_private *dev_priv = dev->dev_private;
6199 struct nvbios *bios = &dev_priv->vbios;
6200 struct dcb_i2c_entry *entry;
6203 entry = &bios->dcb.i2c[0];
6204 for (i = 0; i < DCB_MAX_NUM_I2C_ENTRIES; i++, entry++)
6205 nouveau_i2c_fini(dev, entry);
6209 nouveau_bios_init(struct drm_device *dev)
6211 struct drm_nouveau_private *dev_priv = dev->dev_private;
6212 struct nvbios *bios = &dev_priv->vbios;
6213 uint32_t saved_nv_pextdev_boot_0;
6217 if (!NVInitVBIOS(dev))
6220 ret = nouveau_parse_vbios_struct(dev);
6224 ret = parse_dcb_table(dev, bios, nv_two_heads(dev));
6228 fixup_legacy_i2c(bios);
6229 fixup_legacy_connector(bios);
6231 if (!bios->major_version) /* we don't run version 0 bios */
6234 /* these will need remembering across a suspend */
6235 saved_nv_pextdev_boot_0 = bios_rd32(bios, NV_PEXTDEV_BOOT_0);
6236 bios->state.saved_nv_pfb_cfg0 = bios_rd32(bios, NV_PFB_CFG0);
6238 /* init script execution disabled */
6239 bios->execute = false;
6241 /* ... unless card isn't POSTed already */
6242 if (dev_priv->card_type >= NV_10 &&
6243 NVReadVgaCrtc(dev, 0, 0x00) == 0 &&
6244 NVReadVgaCrtc(dev, 0, 0x1a) == 0) {
6245 NV_INFO(dev, "Adaptor not initialised\n");
6246 if (dev_priv->card_type < NV_50) {
6247 NV_ERROR(dev, "Unable to POST this chipset\n");
6251 NV_INFO(dev, "Running VBIOS init tables\n");
6252 bios->execute = true;
6255 bios_wr32(bios, NV_PEXTDEV_BOOT_0, saved_nv_pextdev_boot_0);
6257 ret = nouveau_run_vbios_init(dev);
6261 /* feature_byte on BMP is poor, but init always sets CR4B */
6262 was_locked = NVLockVgaCrtcs(dev, false);
6263 if (bios->major_version < 5)
6264 bios->is_mobile = NVReadVgaCrtc(dev, 0, NV_CIO_CRE_4B) & 0x40;
6266 /* all BIT systems need p_f_m_t for digital_min_front_porch */
6267 if (bios->is_mobile || bios->major_version >= 5)
6268 ret = parse_fp_mode_table(dev, bios);
6269 NVLockVgaCrtcs(dev, was_locked);
6271 /* allow subsequent scripts to execute */
6272 bios->execute = true;
6278 nouveau_bios_takedown(struct drm_device *dev)
6280 nouveau_bios_i2c_devices_takedown(dev);