2 * gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware
4 * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
5 * Kyosti Malkki <kmalkki@cc.hut.fi>
6 * Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and
7 * Jean Delvare <khali@linux-fr.org>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 * Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare
24 * and advice of Greg Kroah-Hartman.
26 * Notes about the port:
27 * Release 0x00 of the GL518SM chipset doesn't support reading of in0,
28 * in1 nor in2. The original driver had an ugly workaround to get them
29 * anyway (changing limits and watching alarms trigger and wear off).
30 * We did not keep that part of the original driver in the Linux 2.6
31 * version, since it was making the driver significantly more complex
32 * with no real benefit.
35 #include <linux/module.h>
36 #include <linux/init.h>
37 #include <linux/slab.h>
38 #include <linux/jiffies.h>
39 #include <linux/i2c.h>
40 #include <linux/hwmon.h>
41 #include <linux/hwmon-sysfs.h>
42 #include <linux/err.h>
43 #include <linux/mutex.h>
44 #include <linux/sysfs.h>
46 /* Addresses to scan */
47 static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
49 /* Insmod parameters */
50 I2C_CLIENT_INSMOD_2(gl518sm_r00, gl518sm_r80);
52 /* Many GL518 constants specified below */
54 /* The GL518 registers */
55 #define GL518_REG_CHIP_ID 0x00
56 #define GL518_REG_REVISION 0x01
57 #define GL518_REG_VENDOR_ID 0x02
58 #define GL518_REG_CONF 0x03
59 #define GL518_REG_TEMP_IN 0x04
60 #define GL518_REG_TEMP_MAX 0x05
61 #define GL518_REG_TEMP_HYST 0x06
62 #define GL518_REG_FAN_COUNT 0x07
63 #define GL518_REG_FAN_LIMIT 0x08
64 #define GL518_REG_VIN1_LIMIT 0x09
65 #define GL518_REG_VIN2_LIMIT 0x0a
66 #define GL518_REG_VIN3_LIMIT 0x0b
67 #define GL518_REG_VDD_LIMIT 0x0c
68 #define GL518_REG_VIN3 0x0d
69 #define GL518_REG_MISC 0x0f
70 #define GL518_REG_ALARM 0x10
71 #define GL518_REG_MASK 0x11
72 #define GL518_REG_INT 0x12
73 #define GL518_REG_VIN2 0x13
74 #define GL518_REG_VIN1 0x14
75 #define GL518_REG_VDD 0x15
79 * Conversions. Rounding and limit checking is only done on the TO_REG
80 * variants. Note that you should be a bit careful with which arguments
81 * these macros are called: arguments may be evaluated more than once.
82 * Fixing this is just not worth it.
85 #define RAW_FROM_REG(val) val
87 #define BOOL_FROM_REG(val) ((val)?0:1)
88 #define BOOL_TO_REG(val) ((val)?0:1)
90 #define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0? \
91 (val)-500:(val)+500)/1000)+119),0,255))
92 #define TEMP_FROM_REG(val) (((val) - 119) * 1000)
94 static inline u8 FAN_TO_REG(long rpm, int div)
99 rpmdiv = SENSORS_LIMIT(rpm, 1, 1920000) * div;
100 return SENSORS_LIMIT((960000 + rpmdiv / 2) / rpmdiv, 1, 255);
102 #define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (960000/((val)*(div))))
104 #define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255))
105 #define IN_FROM_REG(val) ((val)*19)
107 #define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255))
108 #define VDD_FROM_REG(val) (((val)*95+2)/4)
110 #define DIV_TO_REG(val) ((val)==4?2:(val)==2?1:(val)==1?0:3)
111 #define DIV_FROM_REG(val) (1 << (val))
113 #define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask)
114 #define BEEP_MASK_FROM_REG(val) ((val) & 0x7f)
116 /* Each client has this additional data */
118 struct i2c_client client;
119 struct device *hwmon_dev;
122 struct mutex update_lock;
123 char valid; /* !=0 if following fields are valid */
124 unsigned long last_updated; /* In jiffies */
126 u8 voltage_in[4]; /* Register values; [0] = VDD */
127 u8 voltage_min[4]; /* Register values; [0] = VDD */
128 u8 voltage_max[4]; /* Register values; [0] = VDD */
131 u8 fan_div[2]; /* Register encoding, shifted right */
132 u8 fan_auto1; /* Boolean */
133 u8 temp_in; /* Register values */
134 u8 temp_max; /* Register values */
135 u8 temp_hyst; /* Register values */
136 u8 alarms; /* Register value */
138 u8 beep_mask; /* Register value */
139 u8 beep_enable; /* Boolean */
142 static int gl518_attach_adapter(struct i2c_adapter *adapter);
143 static int gl518_detect(struct i2c_adapter *adapter, int address, int kind);
144 static void gl518_init_client(struct i2c_client *client);
145 static int gl518_detach_client(struct i2c_client *client);
146 static int gl518_read_value(struct i2c_client *client, u8 reg);
147 static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
148 static struct gl518_data *gl518_update_device(struct device *dev);
150 /* This is the driver that will be inserted */
151 static struct i2c_driver gl518_driver = {
155 .attach_adapter = gl518_attach_adapter,
156 .detach_client = gl518_detach_client,
163 #define show(type, suffix, value) \
164 static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
166 struct gl518_data *data = gl518_update_device(dev); \
167 return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \
170 show(TEMP, temp_input1, temp_in);
171 show(TEMP, temp_max1, temp_max);
172 show(TEMP, temp_hyst1, temp_hyst);
173 show(BOOL, fan_auto1, fan_auto1);
174 show(VDD, in_input0, voltage_in[0]);
175 show(IN, in_input1, voltage_in[1]);
176 show(IN, in_input2, voltage_in[2]);
177 show(IN, in_input3, voltage_in[3]);
178 show(VDD, in_min0, voltage_min[0]);
179 show(IN, in_min1, voltage_min[1]);
180 show(IN, in_min2, voltage_min[2]);
181 show(IN, in_min3, voltage_min[3]);
182 show(VDD, in_max0, voltage_max[0]);
183 show(IN, in_max1, voltage_max[1]);
184 show(IN, in_max2, voltage_max[2]);
185 show(IN, in_max3, voltage_max[3]);
186 show(RAW, alarms, alarms);
187 show(BOOL, beep_enable, beep_enable);
188 show(BEEP_MASK, beep_mask, beep_mask);
190 static ssize_t show_fan_input(struct device *dev,
191 struct device_attribute *attr, char *buf)
193 int nr = to_sensor_dev_attr(attr)->index;
194 struct gl518_data *data = gl518_update_device(dev);
195 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_in[nr],
196 DIV_FROM_REG(data->fan_div[nr])));
199 static ssize_t show_fan_min(struct device *dev,
200 struct device_attribute *attr, char *buf)
202 int nr = to_sensor_dev_attr(attr)->index;
203 struct gl518_data *data = gl518_update_device(dev);
204 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
205 DIV_FROM_REG(data->fan_div[nr])));
208 static ssize_t show_fan_div(struct device *dev,
209 struct device_attribute *attr, char *buf)
211 int nr = to_sensor_dev_attr(attr)->index;
212 struct gl518_data *data = gl518_update_device(dev);
213 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
216 #define set(type, suffix, value, reg) \
217 static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
220 struct i2c_client *client = to_i2c_client(dev); \
221 struct gl518_data *data = i2c_get_clientdata(client); \
222 long val = simple_strtol(buf, NULL, 10); \
224 mutex_lock(&data->update_lock); \
225 data->value = type##_TO_REG(val); \
226 gl518_write_value(client, reg, data->value); \
227 mutex_unlock(&data->update_lock); \
231 #define set_bits(type, suffix, value, reg, mask, shift) \
232 static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
235 struct i2c_client *client = to_i2c_client(dev); \
236 struct gl518_data *data = i2c_get_clientdata(client); \
238 unsigned long val = simple_strtoul(buf, NULL, 10); \
240 mutex_lock(&data->update_lock); \
241 regvalue = gl518_read_value(client, reg); \
242 data->value = type##_TO_REG(val); \
243 regvalue = (regvalue & ~mask) | (data->value << shift); \
244 gl518_write_value(client, reg, regvalue); \
245 mutex_unlock(&data->update_lock); \
249 #define set_low(type, suffix, value, reg) \
250 set_bits(type, suffix, value, reg, 0x00ff, 0)
251 #define set_high(type, suffix, value, reg) \
252 set_bits(type, suffix, value, reg, 0xff00, 8)
254 set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
255 set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
256 set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
257 set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
258 set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
259 set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
260 set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
261 set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
262 set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
263 set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
264 set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
265 set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
266 set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
268 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
269 const char *buf, size_t count)
271 struct i2c_client *client = to_i2c_client(dev);
272 struct gl518_data *data = i2c_get_clientdata(client);
273 int nr = to_sensor_dev_attr(attr)->index;
275 unsigned long val = simple_strtoul(buf, NULL, 10);
277 mutex_lock(&data->update_lock);
278 regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
279 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
280 regvalue = (regvalue & (0xff << (8 * nr)))
281 | (data->fan_min[nr] << (8 * (1 - nr)));
282 gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
284 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
285 if (data->fan_min[nr] == 0)
286 data->alarm_mask &= ~(0x20 << nr);
288 data->alarm_mask |= (0x20 << nr);
289 data->beep_mask &= data->alarm_mask;
290 gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
292 mutex_unlock(&data->update_lock);
296 static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
297 const char *buf, size_t count)
299 struct i2c_client *client = to_i2c_client(dev);
300 struct gl518_data *data = i2c_get_clientdata(client);
301 int nr = to_sensor_dev_attr(attr)->index;
303 unsigned long val = simple_strtoul(buf, NULL, 10);
305 mutex_lock(&data->update_lock);
306 regvalue = gl518_read_value(client, GL518_REG_MISC);
307 data->fan_div[nr] = DIV_TO_REG(val);
308 regvalue = (regvalue & ~(0xc0 >> (2 * nr)))
309 | (data->fan_div[nr] << (6 - 2 * nr));
310 gl518_write_value(client, GL518_REG_MISC, regvalue);
311 mutex_unlock(&data->update_lock);
315 static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
316 static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
317 static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
318 show_temp_hyst1, set_temp_hyst1);
319 static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
320 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
321 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
322 static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO,
323 show_fan_min, set_fan_min, 0);
324 static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO,
325 show_fan_min, set_fan_min, 1);
326 static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO,
327 show_fan_div, set_fan_div, 0);
328 static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO,
329 show_fan_div, set_fan_div, 1);
330 static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
331 static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
332 static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
333 static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
334 static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0);
335 static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1);
336 static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2);
337 static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3);
338 static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0);
339 static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1);
340 static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2);
341 static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3);
342 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
343 static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO,
344 show_beep_enable, set_beep_enable);
345 static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO,
346 show_beep_mask, set_beep_mask);
348 static struct attribute *gl518_attributes[] = {
349 &dev_attr_in3_input.attr,
350 &dev_attr_in0_min.attr,
351 &dev_attr_in1_min.attr,
352 &dev_attr_in2_min.attr,
353 &dev_attr_in3_min.attr,
354 &dev_attr_in0_max.attr,
355 &dev_attr_in1_max.attr,
356 &dev_attr_in2_max.attr,
357 &dev_attr_in3_max.attr,
359 &dev_attr_fan1_auto.attr,
360 &sensor_dev_attr_fan1_input.dev_attr.attr,
361 &sensor_dev_attr_fan2_input.dev_attr.attr,
362 &sensor_dev_attr_fan1_min.dev_attr.attr,
363 &sensor_dev_attr_fan2_min.dev_attr.attr,
364 &sensor_dev_attr_fan1_div.dev_attr.attr,
365 &sensor_dev_attr_fan2_div.dev_attr.attr,
367 &dev_attr_temp1_input.attr,
368 &dev_attr_temp1_max.attr,
369 &dev_attr_temp1_max_hyst.attr,
371 &dev_attr_alarms.attr,
372 &dev_attr_beep_enable.attr,
373 &dev_attr_beep_mask.attr,
377 static const struct attribute_group gl518_group = {
378 .attrs = gl518_attributes,
381 static struct attribute *gl518_attributes_r80[] = {
382 &dev_attr_in0_input.attr,
383 &dev_attr_in1_input.attr,
384 &dev_attr_in2_input.attr,
388 static const struct attribute_group gl518_group_r80 = {
389 .attrs = gl518_attributes_r80,
396 static int gl518_attach_adapter(struct i2c_adapter *adapter)
398 if (!(adapter->class & I2C_CLASS_HWMON))
400 return i2c_probe(adapter, &addr_data, gl518_detect);
403 static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
406 struct i2c_client *client;
407 struct gl518_data *data;
410 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
411 I2C_FUNC_SMBUS_WORD_DATA))
414 /* OK. For now, we presume we have a valid client. We now create the
415 client structure, even though we cannot fill it completely yet.
416 But it allows us to access gl518_{read,write}_value. */
418 if (!(data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
423 client = &data->client;
424 i2c_set_clientdata(client, data);
426 client->addr = address;
427 client->adapter = adapter;
428 client->driver = &gl518_driver;
430 /* Now, we do the remaining detection. */
433 if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
434 || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
438 /* Determine the chip type. */
440 i = gl518_read_value(client, GL518_REG_REVISION);
443 } else if (i == 0x80) {
447 dev_info(&adapter->dev,
448 "Ignoring 'force' parameter for unknown "
449 "chip at adapter %d, address 0x%02x\n",
450 i2c_adapter_id(adapter), address);
455 /* Fill in the remaining client fields */
456 strlcpy(client->name, "gl518sm", I2C_NAME_SIZE);
458 mutex_init(&data->update_lock);
460 /* Tell the I2C layer a new client has arrived */
461 if ((err = i2c_attach_client(client)))
464 /* Initialize the GL518SM chip */
465 data->alarm_mask = 0xff;
466 gl518_init_client(client);
468 /* Register sysfs hooks */
469 if ((err = sysfs_create_group(&client->dev.kobj, &gl518_group)))
471 if (data->type == gl518sm_r80)
472 if ((err = sysfs_create_group(&client->dev.kobj,
474 goto exit_remove_files;
476 data->hwmon_dev = hwmon_device_register(&client->dev);
477 if (IS_ERR(data->hwmon_dev)) {
478 err = PTR_ERR(data->hwmon_dev);
479 goto exit_remove_files;
485 sysfs_remove_group(&client->dev.kobj, &gl518_group);
486 if (data->type == gl518sm_r80)
487 sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
489 i2c_detach_client(client);
497 /* Called when we have found a new GL518SM.
498 Note that we preserve D4:NoFan2 and D2:beep_enable. */
499 static void gl518_init_client(struct i2c_client *client)
501 /* Make sure we leave D7:Reset untouched */
502 u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
504 /* Comparator mode (D3=0), standby mode (D6=0) */
505 gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
507 /* Never interrupts */
508 gl518_write_value(client, GL518_REG_MASK, 0x00);
510 /* Clear status register (D5=1), start (D6=1) */
511 gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
512 gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
515 static int gl518_detach_client(struct i2c_client *client)
517 struct gl518_data *data = i2c_get_clientdata(client);
520 hwmon_device_unregister(data->hwmon_dev);
521 sysfs_remove_group(&client->dev.kobj, &gl518_group);
522 if (data->type == gl518sm_r80)
523 sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
525 if ((err = i2c_detach_client(client)))
532 /* Registers 0x07 to 0x0c are word-sized, others are byte-sized
533 GL518 uses a high-byte first convention, which is exactly opposite to
534 the SMBus standard. */
535 static int gl518_read_value(struct i2c_client *client, u8 reg)
537 if ((reg >= 0x07) && (reg <= 0x0c))
538 return swab16(i2c_smbus_read_word_data(client, reg));
540 return i2c_smbus_read_byte_data(client, reg);
543 static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
545 if ((reg >= 0x07) && (reg <= 0x0c))
546 return i2c_smbus_write_word_data(client, reg, swab16(value));
548 return i2c_smbus_write_byte_data(client, reg, value);
551 static struct gl518_data *gl518_update_device(struct device *dev)
553 struct i2c_client *client = to_i2c_client(dev);
554 struct gl518_data *data = i2c_get_clientdata(client);
557 mutex_lock(&data->update_lock);
559 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
561 dev_dbg(&client->dev, "Starting gl518 update\n");
563 data->alarms = gl518_read_value(client, GL518_REG_INT);
564 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
566 val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
567 data->voltage_min[0] = val & 0xff;
568 data->voltage_max[0] = (val >> 8) & 0xff;
569 val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
570 data->voltage_min[1] = val & 0xff;
571 data->voltage_max[1] = (val >> 8) & 0xff;
572 val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
573 data->voltage_min[2] = val & 0xff;
574 data->voltage_max[2] = (val >> 8) & 0xff;
575 val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
576 data->voltage_min[3] = val & 0xff;
577 data->voltage_max[3] = (val >> 8) & 0xff;
579 val = gl518_read_value(client, GL518_REG_FAN_COUNT);
580 data->fan_in[0] = (val >> 8) & 0xff;
581 data->fan_in[1] = val & 0xff;
583 val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
584 data->fan_min[0] = (val >> 8) & 0xff;
585 data->fan_min[1] = val & 0xff;
587 data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
589 gl518_read_value(client, GL518_REG_TEMP_MAX);
591 gl518_read_value(client, GL518_REG_TEMP_HYST);
593 val = gl518_read_value(client, GL518_REG_MISC);
594 data->fan_div[0] = (val >> 6) & 0x03;
595 data->fan_div[1] = (val >> 4) & 0x03;
596 data->fan_auto1 = (val >> 3) & 0x01;
598 data->alarms &= data->alarm_mask;
600 val = gl518_read_value(client, GL518_REG_CONF);
601 data->beep_enable = (val >> 2) & 1;
603 if (data->type != gl518sm_r00) {
604 data->voltage_in[0] =
605 gl518_read_value(client, GL518_REG_VDD);
606 data->voltage_in[1] =
607 gl518_read_value(client, GL518_REG_VIN1);
608 data->voltage_in[2] =
609 gl518_read_value(client, GL518_REG_VIN2);
611 data->voltage_in[3] =
612 gl518_read_value(client, GL518_REG_VIN3);
614 data->last_updated = jiffies;
618 mutex_unlock(&data->update_lock);
623 static int __init sensors_gl518sm_init(void)
625 return i2c_add_driver(&gl518_driver);
628 static void __exit sensors_gl518sm_exit(void)
630 i2c_del_driver(&gl518_driver);
633 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
634 "Kyosti Malkki <kmalkki@cc.hut.fi> and "
635 "Hong-Gunn Chew <hglinux@gunnet.org>");
636 MODULE_DESCRIPTION("GL518SM driver");
637 MODULE_LICENSE("GPL");
639 module_init(sensors_gl518sm_init);
640 module_exit(sensors_gl518sm_exit);