2 * sis5595.c - Part of lm_sensors, Linux kernel modules
3 * for hardware monitoring
5 * Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
6 * Kyösti Mälkki <kmalkki@cc.hut.fi>, and
7 * Mark D. Studebaker <mdsxyz123@yahoo.com>
8 * Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
9 * the help of Jean Delvare <khali@linux-fr.org>
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
27 * SiS southbridge has a LM78-like chip integrated on the same IC.
28 * This driver is a customized copy of lm78.c
30 * Supports following revisions:
31 * Version PCI ID PCI Revision
32 * 1 1039/0008 AF or less
33 * 2 1039/0008 B0 or greater
35 * Note: these chips contain a 0008 device which is incompatible with the
36 * 5595. We recognize these by the presence of the listed
37 * "blacklist" PCI ID and refuse to load.
39 * NOT SUPPORTED PCI ID BLACKLIST PCI ID
53 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
55 #include <linux/module.h>
56 #include <linux/slab.h>
57 #include <linux/ioport.h>
58 #include <linux/pci.h>
59 #include <linux/platform_device.h>
60 #include <linux/hwmon.h>
61 #include <linux/hwmon-sysfs.h>
62 #include <linux/err.h>
63 #include <linux/init.h>
64 #include <linux/jiffies.h>
65 #include <linux/mutex.h>
66 #include <linux/sysfs.h>
67 #include <linux/acpi.h>
72 * If force_addr is set to anything different from 0, we forcibly enable
73 * the device at the given address.
75 static u16 force_addr;
76 module_param(force_addr, ushort, 0);
77 MODULE_PARM_DESC(force_addr,
78 "Initialize the base address of the sensors");
80 static struct platform_device *pdev;
82 /* Many SIS5595 constants specified below */
84 /* Length of ISA address segment */
85 #define SIS5595_EXTENT 8
86 /* PCI Config Registers */
87 #define SIS5595_BASE_REG 0x68
88 #define SIS5595_PIN_REG 0x7A
89 #define SIS5595_ENABLE_REG 0x7B
91 /* Where are the ISA address/data registers relative to the base address */
92 #define SIS5595_ADDR_REG_OFFSET 5
93 #define SIS5595_DATA_REG_OFFSET 6
95 /* The SIS5595 registers */
96 #define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2)
97 #define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2)
98 #define SIS5595_REG_IN(nr) (0x20 + (nr))
100 #define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr))
101 #define SIS5595_REG_FAN(nr) (0x28 + (nr))
104 * On the first version of the chip, the temp registers are separate.
105 * On the second version,
106 * TEMP pin is shared with IN4, configured in PCI register 0x7A.
107 * The registers are the same as well.
108 * OVER and HYST are really MAX and MIN.
112 #define SIS5595_REG_TEMP (((data->revision) >= REV2MIN) ? \
113 SIS5595_REG_IN(4) : 0x27)
114 #define SIS5595_REG_TEMP_OVER (((data->revision) >= REV2MIN) ? \
115 SIS5595_REG_IN_MAX(4) : 0x39)
116 #define SIS5595_REG_TEMP_HYST (((data->revision) >= REV2MIN) ? \
117 SIS5595_REG_IN_MIN(4) : 0x3a)
119 #define SIS5595_REG_CONFIG 0x40
120 #define SIS5595_REG_ALARM1 0x41
121 #define SIS5595_REG_ALARM2 0x42
122 #define SIS5595_REG_FANDIV 0x47
125 * Conversions. Limit checking is only done on the TO_REG
130 * IN: mV, (0V to 4.08V)
133 static inline u8 IN_TO_REG(unsigned long val)
135 unsigned long nval = SENSORS_LIMIT(val, 0, 4080);
136 return (nval + 8) / 16;
138 #define IN_FROM_REG(val) ((val) * 16)
140 static inline u8 FAN_TO_REG(long rpm, int div)
144 return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
147 static inline int FAN_FROM_REG(u8 val, int div)
149 return val == 0 ? -1 : val == 255 ? 0 : 1350000 / (val * div);
153 * TEMP: mC (-54.12C to +157.53C)
154 * REG: 0.83C/bit + 52.12, two's complement
156 static inline int TEMP_FROM_REG(s8 val)
158 return val * 830 + 52120;
160 static inline s8 TEMP_TO_REG(int val)
162 int nval = SENSORS_LIMIT(val, -54120, 157530) ;
163 return nval < 0 ? (nval - 5212 - 415) / 830 : (nval - 5212 + 415) / 830;
167 * FAN DIV: 1, 2, 4, or 8 (defaults to 2)
168 * REG: 0, 1, 2, or 3 (respectively) (defaults to 1)
170 static inline u8 DIV_TO_REG(int val)
172 return val == 8 ? 3 : val == 4 ? 2 : val == 1 ? 0 : 1;
174 #define DIV_FROM_REG(val) (1 << (val))
177 * For each registered chip, we need to keep some data in memory.
178 * The structure is dynamically allocated.
180 struct sis5595_data {
183 struct device *hwmon_dev;
186 struct mutex update_lock;
187 char valid; /* !=0 if following fields are valid */
188 unsigned long last_updated; /* In jiffies */
189 char maxins; /* == 3 if temp enabled, otherwise == 4 */
190 u8 revision; /* Reg. value */
192 u8 in[5]; /* Register value */
193 u8 in_max[5]; /* Register value */
194 u8 in_min[5]; /* Register value */
195 u8 fan[2]; /* Register value */
196 u8 fan_min[2]; /* Register value */
197 s8 temp; /* Register value */
198 s8 temp_over; /* Register value */
199 s8 temp_hyst; /* Register value */
200 u8 fan_div[2]; /* Register encoding, shifted right */
201 u16 alarms; /* Register encoding, combined */
204 static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */
206 static int sis5595_probe(struct platform_device *pdev);
207 static int __devexit sis5595_remove(struct platform_device *pdev);
209 static int sis5595_read_value(struct sis5595_data *data, u8 reg);
210 static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value);
211 static struct sis5595_data *sis5595_update_device(struct device *dev);
212 static void sis5595_init_device(struct sis5595_data *data);
214 static struct platform_driver sis5595_driver = {
216 .owner = THIS_MODULE,
219 .probe = sis5595_probe,
220 .remove = __devexit_p(sis5595_remove),
224 static ssize_t show_in(struct device *dev, struct device_attribute *da,
227 struct sis5595_data *data = sis5595_update_device(dev);
228 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
229 int nr = attr->index;
230 return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
233 static ssize_t show_in_min(struct device *dev, struct device_attribute *da,
236 struct sis5595_data *data = sis5595_update_device(dev);
237 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
238 int nr = attr->index;
239 return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
242 static ssize_t show_in_max(struct device *dev, struct device_attribute *da,
245 struct sis5595_data *data = sis5595_update_device(dev);
246 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
247 int nr = attr->index;
248 return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
251 static ssize_t set_in_min(struct device *dev, struct device_attribute *da,
252 const char *buf, size_t count)
254 struct sis5595_data *data = dev_get_drvdata(dev);
255 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
256 int nr = attr->index;
260 err = kstrtoul(buf, 10, &val);
264 mutex_lock(&data->update_lock);
265 data->in_min[nr] = IN_TO_REG(val);
266 sis5595_write_value(data, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
267 mutex_unlock(&data->update_lock);
271 static ssize_t set_in_max(struct device *dev, struct device_attribute *da,
272 const char *buf, size_t count)
274 struct sis5595_data *data = dev_get_drvdata(dev);
275 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
276 int nr = attr->index;
280 err = kstrtoul(buf, 10, &val);
284 mutex_lock(&data->update_lock);
285 data->in_max[nr] = IN_TO_REG(val);
286 sis5595_write_value(data, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
287 mutex_unlock(&data->update_lock);
291 #define show_in_offset(offset) \
292 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
293 show_in, NULL, offset); \
294 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
295 show_in_min, set_in_min, offset); \
296 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
297 show_in_max, set_in_max, offset);
306 static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
309 struct sis5595_data *data = sis5595_update_device(dev);
310 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
313 static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr,
316 struct sis5595_data *data = sis5595_update_device(dev);
317 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
320 static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr,
321 const char *buf, size_t count)
323 struct sis5595_data *data = dev_get_drvdata(dev);
327 err = kstrtol(buf, 10, &val);
331 mutex_lock(&data->update_lock);
332 data->temp_over = TEMP_TO_REG(val);
333 sis5595_write_value(data, SIS5595_REG_TEMP_OVER, data->temp_over);
334 mutex_unlock(&data->update_lock);
338 static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr,
341 struct sis5595_data *data = sis5595_update_device(dev);
342 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
345 static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr,
346 const char *buf, size_t count)
348 struct sis5595_data *data = dev_get_drvdata(dev);
352 err = kstrtol(buf, 10, &val);
356 mutex_lock(&data->update_lock);
357 data->temp_hyst = TEMP_TO_REG(val);
358 sis5595_write_value(data, SIS5595_REG_TEMP_HYST, data->temp_hyst);
359 mutex_unlock(&data->update_lock);
363 static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
364 static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
365 show_temp_over, set_temp_over);
366 static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
367 show_temp_hyst, set_temp_hyst);
370 static ssize_t show_fan(struct device *dev, struct device_attribute *da,
373 struct sis5595_data *data = sis5595_update_device(dev);
374 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
375 int nr = attr->index;
376 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
377 DIV_FROM_REG(data->fan_div[nr])));
380 static ssize_t show_fan_min(struct device *dev, struct device_attribute *da,
383 struct sis5595_data *data = sis5595_update_device(dev);
384 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
385 int nr = attr->index;
386 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
387 DIV_FROM_REG(data->fan_div[nr])));
390 static ssize_t set_fan_min(struct device *dev, struct device_attribute *da,
391 const char *buf, size_t count)
393 struct sis5595_data *data = dev_get_drvdata(dev);
394 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
395 int nr = attr->index;
399 err = kstrtoul(buf, 10, &val);
403 mutex_lock(&data->update_lock);
404 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
405 sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
406 mutex_unlock(&data->update_lock);
410 static ssize_t show_fan_div(struct device *dev, struct device_attribute *da,
413 struct sis5595_data *data = sis5595_update_device(dev);
414 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
415 int nr = attr->index;
416 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
420 * Note: we save and restore the fan minimum here, because its value is
421 * determined in part by the fan divisor. This follows the principle of
422 * least surprise; the user doesn't expect the fan minimum to change just
423 * because the divisor changed.
425 static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
426 const char *buf, size_t count)
428 struct sis5595_data *data = dev_get_drvdata(dev);
429 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
430 int nr = attr->index;
436 err = kstrtoul(buf, 10, &val);
440 mutex_lock(&data->update_lock);
441 min = FAN_FROM_REG(data->fan_min[nr],
442 DIV_FROM_REG(data->fan_div[nr]));
443 reg = sis5595_read_value(data, SIS5595_REG_FANDIV);
447 data->fan_div[nr] = 0;
450 data->fan_div[nr] = 1;
453 data->fan_div[nr] = 2;
456 data->fan_div[nr] = 3;
459 dev_err(dev, "fan_div value %ld not "
460 "supported. Choose one of 1, 2, 4 or 8!\n", val);
461 mutex_unlock(&data->update_lock);
467 reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
470 reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
473 sis5595_write_value(data, SIS5595_REG_FANDIV, reg);
475 FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
476 sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
477 mutex_unlock(&data->update_lock);
481 #define show_fan_offset(offset) \
482 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
483 show_fan, NULL, offset - 1); \
484 static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
485 show_fan_min, set_fan_min, offset - 1); \
486 static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
487 show_fan_div, set_fan_div, offset - 1);
493 static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
496 struct sis5595_data *data = sis5595_update_device(dev);
497 return sprintf(buf, "%d\n", data->alarms);
499 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
501 static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
504 struct sis5595_data *data = sis5595_update_device(dev);
505 int nr = to_sensor_dev_attr(da)->index;
506 return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
508 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
509 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
510 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
511 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
512 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 15);
513 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
514 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
515 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 15);
517 static ssize_t show_name(struct device *dev, struct device_attribute *attr,
520 struct sis5595_data *data = dev_get_drvdata(dev);
521 return sprintf(buf, "%s\n", data->name);
523 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
525 static struct attribute *sis5595_attributes[] = {
526 &sensor_dev_attr_in0_input.dev_attr.attr,
527 &sensor_dev_attr_in0_min.dev_attr.attr,
528 &sensor_dev_attr_in0_max.dev_attr.attr,
529 &sensor_dev_attr_in0_alarm.dev_attr.attr,
530 &sensor_dev_attr_in1_input.dev_attr.attr,
531 &sensor_dev_attr_in1_min.dev_attr.attr,
532 &sensor_dev_attr_in1_max.dev_attr.attr,
533 &sensor_dev_attr_in1_alarm.dev_attr.attr,
534 &sensor_dev_attr_in2_input.dev_attr.attr,
535 &sensor_dev_attr_in2_min.dev_attr.attr,
536 &sensor_dev_attr_in2_max.dev_attr.attr,
537 &sensor_dev_attr_in2_alarm.dev_attr.attr,
538 &sensor_dev_attr_in3_input.dev_attr.attr,
539 &sensor_dev_attr_in3_min.dev_attr.attr,
540 &sensor_dev_attr_in3_max.dev_attr.attr,
541 &sensor_dev_attr_in3_alarm.dev_attr.attr,
543 &sensor_dev_attr_fan1_input.dev_attr.attr,
544 &sensor_dev_attr_fan1_min.dev_attr.attr,
545 &sensor_dev_attr_fan1_div.dev_attr.attr,
546 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
547 &sensor_dev_attr_fan2_input.dev_attr.attr,
548 &sensor_dev_attr_fan2_min.dev_attr.attr,
549 &sensor_dev_attr_fan2_div.dev_attr.attr,
550 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
552 &dev_attr_alarms.attr,
557 static const struct attribute_group sis5595_group = {
558 .attrs = sis5595_attributes,
561 static struct attribute *sis5595_attributes_in4[] = {
562 &sensor_dev_attr_in4_input.dev_attr.attr,
563 &sensor_dev_attr_in4_min.dev_attr.attr,
564 &sensor_dev_attr_in4_max.dev_attr.attr,
565 &sensor_dev_attr_in4_alarm.dev_attr.attr,
569 static const struct attribute_group sis5595_group_in4 = {
570 .attrs = sis5595_attributes_in4,
573 static struct attribute *sis5595_attributes_temp1[] = {
574 &dev_attr_temp1_input.attr,
575 &dev_attr_temp1_max.attr,
576 &dev_attr_temp1_max_hyst.attr,
577 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
581 static const struct attribute_group sis5595_group_temp1 = {
582 .attrs = sis5595_attributes_temp1,
585 /* This is called when the module is loaded */
586 static int __devinit sis5595_probe(struct platform_device *pdev)
590 struct sis5595_data *data;
591 struct resource *res;
594 /* Reserve the ISA region */
595 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
596 if (!request_region(res->start, SIS5595_EXTENT,
597 sis5595_driver.driver.name)) {
602 data = kzalloc(sizeof(struct sis5595_data), GFP_KERNEL);
608 mutex_init(&data->lock);
609 mutex_init(&data->update_lock);
610 data->addr = res->start;
611 data->name = "sis5595";
612 platform_set_drvdata(pdev, data);
615 * Check revision and pin registers to determine whether 4 or 5 voltages
617 data->revision = s_bridge->revision;
618 /* 4 voltages, 1 temp */
620 if (data->revision >= REV2MIN) {
621 pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val);
623 /* 5 voltages, no temps */
627 /* Initialize the SIS5595 chip */
628 sis5595_init_device(data);
630 /* A few vars need to be filled upon startup */
631 for (i = 0; i < 2; i++) {
632 data->fan_min[i] = sis5595_read_value(data,
633 SIS5595_REG_FAN_MIN(i));
636 /* Register sysfs hooks */
637 err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group);
640 if (data->maxins == 4) {
641 err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group_in4);
643 goto exit_remove_files;
645 err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group_temp1);
647 goto exit_remove_files;
650 data->hwmon_dev = hwmon_device_register(&pdev->dev);
651 if (IS_ERR(data->hwmon_dev)) {
652 err = PTR_ERR(data->hwmon_dev);
653 goto exit_remove_files;
659 sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
660 sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
661 sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
665 release_region(res->start, SIS5595_EXTENT);
670 static int __devexit sis5595_remove(struct platform_device *pdev)
672 struct sis5595_data *data = platform_get_drvdata(pdev);
674 hwmon_device_unregister(data->hwmon_dev);
675 sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
676 sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
677 sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
679 release_region(data->addr, SIS5595_EXTENT);
680 platform_set_drvdata(pdev, NULL);
687 /* ISA access must be locked explicitly. */
688 static int sis5595_read_value(struct sis5595_data *data, u8 reg)
692 mutex_lock(&data->lock);
693 outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
694 res = inb_p(data->addr + SIS5595_DATA_REG_OFFSET);
695 mutex_unlock(&data->lock);
699 static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value)
701 mutex_lock(&data->lock);
702 outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
703 outb_p(value, data->addr + SIS5595_DATA_REG_OFFSET);
704 mutex_unlock(&data->lock);
707 /* Called when we have found a new SIS5595. */
708 static void __devinit sis5595_init_device(struct sis5595_data *data)
710 u8 config = sis5595_read_value(data, SIS5595_REG_CONFIG);
711 if (!(config & 0x01))
712 sis5595_write_value(data, SIS5595_REG_CONFIG,
713 (config & 0xf7) | 0x01);
716 static struct sis5595_data *sis5595_update_device(struct device *dev)
718 struct sis5595_data *data = dev_get_drvdata(dev);
721 mutex_lock(&data->update_lock);
723 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
726 for (i = 0; i <= data->maxins; i++) {
728 sis5595_read_value(data, SIS5595_REG_IN(i));
730 sis5595_read_value(data,
731 SIS5595_REG_IN_MIN(i));
733 sis5595_read_value(data,
734 SIS5595_REG_IN_MAX(i));
736 for (i = 0; i < 2; i++) {
738 sis5595_read_value(data, SIS5595_REG_FAN(i));
740 sis5595_read_value(data,
741 SIS5595_REG_FAN_MIN(i));
743 if (data->maxins == 3) {
745 sis5595_read_value(data, SIS5595_REG_TEMP);
747 sis5595_read_value(data, SIS5595_REG_TEMP_OVER);
749 sis5595_read_value(data, SIS5595_REG_TEMP_HYST);
751 i = sis5595_read_value(data, SIS5595_REG_FANDIV);
752 data->fan_div[0] = (i >> 4) & 0x03;
753 data->fan_div[1] = i >> 6;
755 sis5595_read_value(data, SIS5595_REG_ALARM1) |
756 (sis5595_read_value(data, SIS5595_REG_ALARM2) << 8);
757 data->last_updated = jiffies;
761 mutex_unlock(&data->update_lock);
766 static DEFINE_PCI_DEVICE_TABLE(sis5595_pci_ids) = {
767 { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
771 MODULE_DEVICE_TABLE(pci, sis5595_pci_ids);
773 static int blacklist[] __devinitdata = {
774 PCI_DEVICE_ID_SI_540,
775 PCI_DEVICE_ID_SI_550,
776 PCI_DEVICE_ID_SI_630,
777 PCI_DEVICE_ID_SI_645,
778 PCI_DEVICE_ID_SI_730,
779 PCI_DEVICE_ID_SI_735,
780 PCI_DEVICE_ID_SI_5511, /*
781 * 5513 chip has the 0008 device but
782 * that ID shows up in other chips so we
783 * use the 5511 ID for recognition
785 PCI_DEVICE_ID_SI_5597,
786 PCI_DEVICE_ID_SI_5598,
789 static int __devinit sis5595_device_add(unsigned short address)
791 struct resource res = {
793 .end = address + SIS5595_EXTENT - 1,
795 .flags = IORESOURCE_IO,
799 err = acpi_check_resource_conflict(&res);
803 pdev = platform_device_alloc("sis5595", address);
806 pr_err("Device allocation failed\n");
810 err = platform_device_add_resources(pdev, &res, 1);
812 pr_err("Device resource addition failed (%d)\n", err);
813 goto exit_device_put;
816 err = platform_device_add(pdev);
818 pr_err("Device addition failed (%d)\n", err);
819 goto exit_device_put;
825 platform_device_put(pdev);
830 static int __devinit sis5595_pci_probe(struct pci_dev *dev,
831 const struct pci_device_id *id)
837 for (i = blacklist; *i != 0; i++) {
839 d = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
842 "Looked for SIS5595 but found unsupported device %.4x\n",
849 force_addr &= ~(SIS5595_EXTENT - 1);
851 dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", force_addr);
852 pci_write_config_word(dev, SIS5595_BASE_REG, force_addr);
855 if (PCIBIOS_SUCCESSFUL !=
856 pci_read_config_word(dev, SIS5595_BASE_REG, &address)) {
857 dev_err(&dev->dev, "Failed to read ISA address\n");
861 address &= ~(SIS5595_EXTENT - 1);
864 "Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
867 if (force_addr && address != force_addr) {
868 /* doesn't work for some chips? */
869 dev_err(&dev->dev, "Failed to force ISA address\n");
873 if (PCIBIOS_SUCCESSFUL !=
874 pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) {
875 dev_err(&dev->dev, "Failed to read enable register\n");
878 if (!(enable & 0x80)) {
879 if ((PCIBIOS_SUCCESSFUL !=
880 pci_write_config_byte(dev, SIS5595_ENABLE_REG,
882 || (PCIBIOS_SUCCESSFUL !=
883 pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable))
884 || (!(enable & 0x80))) {
885 /* doesn't work for some chips! */
886 dev_err(&dev->dev, "Failed to enable HWM device\n");
891 if (platform_driver_register(&sis5595_driver)) {
892 dev_dbg(&dev->dev, "Failed to register sis5595 driver\n");
896 s_bridge = pci_dev_get(dev);
897 /* Sets global pdev as a side effect */
898 if (sis5595_device_add(address))
899 goto exit_unregister;
902 * Always return failure here. This is to allow other drivers to bind
903 * to this pci device. We don't really want to have control over the
904 * pci device, we only wanted to read as few register values from it.
910 platform_driver_unregister(&sis5595_driver);
915 static struct pci_driver sis5595_pci_driver = {
917 .id_table = sis5595_pci_ids,
918 .probe = sis5595_pci_probe,
921 static int __init sm_sis5595_init(void)
923 return pci_register_driver(&sis5595_pci_driver);
926 static void __exit sm_sis5595_exit(void)
928 pci_unregister_driver(&sis5595_pci_driver);
929 if (s_bridge != NULL) {
930 platform_device_unregister(pdev);
931 platform_driver_unregister(&sis5595_driver);
932 pci_dev_put(s_bridge);
937 MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
938 MODULE_DESCRIPTION("SiS 5595 Sensor device");
939 MODULE_LICENSE("GPL");
941 module_init(sm_sis5595_init);
942 module_exit(sm_sis5595_exit);