drivers/hwmon/w83781d.c

   1 /*
   2     w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
   3                 monitoring
   4     Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>,
   5                                Philip Edelbrock <phil@netroedge.com>,
   6                                and Mark Studebaker <mdsxyz123@yahoo.com>
   7     Copyright (c) 2007 - 2008  Jean Delvare <khali@linux-fr.org>
   8
   9     This program is free software; you can redistribute it and/or modify
  10     it under the terms of the GNU General Public License as published by
  11     the Free Software Foundation; either version 2 of the License, or
  12     (at your option) any later version.
  13
  14     This program is distributed in the hope that it will be useful,
  15     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17     GNU General Public License for more details.
  18
  19     You should have received a copy of the GNU General Public License
  20     along with this program; if not, write to the Free Software
  21     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22 */
  23
  24 /*
  25     Supports following chips:
  26
  27     Chip        #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
  28     as99127f    7       3       0       3       0x31    0x12c3  yes     no
  29     as99127f rev.2 (type_name = as99127f)       0x31    0x5ca3  yes     no
  30     w83781d     7       3       0       3       0x10-1  0x5ca3  yes     yes
  31     w83782d     9       3       2-4     3       0x30    0x5ca3  yes     yes
  32     w83783s     5-6     3       2       1-2     0x40    0x5ca3  yes     no
  33
  34 */
  35
  36 #include <linux/module.h>
  37 #include <linux/init.h>
  38 #include <linux/slab.h>
  39 #include <linux/jiffies.h>
  40 #include <linux/i2c.h>
  41 #include <linux/hwmon.h>
  42 #include <linux/hwmon-vid.h>
  43 #include <linux/hwmon-sysfs.h>
  44 #include <linux/sysfs.h>
  45 #include <linux/err.h>
  46 #include <linux/mutex.h>
  47
  48 #ifdef CONFIG_ISA
  49 #include <linux/platform_device.h>
  50 #include <linux/ioport.h>
  51 #include <asm/io.h>
  52 #endif
  53
  54 #include "lm75.h"
  55
  56 /* Addresses to scan */
  57 static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
  58                                                 0x2e, 0x2f, I2C_CLIENT_END };
  59 /* Insmod parameters */
  60 I2C_CLIENT_INSMOD_4(w83781d, w83782d, w83783s, as99127f);
  61
  62 static unsigned short force_subclients[4];
  63 module_param_array(force_subclients, short, NULL, 0);
  64 MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
  65                     "{bus, clientaddr, subclientaddr1, subclientaddr2}");
  66
  67 static int reset;
  68 module_param(reset, bool, 0);
  69 MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
  70
  71 static int init = 1;
  72 module_param(init, bool, 0);
  73 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
  74
  75 /* Constants specified below */
  76
  77 /* Length of ISA address segment */
  78 #define W83781D_EXTENT                  8
  79
  80 /* Where are the ISA address/data registers relative to the base address */
  81 #define W83781D_ADDR_REG_OFFSET         5
  82 #define W83781D_DATA_REG_OFFSET         6
  83
  84 /* The device registers */
  85 /* in nr from 0 to 8 */
  86 #define W83781D_REG_IN_MAX(nr)          ((nr < 7) ? (0x2b + (nr) * 2) : \
  87                                                     (0x554 + (((nr) - 7) * 2)))
  88 #define W83781D_REG_IN_MIN(nr)          ((nr < 7) ? (0x2c + (nr) * 2) : \
  89                                                     (0x555 + (((nr) - 7) * 2)))
  90 #define W83781D_REG_IN(nr)              ((nr < 7) ? (0x20 + (nr)) : \
  91                                                     (0x550 + (nr) - 7))
  92
  93 /* fan nr from 0 to 2 */
  94 #define W83781D_REG_FAN_MIN(nr)         (0x3b + (nr))
  95 #define W83781D_REG_FAN(nr)             (0x28 + (nr))
  96
  97 #define W83781D_REG_BANK                0x4E
  98 #define W83781D_REG_TEMP2_CONFIG        0x152
  99 #define W83781D_REG_TEMP3_CONFIG        0x252
 100 /* temp nr from 1 to 3 */
 101 #define W83781D_REG_TEMP(nr)            ((nr == 3) ? (0x0250) : \
 102                                         ((nr == 2) ? (0x0150) : \
 103                                                      (0x27)))
 104 #define W83781D_REG_TEMP_HYST(nr)       ((nr == 3) ? (0x253) : \
 105                                         ((nr == 2) ? (0x153) : \
 106                                                      (0x3A)))
 107 #define W83781D_REG_TEMP_OVER(nr)       ((nr == 3) ? (0x255) : \
 108                                         ((nr == 2) ? (0x155) : \
 109                                                      (0x39)))
 110
 111 #define W83781D_REG_CONFIG              0x40
 112
 113 /* Interrupt status (W83781D, AS99127F) */
 114 #define W83781D_REG_ALARM1              0x41
 115 #define W83781D_REG_ALARM2              0x42
 116
 117 /* Real-time status (W83782D, W83783S) */
 118 #define W83782D_REG_ALARM1              0x459
 119 #define W83782D_REG_ALARM2              0x45A
 120 #define W83782D_REG_ALARM3              0x45B
 121
 122 #define W83781D_REG_BEEP_CONFIG         0x4D
 123 #define W83781D_REG_BEEP_INTS1          0x56
 124 #define W83781D_REG_BEEP_INTS2          0x57
 125 #define W83781D_REG_BEEP_INTS3          0x453   /* not on W83781D */
 126
 127 #define W83781D_REG_VID_FANDIV          0x47
 128
 129 #define W83781D_REG_CHIPID              0x49
 130 #define W83781D_REG_WCHIPID             0x58
 131 #define W83781D_REG_CHIPMAN             0x4F
 132 #define W83781D_REG_PIN                 0x4B
 133
 134 /* 782D/783S only */
 135 #define W83781D_REG_VBAT                0x5D
 136
 137 /* PWM 782D (1-4) and 783S (1-2) only */
 138 static const u8 W83781D_REG_PWM[] = { 0x5B, 0x5A, 0x5E, 0x5F };
 139 #define W83781D_REG_PWMCLK12            0x5C
 140 #define W83781D_REG_PWMCLK34            0x45C
 141
 142 #define W83781D_REG_I2C_ADDR            0x48
 143 #define W83781D_REG_I2C_SUBADDR         0x4A
 144
 145 /* The following are undocumented in the data sheets however we
 146    received the information in an email from Winbond tech support */
 147 /* Sensor selection - not on 781d */
 148 #define W83781D_REG_SCFG1               0x5D
 149 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
 150
 151 #define W83781D_REG_SCFG2               0x59
 152 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
 153
 154 #define W83781D_DEFAULT_BETA            3435
 155
 156 /* Conversions */
 157 #define IN_TO_REG(val)                  SENSORS_LIMIT(((val) + 8) / 16, 0, 255)
 158 #define IN_FROM_REG(val)                ((val) * 16)
 159
 160 static inline u8
 161 FAN_TO_REG(long rpm, int div)
 162 {
 163         if (rpm == 0)
 164                 return 255;
 165         rpm = SENSORS_LIMIT(rpm, 1, 1000000);
 166         return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
 167 }
 168
 169 static inline long
 170 FAN_FROM_REG(u8 val, int div)
 171 {
 172         if (val == 0)
 173                 return -1;
 174         if (val == 255)
 175                 return 0;
 176         return 1350000 / (val * div);
 177 }
 178
 179 #define TEMP_TO_REG(val)                SENSORS_LIMIT((val) / 1000, -127, 128)
 180 #define TEMP_FROM_REG(val)              ((val) * 1000)
 181
 182 #define BEEP_MASK_FROM_REG(val,type)    ((type) == as99127f ? \
 183                                          (~(val)) & 0x7fff : (val) & 0xff7fff)
 184 #define BEEP_MASK_TO_REG(val,type)      ((type) == as99127f ? \
 185                                          (~(val)) & 0x7fff : (val) & 0xff7fff)
 186
 187 #define DIV_FROM_REG(val)               (1 << (val))
 188
 189 static inline u8
 190 DIV_TO_REG(long val, enum chips type)
 191 {
 192         int i;
 193         val = SENSORS_LIMIT(val, 1,
 194                             ((type == w83781d
 195                               || type == as99127f) ? 8 : 128)) >> 1;
 196         for (i = 0; i < 7; i++) {
 197                 if (val == 0)
 198                         break;
 199                 val >>= 1;
 200         }
 201         return i;
 202 }
 203
 204 struct w83781d_data {
 205         struct i2c_client *client;
 206         struct device *hwmon_dev;
 207         struct mutex lock;
 208         enum chips type;
 209
 210         /* For ISA device only */
 211         const char *name;
 212         int isa_addr;
 213
 214         struct mutex update_lock;
 215         char valid;             /* !=0 if following fields are valid */
 216         unsigned long last_updated;     /* In jiffies */
 217
 218         struct i2c_client *lm75[2];     /* for secondary I2C addresses */
 219         /* array of 2 pointers to subclients */
 220
 221         u8 in[9];               /* Register value - 8 & 9 for 782D only */
 222         u8 in_max[9];           /* Register value - 8 & 9 for 782D only */
 223         u8 in_min[9];           /* Register value - 8 & 9 for 782D only */
 224         u8 fan[3];              /* Register value */
 225         u8 fan_min[3];          /* Register value */
 226         s8 temp;                /* Register value */
 227         s8 temp_max;            /* Register value */
 228         s8 temp_max_hyst;       /* Register value */
 229         u16 temp_add[2];        /* Register value */
 230         u16 temp_max_add[2];    /* Register value */
 231         u16 temp_max_hyst_add[2];       /* Register value */
 232         u8 fan_div[3];          /* Register encoding, shifted right */
 233         u8 vid;                 /* Register encoding, combined */
 234         u32 alarms;             /* Register encoding, combined */
 235         u32 beep_mask;          /* Register encoding, combined */
 236         u8 pwm[4];              /* Register value */
 237         u8 pwm2_enable;         /* Boolean */
 238         u16 sens[3];            /* 782D/783S only.
 239                                    1 = pentium diode; 2 = 3904 diode;
 240                                    4 = thermistor */
 241         u8 vrm;
 242 };
 243
 244 static struct w83781d_data *w83781d_data_if_isa(void);
 245 static int w83781d_alias_detect(struct i2c_client *client, u8 chipid);
 246
 247 static int w83781d_read_value(struct w83781d_data *data, u16 reg);
 248 static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value);
 249 static struct w83781d_data *w83781d_update_device(struct device *dev);
 250 static void w83781d_init_device(struct device *dev);
 251
 252 /* following are the sysfs callback functions */
 253 #define show_in_reg(reg) \
 254 static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
 255                 char *buf) \
 256 { \
 257         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 258         struct w83781d_data *data = w83781d_update_device(dev); \
 259         return sprintf(buf, "%ld\n", \
 260                        (long)IN_FROM_REG(data->reg[attr->index])); \
 261 }
 262 show_in_reg(in);
 263 show_in_reg(in_min);
 264 show_in_reg(in_max);
 265
 266 #define store_in_reg(REG, reg) \
 267 static ssize_t store_in_##reg (struct device *dev, struct device_attribute \
 268                 *da, const char *buf, size_t count) \
 269 { \
 270         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 271         struct w83781d_data *data = dev_get_drvdata(dev); \
 272         int nr = attr->index; \
 273         u32 val; \
 274          \
 275         val = simple_strtoul(buf, NULL, 10); \
 276          \
 277         mutex_lock(&data->update_lock); \
 278         data->in_##reg[nr] = IN_TO_REG(val); \
 279         w83781d_write_value(data, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
 280          \
 281         mutex_unlock(&data->update_lock); \
 282         return count; \
 283 }
 284 store_in_reg(MIN, min);
 285 store_in_reg(MAX, max);
 286
 287 #define sysfs_in_offsets(offset) \
 288 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
 289                 show_in, NULL, offset); \
 290 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
 291                 show_in_min, store_in_min, offset); \
 292 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
 293                 show_in_max, store_in_max, offset)
 294
 295 sysfs_in_offsets(0);
 296 sysfs_in_offsets(1);
 297 sysfs_in_offsets(2);
 298 sysfs_in_offsets(3);
 299 sysfs_in_offsets(4);
 300 sysfs_in_offsets(5);
 301 sysfs_in_offsets(6);
 302 sysfs_in_offsets(7);
 303 sysfs_in_offsets(8);
 304
 305 #define show_fan_reg(reg) \
 306 static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
 307                 char *buf) \
 308 { \
 309         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 310         struct w83781d_data *data = w83781d_update_device(dev); \
 311         return sprintf(buf,"%ld\n", \
 312                 FAN_FROM_REG(data->reg[attr->index], \
 313                         DIV_FROM_REG(data->fan_div[attr->index]))); \
 314 }
 315 show_fan_reg(fan);
 316 show_fan_reg(fan_min);
 317
 318 static ssize_t
 319 store_fan_min(struct device *dev, struct device_attribute *da,
 320                 const char *buf, size_t count)
 321 {
 322         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 323         struct w83781d_data *data = dev_get_drvdata(dev);
 324         int nr = attr->index;
 325         u32 val;
 326
 327         val = simple_strtoul(buf, NULL, 10);
 328
 329         mutex_lock(&data->update_lock);
 330         data->fan_min[nr] =
 331             FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 332         w83781d_write_value(data, W83781D_REG_FAN_MIN(nr),
 333                             data->fan_min[nr]);
 334
 335         mutex_unlock(&data->update_lock);
 336         return count;
 337 }
 338
 339 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
 340 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
 341                 show_fan_min, store_fan_min, 0);
 342 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 343 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
 344                 show_fan_min, store_fan_min, 1);
 345 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
 346 static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
 347                 show_fan_min, store_fan_min, 2);
 348
 349 #define show_temp_reg(reg) \
 350 static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
 351                 char *buf) \
 352 { \
 353         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 354         struct w83781d_data *data = w83781d_update_device(dev); \
 355         int nr = attr->index; \
 356         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
 357                 return sprintf(buf,"%d\n", \
 358                         LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
 359         } else {        /* TEMP1 */ \
 360                 return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
 361         } \
 362 }
 363 show_temp_reg(temp);
 364 show_temp_reg(temp_max);
 365 show_temp_reg(temp_max_hyst);
 366
 367 #define store_temp_reg(REG, reg) \
 368 static ssize_t store_temp_##reg (struct device *dev, \
 369                 struct device_attribute *da, const char *buf, size_t count) \
 370 { \
 371         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 372         struct w83781d_data *data = dev_get_drvdata(dev); \
 373         int nr = attr->index; \
 374         long val; \
 375          \
 376         val = simple_strtol(buf, NULL, 10); \
 377          \
 378         mutex_lock(&data->update_lock); \
 379          \
 380         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
 381                 data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
 382                 w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
 383                                 data->temp_##reg##_add[nr-2]); \
 384         } else {        /* TEMP1 */ \
 385                 data->temp_##reg = TEMP_TO_REG(val); \
 386                 w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
 387                         data->temp_##reg); \
 388         } \
 389          \
 390         mutex_unlock(&data->update_lock); \
 391         return count; \
 392 }
 393 store_temp_reg(OVER, max);
 394 store_temp_reg(HYST, max_hyst);
 395
 396 #define sysfs_temp_offsets(offset) \
 397 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
 398                 show_temp, NULL, offset); \
 399 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
 400                 show_temp_max, store_temp_max, offset); \
 401 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
 402                 show_temp_max_hyst, store_temp_max_hyst, offset);
 403
 404 sysfs_temp_offsets(1);
 405 sysfs_temp_offsets(2);
 406 sysfs_temp_offsets(3);
 407
 408 static ssize_t
 409 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
 410 {
 411         struct w83781d_data *data = w83781d_update_device(dev);
 412         return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
 413 }
 414
 415 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 416
 417 static ssize_t
 418 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
 419 {
 420         struct w83781d_data *data = dev_get_drvdata(dev);
 421         return sprintf(buf, "%ld\n", (long) data->vrm);
 422 }
 423
 424 static ssize_t
 425 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 426 {
 427         struct w83781d_data *data = dev_get_drvdata(dev);
 428         u32 val;
 429
 430         val = simple_strtoul(buf, NULL, 10);
 431         data->vrm = val;
 432
 433         return count;
 434 }
 435
 436 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
 437
 438 static ssize_t
 439 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
 440 {
 441         struct w83781d_data *data = w83781d_update_device(dev);
 442         return sprintf(buf, "%u\n", data->alarms);
 443 }
 444
 445 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
 446
 447 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 448                 char *buf)
 449 {
 450         struct w83781d_data *data = w83781d_update_device(dev);
 451         int bitnr = to_sensor_dev_attr(attr)->index;
 452         return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 453 }
 454
 455 /* The W83781D has a single alarm bit for temp2 and temp3 */
 456 static ssize_t show_temp3_alarm(struct device *dev,
 457                 struct device_attribute *attr, char *buf)
 458 {
 459         struct w83781d_data *data = w83781d_update_device(dev);
 460         int bitnr = (data->type == w83781d) ? 5 : 13;
 461         return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 462 }
 463
 464 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
 465 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
 466 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
 467 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
 468 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
 469 static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
 470 static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
 471 static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
 472 static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
 473 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
 474 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
 475 static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
 476 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
 477 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
 478 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp3_alarm, NULL, 0);
 479
 480 static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr, char *buf)
 481 {
 482         struct w83781d_data *data = w83781d_update_device(dev);
 483         return sprintf(buf, "%ld\n",
 484                        (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
 485 }
 486
 487 static ssize_t
 488 store_beep_mask(struct device *dev, struct device_attribute *attr,
 489                 const char *buf, size_t count)
 490 {
 491         struct w83781d_data *data = dev_get_drvdata(dev);
 492         u32 val;
 493
 494         val = simple_strtoul(buf, NULL, 10);
 495
 496         mutex_lock(&data->update_lock);
 497         data->beep_mask &= 0x8000; /* preserve beep enable */
 498         data->beep_mask |= BEEP_MASK_TO_REG(val, data->type);
 499         w83781d_write_value(data, W83781D_REG_BEEP_INTS1,
 500                             data->beep_mask & 0xff);
 501         w83781d_write_value(data, W83781D_REG_BEEP_INTS2,
 502                             (data->beep_mask >> 8) & 0xff);
 503         if (data->type != w83781d && data->type != as99127f) {
 504                 w83781d_write_value(data, W83781D_REG_BEEP_INTS3,
 505                                     ((data->beep_mask) >> 16) & 0xff);
 506         }
 507         mutex_unlock(&data->update_lock);
 508
 509         return count;
 510 }
 511
 512 static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
 513                 show_beep_mask, store_beep_mask);
 514
 515 static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
 516                 char *buf)
 517 {
 518         struct w83781d_data *data = w83781d_update_device(dev);
 519         int bitnr = to_sensor_dev_attr(attr)->index;
 520         return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 521 }
 522
 523 static ssize_t
 524 store_beep(struct device *dev, struct device_attribute *attr,
 525                 const char *buf, size_t count)
 526 {
 527         struct w83781d_data *data = dev_get_drvdata(dev);
 528         int bitnr = to_sensor_dev_attr(attr)->index;
 529         unsigned long bit;
 530         u8 reg;
 531
 532         bit = simple_strtoul(buf, NULL, 10);
 533         if (bit & ~1)
 534                 return -EINVAL;
 535
 536         mutex_lock(&data->update_lock);
 537         if (bit)
 538                 data->beep_mask |= (1 << bitnr);
 539         else
 540                 data->beep_mask &= ~(1 << bitnr);
 541
 542         if (bitnr < 8) {
 543                 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
 544                 if (bit)
 545                         reg |= (1 << bitnr);
 546                 else
 547                         reg &= ~(1 << bitnr);
 548                 w83781d_write_value(data, W83781D_REG_BEEP_INTS1, reg);
 549         } else if (bitnr < 16) {
 550                 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
 551                 if (bit)
 552                         reg |= (1 << (bitnr - 8));
 553                 else
 554                         reg &= ~(1 << (bitnr - 8));
 555                 w83781d_write_value(data, W83781D_REG_BEEP_INTS2, reg);
 556         } else {
 557                 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS3);
 558                 if (bit)
 559                         reg |= (1 << (bitnr - 16));
 560                 else
 561                         reg &= ~(1 << (bitnr - 16));
 562                 w83781d_write_value(data, W83781D_REG_BEEP_INTS3, reg);
 563         }
 564         mutex_unlock(&data->update_lock);
 565
 566         return count;
 567 }
 568
 569 /* The W83781D has a single beep bit for temp2 and temp3 */
 570 static ssize_t show_temp3_beep(struct device *dev,
 571                 struct device_attribute *attr, char *buf)
 572 {
 573         struct w83781d_data *data = w83781d_update_device(dev);
 574         int bitnr = (data->type == w83781d) ? 5 : 13;
 575         return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 576 }
 577
 578 static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
 579                         show_beep, store_beep, 0);
 580 static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
 581                         show_beep, store_beep, 1);
 582 static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
 583                         show_beep, store_beep, 2);
 584 static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
 585                         show_beep, store_beep, 3);
 586 static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
 587                         show_beep, store_beep, 8);
 588 static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
 589                         show_beep, store_beep, 9);
 590 static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
 591                         show_beep, store_beep, 10);
 592 static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
 593                         show_beep, store_beep, 16);
 594 static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
 595                         show_beep, store_beep, 17);
 596 static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
 597                         show_beep, store_beep, 6);
 598 static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
 599                         show_beep, store_beep, 7);
 600 static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
 601                         show_beep, store_beep, 11);
 602 static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
 603                         show_beep, store_beep, 4);
 604 static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
 605                         show_beep, store_beep, 5);
 606 static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO,
 607                         show_temp3_beep, store_beep, 13);
 608 static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
 609                         show_beep, store_beep, 15);
 610
 611 static ssize_t
 612 show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
 613 {
 614         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 615         struct w83781d_data *data = w83781d_update_device(dev);
 616         return sprintf(buf, "%ld\n",
 617                        (long) DIV_FROM_REG(data->fan_div[attr->index]));
 618 }
 619
 620 /* Note: we save and restore the fan minimum here, because its value is
 621    determined in part by the fan divisor.  This follows the principle of
 622    least surprise; the user doesn't expect the fan minimum to change just
 623    because the divisor changed. */
 624 static ssize_t
 625 store_fan_div(struct device *dev, struct device_attribute *da,
 626                 const char *buf, size_t count)
 627 {
 628         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 629         struct w83781d_data *data = dev_get_drvdata(dev);
 630         unsigned long min;
 631         int nr = attr->index;
 632         u8 reg;
 633         unsigned long val = simple_strtoul(buf, NULL, 10);
 634
 635         mutex_lock(&data->update_lock);
 636
 637         /* Save fan_min */
 638         min = FAN_FROM_REG(data->fan_min[nr],
 639                            DIV_FROM_REG(data->fan_div[nr]));
 640
 641         data->fan_div[nr] = DIV_TO_REG(val, data->type);
 642
 643         reg = (w83781d_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
 644                & (nr==0 ? 0xcf : 0x3f))
 645             | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
 646         w83781d_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
 647
 648         /* w83781d and as99127f don't have extended divisor bits */
 649         if (data->type != w83781d && data->type != as99127f) {
 650                 reg = (w83781d_read_value(data, W83781D_REG_VBAT)
 651                        & ~(1 << (5 + nr)))
 652                     | ((data->fan_div[nr] & 0x04) << (3 + nr));
 653                 w83781d_write_value(data, W83781D_REG_VBAT, reg);
 654         }
 655
 656         /* Restore fan_min */
 657         data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 658         w83781d_write_value(data, W83781D_REG_FAN_MIN(nr), data->fan_min[nr]);
 659
 660         mutex_unlock(&data->update_lock);
 661         return count;
 662 }
 663
 664 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
 665                 show_fan_div, store_fan_div, 0);
 666 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
 667                 show_fan_div, store_fan_div, 1);
 668 static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR,
 669                 show_fan_div, store_fan_div, 2);
 670
 671 static ssize_t
 672 show_pwm(struct device *dev, struct device_attribute *da, char *buf)
 673 {
 674         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 675         struct w83781d_data *data = w83781d_update_device(dev);
 676         return sprintf(buf, "%d\n", (int)data->pwm[attr->index]);
 677 }
 678
 679 static ssize_t
 680 show_pwm2_enable(struct device *dev, struct device_attribute *da, char *buf)
 681 {
 682         struct w83781d_data *data = w83781d_update_device(dev);
 683         return sprintf(buf, "%d\n", (int)data->pwm2_enable);
 684 }
 685
 686 static ssize_t
 687 store_pwm(struct device *dev, struct device_attribute *da, const char *buf,
 688                 size_t count)
 689 {
 690         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 691         struct w83781d_data *data = dev_get_drvdata(dev);
 692         int nr = attr->index;
 693         u32 val;
 694
 695         val = simple_strtoul(buf, NULL, 10);
 696
 697         mutex_lock(&data->update_lock);
 698         data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
 699         w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]);
 700         mutex_unlock(&data->update_lock);
 701         return count;
 702 }
 703
 704 static ssize_t
 705 store_pwm2_enable(struct device *dev, struct device_attribute *da,
 706                 const char *buf, size_t count)
 707 {
 708         struct w83781d_data *data = dev_get_drvdata(dev);
 709         u32 val, reg;
 710
 711         val = simple_strtoul(buf, NULL, 10);
 712
 713         mutex_lock(&data->update_lock);
 714
 715         switch (val) {
 716         case 0:
 717         case 1:
 718                 reg = w83781d_read_value(data, W83781D_REG_PWMCLK12);
 719                 w83781d_write_value(data, W83781D_REG_PWMCLK12,
 720                                     (reg & 0xf7) | (val << 3));
 721
 722                 reg = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
 723                 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG,
 724                                     (reg & 0xef) | (!val << 4));
 725
 726                 data->pwm2_enable = val;
 727                 break;
 728
 729         default:
 730                 mutex_unlock(&data->update_lock);
 731                 return -EINVAL;
 732         }
 733
 734         mutex_unlock(&data->update_lock);
 735         return count;
 736 }
 737
 738 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 0);
 739 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 1);
 740 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 2);
 741 static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 3);
 742 /* only PWM2 can be enabled/disabled */
 743 static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
 744                 show_pwm2_enable, store_pwm2_enable);
 745
 746 static ssize_t
 747 show_sensor(struct device *dev, struct device_attribute *da, char *buf)
 748 {
 749         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 750         struct w83781d_data *data = w83781d_update_device(dev);
 751         return sprintf(buf, "%d\n", (int)data->sens[attr->index]);
 752 }
 753
 754 static ssize_t
 755 store_sensor(struct device *dev, struct device_attribute *da,
 756                 const char *buf, size_t count)
 757 {
 758         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 759         struct w83781d_data *data = dev_get_drvdata(dev);
 760         int nr = attr->index;
 761         u32 val, tmp;
 762
 763         val = simple_strtoul(buf, NULL, 10);
 764
 765         mutex_lock(&data->update_lock);
 766
 767         switch (val) {
 768         case 1:         /* PII/Celeron diode */
 769                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 770                 w83781d_write_value(data, W83781D_REG_SCFG1,
 771                                     tmp | BIT_SCFG1[nr]);
 772                 tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
 773                 w83781d_write_value(data, W83781D_REG_SCFG2,
 774                                     tmp | BIT_SCFG2[nr]);
 775                 data->sens[nr] = val;
 776                 break;
 777         case 2:         /* 3904 */
 778                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 779                 w83781d_write_value(data, W83781D_REG_SCFG1,
 780                                     tmp | BIT_SCFG1[nr]);
 781                 tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
 782                 w83781d_write_value(data, W83781D_REG_SCFG2,
 783                                     tmp & ~BIT_SCFG2[nr]);
 784                 data->sens[nr] = val;
 785                 break;
 786         case W83781D_DEFAULT_BETA:
 787                 dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
 788                          "instead\n", W83781D_DEFAULT_BETA);
 789                 /* fall through */
 790         case 4:         /* thermistor */
 791                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 792                 w83781d_write_value(data, W83781D_REG_SCFG1,
 793                                     tmp & ~BIT_SCFG1[nr]);
 794                 data->sens[nr] = val;
 795                 break;
 796         default:
 797                 dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or 4\n",
 798                        (long) val);
 799                 break;
 800         }
 801
 802         mutex_unlock(&data->update_lock);
 803         return count;
 804 }
 805
 806 static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
 807         show_sensor, store_sensor, 0);
 808 static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
 809         show_sensor, store_sensor, 1);
 810 static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
 811         show_sensor, store_sensor, 2);
 812
 813 /* Assumes that adapter is of I2C, not ISA variety.
 814  * OTHERWISE DON'T CALL THIS
 815  */
 816 static int
 817 w83781d_detect_subclients(struct i2c_client *new_client)
 818 {
 819         int i, val1 = 0, id;
 820         int err;
 821         int address = new_client->addr;
 822         unsigned short sc_addr[2];
 823         struct i2c_adapter *adapter = new_client->adapter;
 824         struct w83781d_data *data = i2c_get_clientdata(new_client);
 825         enum chips kind = data->type;
 826
 827         id = i2c_adapter_id(adapter);
 828
 829         if (force_subclients[0] == id && force_subclients[1] == address) {
 830                 for (i = 2; i <= 3; i++) {
 831                         if (force_subclients[i] < 0x48 ||
 832                             force_subclients[i] > 0x4f) {
 833                                 dev_err(&new_client->dev, "Invalid subclient "
 834                                         "address %d; must be 0x48-0x4f\n",
 835                                         force_subclients[i]);
 836                                 err = -EINVAL;
 837                                 goto ERROR_SC_1;
 838                         }
 839                 }
 840                 w83781d_write_value(data, W83781D_REG_I2C_SUBADDR,
 841                                 (force_subclients[2] & 0x07) |
 842                                 ((force_subclients[3] & 0x07) << 4));
 843                 sc_addr[0] = force_subclients[2];
 844         } else {
 845                 val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR);
 846                 sc_addr[0] = 0x48 + (val1 & 0x07);
 847         }
 848
 849         if (kind != w83783s) {
 850                 if (force_subclients[0] == id &&
 851                     force_subclients[1] == address) {
 852                         sc_addr[1] = force_subclients[3];
 853                 } else {
 854                         sc_addr[1] = 0x48 + ((val1 >> 4) & 0x07);
 855                 }
 856                 if (sc_addr[0] == sc_addr[1]) {
 857                         dev_err(&new_client->dev,
 858                                "Duplicate addresses 0x%x for subclients.\n",
 859                                sc_addr[0]);
 860                         err = -EBUSY;
 861                         goto ERROR_SC_2;
 862                 }
 863         }
 864
 865         for (i = 0; i <= 1; i++) {
 866                 data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]);
 867                 if (!data->lm75[i]) {
 868                         dev_err(&new_client->dev, "Subclient %d "
 869                                 "registration at address 0x%x "
 870                                 "failed.\n", i, sc_addr[i]);
 871                         err = -ENOMEM;
 872                         if (i == 1)
 873                                 goto ERROR_SC_3;
 874                         goto ERROR_SC_2;
 875                 }
 876                 if (kind == w83783s)
 877                         break;
 878         }
 879
 880         return 0;
 881
 882 /* Undo inits in case of errors */
 883 ERROR_SC_3:
 884         i2c_unregister_device(data->lm75[0]);
 885 ERROR_SC_2:
 886 ERROR_SC_1:
 887         return err;
 888 }
 889
 890 #define IN_UNIT_ATTRS(X)                                        \
 891         &sensor_dev_attr_in##X##_input.dev_attr.attr,           \
 892         &sensor_dev_attr_in##X##_min.dev_attr.attr,             \
 893         &sensor_dev_attr_in##X##_max.dev_attr.attr,             \
 894         &sensor_dev_attr_in##X##_alarm.dev_attr.attr,           \
 895         &sensor_dev_attr_in##X##_beep.dev_attr.attr
 896
 897 #define FAN_UNIT_ATTRS(X)                                       \
 898         &sensor_dev_attr_fan##X##_input.dev_attr.attr,          \
 899         &sensor_dev_attr_fan##X##_min.dev_attr.attr,            \
 900         &sensor_dev_attr_fan##X##_div.dev_attr.attr,            \
 901         &sensor_dev_attr_fan##X##_alarm.dev_attr.attr,          \
 902         &sensor_dev_attr_fan##X##_beep.dev_attr.attr
 903
 904 #define TEMP_UNIT_ATTRS(X)                                      \
 905         &sensor_dev_attr_temp##X##_input.dev_attr.attr,         \
 906         &sensor_dev_attr_temp##X##_max.dev_attr.attr,           \
 907         &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr,      \
 908         &sensor_dev_attr_temp##X##_alarm.dev_attr.attr,         \
 909         &sensor_dev_attr_temp##X##_beep.dev_attr.attr
 910
 911 static struct attribute* w83781d_attributes[] = {
 912         IN_UNIT_ATTRS(0),
 913         IN_UNIT_ATTRS(2),
 914         IN_UNIT_ATTRS(3),
 915         IN_UNIT_ATTRS(4),
 916         IN_UNIT_ATTRS(5),
 917         IN_UNIT_ATTRS(6),
 918         FAN_UNIT_ATTRS(1),
 919         FAN_UNIT_ATTRS(2),
 920         FAN_UNIT_ATTRS(3),
 921         TEMP_UNIT_ATTRS(1),
 922         TEMP_UNIT_ATTRS(2),
 923         &dev_attr_cpu0_vid.attr,
 924         &dev_attr_vrm.attr,
 925         &dev_attr_alarms.attr,
 926         &dev_attr_beep_mask.attr,
 927         &sensor_dev_attr_beep_enable.dev_attr.attr,
 928         NULL
 929 };
 930 static const struct attribute_group w83781d_group = {
 931         .attrs = w83781d_attributes,
 932 };
 933
 934 static struct attribute *w83781d_attributes_opt[] = {
 935         IN_UNIT_ATTRS(1),
 936         IN_UNIT_ATTRS(7),
 937         IN_UNIT_ATTRS(8),
 938         TEMP_UNIT_ATTRS(3),
 939         &sensor_dev_attr_pwm1.dev_attr.attr,
 940         &sensor_dev_attr_pwm2.dev_attr.attr,
 941         &sensor_dev_attr_pwm3.dev_attr.attr,
 942         &sensor_dev_attr_pwm4.dev_attr.attr,
 943         &dev_attr_pwm2_enable.attr,
 944         &sensor_dev_attr_temp1_type.dev_attr.attr,
 945         &sensor_dev_attr_temp2_type.dev_attr.attr,
 946         &sensor_dev_attr_temp3_type.dev_attr.attr,
 947         NULL
 948 };
 949 static const struct attribute_group w83781d_group_opt = {
 950         .attrs = w83781d_attributes_opt,
 951 };
 952
 953 /* No clean up is done on error, it's up to the caller */
 954 static int
 955 w83781d_create_files(struct device *dev, int kind, int is_isa)
 956 {
 957         int err;
 958
 959         if ((err = sysfs_create_group(&dev->kobj, &w83781d_group)))
 960                 return err;
 961
 962         if (kind != w83783s) {
 963                 if ((err = device_create_file(dev,
 964                                 &sensor_dev_attr_in1_input.dev_attr))
 965                     || (err = device_create_file(dev,
 966                                 &sensor_dev_attr_in1_min.dev_attr))
 967                     || (err = device_create_file(dev,
 968                                 &sensor_dev_attr_in1_max.dev_attr))
 969                     || (err = device_create_file(dev,
 970                                 &sensor_dev_attr_in1_alarm.dev_attr))
 971                     || (err = device_create_file(dev,
 972                                 &sensor_dev_attr_in1_beep.dev_attr)))
 973                         return err;
 974         }
 975         if (kind != as99127f && kind != w83781d && kind != w83783s) {
 976                 if ((err = device_create_file(dev,
 977                                 &sensor_dev_attr_in7_input.dev_attr))
 978                     || (err = device_create_file(dev,
 979                                 &sensor_dev_attr_in7_min.dev_attr))
 980                     || (err = device_create_file(dev,
 981                                 &sensor_dev_attr_in7_max.dev_attr))
 982                     || (err = device_create_file(dev,
 983                                 &sensor_dev_attr_in7_alarm.dev_attr))
 984                     || (err = device_create_file(dev,
 985                                 &sensor_dev_attr_in7_beep.dev_attr))
 986                     || (err = device_create_file(dev,
 987                                 &sensor_dev_attr_in8_input.dev_attr))
 988                     || (err = device_create_file(dev,
 989                                 &sensor_dev_attr_in8_min.dev_attr))
 990                     || (err = device_create_file(dev,
 991                                 &sensor_dev_attr_in8_max.dev_attr))
 992                     || (err = device_create_file(dev,
 993                                 &sensor_dev_attr_in8_alarm.dev_attr))
 994                     || (err = device_create_file(dev,
 995                                 &sensor_dev_attr_in8_beep.dev_attr)))
 996                         return err;
 997         }
 998         if (kind != w83783s) {
 999                 if ((err = device_create_file(dev,
1000                                 &sensor_dev_attr_temp3_input.dev_attr))
1001                     || (err = device_create_file(dev,
1002                                 &sensor_dev_attr_temp3_max.dev_attr))
1003                     || (err = device_create_file(dev,
1004                                 &sensor_dev_attr_temp3_max_hyst.dev_attr))
1005                     || (err = device_create_file(dev,
1006                                 &sensor_dev_attr_temp3_alarm.dev_attr))
1007                     || (err = device_create_file(dev,
1008                                 &sensor_dev_attr_temp3_beep.dev_attr)))
1009                         return err;
1010
1011                 if (kind != w83781d) {
1012                         err = sysfs_chmod_file(&dev->kobj,
1013                                 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1014                                 S_IRUGO | S_IWUSR);
1015                         if (err)
1016                                 return err;
1017                 }
1018         }
1019
1020         if (kind != w83781d && kind != as99127f) {
1021                 if ((err = device_create_file(dev,
1022                                 &sensor_dev_attr_pwm1.dev_attr))
1023                     || (err = device_create_file(dev,
1024                                 &sensor_dev_attr_pwm2.dev_attr))
1025                     || (err = device_create_file(dev, &dev_attr_pwm2_enable)))
1026                         return err;
1027         }
1028         if (kind == w83782d && !is_isa) {
1029                 if ((err = device_create_file(dev,
1030                                 &sensor_dev_attr_pwm3.dev_attr))
1031                     || (err = device_create_file(dev,
1032                                 &sensor_dev_attr_pwm4.dev_attr)))
1033                         return err;
1034         }
1035
1036         if (kind != as99127f && kind != w83781d) {
1037                 if ((err = device_create_file(dev,
1038                                 &sensor_dev_attr_temp1_type.dev_attr))
1039                     || (err = device_create_file(dev,
1040                                 &sensor_dev_attr_temp2_type.dev_attr)))
1041                         return err;
1042                 if (kind != w83783s) {
1043                         if ((err = device_create_file(dev,
1044                                         &sensor_dev_attr_temp3_type.dev_attr)))
1045                                 return err;
1046                 }
1047         }
1048
1049         return 0;
1050 }
1051
1052 /* Return 0 if detection is successful, -ENODEV otherwise */
1053 static int
1054 w83781d_detect(struct i2c_client *client, int kind,
1055                struct i2c_board_info *info)
1056 {
1057         int val1 = 0, val2;
1058         struct w83781d_data *isa = w83781d_data_if_isa();
1059         struct i2c_adapter *adapter = client->adapter;
1060         int address = client->addr;
1061         const char *client_name = "";
1062         enum vendor { winbond, asus } vendid;
1063
1064         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1065                 return -ENODEV;
1066
1067         /* We block updates of the ISA device to minimize the risk of
1068            concurrent access to the same W83781D chip through different
1069            interfaces. */
1070         if (isa)
1071                 mutex_lock(&isa->update_lock);
1072
1073         /* The w8378?d may be stuck in some other bank than bank 0. This may
1074            make reading other information impossible. Specify a force=... or
1075            force_*=... parameter, and the Winbond will be reset to the right
1076            bank. */
1077         if (kind < 0) {
1078                 if (i2c_smbus_read_byte_data
1079                     (client, W83781D_REG_CONFIG) & 0x80) {
1080                         dev_dbg(&adapter->dev, "Detection of w83781d chip "
1081                                 "failed at step 3\n");
1082                         goto err_nodev;
1083                 }
1084                 val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
1085                 val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
1086                 /* Check for Winbond or Asus ID if in bank 0 */
1087                 if ((!(val1 & 0x07)) &&
1088                     (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
1089                      || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
1090                         dev_dbg(&adapter->dev, "Detection of w83781d chip "
1091                                 "failed at step 4\n");
1092                         goto err_nodev;
1093                 }
1094                 /* If Winbond SMBus, check address at 0x48.
1095                    Asus doesn't support, except for as99127f rev.2 */
1096                 if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
1097                     ((val1 & 0x80) && (val2 == 0x5c))) {
1098                         if (i2c_smbus_read_byte_data
1099                             (client, W83781D_REG_I2C_ADDR) != address) {
1100                                 dev_dbg(&adapter->dev, "Detection of w83781d "
1101                                         "chip failed at step 5\n");
1102                                 goto err_nodev;
1103                         }
1104                 }
1105         }
1106
1107         /* We have either had a force parameter, or we have already detected the
1108            Winbond. Put it now into bank 0 and Vendor ID High Byte */
1109         i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1110                 (i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
1111                  & 0x78) | 0x80);
1112
1113         /* Determine the chip type. */
1114         if (kind <= 0) {
1115                 /* get vendor ID */
1116                 val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
1117                 if (val2 == 0x5c)
1118                         vendid = winbond;
1119                 else if (val2 == 0x12)
1120                         vendid = asus;
1121                 else {
1122                         dev_dbg(&adapter->dev, "w83781d chip vendor is "
1123                                 "neither Winbond nor Asus\n");
1124                         goto err_nodev;
1125                 }
1126
1127                 val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
1128                 if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
1129                         kind = w83781d;
1130                 else if (val1 == 0x30 && vendid == winbond)
1131                         kind = w83782d;
1132                 else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
1133                         kind = w83783s;
1134                 else if (val1 == 0x31)
1135                         kind = as99127f;
1136                 else {
1137                         if (kind == 0)
1138                                 dev_warn(&adapter->dev, "Ignoring 'force' "
1139                                          "parameter for unknown chip at "
1140                                          "address 0x%02x\n", address);
1141                         goto err_nodev;
1142                 }
1143
1144                 if ((kind == w83781d || kind == w83782d)
1145                  && w83781d_alias_detect(client, val1)) {
1146                         dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
1147                                 "be the same as ISA device\n", address);
1148                         goto err_nodev;
1149                 }
1150         }
1151
1152         if (isa)
1153                 mutex_unlock(&isa->update_lock);
1154
1155         if (kind == w83781d) {
1156                 client_name = "w83781d";
1157         } else if (kind == w83782d) {
1158                 client_name = "w83782d";
1159         } else if (kind == w83783s) {
1160                 client_name = "w83783s";
1161         } else if (kind == as99127f) {
1162                 client_name = "as99127f";
1163         }
1164
1165         strlcpy(info->type, client_name, I2C_NAME_SIZE);
1166
1167         return 0;
1168
1169  err_nodev:
1170         if (isa)
1171                 mutex_unlock(&isa->update_lock);
1172         return -ENODEV;
1173 }
1174
1175 static int
1176 w83781d_probe(struct i2c_client *client, const struct i2c_device_id *id)
1177 {
1178         struct device *dev = &client->dev;
1179         struct w83781d_data *data;
1180         int err;
1181
1182         data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL);
1183         if (!data) {
1184                 err = -ENOMEM;
1185                 goto ERROR1;
1186         }
1187
1188         i2c_set_clientdata(client, data);
1189         mutex_init(&data->lock);
1190         mutex_init(&data->update_lock);
1191
1192         data->type = id->driver_data;
1193         data->client = client;
1194
1195         /* attach secondary i2c lm75-like clients */
1196         err = w83781d_detect_subclients(client);
1197         if (err)
1198                 goto ERROR3;
1199
1200         /* Initialize the chip */
1201         w83781d_init_device(dev);
1202
1203         /* Register sysfs hooks */
1204         err = w83781d_create_files(dev, data->type, 0);
1205         if (err)
1206                 goto ERROR4;
1207
1208         data->hwmon_dev = hwmon_device_register(dev);
1209         if (IS_ERR(data->hwmon_dev)) {
1210                 err = PTR_ERR(data->hwmon_dev);
1211                 goto ERROR4;
1212         }
1213
1214         return 0;
1215
1216 ERROR4:
1217         sysfs_remove_group(&dev->kobj, &w83781d_group);
1218         sysfs_remove_group(&dev->kobj, &w83781d_group_opt);
1219
1220         if (data->lm75[0])
1221                 i2c_unregister_device(data->lm75[0]);
1222         if (data->lm75[1])
1223                 i2c_unregister_device(data->lm75[1]);
1224 ERROR3:
1225         i2c_set_clientdata(client, NULL);
1226         kfree(data);
1227 ERROR1:
1228         return err;
1229 }
1230
1231 static int
1232 w83781d_remove(struct i2c_client *client)
1233 {
1234         struct w83781d_data *data = i2c_get_clientdata(client);
1235         struct device *dev = &client->dev;
1236
1237         hwmon_device_unregister(data->hwmon_dev);
1238
1239         sysfs_remove_group(&dev->kobj, &w83781d_group);
1240         sysfs_remove_group(&dev->kobj, &w83781d_group_opt);
1241
1242         if (data->lm75[0])
1243                 i2c_unregister_device(data->lm75[0]);
1244         if (data->lm75[1])
1245                 i2c_unregister_device(data->lm75[1]);
1246
1247         i2c_set_clientdata(client, NULL);
1248         kfree(data);
1249
1250         return 0;
1251 }
1252
1253 static int
1254 w83781d_read_value_i2c(struct w83781d_data *data, u16 reg)
1255 {
1256         struct i2c_client *client = data->client;
1257         int res, bank;
1258         struct i2c_client *cl;
1259
1260         bank = (reg >> 8) & 0x0f;
1261         if (bank > 2)
1262                 /* switch banks */
1263                 i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1264                                           bank);
1265         if (bank == 0 || bank > 2) {
1266                 res = i2c_smbus_read_byte_data(client, reg & 0xff);
1267         } else {
1268                 /* switch to subclient */
1269                 cl = data->lm75[bank - 1];
1270                 /* convert from ISA to LM75 I2C addresses */
1271                 switch (reg & 0xff) {
1272                 case 0x50:      /* TEMP */
1273                         res = swab16(i2c_smbus_read_word_data(cl, 0));
1274                         break;
1275                 case 0x52:      /* CONFIG */
1276                         res = i2c_smbus_read_byte_data(cl, 1);
1277                         break;
1278                 case 0x53:      /* HYST */
1279                         res = swab16(i2c_smbus_read_word_data(cl, 2));
1280                         break;
1281                 case 0x55:      /* OVER */
1282                 default:
1283                         res = swab16(i2c_smbus_read_word_data(cl, 3));
1284                         break;
1285                 }
1286         }
1287         if (bank > 2)
1288                 i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1289
1290         return res;
1291 }
1292
1293 static int
1294 w83781d_write_value_i2c(struct w83781d_data *data, u16 reg, u16 value)
1295 {
1296         struct i2c_client *client = data->client;
1297         int bank;
1298         struct i2c_client *cl;
1299
1300         bank = (reg >> 8) & 0x0f;
1301         if (bank > 2)
1302                 /* switch banks */
1303                 i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1304                                           bank);
1305         if (bank == 0 || bank > 2) {
1306                 i2c_smbus_write_byte_data(client, reg & 0xff,
1307                                           value & 0xff);
1308         } else {
1309                 /* switch to subclient */
1310                 cl = data->lm75[bank - 1];
1311                 /* convert from ISA to LM75 I2C addresses */
1312                 switch (reg & 0xff) {
1313                 case 0x52:      /* CONFIG */
1314                         i2c_smbus_write_byte_data(cl, 1, value & 0xff);
1315                         break;
1316                 case 0x53:      /* HYST */
1317                         i2c_smbus_write_word_data(cl, 2, swab16(value));
1318                         break;
1319                 case 0x55:      /* OVER */
1320                         i2c_smbus_write_word_data(cl, 3, swab16(value));
1321                         break;
1322                 }
1323         }
1324         if (bank > 2)
1325                 i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1326
1327         return 0;
1328 }
1329
1330 static void
1331 w83781d_init_device(struct device *dev)
1332 {
1333         struct w83781d_data *data = dev_get_drvdata(dev);
1334         int i, p;
1335         int type = data->type;
1336         u8 tmp;
1337
1338         if (reset && type != as99127f) { /* this resets registers we don't have
1339                                            documentation for on the as99127f */
1340                 /* Resetting the chip has been the default for a long time,
1341                    but it causes the BIOS initializations (fan clock dividers,
1342                    thermal sensor types...) to be lost, so it is now optional.
1343                    It might even go away if nobody reports it as being useful,
1344                    as I see very little reason why this would be needed at
1345                    all. */
1346                 dev_info(dev, "If reset=1 solved a problem you were "
1347                          "having, please report!\n");
1348
1349                 /* save these registers */
1350                 i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1351                 p = w83781d_read_value(data, W83781D_REG_PWMCLK12);
1352                 /* Reset all except Watchdog values and last conversion values
1353                    This sets fan-divs to 2, among others */
1354                 w83781d_write_value(data, W83781D_REG_CONFIG, 0x80);
1355                 /* Restore the registers and disable power-on abnormal beep.
1356                    This saves FAN 1/2/3 input/output values set by BIOS. */
1357                 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1358                 w83781d_write_value(data, W83781D_REG_PWMCLK12, p);
1359                 /* Disable master beep-enable (reset turns it on).
1360                    Individual beep_mask should be reset to off but for some reason
1361                    disabling this bit helps some people not get beeped */
1362                 w83781d_write_value(data, W83781D_REG_BEEP_INTS2, 0);
1363         }
1364
1365         /* Disable power-on abnormal beep, as advised by the datasheet.
1366            Already done if reset=1. */
1367         if (init && !reset && type != as99127f) {
1368                 i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1369                 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1370         }
1371
1372         data->vrm = vid_which_vrm();
1373
1374         if ((type != w83781d) && (type != as99127f)) {
1375                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
1376                 for (i = 1; i <= 3; i++) {
1377                         if (!(tmp & BIT_SCFG1[i - 1])) {
1378                                 data->sens[i - 1] = 4;
1379                         } else {
1380                                 if (w83781d_read_value
1381                                     (data,
1382                                      W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1383                                         data->sens[i - 1] = 1;
1384                                 else
1385                                         data->sens[i - 1] = 2;
1386                         }
1387                         if (type == w83783s && i == 2)
1388                                 break;
1389                 }
1390         }
1391
1392         if (init && type != as99127f) {
1393                 /* Enable temp2 */
1394                 tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
1395                 if (tmp & 0x01) {
1396                         dev_warn(dev, "Enabling temp2, readings "
1397                                  "might not make sense\n");
1398                         w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
1399                                 tmp & 0xfe);
1400                 }
1401
1402                 /* Enable temp3 */
1403                 if (type != w83783s) {
1404                         tmp = w83781d_read_value(data,
1405                                 W83781D_REG_TEMP3_CONFIG);
1406                         if (tmp & 0x01) {
1407                                 dev_warn(dev, "Enabling temp3, "
1408                                          "readings might not make sense\n");
1409                                 w83781d_write_value(data,
1410                                         W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1411                         }
1412                 }
1413         }
1414
1415         /* Start monitoring */
1416         w83781d_write_value(data, W83781D_REG_CONFIG,
1417                             (w83781d_read_value(data,
1418                                                 W83781D_REG_CONFIG) & 0xf7)
1419                             | 0x01);
1420
1421         /* A few vars need to be filled upon startup */
1422         for (i = 0; i < 3; i++) {
1423                 data->fan_min[i] = w83781d_read_value(data,
1424                                         W83781D_REG_FAN_MIN(i));
1425         }
1426
1427         mutex_init(&data->update_lock);
1428 }
1429
1430 static struct w83781d_data *w83781d_update_device(struct device *dev)
1431 {
1432         struct w83781d_data *data = dev_get_drvdata(dev);
1433         struct i2c_client *client = data->client;
1434         int i;
1435
1436         mutex_lock(&data->update_lock);
1437
1438         if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1439             || !data->valid) {
1440                 dev_dbg(dev, "Starting device update\n");
1441
1442                 for (i = 0; i <= 8; i++) {
1443                         if (data->type == w83783s && i == 1)
1444                                 continue;       /* 783S has no in1 */
1445                         data->in[i] =
1446                             w83781d_read_value(data, W83781D_REG_IN(i));
1447                         data->in_min[i] =
1448                             w83781d_read_value(data, W83781D_REG_IN_MIN(i));
1449                         data->in_max[i] =
1450                             w83781d_read_value(data, W83781D_REG_IN_MAX(i));
1451                         if ((data->type != w83782d) && (i == 6))
1452                                 break;
1453                 }
1454                 for (i = 0; i < 3; i++) {
1455                         data->fan[i] =
1456                             w83781d_read_value(data, W83781D_REG_FAN(i));
1457                         data->fan_min[i] =
1458                             w83781d_read_value(data, W83781D_REG_FAN_MIN(i));
1459                 }
1460                 if (data->type != w83781d && data->type != as99127f) {
1461                         for (i = 0; i < 4; i++) {
1462                                 data->pwm[i] =
1463                                     w83781d_read_value(data,
1464                                                        W83781D_REG_PWM[i]);
1465                                 if ((data->type != w83782d || !client->driver)
1466                                     && i == 1)
1467                                         break;
1468                         }
1469                         /* Only PWM2 can be disabled */
1470                         data->pwm2_enable = (w83781d_read_value(data,
1471                                               W83781D_REG_PWMCLK12) & 0x08) >> 3;
1472                 }
1473
1474                 data->temp = w83781d_read_value(data, W83781D_REG_TEMP(1));
1475                 data->temp_max =
1476                     w83781d_read_value(data, W83781D_REG_TEMP_OVER(1));
1477                 data->temp_max_hyst =
1478                     w83781d_read_value(data, W83781D_REG_TEMP_HYST(1));
1479                 data->temp_add[0] =
1480                     w83781d_read_value(data, W83781D_REG_TEMP(2));
1481                 data->temp_max_add[0] =
1482                     w83781d_read_value(data, W83781D_REG_TEMP_OVER(2));
1483                 data->temp_max_hyst_add[0] =
1484                     w83781d_read_value(data, W83781D_REG_TEMP_HYST(2));
1485                 if (data->type != w83783s) {
1486                         data->temp_add[1] =
1487                             w83781d_read_value(data, W83781D_REG_TEMP(3));
1488                         data->temp_max_add[1] =
1489                             w83781d_read_value(data,
1490                                                W83781D_REG_TEMP_OVER(3));
1491                         data->temp_max_hyst_add[1] =
1492                             w83781d_read_value(data,
1493                                                W83781D_REG_TEMP_HYST(3));
1494                 }
1495                 i = w83781d_read_value(data, W83781D_REG_VID_FANDIV);
1496                 data->vid = i & 0x0f;
1497                 data->vid |= (w83781d_read_value(data,
1498                                         W83781D_REG_CHIPID) & 0x01) << 4;
1499                 data->fan_div[0] = (i >> 4) & 0x03;
1500                 data->fan_div[1] = (i >> 6) & 0x03;
1501                 data->fan_div[2] = (w83781d_read_value(data,
1502                                         W83781D_REG_PIN) >> 6) & 0x03;
1503                 if ((data->type != w83781d) && (data->type != as99127f)) {
1504                         i = w83781d_read_value(data, W83781D_REG_VBAT);
1505                         data->fan_div[0] |= (i >> 3) & 0x04;
1506                         data->fan_div[1] |= (i >> 4) & 0x04;
1507                         data->fan_div[2] |= (i >> 5) & 0x04;
1508                 }
1509                 if (data->type == w83782d) {
1510                         data->alarms = w83781d_read_value(data,
1511                                                 W83782D_REG_ALARM1)
1512                                      | (w83781d_read_value(data,
1513                                                 W83782D_REG_ALARM2) << 8)
1514                                      | (w83781d_read_value(data,
1515                                                 W83782D_REG_ALARM3) << 16);
1516                 } else if (data->type == w83783s) {
1517                         data->alarms = w83781d_read_value(data,
1518                                                 W83782D_REG_ALARM1)
1519                                      | (w83781d_read_value(data,
1520                                                 W83782D_REG_ALARM2) << 8);
1521                 } else {
1522                         /* No real-time status registers, fall back to
1523                            interrupt status registers */
1524                         data->alarms = w83781d_read_value(data,
1525                                                 W83781D_REG_ALARM1)
1526                                      | (w83781d_read_value(data,
1527                                                 W83781D_REG_ALARM2) << 8);
1528                 }
1529                 i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
1530                 data->beep_mask = (i << 8) +
1531                     w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
1532                 if ((data->type != w83781d) && (data->type != as99127f)) {
1533                         data->beep_mask |=
1534                             w83781d_read_value(data,
1535                                                W83781D_REG_BEEP_INTS3) << 16;
1536                 }
1537                 data->last_updated = jiffies;
1538                 data->valid = 1;
1539         }
1540
1541         mutex_unlock(&data->update_lock);
1542
1543         return data;
1544 }
1545
1546 static const struct i2c_device_id w83781d_ids[] = {
1547         { "w83781d", w83781d, },
1548         { "w83782d", w83782d, },
1549         { "w83783s", w83783s, },
1550         { "as99127f", as99127f },
1551         { /* LIST END */ }
1552 };
1553 MODULE_DEVICE_TABLE(i2c, w83781d_ids);
1554
1555 static struct i2c_driver w83781d_driver = {
1556         .class          = I2C_CLASS_HWMON,
1557         .driver = {
1558                 .name = "w83781d",
1559         },
1560         .probe          = w83781d_probe,
1561         .remove         = w83781d_remove,
1562         .id_table       = w83781d_ids,
1563         .detect         = w83781d_detect,
1564         .address_data   = &addr_data,
1565 };
1566
1567 /*
1568  * ISA related code
1569  */
1570 #ifdef CONFIG_ISA
1571
1572 /* ISA device, if found */
1573 static struct platform_device *pdev;
1574
1575 static unsigned short isa_address = 0x290;
1576
1577 /* I2C devices get this name attribute automatically, but for ISA devices
1578    we must create it by ourselves. */
1579 static ssize_t
1580 show_name(struct device *dev, struct device_attribute *devattr, char *buf)
1581 {
1582         struct w83781d_data *data = dev_get_drvdata(dev);
1583         return sprintf(buf, "%s\n", data->name);
1584 }
1585 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
1586
1587 static struct w83781d_data *w83781d_data_if_isa(void)
1588 {
1589         return pdev ? platform_get_drvdata(pdev) : NULL;
1590 }
1591
1592 /* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
1593 static int w83781d_alias_detect(struct i2c_client *client, u8 chipid)
1594 {
1595         struct w83781d_data *isa;
1596         int i;
1597
1598         if (!pdev)      /* No ISA chip */
1599                 return 0;
1600
1601         isa = platform_get_drvdata(pdev);
1602
1603         if (w83781d_read_value(isa, W83781D_REG_I2C_ADDR) != client->addr)
1604                 return 0;       /* Address doesn't match */
1605         if (w83781d_read_value(isa, W83781D_REG_WCHIPID) != chipid)
1606                 return 0;       /* Chip type doesn't match */
1607
1608         /* We compare all the limit registers, the config register and the
1609          * interrupt mask registers */
1610         for (i = 0x2b; i <= 0x3d; i++) {
1611                 if (w83781d_read_value(isa, i) !=
1612                     i2c_smbus_read_byte_data(client, i))
1613                         return 0;
1614         }
1615         if (w83781d_read_value(isa, W83781D_REG_CONFIG) !=
1616             i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG))
1617                 return 0;
1618         for (i = 0x43; i <= 0x46; i++) {
1619                 if (w83781d_read_value(isa, i) !=
1620                     i2c_smbus_read_byte_data(client, i))
1621                         return 0;
1622         }
1623
1624         return 1;
1625 }
1626
1627 static int
1628 w83781d_read_value_isa(struct w83781d_data *data, u16 reg)
1629 {
1630         int word_sized, res;
1631
1632         word_sized = (((reg & 0xff00) == 0x100)
1633                       || ((reg & 0xff00) == 0x200))
1634             && (((reg & 0x00ff) == 0x50)
1635                 || ((reg & 0x00ff) == 0x53)
1636                 || ((reg & 0x00ff) == 0x55));
1637         if (reg & 0xff00) {
1638                 outb_p(W83781D_REG_BANK,
1639                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1640                 outb_p(reg >> 8,
1641                        data->isa_addr + W83781D_DATA_REG_OFFSET);
1642         }
1643         outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
1644         res = inb_p(data->isa_addr + W83781D_DATA_REG_OFFSET);
1645         if (word_sized) {
1646                 outb_p((reg & 0xff) + 1,
1647                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1648                 res =
1649                     (res << 8) + inb_p(data->isa_addr +
1650                                        W83781D_DATA_REG_OFFSET);
1651         }
1652         if (reg & 0xff00) {
1653                 outb_p(W83781D_REG_BANK,
1654                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1655                 outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
1656         }
1657         return res;
1658 }
1659
1660 static void
1661 w83781d_write_value_isa(struct w83781d_data *data, u16 reg, u16 value)
1662 {
1663         int word_sized;
1664
1665         word_sized = (((reg & 0xff00) == 0x100)
1666                       || ((reg & 0xff00) == 0x200))
1667             && (((reg & 0x00ff) == 0x53)
1668                 || ((reg & 0x00ff) == 0x55));
1669         if (reg & 0xff00) {
1670                 outb_p(W83781D_REG_BANK,
1671                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1672                 outb_p(reg >> 8,
1673                        data->isa_addr + W83781D_DATA_REG_OFFSET);
1674         }
1675         outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
1676         if (word_sized) {
1677                 outb_p(value >> 8,
1678                        data->isa_addr + W83781D_DATA_REG_OFFSET);
1679                 outb_p((reg & 0xff) + 1,
1680                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1681         }
1682         outb_p(value & 0xff, data->isa_addr + W83781D_DATA_REG_OFFSET);
1683         if (reg & 0xff00) {
1684                 outb_p(W83781D_REG_BANK,
1685                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1686                 outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
1687         }
1688 }
1689
1690 /* The SMBus locks itself, usually, but nothing may access the Winbond between
1691    bank switches. ISA access must always be locked explicitly!
1692    We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
1693    would slow down the W83781D access and should not be necessary.
1694    There are some ugly typecasts here, but the good news is - they should
1695    nowhere else be necessary! */
1696 static int
1697 w83781d_read_value(struct w83781d_data *data, u16 reg)
1698 {
1699         struct i2c_client *client = data->client;
1700         int res;
1701
1702         mutex_lock(&data->lock);
1703         if (client)
1704                 res = w83781d_read_value_i2c(data, reg);
1705         else
1706                 res = w83781d_read_value_isa(data, reg);
1707         mutex_unlock(&data->lock);
1708         return res;
1709 }
1710
1711 static int
1712 w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
1713 {
1714         struct i2c_client *client = data->client;
1715
1716         mutex_lock(&data->lock);
1717         if (client)
1718                 w83781d_write_value_i2c(data, reg, value);
1719         else
1720                 w83781d_write_value_isa(data, reg, value);
1721         mutex_unlock(&data->lock);
1722         return 0;
1723 }
1724
1725 static int __devinit
1726 w83781d_isa_probe(struct platform_device *pdev)
1727 {
1728         int err, reg;
1729         struct w83781d_data *data;
1730         struct resource *res;
1731
1732         /* Reserve the ISA region */
1733         res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1734         if (!request_region(res->start + W83781D_ADDR_REG_OFFSET, 2,
1735                             "w83781d")) {
1736                 err = -EBUSY;
1737                 goto exit;
1738         }
1739
1740         data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL);
1741         if (!data) {
1742                 err = -ENOMEM;
1743                 goto exit_release_region;
1744         }
1745         mutex_init(&data->lock);
1746         data->isa_addr = res->start;
1747         platform_set_drvdata(pdev, data);
1748
1749         reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
1750         switch (reg) {
1751         case 0x30:
1752                 data->type = w83782d;
1753                 data->name = "w83782d";
1754                 break;
1755         default:
1756                 data->type = w83781d;
1757                 data->name = "w83781d";
1758         }
1759
1760         /* Initialize the W83781D chip */
1761         w83781d_init_device(&pdev->dev);
1762
1763         /* Register sysfs hooks */
1764         err = w83781d_create_files(&pdev->dev, data->type, 1);
1765         if (err)
1766                 goto exit_remove_files;
1767
1768         err = device_create_file(&pdev->dev, &dev_attr_name);
1769         if (err)
1770                 goto exit_remove_files;
1771
1772         data->hwmon_dev = hwmon_device_register(&pdev->dev);
1773         if (IS_ERR(data->hwmon_dev)) {
1774                 err = PTR_ERR(data->hwmon_dev);
1775                 goto exit_remove_files;
1776         }
1777
1778         return 0;
1779
1780  exit_remove_files:
1781         sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
1782         sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
1783         device_remove_file(&pdev->dev, &dev_attr_name);
1784         kfree(data);
1785  exit_release_region:
1786         release_region(res->start + W83781D_ADDR_REG_OFFSET, 2);
1787  exit:
1788         return err;
1789 }
1790
1791 static int __devexit
1792 w83781d_isa_remove(struct platform_device *pdev)
1793 {
1794         struct w83781d_data *data = platform_get_drvdata(pdev);
1795
1796         hwmon_device_unregister(data->hwmon_dev);
1797         sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
1798         sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
1799         device_remove_file(&pdev->dev, &dev_attr_name);
1800         release_region(data->isa_addr + W83781D_ADDR_REG_OFFSET, 2);
1801         kfree(data);
1802
1803         return 0;
1804 }
1805
1806 static struct platform_driver w83781d_isa_driver = {
1807         .driver = {
1808                 .owner = THIS_MODULE,
1809                 .name = "w83781d",
1810         },
1811         .probe = w83781d_isa_probe,
1812         .remove = __devexit_p(w83781d_isa_remove),
1813 };
1814
1815 /* return 1 if a supported chip is found, 0 otherwise */
1816 static int __init
1817 w83781d_isa_found(unsigned short address)
1818 {
1819         int val, save, found = 0;
1820
1821         /* We have to request the region in two parts because some
1822            boards declare base+4 to base+7 as a PNP device */
1823         if (!request_region(address, 4, "w83781d")) {
1824                 pr_debug("w83781d: Failed to request low part of region\n");
1825                 return 0;
1826         }
1827         if (!request_region(address + 4, 4, "w83781d")) {
1828                 pr_debug("w83781d: Failed to request high part of region\n");
1829                 release_region(address, 4);
1830                 return 0;
1831         }
1832
1833 #define REALLY_SLOW_IO
1834         /* We need the timeouts for at least some W83781D-like
1835            chips. But only if we read 'undefined' registers. */
1836         val = inb_p(address + 1);
1837         if (inb_p(address + 2) != val
1838          || inb_p(address + 3) != val
1839          || inb_p(address + 7) != val) {
1840                 pr_debug("w83781d: Detection failed at step 1\n");
1841                 goto release;
1842         }
1843 #undef REALLY_SLOW_IO
1844
1845         /* We should be able to change the 7 LSB of the address port. The
1846            MSB (busy flag) should be clear initially, set after the write. */
1847         save = inb_p(address + W83781D_ADDR_REG_OFFSET);
1848         if (save & 0x80) {
1849                 pr_debug("w83781d: Detection failed at step 2\n");
1850                 goto release;
1851         }
1852         val = ~save & 0x7f;
1853         outb_p(val, address + W83781D_ADDR_REG_OFFSET);
1854         if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
1855                 outb_p(save, address + W83781D_ADDR_REG_OFFSET);
1856                 pr_debug("w83781d: Detection failed at step 3\n");
1857                 goto release;
1858         }
1859
1860         /* We found a device, now see if it could be a W83781D */
1861         outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
1862         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1863         if (val & 0x80) {
1864                 pr_debug("w83781d: Detection failed at step 4\n");
1865                 goto release;
1866         }
1867         outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1868         save = inb_p(address + W83781D_DATA_REG_OFFSET);
1869         outb_p(W83781D_REG_CHIPMAN, address + W83781D_ADDR_REG_OFFSET);
1870         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1871         if ((!(save & 0x80) && (val != 0xa3))
1872          || ((save & 0x80) && (val != 0x5c))) {
1873                 pr_debug("w83781d: Detection failed at step 5\n");
1874                 goto release;
1875         }
1876         outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
1877         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1878         if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
1879                 pr_debug("w83781d: Detection failed at step 6\n");
1880                 goto release;
1881         }
1882
1883         /* The busy flag should be clear again */
1884         if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
1885                 pr_debug("w83781d: Detection failed at step 7\n");
1886                 goto release;
1887         }
1888
1889         /* Determine the chip type */
1890         outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1891         save = inb_p(address + W83781D_DATA_REG_OFFSET);
1892         outb_p(save & 0xf8, address + W83781D_DATA_REG_OFFSET);
1893         outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET);
1894         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1895         if ((val & 0xfe) == 0x10        /* W83781D */
1896          || val == 0x30)                /* W83782D */
1897                 found = 1;
1898
1899         if (found)
1900                 pr_info("w83781d: Found a %s chip at %#x\n",
1901                         val == 0x30 ? "W83782D" : "W83781D", (int)address);
1902
1903  release:
1904         release_region(address + 4, 4);
1905         release_region(address, 4);
1906         return found;
1907 }
1908
1909 static int __init
1910 w83781d_isa_device_add(unsigned short address)
1911 {
1912         struct resource res = {
1913                 .start  = address,
1914                 .end    = address + W83781D_EXTENT - 1,
1915                 .name   = "w83781d",
1916                 .flags  = IORESOURCE_IO,
1917         };
1918         int err;
1919
1920         pdev = platform_device_alloc("w83781d", address);
1921         if (!pdev) {
1922                 err = -ENOMEM;
1923                 printk(KERN_ERR "w83781d: Device allocation failed\n");
1924                 goto exit;
1925         }
1926
1927         err = platform_device_add_resources(pdev, &res, 1);
1928         if (err) {
1929                 printk(KERN_ERR "w83781d: Device resource addition failed "
1930                        "(%d)\n", err);
1931                 goto exit_device_put;
1932         }
1933
1934         err = platform_device_add(pdev);
1935         if (err) {
1936                 printk(KERN_ERR "w83781d: Device addition failed (%d)\n",
1937                        err);
1938                 goto exit_device_put;
1939         }
1940
1941         return 0;
1942
1943  exit_device_put:
1944         platform_device_put(pdev);
1945  exit:
1946         pdev = NULL;
1947         return err;
1948 }
1949
1950 static int __init
1951 w83781d_isa_register(void)
1952 {
1953         int res;
1954
1955         if (w83781d_isa_found(isa_address)) {
1956                 res = platform_driver_register(&w83781d_isa_driver);
1957                 if (res)
1958                         goto exit;
1959
1960                 /* Sets global pdev as a side effect */
1961                 res = w83781d_isa_device_add(isa_address);
1962                 if (res)
1963                         goto exit_unreg_isa_driver;
1964         }
1965
1966         return 0;
1967
1968 exit_unreg_isa_driver:
1969         platform_driver_unregister(&w83781d_isa_driver);
1970 exit:
1971         return res;
1972 }
1973
1974 static void
1975 w83781d_isa_unregister(void)
1976 {
1977         if (pdev) {
1978                 platform_device_unregister(pdev);
1979                 platform_driver_unregister(&w83781d_isa_driver);
1980         }
1981 }
1982 #else /* !CONFIG_ISA */
1983
1984 static struct w83781d_data *w83781d_data_if_isa(void)
1985 {
1986         return NULL;
1987 }
1988
1989 static int
1990 w83781d_alias_detect(struct i2c_client *client, u8 chipid)
1991 {
1992         return 0;
1993 }
1994
1995 static int
1996 w83781d_read_value(struct w83781d_data *data, u16 reg)
1997 {
1998         int res;
1999
2000         mutex_lock(&data->lock);
2001         res = w83781d_read_value_i2c(data, reg);
2002         mutex_unlock(&data->lock);
2003
2004         return res;
2005 }
2006
2007 static int
2008 w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
2009 {
2010         mutex_lock(&data->lock);
2011         w83781d_write_value_i2c(data, reg, value);
2012         mutex_unlock(&data->lock);
2013
2014         return 0;
2015 }
2016
2017 static int __init
2018 w83781d_isa_register(void)
2019 {
2020         return 0;
2021 }
2022
2023 static void
2024 w83781d_isa_unregister(void)
2025 {
2026 }
2027 #endif /* CONFIG_ISA */
2028
2029 static int __init
2030 sensors_w83781d_init(void)
2031 {
2032         int res;
2033
2034         /* We register the ISA device first, so that we can skip the
2035          * registration of an I2C interface to the same device. */
2036         res = w83781d_isa_register();
2037         if (res)
2038                 goto exit;
2039
2040         res = i2c_add_driver(&w83781d_driver);
2041         if (res)
2042                 goto exit_unreg_isa;
2043
2044         return 0;
2045
2046  exit_unreg_isa:
2047         w83781d_isa_unregister();
2048  exit:
2049         return res;
2050 }
2051
2052 static void __exit
2053 sensors_w83781d_exit(void)
2054 {
2055         w83781d_isa_unregister();
2056         i2c_del_driver(&w83781d_driver);
2057 }
2058
2059 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
2060               "Philip Edelbrock <phil@netroedge.com>, "
2061               "and Mark Studebaker <mdsxyz123@yahoo.com>");
2062 MODULE_DESCRIPTION("W83781D driver");
2063 MODULE_LICENSE("GPL");
2064
2065 module_init(sensors_w83781d_init);
2066 module_exit(sensors_w83781d_exit);