2 * IDE ATAPI floppy driver.
4 * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
5 * Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net>
6 * Copyright (C) 2005 Bartlomiej Zolnierkiewicz
8 * This driver supports the following IDE floppy drives:
10 * LS-120/240 SuperDisk
12 * Iomega PC Card Clik!/PocketZip
14 * For a historical changelog see
15 * Documentation/ide/ChangeLog.ide-floppy.1996-2002
18 #include <linux/types.h>
19 #include <linux/string.h>
20 #include <linux/kernel.h>
21 #include <linux/delay.h>
22 #include <linux/timer.h>
24 #include <linux/interrupt.h>
25 #include <linux/major.h>
26 #include <linux/errno.h>
27 #include <linux/genhd.h>
28 #include <linux/cdrom.h>
29 #include <linux/ide.h>
30 #include <linux/hdreg.h>
31 #include <linux/bitops.h>
32 #include <linux/mutex.h>
33 #include <linux/scatterlist.h>
35 #include <scsi/scsi_ioctl.h>
37 #include <asm/byteorder.h>
38 #include <linux/irq.h>
39 #include <linux/uaccess.h>
41 #include <asm/unaligned.h>
43 #include "ide-floppy.h"
46 * After each failed packet command we issue a request sense command and retry
47 * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
49 #define IDEFLOPPY_MAX_PC_RETRIES 3
51 /* format capacities descriptor codes */
52 #define CAPACITY_INVALID 0x00
53 #define CAPACITY_UNFORMATTED 0x01
54 #define CAPACITY_CURRENT 0x02
55 #define CAPACITY_NO_CARTRIDGE 0x03
58 * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
59 * was apparently being deasserted before the unit was ready to receive data.
61 #define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */
63 static int ide_floppy_callback(ide_drive_t *drive, int dsc)
65 struct ide_disk_obj *floppy = drive->driver_data;
66 struct ide_atapi_pc *pc = drive->pc;
67 struct request *rq = pc->rq;
68 int uptodate = pc->error ? 0 : 1;
70 ide_debug_log(IDE_DBG_FUNC, "enter");
72 if (drive->failed_pc == pc)
73 drive->failed_pc = NULL;
75 if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
76 (rq && blk_pc_request(rq)))
77 uptodate = 1; /* FIXME */
78 else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
80 u8 *buf = bio_data(rq->bio);
83 floppy->sense_key = buf[2] & 0x0F;
84 floppy->asc = buf[12];
85 floppy->ascq = buf[13];
86 floppy->progress_indication = buf[15] & 0x80 ?
87 (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
90 ide_debug_log(IDE_DBG_PC, "pc = %x",
91 drive->failed_pc->c[0]);
93 ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
94 "ascq = %x", floppy->sense_key,
95 floppy->asc, floppy->ascq);
97 printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
98 "Aborting request!\n");
101 if (blk_special_request(rq))
102 rq->errors = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
107 static void ide_floppy_report_error(struct ide_disk_obj *floppy,
108 struct ide_atapi_pc *pc)
110 /* supress error messages resulting from Medium not present */
111 if (floppy->sense_key == 0x02 &&
112 floppy->asc == 0x3a &&
113 floppy->ascq == 0x00)
116 printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
117 "asc = %2x, ascq = %2x\n",
118 floppy->drive->name, pc->c[0], floppy->sense_key,
119 floppy->asc, floppy->ascq);
123 static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive,
125 struct ide_atapi_pc *pc)
127 struct ide_disk_obj *floppy = drive->driver_data;
129 if (drive->failed_pc == NULL &&
130 pc->c[0] != GPCMD_REQUEST_SENSE)
131 drive->failed_pc = pc;
133 /* Set the current packet command */
136 if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
137 unsigned int done = blk_rq_bytes(drive->hwif->rq);
139 if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
140 ide_floppy_report_error(floppy, pc);
143 pc->error = IDE_DRV_ERROR_GENERAL;
145 drive->failed_pc = NULL;
146 drive->pc_callback(drive, 0);
147 ide_complete_rq(drive, -EIO, done);
151 ide_debug_log(IDE_DBG_FUNC, "retry #%d", pc->retries);
155 return ide_issue_pc(drive, cmd);
158 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
161 pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
167 /* A mode sense command is used to "sense" floppy parameters. */
168 void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
170 u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
173 pc->c[0] = GPCMD_MODE_SENSE_10;
175 pc->c[2] = page_code;
178 case IDEFLOPPY_CAPABILITIES_PAGE:
181 case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
185 printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
187 put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
188 pc->req_xfer = length;
191 static void idefloppy_create_rw_cmd(ide_drive_t *drive,
192 struct ide_atapi_pc *pc, struct request *rq,
193 unsigned long sector)
195 struct ide_disk_obj *floppy = drive->driver_data;
196 int block = sector / floppy->bs_factor;
197 int blocks = blk_rq_sectors(rq) / floppy->bs_factor;
198 int cmd = rq_data_dir(rq);
200 ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks);
203 pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
204 put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
205 put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
207 memcpy(rq->cmd, pc->c, 12);
210 if (rq->cmd_flags & REQ_RW)
211 pc->flags |= PC_FLAG_WRITING;
213 pc->flags |= PC_FLAG_DMA_OK;
216 static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
217 struct ide_atapi_pc *pc, struct request *rq)
220 memcpy(pc->c, rq->cmd, sizeof(pc->c));
222 if (blk_rq_bytes(rq)) {
223 pc->flags |= PC_FLAG_DMA_OK;
224 if (rq_data_dir(rq) == WRITE)
225 pc->flags |= PC_FLAG_WRITING;
229 static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
230 struct request *rq, sector_t block)
232 struct ide_disk_obj *floppy = drive->driver_data;
234 struct ide_atapi_pc *pc;
236 ide_debug_log(IDE_DBG_FUNC, "enter, cmd: 0x%x\n", rq->cmd[0]);
238 if (drive->debug_mask & IDE_DBG_RQ)
239 blk_dump_rq_flags(rq, (rq->rq_disk
240 ? rq->rq_disk->disk_name
243 if (rq->errors >= ERROR_MAX) {
244 if (drive->failed_pc) {
245 ide_floppy_report_error(floppy, drive->failed_pc);
246 drive->failed_pc = NULL;
248 printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
250 if (blk_special_request(rq)) {
252 ide_complete_rq(drive, 0, blk_rq_bytes(rq));
257 if (blk_fs_request(rq)) {
258 if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
259 (blk_rq_sectors(rq) % floppy->bs_factor)) {
260 printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
264 pc = &floppy->queued_pc;
265 idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
266 } else if (blk_special_request(rq) || blk_sense_request(rq)) {
267 pc = (struct ide_atapi_pc *)rq->special;
268 } else if (blk_pc_request(rq)) {
269 pc = &floppy->queued_pc;
270 idefloppy_blockpc_cmd(floppy, pc, rq);
274 ide_prep_sense(drive, rq);
276 memset(&cmd, 0, sizeof(cmd));
279 cmd.tf_flags |= IDE_TFLAG_WRITE;
283 if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
284 ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
285 ide_map_sg(drive, &cmd);
290 return ide_floppy_issue_pc(drive, &cmd, pc);
292 drive->failed_pc = NULL;
293 if (blk_fs_request(rq) == 0 && rq->errors == 0)
295 ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
300 * Look at the flexible disk page parameters. We ignore the CHS capacity
301 * parameters and use the LBA parameters instead.
303 static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
304 struct ide_atapi_pc *pc)
306 struct ide_disk_obj *floppy = drive->driver_data;
307 struct gendisk *disk = floppy->disk;
309 int capacity, lba_capacity;
310 u16 transfer_rate, sector_size, cyls, rpm;
313 ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
315 if (ide_queue_pc_tail(drive, disk, pc, buf, pc->req_xfer)) {
316 printk(KERN_ERR PFX "Can't get flexible disk page params\n");
321 drive->dev_flags |= IDE_DFLAG_WP;
323 drive->dev_flags &= ~IDE_DFLAG_WP;
325 set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
329 transfer_rate = be16_to_cpup((__be16 *)&buf[8 + 2]);
330 sector_size = be16_to_cpup((__be16 *)&buf[8 + 6]);
331 cyls = be16_to_cpup((__be16 *)&buf[8 + 8]);
332 rpm = be16_to_cpup((__be16 *)&buf[8 + 28]);
334 sectors = buf[8 + 5];
336 capacity = cyls * heads * sectors * sector_size;
338 if (memcmp(page, &floppy->flexible_disk_page, 32))
339 printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
340 "%d sector size, %d rpm\n",
341 drive->name, capacity / 1024, cyls, heads,
342 sectors, transfer_rate / 8, sector_size, rpm);
344 memcpy(&floppy->flexible_disk_page, page, 32);
345 drive->bios_cyl = cyls;
346 drive->bios_head = heads;
347 drive->bios_sect = sectors;
348 lba_capacity = floppy->blocks * floppy->block_size;
350 if (capacity < lba_capacity) {
351 printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
352 "bytes, but the drive only handles %d\n",
353 drive->name, lba_capacity, capacity);
354 floppy->blocks = floppy->block_size ?
355 capacity / floppy->block_size : 0;
356 drive->capacity64 = floppy->blocks * floppy->bs_factor;
363 * Determine if a media is present in the floppy drive, and if so, its LBA
366 static int ide_floppy_get_capacity(ide_drive_t *drive)
368 struct ide_disk_obj *floppy = drive->driver_data;
369 struct gendisk *disk = floppy->disk;
370 struct ide_atapi_pc pc;
372 u8 pc_buf[256], header_len, desc_cnt;
373 int i, rc = 1, blocks, length;
375 ide_debug_log(IDE_DBG_FUNC, "enter");
378 drive->bios_head = drive->bios_sect = 0;
380 floppy->bs_factor = 1;
381 drive->capacity64 = 0;
383 ide_floppy_create_read_capacity_cmd(&pc);
384 if (ide_queue_pc_tail(drive, disk, &pc, pc_buf, pc.req_xfer)) {
385 printk(KERN_ERR PFX "Can't get floppy parameters\n");
388 header_len = pc_buf[3];
389 cap_desc = &pc_buf[4];
390 desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
392 for (i = 0; i < desc_cnt; i++) {
393 unsigned int desc_start = 4 + i*8;
395 blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
396 length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
398 ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
400 i, blocks * length / 1024,
406 * the code below is valid only for the 1st descriptor, ie i=0
409 switch (pc_buf[desc_start + 4] & 0x03) {
410 /* Clik! drive returns this instead of CAPACITY_CURRENT */
411 case CAPACITY_UNFORMATTED:
412 if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
414 * If it is not a clik drive, break out
415 * (maintains previous driver behaviour)
418 case CAPACITY_CURRENT:
419 /* Normal Zip/LS-120 disks */
420 if (memcmp(cap_desc, &floppy->cap_desc, 8))
421 printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
423 drive->name, blocks * length / 1024,
425 memcpy(&floppy->cap_desc, cap_desc, 8);
427 if (!length || length % 512) {
428 printk(KERN_NOTICE PFX "%s: %d bytes block size"
429 " not supported\n", drive->name, length);
431 floppy->blocks = blocks;
432 floppy->block_size = length;
433 floppy->bs_factor = length / 512;
434 if (floppy->bs_factor != 1)
435 printk(KERN_NOTICE PFX "%s: Warning: "
436 "non 512 bytes block size not "
440 floppy->blocks * floppy->bs_factor;
444 case CAPACITY_NO_CARTRIDGE:
446 * This is a KERN_ERR so it appears on screen
447 * for the user to see
449 printk(KERN_ERR PFX "%s: No disk in drive\n",
452 case CAPACITY_INVALID:
453 printk(KERN_ERR PFX "%s: Invalid capacity for disk "
454 "in drive\n", drive->name);
457 ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d",
458 pc_buf[desc_start + 4] & 0x03);
461 /* Clik! disk does not support get_flexible_disk_page */
462 if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
463 (void) ide_floppy_get_flexible_disk_page(drive, &pc);
468 static void ide_floppy_setup(ide_drive_t *drive)
470 struct ide_disk_obj *floppy = drive->driver_data;
473 drive->pc_callback = ide_floppy_callback;
476 * We used to check revisions here. At this point however I'm giving up.
477 * Just assume they are all broken, its easier.
479 * The actual reason for the workarounds was likely a driver bug after
480 * all rather than a firmware bug, and the workaround below used to hide
481 * it. It should be fixed as of version 1.9, but to be on the safe side
482 * we'll leave the limitation below for the 2.2.x tree.
484 if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
485 drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
486 /* This value will be visible in the /proc/ide/hdx/settings */
487 drive->pc_delay = IDEFLOPPY_PC_DELAY;
488 blk_queue_max_hw_sectors(drive->queue, 64);
492 * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
493 * nasty clicking noises without it, so please don't remove this.
495 if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) {
496 blk_queue_max_hw_sectors(drive->queue, 64);
497 drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
498 /* IOMEGA Clik! drives do not support lock/unlock commands */
499 drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
502 (void) ide_floppy_get_capacity(drive);
504 ide_proc_register_driver(drive, floppy->driver);
506 drive->dev_flags |= IDE_DFLAG_ATTACH;
509 static void ide_floppy_flush(ide_drive_t *drive)
513 static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk)
517 if (ide_do_test_unit_ready(drive, disk))
518 ide_do_start_stop(drive, disk, 1);
520 ret = ide_floppy_get_capacity(drive);
522 set_capacity(disk, ide_gd_capacity(drive));
527 const struct ide_disk_ops ide_atapi_disk_ops = {
528 .check = ide_check_atapi_device,
529 .get_capacity = ide_floppy_get_capacity,
530 .setup = ide_floppy_setup,
531 .flush = ide_floppy_flush,
532 .init_media = ide_floppy_init_media,
533 .set_doorlock = ide_set_media_lock,
534 .do_request = ide_floppy_do_request,
535 .ioctl = ide_floppy_ioctl,