]> git.karo-electronics.de Git - mv-sheeva.git/blob - drivers/ide/ide-floppy.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
[mv-sheeva.git] / drivers / ide / ide-floppy.c
1 /*
2  * IDE ATAPI floppy driver.
3  *
4  * Copyright (C) 1996-1999  Gadi Oxman <gadio@netvision.net.il>
5  * Copyright (C) 2000-2002  Paul Bristow <paul@paulbristow.net>
6  * Copyright (C) 2005       Bartlomiej Zolnierkiewicz
7  *
8  * This driver supports the following IDE floppy drives:
9  *
10  * LS-120/240 SuperDisk
11  * Iomega Zip 100/250
12  * Iomega PC Card Clik!/PocketZip
13  *
14  * For a historical changelog see
15  * Documentation/ide/ChangeLog.ide-floppy.1996-2002
16  */
17
18 #include <linux/types.h>
19 #include <linux/string.h>
20 #include <linux/kernel.h>
21 #include <linux/delay.h>
22 #include <linux/timer.h>
23 #include <linux/mm.h>
24 #include <linux/interrupt.h>
25 #include <linux/major.h>
26 #include <linux/errno.h>
27 #include <linux/genhd.h>
28 #include <linux/slab.h>
29 #include <linux/cdrom.h>
30 #include <linux/ide.h>
31 #include <linux/hdreg.h>
32 #include <linux/bitops.h>
33 #include <linux/mutex.h>
34 #include <linux/scatterlist.h>
35
36 #include <scsi/scsi_ioctl.h>
37
38 #include <asm/byteorder.h>
39 #include <linux/irq.h>
40 #include <linux/uaccess.h>
41 #include <linux/io.h>
42 #include <asm/unaligned.h>
43
44 #include "ide-floppy.h"
45
46 /*
47  * After each failed packet command we issue a request sense command and retry
48  * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
49  */
50 #define IDEFLOPPY_MAX_PC_RETRIES        3
51
52 /* format capacities descriptor codes */
53 #define CAPACITY_INVALID        0x00
54 #define CAPACITY_UNFORMATTED    0x01
55 #define CAPACITY_CURRENT        0x02
56 #define CAPACITY_NO_CARTRIDGE   0x03
57
58 /*
59  * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
60  * was apparently being deasserted before the unit was ready to receive data.
61  */
62 #define IDEFLOPPY_PC_DELAY      (HZ/20) /* default delay for ZIP 100 (50ms) */
63
64 static int ide_floppy_callback(ide_drive_t *drive, int dsc)
65 {
66         struct ide_disk_obj *floppy = drive->driver_data;
67         struct ide_atapi_pc *pc = drive->pc;
68         struct request *rq = pc->rq;
69         int uptodate = pc->error ? 0 : 1;
70
71         ide_debug_log(IDE_DBG_FUNC, "enter");
72
73         if (drive->failed_pc == pc)
74                 drive->failed_pc = NULL;
75
76         if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
77             (rq && blk_pc_request(rq)))
78                 uptodate = 1; /* FIXME */
79         else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
80
81                 u8 *buf = bio_data(rq->bio);
82
83                 if (!pc->error) {
84                         floppy->sense_key = buf[2] & 0x0F;
85                         floppy->asc = buf[12];
86                         floppy->ascq = buf[13];
87                         floppy->progress_indication = buf[15] & 0x80 ?
88                                 (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
89
90                         if (drive->failed_pc)
91                                 ide_debug_log(IDE_DBG_PC, "pc = %x",
92                                               drive->failed_pc->c[0]);
93
94                         ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
95                                       "ascq = %x", floppy->sense_key,
96                                       floppy->asc, floppy->ascq);
97                 } else
98                         printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
99                                "Aborting request!\n");
100         }
101
102         if (blk_special_request(rq))
103                 rq->errors = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
104
105         return uptodate;
106 }
107
108 static void ide_floppy_report_error(struct ide_disk_obj *floppy,
109                                     struct ide_atapi_pc *pc)
110 {
111         /* supress error messages resulting from Medium not present */
112         if (floppy->sense_key == 0x02 &&
113             floppy->asc       == 0x3a &&
114             floppy->ascq      == 0x00)
115                 return;
116
117         printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
118                         "asc = %2x, ascq = %2x\n",
119                         floppy->drive->name, pc->c[0], floppy->sense_key,
120                         floppy->asc, floppy->ascq);
121
122 }
123
124 static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive,
125                                            struct ide_cmd *cmd,
126                                            struct ide_atapi_pc *pc)
127 {
128         struct ide_disk_obj *floppy = drive->driver_data;
129
130         if (drive->failed_pc == NULL &&
131             pc->c[0] != GPCMD_REQUEST_SENSE)
132                 drive->failed_pc = pc;
133
134         /* Set the current packet command */
135         drive->pc = pc;
136
137         if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
138                 unsigned int done = blk_rq_bytes(drive->hwif->rq);
139
140                 if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
141                         ide_floppy_report_error(floppy, pc);
142
143                 /* Giving up */
144                 pc->error = IDE_DRV_ERROR_GENERAL;
145
146                 drive->failed_pc = NULL;
147                 drive->pc_callback(drive, 0);
148                 ide_complete_rq(drive, -EIO, done);
149                 return ide_stopped;
150         }
151
152         ide_debug_log(IDE_DBG_FUNC, "retry #%d", pc->retries);
153
154         pc->retries++;
155
156         return ide_issue_pc(drive, cmd);
157 }
158
159 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
160 {
161         ide_init_pc(pc);
162         pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
163         pc->c[7] = 255;
164         pc->c[8] = 255;
165         pc->req_xfer = 255;
166 }
167
168 /* A mode sense command is used to "sense" floppy parameters. */
169 void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
170 {
171         u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
172
173         ide_init_pc(pc);
174         pc->c[0] = GPCMD_MODE_SENSE_10;
175         pc->c[1] = 0;
176         pc->c[2] = page_code;
177
178         switch (page_code) {
179         case IDEFLOPPY_CAPABILITIES_PAGE:
180                 length += 12;
181                 break;
182         case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
183                 length += 32;
184                 break;
185         default:
186                 printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
187         }
188         put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
189         pc->req_xfer = length;
190 }
191
192 static void idefloppy_create_rw_cmd(ide_drive_t *drive,
193                                     struct ide_atapi_pc *pc, struct request *rq,
194                                     unsigned long sector)
195 {
196         struct ide_disk_obj *floppy = drive->driver_data;
197         int block = sector / floppy->bs_factor;
198         int blocks = blk_rq_sectors(rq) / floppy->bs_factor;
199         int cmd = rq_data_dir(rq);
200
201         ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks);
202
203         ide_init_pc(pc);
204         pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
205         put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
206         put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
207
208         memcpy(rq->cmd, pc->c, 12);
209
210         pc->rq = rq;
211         if (rq->cmd_flags & REQ_RW)
212                 pc->flags |= PC_FLAG_WRITING;
213
214         pc->flags |= PC_FLAG_DMA_OK;
215 }
216
217 static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
218                 struct ide_atapi_pc *pc, struct request *rq)
219 {
220         ide_init_pc(pc);
221         memcpy(pc->c, rq->cmd, sizeof(pc->c));
222         pc->rq = rq;
223         if (blk_rq_bytes(rq)) {
224                 pc->flags |= PC_FLAG_DMA_OK;
225                 if (rq_data_dir(rq) == WRITE)
226                         pc->flags |= PC_FLAG_WRITING;
227         }
228 }
229
230 static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
231                                              struct request *rq, sector_t block)
232 {
233         struct ide_disk_obj *floppy = drive->driver_data;
234         struct ide_cmd cmd;
235         struct ide_atapi_pc *pc;
236
237         ide_debug_log(IDE_DBG_FUNC, "enter, cmd: 0x%x\n", rq->cmd[0]);
238
239         if (drive->debug_mask & IDE_DBG_RQ)
240                 blk_dump_rq_flags(rq, (rq->rq_disk
241                                         ? rq->rq_disk->disk_name
242                                         : "dev?"));
243
244         if (rq->errors >= ERROR_MAX) {
245                 if (drive->failed_pc) {
246                         ide_floppy_report_error(floppy, drive->failed_pc);
247                         drive->failed_pc = NULL;
248                 } else
249                         printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
250
251                 if (blk_special_request(rq)) {
252                         rq->errors = 0;
253                         ide_complete_rq(drive, 0, blk_rq_bytes(rq));
254                         return ide_stopped;
255                 } else
256                         goto out_end;
257         }
258         if (blk_fs_request(rq)) {
259                 if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
260                     (blk_rq_sectors(rq) % floppy->bs_factor)) {
261                         printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
262                                 drive->name);
263                         goto out_end;
264                 }
265                 pc = &floppy->queued_pc;
266                 idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
267         } else if (blk_special_request(rq) || blk_sense_request(rq)) {
268                 pc = (struct ide_atapi_pc *)rq->special;
269         } else if (blk_pc_request(rq)) {
270                 pc = &floppy->queued_pc;
271                 idefloppy_blockpc_cmd(floppy, pc, rq);
272         } else
273                 BUG();
274
275         ide_prep_sense(drive, rq);
276
277         memset(&cmd, 0, sizeof(cmd));
278
279         if (rq_data_dir(rq))
280                 cmd.tf_flags |= IDE_TFLAG_WRITE;
281
282         cmd.rq = rq;
283
284         if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
285                 ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
286                 ide_map_sg(drive, &cmd);
287         }
288
289         pc->rq = rq;
290
291         return ide_floppy_issue_pc(drive, &cmd, pc);
292 out_end:
293         drive->failed_pc = NULL;
294         if (blk_fs_request(rq) == 0 && rq->errors == 0)
295                 rq->errors = -EIO;
296         ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
297         return ide_stopped;
298 }
299
300 /*
301  * Look at the flexible disk page parameters. We ignore the CHS capacity
302  * parameters and use the LBA parameters instead.
303  */
304 static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
305                                              struct ide_atapi_pc *pc)
306 {
307         struct ide_disk_obj *floppy = drive->driver_data;
308         struct gendisk *disk = floppy->disk;
309         u8 *page, buf[40];
310         int capacity, lba_capacity;
311         u16 transfer_rate, sector_size, cyls, rpm;
312         u8 heads, sectors;
313
314         ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
315
316         if (ide_queue_pc_tail(drive, disk, pc, buf, pc->req_xfer)) {
317                 printk(KERN_ERR PFX "Can't get flexible disk page params\n");
318                 return 1;
319         }
320
321         if (buf[3] & 0x80)
322                 drive->dev_flags |= IDE_DFLAG_WP;
323         else
324                 drive->dev_flags &= ~IDE_DFLAG_WP;
325
326         set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
327
328         page = &buf[8];
329
330         transfer_rate = be16_to_cpup((__be16 *)&buf[8 + 2]);
331         sector_size   = be16_to_cpup((__be16 *)&buf[8 + 6]);
332         cyls          = be16_to_cpup((__be16 *)&buf[8 + 8]);
333         rpm           = be16_to_cpup((__be16 *)&buf[8 + 28]);
334         heads         = buf[8 + 4];
335         sectors       = buf[8 + 5];
336
337         capacity = cyls * heads * sectors * sector_size;
338
339         if (memcmp(page, &floppy->flexible_disk_page, 32))
340                 printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
341                                 "%d sector size, %d rpm\n",
342                                 drive->name, capacity / 1024, cyls, heads,
343                                 sectors, transfer_rate / 8, sector_size, rpm);
344
345         memcpy(&floppy->flexible_disk_page, page, 32);
346         drive->bios_cyl = cyls;
347         drive->bios_head = heads;
348         drive->bios_sect = sectors;
349         lba_capacity = floppy->blocks * floppy->block_size;
350
351         if (capacity < lba_capacity) {
352                 printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
353                         "bytes, but the drive only handles %d\n",
354                         drive->name, lba_capacity, capacity);
355                 floppy->blocks = floppy->block_size ?
356                         capacity / floppy->block_size : 0;
357                 drive->capacity64 = floppy->blocks * floppy->bs_factor;
358         }
359
360         return 0;
361 }
362
363 /*
364  * Determine if a media is present in the floppy drive, and if so, its LBA
365  * capacity.
366  */
367 static int ide_floppy_get_capacity(ide_drive_t *drive)
368 {
369         struct ide_disk_obj *floppy = drive->driver_data;
370         struct gendisk *disk = floppy->disk;
371         struct ide_atapi_pc pc;
372         u8 *cap_desc;
373         u8 pc_buf[256], header_len, desc_cnt;
374         int i, rc = 1, blocks, length;
375
376         ide_debug_log(IDE_DBG_FUNC, "enter");
377
378         drive->bios_cyl = 0;
379         drive->bios_head = drive->bios_sect = 0;
380         floppy->blocks = 0;
381         floppy->bs_factor = 1;
382         drive->capacity64 = 0;
383
384         ide_floppy_create_read_capacity_cmd(&pc);
385         if (ide_queue_pc_tail(drive, disk, &pc, pc_buf, pc.req_xfer)) {
386                 printk(KERN_ERR PFX "Can't get floppy parameters\n");
387                 return 1;
388         }
389         header_len = pc_buf[3];
390         cap_desc = &pc_buf[4];
391         desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
392
393         for (i = 0; i < desc_cnt; i++) {
394                 unsigned int desc_start = 4 + i*8;
395
396                 blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
397                 length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
398
399                 ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
400                                              "%d sector size",
401                                              i, blocks * length / 1024,
402                                              blocks, length);
403
404                 if (i)
405                         continue;
406                 /*
407                  * the code below is valid only for the 1st descriptor, ie i=0
408                  */
409
410                 switch (pc_buf[desc_start + 4] & 0x03) {
411                 /* Clik! drive returns this instead of CAPACITY_CURRENT */
412                 case CAPACITY_UNFORMATTED:
413                         if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
414                                 /*
415                                  * If it is not a clik drive, break out
416                                  * (maintains previous driver behaviour)
417                                  */
418                                 break;
419                 case CAPACITY_CURRENT:
420                         /* Normal Zip/LS-120 disks */
421                         if (memcmp(cap_desc, &floppy->cap_desc, 8))
422                                 printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
423                                        "sector size\n",
424                                        drive->name, blocks * length / 1024,
425                                        blocks, length);
426                         memcpy(&floppy->cap_desc, cap_desc, 8);
427
428                         if (!length || length % 512) {
429                                 printk(KERN_NOTICE PFX "%s: %d bytes block size"
430                                        " not supported\n", drive->name, length);
431                         } else {
432                                 floppy->blocks = blocks;
433                                 floppy->block_size = length;
434                                 floppy->bs_factor = length / 512;
435                                 if (floppy->bs_factor != 1)
436                                         printk(KERN_NOTICE PFX "%s: Warning: "
437                                                "non 512 bytes block size not "
438                                                "fully supported\n",
439                                                drive->name);
440                                 drive->capacity64 =
441                                         floppy->blocks * floppy->bs_factor;
442                                 rc = 0;
443                         }
444                         break;
445                 case CAPACITY_NO_CARTRIDGE:
446                         /*
447                          * This is a KERN_ERR so it appears on screen
448                          * for the user to see
449                          */
450                         printk(KERN_ERR PFX "%s: No disk in drive\n",
451                                drive->name);
452                         break;
453                 case CAPACITY_INVALID:
454                         printk(KERN_ERR PFX "%s: Invalid capacity for disk "
455                                 "in drive\n", drive->name);
456                         break;
457                 }
458                 ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d",
459                                              pc_buf[desc_start + 4] & 0x03);
460         }
461
462         /* Clik! disk does not support get_flexible_disk_page */
463         if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
464                 (void) ide_floppy_get_flexible_disk_page(drive, &pc);
465
466         return rc;
467 }
468
469 static void ide_floppy_setup(ide_drive_t *drive)
470 {
471         struct ide_disk_obj *floppy = drive->driver_data;
472         u16 *id = drive->id;
473
474         drive->pc_callback       = ide_floppy_callback;
475
476         /*
477          * We used to check revisions here. At this point however I'm giving up.
478          * Just assume they are all broken, its easier.
479          *
480          * The actual reason for the workarounds was likely a driver bug after
481          * all rather than a firmware bug, and the workaround below used to hide
482          * it. It should be fixed as of version 1.9, but to be on the safe side
483          * we'll leave the limitation below for the 2.2.x tree.
484          */
485         if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
486                 drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
487                 /* This value will be visible in the /proc/ide/hdx/settings */
488                 drive->pc_delay = IDEFLOPPY_PC_DELAY;
489                 blk_queue_max_hw_sectors(drive->queue, 64);
490         }
491
492         /*
493          * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
494          * nasty clicking noises without it, so please don't remove this.
495          */
496         if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) {
497                 blk_queue_max_hw_sectors(drive->queue, 64);
498                 drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
499                 /* IOMEGA Clik! drives do not support lock/unlock commands */
500                 drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
501         }
502
503         (void) ide_floppy_get_capacity(drive);
504
505         ide_proc_register_driver(drive, floppy->driver);
506
507         drive->dev_flags |= IDE_DFLAG_ATTACH;
508 }
509
510 static void ide_floppy_flush(ide_drive_t *drive)
511 {
512 }
513
514 static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk)
515 {
516         int ret = 0;
517
518         if (ide_do_test_unit_ready(drive, disk))
519                 ide_do_start_stop(drive, disk, 1);
520
521         ret = ide_floppy_get_capacity(drive);
522
523         set_capacity(disk, ide_gd_capacity(drive));
524
525         return ret;
526 }
527
528 const struct ide_disk_ops ide_atapi_disk_ops = {
529         .check          = ide_check_atapi_device,
530         .get_capacity   = ide_floppy_get_capacity,
531         .setup          = ide_floppy_setup,
532         .flush          = ide_floppy_flush,
533         .init_media     = ide_floppy_init_media,
534         .set_doorlock   = ide_set_media_lock,
535         .do_request     = ide_floppy_do_request,
536         .ioctl          = ide_floppy_ioctl,
537 };