]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/ide/sgiioc4.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
[karo-tx-linux.git] / drivers / ide / sgiioc4.c
1 /*
2  * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
3  * Copyright (C) 2008-2009 MontaVista Software, Inc.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License
7  * as published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it would be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
12  *
13  * You should have received a copy of the GNU General Public
14  * License along with this program; if not, write the Free Software
15  * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
16  *
17  * For further information regarding this notice, see:
18  *
19  * http://oss.sgi.com/projects/GenInfo/NoticeExplan
20  */
21
22 #include <linux/module.h>
23 #include <linux/types.h>
24 #include <linux/pci.h>
25 #include <linux/delay.h>
26 #include <linux/init.h>
27 #include <linux/kernel.h>
28 #include <linux/ioport.h>
29 #include <linux/blkdev.h>
30 #include <linux/scatterlist.h>
31 #include <linux/ioc4.h>
32 #include <linux/io.h>
33 #include <linux/ide.h>
34
35 #define DRV_NAME "SGIIOC4"
36
37 /* IOC4 Specific Definitions */
38 #define IOC4_CMD_OFFSET         0x100
39 #define IOC4_CTRL_OFFSET        0x120
40 #define IOC4_DMA_OFFSET         0x140
41 #define IOC4_INTR_OFFSET        0x0
42
43 #define IOC4_TIMING             0x00
44 #define IOC4_DMA_PTR_L          0x01
45 #define IOC4_DMA_PTR_H          0x02
46 #define IOC4_DMA_ADDR_L         0x03
47 #define IOC4_DMA_ADDR_H         0x04
48 #define IOC4_BC_DEV             0x05
49 #define IOC4_BC_MEM             0x06
50 #define IOC4_DMA_CTRL           0x07
51 #define IOC4_DMA_END_ADDR       0x08
52
53 /* Bits in the IOC4 Control/Status Register */
54 #define IOC4_S_DMA_START        0x01
55 #define IOC4_S_DMA_STOP         0x02
56 #define IOC4_S_DMA_DIR          0x04
57 #define IOC4_S_DMA_ACTIVE       0x08
58 #define IOC4_S_DMA_ERROR        0x10
59 #define IOC4_ATA_MEMERR         0x02
60
61 /* Read/Write Directions */
62 #define IOC4_DMA_WRITE          0x04
63 #define IOC4_DMA_READ           0x00
64
65 /* Interrupt Register Offsets */
66 #define IOC4_INTR_REG           0x03
67 #define IOC4_INTR_SET           0x05
68 #define IOC4_INTR_CLEAR         0x07
69
70 #define IOC4_IDE_CACHELINE_SIZE 128
71 #define IOC4_CMD_CTL_BLK_SIZE   0x20
72 #define IOC4_SUPPORTED_FIRMWARE_REV 46
73
74 struct ioc4_dma_regs {
75         u32 timing_reg0;
76         u32 timing_reg1;
77         u32 low_mem_ptr;
78         u32 high_mem_ptr;
79         u32 low_mem_addr;
80         u32 high_mem_addr;
81         u32 dev_byte_count;
82         u32 mem_byte_count;
83         u32 status;
84 };
85
86 /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
87 /* IOC4 has only 1 IDE channel */
88 #define IOC4_PRD_BYTES          16
89 #define IOC4_PRD_ENTRIES        (PAGE_SIZE / (4 * IOC4_PRD_BYTES))
90
91
92 static void sgiioc4_init_hwif_ports(struct ide_hw *hw,
93                                     unsigned long data_port,
94                                     unsigned long ctrl_port,
95                                     unsigned long irq_port)
96 {
97         unsigned long reg = data_port;
98         int i;
99
100         /* Registers are word (32 bit) aligned */
101         for (i = 0; i <= 7; i++)
102                 hw->io_ports_array[i] = reg + i * 4;
103
104         hw->io_ports.ctl_addr = ctrl_port;
105         hw->io_ports.irq_addr = irq_port;
106 }
107
108 static int sgiioc4_checkirq(ide_hwif_t *hwif)
109 {
110         unsigned long intr_addr = hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
111
112         if (readl((void __iomem *)intr_addr) & 0x03)
113                 return 1;
114
115         return 0;
116 }
117
118 static u8 sgiioc4_read_status(ide_hwif_t *);
119
120 static int sgiioc4_clearirq(ide_drive_t *drive)
121 {
122         u32 intr_reg;
123         ide_hwif_t *hwif = drive->hwif;
124         struct ide_io_ports *io_ports = &hwif->io_ports;
125         unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2);
126
127         /* Code to check for PCI error conditions */
128         intr_reg = readl((void __iomem *)other_ir);
129         if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
130                 /*
131                  * Using sgiioc4_read_status to read the Status register has a
132                  * side effect of clearing the interrupt.  The first read should
133                  * clear it if it is set.  The second read should return
134                  * a "clear" status if it got cleared.  If not, then spin
135                  * for a bit trying to clear it.
136                  */
137                 u8 stat = sgiioc4_read_status(hwif);
138                 int count = 0;
139
140                 stat = sgiioc4_read_status(hwif);
141                 while ((stat & ATA_BUSY) && (count++ < 100)) {
142                         udelay(1);
143                         stat = sgiioc4_read_status(hwif);
144                 }
145
146                 if (intr_reg & 0x02) {
147                         struct pci_dev *dev = to_pci_dev(hwif->dev);
148                         /* Error when transferring DMA data on PCI bus */
149                         u32 pci_err_addr_low, pci_err_addr_high,
150                             pci_stat_cmd_reg;
151
152                         pci_err_addr_low =
153                                 readl((void __iomem *)io_ports->irq_addr);
154                         pci_err_addr_high =
155                                 readl((void __iomem *)(io_ports->irq_addr + 4));
156                         pci_read_config_dword(dev, PCI_COMMAND,
157                                               &pci_stat_cmd_reg);
158                         printk(KERN_ERR "%s(%s): PCI Bus Error when doing DMA: "
159                                "status-cmd reg is 0x%x\n",
160                                __func__, drive->name, pci_stat_cmd_reg);
161                         printk(KERN_ERR "%s(%s): PCI Error Address is 0x%x%x\n",
162                                __func__, drive->name,
163                                pci_err_addr_high, pci_err_addr_low);
164                         /* Clear the PCI Error indicator */
165                         pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
166                 }
167
168                 /* Clear the Interrupt, Error bits on the IOC4 */
169                 writel(0x03, (void __iomem *)other_ir);
170
171                 intr_reg = readl((void __iomem *)other_ir);
172         }
173
174         return intr_reg & 3;
175 }
176
177 static void sgiioc4_dma_start(ide_drive_t *drive)
178 {
179         ide_hwif_t *hwif = drive->hwif;
180         unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
181         unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
182         unsigned int temp_reg = reg | IOC4_S_DMA_START;
183
184         writel(temp_reg, (void __iomem *)ioc4_dma_addr);
185 }
186
187 static u32 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
188 {
189         unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
190         u32     ioc4_dma;
191         int     count;
192
193         count = 0;
194         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
195         while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
196                 udelay(1);
197                 ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
198         }
199         return ioc4_dma;
200 }
201
202 /* Stops the IOC4 DMA Engine */
203 static int sgiioc4_dma_end(ide_drive_t *drive)
204 {
205         u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
206         ide_hwif_t *hwif = drive->hwif;
207         unsigned long dma_base = hwif->dma_base;
208         int dma_stat = 0;
209         unsigned long *ending_dma = ide_get_hwifdata(hwif);
210
211         writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
212
213         ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
214
215         if (ioc4_dma & IOC4_S_DMA_STOP) {
216                 printk(KERN_ERR
217                        "%s(%s): IOC4 DMA STOP bit is still 1 :"
218                        "ioc4_dma_reg 0x%x\n",
219                        __func__, drive->name, ioc4_dma);
220                 dma_stat = 1;
221         }
222
223         /*
224          * The IOC4 will DMA 1's to the ending DMA area to indicate that
225          * previous data DMA is complete.  This is necessary because of relaxed
226          * ordering between register reads and DMA writes on the Altix.
227          */
228         while ((cnt++ < 200) && (!valid)) {
229                 for (num = 0; num < 16; num++) {
230                         if (ending_dma[num]) {
231                                 valid = 1;
232                                 break;
233                         }
234                 }
235                 udelay(1);
236         }
237         if (!valid) {
238                 printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__,
239                        drive->name);
240                 dma_stat = 1;
241         }
242
243         bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
244         bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
245
246         if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
247                 if (bc_dev > bc_mem + 8) {
248                         printk(KERN_ERR
249                                "%s(%s): WARNING!! byte_count_dev %d "
250                                "!= byte_count_mem %d\n",
251                                __func__, drive->name, bc_dev, bc_mem);
252                 }
253         }
254
255         return dma_stat;
256 }
257
258 static void sgiioc4_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
259 {
260 }
261
262 /* Returns 1 if DMA IRQ issued, 0 otherwise */
263 static int sgiioc4_dma_test_irq(ide_drive_t *drive)
264 {
265         return sgiioc4_checkirq(drive->hwif);
266 }
267
268 static void sgiioc4_dma_host_set(ide_drive_t *drive, int on)
269 {
270         if (!on)
271                 sgiioc4_clearirq(drive);
272 }
273
274 static void sgiioc4_resetproc(ide_drive_t *drive)
275 {
276         struct ide_cmd *cmd = &drive->hwif->cmd;
277
278         sgiioc4_dma_end(drive);
279         ide_dma_unmap_sg(drive, cmd);
280         sgiioc4_clearirq(drive);
281 }
282
283 static void sgiioc4_dma_lost_irq(ide_drive_t *drive)
284 {
285         sgiioc4_resetproc(drive);
286
287         ide_dma_lost_irq(drive);
288 }
289
290 static u8 sgiioc4_read_status(ide_hwif_t *hwif)
291 {
292         unsigned long port = hwif->io_ports.status_addr;
293         u8 reg = (u8) readb((void __iomem *) port);
294
295         if (!(reg & ATA_BUSY)) {        /* Not busy... check for interrupt */
296                 unsigned long other_ir = port - 0x110;
297                 unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
298
299                 /* Clear the Interrupt, Error bits on the IOC4 */
300                 if (intr_reg & 0x03) {
301                         writel(0x03, (void __iomem *) other_ir);
302                         intr_reg = (u32) readl((void __iomem *) other_ir);
303                 }
304         }
305
306         return reg;
307 }
308
309 /* Creates a DMA map for the scatter-gather list entries */
310 static int __devinit ide_dma_sgiioc4(ide_hwif_t *hwif,
311                                      const struct ide_port_info *d)
312 {
313         struct pci_dev *dev = to_pci_dev(hwif->dev);
314         unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
315         int num_ports = sizeof(struct ioc4_dma_regs);
316         void *pad;
317
318         printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
319
320         if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
321                 printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
322                        "already in use\n", __func__, hwif->name,
323                        dma_base, dma_base + num_ports - 1);
324                 return -1;
325         }
326
327         hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
328                          IOC4_DMA_OFFSET;
329
330         hwif->sg_max_nents = IOC4_PRD_ENTRIES;
331
332         hwif->prd_max_nents = IOC4_PRD_ENTRIES;
333         hwif->prd_ent_size = IOC4_PRD_BYTES;
334
335         if (ide_allocate_dma_engine(hwif))
336                 goto dma_pci_alloc_failure;
337
338         pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
339                                    (dma_addr_t *)&hwif->extra_base);
340         if (pad) {
341                 ide_set_hwifdata(hwif, pad);
342                 return 0;
343         }
344
345         ide_release_dma_engine(hwif);
346
347         printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
348                __func__, hwif->name);
349         printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
350
351 dma_pci_alloc_failure:
352         release_mem_region(dma_base, num_ports);
353
354         return -1;
355 }
356
357 /* Initializes the IOC4 DMA Engine */
358 static void sgiioc4_configure_for_dma(int dma_direction, ide_drive_t *drive)
359 {
360         u32 ioc4_dma;
361         ide_hwif_t *hwif = drive->hwif;
362         unsigned long dma_base = hwif->dma_base;
363         unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
364         u32 dma_addr, ending_dma_addr;
365
366         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
367
368         if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
369                 printk(KERN_WARNING "%s(%s): Warning!! DMA from previous "
370                        "transfer was still active\n", __func__, drive->name);
371                 writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
372                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
373
374                 if (ioc4_dma & IOC4_S_DMA_STOP)
375                         printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
376                                "still 1\n", __func__, drive->name);
377         }
378
379         ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
380         if (ioc4_dma & IOC4_S_DMA_ERROR) {
381                 printk(KERN_WARNING "%s(%s): Warning!! DMA Error during "
382                        "previous transfer, status 0x%x\n",
383                        __func__, drive->name, ioc4_dma);
384                 writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
385                 ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
386
387                 if (ioc4_dma & IOC4_S_DMA_STOP)
388                         printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
389                                "still 1\n", __func__, drive->name);
390         }
391
392         /* Address of the Scatter Gather List */
393         dma_addr = cpu_to_le32(hwif->dmatable_dma);
394         writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
395
396         /* Address of the Ending DMA */
397         memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
398         ending_dma_addr = cpu_to_le32(hwif->extra_base);
399         writel(ending_dma_addr, (void __iomem *)(dma_base +
400                                                  IOC4_DMA_END_ADDR * 4));
401
402         writel(dma_direction, (void __iomem *)ioc4_dma_addr);
403 }
404
405 /* IOC4 Scatter Gather list Format                                       */
406 /* 128 Bit entries to support 64 bit addresses in the future             */
407 /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format      */
408 /* --------------------------------------------------------------------- */
409 /* | Upper 32 bits - Zero           |           Lower 32 bits- address | */
410 /* --------------------------------------------------------------------- */
411 /* | Upper 32 bits - Zero           |EOL| 15 unused     | 16 Bit Length| */
412 /* --------------------------------------------------------------------- */
413 /* Creates the scatter gather list, DMA Table                            */
414
415 static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
416 {
417         ide_hwif_t *hwif = drive->hwif;
418         unsigned int *table = hwif->dmatable_cpu;
419         unsigned int count = 0, i = cmd->sg_nents;
420         struct scatterlist *sg = hwif->sg_table;
421
422         while (i && sg_dma_len(sg)) {
423                 dma_addr_t cur_addr;
424                 int cur_len;
425                 cur_addr = sg_dma_address(sg);
426                 cur_len = sg_dma_len(sg);
427
428                 while (cur_len) {
429                         if (count++ >= IOC4_PRD_ENTRIES) {
430                                 printk(KERN_WARNING
431                                        "%s: DMA table too small\n",
432                                        drive->name);
433                                 return 0;
434                         } else {
435                                 u32 bcount =
436                                     0x10000 - (cur_addr & 0xffff);
437
438                                 if (bcount > cur_len)
439                                         bcount = cur_len;
440
441                                 /*
442                                  * Put the address, length in
443                                  * the IOC4 dma-table format
444                                  */
445                                 *table = 0x0;
446                                 table++;
447                                 *table = cpu_to_be32(cur_addr);
448                                 table++;
449                                 *table = 0x0;
450                                 table++;
451
452                                 *table = cpu_to_be32(bcount);
453                                 table++;
454
455                                 cur_addr += bcount;
456                                 cur_len -= bcount;
457                         }
458                 }
459
460                 sg = sg_next(sg);
461                 i--;
462         }
463
464         if (count) {
465                 table--;
466                 *table |= cpu_to_be32(0x80000000);
467                 return count;
468         }
469
470         return 0;               /* revert to PIO for this request */
471 }
472
473 static int sgiioc4_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
474 {
475         int ddir;
476         u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
477
478         if (sgiioc4_build_dmatable(drive, cmd) == 0)
479                 /* try PIO instead of DMA */
480                 return 1;
481
482         if (write)
483                 /* Writes TO the IOC4 FROM Main Memory */
484                 ddir = IOC4_DMA_READ;
485         else
486                 /* Writes FROM the IOC4 TO Main Memory */
487                 ddir = IOC4_DMA_WRITE;
488
489         sgiioc4_configure_for_dma(ddir, drive);
490
491         return 0;
492 }
493
494 static const struct ide_tp_ops sgiioc4_tp_ops = {
495         .exec_command           = ide_exec_command,
496         .read_status            = sgiioc4_read_status,
497         .read_altstatus         = ide_read_altstatus,
498         .write_devctl           = ide_write_devctl,
499
500         .dev_select             = ide_dev_select,
501         .tf_load                = ide_tf_load,
502         .tf_read                = ide_tf_read,
503
504         .input_data             = ide_input_data,
505         .output_data            = ide_output_data,
506 };
507
508 static const struct ide_port_ops sgiioc4_port_ops = {
509         .set_dma_mode           = sgiioc4_set_dma_mode,
510         /* reset DMA engine, clear IRQs */
511         .resetproc              = sgiioc4_resetproc,
512 };
513
514 static const struct ide_dma_ops sgiioc4_dma_ops = {
515         .dma_host_set           = sgiioc4_dma_host_set,
516         .dma_setup              = sgiioc4_dma_setup,
517         .dma_start              = sgiioc4_dma_start,
518         .dma_end                = sgiioc4_dma_end,
519         .dma_test_irq           = sgiioc4_dma_test_irq,
520         .dma_lost_irq           = sgiioc4_dma_lost_irq,
521 };
522
523 static const struct ide_port_info sgiioc4_port_info __devinitconst = {
524         .name                   = DRV_NAME,
525         .chipset                = ide_pci,
526         .init_dma               = ide_dma_sgiioc4,
527         .tp_ops                 = &sgiioc4_tp_ops,
528         .port_ops               = &sgiioc4_port_ops,
529         .dma_ops                = &sgiioc4_dma_ops,
530         .host_flags             = IDE_HFLAG_MMIO,
531         .irq_flags              = IRQF_SHARED,
532         .mwdma_mask             = ATA_MWDMA2_ONLY,
533 };
534
535 static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
536 {
537         unsigned long cmd_base, irqport;
538         unsigned long bar0, cmd_phys_base, ctl;
539         void __iomem *virt_base;
540         struct ide_hw hw, *hws[] = { &hw };
541         int rc;
542
543         /* Get the CmdBlk and CtrlBlk base registers */
544         bar0 = pci_resource_start(dev, 0);
545         virt_base = pci_ioremap_bar(dev, 0);
546         if (virt_base == NULL) {
547                 printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
548                                 DRV_NAME, bar0);
549                 return -ENOMEM;
550         }
551         cmd_base = (unsigned long)virt_base + IOC4_CMD_OFFSET;
552         ctl = (unsigned long)virt_base + IOC4_CTRL_OFFSET;
553         irqport = (unsigned long)virt_base + IOC4_INTR_OFFSET;
554
555         cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
556         if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
557                                DRV_NAME) == NULL) {
558                 printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
559                        "already in use\n", DRV_NAME, pci_name(dev),
560                        cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
561                 rc = -EBUSY;
562                 goto req_mem_rgn_err;
563         }
564
565         /* Initialize the IO registers */
566         memset(&hw, 0, sizeof(hw));
567         sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
568         hw.irq = dev->irq;
569         hw.dev = &dev->dev;
570
571         /* Initialize chipset IRQ registers */
572         writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
573
574         rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
575         if (!rc)
576                 return 0;
577
578         release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
579 req_mem_rgn_err:
580         iounmap(virt_base);
581         return rc;
582 }
583
584 static unsigned int __devinit pci_init_sgiioc4(struct pci_dev *dev)
585 {
586         int ret;
587
588         printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
589                          DRV_NAME, pci_name(dev), dev->revision);
590
591         if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) {
592                 printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
593                                 "firmware is obsolete - please upgrade to "
594                                 "revision46 or higher\n",
595                                 DRV_NAME, pci_name(dev));
596                 ret = -EAGAIN;
597                 goto out;
598         }
599         ret = sgiioc4_ide_setup_pci_device(dev);
600 out:
601         return ret;
602 }
603
604 int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd)
605 {
606         /*
607          * PCI-RT does not bring out IDE connection.
608          * Do not attach to this particular IOC4.
609          */
610         if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
611                 return 0;
612
613         return pci_init_sgiioc4(idd->idd_pdev);
614 }
615
616 static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
617         .is_name = "IOC4_ide",
618         .is_owner = THIS_MODULE,
619         .is_probe = ioc4_ide_attach_one,
620 };
621
622 static int __init ioc4_ide_init(void)
623 {
624         return ioc4_register_submodule(&ioc4_ide_submodule);
625 }
626
627 late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
628
629 MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
630 MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
631 MODULE_LICENSE("GPL");