4 # When adding new entries keep the list in alphabetical order
9 tristate "ACPI Ambient Light Sensor"
12 select IIO_TRIGGERED_BUFFER
15 Say Y here if you want to build a driver for the ACPI0008
18 To compile this driver as a module, choose M here: the module will
22 tristate "ADJD-S311-CR999 digital color sensor"
24 select IIO_TRIGGERED_BUFFER
27 If you say yes here you get support for the Avago ADJD-S311-CR999
28 digital color light sensor.
30 This driver can also be built as a module. If so, the module
31 will be called adjd_s311.
34 tristate "AL3320A ambient light sensor"
37 Say Y here if you want to build a driver for the Dyna Image AL3320A
40 To compile this driver as a module, choose M here: the
41 module will be called al3320a.
44 tristate "APDS9300 ambient light sensor"
47 Say Y here if you want to build a driver for the Avago APDS9300
50 To compile this driver as a module, choose M here: the
51 module will be called apds9300.
54 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
60 Say Y here to build I2C interface support for the Avago
61 APDS9960 gesture/RGB/ALS/proximity sensor.
63 To compile this driver as a module, choose M here: the
64 module will be called apds9960
67 tristate "ROHM BH1750 ambient light sensor"
70 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
71 BH1750, BH1751 ambient light sensors.
73 To compile this driver as a module, choose M here: the module will
77 tristate "ROHM BH1780 ambient light sensor"
80 Say Y here to build support for the ROHM BH1780GLI ambient
83 To compile this driver as a module, choose M here: the module will
88 tristate "CM32181 driver"
90 Say Y here if you use cm32181.
91 This option enables ambient light sensor using
92 Capella cm32181 device driver.
94 To compile this driver as a module, choose M here:
95 the module will be called cm32181.
99 tristate "CM3232 ambient light sensor"
101 Say Y here if you use cm3232.
102 This option enables ambient light sensor using
103 Capella Microsystems cm3232 device driver.
105 To compile this driver as a module, choose M here:
106 the module will be called cm3232.
110 tristate "Capella CM3323 color light sensor"
112 Say Y here if you want to build a driver for Capella CM3323
115 To compile this driver as a module, choose M here: the module will
120 tristate "CM36651 driver"
122 Say Y here if you use cm36651.
123 This option enables proximity & RGB sensor using
124 Capella cm36651 device driver.
126 To compile this driver as a module, choose M here:
127 the module will be called cm36651.
130 tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
134 select IIO_TRIGGERED_BUFFER
137 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
138 hooked to an I2C bus.
140 To compile this driver as a module, choose M here: the
141 module will be called gp2ap020a00f.
144 tristate "Intersil ISL29125 digital color light sensor"
147 select IIO_TRIGGERED_BUFFER
149 Say Y here if you want to build a driver for the Intersil ISL29125
150 RGB light sensor for I2C.
152 To compile this driver as a module, choose M here: the module will be
155 config HID_SENSOR_ALS
156 depends on HID_SENSOR_HUB
158 select IIO_TRIGGERED_BUFFER
159 select HID_SENSOR_IIO_COMMON
160 select HID_SENSOR_IIO_TRIGGER
163 Say yes here to build support for the HID SENSOR
164 Ambient light sensor.
166 To compile this driver as a module, choose M here: the
167 module will be called hid-sensor-als.
169 config HID_SENSOR_PROX
170 depends on HID_SENSOR_HUB
172 select IIO_TRIGGERED_BUFFER
173 select HID_SENSOR_IIO_COMMON
174 select HID_SENSOR_IIO_TRIGGER
177 Say yes here to build support for the HID SENSOR
180 To compile this driver as a module, choose M here: the
181 module will be called hid-sensor-prox.
184 tristate "JSA1212 ALS and proximity sensor driver"
188 Say Y here if you want to build a IIO driver for JSA1212
189 proximity & ALS sensor device.
191 To compile this driver as a module, choose M here:
192 the module will be called jsa1212.
195 tristate "ROHM RPR0521 ALS and proximity sensor driver"
199 Say Y here if you want to build support for ROHM's RPR0521
200 ambient light and proximity sensor device.
202 To compile this driver as a module, choose M here:
203 the module will be called rpr0521.
205 config SENSORS_LM3533
206 tristate "LM3533 ambient light sensor"
207 depends on MFD_LM3533
209 If you say yes here you get support for the ambient light sensor
210 interface on National Semiconductor / TI LM3533 Lighting Power
213 The sensor interface can be used to control the LEDs and backlights
214 of the chip through defining five light zones and three sets of
215 corresponding output-current values.
217 The driver provides raw and mean adc readings along with the current
218 light zone through sysfs. A threshold event can be generated on zone
219 changes. The ALS-control output values can be set per zone for the
220 three current output channels.
223 tristate "LTR-501ALS-01 light sensor"
227 select IIO_TRIGGERED_BUFFER
229 If you say yes here you get support for the Lite-On LTR-501ALS-01
230 ambient light and proximity sensor. This driver also supports LTR-559
231 ALS/PS or LTR-301 ALS sensors.
233 This driver can also be built as a module. If so, the module
234 will be called ltr501.
237 tristate "MAX44000 Ambient and Infrared Proximity Sensor"
241 select IIO_TRIGGERED_BUFFER
243 Say Y here if you want to build support for Maxim Integrated's
244 MAX44000 ambient and infrared proximity sensor device.
246 To compile this driver as a module, choose M here:
247 the module will be called max44000.
250 tristate "Texas Instruments OPT3001 Light Sensor"
253 If you say Y or M here, you get support for Texas Instruments
254 OPT3001 Ambient Light Sensor.
256 If built as a dynamically linked module, it will be called
260 tristate "TXC PA12203001 light and proximity sensor"
264 If you say yes here you get support for the TXC PA12203001
265 ambient light and proximity sensor.
267 This driver can also be built as a module. If so, the module
268 will be called pa12203001.
271 tristate "STK3310 ALS and proximity sensor"
275 Say yes here to get support for the Sensortek STK3310 ambient light
276 and proximity sensor. The STK3311 model is also supported by this
279 Choosing M will build the driver as a module. If so, the module
280 will be called stk3310.
283 tristate "TAOS TCS3414 digital color sensor"
286 select IIO_TRIGGERED_BUFFER
288 If you say yes here you get support for the TAOS TCS3414
289 family of digital color sensors.
291 This driver can also be built as a module. If so, the module
292 will be called tcs3414.
295 tristate "TAOS TCS3472 color light-to-digital converter"
298 select IIO_TRIGGERED_BUFFER
300 If you say yes here you get support for the TAOS TCS3472
301 family of color light-to-digital converters with IR filter.
303 This driver can also be built as a module. If so, the module
304 will be called tcs3472.
306 config SENSORS_TSL2563
307 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
310 If you say yes here you get support for the Taos TSL2560,
311 TSL2561, TSL2562 and TSL2563 ambient light sensors.
313 This driver can also be built as a module. If so, the module
314 will be called tsl2563.
317 tristate "TAOS TSL4531 ambient light sensors"
320 Say Y here if you want to build a driver for the TAOS TSL4531 family
321 of ambient light sensors with direct lux output.
323 To compile this driver as a module, choose M here: the
324 module will be called tsl4531.
327 tristate "UPISEMI light and proximity sensor"
330 If you say yes here you get support for the UPISEMI US5182D
331 ambient light and proximity sensor.
333 This driver can also be built as a module. If so, the module
334 will be called us5182d.
337 tristate "VCNL4000 combined ALS and proximity sensor"
340 Say Y here if you want to build a driver for the Vishay VCNL4000
341 combined ambient light and proximity sensor.
343 To compile this driver as a module, choose M here: the
344 module will be called vcnl4000.
347 tristate "VEML6070 UV A light sensor"
350 Say Y here if you want to build a driver for the Vishay VEML6070 UV A
353 To compile this driver as a module, choose M here: the
354 module will be called veml6070.