2 # Input core configuration
4 menuconfig INPUT_KEYBOARD
5 bool "Keyboards" if EMBEDDED || !X86
8 Say Y here, and a list of supported keyboards will be displayed.
9 This option doesn't affect the kernel.
15 config KEYBOARD_AAED2000
16 tristate "AAED-2000 keyboard"
17 depends on MACH_AAED2000
21 Say Y here to enable the keyboard on the Agilent AAED-2000
24 To compile this driver as a module, choose M here: the
25 module will be called aaed2000_kbd.
27 config KEYBOARD_ADP5520
28 tristate "Keypad Support for ADP5520 PMIC"
29 depends on PMIC_ADP5520
31 This option enables support for the keypad scan matrix
32 on Analog Devices ADP5520 PMICs.
34 To compile this driver as a module, choose M here: the module will
35 be called adp5520-keys.
37 config KEYBOARD_ADP5588
38 tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
41 Say Y here if you want to use a ADP5588/87 attached to your
44 To compile this driver as a module, choose M here: the
45 module will be called adp5588-keys.
48 tristate "Amiga keyboard"
51 Say Y here if you are running Linux on any AMIGA and have a keyboard
54 To compile this driver as a module, choose M here: the
55 module will be called amikbd.
61 tristate "Atari keyboard"
65 Say Y here if you are running Linux on any Atari and have a keyboard
68 To compile this driver as a module, choose M here: the
69 module will be called atakbd.
72 tristate "AT keyboard" if EMBEDDED || !X86
76 select SERIO_I8042 if X86
77 select SERIO_GSCPS2 if GSC
79 Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
80 you'll need this, unless you have a different type keyboard (USB, ADB
81 or other). This also works for AT and PS/2 keyboards connected over a
82 PS/2 to serial converter.
86 To compile this driver as a module, choose M here: the
87 module will be called atkbd.
89 config KEYBOARD_ATKBD_HP_KEYCODES
90 bool "Use HP keyboard scancodes"
91 depends on PARISC && KEYBOARD_ATKBD
94 Say Y here if you have a PA-RISC machine and want to use an AT or
95 PS/2 keyboard, and your keyboard uses keycodes that are specific to
98 Say N if you use a standard keyboard.
100 config KEYBOARD_ATKBD_RDI_KEYCODES
101 bool "Use PrecisionBook keyboard scancodes"
102 depends on KEYBOARD_ATKBD_HP_KEYCODES
105 If you have an RDI PrecisionBook, say Y here if you want to use its
106 built-in keyboard (as opposed to an external keyboard).
108 The PrecisionBook has five keys that conflict with those used by most
109 AT and PS/2 keyboards. These are as follows:
111 PrecisionBook Standard AT or PS/2
117 Left 102nd key (the key to the right of Left Shift)
119 If you say N here, and use the PrecisionBook keyboard, then each key
120 in the left-hand column will be interpreted as the corresponding key
121 in the right-hand column.
123 If you say Y here, and use an external keyboard, then each key in the
124 right-hand column will be interpreted as the key shown in the
127 config KEYBOARD_QT2160
128 tristate "Atmel AT42QT2160 Touch Sensor Chip"
129 depends on I2C && EXPERIMENTAL
131 If you say yes here you get support for Atmel AT42QT2160 Touch
132 Sensor chip as a keyboard input.
134 This driver can also be built as a module. If so, the module
135 will be called qt2160.
138 tristate "Blackfin BF54x keypad support"
139 depends on (BF54x && !BF544)
141 Say Y here if you want to use the BF54x keypad.
143 To compile this driver as a module, choose M here: the
144 module will be called bf54x-keys.
146 config KEYBOARD_LKKBD
147 tristate "DECstation/VAXstation LK201/LK401 keyboard"
150 Say Y here if you want to use a LK201 or LK401 style serial
151 keyboard. This keyboard is also useable on PCs if you attach
152 it with the inputattach program. The connector pinout is
153 described within lkkbd.c.
155 To compile this driver as a module, choose M here: the
156 module will be called lkkbd.
158 config KEYBOARD_EP93XX
159 tristate "EP93xx Matrix Keypad support"
160 depends on ARCH_EP93XX
162 Say Y here to enable the matrix keypad on the Cirrus EP93XX.
164 To compile this driver as a module, choose M here: the
165 module will be called ep93xx_keypad.
168 tristate "GPIO Buttons"
169 depends on GENERIC_GPIO
171 This driver implements support for buttons connected
172 to GPIO pins of various CPUs (and some other chips).
174 Say Y here if your device has buttons connected
175 directly to such GPIO pins. Your board-specific
176 setup logic must also provide a platform device,
177 with configuration data saying which GPIOs are used.
179 To compile this driver as a module, choose M here: the
180 module will be called gpio_keys.
182 config KEYBOARD_TCA6416
183 tristate "TCA6416 Keypad Support"
186 This driver implements basic keypad functionality
187 for keys connected through TCA6416 IO expander
189 Say Y here if your device has keys connected to
190 TCA6416 IO expander. Your board-specific setup logic
191 must also provide pin-mask details(of which TCA6416 pins
192 are used for keypad).
194 If enabled the complete TCA6416 device will be managed through
198 config KEYBOARD_MATRIX
199 tristate "GPIO driven matrix keypad support"
200 depends on GENERIC_GPIO
202 Enable support for GPIO driven matrix keypad.
204 To compile this driver as a module, choose M here: the
205 module will be called matrix_keypad.
207 config KEYBOARD_HIL_OLD
208 tristate "HP HIL keyboard support (simple driver)"
209 depends on GSC || HP300
212 The "Human Interface Loop" is a older, 8-channel USB-like
213 controller used in several Hewlett Packard models. This driver
214 was adapted from the one written for m68k/hp300, and implements
215 support for a keyboard attached to the HIL port, but not for
216 any other types of HIL input devices like mice or tablets.
217 However, it has been thoroughly tested and is stable.
219 If you want full HIL support including support for multiple
220 keyboards, mice, and tablets, you have to enable the
221 "HP System Device Controller i8042 Support" in the input/serio
225 tristate "HP HIL keyboard/pointer support"
226 depends on GSC || HP300
232 The "Human Interface Loop" is a older, 8-channel USB-like
233 controller used in several Hewlett Packard models.
234 This driver implements support for HIL-keyboards and pointing
235 devices (mice, tablets, touchscreens) attached
236 to your machine, so normally you should say Y here.
238 config KEYBOARD_HP6XX
239 tristate "HP Jornada 6xx keyboard"
243 Say Y here if you have a HP Jornada 620/660/680/690 and want to
244 support the built-in keyboard.
246 To compile this driver as a module, choose M here: the
247 module will be called jornada680_kbd.
249 config KEYBOARD_HP7XX
250 tristate "HP Jornada 7xx keyboard"
251 depends on SA1100_JORNADA720_SSP && SA1100_SSP
253 Say Y here if you have a HP Jornada 710/720/728 and want to
254 support the built-in keyboard.
256 To compile this driver as a module, choose M here: the
257 module will be called jornada720_kbd.
259 config KEYBOARD_LM8323
260 tristate "LM8323 keypad chip"
262 depends on LEDS_CLASS
264 If you say yes here you get support for the National Semiconductor
265 LM8323 keypad controller.
267 To compile this driver as a module, choose M here: the
268 module will be called lm8323.
270 config KEYBOARD_LOCOMO
271 tristate "LoCoMo Keyboard Support"
272 depends on SHARP_LOCOMO
274 Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
276 To compile this driver as a module, choose M here: the
277 module will be called locomokbd.
279 config KEYBOARD_MAPLE
280 tristate "Maple bus keyboard"
281 depends on SH_DREAMCAST && MAPLE
283 Say Y here if you have a Dreamcast console running Linux and have
284 a keyboard attached to its Maple bus.
286 To compile this driver as a module, choose M here: the
287 module will be called maple_keyb.
289 config KEYBOARD_MAX7359
290 tristate "Maxim MAX7359 Key Switch Controller"
293 If you say yes here you get support for the Maxim MAX7359 Key
294 Switch Controller chip. This providers microprocessors with
295 management of up to 64 key switches
297 To compile this driver as a module, choose M here: the
298 module will be called max7359_keypad.
301 tristate "MELFAS MCS Touchkey"
304 Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
309 To compile this driver as a module, choose M here: the
310 module will be called mcs_touchkey.
313 tristate "IMX keypad support"
316 Enable support for IMX keypad port.
318 To compile this driver as a module, choose M here: the
319 module will be called imx_keypad.
321 config KEYBOARD_NEWTON
322 tristate "Newton keyboard"
325 Say Y here if you have a Newton keyboard on a serial port.
327 To compile this driver as a module, choose M here: the
328 module will be called newtonkbd.
330 config KEYBOARD_OPENCORES
331 tristate "OpenCores Keyboard Controller"
333 Say Y here if you want to use the OpenCores Keyboard Controller
334 http://www.opencores.org/project,keyboardcontroller
336 To compile this driver as a module, choose M here; the
337 module will be called opencores-kbd.
339 config KEYBOARD_PXA27x
340 tristate "PXA27x/PXA3xx keypad support"
341 depends on PXA27x || PXA3xx
343 Enable support for PXA27x/PXA3xx keypad controller.
345 To compile this driver as a module, choose M here: the
346 module will be called pxa27x_keypad.
348 config KEYBOARD_PXA930_ROTARY
349 tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
350 depends on CPU_PXA930 || CPU_PXA935
352 Enable support for PXA930/PXA935 Enhanced Rotary Controller.
354 To compile this driver as a module, choose M here: the
355 module will be called pxa930_rotary.
357 config KEYBOARD_SAMSUNG
358 tristate "Samsung keypad support"
359 depends on SAMSUNG_DEV_KEYPAD
361 Say Y here if you want to use the Samsung keypad.
363 To compile this driver as a module, choose M here: the
364 module will be called samsung-keypad.
366 config KEYBOARD_STOWAWAY
367 tristate "Stowaway keyboard"
370 Say Y here if you have a Stowaway keyboard on a serial port.
371 Stowaway compatible keyboards like Dicota Input-PDA keyboard
372 are also supported by this driver.
374 To compile this driver as a module, choose M here: the
375 module will be called stowaway.
377 config KEYBOARD_SUNKBD
378 tristate "Sun Type 4 and Type 5 keyboard"
381 Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
382 connected either to the Sun keyboard connector or to an serial
383 (RS-232) port via a simple adapter.
385 To compile this driver as a module, choose M here: the
386 module will be called sunkbd.
388 config KEYBOARD_SH_KEYSC
389 tristate "SuperH KEYSC keypad support"
390 depends on SUPERH || ARCH_SHMOBILE
392 Say Y here if you want to use a keypad attached to the KEYSC block
393 on SuperH processors such as sh7722 and sh7343.
395 To compile this driver as a module, choose M here: the
396 module will be called sh_keysc.
398 config KEYBOARD_DAVINCI
399 tristate "TI DaVinci Key Scan"
400 depends on ARCH_DAVINCI_DM365
402 Say Y to enable keypad module support for the TI DaVinci
405 To compile this driver as a module, choose M here: the
406 module will be called davinci_keyscan.
409 tristate "TI OMAP keypad support"
410 depends on (ARCH_OMAP1 || ARCH_OMAP2)
412 Say Y here if you want to use the OMAP keypad.
414 To compile this driver as a module, choose M here: the
415 module will be called omap-keypad.
417 config KEYBOARD_TWL4030
418 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
419 depends on TWL4030_CORE
421 Say Y here if your board use the keypad controller on
422 TWL4030 family chips. It's safe to say enable this
423 even on boards that don't use the keypad controller.
425 To compile this driver as a module, choose M here: the
426 module will be called twl4030_keypad.
428 config KEYBOARD_XTKBD
429 tristate "XT keyboard"
432 Say Y here if you want to use the old IBM PC/XT keyboard (or
433 compatible) on your system. This is only possible with a
434 parallel port keyboard adapter, you cannot connect it to the
435 keyboard port on a PC that runs Linux.
437 To compile this driver as a module, choose M here: the
438 module will be called xtkbd.
440 config KEYBOARD_W90P910
441 tristate "W90P910 Matrix Keypad support"
442 depends on ARCH_W90X900
444 Say Y here to enable the matrix keypad on evaluation board
447 To compile this driver as a module, choose M here: the
448 module will be called w90p910_keypad.