2 * USB driver for Gigaset 307x directly or using M105 Data.
4 * Copyright (c) 2001 by Stefan Eilers
5 * and Hansjoerg Lipp <hjlipp@web.de>.
7 * This driver was derived from the USB skeleton driver by
8 * Greg Kroah-Hartman <greg@kroah.com>
10 * =====================================================================
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 * =====================================================================
19 #include <linux/usb.h>
20 #include <linux/module.h>
21 #include <linux/moduleparam.h>
23 /* Version Information */
24 #define DRIVER_AUTHOR "Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers"
25 #define DRIVER_DESC "USB Driver for Gigaset 307x using M105"
27 /* Module parameters */
29 static int startmode = SM_ISDN;
30 static int cidmode = 1;
32 module_param(startmode, int, S_IRUGO);
33 module_param(cidmode, int, S_IRUGO);
34 MODULE_PARM_DESC(startmode, "start in isdn4linux mode");
35 MODULE_PARM_DESC(cidmode, "Call-ID mode");
37 #define GIGASET_MINORS 1
38 #define GIGASET_MINOR 8
39 #define GIGASET_MODULENAME "usb_gigaset"
40 #define GIGASET_DEVNAME "ttyGU"
42 /* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
43 #define IF_WRITEBUF 264
45 /* Values for the Gigaset M105 Data */
46 #define USB_M105_VENDOR_ID 0x0681
47 #define USB_M105_PRODUCT_ID 0x0009
49 /* table of devices that work with this driver */
50 static const struct usb_device_id gigaset_table[] = {
51 { USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) },
52 { } /* Terminating entry */
55 MODULE_DEVICE_TABLE(usb, gigaset_table);
58 * Control requests (empty fields: 00)
60 * RT|RQ|VALUE|INDEX|LEN |DATA
63 * Get flags (1 byte). Bits: 0=dtr,1=rts,3-7:?
65 * Get device information/status (llll: 0x200 and 0x40 seen).
66 * Real size: I only saw MIN(llll,0x64).
67 * Contents: seems to be always the same...
68 * offset 0x00: Length of this structure (0x64) (len: 1,2,3 bytes)
69 * offset 0x3c: String (16 bit chars): "MCCI USB Serial V2.0"
73 * Initialize/reset device ?
75 * ? (xx=00 or 01; 01 on start, 00 on close)
77 * Set/clear flags vv=value, mm=mask (see RQ 08)
79 * Used before the following configuration requests are issued
80 * (with xx=0x0f). I've seen other values<0xf, though.
82 * Set baud rate. xxxx=ceil(0x384000/rate)=trunc(0x383fff/rate)+1.
84 * Set byte size and parity. p: 0x20=even,0x10=odd,0x00=no parity
85 * [ 0x30: m, 0x40: s ]
86 * [s: 0: 1 stop bit; 1: 1.5; 2: 2]
87 * bb: bits/byte (seen 7 and 8)
88 * 41 13 -- -- -- -- 10 00 ww 00 00 00 xx 00 00 00 yy 00 00 00 zz 00 00 00
90 * Initialization: 01, 40, 00, 00
91 * Open device: 00 40, 00, 00
92 * yy and zz seem to be equal, either 0x00 or 0x0a
93 * (ww,xx) pairs seen: (00,00), (00,40), (01,40), (09,80), (19,80)
94 * 41 19 -- -- -- -- 06 00 00 00 00 xx 11 13
95 * Used after every "configuration sequence" (RQ 12, RQs 01/03/13).
96 * xx is usually 0x00 but was 0x7e before starting data transfer
97 * in unimodem mode. So, this might be an array of characters that
98 * need special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
100 * Unimodem mode: use "modprobe ppp_async flag_time=0" as the device _needs_ two
104 /* functions called if a device of this driver is connected/disconnected */
105 static int gigaset_probe(struct usb_interface *interface,
106 const struct usb_device_id *id);
107 static void gigaset_disconnect(struct usb_interface *interface);
109 /* functions called before/after suspend */
110 static int gigaset_suspend(struct usb_interface *intf, pm_message_t message);
111 static int gigaset_resume(struct usb_interface *intf);
112 static int gigaset_pre_reset(struct usb_interface *intf);
114 static struct gigaset_driver *driver;
116 /* usb specific object needed to register this driver with the usb subsystem */
117 static struct usb_driver gigaset_usb_driver = {
118 .name = GIGASET_MODULENAME,
119 .probe = gigaset_probe,
120 .disconnect = gigaset_disconnect,
121 .id_table = gigaset_table,
122 .suspend = gigaset_suspend,
123 .resume = gigaset_resume,
124 .reset_resume = gigaset_resume,
125 .pre_reset = gigaset_pre_reset,
126 .post_reset = gigaset_resume,
127 .disable_hub_initiated_lpm = 1,
130 struct usb_cardstate {
131 struct usb_device *udev; /* usb device pointer */
132 struct usb_interface *interface; /* interface for this device */
133 int busy; /* bulk output in progress */
136 unsigned char *bulk_out_buffer;
139 struct urb *bulk_out_urb;
142 unsigned char *rcvbuf;
144 struct urb *read_urb;
146 char bchars[6]; /* for request 0x19 */
149 static inline unsigned tiocm_to_gigaset(unsigned state)
151 return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0);
154 static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
157 struct usb_device *udev = cs->hw.usb->udev;
161 mask = tiocm_to_gigaset(old_state ^ new_state);
162 val = tiocm_to_gigaset(new_state);
164 gig_dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask);
165 r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 7, 0x41,
166 (val & 0xff) | ((mask & 0xff) << 8), 0,
167 NULL, 0, 2000 /* timeout? */);
174 * Set M105 configuration value
175 * using undocumented device commands reverse engineered from USB traces
176 * of the Siemens Windows driver
178 static int set_value(struct cardstate *cs, u8 req, u16 val)
180 struct usb_device *udev = cs->hw.usb->udev;
183 gig_dbg(DEBUG_USBREQ, "request %02x (%04x)",
184 (unsigned)req, (unsigned)val);
185 r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x12, 0x41,
186 0xf /*?*/, 0, NULL, 0, 2000 /*?*/);
187 /* no idea what this does */
189 dev_err(&udev->dev, "error %d on request 0x12\n", -r);
193 r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), req, 0x41,
194 val, 0, NULL, 0, 2000 /*?*/);
196 dev_err(&udev->dev, "error %d on request 0x%02x\n",
199 r2 = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
200 0, 0, cs->hw.usb->bchars, 6, 2000 /*?*/);
202 dev_err(&udev->dev, "error %d on request 0x19\n", -r2);
204 return r < 0 ? r : (r2 < 0 ? r2 : 0);
208 * set the baud rate on the internal serial adapter
209 * using the undocumented parameter setting command
211 static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
219 case B300: rate = 300; break;
220 case B600: rate = 600; break;
221 case B1200: rate = 1200; break;
222 case B2400: rate = 2400; break;
223 case B4800: rate = 4800; break;
224 case B9600: rate = 9600; break;
225 case B19200: rate = 19200; break;
226 case B38400: rate = 38400; break;
227 case B57600: rate = 57600; break;
228 case B115200: rate = 115200; break;
231 dev_err(cs->dev, "unsupported baudrate request 0x%x,"
232 " using default of B9600\n", cflag);
235 val = 0x383fff / rate + 1;
237 return set_value(cs, 1, val);
241 * set the line format on the internal serial adapter
242 * using the undocumented parameter setting command
244 static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
250 val |= (cflag & PARODD) ? 0x10 : 0x20;
252 /* set the number of data bits */
253 switch (cflag & CSIZE) {
255 val |= 5 << 8; break;
257 val |= 6 << 8; break;
259 val |= 7 << 8; break;
261 val |= 8 << 8; break;
263 dev_err(cs->dev, "CSIZE was not CS5-CS8, using default of 8\n");
268 /* set the number of stop bits */
269 if (cflag & CSTOPB) {
270 if ((cflag & CSIZE) == CS5)
271 val |= 1; /* 1.5 stop bits */
273 val |= 2; /* 2 stop bits */
276 return set_value(cs, 3, val);
280 /*============================================================================*/
281 static int gigaset_init_bchannel(struct bc_state *bcs)
283 /* nothing to do for M10x */
284 gigaset_bchannel_up(bcs);
288 static int gigaset_close_bchannel(struct bc_state *bcs)
290 /* nothing to do for M10x */
291 gigaset_bchannel_down(bcs);
295 static int write_modem(struct cardstate *cs);
296 static int send_cb(struct cardstate *cs);
299 /* Write tasklet handler: Continue sending current skb, or send command, or
300 * start sending an skb from the send queue.
302 static void gigaset_modem_fill(unsigned long data)
304 struct cardstate *cs = (struct cardstate *) data;
305 struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
307 gig_dbg(DEBUG_OUTPUT, "modem_fill");
309 if (cs->hw.usb->busy) {
310 gig_dbg(DEBUG_OUTPUT, "modem_fill: busy");
315 if (!bcs->tx_skb) { /* no skb is being sent */
316 if (cs->cmdbuf) { /* commands to send? */
317 gig_dbg(DEBUG_OUTPUT, "modem_fill: cb");
318 if (send_cb(cs) < 0) {
319 gig_dbg(DEBUG_OUTPUT,
320 "modem_fill: send_cb failed");
321 goto again; /* no callback will be called! */
327 bcs->tx_skb = skb_dequeue(&bcs->squeue);
331 gig_dbg(DEBUG_INTR, "Dequeued skb (Adr: %lx)!",
332 (unsigned long) bcs->tx_skb);
335 gig_dbg(DEBUG_OUTPUT, "modem_fill: tx_skb");
336 if (write_modem(cs) < 0) {
337 gig_dbg(DEBUG_OUTPUT, "modem_fill: write_modem failed");
338 goto again; /* no callback will be called! */
343 * Interrupt Input URB completion routine
345 static void gigaset_read_int_callback(struct urb *urb)
347 struct cardstate *cs = urb->context;
348 struct inbuf_t *inbuf = cs->inbuf;
349 int status = urb->status;
356 numbytes = urb->actual_length;
359 src = cs->hw.usb->rcvbuf;
362 "%s: There was no leading 0, but 0x%02x!\n",
363 __func__, (unsigned) *src);
364 ++src; /* skip leading 0x00 */
366 if (gigaset_fill_inbuf(inbuf, src, numbytes)) {
367 gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
368 gigaset_schedule_event(inbuf->cs);
371 gig_dbg(DEBUG_INTR, "Received zero block length");
373 /* The urb might have been killed. */
374 gig_dbg(DEBUG_ANY, "%s - nonzero status received: %d",
376 if (status == -ENOENT || status == -ESHUTDOWN)
377 /* killed or endpoint shutdown: don't resubmit */
382 spin_lock_irqsave(&cs->lock, flags);
383 if (!cs->connected) {
384 spin_unlock_irqrestore(&cs->lock, flags);
385 pr_err("%s: disconnected\n", __func__);
388 r = usb_submit_urb(urb, GFP_ATOMIC);
389 spin_unlock_irqrestore(&cs->lock, flags);
391 dev_err(cs->dev, "error %d resubmitting URB\n", -r);
395 /* This callback routine is called when data was transmitted to the device. */
396 static void gigaset_write_bulk_callback(struct urb *urb)
398 struct cardstate *cs = urb->context;
399 int status = urb->status;
403 case 0: /* normal completion */
405 case -ENOENT: /* killed */
406 gig_dbg(DEBUG_ANY, "%s: killed", __func__);
407 cs->hw.usb->busy = 0;
410 dev_err(cs->dev, "bulk transfer failed (status %d)\n",
412 /* That's all we can do. Communication problems
413 are handled by timeouts or network protocols. */
416 spin_lock_irqsave(&cs->lock, flags);
417 if (!cs->connected) {
418 pr_err("%s: disconnected\n", __func__);
420 cs->hw.usb->busy = 0;
421 tasklet_schedule(&cs->write_tasklet);
423 spin_unlock_irqrestore(&cs->lock, flags);
426 static int send_cb(struct cardstate *cs)
428 struct cmdbuf_t *cb = cs->cmdbuf;
431 int status = -ENOENT;
432 struct usb_cardstate *ucs = cs->hw.usb;
436 spin_lock_irqsave(&cs->cmdlock, flags);
437 cs->cmdbytes -= cs->curlen;
438 gig_dbg(DEBUG_OUTPUT, "send_cb: sent %u bytes, %u left",
439 cs->curlen, cs->cmdbytes);
440 cs->cmdbuf = cb->next;
442 cs->cmdbuf->prev = NULL;
443 cs->curlen = cs->cmdbuf->len;
445 cs->lastcmdbuf = NULL;
448 spin_unlock_irqrestore(&cs->cmdlock, flags);
450 if (cb->wake_tasklet)
451 tasklet_schedule(cb->wake_tasklet);
458 count = min(cb->len, ucs->bulk_out_size);
459 gig_dbg(DEBUG_OUTPUT, "send_cb: send %d bytes", count);
461 usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
462 usb_sndbulkpipe(ucs->udev,
463 ucs->bulk_out_epnum),
464 cb->buf + cb->offset, count,
465 gigaset_write_bulk_callback, cs);
471 spin_lock_irqsave(&cs->lock, flags);
472 status = cs->connected ?
473 usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) :
475 spin_unlock_irqrestore(&cs->lock, flags);
480 "could not submit urb (error %d)\n",
482 cb->len = 0; /* skip urb => remove cb+wakeup
483 in next loop cycle */
486 } while (cb && status); /* next command on error */
491 /* Send command to device. */
492 static int gigaset_write_cmd(struct cardstate *cs, struct cmdbuf_t *cb)
497 gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
498 DEBUG_TRANSCMD : DEBUG_LOCKCMD,
499 "CMD Transmit", cb->len, cb->buf);
501 spin_lock_irqsave(&cs->cmdlock, flags);
502 cb->prev = cs->lastcmdbuf;
504 cs->lastcmdbuf->next = cb;
507 cs->curlen = cb->len;
509 cs->cmdbytes += cb->len;
511 spin_unlock_irqrestore(&cs->cmdlock, flags);
513 spin_lock_irqsave(&cs->lock, flags);
516 tasklet_schedule(&cs->write_tasklet);
517 spin_unlock_irqrestore(&cs->lock, flags);
521 static int gigaset_write_room(struct cardstate *cs)
525 bytes = cs->cmdbytes;
526 return bytes < IF_WRITEBUF ? IF_WRITEBUF - bytes : 0;
529 static int gigaset_chars_in_buffer(struct cardstate *cs)
535 * set the break characters on the internal serial adapter
536 * using undocumented device commands reverse engineered from USB traces
537 * of the Siemens Windows driver
539 static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
541 struct usb_device *udev = cs->hw.usb->udev;
543 gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf);
544 memcpy(cs->hw.usb->bchars, buf, 6);
545 return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
546 0, 0, &buf, 6, 2000);
549 static void gigaset_freebcshw(struct bc_state *bcs)
554 /* Initialize the b-channel structure */
555 static int gigaset_initbcshw(struct bc_state *bcs)
562 static void gigaset_reinitbcshw(struct bc_state *bcs)
564 /* nothing to do for M10x */
567 static void gigaset_freecshw(struct cardstate *cs)
569 tasklet_kill(&cs->write_tasklet);
573 static int gigaset_initcshw(struct cardstate *cs)
575 struct usb_cardstate *ucs;
578 kmalloc(sizeof(struct usb_cardstate), GFP_KERNEL);
580 pr_err("out of memory\n");
588 ucs->bchars[4] = 0x11;
589 ucs->bchars[5] = 0x13;
590 ucs->bulk_out_buffer = NULL;
591 ucs->bulk_out_urb = NULL;
592 ucs->read_urb = NULL;
593 tasklet_init(&cs->write_tasklet,
594 gigaset_modem_fill, (unsigned long) cs);
599 /* Send data from current skb to the device. */
600 static int write_modem(struct cardstate *cs)
604 struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
605 struct usb_cardstate *ucs = cs->hw.usb;
608 gig_dbg(DEBUG_OUTPUT, "len: %d...", bcs->tx_skb->len);
610 if (!bcs->tx_skb->len) {
611 dev_kfree_skb_any(bcs->tx_skb);
616 /* Copy data to bulk out buffer and transmit data */
617 count = min(bcs->tx_skb->len, (unsigned) ucs->bulk_out_size);
618 skb_copy_from_linear_data(bcs->tx_skb, ucs->bulk_out_buffer, count);
619 skb_pull(bcs->tx_skb, count);
621 gig_dbg(DEBUG_OUTPUT, "write_modem: send %d bytes", count);
623 spin_lock_irqsave(&cs->lock, flags);
625 usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
626 usb_sndbulkpipe(ucs->udev,
627 ucs->bulk_out_epnum),
628 ucs->bulk_out_buffer, count,
629 gigaset_write_bulk_callback, cs);
630 ret = usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC);
634 spin_unlock_irqrestore(&cs->lock, flags);
637 dev_err(cs->dev, "could not submit urb (error %d)\n", -ret);
641 if (!bcs->tx_skb->len) {
642 /* skb sent completely */
643 gigaset_skb_sent(bcs, bcs->tx_skb);
645 gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
646 (unsigned long) bcs->tx_skb);
647 dev_kfree_skb_any(bcs->tx_skb);
654 static int gigaset_probe(struct usb_interface *interface,
655 const struct usb_device_id *id)
658 struct usb_device *udev = interface_to_usbdev(interface);
659 struct usb_host_interface *hostif = interface->cur_altsetting;
660 struct cardstate *cs = NULL;
661 struct usb_cardstate *ucs = NULL;
662 struct usb_endpoint_descriptor *endpoint;
665 gig_dbg(DEBUG_ANY, "%s: Check if device matches ...", __func__);
667 /* See if the device offered us matches what we can accept */
668 if ((le16_to_cpu(udev->descriptor.idVendor) != USB_M105_VENDOR_ID) ||
669 (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID)) {
670 gig_dbg(DEBUG_ANY, "device ID (0x%x, 0x%x) not for me - skip",
671 le16_to_cpu(udev->descriptor.idVendor),
672 le16_to_cpu(udev->descriptor.idProduct));
675 if (hostif->desc.bInterfaceNumber != 0) {
676 gig_dbg(DEBUG_ANY, "interface %d not for me - skip",
677 hostif->desc.bInterfaceNumber);
680 if (hostif->desc.bAlternateSetting != 0) {
681 dev_notice(&udev->dev, "unsupported altsetting %d - skip",
682 hostif->desc.bAlternateSetting);
685 if (hostif->desc.bInterfaceClass != 255) {
686 dev_notice(&udev->dev, "unsupported interface class %d - skip",
687 hostif->desc.bInterfaceClass);
691 dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);
693 /* allocate memory for our device state and initialize it */
694 cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
699 /* save off device structure ptrs for later use */
702 ucs->interface = interface;
703 cs->dev = &interface->dev;
705 /* save address of controller structure */
706 usb_set_intfdata(interface, cs);
708 endpoint = &hostif->endpoint[0].desc;
710 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
711 ucs->bulk_out_size = buffer_size;
712 ucs->bulk_out_epnum = usb_endpoint_num(endpoint);
713 ucs->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
714 if (!ucs->bulk_out_buffer) {
715 dev_err(cs->dev, "Couldn't allocate bulk_out_buffer\n");
720 ucs->bulk_out_urb = usb_alloc_urb(0, GFP_KERNEL);
721 if (!ucs->bulk_out_urb) {
722 dev_err(cs->dev, "Couldn't allocate bulk_out_urb\n");
727 endpoint = &hostif->endpoint[1].desc;
731 ucs->read_urb = usb_alloc_urb(0, GFP_KERNEL);
732 if (!ucs->read_urb) {
733 dev_err(cs->dev, "No free urbs available\n");
737 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
738 ucs->rcvbuf_size = buffer_size;
739 ucs->rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
741 dev_err(cs->dev, "Couldn't allocate rcvbuf\n");
745 /* Fill the interrupt urb and send it to the core */
746 usb_fill_int_urb(ucs->read_urb, udev,
747 usb_rcvintpipe(udev, usb_endpoint_num(endpoint)),
748 ucs->rcvbuf, buffer_size,
749 gigaset_read_int_callback,
750 cs, endpoint->bInterval);
752 retval = usb_submit_urb(ucs->read_urb, GFP_KERNEL);
754 dev_err(cs->dev, "Could not submit URB (error %d)\n", -retval);
758 /* tell common part that the device is ready */
759 if (startmode == SM_LOCKED)
760 cs->mstate = MS_LOCKED;
762 retval = gigaset_start(cs);
764 tasklet_kill(&cs->write_tasklet);
770 usb_kill_urb(ucs->read_urb);
771 kfree(ucs->bulk_out_buffer);
772 usb_free_urb(ucs->bulk_out_urb);
774 usb_free_urb(ucs->read_urb);
775 usb_set_intfdata(interface, NULL);
776 ucs->read_urb = ucs->bulk_out_urb = NULL;
777 ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
778 usb_put_dev(ucs->udev);
780 ucs->interface = NULL;
785 static void gigaset_disconnect(struct usb_interface *interface)
787 struct cardstate *cs;
788 struct usb_cardstate *ucs;
790 cs = usb_get_intfdata(interface);
793 dev_info(cs->dev, "disconnecting Gigaset USB adapter\n");
795 usb_kill_urb(ucs->read_urb);
799 usb_set_intfdata(interface, NULL);
800 tasklet_kill(&cs->write_tasklet);
802 usb_kill_urb(ucs->bulk_out_urb);
804 kfree(ucs->bulk_out_buffer);
805 usb_free_urb(ucs->bulk_out_urb);
807 usb_free_urb(ucs->read_urb);
808 ucs->read_urb = ucs->bulk_out_urb = NULL;
809 ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
811 usb_put_dev(ucs->udev);
812 ucs->interface = NULL;
819 * This function is called before the USB connection is suspended or reset.
821 static int gigaset_suspend(struct usb_interface *intf, pm_message_t message)
823 struct cardstate *cs = usb_get_intfdata(intf);
826 cs->connected = 0; /* prevent rescheduling */
827 usb_kill_urb(cs->hw.usb->read_urb);
828 tasklet_kill(&cs->write_tasklet);
829 usb_kill_urb(cs->hw.usb->bulk_out_urb);
831 gig_dbg(DEBUG_SUSPEND, "suspend complete");
836 * This function is called after the USB connection has been resumed or reset.
838 static int gigaset_resume(struct usb_interface *intf)
840 struct cardstate *cs = usb_get_intfdata(intf);
843 /* resubmit interrupt URB */
845 rc = usb_submit_urb(cs->hw.usb->read_urb, GFP_KERNEL);
847 dev_err(cs->dev, "Could not submit read URB (error %d)\n", -rc);
851 gig_dbg(DEBUG_SUSPEND, "resume complete");
856 * This function is called before the USB connection is reset.
858 static int gigaset_pre_reset(struct usb_interface *intf)
860 /* same as suspend */
861 return gigaset_suspend(intf, PMSG_ON);
864 static const struct gigaset_ops ops = {
867 gigaset_chars_in_buffer,
869 gigaset_init_bchannel,
870 gigaset_close_bchannel,
876 gigaset_set_modem_ctrl,
878 gigaset_set_line_ctrl,
879 gigaset_m10x_send_skb,
884 * This function is called while kernel-module is loaded
886 static int __init usb_gigaset_init(void)
890 /* allocate memory for our driver state and initialize it */
891 driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
892 GIGASET_MODULENAME, GIGASET_DEVNAME,
894 if (driver == NULL) {
899 /* register this driver with the USB subsystem */
900 result = usb_register(&gigaset_usb_driver);
902 pr_err("error %d registering USB driver\n", -result);
906 pr_info(DRIVER_DESC "\n");
911 gigaset_freedriver(driver);
917 * This function is called while unloading the kernel-module
919 static void __exit usb_gigaset_exit(void)
923 gigaset_blockdriver(driver); /* => probe will fail
924 * => no gigaset_start any more
927 /* stop all connected devices */
928 for (i = 0; i < driver->minors; i++)
929 gigaset_shutdown(driver->cs + i);
931 /* from now on, no isdn callback should be possible */
933 /* deregister this driver with the USB subsystem */
934 usb_deregister(&gigaset_usb_driver);
935 /* this will call the disconnect-callback */
936 /* from now on, no disconnect/probe callback should be running */
938 gigaset_freedriver(driver);
943 module_init(usb_gigaset_init);
944 module_exit(usb_gigaset_exit);
946 MODULE_AUTHOR(DRIVER_AUTHOR);
947 MODULE_DESCRIPTION(DRIVER_DESC);
949 MODULE_LICENSE("GPL");