]> git.karo-electronics.de Git - mv-sheeva.git/blob - drivers/isdn/hysdn/hysdn_procconf.c
Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek...
[mv-sheeva.git] / drivers / isdn / hysdn / hysdn_procconf.c
1 /* $Id: hysdn_procconf.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $
2  *
3  * Linux driver for HYSDN cards, /proc/net filesystem dir and conf functions.
4  *
5  * written by Werner Cornelius (werner@titro.de) for Hypercope GmbH
6  *
7  * Copyright 1999  by Werner Cornelius (werner@titro.de)
8  *
9  * This software may be used and distributed according to the terms
10  * of the GNU General Public License, incorporated herein by reference.
11  *
12  */
13
14 #include <linux/cred.h>
15 #include <linux/module.h>
16 #include <linux/poll.h>
17 #include <linux/proc_fs.h>
18 #include <linux/pci.h>
19 #include <linux/slab.h>
20 #include <linux/mutex.h>
21 #include <net/net_namespace.h>
22
23 #include "hysdn_defs.h"
24
25 static DEFINE_MUTEX(hysdn_conf_mutex);
26 static char *hysdn_procconf_revision = "$Revision: 1.8.6.4 $";
27
28 #define INFO_OUT_LEN 80         /* length of info line including lf */
29
30 /********************************************************/
31 /* defines and data structure for conf write operations */
32 /********************************************************/
33 #define CONF_STATE_DETECT 0     /* waiting for detect */
34 #define CONF_STATE_CONF   1     /* writing config data */
35 #define CONF_STATE_POF    2     /* writing pof data */
36 #define CONF_LINE_LEN   255     /* 255 chars max */
37
38 struct conf_writedata {
39         hysdn_card *card;       /* card the device is connected to */
40         int buf_size;           /* actual number of bytes in the buffer */
41         int needed_size;        /* needed size when reading pof */
42         int state;              /* actual interface states from above constants */
43         unsigned char conf_line[CONF_LINE_LEN]; /* buffered conf line */
44         unsigned short channel;         /* active channel number */
45         unsigned char *pof_buffer;      /* buffer when writing pof */
46 };
47
48 /***********************************************************************/
49 /* process_line parses one config line and transfers it to the card if */
50 /* necessary.                                                          */
51 /* if the return value is negative an error occurred.                   */
52 /***********************************************************************/
53 static int
54 process_line(struct conf_writedata *cnf)
55 {
56         unsigned char *cp = cnf->conf_line;
57         int i;
58
59         if (cnf->card->debug_flags & LOG_CNF_LINE)
60                 hysdn_addlog(cnf->card, "conf line: %s", cp);
61
62         if (*cp == '-') {       /* option */
63                 cp++;           /* point to option char */
64
65                 if (*cp++ != 'c')
66                         return (0);     /* option unknown or used */
67                 i = 0;          /* start value for channel */
68                 while ((*cp <= '9') && (*cp >= '0'))
69                         i = i * 10 + *cp++ - '0';       /* get decimal number */
70                 if (i > 65535) {
71                         if (cnf->card->debug_flags & LOG_CNF_MISC)
72                                 hysdn_addlog(cnf->card, "conf channel invalid  %d", i);
73                         return (-ERR_INV_CHAN);         /* invalid channel */
74                 }
75                 cnf->channel = i & 0xFFFF;      /* set new channel number */
76                 return (0);     /* success */
77         }                       /* option */
78         if (*cp == '*') {       /* line to send */
79                 if (cnf->card->debug_flags & LOG_CNF_DATA)
80                         hysdn_addlog(cnf->card, "conf chan=%d %s", cnf->channel, cp);
81                 return (hysdn_tx_cfgline(cnf->card, cnf->conf_line + 1,
82                                          cnf->channel));        /* send the line without * */
83         }                       /* line to send */
84         return (0);
85 }                               /* process_line */
86
87 /***********************************/
88 /* conf file operations and tables */
89 /***********************************/
90
91 /****************************************************/
92 /* write conf file -> boot or send cfg line to card */
93 /****************************************************/
94 static ssize_t
95 hysdn_conf_write(struct file *file, const char __user *buf, size_t count, loff_t * off)
96 {
97         struct conf_writedata *cnf;
98         int i;
99         unsigned char ch, *cp;
100
101         if (!count)
102                 return (0);     /* nothing to handle */
103
104         if (!(cnf = file->private_data))
105                 return (-EFAULT);       /* should never happen */
106
107         if (cnf->state == CONF_STATE_DETECT) {  /* auto detect cnf or pof data */
108                 if (copy_from_user(&ch, buf, 1))        /* get first char for detect */
109                         return (-EFAULT);
110
111                 if (ch == 0x1A) {
112                         /* we detected a pof file */
113                         if ((cnf->needed_size = pof_write_open(cnf->card, &cnf->pof_buffer)) <= 0)
114                                 return (cnf->needed_size);      /* an error occurred -> exit */
115                         cnf->buf_size = 0;      /* buffer is empty */
116                         cnf->state = CONF_STATE_POF;    /* new state */
117                 } else {
118                         /* conf data has been detected */
119                         cnf->buf_size = 0;      /* buffer is empty */
120                         cnf->state = CONF_STATE_CONF;   /* requested conf data write */
121                         if (cnf->card->state != CARD_STATE_RUN)
122                                 return (-ERR_NOT_BOOTED);
123                         cnf->conf_line[CONF_LINE_LEN - 1] = 0;  /* limit string length */
124                         cnf->channel = 4098;    /* default channel for output */
125                 }
126         }                       /* state was auto detect */
127         if (cnf->state == CONF_STATE_POF) {     /* pof write active */
128                 i = cnf->needed_size - cnf->buf_size;   /* bytes still missing for write */
129                 if (i <= 0)
130                         return (-EINVAL);       /* size error handling pof */
131
132                 if (i < count)
133                         count = i;      /* limit requested number of bytes */
134                 if (copy_from_user(cnf->pof_buffer + cnf->buf_size, buf, count))
135                         return (-EFAULT);       /* error while copying */
136                 cnf->buf_size += count;
137
138                 if (cnf->needed_size == cnf->buf_size) {
139                         cnf->needed_size = pof_write_buffer(cnf->card, cnf->buf_size);  /* write data */
140                         if (cnf->needed_size <= 0) {
141                                 cnf->card->state = CARD_STATE_BOOTERR;  /* show boot error */
142                                 return (cnf->needed_size);      /* an error occurred */
143                         }
144                         cnf->buf_size = 0;      /* buffer is empty again */
145                 }
146         }
147         /* pof write active */
148         else {                  /* conf write active */
149
150                 if (cnf->card->state != CARD_STATE_RUN) {
151                         if (cnf->card->debug_flags & LOG_CNF_MISC)
152                                 hysdn_addlog(cnf->card, "cnf write denied -> not booted");
153                         return (-ERR_NOT_BOOTED);
154                 }
155                 i = (CONF_LINE_LEN - 1) - cnf->buf_size;        /* bytes available in buffer */
156                 if (i > 0) {
157                         /* copy remaining bytes into buffer */
158
159                         if (count > i)
160                                 count = i;      /* limit transfer */
161                         if (copy_from_user(cnf->conf_line + cnf->buf_size, buf, count))
162                                 return (-EFAULT);       /* error while copying */
163
164                         i = count;      /* number of chars in buffer */
165                         cp = cnf->conf_line + cnf->buf_size;
166                         while (i) {
167                                 /* search for end of line */
168                                 if ((*cp < ' ') && (*cp != 9))
169                                         break;  /* end of line found */
170                                 cp++;
171                                 i--;
172                         }       /* search for end of line */
173
174                         if (i) {
175                                 /* delimiter found */
176                                 *cp++ = 0;      /* string termination */
177                                 count -= (i - 1);       /* subtract remaining bytes from count */
178                                 while ((i) && (*cp < ' ') && (*cp != 9)) {
179                                         i--;    /* discard next char */
180                                         count++;        /* mark as read */
181                                         cp++;   /* next char */
182                                 }
183                                 cnf->buf_size = 0;      /* buffer is empty after transfer */
184                                 if ((i = process_line(cnf)) < 0)        /* handle the line */
185                                         count = i;      /* return the error */
186                         }
187                         /* delimiter found */
188                         else {
189                                 cnf->buf_size += count;         /* add chars to string */
190                                 if (cnf->buf_size >= CONF_LINE_LEN - 1) {
191                                         if (cnf->card->debug_flags & LOG_CNF_MISC)
192                                                 hysdn_addlog(cnf->card, "cnf line too long %d chars pos %d", cnf->buf_size, count);
193                                         return (-ERR_CONF_LONG);
194                                 }
195                         }       /* not delimited */
196
197                 }
198                 /* copy remaining bytes into buffer */
199                 else {
200                         if (cnf->card->debug_flags & LOG_CNF_MISC)
201                                 hysdn_addlog(cnf->card, "cnf line too long");
202                         return (-ERR_CONF_LONG);
203                 }
204         }                       /* conf write active */
205
206         return (count);
207 }                               /* hysdn_conf_write */
208
209 /*******************************************/
210 /* read conf file -> output card info data */
211 /*******************************************/
212 static ssize_t
213 hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off)
214 {
215         char *cp;
216
217         if (!(file->f_mode & FMODE_READ))
218                 return -EPERM;  /* no permission to read */
219
220         if (!(cp = file->private_data))
221                 return -EFAULT; /* should never happen */
222
223         return simple_read_from_buffer(buf, count, off, cp, strlen(cp));
224 }                               /* hysdn_conf_read */
225
226 /******************/
227 /* open conf file */
228 /******************/
229 static int
230 hysdn_conf_open(struct inode *ino, struct file *filep)
231 {
232         hysdn_card *card;
233         struct proc_dir_entry *pd;
234         struct conf_writedata *cnf;
235         char *cp, *tmp;
236
237         /* now search the addressed card */
238         mutex_lock(&hysdn_conf_mutex);
239         card = card_root;
240         while (card) {
241                 pd = card->procconf;
242                 if (pd == PDE(ino))
243                         break;
244                 card = card->next;      /* search next entry */
245         }
246         if (!card) {
247                 mutex_unlock(&hysdn_conf_mutex);
248                 return (-ENODEV);       /* device is unknown/invalid */
249         }
250         if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
251                 hysdn_addlog(card, "config open for uid=%d gid=%d mode=0x%x",
252                              filep->f_cred->fsuid, filep->f_cred->fsgid,
253                              filep->f_mode);
254
255         if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
256                 /* write only access -> write boot file or conf line */
257
258                 if (!(cnf = kmalloc(sizeof(struct conf_writedata), GFP_KERNEL))) {
259                         mutex_unlock(&hysdn_conf_mutex);
260                         return (-EFAULT);
261                 }
262                 cnf->card = card;
263                 cnf->buf_size = 0;      /* nothing buffered */
264                 cnf->state = CONF_STATE_DETECT;         /* start auto detect */
265                 filep->private_data = cnf;
266
267         } else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
268                 /* read access -> output card info data */
269
270                 if (!(tmp = kmalloc(INFO_OUT_LEN * 2 + 2, GFP_KERNEL))) {
271                         mutex_unlock(&hysdn_conf_mutex);
272                         return (-EFAULT);       /* out of memory */
273                 }
274                 filep->private_data = tmp;      /* start of string */
275
276                 /* first output a headline */
277                 sprintf(tmp, "id bus slot type irq iobase dp-mem     b-chans fax-chans state device");
278                 cp = tmp;       /* start of string */
279                 while (*cp)
280                         cp++;
281                 while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
282                         *cp++ = ' ';
283                 *cp++ = '\n';
284
285                 /* and now the data */
286                 sprintf(cp, "%d  %3d %4d %4d %3d 0x%04x 0x%08lx %7d %9d %3d   %s",
287                         card->myid,
288                         card->bus,
289                         PCI_SLOT(card->devfn),
290                         card->brdtype,
291                         card->irq,
292                         card->iobase,
293                         card->membase,
294                         card->bchans,
295                         card->faxchans,
296                         card->state,
297                         hysdn_net_getname(card));
298                 while (*cp)
299                         cp++;
300                 while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
301                         *cp++ = ' ';
302                 *cp++ = '\n';
303                 *cp = 0;        /* end of string */
304         } else {                /* simultaneous read/write access forbidden ! */
305                 mutex_unlock(&hysdn_conf_mutex);
306                 return (-EPERM);        /* no permission this time */
307         }
308         mutex_unlock(&hysdn_conf_mutex);
309         return nonseekable_open(ino, filep);
310 }                               /* hysdn_conf_open */
311
312 /***************************/
313 /* close a config file.    */
314 /***************************/
315 static int
316 hysdn_conf_close(struct inode *ino, struct file *filep)
317 {
318         hysdn_card *card;
319         struct conf_writedata *cnf;
320         int retval = 0;
321         struct proc_dir_entry *pd;
322
323         mutex_lock(&hysdn_conf_mutex);
324         /* search the addressed card */
325         card = card_root;
326         while (card) {
327                 pd = card->procconf;
328                 if (pd == PDE(ino))
329                         break;
330                 card = card->next;      /* search next entry */
331         }
332         if (!card) {
333                 mutex_unlock(&hysdn_conf_mutex);
334                 return (-ENODEV);       /* device is unknown/invalid */
335         }
336         if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
337                 hysdn_addlog(card, "config close for uid=%d gid=%d mode=0x%x",
338                              filep->f_cred->fsuid, filep->f_cred->fsgid,
339                              filep->f_mode);
340
341         if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
342                 /* write only access -> write boot file or conf line */
343                 if (filep->private_data) {
344                         cnf = filep->private_data;
345
346                         if (cnf->state == CONF_STATE_POF)
347                                 retval = pof_write_close(cnf->card);    /* close the pof write */
348                         kfree(filep->private_data);     /* free allocated memory for buffer */
349
350                 }               /* handle write private data */
351         } else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
352                 /* read access -> output card info data */
353
354                 kfree(filep->private_data);     /* release memory */
355         }
356         mutex_unlock(&hysdn_conf_mutex);
357         return (retval);
358 }                               /* hysdn_conf_close */
359
360 /******************************************************/
361 /* table for conf filesystem functions defined above. */
362 /******************************************************/
363 static const struct file_operations conf_fops =
364 {
365         .owner          = THIS_MODULE,
366         .llseek         = no_llseek,
367         .read           = hysdn_conf_read,
368         .write          = hysdn_conf_write,
369         .open           = hysdn_conf_open,
370         .release        = hysdn_conf_close,                                       
371 };
372
373 /*****************************/
374 /* hysdn subdir in /proc/net */
375 /*****************************/
376 struct proc_dir_entry *hysdn_proc_entry = NULL;
377
378 /*******************************************************************************/
379 /* hysdn_procconf_init is called when the module is loaded and after the cards */
380 /* have been detected. The needed proc dir and card config files are created.  */
381 /* The log init is called at last.                                             */
382 /*******************************************************************************/
383 int
384 hysdn_procconf_init(void)
385 {
386         hysdn_card *card;
387         unsigned char conf_name[20];
388
389         hysdn_proc_entry = proc_mkdir(PROC_SUBDIR_NAME, init_net.proc_net);
390         if (!hysdn_proc_entry) {
391                 printk(KERN_ERR "HYSDN: unable to create hysdn subdir\n");
392                 return (-1);
393         }
394         card = card_root;       /* point to first card */
395         while (card) {
396
397                 sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
398                 if ((card->procconf = (void *) proc_create(conf_name,
399                                                 S_IFREG | S_IRUGO | S_IWUSR,
400                                                 hysdn_proc_entry,
401                                                 &conf_fops)) != NULL) {
402                         hysdn_proclog_init(card);       /* init the log file entry */
403                 }
404                 card = card->next;      /* next entry */
405         }
406
407         printk(KERN_NOTICE "HYSDN: procfs Rev. %s initialised\n", hysdn_getrev(hysdn_procconf_revision));
408         return (0);
409 }                               /* hysdn_procconf_init */
410
411 /*************************************************************************************/
412 /* hysdn_procconf_release is called when the module is unloaded and before the cards */
413 /* resources are released. The module counter is assumed to be 0 !                   */
414 /*************************************************************************************/
415 void
416 hysdn_procconf_release(void)
417 {
418         hysdn_card *card;
419         unsigned char conf_name[20];
420
421         card = card_root;       /* start with first card */
422         while (card) {
423
424                 sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
425                 if (card->procconf)
426                         remove_proc_entry(conf_name, hysdn_proc_entry);
427
428                 hysdn_proclog_release(card);    /* init the log file entry */
429
430                 card = card->next;      /* point to next card */
431         }
432
433         remove_proc_entry(PROC_SUBDIR_NAME, init_net.proc_net);
434 }