2 tristate "Infrared remote controller adapters"
6 Enable support for Remote Controllers on Linux. This is
7 needed in order to support several video capture adapters.
9 Enable this option if you have a video capture board even
10 if you don't need IR, as otherwise, you may not be able to
11 compile the driver for your adapter.
25 Enable this option to build the Linux Infrared Remote
26 Control (LIRC) core device interface driver. The LIRC
27 interface passes raw IR to and from userspace, where the
28 LIRC daemon handles protocol decoding for IR reception and
29 encoding for IR transmitting (aka "blasting").
31 source "drivers/media/IR/keymaps/Kconfig"
34 tristate "Enable IR raw decoder for the NEC protocol"
40 Enable this option if you have IR with NEC protocol, and
41 if the IR is decoded in software
44 tristate "Enable IR raw decoder for the RC-5 protocol"
50 Enable this option if you have IR with RC-5 protocol, and
51 if the IR is decoded in software
54 tristate "Enable IR raw decoder for the RC6 protocol"
60 Enable this option if you have an infrared remote control which
61 uses the RC6 protocol, and you need software decoding support.
64 tristate "Enable IR raw decoder for the JVC protocol"
70 Enable this option if you have an infrared remote control which
71 uses the JVC protocol, and you need software decoding support.
73 config IR_SONY_DECODER
74 tristate "Enable IR raw decoder for the Sony protocol"
79 Enable this option if you have an infrared remote control which
80 uses the Sony protocol, and you need software decoding support.
83 tristate "Enable IR to LIRC bridge"
89 Enable this option to pass raw IR to and from userspace via
93 tristate "SoundGraph iMON Receiver and Display"
94 depends on USB_ARCH_HAS_HCD
98 Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
99 IR Receiver and/or LCD/VFD/VGA display.
101 To compile this driver as a module, choose M here: the
102 module will be called imon.
105 tristate "Windows Media Center Ed. eHome Infrared Transceiver"
106 depends on USB_ARCH_HAS_HCD
110 Say Y here if you want to use a Windows Media Center Edition
111 eHome Infrared Transceiver.
113 To compile this driver as a module, choose M here: the
114 module will be called mceusb.
117 tristate "ENE eHome Receiver/Transciever (pnp id: ENE0100/ENE02xxx)"
121 Say Y here to enable support for integrated infrared receiver
122 /transciever made by ENE.
124 You can see if you have it by looking at lspnp output.
125 Output should include ENE0100 ENE0200 or something similiar.
127 To compile this driver as a module, choose M here: the
128 module will be called ene_ir.
131 tristate "Streamzap PC Remote IR Receiver"
132 depends on USB_ARCH_HAS_HCD
136 Say Y here if you want to use a Streamzap PC Remote
139 To compile this driver as a module, choose M here: the
140 module will be called streamzap.