drivers/media/usb/em28xx/em28xx-cards.c

   1 /*
   2    em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
   3                     video capture devices
   4
   5    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   6                       Markus Rechberger <mrechberger@gmail.com>
   7                       Mauro Carvalho Chehab <mchehab@infradead.org>
   8                       Sascha Sommer <saschasommer@freenet.de>
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/slab.h>
  28 #include <linux/delay.h>
  29 #include <linux/i2c.h>
  30 #include <linux/usb.h>
  31 #include <media/tuner.h>
  32 #include <media/msp3400.h>
  33 #include <media/saa7115.h>
  34 #include <media/tvp5150.h>
  35 #include <media/tvaudio.h>
  36 #include <media/mt9v011.h>
  37 #include <media/i2c-addr.h>
  38 #include <media/tveeprom.h>
  39 #include <media/v4l2-common.h>
  40 #include <media/v4l2-chip-ident.h>
  41
  42 #include "em28xx.h"
  43
  44 #define DRIVER_NAME         "em28xx"
  45
  46 static int tuner = -1;
  47 module_param(tuner, int, 0444);
  48 MODULE_PARM_DESC(tuner, "tuner type");
  49
  50 static unsigned int disable_ir;
  51 module_param(disable_ir, int, 0444);
  52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
  53
  54 static unsigned int disable_usb_speed_check;
  55 module_param(disable_usb_speed_check, int, 0444);
  56 MODULE_PARM_DESC(disable_usb_speed_check,
  57                  "override min bandwidth requirement of 480M bps");
  58
  59 static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
  60 module_param_array(card,  int, NULL, 0444);
  61 MODULE_PARM_DESC(card,     "card type");
  62
  63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
  64 static unsigned long em28xx_devused;
  65
  66 struct em28xx_hash_table {
  67         unsigned long hash;
  68         unsigned int  model;
  69         unsigned int  tuner;
  70 };
  71
  72 static void em28xx_pre_card_setup(struct em28xx *dev);
  73
  74 /*
  75  *  Reset sequences for analog/digital modes
  76  */
  77
  78 /* Reset for the most [analog] boards */
  79 static struct em28xx_reg_seq default_analog[] = {
  80         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
  81         {       -1,             -1,     -1,             -1},
  82 };
  83
  84 /* Reset for the most [digital] boards */
  85 static struct em28xx_reg_seq default_digital[] = {
  86         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
  87         {       -1,             -1,     -1,             -1},
  88 };
  89
  90 /* Board Hauppauge WinTV HVR 900 analog */
  91 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
  92         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
  93         {0x05,                  0xff,   0x10,           10},
  94         {  -1,                  -1,     -1,             -1},
  95 };
  96
  97 /* Board Hauppauge WinTV HVR 900 digital */
  98 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
  99         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
 100         {EM2880_R04_GPO,        0x04,   0x0f,           10},
 101         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
 102         { -1,                   -1,     -1,             -1},
 103 };
 104
 105 /* Board Hauppauge WinTV HVR 900 (R2) digital */
 106 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
 107         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
 108         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
 109         { -1,                   -1,     -1,             -1},
 110 };
 111
 112 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 113 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
 114         {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
 115         {       -1,             -1,     -1,              -1},
 116 };
 117
 118 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 119
 120 /* Board  - EM2870 Kworld 355u
 121    Analog - No input analog */
 122
 123 /* Board - EM2882 Kworld 315U digital */
 124 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
 125         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 126         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 127         {EM2880_R04_GPO,        0x04,   0xff,           10},
 128         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 129         {EM28XX_R08_GPIO,       0x7e,   0xff,           10},
 130         {  -1,                  -1,     -1,             -1},
 131 };
 132
 133 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
 134         {EM2880_R04_GPO,        0x08,   0xff,           10},
 135         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 136         {EM2880_R04_GPO,        0x08,   0xff,           10},
 137         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 138         {  -1,                  -1,     -1,             -1},
 139 };
 140
 141 static struct em28xx_reg_seq kworld_330u_analog[] = {
 142         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
 143         {EM2880_R04_GPO,        0x00,   0xff,           10},
 144         { -1,                   -1,     -1,             -1},
 145 };
 146
 147 static struct em28xx_reg_seq kworld_330u_digital[] = {
 148         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 149         {EM2880_R04_GPO,        0x08,   0xff,           10},
 150         { -1,                   -1,     -1,             -1},
 151 };
 152
 153 /* Evga inDtube
 154    GPIO0 - Enable digital power (s5h1409) - low to enable
 155    GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
 156    GPIO4 - xc3028 reset
 157    GOP3  - s5h1409 reset
 158  */
 159 static struct em28xx_reg_seq evga_indtube_analog[] = {
 160         {EM28XX_R08_GPIO,       0x79,   0xff,           60},
 161         {       -1,             -1,     -1,             -1},
 162 };
 163
 164 static struct em28xx_reg_seq evga_indtube_digital[] = {
 165         {EM28XX_R08_GPIO,       0x7a,   0xff,            1},
 166         {EM2880_R04_GPO,        0x04,   0xff,           10},
 167         {EM2880_R04_GPO,        0x0c,   0xff,            1},
 168         { -1,                   -1,     -1,             -1},
 169 };
 170
 171 /*
 172  * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
 173  * EM_GPIO_0 - currently unknown
 174  * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
 175  * EM_GPIO_2 - currently unknown
 176  * EM_GPIO_3 - currently unknown
 177  * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
 178  * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
 179  * EM_GPIO_6 - currently unknown
 180  * EM_GPIO_7 - currently unknown
 181  */
 182 static struct em28xx_reg_seq kworld_a340_digital[] = {
 183         {EM28XX_R08_GPIO,       0x6d,           ~EM_GPIO_4,     10},
 184         { -1,                   -1,             -1,             -1},
 185 };
 186
 187 /* Pinnacle Hybrid Pro eb1a:2881 */
 188 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
 189         {EM28XX_R08_GPIO,       0xfd,   ~EM_GPIO_4,     10},
 190         {       -1,             -1,     -1,             -1},
 191 };
 192
 193 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
 194         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 195         {EM2880_R04_GPO,        0x04,   0xff,          100},/* zl10353 reset */
 196         {EM2880_R04_GPO,        0x0c,   0xff,            1},
 197         {       -1,             -1,     -1,             -1},
 198 };
 199
 200 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
 201         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
 202         {EM2880_R04_GPO,        0x00,   0xff,           10},
 203         { -1,                   -1,     -1,             -1},
 204 };
 205
 206 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
 207         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 208         {EM2880_R04_GPO,        0x08,   0xff,           10},
 209         { -1,                   -1,     -1,             -1},
 210 };
 211
 212 /* eb1a:2868 Reddo DVB-C USB TV Box
 213    GPIO4 - CU1216L NIM
 214    Other GPIOs seems to be don't care. */
 215 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
 216         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 217         {EM28XX_R08_GPIO,       0xde,   0xff,           10},
 218         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 219         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 220         {EM28XX_R08_GPIO,       0x7f,   0xff,           10},
 221         {EM28XX_R08_GPIO,       0x6f,   0xff,           10},
 222         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 223         {-1,                    -1,     -1,             -1},
 224 };
 225
 226 /* Callback for the most boards */
 227 static struct em28xx_reg_seq default_tuner_gpio[] = {
 228         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 229         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
 230         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 231         {  -1,                  -1,             -1,             -1},
 232 };
 233
 234 /* Mute/unmute */
 235 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
 236         {EM28XX_R08_GPIO,       5,              7,              10},
 237         {  -1,                  -1,             -1,             -1},
 238 };
 239
 240 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
 241         {EM28XX_R08_GPIO,       4,              7,              10},
 242         {  -1,                  -1,             -1,             -1},
 243 };
 244
 245 static struct em28xx_reg_seq compro_mute_gpio[] = {
 246         {EM28XX_R08_GPIO,       6,              7,              10},
 247         {  -1,                  -1,             -1,             -1},
 248 };
 249
 250 /* Terratec AV350 */
 251 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
 252         {EM28XX_R08_GPIO,       0xff,   0x7f,           10},
 253         {       -1,             -1,     -1,             -1},
 254 };
 255
 256 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
 257         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 258         {       -1,             -1,     -1,             -1},
 259 };
 260
 261 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
 262         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 263         {EM28XX_R08_GPIO,       0x01,   0xf7,           10},
 264         {       -1,             -1,     -1,             -1},
 265 };
 266
 267 static struct em28xx_reg_seq vc211a_enable[] = {
 268         {EM28XX_R08_GPIO,       0xff,   0x07,           10},
 269         {EM28XX_R08_GPIO,       0xff,   0x0f,           10},
 270         {EM28XX_R08_GPIO,       0xff,   0x0b,           10},
 271         {       -1,             -1,     -1,             -1},
 272 };
 273
 274 static struct em28xx_reg_seq dikom_dk300_digital[] = {
 275         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 276         {EM2880_R04_GPO,        0x08,   0xff,           10},
 277         { -1,                   -1,     -1,             -1},
 278 };
 279
 280
 281 /* Reset for the most [digital] boards */
 282 static struct em28xx_reg_seq leadership_digital[] = {
 283         {EM2874_R80_GPIO,       0x70,   0xff,   10},
 284         {       -1,             -1,     -1,     -1},
 285 };
 286
 287 static struct em28xx_reg_seq leadership_reset[] = {
 288         {EM2874_R80_GPIO,       0xf0,   0xff,   10},
 289         {EM2874_R80_GPIO,       0xb0,   0xff,   10},
 290         {EM2874_R80_GPIO,       0xf0,   0xff,   10},
 291         {       -1,             -1,     -1,     -1},
 292 };
 293
 294 /* 2013:024f PCTV nanoStick T2 290e
 295  * GPIO_6 - demod reset
 296  * GPIO_7 - LED
 297  */
 298 static struct em28xx_reg_seq pctv_290e[] = {
 299         {EM2874_R80_GPIO,       0x00,   0xff,           80},
 300         {EM2874_R80_GPIO,       0x40,   0xff,           80}, /* GPIO_6 = 1 */
 301         {EM2874_R80_GPIO,       0xc0,   0xff,           80}, /* GPIO_7 = 1 */
 302         {-1,                    -1,     -1,             -1},
 303 };
 304
 305 #if 0
 306 static struct em28xx_reg_seq terratec_h5_gpio[] = {
 307         {EM28XX_R08_GPIO,       0xff,   0xff,   10},
 308         {EM2874_R80_GPIO,       0xf6,   0xff,   100},
 309         {EM2874_R80_GPIO,       0xf2,   0xff,   50},
 310         {EM2874_R80_GPIO,       0xf6,   0xff,   50},
 311         { -1,                   -1,     -1,     -1},
 312 };
 313
 314 static struct em28xx_reg_seq terratec_h5_digital[] = {
 315         {EM2874_R80_GPIO,       0xf6,   0xff,   10},
 316         {EM2874_R80_GPIO,       0xe6,   0xff,   100},
 317         {EM2874_R80_GPIO,       0xa6,   0xff,   10},
 318         { -1,                   -1,     -1,     -1},
 319 };
 320 #endif
 321
 322 /* 2013:024f PCTV DVB-S2 Stick 460e
 323  * GPIO_0 - POWER_ON
 324  * GPIO_1 - BOOST
 325  * GPIO_2 - VUV_LNB (red LED)
 326  * GPIO_3 - EXT_12V
 327  * GPIO_4 - INT_DEM (DEMOD GPIO_0)
 328  * GPIO_5 - INT_LNB
 329  * GPIO_6 - RESET_DEM
 330  * GPIO_7 - LED (green LED)
 331  */
 332 static struct em28xx_reg_seq pctv_460e[] = {
 333         {EM2874_R80_GPIO, 0x01, 0xff,  50},
 334         {0x0d,            0xff, 0xff,  50},
 335         {EM2874_R80_GPIO, 0x41, 0xff,  50}, /* GPIO_6=1 */
 336         {0x0d,            0x42, 0xff,  50},
 337         {EM2874_R80_GPIO, 0x61, 0xff,  50}, /* GPIO_5=1 */
 338         {             -1,   -1,   -1,  -1},
 339 };
 340
 341 #if 0
 342 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
 343         {EM2874_R80_GPIO,       0x6f,   0xff,   10},
 344         {EM2874_R80_GPIO,       0x4f,   0xff,   10}, /* xc5000 reset */
 345         {EM2874_R80_GPIO,       0x6f,   0xff,   10},
 346         {EM2874_R80_GPIO,       0x4f,   0xff,   10},
 347         { -1,                   -1,     -1,     -1},
 348 };
 349
 350 static struct em28xx_reg_seq hauppauge_930c_digital[] = {
 351         {EM2874_R80_GPIO,       0xf6,   0xff,   10},
 352         {EM2874_R80_GPIO,       0xe6,   0xff,   100},
 353         {EM2874_R80_GPIO,       0xa6,   0xff,   10},
 354         { -1,                   -1,     -1,     -1},
 355 };
 356 #endif
 357
 358 /* 1b80:e425 MaxMedia UB425-TC
 359  * GPIO_6 - demod reset, 0=active
 360  * GPIO_7 - LED, 0=active
 361  */
 362 static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
 363         {EM2874_R80_GPIO,  0x83,  0xff,  100},
 364         {EM2874_R80_GPIO,  0xc3,  0xff,  100}, /* GPIO_6 = 1 */
 365         {EM2874_R80_GPIO,  0x43,  0xff,  000}, /* GPIO_7 = 0 */
 366         {-1,                 -1,    -1,   -1},
 367 };
 368
 369 /* 2304:0242 PCTV QuatroStick (510e)
 370  * GPIO_2: decoder reset, 0=active
 371  * GPIO_4: decoder suspend, 0=active
 372  * GPIO_6: demod reset, 0=active
 373  * GPIO_7: LED, 1=active
 374  */
 375 static struct em28xx_reg_seq pctv_510e[] = {
 376         {EM2874_R80_GPIO, 0x10, 0xff, 100},
 377         {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
 378         {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
 379         {             -1,   -1,   -1,  -1},
 380 };
 381
 382 /* 2013:0251 PCTV QuatroStick nano (520e)
 383  * GPIO_2: decoder reset, 0=active
 384  * GPIO_4: decoder suspend, 0=active
 385  * GPIO_6: demod reset, 0=active
 386  * GPIO_7: LED, 1=active
 387  */
 388 static struct em28xx_reg_seq pctv_520e[] = {
 389         {EM2874_R80_GPIO, 0x10, 0xff, 100},
 390         {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
 391         {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
 392         {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
 393         {             -1,   -1,   -1,  -1},
 394 };
 395
 396 /*
 397  *  Board definitions
 398  */
 399 struct em28xx_board em28xx_boards[] = {
 400         [EM2750_BOARD_UNKNOWN] = {
 401                 .name          = "EM2710/EM2750/EM2751 webcam grabber",
 402                 .xclk          = EM28XX_XCLK_FREQUENCY_20MHZ,
 403                 .tuner_type    = TUNER_ABSENT,
 404                 .is_webcam     = 1,
 405                 .input         = { {
 406                         .type     = EM28XX_VMUX_COMPOSITE1,
 407                         .vmux     = 0,
 408                         .amux     = EM28XX_AMUX_VIDEO,
 409                         .gpio     = silvercrest_reg_seq,
 410                 } },
 411         },
 412         [EM2800_BOARD_UNKNOWN] = {
 413                 .name         = "Unknown EM2800 video grabber",
 414                 .is_em2800    = 1,
 415                 .tda9887_conf = TDA9887_PRESENT,
 416                 .decoder      = EM28XX_SAA711X,
 417                 .tuner_type   = TUNER_ABSENT,
 418                 .input        = { {
 419                         .type     = EM28XX_VMUX_COMPOSITE1,
 420                         .vmux     = SAA7115_COMPOSITE0,
 421                         .amux     = EM28XX_AMUX_LINE_IN,
 422                 }, {
 423                         .type     = EM28XX_VMUX_SVIDEO,
 424                         .vmux     = SAA7115_SVIDEO3,
 425                         .amux     = EM28XX_AMUX_LINE_IN,
 426                 } },
 427         },
 428         [EM2820_BOARD_UNKNOWN] = {
 429                 .name          = "Unknown EM2750/28xx video grabber",
 430                 .tuner_type    = TUNER_ABSENT,
 431                 .is_webcam     = 1,     /* To enable sensor probe */
 432         },
 433         [EM2750_BOARD_DLCW_130] = {
 434                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 435                 .name          = "Huaqi DLCW-130",
 436                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
 437                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
 438                 .tuner_type    = TUNER_ABSENT,
 439                 .is_webcam     = 1,
 440                 .input         = { {
 441                         .type     = EM28XX_VMUX_COMPOSITE1,
 442                         .vmux     = 0,
 443                         .amux     = EM28XX_AMUX_VIDEO,
 444                 } },
 445         },
 446         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 447                 .name         = "Kworld PVR TV 2800 RF",
 448                 .tuner_type   = TUNER_TEMIC_PAL,
 449                 .tda9887_conf = TDA9887_PRESENT,
 450                 .decoder      = EM28XX_SAA711X,
 451                 .input        = { {
 452                         .type     = EM28XX_VMUX_COMPOSITE1,
 453                         .vmux     = SAA7115_COMPOSITE0,
 454                         .amux     = EM28XX_AMUX_LINE_IN,
 455                 }, {
 456                         .type     = EM28XX_VMUX_SVIDEO,
 457                         .vmux     = SAA7115_SVIDEO3,
 458                         .amux     = EM28XX_AMUX_LINE_IN,
 459                 } },
 460         },
 461         [EM2820_BOARD_GADMEI_TVR200] = {
 462                 .name         = "Gadmei TVR200",
 463                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 464                 .tda9887_conf = TDA9887_PRESENT,
 465                 .decoder      = EM28XX_SAA711X,
 466                 .input        = { {
 467                         .type     = EM28XX_VMUX_TELEVISION,
 468                         .vmux     = SAA7115_COMPOSITE2,
 469                         .amux     = EM28XX_AMUX_LINE_IN,
 470                 }, {
 471                         .type     = EM28XX_VMUX_COMPOSITE1,
 472                         .vmux     = SAA7115_COMPOSITE0,
 473                         .amux     = EM28XX_AMUX_LINE_IN,
 474                 }, {
 475                         .type     = EM28XX_VMUX_SVIDEO,
 476                         .vmux     = SAA7115_SVIDEO3,
 477                         .amux     = EM28XX_AMUX_LINE_IN,
 478                 } },
 479         },
 480         [EM2820_BOARD_TERRATEC_CINERGY_250] = {
 481                 .name         = "Terratec Cinergy 250 USB",
 482                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 483                 .has_ir_i2c   = 1,
 484                 .tda9887_conf = TDA9887_PRESENT,
 485                 .decoder      = EM28XX_SAA711X,
 486                 .input        = { {
 487                         .type     = EM28XX_VMUX_TELEVISION,
 488                         .vmux     = SAA7115_COMPOSITE2,
 489                         .amux     = EM28XX_AMUX_LINE_IN,
 490                 }, {
 491                         .type     = EM28XX_VMUX_COMPOSITE1,
 492                         .vmux     = SAA7115_COMPOSITE0,
 493                         .amux     = EM28XX_AMUX_LINE_IN,
 494                 }, {
 495                         .type     = EM28XX_VMUX_SVIDEO,
 496                         .vmux     = SAA7115_SVIDEO3,
 497                         .amux     = EM28XX_AMUX_LINE_IN,
 498                 } },
 499         },
 500         [EM2820_BOARD_PINNACLE_USB_2] = {
 501                 .name         = "Pinnacle PCTV USB 2",
 502                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 503                 .has_ir_i2c   = 1,
 504                 .tda9887_conf = TDA9887_PRESENT,
 505                 .decoder      = EM28XX_SAA711X,
 506                 .input        = { {
 507                         .type     = EM28XX_VMUX_TELEVISION,
 508                         .vmux     = SAA7115_COMPOSITE2,
 509                         .amux     = EM28XX_AMUX_VIDEO,
 510                 }, {
 511                         .type     = EM28XX_VMUX_COMPOSITE1,
 512                         .vmux     = SAA7115_COMPOSITE0,
 513                         .amux     = EM28XX_AMUX_LINE_IN,
 514                 }, {
 515                         .type     = EM28XX_VMUX_SVIDEO,
 516                         .vmux     = SAA7115_SVIDEO3,
 517                         .amux     = EM28XX_AMUX_LINE_IN,
 518                 } },
 519         },
 520         [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 521                 .name         = "Hauppauge WinTV USB 2",
 522                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 523                 .tda9887_conf = TDA9887_PRESENT |
 524                                 TDA9887_PORT1_ACTIVE |
 525                                 TDA9887_PORT2_ACTIVE,
 526                 .decoder      = EM28XX_TVP5150,
 527                 .has_msp34xx  = 1,
 528                 .has_ir_i2c   = 1,
 529                 .input        = { {
 530                         .type     = EM28XX_VMUX_TELEVISION,
 531                         .vmux     = TVP5150_COMPOSITE0,
 532                         .amux     = MSP_INPUT_DEFAULT,
 533                 }, {
 534                         .type     = EM28XX_VMUX_SVIDEO,
 535                         .vmux     = TVP5150_SVIDEO,
 536                         .amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
 537                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 538                 } },
 539         },
 540         [EM2820_BOARD_DLINK_USB_TV] = {
 541                 .name         = "D-Link DUB-T210 TV Tuner",
 542                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 543                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 544                 .tda9887_conf = TDA9887_PRESENT,
 545                 .decoder      = EM28XX_SAA711X,
 546                 .input        = { {
 547                         .type     = EM28XX_VMUX_TELEVISION,
 548                         .vmux     = SAA7115_COMPOSITE2,
 549                         .amux     = EM28XX_AMUX_LINE_IN,
 550                 }, {
 551                         .type     = EM28XX_VMUX_COMPOSITE1,
 552                         .vmux     = SAA7115_COMPOSITE0,
 553                         .amux     = EM28XX_AMUX_LINE_IN,
 554                 }, {
 555                         .type     = EM28XX_VMUX_SVIDEO,
 556                         .vmux     = SAA7115_SVIDEO3,
 557                         .amux     = EM28XX_AMUX_LINE_IN,
 558                 } },
 559         },
 560         [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 561                 .name         = "Hercules Smart TV USB 2.0",
 562                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 563                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 564                 .tda9887_conf = TDA9887_PRESENT,
 565                 .decoder      = EM28XX_SAA711X,
 566                 .input        = { {
 567                         .type     = EM28XX_VMUX_TELEVISION,
 568                         .vmux     = SAA7115_COMPOSITE2,
 569                         .amux     = EM28XX_AMUX_LINE_IN,
 570                 }, {
 571                         .type     = EM28XX_VMUX_COMPOSITE1,
 572                         .vmux     = SAA7115_COMPOSITE0,
 573                         .amux     = EM28XX_AMUX_LINE_IN,
 574                 }, {
 575                         .type     = EM28XX_VMUX_SVIDEO,
 576                         .vmux     = SAA7115_SVIDEO3,
 577                         .amux     = EM28XX_AMUX_LINE_IN,
 578                 } },
 579         },
 580         [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 581                 .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 582                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 583                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 584                 .tda9887_conf = TDA9887_PRESENT,
 585                 .decoder      = EM28XX_SAA711X,
 586                 .input        = { {
 587                         .type     = EM28XX_VMUX_TELEVISION,
 588                         .vmux     = SAA7115_COMPOSITE2,
 589                         .amux     = EM28XX_AMUX_VIDEO,
 590                 }, {
 591                         .type     = EM28XX_VMUX_COMPOSITE1,
 592                         .vmux     = SAA7115_COMPOSITE0,
 593                         .amux     = EM28XX_AMUX_LINE_IN,
 594                 }, {
 595                         .type     = EM28XX_VMUX_SVIDEO,
 596                         .vmux     = SAA7115_SVIDEO3,
 597                         .amux     = EM28XX_AMUX_LINE_IN,
 598                 } },
 599         },
 600         [EM2820_BOARD_GADMEI_UTV310] = {
 601                 .name         = "Gadmei UTV310",
 602                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 603                 .tuner_type   = TUNER_TNF_5335MF,
 604                 .tda9887_conf = TDA9887_PRESENT,
 605                 .decoder      = EM28XX_SAA711X,
 606                 .input        = { {
 607                         .type     = EM28XX_VMUX_TELEVISION,
 608                         .vmux     = SAA7115_COMPOSITE1,
 609                         .amux     = EM28XX_AMUX_LINE_IN,
 610                 }, {
 611                         .type     = EM28XX_VMUX_COMPOSITE1,
 612                         .vmux     = SAA7115_COMPOSITE0,
 613                         .amux     = EM28XX_AMUX_LINE_IN,
 614                 }, {
 615                         .type     = EM28XX_VMUX_SVIDEO,
 616                         .vmux     = SAA7115_SVIDEO3,
 617                         .amux     = EM28XX_AMUX_LINE_IN,
 618                 } },
 619         },
 620         [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 621                 .name         = "Leadtek Winfast USB II Deluxe",
 622                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 623                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 624                 .has_ir_i2c   = 1,
 625                 .tvaudio_addr = 0x58,
 626                 .tda9887_conf = TDA9887_PRESENT |
 627                                 TDA9887_PORT2_ACTIVE |
 628                                 TDA9887_QSS,
 629                 .decoder      = EM28XX_SAA711X,
 630                 .adecoder     = EM28XX_TVAUDIO,
 631                 .input        = { {
 632                         .type     = EM28XX_VMUX_TELEVISION,
 633                         .vmux     = SAA7115_COMPOSITE4,
 634                         .amux     = EM28XX_AMUX_AUX,
 635                 }, {
 636                         .type     = EM28XX_VMUX_COMPOSITE1,
 637                         .vmux     = SAA7115_COMPOSITE5,
 638                         .amux     = EM28XX_AMUX_LINE_IN,
 639                 }, {
 640                         .type     = EM28XX_VMUX_SVIDEO,
 641                         .vmux     = SAA7115_SVIDEO3,
 642                         .amux     = EM28XX_AMUX_LINE_IN,
 643                 } },
 644                         .radio    = {
 645                         .type     = EM28XX_RADIO,
 646                         .amux     = EM28XX_AMUX_AUX,
 647                         }
 648         },
 649         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 650                 .name         = "Videology 20K14XUSB USB2.0",
 651                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 652                 .tuner_type   = TUNER_ABSENT,
 653                 .is_webcam    = 1,
 654                 .input        = { {
 655                         .type     = EM28XX_VMUX_COMPOSITE1,
 656                         .vmux     = 0,
 657                         .amux     = EM28XX_AMUX_VIDEO,
 658                 } },
 659         },
 660         [EM2820_BOARD_SILVERCREST_WEBCAM] = {
 661                 .name         = "Silvercrest Webcam 1.3mpix",
 662                 .tuner_type   = TUNER_ABSENT,
 663                 .is_webcam    = 1,
 664                 .input        = { {
 665                         .type     = EM28XX_VMUX_COMPOSITE1,
 666                         .vmux     = 0,
 667                         .amux     = EM28XX_AMUX_VIDEO,
 668                         .gpio     = silvercrest_reg_seq,
 669                 } },
 670         },
 671         [EM2821_BOARD_SUPERCOMP_USB_2] = {
 672                 .name         = "Supercomp USB 2.0 TV",
 673                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 674                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 675                 .tda9887_conf = TDA9887_PRESENT |
 676                                 TDA9887_PORT1_ACTIVE |
 677                                 TDA9887_PORT2_ACTIVE,
 678                 .decoder      = EM28XX_SAA711X,
 679                 .input        = { {
 680                         .type     = EM28XX_VMUX_TELEVISION,
 681                         .vmux     = SAA7115_COMPOSITE2,
 682                         .amux     = EM28XX_AMUX_LINE_IN,
 683                 }, {
 684                         .type     = EM28XX_VMUX_COMPOSITE1,
 685                         .vmux     = SAA7115_COMPOSITE0,
 686                         .amux     = EM28XX_AMUX_VIDEO,
 687                 }, {
 688                         .type     = EM28XX_VMUX_SVIDEO,
 689                         .vmux     = SAA7115_SVIDEO3,
 690                         .amux     = EM28XX_AMUX_LINE_IN,
 691                 } },
 692         },
 693         [EM2821_BOARD_USBGEAR_VD204] = {
 694                 .name         = "Usbgear VD204v9",
 695                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 696                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 697                 .decoder      = EM28XX_SAA711X,
 698                 .input        = { {
 699                         .type  = EM28XX_VMUX_COMPOSITE1,
 700                         .vmux  = SAA7115_COMPOSITE0,
 701                         .amux  = EM28XX_AMUX_LINE_IN,
 702                 }, {
 703                         .type  = EM28XX_VMUX_SVIDEO,
 704                         .vmux  = SAA7115_SVIDEO3,
 705                         .amux  = EM28XX_AMUX_LINE_IN,
 706                 } },
 707         },
 708         [EM2860_BOARD_NETGMBH_CAM] = {
 709                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 710                 .name         = "NetGMBH Cam",
 711                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 712                 .tuner_type   = TUNER_ABSENT,
 713                 .is_webcam    = 1,
 714                 .input        = { {
 715                         .type     = EM28XX_VMUX_COMPOSITE1,
 716                         .vmux     = 0,
 717                         .amux     = EM28XX_AMUX_VIDEO,
 718                 } },
 719         },
 720         [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
 721                 .name         = "Typhoon DVD Maker",
 722                 .decoder      = EM28XX_SAA711X,
 723                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 724                 .input        = { {
 725                         .type  = EM28XX_VMUX_COMPOSITE1,
 726                         .vmux  = SAA7115_COMPOSITE0,
 727                         .amux  = EM28XX_AMUX_LINE_IN,
 728                 }, {
 729                         .type  = EM28XX_VMUX_SVIDEO,
 730                         .vmux  = SAA7115_SVIDEO3,
 731                         .amux  = EM28XX_AMUX_LINE_IN,
 732                 } },
 733         },
 734         [EM2860_BOARD_GADMEI_UTV330] = {
 735                 .name         = "Gadmei UTV330",
 736                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 737                 .tuner_type   = TUNER_TNF_5335MF,
 738                 .tda9887_conf = TDA9887_PRESENT,
 739                 .decoder      = EM28XX_SAA711X,
 740                 .input        = { {
 741                         .type     = EM28XX_VMUX_TELEVISION,
 742                         .vmux     = SAA7115_COMPOSITE2,
 743                         .amux     = EM28XX_AMUX_VIDEO,
 744                 }, {
 745                         .type     = EM28XX_VMUX_COMPOSITE1,
 746                         .vmux     = SAA7115_COMPOSITE0,
 747                         .amux     = EM28XX_AMUX_LINE_IN,
 748                 }, {
 749                         .type     = EM28XX_VMUX_SVIDEO,
 750                         .vmux     = SAA7115_SVIDEO3,
 751                         .amux     = EM28XX_AMUX_LINE_IN,
 752                 } },
 753         },
 754         [EM2861_BOARD_GADMEI_UTV330PLUS] = {
 755                 .name         = "Gadmei UTV330+",
 756                 .tuner_type   = TUNER_TNF_5335MF,
 757                 .tda9887_conf = TDA9887_PRESENT,
 758                 .ir_codes     = RC_MAP_GADMEI_RM008Z,
 759                 .decoder      = EM28XX_SAA711X,
 760                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
 761                 .input        = { {
 762                         .type     = EM28XX_VMUX_TELEVISION,
 763                         .vmux     = SAA7115_COMPOSITE2,
 764                         .amux     = EM28XX_AMUX_VIDEO,
 765                 }, {
 766                         .type     = EM28XX_VMUX_COMPOSITE1,
 767                         .vmux     = SAA7115_COMPOSITE0,
 768                         .amux     = EM28XX_AMUX_LINE_IN,
 769                 }, {
 770                         .type     = EM28XX_VMUX_SVIDEO,
 771                         .vmux     = SAA7115_SVIDEO3,
 772                         .amux     = EM28XX_AMUX_LINE_IN,
 773                 } },
 774         },
 775         [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 776                 .name         = "Terratec Cinergy A Hybrid XS",
 777                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 778                 .tuner_type   = TUNER_XC2028,
 779                 .tuner_gpio   = default_tuner_gpio,
 780                 .decoder      = EM28XX_TVP5150,
 781
 782                 .input        = { {
 783                         .type     = EM28XX_VMUX_TELEVISION,
 784                         .vmux     = TVP5150_COMPOSITE0,
 785                         .amux     = EM28XX_AMUX_VIDEO,
 786                         .gpio     = hauppauge_wintv_hvr_900_analog,
 787                 }, {
 788                         .type     = EM28XX_VMUX_COMPOSITE1,
 789                         .vmux     = TVP5150_COMPOSITE1,
 790                         .amux     = EM28XX_AMUX_LINE_IN,
 791                         .gpio     = hauppauge_wintv_hvr_900_analog,
 792                 }, {
 793                         .type     = EM28XX_VMUX_SVIDEO,
 794                         .vmux     = TVP5150_SVIDEO,
 795                         .amux     = EM28XX_AMUX_LINE_IN,
 796                         .gpio     = hauppauge_wintv_hvr_900_analog,
 797                 } },
 798         },
 799         [EM2861_BOARD_KWORLD_PVRTV_300U] = {
 800                 .name         = "KWorld PVRTV 300U",
 801                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 802                 .tuner_type   = TUNER_XC2028,
 803                 .tuner_gpio   = default_tuner_gpio,
 804                 .decoder      = EM28XX_TVP5150,
 805                 .input        = { {
 806                         .type     = EM28XX_VMUX_TELEVISION,
 807                         .vmux     = TVP5150_COMPOSITE0,
 808                         .amux     = EM28XX_AMUX_VIDEO,
 809                 }, {
 810                         .type     = EM28XX_VMUX_COMPOSITE1,
 811                         .vmux     = TVP5150_COMPOSITE1,
 812                         .amux     = EM28XX_AMUX_LINE_IN,
 813                 }, {
 814                         .type     = EM28XX_VMUX_SVIDEO,
 815                         .vmux     = TVP5150_SVIDEO,
 816                         .amux     = EM28XX_AMUX_LINE_IN,
 817                 } },
 818         },
 819         [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 820                 .name          = "Yakumo MovieMixer",
 821                 .tuner_type    = TUNER_ABSENT,  /* Capture only device */
 822                 .decoder       = EM28XX_TVP5150,
 823                 .input         = { {
 824                         .type     = EM28XX_VMUX_TELEVISION,
 825                         .vmux     = TVP5150_COMPOSITE0,
 826                         .amux     = EM28XX_AMUX_VIDEO,
 827                 }, {
 828                         .type     = EM28XX_VMUX_COMPOSITE1,
 829                         .vmux     = TVP5150_COMPOSITE1,
 830                         .amux     = EM28XX_AMUX_LINE_IN,
 831                 }, {
 832                         .type     = EM28XX_VMUX_SVIDEO,
 833                         .vmux     = TVP5150_SVIDEO,
 834                         .amux     = EM28XX_AMUX_LINE_IN,
 835                 } },
 836         },
 837         [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
 838                 .name          = "EM2860/TVP5150 Reference Design",
 839                 .tuner_type    = TUNER_ABSENT,  /* Capture only device */
 840                 .decoder       = EM28XX_TVP5150,
 841                 .input         = { {
 842                         .type     = EM28XX_VMUX_COMPOSITE1,
 843                         .vmux     = TVP5150_COMPOSITE1,
 844                         .amux     = EM28XX_AMUX_LINE_IN,
 845                 }, {
 846                         .type     = EM28XX_VMUX_SVIDEO,
 847                         .vmux     = TVP5150_SVIDEO,
 848                         .amux     = EM28XX_AMUX_LINE_IN,
 849                 } },
 850         },
 851         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 852                 .name         = "Plextor ConvertX PX-TV100U",
 853                 .tuner_type   = TUNER_TNF_5335MF,
 854                 .xclk         = EM28XX_XCLK_I2S_MSB_TIMING |
 855                                 EM28XX_XCLK_FREQUENCY_12MHZ,
 856                 .tda9887_conf = TDA9887_PRESENT,
 857                 .decoder      = EM28XX_TVP5150,
 858                 .has_msp34xx  = 1,
 859                 .input        = { {
 860                         .type     = EM28XX_VMUX_TELEVISION,
 861                         .vmux     = TVP5150_COMPOSITE0,
 862                         .amux     = EM28XX_AMUX_LINE_IN,
 863                         .gpio     = pinnacle_hybrid_pro_analog,
 864                 }, {
 865                         .type     = EM28XX_VMUX_COMPOSITE1,
 866                         .vmux     = TVP5150_COMPOSITE1,
 867                         .amux     = EM28XX_AMUX_LINE_IN,
 868                         .gpio     = pinnacle_hybrid_pro_analog,
 869                 }, {
 870                         .type     = EM28XX_VMUX_SVIDEO,
 871                         .vmux     = TVP5150_SVIDEO,
 872                         .amux     = EM28XX_AMUX_LINE_IN,
 873                         .gpio     = pinnacle_hybrid_pro_analog,
 874                 } },
 875         },
 876
 877         /* Those boards with em2870 are DVB Only*/
 878
 879         [EM2870_BOARD_TERRATEC_XS] = {
 880                 .name         = "Terratec Cinergy T XS",
 881                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 882                 .tuner_type   = TUNER_XC2028,
 883                 .tuner_gpio   = default_tuner_gpio,
 884         },
 885         [EM2870_BOARD_TERRATEC_XS_MT2060] = {
 886                 .name         = "Terratec Cinergy T XS (MT2060)",
 887                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 888                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 889         },
 890         [EM2870_BOARD_KWORLD_350U] = {
 891                 .name         = "Kworld 350 U DVB-T",
 892                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 893                 .tuner_type   = TUNER_XC2028,
 894                 .tuner_gpio   = default_tuner_gpio,
 895         },
 896         [EM2870_BOARD_KWORLD_355U] = {
 897                 .name         = "Kworld 355 U DVB-T",
 898                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 899                 .tuner_type   = TUNER_ABSENT,
 900                 .tuner_gpio   = default_tuner_gpio,
 901                 .has_dvb      = 1,
 902                 .dvb_gpio     = default_digital,
 903         },
 904         [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 905                 .name         = "Pinnacle PCTV DVB-T",
 906                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 907                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 908                 /* djh - I have serious doubts this is right... */
 909                 .xclk         = EM28XX_XCLK_IR_RC5_MODE |
 910                                 EM28XX_XCLK_FREQUENCY_10MHZ,
 911         },
 912         [EM2870_BOARD_COMPRO_VIDEOMATE] = {
 913                 .name         = "Compro, VideoMate U3",
 914                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 915                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 916         },
 917
 918         [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 919                 .name         = "Terratec Hybrid XS Secam",
 920                 .has_msp34xx  = 1,
 921                 .tuner_type   = TUNER_XC2028,
 922                 .tuner_gpio   = default_tuner_gpio,
 923                 .decoder      = EM28XX_TVP5150,
 924                 .has_dvb      = 1,
 925                 .dvb_gpio     = terratec_cinergy_USB_XS_FR_digital,
 926                 .input        = { {
 927                         .type     = EM28XX_VMUX_TELEVISION,
 928                         .vmux     = TVP5150_COMPOSITE0,
 929                         .amux     = EM28XX_AMUX_VIDEO,
 930                         .gpio     = terratec_cinergy_USB_XS_FR_analog,
 931                 }, {
 932                         .type     = EM28XX_VMUX_COMPOSITE1,
 933                         .vmux     = TVP5150_COMPOSITE1,
 934                         .amux     = EM28XX_AMUX_LINE_IN,
 935                         .gpio     = terratec_cinergy_USB_XS_FR_analog,
 936                 }, {
 937                         .type     = EM28XX_VMUX_SVIDEO,
 938                         .vmux     = TVP5150_SVIDEO,
 939                         .amux     = EM28XX_AMUX_LINE_IN,
 940                         .gpio     = terratec_cinergy_USB_XS_FR_analog,
 941                 } },
 942         },
 943         [EM2884_BOARD_TERRATEC_H5] = {
 944                 .name         = "Terratec Cinergy H5",
 945                 .has_dvb      = 1,
 946 #if 0
 947                 .tuner_type   = TUNER_PHILIPS_TDA8290,
 948                 .tuner_addr   = 0x41,
 949                 .dvb_gpio     = terratec_h5_digital, /* FIXME: probably wrong */
 950                 .tuner_gpio   = terratec_h5_gpio,
 951 #else
 952                 .tuner_type   = TUNER_ABSENT,
 953 #endif
 954                 .i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
 955                                 EM28XX_I2C_CLK_WAIT_ENABLE |
 956                                 EM28XX_I2C_FREQ_400_KHZ,
 957         },
 958         [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
 959                 .name         = "Hauppauge WinTV HVR 930C",
 960                 .has_dvb      = 1,
 961 #if 0 /* FIXME: Add analog support */
 962                 .tuner_type   = TUNER_XC5000,
 963                 .tuner_addr   = 0x41,
 964                 .dvb_gpio     = hauppauge_930c_digital,
 965                 .tuner_gpio   = hauppauge_930c_gpio,
 966 #else
 967                 .tuner_type   = TUNER_ABSENT,
 968 #endif
 969                 .ir_codes     = RC_MAP_HAUPPAUGE,
 970                 .i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
 971                                 EM28XX_I2C_CLK_WAIT_ENABLE |
 972                                 EM28XX_I2C_FREQ_400_KHZ,
 973         },
 974         [EM2884_BOARD_CINERGY_HTC_STICK] = {
 975                 .name         = "Terratec Cinergy HTC Stick",
 976                 .has_dvb      = 1,
 977                 .ir_codes     = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 978                 .tuner_type   = TUNER_ABSENT,
 979                 .i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
 980                                 EM28XX_I2C_CLK_WAIT_ENABLE |
 981                                 EM28XX_I2C_FREQ_400_KHZ,
 982         },
 983         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 984                 .name         = "Hauppauge WinTV HVR 900",
 985                 .tda9887_conf = TDA9887_PRESENT,
 986                 .tuner_type   = TUNER_XC2028,
 987                 .tuner_gpio   = default_tuner_gpio,
 988                 .mts_firmware = 1,
 989                 .has_dvb      = 1,
 990                 .dvb_gpio     = hauppauge_wintv_hvr_900_digital,
 991                 .ir_codes     = RC_MAP_HAUPPAUGE,
 992                 .decoder      = EM28XX_TVP5150,
 993                 .input        = { {
 994                         .type     = EM28XX_VMUX_TELEVISION,
 995                         .vmux     = TVP5150_COMPOSITE0,
 996                         .amux     = EM28XX_AMUX_VIDEO,
 997                         .gpio     = hauppauge_wintv_hvr_900_analog,
 998                 }, {
 999                         .type     = EM28XX_VMUX_COMPOSITE1,
1000                         .vmux     = TVP5150_COMPOSITE1,
1001                         .amux     = EM28XX_AMUX_LINE_IN,
1002                         .gpio     = hauppauge_wintv_hvr_900_analog,
1003                 }, {
1004                         .type     = EM28XX_VMUX_SVIDEO,
1005                         .vmux     = TVP5150_SVIDEO,
1006                         .amux     = EM28XX_AMUX_LINE_IN,
1007                         .gpio     = hauppauge_wintv_hvr_900_analog,
1008                 } },
1009         },
1010         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1011                 .name         = "Hauppauge WinTV HVR 900 (R2)",
1012                 .tda9887_conf = TDA9887_PRESENT,
1013                 .tuner_type   = TUNER_XC2028,
1014                 .tuner_gpio   = default_tuner_gpio,
1015                 .mts_firmware = 1,
1016                 .has_dvb      = 1,
1017                 .dvb_gpio     = hauppauge_wintv_hvr_900R2_digital,
1018                 .ir_codes     = RC_MAP_HAUPPAUGE,
1019                 .decoder      = EM28XX_TVP5150,
1020                 .input        = { {
1021                         .type     = EM28XX_VMUX_TELEVISION,
1022                         .vmux     = TVP5150_COMPOSITE0,
1023                         .amux     = EM28XX_AMUX_VIDEO,
1024                         .gpio     = hauppauge_wintv_hvr_900_analog,
1025                 }, {
1026                         .type     = EM28XX_VMUX_COMPOSITE1,
1027                         .vmux     = TVP5150_COMPOSITE1,
1028                         .amux     = EM28XX_AMUX_LINE_IN,
1029                         .gpio     = hauppauge_wintv_hvr_900_analog,
1030                 }, {
1031                         .type     = EM28XX_VMUX_SVIDEO,
1032                         .vmux     = TVP5150_SVIDEO,
1033                         .amux     = EM28XX_AMUX_LINE_IN,
1034                         .gpio     = hauppauge_wintv_hvr_900_analog,
1035                 } },
1036         },
1037         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1038                 .name           = "Hauppauge WinTV HVR 850",
1039                 .tuner_type     = TUNER_XC2028,
1040                 .tuner_gpio     = default_tuner_gpio,
1041                 .mts_firmware   = 1,
1042                 .has_dvb        = 1,
1043                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1044                 .ir_codes       = RC_MAP_HAUPPAUGE,
1045                 .decoder        = EM28XX_TVP5150,
1046                 .input          = { {
1047                         .type     = EM28XX_VMUX_TELEVISION,
1048                         .vmux     = TVP5150_COMPOSITE0,
1049                         .amux     = EM28XX_AMUX_VIDEO,
1050                         .gpio     = hauppauge_wintv_hvr_900_analog,
1051                 }, {
1052                         .type     = EM28XX_VMUX_COMPOSITE1,
1053                         .vmux     = TVP5150_COMPOSITE1,
1054                         .amux     = EM28XX_AMUX_LINE_IN,
1055                         .gpio     = hauppauge_wintv_hvr_900_analog,
1056                 }, {
1057                         .type     = EM28XX_VMUX_SVIDEO,
1058                         .vmux     = TVP5150_SVIDEO,
1059                         .amux     = EM28XX_AMUX_LINE_IN,
1060                         .gpio     = hauppauge_wintv_hvr_900_analog,
1061                 } },
1062         },
1063         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1064                 .name           = "Hauppauge WinTV HVR 950",
1065                 .tuner_type     = TUNER_XC2028,
1066                 .tuner_gpio     = default_tuner_gpio,
1067                 .mts_firmware   = 1,
1068                 .has_dvb        = 1,
1069                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1070                 .ir_codes       = RC_MAP_HAUPPAUGE,
1071                 .decoder        = EM28XX_TVP5150,
1072                 .input          = { {
1073                         .type     = EM28XX_VMUX_TELEVISION,
1074                         .vmux     = TVP5150_COMPOSITE0,
1075                         .amux     = EM28XX_AMUX_VIDEO,
1076                         .gpio     = hauppauge_wintv_hvr_900_analog,
1077                 }, {
1078                         .type     = EM28XX_VMUX_COMPOSITE1,
1079                         .vmux     = TVP5150_COMPOSITE1,
1080                         .amux     = EM28XX_AMUX_LINE_IN,
1081                         .gpio     = hauppauge_wintv_hvr_900_analog,
1082                 }, {
1083                         .type     = EM28XX_VMUX_SVIDEO,
1084                         .vmux     = TVP5150_SVIDEO,
1085                         .amux     = EM28XX_AMUX_LINE_IN,
1086                         .gpio     = hauppauge_wintv_hvr_900_analog,
1087                 } },
1088         },
1089         [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1090                 .name           = "Pinnacle PCTV HD Pro Stick",
1091                 .tuner_type     = TUNER_XC2028,
1092                 .tuner_gpio   = default_tuner_gpio,
1093                 .mts_firmware   = 1,
1094                 .has_dvb        = 1,
1095                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1096                 .ir_codes       = RC_MAP_PINNACLE_PCTV_HD,
1097                 .decoder        = EM28XX_TVP5150,
1098                 .input          = { {
1099                         .type     = EM28XX_VMUX_TELEVISION,
1100                         .vmux     = TVP5150_COMPOSITE0,
1101                         .amux     = EM28XX_AMUX_VIDEO,
1102                         .gpio     = hauppauge_wintv_hvr_900_analog,
1103                 }, {
1104                         .type     = EM28XX_VMUX_COMPOSITE1,
1105                         .vmux     = TVP5150_COMPOSITE1,
1106                         .amux     = EM28XX_AMUX_LINE_IN,
1107                         .gpio     = hauppauge_wintv_hvr_900_analog,
1108                 }, {
1109                         .type     = EM28XX_VMUX_SVIDEO,
1110                         .vmux     = TVP5150_SVIDEO,
1111                         .amux     = EM28XX_AMUX_LINE_IN,
1112                         .gpio     = hauppauge_wintv_hvr_900_analog,
1113                 } },
1114         },
1115         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1116                 .name           = "AMD ATI TV Wonder HD 600",
1117                 .tuner_type     = TUNER_XC2028,
1118                 .tuner_gpio     = default_tuner_gpio,
1119                 .mts_firmware   = 1,
1120                 .has_dvb        = 1,
1121                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
1122                 .ir_codes       = RC_MAP_ATI_TV_WONDER_HD_600,
1123                 .decoder        = EM28XX_TVP5150,
1124                 .input          = { {
1125                         .type     = EM28XX_VMUX_TELEVISION,
1126                         .vmux     = TVP5150_COMPOSITE0,
1127                         .amux     = EM28XX_AMUX_VIDEO,
1128                         .gpio     = hauppauge_wintv_hvr_900_analog,
1129                 }, {
1130                         .type     = EM28XX_VMUX_COMPOSITE1,
1131                         .vmux     = TVP5150_COMPOSITE1,
1132                         .amux     = EM28XX_AMUX_LINE_IN,
1133                         .gpio     = hauppauge_wintv_hvr_900_analog,
1134                 }, {
1135                         .type     = EM28XX_VMUX_SVIDEO,
1136                         .vmux     = TVP5150_SVIDEO,
1137                         .amux     = EM28XX_AMUX_LINE_IN,
1138                         .gpio     = hauppauge_wintv_hvr_900_analog,
1139                 } },
1140         },
1141         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1142                 .name           = "Terratec Hybrid XS",
1143                 .tuner_type     = TUNER_XC2028,
1144                 .tuner_gpio     = default_tuner_gpio,
1145                 .decoder        = EM28XX_TVP5150,
1146                 .has_dvb        = 1,
1147                 .dvb_gpio       = default_digital,
1148                 .ir_codes       = RC_MAP_TERRATEC_CINERGY_XS,
1149                 .xclk           = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1150                 .input          = { {
1151                         .type     = EM28XX_VMUX_TELEVISION,
1152                         .vmux     = TVP5150_COMPOSITE0,
1153                         .amux     = EM28XX_AMUX_VIDEO,
1154                         .gpio     = default_analog,
1155                 }, {
1156                         .type     = EM28XX_VMUX_COMPOSITE1,
1157                         .vmux     = TVP5150_COMPOSITE1,
1158                         .amux     = EM28XX_AMUX_LINE_IN,
1159                         .gpio     = default_analog,
1160                 }, {
1161                         .type     = EM28XX_VMUX_SVIDEO,
1162                         .vmux     = TVP5150_SVIDEO,
1163                         .amux     = EM28XX_AMUX_LINE_IN,
1164                         .gpio     = default_analog,
1165                 } },
1166         },
1167         /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1168            as Prodigy XS with a different PID, let's keep it separated for now
1169            maybe we'll need it lateron */
1170         [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1171                 .name         = "Terratec Prodigy XS",
1172                 .tuner_type   = TUNER_XC2028,
1173                 .tuner_gpio   = default_tuner_gpio,
1174                 .decoder      = EM28XX_TVP5150,
1175                 .input        = { {
1176                         .type     = EM28XX_VMUX_TELEVISION,
1177                         .vmux     = TVP5150_COMPOSITE0,
1178                         .amux     = EM28XX_AMUX_VIDEO,
1179                         .gpio     = hauppauge_wintv_hvr_900_analog,
1180                 }, {
1181                         .type     = EM28XX_VMUX_COMPOSITE1,
1182                         .vmux     = TVP5150_COMPOSITE1,
1183                         .amux     = EM28XX_AMUX_LINE_IN,
1184                         .gpio     = hauppauge_wintv_hvr_900_analog,
1185                 }, {
1186                         .type     = EM28XX_VMUX_SVIDEO,
1187                         .vmux     = TVP5150_SVIDEO,
1188                         .amux     = EM28XX_AMUX_LINE_IN,
1189                         .gpio     = hauppauge_wintv_hvr_900_analog,
1190                 } },
1191         },
1192         [EM2820_BOARD_MSI_VOX_USB_2] = {
1193                 .name              = "MSI VOX USB 2.0",
1194                 .tuner_type        = TUNER_LG_PAL_NEW_TAPC,
1195                 .tda9887_conf      = TDA9887_PRESENT      |
1196                                      TDA9887_PORT1_ACTIVE |
1197                                      TDA9887_PORT2_ACTIVE,
1198                 .max_range_640_480 = 1,
1199                 .decoder           = EM28XX_SAA711X,
1200                 .input             = { {
1201                         .type      = EM28XX_VMUX_TELEVISION,
1202                         .vmux      = SAA7115_COMPOSITE4,
1203                         .amux      = EM28XX_AMUX_VIDEO,
1204                 }, {
1205                         .type      = EM28XX_VMUX_COMPOSITE1,
1206                         .vmux      = SAA7115_COMPOSITE0,
1207                         .amux      = EM28XX_AMUX_LINE_IN,
1208                 }, {
1209                         .type      = EM28XX_VMUX_SVIDEO,
1210                         .vmux      = SAA7115_SVIDEO3,
1211                         .amux      = EM28XX_AMUX_LINE_IN,
1212                 } },
1213         },
1214         [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1215                 .name         = "Terratec Cinergy 200 USB",
1216                 .is_em2800    = 1,
1217                 .has_ir_i2c   = 1,
1218                 .tuner_type   = TUNER_LG_TALN,
1219                 .tda9887_conf = TDA9887_PRESENT,
1220                 .decoder      = EM28XX_SAA711X,
1221                 .input        = { {
1222                         .type     = EM28XX_VMUX_TELEVISION,
1223                         .vmux     = SAA7115_COMPOSITE2,
1224                         .amux     = EM28XX_AMUX_VIDEO,
1225                 }, {
1226                         .type     = EM28XX_VMUX_COMPOSITE1,
1227                         .vmux     = SAA7115_COMPOSITE0,
1228                         .amux     = EM28XX_AMUX_LINE_IN,
1229                 }, {
1230                         .type     = EM28XX_VMUX_SVIDEO,
1231                         .vmux     = SAA7115_SVIDEO3,
1232                         .amux     = EM28XX_AMUX_LINE_IN,
1233                 } },
1234         },
1235         [EM2800_BOARD_GRABBEEX_USB2800] = {
1236                 .name       = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1237                 .is_em2800  = 1,
1238                 .decoder    = EM28XX_SAA711X,
1239                 .tuner_type = TUNER_ABSENT, /* capture only board */
1240                 .input      = { {
1241                         .type     = EM28XX_VMUX_COMPOSITE1,
1242                         .vmux     = SAA7115_COMPOSITE0,
1243                         .amux     = EM28XX_AMUX_LINE_IN,
1244                 }, {
1245                         .type     = EM28XX_VMUX_SVIDEO,
1246                         .vmux     = SAA7115_SVIDEO3,
1247                         .amux     = EM28XX_AMUX_LINE_IN,
1248                 } },
1249         },
1250         [EM2800_BOARD_VC211A] = {
1251                 .name         = "Actionmaster/LinXcel/Digitus VC211A",
1252                 .is_em2800    = 1,
1253                 .tuner_type   = TUNER_ABSENT,   /* Capture-only board */
1254                 .decoder      = EM28XX_SAA711X,
1255                 .input        = { {
1256                         .type     = EM28XX_VMUX_COMPOSITE1,
1257                         .vmux     = SAA7115_COMPOSITE0,
1258                         .amux     = EM28XX_AMUX_LINE_IN,
1259                         .gpio     = vc211a_enable,
1260                 }, {
1261                         .type     = EM28XX_VMUX_SVIDEO,
1262                         .vmux     = SAA7115_SVIDEO3,
1263                         .amux     = EM28XX_AMUX_LINE_IN,
1264                         .gpio     = vc211a_enable,
1265                 } },
1266         },
1267         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1268                 .name         = "Leadtek Winfast USB II",
1269                 .is_em2800    = 1,
1270                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1271                 .tda9887_conf = TDA9887_PRESENT,
1272                 .decoder      = EM28XX_SAA711X,
1273                 .input        = { {
1274                         .type     = EM28XX_VMUX_TELEVISION,
1275                         .vmux     = SAA7115_COMPOSITE2,
1276                         .amux     = EM28XX_AMUX_VIDEO,
1277                 }, {
1278                         .type     = EM28XX_VMUX_COMPOSITE1,
1279                         .vmux     = SAA7115_COMPOSITE0,
1280                         .amux     = EM28XX_AMUX_LINE_IN,
1281                 }, {
1282                         .type     = EM28XX_VMUX_SVIDEO,
1283                         .vmux     = SAA7115_SVIDEO3,
1284                         .amux     = EM28XX_AMUX_LINE_IN,
1285                 } },
1286         },
1287         [EM2800_BOARD_KWORLD_USB2800] = {
1288                 .name         = "Kworld USB2800",
1289                 .is_em2800    = 1,
1290                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
1291                 .tda9887_conf = TDA9887_PRESENT,
1292                 .decoder      = EM28XX_SAA711X,
1293                 .input        = { {
1294                         .type     = EM28XX_VMUX_TELEVISION,
1295                         .vmux     = SAA7115_COMPOSITE2,
1296                         .amux     = EM28XX_AMUX_VIDEO,
1297                 }, {
1298                         .type     = EM28XX_VMUX_COMPOSITE1,
1299                         .vmux     = SAA7115_COMPOSITE0,
1300                         .amux     = EM28XX_AMUX_LINE_IN,
1301                 }, {
1302                         .type     = EM28XX_VMUX_SVIDEO,
1303                         .vmux     = SAA7115_SVIDEO3,
1304                         .amux     = EM28XX_AMUX_LINE_IN,
1305                 } },
1306         },
1307         [EM2820_BOARD_PINNACLE_DVC_90] = {
1308                 .name         = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1309                                "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1310                 .tuner_type   = TUNER_ABSENT, /* capture only board */
1311                 .decoder      = EM28XX_SAA711X,
1312                 .input        = { {
1313                         .type     = EM28XX_VMUX_COMPOSITE1,
1314                         .vmux     = SAA7115_COMPOSITE0,
1315                         .amux     = EM28XX_AMUX_LINE_IN,
1316                 }, {
1317                         .type     = EM28XX_VMUX_SVIDEO,
1318                         .vmux     = SAA7115_SVIDEO3,
1319                         .amux     = EM28XX_AMUX_LINE_IN,
1320                 } },
1321         },
1322         [EM2800_BOARD_VGEAR_POCKETTV] = {
1323                 .name         = "V-Gear PocketTV",
1324                 .is_em2800    = 1,
1325                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1326                 .tda9887_conf = TDA9887_PRESENT,
1327                 .decoder      = EM28XX_SAA711X,
1328                 .input        = { {
1329                         .type     = EM28XX_VMUX_TELEVISION,
1330                         .vmux     = SAA7115_COMPOSITE2,
1331                         .amux     = EM28XX_AMUX_VIDEO,
1332                 }, {
1333                         .type     = EM28XX_VMUX_COMPOSITE1,
1334                         .vmux     = SAA7115_COMPOSITE0,
1335                         .amux     = EM28XX_AMUX_LINE_IN,
1336                 }, {
1337                         .type     = EM28XX_VMUX_SVIDEO,
1338                         .vmux     = SAA7115_SVIDEO3,
1339                         .amux     = EM28XX_AMUX_LINE_IN,
1340                 } },
1341         },
1342         [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1343                 .name         = "Pixelview PlayTV Box 4 USB 2.0",
1344                 .tda9887_conf = TDA9887_PRESENT,
1345                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
1346                 .decoder      = EM28XX_SAA711X,
1347                 .input        = { {
1348                         .type     = EM28XX_VMUX_TELEVISION,
1349                         .vmux     = SAA7115_COMPOSITE2,
1350                         .amux     = EM28XX_AMUX_VIDEO,
1351                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
1352                                     EM28XX_AOUT_MASTER, /* Line out pin */
1353                 }, {
1354                         .type     = EM28XX_VMUX_COMPOSITE1,
1355                         .vmux     = SAA7115_COMPOSITE0,
1356                         .amux     = EM28XX_AMUX_LINE_IN,
1357                 }, {
1358                         .type     = EM28XX_VMUX_SVIDEO,
1359                         .vmux     = SAA7115_SVIDEO3,
1360                         .amux     = EM28XX_AMUX_LINE_IN,
1361                 } },
1362         },
1363         [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1364                 .name         = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1365                 .has_snapshot_button = 1,
1366                 .tda9887_conf = TDA9887_PRESENT,
1367                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
1368                 .decoder      = EM28XX_SAA711X,
1369                 .input        = { {
1370                         .type     = EM28XX_VMUX_TELEVISION,
1371                         .vmux     = SAA7115_COMPOSITE2,
1372                         .amux     = EM28XX_AMUX_VIDEO,
1373                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
1374                                     EM28XX_AOUT_MASTER, /* Line out pin */
1375                 }, {
1376                         .type     = EM28XX_VMUX_COMPOSITE1,
1377                         .vmux     = SAA7115_COMPOSITE0,
1378                         .amux     = EM28XX_AMUX_LINE_IN,
1379                 }, {
1380                         .type     = EM28XX_VMUX_SVIDEO,
1381                         .vmux     = SAA7115_SVIDEO3,
1382                         .amux     = EM28XX_AMUX_LINE_IN,
1383                 } },
1384         },
1385         [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1386                 .name                = "EM2860/SAA711X Reference Design",
1387                 .has_snapshot_button = 1,
1388                 .tuner_type          = TUNER_ABSENT,
1389                 .decoder             = EM28XX_SAA711X,
1390                 .input               = { {
1391                         .type     = EM28XX_VMUX_SVIDEO,
1392                         .vmux     = SAA7115_SVIDEO3,
1393                 }, {
1394                         .type     = EM28XX_VMUX_COMPOSITE1,
1395                         .vmux     = SAA7115_COMPOSITE0,
1396                 } },
1397         },
1398
1399         [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1400                 .i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
1401                                   EM28XX_I2C_CLK_WAIT_ENABLE |
1402                                   EM28XX_I2C_FREQ_100_KHZ,
1403                 .xclk           = EM28XX_XCLK_FREQUENCY_10MHZ,
1404                 .name           = "EM2874 Leadership ISDBT",
1405                 .tuner_type     = TUNER_ABSENT,
1406                 .tuner_gpio     = leadership_reset,
1407                 .dvb_gpio       = leadership_digital,
1408                 .has_dvb        = 1,
1409         },
1410
1411         [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1412                 .name         = "MSI DigiVox A/D",
1413                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1414                 .tuner_type   = TUNER_XC2028,
1415                 .tuner_gpio   = default_tuner_gpio,
1416                 .decoder      = EM28XX_TVP5150,
1417                 .input        = { {
1418                         .type     = EM28XX_VMUX_TELEVISION,
1419                         .vmux     = TVP5150_COMPOSITE0,
1420                         .amux     = EM28XX_AMUX_VIDEO,
1421                         .gpio     = em2880_msi_digivox_ad_analog,
1422                 }, {
1423                         .type     = EM28XX_VMUX_COMPOSITE1,
1424                         .vmux     = TVP5150_COMPOSITE1,
1425                         .amux     = EM28XX_AMUX_LINE_IN,
1426                         .gpio     = em2880_msi_digivox_ad_analog,
1427                 }, {
1428                         .type     = EM28XX_VMUX_SVIDEO,
1429                         .vmux     = TVP5150_SVIDEO,
1430                         .amux     = EM28XX_AMUX_LINE_IN,
1431                         .gpio     = em2880_msi_digivox_ad_analog,
1432                 } },
1433         },
1434         [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1435                 .name         = "MSI DigiVox A/D II",
1436                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1437                 .tuner_type   = TUNER_XC2028,
1438                 .tuner_gpio   = default_tuner_gpio,
1439                 .decoder      = EM28XX_TVP5150,
1440                 .input        = { {
1441                         .type     = EM28XX_VMUX_TELEVISION,
1442                         .vmux     = TVP5150_COMPOSITE0,
1443                         .amux     = EM28XX_AMUX_VIDEO,
1444                         .gpio     = em2880_msi_digivox_ad_analog,
1445                 }, {
1446                         .type     = EM28XX_VMUX_COMPOSITE1,
1447                         .vmux     = TVP5150_COMPOSITE1,
1448                         .amux     = EM28XX_AMUX_LINE_IN,
1449                         .gpio     = em2880_msi_digivox_ad_analog,
1450                 }, {
1451                         .type     = EM28XX_VMUX_SVIDEO,
1452                         .vmux     = TVP5150_SVIDEO,
1453                         .amux     = EM28XX_AMUX_LINE_IN,
1454                         .gpio     = em2880_msi_digivox_ad_analog,
1455                 } },
1456         },
1457         [EM2880_BOARD_KWORLD_DVB_305U] = {
1458                 .name         = "KWorld DVB-T 305U",
1459                 .tuner_type   = TUNER_XC2028,
1460                 .tuner_gpio   = default_tuner_gpio,
1461                 .decoder      = EM28XX_TVP5150,
1462                 .input        = { {
1463                         .type     = EM28XX_VMUX_TELEVISION,
1464                         .vmux     = TVP5150_COMPOSITE0,
1465                         .amux     = EM28XX_AMUX_VIDEO,
1466                 }, {
1467                         .type     = EM28XX_VMUX_COMPOSITE1,
1468                         .vmux     = TVP5150_COMPOSITE1,
1469                         .amux     = EM28XX_AMUX_LINE_IN,
1470                 }, {
1471                         .type     = EM28XX_VMUX_SVIDEO,
1472                         .vmux     = TVP5150_SVIDEO,
1473                         .amux     = EM28XX_AMUX_LINE_IN,
1474                 } },
1475         },
1476         [EM2880_BOARD_KWORLD_DVB_310U] = {
1477                 .name         = "KWorld DVB-T 310U",
1478                 .tuner_type   = TUNER_XC2028,
1479                 .tuner_gpio   = default_tuner_gpio,
1480                 .has_dvb      = 1,
1481                 .dvb_gpio     = default_digital,
1482                 .mts_firmware = 1,
1483                 .decoder      = EM28XX_TVP5150,
1484                 .input        = { {
1485                         .type     = EM28XX_VMUX_TELEVISION,
1486                         .vmux     = TVP5150_COMPOSITE0,
1487                         .amux     = EM28XX_AMUX_VIDEO,
1488                         .gpio     = default_analog,
1489                 }, {
1490                         .type     = EM28XX_VMUX_COMPOSITE1,
1491                         .vmux     = TVP5150_COMPOSITE1,
1492                         .amux     = EM28XX_AMUX_LINE_IN,
1493                         .gpio     = default_analog,
1494                 }, {    /* S-video has not been tested yet */
1495                         .type     = EM28XX_VMUX_SVIDEO,
1496                         .vmux     = TVP5150_SVIDEO,
1497                         .amux     = EM28XX_AMUX_LINE_IN,
1498                         .gpio     = default_analog,
1499                 } },
1500         },
1501         [EM2882_BOARD_KWORLD_ATSC_315U] = {
1502                 .name           = "KWorld ATSC 315U HDTV TV Box",
1503                 .valid          = EM28XX_BOARD_NOT_VALIDATED,
1504                 .tuner_type     = TUNER_THOMSON_DTT761X,
1505                 .tuner_gpio     = em2882_kworld_315u_tuner_gpio,
1506                 .tda9887_conf   = TDA9887_PRESENT,
1507                 .decoder        = EM28XX_SAA711X,
1508                 .has_dvb        = 1,
1509                 .dvb_gpio       = em2882_kworld_315u_digital,
1510                 .ir_codes       = RC_MAP_KWORLD_315U,
1511                 .xclk           = EM28XX_XCLK_FREQUENCY_12MHZ,
1512                 .i2c_speed      = EM28XX_I2C_CLK_WAIT_ENABLE,
1513                 /* Analog mode - still not ready */
1514                 /*.input        = { {
1515                         .type = EM28XX_VMUX_TELEVISION,
1516                         .vmux = SAA7115_COMPOSITE2,
1517                         .amux = EM28XX_AMUX_VIDEO,
1518                         .gpio = em2882_kworld_315u_analog,
1519                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1520                 }, {
1521                         .type = EM28XX_VMUX_COMPOSITE1,
1522                         .vmux = SAA7115_COMPOSITE0,
1523                         .amux = EM28XX_AMUX_LINE_IN,
1524                         .gpio = em2882_kworld_315u_analog1,
1525                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1526                 }, {
1527                         .type = EM28XX_VMUX_SVIDEO,
1528                         .vmux = SAA7115_SVIDEO3,
1529                         .amux = EM28XX_AMUX_LINE_IN,
1530                         .gpio = em2882_kworld_315u_analog1,
1531                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1532                 } }, */
1533         },
1534         [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1535                 .name = "Empire dual TV",
1536                 .tuner_type = TUNER_XC2028,
1537                 .tuner_gpio = default_tuner_gpio,
1538                 .has_dvb = 1,
1539                 .dvb_gpio = default_digital,
1540                 .mts_firmware = 1,
1541                 .decoder = EM28XX_TVP5150,
1542                 .input = { {
1543                         .type = EM28XX_VMUX_TELEVISION,
1544                         .vmux = TVP5150_COMPOSITE0,
1545                         .amux = EM28XX_AMUX_VIDEO,
1546                         .gpio = default_analog,
1547                 }, {
1548                         .type = EM28XX_VMUX_COMPOSITE1,
1549                         .vmux = TVP5150_COMPOSITE1,
1550                         .amux = EM28XX_AMUX_LINE_IN,
1551                         .gpio = default_analog,
1552                 }, {
1553                         .type = EM28XX_VMUX_SVIDEO,
1554                         .vmux = TVP5150_SVIDEO,
1555                         .amux = EM28XX_AMUX_LINE_IN,
1556                         .gpio = default_analog,
1557                 } },
1558         },
1559         [EM2881_BOARD_DNT_DA2_HYBRID] = {
1560                 .name         = "DNT DA2 Hybrid",
1561                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1562                 .tuner_type   = TUNER_XC2028,
1563                 .tuner_gpio   = default_tuner_gpio,
1564                 .decoder      = EM28XX_TVP5150,
1565                 .input        = { {
1566                         .type     = EM28XX_VMUX_TELEVISION,
1567                         .vmux     = TVP5150_COMPOSITE0,
1568                         .amux     = EM28XX_AMUX_VIDEO,
1569                         .gpio     = default_analog,
1570                 }, {
1571                         .type     = EM28XX_VMUX_COMPOSITE1,
1572                         .vmux     = TVP5150_COMPOSITE1,
1573                         .amux     = EM28XX_AMUX_LINE_IN,
1574                         .gpio     = default_analog,
1575                 }, {
1576                         .type     = EM28XX_VMUX_SVIDEO,
1577                         .vmux     = TVP5150_SVIDEO,
1578                         .amux     = EM28XX_AMUX_LINE_IN,
1579                         .gpio     = default_analog,
1580                 } },
1581         },
1582         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1583                 .name         = "Pinnacle Hybrid Pro",
1584                 .tuner_type   = TUNER_XC2028,
1585                 .tuner_gpio   = default_tuner_gpio,
1586                 .decoder      = EM28XX_TVP5150,
1587                 .has_dvb      = 1,
1588                 .dvb_gpio     = pinnacle_hybrid_pro_digital,
1589                 .input        = { {
1590                         .type     = EM28XX_VMUX_TELEVISION,
1591                         .vmux     = TVP5150_COMPOSITE0,
1592                         .amux     = EM28XX_AMUX_VIDEO,
1593                         .gpio     = pinnacle_hybrid_pro_analog,
1594                 }, {
1595                         .type     = EM28XX_VMUX_COMPOSITE1,
1596                         .vmux     = TVP5150_COMPOSITE1,
1597                         .amux     = EM28XX_AMUX_LINE_IN,
1598                         .gpio     = pinnacle_hybrid_pro_analog,
1599                 }, {
1600                         .type     = EM28XX_VMUX_SVIDEO,
1601                         .vmux     = TVP5150_SVIDEO,
1602                         .amux     = EM28XX_AMUX_LINE_IN,
1603                         .gpio     = pinnacle_hybrid_pro_analog,
1604                 } },
1605         },
1606         [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1607                 .name         = "Pinnacle Hybrid Pro (330e)",
1608                 .tuner_type   = TUNER_XC2028,
1609                 .tuner_gpio   = default_tuner_gpio,
1610                 .mts_firmware = 1,
1611                 .has_dvb      = 1,
1612                 .dvb_gpio     = hauppauge_wintv_hvr_900R2_digital,
1613                 .ir_codes     = RC_MAP_PINNACLE_PCTV_HD,
1614                 .decoder      = EM28XX_TVP5150,
1615                 .input        = { {
1616                         .type     = EM28XX_VMUX_TELEVISION,
1617                         .vmux     = TVP5150_COMPOSITE0,
1618                         .amux     = EM28XX_AMUX_VIDEO,
1619                         .gpio     = hauppauge_wintv_hvr_900_analog,
1620                 }, {
1621                         .type     = EM28XX_VMUX_COMPOSITE1,
1622                         .vmux     = TVP5150_COMPOSITE1,
1623                         .amux     = EM28XX_AMUX_LINE_IN,
1624                         .gpio     = hauppauge_wintv_hvr_900_analog,
1625                 }, {
1626                         .type     = EM28XX_VMUX_SVIDEO,
1627                         .vmux     = TVP5150_SVIDEO,
1628                         .amux     = EM28XX_AMUX_LINE_IN,
1629                         .gpio     = hauppauge_wintv_hvr_900_analog,
1630                 } },
1631         },
1632         [EM2882_BOARD_KWORLD_VS_DVBT] = {
1633                 .name         = "Kworld VS-DVB-T 323UR",
1634                 .tuner_type   = TUNER_XC2028,
1635                 .tuner_gpio   = default_tuner_gpio,
1636                 .decoder      = EM28XX_TVP5150,
1637                 .mts_firmware = 1,
1638                 .has_dvb      = 1,
1639                 .dvb_gpio     = kworld_330u_digital,
1640                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1641                 .ir_codes     = RC_MAP_KWORLD_315U,
1642                 .input        = { {
1643                         .type     = EM28XX_VMUX_TELEVISION,
1644                         .vmux     = TVP5150_COMPOSITE0,
1645                         .amux     = EM28XX_AMUX_VIDEO,
1646                 }, {
1647                         .type     = EM28XX_VMUX_COMPOSITE1,
1648                         .vmux     = TVP5150_COMPOSITE1,
1649                         .amux     = EM28XX_AMUX_LINE_IN,
1650                 }, {
1651                         .type     = EM28XX_VMUX_SVIDEO,
1652                         .vmux     = TVP5150_SVIDEO,
1653                         .amux     = EM28XX_AMUX_LINE_IN,
1654                 } },
1655         },
1656         [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1657                 .name         = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1658                 .tuner_type   = TUNER_XC2028,
1659                 .tuner_gpio   = default_tuner_gpio,
1660                 .mts_firmware = 1,
1661                 .decoder      = EM28XX_TVP5150,
1662                 .has_dvb      = 1,
1663                 .dvb_gpio     = hauppauge_wintv_hvr_900_digital,
1664                 .ir_codes     = RC_MAP_TERRATEC_CINERGY_XS,
1665                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
1666                 .input        = { {
1667                         .type     = EM28XX_VMUX_TELEVISION,
1668                         .vmux     = TVP5150_COMPOSITE0,
1669                         .amux     = EM28XX_AMUX_VIDEO,
1670                         .gpio     = hauppauge_wintv_hvr_900_analog,
1671                 }, {
1672                         .type     = EM28XX_VMUX_COMPOSITE1,
1673                         .vmux     = TVP5150_COMPOSITE1,
1674                         .amux     = EM28XX_AMUX_LINE_IN,
1675                         .gpio     = hauppauge_wintv_hvr_900_analog,
1676                 }, {
1677                         .type     = EM28XX_VMUX_SVIDEO,
1678                         .vmux     = TVP5150_SVIDEO,
1679                         .amux     = EM28XX_AMUX_LINE_IN,
1680                         .gpio     = hauppauge_wintv_hvr_900_analog,
1681                 } },
1682         },
1683         [EM2882_BOARD_DIKOM_DK300] = {
1684                 .name         = "Dikom DK300",
1685                 .tuner_type   = TUNER_XC2028,
1686                 .tuner_gpio   = default_tuner_gpio,
1687                 .decoder      = EM28XX_TVP5150,
1688                 .mts_firmware = 1,
1689                 .has_dvb      = 1,
1690                 .dvb_gpio     = dikom_dk300_digital,
1691                 .input        = { {
1692                         .type     = EM28XX_VMUX_TELEVISION,
1693                         .vmux     = TVP5150_COMPOSITE0,
1694                         .amux     = EM28XX_AMUX_VIDEO,
1695                         .gpio     = default_analog,
1696                 } },
1697         },
1698         [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1699                 .name         = "Kworld PlusTV HD Hybrid 330",
1700                 .tuner_type   = TUNER_XC2028,
1701                 .tuner_gpio   = default_tuner_gpio,
1702                 .decoder      = EM28XX_TVP5150,
1703                 .mts_firmware = 1,
1704                 .has_dvb      = 1,
1705                 .dvb_gpio     = kworld_330u_digital,
1706                 .xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
1707                 .i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE |
1708                                     EM28XX_I2C_EEPROM_ON_BOARD |
1709                                     EM28XX_I2C_EEPROM_KEY_VALID,
1710                 .input        = { {
1711                         .type     = EM28XX_VMUX_TELEVISION,
1712                         .vmux     = TVP5150_COMPOSITE0,
1713                         .amux     = EM28XX_AMUX_VIDEO,
1714                         .gpio     = kworld_330u_analog,
1715                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1716                 }, {
1717                         .type     = EM28XX_VMUX_COMPOSITE1,
1718                         .vmux     = TVP5150_COMPOSITE1,
1719                         .amux     = EM28XX_AMUX_LINE_IN,
1720                         .gpio     = kworld_330u_analog,
1721                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1722                 }, {
1723                         .type     = EM28XX_VMUX_SVIDEO,
1724                         .vmux     = TVP5150_SVIDEO,
1725                         .amux     = EM28XX_AMUX_LINE_IN,
1726                         .gpio     = kworld_330u_analog,
1727                 } },
1728         },
1729         [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1730                 .name         = "Compro VideoMate ForYou/Stereo",
1731                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1732                 .tvaudio_addr = 0xb0,
1733                 .tda9887_conf = TDA9887_PRESENT,
1734                 .decoder      = EM28XX_TVP5150,
1735                 .adecoder     = EM28XX_TVAUDIO,
1736                 .mute_gpio    = compro_mute_gpio,
1737                 .input        = { {
1738                         .type     = EM28XX_VMUX_TELEVISION,
1739                         .vmux     = TVP5150_COMPOSITE0,
1740                         .amux     = EM28XX_AMUX_VIDEO,
1741                         .gpio     = compro_unmute_tv_gpio,
1742                 }, {
1743                         .type     = EM28XX_VMUX_SVIDEO,
1744                         .vmux     = TVP5150_SVIDEO,
1745                         .amux     = EM28XX_AMUX_LINE_IN,
1746                         .gpio     = compro_unmute_svid_gpio,
1747                 } },
1748         },
1749         [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1750                 .name         = "Kaiomy TVnPC U2",
1751                 .vchannels    = 3,
1752                 .tuner_type   = TUNER_XC2028,
1753                 .tuner_addr   = 0x61,
1754                 .mts_firmware = 1,
1755                 .decoder      = EM28XX_TVP5150,
1756                 .tuner_gpio   = default_tuner_gpio,
1757                 .ir_codes     = RC_MAP_KAIOMY,
1758                 .input          = { {
1759                         .type     = EM28XX_VMUX_TELEVISION,
1760                         .vmux     = TVP5150_COMPOSITE0,
1761                         .amux     = EM28XX_AMUX_VIDEO,
1762
1763                 }, {
1764                         .type     = EM28XX_VMUX_COMPOSITE1,
1765                         .vmux     = TVP5150_COMPOSITE1,
1766                         .amux     = EM28XX_AMUX_LINE_IN,
1767                 }, {
1768                         .type     = EM28XX_VMUX_SVIDEO,
1769                         .vmux     = TVP5150_SVIDEO,
1770                         .amux     = EM28XX_AMUX_LINE_IN,
1771                 } },
1772                 .radio          = {
1773                         .type     = EM28XX_RADIO,
1774                         .amux     = EM28XX_AMUX_LINE_IN,
1775                 }
1776         },
1777         [EM2860_BOARD_EASYCAP] = {
1778                 .name         = "Easy Cap Capture DC-60",
1779                 .vchannels    = 2,
1780                 .tuner_type   = TUNER_ABSENT,
1781                 .decoder      = EM28XX_SAA711X,
1782                 .input           = { {
1783                         .type     = EM28XX_VMUX_COMPOSITE1,
1784                         .vmux     = SAA7115_COMPOSITE0,
1785                         .amux     = EM28XX_AMUX_LINE_IN,
1786                 }, {
1787                         .type     = EM28XX_VMUX_SVIDEO,
1788                         .vmux     = SAA7115_SVIDEO3,
1789                         .amux     = EM28XX_AMUX_LINE_IN,
1790                 } },
1791         },
1792         [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1793                 .name       = "IO-DATA GV-MVP/SZ",
1794                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
1795                 .tuner_gpio   = default_tuner_gpio,
1796                 .tda9887_conf = TDA9887_PRESENT,
1797                 .decoder      = EM28XX_TVP5150,
1798                 .input        = { {
1799                         .type     = EM28XX_VMUX_TELEVISION,
1800                         .vmux     = TVP5150_COMPOSITE0,
1801                         .amux     = EM28XX_AMUX_VIDEO,
1802                 }, { /* Composite has not been tested yet */
1803                         .type     = EM28XX_VMUX_COMPOSITE1,
1804                         .vmux     = TVP5150_COMPOSITE1,
1805                         .amux     = EM28XX_AMUX_VIDEO,
1806                 }, { /* S-video has not been tested yet */
1807                         .type     = EM28XX_VMUX_SVIDEO,
1808                         .vmux     = TVP5150_SVIDEO,
1809                         .amux     = EM28XX_AMUX_VIDEO,
1810                 } },
1811         },
1812         [EM2860_BOARD_TERRATEC_GRABBY] = {
1813                 .name            = "Terratec Grabby",
1814                 .vchannels       = 2,
1815                 .tuner_type      = TUNER_ABSENT,
1816                 .decoder         = EM28XX_SAA711X,
1817                 .xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
1818                 .input           = { {
1819                         .type     = EM28XX_VMUX_COMPOSITE1,
1820                         .vmux     = SAA7115_COMPOSITE0,
1821                         .amux     = EM28XX_AMUX_LINE_IN,
1822                 }, {
1823                         .type     = EM28XX_VMUX_SVIDEO,
1824                         .vmux     = SAA7115_SVIDEO3,
1825                         .amux     = EM28XX_AMUX_LINE_IN,
1826                 } },
1827         },
1828         [EM2860_BOARD_TERRATEC_AV350] = {
1829                 .name            = "Terratec AV350",
1830                 .vchannels       = 2,
1831                 .tuner_type      = TUNER_ABSENT,
1832                 .decoder         = EM28XX_TVP5150,
1833                 .xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
1834                 .mute_gpio       = terratec_av350_mute_gpio,
1835                 .input           = { {
1836                         .type     = EM28XX_VMUX_COMPOSITE1,
1837                         .vmux     = TVP5150_COMPOSITE1,
1838                         .amux     = EM28XX_AUDIO_SRC_LINE,
1839                         .gpio     = terratec_av350_unmute_gpio,
1840
1841                 }, {
1842                         .type     = EM28XX_VMUX_SVIDEO,
1843                         .vmux     = TVP5150_SVIDEO,
1844                         .amux     = EM28XX_AUDIO_SRC_LINE,
1845                         .gpio     = terratec_av350_unmute_gpio,
1846                 } },
1847         },
1848
1849         [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
1850                 .name         = "Elgato Video Capture",
1851                 .decoder      = EM28XX_SAA711X,
1852                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
1853                 .input        = { {
1854                         .type  = EM28XX_VMUX_COMPOSITE1,
1855                         .vmux  = SAA7115_COMPOSITE0,
1856                         .amux  = EM28XX_AMUX_LINE_IN,
1857                 }, {
1858                         .type  = EM28XX_VMUX_SVIDEO,
1859                         .vmux  = SAA7115_SVIDEO3,
1860                         .amux  = EM28XX_AMUX_LINE_IN,
1861                 } },
1862         },
1863
1864         [EM2882_BOARD_EVGA_INDTUBE] = {
1865                 .name         = "Evga inDtube",
1866                 .tuner_type   = TUNER_XC2028,
1867                 .tuner_gpio   = default_tuner_gpio,
1868                 .decoder      = EM28XX_TVP5150,
1869                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1870                 .mts_firmware = 1,
1871                 .has_dvb      = 1,
1872                 .dvb_gpio     = evga_indtube_digital,
1873                 .ir_codes     = RC_MAP_EVGA_INDTUBE,
1874                 .input        = { {
1875                         .type     = EM28XX_VMUX_TELEVISION,
1876                         .vmux     = TVP5150_COMPOSITE0,
1877                         .amux     = EM28XX_AMUX_VIDEO,
1878                         .gpio     = evga_indtube_analog,
1879                 }, {
1880                         .type     = EM28XX_VMUX_COMPOSITE1,
1881                         .vmux     = TVP5150_COMPOSITE1,
1882                         .amux     = EM28XX_AMUX_LINE_IN,
1883                         .gpio     = evga_indtube_analog,
1884                 }, {
1885                         .type     = EM28XX_VMUX_SVIDEO,
1886                         .vmux     = TVP5150_SVIDEO,
1887                         .amux     = EM28XX_AMUX_LINE_IN,
1888                         .gpio     = evga_indtube_analog,
1889                 } },
1890         },
1891         /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1892            Infineon TUA6034) */
1893         [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1894                 .name          = "Reddo DVB-C USB TV Box",
1895                 .tuner_type    = TUNER_ABSENT,
1896                 .tuner_gpio    = reddo_dvb_c_usb_box,
1897                 .has_dvb       = 1,
1898         },
1899         /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
1900          * initially as the KWorld PlusTV 340U, then as the UB435-Q.
1901          * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
1902         [EM2870_BOARD_KWORLD_A340] = {
1903                 .name       = "KWorld PlusTV 340U or UB435-Q (ATSC)",
1904                 .tuner_type = TUNER_ABSENT,     /* Digital-only TDA18271HD */
1905                 .has_dvb    = 1,
1906                 .dvb_gpio   = kworld_a340_digital,
1907                 .tuner_gpio = default_tuner_gpio,
1908         },
1909         /* 2013:024f PCTV nanoStick T2 290e.
1910          * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
1911         [EM28174_BOARD_PCTV_290E] = {
1912                 .name          = "PCTV nanoStick T2 290e",
1913                 .i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
1914                         EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
1915                 .tuner_type    = TUNER_ABSENT,
1916                 .tuner_gpio    = pctv_290e,
1917                 .has_dvb       = 1,
1918                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1919         },
1920         /* 2013:024f PCTV DVB-S2 Stick 460e
1921          * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
1922         [EM28174_BOARD_PCTV_460E] = {
1923                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1924                         EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
1925                 .name          = "PCTV DVB-S2 Stick (460e)",
1926                 .tuner_type    = TUNER_ABSENT,
1927                 .tuner_gpio    = pctv_460e,
1928                 .has_dvb       = 1,
1929                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1930         },
1931         /* eb1a:5006 Honestech VIDBOX NW03
1932          * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
1933         [EM2860_BOARD_HT_VIDBOX_NW03] = {
1934                 .name                = "Honestech Vidbox NW03",
1935                 .tuner_type          = TUNER_ABSENT,
1936                 .decoder             = EM28XX_SAA711X,
1937                 .input               = { {
1938                         .type     = EM28XX_VMUX_COMPOSITE1,
1939                         .vmux     = SAA7115_COMPOSITE0,
1940                         .amux     = EM28XX_AMUX_LINE_IN,
1941                 }, {
1942                         .type     = EM28XX_VMUX_SVIDEO,
1943                         .vmux     = SAA7115_SVIDEO3,  /* S-VIDEO needs confirming */
1944                         .amux     = EM28XX_AMUX_LINE_IN,
1945                 } },
1946         },
1947         /* 1b80:e425 MaxMedia UB425-TC
1948          * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
1949         [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
1950                 .name          = "MaxMedia UB425-TC",
1951                 .tuner_type    = TUNER_ABSENT,
1952                 .tuner_gpio    = maxmedia_ub425_tc,
1953                 .has_dvb       = 1,
1954                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1955                                 EM28XX_I2C_CLK_WAIT_ENABLE |
1956                                 EM28XX_I2C_FREQ_400_KHZ,
1957         },
1958         /* 2304:0242 PCTV QuatroStick (510e)
1959          * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1960         [EM2884_BOARD_PCTV_510E] = {
1961                 .name          = "PCTV QuatroStick (510e)",
1962                 .tuner_type    = TUNER_ABSENT,
1963                 .tuner_gpio    = pctv_510e,
1964                 .has_dvb       = 1,
1965                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1966                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1967                                 EM28XX_I2C_CLK_WAIT_ENABLE |
1968                                 EM28XX_I2C_FREQ_400_KHZ,
1969         },
1970         /* 2013:0251 PCTV QuatroStick nano (520e)
1971          * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1972         [EM2884_BOARD_PCTV_520E] = {
1973                 .name          = "PCTV QuatroStick nano (520e)",
1974                 .tuner_type    = TUNER_ABSENT,
1975                 .tuner_gpio    = pctv_520e,
1976                 .has_dvb       = 1,
1977                 .ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
1978                 .i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
1979                                 EM28XX_I2C_CLK_WAIT_ENABLE |
1980                                 EM28XX_I2C_FREQ_400_KHZ,
1981         },
1982 };
1983 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1984
1985 /* table of devices that work with this driver */
1986 struct usb_device_id em28xx_id_table[] = {
1987         { USB_DEVICE(0xeb1a, 0x2750),
1988                         .driver_info = EM2750_BOARD_UNKNOWN },
1989         { USB_DEVICE(0xeb1a, 0x2751),
1990                         .driver_info = EM2750_BOARD_UNKNOWN },
1991         { USB_DEVICE(0xeb1a, 0x2800),
1992                         .driver_info = EM2800_BOARD_UNKNOWN },
1993         { USB_DEVICE(0xeb1a, 0x2710),
1994                         .driver_info = EM2820_BOARD_UNKNOWN },
1995         { USB_DEVICE(0xeb1a, 0x2820),
1996                         .driver_info = EM2820_BOARD_UNKNOWN },
1997         { USB_DEVICE(0xeb1a, 0x2821),
1998                         .driver_info = EM2820_BOARD_UNKNOWN },
1999         { USB_DEVICE(0xeb1a, 0x2860),
2000                         .driver_info = EM2820_BOARD_UNKNOWN },
2001         { USB_DEVICE(0xeb1a, 0x2861),
2002                         .driver_info = EM2820_BOARD_UNKNOWN },
2003         { USB_DEVICE(0xeb1a, 0x2862),
2004                         .driver_info = EM2820_BOARD_UNKNOWN },
2005         { USB_DEVICE(0xeb1a, 0x2863),
2006                         .driver_info = EM2820_BOARD_UNKNOWN },
2007         { USB_DEVICE(0xeb1a, 0x2870),
2008                         .driver_info = EM2820_BOARD_UNKNOWN },
2009         { USB_DEVICE(0xeb1a, 0x2881),
2010                         .driver_info = EM2820_BOARD_UNKNOWN },
2011         { USB_DEVICE(0xeb1a, 0x2883),
2012                         .driver_info = EM2820_BOARD_UNKNOWN },
2013         { USB_DEVICE(0xeb1a, 0x2868),
2014                         .driver_info = EM2820_BOARD_UNKNOWN },
2015         { USB_DEVICE(0xeb1a, 0x2875),
2016                         .driver_info = EM2820_BOARD_UNKNOWN },
2017         { USB_DEVICE(0xeb1a, 0xe300),
2018                         .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2019         { USB_DEVICE(0xeb1a, 0xe303),
2020                         .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2021         { USB_DEVICE(0xeb1a, 0xe305),
2022                         .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2023         { USB_DEVICE(0xeb1a, 0xe310),
2024                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2025         { USB_DEVICE(0xeb1a, 0xa313),
2026                 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2027         { USB_DEVICE(0xeb1a, 0xa316),
2028                         .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2029         { USB_DEVICE(0xeb1a, 0xe320),
2030                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2031         { USB_DEVICE(0xeb1a, 0xe323),
2032                         .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2033         { USB_DEVICE(0xeb1a, 0xe350),
2034                         .driver_info = EM2870_BOARD_KWORLD_350U },
2035         { USB_DEVICE(0xeb1a, 0xe355),
2036                         .driver_info = EM2870_BOARD_KWORLD_355U },
2037         { USB_DEVICE(0xeb1a, 0x2801),
2038                         .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2039         { USB_DEVICE(0xeb1a, 0xe357),
2040                         .driver_info = EM2870_BOARD_KWORLD_355U },
2041         { USB_DEVICE(0xeb1a, 0xe359),
2042                         .driver_info = EM2870_BOARD_KWORLD_355U },
2043         { USB_DEVICE(0x1b80, 0xe302),
2044                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
2045         { USB_DEVICE(0x1b80, 0xe304),
2046                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
2047         { USB_DEVICE(0x0ccd, 0x0036),
2048                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2049         { USB_DEVICE(0x0ccd, 0x004c),
2050                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2051         { USB_DEVICE(0x0ccd, 0x004f),
2052                         .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2053         { USB_DEVICE(0x0ccd, 0x005e),
2054                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2055         { USB_DEVICE(0x0ccd, 0x0042),
2056                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2057         { USB_DEVICE(0x0ccd, 0x0043),
2058                         .driver_info = EM2870_BOARD_TERRATEC_XS },
2059         { USB_DEVICE(0x0ccd, 0x008e),   /* Cinergy HTC USB XS Rev. 1 */
2060                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2061         { USB_DEVICE(0x0ccd, 0x00ac),   /* Cinergy HTC USB XS Rev. 2 */
2062                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2063         { USB_DEVICE(0x0ccd, 0x10a2),   /* H5 Rev. 1 */
2064                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2065         { USB_DEVICE(0x0ccd, 0x10ad),   /* H5 Rev. 2 */
2066                         .driver_info = EM2884_BOARD_TERRATEC_H5 },
2067         { USB_DEVICE(0x0ccd, 0x0084),
2068                         .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2069         { USB_DEVICE(0x0ccd, 0x0096),
2070                         .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2071         { USB_DEVICE(0x0ccd, 0x10AF),
2072                         .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2073         { USB_DEVICE(0x0ccd, 0x00b2),
2074                         .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2075         { USB_DEVICE(0x0fd9, 0x0033),
2076                         .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
2077         { USB_DEVICE(0x185b, 0x2870),
2078                         .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2079         { USB_DEVICE(0x185b, 0x2041),
2080                         .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2081         { USB_DEVICE(0x2040, 0x4200),
2082                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2083         { USB_DEVICE(0x2040, 0x4201),
2084                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2085         { USB_DEVICE(0x2040, 0x6500),
2086                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2087         { USB_DEVICE(0x2040, 0x6502),
2088                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2089         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2090                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2091         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
2092                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2093         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
2094                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2095         { USB_DEVICE(0x2040, 0x651f),
2096                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2097         { USB_DEVICE(0x0438, 0xb002),
2098                         .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2099         { USB_DEVICE(0x2001, 0xf112),
2100                         .driver_info = EM2820_BOARD_DLINK_USB_TV },
2101         { USB_DEVICE(0x2304, 0x0207),
2102                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2103         { USB_DEVICE(0x2304, 0x0208),
2104                         .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2105         { USB_DEVICE(0x2304, 0x021a),
2106                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2107         { USB_DEVICE(0x2304, 0x0226),
2108                         .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2109         { USB_DEVICE(0x2304, 0x0227),
2110                         .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2111         { USB_DEVICE(0x0413, 0x6023),
2112                         .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2113         { USB_DEVICE(0x093b, 0xa003),
2114                        .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2115         { USB_DEVICE(0x093b, 0xa005),
2116                         .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2117         { USB_DEVICE(0x04bb, 0x0515),
2118                         .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2119         { USB_DEVICE(0xeb1a, 0x50a6),
2120                         .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2121         { USB_DEVICE(0x1b80, 0xa340),
2122                         .driver_info = EM2870_BOARD_KWORLD_A340 },
2123         { USB_DEVICE(0x2013, 0x024f),
2124                         .driver_info = EM28174_BOARD_PCTV_290E },
2125         { USB_DEVICE(0x2013, 0x024c),
2126                         .driver_info = EM28174_BOARD_PCTV_460E },
2127         { USB_DEVICE(0x2040, 0x1605),
2128                         .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2129         { USB_DEVICE(0xeb1a, 0x5006),
2130                         .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2131         { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2132                         .driver_info = EM2860_BOARD_EASYCAP },
2133         { USB_DEVICE(0x1b80, 0xe425),
2134                         .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2135         { USB_DEVICE(0x2304, 0x0242),
2136                         .driver_info = EM2884_BOARD_PCTV_510E },
2137         { USB_DEVICE(0x2013, 0x0251),
2138                         .driver_info = EM2884_BOARD_PCTV_520E },
2139         { },
2140 };
2141 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2142
2143 /*
2144  * EEPROM hash table for devices with generic USB IDs
2145  */
2146 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
2147         /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2148         {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2149         {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2150         {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2151         {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2152         {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2153         {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2154         {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2155         {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2156 };
2157
2158 /* I2C devicelist hash table for devices with generic USB IDs */
2159 static struct em28xx_hash_table em28xx_i2c_hash[] = {
2160         {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2161         {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2162         {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2163         {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2164         {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2165         {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2166         {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2167 };
2168
2169 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
2170 static unsigned short saa711x_addrs[] = {
2171         0x4a >> 1, 0x48 >> 1,   /* SAA7111, SAA7111A and SAA7113 */
2172         0x42 >> 1, 0x40 >> 1,   /* SAA7114, SAA7115 and SAA7118 */
2173         I2C_CLIENT_END };
2174
2175 static unsigned short tvp5150_addrs[] = {
2176         0xb8 >> 1,
2177         0xba >> 1,
2178         I2C_CLIENT_END
2179 };
2180
2181 static unsigned short msp3400_addrs[] = {
2182         0x80 >> 1,
2183         0x88 >> 1,
2184         I2C_CLIENT_END
2185 };
2186
2187 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2188 {
2189         int rc = 0;
2190         struct em28xx *dev = ptr;
2191
2192         if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2193                 return 0;
2194
2195         if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2196                 return 0;
2197
2198         rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2199
2200         return rc;
2201 }
2202 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2203
2204 static inline void em28xx_set_model(struct em28xx *dev)
2205 {
2206         memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
2207
2208         /* Those are the default values for the majority of boards
2209            Use those values if not specified otherwise at boards entry
2210          */
2211         if (!dev->board.xclk)
2212                 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
2213                                   EM28XX_XCLK_FREQUENCY_12MHZ;
2214
2215         if (!dev->board.i2c_speed)
2216                 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2217                                        EM28XX_I2C_FREQ_100_KHZ;
2218 }
2219
2220
2221 /* FIXME: Should be replaced by a proper mt9m111 driver */
2222 static int em28xx_initialize_mt9m111(struct em28xx *dev)
2223 {
2224         int i;
2225         unsigned char regs[][3] = {
2226                 { 0x0d, 0x00, 0x01, },  /* reset and use defaults */
2227                 { 0x0d, 0x00, 0x00, },
2228                 { 0x0a, 0x00, 0x21, },
2229                 { 0x21, 0x04, 0x00, },  /* full readout speed, no row/col skipping */
2230         };
2231
2232         for (i = 0; i < ARRAY_SIZE(regs); i++)
2233                 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2234
2235         return 0;
2236 }
2237
2238
2239 /* FIXME: Should be replaced by a proper mt9m001 driver */
2240 static int em28xx_initialize_mt9m001(struct em28xx *dev)
2241 {
2242         int i;
2243         unsigned char regs[][3] = {
2244                 { 0x0d, 0x00, 0x01, },
2245                 { 0x0d, 0x00, 0x00, },
2246                 { 0x04, 0x05, 0x00, },  /* hres = 1280 */
2247                 { 0x03, 0x04, 0x00, },  /* vres = 1024 */
2248                 { 0x20, 0x11, 0x00, },
2249                 { 0x06, 0x00, 0x10, },
2250                 { 0x2b, 0x00, 0x24, },
2251                 { 0x2e, 0x00, 0x24, },
2252                 { 0x35, 0x00, 0x24, },
2253                 { 0x2d, 0x00, 0x20, },
2254                 { 0x2c, 0x00, 0x20, },
2255                 { 0x09, 0x0a, 0xd4, },
2256                 { 0x35, 0x00, 0x57, },
2257         };
2258
2259         for (i = 0; i < ARRAY_SIZE(regs); i++)
2260                 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2261
2262         return 0;
2263 }
2264
2265 /* HINT method: webcam I2C chips
2266  *
2267  * This method works for webcams with Micron sensors
2268  */
2269 static int em28xx_hint_sensor(struct em28xx *dev)
2270 {
2271         int rc;
2272         char *sensor_name;
2273         unsigned char cmd;
2274         __be16 version_be;
2275         u16 version;
2276
2277         /* Micron sensor detection */
2278         dev->i2c_client.addr = 0xba >> 1;
2279         cmd = 0;
2280         i2c_master_send(&dev->i2c_client, &cmd, 1);
2281         rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
2282         if (rc != 2)
2283                 return -EINVAL;
2284
2285         version = be16_to_cpu(version_be);
2286         switch (version) {
2287         case 0x8232:            /* mt9v011 640x480 1.3 Mpix sensor */
2288         case 0x8243:            /* mt9v011 rev B 640x480 1.3 Mpix sensor */
2289                 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2290                 em28xx_set_model(dev);
2291
2292                 sensor_name = "mt9v011";
2293                 dev->em28xx_sensor = EM28XX_MT9V011;
2294                 dev->sensor_xres = 640;
2295                 dev->sensor_yres = 480;
2296                 /*
2297                  * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
2298                  * the Silvercrest cam I have here for testing - for higher
2299                  * resolutions, a high clock cause horizontal artifacts, so we
2300                  * need to use a lower xclk frequency.
2301                  * Yet, it would be possible to adjust xclk depending on the
2302                  * desired resolution, since this affects directly the
2303                  * frame rate.
2304                  */
2305                 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
2306                 dev->sensor_xtal = 4300000;
2307
2308                 /* probably means GRGB 16 bit bayer */
2309                 dev->vinmode = 0x0d;
2310                 dev->vinctl = 0x00;
2311
2312                 break;
2313
2314         case 0x143a:    /* MT9M111 as found in the ECS G200 */
2315                 dev->model = EM2750_BOARD_UNKNOWN;
2316                 em28xx_set_model(dev);
2317
2318                 sensor_name = "mt9m111";
2319                 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
2320                 dev->em28xx_sensor = EM28XX_MT9M111;
2321                 em28xx_initialize_mt9m111(dev);
2322                 dev->sensor_xres = 640;
2323                 dev->sensor_yres = 512;
2324
2325                 dev->vinmode = 0x0a;
2326                 dev->vinctl = 0x00;
2327
2328                 break;
2329
2330         case 0x8431:
2331                 dev->model = EM2750_BOARD_UNKNOWN;
2332                 em28xx_set_model(dev);
2333
2334                 sensor_name = "mt9m001";
2335                 dev->em28xx_sensor = EM28XX_MT9M001;
2336                 em28xx_initialize_mt9m001(dev);
2337                 dev->sensor_xres = 1280;
2338                 dev->sensor_yres = 1024;
2339
2340                 /* probably means BGGR 16 bit bayer */
2341                 dev->vinmode = 0x0c;
2342                 dev->vinctl = 0x00;
2343
2344                 break;
2345         default:
2346                 printk("Unknown Micron Sensor 0x%04x\n", version);
2347                 return -EINVAL;
2348         }
2349
2350         /* Setup webcam defaults */
2351         em28xx_pre_card_setup(dev);
2352
2353         em28xx_errdev("Sensor is %s, using model %s entry.\n",
2354                       sensor_name, em28xx_boards[dev->model].name);
2355
2356         return 0;
2357 }
2358
2359 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2360  * this won't work for boards with generic PCI IDs
2361  */
2362 static void em28xx_pre_card_setup(struct em28xx *dev)
2363 {
2364         /* Set the initial XCLK and I2C clock values based on the board
2365            definition */
2366         em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2367         if (!dev->board.is_em2800)
2368                 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2369         msleep(50);
2370
2371         /* request some modules */
2372         switch (dev->model) {
2373         case EM2861_BOARD_PLEXTOR_PX_TV100U:
2374                 /* Sets the msp34xx I2S speed */
2375                 dev->i2s_speed = 2048000;
2376                 break;
2377         case EM2861_BOARD_KWORLD_PVRTV_300U:
2378         case EM2880_BOARD_KWORLD_DVB_305U:
2379                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2380                 msleep(10);
2381                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2382                 msleep(10);
2383                 break;
2384         case EM2870_BOARD_COMPRO_VIDEOMATE:
2385                 /* TODO: someone can do some cleanup here...
2386                          not everything's needed */
2387                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2388                 msleep(10);
2389                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2390                 msleep(10);
2391                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2392                 mdelay(70);
2393                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2394                 mdelay(70);
2395                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2396                 mdelay(70);
2397                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2398                 mdelay(70);
2399                 break;
2400         case EM2870_BOARD_TERRATEC_XS_MT2060:
2401                 /* this device needs some gpio writes to get the DVB-T
2402                    demod work */
2403                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2404                 mdelay(70);
2405                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2406                 mdelay(70);
2407                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2408                 mdelay(70);
2409                 break;
2410         case EM2870_BOARD_PINNACLE_PCTV_DVB:
2411                 /* this device needs some gpio writes to get the
2412                    DVB-T demod work */
2413                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2414                 mdelay(70);
2415                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2416                 mdelay(70);
2417                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2418                 mdelay(70);
2419                 break;
2420         case EM2820_BOARD_GADMEI_UTV310:
2421         case EM2820_BOARD_MSI_VOX_USB_2:
2422                 /* enables audio for that devices */
2423                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2424                 break;
2425
2426         case EM2882_BOARD_KWORLD_ATSC_315U:
2427                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2428                 msleep(10);
2429                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2430                 msleep(10);
2431                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2432                 msleep(10);
2433                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2434                 msleep(10);
2435                 break;
2436
2437         case EM2860_BOARD_KAIOMY_TVNPC_U2:
2438                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2439                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2440                 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2441                 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2442                 msleep(10);
2443                 em28xx_write_regs(dev, 0x08, "\xff", 1);
2444                 msleep(10);
2445                 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2446                 msleep(10);
2447                 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2448
2449                 break;
2450         case EM2860_BOARD_EASYCAP:
2451                 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2452                 break;
2453
2454         case EM2820_BOARD_IODATA_GVMVP_SZ:
2455                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2456                 msleep(70);
2457                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2458                 msleep(10);
2459                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2460                 msleep(70);
2461                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2462                 msleep(70);
2463                 break;
2464         }
2465
2466         em28xx_gpio_set(dev, dev->board.tuner_gpio);
2467         em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2468
2469         /* Unlock device */
2470         em28xx_set_mode(dev, EM28XX_SUSPEND);
2471 }
2472
2473 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2474 {
2475         memset(ctl, 0, sizeof(*ctl));
2476
2477         ctl->fname   = XC2028_DEFAULT_FIRMWARE;
2478         ctl->max_len = 64;
2479         ctl->mts = em28xx_boards[dev->model].mts_firmware;
2480
2481         switch (dev->model) {
2482         case EM2880_BOARD_EMPIRE_DUAL_TV:
2483         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2484         case EM2882_BOARD_TERRATEC_HYBRID_XS:
2485                 ctl->demod = XC3028_FE_ZARLINK456;
2486                 break;
2487         case EM2880_BOARD_TERRATEC_HYBRID_XS:
2488         case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2489         case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2490                 ctl->demod = XC3028_FE_ZARLINK456;
2491                 break;
2492         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2493         case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
2494                 ctl->demod = XC3028_FE_DEFAULT;
2495                 break;
2496         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2497                 ctl->demod = XC3028_FE_DEFAULT;
2498                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2499                 break;
2500         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2501         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2502         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2503                 /* FIXME: Better to specify the needed IF */
2504                 ctl->demod = XC3028_FE_DEFAULT;
2505                 break;
2506         case EM2883_BOARD_KWORLD_HYBRID_330U:
2507         case EM2882_BOARD_DIKOM_DK300:
2508         case EM2882_BOARD_KWORLD_VS_DVBT:
2509                 ctl->demod = XC3028_FE_CHINA;
2510                 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2511                 break;
2512         case EM2882_BOARD_EVGA_INDTUBE:
2513                 ctl->demod = XC3028_FE_CHINA;
2514                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2515                 break;
2516         default:
2517                 ctl->demod = XC3028_FE_OREN538;
2518         }
2519 }
2520
2521 static void em28xx_tuner_setup(struct em28xx *dev)
2522 {
2523         struct tuner_setup           tun_setup;
2524         struct v4l2_frequency        f;
2525
2526         if (dev->tuner_type == TUNER_ABSENT)
2527                 return;
2528
2529         memset(&tun_setup, 0, sizeof(tun_setup));
2530
2531         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2532         tun_setup.tuner_callback = em28xx_tuner_callback;
2533
2534         if (dev->board.radio.type) {
2535                 tun_setup.type = dev->board.radio.type;
2536                 tun_setup.addr = dev->board.radio_addr;
2537
2538                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2539         }
2540
2541         if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2542                 tun_setup.type   = dev->tuner_type;
2543                 tun_setup.addr   = dev->tuner_addr;
2544
2545                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2546         }
2547
2548         if (dev->tda9887_conf) {
2549                 struct v4l2_priv_tun_config tda9887_cfg;
2550
2551                 tda9887_cfg.tuner = TUNER_TDA9887;
2552                 tda9887_cfg.priv = &dev->tda9887_conf;
2553
2554                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2555         }
2556
2557         if (dev->tuner_type == TUNER_XC2028) {
2558                 struct v4l2_priv_tun_config  xc2028_cfg;
2559                 struct xc2028_ctrl           ctl;
2560
2561                 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2562                 memset(&ctl, 0, sizeof(ctl));
2563
2564                 em28xx_setup_xc3028(dev, &ctl);
2565
2566                 xc2028_cfg.tuner = TUNER_XC2028;
2567                 xc2028_cfg.priv  = &ctl;
2568
2569                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2570         }
2571
2572         /* configure tuner */
2573         f.tuner = 0;
2574         f.type = V4L2_TUNER_ANALOG_TV;
2575         f.frequency = 9076;     /* just a magic number */
2576         dev->ctl_freq = f.frequency;
2577         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2578 }
2579
2580 static int em28xx_hint_board(struct em28xx *dev)
2581 {
2582         int i;
2583
2584         /* HINT method: EEPROM
2585          *
2586          * This method works only for boards with eeprom.
2587          * Uses a hash of all eeprom bytes. The hash should be
2588          * unique for a vendor/tuner pair.
2589          * There are a high chance that tuners for different
2590          * video standards produce different hashes.
2591          */
2592         for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2593                 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2594                         dev->model = em28xx_eeprom_hash[i].model;
2595                         dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2596
2597                         em28xx_errdev("Your board has no unique USB ID.\n");
2598                         em28xx_errdev("A hint were successfully done, "
2599                                       "based on eeprom hash.\n");
2600                         em28xx_errdev("This method is not 100%% failproof.\n");
2601                         em28xx_errdev("If the board were missdetected, "
2602                                       "please email this log to:\n");
2603                         em28xx_errdev("\tV4L Mailing List "
2604                                       " <linux-media@vger.kernel.org>\n");
2605                         em28xx_errdev("Board detected as %s\n",
2606                                       em28xx_boards[dev->model].name);
2607
2608                         return 0;
2609                 }
2610         }
2611
2612         /* HINT method: I2C attached devices
2613          *
2614          * This method works for all boards.
2615          * Uses a hash of i2c scanned devices.
2616          * Devices with the same i2c attached chips will
2617          * be considered equal.
2618          * This method is less precise than the eeprom one.
2619          */
2620
2621         /* user did not request i2c scanning => do it now */
2622         if (!dev->i2c_hash)
2623                 em28xx_do_i2c_scan(dev);
2624
2625         for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2626                 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2627                         dev->model = em28xx_i2c_hash[i].model;
2628                         dev->tuner_type = em28xx_i2c_hash[i].tuner;
2629                         em28xx_errdev("Your board has no unique USB ID.\n");
2630                         em28xx_errdev("A hint were successfully done, "
2631                                       "based on i2c devicelist hash.\n");
2632                         em28xx_errdev("This method is not 100%% failproof.\n");
2633                         em28xx_errdev("If the board were missdetected, "
2634                                       "please email this log to:\n");
2635                         em28xx_errdev("\tV4L Mailing List "
2636                                       " <linux-media@vger.kernel.org>\n");
2637                         em28xx_errdev("Board detected as %s\n",
2638                                       em28xx_boards[dev->model].name);
2639
2640                         return 0;
2641                 }
2642         }
2643
2644         em28xx_errdev("Your board has no unique USB ID and thus need a "
2645                       "hint to be detected.\n");
2646         em28xx_errdev("You may try to use card=<n> insmod option to "
2647                       "workaround that.\n");
2648         em28xx_errdev("Please send an email with this log to:\n");
2649         em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2650         em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2651         em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2652
2653         em28xx_errdev("Here is a list of valid choices for the card=<n>"
2654                       " insmod option:\n");
2655         for (i = 0; i < em28xx_bcount; i++) {
2656                 em28xx_errdev("    card=%d -> %s\n",
2657                                 i, em28xx_boards[i].name);
2658         }
2659         return -1;
2660 }
2661
2662 static void em28xx_card_setup(struct em28xx *dev)
2663 {
2664         /*
2665          * If the device can be a webcam, seek for a sensor.
2666          * If sensor is not found, then it isn't a webcam.
2667          */
2668         if (dev->board.is_webcam) {
2669                 if (em28xx_hint_sensor(dev) < 0)
2670                         dev->board.is_webcam = 0;
2671                 else
2672                         dev->progressive = 1;
2673         }
2674
2675         if (!dev->board.is_webcam) {
2676                 switch (dev->model) {
2677                 case EM2820_BOARD_UNKNOWN:
2678                 case EM2800_BOARD_UNKNOWN:
2679                 /*
2680                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2681                  *
2682                  * This occurs because they share identical USB vendor and
2683                  * product IDs.
2684                  *
2685                  * What we do here is look up the EEPROM hash of the K-WORLD
2686                  * and if it is found then we decide that we do not have
2687                  * a DIGIVOX and reset the device to the K-WORLD instead.
2688                  *
2689                  * This solution is only valid if they do not share eeprom
2690                  * hash identities which has not been determined as yet.
2691                  */
2692                 if (em28xx_hint_board(dev) < 0)
2693                         em28xx_errdev("Board not discovered\n");
2694                 else {
2695                         em28xx_set_model(dev);
2696                         em28xx_pre_card_setup(dev);
2697                 }
2698                 break;
2699                 default:
2700                         em28xx_set_model(dev);
2701                 }
2702         }
2703
2704         em28xx_info("Identified as %s (card=%d)\n",
2705                     dev->board.name, dev->model);
2706
2707         dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2708         if (em28xx_boards[dev->model].tuner_addr)
2709                 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2710
2711         if (em28xx_boards[dev->model].tda9887_conf)
2712                 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2713
2714         /* request some modules */
2715         switch (dev->model) {
2716         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2717         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2718         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2719         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2720         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2721         {
2722                 struct tveeprom tv;
2723 #if defined(CONFIG_MODULES) && defined(MODULE)
2724                 request_module("tveeprom");
2725 #endif
2726                 /* Call first TVeeprom */
2727
2728                 dev->i2c_client.addr = 0xa0 >> 1;
2729                 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2730
2731                 dev->tuner_type = tv.tuner_type;
2732
2733                 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2734                         dev->i2s_speed = 2048000;
2735                         dev->board.has_msp34xx = 1;
2736                 }
2737                 break;
2738         }
2739         case EM2882_BOARD_KWORLD_ATSC_315U:
2740                 em28xx_write_reg(dev, 0x0d, 0x42);
2741                 msleep(10);
2742                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2743                 msleep(10);
2744                 break;
2745         case EM2820_BOARD_KWORLD_PVRTV2800RF:
2746                 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2747                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2748                 break;
2749         case EM2820_BOARD_UNKNOWN:
2750         case EM2800_BOARD_UNKNOWN:
2751                 /*
2752                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2753                  *
2754                  * This occurs because they share identical USB vendor and
2755                  * product IDs.
2756                  *
2757                  * What we do here is look up the EEPROM hash of the K-WORLD
2758                  * and if it is found then we decide that we do not have
2759                  * a DIGIVOX and reset the device to the K-WORLD instead.
2760                  *
2761                  * This solution is only valid if they do not share eeprom
2762                  * hash identities which has not been determined as yet.
2763                  */
2764         case EM2880_BOARD_MSI_DIGIVOX_AD:
2765                 if (!em28xx_hint_board(dev))
2766                         em28xx_set_model(dev);
2767
2768                 /* In cases where we had to use a board hint, the call to
2769                    em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2770                    so make the call now so the analog GPIOs are set properly
2771                    before probing the i2c bus. */
2772                 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2773                 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2774                 break;
2775
2776 /*
2777                  * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2778                  *
2779                  * This occurs because they share identical USB vendor and
2780                  * product IDs.
2781                  *
2782                  * What we do here is look up the EEPROM hash of the Dikom
2783                  * and if it is found then we decide that we do not have
2784                  * a Kworld and reset the device to the Dikom instead.
2785                  *
2786                  * This solution is only valid if they do not share eeprom
2787                  * hash identities which has not been determined as yet.
2788                  */
2789         case EM2882_BOARD_KWORLD_VS_DVBT:
2790                 if (!em28xx_hint_board(dev))
2791                         em28xx_set_model(dev);
2792
2793                 /* In cases where we had to use a board hint, the call to
2794                    em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2795                    so make the call now so the analog GPIOs are set properly
2796                    before probing the i2c bus. */
2797                 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2798                 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2799                 break;
2800         }
2801
2802         if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2803                 em28xx_errdev("\n\n");
2804                 em28xx_errdev("The support for this board weren't "
2805                               "valid yet.\n");
2806                 em28xx_errdev("Please send a report of having this working\n");
2807                 em28xx_errdev("not to V4L mailing list (and/or to other "
2808                                 "addresses)\n\n");
2809         }
2810
2811         /* Allow override tuner type by a module parameter */
2812         if (tuner >= 0)
2813                 dev->tuner_type = tuner;
2814
2815         /* request some modules */
2816         if (dev->board.has_msp34xx)
2817                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2818                         "msp3400", 0, msp3400_addrs);
2819
2820         if (dev->board.decoder == EM28XX_SAA711X)
2821                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2822                         "saa7115_auto", 0, saa711x_addrs);
2823
2824         if (dev->board.decoder == EM28XX_TVP5150)
2825                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2826                         "tvp5150", 0, tvp5150_addrs);
2827
2828         if (dev->em28xx_sensor == EM28XX_MT9V011) {
2829                 struct mt9v011_platform_data pdata;
2830                 struct i2c_board_info mt9v011_info = {
2831                         .type = "mt9v011",
2832                         .addr = 0xba >> 1,
2833                         .platform_data = &pdata,
2834                 };
2835
2836                 pdata.xtal = dev->sensor_xtal;
2837                 v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
2838                                 &mt9v011_info, NULL);
2839         }
2840
2841
2842         if (dev->board.adecoder == EM28XX_TVAUDIO)
2843                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2844                         "tvaudio", dev->board.tvaudio_addr, NULL);
2845
2846         if (dev->board.tuner_type != TUNER_ABSENT) {
2847                 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2848
2849                 if (dev->board.radio.type)
2850                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2851                                 "tuner", dev->board.radio_addr, NULL);
2852
2853                 if (has_demod)
2854                         v4l2_i2c_new_subdev(&dev->v4l2_dev,
2855                                 &dev->i2c_adap, "tuner",
2856                                 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2857                 if (dev->tuner_addr == 0) {
2858                         enum v4l2_i2c_tuner_type type =
2859                                 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2860                         struct v4l2_subdev *sd;
2861
2862                         sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2863                                 &dev->i2c_adap, "tuner",
2864                                 0, v4l2_i2c_tuner_addrs(type));
2865
2866                         if (sd)
2867                                 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2868                 } else {
2869                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2870                                 "tuner", dev->tuner_addr, NULL);
2871                 }
2872         }
2873
2874         em28xx_tuner_setup(dev);
2875 }
2876
2877
2878 #if defined(CONFIG_MODULES) && defined(MODULE)
2879 static void request_module_async(struct work_struct *work)
2880 {
2881         struct em28xx *dev = container_of(work,
2882                              struct em28xx, request_module_wk);
2883
2884         if (dev->has_audio_class)
2885                 request_module("snd-usb-audio");
2886         else if (dev->has_alsa_audio)
2887                 request_module("em28xx-alsa");
2888
2889         if (dev->board.has_dvb)
2890                 request_module("em28xx-dvb");
2891         if (dev->board.ir_codes && !disable_ir)
2892                 request_module("em28xx-rc");
2893 }
2894
2895 static void request_modules(struct em28xx *dev)
2896 {
2897         INIT_WORK(&dev->request_module_wk, request_module_async);
2898         schedule_work(&dev->request_module_wk);
2899 }
2900
2901 static void flush_request_modules(struct em28xx *dev)
2902 {
2903         flush_work(&dev->request_module_wk);
2904 }
2905 #else
2906 #define request_modules(dev)
2907 #define flush_request_modules(dev)
2908 #endif /* CONFIG_MODULES */
2909
2910 /*
2911  * em28xx_release_resources()
2912  * unregisters the v4l2,i2c and usb devices
2913  * called when the device gets disconnected or at module unload
2914 */
2915 void em28xx_release_resources(struct em28xx *dev)
2916 {
2917         /*FIXME: I2C IR should be disconnected */
2918
2919         em28xx_release_analog_resources(dev);
2920
2921         em28xx_i2c_unregister(dev);
2922
2923         v4l2_device_unregister(&dev->v4l2_dev);
2924
2925         usb_put_dev(dev->udev);
2926
2927         /* Mark device as unused */
2928         clear_bit(dev->devno, &em28xx_devused);
2929 };
2930
2931 /*
2932  * em28xx_init_dev()
2933  * allocates and inits the device structs, registers i2c bus and v4l device
2934  */
2935 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
2936                            struct usb_interface *interface,
2937                            int minor)
2938 {
2939         int retval;
2940
2941         dev->udev = udev;
2942         mutex_init(&dev->ctrl_urb_lock);
2943         spin_lock_init(&dev->slock);
2944
2945         dev->em28xx_write_regs = em28xx_write_regs;
2946         dev->em28xx_read_reg = em28xx_read_reg;
2947         dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2948         dev->em28xx_write_regs_req = em28xx_write_regs_req;
2949         dev->em28xx_read_reg_req = em28xx_read_reg_req;
2950         dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2951
2952         em28xx_set_model(dev);
2953
2954         /* Set the default GPO/GPIO for legacy devices */
2955         dev->reg_gpo_num = EM2880_R04_GPO;
2956         dev->reg_gpio_num = EM28XX_R08_GPIO;
2957
2958         dev->wait_after_write = 5;
2959
2960         /* Based on the Chip ID, set the device configuration */
2961         retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2962         if (retval > 0) {
2963                 dev->chip_id = retval;
2964
2965                 switch (dev->chip_id) {
2966                 case CHIP_ID_EM2800:
2967                         em28xx_info("chip ID is em2800\n");
2968                         break;
2969                 case CHIP_ID_EM2710:
2970                         em28xx_info("chip ID is em2710\n");
2971                         break;
2972                 case CHIP_ID_EM2750:
2973                         em28xx_info("chip ID is em2750\n");
2974                         break;
2975                 case CHIP_ID_EM2820:
2976                         em28xx_info("chip ID is em2820 (or em2710)\n");
2977                         break;
2978                 case CHIP_ID_EM2840:
2979                         em28xx_info("chip ID is em2840\n");
2980                         break;
2981                 case CHIP_ID_EM2860:
2982                         em28xx_info("chip ID is em2860\n");
2983                         break;
2984                 case CHIP_ID_EM2870:
2985                         em28xx_info("chip ID is em2870\n");
2986                         dev->wait_after_write = 0;
2987                         break;
2988                 case CHIP_ID_EM2874:
2989                         em28xx_info("chip ID is em2874\n");
2990                         dev->reg_gpio_num = EM2874_R80_GPIO;
2991                         dev->wait_after_write = 0;
2992                         break;
2993                 case CHIP_ID_EM28174:
2994                         em28xx_info("chip ID is em28174\n");
2995                         dev->reg_gpio_num = EM2874_R80_GPIO;
2996                         dev->wait_after_write = 0;
2997                         break;
2998                 case CHIP_ID_EM2883:
2999                         em28xx_info("chip ID is em2882/em2883\n");
3000                         dev->wait_after_write = 0;
3001                         break;
3002                 case CHIP_ID_EM2884:
3003                         em28xx_info("chip ID is em2884\n");
3004                         dev->reg_gpio_num = EM2874_R80_GPIO;
3005                         dev->wait_after_write = 0;
3006                         break;
3007                 default:
3008                         em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
3009                 }
3010         }
3011
3012         if (dev->is_audio_only) {
3013                 retval = em28xx_audio_setup(dev);
3014                 if (retval)
3015                         return -ENODEV;
3016                 em28xx_init_extension(dev);
3017
3018                 return 0;
3019         }
3020
3021         /* Prepopulate cached GPO register content */
3022         retval = em28xx_read_reg(dev, dev->reg_gpo_num);
3023         if (retval >= 0)
3024                 dev->reg_gpo = retval;
3025
3026         em28xx_pre_card_setup(dev);
3027
3028         if (!dev->board.is_em2800) {
3029                 /* Resets I2C speed */
3030                 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
3031                 if (retval < 0) {
3032                         em28xx_errdev("%s: em28xx_write_reg failed!"
3033                                       " retval [%d]\n",
3034                                       __func__, retval);
3035                         return retval;
3036                 }
3037         }
3038
3039         retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
3040         if (retval < 0) {
3041                 em28xx_errdev("Call to v4l2_device_register() failed!\n");
3042                 return retval;
3043         }
3044
3045         /* register i2c bus */
3046         retval = em28xx_i2c_register(dev);
3047         if (retval < 0) {
3048                 em28xx_errdev("%s: em28xx_i2c_register - error [%d]!\n",
3049                         __func__, retval);
3050                 goto unregister_dev;
3051         }
3052
3053         /*
3054          * Default format, used for tvp5150 or saa711x output formats
3055          */
3056         dev->vinmode = 0x10;
3057         dev->vinctl  = EM28XX_VINCTRL_INTERLACED |
3058                        EM28XX_VINCTRL_CCIR656_ENABLE;
3059
3060         /* Do board specific init and eeprom reading */
3061         em28xx_card_setup(dev);
3062
3063         /* Configure audio */
3064         retval = em28xx_audio_setup(dev);
3065         if (retval < 0) {
3066                 em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
3067                         __func__, retval);
3068                 goto fail;
3069         }
3070
3071         /* wake i2c devices */
3072         em28xx_wake_i2c(dev);
3073
3074         /* init video dma queues */
3075         INIT_LIST_HEAD(&dev->vidq.active);
3076         INIT_LIST_HEAD(&dev->vbiq.active);
3077
3078         if (dev->board.has_msp34xx) {
3079                 /* Send a reset to other chips via gpio */
3080                 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
3081                 if (retval < 0) {
3082                         em28xx_errdev("%s: em28xx_write_reg - "
3083                                       "msp34xx(1) failed! error [%d]\n",
3084                                       __func__, retval);
3085                         goto fail;
3086                 }
3087                 msleep(3);
3088
3089                 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
3090                 if (retval < 0) {
3091                         em28xx_errdev("%s: em28xx_write_reg - "
3092                                       "msp34xx(2) failed! error [%d]\n",
3093                                       __func__, retval);
3094                         goto fail;
3095                 }
3096                 msleep(3);
3097         }
3098
3099         retval = em28xx_register_analog_devices(dev);
3100         if (retval < 0) {
3101                 goto fail;
3102         }
3103
3104         /* Save some power by putting tuner to sleep */
3105         v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
3106
3107         return 0;
3108
3109 fail:
3110         em28xx_i2c_unregister(dev);
3111
3112 unregister_dev:
3113         v4l2_device_unregister(&dev->v4l2_dev);
3114
3115         return retval;
3116 }
3117
3118 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3119 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3120
3121 /*
3122  * em28xx_usb_probe()
3123  * checks for supported devices
3124  */
3125 static int em28xx_usb_probe(struct usb_interface *interface,
3126                             const struct usb_device_id *id)
3127 {
3128         struct usb_device *udev;
3129         struct em28xx *dev = NULL;
3130         int retval;
3131         bool has_audio = false, has_video = false, has_dvb = false;
3132         int i, nr;
3133         const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
3134         char *speed;
3135
3136         udev = usb_get_dev(interface_to_usbdev(interface));
3137
3138         /* Check to see next free device and mark as used */
3139         do {
3140                 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
3141                 if (nr >= EM28XX_MAXBOARDS) {
3142                         /* No free device slots */
3143                         printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3144                                         EM28XX_MAXBOARDS);
3145                         retval = -ENOMEM;
3146                         goto err_no_slot;
3147                 }
3148         } while (test_and_set_bit(nr, &em28xx_devused));
3149
3150         /* Don't register audio interfaces */
3151         if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3152                 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
3153                         "interface %i, class %i\n",
3154                         le16_to_cpu(udev->descriptor.idVendor),
3155                         le16_to_cpu(udev->descriptor.idProduct),
3156                         ifnum,
3157                         interface->altsetting[0].desc.bInterfaceClass);
3158
3159                 retval = -ENODEV;
3160                 goto err;
3161         }
3162
3163         /* allocate memory for our device state and initialize it */
3164         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3165         if (dev == NULL) {
3166                 em28xx_err(DRIVER_NAME ": out of memory!\n");
3167                 retval = -ENOMEM;
3168                 goto err;
3169         }
3170
3171         /* compute alternate max packet sizes */
3172         dev->alt_max_pkt_size = kmalloc(sizeof(dev->alt_max_pkt_size[0]) *
3173                                         interface->num_altsetting, GFP_KERNEL);
3174         if (dev->alt_max_pkt_size == NULL) {
3175                 em28xx_errdev("out of memory!\n");
3176                 kfree(dev);
3177                 retval = -ENOMEM;
3178                 goto err;
3179         }
3180
3181         /* Get endpoints */
3182         for (i = 0; i < interface->num_altsetting; i++) {
3183                 int ep;
3184
3185                 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
3186                         const struct usb_endpoint_descriptor *e;
3187                         int sizedescr, size;
3188
3189                         e = &interface->altsetting[i].endpoint[ep].desc;
3190
3191                         sizedescr = le16_to_cpu(e->wMaxPacketSize);
3192                         size = sizedescr & 0x7ff;
3193
3194                         if (udev->speed == USB_SPEED_HIGH)
3195                                 size = size * hb_mult(sizedescr);
3196
3197                         if (usb_endpoint_xfer_isoc(e) &&
3198                             usb_endpoint_dir_in(e)) {
3199                                 switch (e->bEndpointAddress) {
3200                                 case EM28XX_EP_AUDIO:
3201                                         has_audio = true;
3202                                         break;
3203                                 case EM28XX_EP_ANALOG:
3204                                         has_video = true;
3205                                         dev->alt_max_pkt_size[i] = size;
3206                                         break;
3207                                 case EM28XX_EP_DIGITAL:
3208                                         has_dvb = true;
3209                                         if (size > dev->dvb_max_pkt_size) {
3210                                                 dev->dvb_max_pkt_size = size;
3211                                                 dev->dvb_alt = i;
3212                                         }
3213                                         break;
3214                                 }
3215                         }
3216                 }
3217         }
3218
3219         if (!(has_audio || has_video || has_dvb)) {
3220                 retval = -ENODEV;
3221                 goto err_free;
3222         }
3223
3224         switch (udev->speed) {
3225         case USB_SPEED_LOW:
3226                 speed = "1.5";
3227                 break;
3228         case USB_SPEED_UNKNOWN:
3229         case USB_SPEED_FULL:
3230                 speed = "12";
3231                 break;
3232         case USB_SPEED_HIGH:
3233                 speed = "480";
3234                 break;
3235         default:
3236                 speed = "unknown";
3237         }
3238
3239         printk(KERN_INFO DRIVER_NAME
3240                 ": New device %s %s @ %s Mbps "
3241                 "(%04x:%04x, interface %d, class %d)\n",
3242                 udev->manufacturer ? udev->manufacturer : "",
3243                 udev->product ? udev->product : "",
3244                 speed,
3245                 le16_to_cpu(udev->descriptor.idVendor),
3246                 le16_to_cpu(udev->descriptor.idProduct),
3247                 ifnum,
3248                 interface->altsetting->desc.bInterfaceNumber);
3249
3250         if (has_audio)
3251                 printk(KERN_INFO DRIVER_NAME
3252                        ": Audio Vendor Class interface %i found\n",
3253                        ifnum);
3254         if (has_video)
3255                 printk(KERN_INFO DRIVER_NAME
3256                        ": Video interface %i found\n",
3257                        ifnum);
3258         if (has_dvb)
3259                 printk(KERN_INFO DRIVER_NAME
3260                        ": DVB interface %i found\n",
3261                        ifnum);
3262
3263         /*
3264          * Make sure we have 480 Mbps of bandwidth, otherwise things like
3265          * video stream wouldn't likely work, since 12 Mbps is generally
3266          * not enough even for most Digital TV streams.
3267          */
3268         if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3269                 printk(DRIVER_NAME ": Device initialization failed.\n");
3270                 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3271                        " USB 2.0 port.\n");
3272                 retval = -ENODEV;
3273                 goto err_free;
3274         }
3275
3276         snprintf(dev->name, sizeof(dev->name), "em28xx #%d", nr);
3277         dev->devno = nr;
3278         dev->model = id->driver_info;
3279         dev->alt   = -1;
3280         dev->is_audio_only = has_audio && !(has_video || has_dvb);
3281         dev->has_alsa_audio = has_audio;
3282         dev->audio_ifnum = ifnum;
3283
3284         /* Checks if audio is provided by some interface */
3285         for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3286                 struct usb_interface *uif = udev->config->interface[i];
3287                 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3288                         dev->has_audio_class = 1;
3289                         break;
3290                 }
3291         }
3292
3293         dev->num_alt = interface->num_altsetting;
3294
3295         if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
3296                 dev->model = card[nr];
3297
3298         /* save our data pointer in this interface device */
3299         usb_set_intfdata(interface, dev);
3300
3301         /* allocate device struct */
3302         mutex_init(&dev->lock);
3303         mutex_lock(&dev->lock);
3304         retval = em28xx_init_dev(dev, udev, interface, nr);
3305         if (retval) {
3306                 goto unlock_and_free;
3307         }
3308
3309         if (has_dvb) {
3310                 /* pre-allocate DVB isoc transfer buffers */
3311                 retval = em28xx_alloc_isoc(dev, EM28XX_DIGITAL_MODE,
3312                                            EM28XX_DVB_MAX_PACKETS,
3313                                            EM28XX_DVB_NUM_BUFS,
3314                                            dev->dvb_max_pkt_size);
3315                 if (retval) {
3316                         goto unlock_and_free;
3317                 }
3318         }
3319
3320         request_modules(dev);
3321
3322         /* Should be the last thing to do, to avoid newer udev's to
3323            open the device before fully initializing it
3324          */
3325         mutex_unlock(&dev->lock);
3326
3327         /*
3328          * These extensions can be modules. If the modules are already
3329          * loaded then we can initialise the device now, otherwise we
3330          * will initialise it when the modules load instead.
3331          */
3332         em28xx_init_extension(dev);
3333
3334         return 0;
3335
3336 unlock_and_free:
3337         mutex_unlock(&dev->lock);
3338
3339 err_free:
3340         kfree(dev->alt_max_pkt_size);
3341         kfree(dev);
3342
3343 err:
3344         clear_bit(nr, &em28xx_devused);
3345
3346 err_no_slot:
3347         usb_put_dev(udev);
3348         return retval;
3349 }
3350
3351 /*
3352  * em28xx_usb_disconnect()
3353  * called when the device gets disconnected
3354  * video device will be unregistered on v4l2_close in case it is still open
3355  */
3356 static void em28xx_usb_disconnect(struct usb_interface *interface)
3357 {
3358         struct em28xx *dev;
3359
3360         dev = usb_get_intfdata(interface);
3361         usb_set_intfdata(interface, NULL);
3362
3363         if (!dev)
3364                 return;
3365
3366         if (dev->is_audio_only) {
3367                 mutex_lock(&dev->lock);
3368                 em28xx_close_extension(dev);
3369                 mutex_unlock(&dev->lock);
3370                 return;
3371         }
3372
3373         em28xx_info("disconnecting %s\n", dev->vdev->name);
3374
3375         flush_request_modules(dev);
3376
3377         /* wait until all current v4l2 io is finished then deallocate
3378            resources */
3379         mutex_lock(&dev->lock);
3380
3381         v4l2_device_disconnect(&dev->v4l2_dev);
3382
3383         if (dev->users) {
3384                 em28xx_warn
3385                     ("device %s is open! Deregistration and memory "
3386                      "deallocation are deferred on close.\n",
3387                      video_device_node_name(dev->vdev));
3388
3389                 dev->state |= DEV_MISCONFIGURED;
3390                 em28xx_uninit_isoc(dev, dev->mode);
3391                 dev->state |= DEV_DISCONNECTED;
3392         } else {
3393                 dev->state |= DEV_DISCONNECTED;
3394                 em28xx_release_resources(dev);
3395         }
3396
3397         /* free DVB isoc buffers */
3398         em28xx_uninit_isoc(dev, EM28XX_DIGITAL_MODE);
3399
3400         mutex_unlock(&dev->lock);
3401
3402         em28xx_close_extension(dev);
3403
3404         if (!dev->users) {
3405                 kfree(dev->alt_max_pkt_size);
3406                 kfree(dev);
3407         }
3408 }
3409
3410 static struct usb_driver em28xx_usb_driver = {
3411         .name = "em28xx",
3412         .probe = em28xx_usb_probe,
3413         .disconnect = em28xx_usb_disconnect,
3414         .id_table = em28xx_id_table,
3415 };
3416
3417 module_usb_driver(em28xx_usb_driver);