2 # Generic video config states
7 depends on VIDEO_DEV && VIDEO_V4L2_COMMON
8 default VIDEO_DEV && VIDEO_V4L2_COMMON
12 depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
13 default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
18 config VIDEOBUF_DMA_SG
23 config VIDEOBUF_VMALLOC
27 config VIDEOBUF_DMA_CONTIG
50 depends on MEDIA_TUNER
53 # Multimedia Video device configuration
56 menuconfig VIDEO_CAPTURE_DRIVERS
57 bool "Video capture adapters"
61 Say Y here to enable selecting the video adapters for
62 webcams, analog TV, and hybrid analog/digital TV.
63 Some of those devices also supports FM radio.
65 if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
67 config VIDEO_ADV_DEBUG
68 bool "Enable advanced debug functionality"
71 Say Y here to enable advanced debugging functionality on some
75 config VIDEO_FIXED_MINOR_RANGES
76 bool "Enable old-style fixed minor ranges for video devices"
79 Say Y here to enable the old-style fixed-range minor assignments.
80 Only useful if you rely on the old behavior and use mknod instead of udev.
84 config VIDEO_HELPER_CHIPS_AUTO
85 bool "Autoselect pertinent encoders/decoders and other helper chips"
88 Most video cards may require additional modules to encode or
89 decode audio/video standards. This option will autoselect
90 all pertinent modules to each selected video module.
92 Unselect this only if you know exactly what you are doing, since
93 it may break support on some boards.
98 tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
99 depends on I2C && VIDEO_IR
102 Most boards have an IR chip directly connected via GPIO. However,
103 some video boards have the IR connected via I2C bus.
105 If your board doesn't have an I2C IR chip, you may disable this
111 # Encoder / Decoder module configuration
114 menu "Encoders/decoders and other helper chips"
115 depends on !VIDEO_HELPER_CHIPS_AUTO
117 comment "Audio decoders"
120 tristate "Simple audio decoder chips"
121 depends on VIDEO_V4L2 && I2C
123 Support for several audio decoder chips found on some bt8xx boards:
124 Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
125 tea6320, tea6420, tda8425, ta8874z.
126 Microchip: pic16c54 based design on ProVideo PV951 board.
128 To compile this driver as a module, choose M here: the
129 module will be called tvaudio.
132 tristate "Philips TDA7432 audio processor"
133 depends on VIDEO_V4L2 && I2C
135 Support for tda7432 audio decoder chip found on some bt8xx boards.
137 To compile this driver as a module, choose M here: the
138 module will be called tda7432.
141 tristate "Philips TDA9840 audio processor"
144 Support for tda9840 audio decoder chip found on some Zoran boards.
146 To compile this driver as a module, choose M here: the
147 module will be called tda9840.
150 tristate "Philips TDA9875 audio processor"
151 depends on VIDEO_V4L2 && I2C
153 Support for tda9875 audio decoder chip found on some bt8xx boards.
155 To compile this driver as a module, choose M here: the
156 module will be called tda9875.
158 config VIDEO_TEA6415C
159 tristate "Philips TEA6415C audio processor"
162 Support for tea6415c audio decoder chip found on some bt8xx boards.
164 To compile this driver as a module, choose M here: the
165 module will be called tea6415c.
168 tristate "Philips TEA6420 audio processor"
171 Support for tea6420 audio decoder chip found on some bt8xx boards.
173 To compile this driver as a module, choose M here: the
174 module will be called tea6420.
177 tristate "Micronas MSP34xx audio decoders"
178 depends on VIDEO_V4L2 && I2C
180 Support for the Micronas MSP34xx series of audio decoders.
182 To compile this driver as a module, choose M here: the
183 module will be called msp3400.
186 tristate "Cirrus Logic CS5345 audio ADC"
187 depends on VIDEO_V4L2 && I2C
189 Support for the Cirrus Logic CS5345 24-bit, 192 kHz
190 stereo A/D converter.
192 To compile this driver as a module, choose M here: the
193 module will be called cs5345.
195 config VIDEO_CS53L32A
196 tristate "Cirrus Logic CS53L32A audio ADC"
197 depends on VIDEO_V4L2 && I2C
199 Support for the Cirrus Logic CS53L32A low voltage
200 stereo A/D converter.
202 To compile this driver as a module, choose M here: the
203 module will be called cs53l32a.
206 tristate "Mitsubishi M52790 A/V switch"
207 depends on VIDEO_V4L2 && I2C
209 Support for the Mitsubishi M52790 A/V switch.
211 To compile this driver as a module, choose M here: the
212 module will be called m52790.
214 config VIDEO_TLV320AIC23B
215 tristate "Texas Instruments TLV320AIC23B audio codec"
216 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
218 Support for the Texas Instruments TLV320AIC23B audio codec.
220 To compile this driver as a module, choose M here: the
221 module will be called tlv320aic23b.
224 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
225 depends on VIDEO_V4L2 && I2C
227 Support for the Wolfson Microelectronics WM8775 high
228 performance stereo A/D Converter with a 4 channel input mixer.
230 To compile this driver as a module, choose M here: the
231 module will be called wm8775.
234 tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
235 depends on VIDEO_V4L2 && I2C
237 Support for the Wolfson Microelectronics WM8739
238 stereo A/D Converter.
240 To compile this driver as a module, choose M here: the
241 module will be called wm8739.
243 config VIDEO_VP27SMPX
244 tristate "Panasonic VP27s internal MPX"
245 depends on VIDEO_V4L2 && I2C
247 Support for the internal MPX of the Panasonic VP27s tuner.
249 To compile this driver as a module, choose M here: the
250 module will be called vp27smpx.
252 comment "RDS decoders"
255 tristate "SAA6588 Radio Chip RDS decoder support"
256 depends on VIDEO_V4L2 && I2C
259 Support for this Radio Data System (RDS) decoder. This allows
260 seeing radio station identification transmitted using this
263 To compile this driver as a module, choose M here: the
264 module will be called saa6588.
266 comment "Video decoders"
269 tristate "BT819A VideoStream decoder"
270 depends on VIDEO_V4L2 && I2C
272 Support for BT819A video decoder.
274 To compile this driver as a module, choose M here: the
275 module will be called bt819.
278 tristate "BT856 VideoStream decoder"
279 depends on VIDEO_V4L2 && I2C
281 Support for BT856 video decoder.
283 To compile this driver as a module, choose M here: the
284 module will be called bt856.
287 tristate "BT866 VideoStream decoder"
288 depends on VIDEO_V4L2 && I2C
290 Support for BT866 video decoder.
292 To compile this driver as a module, choose M here: the
293 module will be called bt866.
296 tristate "KS0127 video decoder"
297 depends on VIDEO_V4L2 && I2C
299 Support for KS0127 video decoder.
301 This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
304 To compile this driver as a module, choose M here: the
305 module will be called ks0127.
308 tristate "OmniVision OV7670 sensor support"
309 depends on I2C && VIDEO_V4L2
311 This is a Video4Linux2 sensor-level driver for the OmniVision
312 OV7670 VGA camera. It currently only works with the M88ALP01
316 tristate "Micron mt9v011 sensor support"
317 depends on I2C && VIDEO_V4L2
319 This is a Video4Linux2 sensor-level driver for the Micron
320 mt0v011 1.3 Mpixel camera. It currently only works with the
324 tristate "TCM825x camera sensor support"
325 depends on I2C && VIDEO_V4L2
327 This is a driver for the Toshiba TCM825x VGA camera sensor.
328 It is used for example in Nokia N800.
331 tristate "Philips SAA7110 video decoder"
332 depends on VIDEO_V4L2 && I2C
334 Support for the Philips SAA7110 video decoders.
336 To compile this driver as a module, choose M here: the
337 module will be called saa7110.
340 tristate "Philips SAA7111/3/4/5 video decoders"
341 depends on VIDEO_V4L2 && I2C
343 Support for the Philips SAA7111/3/4/5 video decoders.
345 To compile this driver as a module, choose M here: the
346 module will be called saa7115.
349 tristate "Philips SAA7171/3/4 audio/video decoders"
350 depends on VIDEO_V4L2 && I2C
352 Support for the Philips SAA7171/3/4 audio/video decoders.
354 To compile this driver as a module, choose M here: the
355 module will be called saa717x.
358 tristate "Philips SAA7191 video decoder"
359 depends on VIDEO_V4L1 && I2C
361 Support for the Philips SAA7191 video decoder.
363 To compile this driver as a module, choose M here: the
364 module will be called saa7191.
367 tristate "Texas Instruments TVP514x video decoder"
368 depends on VIDEO_V4L2 && I2C
370 This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
371 decoder. It is currently working with the TI OMAP3 camera
374 To compile this driver as a module, choose M here: the
375 module will be called tvp514x.
378 tristate "Texas Instruments TVP5150 video decoder"
379 depends on VIDEO_V4L2 && I2C
381 Support for the Texas Instruments TVP5150 video decoder.
383 To compile this driver as a module, choose M here: the
384 module will be called tvp5150.
387 tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
388 depends on VIDEO_V4L2 && I2C
390 Support for VPX322x video decoders.
392 To compile this driver as a module, choose M here: the
393 module will be called vpx3220.
395 comment "Video and audio decoders"
397 source "drivers/media/video/cx25840/Kconfig"
399 comment "MPEG video encoders"
402 tristate "Conexant CX2341x MPEG encoders"
403 depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
405 Support for the Conexant CX23416 MPEG encoders
406 and CX23415 MPEG encoder/decoders.
408 This module currently supports the encoding functions only.
410 To compile this driver as a module, choose M here: the
411 module will be called cx2341x.
413 comment "Video encoders"
416 tristate "Philips SAA7127/9 digital video encoders"
417 depends on VIDEO_V4L2 && I2C
419 Support for the Philips SAA7127/9 digital video encoders.
421 To compile this driver as a module, choose M here: the
422 module will be called saa7127.
425 tristate "Philips SAA7185 video encoder"
426 depends on VIDEO_V4L2 && I2C
428 Support for the Philips SAA7185 video encoder.
430 To compile this driver as a module, choose M here: the
431 module will be called saa7185.
434 tristate "Analog Devices ADV7170 video encoder"
435 depends on VIDEO_V4L2 && I2C
437 Support for the Analog Devices ADV7170 video encoder driver
439 To compile this driver as a module, choose M here: the
440 module will be called adv7170.
443 tristate "Analog Devices ADV7175 video encoder"
444 depends on VIDEO_V4L2 && I2C
446 Support for the Analog Devices ADV7175 video encoder driver
448 To compile this driver as a module, choose M here: the
449 module will be called adv7175.
452 tristate "THS7303 Video Amplifier"
455 Support for TI THS7303 video amplifier
457 To compile this driver as a module, choose M here: the
458 module will be called ths7303.
461 tristate "ADV7343 video encoder"
464 Support for Analog Devices I2C bus based ADV7343 encoder.
466 To compile this driver as a module, choose M here: the
467 module will be called adv7343.
469 comment "Video improvement chips"
471 config VIDEO_UPD64031A
472 tristate "NEC Electronics uPD64031A Ghost Reduction"
473 depends on VIDEO_V4L2 && I2C
475 Support for the NEC Electronics uPD64031A Ghost Reduction
476 video chip. It is most often found in NTSC TV cards made for
477 Japan and is used to reduce the 'ghosting' effect that can
478 be present in analog TV broadcasts.
480 To compile this driver as a module, choose M here: the
481 module will be called upd64031a.
483 config VIDEO_UPD64083
484 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
485 depends on VIDEO_V4L2 && I2C
487 Support for the NEC Electronics uPD64083 3-Dimensional Y/C
488 separation video chip. It is used to improve the quality of
489 the colors of a composite signal.
491 To compile this driver as a module, choose M here: the
492 module will be called upd64083.
494 endmenu # encoder / decoder chips
496 config DISPLAY_DAVINCI_DM646X_EVM
497 tristate "DM646x EVM Video Display"
498 depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
499 select VIDEOBUF_DMA_CONTIG
500 select VIDEO_DAVINCI_VPIF
504 Support for DM6467 based display device.
506 To compile this driver as a module, choose M here: the
507 module will be called vpif_display.
509 config CAPTURE_DAVINCI_DM646X_EVM
510 tristate "DM646x EVM Video Capture"
511 depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
512 select VIDEOBUF_DMA_CONTIG
513 select VIDEO_DAVINCI_VPIF
515 Support for DM6467 based capture device.
517 To compile this driver as a module, choose M here: the
518 module will be called vpif_capture.
520 config VIDEO_DAVINCI_VPIF
521 tristate "DaVinci VPIF Driver"
522 depends on DISPLAY_DAVINCI_DM646X_EVM
524 Support for DaVinci VPIF Driver.
526 To compile this driver as a module, choose M here: the
527 module will be called vpif.
530 tristate "Virtual Video Driver"
531 depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
532 select VIDEOBUF_VMALLOC
535 Enables a virtual video driver. This device shows a color bar
536 and a timestamp, as a real device would generate by using V4L2
538 Say Y here if you want to test video apps or debug V4L devices.
541 config VIDEO_VPSS_SYSTEM
542 tristate "VPSS System module driver"
543 depends on ARCH_DAVINCI
545 Support for vpss system module for video driver
548 config VIDEO_VPFE_CAPTURE
549 tristate "VPFE Video Capture Driver"
550 depends on VIDEO_V4L2 && ARCH_DAVINCI
551 select VIDEOBUF_DMA_CONTIG
553 Support for DMXXXX VPFE based frame grabber. This is the
554 common V4L2 module for following DMXXX SoCs from Texas
555 Instruments:- DM6446 & DM355.
557 To compile this driver as a module, choose M here: the
558 module will be called vpfe-capture.
560 config VIDEO_DM6446_CCDC
561 tristate "DM6446 CCDC HW module"
562 depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
563 select VIDEO_VPSS_SYSTEM
566 Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
567 with decoder modules such as TVP5146 over BT656 or
568 sensor module such as MT9T001 over a raw interface. This
569 module configures the interface and CCDC/ISIF to do
570 video frame capture from slave decoders.
572 To compile this driver as a module, choose M here: the
573 module will be called vpfe.
575 config VIDEO_DM355_CCDC
576 tristate "DM355 CCDC HW module"
577 depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
578 select VIDEO_VPSS_SYSTEM
581 Enables DM355 CCD hw module. DM355 CCDC hw interfaces
582 with decoder modules such as TVP5146 over BT656 or
583 sensor module such as MT9T001 over a raw interface. This
584 module configures the interface and CCDC/ISIF to do
585 video frame capture from a slave decoders
587 To compile this driver as a module, choose M here: the
588 module will be called vpfe.
590 source "drivers/media/video/bt8xx/Kconfig"
593 tristate "Mediavision Pro Movie Studio Video For Linux"
594 depends on ISA && VIDEO_V4L1
596 Say Y if you have such a thing.
598 To compile this driver as a module, choose M here: the
599 module will be called pms.
602 tristate "Quickcam BW Video For Linux"
603 depends on PARPORT && VIDEO_V4L1
605 Say Y have if you the black and white version of the QuickCam
606 camera. See the next option for the color version.
608 To compile this driver as a module, choose M here: the
609 module will be called bw-qcam.
612 tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
613 depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
615 This is the video4linux driver for the colour version of the
616 Connectix QuickCam. If you have one of these cameras, say Y here,
617 otherwise say N. This driver does not work with the original
618 monochrome QuickCam, QuickCam VC or QuickClip. It is also available
619 as a module (c-qcam).
620 Read <file:Documentation/video4linux/CQcam.txt> for more information.
623 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
624 depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
626 Video4linux driver for Winbond's w9966 based Webcams.
627 Currently tested with the LifeView FlyCam Supra.
628 If you have one of these cameras, say Y here
630 This driver is also available as a module (w9966).
632 Check out <file:Documentation/video4linux/w9966.txt> for more
636 tristate "CPiA Video For Linux"
637 depends on VIDEO_V4L1
639 This is the video4linux driver for cameras based on Vision's CPiA
640 (Colour Processor Interface ASIC), such as the Creative Labs Video
641 Blaster Webcam II. If you have one of these cameras, say Y here
642 and select parallel port and/or USB lowlevel support below,
643 otherwise say N. This will not work with the Creative Webcam III.
645 Please read <file:Documentation/video4linux/README.cpia> for more
648 This driver is also available as a module (cpia).
651 tristate "CPiA Parallel Port Lowlevel Support"
652 depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
654 This is the lowlevel parallel port support for cameras based on
655 Vision's CPiA (Colour Processor Interface ASIC), such as the
656 Creative Webcam II. If you have the parallel port version of one
657 of these cameras, say Y here, otherwise say N. It is also available
658 as a module (cpia_pp).
660 config VIDEO_CPIA_USB
661 tristate "CPiA USB Lowlevel Support"
662 depends on VIDEO_CPIA && USB
664 This is the lowlevel USB support for cameras based on Vision's CPiA
665 (Colour Processor Interface ASIC), such as the Creative Webcam II.
666 If you have the USB version of one of these cameras, say Y here,
667 otherwise say N. This will not work with the Creative Webcam III.
668 It is also available as a module (cpia_usb).
670 source "drivers/media/video/cpia2/Kconfig"
672 config VIDEO_SAA5246A
673 tristate "SAA5246A, SAA5281 Teletext processor"
674 depends on I2C && VIDEO_V4L2
676 Support for I2C bus based teletext using the SAA5246A or SAA5281
677 chip. Useful only if you live in Europe.
679 To compile this driver as a module, choose M here: the
680 module will be called saa5246a.
683 tristate "SAA5249 Teletext processor"
684 depends on I2C && VIDEO_V4L2
686 Support for I2C bus based teletext using the SAA5249 chip. At the
687 moment this is only useful on some European WinTV cards.
689 To compile this driver as a module, choose M here: the
690 module will be called saa5249.
693 tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
694 depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
695 select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
697 Say Y here to build in support for the Vino video input system found
698 on SGI Indy machines.
701 tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
702 depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
704 Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
705 driver for PCI. There is a product page at
706 <http://www.stradis.com/>.
708 source "drivers/media/video/zoran/Kconfig"
711 tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
712 depends on PCI && SONY_LAPTOP && VIDEO_V4L1
714 This is the video4linux driver for the Motion Eye camera found
715 in the Vaio Picturebook laptops. Please read the material in
716 <file:Documentation/video4linux/meye.txt> for more information.
718 If you say Y or M here, you need to say Y or M to "Sony Laptop
719 Extras" in the misc device section.
721 To compile this driver as a module, choose M here: the
722 module will be called meye.
724 source "drivers/media/video/saa7134/Kconfig"
727 tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
728 depends on PCI && VIDEO_V4L1 && I2C
729 select VIDEO_SAA7146_VV
731 select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
732 select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
733 select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
734 select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
736 This is a video4linux driver for the 'Multimedia eXtension Board'
737 TV card by Siemens-Nixdorf.
739 To compile this driver as a module, choose M here: the
740 module will be called mxb.
742 config VIDEO_HEXIUM_ORION
743 tristate "Hexium HV-PCI6 and Orion frame grabber"
744 depends on PCI && VIDEO_V4L2 && I2C
745 select VIDEO_SAA7146_VV
747 This is a video4linux driver for the Hexium HV-PCI6 and
748 Orion frame grabber cards by Hexium.
750 To compile this driver as a module, choose M here: the
751 module will be called hexium_orion.
753 config VIDEO_HEXIUM_GEMINI
754 tristate "Hexium Gemini frame grabber"
755 depends on PCI && VIDEO_V4L2 && I2C
756 select VIDEO_SAA7146_VV
758 This is a video4linux driver for the Hexium Gemini frame
759 grabber card by Hexium. Please note that the Gemini Dual
760 card is *not* fully supported.
762 To compile this driver as a module, choose M here: the
763 module will be called hexium_gemini.
765 source "drivers/media/video/cx88/Kconfig"
767 source "drivers/media/video/cx23885/Kconfig"
769 source "drivers/media/video/au0828/Kconfig"
771 source "drivers/media/video/ivtv/Kconfig"
773 source "drivers/media/video/cx18/Kconfig"
775 source "drivers/media/video/saa7164/Kconfig"
778 tristate "AR devices"
779 depends on M32R && VIDEO_V4L1
781 This is a video4linux driver for the Renesas AR (Artificial Retina)
784 config VIDEO_M32R_AR_M64278
785 tristate "AR device with color module M64278(VGA)"
786 depends on PLAT_M32700UT
789 This is a video4linux driver for the Renesas AR (Artificial
790 Retina) with M64278E-800 camera module.
791 This module supports VGA(640x480 pixels) resolutions.
793 To compile this driver as a module, choose M here: the
794 module will be called arv.
796 config VIDEO_CAFE_CCIC
797 tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
798 depends on PCI && I2C && VIDEO_V4L2
801 This is a video4linux2 driver for the Marvell 88ALP01 integrated
802 CMOS camera controller. This is the controller found on first-
803 generation OLPC systems.
806 tristate "SoC camera support"
807 depends on VIDEO_V4L2 && HAS_DMA && I2C
810 SoC Camera is a common API to several cameras, not connecting
811 over a bus like PCI or USB. For example some i2c camera connected
812 directly to the data bus of an SoC.
814 config SOC_CAMERA_MT9M001
815 tristate "mt9m001 support"
816 depends on SOC_CAMERA && I2C
817 select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
819 This driver supports MT9M001 cameras from Micron, monochrome
822 config SOC_CAMERA_MT9M111
823 tristate "mt9m111 and mt9m112 support"
824 depends on SOC_CAMERA && I2C
826 This driver supports MT9M111 and MT9M112 cameras from Micron
828 config SOC_CAMERA_MT9T031
829 tristate "mt9t031 support"
830 depends on SOC_CAMERA && I2C
832 This driver supports MT9T031 cameras from Micron.
834 config SOC_CAMERA_MT9V022
835 tristate "mt9v022 support"
836 depends on SOC_CAMERA && I2C
837 select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
839 This driver supports MT9V022 cameras from Micron
841 config SOC_CAMERA_TW9910
842 tristate "tw9910 support"
843 depends on SOC_CAMERA && I2C
845 This is a tw9910 video driver
847 config SOC_CAMERA_PLATFORM
848 tristate "platform camera support"
849 depends on SOC_CAMERA
851 This is a generic SoC camera platform driver, useful for testing
853 config SOC_CAMERA_OV772X
854 tristate "ov772x camera support"
855 depends on SOC_CAMERA && I2C
857 This is a ov772x camera driver
863 tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
864 depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
866 select VIDEOBUF_DMA_CONTIG
869 This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
875 tristate "i.MX3x Camera Sensor Interface driver"
876 depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
877 select VIDEOBUF_DMA_CONTIG
880 This is a v4l2 driver for the i.MX3x Camera Sensor Interface
883 tristate "PXA27x Quick Capture Interface driver"
884 depends on VIDEO_DEV && PXA27x && SOC_CAMERA
885 select VIDEOBUF_DMA_SG
887 This is a v4l2 driver for the PXA27x Quick Capture Interface
889 config VIDEO_SH_MOBILE_CEU
890 tristate "SuperH Mobile CEU Interface driver"
891 depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
892 select VIDEOBUF_DMA_CONTIG
894 This is a v4l2 driver for the SuperH Mobile CEU Interface
897 tristate "OMAP2 Camera Capture Interface driver"
898 depends on VIDEO_DEV && ARCH_OMAP2
899 select VIDEOBUF_DMA_SG
901 This is a v4l2 driver for the TI OMAP2 camera capture interface
904 # USB Multimedia device configuration
907 menuconfig V4L_USB_DRIVERS
908 bool "V4L USB devices"
912 if V4L_USB_DRIVERS && USB
914 source "drivers/media/video/uvc/Kconfig"
916 source "drivers/media/video/gspca/Kconfig"
918 source "drivers/media/video/pvrusb2/Kconfig"
920 source "drivers/media/video/hdpvr/Kconfig"
922 source "drivers/media/video/em28xx/Kconfig"
924 source "drivers/media/video/cx231xx/Kconfig"
926 source "drivers/media/video/usbvision/Kconfig"
928 source "drivers/media/video/usbvideo/Kconfig"
930 source "drivers/media/video/et61x251/Kconfig"
932 config VIDEO_OVCAMCHIP
933 tristate "OmniVision Camera Chip support"
934 depends on I2C && VIDEO_V4L1
936 Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
937 This driver is intended to be used with the ov511 and w9968cf USB
940 To compile this driver as a module, choose M here: the
941 module will be called ovcamchip.
944 tristate "USB W996[87]CF JPEG Dual Mode Camera support"
945 depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
947 Say Y here if you want support for cameras based on OV681 or
948 Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
950 This driver has an optional plugin, which is distributed as a
951 separate module only (released under GPL). It allows to use higher
952 resolutions and framerates, but cannot be included in the official
953 Linux kernel for performance purposes.
955 See <file:Documentation/video4linux/w9968cf.txt> for more info.
957 To compile this driver as a module, choose M here: the
958 module will be called w9968cf.
961 tristate "USB OV511 Camera support (DEPRECATED)"
962 depends on VIDEO_V4L1
964 This driver is DEPRECATED please use the gspca ov519 module
965 instead. Note that for the ov511 / ov518 support of the gspca module
966 you need atleast version 0.6.0 of libv4l.
968 Say Y here if you want to connect this type of camera to your
969 computer's USB port. See <file:Documentation/video4linux/ov511.txt>
970 for more information and for a list of supported cameras.
972 To compile this driver as a module, choose M here: the
973 module will be called ov511.
976 tristate "USB SE401 Camera support"
977 depends on VIDEO_V4L1
979 Say Y here if you want to connect this type of camera to your
980 computer's USB port. See <file:Documentation/video4linux/se401.txt>
981 for more information and for a list of supported cameras.
983 To compile this driver as a module, choose M here: the
984 module will be called se401.
986 source "drivers/media/video/sn9c102/Kconfig"
989 tristate "USB STV680 (Pencam) Camera support"
990 depends on VIDEO_V4L1
992 Say Y here if you want to connect this type of camera to your
993 computer's USB port. This includes the Pencam line of cameras.
994 See <file:Documentation/video4linux/stv680.txt> for more information
995 and for a list of supported cameras.
997 To compile this driver as a module, choose M here: the
998 module will be called stv680.
1000 source "drivers/media/video/zc0301/Kconfig"
1002 source "drivers/media/video/pwc/Kconfig"
1005 tristate "USB ZR364XX Camera support"
1006 depends on VIDEO_V4L2
1008 select VIDEOBUF_VMALLOC
1010 Say Y here if you want to connect this type of camera to your
1011 computer's USB port.
1012 See <file:Documentation/video4linux/zr364xx.txt> for more info
1013 and list of supported cameras.
1015 To compile this driver as a module, choose M here: the
1016 module will be called zr364xx.
1018 config USB_STKWEBCAM
1019 tristate "USB Syntek DC1125 Camera support"
1020 depends on VIDEO_V4L2 && EXPERIMENTAL
1022 Say Y here if you want to use this type of camera.
1023 Supported devices are typically found in some Asus laptops,
1024 with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
1025 may be supported by the stk11xx driver, from which this is
1026 derived, see http://stk11xx.sourceforge.net
1028 To compile this driver as a module, choose M here: the
1029 module will be called stkwebcam.
1032 tristate "USB Sensoray 2255 video capture device"
1033 depends on VIDEO_V4L2
1034 select VIDEOBUF_VMALLOC
1037 Say Y here if you want support for the Sensoray 2255 USB device.
1038 This driver can be compiled as a module, called s2255drv.
1040 endif # V4L_USB_DRIVERS
1041 endif # VIDEO_CAPTURE_DRIVERS