2 * cx18 init/start/stop/exit stream functions
4 * Derived from ivtv-streams.c
6 * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
7 * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
25 #include "cx18-driver.h"
27 #include "cx18-fileops.h"
28 #include "cx18-mailbox.h"
30 #include "cx18-queue.h"
31 #include "cx18-ioctl.h"
32 #include "cx18-streams.h"
33 #include "cx18-cards.h"
37 #define CX18_DSP0_INTERRUPT_MASK 0xd0004C
39 static struct v4l2_file_operations cx18_v4l2_enc_fops = {
41 .read = cx18_v4l2_read,
42 .open = cx18_v4l2_open,
43 /* FIXME change to video_ioctl2 if serialization lock can be removed */
44 .unlocked_ioctl = cx18_v4l2_ioctl,
45 .release = cx18_v4l2_close,
46 .poll = cx18_v4l2_enc_poll,
49 /* offset from 0 to register ts v4l2 minors on */
50 #define CX18_V4L2_ENC_TS_OFFSET 16
51 /* offset from 0 to register pcm v4l2 minors on */
52 #define CX18_V4L2_ENC_PCM_OFFSET 24
53 /* offset from 0 to register yuv v4l2 minors on */
54 #define CX18_V4L2_ENC_YUV_OFFSET 32
61 enum v4l2_buf_type buf_type;
62 } cx18_stream_info[] = {
63 { /* CX18_ENC_STREAM_TYPE_MPG */
66 PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE,
68 { /* CX18_ENC_STREAM_TYPE_TS */
71 PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE,
73 { /* CX18_ENC_STREAM_TYPE_YUV */
75 VFL_TYPE_GRABBER, CX18_V4L2_ENC_YUV_OFFSET,
76 PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE,
78 { /* CX18_ENC_STREAM_TYPE_VBI */
81 PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VBI_CAPTURE,
83 { /* CX18_ENC_STREAM_TYPE_PCM */
85 VFL_TYPE_GRABBER, CX18_V4L2_ENC_PCM_OFFSET,
86 PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_PRIVATE,
88 { /* CX18_ENC_STREAM_TYPE_IDX */
91 PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE,
93 { /* CX18_ENC_STREAM_TYPE_RAD */
96 PCI_DMA_NONE, V4L2_BUF_TYPE_PRIVATE,
100 static void cx18_stream_init(struct cx18 *cx, int type)
102 struct cx18_stream *s = &cx->streams[type];
103 struct video_device *video_dev = s->video_dev;
105 /* we need to keep video_dev, so restore it afterwards */
106 memset(s, 0, sizeof(*s));
107 s->video_dev = video_dev;
109 /* initialize cx18_stream fields */
113 s->name = cx18_stream_info[type].name;
114 s->handle = CX18_INVALID_TASK_HANDLE;
116 s->dma = cx18_stream_info[type].dma;
117 s->buffers = cx->stream_buffers[type];
118 s->buf_size = cx->stream_buf_size[type];
119 INIT_LIST_HEAD(&s->buf_pool);
121 s->mdl_size = s->buf_size * s->bufs_per_mdl;
123 init_waitqueue_head(&s->waitq);
125 spin_lock_init(&s->q_free.lock);
126 cx18_queue_init(&s->q_free);
127 spin_lock_init(&s->q_busy.lock);
128 cx18_queue_init(&s->q_busy);
129 spin_lock_init(&s->q_full.lock);
130 cx18_queue_init(&s->q_full);
131 spin_lock_init(&s->q_idle.lock);
132 cx18_queue_init(&s->q_idle);
134 INIT_WORK(&s->out_work_order, cx18_out_work_handler);
137 static int cx18_prep_dev(struct cx18 *cx, int type)
139 struct cx18_stream *s = &cx->streams[type];
140 u32 cap = cx->v4l2_cap;
141 int num_offset = cx18_stream_info[type].num_offset;
142 int num = cx->instance + cx18_first_minor + num_offset;
145 * These five fields are always initialized.
146 * For analog capture related streams, if video_dev == NULL then the
147 * stream is not in use.
148 * For the TS stream, if dvb == NULL then the stream is not in use.
149 * In those cases no other fields but these four can be used.
155 s->name = cx18_stream_info[type].name;
157 /* Check whether the radio is supported */
158 if (type == CX18_ENC_STREAM_TYPE_RAD && !(cap & V4L2_CAP_RADIO))
161 /* Check whether VBI is supported */
162 if (type == CX18_ENC_STREAM_TYPE_VBI &&
163 !(cap & (V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE)))
166 /* User explicitly selected 0 buffers for these streams, so don't
168 if (cx18_stream_info[type].dma != PCI_DMA_NONE &&
169 cx->stream_buffers[type] == 0) {
170 CX18_INFO("Disabled %s device\n", cx18_stream_info[type].name);
174 cx18_stream_init(cx, type);
176 /* Allocate the cx18_dvb struct only for the TS on cards with DTV */
177 if (type == CX18_ENC_STREAM_TYPE_TS) {
178 if (cx->card->hw_all & CX18_HW_DVB) {
179 s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL);
180 if (s->dvb == NULL) {
181 CX18_ERR("Couldn't allocate cx18_dvb structure"
182 " for %s\n", s->name);
186 /* Don't need buffers for the TS, if there is no DVB */
191 if (num_offset == -1)
194 /* allocate and initialize the v4l2 video device structure */
195 s->video_dev = video_device_alloc();
196 if (s->video_dev == NULL) {
197 CX18_ERR("Couldn't allocate v4l2 video_device for %s\n",
202 snprintf(s->video_dev->name, sizeof(s->video_dev->name), "%s %s",
203 cx->v4l2_dev.name, s->name);
205 s->video_dev->num = num;
206 s->video_dev->v4l2_dev = &cx->v4l2_dev;
207 s->video_dev->fops = &cx18_v4l2_enc_fops;
208 s->video_dev->release = video_device_release;
209 s->video_dev->tvnorms = V4L2_STD_ALL;
210 cx18_set_funcs(s->video_dev);
214 /* Initialize v4l2 variables and register v4l2 devices */
215 int cx18_streams_setup(struct cx18 *cx)
219 /* Setup V4L2 Devices */
220 for (type = 0; type < CX18_MAX_STREAMS; type++) {
222 ret = cx18_prep_dev(cx, type);
226 /* Allocate Stream */
227 ret = cx18_stream_alloc(&cx->streams[type]);
231 if (type == CX18_MAX_STREAMS)
234 /* One or more streams could not be initialized. Clean 'em all up. */
235 cx18_streams_cleanup(cx, 0);
239 static int cx18_reg_dev(struct cx18 *cx, int type)
241 struct cx18_stream *s = &cx->streams[type];
242 int vfl_type = cx18_stream_info[type].vfl_type;
246 if (type == CX18_ENC_STREAM_TYPE_TS && s->dvb != NULL) {
247 ret = cx18_dvb_register(s);
249 CX18_ERR("DVB failed to register\n");
254 if (s->video_dev == NULL)
257 num = s->video_dev->num;
258 /* card number + user defined offset + device offset */
259 if (type != CX18_ENC_STREAM_TYPE_MPG) {
260 struct cx18_stream *s_mpg = &cx->streams[CX18_ENC_STREAM_TYPE_MPG];
262 if (s_mpg->video_dev)
263 num = s_mpg->video_dev->num
264 + cx18_stream_info[type].num_offset;
266 video_set_drvdata(s->video_dev, s);
268 /* Register device. First try the desired minor, then any free one. */
269 ret = video_register_device_no_warn(s->video_dev, vfl_type, num);
271 CX18_ERR("Couldn't register v4l2 device for %s (device node number %d)\n",
273 video_device_release(s->video_dev);
278 name = video_device_node_name(s->video_dev);
281 case VFL_TYPE_GRABBER:
282 CX18_INFO("Registered device %s for %s (%d x %d.%02d kB)\n",
283 name, s->name, cx->stream_buffers[type],
284 cx->stream_buf_size[type] / 1024,
285 (cx->stream_buf_size[type] * 100 / 1024) % 100);
289 CX18_INFO("Registered device %s for %s\n", name, s->name);
293 if (cx->stream_buffers[type])
294 CX18_INFO("Registered device %s for %s "
296 name, s->name, cx->stream_buffers[type],
297 cx->stream_buf_size[type]);
299 CX18_INFO("Registered device %s for %s\n",
307 /* Register v4l2 devices */
308 int cx18_streams_register(struct cx18 *cx)
314 /* Register V4L2 devices */
315 for (type = 0; type < CX18_MAX_STREAMS; type++) {
316 err = cx18_reg_dev(cx, type);
324 /* One or more streams could not be initialized. Clean 'em all up. */
325 cx18_streams_cleanup(cx, 1);
329 /* Unregister v4l2 devices */
330 void cx18_streams_cleanup(struct cx18 *cx, int unregister)
332 struct video_device *vdev;
335 /* Teardown all streams */
336 for (type = 0; type < CX18_MAX_STREAMS; type++) {
338 /* The TS has a cx18_dvb structure, not a video_device */
339 if (type == CX18_ENC_STREAM_TYPE_TS) {
340 if (cx->streams[type].dvb != NULL) {
342 cx18_dvb_unregister(&cx->streams[type]);
343 kfree(cx->streams[type].dvb);
344 cx->streams[type].dvb = NULL;
345 cx18_stream_free(&cx->streams[type]);
350 /* No struct video_device, but can have buffers allocated */
351 if (type == CX18_ENC_STREAM_TYPE_IDX) {
352 if (cx->stream_buffers[type] != 0) {
353 cx->stream_buffers[type] = 0;
354 cx18_stream_free(&cx->streams[type]);
359 /* If struct video_device exists, can have buffers allocated */
360 vdev = cx->streams[type].video_dev;
362 cx->streams[type].video_dev = NULL;
366 cx18_stream_free(&cx->streams[type]);
368 /* Unregister or release device */
370 video_unregister_device(vdev);
372 video_device_release(vdev);
376 static void cx18_vbi_setup(struct cx18_stream *s)
378 struct cx18 *cx = s->cx;
379 int raw = cx18_raw_vbi(cx);
380 u32 data[CX2341X_MBOX_MAX_DATA];
385 cx->vbi.start[0] = 10;
386 cx->vbi.start[1] = 273;
387 } else { /* PAL/SECAM */
389 cx->vbi.start[0] = 6;
390 cx->vbi.start[1] = 318;
393 /* setup VBI registers */
395 v4l2_subdev_call(cx->sd_av, vbi, s_raw_fmt, &cx->vbi.in.fmt.vbi);
397 v4l2_subdev_call(cx->sd_av, vbi, s_sliced_fmt, &cx->vbi.in.fmt.sliced);
400 * Send the CX18_CPU_SET_RAW_VBI_PARAM API command to setup Encoder Raw
401 * VBI when the first analog capture channel starts, as once it starts
402 * (e.g. MPEG), we can't effect any change in the Encoder Raw VBI setup
403 * (i.e. for the VBI capture channels). We also send it for each
404 * analog capture channel anyway just to make sure we get the proper
408 lines = cx->vbi.count * 2;
411 * For 525/60 systems, according to the VIP 2 & BT.656 std:
412 * The EAV RP code's Field bit toggles on line 4, a few lines
413 * after the Vertcal Blank bit has already toggled.
414 * Tell the encoder to capture 21-4+1=18 lines per field,
415 * since we want lines 10 through 21.
417 * For 625/50 systems, according to the VIP 2 & BT.656 std:
418 * The EAV RP code's Field bit toggles on line 1, a few lines
419 * after the Vertcal Blank bit has already toggled.
420 * (We've actually set the digitizer so that the Field bit
421 * toggles on line 2.) Tell the encoder to capture 23-2+1=22
422 * lines per field, since we want lines 6 through 23.
424 lines = cx->is_60hz ? (21 - 4 + 1) * 2 : (23 - 2 + 1) * 2;
428 /* Lines per field */
429 data[1] = (lines / 2) | ((lines / 2) << 16);
431 data[2] = (raw ? vbi_active_samples
432 : (cx->is_60hz ? vbi_hblank_samples_60Hz
433 : vbi_hblank_samples_50Hz));
434 /* Every X number of frames a VBI interrupt arrives
435 (frames as in 25 or 30 fps) */
438 * Set the SAV/EAV RP codes to look for as start/stop points
439 * when in VIP-1.1 mode
443 * Start codes for beginning of "active" line in vertical blank
444 * 0x20 ( VerticalBlank )
445 * 0x60 ( EvenField VerticalBlank )
447 data[4] = 0x20602060;
449 * End codes for end of "active" raw lines and regular lines
450 * 0x30 ( VerticalBlank HorizontalBlank)
451 * 0x70 ( EvenField VerticalBlank HorizontalBlank)
452 * 0x90 (Task HorizontalBlank)
453 * 0xd0 (Task EvenField HorizontalBlank)
455 data[5] = 0x307090d0;
458 * End codes for active video, we want data in the hblank region
459 * 0xb0 (Task 0 VerticalBlank HorizontalBlank)
460 * 0xf0 (Task EvenField VerticalBlank HorizontalBlank)
462 * Since the V bit is only allowed to toggle in the EAV RP code,
463 * just before the first active region line, these two
465 * 0x90 (Task HorizontalBlank)
466 * 0xd0 (Task EvenField HorizontalBlank)
468 * We have set the digitzer such that we don't have to worry
469 * about these problem codes.
471 data[4] = 0xB0F0B0F0;
473 * Start codes for beginning of active line in vertical blank
474 * 0xa0 (Task VerticalBlank )
475 * 0xe0 (Task EvenField VerticalBlank )
477 data[5] = 0xA0E0A0E0;
480 CX18_DEBUG_INFO("Setup VBI h: %d lines %x bpl %d fr %d %x %x\n",
481 data[0], data[1], data[2], data[3], data[4], data[5]);
483 cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data);
486 void cx18_stream_rotate_idx_mdls(struct cx18 *cx)
488 struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
489 struct cx18_mdl *mdl;
491 if (!cx18_stream_enabled(s))
494 /* Return if the firmware is not running low on MDLs */
495 if ((atomic_read(&s->q_free.depth) + atomic_read(&s->q_busy.depth)) >=
496 CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN)
499 /* Return if there are no MDLs to rotate back to the firmware */
500 if (atomic_read(&s->q_full.depth) < 2)
504 * Take the oldest IDX MDL still holding data, and discard its index
505 * entries by scheduling the MDL to go back to the firmware
507 mdl = cx18_dequeue(s, &s->q_full);
509 cx18_enqueue(s, mdl, &s->q_free);
513 struct cx18_queue *_cx18_stream_put_mdl_fw(struct cx18_stream *s,
514 struct cx18_mdl *mdl)
516 struct cx18 *cx = s->cx;
517 struct cx18_queue *q;
519 /* Don't give it to the firmware, if we're not running a capture */
520 if (s->handle == CX18_INVALID_TASK_HANDLE ||
521 test_bit(CX18_F_S_STOPPING, &s->s_flags) ||
522 !test_bit(CX18_F_S_STREAMING, &s->s_flags))
523 return cx18_enqueue(s, mdl, &s->q_free);
525 q = cx18_enqueue(s, mdl, &s->q_busy);
527 return q; /* The firmware has the max MDLs it can handle */
529 cx18_mdl_sync_for_device(s, mdl);
530 cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
531 (void __iomem *) &cx->scb->cpu_mdl[mdl->id] - cx->enc_mem,
532 s->bufs_per_mdl, mdl->id, s->mdl_size);
537 void _cx18_stream_load_fw_queue(struct cx18_stream *s)
539 struct cx18_queue *q;
540 struct cx18_mdl *mdl;
542 if (atomic_read(&s->q_free.depth) == 0 ||
543 atomic_read(&s->q_busy.depth) >= CX18_MAX_FW_MDLS_PER_STREAM)
546 /* Move from q_free to q_busy notifying the firmware, until the limit */
548 mdl = cx18_dequeue(s, &s->q_free);
551 q = _cx18_stream_put_mdl_fw(s, mdl);
552 } while (atomic_read(&s->q_busy.depth) < CX18_MAX_FW_MDLS_PER_STREAM
556 void cx18_out_work_handler(struct work_struct *work)
558 struct cx18_stream *s =
559 container_of(work, struct cx18_stream, out_work_order);
561 _cx18_stream_load_fw_queue(s);
564 static void cx18_stream_configure_mdls(struct cx18_stream *s)
566 cx18_unload_queues(s);
569 case CX18_ENC_STREAM_TYPE_YUV:
571 * Height should be a multiple of 32 lines.
572 * Set the MDL size to the exact size needed for one frame.
573 * Use enough buffers per MDL to cover the MDL size
575 s->mdl_size = 720 * s->cx->params.height * 3 / 2;
576 s->bufs_per_mdl = s->mdl_size / s->buf_size;
577 if (s->mdl_size % s->buf_size)
580 case CX18_ENC_STREAM_TYPE_VBI:
582 if (cx18_raw_vbi(s->cx)) {
583 s->mdl_size = (s->cx->is_60hz ? 12 : 18)
584 * 2 * vbi_active_samples;
587 * See comment in cx18_vbi_setup() below about the
588 * extra lines we capture in sliced VBI mode due to
589 * the lines on which EAV RP codes toggle.
591 s->mdl_size = s->cx->is_60hz
592 ? (21 - 4 + 1) * 2 * vbi_hblank_samples_60Hz
593 : (23 - 2 + 1) * 2 * vbi_hblank_samples_50Hz;
598 s->mdl_size = s->buf_size * s->bufs_per_mdl;
605 int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
607 u32 data[MAX_MB_ARGUMENTS];
608 struct cx18 *cx = s->cx;
610 struct cx18_api_func_private priv;
611 struct cx18_stream *s_idx;
613 if (!cx18_stream_enabled(s))
616 CX18_DEBUG_INFO("Start encoder stream %s\n", s->name);
619 case CX18_ENC_STREAM_TYPE_MPG:
620 captype = CAPTURE_CHANNEL_TYPE_MPEG;
621 cx->mpg_data_received = cx->vbi_data_inserted = 0;
622 cx->dualwatch_jiffies = jiffies;
623 cx->dualwatch_stereo_mode = cx->params.audio_properties & 0x300;
624 cx->search_pack_header = 0;
627 case CX18_ENC_STREAM_TYPE_IDX:
628 captype = CAPTURE_CHANNEL_TYPE_INDEX;
630 case CX18_ENC_STREAM_TYPE_TS:
631 captype = CAPTURE_CHANNEL_TYPE_TS;
633 case CX18_ENC_STREAM_TYPE_YUV:
634 captype = CAPTURE_CHANNEL_TYPE_YUV;
636 case CX18_ENC_STREAM_TYPE_PCM:
637 captype = CAPTURE_CHANNEL_TYPE_PCM;
639 case CX18_ENC_STREAM_TYPE_VBI:
640 #ifdef CX18_ENCODER_PARSES_SLICED
641 captype = cx18_raw_vbi(cx) ?
642 CAPTURE_CHANNEL_TYPE_VBI : CAPTURE_CHANNEL_TYPE_SLICED_VBI;
645 * Currently we set things up so that Sliced VBI from the
646 * digitizer is handled as Raw VBI by the encoder
648 captype = CAPTURE_CHANNEL_TYPE_VBI;
651 cx->vbi.inserted_frame = 0;
652 memset(cx->vbi.sliced_mpeg_size,
653 0, sizeof(cx->vbi.sliced_mpeg_size));
659 /* Clear Streamoff flags in case left from last capture */
660 clear_bit(CX18_F_S_STREAMOFF, &s->s_flags);
662 cx18_vapi_result(cx, data, CX18_CREATE_TASK, 1, CPU_CMD_MASK_CAPTURE);
664 cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype);
667 * For everything but CAPTURE_CHANNEL_TYPE_TS, play it safe and
668 * set up all the parameters, as it is not obvious which parameters the
669 * firmware shares across capture channel types and which it does not.
671 * Some of the cx18_vapi() calls below apply to only certain capture
672 * channel types. We're hoping there's no harm in calling most of them
673 * anyway, as long as the values are all consistent. Setting some
674 * shared parameters will have no effect once an analog capture channel
675 * has started streaming.
677 if (captype != CAPTURE_CHANNEL_TYPE_TS) {
678 cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0);
679 cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1);
680 cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 8, 0);
681 cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 4, 1);
684 * Audio related reset according to
685 * Documentation/video4linux/cx2341x/fw-encoder-api.txt
687 if (atomic_read(&cx->ana_capturing) == 0)
688 cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2,
692 * Number of lines for Field 1 & Field 2 according to
693 * Documentation/video4linux/cx2341x/fw-encoder-api.txt
694 * Field 1 is 312 for 625 line systems in BT.656
695 * Field 2 is 313 for 625 line systems in BT.656
697 cx18_vapi(cx, CX18_CPU_SET_CAPTURE_LINE_NO, 3,
698 s->handle, 312, 313);
700 if (cx->v4l2_cap & V4L2_CAP_VBI_CAPTURE)
704 * Select to receive I, P, and B frame index entries, if the
705 * index stream is enabled. Otherwise disable index entry
708 s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX];
709 cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 2,
710 s->handle, cx18_stream_enabled(s_idx) ? 7 : 0);
712 /* Call out to the common CX2341x API setup for user controls */
715 cx2341x_update(&priv, cx18_api_func, NULL, &cx->params);
718 * When starting a capture and we're set for radio,
719 * ensure the video is muted, despite the user control.
721 if (!cx->params.video_mute &&
722 test_bit(CX18_F_I_RADIO_USER, &cx->i_flags))
723 cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle,
724 (cx->params.video_mute_yuv << 8) | 1);
727 if (atomic_read(&cx->tot_capturing) == 0) {
728 clear_bit(CX18_F_I_EOS, &cx->i_flags);
729 cx18_write_reg(cx, 7, CX18_DSP0_INTERRUPT_MASK);
732 cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle,
733 (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
734 (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
736 /* Init all the cpu_mdls for this stream */
737 cx18_stream_configure_mdls(s);
738 _cx18_stream_load_fw_queue(s);
741 if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) {
742 CX18_DEBUG_WARN("Error starting capture!\n");
743 /* Ensure we're really not capturing before releasing MDLs */
744 set_bit(CX18_F_S_STOPPING, &s->s_flags);
745 if (s->type == CX18_ENC_STREAM_TYPE_MPG)
746 cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, 1);
748 cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle);
749 clear_bit(CX18_F_S_STREAMING, &s->s_flags);
750 /* FIXME - CX18_F_S_STREAMOFF as well? */
751 cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle);
752 cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
753 s->handle = CX18_INVALID_TASK_HANDLE;
754 clear_bit(CX18_F_S_STOPPING, &s->s_flags);
755 if (atomic_read(&cx->tot_capturing) == 0) {
756 set_bit(CX18_F_I_EOS, &cx->i_flags);
757 cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK);
762 /* you're live! sit back and await interrupts :) */
763 if (captype != CAPTURE_CHANNEL_TYPE_TS)
764 atomic_inc(&cx->ana_capturing);
765 atomic_inc(&cx->tot_capturing);
768 EXPORT_SYMBOL(cx18_start_v4l2_encode_stream);
770 void cx18_stop_all_captures(struct cx18 *cx)
774 for (i = CX18_MAX_STREAMS - 1; i >= 0; i--) {
775 struct cx18_stream *s = &cx->streams[i];
777 if (!cx18_stream_enabled(s))
779 if (test_bit(CX18_F_S_STREAMING, &s->s_flags))
780 cx18_stop_v4l2_encode_stream(s, 0);
784 int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end)
786 struct cx18 *cx = s->cx;
789 if (!cx18_stream_enabled(s))
792 /* This function assumes that you are allowed to stop the capture
793 and that we are actually capturing */
795 CX18_DEBUG_INFO("Stop Capture\n");
797 if (atomic_read(&cx->tot_capturing) == 0)
800 set_bit(CX18_F_S_STOPPING, &s->s_flags);
801 if (s->type == CX18_ENC_STREAM_TYPE_MPG)
802 cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, !gop_end);
804 cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle);
808 if (s->type == CX18_ENC_STREAM_TYPE_MPG && gop_end) {
809 CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n");
812 if (s->type != CX18_ENC_STREAM_TYPE_TS)
813 atomic_dec(&cx->ana_capturing);
814 atomic_dec(&cx->tot_capturing);
816 /* Clear capture and no-read bits */
817 clear_bit(CX18_F_S_STREAMING, &s->s_flags);
819 /* Tell the CX23418 it can't use our buffers anymore */
820 cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle);
822 cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
823 s->handle = CX18_INVALID_TASK_HANDLE;
824 clear_bit(CX18_F_S_STOPPING, &s->s_flags);
826 if (atomic_read(&cx->tot_capturing) > 0)
829 cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK);
834 EXPORT_SYMBOL(cx18_stop_v4l2_encode_stream);
836 u32 cx18_find_handle(struct cx18 *cx)
840 /* find first available handle to be used for global settings */
841 for (i = 0; i < CX18_MAX_STREAMS; i++) {
842 struct cx18_stream *s = &cx->streams[i];
844 if (s->video_dev && (s->handle != CX18_INVALID_TASK_HANDLE))
847 return CX18_INVALID_TASK_HANDLE;
850 struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle)
853 struct cx18_stream *s;
855 if (handle == CX18_INVALID_TASK_HANDLE)
858 for (i = 0; i < CX18_MAX_STREAMS; i++) {
860 if (s->handle != handle)
862 if (cx18_stream_enabled(s))