2 handle em28xx IR remotes via linux kernel input layer.
4 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
5 Markus Rechberger <mrechberger@gmail.com>
6 Mauro Carvalho Chehab <mchehab@infradead.org>
7 Sascha Sommer <saschasommer@freenet.de>
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/interrupt.h>
28 #include <linux/usb.h>
29 #include <linux/slab.h>
33 #define EM28XX_SNAPSHOT_KEY KEY_CAMERA
34 #define EM28XX_SBUTTON_QUERY_INTERVAL 500
35 #define EM28XX_R0C_USBSUSP_SNAPSHOT 0x20
37 static unsigned int ir_debug;
38 module_param(ir_debug, int, 0644);
39 MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
41 #define MODULE_NAME "em28xx"
43 #define i2cdprintk(fmt, arg...) \
45 printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
48 #define dprintk(fmt, arg...) \
50 printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
53 /**********************************************************
54 Polling structure used by em28xx IR's
55 **********************************************************/
57 struct em28xx_ir_poll_result {
58 unsigned int toggle_bit:1;
59 unsigned int read_count:7;
61 u8 rc_data[4]; /* 1 byte on em2860/2880, 4 on em2874 */
70 /* poll external decoder */
72 struct delayed_work work;
73 unsigned int full_code:1;
74 unsigned int last_readcount;
76 int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
79 /**********************************************************
80 I2C IR based get keycodes - should be used with ir-kbd-i2c
81 **********************************************************/
83 static int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
88 if (1 != i2c_master_recv(ir->c, &b, 1)) {
89 i2cdprintk("read error\n");
93 /* it seems that 0xFE indicates that a button is still hold
94 down, while 0xff indicates that no button is hold
95 down. 0xfe sequences are sometimes interrupted by 0xFF */
97 i2cdprintk("key %02x\n", b);
111 static int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
113 unsigned char buf[2];
118 size = i2c_master_recv(ir->c, buf, sizeof(buf));
123 /* Does eliminate repeated parity code */
130 * Rearranges bits to the right order.
131 * The bit order were determined experimentally by using
132 * The original Hauppauge Grey IR and another RC5 that uses addr=0x08
133 * The RC5 code has 14 bits, but we've experimentally determined
134 * the meaning for only 11 bits.
135 * So, the code translation is not complete. Yet, it is enough to
136 * work with the provided RC5 IR.
139 ((buf[0] & 0x01) ? 0x0020 : 0) | /* 0010 0000 */
140 ((buf[0] & 0x02) ? 0x0010 : 0) | /* 0001 0000 */
141 ((buf[0] & 0x04) ? 0x0008 : 0) | /* 0000 1000 */
142 ((buf[0] & 0x08) ? 0x0004 : 0) | /* 0000 0100 */
143 ((buf[0] & 0x10) ? 0x0002 : 0) | /* 0000 0010 */
144 ((buf[0] & 0x20) ? 0x0001 : 0) | /* 0000 0001 */
145 ((buf[1] & 0x08) ? 0x1000 : 0) | /* 0001 0000 */
146 ((buf[1] & 0x10) ? 0x0800 : 0) | /* 0000 1000 */
147 ((buf[1] & 0x20) ? 0x0400 : 0) | /* 0000 0100 */
148 ((buf[1] & 0x40) ? 0x0200 : 0) | /* 0000 0010 */
149 ((buf[1] & 0x80) ? 0x0100 : 0); /* 0000 0001 */
151 i2cdprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x%02x)\n",
152 code, buf[1], buf[0]);
160 static int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
163 unsigned char buf[3];
167 if (3 != i2c_master_recv(ir->c, buf, 3)) {
168 i2cdprintk("read error\n");
172 i2cdprintk("key %02x\n", buf[2]&0x3f);
176 *ir_key = buf[2]&0x3f;
177 *ir_raw = buf[2]&0x3f;
182 static int em28xx_get_key_winfast_usbii_deluxe(struct IR_i2c *ir, u32 *ir_key,
185 unsigned char subaddr, keydetect, key;
187 struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, .buf = &subaddr, .len = 1},
189 { .addr = ir->c->addr, .flags = I2C_M_RD, .buf = &keydetect, .len = 1} };
192 if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
193 i2cdprintk("read error\n");
196 if (keydetect == 0x00)
201 if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
202 i2cdprintk("read error\n");
213 /**********************************************************
214 Poll based get keycode functions
215 **********************************************************/
217 /* This is for the em2860/em2880 */
218 static int default_polling_getkey(struct em28xx_IR *ir,
219 struct em28xx_ir_poll_result *poll_result)
221 struct em28xx *dev = ir->dev;
223 u8 msg[3] = { 0, 0, 0 };
225 /* Read key toggle, brand, and key code
226 on registers 0x45, 0x46 and 0x47
228 rc = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R45_IR,
233 /* Infrared toggle (Reg 0x45[7]) */
234 poll_result->toggle_bit = (msg[0] >> 7);
236 /* Infrared read count (Reg 0x45[6:0] */
237 poll_result->read_count = (msg[0] & 0x7f);
239 /* Remote Control Address (Reg 0x46) */
240 poll_result->rc_address = msg[1];
242 /* Remote Control Data (Reg 0x47) */
243 poll_result->rc_data[0] = msg[2];
248 static int em2874_polling_getkey(struct em28xx_IR *ir,
249 struct em28xx_ir_poll_result *poll_result)
251 struct em28xx *dev = ir->dev;
253 u8 msg[5] = { 0, 0, 0, 0, 0 };
255 /* Read key toggle, brand, and key code
258 rc = dev->em28xx_read_reg_req_len(dev, 0, EM2874_R51_IR,
263 /* Infrared toggle (Reg 0x51[7]) */
264 poll_result->toggle_bit = (msg[0] >> 7);
266 /* Infrared read count (Reg 0x51[6:0] */
267 poll_result->read_count = (msg[0] & 0x7f);
269 /* Remote Control Address (Reg 0x52) */
270 poll_result->rc_address = msg[1];
272 /* Remote Control Data (Reg 0x53-55) */
273 poll_result->rc_data[0] = msg[2];
274 poll_result->rc_data[1] = msg[3];
275 poll_result->rc_data[2] = msg[4];
280 /**********************************************************
281 Polling code for em28xx
282 **********************************************************/
284 static void em28xx_ir_handle_key(struct em28xx_IR *ir)
287 struct em28xx_ir_poll_result poll_result;
289 /* read the registers containing the IR status */
290 result = ir->get_key(ir, &poll_result);
291 if (unlikely(result < 0)) {
292 dprintk("ir->get_key() failed %d\n", result);
296 if (unlikely(poll_result.read_count != ir->last_readcount)) {
297 dprintk("%s: toggle: %d, count: %d, key 0x%02x%02x\n", __func__,
298 poll_result.toggle_bit, poll_result.read_count,
299 poll_result.rc_address, poll_result.rc_data[0]);
302 poll_result.rc_address << 8 |
303 poll_result.rc_data[0],
304 poll_result.toggle_bit);
307 poll_result.rc_data[0],
308 poll_result.toggle_bit);
310 if (ir->dev->chip_id == CHIP_ID_EM2874 ||
311 ir->dev->chip_id == CHIP_ID_EM2884)
312 /* The em2874 clears the readcount field every time the
313 register is read. The em2860/2880 datasheet says that it
314 is supposed to clear the readcount, but it doesn't. So with
315 the em2874, we are looking for a non-zero read count as
316 opposed to a readcount that is incrementing */
317 ir->last_readcount = 0;
319 ir->last_readcount = poll_result.read_count;
323 static void em28xx_ir_work(struct work_struct *work)
325 struct em28xx_IR *ir = container_of(work, struct em28xx_IR, work.work);
327 em28xx_ir_handle_key(ir);
328 schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
331 static int em28xx_ir_start(struct rc_dev *rc)
333 struct em28xx_IR *ir = rc->priv;
335 INIT_DELAYED_WORK(&ir->work, em28xx_ir_work);
336 schedule_delayed_work(&ir->work, 0);
341 static void em28xx_ir_stop(struct rc_dev *rc)
343 struct em28xx_IR *ir = rc->priv;
345 cancel_delayed_work_sync(&ir->work);
348 int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type)
351 struct em28xx_IR *ir = rc_dev->priv;
352 struct em28xx *dev = ir->dev;
353 u8 ir_config = EM2874_IR_RC5;
355 /* Adjust xclk based o IR table for RC5/NEC tables */
357 if (rc_type == RC_TYPE_RC5) {
358 dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
360 } else if (rc_type == RC_TYPE_NEC) {
361 dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
362 ir_config = EM2874_IR_NEC;
364 } else if (rc_type != RC_TYPE_UNKNOWN)
367 em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
368 EM28XX_XCLK_IR_RC5_MODE);
370 /* Setup the proper handler based on the chip */
371 switch (dev->chip_id) {
374 ir->get_key = default_polling_getkey;
378 case CHIP_ID_EM28174:
379 ir->get_key = em2874_polling_getkey;
380 em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1);
383 printk("Unrecognized em28xx chip id 0x%02x: IR not supported\n",
391 static void em28xx_register_i2c_ir(struct em28xx *dev)
393 /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
394 /* at address 0x18, so if that address is needed for another board in */
395 /* the future, please put it after 0x1f. */
396 struct i2c_board_info info;
397 const unsigned short addr_list[] = {
398 0x1f, 0x30, 0x47, I2C_CLIENT_END
401 memset(&info, 0, sizeof(struct i2c_board_info));
402 memset(&dev->init_data, 0, sizeof(dev->init_data));
403 strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
405 /* detect & configure */
406 switch (dev->model) {
407 case EM2800_BOARD_TERRATEC_CINERGY_200:
408 case EM2820_BOARD_TERRATEC_CINERGY_250:
409 dev->init_data.ir_codes = RC_MAP_EM_TERRATEC;
410 dev->init_data.get_key = em28xx_get_key_terratec;
411 dev->init_data.name = "i2c IR (EM28XX Terratec)";
413 case EM2820_BOARD_PINNACLE_USB_2:
414 dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY;
415 dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
416 dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
418 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
419 dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
420 dev->init_data.get_key = em28xx_get_key_em_haup;
421 dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
423 case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
424 dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
425 dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
426 dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
430 if (dev->init_data.name)
431 info.platform_data = &dev->init_data;
432 i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
435 /**********************************************************
436 Handle Webcam snapshot button
437 **********************************************************/
439 static void em28xx_query_sbutton(struct work_struct *work)
441 /* Poll the register and see if the button is depressed */
443 container_of(work, struct em28xx, sbutton_query_work.work);
446 ret = em28xx_read_reg(dev, EM28XX_R0C_USBSUSP);
448 if (ret & EM28XX_R0C_USBSUSP_SNAPSHOT) {
450 /* Button is depressed, clear the register */
451 cleared = ((u8) ret) & ~EM28XX_R0C_USBSUSP_SNAPSHOT;
452 em28xx_write_regs(dev, EM28XX_R0C_USBSUSP, &cleared, 1);
454 /* Not emulate the keypress */
455 input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY,
457 /* Now unpress the key */
458 input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY,
462 /* Schedule next poll */
463 schedule_delayed_work(&dev->sbutton_query_work,
464 msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL));
467 static void em28xx_register_snapshot_button(struct em28xx *dev)
469 struct input_dev *input_dev;
472 em28xx_info("Registering snapshot button...\n");
473 input_dev = input_allocate_device();
475 em28xx_errdev("input_allocate_device failed\n");
479 usb_make_path(dev->udev, dev->snapshot_button_path,
480 sizeof(dev->snapshot_button_path));
481 strlcat(dev->snapshot_button_path, "/sbutton",
482 sizeof(dev->snapshot_button_path));
483 INIT_DELAYED_WORK(&dev->sbutton_query_work, em28xx_query_sbutton);
485 input_dev->name = "em28xx snapshot button";
486 input_dev->phys = dev->snapshot_button_path;
487 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
488 set_bit(EM28XX_SNAPSHOT_KEY, input_dev->keybit);
489 input_dev->keycodesize = 0;
490 input_dev->keycodemax = 0;
491 input_dev->id.bustype = BUS_USB;
492 input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
493 input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
494 input_dev->id.version = 1;
495 input_dev->dev.parent = &dev->udev->dev;
497 err = input_register_device(input_dev);
499 em28xx_errdev("input_register_device failed\n");
500 input_free_device(input_dev);
504 dev->sbutton_input_dev = input_dev;
505 schedule_delayed_work(&dev->sbutton_query_work,
506 msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL));
511 static void em28xx_deregister_snapshot_button(struct em28xx *dev)
513 if (dev->sbutton_input_dev != NULL) {
514 em28xx_info("Deregistering snapshot button\n");
515 cancel_delayed_work_sync(&dev->sbutton_query_work);
516 input_unregister_device(dev->sbutton_input_dev);
517 dev->sbutton_input_dev = NULL;
522 int em28xx_ir_init(struct em28xx *dev)
524 struct em28xx_IR *ir;
528 if (dev->board.ir_codes == NULL) {
529 /* No remote control support */
533 ir = kzalloc(sizeof(*ir), GFP_KERNEL);
534 rc = rc_allocate_device();
538 /* record handles to ourself */
544 * em2874 supports more protocols. For now, let's just announce
545 * the two protocols that were already tested
547 rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
549 rc->change_protocol = em28xx_ir_change_protocol;
550 rc->open = em28xx_ir_start;
551 rc->close = em28xx_ir_stop;
553 /* By default, keep protocol field untouched */
554 err = em28xx_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
558 /* This is how often we ask the chip for IR information */
559 ir->polling = 100; /* ms */
561 /* init input device */
562 snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)",
565 usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
566 strlcat(ir->phys, "/input0", sizeof(ir->phys));
568 rc->input_name = ir->name;
569 rc->input_phys = ir->phys;
570 rc->input_id.bustype = BUS_USB;
571 rc->input_id.version = 1;
572 rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
573 rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
574 rc->dev.parent = &dev->udev->dev;
575 rc->map_name = dev->board.ir_codes;
576 rc->driver_name = MODULE_NAME;
579 err = rc_register_device(rc);
583 em28xx_register_i2c_ir(dev);
585 #if defined(CONFIG_MODULES) && defined(MODULE)
586 if (dev->board.has_ir_i2c)
587 request_module("ir-kbd-i2c");
589 if (dev->board.has_snapshot_button)
590 em28xx_register_snapshot_button(dev);
602 int em28xx_ir_fini(struct em28xx *dev)
604 struct em28xx_IR *ir = dev->ir;
606 em28xx_deregister_snapshot_button(dev);
608 /* skip detach on non attached boards */
613 rc_unregister_device(ir->rc);