2 * V4L2 Driver for i.MX27/i.MX25 camera host
4 * Copyright (C) 2008, Sascha Hauer, Pengutronix
5 * Copyright (C) 2010, Baruch Siach, Orex Computed Radiography
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
13 #include <linux/init.h>
14 #include <linux/module.h>
16 #include <linux/delay.h>
17 #include <linux/slab.h>
18 #include <linux/dma-mapping.h>
19 #include <linux/errno.h>
21 #include <linux/interrupt.h>
22 #include <linux/kernel.h>
24 #include <linux/moduleparam.h>
25 #include <linux/time.h>
26 #include <linux/version.h>
27 #include <linux/device.h>
28 #include <linux/platform_device.h>
29 #include <linux/mutex.h>
30 #include <linux/clk.h>
32 #include <media/v4l2-common.h>
33 #include <media/v4l2-dev.h>
34 #include <media/videobuf-dma-contig.h>
35 #include <media/soc_camera.h>
36 #include <media/soc_mediabus.h>
38 #include <linux/videodev2.h>
40 #include <mach/mx2_cam.h>
41 #ifdef CONFIG_MACH_MX27
42 #include <mach/dma-mx1-mx2.h>
44 #include <mach/hardware.h>
48 #define MX2_CAM_DRV_NAME "mx2-camera"
49 #define MX2_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
50 #define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera"
53 #define CSICR1_RESET_VAL 0x40000800
54 #define CSICR2_RESET_VAL 0x0
55 #define CSICR3_RESET_VAL 0x0
57 /* csi control reg 1 */
58 #define CSICR1_SWAP16_EN (1 << 31)
59 #define CSICR1_EXT_VSYNC (1 << 30)
60 #define CSICR1_EOF_INTEN (1 << 29)
61 #define CSICR1_PRP_IF_EN (1 << 28)
62 #define CSICR1_CCIR_MODE (1 << 27)
63 #define CSICR1_COF_INTEN (1 << 26)
64 #define CSICR1_SF_OR_INTEN (1 << 25)
65 #define CSICR1_RF_OR_INTEN (1 << 24)
66 #define CSICR1_STATFF_LEVEL (3 << 22)
67 #define CSICR1_STATFF_INTEN (1 << 21)
68 #define CSICR1_RXFF_LEVEL(l) (((l) & 3) << 19) /* MX27 */
69 #define CSICR1_FB2_DMA_INTEN (1 << 20) /* MX25 */
70 #define CSICR1_FB1_DMA_INTEN (1 << 19) /* MX25 */
71 #define CSICR1_RXFF_INTEN (1 << 18)
72 #define CSICR1_SOF_POL (1 << 17)
73 #define CSICR1_SOF_INTEN (1 << 16)
74 #define CSICR1_MCLKDIV(d) (((d) & 0xF) << 12)
75 #define CSICR1_HSYNC_POL (1 << 11)
76 #define CSICR1_CCIR_EN (1 << 10)
77 #define CSICR1_MCLKEN (1 << 9)
78 #define CSICR1_FCC (1 << 8)
79 #define CSICR1_PACK_DIR (1 << 7)
80 #define CSICR1_CLR_STATFIFO (1 << 6)
81 #define CSICR1_CLR_RXFIFO (1 << 5)
82 #define CSICR1_GCLK_MODE (1 << 4)
83 #define CSICR1_INV_DATA (1 << 3)
84 #define CSICR1_INV_PCLK (1 << 2)
85 #define CSICR1_REDGE (1 << 1)
87 #define SHIFT_STATFF_LEVEL 22
88 #define SHIFT_RXFF_LEVEL 19
89 #define SHIFT_MCLKDIV 12
92 #define CSICR3_FRMCNT (0xFFFF << 16)
93 #define CSICR3_FRMCNT_RST (1 << 15)
94 #define CSICR3_DMA_REFLASH_RFF (1 << 14)
95 #define CSICR3_DMA_REFLASH_SFF (1 << 13)
96 #define CSICR3_DMA_REQ_EN_RFF (1 << 12)
97 #define CSICR3_DMA_REQ_EN_SFF (1 << 11)
98 #define CSICR3_RXFF_LEVEL(l) (((l) & 7) << 4) /* MX25 */
99 #define CSICR3_CSI_SUP (1 << 3)
100 #define CSICR3_ZERO_PACK_EN (1 << 2)
101 #define CSICR3_ECC_INT_EN (1 << 1)
102 #define CSICR3_ECC_AUTO_EN (1 << 0)
104 #define SHIFT_FRMCNT 16
107 #define CSISR_SFF_OR_INT (1 << 25)
108 #define CSISR_RFF_OR_INT (1 << 24)
109 #define CSISR_STATFF_INT (1 << 21)
110 #define CSISR_DMA_TSF_FB2_INT (1 << 20) /* MX25 */
111 #define CSISR_DMA_TSF_FB1_INT (1 << 19) /* MX25 */
112 #define CSISR_RXFF_INT (1 << 18)
113 #define CSISR_EOF_INT (1 << 17)
114 #define CSISR_SOF_INT (1 << 16)
115 #define CSISR_F2_INT (1 << 15)
116 #define CSISR_F1_INT (1 << 14)
117 #define CSISR_COF_INT (1 << 13)
118 #define CSISR_ECC_INT (1 << 1)
119 #define CSISR_DRDY (1 << 0)
123 #define CSISR (cpu_is_mx27() ? 0x08 : 0x18)
124 #define CSISTATFIFO 0x0c
125 #define CSIRFIFO 0x10
126 #define CSIRXCNT 0x14
127 #define CSICR3 (cpu_is_mx27() ? 0x1C : 0x08)
128 #define CSIDMASA_STATFIFO 0x20
129 #define CSIDMATA_STATFIFO 0x24
130 #define CSIDMASA_FB1 0x28
131 #define CSIDMASA_FB2 0x2c
132 #define CSIFBUF_PARA 0x30
133 #define CSIIMAG_PARA 0x34
136 #define PRP_CNTL 0x00
137 #define PRP_INTR_CNTL 0x04
138 #define PRP_INTRSTATUS 0x08
139 #define PRP_SOURCE_Y_PTR 0x0c
140 #define PRP_SOURCE_CB_PTR 0x10
141 #define PRP_SOURCE_CR_PTR 0x14
142 #define PRP_DEST_RGB1_PTR 0x18
143 #define PRP_DEST_RGB2_PTR 0x1c
144 #define PRP_DEST_Y_PTR 0x20
145 #define PRP_DEST_CB_PTR 0x24
146 #define PRP_DEST_CR_PTR 0x28
147 #define PRP_SRC_FRAME_SIZE 0x2c
148 #define PRP_DEST_CH1_LINE_STRIDE 0x30
149 #define PRP_SRC_PIXEL_FORMAT_CNTL 0x34
150 #define PRP_CH1_PIXEL_FORMAT_CNTL 0x38
151 #define PRP_CH1_OUT_IMAGE_SIZE 0x3c
152 #define PRP_CH2_OUT_IMAGE_SIZE 0x40
153 #define PRP_SRC_LINE_STRIDE 0x44
154 #define PRP_CSC_COEF_012 0x48
155 #define PRP_CSC_COEF_345 0x4c
156 #define PRP_CSC_COEF_678 0x50
157 #define PRP_CH1_RZ_HORI_COEF1 0x54
158 #define PRP_CH1_RZ_HORI_COEF2 0x58
159 #define PRP_CH1_RZ_HORI_VALID 0x5c
160 #define PRP_CH1_RZ_VERT_COEF1 0x60
161 #define PRP_CH1_RZ_VERT_COEF2 0x64
162 #define PRP_CH1_RZ_VERT_VALID 0x68
163 #define PRP_CH2_RZ_HORI_COEF1 0x6c
164 #define PRP_CH2_RZ_HORI_COEF2 0x70
165 #define PRP_CH2_RZ_HORI_VALID 0x74
166 #define PRP_CH2_RZ_VERT_COEF1 0x78
167 #define PRP_CH2_RZ_VERT_COEF2 0x7c
168 #define PRP_CH2_RZ_VERT_VALID 0x80
170 #define PRP_CNTL_CH1EN (1 << 0)
171 #define PRP_CNTL_CH2EN (1 << 1)
172 #define PRP_CNTL_CSIEN (1 << 2)
173 #define PRP_CNTL_DATA_IN_YUV420 (0 << 3)
174 #define PRP_CNTL_DATA_IN_YUV422 (1 << 3)
175 #define PRP_CNTL_DATA_IN_RGB16 (2 << 3)
176 #define PRP_CNTL_DATA_IN_RGB32 (3 << 3)
177 #define PRP_CNTL_CH1_OUT_RGB8 (0 << 5)
178 #define PRP_CNTL_CH1_OUT_RGB16 (1 << 5)
179 #define PRP_CNTL_CH1_OUT_RGB32 (2 << 5)
180 #define PRP_CNTL_CH1_OUT_YUV422 (3 << 5)
181 #define PRP_CNTL_CH2_OUT_YUV420 (0 << 7)
182 #define PRP_CNTL_CH2_OUT_YUV422 (1 << 7)
183 #define PRP_CNTL_CH2_OUT_YUV444 (2 << 7)
184 #define PRP_CNTL_CH1_LEN (1 << 9)
185 #define PRP_CNTL_CH2_LEN (1 << 10)
186 #define PRP_CNTL_SKIP_FRAME (1 << 11)
187 #define PRP_CNTL_SWRST (1 << 12)
188 #define PRP_CNTL_CLKEN (1 << 13)
189 #define PRP_CNTL_WEN (1 << 14)
190 #define PRP_CNTL_CH1BYP (1 << 15)
191 #define PRP_CNTL_IN_TSKIP(x) ((x) << 16)
192 #define PRP_CNTL_CH1_TSKIP(x) ((x) << 19)
193 #define PRP_CNTL_CH2_TSKIP(x) ((x) << 22)
194 #define PRP_CNTL_INPUT_FIFO_LEVEL(x) ((x) << 25)
195 #define PRP_CNTL_RZ_FIFO_LEVEL(x) ((x) << 27)
196 #define PRP_CNTL_CH2B1EN (1 << 29)
197 #define PRP_CNTL_CH2B2EN (1 << 30)
198 #define PRP_CNTL_CH2FEN (1 << 31)
200 /* IRQ Enable and status register */
201 #define PRP_INTR_RDERR (1 << 0)
202 #define PRP_INTR_CH1WERR (1 << 1)
203 #define PRP_INTR_CH2WERR (1 << 2)
204 #define PRP_INTR_CH1FC (1 << 3)
205 #define PRP_INTR_CH2FC (1 << 5)
206 #define PRP_INTR_LBOVF (1 << 7)
207 #define PRP_INTR_CH2OVF (1 << 8)
209 #define mx27_camera_emma(pcdev) (cpu_is_mx27() && pcdev->use_emma)
211 #define MAX_VIDEO_MEM 16
213 struct mx2_camera_dev {
215 struct soc_camera_host soc_host;
216 struct soc_camera_device *icd;
217 struct clk *clk_csi, *clk_emma;
219 unsigned int irq_csi, irq_emma;
220 void __iomem *base_csi, *base_emma;
221 unsigned long base_dma;
223 struct mx2_camera_platform_data *pdata;
224 struct resource *res_csi, *res_emma;
225 unsigned long platform_flags;
227 struct list_head capture;
228 struct list_head active_bufs;
233 struct mx2_buffer *active;
234 struct mx2_buffer *fb1_active;
235 struct mx2_buffer *fb2_active;
241 void *discard_buffer;
242 dma_addr_t discard_buffer_dma;
246 /* buffer for one video frame */
248 /* common v4l buffer stuff -- must be first */
249 struct videobuf_buffer vb;
251 enum v4l2_mbus_pixelcode code;
256 static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev)
260 clk_disable(pcdev->clk_csi);
261 writel(0, pcdev->base_csi + CSICR1);
262 if (mx27_camera_emma(pcdev)) {
263 writel(0, pcdev->base_emma + PRP_CNTL);
264 } else if (cpu_is_mx25()) {
265 spin_lock_irqsave(&pcdev->lock, flags);
266 pcdev->fb1_active = NULL;
267 pcdev->fb2_active = NULL;
268 writel(0, pcdev->base_csi + CSIDMASA_FB1);
269 writel(0, pcdev->base_csi + CSIDMASA_FB2);
270 spin_unlock_irqrestore(&pcdev->lock, flags);
275 * The following two functions absolutely depend on the fact, that
276 * there can be only one camera on mx2 camera sensor interface
278 static int mx2_camera_add_device(struct soc_camera_device *icd)
280 struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
281 struct mx2_camera_dev *pcdev = ici->priv;
288 ret = clk_enable(pcdev->clk_csi);
292 csicr1 = CSICR1_MCLKEN;
294 if (mx27_camera_emma(pcdev)) {
295 csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC |
296 CSICR1_RXFF_LEVEL(0);
297 } else if (cpu_is_mx27())
298 csicr1 |= CSICR1_SOF_INTEN | CSICR1_RXFF_LEVEL(2);
300 pcdev->csicr1 = csicr1;
301 writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
305 dev_info(icd->dev.parent, "Camera driver attached to camera %d\n",
311 static void mx2_camera_remove_device(struct soc_camera_device *icd)
313 struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
314 struct mx2_camera_dev *pcdev = ici->priv;
316 BUG_ON(icd != pcdev->icd);
318 dev_info(icd->dev.parent, "Camera driver detached from camera %d\n",
321 mx2_camera_deactivate(pcdev);
323 if (pcdev->discard_buffer) {
324 dma_free_coherent(ici->v4l2_dev.dev, pcdev->discard_size,
325 pcdev->discard_buffer,
326 pcdev->discard_buffer_dma);
327 pcdev->discard_buffer = NULL;
333 #ifdef CONFIG_MACH_MX27
334 static void mx27_camera_dma_enable(struct mx2_camera_dev *pcdev)
338 imx_dma_enable(pcdev->dma);
340 tmp = readl(pcdev->base_csi + CSICR1);
341 tmp |= CSICR1_RF_OR_INTEN;
342 writel(tmp, pcdev->base_csi + CSICR1);
345 static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
347 struct mx2_camera_dev *pcdev = data;
348 u32 status = readl(pcdev->base_csi + CSISR);
350 if (status & CSISR_SOF_INT && pcdev->active) {
353 tmp = readl(pcdev->base_csi + CSICR1);
354 writel(tmp | CSICR1_CLR_RXFIFO, pcdev->base_csi + CSICR1);
355 mx27_camera_dma_enable(pcdev);
358 writel(CSISR_SOF_INT | CSISR_RFF_OR_INT, pcdev->base_csi + CSISR);
363 static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
367 #endif /* CONFIG_MACH_MX27 */
369 static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb,
372 struct videobuf_buffer *vb;
373 struct mx2_buffer *buf;
374 struct mx2_buffer **fb_active = fb == 1 ? &pcdev->fb1_active :
376 u32 fb_reg = fb == 1 ? CSIDMASA_FB1 : CSIDMASA_FB2;
379 spin_lock_irqsave(&pcdev->lock, flags);
381 vb = &(*fb_active)->vb;
382 dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
383 vb, vb->baddr, vb->bsize);
386 do_gettimeofday(&vb->ts);
391 if (list_empty(&pcdev->capture)) {
393 writel(0, pcdev->base_csi + fb_reg);
395 buf = list_entry(pcdev->capture.next, struct mx2_buffer,
398 list_del(&vb->queue);
399 vb->state = VIDEOBUF_ACTIVE;
400 writel(videobuf_to_dma_contig(vb), pcdev->base_csi + fb_reg);
405 spin_unlock_irqrestore(&pcdev->lock, flags);
408 static irqreturn_t mx25_camera_irq(int irq_csi, void *data)
410 struct mx2_camera_dev *pcdev = data;
411 u32 status = readl(pcdev->base_csi + CSISR);
413 if (status & CSISR_DMA_TSF_FB1_INT)
414 mx25_camera_frame_done(pcdev, 1, VIDEOBUF_DONE);
415 else if (status & CSISR_DMA_TSF_FB2_INT)
416 mx25_camera_frame_done(pcdev, 2, VIDEOBUF_DONE);
418 /* FIXME: handle CSISR_RFF_OR_INT */
420 writel(status, pcdev->base_csi + CSISR);
426 * Videobuf operations
428 static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
431 struct soc_camera_device *icd = vq->priv_data;
432 int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
433 icd->current_fmt->host_fmt);
435 dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
437 if (bytes_per_line < 0)
438 return bytes_per_line;
440 *size = bytes_per_line * icd->user_height;
444 if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
445 *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
450 static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf)
452 struct soc_camera_device *icd = vq->priv_data;
453 struct videobuf_buffer *vb = &buf->vb;
455 dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
456 vb, vb->baddr, vb->bsize);
459 * This waits until this buffer is out of danger, i.e., until it is no
460 * longer in STATE_QUEUED or STATE_ACTIVE
462 videobuf_waiton(vb, 0, 0);
464 videobuf_dma_contig_free(vq, vb);
465 dev_dbg(&icd->dev, "%s freed\n", __func__);
467 vb->state = VIDEOBUF_NEEDS_INIT;
470 static int mx2_videobuf_prepare(struct videobuf_queue *vq,
471 struct videobuf_buffer *vb, enum v4l2_field field)
473 struct soc_camera_device *icd = vq->priv_data;
474 struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
475 int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
476 icd->current_fmt->host_fmt);
479 dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
480 vb, vb->baddr, vb->bsize);
482 if (bytes_per_line < 0)
483 return bytes_per_line;
487 * This can be useful if you want to see if we actually fill
488 * the buffer with something
490 memset((void *)vb->baddr, 0xaa, vb->bsize);
493 if (buf->code != icd->current_fmt->code ||
494 vb->width != icd->user_width ||
495 vb->height != icd->user_height ||
496 vb->field != field) {
497 buf->code = icd->current_fmt->code;
498 vb->width = icd->user_width;
499 vb->height = icd->user_height;
501 vb->state = VIDEOBUF_NEEDS_INIT;
504 vb->size = bytes_per_line * vb->height;
505 if (vb->baddr && vb->bsize < vb->size) {
510 if (vb->state == VIDEOBUF_NEEDS_INIT) {
511 ret = videobuf_iolock(vq, vb, NULL);
515 vb->state = VIDEOBUF_PREPARED;
521 free_buffer(vq, buf);
526 static void mx2_videobuf_queue(struct videobuf_queue *vq,
527 struct videobuf_buffer *vb)
529 struct soc_camera_device *icd = vq->priv_data;
530 struct soc_camera_host *ici =
531 to_soc_camera_host(icd->dev.parent);
532 struct mx2_camera_dev *pcdev = ici->priv;
533 struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
536 dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
537 vb, vb->baddr, vb->bsize);
539 spin_lock_irqsave(&pcdev->lock, flags);
541 vb->state = VIDEOBUF_QUEUED;
542 list_add_tail(&vb->queue, &pcdev->capture);
544 if (mx27_camera_emma(pcdev)) {
546 #ifdef CONFIG_MACH_MX27
547 } else if (cpu_is_mx27()) {
550 if (pcdev->active == NULL) {
551 ret = imx_dma_setup_single(pcdev->dma,
552 videobuf_to_dma_contig(vb), vb->size,
553 (u32)pcdev->base_dma + 0x10,
556 vb->state = VIDEOBUF_ERROR;
561 vb->state = VIDEOBUF_ACTIVE;
565 } else { /* cpu_is_mx25() */
566 u32 csicr3, dma_inten = 0;
568 if (pcdev->fb1_active == NULL) {
569 writel(videobuf_to_dma_contig(vb),
570 pcdev->base_csi + CSIDMASA_FB1);
571 pcdev->fb1_active = buf;
572 dma_inten = CSICR1_FB1_DMA_INTEN;
573 } else if (pcdev->fb2_active == NULL) {
574 writel(videobuf_to_dma_contig(vb),
575 pcdev->base_csi + CSIDMASA_FB2);
576 pcdev->fb2_active = buf;
577 dma_inten = CSICR1_FB2_DMA_INTEN;
581 list_del(&vb->queue);
582 vb->state = VIDEOBUF_ACTIVE;
584 csicr3 = readl(pcdev->base_csi + CSICR3);
587 writel(csicr3 | CSICR3_DMA_REFLASH_RFF,
588 pcdev->base_csi + CSICR3);
590 /* clear & enable interrupts */
591 writel(dma_inten, pcdev->base_csi + CSISR);
592 pcdev->csicr1 |= dma_inten;
593 writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
596 csicr3 |= CSICR3_DMA_REQ_EN_RFF | CSICR3_RXFF_LEVEL(1);
597 writel(csicr3, pcdev->base_csi + CSICR3);
602 spin_unlock_irqrestore(&pcdev->lock, flags);
605 static void mx2_videobuf_release(struct videobuf_queue *vq,
606 struct videobuf_buffer *vb)
608 struct soc_camera_device *icd = vq->priv_data;
609 struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
610 struct mx2_camera_dev *pcdev = ici->priv;
611 struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
615 dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
616 vb, vb->baddr, vb->bsize);
619 case VIDEOBUF_ACTIVE:
620 dev_info(&icd->dev, "%s (active)\n", __func__);
622 case VIDEOBUF_QUEUED:
623 dev_info(&icd->dev, "%s (queued)\n", __func__);
625 case VIDEOBUF_PREPARED:
626 dev_info(&icd->dev, "%s (prepared)\n", __func__);
629 dev_info(&icd->dev, "%s (unknown) %d\n", __func__,
636 * Terminate only queued but inactive buffers. Active buffers are
637 * released when they become inactive after videobuf_waiton().
639 * FIXME: implement forced termination of active buffers, so that the
640 * user won't get stuck in an uninterruptible state. This requires a
641 * specific handling for each of the three DMA types that this driver
644 spin_lock_irqsave(&pcdev->lock, flags);
645 if (vb->state == VIDEOBUF_QUEUED) {
646 list_del(&vb->queue);
647 vb->state = VIDEOBUF_ERROR;
649 spin_unlock_irqrestore(&pcdev->lock, flags);
651 free_buffer(vq, buf);
654 static struct videobuf_queue_ops mx2_videobuf_ops = {
655 .buf_setup = mx2_videobuf_setup,
656 .buf_prepare = mx2_videobuf_prepare,
657 .buf_queue = mx2_videobuf_queue,
658 .buf_release = mx2_videobuf_release,
661 static void mx2_camera_init_videobuf(struct videobuf_queue *q,
662 struct soc_camera_device *icd)
664 struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
665 struct mx2_camera_dev *pcdev = ici->priv;
667 videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev,
668 &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
669 V4L2_FIELD_NONE, sizeof(struct mx2_buffer), icd);
672 #define MX2_BUS_FLAGS (SOCAM_DATAWIDTH_8 | \
674 SOCAM_VSYNC_ACTIVE_HIGH | \
675 SOCAM_VSYNC_ACTIVE_LOW | \
676 SOCAM_HSYNC_ACTIVE_HIGH | \
677 SOCAM_HSYNC_ACTIVE_LOW | \
678 SOCAM_PCLK_SAMPLE_RISING | \
679 SOCAM_PCLK_SAMPLE_FALLING | \
680 SOCAM_DATA_ACTIVE_HIGH | \
681 SOCAM_DATA_ACTIVE_LOW)
683 static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev)
688 cntl = readl(pcdev->base_emma + PRP_CNTL);
689 writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL);
690 while (count++ < 100) {
691 if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST))
700 static void mx27_camera_emma_buf_init(struct soc_camera_device *icd,
703 struct soc_camera_host *ici =
704 to_soc_camera_host(icd->dev.parent);
705 struct mx2_camera_dev *pcdev = ici->priv;
707 writel(pcdev->discard_buffer_dma,
708 pcdev->base_emma + PRP_DEST_RGB1_PTR);
709 writel(pcdev->discard_buffer_dma,
710 pcdev->base_emma + PRP_DEST_RGB2_PTR);
713 * We only use the EMMA engine to get rid of the broken
714 * DMA Engine. No color space consversion at the moment.
715 * We adjust incoming and outgoing pixelformat to rgb16
716 * and adjust the bytesperline accordingly.
718 writel(PRP_CNTL_CH1EN |
720 PRP_CNTL_DATA_IN_RGB16 |
721 PRP_CNTL_CH1_OUT_RGB16 |
724 PRP_CNTL_CH1_TSKIP(0) |
725 PRP_CNTL_IN_TSKIP(0),
726 pcdev->base_emma + PRP_CNTL);
728 writel(((bytesperline >> 1) << 16) | icd->user_height,
729 pcdev->base_emma + PRP_SRC_FRAME_SIZE);
730 writel(((bytesperline >> 1) << 16) | icd->user_height,
731 pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE);
733 pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE);
734 writel(0x2ca00565, /* RGB565 */
735 pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL);
736 writel(0x2ca00565, /* RGB565 */
737 pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL);
739 /* Enable interrupts */
740 writel(PRP_INTR_RDERR |
747 pcdev->base_emma + PRP_INTR_CNTL);
750 static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
753 struct soc_camera_host *ici =
754 to_soc_camera_host(icd->dev.parent);
755 struct mx2_camera_dev *pcdev = ici->priv;
756 unsigned long camera_flags, common_flags;
759 u32 csicr1 = pcdev->csicr1;
761 camera_flags = icd->ops->query_bus_param(icd);
763 common_flags = soc_camera_bus_param_compatible(camera_flags,
768 if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
769 (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
770 if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH)
771 common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
773 common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
776 if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
777 (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
778 if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING)
779 common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
781 common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
784 ret = icd->ops->set_bus_param(icd, common_flags);
788 if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
789 csicr1 |= CSICR1_INV_PCLK;
790 if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
791 csicr1 |= CSICR1_SOF_POL;
792 if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH)
793 csicr1 |= CSICR1_HSYNC_POL;
794 if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
795 csicr1 |= CSICR1_SWAP16_EN;
796 if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
797 csicr1 |= CSICR1_EXT_VSYNC;
798 if (pcdev->platform_flags & MX2_CAMERA_CCIR)
799 csicr1 |= CSICR1_CCIR_EN;
800 if (pcdev->platform_flags & MX2_CAMERA_CCIR_INTERLACE)
801 csicr1 |= CSICR1_CCIR_MODE;
802 if (pcdev->platform_flags & MX2_CAMERA_GATED_CLOCK)
803 csicr1 |= CSICR1_GCLK_MODE;
804 if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
805 csicr1 |= CSICR1_INV_DATA;
806 if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
807 csicr1 |= CSICR1_PACK_DIR;
809 pcdev->csicr1 = csicr1;
811 bytesperline = soc_mbus_bytes_per_line(icd->user_width,
812 icd->current_fmt->host_fmt);
813 if (bytesperline < 0)
816 if (mx27_camera_emma(pcdev)) {
817 ret = mx27_camera_emma_prp_reset(pcdev);
821 if (pcdev->discard_buffer)
822 dma_free_coherent(ici->v4l2_dev.dev,
823 pcdev->discard_size, pcdev->discard_buffer,
824 pcdev->discard_buffer_dma);
827 * I didn't manage to properly enable/disable the prp
828 * on a per frame basis during running transfers,
829 * thus we allocate a buffer here and use it to
830 * discard frames when no buffer is available.
831 * Feel free to work on this ;)
833 pcdev->discard_size = icd->user_height * bytesperline;
834 pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev,
835 pcdev->discard_size, &pcdev->discard_buffer_dma,
837 if (!pcdev->discard_buffer)
840 mx27_camera_emma_buf_init(icd, bytesperline);
841 } else if (cpu_is_mx25()) {
842 writel((bytesperline * icd->user_height) >> 2,
843 pcdev->base_csi + CSIRXCNT);
844 writel((bytesperline << 16) | icd->user_height,
845 pcdev->base_csi + CSIIMAG_PARA);
848 writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
853 static int mx2_camera_set_crop(struct soc_camera_device *icd,
856 struct v4l2_rect *rect = &a->c;
857 struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
858 struct v4l2_mbus_framefmt mf;
861 soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096);
862 soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096);
864 ret = v4l2_subdev_call(sd, video, s_crop, a);
868 /* The capture device might have changed its output */
869 ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
873 dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
874 mf.width, mf.height);
876 icd->user_width = mf.width;
877 icd->user_height = mf.height;
882 static int mx2_camera_set_fmt(struct soc_camera_device *icd,
883 struct v4l2_format *f)
885 struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
886 struct mx2_camera_dev *pcdev = ici->priv;
887 struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
888 const struct soc_camera_format_xlate *xlate;
889 struct v4l2_pix_format *pix = &f->fmt.pix;
890 struct v4l2_mbus_framefmt mf;
893 xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
895 dev_warn(icd->dev.parent, "Format %x not found\n",
900 /* eMMA can only do RGB565 */
901 if (mx27_camera_emma(pcdev) && pix->pixelformat != V4L2_PIX_FMT_RGB565)
904 mf.width = pix->width;
905 mf.height = pix->height;
906 mf.field = pix->field;
907 mf.colorspace = pix->colorspace;
908 mf.code = xlate->code;
910 ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
911 if (ret < 0 && ret != -ENOIOCTLCMD)
914 if (mf.code != xlate->code)
917 pix->width = mf.width;
918 pix->height = mf.height;
919 pix->field = mf.field;
920 pix->colorspace = mf.colorspace;
921 icd->current_fmt = xlate;
926 static int mx2_camera_try_fmt(struct soc_camera_device *icd,
927 struct v4l2_format *f)
929 struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
930 struct mx2_camera_dev *pcdev = ici->priv;
931 struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
932 const struct soc_camera_format_xlate *xlate;
933 struct v4l2_pix_format *pix = &f->fmt.pix;
934 struct v4l2_mbus_framefmt mf;
935 __u32 pixfmt = pix->pixelformat;
936 unsigned int width_limit;
939 xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
940 if (pixfmt && !xlate) {
941 dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
945 /* FIXME: implement MX27 limits */
947 /* eMMA can only do RGB565 */
948 if (mx27_camera_emma(pcdev) && pixfmt != V4L2_PIX_FMT_RGB565)
951 /* limit to MX25 hardware capabilities */
953 if (xlate->host_fmt->bits_per_sample <= 8)
954 width_limit = 0xffff * 4;
956 width_limit = 0xffff * 2;
957 /* CSIIMAG_PARA limit */
958 if (pix->width > width_limit)
959 pix->width = width_limit;
960 if (pix->height > 0xffff)
961 pix->height = 0xffff;
963 pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
965 if (pix->bytesperline < 0)
966 return pix->bytesperline;
967 pix->sizeimage = pix->height * pix->bytesperline;
968 if (pix->sizeimage > (4 * 0x3ffff)) { /* CSIRXCNT limit */
969 dev_warn(icd->dev.parent,
970 "Image size (%u) above limit\n",
976 /* limit to sensor capabilities */
977 mf.width = pix->width;
978 mf.height = pix->height;
979 mf.field = pix->field;
980 mf.colorspace = pix->colorspace;
981 mf.code = xlate->code;
983 ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
987 if (mf.field == V4L2_FIELD_ANY)
988 mf.field = V4L2_FIELD_NONE;
989 if (mf.field != V4L2_FIELD_NONE) {
990 dev_err(icd->dev.parent, "Field type %d unsupported.\n",
995 pix->width = mf.width;
996 pix->height = mf.height;
997 pix->field = mf.field;
998 pix->colorspace = mf.colorspace;
1003 static int mx2_camera_querycap(struct soc_camera_host *ici,
1004 struct v4l2_capability *cap)
1006 /* cap->name is set by the friendly caller:-> */
1007 strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card));
1008 cap->version = MX2_CAM_VERSION_CODE;
1009 cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
1014 static int mx2_camera_reqbufs(struct soc_camera_file *icf,
1015 struct v4l2_requestbuffers *p)
1019 for (i = 0; i < p->count; i++) {
1020 struct mx2_buffer *buf = container_of(icf->vb_vidq.bufs[i],
1021 struct mx2_buffer, vb);
1022 INIT_LIST_HEAD(&buf->vb.queue);
1028 #ifdef CONFIG_MACH_MX27
1029 static void mx27_camera_frame_done(struct mx2_camera_dev *pcdev, int state)
1031 struct videobuf_buffer *vb;
1032 struct mx2_buffer *buf;
1033 unsigned long flags;
1036 spin_lock_irqsave(&pcdev->lock, flags);
1038 if (!pcdev->active) {
1039 dev_err(pcdev->dev, "%s called with no active buffer!\n",
1044 vb = &pcdev->active->vb;
1045 buf = container_of(vb, struct mx2_buffer, vb);
1046 WARN_ON(list_empty(&vb->queue));
1047 dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
1048 vb, vb->baddr, vb->bsize);
1050 /* _init is used to debug races, see comment in pxa_camera_reqbufs() */
1051 list_del_init(&vb->queue);
1053 do_gettimeofday(&vb->ts);
1058 if (list_empty(&pcdev->capture)) {
1059 pcdev->active = NULL;
1063 pcdev->active = list_entry(pcdev->capture.next,
1064 struct mx2_buffer, vb.queue);
1066 vb = &pcdev->active->vb;
1067 vb->state = VIDEOBUF_ACTIVE;
1069 ret = imx_dma_setup_single(pcdev->dma, videobuf_to_dma_contig(vb),
1070 vb->size, (u32)pcdev->base_dma + 0x10, DMA_MODE_READ);
1073 vb->state = VIDEOBUF_ERROR;
1074 pcdev->active = NULL;
1079 spin_unlock_irqrestore(&pcdev->lock, flags);
1082 static void mx27_camera_dma_err_callback(int channel, void *data, int err)
1084 struct mx2_camera_dev *pcdev = data;
1086 mx27_camera_frame_done(pcdev, VIDEOBUF_ERROR);
1089 static void mx27_camera_dma_callback(int channel, void *data)
1091 struct mx2_camera_dev *pcdev = data;
1093 mx27_camera_frame_done(pcdev, VIDEOBUF_DONE);
1096 #define DMA_REQ_CSI_RX 31 /* FIXME: Add this to a resource */
1098 static int __devinit mx27_camera_dma_init(struct platform_device *pdev,
1099 struct mx2_camera_dev *pcdev)
1103 pcdev->dma = imx_dma_request_by_prio("CSI RX DMA", DMA_PRIO_HIGH);
1104 if (pcdev->dma < 0) {
1105 dev_err(&pdev->dev, "%s failed to request DMA channel\n",
1110 err = imx_dma_setup_handlers(pcdev->dma, mx27_camera_dma_callback,
1111 mx27_camera_dma_err_callback, pcdev);
1113 dev_err(&pdev->dev, "%s failed to set DMA callback\n",
1118 err = imx_dma_config_channel(pcdev->dma,
1119 IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
1120 IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
1123 dev_err(&pdev->dev, "%s failed to config DMA channel\n",
1128 imx_dma_config_burstlen(pcdev->dma, 64);
1133 imx_dma_free(pcdev->dma);
1137 #endif /* CONFIG_MACH_MX27 */
1139 static unsigned int mx2_camera_poll(struct file *file, poll_table *pt)
1141 struct soc_camera_file *icf = file->private_data;
1143 return videobuf_poll_stream(file, &icf->vb_vidq, pt);
1146 static struct soc_camera_host_ops mx2_soc_camera_host_ops = {
1147 .owner = THIS_MODULE,
1148 .add = mx2_camera_add_device,
1149 .remove = mx2_camera_remove_device,
1150 .set_fmt = mx2_camera_set_fmt,
1151 .set_crop = mx2_camera_set_crop,
1152 .try_fmt = mx2_camera_try_fmt,
1153 .init_videobuf = mx2_camera_init_videobuf,
1154 .reqbufs = mx2_camera_reqbufs,
1155 .poll = mx2_camera_poll,
1156 .querycap = mx2_camera_querycap,
1157 .set_bus_param = mx2_camera_set_bus_param,
1160 static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev,
1161 int bufnum, int state)
1163 struct mx2_buffer *buf;
1164 struct videobuf_buffer *vb;
1167 if (!list_empty(&pcdev->active_bufs)) {
1168 buf = list_entry(pcdev->active_bufs.next,
1169 struct mx2_buffer, vb.queue);
1171 BUG_ON(buf->bufnum != bufnum);
1175 phys = videobuf_to_dma_contig(vb);
1176 if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum)
1178 dev_err(pcdev->dev, "%p != %p\n", phys,
1179 readl(pcdev->base_emma +
1184 dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb,
1185 vb->baddr, vb->bsize);
1187 list_del(&vb->queue);
1189 do_gettimeofday(&vb->ts);
1195 if (list_empty(&pcdev->capture)) {
1196 writel(pcdev->discard_buffer_dma, pcdev->base_emma +
1197 PRP_DEST_RGB1_PTR + 4 * bufnum);
1201 buf = list_entry(pcdev->capture.next,
1202 struct mx2_buffer, vb.queue);
1204 buf->bufnum = bufnum;
1206 list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
1209 vb->state = VIDEOBUF_ACTIVE;
1211 phys = videobuf_to_dma_contig(vb);
1212 writel(phys, pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum);
1215 static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data)
1217 struct mx2_camera_dev *pcdev = data;
1218 unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS);
1219 struct mx2_buffer *buf;
1221 if (status & (1 << 7)) { /* overflow */
1224 * We only disable channel 1 here since this is the only
1227 * FIXME: the correct DMA overflow handling should be resetting
1228 * the buffer, returning an error frame, and continuing with
1231 cntl = readl(pcdev->base_emma + PRP_CNTL);
1232 writel(cntl & ~PRP_CNTL_CH1EN, pcdev->base_emma + PRP_CNTL);
1233 writel(cntl, pcdev->base_emma + PRP_CNTL);
1235 if ((status & (3 << 5)) == (3 << 5)
1236 && !list_empty(&pcdev->active_bufs)) {
1238 * Both buffers have triggered, process the one we're expecting
1241 buf = list_entry(pcdev->active_bufs.next,
1242 struct mx2_buffer, vb.queue);
1243 mx27_camera_frame_done_emma(pcdev, buf->bufnum, VIDEOBUF_DONE);
1244 status &= ~(1 << (6 - buf->bufnum)); /* mark processed */
1246 if (status & (1 << 6))
1247 mx27_camera_frame_done_emma(pcdev, 0, VIDEOBUF_DONE);
1248 if (status & (1 << 5))
1249 mx27_camera_frame_done_emma(pcdev, 1, VIDEOBUF_DONE);
1251 writel(status, pcdev->base_emma + PRP_INTRSTATUS);
1256 static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev)
1258 struct resource *res_emma = pcdev->res_emma;
1261 if (!request_mem_region(res_emma->start, resource_size(res_emma),
1262 MX2_CAM_DRV_NAME)) {
1267 pcdev->base_emma = ioremap(res_emma->start, resource_size(res_emma));
1268 if (!pcdev->base_emma) {
1273 err = request_irq(pcdev->irq_emma, mx27_camera_emma_irq, 0,
1274 MX2_CAM_DRV_NAME, pcdev);
1276 dev_err(pcdev->dev, "Camera EMMA interrupt register failed \n");
1280 pcdev->clk_emma = clk_get(NULL, "emma");
1281 if (IS_ERR(pcdev->clk_emma)) {
1282 err = PTR_ERR(pcdev->clk_emma);
1286 clk_enable(pcdev->clk_emma);
1288 err = mx27_camera_emma_prp_reset(pcdev);
1290 goto exit_clk_emma_put;
1295 clk_disable(pcdev->clk_emma);
1296 clk_put(pcdev->clk_emma);
1298 free_irq(pcdev->irq_emma, pcdev);
1300 iounmap(pcdev->base_emma);
1302 release_mem_region(res_emma->start, resource_size(res_emma));
1307 static int __devinit mx2_camera_probe(struct platform_device *pdev)
1309 struct mx2_camera_dev *pcdev;
1310 struct resource *res_csi, *res_emma;
1311 void __iomem *base_csi;
1312 int irq_csi, irq_emma;
1313 irq_handler_t mx2_cam_irq_handler = cpu_is_mx25() ? mx25_camera_irq
1317 dev_dbg(&pdev->dev, "initialising\n");
1319 res_csi = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1320 irq_csi = platform_get_irq(pdev, 0);
1321 if (res_csi == NULL || irq_csi < 0) {
1322 dev_err(&pdev->dev, "Missing platform resources data\n");
1327 pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
1329 dev_err(&pdev->dev, "Could not allocate pcdev\n");
1334 pcdev->clk_csi = clk_get(&pdev->dev, NULL);
1335 if (IS_ERR(pcdev->clk_csi)) {
1336 err = PTR_ERR(pcdev->clk_csi);
1340 dev_dbg(&pdev->dev, "Camera clock frequency: %ld\n",
1341 clk_get_rate(pcdev->clk_csi));
1343 /* Initialize DMA */
1344 #ifdef CONFIG_MACH_MX27
1345 if (cpu_is_mx27()) {
1346 err = mx27_camera_dma_init(pdev, pcdev);
1350 #endif /* CONFIG_MACH_MX27 */
1352 pcdev->res_csi = res_csi;
1353 pcdev->pdata = pdev->dev.platform_data;
1357 pcdev->platform_flags = pcdev->pdata->flags;
1359 rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2);
1364 err = clk_set_rate(pcdev->clk_csi, rate);
1369 INIT_LIST_HEAD(&pcdev->capture);
1370 INIT_LIST_HEAD(&pcdev->active_bufs);
1371 spin_lock_init(&pcdev->lock);
1374 * Request the regions.
1376 if (!request_mem_region(res_csi->start, resource_size(res_csi),
1377 MX2_CAM_DRV_NAME)) {
1382 base_csi = ioremap(res_csi->start, resource_size(res_csi));
1387 pcdev->irq_csi = irq_csi;
1388 pcdev->base_csi = base_csi;
1389 pcdev->base_dma = res_csi->start;
1390 pcdev->dev = &pdev->dev;
1392 err = request_irq(pcdev->irq_csi, mx2_cam_irq_handler, 0,
1393 MX2_CAM_DRV_NAME, pcdev);
1395 dev_err(pcdev->dev, "Camera interrupt register failed \n");
1399 if (cpu_is_mx27()) {
1401 res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1);
1402 irq_emma = platform_get_irq(pdev, 1);
1404 if (res_emma && irq_emma >= 0) {
1405 dev_info(&pdev->dev, "Using EMMA\n");
1406 pcdev->use_emma = 1;
1407 pcdev->res_emma = res_emma;
1408 pcdev->irq_emma = irq_emma;
1409 if (mx27_camera_emma_init(pcdev))
1414 pcdev->soc_host.drv_name = MX2_CAM_DRV_NAME,
1415 pcdev->soc_host.ops = &mx2_soc_camera_host_ops,
1416 pcdev->soc_host.priv = pcdev;
1417 pcdev->soc_host.v4l2_dev.dev = &pdev->dev;
1418 pcdev->soc_host.nr = pdev->id;
1419 err = soc_camera_host_register(&pcdev->soc_host);
1421 goto exit_free_emma;
1426 if (mx27_camera_emma(pcdev)) {
1427 free_irq(pcdev->irq_emma, pcdev);
1428 clk_disable(pcdev->clk_emma);
1429 clk_put(pcdev->clk_emma);
1430 iounmap(pcdev->base_emma);
1431 release_mem_region(res_emma->start, resource_size(res_emma));
1434 free_irq(pcdev->irq_csi, pcdev);
1438 release_mem_region(res_csi->start, resource_size(res_csi));
1440 #ifdef CONFIG_MACH_MX27
1442 imx_dma_free(pcdev->dma);
1444 clk_put(pcdev->clk_csi);
1445 #endif /* CONFIG_MACH_MX27 */
1452 static int __devexit mx2_camera_remove(struct platform_device *pdev)
1454 struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
1455 struct mx2_camera_dev *pcdev = container_of(soc_host,
1456 struct mx2_camera_dev, soc_host);
1457 struct resource *res;
1459 clk_put(pcdev->clk_csi);
1460 #ifdef CONFIG_MACH_MX27
1462 imx_dma_free(pcdev->dma);
1463 #endif /* CONFIG_MACH_MX27 */
1464 free_irq(pcdev->irq_csi, pcdev);
1465 if (mx27_camera_emma(pcdev))
1466 free_irq(pcdev->irq_emma, pcdev);
1468 soc_camera_host_unregister(&pcdev->soc_host);
1470 iounmap(pcdev->base_csi);
1472 if (mx27_camera_emma(pcdev)) {
1473 clk_disable(pcdev->clk_emma);
1474 clk_put(pcdev->clk_emma);
1475 iounmap(pcdev->base_emma);
1476 res = pcdev->res_emma;
1477 release_mem_region(res->start, resource_size(res));
1480 res = pcdev->res_csi;
1481 release_mem_region(res->start, resource_size(res));
1485 dev_info(&pdev->dev, "MX2 Camera driver unloaded\n");
1490 static struct platform_driver mx2_camera_driver = {
1492 .name = MX2_CAM_DRV_NAME,
1494 .remove = __devexit_p(mx2_camera_remove),
1498 static int __init mx2_camera_init(void)
1500 return platform_driver_probe(&mx2_camera_driver, &mx2_camera_probe);
1503 static void __exit mx2_camera_exit(void)
1505 return platform_driver_unregister(&mx2_camera_driver);
1508 module_init(mx2_camera_init);
1509 module_exit(mx2_camera_exit);
1511 MODULE_DESCRIPTION("i.MX27/i.MX25 SoC Camera Host driver");
1512 MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>");
1513 MODULE_LICENSE("GPL");