4 * Copyright (C) 2005 Mike Isely <isely@pobox.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 #include <linux/errno.h>
22 #include <linux/string.h>
23 #include <linux/slab.h>
24 #include <linux/firmware.h>
25 #include <linux/videodev2.h>
26 #include <media/v4l2-common.h>
27 #include <media/tuner.h>
29 #include "pvrusb2-std.h"
30 #include "pvrusb2-util.h"
31 #include "pvrusb2-hdw.h"
32 #include "pvrusb2-i2c-core.h"
33 #include "pvrusb2-eeprom.h"
34 #include "pvrusb2-hdw-internal.h"
35 #include "pvrusb2-encoder.h"
36 #include "pvrusb2-debug.h"
37 #include "pvrusb2-fx2-cmd.h"
38 #include "pvrusb2-wm8775.h"
39 #include "pvrusb2-video-v4l.h"
40 #include "pvrusb2-cx2584x-v4l.h"
41 #include "pvrusb2-cs53l32a.h"
42 #include "pvrusb2-audio.h"
44 #define TV_MIN_FREQ 55250000L
45 #define TV_MAX_FREQ 850000000L
47 /* This defines a minimum interval that the decoder must remain quiet
48 before we are allowed to start it running. */
49 #define TIME_MSEC_DECODER_WAIT 50
51 /* This defines a minimum interval that the decoder must be allowed to run
52 before we can safely begin using its streaming output. */
53 #define TIME_MSEC_DECODER_STABILIZATION_WAIT 300
55 /* This defines a minimum interval that the encoder must remain quiet
56 before we are allowed to configure it. */
57 #define TIME_MSEC_ENCODER_WAIT 50
59 /* This defines the minimum interval that the encoder must successfully run
60 before we consider that the encoder has run at least once since its
61 firmware has been loaded. This measurement is in important for cases
62 where we can't do something until we know that the encoder has been run
64 #define TIME_MSEC_ENCODER_OK 250
66 static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL};
67 static DEFINE_MUTEX(pvr2_unit_mtx);
70 static int procreload;
71 static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 };
72 static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 };
73 static int video_std[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 };
74 static int init_pause_msec;
76 module_param(ctlchg, int, S_IRUGO|S_IWUSR);
77 MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value");
78 module_param(init_pause_msec, int, S_IRUGO|S_IWUSR);
79 MODULE_PARM_DESC(init_pause_msec, "hardware initialization settling delay");
80 module_param(procreload, int, S_IRUGO|S_IWUSR);
81 MODULE_PARM_DESC(procreload,
82 "Attempt init failure recovery with firmware reload");
83 module_param_array(tuner, int, NULL, 0444);
84 MODULE_PARM_DESC(tuner,"specify installed tuner type");
85 module_param_array(video_std, int, NULL, 0444);
86 MODULE_PARM_DESC(video_std,"specify initial video standard");
87 module_param_array(tolerance, int, NULL, 0444);
88 MODULE_PARM_DESC(tolerance,"specify stream error tolerance");
90 /* US Broadcast channel 3 (61.25 MHz), to help with testing */
91 static int default_tv_freq = 61250000L;
92 /* 104.3 MHz, a usable FM station for my area */
93 static int default_radio_freq = 104300000L;
95 module_param_named(tv_freq, default_tv_freq, int, 0444);
96 MODULE_PARM_DESC(tv_freq, "specify initial television frequency");
97 module_param_named(radio_freq, default_radio_freq, int, 0444);
98 MODULE_PARM_DESC(radio_freq, "specify initial radio frequency");
100 #define PVR2_CTL_WRITE_ENDPOINT 0x01
101 #define PVR2_CTL_READ_ENDPOINT 0x81
103 #define PVR2_GPIO_IN 0x9008
104 #define PVR2_GPIO_OUT 0x900c
105 #define PVR2_GPIO_DIR 0x9020
107 #define trace_firmware(...) pvr2_trace(PVR2_TRACE_FIRMWARE,__VA_ARGS__)
109 #define PVR2_FIRMWARE_ENDPOINT 0x02
111 /* size of a firmware chunk */
112 #define FIRMWARE_CHUNK_SIZE 0x2000
114 typedef void (*pvr2_subdev_update_func)(struct pvr2_hdw *,
115 struct v4l2_subdev *);
117 static const pvr2_subdev_update_func pvr2_module_update_functions[] = {
118 [PVR2_CLIENT_ID_WM8775] = pvr2_wm8775_subdev_update,
119 [PVR2_CLIENT_ID_SAA7115] = pvr2_saa7115_subdev_update,
120 [PVR2_CLIENT_ID_MSP3400] = pvr2_msp3400_subdev_update,
121 [PVR2_CLIENT_ID_CX25840] = pvr2_cx25840_subdev_update,
122 [PVR2_CLIENT_ID_CS53L32A] = pvr2_cs53l32a_subdev_update,
125 static const char *module_names[] = {
126 [PVR2_CLIENT_ID_MSP3400] = "msp3400",
127 [PVR2_CLIENT_ID_CX25840] = "cx25840",
128 [PVR2_CLIENT_ID_SAA7115] = "saa7115",
129 [PVR2_CLIENT_ID_TUNER] = "tuner",
130 [PVR2_CLIENT_ID_DEMOD] = "tuner",
131 [PVR2_CLIENT_ID_CS53L32A] = "cs53l32a",
132 [PVR2_CLIENT_ID_WM8775] = "wm8775",
136 static const unsigned char *module_i2c_addresses[] = {
137 [PVR2_CLIENT_ID_TUNER] = "\x60\x61\x62\x63",
138 [PVR2_CLIENT_ID_DEMOD] = "\x43",
139 [PVR2_CLIENT_ID_MSP3400] = "\x40",
140 [PVR2_CLIENT_ID_SAA7115] = "\x21",
141 [PVR2_CLIENT_ID_WM8775] = "\x1b",
142 [PVR2_CLIENT_ID_CX25840] = "\x44",
143 [PVR2_CLIENT_ID_CS53L32A] = "\x11",
147 static const char *ir_scheme_names[] = {
148 [PVR2_IR_SCHEME_NONE] = "none",
149 [PVR2_IR_SCHEME_29XXX] = "29xxx",
150 [PVR2_IR_SCHEME_24XXX] = "24xxx (29xxx emulation)",
151 [PVR2_IR_SCHEME_24XXX_MCE] = "24xxx (MCE device)",
152 [PVR2_IR_SCHEME_ZILOG] = "Zilog",
156 /* Define the list of additional controls we'll dynamically construct based
157 on query of the cx2341x module. */
158 struct pvr2_mpeg_ids {
162 static const struct pvr2_mpeg_ids mpeg_ids[] = {
164 .strid = "audio_layer",
165 .id = V4L2_CID_MPEG_AUDIO_ENCODING,
167 .strid = "audio_bitrate",
168 .id = V4L2_CID_MPEG_AUDIO_L2_BITRATE,
170 /* Already using audio_mode elsewhere :-( */
171 .strid = "mpeg_audio_mode",
172 .id = V4L2_CID_MPEG_AUDIO_MODE,
174 .strid = "mpeg_audio_mode_extension",
175 .id = V4L2_CID_MPEG_AUDIO_MODE_EXTENSION,
177 .strid = "audio_emphasis",
178 .id = V4L2_CID_MPEG_AUDIO_EMPHASIS,
180 .strid = "audio_crc",
181 .id = V4L2_CID_MPEG_AUDIO_CRC,
183 .strid = "video_aspect",
184 .id = V4L2_CID_MPEG_VIDEO_ASPECT,
186 .strid = "video_b_frames",
187 .id = V4L2_CID_MPEG_VIDEO_B_FRAMES,
189 .strid = "video_gop_size",
190 .id = V4L2_CID_MPEG_VIDEO_GOP_SIZE,
192 .strid = "video_gop_closure",
193 .id = V4L2_CID_MPEG_VIDEO_GOP_CLOSURE,
195 .strid = "video_bitrate_mode",
196 .id = V4L2_CID_MPEG_VIDEO_BITRATE_MODE,
198 .strid = "video_bitrate",
199 .id = V4L2_CID_MPEG_VIDEO_BITRATE,
201 .strid = "video_bitrate_peak",
202 .id = V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
204 .strid = "video_temporal_decimation",
205 .id = V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION,
207 .strid = "stream_type",
208 .id = V4L2_CID_MPEG_STREAM_TYPE,
210 .strid = "video_spatial_filter_mode",
211 .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE,
213 .strid = "video_spatial_filter",
214 .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
216 .strid = "video_luma_spatial_filter_type",
217 .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE,
219 .strid = "video_chroma_spatial_filter_type",
220 .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE,
222 .strid = "video_temporal_filter_mode",
223 .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE,
225 .strid = "video_temporal_filter",
226 .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER,
228 .strid = "video_median_filter_type",
229 .id = V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE,
231 .strid = "video_luma_median_filter_top",
232 .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP,
234 .strid = "video_luma_median_filter_bottom",
235 .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM,
237 .strid = "video_chroma_median_filter_top",
238 .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP,
240 .strid = "video_chroma_median_filter_bottom",
241 .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM,
244 #define MPEGDEF_COUNT ARRAY_SIZE(mpeg_ids)
247 static const char *control_values_srate[] = {
248 [V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100] = "44.1 kHz",
249 [V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000] = "48 kHz",
250 [V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000] = "32 kHz",
255 static const char *control_values_input[] = {
256 [PVR2_CVAL_INPUT_TV] = "television", /*xawtv needs this name*/
257 [PVR2_CVAL_INPUT_DTV] = "dtv",
258 [PVR2_CVAL_INPUT_RADIO] = "radio",
259 [PVR2_CVAL_INPUT_SVIDEO] = "s-video",
260 [PVR2_CVAL_INPUT_COMPOSITE] = "composite",
264 static const char *control_values_audiomode[] = {
265 [V4L2_TUNER_MODE_MONO] = "Mono",
266 [V4L2_TUNER_MODE_STEREO] = "Stereo",
267 [V4L2_TUNER_MODE_LANG1] = "Lang1",
268 [V4L2_TUNER_MODE_LANG2] = "Lang2",
269 [V4L2_TUNER_MODE_LANG1_LANG2] = "Lang1+Lang2",
273 static const char *control_values_hsm[] = {
274 [PVR2_CVAL_HSM_FAIL] = "Fail",
275 [PVR2_CVAL_HSM_HIGH] = "High",
276 [PVR2_CVAL_HSM_FULL] = "Full",
280 static const char *pvr2_state_names[] = {
281 [PVR2_STATE_NONE] = "none",
282 [PVR2_STATE_DEAD] = "dead",
283 [PVR2_STATE_COLD] = "cold",
284 [PVR2_STATE_WARM] = "warm",
285 [PVR2_STATE_ERROR] = "error",
286 [PVR2_STATE_READY] = "ready",
287 [PVR2_STATE_RUN] = "run",
291 struct pvr2_fx2cmd_descdef {
296 static const struct pvr2_fx2cmd_descdef pvr2_fx2cmd_desc[] = {
297 {FX2CMD_MEM_WRITE_DWORD, "write encoder dword"},
298 {FX2CMD_MEM_READ_DWORD, "read encoder dword"},
299 {FX2CMD_HCW_ZILOG_RESET, "zilog IR reset control"},
300 {FX2CMD_MEM_READ_64BYTES, "read encoder 64bytes"},
301 {FX2CMD_REG_WRITE, "write encoder register"},
302 {FX2CMD_REG_READ, "read encoder register"},
303 {FX2CMD_MEMSEL, "encoder memsel"},
304 {FX2CMD_I2C_WRITE, "i2c write"},
305 {FX2CMD_I2C_READ, "i2c read"},
306 {FX2CMD_GET_USB_SPEED, "get USB speed"},
307 {FX2CMD_STREAMING_ON, "stream on"},
308 {FX2CMD_STREAMING_OFF, "stream off"},
309 {FX2CMD_FWPOST1, "fwpost1"},
310 {FX2CMD_POWER_OFF, "power off"},
311 {FX2CMD_POWER_ON, "power on"},
312 {FX2CMD_DEEP_RESET, "deep reset"},
313 {FX2CMD_GET_EEPROM_ADDR, "get rom addr"},
314 {FX2CMD_GET_IR_CODE, "get IR code"},
315 {FX2CMD_HCW_DEMOD_RESETIN, "hcw demod resetin"},
316 {FX2CMD_HCW_DTV_STREAMING_ON, "hcw dtv stream on"},
317 {FX2CMD_HCW_DTV_STREAMING_OFF, "hcw dtv stream off"},
318 {FX2CMD_ONAIR_DTV_STREAMING_ON, "onair dtv stream on"},
319 {FX2CMD_ONAIR_DTV_STREAMING_OFF, "onair dtv stream off"},
320 {FX2CMD_ONAIR_DTV_POWER_ON, "onair dtv power on"},
321 {FX2CMD_ONAIR_DTV_POWER_OFF, "onair dtv power off"},
325 static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v);
326 static void pvr2_hdw_state_sched(struct pvr2_hdw *);
327 static int pvr2_hdw_state_eval(struct pvr2_hdw *);
328 static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *,unsigned long);
329 static void pvr2_hdw_worker_poll(struct work_struct *work);
330 static int pvr2_hdw_wait(struct pvr2_hdw *,int state);
331 static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *);
332 static void pvr2_hdw_state_log_state(struct pvr2_hdw *);
333 static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl);
334 static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw);
335 static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw);
336 static void pvr2_hdw_internal_find_stdenum(struct pvr2_hdw *hdw);
337 static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw);
338 static void pvr2_hdw_quiescent_timeout(unsigned long);
339 static void pvr2_hdw_decoder_stabilization_timeout(unsigned long);
340 static void pvr2_hdw_encoder_wait_timeout(unsigned long);
341 static void pvr2_hdw_encoder_run_timeout(unsigned long);
342 static int pvr2_issue_simple_cmd(struct pvr2_hdw *,u32);
343 static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
344 unsigned int timeout,int probe_fl,
345 void *write_data,unsigned int write_len,
346 void *read_data,unsigned int read_len);
347 static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw);
350 static void trace_stbit(const char *name,int val)
352 pvr2_trace(PVR2_TRACE_STBITS,
353 "State bit %s <-- %s",
354 name,(val ? "true" : "false"));
357 static int ctrl_channelfreq_get(struct pvr2_ctrl *cptr,int *vp)
359 struct pvr2_hdw *hdw = cptr->hdw;
360 if ((hdw->freqProgSlot > 0) && (hdw->freqProgSlot <= FREQTABLE_SIZE)) {
361 *vp = hdw->freqTable[hdw->freqProgSlot-1];
368 static int ctrl_channelfreq_set(struct pvr2_ctrl *cptr,int m,int v)
370 struct pvr2_hdw *hdw = cptr->hdw;
371 unsigned int slotId = hdw->freqProgSlot;
372 if ((slotId > 0) && (slotId <= FREQTABLE_SIZE)) {
373 hdw->freqTable[slotId-1] = v;
374 /* Handle side effects correctly - if we're tuned to this
375 slot, then forgot the slot id relation since the stored
376 frequency has been changed. */
377 if (hdw->freqSelector) {
378 if (hdw->freqSlotRadio == slotId) {
379 hdw->freqSlotRadio = 0;
382 if (hdw->freqSlotTelevision == slotId) {
383 hdw->freqSlotTelevision = 0;
390 static int ctrl_channelprog_get(struct pvr2_ctrl *cptr,int *vp)
392 *vp = cptr->hdw->freqProgSlot;
396 static int ctrl_channelprog_set(struct pvr2_ctrl *cptr,int m,int v)
398 struct pvr2_hdw *hdw = cptr->hdw;
399 if ((v >= 0) && (v <= FREQTABLE_SIZE)) {
400 hdw->freqProgSlot = v;
405 static int ctrl_channel_get(struct pvr2_ctrl *cptr,int *vp)
407 struct pvr2_hdw *hdw = cptr->hdw;
408 *vp = hdw->freqSelector ? hdw->freqSlotRadio : hdw->freqSlotTelevision;
412 static int ctrl_channel_set(struct pvr2_ctrl *cptr,int m,int slotId)
415 struct pvr2_hdw *hdw = cptr->hdw;
416 if ((slotId < 0) || (slotId > FREQTABLE_SIZE)) return 0;
418 freq = hdw->freqTable[slotId-1];
420 pvr2_hdw_set_cur_freq(hdw,freq);
422 if (hdw->freqSelector) {
423 hdw->freqSlotRadio = slotId;
425 hdw->freqSlotTelevision = slotId;
430 static int ctrl_freq_get(struct pvr2_ctrl *cptr,int *vp)
432 *vp = pvr2_hdw_get_cur_freq(cptr->hdw);
436 static int ctrl_freq_is_dirty(struct pvr2_ctrl *cptr)
438 return cptr->hdw->freqDirty != 0;
441 static void ctrl_freq_clear_dirty(struct pvr2_ctrl *cptr)
443 cptr->hdw->freqDirty = 0;
446 static int ctrl_freq_set(struct pvr2_ctrl *cptr,int m,int v)
448 pvr2_hdw_set_cur_freq(cptr->hdw,v);
452 static int ctrl_cropl_min_get(struct pvr2_ctrl *cptr, int *left)
454 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
455 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
459 *left = cap->bounds.left;
463 static int ctrl_cropl_max_get(struct pvr2_ctrl *cptr, int *left)
465 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
466 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
470 *left = cap->bounds.left;
471 if (cap->bounds.width > cptr->hdw->cropw_val) {
472 *left += cap->bounds.width - cptr->hdw->cropw_val;
477 static int ctrl_cropt_min_get(struct pvr2_ctrl *cptr, int *top)
479 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
480 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
484 *top = cap->bounds.top;
488 static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top)
490 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
491 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
495 *top = cap->bounds.top;
496 if (cap->bounds.height > cptr->hdw->croph_val) {
497 *top += cap->bounds.height - cptr->hdw->croph_val;
502 static int ctrl_cropw_max_get(struct pvr2_ctrl *cptr, int *val)
504 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
505 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
510 if (cap->bounds.width > cptr->hdw->cropl_val) {
511 *val = cap->bounds.width - cptr->hdw->cropl_val;
516 static int ctrl_croph_max_get(struct pvr2_ctrl *cptr, int *val)
518 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
519 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
524 if (cap->bounds.height > cptr->hdw->cropt_val) {
525 *val = cap->bounds.height - cptr->hdw->cropt_val;
530 static int ctrl_get_cropcapbl(struct pvr2_ctrl *cptr, int *val)
532 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
533 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
537 *val = cap->bounds.left;
541 static int ctrl_get_cropcapbt(struct pvr2_ctrl *cptr, int *val)
543 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
544 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
548 *val = cap->bounds.top;
552 static int ctrl_get_cropcapbw(struct pvr2_ctrl *cptr, int *val)
554 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
555 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
559 *val = cap->bounds.width;
563 static int ctrl_get_cropcapbh(struct pvr2_ctrl *cptr, int *val)
565 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
566 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
570 *val = cap->bounds.height;
574 static int ctrl_get_cropcapdl(struct pvr2_ctrl *cptr, int *val)
576 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
577 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
581 *val = cap->defrect.left;
585 static int ctrl_get_cropcapdt(struct pvr2_ctrl *cptr, int *val)
587 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
588 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
592 *val = cap->defrect.top;
596 static int ctrl_get_cropcapdw(struct pvr2_ctrl *cptr, int *val)
598 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
599 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
603 *val = cap->defrect.width;
607 static int ctrl_get_cropcapdh(struct pvr2_ctrl *cptr, int *val)
609 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
610 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
614 *val = cap->defrect.height;
618 static int ctrl_get_cropcappan(struct pvr2_ctrl *cptr, int *val)
620 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
621 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
625 *val = cap->pixelaspect.numerator;
629 static int ctrl_get_cropcappad(struct pvr2_ctrl *cptr, int *val)
631 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
632 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
636 *val = cap->pixelaspect.denominator;
640 static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp)
642 /* Actual maximum depends on the video standard in effect. */
643 if (cptr->hdw->std_mask_cur & V4L2_STD_525_60) {
651 static int ctrl_vres_min_get(struct pvr2_ctrl *cptr,int *vp)
653 /* Actual minimum depends on device digitizer type. */
654 if (cptr->hdw->hdw_desc->flag_has_cx25840) {
662 static int ctrl_get_input(struct pvr2_ctrl *cptr,int *vp)
664 *vp = cptr->hdw->input_val;
668 static int ctrl_check_input(struct pvr2_ctrl *cptr,int v)
670 return ((1 << v) & cptr->hdw->input_allowed_mask) != 0;
673 static int ctrl_set_input(struct pvr2_ctrl *cptr,int m,int v)
675 return pvr2_hdw_set_input(cptr->hdw,v);
678 static int ctrl_isdirty_input(struct pvr2_ctrl *cptr)
680 return cptr->hdw->input_dirty != 0;
683 static void ctrl_cleardirty_input(struct pvr2_ctrl *cptr)
685 cptr->hdw->input_dirty = 0;
689 static int ctrl_freq_max_get(struct pvr2_ctrl *cptr, int *vp)
692 struct pvr2_hdw *hdw = cptr->hdw;
693 if (hdw->tuner_signal_stale) {
694 pvr2_hdw_status_poll(hdw);
696 fv = hdw->tuner_signal_info.rangehigh;
698 /* Safety fallback */
702 if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) {
711 static int ctrl_freq_min_get(struct pvr2_ctrl *cptr, int *vp)
714 struct pvr2_hdw *hdw = cptr->hdw;
715 if (hdw->tuner_signal_stale) {
716 pvr2_hdw_status_poll(hdw);
718 fv = hdw->tuner_signal_info.rangelow;
720 /* Safety fallback */
724 if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) {
733 static int ctrl_cx2341x_is_dirty(struct pvr2_ctrl *cptr)
735 return cptr->hdw->enc_stale != 0;
738 static void ctrl_cx2341x_clear_dirty(struct pvr2_ctrl *cptr)
740 cptr->hdw->enc_stale = 0;
741 cptr->hdw->enc_unsafe_stale = 0;
744 static int ctrl_cx2341x_get(struct pvr2_ctrl *cptr,int *vp)
747 struct v4l2_ext_controls cs;
748 struct v4l2_ext_control c1;
749 memset(&cs,0,sizeof(cs));
750 memset(&c1,0,sizeof(c1));
753 c1.id = cptr->info->v4l_id;
754 ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state, 0, &cs,
761 static int ctrl_cx2341x_set(struct pvr2_ctrl *cptr,int m,int v)
764 struct pvr2_hdw *hdw = cptr->hdw;
765 struct v4l2_ext_controls cs;
766 struct v4l2_ext_control c1;
767 memset(&cs,0,sizeof(cs));
768 memset(&c1,0,sizeof(c1));
771 c1.id = cptr->info->v4l_id;
773 ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state,
774 hdw->state_encoder_run, &cs,
777 /* Oops. cx2341x is telling us it's not safe to change
778 this control while we're capturing. Make a note of this
779 fact so that the pipeline will be stopped the next time
780 controls are committed. Then go on ahead and store this
782 ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state,
785 if (!ret) hdw->enc_unsafe_stale = !0;
792 static unsigned int ctrl_cx2341x_getv4lflags(struct pvr2_ctrl *cptr)
794 struct v4l2_queryctrl qctrl;
795 struct pvr2_ctl_info *info;
796 qctrl.id = cptr->info->v4l_id;
797 cx2341x_ctrl_query(&cptr->hdw->enc_ctl_state,&qctrl);
798 /* Strip out the const so we can adjust a function pointer. It's
799 OK to do this here because we know this is a dynamically created
800 control, so the underlying storage for the info pointer is (a)
801 private to us, and (b) not in read-only storage. Either we do
802 this or we significantly complicate the underlying control
804 info = (struct pvr2_ctl_info *)(cptr->info);
805 if (qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY) {
806 if (info->set_value) {
807 info->set_value = NULL;
810 if (!(info->set_value)) {
811 info->set_value = ctrl_cx2341x_set;
817 static int ctrl_streamingenabled_get(struct pvr2_ctrl *cptr,int *vp)
819 *vp = cptr->hdw->state_pipeline_req;
823 static int ctrl_masterstate_get(struct pvr2_ctrl *cptr,int *vp)
825 *vp = cptr->hdw->master_state;
829 static int ctrl_hsm_get(struct pvr2_ctrl *cptr,int *vp)
831 int result = pvr2_hdw_is_hsm(cptr->hdw);
832 *vp = PVR2_CVAL_HSM_FULL;
833 if (result < 0) *vp = PVR2_CVAL_HSM_FAIL;
834 if (result) *vp = PVR2_CVAL_HSM_HIGH;
838 static int ctrl_stdavail_get(struct pvr2_ctrl *cptr,int *vp)
840 *vp = cptr->hdw->std_mask_avail;
844 static int ctrl_stdavail_set(struct pvr2_ctrl *cptr,int m,int v)
846 struct pvr2_hdw *hdw = cptr->hdw;
848 ns = hdw->std_mask_avail;
849 ns = (ns & ~m) | (v & m);
850 if (ns == hdw->std_mask_avail) return 0;
851 hdw->std_mask_avail = ns;
852 pvr2_hdw_internal_set_std_avail(hdw);
853 pvr2_hdw_internal_find_stdenum(hdw);
857 static int ctrl_std_val_to_sym(struct pvr2_ctrl *cptr,int msk,int val,
858 char *bufPtr,unsigned int bufSize,
861 *len = pvr2_std_id_to_str(bufPtr,bufSize,msk & val);
865 static int ctrl_std_sym_to_val(struct pvr2_ctrl *cptr,
866 const char *bufPtr,unsigned int bufSize,
871 ret = pvr2_std_str_to_id(&id,bufPtr,bufSize);
872 if (ret < 0) return ret;
873 if (mskp) *mskp = id;
874 if (valp) *valp = id;
878 static int ctrl_stdcur_get(struct pvr2_ctrl *cptr,int *vp)
880 *vp = cptr->hdw->std_mask_cur;
884 static int ctrl_stdcur_set(struct pvr2_ctrl *cptr,int m,int v)
886 struct pvr2_hdw *hdw = cptr->hdw;
888 ns = hdw->std_mask_cur;
889 ns = (ns & ~m) | (v & m);
890 if (ns == hdw->std_mask_cur) return 0;
891 hdw->std_mask_cur = ns;
893 pvr2_hdw_internal_find_stdenum(hdw);
897 static int ctrl_stdcur_is_dirty(struct pvr2_ctrl *cptr)
899 return cptr->hdw->std_dirty != 0;
902 static void ctrl_stdcur_clear_dirty(struct pvr2_ctrl *cptr)
904 cptr->hdw->std_dirty = 0;
907 static int ctrl_signal_get(struct pvr2_ctrl *cptr,int *vp)
909 struct pvr2_hdw *hdw = cptr->hdw;
910 pvr2_hdw_status_poll(hdw);
911 *vp = hdw->tuner_signal_info.signal;
915 static int ctrl_audio_modes_present_get(struct pvr2_ctrl *cptr,int *vp)
918 unsigned int subchan;
919 struct pvr2_hdw *hdw = cptr->hdw;
920 pvr2_hdw_status_poll(hdw);
921 subchan = hdw->tuner_signal_info.rxsubchans;
922 if (subchan & V4L2_TUNER_SUB_MONO) {
923 val |= (1 << V4L2_TUNER_MODE_MONO);
925 if (subchan & V4L2_TUNER_SUB_STEREO) {
926 val |= (1 << V4L2_TUNER_MODE_STEREO);
928 if (subchan & V4L2_TUNER_SUB_LANG1) {
929 val |= (1 << V4L2_TUNER_MODE_LANG1);
931 if (subchan & V4L2_TUNER_SUB_LANG2) {
932 val |= (1 << V4L2_TUNER_MODE_LANG2);
939 static int ctrl_stdenumcur_set(struct pvr2_ctrl *cptr,int m,int v)
941 struct pvr2_hdw *hdw = cptr->hdw;
942 if (v < 0) return -EINVAL;
943 if (v > hdw->std_enum_cnt) return -EINVAL;
944 hdw->std_enum_cur = v;
947 if (hdw->std_mask_cur == hdw->std_defs[v].id) return 0;
948 hdw->std_mask_cur = hdw->std_defs[v].id;
954 static int ctrl_stdenumcur_get(struct pvr2_ctrl *cptr,int *vp)
956 *vp = cptr->hdw->std_enum_cur;
961 static int ctrl_stdenumcur_is_dirty(struct pvr2_ctrl *cptr)
963 return cptr->hdw->std_dirty != 0;
967 static void ctrl_stdenumcur_clear_dirty(struct pvr2_ctrl *cptr)
969 cptr->hdw->std_dirty = 0;
973 #define DEFINT(vmin,vmax) \
974 .type = pvr2_ctl_int, \
975 .def.type_int.min_value = vmin, \
976 .def.type_int.max_value = vmax
978 #define DEFENUM(tab) \
979 .type = pvr2_ctl_enum, \
980 .def.type_enum.count = ARRAY_SIZE(tab), \
981 .def.type_enum.value_names = tab
984 .type = pvr2_ctl_bool
986 #define DEFMASK(msk,tab) \
987 .type = pvr2_ctl_bitmask, \
988 .def.type_bitmask.valid_bits = msk, \
989 .def.type_bitmask.bit_names = tab
991 #define DEFREF(vname) \
992 .set_value = ctrl_set_##vname, \
993 .get_value = ctrl_get_##vname, \
994 .is_dirty = ctrl_isdirty_##vname, \
995 .clear_dirty = ctrl_cleardirty_##vname
998 #define VCREATE_FUNCS(vname) \
999 static int ctrl_get_##vname(struct pvr2_ctrl *cptr,int *vp) \
1000 {*vp = cptr->hdw->vname##_val; return 0;} \
1001 static int ctrl_set_##vname(struct pvr2_ctrl *cptr,int m,int v) \
1002 {cptr->hdw->vname##_val = v; cptr->hdw->vname##_dirty = !0; return 0;} \
1003 static int ctrl_isdirty_##vname(struct pvr2_ctrl *cptr) \
1004 {return cptr->hdw->vname##_dirty != 0;} \
1005 static void ctrl_cleardirty_##vname(struct pvr2_ctrl *cptr) \
1006 {cptr->hdw->vname##_dirty = 0;}
1008 VCREATE_FUNCS(brightness)
1009 VCREATE_FUNCS(contrast)
1010 VCREATE_FUNCS(saturation)
1012 VCREATE_FUNCS(volume)
1013 VCREATE_FUNCS(balance)
1015 VCREATE_FUNCS(treble)
1017 VCREATE_FUNCS(cropl)
1018 VCREATE_FUNCS(cropt)
1019 VCREATE_FUNCS(cropw)
1020 VCREATE_FUNCS(croph)
1021 VCREATE_FUNCS(audiomode)
1022 VCREATE_FUNCS(res_hor)
1023 VCREATE_FUNCS(res_ver)
1024 VCREATE_FUNCS(srate)
1026 /* Table definition of all controls which can be manipulated */
1027 static const struct pvr2_ctl_info control_defs[] = {
1029 .v4l_id = V4L2_CID_BRIGHTNESS,
1030 .desc = "Brightness",
1031 .name = "brightness",
1032 .default_value = 128,
1036 .v4l_id = V4L2_CID_CONTRAST,
1039 .default_value = 68,
1043 .v4l_id = V4L2_CID_SATURATION,
1044 .desc = "Saturation",
1045 .name = "saturation",
1046 .default_value = 64,
1050 .v4l_id = V4L2_CID_HUE,
1057 .v4l_id = V4L2_CID_AUDIO_VOLUME,
1060 .default_value = 62000,
1064 .v4l_id = V4L2_CID_AUDIO_BALANCE,
1069 DEFINT(-32768,32767),
1071 .v4l_id = V4L2_CID_AUDIO_BASS,
1076 DEFINT(-32768,32767),
1078 .v4l_id = V4L2_CID_AUDIO_TREBLE,
1083 DEFINT(-32768,32767),
1085 .v4l_id = V4L2_CID_AUDIO_MUTE,
1092 .desc = "Capture crop left margin",
1093 .name = "crop_left",
1094 .internal_id = PVR2_CID_CROPL,
1098 .get_min_value = ctrl_cropl_min_get,
1099 .get_max_value = ctrl_cropl_max_get,
1100 .get_def_value = ctrl_get_cropcapdl,
1102 .desc = "Capture crop top margin",
1104 .internal_id = PVR2_CID_CROPT,
1108 .get_min_value = ctrl_cropt_min_get,
1109 .get_max_value = ctrl_cropt_max_get,
1110 .get_def_value = ctrl_get_cropcapdt,
1112 .desc = "Capture crop width",
1113 .name = "crop_width",
1114 .internal_id = PVR2_CID_CROPW,
1115 .default_value = 720,
1117 .get_max_value = ctrl_cropw_max_get,
1118 .get_def_value = ctrl_get_cropcapdw,
1120 .desc = "Capture crop height",
1121 .name = "crop_height",
1122 .internal_id = PVR2_CID_CROPH,
1123 .default_value = 480,
1125 .get_max_value = ctrl_croph_max_get,
1126 .get_def_value = ctrl_get_cropcapdh,
1128 .desc = "Capture capability pixel aspect numerator",
1129 .name = "cropcap_pixel_numerator",
1130 .internal_id = PVR2_CID_CROPCAPPAN,
1131 .get_value = ctrl_get_cropcappan,
1133 .desc = "Capture capability pixel aspect denominator",
1134 .name = "cropcap_pixel_denominator",
1135 .internal_id = PVR2_CID_CROPCAPPAD,
1136 .get_value = ctrl_get_cropcappad,
1138 .desc = "Capture capability bounds top",
1139 .name = "cropcap_bounds_top",
1140 .internal_id = PVR2_CID_CROPCAPBT,
1141 .get_value = ctrl_get_cropcapbt,
1143 .desc = "Capture capability bounds left",
1144 .name = "cropcap_bounds_left",
1145 .internal_id = PVR2_CID_CROPCAPBL,
1146 .get_value = ctrl_get_cropcapbl,
1148 .desc = "Capture capability bounds width",
1149 .name = "cropcap_bounds_width",
1150 .internal_id = PVR2_CID_CROPCAPBW,
1151 .get_value = ctrl_get_cropcapbw,
1153 .desc = "Capture capability bounds height",
1154 .name = "cropcap_bounds_height",
1155 .internal_id = PVR2_CID_CROPCAPBH,
1156 .get_value = ctrl_get_cropcapbh,
1158 .desc = "Video Source",
1160 .internal_id = PVR2_CID_INPUT,
1161 .default_value = PVR2_CVAL_INPUT_TV,
1162 .check_value = ctrl_check_input,
1164 DEFENUM(control_values_input),
1166 .desc = "Audio Mode",
1167 .name = "audio_mode",
1168 .internal_id = PVR2_CID_AUDIOMODE,
1169 .default_value = V4L2_TUNER_MODE_STEREO,
1171 DEFENUM(control_values_audiomode),
1173 .desc = "Horizontal capture resolution",
1174 .name = "resolution_hor",
1175 .internal_id = PVR2_CID_HRES,
1176 .default_value = 720,
1180 .desc = "Vertical capture resolution",
1181 .name = "resolution_ver",
1182 .internal_id = PVR2_CID_VRES,
1183 .default_value = 480,
1186 /* Hook in check for video standard and adjust maximum
1187 depending on the standard. */
1188 .get_max_value = ctrl_vres_max_get,
1189 .get_min_value = ctrl_vres_min_get,
1191 .v4l_id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ,
1192 .default_value = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000,
1193 .desc = "Audio Sampling Frequency",
1196 DEFENUM(control_values_srate),
1198 .desc = "Tuner Frequency (Hz)",
1199 .name = "frequency",
1200 .internal_id = PVR2_CID_FREQUENCY,
1202 .set_value = ctrl_freq_set,
1203 .get_value = ctrl_freq_get,
1204 .is_dirty = ctrl_freq_is_dirty,
1205 .clear_dirty = ctrl_freq_clear_dirty,
1207 /* Hook in check for input value (tv/radio) and adjust
1208 max/min values accordingly */
1209 .get_max_value = ctrl_freq_max_get,
1210 .get_min_value = ctrl_freq_min_get,
1214 .set_value = ctrl_channel_set,
1215 .get_value = ctrl_channel_get,
1216 DEFINT(0,FREQTABLE_SIZE),
1218 .desc = "Channel Program Frequency",
1219 .name = "freq_table_value",
1220 .set_value = ctrl_channelfreq_set,
1221 .get_value = ctrl_channelfreq_get,
1223 /* Hook in check for input value (tv/radio) and adjust
1224 max/min values accordingly */
1225 .get_max_value = ctrl_freq_max_get,
1226 .get_min_value = ctrl_freq_min_get,
1228 .desc = "Channel Program ID",
1229 .name = "freq_table_channel",
1230 .set_value = ctrl_channelprog_set,
1231 .get_value = ctrl_channelprog_get,
1232 DEFINT(0,FREQTABLE_SIZE),
1234 .desc = "Streaming Enabled",
1235 .name = "streaming_enabled",
1236 .get_value = ctrl_streamingenabled_get,
1239 .desc = "USB Speed",
1240 .name = "usb_speed",
1241 .get_value = ctrl_hsm_get,
1242 DEFENUM(control_values_hsm),
1244 .desc = "Master State",
1245 .name = "master_state",
1246 .get_value = ctrl_masterstate_get,
1247 DEFENUM(pvr2_state_names),
1249 .desc = "Signal Present",
1250 .name = "signal_present",
1251 .get_value = ctrl_signal_get,
1254 .desc = "Audio Modes Present",
1255 .name = "audio_modes_present",
1256 .get_value = ctrl_audio_modes_present_get,
1257 /* For this type we "borrow" the V4L2_TUNER_MODE enum from
1258 v4l. Nothing outside of this module cares about this,
1259 but I reuse it in order to also reuse the
1260 control_values_audiomode string table. */
1261 DEFMASK(((1 << V4L2_TUNER_MODE_MONO)|
1262 (1 << V4L2_TUNER_MODE_STEREO)|
1263 (1 << V4L2_TUNER_MODE_LANG1)|
1264 (1 << V4L2_TUNER_MODE_LANG2)),
1265 control_values_audiomode),
1267 .desc = "Video Standards Available Mask",
1268 .name = "video_standard_mask_available",
1269 .internal_id = PVR2_CID_STDAVAIL,
1271 .get_value = ctrl_stdavail_get,
1272 .set_value = ctrl_stdavail_set,
1273 .val_to_sym = ctrl_std_val_to_sym,
1274 .sym_to_val = ctrl_std_sym_to_val,
1275 .type = pvr2_ctl_bitmask,
1277 .desc = "Video Standards In Use Mask",
1278 .name = "video_standard_mask_active",
1279 .internal_id = PVR2_CID_STDCUR,
1281 .get_value = ctrl_stdcur_get,
1282 .set_value = ctrl_stdcur_set,
1283 .is_dirty = ctrl_stdcur_is_dirty,
1284 .clear_dirty = ctrl_stdcur_clear_dirty,
1285 .val_to_sym = ctrl_std_val_to_sym,
1286 .sym_to_val = ctrl_std_sym_to_val,
1287 .type = pvr2_ctl_bitmask,
1289 .desc = "Video Standard Name",
1290 .name = "video_standard",
1291 .internal_id = PVR2_CID_STDENUM,
1293 .get_value = ctrl_stdenumcur_get,
1294 .set_value = ctrl_stdenumcur_set,
1295 .is_dirty = ctrl_stdenumcur_is_dirty,
1296 .clear_dirty = ctrl_stdenumcur_clear_dirty,
1297 .type = pvr2_ctl_enum,
1301 #define CTRLDEF_COUNT ARRAY_SIZE(control_defs)
1304 const char *pvr2_config_get_name(enum pvr2_config cfg)
1307 case pvr2_config_empty: return "empty";
1308 case pvr2_config_mpeg: return "mpeg";
1309 case pvr2_config_vbi: return "vbi";
1310 case pvr2_config_pcm: return "pcm";
1311 case pvr2_config_rawvideo: return "raw video";
1317 struct usb_device *pvr2_hdw_get_dev(struct pvr2_hdw *hdw)
1319 return hdw->usb_dev;
1323 unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *hdw)
1325 return hdw->serial_number;
1329 const char *pvr2_hdw_get_bus_info(struct pvr2_hdw *hdw)
1331 return hdw->bus_info;
1335 const char *pvr2_hdw_get_device_identifier(struct pvr2_hdw *hdw)
1337 return hdw->identifier;
1341 unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *hdw)
1343 return hdw->freqSelector ? hdw->freqValTelevision : hdw->freqValRadio;
1346 /* Set the currently tuned frequency and account for all possible
1347 driver-core side effects of this action. */
1348 static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *hdw,unsigned long val)
1350 if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
1351 if (hdw->freqSelector) {
1352 /* Swing over to radio frequency selection */
1353 hdw->freqSelector = 0;
1354 hdw->freqDirty = !0;
1356 if (hdw->freqValRadio != val) {
1357 hdw->freqValRadio = val;
1358 hdw->freqSlotRadio = 0;
1359 hdw->freqDirty = !0;
1362 if (!(hdw->freqSelector)) {
1363 /* Swing over to television frequency selection */
1364 hdw->freqSelector = 1;
1365 hdw->freqDirty = !0;
1367 if (hdw->freqValTelevision != val) {
1368 hdw->freqValTelevision = val;
1369 hdw->freqSlotTelevision = 0;
1370 hdw->freqDirty = !0;
1375 int pvr2_hdw_get_unit_number(struct pvr2_hdw *hdw)
1377 return hdw->unit_number;
1381 /* Attempt to locate one of the given set of files. Messages are logged
1382 appropriate to what has been found. The return value will be 0 or
1383 greater on success (it will be the index of the file name found) and
1384 fw_entry will be filled in. Otherwise a negative error is returned on
1385 failure. If the return value is -ENOENT then no viable firmware file
1386 could be located. */
1387 static int pvr2_locate_firmware(struct pvr2_hdw *hdw,
1388 const struct firmware **fw_entry,
1389 const char *fwtypename,
1390 unsigned int fwcount,
1391 const char *fwnames[])
1395 for (idx = 0; idx < fwcount; idx++) {
1396 ret = request_firmware(fw_entry,
1398 &hdw->usb_dev->dev);
1400 trace_firmware("Located %s firmware: %s;"
1406 if (ret == -ENOENT) continue;
1407 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1408 "request_firmware fatal error with code=%d",ret);
1411 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1413 " Device %s firmware"
1414 " seems to be missing.",
1416 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1417 "Did you install the pvrusb2 firmware files"
1418 " in their proper location?");
1420 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1421 "request_firmware unable to locate %s file %s",
1422 fwtypename,fwnames[0]);
1424 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1425 "request_firmware unable to locate"
1426 " one of the following %s files:",
1428 for (idx = 0; idx < fwcount; idx++) {
1429 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1430 "request_firmware: Failed to find %s",
1439 * pvr2_upload_firmware1().
1441 * Send the 8051 firmware to the device. After the upload, arrange for
1442 * device to re-enumerate.
1444 * NOTE : the pointer to the firmware data given by request_firmware()
1445 * is not suitable for an usb transaction.
1448 static int pvr2_upload_firmware1(struct pvr2_hdw *hdw)
1450 const struct firmware *fw_entry = NULL;
1453 unsigned int fwsize;
1457 if (!hdw->hdw_desc->fx2_firmware.cnt) {
1458 hdw->fw1_state = FW1_STATE_OK;
1459 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1460 "Connected device type defines"
1461 " no firmware to upload; ignoring firmware");
1465 hdw->fw1_state = FW1_STATE_FAILED; // default result
1467 trace_firmware("pvr2_upload_firmware1");
1469 ret = pvr2_locate_firmware(hdw,&fw_entry,"fx2 controller",
1470 hdw->hdw_desc->fx2_firmware.cnt,
1471 hdw->hdw_desc->fx2_firmware.lst);
1473 if (ret == -ENOENT) hdw->fw1_state = FW1_STATE_MISSING;
1477 usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
1479 pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
1480 fwsize = fw_entry->size;
1482 if ((fwsize != 0x2000) &&
1483 (!(hdw->hdw_desc->flag_fx2_16kb && (fwsize == 0x4000)))) {
1484 if (hdw->hdw_desc->flag_fx2_16kb) {
1485 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1486 "Wrong fx2 firmware size"
1487 " (expected 8192 or 16384, got %u)",
1490 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1491 "Wrong fx2 firmware size"
1492 " (expected 8192, got %u)",
1495 release_firmware(fw_entry);
1499 fw_ptr = kmalloc(0x800, GFP_KERNEL);
1500 if (fw_ptr == NULL){
1501 release_firmware(fw_entry);
1505 /* We have to hold the CPU during firmware upload. */
1506 pvr2_hdw_cpureset_assert(hdw,1);
1508 /* upload the firmware to address 0000-1fff in 2048 (=0x800) bytes
1512 for (address = 0; address < fwsize; address += 0x800) {
1513 memcpy(fw_ptr, fw_entry->data + address, 0x800);
1514 ret += usb_control_msg(hdw->usb_dev, pipe, 0xa0, 0x40, address,
1515 0, fw_ptr, 0x800, HZ);
1518 trace_firmware("Upload done, releasing device's CPU");
1520 /* Now release the CPU. It will disconnect and reconnect later. */
1521 pvr2_hdw_cpureset_assert(hdw,0);
1524 release_firmware(fw_entry);
1526 trace_firmware("Upload done (%d bytes sent)",ret);
1528 /* We should have written fwsize bytes */
1529 if (ret == fwsize) {
1530 hdw->fw1_state = FW1_STATE_RELOAD;
1539 * pvr2_upload_firmware2()
1541 * This uploads encoder firmware on endpoint 2.
1545 int pvr2_upload_firmware2(struct pvr2_hdw *hdw)
1547 const struct firmware *fw_entry = NULL;
1549 unsigned int pipe, fw_len, fw_done, bcnt, icnt;
1553 static const char *fw_files[] = {
1554 CX2341X_FIRM_ENC_FILENAME,
1557 if (hdw->hdw_desc->flag_skip_cx23416_firmware) {
1561 trace_firmware("pvr2_upload_firmware2");
1563 ret = pvr2_locate_firmware(hdw,&fw_entry,"encoder",
1564 ARRAY_SIZE(fw_files), fw_files);
1565 if (ret < 0) return ret;
1568 /* Since we're about to completely reinitialize the encoder,
1569 invalidate our cached copy of its configuration state. Next
1570 time we configure the encoder, then we'll fully configure it. */
1571 hdw->enc_cur_valid = 0;
1573 /* Encoder is about to be reset so note that as far as we're
1574 concerned now, the encoder has never been run. */
1575 del_timer_sync(&hdw->encoder_run_timer);
1576 if (hdw->state_encoder_runok) {
1577 hdw->state_encoder_runok = 0;
1578 trace_stbit("state_encoder_runok",hdw->state_encoder_runok);
1581 /* First prepare firmware loading */
1582 ret |= pvr2_write_register(hdw, 0x0048, 0xffffffff); /*interrupt mask*/
1583 ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000088); /*gpio dir*/
1584 ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/
1585 ret |= pvr2_hdw_cmd_deep_reset(hdw);
1586 ret |= pvr2_write_register(hdw, 0xa064, 0x00000000); /*APU command*/
1587 ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000408); /*gpio dir*/
1588 ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/
1589 ret |= pvr2_write_register(hdw, 0x9058, 0xffffffed); /*VPU ctrl*/
1590 ret |= pvr2_write_register(hdw, 0x9054, 0xfffffffd); /*reset hw blocks*/
1591 ret |= pvr2_write_register(hdw, 0x07f8, 0x80000800); /*encoder SDRAM refresh*/
1592 ret |= pvr2_write_register(hdw, 0x07fc, 0x0000001a); /*encoder SDRAM pre-charge*/
1593 ret |= pvr2_write_register(hdw, 0x0700, 0x00000000); /*I2C clock*/
1594 ret |= pvr2_write_register(hdw, 0xaa00, 0x00000000); /*unknown*/
1595 ret |= pvr2_write_register(hdw, 0xaa04, 0x00057810); /*unknown*/
1596 ret |= pvr2_write_register(hdw, 0xaa10, 0x00148500); /*unknown*/
1597 ret |= pvr2_write_register(hdw, 0xaa18, 0x00840000); /*unknown*/
1598 ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_FWPOST1);
1599 ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16));
1602 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1603 "firmware2 upload prep failed, ret=%d",ret);
1604 release_firmware(fw_entry);
1608 /* Now send firmware */
1610 fw_len = fw_entry->size;
1612 if (fw_len % sizeof(u32)) {
1613 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1614 "size of %s firmware"
1615 " must be a multiple of %zu bytes",
1616 fw_files[fwidx],sizeof(u32));
1617 release_firmware(fw_entry);
1622 fw_ptr = kmalloc(FIRMWARE_CHUNK_SIZE, GFP_KERNEL);
1623 if (fw_ptr == NULL){
1624 release_firmware(fw_entry);
1625 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1626 "failed to allocate memory for firmware2 upload");
1631 pipe = usb_sndbulkpipe(hdw->usb_dev, PVR2_FIRMWARE_ENDPOINT);
1634 for (fw_done = 0; fw_done < fw_len;) {
1635 bcnt = fw_len - fw_done;
1636 if (bcnt > FIRMWARE_CHUNK_SIZE) bcnt = FIRMWARE_CHUNK_SIZE;
1637 memcpy(fw_ptr, fw_entry->data + fw_done, bcnt);
1638 /* Usbsnoop log shows that we must swap bytes... */
1639 /* Some background info: The data being swapped here is a
1640 firmware image destined for the mpeg encoder chip that
1641 lives at the other end of a USB endpoint. The encoder
1642 chip always talks in 32 bit chunks and its storage is
1643 organized into 32 bit words. However from the file
1644 system to the encoder chip everything is purely a byte
1645 stream. The firmware file's contents are always 32 bit
1646 swapped from what the encoder expects. Thus the need
1647 always exists to swap the bytes regardless of the endian
1648 type of the host processor and therefore swab32() makes
1650 for (icnt = 0; icnt < bcnt/4 ; icnt++)
1651 ((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]);
1653 ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr,bcnt,
1654 &actual_length, HZ);
1655 ret |= (actual_length != bcnt);
1660 trace_firmware("upload of %s : %i / %i ",
1661 fw_files[fwidx],fw_done,fw_len);
1664 release_firmware(fw_entry);
1667 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1668 "firmware2 upload transfer failure");
1674 ret |= pvr2_write_register(hdw, 0x9054, 0xffffffff); /*reset hw blocks*/
1675 ret |= pvr2_write_register(hdw, 0x9058, 0xffffffe8); /*VPU ctrl*/
1676 ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16));
1679 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1680 "firmware2 upload post-proc failure");
1684 if (hdw->hdw_desc->signal_routing_scheme ==
1685 PVR2_ROUTING_SCHEME_GOTVIEW) {
1686 /* Ensure that GPIO 11 is set to output for GOTVIEW
1688 pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0);
1694 static const char *pvr2_get_state_name(unsigned int st)
1696 if (st < ARRAY_SIZE(pvr2_state_names)) {
1697 return pvr2_state_names[st];
1702 static int pvr2_decoder_enable(struct pvr2_hdw *hdw,int enablefl)
1704 /* Even though we really only care about the video decoder chip at
1705 this point, we'll broadcast stream on/off to all sub-devices
1706 anyway, just in case somebody else wants to hear the
1708 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 stream=%s",
1709 (enablefl ? "on" : "off"));
1710 v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_stream, enablefl);
1711 v4l2_device_call_all(&hdw->v4l2_dev, 0, audio, s_stream, enablefl);
1712 if (hdw->decoder_client_id) {
1713 /* We get here if the encoder has been noticed. Otherwise
1714 we'll issue a warning to the user (which should
1715 normally never happen). */
1718 if (!hdw->flag_decoder_missed) {
1719 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1720 "WARNING: No decoder present");
1721 hdw->flag_decoder_missed = !0;
1722 trace_stbit("flag_decoder_missed",
1723 hdw->flag_decoder_missed);
1729 int pvr2_hdw_get_state(struct pvr2_hdw *hdw)
1731 return hdw->master_state;
1735 static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *hdw)
1737 if (!hdw->flag_tripped) return 0;
1738 hdw->flag_tripped = 0;
1739 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1740 "Clearing driver error statuss");
1745 int pvr2_hdw_untrip(struct pvr2_hdw *hdw)
1748 LOCK_TAKE(hdw->big_lock); do {
1749 fl = pvr2_hdw_untrip_unlocked(hdw);
1750 } while (0); LOCK_GIVE(hdw->big_lock);
1751 if (fl) pvr2_hdw_state_sched(hdw);
1758 int pvr2_hdw_get_streaming(struct pvr2_hdw *hdw)
1760 return hdw->state_pipeline_req != 0;
1764 int pvr2_hdw_set_streaming(struct pvr2_hdw *hdw,int enable_flag)
1767 LOCK_TAKE(hdw->big_lock); do {
1768 pvr2_hdw_untrip_unlocked(hdw);
1769 if ((!enable_flag) != !(hdw->state_pipeline_req)) {
1770 hdw->state_pipeline_req = enable_flag != 0;
1771 pvr2_trace(PVR2_TRACE_START_STOP,
1772 "/*--TRACE_STREAM--*/ %s",
1773 enable_flag ? "enable" : "disable");
1775 pvr2_hdw_state_sched(hdw);
1776 } while (0); LOCK_GIVE(hdw->big_lock);
1777 if ((ret = pvr2_hdw_wait(hdw,0)) < 0) return ret;
1779 while ((st = hdw->master_state) != PVR2_STATE_RUN) {
1780 if (st != PVR2_STATE_READY) return -EIO;
1781 if ((ret = pvr2_hdw_wait(hdw,st)) < 0) return ret;
1788 int pvr2_hdw_set_stream_type(struct pvr2_hdw *hdw,enum pvr2_config config)
1791 LOCK_TAKE(hdw->big_lock);
1792 if ((fl = (hdw->desired_stream_type != config)) != 0) {
1793 hdw->desired_stream_type = config;
1794 hdw->state_pipeline_config = 0;
1795 trace_stbit("state_pipeline_config",
1796 hdw->state_pipeline_config);
1797 pvr2_hdw_state_sched(hdw);
1799 LOCK_GIVE(hdw->big_lock);
1801 return pvr2_hdw_wait(hdw,0);
1805 static int get_default_tuner_type(struct pvr2_hdw *hdw)
1807 int unit_number = hdw->unit_number;
1809 if ((unit_number >= 0) && (unit_number < PVR_NUM)) {
1810 tp = tuner[unit_number];
1812 if (tp < 0) return -EINVAL;
1813 hdw->tuner_type = tp;
1814 hdw->tuner_updated = !0;
1819 static v4l2_std_id get_default_standard(struct pvr2_hdw *hdw)
1821 int unit_number = hdw->unit_number;
1823 if ((unit_number >= 0) && (unit_number < PVR_NUM)) {
1824 tp = video_std[unit_number];
1831 static unsigned int get_default_error_tolerance(struct pvr2_hdw *hdw)
1833 int unit_number = hdw->unit_number;
1835 if ((unit_number >= 0) && (unit_number < PVR_NUM)) {
1836 tp = tolerance[unit_number];
1842 static int pvr2_hdw_check_firmware(struct pvr2_hdw *hdw)
1844 /* Try a harmless request to fetch the eeprom's address over
1845 endpoint 1. See what happens. Only the full FX2 image can
1846 respond to this. If this probe fails then likely the FX2
1847 firmware needs be loaded. */
1849 LOCK_TAKE(hdw->ctl_lock); do {
1850 hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR;
1851 result = pvr2_send_request_ex(hdw,HZ*1,!0,
1854 if (result < 0) break;
1855 } while(0); LOCK_GIVE(hdw->ctl_lock);
1857 pvr2_trace(PVR2_TRACE_INIT,
1858 "Probe of device endpoint 1 result status %d",
1861 pvr2_trace(PVR2_TRACE_INIT,
1862 "Probe of device endpoint 1 succeeded");
1867 struct pvr2_std_hack {
1868 v4l2_std_id pat; /* Pattern to match */
1869 v4l2_std_id msk; /* Which bits we care about */
1870 v4l2_std_id std; /* What additional standards or default to set */
1873 /* This data structure labels specific combinations of standards from
1874 tveeprom that we'll try to recognize. If we recognize one, then assume
1875 a specified default standard to use. This is here because tveeprom only
1876 tells us about available standards not the intended default standard (if
1877 any) for the device in question. We guess the default based on what has
1878 been reported as available. Note that this is only for guessing a
1879 default - which can always be overridden explicitly - and if the user
1880 has otherwise named a default then that default will always be used in
1881 place of this table. */
1882 static const struct pvr2_std_hack std_eeprom_maps[] = {
1884 .pat = V4L2_STD_B|V4L2_STD_GH,
1885 .std = V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_PAL_G,
1889 .std = V4L2_STD_NTSC_M,
1892 .pat = V4L2_STD_PAL_I,
1893 .std = V4L2_STD_PAL_I,
1896 .pat = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC,
1897 .std = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC,
1901 .std = V4L2_STD_PAL_D|V4L2_STD_PAL_D1|V4L2_STD_PAL_K,
1905 static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
1909 v4l2_std_id std1,std2,std3;
1911 std1 = get_default_standard(hdw);
1912 std3 = std1 ? 0 : hdw->hdw_desc->default_std_mask;
1914 bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom);
1915 pvr2_trace(PVR2_TRACE_STD,
1916 "Supported video standard(s) reported available"
1917 " in hardware: %.*s",
1920 hdw->std_mask_avail = hdw->std_mask_eeprom;
1922 std2 = (std1|std3) & ~hdw->std_mask_avail;
1924 bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2);
1925 pvr2_trace(PVR2_TRACE_STD,
1926 "Expanding supported video standards"
1927 " to include: %.*s",
1929 hdw->std_mask_avail |= std2;
1932 pvr2_hdw_internal_set_std_avail(hdw);
1935 bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std1);
1936 pvr2_trace(PVR2_TRACE_STD,
1937 "Initial video standard forced to %.*s",
1939 hdw->std_mask_cur = std1;
1940 hdw->std_dirty = !0;
1941 pvr2_hdw_internal_find_stdenum(hdw);
1945 bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std3);
1946 pvr2_trace(PVR2_TRACE_STD,
1947 "Initial video standard"
1948 " (determined by device type): %.*s",bcnt,buf);
1949 hdw->std_mask_cur = std3;
1950 hdw->std_dirty = !0;
1951 pvr2_hdw_internal_find_stdenum(hdw);
1957 for (idx = 0; idx < ARRAY_SIZE(std_eeprom_maps); idx++) {
1958 if (std_eeprom_maps[idx].msk ?
1959 ((std_eeprom_maps[idx].pat ^
1960 hdw->std_mask_eeprom) &
1961 std_eeprom_maps[idx].msk) :
1962 (std_eeprom_maps[idx].pat !=
1963 hdw->std_mask_eeprom)) continue;
1964 bcnt = pvr2_std_id_to_str(buf,sizeof(buf),
1965 std_eeprom_maps[idx].std);
1966 pvr2_trace(PVR2_TRACE_STD,
1967 "Initial video standard guessed as %.*s",
1969 hdw->std_mask_cur = std_eeprom_maps[idx].std;
1970 hdw->std_dirty = !0;
1971 pvr2_hdw_internal_find_stdenum(hdw);
1976 if (hdw->std_enum_cnt > 1) {
1977 // Autoselect the first listed standard
1978 hdw->std_enum_cur = 1;
1979 hdw->std_mask_cur = hdw->std_defs[hdw->std_enum_cur-1].id;
1980 hdw->std_dirty = !0;
1981 pvr2_trace(PVR2_TRACE_STD,
1982 "Initial video standard auto-selected to %s",
1983 hdw->std_defs[hdw->std_enum_cur-1].name);
1987 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1988 "Unable to select a viable initial video standard");
1992 static unsigned int pvr2_copy_i2c_addr_list(
1993 unsigned short *dst, const unsigned char *src,
1994 unsigned int dst_max)
1996 unsigned int cnt = 0;
1998 while (src[cnt] && (cnt + 1) < dst_max) {
1999 dst[cnt] = src[cnt];
2002 dst[cnt] = I2C_CLIENT_END;
2007 static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw)
2010 Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness
2011 for cx25840 causes that module to correctly set up its video
2012 scaling. This is really a problem in the cx25840 module itself,
2013 but we work around it here. The problem has not been seen in
2014 ivtv because there VBI is supported and set up. We don't do VBI
2015 here (at least not yet) and thus we never attempted to even set
2018 struct v4l2_format fmt;
2019 if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) {
2020 /* We're not using a cx25840 so don't enable the hack */
2024 pvr2_trace(PVR2_TRACE_INIT,
2026 " Executing cx25840 VBI hack",
2027 hdw->decoder_client_id);
2028 memset(&fmt, 0, sizeof(fmt));
2029 fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
2030 v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
2031 vbi, s_sliced_fmt, &fmt.fmt.sliced);
2035 static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
2036 const struct pvr2_device_client_desc *cd)
2040 struct v4l2_subdev *sd;
2041 unsigned int i2ccnt;
2042 const unsigned char *p;
2043 /* Arbitrary count - max # i2c addresses we will probe */
2044 unsigned short i2caddr[25];
2046 mid = cd->module_id;
2047 fname = (mid < ARRAY_SIZE(module_names)) ? module_names[mid] : NULL;
2049 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2050 "Module ID %u for device %s has no name?"
2051 " The driver might have a configuration problem.",
2053 hdw->hdw_desc->description);
2056 pvr2_trace(PVR2_TRACE_INIT,
2057 "Module ID %u (%s) for device %s being loaded...",
2059 hdw->hdw_desc->description);
2061 i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, cd->i2c_address_list,
2062 ARRAY_SIZE(i2caddr));
2063 if (!i2ccnt && ((p = (mid < ARRAY_SIZE(module_i2c_addresses)) ?
2064 module_i2c_addresses[mid] : NULL) != NULL)) {
2065 /* Second chance: Try default i2c address list */
2066 i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, p,
2067 ARRAY_SIZE(i2caddr));
2069 pvr2_trace(PVR2_TRACE_INIT,
2071 " Using default i2c address list",
2077 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2078 "Module ID %u (%s) for device %s:"
2079 " No i2c addresses."
2080 " The driver might have a configuration problem.",
2081 mid, fname, hdw->hdw_desc->description);
2086 pvr2_trace(PVR2_TRACE_INIT,
2088 " Setting up with specified i2c address 0x%x",
2090 sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
2091 fname, i2caddr[0], NULL);
2093 pvr2_trace(PVR2_TRACE_INIT,
2095 " Setting up with address probe list",
2097 sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
2102 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2103 "Module ID %u (%s) for device %s failed to load."
2104 " Possible missing sub-device kernel module or"
2105 " initialization failure within module.",
2106 mid, fname, hdw->hdw_desc->description);
2110 /* Tag this sub-device instance with the module ID we know about.
2111 In other places we'll use that tag to determine if the instance
2112 requires special handling. */
2115 pvr2_trace(PVR2_TRACE_INFO, "Attached sub-driver %s", fname);
2118 /* client-specific setup... */
2120 case PVR2_CLIENT_ID_CX25840:
2121 case PVR2_CLIENT_ID_SAA7115:
2122 hdw->decoder_client_id = mid;
2131 static void pvr2_hdw_load_modules(struct pvr2_hdw *hdw)
2134 const struct pvr2_string_table *cm;
2135 const struct pvr2_device_client_table *ct;
2138 cm = &hdw->hdw_desc->client_modules;
2139 for (idx = 0; idx < cm->cnt; idx++) {
2140 request_module(cm->lst[idx]);
2143 ct = &hdw->hdw_desc->client_table;
2144 for (idx = 0; idx < ct->cnt; idx++) {
2145 if (pvr2_hdw_load_subdev(hdw, &ct->lst[idx]) < 0) okFl = 0;
2148 hdw->flag_modulefail = !0;
2149 pvr2_hdw_render_useless(hdw);
2154 static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
2158 struct pvr2_ctrl *cptr;
2160 if (hdw->hdw_desc->fx2_firmware.cnt) {
2163 (hdw->usb_intf->cur_altsetting->desc.bNumEndpoints
2166 pvr2_trace(PVR2_TRACE_INIT,
2167 "USB endpoint config looks strange"
2168 "; possibly firmware needs to be"
2173 reloadFl = !pvr2_hdw_check_firmware(hdw);
2175 pvr2_trace(PVR2_TRACE_INIT,
2176 "Check for FX2 firmware failed"
2177 "; possibly firmware needs to be"
2182 if (pvr2_upload_firmware1(hdw) != 0) {
2183 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2184 "Failure uploading firmware1");
2189 hdw->fw1_state = FW1_STATE_OK;
2191 if (!pvr2_hdw_dev_ok(hdw)) return;
2193 hdw->force_dirty = !0;
2195 if (!hdw->hdw_desc->flag_no_powerup) {
2196 pvr2_hdw_cmd_powerup(hdw);
2197 if (!pvr2_hdw_dev_ok(hdw)) return;
2200 /* Take the IR chip out of reset, if appropriate */
2201 if (hdw->ir_scheme_active == PVR2_IR_SCHEME_ZILOG) {
2202 pvr2_issue_simple_cmd(hdw,
2203 FX2CMD_HCW_ZILOG_RESET |
2208 // This step MUST happen after the earlier powerup step.
2209 pvr2_i2c_core_init(hdw);
2210 if (!pvr2_hdw_dev_ok(hdw)) return;
2212 pvr2_hdw_load_modules(hdw);
2213 if (!pvr2_hdw_dev_ok(hdw)) return;
2215 v4l2_device_call_all(&hdw->v4l2_dev, 0, core, load_fw);
2217 for (idx = 0; idx < CTRLDEF_COUNT; idx++) {
2218 cptr = hdw->controls + idx;
2219 if (cptr->info->skip_init) continue;
2220 if (!cptr->info->set_value) continue;
2221 cptr->info->set_value(cptr,~0,cptr->info->default_value);
2224 pvr2_hdw_cx25840_vbi_hack(hdw);
2226 /* Set up special default values for the television and radio
2227 frequencies here. It's not really important what these defaults
2228 are, but I set them to something usable in the Chicago area just
2229 to make driver testing a little easier. */
2231 hdw->freqValTelevision = default_tv_freq;
2232 hdw->freqValRadio = default_radio_freq;
2234 // Do not use pvr2_reset_ctl_endpoints() here. It is not
2235 // thread-safe against the normal pvr2_send_request() mechanism.
2236 // (We should make it thread safe).
2238 if (hdw->hdw_desc->flag_has_hauppauge_rom) {
2239 ret = pvr2_hdw_get_eeprom_addr(hdw);
2240 if (!pvr2_hdw_dev_ok(hdw)) return;
2242 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2243 "Unable to determine location of eeprom,"
2246 hdw->eeprom_addr = ret;
2247 pvr2_eeprom_analyze(hdw);
2248 if (!pvr2_hdw_dev_ok(hdw)) return;
2251 hdw->tuner_type = hdw->hdw_desc->default_tuner_type;
2252 hdw->tuner_updated = !0;
2253 hdw->std_mask_eeprom = V4L2_STD_ALL;
2256 if (hdw->serial_number) {
2257 idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1,
2258 "sn-%lu", hdw->serial_number);
2259 } else if (hdw->unit_number >= 0) {
2260 idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1,
2262 hdw->unit_number + 'a');
2264 idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1,
2267 hdw->identifier[idx] = 0;
2269 pvr2_hdw_setup_std(hdw);
2271 if (!get_default_tuner_type(hdw)) {
2272 pvr2_trace(PVR2_TRACE_INIT,
2273 "pvr2_hdw_setup: Tuner type overridden to %d",
2278 if (!pvr2_hdw_dev_ok(hdw)) return;
2280 if (hdw->hdw_desc->signal_routing_scheme ==
2281 PVR2_ROUTING_SCHEME_GOTVIEW) {
2282 /* Ensure that GPIO 11 is set to output for GOTVIEW
2284 pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0);
2287 pvr2_hdw_commit_setup(hdw);
2289 hdw->vid_stream = pvr2_stream_create();
2290 if (!pvr2_hdw_dev_ok(hdw)) return;
2291 pvr2_trace(PVR2_TRACE_INIT,
2292 "pvr2_hdw_setup: video stream is %p",hdw->vid_stream);
2293 if (hdw->vid_stream) {
2294 idx = get_default_error_tolerance(hdw);
2296 pvr2_trace(PVR2_TRACE_INIT,
2297 "pvr2_hdw_setup: video stream %p"
2298 " setting tolerance %u",
2299 hdw->vid_stream,idx);
2301 pvr2_stream_setup(hdw->vid_stream,hdw->usb_dev,
2302 PVR2_VID_ENDPOINT,idx);
2305 if (!pvr2_hdw_dev_ok(hdw)) return;
2307 hdw->flag_init_ok = !0;
2309 pvr2_hdw_state_sched(hdw);
2313 /* Set up the structure and attempt to put the device into a usable state.
2314 This can be a time-consuming operation, which is why it is not done
2315 internally as part of the create() step. */
2316 static void pvr2_hdw_setup(struct pvr2_hdw *hdw)
2318 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) begin",hdw);
2320 pvr2_hdw_setup_low(hdw);
2321 pvr2_trace(PVR2_TRACE_INIT,
2322 "pvr2_hdw_setup(hdw=%p) done, ok=%d init_ok=%d",
2323 hdw,pvr2_hdw_dev_ok(hdw),hdw->flag_init_ok);
2324 if (pvr2_hdw_dev_ok(hdw)) {
2325 if (hdw->flag_init_ok) {
2328 "Device initialization"
2329 " completed successfully.");
2332 if (hdw->fw1_state == FW1_STATE_RELOAD) {
2335 "Device microcontroller firmware"
2336 " (re)loaded; it should now reset"
2341 PVR2_TRACE_ERROR_LEGS,
2342 "Device initialization was not successful.");
2343 if (hdw->fw1_state == FW1_STATE_MISSING) {
2345 PVR2_TRACE_ERROR_LEGS,
2346 "Giving up since device"
2347 " microcontroller firmware"
2348 " appears to be missing.");
2352 if (hdw->flag_modulefail) {
2354 PVR2_TRACE_ERROR_LEGS,
2355 "***WARNING*** pvrusb2 driver initialization"
2356 " failed due to the failure of one or more"
2357 " sub-device kernel modules.");
2359 PVR2_TRACE_ERROR_LEGS,
2360 "You need to resolve the failing condition"
2361 " before this driver can function. There"
2362 " should be some earlier messages giving more"
2363 " information about the problem.");
2368 PVR2_TRACE_ERROR_LEGS,
2369 "Attempting pvrusb2 recovery by reloading"
2370 " primary firmware.");
2372 PVR2_TRACE_ERROR_LEGS,
2373 "If this works, device should disconnect"
2374 " and reconnect in a sane state.");
2375 hdw->fw1_state = FW1_STATE_UNKNOWN;
2376 pvr2_upload_firmware1(hdw);
2379 PVR2_TRACE_ERROR_LEGS,
2380 "***WARNING*** pvrusb2 device hardware"
2381 " appears to be jammed"
2382 " and I can't clear it.");
2384 PVR2_TRACE_ERROR_LEGS,
2385 "You might need to power cycle"
2386 " the pvrusb2 device"
2387 " in order to recover.");
2390 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) end",hdw);
2394 /* Perform second stage initialization. Set callback pointer first so that
2395 we can avoid a possible initialization race (if the kernel thread runs
2396 before the callback has been set). */
2397 int pvr2_hdw_initialize(struct pvr2_hdw *hdw,
2398 void (*callback_func)(void *),
2399 void *callback_data)
2401 LOCK_TAKE(hdw->big_lock); do {
2402 if (hdw->flag_disconnected) {
2403 /* Handle a race here: If we're already
2404 disconnected by this point, then give up. If we
2405 get past this then we'll remain connected for
2406 the duration of initialization since the entire
2407 initialization sequence is now protected by the
2411 hdw->state_data = callback_data;
2412 hdw->state_func = callback_func;
2413 pvr2_hdw_setup(hdw);
2414 } while (0); LOCK_GIVE(hdw->big_lock);
2415 return hdw->flag_init_ok;
2419 /* Create, set up, and return a structure for interacting with the
2420 underlying hardware. */
2421 struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
2422 const struct usb_device_id *devid)
2424 unsigned int idx,cnt1,cnt2,m;
2425 struct pvr2_hdw *hdw = NULL;
2427 struct pvr2_ctrl *cptr;
2428 struct usb_device *usb_dev;
2429 const struct pvr2_device_desc *hdw_desc;
2431 struct v4l2_queryctrl qctrl;
2432 struct pvr2_ctl_info *ciptr;
2434 usb_dev = interface_to_usbdev(intf);
2436 hdw_desc = (const struct pvr2_device_desc *)(devid->driver_info);
2438 if (hdw_desc == NULL) {
2439 pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create:"
2440 " No device description pointer,"
2441 " unable to continue.");
2442 pvr2_trace(PVR2_TRACE_INIT, "If you have a new device type,"
2443 " please contact Mike Isely <isely@pobox.com>"
2444 " to get it included in the driver\n");
2448 hdw = kzalloc(sizeof(*hdw),GFP_KERNEL);
2449 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"",
2450 hdw,hdw_desc->description);
2451 pvr2_trace(PVR2_TRACE_INFO, "Hardware description: %s",
2452 hdw_desc->description);
2453 if (hdw_desc->flag_is_experimental) {
2454 pvr2_trace(PVR2_TRACE_INFO, "**********");
2455 pvr2_trace(PVR2_TRACE_INFO,
2456 "WARNING: Support for this device (%s) is"
2457 " experimental.", hdw_desc->description);
2458 pvr2_trace(PVR2_TRACE_INFO,
2459 "Important functionality might not be"
2460 " entirely working.");
2461 pvr2_trace(PVR2_TRACE_INFO,
2462 "Please consider contacting the driver author to"
2463 " help with further stabilization of the driver.");
2464 pvr2_trace(PVR2_TRACE_INFO, "**********");
2466 if (!hdw) goto fail;
2468 init_timer(&hdw->quiescent_timer);
2469 hdw->quiescent_timer.data = (unsigned long)hdw;
2470 hdw->quiescent_timer.function = pvr2_hdw_quiescent_timeout;
2472 init_timer(&hdw->decoder_stabilization_timer);
2473 hdw->decoder_stabilization_timer.data = (unsigned long)hdw;
2474 hdw->decoder_stabilization_timer.function =
2475 pvr2_hdw_decoder_stabilization_timeout;
2477 init_timer(&hdw->encoder_wait_timer);
2478 hdw->encoder_wait_timer.data = (unsigned long)hdw;
2479 hdw->encoder_wait_timer.function = pvr2_hdw_encoder_wait_timeout;
2481 init_timer(&hdw->encoder_run_timer);
2482 hdw->encoder_run_timer.data = (unsigned long)hdw;
2483 hdw->encoder_run_timer.function = pvr2_hdw_encoder_run_timeout;
2485 hdw->master_state = PVR2_STATE_DEAD;
2487 init_waitqueue_head(&hdw->state_wait_data);
2489 hdw->tuner_signal_stale = !0;
2490 cx2341x_fill_defaults(&hdw->enc_ctl_state);
2492 /* Calculate which inputs are OK */
2494 if (hdw_desc->flag_has_analogtuner) m |= 1 << PVR2_CVAL_INPUT_TV;
2495 if (hdw_desc->digital_control_scheme != PVR2_DIGITAL_SCHEME_NONE) {
2496 m |= 1 << PVR2_CVAL_INPUT_DTV;
2498 if (hdw_desc->flag_has_svideo) m |= 1 << PVR2_CVAL_INPUT_SVIDEO;
2499 if (hdw_desc->flag_has_composite) m |= 1 << PVR2_CVAL_INPUT_COMPOSITE;
2500 if (hdw_desc->flag_has_fmradio) m |= 1 << PVR2_CVAL_INPUT_RADIO;
2501 hdw->input_avail_mask = m;
2502 hdw->input_allowed_mask = hdw->input_avail_mask;
2504 /* If not a hybrid device, pathway_state never changes. So
2505 initialize it here to what it should forever be. */
2506 if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_DTV))) {
2507 hdw->pathway_state = PVR2_PATHWAY_ANALOG;
2508 } else if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_TV))) {
2509 hdw->pathway_state = PVR2_PATHWAY_DIGITAL;
2512 hdw->control_cnt = CTRLDEF_COUNT;
2513 hdw->control_cnt += MPEGDEF_COUNT;
2514 hdw->controls = kzalloc(sizeof(struct pvr2_ctrl) * hdw->control_cnt,
2516 if (!hdw->controls) goto fail;
2517 hdw->hdw_desc = hdw_desc;
2518 hdw->ir_scheme_active = hdw->hdw_desc->ir_scheme;
2519 for (idx = 0; idx < hdw->control_cnt; idx++) {
2520 cptr = hdw->controls + idx;
2523 for (idx = 0; idx < 32; idx++) {
2524 hdw->std_mask_ptrs[idx] = hdw->std_mask_names[idx];
2526 for (idx = 0; idx < CTRLDEF_COUNT; idx++) {
2527 cptr = hdw->controls + idx;
2528 cptr->info = control_defs+idx;
2531 /* Ensure that default input choice is a valid one. */
2532 m = hdw->input_avail_mask;
2533 if (m) for (idx = 0; idx < (sizeof(m) << 3); idx++) {
2534 if (!((1 << idx) & m)) continue;
2535 hdw->input_val = idx;
2539 /* Define and configure additional controls from cx2341x module. */
2540 hdw->mpeg_ctrl_info = kzalloc(
2541 sizeof(*(hdw->mpeg_ctrl_info)) * MPEGDEF_COUNT, GFP_KERNEL);
2542 if (!hdw->mpeg_ctrl_info) goto fail;
2543 for (idx = 0; idx < MPEGDEF_COUNT; idx++) {
2544 cptr = hdw->controls + idx + CTRLDEF_COUNT;
2545 ciptr = &(hdw->mpeg_ctrl_info[idx].info);
2546 ciptr->desc = hdw->mpeg_ctrl_info[idx].desc;
2547 ciptr->name = mpeg_ids[idx].strid;
2548 ciptr->v4l_id = mpeg_ids[idx].id;
2549 ciptr->skip_init = !0;
2550 ciptr->get_value = ctrl_cx2341x_get;
2551 ciptr->get_v4lflags = ctrl_cx2341x_getv4lflags;
2552 ciptr->is_dirty = ctrl_cx2341x_is_dirty;
2553 if (!idx) ciptr->clear_dirty = ctrl_cx2341x_clear_dirty;
2554 qctrl.id = ciptr->v4l_id;
2555 cx2341x_ctrl_query(&hdw->enc_ctl_state,&qctrl);
2556 if (!(qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY)) {
2557 ciptr->set_value = ctrl_cx2341x_set;
2559 strncpy(hdw->mpeg_ctrl_info[idx].desc,qctrl.name,
2560 PVR2_CTLD_INFO_DESC_SIZE);
2561 hdw->mpeg_ctrl_info[idx].desc[PVR2_CTLD_INFO_DESC_SIZE-1] = 0;
2562 ciptr->default_value = qctrl.default_value;
2563 switch (qctrl.type) {
2565 case V4L2_CTRL_TYPE_INTEGER:
2566 ciptr->type = pvr2_ctl_int;
2567 ciptr->def.type_int.min_value = qctrl.minimum;
2568 ciptr->def.type_int.max_value = qctrl.maximum;
2570 case V4L2_CTRL_TYPE_BOOLEAN:
2571 ciptr->type = pvr2_ctl_bool;
2573 case V4L2_CTRL_TYPE_MENU:
2574 ciptr->type = pvr2_ctl_enum;
2575 ciptr->def.type_enum.value_names =
2576 cx2341x_ctrl_get_menu(&hdw->enc_ctl_state,
2579 ciptr->def.type_enum.value_names[cnt1] != NULL;
2581 ciptr->def.type_enum.count = cnt1;
2587 // Initialize video standard enum dynamic control
2588 cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDENUM);
2590 memcpy(&hdw->std_info_enum,cptr->info,
2591 sizeof(hdw->std_info_enum));
2592 cptr->info = &hdw->std_info_enum;
2595 // Initialize control data regarding video standard masks
2596 valid_std_mask = pvr2_std_get_usable();
2597 for (idx = 0; idx < 32; idx++) {
2598 if (!(valid_std_mask & (1 << idx))) continue;
2599 cnt1 = pvr2_std_id_to_str(
2600 hdw->std_mask_names[idx],
2601 sizeof(hdw->std_mask_names[idx])-1,
2603 hdw->std_mask_names[idx][cnt1] = 0;
2605 cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDAVAIL);
2607 memcpy(&hdw->std_info_avail,cptr->info,
2608 sizeof(hdw->std_info_avail));
2609 cptr->info = &hdw->std_info_avail;
2610 hdw->std_info_avail.def.type_bitmask.bit_names =
2612 hdw->std_info_avail.def.type_bitmask.valid_bits =
2615 cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDCUR);
2617 memcpy(&hdw->std_info_cur,cptr->info,
2618 sizeof(hdw->std_info_cur));
2619 cptr->info = &hdw->std_info_cur;
2620 hdw->std_info_cur.def.type_bitmask.bit_names =
2622 hdw->std_info_avail.def.type_bitmask.valid_bits =
2626 hdw->cropcap_stale = !0;
2627 hdw->eeprom_addr = -1;
2628 hdw->unit_number = -1;
2629 hdw->v4l_minor_number_video = -1;
2630 hdw->v4l_minor_number_vbi = -1;
2631 hdw->v4l_minor_number_radio = -1;
2632 hdw->ctl_write_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL);
2633 if (!hdw->ctl_write_buffer) goto fail;
2634 hdw->ctl_read_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL);
2635 if (!hdw->ctl_read_buffer) goto fail;
2636 hdw->ctl_write_urb = usb_alloc_urb(0,GFP_KERNEL);
2637 if (!hdw->ctl_write_urb) goto fail;
2638 hdw->ctl_read_urb = usb_alloc_urb(0,GFP_KERNEL);
2639 if (!hdw->ctl_read_urb) goto fail;
2641 if (v4l2_device_register(&intf->dev, &hdw->v4l2_dev) != 0) {
2642 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2643 "Error registering with v4l core, giving up");
2646 mutex_lock(&pvr2_unit_mtx); do {
2647 for (idx = 0; idx < PVR_NUM; idx++) {
2648 if (unit_pointers[idx]) continue;
2649 hdw->unit_number = idx;
2650 unit_pointers[idx] = hdw;
2653 } while (0); mutex_unlock(&pvr2_unit_mtx);
2656 cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"pvrusb2");
2658 if (hdw->unit_number >= 0) {
2659 cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"_%c",
2660 ('a' + hdw->unit_number));
2663 if (cnt1 >= sizeof(hdw->name)) cnt1 = sizeof(hdw->name)-1;
2664 hdw->name[cnt1] = 0;
2666 hdw->workqueue = create_singlethread_workqueue(hdw->name);
2667 INIT_WORK(&hdw->workpoll,pvr2_hdw_worker_poll);
2669 pvr2_trace(PVR2_TRACE_INIT,"Driver unit number is %d, name is %s",
2670 hdw->unit_number,hdw->name);
2672 hdw->tuner_type = -1;
2675 hdw->usb_intf = intf;
2676 hdw->usb_dev = usb_dev;
2678 usb_make_path(hdw->usb_dev, hdw->bus_info, sizeof(hdw->bus_info));
2680 ifnum = hdw->usb_intf->cur_altsetting->desc.bInterfaceNumber;
2681 usb_set_interface(hdw->usb_dev,ifnum,0);
2683 mutex_init(&hdw->ctl_lock_mutex);
2684 mutex_init(&hdw->big_lock_mutex);
2689 del_timer_sync(&hdw->quiescent_timer);
2690 del_timer_sync(&hdw->decoder_stabilization_timer);
2691 del_timer_sync(&hdw->encoder_run_timer);
2692 del_timer_sync(&hdw->encoder_wait_timer);
2693 if (hdw->workqueue) {
2694 flush_workqueue(hdw->workqueue);
2695 destroy_workqueue(hdw->workqueue);
2696 hdw->workqueue = NULL;
2698 usb_free_urb(hdw->ctl_read_urb);
2699 usb_free_urb(hdw->ctl_write_urb);
2700 kfree(hdw->ctl_read_buffer);
2701 kfree(hdw->ctl_write_buffer);
2702 kfree(hdw->controls);
2703 kfree(hdw->mpeg_ctrl_info);
2704 kfree(hdw->std_defs);
2705 kfree(hdw->std_enum_names);
2712 /* Remove _all_ associations between this driver and the underlying USB
2714 static void pvr2_hdw_remove_usb_stuff(struct pvr2_hdw *hdw)
2716 if (hdw->flag_disconnected) return;
2717 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_remove_usb_stuff: hdw=%p",hdw);
2718 if (hdw->ctl_read_urb) {
2719 usb_kill_urb(hdw->ctl_read_urb);
2720 usb_free_urb(hdw->ctl_read_urb);
2721 hdw->ctl_read_urb = NULL;
2723 if (hdw->ctl_write_urb) {
2724 usb_kill_urb(hdw->ctl_write_urb);
2725 usb_free_urb(hdw->ctl_write_urb);
2726 hdw->ctl_write_urb = NULL;
2728 if (hdw->ctl_read_buffer) {
2729 kfree(hdw->ctl_read_buffer);
2730 hdw->ctl_read_buffer = NULL;
2732 if (hdw->ctl_write_buffer) {
2733 kfree(hdw->ctl_write_buffer);
2734 hdw->ctl_write_buffer = NULL;
2736 hdw->flag_disconnected = !0;
2737 /* If we don't do this, then there will be a dangling struct device
2738 reference to our disappearing device persisting inside the V4L
2740 v4l2_device_disconnect(&hdw->v4l2_dev);
2741 hdw->usb_dev = NULL;
2742 hdw->usb_intf = NULL;
2743 pvr2_hdw_render_useless(hdw);
2747 /* Destroy hardware interaction structure */
2748 void pvr2_hdw_destroy(struct pvr2_hdw *hdw)
2751 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_destroy: hdw=%p",hdw);
2752 if (hdw->workqueue) {
2753 flush_workqueue(hdw->workqueue);
2754 destroy_workqueue(hdw->workqueue);
2755 hdw->workqueue = NULL;
2757 del_timer_sync(&hdw->quiescent_timer);
2758 del_timer_sync(&hdw->decoder_stabilization_timer);
2759 del_timer_sync(&hdw->encoder_run_timer);
2760 del_timer_sync(&hdw->encoder_wait_timer);
2761 if (hdw->fw_buffer) {
2762 kfree(hdw->fw_buffer);
2763 hdw->fw_buffer = NULL;
2765 if (hdw->vid_stream) {
2766 pvr2_stream_destroy(hdw->vid_stream);
2767 hdw->vid_stream = NULL;
2769 pvr2_i2c_core_done(hdw);
2770 v4l2_device_unregister(&hdw->v4l2_dev);
2771 pvr2_hdw_remove_usb_stuff(hdw);
2772 mutex_lock(&pvr2_unit_mtx); do {
2773 if ((hdw->unit_number >= 0) &&
2774 (hdw->unit_number < PVR_NUM) &&
2775 (unit_pointers[hdw->unit_number] == hdw)) {
2776 unit_pointers[hdw->unit_number] = NULL;
2778 } while (0); mutex_unlock(&pvr2_unit_mtx);
2779 kfree(hdw->controls);
2780 kfree(hdw->mpeg_ctrl_info);
2781 kfree(hdw->std_defs);
2782 kfree(hdw->std_enum_names);
2787 int pvr2_hdw_dev_ok(struct pvr2_hdw *hdw)
2789 return (hdw && hdw->flag_ok);
2793 /* Called when hardware has been unplugged */
2794 void pvr2_hdw_disconnect(struct pvr2_hdw *hdw)
2796 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw);
2797 LOCK_TAKE(hdw->big_lock);
2798 LOCK_TAKE(hdw->ctl_lock);
2799 pvr2_hdw_remove_usb_stuff(hdw);
2800 LOCK_GIVE(hdw->ctl_lock);
2801 LOCK_GIVE(hdw->big_lock);
2805 // Attempt to autoselect an appropriate value for std_enum_cur given
2806 // whatever is currently in std_mask_cur
2807 static void pvr2_hdw_internal_find_stdenum(struct pvr2_hdw *hdw)
2810 for (idx = 1; idx < hdw->std_enum_cnt; idx++) {
2811 if (hdw->std_defs[idx-1].id == hdw->std_mask_cur) {
2812 hdw->std_enum_cur = idx;
2816 hdw->std_enum_cur = 0;
2820 // Calculate correct set of enumerated standards based on currently known
2821 // set of available standards bits.
2822 static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw)
2824 struct v4l2_standard *newstd;
2825 unsigned int std_cnt;
2828 newstd = pvr2_std_create_enum(&std_cnt,hdw->std_mask_avail);
2830 if (hdw->std_defs) {
2831 kfree(hdw->std_defs);
2832 hdw->std_defs = NULL;
2834 hdw->std_enum_cnt = 0;
2835 if (hdw->std_enum_names) {
2836 kfree(hdw->std_enum_names);
2837 hdw->std_enum_names = NULL;
2842 PVR2_TRACE_ERROR_LEGS,
2843 "WARNING: Failed to identify any viable standards");
2845 hdw->std_enum_names = kmalloc(sizeof(char *)*(std_cnt+1),GFP_KERNEL);
2846 hdw->std_enum_names[0] = "none";
2847 for (idx = 0; idx < std_cnt; idx++) {
2848 hdw->std_enum_names[idx+1] =
2851 // Set up the dynamic control for this standard
2852 hdw->std_info_enum.def.type_enum.value_names = hdw->std_enum_names;
2853 hdw->std_info_enum.def.type_enum.count = std_cnt+1;
2854 hdw->std_defs = newstd;
2855 hdw->std_enum_cnt = std_cnt+1;
2856 hdw->std_enum_cur = 0;
2857 hdw->std_info_cur.def.type_bitmask.valid_bits = hdw->std_mask_avail;
2861 int pvr2_hdw_get_stdenum_value(struct pvr2_hdw *hdw,
2862 struct v4l2_standard *std,
2866 if (!idx) return ret;
2867 LOCK_TAKE(hdw->big_lock); do {
2868 if (idx >= hdw->std_enum_cnt) break;
2870 memcpy(std,hdw->std_defs+idx,sizeof(*std));
2872 } while (0); LOCK_GIVE(hdw->big_lock);
2877 /* Get the number of defined controls */
2878 unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *hdw)
2880 return hdw->control_cnt;
2884 /* Retrieve a control handle given its index (0..count-1) */
2885 struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_index(struct pvr2_hdw *hdw,
2888 if (idx >= hdw->control_cnt) return NULL;
2889 return hdw->controls + idx;
2893 /* Retrieve a control handle given its index (0..count-1) */
2894 struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_id(struct pvr2_hdw *hdw,
2895 unsigned int ctl_id)
2897 struct pvr2_ctrl *cptr;
2901 /* This could be made a lot more efficient, but for now... */
2902 for (idx = 0; idx < hdw->control_cnt; idx++) {
2903 cptr = hdw->controls + idx;
2904 i = cptr->info->internal_id;
2905 if (i && (i == ctl_id)) return cptr;
2911 /* Given a V4L ID, retrieve the control structure associated with it. */
2912 struct pvr2_ctrl *pvr2_hdw_get_ctrl_v4l(struct pvr2_hdw *hdw,unsigned int ctl_id)
2914 struct pvr2_ctrl *cptr;
2918 /* This could be made a lot more efficient, but for now... */
2919 for (idx = 0; idx < hdw->control_cnt; idx++) {
2920 cptr = hdw->controls + idx;
2921 i = cptr->info->v4l_id;
2922 if (i && (i == ctl_id)) return cptr;
2928 /* Given a V4L ID for its immediate predecessor, retrieve the control
2929 structure associated with it. */
2930 struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *hdw,
2931 unsigned int ctl_id)
2933 struct pvr2_ctrl *cptr,*cp2;
2937 /* This could be made a lot more efficient, but for now... */
2939 for (idx = 0; idx < hdw->control_cnt; idx++) {
2940 cptr = hdw->controls + idx;
2941 i = cptr->info->v4l_id;
2943 if (i <= ctl_id) continue;
2944 if (cp2 && (cp2->info->v4l_id < i)) continue;
2952 static const char *get_ctrl_typename(enum pvr2_ctl_type tp)
2955 case pvr2_ctl_int: return "integer";
2956 case pvr2_ctl_enum: return "enum";
2957 case pvr2_ctl_bool: return "boolean";
2958 case pvr2_ctl_bitmask: return "bitmask";
2964 static void pvr2_subdev_set_control(struct pvr2_hdw *hdw, int id,
2965 const char *name, int val)
2967 struct v4l2_control ctrl;
2968 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 %s=%d", name, val);
2969 memset(&ctrl, 0, sizeof(ctrl));
2972 v4l2_device_call_all(&hdw->v4l2_dev, 0, core, s_ctrl, &ctrl);
2975 #define PVR2_SUBDEV_SET_CONTROL(hdw, id, lab) \
2976 if ((hdw)->lab##_dirty || (hdw)->force_dirty) { \
2977 pvr2_subdev_set_control(hdw, id, #lab, (hdw)->lab##_val); \
2980 /* Execute whatever commands are required to update the state of all the
2981 sub-devices so that they match our current control values. */
2982 static void pvr2_subdev_update(struct pvr2_hdw *hdw)
2984 struct v4l2_subdev *sd;
2986 pvr2_subdev_update_func fp;
2988 pvr2_trace(PVR2_TRACE_CHIPS, "subdev update...");
2990 if (hdw->tuner_updated || hdw->force_dirty) {
2991 struct tuner_setup setup;
2992 pvr2_trace(PVR2_TRACE_CHIPS, "subdev tuner set_type(%d)",
2994 if (((int)(hdw->tuner_type)) >= 0) {
2995 memset(&setup, 0, sizeof(setup));
2996 setup.addr = ADDR_UNSET;
2997 setup.type = hdw->tuner_type;
2998 setup.mode_mask = T_RADIO | T_ANALOG_TV;
2999 v4l2_device_call_all(&hdw->v4l2_dev, 0,
3000 tuner, s_type_addr, &setup);
3004 if (hdw->input_dirty || hdw->std_dirty || hdw->force_dirty) {
3005 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_standard");
3006 if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
3007 v4l2_device_call_all(&hdw->v4l2_dev, 0,
3011 vs = hdw->std_mask_cur;
3012 v4l2_device_call_all(&hdw->v4l2_dev, 0,
3014 pvr2_hdw_cx25840_vbi_hack(hdw);
3016 hdw->tuner_signal_stale = !0;
3017 hdw->cropcap_stale = !0;
3020 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_BRIGHTNESS, brightness);
3021 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_CONTRAST, contrast);
3022 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_SATURATION, saturation);
3023 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_HUE, hue);
3024 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_MUTE, mute);
3025 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_VOLUME, volume);
3026 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BALANCE, balance);
3027 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BASS, bass);
3028 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_TREBLE, treble);
3030 if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) {
3031 struct v4l2_tuner vt;
3032 memset(&vt, 0, sizeof(vt));
3033 vt.audmode = hdw->audiomode_val;
3034 v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt);
3037 if (hdw->freqDirty || hdw->force_dirty) {
3039 struct v4l2_frequency freq;
3040 fv = pvr2_hdw_get_cur_freq(hdw);
3041 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_freq(%lu)", fv);
3042 if (hdw->tuner_signal_stale) pvr2_hdw_status_poll(hdw);
3043 memset(&freq, 0, sizeof(freq));
3044 if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) {
3045 /* ((fv * 1000) / 62500) */
3046 freq.frequency = (fv * 2) / 125;
3048 freq.frequency = fv / 62500;
3050 /* tuner-core currently doesn't seem to care about this, but
3051 let's set it anyway for completeness. */
3052 if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
3053 freq.type = V4L2_TUNER_RADIO;
3055 freq.type = V4L2_TUNER_ANALOG_TV;
3058 v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner,
3059 s_frequency, &freq);
3062 if (hdw->res_hor_dirty || hdw->res_ver_dirty || hdw->force_dirty) {
3063 struct v4l2_mbus_framefmt fmt;
3064 memset(&fmt, 0, sizeof(fmt));
3065 fmt.width = hdw->res_hor_val;
3066 fmt.height = hdw->res_ver_val;
3067 fmt.code = V4L2_MBUS_FMT_FIXED;
3068 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_size(%dx%d)",
3069 fmt.width, fmt.height);
3070 v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_mbus_fmt, &fmt);
3073 if (hdw->srate_dirty || hdw->force_dirty) {
3075 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_audio %d",
3077 switch (hdw->srate_val) {
3079 case V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000:
3082 case V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100:
3085 case V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000:
3089 v4l2_device_call_all(&hdw->v4l2_dev, 0,
3090 audio, s_clock_freq, val);
3093 /* Unable to set crop parameters; there is apparently no equivalent
3094 for VIDIOC_S_CROP */
3096 v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) {
3098 if (id >= ARRAY_SIZE(pvr2_module_update_functions)) continue;
3099 fp = pvr2_module_update_functions[id];
3104 if (hdw->tuner_signal_stale || hdw->cropcap_stale) {
3105 pvr2_hdw_status_poll(hdw);
3110 /* Figure out if we need to commit control changes. If so, mark internal
3111 state flags to indicate this fact and return true. Otherwise do nothing
3112 else and return false. */
3113 static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw)
3116 struct pvr2_ctrl *cptr;
3118 int commit_flag = hdw->force_dirty;
3120 unsigned int bcnt,ccnt;
3122 for (idx = 0; idx < hdw->control_cnt; idx++) {
3123 cptr = hdw->controls + idx;
3124 if (!cptr->info->is_dirty) continue;
3125 if (!cptr->info->is_dirty(cptr)) continue;
3128 if (!(pvrusb2_debug & PVR2_TRACE_CTL)) continue;
3129 bcnt = scnprintf(buf,sizeof(buf),"\"%s\" <-- ",
3132 cptr->info->get_value(cptr,&value);
3133 pvr2_ctrl_value_to_sym_internal(cptr,~0,value,
3135 sizeof(buf)-bcnt,&ccnt);
3137 bcnt += scnprintf(buf+bcnt,sizeof(buf)-bcnt," <%s>",
3138 get_ctrl_typename(cptr->info->type));
3139 pvr2_trace(PVR2_TRACE_CTL,
3140 "/*--TRACE_COMMIT--*/ %.*s",
3145 /* Nothing has changed */
3149 hdw->state_pipeline_config = 0;
3150 trace_stbit("state_pipeline_config",hdw->state_pipeline_config);
3151 pvr2_hdw_state_sched(hdw);
3157 /* Perform all operations needed to commit all control changes. This must
3158 be performed in synchronization with the pipeline state and is thus
3159 expected to be called as part of the driver's worker thread. Return
3160 true if commit successful, otherwise return false to indicate that
3161 commit isn't possible at this time. */
3162 static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw)
3165 struct pvr2_ctrl *cptr;
3166 int disruptive_change;
3168 /* Handle some required side effects when the video standard is
3170 if (hdw->std_dirty) {
3173 if (hdw->std_mask_cur & V4L2_STD_525_60) {
3180 /* Rewrite the vertical resolution to be appropriate to the
3181 video standard that has been selected. */
3182 if (nvres != hdw->res_ver_val) {
3183 hdw->res_ver_val = nvres;
3184 hdw->res_ver_dirty = !0;
3186 /* Rewrite the GOP size to be appropriate to the video
3187 standard that has been selected. */
3188 if (gop_size != hdw->enc_ctl_state.video_gop_size) {
3189 struct v4l2_ext_controls cs;
3190 struct v4l2_ext_control c1;
3191 memset(&cs, 0, sizeof(cs));
3192 memset(&c1, 0, sizeof(c1));
3195 c1.id = V4L2_CID_MPEG_VIDEO_GOP_SIZE;
3196 c1.value = gop_size;
3197 cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs,
3198 VIDIOC_S_EXT_CTRLS);
3202 if (hdw->input_dirty && hdw->state_pathway_ok &&
3203 (((hdw->input_val == PVR2_CVAL_INPUT_DTV) ?
3204 PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG) !=
3205 hdw->pathway_state)) {
3206 /* Change of mode being asked for... */
3207 hdw->state_pathway_ok = 0;
3208 trace_stbit("state_pathway_ok",hdw->state_pathway_ok);
3210 if (!hdw->state_pathway_ok) {
3211 /* Can't commit anything until pathway is ok. */
3214 /* The broadcast decoder can only scale down, so if
3215 * res_*_dirty && crop window < output format ==> enlarge crop.
3217 * The mpeg encoder receives fields of res_hor_val dots and
3218 * res_ver_val halflines. Limits: hor<=720, ver<=576.
3220 if (hdw->res_hor_dirty && hdw->cropw_val < hdw->res_hor_val) {
3221 hdw->cropw_val = hdw->res_hor_val;
3222 hdw->cropw_dirty = !0;
3223 } else if (hdw->cropw_dirty) {
3224 hdw->res_hor_dirty = !0; /* must rescale */
3225 hdw->res_hor_val = min(720, hdw->cropw_val);
3227 if (hdw->res_ver_dirty && hdw->croph_val < hdw->res_ver_val) {
3228 hdw->croph_val = hdw->res_ver_val;
3229 hdw->croph_dirty = !0;
3230 } else if (hdw->croph_dirty) {
3231 int nvres = hdw->std_mask_cur & V4L2_STD_525_60 ? 480 : 576;
3232 hdw->res_ver_dirty = !0;
3233 hdw->res_ver_val = min(nvres, hdw->croph_val);
3236 /* If any of the below has changed, then we can't do the update
3237 while the pipeline is running. Pipeline must be paused first
3238 and decoder -> encoder connection be made quiescent before we
3242 hdw->enc_unsafe_stale ||
3244 hdw->res_ver_dirty ||
3245 hdw->res_hor_dirty ||
3249 (hdw->active_stream_type != hdw->desired_stream_type));
3250 if (disruptive_change && !hdw->state_pipeline_idle) {
3251 /* Pipeline is not idle; we can't proceed. Arrange to
3252 cause pipeline to stop so that we can try this again
3254 hdw->state_pipeline_pause = !0;
3258 if (hdw->srate_dirty) {
3259 /* Write new sample rate into control structure since
3260 * the master copy is stale. We must track srate
3261 * separate from the mpeg control structure because
3262 * other logic also uses this value. */
3263 struct v4l2_ext_controls cs;
3264 struct v4l2_ext_control c1;
3265 memset(&cs,0,sizeof(cs));
3266 memset(&c1,0,sizeof(c1));
3269 c1.id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ;
3270 c1.value = hdw->srate_val;
3271 cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs,VIDIOC_S_EXT_CTRLS);
3274 if (hdw->active_stream_type != hdw->desired_stream_type) {
3275 /* Handle any side effects of stream config here */
3276 hdw->active_stream_type = hdw->desired_stream_type;
3279 if (hdw->hdw_desc->signal_routing_scheme ==
3280 PVR2_ROUTING_SCHEME_GOTVIEW) {
3282 /* Handle GOTVIEW audio switching */
3283 pvr2_hdw_gpio_get_out(hdw,&b);
3284 if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
3286 pvr2_hdw_gpio_chg_out(hdw,(1 << 11),~0);
3289 pvr2_hdw_gpio_chg_out(hdw,(1 << 11),0);
3293 /* Check and update state for all sub-devices. */
3294 pvr2_subdev_update(hdw);
3296 hdw->tuner_updated = 0;
3297 hdw->force_dirty = 0;
3298 for (idx = 0; idx < hdw->control_cnt; idx++) {
3299 cptr = hdw->controls + idx;
3300 if (!cptr->info->clear_dirty) continue;
3301 cptr->info->clear_dirty(cptr);
3304 if ((hdw->pathway_state == PVR2_PATHWAY_ANALOG) &&
3305 hdw->state_encoder_run) {
3306 /* If encoder isn't running or it can't be touched, then
3307 this will get worked out later when we start the
3309 if (pvr2_encoder_adjust(hdw) < 0) return !0;
3312 hdw->state_pipeline_config = !0;
3313 /* Hardware state may have changed in a way to cause the cropping
3314 capabilities to have changed. So mark it stale, which will
3315 cause a later re-fetch. */
3316 trace_stbit("state_pipeline_config",hdw->state_pipeline_config);
3321 int pvr2_hdw_commit_ctl(struct pvr2_hdw *hdw)
3324 LOCK_TAKE(hdw->big_lock);
3325 fl = pvr2_hdw_commit_setup(hdw);
3326 LOCK_GIVE(hdw->big_lock);
3328 return pvr2_hdw_wait(hdw,0);
3332 static void pvr2_hdw_worker_poll(struct work_struct *work)
3335 struct pvr2_hdw *hdw = container_of(work,struct pvr2_hdw,workpoll);
3336 LOCK_TAKE(hdw->big_lock); do {
3337 fl = pvr2_hdw_state_eval(hdw);
3338 } while (0); LOCK_GIVE(hdw->big_lock);
3339 if (fl && hdw->state_func) {
3340 hdw->state_func(hdw->state_data);
3345 static int pvr2_hdw_wait(struct pvr2_hdw *hdw,int state)
3347 return wait_event_interruptible(
3348 hdw->state_wait_data,
3349 (hdw->state_stale == 0) &&
3350 (!state || (hdw->master_state != state)));
3354 /* Return name for this driver instance */
3355 const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw)
3361 const char *pvr2_hdw_get_desc(struct pvr2_hdw *hdw)
3363 return hdw->hdw_desc->description;
3367 const char *pvr2_hdw_get_type(struct pvr2_hdw *hdw)
3369 return hdw->hdw_desc->shortname;
3373 int pvr2_hdw_is_hsm(struct pvr2_hdw *hdw)
3376 LOCK_TAKE(hdw->ctl_lock); do {
3377 hdw->cmd_buffer[0] = FX2CMD_GET_USB_SPEED;
3378 result = pvr2_send_request(hdw,
3381 if (result < 0) break;
3382 result = (hdw->cmd_buffer[0] != 0);
3383 } while(0); LOCK_GIVE(hdw->ctl_lock);
3388 /* Execute poll of tuner status */
3389 void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *hdw)
3391 LOCK_TAKE(hdw->big_lock); do {
3392 pvr2_hdw_status_poll(hdw);
3393 } while (0); LOCK_GIVE(hdw->big_lock);
3397 static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw)
3399 if (!hdw->cropcap_stale) {
3402 pvr2_hdw_status_poll(hdw);
3403 if (hdw->cropcap_stale) {
3410 /* Return information about cropping capabilities */
3411 int pvr2_hdw_get_cropcap(struct pvr2_hdw *hdw, struct v4l2_cropcap *pp)
3414 LOCK_TAKE(hdw->big_lock);
3415 stat = pvr2_hdw_check_cropcap(hdw);
3417 memcpy(pp, &hdw->cropcap_info, sizeof(hdw->cropcap_info));
3419 LOCK_GIVE(hdw->big_lock);
3424 /* Return information about the tuner */
3425 int pvr2_hdw_get_tuner_status(struct pvr2_hdw *hdw,struct v4l2_tuner *vtp)
3427 LOCK_TAKE(hdw->big_lock); do {
3428 if (hdw->tuner_signal_stale) {
3429 pvr2_hdw_status_poll(hdw);
3431 memcpy(vtp,&hdw->tuner_signal_info,sizeof(struct v4l2_tuner));
3432 } while (0); LOCK_GIVE(hdw->big_lock);
3437 /* Get handle to video output stream */
3438 struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *hp)
3440 return hp->vid_stream;
3444 void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw)
3446 int nr = pvr2_hdw_get_unit_number(hdw);
3447 LOCK_TAKE(hdw->big_lock); do {
3448 printk(KERN_INFO "pvrusb2: ================= START STATUS CARD #%d =================\n", nr);
3449 v4l2_device_call_all(&hdw->v4l2_dev, 0, core, log_status);
3450 pvr2_trace(PVR2_TRACE_INFO,"cx2341x config:");
3451 cx2341x_log_status(&hdw->enc_ctl_state, "pvrusb2");
3452 pvr2_hdw_state_log_state(hdw);
3453 printk(KERN_INFO "pvrusb2: ================== END STATUS CARD #%d ==================\n", nr);
3454 } while (0); LOCK_GIVE(hdw->big_lock);
3458 /* Grab EEPROM contents, needed for direct method. */
3459 #define EEPROM_SIZE 8192
3460 #define trace_eeprom(...) pvr2_trace(PVR2_TRACE_EEPROM,__VA_ARGS__)
3461 static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw)
3463 struct i2c_msg msg[2];
3472 eeprom = kmalloc(EEPROM_SIZE,GFP_KERNEL);
3474 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3475 "Failed to allocate memory"
3476 " required to read eeprom");
3480 trace_eeprom("Value for eeprom addr from controller was 0x%x",
3482 addr = hdw->eeprom_addr;
3483 /* Seems that if the high bit is set, then the *real* eeprom
3484 address is shifted right now bit position (noticed this in
3485 newer PVR USB2 hardware) */
3486 if (addr & 0x80) addr >>= 1;
3488 /* FX2 documentation states that a 16bit-addressed eeprom is
3489 expected if the I2C address is an odd number (yeah, this is
3490 strange but it's what they do) */
3491 mode16 = (addr & 1);
3492 eepromSize = (mode16 ? EEPROM_SIZE : 256);
3493 trace_eeprom("Examining %d byte eeprom at location 0x%x"
3494 " using %d bit addressing",eepromSize,addr,
3499 msg[0].len = mode16 ? 2 : 1;
3502 msg[1].flags = I2C_M_RD;
3504 /* We have to do the actual eeprom data fetch ourselves, because
3505 (1) we're only fetching part of the eeprom, and (2) if we were
3506 getting the whole thing our I2C driver can't grab it in one
3507 pass - which is what tveeprom is otherwise going to attempt */
3508 memset(eeprom,0,EEPROM_SIZE);
3509 for (tcnt = 0; tcnt < EEPROM_SIZE; tcnt += pcnt) {
3511 if (pcnt + tcnt > EEPROM_SIZE) pcnt = EEPROM_SIZE-tcnt;
3512 offs = tcnt + (eepromSize - EEPROM_SIZE);
3514 iadd[0] = offs >> 8;
3520 msg[1].buf = eeprom+tcnt;
3521 if ((ret = i2c_transfer(&hdw->i2c_adap,
3522 msg,ARRAY_SIZE(msg))) != 2) {
3523 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3524 "eeprom fetch set offs err=%d",ret);
3533 void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw,
3540 LOCK_TAKE(hdw->big_lock); do {
3541 if ((hdw->fw_buffer == NULL) == !enable_flag) break;
3544 pvr2_trace(PVR2_TRACE_FIRMWARE,
3545 "Cleaning up after CPU firmware fetch");
3546 kfree(hdw->fw_buffer);
3547 hdw->fw_buffer = NULL;
3549 if (hdw->fw_cpu_flag) {
3550 /* Now release the CPU. It will disconnect
3551 and reconnect later. */
3552 pvr2_hdw_cpureset_assert(hdw,0);
3557 hdw->fw_cpu_flag = (mode != 2);
3558 if (hdw->fw_cpu_flag) {
3559 hdw->fw_size = (mode == 1) ? 0x4000 : 0x2000;
3560 pvr2_trace(PVR2_TRACE_FIRMWARE,
3561 "Preparing to suck out CPU firmware"
3562 " (size=%u)", hdw->fw_size);
3563 hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL);
3564 if (!hdw->fw_buffer) {
3569 /* We have to hold the CPU during firmware upload. */
3570 pvr2_hdw_cpureset_assert(hdw,1);
3572 /* download the firmware from address 0000-1fff in 2048
3573 (=0x800) bytes chunk. */
3575 pvr2_trace(PVR2_TRACE_FIRMWARE,
3576 "Grabbing CPU firmware");
3577 pipe = usb_rcvctrlpipe(hdw->usb_dev, 0);
3578 for(address = 0; address < hdw->fw_size;
3580 ret = usb_control_msg(hdw->usb_dev,pipe,
3583 hdw->fw_buffer+address,
3588 pvr2_trace(PVR2_TRACE_FIRMWARE,
3589 "Done grabbing CPU firmware");
3591 pvr2_trace(PVR2_TRACE_FIRMWARE,
3592 "Sucking down EEPROM contents");
3593 hdw->fw_buffer = pvr2_full_eeprom_fetch(hdw);
3594 if (!hdw->fw_buffer) {
3595 pvr2_trace(PVR2_TRACE_FIRMWARE,
3596 "EEPROM content suck failed.");
3599 hdw->fw_size = EEPROM_SIZE;
3600 pvr2_trace(PVR2_TRACE_FIRMWARE,
3601 "Done sucking down EEPROM contents");
3604 } while (0); LOCK_GIVE(hdw->big_lock);
3608 /* Return true if we're in a mode for retrieval CPU firmware */
3609 int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *hdw)
3611 return hdw->fw_buffer != NULL;
3615 int pvr2_hdw_cpufw_get(struct pvr2_hdw *hdw,unsigned int offs,
3616 char *buf,unsigned int cnt)
3619 LOCK_TAKE(hdw->big_lock); do {
3623 if (!hdw->fw_buffer) {
3628 if (offs >= hdw->fw_size) {
3629 pvr2_trace(PVR2_TRACE_FIRMWARE,
3630 "Read firmware data offs=%d EOF",
3636 if (offs + cnt > hdw->fw_size) cnt = hdw->fw_size - offs;
3638 memcpy(buf,hdw->fw_buffer+offs,cnt);
3640 pvr2_trace(PVR2_TRACE_FIRMWARE,
3641 "Read firmware data offs=%d cnt=%d",
3644 } while (0); LOCK_GIVE(hdw->big_lock);
3650 int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *hdw,
3651 enum pvr2_v4l_type index)
3654 case pvr2_v4l_type_video: return hdw->v4l_minor_number_video;
3655 case pvr2_v4l_type_vbi: return hdw->v4l_minor_number_vbi;
3656 case pvr2_v4l_type_radio: return hdw->v4l_minor_number_radio;
3662 /* Store a v4l minor device number */
3663 void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *hdw,
3664 enum pvr2_v4l_type index,int v)
3667 case pvr2_v4l_type_video: hdw->v4l_minor_number_video = v;
3668 case pvr2_v4l_type_vbi: hdw->v4l_minor_number_vbi = v;
3669 case pvr2_v4l_type_radio: hdw->v4l_minor_number_radio = v;
3675 static void pvr2_ctl_write_complete(struct urb *urb)
3677 struct pvr2_hdw *hdw = urb->context;
3678 hdw->ctl_write_pend_flag = 0;
3679 if (hdw->ctl_read_pend_flag) return;
3680 complete(&hdw->ctl_done);
3684 static void pvr2_ctl_read_complete(struct urb *urb)
3686 struct pvr2_hdw *hdw = urb->context;
3687 hdw->ctl_read_pend_flag = 0;
3688 if (hdw->ctl_write_pend_flag) return;
3689 complete(&hdw->ctl_done);
3693 static void pvr2_ctl_timeout(unsigned long data)
3695 struct pvr2_hdw *hdw = (struct pvr2_hdw *)data;
3696 if (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) {
3697 hdw->ctl_timeout_flag = !0;
3698 if (hdw->ctl_write_pend_flag)
3699 usb_unlink_urb(hdw->ctl_write_urb);
3700 if (hdw->ctl_read_pend_flag)
3701 usb_unlink_urb(hdw->ctl_read_urb);
3706 /* Issue a command and get a response from the device. This extended
3707 version includes a probe flag (which if set means that device errors
3708 should not be logged or treated as fatal) and a timeout in jiffies.
3709 This can be used to non-lethally probe the health of endpoint 1. */
3710 static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
3711 unsigned int timeout,int probe_fl,
3712 void *write_data,unsigned int write_len,
3713 void *read_data,unsigned int read_len)
3717 struct timer_list timer;
3718 if (!hdw->ctl_lock_held) {
3719 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3720 "Attempted to execute control transfer"
3724 if (!hdw->flag_ok && !probe_fl) {
3725 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3726 "Attempted to execute control transfer"
3727 " when device not ok");
3730 if (!(hdw->ctl_read_urb && hdw->ctl_write_urb)) {
3732 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3733 "Attempted to execute control transfer"
3734 " when USB is disconnected");
3739 /* Ensure that we have sane parameters */
3740 if (!write_data) write_len = 0;
3741 if (!read_data) read_len = 0;
3742 if (write_len > PVR2_CTL_BUFFSIZE) {
3744 PVR2_TRACE_ERROR_LEGS,
3745 "Attempted to execute %d byte"
3746 " control-write transfer (limit=%d)",
3747 write_len,PVR2_CTL_BUFFSIZE);
3750 if (read_len > PVR2_CTL_BUFFSIZE) {
3752 PVR2_TRACE_ERROR_LEGS,
3753 "Attempted to execute %d byte"
3754 " control-read transfer (limit=%d)",
3755 write_len,PVR2_CTL_BUFFSIZE);
3758 if ((!write_len) && (!read_len)) {
3760 PVR2_TRACE_ERROR_LEGS,
3761 "Attempted to execute null control transfer?");
3766 hdw->cmd_debug_state = 1;
3768 hdw->cmd_debug_code = ((unsigned char *)write_data)[0];
3770 hdw->cmd_debug_code = 0;
3772 hdw->cmd_debug_write_len = write_len;
3773 hdw->cmd_debug_read_len = read_len;
3775 /* Initialize common stuff */
3776 init_completion(&hdw->ctl_done);
3777 hdw->ctl_timeout_flag = 0;
3778 hdw->ctl_write_pend_flag = 0;
3779 hdw->ctl_read_pend_flag = 0;
3781 timer.expires = jiffies + timeout;
3782 timer.data = (unsigned long)hdw;
3783 timer.function = pvr2_ctl_timeout;
3786 hdw->cmd_debug_state = 2;
3787 /* Transfer write data to internal buffer */
3788 for (idx = 0; idx < write_len; idx++) {
3789 hdw->ctl_write_buffer[idx] =
3790 ((unsigned char *)write_data)[idx];
3792 /* Initiate a write request */
3793 usb_fill_bulk_urb(hdw->ctl_write_urb,
3795 usb_sndbulkpipe(hdw->usb_dev,
3796 PVR2_CTL_WRITE_ENDPOINT),
3797 hdw->ctl_write_buffer,
3799 pvr2_ctl_write_complete,
3801 hdw->ctl_write_urb->actual_length = 0;
3802 hdw->ctl_write_pend_flag = !0;
3803 status = usb_submit_urb(hdw->ctl_write_urb,GFP_KERNEL);
3805 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3806 "Failed to submit write-control"
3807 " URB status=%d",status);
3808 hdw->ctl_write_pend_flag = 0;
3814 hdw->cmd_debug_state = 3;
3815 memset(hdw->ctl_read_buffer,0x43,read_len);
3816 /* Initiate a read request */
3817 usb_fill_bulk_urb(hdw->ctl_read_urb,
3819 usb_rcvbulkpipe(hdw->usb_dev,
3820 PVR2_CTL_READ_ENDPOINT),
3821 hdw->ctl_read_buffer,
3823 pvr2_ctl_read_complete,
3825 hdw->ctl_read_urb->actual_length = 0;
3826 hdw->ctl_read_pend_flag = !0;
3827 status = usb_submit_urb(hdw->ctl_read_urb,GFP_KERNEL);
3829 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3830 "Failed to submit read-control"
3831 " URB status=%d",status);
3832 hdw->ctl_read_pend_flag = 0;
3840 /* Now wait for all I/O to complete */
3841 hdw->cmd_debug_state = 4;
3842 while (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) {
3843 wait_for_completion(&hdw->ctl_done);
3845 hdw->cmd_debug_state = 5;
3848 del_timer_sync(&timer);
3850 hdw->cmd_debug_state = 6;
3853 if (hdw->ctl_timeout_flag) {
3854 status = -ETIMEDOUT;
3856 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3857 "Timed out control-write");
3863 /* Validate results of write request */
3864 if ((hdw->ctl_write_urb->status != 0) &&
3865 (hdw->ctl_write_urb->status != -ENOENT) &&
3866 (hdw->ctl_write_urb->status != -ESHUTDOWN) &&
3867 (hdw->ctl_write_urb->status != -ECONNRESET)) {
3868 /* USB subsystem is reporting some kind of failure
3870 status = hdw->ctl_write_urb->status;
3872 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3873 "control-write URB failure,"
3879 if (hdw->ctl_write_urb->actual_length < write_len) {
3880 /* Failed to write enough data */
3883 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3884 "control-write URB short,"
3885 " expected=%d got=%d",
3887 hdw->ctl_write_urb->actual_length);
3893 /* Validate results of read request */
3894 if ((hdw->ctl_read_urb->status != 0) &&
3895 (hdw->ctl_read_urb->status != -ENOENT) &&
3896 (hdw->ctl_read_urb->status != -ESHUTDOWN) &&
3897 (hdw->ctl_read_urb->status != -ECONNRESET)) {
3898 /* USB subsystem is reporting some kind of failure
3900 status = hdw->ctl_read_urb->status;
3902 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3903 "control-read URB failure,"
3909 if (hdw->ctl_read_urb->actual_length < read_len) {
3910 /* Failed to read enough data */
3913 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3914 "control-read URB short,"
3915 " expected=%d got=%d",
3917 hdw->ctl_read_urb->actual_length);
3921 /* Transfer retrieved data out from internal buffer */
3922 for (idx = 0; idx < read_len; idx++) {
3923 ((unsigned char *)read_data)[idx] =
3924 hdw->ctl_read_buffer[idx];
3930 hdw->cmd_debug_state = 0;
3931 if ((status < 0) && (!probe_fl)) {
3932 pvr2_hdw_render_useless(hdw);
3938 int pvr2_send_request(struct pvr2_hdw *hdw,
3939 void *write_data,unsigned int write_len,
3940 void *read_data,unsigned int read_len)
3942 return pvr2_send_request_ex(hdw,HZ*4,0,
3943 write_data,write_len,
3944 read_data,read_len);
3948 static int pvr2_issue_simple_cmd(struct pvr2_hdw *hdw,u32 cmdcode)
3951 unsigned int cnt = 1;
3952 unsigned int args = 0;
3953 LOCK_TAKE(hdw->ctl_lock);
3954 hdw->cmd_buffer[0] = cmdcode & 0xffu;
3955 args = (cmdcode >> 8) & 0xffu;
3956 args = (args > 2) ? 2 : args;
3959 hdw->cmd_buffer[1] = (cmdcode >> 16) & 0xffu;
3961 hdw->cmd_buffer[2] = (cmdcode >> 24) & 0xffu;
3964 if (pvrusb2_debug & PVR2_TRACE_INIT) {
3966 unsigned int ccnt,bcnt;
3970 ccnt = scnprintf(tbuf+bcnt,
3972 "Sending FX2 command 0x%x",cmdcode);
3974 for (idx = 0; idx < ARRAY_SIZE(pvr2_fx2cmd_desc); idx++) {
3975 if (pvr2_fx2cmd_desc[idx].id == cmdcode) {
3976 ccnt = scnprintf(tbuf+bcnt,
3979 pvr2_fx2cmd_desc[idx].desc);
3985 ccnt = scnprintf(tbuf+bcnt,
3987 " (%u",hdw->cmd_buffer[1]);
3990 ccnt = scnprintf(tbuf+bcnt,
3992 ",%u",hdw->cmd_buffer[2]);
3995 ccnt = scnprintf(tbuf+bcnt,
4000 pvr2_trace(PVR2_TRACE_INIT,"%.*s",bcnt,tbuf);
4002 ret = pvr2_send_request(hdw,hdw->cmd_buffer,cnt,NULL,0);
4003 LOCK_GIVE(hdw->ctl_lock);
4008 int pvr2_write_register(struct pvr2_hdw *hdw, u16 reg, u32 data)
4012 LOCK_TAKE(hdw->ctl_lock);
4014 hdw->cmd_buffer[0] = FX2CMD_REG_WRITE; /* write register prefix */
4015 PVR2_DECOMPOSE_LE(hdw->cmd_buffer,1,data);
4016 hdw->cmd_buffer[5] = 0;
4017 hdw->cmd_buffer[6] = (reg >> 8) & 0xff;
4018 hdw->cmd_buffer[7] = reg & 0xff;
4021 ret = pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 0);
4023 LOCK_GIVE(hdw->ctl_lock);
4029 static int pvr2_read_register(struct pvr2_hdw *hdw, u16 reg, u32 *data)
4033 LOCK_TAKE(hdw->ctl_lock);
4035 hdw->cmd_buffer[0] = FX2CMD_REG_READ; /* read register prefix */
4036 hdw->cmd_buffer[1] = 0;
4037 hdw->cmd_buffer[2] = 0;
4038 hdw->cmd_buffer[3] = 0;
4039 hdw->cmd_buffer[4] = 0;
4040 hdw->cmd_buffer[5] = 0;
4041 hdw->cmd_buffer[6] = (reg >> 8) & 0xff;
4042 hdw->cmd_buffer[7] = reg & 0xff;
4044 ret |= pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 4);
4045 *data = PVR2_COMPOSE_LE(hdw->cmd_buffer,0);
4047 LOCK_GIVE(hdw->ctl_lock);
4053 void pvr2_hdw_render_useless(struct pvr2_hdw *hdw)
4055 if (!hdw->flag_ok) return;
4056 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
4057 "Device being rendered inoperable");
4058 if (hdw->vid_stream) {
4059 pvr2_stream_setup(hdw->vid_stream,NULL,0,0);
4062 trace_stbit("flag_ok",hdw->flag_ok);
4063 pvr2_hdw_state_sched(hdw);
4067 void pvr2_hdw_device_reset(struct pvr2_hdw *hdw)
4070 pvr2_trace(PVR2_TRACE_INIT,"Performing a device reset...");
4071 ret = usb_lock_device_for_reset(hdw->usb_dev,NULL);
4073 ret = usb_reset_device(hdw->usb_dev);
4074 usb_unlock_device(hdw->usb_dev);
4076 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
4077 "Failed to lock USB device ret=%d",ret);
4079 if (init_pause_msec) {
4080 pvr2_trace(PVR2_TRACE_INFO,
4081 "Waiting %u msec for hardware to settle",
4083 msleep(init_pause_msec);
4089 void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val)
4095 if (!hdw->usb_dev) return;
4097 da = kmalloc(16, GFP_KERNEL);
4100 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
4101 "Unable to allocate memory to control CPU reset");
4105 pvr2_trace(PVR2_TRACE_INIT,"cpureset_assert(%d)",val);
4107 da[0] = val ? 0x01 : 0x00;
4109 /* Write the CPUCS register on the 8051. The lsb of the register
4110 is the reset bit; a 1 asserts reset while a 0 clears it. */
4111 pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
4112 ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,HZ);
4114 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
4115 "cpureset_assert(%d) error=%d",val,ret);
4116 pvr2_hdw_render_useless(hdw);
4123 int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *hdw)
4125 return pvr2_issue_simple_cmd(hdw,FX2CMD_DEEP_RESET);
4129 int pvr2_hdw_cmd_powerup(struct pvr2_hdw *hdw)
4131 return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_ON);
4135 int pvr2_hdw_cmd_powerdown(struct pvr2_hdw *hdw)
4137 return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_OFF);
4141 int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw)
4143 pvr2_trace(PVR2_TRACE_INIT,
4144 "Requesting decoder reset");
4145 if (hdw->decoder_client_id) {
4146 v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
4148 pvr2_hdw_cx25840_vbi_hack(hdw);
4151 pvr2_trace(PVR2_TRACE_INIT,
4152 "Unable to reset decoder: nothing attached");
4157 static int pvr2_hdw_cmd_hcw_demod_reset(struct pvr2_hdw *hdw, int onoff)
4160 return pvr2_issue_simple_cmd(hdw,
4161 FX2CMD_HCW_DEMOD_RESETIN |
4163 ((onoff ? 1 : 0) << 16));
4167 static int pvr2_hdw_cmd_onair_fe_power_ctrl(struct pvr2_hdw *hdw, int onoff)
4170 return pvr2_issue_simple_cmd(hdw,(onoff ?
4171 FX2CMD_ONAIR_DTV_POWER_ON :
4172 FX2CMD_ONAIR_DTV_POWER_OFF));
4176 static int pvr2_hdw_cmd_onair_digital_path_ctrl(struct pvr2_hdw *hdw,
4179 return pvr2_issue_simple_cmd(hdw,(onoff ?
4180 FX2CMD_ONAIR_DTV_STREAMING_ON :
4181 FX2CMD_ONAIR_DTV_STREAMING_OFF));
4185 static void pvr2_hdw_cmd_modeswitch(struct pvr2_hdw *hdw,int digitalFl)
4188 /* Compare digital/analog desired setting with current setting. If
4189 they don't match, fix it... */
4190 cmode = (digitalFl ? PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG);
4191 if (cmode == hdw->pathway_state) {
4192 /* They match; nothing to do */
4196 switch (hdw->hdw_desc->digital_control_scheme) {
4197 case PVR2_DIGITAL_SCHEME_HAUPPAUGE:
4198 pvr2_hdw_cmd_hcw_demod_reset(hdw,digitalFl);
4199 if (cmode == PVR2_PATHWAY_ANALOG) {
4200 /* If moving to analog mode, also force the decoder
4201 to reset. If no decoder is attached, then it's
4202 ok to ignore this because if/when the decoder
4203 attaches, it will reset itself at that time. */
4204 pvr2_hdw_cmd_decoder_reset(hdw);
4207 case PVR2_DIGITAL_SCHEME_ONAIR:
4208 /* Supposedly we should always have the power on whether in
4209 digital or analog mode. But for now do what appears to
4211 pvr2_hdw_cmd_onair_fe_power_ctrl(hdw,digitalFl);
4216 pvr2_hdw_untrip_unlocked(hdw);
4217 hdw->pathway_state = cmode;
4221 static void pvr2_led_ctrl_hauppauge(struct pvr2_hdw *hdw, int onoff)
4223 /* change some GPIO data
4225 * note: bit d7 of dir appears to control the LED,
4226 * so we shut it off here.
4230 pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000481);
4232 pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000401);
4234 pvr2_hdw_gpio_chg_out(hdw, 0xffffffff, 0x00000000);
4238 typedef void (*led_method_func)(struct pvr2_hdw *,int);
4240 static led_method_func led_methods[] = {
4241 [PVR2_LED_SCHEME_HAUPPAUGE] = pvr2_led_ctrl_hauppauge,
4246 static void pvr2_led_ctrl(struct pvr2_hdw *hdw,int onoff)
4248 unsigned int scheme_id;
4251 if ((!onoff) == (!hdw->led_on)) return;
4253 hdw->led_on = onoff != 0;
4255 scheme_id = hdw->hdw_desc->led_scheme;
4256 if (scheme_id < ARRAY_SIZE(led_methods)) {
4257 fp = led_methods[scheme_id];
4262 if (fp) (*fp)(hdw,onoff);
4266 /* Stop / start video stream transport */
4267 static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl)
4271 /* If we're in analog mode, then just issue the usual analog
4273 if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) {
4274 return pvr2_issue_simple_cmd(hdw,
4276 FX2CMD_STREAMING_ON :
4277 FX2CMD_STREAMING_OFF));
4278 /*Note: Not reached */
4281 if (hdw->pathway_state != PVR2_PATHWAY_DIGITAL) {
4282 /* Whoops, we don't know what mode we're in... */
4286 /* To get here we have to be in digital mode. The mechanism here
4287 is unfortunately different for different vendors. So we switch
4288 on the device's digital scheme attribute in order to figure out
4290 switch (hdw->hdw_desc->digital_control_scheme) {
4291 case PVR2_DIGITAL_SCHEME_HAUPPAUGE:
4292 return pvr2_issue_simple_cmd(hdw,
4294 FX2CMD_HCW_DTV_STREAMING_ON :
4295 FX2CMD_HCW_DTV_STREAMING_OFF));
4296 case PVR2_DIGITAL_SCHEME_ONAIR:
4297 ret = pvr2_issue_simple_cmd(hdw,
4299 FX2CMD_STREAMING_ON :
4300 FX2CMD_STREAMING_OFF));
4301 if (ret) return ret;
4302 return pvr2_hdw_cmd_onair_digital_path_ctrl(hdw,runFl);
4309 /* Evaluate whether or not state_pathway_ok can change */
4310 static int state_eval_pathway_ok(struct pvr2_hdw *hdw)
4312 if (hdw->state_pathway_ok) {
4313 /* Nothing to do if pathway is already ok */
4316 if (!hdw->state_pipeline_idle) {
4317 /* Not allowed to change anything if pipeline is not idle */
4320 pvr2_hdw_cmd_modeswitch(hdw,hdw->input_val == PVR2_CVAL_INPUT_DTV);
4321 hdw->state_pathway_ok = !0;
4322 trace_stbit("state_pathway_ok",hdw->state_pathway_ok);
4327 /* Evaluate whether or not state_encoder_ok can change */
4328 static int state_eval_encoder_ok(struct pvr2_hdw *hdw)
4330 if (hdw->state_encoder_ok) return 0;
4331 if (hdw->flag_tripped) return 0;
4332 if (hdw->state_encoder_run) return 0;
4333 if (hdw->state_encoder_config) return 0;
4334 if (hdw->state_decoder_run) return 0;
4335 if (hdw->state_usbstream_run) return 0;
4336 if (hdw->pathway_state == PVR2_PATHWAY_DIGITAL) {
4337 if (!hdw->hdw_desc->flag_digital_requires_cx23416) return 0;
4338 } else if (hdw->pathway_state != PVR2_PATHWAY_ANALOG) {
4342 if (pvr2_upload_firmware2(hdw) < 0) {
4343 hdw->flag_tripped = !0;
4344 trace_stbit("flag_tripped",hdw->flag_tripped);
4347 hdw->state_encoder_ok = !0;
4348 trace_stbit("state_encoder_ok",hdw->state_encoder_ok);
4353 /* Evaluate whether or not state_encoder_config can change */
4354 static int state_eval_encoder_config(struct pvr2_hdw *hdw)
4356 if (hdw->state_encoder_config) {
4357 if (hdw->state_encoder_ok) {
4358 if (hdw->state_pipeline_req &&
4359 !hdw->state_pipeline_pause) return 0;
4361 hdw->state_encoder_config = 0;
4362 hdw->state_encoder_waitok = 0;
4363 trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok);
4364 /* paranoia - solve race if timer just completed */
4365 del_timer_sync(&hdw->encoder_wait_timer);
4367 if (!hdw->state_pathway_ok ||
4368 (hdw->pathway_state != PVR2_PATHWAY_ANALOG) ||
4369 !hdw->state_encoder_ok ||
4370 !hdw->state_pipeline_idle ||
4371 hdw->state_pipeline_pause ||
4372 !hdw->state_pipeline_req ||
4373 !hdw->state_pipeline_config) {
4374 /* We must reset the enforced wait interval if
4375 anything has happened that might have disturbed
4376 the encoder. This should be a rare case. */
4377 if (timer_pending(&hdw->encoder_wait_timer)) {
4378 del_timer_sync(&hdw->encoder_wait_timer);
4380 if (hdw->state_encoder_waitok) {
4381 /* Must clear the state - therefore we did
4382 something to a state bit and must also
4384 hdw->state_encoder_waitok = 0;
4385 trace_stbit("state_encoder_waitok",
4386 hdw->state_encoder_waitok);
4391 if (!hdw->state_encoder_waitok) {
4392 if (!timer_pending(&hdw->encoder_wait_timer)) {
4393 /* waitok flag wasn't set and timer isn't
4394 running. Check flag once more to avoid
4395 a race then start the timer. This is
4396 the point when we measure out a minimal
4397 quiet interval before doing something to
4399 if (!hdw->state_encoder_waitok) {
4400 hdw->encoder_wait_timer.expires =
4402 (HZ * TIME_MSEC_ENCODER_WAIT
4404 add_timer(&hdw->encoder_wait_timer);
4407 /* We can't continue until we know we have been
4408 quiet for the interval measured by this
4412 pvr2_encoder_configure(hdw);
4413 if (hdw->state_encoder_ok) hdw->state_encoder_config = !0;
4415 trace_stbit("state_encoder_config",hdw->state_encoder_config);
4420 /* Return true if the encoder should not be running. */
4421 static int state_check_disable_encoder_run(struct pvr2_hdw *hdw)
4423 if (!hdw->state_encoder_ok) {
4424 /* Encoder isn't healthy at the moment, so stop it. */
4427 if (!hdw->state_pathway_ok) {
4428 /* Mode is not understood at the moment (i.e. it wants to
4429 change), so encoder must be stopped. */
4433 switch (hdw->pathway_state) {
4434 case PVR2_PATHWAY_ANALOG:
4435 if (!hdw->state_decoder_run) {
4436 /* We're in analog mode and the decoder is not
4437 running; thus the encoder should be stopped as
4442 case PVR2_PATHWAY_DIGITAL:
4443 if (hdw->state_encoder_runok) {
4444 /* This is a funny case. We're in digital mode so
4445 really the encoder should be stopped. However
4446 if it really is running, only kill it after
4447 runok has been set. This gives a chance for the
4448 onair quirk to function (encoder must run
4449 briefly first, at least once, before onair
4450 digital streaming can work). */
4455 /* Unknown mode; so encoder should be stopped. */
4459 /* If we get here, we haven't found a reason to stop the
4465 /* Return true if the encoder should be running. */
4466 static int state_check_enable_encoder_run(struct pvr2_hdw *hdw)
4468 if (!hdw->state_encoder_ok) {
4469 /* Don't run the encoder if it isn't healthy... */
4472 if (!hdw->state_pathway_ok) {
4473 /* Don't run the encoder if we don't (yet) know what mode
4474 we need to be in... */
4478 switch (hdw->pathway_state) {
4479 case PVR2_PATHWAY_ANALOG:
4480 if (hdw->state_decoder_run && hdw->state_decoder_ready) {
4481 /* In analog mode, if the decoder is running, then
4486 case PVR2_PATHWAY_DIGITAL:
4487 if ((hdw->hdw_desc->digital_control_scheme ==
4488 PVR2_DIGITAL_SCHEME_ONAIR) &&
4489 !hdw->state_encoder_runok) {
4490 /* This is a quirk. OnAir hardware won't stream
4491 digital until the encoder has been run at least
4492 once, for a minimal period of time (empiricially
4493 measured to be 1/4 second). So if we're on
4494 OnAir hardware and the encoder has never been
4495 run at all, then start the encoder. Normal
4496 state machine logic in the driver will
4497 automatically handle the remaining bits. */
4502 /* For completeness (unknown mode; encoder won't run ever) */
4505 /* If we get here, then we haven't found any reason to run the
4506 encoder, so don't run it. */
4511 /* Evaluate whether or not state_encoder_run can change */
4512 static int state_eval_encoder_run(struct pvr2_hdw *hdw)
4514 if (hdw->state_encoder_run) {
4515 if (!state_check_disable_encoder_run(hdw)) return 0;
4516 if (hdw->state_encoder_ok) {
4517 del_timer_sync(&hdw->encoder_run_timer);
4518 if (pvr2_encoder_stop(hdw) < 0) return !0;
4520 hdw->state_encoder_run = 0;
4522 if (!state_check_enable_encoder_run(hdw)) return 0;
4523 if (pvr2_encoder_start(hdw) < 0) return !0;
4524 hdw->state_encoder_run = !0;
4525 if (!hdw->state_encoder_runok) {
4526 hdw->encoder_run_timer.expires =
4527 jiffies + (HZ * TIME_MSEC_ENCODER_OK / 1000);
4528 add_timer(&hdw->encoder_run_timer);
4531 trace_stbit("state_encoder_run",hdw->state_encoder_run);
4536 /* Timeout function for quiescent timer. */
4537 static void pvr2_hdw_quiescent_timeout(unsigned long data)
4539 struct pvr2_hdw *hdw = (struct pvr2_hdw *)data;
4540 hdw->state_decoder_quiescent = !0;
4541 trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent);
4542 hdw->state_stale = !0;
4543 queue_work(hdw->workqueue,&hdw->workpoll);
4547 /* Timeout function for decoder stabilization timer. */
4548 static void pvr2_hdw_decoder_stabilization_timeout(unsigned long data)
4550 struct pvr2_hdw *hdw = (struct pvr2_hdw *)data;
4551 hdw->state_decoder_ready = !0;
4552 trace_stbit("state_decoder_ready", hdw->state_decoder_ready);
4553 hdw->state_stale = !0;
4554 queue_work(hdw->workqueue, &hdw->workpoll);
4558 /* Timeout function for encoder wait timer. */
4559 static void pvr2_hdw_encoder_wait_timeout(unsigned long data)
4561 struct pvr2_hdw *hdw = (struct pvr2_hdw *)data;
4562 hdw->state_encoder_waitok = !0;
4563 trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok);
4564 hdw->state_stale = !0;
4565 queue_work(hdw->workqueue,&hdw->workpoll);
4569 /* Timeout function for encoder run timer. */
4570 static void pvr2_hdw_encoder_run_timeout(unsigned long data)
4572 struct pvr2_hdw *hdw = (struct pvr2_hdw *)data;
4573 if (!hdw->state_encoder_runok) {
4574 hdw->state_encoder_runok = !0;
4575 trace_stbit("state_encoder_runok",hdw->state_encoder_runok);
4576 hdw->state_stale = !0;
4577 queue_work(hdw->workqueue,&hdw->workpoll);
4582 /* Evaluate whether or not state_decoder_run can change */
4583 static int state_eval_decoder_run(struct pvr2_hdw *hdw)
4585 if (hdw->state_decoder_run) {
4586 if (hdw->state_encoder_ok) {
4587 if (hdw->state_pipeline_req &&
4588 !hdw->state_pipeline_pause &&
4589 hdw->state_pathway_ok) return 0;
4591 if (!hdw->flag_decoder_missed) {
4592 pvr2_decoder_enable(hdw,0);
4594 hdw->state_decoder_quiescent = 0;
4595 hdw->state_decoder_run = 0;
4596 /* paranoia - solve race if timer(s) just completed */
4597 del_timer_sync(&hdw->quiescent_timer);
4598 /* Kill the stabilization timer, in case we're killing the
4599 encoder before the previous stabilization interval has
4600 been properly timed. */
4601 del_timer_sync(&hdw->decoder_stabilization_timer);
4602 hdw->state_decoder_ready = 0;
4604 if (!hdw->state_decoder_quiescent) {
4605 if (!timer_pending(&hdw->quiescent_timer)) {
4606 /* We don't do something about the
4607 quiescent timer until right here because
4608 we also want to catch cases where the
4609 decoder was already not running (like
4610 after initialization) as opposed to
4611 knowing that we had just stopped it.
4612 The second flag check is here to cover a
4613 race - the timer could have run and set
4614 this flag just after the previous check
4615 but before we did the pending check. */
4616 if (!hdw->state_decoder_quiescent) {
4617 hdw->quiescent_timer.expires =
4619 (HZ * TIME_MSEC_DECODER_WAIT
4621 add_timer(&hdw->quiescent_timer);
4624 /* Don't allow decoder to start again until it has
4625 been quiesced first. This little detail should
4626 hopefully further stabilize the encoder. */
4629 if (!hdw->state_pathway_ok ||
4630 (hdw->pathway_state != PVR2_PATHWAY_ANALOG) ||
4631 !hdw->state_pipeline_req ||
4632 hdw->state_pipeline_pause ||
4633 !hdw->state_pipeline_config ||
4634 !hdw->state_encoder_config ||
4635 !hdw->state_encoder_ok) return 0;
4636 del_timer_sync(&hdw->quiescent_timer);
4637 if (hdw->flag_decoder_missed) return 0;
4638 if (pvr2_decoder_enable(hdw,!0) < 0) return 0;
4639 hdw->state_decoder_quiescent = 0;
4640 hdw->state_decoder_ready = 0;
4641 hdw->state_decoder_run = !0;
4642 if (hdw->decoder_client_id == PVR2_CLIENT_ID_SAA7115) {
4643 hdw->decoder_stabilization_timer.expires =
4645 (HZ * TIME_MSEC_DECODER_STABILIZATION_WAIT /
4647 add_timer(&hdw->decoder_stabilization_timer);
4649 hdw->state_decoder_ready = !0;
4652 trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent);
4653 trace_stbit("state_decoder_run",hdw->state_decoder_run);
4654 trace_stbit("state_decoder_ready", hdw->state_decoder_ready);
4659 /* Evaluate whether or not state_usbstream_run can change */
4660 static int state_eval_usbstream_run(struct pvr2_hdw *hdw)
4662 if (hdw->state_usbstream_run) {
4664 if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) {
4665 fl = (hdw->state_encoder_ok &&
4666 hdw->state_encoder_run);
4667 } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) &&
4668 (hdw->hdw_desc->flag_digital_requires_cx23416)) {
4669 fl = hdw->state_encoder_ok;
4672 hdw->state_pipeline_req &&
4673 !hdw->state_pipeline_pause &&
4674 hdw->state_pathway_ok) {
4677 pvr2_hdw_cmd_usbstream(hdw,0);
4678 hdw->state_usbstream_run = 0;
4680 if (!hdw->state_pipeline_req ||
4681 hdw->state_pipeline_pause ||
4682 !hdw->state_pathway_ok) return 0;
4683 if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) {
4684 if (!hdw->state_encoder_ok ||
4685 !hdw->state_encoder_run) return 0;
4686 } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) &&
4687 (hdw->hdw_desc->flag_digital_requires_cx23416)) {
4688 if (!hdw->state_encoder_ok) return 0;
4689 if (hdw->state_encoder_run) return 0;
4690 if (hdw->hdw_desc->digital_control_scheme ==
4691 PVR2_DIGITAL_SCHEME_ONAIR) {
4692 /* OnAir digital receivers won't stream
4693 unless the analog encoder has run first.
4694 Why? I have no idea. But don't even
4695 try until we know the analog side is
4696 known to have run. */
4697 if (!hdw->state_encoder_runok) return 0;
4700 if (pvr2_hdw_cmd_usbstream(hdw,!0) < 0) return 0;
4701 hdw->state_usbstream_run = !0;
4703 trace_stbit("state_usbstream_run",hdw->state_usbstream_run);
4708 /* Attempt to configure pipeline, if needed */
4709 static int state_eval_pipeline_config(struct pvr2_hdw *hdw)
4711 if (hdw->state_pipeline_config ||
4712 hdw->state_pipeline_pause) return 0;
4713 pvr2_hdw_commit_execute(hdw);
4718 /* Update pipeline idle and pipeline pause tracking states based on other
4719 inputs. This must be called whenever the other relevant inputs have
4721 static int state_update_pipeline_state(struct pvr2_hdw *hdw)
4725 /* Update pipeline state */
4726 st = !(hdw->state_encoder_run ||
4727 hdw->state_decoder_run ||
4728 hdw->state_usbstream_run ||
4729 (!hdw->state_decoder_quiescent));
4730 if (!st != !hdw->state_pipeline_idle) {
4731 hdw->state_pipeline_idle = st;
4734 if (hdw->state_pipeline_idle && hdw->state_pipeline_pause) {
4735 hdw->state_pipeline_pause = 0;
4742 typedef int (*state_eval_func)(struct pvr2_hdw *);
4744 /* Set of functions to be run to evaluate various states in the driver. */
4745 static const state_eval_func eval_funcs[] = {
4746 state_eval_pathway_ok,
4747 state_eval_pipeline_config,
4748 state_eval_encoder_ok,
4749 state_eval_encoder_config,
4750 state_eval_decoder_run,
4751 state_eval_encoder_run,
4752 state_eval_usbstream_run,
4756 /* Process various states and return true if we did anything interesting. */
4757 static int pvr2_hdw_state_update(struct pvr2_hdw *hdw)
4760 int state_updated = 0;
4763 if (!hdw->state_stale) return 0;
4764 if ((hdw->fw1_state != FW1_STATE_OK) ||
4766 hdw->state_stale = 0;
4769 /* This loop is the heart of the entire driver. It keeps trying to
4770 evaluate various bits of driver state until nothing changes for
4771 one full iteration. Each "bit of state" tracks some global
4772 aspect of the driver, e.g. whether decoder should run, if
4773 pipeline is configured, usb streaming is on, etc. We separately
4774 evaluate each of those questions based on other driver state to
4775 arrive at the correct running configuration. */
4778 state_update_pipeline_state(hdw);
4779 /* Iterate over each bit of state */
4780 for (i = 0; (i<ARRAY_SIZE(eval_funcs)) && hdw->flag_ok; i++) {
4781 if ((*eval_funcs[i])(hdw)) {
4784 state_update_pipeline_state(hdw);
4787 } while (check_flag && hdw->flag_ok);
4788 hdw->state_stale = 0;
4789 trace_stbit("state_stale",hdw->state_stale);
4790 return state_updated;
4794 static unsigned int print_input_mask(unsigned int msk,
4795 char *buf,unsigned int acnt)
4797 unsigned int idx,ccnt;
4798 unsigned int tcnt = 0;
4799 for (idx = 0; idx < ARRAY_SIZE(control_values_input); idx++) {
4800 if (!((1 << idx) & msk)) continue;
4801 ccnt = scnprintf(buf+tcnt,
4805 control_values_input[idx]);
4812 static const char *pvr2_pathway_state_name(int id)
4815 case PVR2_PATHWAY_ANALOG: return "analog";
4816 case PVR2_PATHWAY_DIGITAL: return "digital";
4817 default: return "unknown";
4822 static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which,
4823 char *buf,unsigned int acnt)
4829 "driver:%s%s%s%s%s <mode=%s>",
4830 (hdw->flag_ok ? " <ok>" : " <fail>"),
4831 (hdw->flag_init_ok ? " <init>" : " <uninitialized>"),
4832 (hdw->flag_disconnected ? " <disconnected>" :
4834 (hdw->flag_tripped ? " <tripped>" : ""),
4835 (hdw->flag_decoder_missed ? " <no decoder>" : ""),
4836 pvr2_pathway_state_name(hdw->pathway_state));
4841 "pipeline:%s%s%s%s",
4842 (hdw->state_pipeline_idle ? " <idle>" : ""),
4843 (hdw->state_pipeline_config ?
4844 " <configok>" : " <stale>"),
4845 (hdw->state_pipeline_req ? " <req>" : ""),
4846 (hdw->state_pipeline_pause ? " <pause>" : ""));
4850 "worker:%s%s%s%s%s%s%s",
4851 (hdw->state_decoder_run ?
4852 (hdw->state_decoder_ready ?
4853 "<decode:run>" : " <decode:start>") :
4854 (hdw->state_decoder_quiescent ?
4855 "" : " <decode:stop>")),
4856 (hdw->state_decoder_quiescent ?
4857 " <decode:quiescent>" : ""),
4858 (hdw->state_encoder_ok ?
4859 "" : " <encode:init>"),
4860 (hdw->state_encoder_run ?
4861 (hdw->state_encoder_runok ?
4863 " <encode:firstrun>") :
4864 (hdw->state_encoder_runok ?
4866 " <encode:virgin>")),
4867 (hdw->state_encoder_config ?
4868 " <encode:configok>" :
4869 (hdw->state_encoder_waitok ?
4870 "" : " <encode:waitok>")),
4871 (hdw->state_usbstream_run ?
4872 " <usb:run>" : " <usb:stop>"),
4873 (hdw->state_pathway_ok ?
4874 " <pathway:ok>" : ""));
4879 pvr2_get_state_name(hdw->master_state));
4881 unsigned int tcnt = 0;
4884 ccnt = scnprintf(buf,
4886 "Hardware supported inputs: ");
4888 tcnt += print_input_mask(hdw->input_avail_mask,
4891 if (hdw->input_avail_mask != hdw->input_allowed_mask) {
4892 ccnt = scnprintf(buf+tcnt,
4894 "; allowed inputs: ");
4896 tcnt += print_input_mask(hdw->input_allowed_mask,
4903 struct pvr2_stream_stats stats;
4904 if (!hdw->vid_stream) break;
4905 pvr2_stream_get_stats(hdw->vid_stream,
4911 " URBs: queued=%u idle=%u ready=%u"
4912 " processed=%u failed=%u",
4913 stats.bytes_processed,
4914 stats.buffers_in_queue,
4915 stats.buffers_in_idle,
4916 stats.buffers_in_ready,
4917 stats.buffers_processed,
4918 stats.buffers_failed);
4921 unsigned int id = hdw->ir_scheme_active;
4922 return scnprintf(buf, acnt, "ir scheme: id=%d %s", id,
4923 (id >= ARRAY_SIZE(ir_scheme_names) ?
4924 "?" : ir_scheme_names[id]));
4932 /* Generate report containing info about attached sub-devices and attached
4933 i2c clients, including an indication of which attached i2c clients are
4934 actually sub-devices. */
4935 static unsigned int pvr2_hdw_report_clients(struct pvr2_hdw *hdw,
4936 char *buf, unsigned int acnt)
4938 struct v4l2_subdev *sd;
4939 unsigned int tcnt = 0;
4941 struct i2c_client *client;
4945 ccnt = scnprintf(buf, acnt, "Associated v4l2-subdev drivers and I2C clients:\n");
4947 v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) {
4950 if (id < ARRAY_SIZE(module_names)) p = module_names[id];
4952 ccnt = scnprintf(buf + tcnt, acnt - tcnt, " %s:", p);
4955 ccnt = scnprintf(buf + tcnt, acnt - tcnt,
4956 " (unknown id=%u):", id);
4959 client = v4l2_get_subdevdata(sd);
4961 ccnt = scnprintf(buf + tcnt, acnt - tcnt,
4962 " %s @ %02x\n", client->name,
4966 ccnt = scnprintf(buf + tcnt, acnt - tcnt,
4967 " no i2c client\n");
4975 unsigned int pvr2_hdw_state_report(struct pvr2_hdw *hdw,
4976 char *buf,unsigned int acnt)
4978 unsigned int bcnt,ccnt,idx;
4980 LOCK_TAKE(hdw->big_lock);
4981 for (idx = 0; ; idx++) {
4982 ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,acnt);
4984 bcnt += ccnt; acnt -= ccnt; buf += ccnt;
4986 buf[0] = '\n'; ccnt = 1;
4987 bcnt += ccnt; acnt -= ccnt; buf += ccnt;
4989 ccnt = pvr2_hdw_report_clients(hdw, buf, acnt);
4990 bcnt += ccnt; acnt -= ccnt; buf += ccnt;
4991 LOCK_GIVE(hdw->big_lock);
4996 static void pvr2_hdw_state_log_state(struct pvr2_hdw *hdw)
4999 unsigned int idx, ccnt;
5000 unsigned int lcnt, ucnt;
5002 for (idx = 0; ; idx++) {
5003 ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,sizeof(buf));
5005 printk(KERN_INFO "%s %.*s\n",hdw->name,ccnt,buf);
5007 ccnt = pvr2_hdw_report_clients(hdw, buf, sizeof(buf));
5009 while (ucnt < ccnt) {
5011 while ((lcnt + ucnt < ccnt) && (buf[lcnt + ucnt] != '\n')) {
5014 printk(KERN_INFO "%s %.*s\n", hdw->name, lcnt, buf + ucnt);
5020 /* Evaluate and update the driver's current state, taking various actions
5021 as appropriate for the update. */
5022 static int pvr2_hdw_state_eval(struct pvr2_hdw *hdw)
5025 int state_updated = 0;
5026 int callback_flag = 0;
5029 pvr2_trace(PVR2_TRACE_STBITS,
5030 "Drive state check START");
5031 if (pvrusb2_debug & PVR2_TRACE_STBITS) {
5032 pvr2_hdw_state_log_state(hdw);
5035 /* Process all state and get back over disposition */
5036 state_updated = pvr2_hdw_state_update(hdw);
5038 analog_mode = (hdw->pathway_state != PVR2_PATHWAY_DIGITAL);
5040 /* Update master state based upon all other states. */
5041 if (!hdw->flag_ok) {
5042 st = PVR2_STATE_DEAD;
5043 } else if (hdw->fw1_state != FW1_STATE_OK) {
5044 st = PVR2_STATE_COLD;
5045 } else if ((analog_mode ||
5046 hdw->hdw_desc->flag_digital_requires_cx23416) &&
5047 !hdw->state_encoder_ok) {
5048 st = PVR2_STATE_WARM;
5049 } else if (hdw->flag_tripped ||
5050 (analog_mode && hdw->flag_decoder_missed)) {
5051 st = PVR2_STATE_ERROR;
5052 } else if (hdw->state_usbstream_run &&
5054 (hdw->state_encoder_run && hdw->state_decoder_run))) {
5055 st = PVR2_STATE_RUN;
5057 st = PVR2_STATE_READY;
5059 if (hdw->master_state != st) {
5060 pvr2_trace(PVR2_TRACE_STATE,
5061 "Device state change from %s to %s",
5062 pvr2_get_state_name(hdw->master_state),
5063 pvr2_get_state_name(st));
5064 pvr2_led_ctrl(hdw,st == PVR2_STATE_RUN);
5065 hdw->master_state = st;
5069 if (state_updated) {
5070 /* Trigger anyone waiting on any state changes here. */
5071 wake_up(&hdw->state_wait_data);
5074 if (pvrusb2_debug & PVR2_TRACE_STBITS) {
5075 pvr2_hdw_state_log_state(hdw);
5077 pvr2_trace(PVR2_TRACE_STBITS,
5078 "Drive state check DONE callback=%d",callback_flag);
5080 return callback_flag;
5084 /* Cause kernel thread to check / update driver state */
5085 static void pvr2_hdw_state_sched(struct pvr2_hdw *hdw)
5087 if (hdw->state_stale) return;
5088 hdw->state_stale = !0;
5089 trace_stbit("state_stale",hdw->state_stale);
5090 queue_work(hdw->workqueue,&hdw->workpoll);
5094 int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *dp)
5096 return pvr2_read_register(hdw,PVR2_GPIO_DIR,dp);
5100 int pvr2_hdw_gpio_get_out(struct pvr2_hdw *hdw,u32 *dp)
5102 return pvr2_read_register(hdw,PVR2_GPIO_OUT,dp);
5106 int pvr2_hdw_gpio_get_in(struct pvr2_hdw *hdw,u32 *dp)
5108 return pvr2_read_register(hdw,PVR2_GPIO_IN,dp);
5112 int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val)
5117 ret = pvr2_read_register(hdw,PVR2_GPIO_DIR,&cval);
5118 if (ret) return ret;
5119 nval = (cval & ~msk) | (val & msk);
5120 pvr2_trace(PVR2_TRACE_GPIO,
5121 "GPIO direction changing 0x%x:0x%x"
5122 " from 0x%x to 0x%x",
5126 pvr2_trace(PVR2_TRACE_GPIO,
5127 "GPIO direction changing to 0x%x",nval);
5129 return pvr2_write_register(hdw,PVR2_GPIO_DIR,nval);
5133 int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val)
5138 ret = pvr2_read_register(hdw,PVR2_GPIO_OUT,&cval);
5139 if (ret) return ret;
5140 nval = (cval & ~msk) | (val & msk);
5141 pvr2_trace(PVR2_TRACE_GPIO,
5142 "GPIO output changing 0x%x:0x%x from 0x%x to 0x%x",
5146 pvr2_trace(PVR2_TRACE_GPIO,
5147 "GPIO output changing to 0x%x",nval);
5149 return pvr2_write_register(hdw,PVR2_GPIO_OUT,nval);
5153 void pvr2_hdw_status_poll(struct pvr2_hdw *hdw)
5155 struct v4l2_tuner *vtp = &hdw->tuner_signal_info;
5156 memset(vtp, 0, sizeof(*vtp));
5157 hdw->tuner_signal_stale = 0;
5158 /* Note: There apparently is no replacement for VIDIOC_CROPCAP
5159 using v4l2-subdev - therefore we can't support that AT ALL right
5160 now. (Of course, no sub-drivers seem to implement it either.
5161 But now it's a a chicken and egg problem...) */
5162 v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, g_tuner,
5163 &hdw->tuner_signal_info);
5164 pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll"
5165 " type=%u strength=%u audio=0x%x cap=0x%x"
5168 vtp->signal, vtp->rxsubchans, vtp->capability,
5169 vtp->rangelow, vtp->rangehigh);
5171 /* We have to do this to avoid getting into constant polling if
5172 there's nobody to answer a poll of cropcap info. */
5173 hdw->cropcap_stale = 0;
5177 unsigned int pvr2_hdw_get_input_available(struct pvr2_hdw *hdw)
5179 return hdw->input_avail_mask;
5183 unsigned int pvr2_hdw_get_input_allowed(struct pvr2_hdw *hdw)
5185 return hdw->input_allowed_mask;
5189 static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v)
5191 if (hdw->input_val != v) {
5193 hdw->input_dirty = !0;
5196 /* Handle side effects - if we switch to a mode that needs the RF
5197 tuner, then select the right frequency choice as well and mark
5199 if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
5200 hdw->freqSelector = 0;
5201 hdw->freqDirty = !0;
5202 } else if ((hdw->input_val == PVR2_CVAL_INPUT_TV) ||
5203 (hdw->input_val == PVR2_CVAL_INPUT_DTV)) {
5204 hdw->freqSelector = 1;
5205 hdw->freqDirty = !0;
5211 int pvr2_hdw_set_input_allowed(struct pvr2_hdw *hdw,
5212 unsigned int change_mask,
5213 unsigned int change_val)
5216 unsigned int nv,m,idx;
5217 LOCK_TAKE(hdw->big_lock);
5219 nv = hdw->input_allowed_mask & ~change_mask;
5220 nv |= (change_val & change_mask);
5221 nv &= hdw->input_avail_mask;
5223 /* No legal modes left; return error instead. */
5227 hdw->input_allowed_mask = nv;
5228 if ((1 << hdw->input_val) & hdw->input_allowed_mask) {
5229 /* Current mode is still in the allowed mask, so
5233 /* Select and switch to a mode that is still in the allowed
5235 if (!hdw->input_allowed_mask) {
5236 /* Nothing legal; give up */
5239 m = hdw->input_allowed_mask;
5240 for (idx = 0; idx < (sizeof(m) << 3); idx++) {
5241 if (!((1 << idx) & m)) continue;
5242 pvr2_hdw_set_input(hdw,idx);
5246 LOCK_GIVE(hdw->big_lock);
5251 /* Find I2C address of eeprom */
5252 static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw)
5255 LOCK_TAKE(hdw->ctl_lock); do {
5256 hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR;
5257 result = pvr2_send_request(hdw,
5260 if (result < 0) break;
5261 result = hdw->cmd_buffer[0];
5262 } while(0); LOCK_GIVE(hdw->ctl_lock);
5267 int pvr2_hdw_register_access(struct pvr2_hdw *hdw,
5268 struct v4l2_dbg_match *match, u64 reg_id,
5269 int setFl, u64 *val_ptr)
5271 #ifdef CONFIG_VIDEO_ADV_DEBUG
5272 struct v4l2_dbg_register req;
5276 if (!capable(CAP_SYS_ADMIN)) return -EPERM;
5280 if (setFl) req.val = *val_ptr;
5281 /* It would be nice to know if a sub-device answered the request */
5282 v4l2_device_call_all(&hdw->v4l2_dev, 0, core, g_register, &req);
5283 if (!setFl) *val_ptr = req.val;
5295 Stuff for Emacs to see, in order to encourage consistent editing style:
5296 *** Local Variables: ***
5298 *** fill-column: 75 ***
5299 *** tab-width: 8 ***
5300 *** c-basic-offset: 8 ***