2 * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
4 * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
5 * This code is placed under the terms of the GNU General Public License v2
9 #include <linux/slab.h>
10 #include <linux/videodev2.h>
11 #include <linux/delay.h>
12 #include <media/v4l2-device.h>
13 #include <media/tvp5150.h>
14 #include <media/v4l2-chip-ident.h>
15 #include <media/v4l2-ctrls.h>
17 #include "tvp5150_reg.h"
19 MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
20 MODULE_AUTHOR("Mauro Carvalho Chehab");
21 MODULE_LICENSE("GPL");
25 module_param(debug, int, 0);
26 MODULE_PARM_DESC(debug, "Debug level (0-2)");
29 struct v4l2_subdev sd;
30 struct v4l2_ctrl_handler hdl;
32 v4l2_std_id norm; /* Current set standard */
38 static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
40 return container_of(sd, struct tvp5150, sd);
43 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
45 return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
48 static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
50 struct i2c_client *c = v4l2_get_subdevdata(sd);
51 unsigned char buffer[1];
55 if (1 != (rc = i2c_master_send(c, buffer, 1)))
56 v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
60 if (1 != (rc = i2c_master_recv(c, buffer, 1)))
61 v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
63 v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
68 static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
71 struct i2c_client *c = v4l2_get_subdevdata(sd);
72 unsigned char buffer[2];
77 v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
78 if (2 != (rc = i2c_master_send(c, buffer, 2)))
79 v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
82 static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
83 const u8 end, int max_line)
87 while (init != (u8)(end + 1)) {
88 if ((i % max_line) == 0) {
91 printk("tvp5150: %s reg 0x%02x = ", s, init);
93 printk("%02x ", tvp5150_read(sd, init));
101 static int tvp5150_log_status(struct v4l2_subdev *sd)
103 printk("tvp5150: Video input source selection #1 = 0x%02x\n",
104 tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
105 printk("tvp5150: Analog channel controls = 0x%02x\n",
106 tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
107 printk("tvp5150: Operation mode controls = 0x%02x\n",
108 tvp5150_read(sd, TVP5150_OP_MODE_CTL));
109 printk("tvp5150: Miscellaneous controls = 0x%02x\n",
110 tvp5150_read(sd, TVP5150_MISC_CTL));
111 printk("tvp5150: Autoswitch mask= 0x%02x\n",
112 tvp5150_read(sd, TVP5150_AUTOSW_MSK));
113 printk("tvp5150: Color killer threshold control = 0x%02x\n",
114 tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
115 printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
116 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
117 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
118 tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
119 printk("tvp5150: Brightness control = 0x%02x\n",
120 tvp5150_read(sd, TVP5150_BRIGHT_CTL));
121 printk("tvp5150: Color saturation control = 0x%02x\n",
122 tvp5150_read(sd, TVP5150_SATURATION_CTL));
123 printk("tvp5150: Hue control = 0x%02x\n",
124 tvp5150_read(sd, TVP5150_HUE_CTL));
125 printk("tvp5150: Contrast control = 0x%02x\n",
126 tvp5150_read(sd, TVP5150_CONTRAST_CTL));
127 printk("tvp5150: Outputs and data rates select = 0x%02x\n",
128 tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
129 printk("tvp5150: Configuration shared pins = 0x%02x\n",
130 tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
131 printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
132 tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
133 tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
134 printk("tvp5150: Active video cropping stop = 0x%02x%02x\n",
135 tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
136 tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
137 printk("tvp5150: Genlock/RTC = 0x%02x\n",
138 tvp5150_read(sd, TVP5150_GENLOCK));
139 printk("tvp5150: Horizontal sync start = 0x%02x\n",
140 tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
141 printk("tvp5150: Vertical blanking start = 0x%02x\n",
142 tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
143 printk("tvp5150: Vertical blanking stop = 0x%02x\n",
144 tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
145 printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
146 tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
147 tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
148 printk("tvp5150: Interrupt reset register B = 0x%02x\n",
149 tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
150 printk("tvp5150: Interrupt enable register B = 0x%02x\n",
151 tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
152 printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
153 tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
154 printk("tvp5150: Video standard = 0x%02x\n",
155 tvp5150_read(sd, TVP5150_VIDEO_STD));
156 printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
157 tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
158 tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
159 printk("tvp5150: Macrovision on counter = 0x%02x\n",
160 tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
161 printk("tvp5150: Macrovision off counter = 0x%02x\n",
162 tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
163 printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
164 (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
165 printk("tvp5150: Device ID = %02x%02x\n",
166 tvp5150_read(sd, TVP5150_MSB_DEV_ID),
167 tvp5150_read(sd, TVP5150_LSB_DEV_ID));
168 printk("tvp5150: ROM version = (hex) %02x.%02x\n",
169 tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
170 tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
171 printk("tvp5150: Vertical line count = 0x%02x%02x\n",
172 tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
173 tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
174 printk("tvp5150: Interrupt status register B = 0x%02x\n",
175 tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
176 printk("tvp5150: Interrupt active register B = 0x%02x\n",
177 tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
178 printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
179 tvp5150_read(sd, TVP5150_STATUS_REG_1),
180 tvp5150_read(sd, TVP5150_STATUS_REG_2),
181 tvp5150_read(sd, TVP5150_STATUS_REG_3),
182 tvp5150_read(sd, TVP5150_STATUS_REG_4),
183 tvp5150_read(sd, TVP5150_STATUS_REG_5));
185 dump_reg_range(sd, "Teletext filter 1", TVP5150_TELETEXT_FIL1_INI,
186 TVP5150_TELETEXT_FIL1_END, 8);
187 dump_reg_range(sd, "Teletext filter 2", TVP5150_TELETEXT_FIL2_INI,
188 TVP5150_TELETEXT_FIL2_END, 8);
190 printk("tvp5150: Teletext filter enable = 0x%02x\n",
191 tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
192 printk("tvp5150: Interrupt status register A = 0x%02x\n",
193 tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
194 printk("tvp5150: Interrupt enable register A = 0x%02x\n",
195 tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
196 printk("tvp5150: Interrupt configuration = 0x%02x\n",
197 tvp5150_read(sd, TVP5150_INT_CONF));
198 printk("tvp5150: VDP status register = 0x%02x\n",
199 tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
200 printk("tvp5150: FIFO word count = 0x%02x\n",
201 tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
202 printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
203 tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
204 printk("tvp5150: FIFO reset = 0x%02x\n",
205 tvp5150_read(sd, TVP5150_FIFO_RESET));
206 printk("tvp5150: Line number interrupt = 0x%02x\n",
207 tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
208 printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
209 tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
210 tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
211 printk("tvp5150: FIFO output control = 0x%02x\n",
212 tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
213 printk("tvp5150: Full field enable = 0x%02x\n",
214 tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
215 printk("tvp5150: Full field mode register = 0x%02x\n",
216 tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
218 dump_reg_range(sd, "CC data", TVP5150_CC_DATA_INI,
219 TVP5150_CC_DATA_END, 8);
221 dump_reg_range(sd, "WSS data", TVP5150_WSS_DATA_INI,
222 TVP5150_WSS_DATA_END, 8);
224 dump_reg_range(sd, "VPS data", TVP5150_VPS_DATA_INI,
225 TVP5150_VPS_DATA_END, 8);
227 dump_reg_range(sd, "VITC data", TVP5150_VITC_DATA_INI,
228 TVP5150_VITC_DATA_END, 10);
230 dump_reg_range(sd, "Line mode", TVP5150_LINE_MODE_INI,
231 TVP5150_LINE_MODE_END, 8);
235 /****************************************************************************
237 ****************************************************************************/
239 static inline void tvp5150_selmux(struct v4l2_subdev *sd)
242 struct tvp5150 *decoder = to_tvp5150(sd);
246 if ((decoder->output & TVP5150_BLACK_SCREEN) || !decoder->enable)
249 switch (decoder->input) {
250 case TVP5150_COMPOSITE1:
253 case TVP5150_COMPOSITE0:
261 v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
262 "=> tvp5150 input=%i, opmode=%i\n",
263 decoder->input, decoder->output,
266 tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
267 tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
269 /* Svideo should enable YCrCb output and disable GPCL output
270 * For Composite and TV, it should be the reverse
272 val = tvp5150_read(sd, TVP5150_MISC_CTL);
273 if (decoder->input == TVP5150_SVIDEO)
274 val = (val & ~0x40) | 0x10;
276 val = (val & ~0x10) | 0x40;
277 tvp5150_write(sd, TVP5150_MISC_CTL, val);
280 struct i2c_reg_value {
285 /* Default values as sugested at TVP5150AM1 datasheet */
286 static const struct i2c_reg_value tvp5150_init_default[] = {
288 TVP5150_VD_IN_SRC_SEL_1,0x00
291 TVP5150_ANAL_CHL_CTL,0x15
294 TVP5150_OP_MODE_CTL,0x00
297 TVP5150_MISC_CTL,0x01
300 TVP5150_COLOR_KIL_THSH_CTL,0x10
303 TVP5150_LUMA_PROC_CTL_1,0x60
306 TVP5150_LUMA_PROC_CTL_2,0x00
309 TVP5150_BRIGHT_CTL,0x80
312 TVP5150_SATURATION_CTL,0x80
318 TVP5150_CONTRAST_CTL,0x80
321 TVP5150_DATA_RATE_SEL,0x47
324 TVP5150_LUMA_PROC_CTL_3,0x00
327 TVP5150_CONF_SHARED_PIN,0x08
330 TVP5150_ACT_VD_CROP_ST_MSB,0x00
333 TVP5150_ACT_VD_CROP_ST_LSB,0x00
336 TVP5150_ACT_VD_CROP_STP_MSB,0x00
339 TVP5150_ACT_VD_CROP_STP_LSB,0x00
345 TVP5150_HORIZ_SYNC_START,0x80
348 TVP5150_VERT_BLANKING_START,0x00
351 TVP5150_VERT_BLANKING_STOP,0x00
354 TVP5150_CHROMA_PROC_CTL_1,0x0c
357 TVP5150_CHROMA_PROC_CTL_2,0x14
360 TVP5150_INT_RESET_REG_B,0x00
363 TVP5150_INT_ENABLE_REG_B,0x00
366 TVP5150_INTT_CONFIG_REG_B,0x00
369 TVP5150_VIDEO_STD,0x00
372 TVP5150_MACROVISION_ON_CTR,0x0f
375 TVP5150_MACROVISION_OFF_CTR,0x01
378 TVP5150_TELETEXT_FIL_ENA,0x00
381 TVP5150_INT_STATUS_REG_A,0x00
384 TVP5150_INT_ENABLE_REG_A,0x00
387 TVP5150_INT_CONF,0x04
390 TVP5150_FIFO_INT_THRESHOLD,0x80
393 TVP5150_FIFO_RESET,0x00
396 TVP5150_LINE_NUMBER_INT,0x00
399 TVP5150_PIX_ALIGN_REG_LOW,0x4e
402 TVP5150_PIX_ALIGN_REG_HIGH,0x00
405 TVP5150_FIFO_OUT_CTRL,0x01
408 TVP5150_FULL_FIELD_ENA,0x00
411 TVP5150_LINE_MODE_INI,0x00
414 TVP5150_FULL_FIELD_MODE_REG,0x7f
421 /* Default values as sugested at TVP5150AM1 datasheet */
422 static const struct i2c_reg_value tvp5150_init_enable[] = {
424 TVP5150_CONF_SHARED_PIN, 2
425 },{ /* Automatic offset and AGC enabled */
426 TVP5150_ANAL_CHL_CTL, 0x15
427 },{ /* Activate YCrCb output 0x9 or 0xd ? */
428 TVP5150_MISC_CTL, 0x6f
429 },{ /* Activates video std autodetection for all standards */
430 TVP5150_AUTOSW_MSK, 0x0
431 },{ /* Default format: 0x47. For 4:2:2: 0x40 */
432 TVP5150_DATA_RATE_SEL, 0x47
434 TVP5150_CHROMA_PROC_CTL_1, 0x0c
436 TVP5150_CHROMA_PROC_CTL_2, 0x54
437 },{ /* Non documented, but initialized on WinTV USB2 */
444 struct tvp5150_vbi_type {
445 unsigned int vbi_type;
446 unsigned int ini_line;
447 unsigned int end_line;
448 unsigned int by_field :1;
451 struct i2c_vbi_ram_value {
453 struct tvp5150_vbi_type type;
454 unsigned char values[16];
457 /* This struct have the values for each supported VBI Standard
459 tvp5150_vbi_types should follow the same order as vbi_ram_default
460 * value 0 means rom position 0x10, value 1 means rom position 0x30
461 * and so on. There are 16 possible locations from 0 to 15.
464 static struct i2c_vbi_ram_value vbi_ram_default[] =
466 /* FIXME: Current api doesn't handle all VBI types, those not
467 yet supported are placed under #if 0 */
469 {0x010, /* Teletext, SECAM, WST System A */
470 {V4L2_SLICED_TELETEXT_SECAM,6,23,1},
471 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
472 0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
475 {0x030, /* Teletext, PAL, WST System B */
476 {V4L2_SLICED_TELETEXT_B,6,22,1},
477 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
478 0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
481 {0x050, /* Teletext, PAL, WST System C */
482 {V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
483 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
484 0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
486 {0x070, /* Teletext, NTSC, WST System B */
487 {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
488 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
489 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
491 {0x090, /* Tetetext, NTSC NABTS System C */
492 {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
493 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
494 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
496 {0x0b0, /* Teletext, NTSC-J, NABTS System D */
497 {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
498 { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
499 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
501 {0x0d0, /* Closed Caption, PAL/SECAM */
502 {V4L2_SLICED_CAPTION_625,22,22,1},
503 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
504 0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
507 {0x0f0, /* Closed Caption, NTSC */
508 {V4L2_SLICED_CAPTION_525,21,21,1},
509 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
510 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
512 {0x110, /* Wide Screen Signal, PAL/SECAM */
513 {V4L2_SLICED_WSS_625,23,23,1},
514 { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
515 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
518 {0x130, /* Wide Screen Signal, NTSC C */
519 {V4L2_SLICED_WSS_525,20,20,1},
520 { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
521 0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
523 {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
524 {V4l2_SLICED_VITC_625,6,22,0},
525 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
526 0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
528 {0x170, /* Vertical Interval Timecode (VITC), NTSC */
529 {V4l2_SLICED_VITC_525,10,20,0},
530 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
531 0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
534 {0x190, /* Video Program System (VPS), PAL */
535 {V4L2_SLICED_VPS,16,16,0},
536 { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
537 0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
539 /* 0x1d0 User programmable */
545 static int tvp5150_write_inittab(struct v4l2_subdev *sd,
546 const struct i2c_reg_value *regs)
548 while (regs->reg != 0xff) {
549 tvp5150_write(sd, regs->reg, regs->value);
555 static int tvp5150_vdp_init(struct v4l2_subdev *sd,
556 const struct i2c_vbi_ram_value *regs)
560 /* Disable Full Field */
561 tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
563 /* Before programming, Line mode should be at 0xff */
564 for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
565 tvp5150_write(sd, i, 0xff);
568 while (regs->reg != (u16)-1) {
569 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
570 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
572 for (i = 0; i < 16; i++)
573 tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
580 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
581 static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
582 struct v4l2_sliced_vbi_cap *cap)
584 const struct i2c_vbi_ram_value *regs = vbi_ram_default;
587 v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n");
588 memset(cap, 0, sizeof *cap);
590 while (regs->reg != (u16)-1 ) {
591 for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
592 cap->service_lines[0][line] |= regs->type.vbi_type;
594 cap->service_set |= regs->type.vbi_type;
601 /* Set vbi processing
602 * type - one of tvp5150_vbi_types
603 * line - line to gather data
604 * fields: bit 0 field1, bit 1, field2
605 * flags (default=0xf0) is a bitmask, were set means:
606 * bit 7: enable filtering null bytes on CC
607 * bit 6: send data also to FIFO
608 * bit 5: don't allow data with errors on FIFO
609 * bit 4: enable ECC when possible
610 * pix_align = pix alignment:
614 static int tvp5150_set_vbi(struct v4l2_subdev *sd,
615 const struct i2c_vbi_ram_value *regs,
616 unsigned int type,u8 flags, int line,
619 struct tvp5150 *decoder = to_tvp5150(sd);
620 v4l2_std_id std = decoder->norm;
624 if (std == V4L2_STD_ALL) {
625 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
627 } else if (std & V4L2_STD_625_50) {
628 /* Don't follow NTSC Line number convension */
635 while (regs->reg != (u16)-1 ) {
636 if ((type & regs->type.vbi_type) &&
637 (line>=regs->type.ini_line) &&
638 (line<=regs->type.end_line)) {
639 type=regs->type.vbi_type;
646 if (regs->reg == (u16)-1)
649 type=pos | (flags & 0xf0);
650 reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
653 tvp5150_write(sd, reg, type);
657 tvp5150_write(sd, reg+1, type);
663 static int tvp5150_get_vbi(struct v4l2_subdev *sd,
664 const struct i2c_vbi_ram_value *regs, int line)
666 struct tvp5150 *decoder = to_tvp5150(sd);
667 v4l2_std_id std = decoder->norm;
671 if (std == V4L2_STD_ALL) {
672 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
674 } else if (std & V4L2_STD_625_50) {
675 /* Don't follow NTSC Line number convension */
679 if (line < 6 || line > 27)
682 reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
684 pos = tvp5150_read(sd, reg) & 0x0f;
686 type = regs[pos].type.vbi_type;
688 pos = tvp5150_read(sd, reg + 1) & 0x0f;
690 type |= regs[pos].type.vbi_type;
695 static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
697 struct tvp5150 *decoder = to_tvp5150(sd);
702 /* First tests should be against specific std */
704 if (std == V4L2_STD_ALL) {
705 fmt = 0; /* Autodetect mode */
706 } else if (std & V4L2_STD_NTSC_443) {
708 } else if (std & V4L2_STD_PAL_M) {
710 } else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
713 /* Then, test against generic ones */
714 if (std & V4L2_STD_NTSC)
716 else if (std & V4L2_STD_PAL)
718 else if (std & V4L2_STD_SECAM)
722 v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
723 tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
727 static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
729 struct tvp5150 *decoder = to_tvp5150(sd);
731 if (decoder->norm == std)
734 return tvp5150_set_std(sd, std);
737 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
739 struct tvp5150 *decoder = to_tvp5150(sd);
741 /* Initializes TVP5150 to its default values */
742 tvp5150_write_inittab(sd, tvp5150_init_default);
744 /* Initializes VDP registers */
745 tvp5150_vdp_init(sd, vbi_ram_default);
747 /* Selects decoder input */
750 /* Initializes TVP5150 to stream enabled values */
751 tvp5150_write_inittab(sd, tvp5150_init_enable);
753 /* Initialize image preferences */
754 v4l2_ctrl_handler_setup(&decoder->hdl);
756 tvp5150_set_std(sd, decoder->norm);
760 static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
762 struct v4l2_subdev *sd = to_sd(ctrl);
765 case V4L2_CID_BRIGHTNESS:
766 tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
768 case V4L2_CID_CONTRAST:
769 tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
771 case V4L2_CID_SATURATION:
772 tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
775 tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
781 /****************************************************************************
783 ****************************************************************************/
785 static int tvp5150_s_routing(struct v4l2_subdev *sd,
786 u32 input, u32 output, u32 config)
788 struct tvp5150 *decoder = to_tvp5150(sd);
790 decoder->input = input;
791 decoder->output = output;
796 static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
798 /* this is for capturing 36 raw vbi lines
799 if there's a way to cut off the beginning 2 vbi lines
800 with the tvp5150 then the vbi line count could be lowered
801 to 17 lines/field again, although I couldn't find a register
802 which could do that cropping */
803 if (fmt->sample_format == V4L2_PIX_FMT_GREY)
804 tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
805 if (fmt->count[0] == 18 && fmt->count[1] == 18) {
806 tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
807 tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
812 static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
816 if (svbi->service_set != 0) {
817 for (i = 0; i <= 23; i++) {
818 svbi->service_lines[1][i] = 0;
819 svbi->service_lines[0][i] =
820 tvp5150_set_vbi(sd, vbi_ram_default,
821 svbi->service_lines[0][i], 0xf0, i, 3);
824 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
827 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
829 /* Disable Full Field */
830 tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
832 /* Disable Line modes */
833 for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
834 tvp5150_write(sd, i, 0xff);
839 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
843 memset(svbi, 0, sizeof(*svbi));
845 for (i = 0; i <= 23; i++) {
846 svbi->service_lines[0][i] =
847 tvp5150_get_vbi(sd, vbi_ram_default, i);
848 mask |= svbi->service_lines[0][i];
850 svbi->service_set = mask;
854 static int tvp5150_g_chip_ident(struct v4l2_subdev *sd,
855 struct v4l2_dbg_chip_ident *chip)
858 struct i2c_client *client = v4l2_get_subdevdata(sd);
860 rev = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER) << 8 |
861 tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
863 return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP5150,
868 #ifdef CONFIG_VIDEO_ADV_DEBUG
869 static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
871 struct i2c_client *client = v4l2_get_subdevdata(sd);
873 if (!v4l2_chip_match_i2c_client(client, ®->match))
875 if (!capable(CAP_SYS_ADMIN))
877 reg->val = tvp5150_read(sd, reg->reg & 0xff);
882 static int tvp5150_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
884 struct i2c_client *client = v4l2_get_subdevdata(sd);
886 if (!v4l2_chip_match_i2c_client(client, ®->match))
888 if (!capable(CAP_SYS_ADMIN))
890 tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
895 static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
897 int status = tvp5150_read(sd, 0x88);
899 vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
903 /* ----------------------------------------------------------------------- */
905 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
906 .s_ctrl = tvp5150_s_ctrl,
909 static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
910 .log_status = tvp5150_log_status,
911 .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
912 .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
913 .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
914 .g_ctrl = v4l2_subdev_g_ctrl,
915 .s_ctrl = v4l2_subdev_s_ctrl,
916 .queryctrl = v4l2_subdev_queryctrl,
917 .querymenu = v4l2_subdev_querymenu,
918 .s_std = tvp5150_s_std,
919 .reset = tvp5150_reset,
920 .g_chip_ident = tvp5150_g_chip_ident,
921 #ifdef CONFIG_VIDEO_ADV_DEBUG
922 .g_register = tvp5150_g_register,
923 .s_register = tvp5150_s_register,
927 static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
928 .g_tuner = tvp5150_g_tuner,
931 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
932 .s_routing = tvp5150_s_routing,
935 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
936 .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
937 .g_sliced_fmt = tvp5150_g_sliced_fmt,
938 .s_sliced_fmt = tvp5150_s_sliced_fmt,
939 .s_raw_fmt = tvp5150_s_raw_fmt,
942 static const struct v4l2_subdev_ops tvp5150_ops = {
943 .core = &tvp5150_core_ops,
944 .tuner = &tvp5150_tuner_ops,
945 .video = &tvp5150_video_ops,
946 .vbi = &tvp5150_vbi_ops,
950 /****************************************************************************
952 ****************************************************************************/
954 static int tvp5150_probe(struct i2c_client *c,
955 const struct i2c_device_id *id)
957 struct tvp5150 *core;
958 struct v4l2_subdev *sd;
959 u8 msb_id, lsb_id, msb_rom, lsb_rom;
961 /* Check if the adapter supports the needed features */
962 if (!i2c_check_functionality(c->adapter,
963 I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
966 core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
971 v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
972 v4l_info(c, "chip found @ 0x%02x (%s)\n",
973 c->addr << 1, c->adapter->name);
975 msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID);
976 lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID);
977 msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER);
978 lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
980 if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */
981 v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id);
983 /* ITU-T BT.656.4 timing */
984 tvp5150_write(sd, TVP5150_REV_SELECT, 0);
986 if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */
987 v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id);
989 v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
991 v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom);
995 core->norm = V4L2_STD_ALL; /* Default is autodetect */
996 core->input = TVP5150_COMPOSITE1;
999 v4l2_ctrl_handler_init(&core->hdl, 4);
1000 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1001 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1002 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1003 V4L2_CID_CONTRAST, 0, 255, 1, 128);
1004 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1005 V4L2_CID_SATURATION, 0, 255, 1, 128);
1006 v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1007 V4L2_CID_HUE, -128, 127, 1, 0);
1008 sd->ctrl_handler = &core->hdl;
1009 if (core->hdl.error) {
1010 int err = core->hdl.error;
1012 v4l2_ctrl_handler_free(&core->hdl);
1016 v4l2_ctrl_handler_setup(&core->hdl);
1019 tvp5150_log_status(sd);
1023 static int tvp5150_remove(struct i2c_client *c)
1025 struct v4l2_subdev *sd = i2c_get_clientdata(c);
1026 struct tvp5150 *decoder = to_tvp5150(sd);
1028 v4l2_dbg(1, debug, sd,
1029 "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1032 v4l2_device_unregister_subdev(sd);
1033 v4l2_ctrl_handler_free(&decoder->hdl);
1034 kfree(to_tvp5150(sd));
1038 /* ----------------------------------------------------------------------- */
1040 static const struct i2c_device_id tvp5150_id[] = {
1044 MODULE_DEVICE_TABLE(i2c, tvp5150_id);
1046 static struct i2c_driver tvp5150_driver = {
1048 .owner = THIS_MODULE,
1051 .probe = tvp5150_probe,
1052 .remove = tvp5150_remove,
1053 .id_table = tvp5150_id,
1056 static __init int init_tvp5150(void)
1058 return i2c_add_driver(&tvp5150_driver);
1061 static __exit void exit_tvp5150(void)
1063 i2c_del_driver(&tvp5150_driver);
1066 module_init(init_tvp5150);
1067 module_exit(exit_tvp5150);