drivers/message/fusion/mptsas.c

   1 /*
   2  *  linux/drivers/message/fusion/mptsas.c
   3  *      For use with LSI Logic PCI chip/adapter(s)
   4  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
   5  *
   6  *  Copyright (c) 1999-2005 LSI Logic Corporation
   7  *  (mailto:mpt_linux_developer@lsil.com)
   8  *  Copyright (c) 2005 Dell
   9  */
  10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  11 /*
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; version 2 of the License.
  15
  16     This program is distributed in the hope that it will be useful,
  17     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19     GNU General Public License for more details.
  20
  21     NO WARRANTY
  22     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  23     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  24     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  25     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  26     solely responsible for determining the appropriateness of using and
  27     distributing the Program and assumes all risks associated with its
  28     exercise of rights under this Agreement, including but not limited to
  29     the risks and costs of program errors, damage to or loss of data,
  30     programs or equipment, and unavailability or interruption of operations.
  31
  32     DISCLAIMER OF LIABILITY
  33     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  34     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  35     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  36     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  37     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  38     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  39     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  40
  41     You should have received a copy of the GNU General Public License
  42     along with this program; if not, write to the Free Software
  43     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  44 */
  45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  46
  47 #include <linux/module.h>
  48 #include <linux/kernel.h>
  49 #include <linux/init.h>
  50 #include <linux/errno.h>
  51 #include <linux/sched.h>
  52 #include <linux/workqueue.h>
  53
  54 #include <scsi/scsi_cmnd.h>
  55 #include <scsi/scsi_device.h>
  56 #include <scsi/scsi_host.h>
  57 #include <scsi/scsi_transport_sas.h>
  58
  59 #include "mptbase.h"
  60 #include "mptscsih.h"
  61
  62
  63 #define my_NAME         "Fusion MPT SAS Host driver"
  64 #define my_VERSION      MPT_LINUX_VERSION_COMMON
  65 #define MYNAM           "mptsas"
  66
  67 MODULE_AUTHOR(MODULEAUTHOR);
  68 MODULE_DESCRIPTION(my_NAME);
  69 MODULE_LICENSE("GPL");
  70
  71 static int mpt_pq_filter;
  72 module_param(mpt_pq_filter, int, 0);
  73 MODULE_PARM_DESC(mpt_pq_filter,
  74                 "Enable peripheral qualifier filter: enable=1  "
  75                 "(default=0)");
  76
  77 static int mpt_pt_clear;
  78 module_param(mpt_pt_clear, int, 0);
  79 MODULE_PARM_DESC(mpt_pt_clear,
  80                 "Clear persistency table: enable=1  "
  81                 "(default=MPTSCSIH_PT_CLEAR=0)");
  82
  83 static int      mptsasDoneCtx = -1;
  84 static int      mptsasTaskCtx = -1;
  85 static int      mptsasInternalCtx = -1; /* Used only for internal commands */
  86 static int      mptsasMgmtCtx = -1;
  87
  88
  89 /*
  90  * SAS topology structures
  91  *
  92  * The MPT Fusion firmware interface spreads information about the
  93  * SAS topology over many manufacture pages, thus we need some data
  94  * structure to collect it and process it for the SAS transport class.
  95  */
  96
  97 struct mptsas_devinfo {
  98         u16     handle;         /* unique id to address this device */
  99         u8      phy_id;         /* phy number of parent device */
 100         u8      port_id;        /* sas physical port this device
 101                                    is assoc'd with */
 102         u8      target;         /* logical target id of this device */
 103         u8      bus;            /* logical bus number of this device */
 104         u64     sas_address;    /* WWN of this device,
 105                                    SATA is assigned by HBA,expander */
 106         u32     device_info;    /* bitfield detailed info about this device */
 107 };
 108
 109 struct mptsas_phyinfo {
 110         u8      phy_id;                 /* phy index */
 111         u8      port_id;                /* port number this phy is part of */
 112         u8      negotiated_link_rate;   /* nego'd link rate for this phy */
 113         u8      hw_link_rate;           /* hardware max/min phys link rate */
 114         u8      programmed_link_rate;   /* programmed max/min phy link rate */
 115         struct mptsas_devinfo identify; /* point to phy device info */
 116         struct mptsas_devinfo attached; /* point to attached device info */
 117         struct sas_rphy *rphy;
 118 };
 119
 120 struct mptsas_portinfo {
 121         struct list_head list;
 122         u16             handle;         /* unique id to address this */
 123         u8              num_phys;       /* number of phys */
 124         struct mptsas_phyinfo *phy_info;
 125 };
 126
 127
 128 #ifdef SASDEBUG
 129 static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
 130 {
 131         printk("---- IO UNIT PAGE 0 ------------\n");
 132         printk("Handle=0x%X\n",
 133                 le16_to_cpu(phy_data->AttachedDeviceHandle));
 134         printk("Controller Handle=0x%X\n",
 135                 le16_to_cpu(phy_data->ControllerDevHandle));
 136         printk("Port=0x%X\n", phy_data->Port);
 137         printk("Port Flags=0x%X\n", phy_data->PortFlags);
 138         printk("PHY Flags=0x%X\n", phy_data->PhyFlags);
 139         printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate);
 140         printk("Controller PHY Device Info=0x%X\n",
 141                 le32_to_cpu(phy_data->ControllerPhyDeviceInfo));
 142         printk("DiscoveryStatus=0x%X\n",
 143                 le32_to_cpu(phy_data->DiscoveryStatus));
 144         printk("\n");
 145 }
 146
 147 static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0)
 148 {
 149         __le64 sas_address;
 150
 151         memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
 152
 153         printk("---- SAS PHY PAGE 0 ------------\n");
 154         printk("Attached Device Handle=0x%X\n",
 155                         le16_to_cpu(pg0->AttachedDevHandle));
 156         printk("SAS Address=0x%llX\n",
 157                         (unsigned long long)le64_to_cpu(sas_address));
 158         printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier);
 159         printk("Attached Device Info=0x%X\n",
 160                         le32_to_cpu(pg0->AttachedDeviceInfo));
 161         printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate);
 162         printk("Change Count=0x%X\n", pg0->ChangeCount);
 163         printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo));
 164         printk("\n");
 165 }
 166
 167 static void mptsas_print_phy_pg1(SasPhyPage1_t *pg1)
 168 {
 169         printk("---- SAS PHY PAGE 1 ------------\n");
 170         printk("Invalid Dword Count=0x%x\n", pg1->InvalidDwordCount);
 171         printk("Running Disparity Error Count=0x%x\n",
 172                         pg1->RunningDisparityErrorCount);
 173         printk("Loss Dword Synch Count=0x%x\n", pg1->LossDwordSynchCount);
 174         printk("PHY Reset Problem Count=0x%x\n", pg1->PhyResetProblemCount);
 175         printk("\n");
 176 }
 177
 178 static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
 179 {
 180         __le64 sas_address;
 181
 182         memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
 183
 184         printk("---- SAS DEVICE PAGE 0 ---------\n");
 185         printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle));
 186         printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
 187         printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
 188         printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
 189         printk("Target ID=0x%X\n", pg0->TargetID);
 190         printk("Bus=0x%X\n", pg0->Bus);
 191         /* The PhyNum field specifies the PHY number of the parent
 192          * device this device is linked to
 193          */
 194         printk("Parent Phy Num=0x%X\n", pg0->PhyNum);
 195         printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus));
 196         printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
 197         printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
 198         printk("Physical Port=0x%X\n", pg0->PhysicalPort);
 199         printk("\n");
 200 }
 201
 202 static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
 203 {
 204         printk("---- SAS EXPANDER PAGE 1 ------------\n");
 205
 206         printk("Physical Port=0x%X\n", pg1->PhysicalPort);
 207         printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier);
 208         printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
 209         printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
 210         printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
 211         printk("Owner Device Handle=0x%X\n",
 212                         le16_to_cpu(pg1->OwnerDevHandle));
 213         printk("Attached Device Handle=0x%X\n",
 214                         le16_to_cpu(pg1->AttachedDevHandle));
 215 }
 216 #else
 217 #define mptsas_print_phy_data(phy_data)         do { } while (0)
 218 #define mptsas_print_phy_pg0(pg0)               do { } while (0)
 219 #define mptsas_print_phy_pg1(pg1)               do { } while (0)
 220 #define mptsas_print_device_pg0(pg0)            do { } while (0)
 221 #define mptsas_print_expander_pg1(pg1)          do { } while (0)
 222 #endif
 223
 224
 225 /*
 226  * This is pretty ugly.  We will be able to seriously clean it up
 227  * once the DV code in mptscsih goes away and we can properly
 228  * implement ->target_alloc.
 229  */
 230 static int
 231 mptsas_slave_alloc(struct scsi_device *device)
 232 {
 233         struct Scsi_Host        *host = device->host;
 234         MPT_SCSI_HOST           *hd = (MPT_SCSI_HOST *)host->hostdata;
 235         struct sas_rphy         *rphy;
 236         struct mptsas_portinfo  *p;
 237         VirtDevice              *vdev;
 238         uint                    target = device->id;
 239         int i;
 240
 241         if ((vdev = hd->Targets[target]) != NULL)
 242                 goto out;
 243
 244         vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL);
 245         if (!vdev) {
 246                 printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
 247                                 hd->ioc->name, sizeof(VirtDevice));
 248                 return -ENOMEM;
 249         }
 250
 251         memset(vdev, 0, sizeof(VirtDevice));
 252         vdev->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY;
 253         vdev->ioc_id = hd->ioc->id;
 254
 255         rphy = dev_to_rphy(device->sdev_target->dev.parent);
 256         list_for_each_entry(p, &hd->ioc->sas_topology, list) {
 257                 for (i = 0; i < p->num_phys; i++) {
 258                         if (p->phy_info[i].attached.sas_address ==
 259                                         rphy->identify.sas_address) {
 260                                 vdev->target_id =
 261                                         p->phy_info[i].attached.target;
 262                                 vdev->bus_id = p->phy_info[i].attached.bus;
 263                                 hd->Targets[device->id] = vdev;
 264                                 goto out;
 265                         }
 266                 }
 267         }
 268
 269         printk("No matching SAS device found!!\n");
 270         kfree(vdev);
 271         return -ENODEV;
 272
 273  out:
 274         vdev->num_luns++;
 275         device->hostdata = vdev;
 276         return 0;
 277 }
 278
 279 static struct scsi_host_template mptsas_driver_template = {
 280         .module                         = THIS_MODULE,
 281         .proc_name                      = "mptsas",
 282         .proc_info                      = mptscsih_proc_info,
 283         .name                           = "MPT SPI Host",
 284         .info                           = mptscsih_info,
 285         .queuecommand                   = mptscsih_qcmd,
 286         .slave_alloc                    = mptsas_slave_alloc,
 287         .slave_configure                = mptscsih_slave_configure,
 288         .slave_destroy                  = mptscsih_slave_destroy,
 289         .change_queue_depth             = mptscsih_change_queue_depth,
 290         .eh_abort_handler               = mptscsih_abort,
 291         .eh_device_reset_handler        = mptscsih_dev_reset,
 292         .eh_bus_reset_handler           = mptscsih_bus_reset,
 293         .eh_host_reset_handler          = mptscsih_host_reset,
 294         .bios_param                     = mptscsih_bios_param,
 295         .can_queue                      = MPT_FC_CAN_QUEUE,
 296         .this_id                        = -1,
 297         .sg_tablesize                   = MPT_SCSI_SG_DEPTH,
 298         .max_sectors                    = 8192,
 299         .cmd_per_lun                    = 7,
 300         .use_clustering                 = ENABLE_CLUSTERING,
 301 };
 302
 303 static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
 304 {
 305         struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
 306         return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
 307 }
 308
 309 static int mptsas_get_linkerrors(struct sas_phy *phy)
 310 {
 311         MPT_ADAPTER *ioc = phy_to_ioc(phy);
 312         ConfigExtendedPageHeader_t hdr;
 313         CONFIGPARMS cfg;
 314         SasPhyPage1_t *buffer;
 315         dma_addr_t dma_handle;
 316         int error;
 317
 318         hdr.PageVersion = MPI_SASPHY1_PAGEVERSION;
 319         hdr.ExtPageLength = 0;
 320         hdr.PageNumber = 1 /* page number 1*/;
 321         hdr.Reserved1 = 0;
 322         hdr.Reserved2 = 0;
 323         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 324         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY;
 325
 326         cfg.cfghdr.ehdr = &hdr;
 327         cfg.physAddr = -1;
 328         cfg.pageAddr = phy->identify.phy_identifier;
 329         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 330         cfg.dir = 0;    /* read */
 331         cfg.timeout = 10;
 332
 333         error = mpt_config(ioc, &cfg);
 334         if (error)
 335                 return error;
 336         if (!hdr.ExtPageLength)
 337                 return -ENXIO;
 338
 339         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 340                                       &dma_handle);
 341         if (!buffer)
 342                 return -ENOMEM;
 343
 344         cfg.physAddr = dma_handle;
 345         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 346
 347         error = mpt_config(ioc, &cfg);
 348         if (error)
 349                 goto out_free_consistent;
 350
 351         mptsas_print_phy_pg1(buffer);
 352
 353         phy->invalid_dword_count = le32_to_cpu(buffer->InvalidDwordCount);
 354         phy->running_disparity_error_count =
 355                 le32_to_cpu(buffer->RunningDisparityErrorCount);
 356         phy->loss_of_dword_sync_count =
 357                 le32_to_cpu(buffer->LossDwordSynchCount);
 358         phy->phy_reset_problem_count =
 359                 le32_to_cpu(buffer->PhyResetProblemCount);
 360
 361  out_free_consistent:
 362         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 363                             buffer, dma_handle);
 364         return error;
 365 }
 366
 367 static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
 368                 MPT_FRAME_HDR *reply)
 369 {
 370         ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_COMMAND_GOOD;
 371         if (reply != NULL) {
 372                 ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_RF_VALID;
 373                 memcpy(ioc->sas_mgmt.reply, reply,
 374                     min(ioc->reply_sz, 4 * reply->u.reply.MsgLength));
 375         }
 376         complete(&ioc->sas_mgmt.done);
 377         return 1;
 378 }
 379
 380 static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
 381 {
 382         MPT_ADAPTER *ioc = phy_to_ioc(phy);
 383         SasIoUnitControlRequest_t *req;
 384         SasIoUnitControlReply_t *reply;
 385         MPT_FRAME_HDR *mf;
 386         MPIHeader_t *hdr;
 387         unsigned long timeleft;
 388         int error = -ERESTARTSYS;
 389
 390         /* not implemented for expanders */
 391         if (phy->identify.target_port_protocols & SAS_PROTOCOL_SMP)
 392                 return -ENXIO;
 393
 394         if (down_interruptible(&ioc->sas_mgmt.mutex))
 395                 goto out;
 396
 397         mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc);
 398         if (!mf) {
 399                 error = -ENOMEM;
 400                 goto out_unlock;
 401         }
 402
 403         hdr = (MPIHeader_t *) mf;
 404         req = (SasIoUnitControlRequest_t *)mf;
 405         memset(req, 0, sizeof(SasIoUnitControlRequest_t));
 406         req->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
 407         req->MsgContext = hdr->MsgContext;
 408         req->Operation = hard_reset ?
 409                 MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET;
 410         req->PhyNum = phy->identify.phy_identifier;
 411
 412         mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
 413
 414         timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done,
 415                         10 * HZ);
 416         if (!timeleft) {
 417                 /* On timeout reset the board */
 418                 mpt_free_msg_frame(ioc, mf);
 419                 mpt_HardResetHandler(ioc, CAN_SLEEP);
 420                 error = -ETIMEDOUT;
 421                 goto out_unlock;
 422         }
 423
 424         /* a reply frame is expected */
 425         if ((ioc->sas_mgmt.status &
 426             MPT_IOCTL_STATUS_RF_VALID) == 0) {
 427                 error = -ENXIO;
 428                 goto out_unlock;
 429         }
 430
 431         /* process the completed Reply Message Frame */
 432         reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply;
 433         if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) {
 434                 printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
 435                     __FUNCTION__,
 436                     reply->IOCStatus,
 437                     reply->IOCLogInfo);
 438                 error = -ENXIO;
 439                 goto out_unlock;
 440         }
 441
 442         error = 0;
 443
 444  out_unlock:
 445         up(&ioc->sas_mgmt.mutex);
 446  out:
 447         return error;
 448 }
 449
 450 static struct sas_function_template mptsas_transport_functions = {
 451         .get_linkerrors         = mptsas_get_linkerrors,
 452         .phy_reset              = mptsas_phy_reset,
 453 };
 454
 455 static struct scsi_transport_template *mptsas_transport_template;
 456
 457 static int
 458 mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 459 {
 460         ConfigExtendedPageHeader_t hdr;
 461         CONFIGPARMS cfg;
 462         SasIOUnitPage0_t *buffer;
 463         dma_addr_t dma_handle;
 464         int error, i;
 465
 466         hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
 467         hdr.ExtPageLength = 0;
 468         hdr.PageNumber = 0;
 469         hdr.Reserved1 = 0;
 470         hdr.Reserved2 = 0;
 471         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 472         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
 473
 474         cfg.cfghdr.ehdr = &hdr;
 475         cfg.physAddr = -1;
 476         cfg.pageAddr = 0;
 477         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 478         cfg.dir = 0;    /* read */
 479         cfg.timeout = 10;
 480
 481         error = mpt_config(ioc, &cfg);
 482         if (error)
 483                 goto out;
 484         if (!hdr.ExtPageLength) {
 485                 error = -ENXIO;
 486                 goto out;
 487         }
 488
 489         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 490                                             &dma_handle);
 491         if (!buffer) {
 492                 error = -ENOMEM;
 493                 goto out;
 494         }
 495
 496         cfg.physAddr = dma_handle;
 497         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 498
 499         error = mpt_config(ioc, &cfg);
 500         if (error)
 501                 goto out_free_consistent;
 502
 503         port_info->num_phys = buffer->NumPhys;
 504         port_info->phy_info = kcalloc(port_info->num_phys,
 505                 sizeof(struct mptsas_phyinfo),GFP_KERNEL);
 506         if (!port_info->phy_info) {
 507                 error = -ENOMEM;
 508                 goto out_free_consistent;
 509         }
 510
 511         for (i = 0; i < port_info->num_phys; i++) {
 512                 mptsas_print_phy_data(&buffer->PhyData[i]);
 513                 port_info->phy_info[i].phy_id = i;
 514                 port_info->phy_info[i].port_id =
 515                     buffer->PhyData[i].Port;
 516                 port_info->phy_info[i].negotiated_link_rate =
 517                     buffer->PhyData[i].NegotiatedLinkRate;
 518         }
 519
 520  out_free_consistent:
 521         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 522                             buffer, dma_handle);
 523  out:
 524         return error;
 525 }
 526
 527 static int
 528 mptsas_sas_phy_pg0(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 529                 u32 form, u32 form_specific)
 530 {
 531         ConfigExtendedPageHeader_t hdr;
 532         CONFIGPARMS cfg;
 533         SasPhyPage0_t *buffer;
 534         dma_addr_t dma_handle;
 535         int error;
 536
 537         hdr.PageVersion = MPI_SASPHY0_PAGEVERSION;
 538         hdr.ExtPageLength = 0;
 539         hdr.PageNumber = 0;
 540         hdr.Reserved1 = 0;
 541         hdr.Reserved2 = 0;
 542         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 543         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY;
 544
 545         cfg.cfghdr.ehdr = &hdr;
 546         cfg.dir = 0;    /* read */
 547         cfg.timeout = 10;
 548
 549         /* Get Phy Pg 0 for each Phy. */
 550         cfg.physAddr = -1;
 551         cfg.pageAddr = form + form_specific;
 552         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 553
 554         error = mpt_config(ioc, &cfg);
 555         if (error)
 556                 goto out;
 557
 558         if (!hdr.ExtPageLength) {
 559                 error = -ENXIO;
 560                 goto out;
 561         }
 562
 563         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 564                                       &dma_handle);
 565         if (!buffer) {
 566                 error = -ENOMEM;
 567                 goto out;
 568         }
 569
 570         cfg.physAddr = dma_handle;
 571         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 572
 573         error = mpt_config(ioc, &cfg);
 574         if (error)
 575                 goto out_free_consistent;
 576
 577         mptsas_print_phy_pg0(buffer);
 578
 579         phy_info->hw_link_rate = buffer->HwLinkRate;
 580         phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
 581         phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle);
 582         phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle);
 583
 584  out_free_consistent:
 585         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 586                             buffer, dma_handle);
 587  out:
 588         return error;
 589 }
 590
 591 static int
 592 mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
 593                 u32 form, u32 form_specific)
 594 {
 595         ConfigExtendedPageHeader_t hdr;
 596         CONFIGPARMS cfg;
 597         SasDevicePage0_t *buffer;
 598         dma_addr_t dma_handle;
 599         __le64 sas_address;
 600         int error;
 601
 602         hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
 603         hdr.ExtPageLength = 0;
 604         hdr.PageNumber = 0;
 605         hdr.Reserved1 = 0;
 606         hdr.Reserved2 = 0;
 607         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 608         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE;
 609
 610         cfg.cfghdr.ehdr = &hdr;
 611         cfg.pageAddr = form + form_specific;
 612         cfg.physAddr = -1;
 613         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 614         cfg.dir = 0;    /* read */
 615         cfg.timeout = 10;
 616
 617         error = mpt_config(ioc, &cfg);
 618         if (error)
 619                 goto out;
 620         if (!hdr.ExtPageLength) {
 621                 error = -ENXIO;
 622                 goto out;
 623         }
 624
 625         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 626                                       &dma_handle);
 627         if (!buffer) {
 628                 error = -ENOMEM;
 629                 goto out;
 630         }
 631
 632         cfg.physAddr = dma_handle;
 633         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 634
 635         error = mpt_config(ioc, &cfg);
 636         if (error)
 637                 goto out_free_consistent;
 638
 639         mptsas_print_device_pg0(buffer);
 640
 641         device_info->handle = le16_to_cpu(buffer->DevHandle);
 642         device_info->phy_id = buffer->PhyNum;
 643         device_info->port_id = buffer->PhysicalPort;
 644         device_info->target = buffer->TargetID;
 645         device_info->bus = buffer->Bus;
 646         memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64));
 647         device_info->sas_address = le64_to_cpu(sas_address);
 648         device_info->device_info =
 649             le32_to_cpu(buffer->DeviceInfo);
 650
 651  out_free_consistent:
 652         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 653                             buffer, dma_handle);
 654  out:
 655         return error;
 656 }
 657
 658 static int
 659 mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
 660                 u32 form, u32 form_specific)
 661 {
 662         ConfigExtendedPageHeader_t hdr;
 663         CONFIGPARMS cfg;
 664         SasExpanderPage0_t *buffer;
 665         dma_addr_t dma_handle;
 666         int error;
 667
 668         hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
 669         hdr.ExtPageLength = 0;
 670         hdr.PageNumber = 0;
 671         hdr.Reserved1 = 0;
 672         hdr.Reserved2 = 0;
 673         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 674         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
 675
 676         cfg.cfghdr.ehdr = &hdr;
 677         cfg.physAddr = -1;
 678         cfg.pageAddr = form + form_specific;
 679         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 680         cfg.dir = 0;    /* read */
 681         cfg.timeout = 10;
 682
 683         error = mpt_config(ioc, &cfg);
 684         if (error)
 685                 goto out;
 686
 687         if (!hdr.ExtPageLength) {
 688                 error = -ENXIO;
 689                 goto out;
 690         }
 691
 692         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 693                                       &dma_handle);
 694         if (!buffer) {
 695                 error = -ENOMEM;
 696                 goto out;
 697         }
 698
 699         cfg.physAddr = dma_handle;
 700         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 701
 702         error = mpt_config(ioc, &cfg);
 703         if (error)
 704                 goto out_free_consistent;
 705
 706         /* save config data */
 707         port_info->num_phys = buffer->NumPhys;
 708         port_info->handle = le16_to_cpu(buffer->DevHandle);
 709         port_info->phy_info = kcalloc(port_info->num_phys,
 710                 sizeof(struct mptsas_phyinfo),GFP_KERNEL);
 711         if (!port_info->phy_info) {
 712                 error = -ENOMEM;
 713                 goto out_free_consistent;
 714         }
 715
 716  out_free_consistent:
 717         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 718                             buffer, dma_handle);
 719  out:
 720         return error;
 721 }
 722
 723 static int
 724 mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 725                 u32 form, u32 form_specific)
 726 {
 727         ConfigExtendedPageHeader_t hdr;
 728         CONFIGPARMS cfg;
 729         SasExpanderPage1_t *buffer;
 730         dma_addr_t dma_handle;
 731         int error;
 732
 733         hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
 734         hdr.ExtPageLength = 0;
 735         hdr.PageNumber = 1;
 736         hdr.Reserved1 = 0;
 737         hdr.Reserved2 = 0;
 738         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 739         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
 740
 741         cfg.cfghdr.ehdr = &hdr;
 742         cfg.physAddr = -1;
 743         cfg.pageAddr = form + form_specific;
 744         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 745         cfg.dir = 0;    /* read */
 746         cfg.timeout = 10;
 747
 748         error = mpt_config(ioc, &cfg);
 749         if (error)
 750                 goto out;
 751
 752         if (!hdr.ExtPageLength) {
 753                 error = -ENXIO;
 754                 goto out;
 755         }
 756
 757         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 758                                       &dma_handle);
 759         if (!buffer) {
 760                 error = -ENOMEM;
 761                 goto out;
 762         }
 763
 764         cfg.physAddr = dma_handle;
 765         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 766
 767         error = mpt_config(ioc, &cfg);
 768         if (error)
 769                 goto out_free_consistent;
 770
 771
 772         mptsas_print_expander_pg1(buffer);
 773
 774         /* save config data */
 775         phy_info->phy_id = buffer->PhyIdentifier;
 776         phy_info->port_id = buffer->PhysicalPort;
 777         phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
 778         phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
 779         phy_info->hw_link_rate = buffer->HwLinkRate;
 780         phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle);
 781         phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle);
 782
 783
 784  out_free_consistent:
 785         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
 786                             buffer, dma_handle);
 787  out:
 788         return error;
 789 }
 790
 791 static void
 792 mptsas_parse_device_info(struct sas_identify *identify,
 793                 struct mptsas_devinfo *device_info)
 794 {
 795         u16 protocols;
 796
 797         identify->sas_address = device_info->sas_address;
 798         identify->phy_identifier = device_info->phy_id;
 799
 800         /*
 801          * Fill in Phy Initiator Port Protocol.
 802          * Bits 6:3, more than one bit can be set, fall through cases.
 803          */
 804         protocols = device_info->device_info & 0x78;
 805         identify->initiator_port_protocols = 0;
 806         if (protocols & MPI_SAS_DEVICE_INFO_SSP_INITIATOR)
 807                 identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
 808         if (protocols & MPI_SAS_DEVICE_INFO_STP_INITIATOR)
 809                 identify->initiator_port_protocols |= SAS_PROTOCOL_STP;
 810         if (protocols & MPI_SAS_DEVICE_INFO_SMP_INITIATOR)
 811                 identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
 812         if (protocols & MPI_SAS_DEVICE_INFO_SATA_HOST)
 813                 identify->initiator_port_protocols |= SAS_PROTOCOL_SATA;
 814
 815         /*
 816          * Fill in Phy Target Port Protocol.
 817          * Bits 10:7, more than one bit can be set, fall through cases.
 818          */
 819         protocols = device_info->device_info & 0x780;
 820         identify->target_port_protocols = 0;
 821         if (protocols & MPI_SAS_DEVICE_INFO_SSP_TARGET)
 822                 identify->target_port_protocols |= SAS_PROTOCOL_SSP;
 823         if (protocols & MPI_SAS_DEVICE_INFO_STP_TARGET)
 824                 identify->target_port_protocols |= SAS_PROTOCOL_STP;
 825         if (protocols & MPI_SAS_DEVICE_INFO_SMP_TARGET)
 826                 identify->target_port_protocols |= SAS_PROTOCOL_SMP;
 827         if (protocols & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
 828                 identify->target_port_protocols |= SAS_PROTOCOL_SATA;
 829
 830         /*
 831          * Fill in Attached device type.
 832          */
 833         switch (device_info->device_info &
 834                         MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) {
 835         case MPI_SAS_DEVICE_INFO_NO_DEVICE:
 836                 identify->device_type = SAS_PHY_UNUSED;
 837                 break;
 838         case MPI_SAS_DEVICE_INFO_END_DEVICE:
 839                 identify->device_type = SAS_END_DEVICE;
 840                 break;
 841         case MPI_SAS_DEVICE_INFO_EDGE_EXPANDER:
 842                 identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
 843                 break;
 844         case MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER:
 845                 identify->device_type = SAS_FANOUT_EXPANDER_DEVICE;
 846                 break;
 847         }
 848 }
 849
 850 static int mptsas_probe_one_phy(struct device *dev,
 851                 struct mptsas_phyinfo *phy_info, int index, int local)
 852 {
 853         struct sas_phy *port;
 854         int error;
 855
 856         port = sas_phy_alloc(dev, index);
 857         if (!port)
 858                 return -ENOMEM;
 859
 860         port->port_identifier = phy_info->port_id;
 861         mptsas_parse_device_info(&port->identify, &phy_info->identify);
 862
 863         /*
 864          * Set Negotiated link rate.
 865          */
 866         switch (phy_info->negotiated_link_rate) {
 867         case MPI_SAS_IOUNIT0_RATE_PHY_DISABLED:
 868                 port->negotiated_linkrate = SAS_PHY_DISABLED;
 869                 break;
 870         case MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION:
 871                 port->negotiated_linkrate = SAS_LINK_RATE_FAILED;
 872                 break;
 873         case MPI_SAS_IOUNIT0_RATE_1_5:
 874                 port->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
 875                 break;
 876         case MPI_SAS_IOUNIT0_RATE_3_0:
 877                 port->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
 878                 break;
 879         case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE:
 880         case MPI_SAS_IOUNIT0_RATE_UNKNOWN:
 881         default:
 882                 port->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
 883                 break;
 884         }
 885
 886         /*
 887          * Set Max hardware link rate.
 888          */
 889         switch (phy_info->hw_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) {
 890         case MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5:
 891                 port->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
 892                 break;
 893         case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0:
 894                 port->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
 895                 break;
 896         default:
 897                 break;
 898         }
 899
 900         /*
 901          * Set Max programmed link rate.
 902          */
 903         switch (phy_info->programmed_link_rate &
 904                         MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) {
 905         case MPI_SAS_PHY0_PRATE_MAX_RATE_1_5:
 906                 port->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS;
 907                 break;
 908         case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0:
 909                 port->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
 910                 break;
 911         default:
 912                 break;
 913         }
 914
 915         /*
 916          * Set Min hardware link rate.
 917          */
 918         switch (phy_info->hw_link_rate & MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK) {
 919         case MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5:
 920                 port->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
 921                 break;
 922         case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0:
 923                 port->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
 924                 break;
 925         default:
 926                 break;
 927         }
 928
 929         /*
 930          * Set Min programmed link rate.
 931          */
 932         switch (phy_info->programmed_link_rate &
 933                         MPI_SAS_PHY0_PRATE_MIN_RATE_MASK) {
 934         case MPI_SAS_PHY0_PRATE_MIN_RATE_1_5:
 935                 port->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
 936                 break;
 937         case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0:
 938                 port->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS;
 939                 break;
 940         default:
 941                 break;
 942         }
 943
 944         if (local)
 945                 port->local_attached = 1;
 946
 947         error = sas_phy_add(port);
 948         if (error) {
 949                 sas_phy_free(port);
 950                 return error;
 951         }
 952
 953         if (phy_info->attached.handle) {
 954                 struct sas_rphy *rphy;
 955
 956                 rphy = sas_rphy_alloc(port);
 957                 if (!rphy)
 958                         return 0; /* non-fatal: an rphy can be added later */
 959
 960                 mptsas_parse_device_info(&rphy->identify, &phy_info->attached);
 961                 error = sas_rphy_add(rphy);
 962                 if (error) {
 963                         sas_rphy_free(rphy);
 964                         return error;
 965                 }
 966
 967                 phy_info->rphy = rphy;
 968         }
 969
 970         return 0;
 971 }
 972
 973 static int
 974 mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
 975 {
 976         struct mptsas_portinfo *port_info;
 977         u32 handle = 0xFFFF;
 978         int error = -ENOMEM, i;
 979
 980         port_info = kmalloc(sizeof(*port_info), GFP_KERNEL);
 981         if (!port_info)
 982                 goto out;
 983         memset(port_info, 0, sizeof(*port_info));
 984
 985         error = mptsas_sas_io_unit_pg0(ioc, port_info);
 986         if (error)
 987                 goto out_free_port_info;
 988
 989         list_add_tail(&port_info->list, &ioc->sas_topology);
 990
 991         for (i = 0; i < port_info->num_phys; i++) {
 992                 mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
 993                         (MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
 994                          MPI_SAS_PHY_PGAD_FORM_SHIFT), i);
 995
 996                 mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
 997                         (MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE <<
 998                          MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle);
 999                 port_info->phy_info[i].identify.phy_id =
1000                     port_info->phy_info[i].phy_id;
1001                 handle = port_info->phy_info[i].identify.handle;
1002
1003                 if (port_info->phy_info[i].attached.handle) {
1004                         mptsas_sas_device_pg0(ioc,
1005                                 &port_info->phy_info[i].attached,
1006                                 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
1007                                  MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
1008                                 port_info->phy_info[i].attached.handle);
1009                 }
1010
1011                 mptsas_probe_one_phy(&ioc->sh->shost_gendev,
1012                                      &port_info->phy_info[i], *index, 1);
1013                 (*index)++;
1014         }
1015
1016         return 0;
1017
1018  out_free_port_info:
1019         kfree(port_info);
1020  out:
1021         return error;
1022 }
1023
1024 static int
1025 mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
1026 {
1027         struct mptsas_portinfo *port_info, *p;
1028         int error = -ENOMEM, i, j;
1029
1030         port_info = kmalloc(sizeof(*port_info), GFP_KERNEL);
1031         if (!port_info)
1032                 goto out;
1033         memset(port_info, 0, sizeof(*port_info));
1034
1035         error = mptsas_sas_expander_pg0(ioc, port_info,
1036                 (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
1037                  MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
1038         if (error)
1039                 goto out_free_port_info;
1040
1041         *handle = port_info->handle;
1042
1043         list_add_tail(&port_info->list, &ioc->sas_topology);
1044         for (i = 0; i < port_info->num_phys; i++) {
1045                 struct device *parent;
1046
1047                 mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i],
1048                         (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
1049                          MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle);
1050
1051                 if (port_info->phy_info[i].identify.handle) {
1052                         mptsas_sas_device_pg0(ioc,
1053                                 &port_info->phy_info[i].identify,
1054                                 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
1055                                  MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
1056                                 port_info->phy_info[i].identify.handle);
1057                         port_info->phy_info[i].identify.phy_id =
1058                             port_info->phy_info[i].phy_id;
1059                 }
1060
1061                 if (port_info->phy_info[i].attached.handle) {
1062                         mptsas_sas_device_pg0(ioc,
1063                                 &port_info->phy_info[i].attached,
1064                                 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
1065                                  MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
1066                                 port_info->phy_info[i].attached.handle);
1067                 }
1068
1069                 /*
1070                  * If we find a parent port handle this expander is
1071                  * attached to another expander, else it hangs of the
1072                  * HBA phys.
1073                  */
1074                 parent = &ioc->sh->shost_gendev;
1075                 list_for_each_entry(p, &ioc->sas_topology, list) {
1076                         for (j = 0; j < p->num_phys; j++) {
1077                                 if (port_info->phy_info[i].identify.handle ==
1078                                                 p->phy_info[j].attached.handle)
1079                                         parent = &p->phy_info[j].rphy->dev;
1080                         }
1081                 }
1082
1083                 mptsas_probe_one_phy(parent, &port_info->phy_info[i],
1084                                      *index, 0);
1085                 (*index)++;
1086         }
1087
1088         return 0;
1089
1090  out_free_port_info:
1091         kfree(port_info);
1092  out:
1093         return error;
1094 }
1095
1096 static void
1097 mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
1098 {
1099         u32 handle = 0xFFFF;
1100         int index = 0;
1101
1102         mptsas_probe_hba_phys(ioc, &index);
1103         while (!mptsas_probe_expander_phys(ioc, &handle, &index))
1104                 ;
1105 }
1106
1107 static int
1108 mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
1109 {
1110         struct Scsi_Host        *sh;
1111         MPT_SCSI_HOST           *hd;
1112         MPT_ADAPTER             *ioc;
1113         unsigned long            flags;
1114         int                      sz, ii;
1115         int                      numSGE = 0;
1116         int                      scale;
1117         int                      ioc_cap;
1118         u8                      *mem;
1119         int                     error=0;
1120         int                     r;
1121
1122         r = mpt_attach(pdev,id);
1123         if (r)
1124                 return r;
1125
1126         ioc = pci_get_drvdata(pdev);
1127         ioc->DoneCtx = mptsasDoneCtx;
1128         ioc->TaskCtx = mptsasTaskCtx;
1129         ioc->InternalCtx = mptsasInternalCtx;
1130
1131         /*  Added sanity check on readiness of the MPT adapter.
1132          */
1133         if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
1134                 printk(MYIOC_s_WARN_FMT
1135                   "Skipping because it's not operational!\n",
1136                   ioc->name);
1137                 error = -ENODEV;
1138                 goto out_mptsas_probe;
1139         }
1140
1141         if (!ioc->active) {
1142                 printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
1143                   ioc->name);
1144                 error = -ENODEV;
1145                 goto out_mptsas_probe;
1146         }
1147
1148         /*  Sanity check - ensure at least 1 port is INITIATOR capable
1149          */
1150         ioc_cap = 0;
1151         for (ii = 0; ii < ioc->facts.NumberOfPorts; ii++) {
1152                 if (ioc->pfacts[ii].ProtocolFlags &
1153                                 MPI_PORTFACTS_PROTOCOL_INITIATOR)
1154                         ioc_cap++;
1155         }
1156
1157         if (!ioc_cap) {
1158                 printk(MYIOC_s_WARN_FMT
1159                         "Skipping ioc=%p because SCSI Initiator mode "
1160                         "is NOT enabled!\n", ioc->name, ioc);
1161                 return 0;
1162         }
1163
1164         sh = scsi_host_alloc(&mptsas_driver_template, sizeof(MPT_SCSI_HOST));
1165         if (!sh) {
1166                 printk(MYIOC_s_WARN_FMT
1167                         "Unable to register controller with SCSI subsystem\n",
1168                         ioc->name);
1169                 error = -1;
1170                 goto out_mptsas_probe;
1171         }
1172
1173         spin_lock_irqsave(&ioc->FreeQlock, flags);
1174
1175         /* Attach the SCSI Host to the IOC structure
1176          */
1177         ioc->sh = sh;
1178
1179         sh->io_port = 0;
1180         sh->n_io_port = 0;
1181         sh->irq = 0;
1182
1183         /* set 16 byte cdb's */
1184         sh->max_cmd_len = 16;
1185
1186         sh->max_id = ioc->pfacts->MaxDevices + 1;
1187
1188         sh->transportt = mptsas_transport_template;
1189
1190         sh->max_lun = MPT_LAST_LUN + 1;
1191         sh->max_channel = 0;
1192         sh->this_id = ioc->pfacts[0].PortSCSIID;
1193
1194         /* Required entry.
1195          */
1196         sh->unique_id = ioc->id;
1197
1198         INIT_LIST_HEAD(&ioc->sas_topology);
1199         init_MUTEX(&ioc->sas_mgmt.mutex);
1200         init_completion(&ioc->sas_mgmt.done);
1201
1202         /* Verify that we won't exceed the maximum
1203          * number of chain buffers
1204          * We can optimize:  ZZ = req_sz/sizeof(SGE)
1205          * For 32bit SGE's:
1206          *  numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
1207          *               + (req_sz - 64)/sizeof(SGE)
1208          * A slightly different algorithm is required for
1209          * 64bit SGEs.
1210          */
1211         scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
1212         if (sizeof(dma_addr_t) == sizeof(u64)) {
1213                 numSGE = (scale - 1) *
1214                   (ioc->facts.MaxChainDepth-1) + scale +
1215                   (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
1216                   sizeof(u32));
1217         } else {
1218                 numSGE = 1 + (scale - 1) *
1219                   (ioc->facts.MaxChainDepth-1) + scale +
1220                   (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
1221                   sizeof(u32));
1222         }
1223
1224         if (numSGE < sh->sg_tablesize) {
1225                 /* Reset this value */
1226                 dprintk((MYIOC_s_INFO_FMT
1227                   "Resetting sg_tablesize to %d from %d\n",
1228                   ioc->name, numSGE, sh->sg_tablesize));
1229                 sh->sg_tablesize = numSGE;
1230         }
1231
1232         spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1233
1234         hd = (MPT_SCSI_HOST *) sh->hostdata;
1235         hd->ioc = ioc;
1236
1237         /* SCSI needs scsi_cmnd lookup table!
1238          * (with size equal to req_depth*PtrSz!)
1239          */
1240         sz = ioc->req_depth * sizeof(void *);
1241         mem = kmalloc(sz, GFP_ATOMIC);
1242         if (mem == NULL) {
1243                 error = -ENOMEM;
1244                 goto out_mptsas_probe;
1245         }
1246
1247         memset(mem, 0, sz);
1248         hd->ScsiLookup = (struct scsi_cmnd **) mem;
1249
1250         dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n",
1251                  ioc->name, hd->ScsiLookup, sz));
1252
1253         /* Allocate memory for the device structures.
1254          * A non-Null pointer at an offset
1255          * indicates a device exists.
1256          * max_id = 1 + maximum id (hosts.h)
1257          */
1258         sz = sh->max_id * sizeof(void *);
1259         mem = kmalloc(sz, GFP_ATOMIC);
1260         if (mem == NULL) {
1261                 error = -ENOMEM;
1262                 goto out_mptsas_probe;
1263         }
1264
1265         memset(mem, 0, sz);
1266         hd->Targets = (VirtDevice **) mem;
1267
1268         dprintk((KERN_INFO
1269           "  Targets @ %p, sz=%d\n", hd->Targets, sz));
1270
1271         /* Clear the TM flags
1272          */
1273         hd->tmPending = 0;
1274         hd->tmState = TM_STATE_NONE;
1275         hd->resetPending = 0;
1276         hd->abortSCpnt = NULL;
1277
1278         /* Clear the pointer used to store
1279          * single-threaded commands, i.e., those
1280          * issued during a bus scan, dv and
1281          * configuration pages.
1282          */
1283         hd->cmdPtr = NULL;
1284
1285         /* Initialize this SCSI Hosts' timers
1286          * To use, set the timer expires field
1287          * and add_timer
1288          */
1289         init_timer(&hd->timer);
1290         hd->timer.data = (unsigned long) hd;
1291         hd->timer.function = mptscsih_timer_expired;
1292
1293         hd->mpt_pq_filter = mpt_pq_filter;
1294         ioc->sas_data.ptClear = mpt_pt_clear;
1295
1296         if (ioc->sas_data.ptClear==1) {
1297                 mptbase_sas_persist_operation(
1298                     ioc, MPI_SAS_OP_CLEAR_ALL_PERSISTENT);
1299         }
1300
1301         ddvprintk((MYIOC_s_INFO_FMT
1302                 "mpt_pq_filter %x mpt_pq_filter %x\n",
1303                 ioc->name,
1304                 mpt_pq_filter,
1305                 mpt_pq_filter));
1306
1307         init_waitqueue_head(&hd->scandv_waitq);
1308         hd->scandv_wait_done = 0;
1309         hd->last_queue_full = 0;
1310
1311         error = scsi_add_host(sh, &ioc->pcidev->dev);
1312         if (error) {
1313                 dprintk((KERN_ERR MYNAM
1314                   "scsi_add_host failed\n"));
1315                 goto out_mptsas_probe;
1316         }
1317
1318         mptsas_scan_sas_topology(ioc);
1319
1320         return 0;
1321
1322 out_mptsas_probe:
1323
1324         mptscsih_remove(pdev);
1325         return error;
1326 }
1327
1328 static void __devexit mptsas_remove(struct pci_dev *pdev)
1329 {
1330         MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1331         struct mptsas_portinfo *p, *n;
1332
1333         sas_remove_host(ioc->sh);
1334
1335         list_for_each_entry_safe(p, n, &ioc->sas_topology, list) {
1336                 list_del(&p->list);
1337                 kfree(p);
1338         }
1339
1340         mptscsih_remove(pdev);
1341 }
1342
1343 static struct pci_device_id mptsas_pci_table[] = {
1344         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064,
1345                 PCI_ANY_ID, PCI_ANY_ID },
1346         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1066,
1347                 PCI_ANY_ID, PCI_ANY_ID },
1348         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1068,
1349                 PCI_ANY_ID, PCI_ANY_ID },
1350         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064E,
1351                 PCI_ANY_ID, PCI_ANY_ID },
1352         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1066E,
1353                 PCI_ANY_ID, PCI_ANY_ID },
1354         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1068E,
1355                 PCI_ANY_ID, PCI_ANY_ID },
1356         {0}     /* Terminating entry */
1357 };
1358 MODULE_DEVICE_TABLE(pci, mptsas_pci_table);
1359
1360
1361 static struct pci_driver mptsas_driver = {
1362         .name           = "mptsas",
1363         .id_table       = mptsas_pci_table,
1364         .probe          = mptsas_probe,
1365         .remove         = __devexit_p(mptsas_remove),
1366         .shutdown       = mptscsih_shutdown,
1367 #ifdef CONFIG_PM
1368         .suspend        = mptscsih_suspend,
1369         .resume         = mptscsih_resume,
1370 #endif
1371 };
1372
1373 static int __init
1374 mptsas_init(void)
1375 {
1376         show_mptmod_ver(my_NAME, my_VERSION);
1377
1378         mptsas_transport_template =
1379             sas_attach_transport(&mptsas_transport_functions);
1380         if (!mptsas_transport_template)
1381                 return -ENODEV;
1382
1383         mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER);
1384         mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER);
1385         mptsasInternalCtx =
1386                 mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
1387         mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);
1388
1389         if (mpt_event_register(mptsasDoneCtx, mptscsih_event_process) == 0) {
1390                 devtprintk((KERN_INFO MYNAM
1391                   ": Registered for IOC event notifications\n"));
1392         }
1393
1394         if (mpt_reset_register(mptsasDoneCtx, mptscsih_ioc_reset) == 0) {
1395                 dprintk((KERN_INFO MYNAM
1396                   ": Registered for IOC reset notifications\n"));
1397         }
1398
1399         return pci_register_driver(&mptsas_driver);
1400 }
1401
1402 static void __exit
1403 mptsas_exit(void)
1404 {
1405         pci_unregister_driver(&mptsas_driver);
1406         sas_release_transport(mptsas_transport_template);
1407
1408         mpt_reset_deregister(mptsasDoneCtx);
1409         mpt_event_deregister(mptsasDoneCtx);
1410
1411         mpt_deregister(mptsasMgmtCtx);
1412         mpt_deregister(mptsasInternalCtx);
1413         mpt_deregister(mptsasTaskCtx);
1414         mpt_deregister(mptsasDoneCtx);
1415 }
1416
1417 module_init(mptsas_init);
1418 module_exit(mptsas_exit);