2 # Multifunction miscellaneous devices
6 menu "Multifunction device drivers"
14 bool "Support Marvell 88PM8606/88PM8607"
15 depends on I2C=y && GENERIC_HARDIRQS
19 This supports for Marvell 88PM8606/88PM8607 Power Management IC.
20 This includes the I2C driver and the core APIs _only_, you have to
21 select individual components like voltage regulators, RTC and
22 battery-charger under the corresponding menus.
25 tristate "Support Marvell 88PM800"
26 depends on I2C=y && GENERIC_HARDIRQS
31 This supports for Marvell 88PM800 Power Management IC.
32 This includes the I2C driver and the core APIs _only_, you have to
33 select individual components like voltage regulators, RTC and
34 battery-charger under the corresponding menus.
37 tristate "Support Marvell 88PM805"
38 depends on I2C=y && GENERIC_HARDIRQS
43 This supports for Marvell 88PM805 Power Management IC. This includes
44 the I2C driver and the core APIs _only_, you have to select individual
45 components like codec device, headset/Mic device under the
49 tristate "Support for Silicon Motion SM501"
51 This is the core driver for the Silicon Motion SM501 multimedia
52 companion chip. This device is a multifunction device which may
53 provide numerous interfaces including USB host controller, USB gadget,
54 asynchronous serial ports, audio functions, and a dual display video
55 interface. The device may be connected by PCI or local bus with
56 varying functions enabled.
59 bool "Export GPIO via GPIO layer"
60 depends on MFD_SM501 && GPIOLIB
62 This option uses the gpio library layer to export the 64 GPIO
63 lines on the SM501. The platform data is used to supply the
64 base number for the first GPIO line to register.
67 tristate "Support for Realtek PCI-E card reader"
71 This supports for Realtek PCI-Express card reader including rts5209,
72 rts5229, rtl8411, etc. Realtek card reader supports access to many
73 types of memory cards, such as Memory Stick, Memory Stick Pro,
74 Secure Digital and MultiMediaCard.
77 bool "Support for Compaq ASIC3"
78 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
81 This driver supports the ASIC3 multifunction chip found on many
82 PDAs (mainly iPAQ and HTC based ones)
84 config MFD_DAVINCI_VOICECODEC
88 config MFD_DM355EVM_MSP
89 bool "DaVinci DM355 EVM microcontroller"
90 depends on I2C=y && MACH_DAVINCI_DM355_EVM
92 This driver supports the MSP430 microcontroller used on these
93 boards. MSP430 firmware manages resets and power sequencing,
94 inputs from buttons and the IR remote, LEDs, an RTC, and more.
97 tristate "TI Sequencer Serial Port support"
98 depends on ARCH_DAVINCI_TNETV107X
101 Say Y here if you want support for the Sequencer Serial Port
102 in a Texas Instruments TNETV107X SoC.
104 To compile this driver as a module, choose M here: the
105 module will be called ti-ssp.
108 bool "HTC EGPIO support"
109 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
111 This driver supports the CPLD egpio chip present on
112 several HTC phones. It provides basic support for input
113 pins, output pins, and irqs.
116 tristate "HTC PASIC3 LED/DS1WM chip support"
119 This core driver provides register access for the LED/DS1WM
120 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
121 HTC Magician devices, respectively. Actual functionality is
122 handled by the leds-pasic3 and ds1wm drivers.
125 bool "HTC I2C PLD chip support"
126 depends on I2C=y && GPIOLIB
128 If you say yes here you get support for the supposed CPLD
129 found on omap850 HTC devices like the HTC Wizard and HTC Herald.
130 This device provides input and output GPIOs through an I2C
131 interface to one or more sub-chips.
134 tristate "Philips UCB1400 Core driver"
138 This enables support for the Philips UCB1400 core functions.
139 The UCB1400 is an AC97 audio codec.
141 To compile this driver as a module, choose M here: the
142 module will be called ucb1400_core.
145 tristate "LM3533 Lighting Power chip"
150 Say yes here to enable support for National Semiconductor / TI
151 LM3533 Lighting Power chips.
153 This driver provides common support for accessing the device;
154 additional drivers must be enabled in order to use the LED,
155 backlight or ambient-light-sensor functionality of the device.
158 tristate "TPS61050/61052 Boost Converters"
162 select REGULATOR_FIXED_VOLTAGE
164 This option enables a driver for the TP61050/TPS61052
165 high-power "white LED driver". This boost converter is
166 sometimes used for other things than white LEDs, and
167 also contains a GPIO pin.
170 tristate "TPS6501x Power Management chips"
171 depends on I2C && GPIOLIB
172 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
174 If you say yes here you get support for the TPS6501x series of
175 Power Management chips. These include voltage regulators,
176 lithium ion/polymer battery charging, and other features that
177 are often used in portable devices like cell phones and cameras.
179 This driver can also be built as a module. If so, the module
180 will be called tps65010.
183 tristate "TPS6507x Power Management / Touch Screen chips"
187 If you say yes here you get support for the TPS6507x series of
188 Power Management / Touch Screen chips. These include voltage
189 regulators, lithium ion/polymer battery charging, touch screen
190 and other features that are often used in portable devices.
191 This driver can also be built as a module. If so, the module
192 will be called tps6507x.
195 tristate "TPS65217 Power Management / White LED chips"
200 If you say yes here you get support for the TPS65217 series of
201 Power Management / White LED chips.
202 These include voltage regulators, lithium ion/polymer battery
203 charger, wled and other features that are often used in portable
206 This driver can also be built as a module. If so, the module
207 will be called tps65217.
210 bool "TPS6586x Power Management chips"
211 depends on I2C=y && GENERIC_HARDIRQS
215 If you say yes here you get support for the TPS6586X series of
216 Power Management chips.
217 This driver provides common support for accessing the device,
218 additional drivers must be enabled in order to use the
219 functionality of the device.
221 This driver can also be built as a module. If so, the module
222 will be called tps6586x.
225 bool "TPS65910 Power Management chip"
226 depends on I2C=y && GPIOLIB
231 if you say yes here you get support for the TPS65910 series of
232 Power Management chips.
238 config MFD_TPS65912_I2C
239 bool "TPS65912 Power Management chip with I2C"
242 depends on I2C=y && GPIOLIB
244 If you say yes here you get support for the TPS65912 series of
245 PM chips with I2C interface.
247 config MFD_TPS65912_SPI
248 bool "TPS65912 Power Management chip with SPI"
251 depends on SPI_MASTER && GPIOLIB
253 If you say yes here you get support for the TPS65912 series of
254 PM chips with SPI interface.
257 bool "Texas Instruments TWL92330/Menelaus PM chip"
258 depends on I2C=y && ARCH_OMAP2
260 If you say yes here you get support for the Texas Instruments
261 TWL92330/Menelaus Power Management chip. This include voltage
262 regulators, Dual slot memory card transceivers, real-time clock
263 and other features that are often used in portable devices like
264 cell phones and PDAs.
267 bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
268 depends on I2C=y && GENERIC_HARDIRQS
271 Say yes here if you have TWL4030 / TWL6030 family chip on your board.
272 This core driver provides register access and IRQ handling
273 facilities, and registers devices for the various functions
274 so that function-specific drivers can bind to them.
276 These multi-function chips are found on many OMAP2 and OMAP3
277 boards, providing power management, RTC, GPIO, keypad, a
278 high speed USB OTG transceiver, an audio codec (on most
279 versions) and many other features.
282 tristate "Texas Instruments TWL4030 MADC"
283 depends on TWL4030_CORE
285 This driver provides support for triton TWL4030-MADC. The
286 driver supports both RT and SW conversion methods.
288 This driver can be built as a module. If so it will be
292 bool "Support power resources on TWL4030 family chips"
293 depends on TWL4030_CORE && ARM
295 Say yes here if you want to use the power resources on the
296 TWL4030 family chips. Most of these resources are regulators,
297 which have a separate driver; some are control signals, such
298 as clock request handshaking.
300 This driver uses board-specific data to initialize the resources
301 and load scripts controlling which resources are switched off/on
302 or reset when a sleep, wakeup or warm reset event occurs.
304 config MFD_TWL4030_AUDIO
306 depends on TWL4030_CORE
311 bool "Support for TWL6040 audio codec"
312 depends on I2C=y && GENERIC_HARDIRQS
318 Say yes here if you want support for Texas Instruments TWL6040 audio
320 This driver provides common support for accessing the device,
321 additional drivers must be enabled in order to use the
322 functionality of the device (audio, vibra).
325 bool "Support STMicroelectronics STMPE"
326 depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
329 Support for the STMPE family of I/O Expanders from
332 Currently supported devices are:
334 STMPE811: GPIO, Touchscreen
335 STMPE1601: GPIO, Keypad
336 STMPE2401: GPIO, Keypad
337 STMPE2403: GPIO, Keypad
339 This driver provides common support for accessing the device,
340 additional drivers must be enabled in order to use the functionality
341 of the device. Currently available sub drivers are:
345 Touchscreen: stmpe-ts
347 menu "STMPE Interface Drivers"
351 bool "STMPE I2C Inteface"
355 This is used to enable I2C interface of STMPE
358 bool "STMPE SPI Inteface"
359 depends on SPI_MASTER
361 This is used to enable SPI interface of STMPE
365 bool "Support Toshiba TC35892 and variants"
366 depends on I2C=y && GENERIC_HARDIRQS
369 Support for the Toshiba TC35892 and variants I/O Expander.
371 This driver provides common support for accessing the device,
372 additional drivers must be enabled in order to use the
373 functionality of the device.
380 bool "Support Toshiba T7L66XB"
381 depends on ARM && HAVE_CLK
385 Support for Toshiba Mobile IO Controller T7L66XB
388 bool "Support for the SMSC ECE1099 series chips"
393 If you say yes here you get support for the
394 ece1099 chips from SMSC.
396 To compile this driver as a module, choose M here: the
397 module will be called smsc.
400 bool "Support Toshiba TC6387XB"
401 depends on ARM && HAVE_CLK
405 Support for Toshiba Mobile IO Controller TC6387XB
408 bool "Support Toshiba TC6393XB"
409 depends on ARM && HAVE_CLK
414 Support for Toshiba Mobile IO Controller TC6393XB
417 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
420 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
421 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
422 usually found on PXA processors-based platforms. This includes
423 the I2C driver and the core APIs _only_, you have to select
424 individual components like LCD backlight, voltage regulators,
425 LEDs and battery-charger under the corresponding menus.
431 config MFD_DA9052_SPI
432 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
436 depends on SPI_MASTER=y
438 Support for the Dialog Semiconductor DA9052 PMIC
439 when controlled using SPI. This driver provides common support
440 for accessing the device, additional drivers must be enabled in
441 order to use the functionality of the device.
443 config MFD_DA9052_I2C
444 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
450 Support for the Dialog Semiconductor DA9052 PMIC
451 when controlled using I2C. This driver provides common support
452 for accessing the device, additional drivers must be enabled in
453 order to use the functionality of the device.
456 bool "Dialog Semiconductor DA9055 PMIC Support"
463 Say yes here for support of Dialog Semiconductor DA9055. This is
464 a Power Management IC. This driver provides common support for
465 accessing the device as well as the I2C interface to the chip itself.
466 Additional drivers must be enabled in order to use the functionality
469 This driver can be built as a module. If built as a module it will be
473 bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
476 Say yes here to add support for Analog Devices AD5520 and ADP5501,
477 Multifunction Power Management IC. This includes
478 the I2C driver and the core APIs _only_, you have to select
479 individual components like LCD backlight, LEDs, GPIOs and Kepad
480 under the corresponding menus.
483 bool "Texas Instruments LP8788 Power Management Unit Driver"
489 TI LP8788 PMU supports regulators, battery charger, RTC,
490 ADC, backlight driver and current sinks.
493 bool "Maxim Semiconductor MAX77686 PMIC Support"
494 depends on I2C=y && GENERIC_HARDIRQS
499 Say yes here to support for Maxim Semiconductor MAX77686.
500 This is a Power Management IC with RTC on chip.
501 This driver provides common support for accessing the device;
502 additional drivers must be enabled in order to use the functionality
506 bool "Maxim Semiconductor MAX77693 PMIC Support"
507 depends on I2C=y && GENERIC_HARDIRQS
511 Say yes here to support for Maxim Semiconductor MAX77693.
512 This is a companion Power Management IC with Flash, Haptic, Charger,
513 and MUIC(Micro USB Interface Controller) controls on chip.
514 This driver provides common support for accessing the device;
515 additional drivers must be enabled in order to use the functionality
519 tristate "Maxim Semiconductor MAX8907 PMIC Support"
521 depends on I2C=y && GENERIC_HARDIRQS
525 Say yes here to support for Maxim Semiconductor MAX8907. This is
526 a Power Management IC. This driver provides common support for
527 accessing the device; additional drivers must be enabled in order
528 to use the functionality of the device.
531 bool "Maxim Semiconductor MAX8925 PMIC Support"
532 depends on I2C=y && GENERIC_HARDIRQS
535 Say yes here to support for Maxim Semiconductor MAX8925. This is
536 a Power Management IC. This driver provides common support for
537 accessing the device, additional drivers must be enabled in order
538 to use the functionality of the device.
541 bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
542 depends on I2C=y && GENERIC_HARDIRQS
546 Say yes here to support for Maxim Semiconductor MAX8997/8966.
547 This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
548 MUIC controls on chip.
549 This driver provides common support for accessing the device;
550 additional drivers must be enabled in order to use the functionality
554 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
555 depends on I2C=y && GENERIC_HARDIRQS
558 Say yes here to support for Maxim Semiconductor MAX8998 and
559 National Semiconductor LP3974. This is a Power Management IC.
560 This driver provides common support for accessing the device,
561 additional drivers must be enabled in order to use the functionality
565 bool "SAMSUNG Electronics PMIC Series Support"
566 depends on I2C=y && GENERIC_HARDIRQS
571 Support for the Samsung Electronics MFD series.
572 This driver provides common support for accessing the device,
573 additional drivers must be enabled in order to use the functionality
582 config MFD_ARIZONA_I2C
583 tristate "Support Wolfson Microelectronics Arizona platform with I2C"
589 Support for the Wolfson Microelectronics Arizona platform audio SoC
590 core functionality controlled via I2C.
592 config MFD_ARIZONA_SPI
593 tristate "Support Wolfson Microelectronics Arizona platform with SPI"
597 depends on SPI_MASTER
599 Support for the Wolfson Microelectronics Arizona platform audio SoC
600 core functionality controlled via I2C.
603 bool "Support Wolfson Microelectronics WM5102"
604 depends on MFD_ARIZONA
606 Support for Wolfson Microelectronics WM5102 low power audio SoC
609 bool "Support Wolfson Microelectronics WM5110"
610 depends on MFD_ARIZONA
612 Support for Wolfson Microelectronics WM5110 low power audio SoC
615 bool "Support Wolfson Microelectronics WM8400"
620 Support for the Wolfson Microelecronics WM8400 PMIC and audio
621 CODEC. This driver provides common support for accessing
622 the device, additional drivers must be enabled in order to use
623 the functionality of the device.
627 depends on GENERIC_HARDIRQS
629 config MFD_WM831X_I2C
630 bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
635 depends on I2C=y && GENERIC_HARDIRQS
637 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
638 when controlled using I2C. This driver provides common support
639 for accessing the device, additional drivers must be enabled in
640 order to use the functionality of the device.
642 config MFD_WM831X_SPI
643 bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
648 depends on SPI_MASTER && GENERIC_HARDIRQS
650 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
651 when controlled using SPI. This driver provides common support
652 for accessing the device, additional drivers must be enabled in
653 order to use the functionality of the device.
657 depends on GENERIC_HARDIRQS
659 config MFD_WM8350_CONFIG_MODE_0
661 depends on MFD_WM8350
663 config MFD_WM8350_CONFIG_MODE_1
665 depends on MFD_WM8350
667 config MFD_WM8350_CONFIG_MODE_2
669 depends on MFD_WM8350
671 config MFD_WM8350_CONFIG_MODE_3
673 depends on MFD_WM8350
675 config MFD_WM8351_CONFIG_MODE_0
677 depends on MFD_WM8350
679 config MFD_WM8351_CONFIG_MODE_1
681 depends on MFD_WM8350
683 config MFD_WM8351_CONFIG_MODE_2
685 depends on MFD_WM8350
687 config MFD_WM8351_CONFIG_MODE_3
689 depends on MFD_WM8350
691 config MFD_WM8352_CONFIG_MODE_0
693 depends on MFD_WM8350
695 config MFD_WM8352_CONFIG_MODE_1
697 depends on MFD_WM8350
699 config MFD_WM8352_CONFIG_MODE_2
701 depends on MFD_WM8350
703 config MFD_WM8352_CONFIG_MODE_3
705 depends on MFD_WM8350
707 config MFD_WM8350_I2C
708 bool "Support Wolfson Microelectronics WM8350 with I2C"
710 depends on I2C=y && GENERIC_HARDIRQS
712 The WM8350 is an integrated audio and power management
713 subsystem with watchdog and RTC functionality for embedded
714 systems. This option enables core support for the WM8350 with
715 I2C as the control interface. Additional options must be
716 selected to enable support for the functionality of the chip.
719 bool "Support Wolfson Microelectronics WM8994"
723 depends on I2C=y && GENERIC_HARDIRQS
725 The WM8994 is a highly integrated hi-fi CODEC designed for
726 smartphone applicatiosn. As well as audio functionality it
727 has on board GPIO and regulator functionality which is
728 supported via the relevant subsystems. This driver provides
729 core support for the WM8994, in order to use the actual
730 functionaltiy of the device other drivers must be enabled.
733 tristate "Support for NXP PCF50633"
737 Say yes here if you have NXP PCF50633 chip on your board.
738 This core driver provides register access and IRQ handling
739 facilities, and registers devices for the various functions
740 so that function-specific drivers can bind to them.
743 tristate "Support for NXP PCF50633 ADC"
744 depends on MFD_PCF50633
746 Say yes here if you want to include support for ADC in the
750 tristate "Support for NXP PCF50633 GPIO"
751 depends on MFD_PCF50633
753 Say yes here if you want to include support GPIO for pins on
761 depends on SPI_MASTER || I2C
765 Enable support for the Freescale MC13783 and MC13892 PMICs.
766 This driver provides common support for accessing the device,
767 additional drivers must be enabled in order to use the
768 functionality of the device.
770 config MFD_MC13XXX_SPI
771 tristate "Freescale MC13783 and MC13892 SPI interface"
772 depends on SPI_MASTER
776 Select this if your MC13xxx is connected via an SPI bus.
778 config MFD_MC13XXX_I2C
779 tristate "Freescale MC13892 I2C interface"
784 Select this if your MC13xxx is connected via an I2C bus.
787 bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
788 default y if ARCH_U300 || ARCH_U8500
790 Say yes here if you have the ABX500 Mixed Signal IC family
791 chips. This core driver expose register access functions.
792 Functionality specific drivers using these functions can
793 remain unchanged when IC changes. Binding of the functions to
794 actual register access is done by the IC core driver.
797 bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
798 depends on I2C=y && ABX500_CORE
800 default y if ARCH_U300
802 Select this to enable the AB3100 Mixed Signal IC core
803 functionality. This connects to a AB3100 on the I2C bus
804 and expose a number of symbols needed for dependent devices
805 to read and write registers and subscribe to events from
806 this multi-functional IC. This is needed to use other features
807 of the AB3100 such as battery-backed RTC, charging control,
808 LEDs, vibrator, system power and temperature, power management
812 tristate "ST-Ericsson AB3100 OTP functions"
813 depends on AB3100_CORE
814 default y if AB3100_CORE
816 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
817 programmable memory) support. This exposes a sysfs file to read
822 depends on GENERIC_HARDIRQS && SPI_MASTER
824 This enables the PCAP ASIC present on EZX Phones. This is
825 needed for MMC, TouchScreen, Sound, USB, etc..
828 bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
829 depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
833 Select this option to enable access to AB8500 power management
834 chip. This connects to U8500 either on the SSP/SPI bus (deprecated
835 since hardware version v1.0) or the I2C bus via PRCMU. It also adds
836 the irq_chip parts for handling the Mixed Signal chip events.
837 This chip embeds various other multimedia funtionalities as well.
840 bool "Enable debug info via debugfs"
841 depends on AB8500_CORE && DEBUG_FS
842 default y if DEBUG_FS
844 Select this option if you want debug information using the debug
848 bool "AB8500 GPADC driver"
849 depends on AB8500_CORE && REGULATOR_AB8500
852 AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
854 config MFD_DB8500_PRCMU
855 bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
856 depends on UX500_SOC_DB8500
859 Select this option to enable support for the DB8500 Power Reset
860 and Control Management Unit. This is basically an autonomous
861 system controller running an XP70 microprocessor, which is accessed
862 through a register map.
865 tristate "Support for CS5535 and CS5536 southbridge core functions"
867 depends on PCI && X86
869 This is the core driver for CS5535/CS5536 MFD functions. This is
870 necessary for using the board's GPIO and MFGPT functionality.
872 config MFD_TIMBERDALE
873 tristate "Support for the Timberdale FPGA"
875 depends on PCI && GPIOLIB
877 This is the core driver for the timberdale FPGA. This device is a
878 multifunction device which exposes numerous platform devices.
880 The timberdale FPGA can be found on the Intel Atom development board
881 for in-vehicle infontainment, called Russellville.
884 tristate "Intel SCH LPC"
888 LPC bridge function of the Intel SCH provides support for
889 System Management Bus and General Purpose I/O.
892 tristate "Intel ICH LPC"
896 The LPC bridge function of the Intel ICH provides support for
897 many functional units. This driver provides needed support for
898 other drivers to control these functions, currently GPIO and
902 tristate "Support for RDC-R321x southbridge"
906 Say yes here if you want to have support for the RDC R-321x SoC
907 southbridge which provides access to GPIOs and Watchdog using the
908 southbridge PCI device configuration space.
910 config MFD_JANZ_CMODIO
911 tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
915 This is the core driver for the Janz CMOD-IO PCI MODULbus
916 carrier board. This device is a PCI to MODULbus bridge which may
917 host many different types of MODULbus daughterboards, including
918 CAN and GPIO controllers.
920 config MFD_JZ4740_ADC
921 bool "Support for the JZ4740 SoC ADC core"
923 select GENERIC_IRQ_CHIP
924 depends on MACH_JZ4740
926 Say yes here if you want support for the ADC unit in the JZ4740 SoC.
927 This driver is necessary for jz4740-battery and jz4740-hwmon driver.
930 tristate "Support for VIA VX855/VX875 integrated south bridge"
934 Say yes here to enable support for various functions of the
935 VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
936 and/or vx855_gpio drivers for this to do anything useful.
938 config MFD_WL1273_CORE
939 tristate "Support for TI WL1273 FM radio."
944 This is the core driver for the TI WL1273 FM radio. This MFD
945 driver connects the radio-wl1273 V4L2 module and the wl1273
948 config MFD_OMAP_USB_HOST
949 bool "Support OMAP USBHS core and TLL driver"
950 depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
953 This is the core driver for the OAMP EHCI and OHCI drivers.
954 This MFD driver does the required setup functionalities for
955 OMAP USB Host drivers.
960 config MFD_PM8921_CORE
961 tristate "Qualcomm PM8921 PMIC chip"
966 If you say yes to this option, support will be included for the
967 built-in PM8921 PMIC chip.
969 This is required if your board has a PM8921 and uses its features,
970 such as: MPPs, GPIOs, regulators, interrupts, and PWM.
972 Say M here if you want to include support for PM8921 chip as a module.
973 This will build a module called "pm8921-core".
975 config MFD_PM8XXX_IRQ
976 bool "Support for Qualcomm PM8xxx IRQ features"
977 depends on MFD_PM8XXX
978 default y if MFD_PM8XXX
980 This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
982 This is required to use certain other PM 8xxx features, such as GPIO
985 config TPS65911_COMPARATOR
989 bool "TPS65090 Power Management chips"
990 depends on I2C=y && GENERIC_HARDIRQS
994 If you say yes here you get support for the TPS65090 series of
995 Power Management chips.
996 This driver provides common support for accessing the device,
997 additional drivers must be enabled in order to use the
998 functionality of the device.
1000 config MFD_AAT2870_CORE
1001 bool "Support for the AnalogicTech AAT2870"
1003 depends on I2C=y && GPIOLIB
1005 If you say yes here you get support for the AAT2870.
1006 This driver provides common support for accessing the device,
1007 additional drivers must be enabled in order to use the
1008 functionality of the device.
1010 config MFD_INTEL_MSIC
1011 bool "Support for Intel MSIC"
1012 depends on INTEL_SCU_IPC
1015 Select this option to enable access to Intel MSIC (Avatele
1016 Passage) chip. This chip embeds audio, battery, GPIO, etc.
1017 devices used in Intel Medfield platforms.
1020 bool "Ricoh RC5T583 Power Management system device"
1021 depends on I2C=y && GENERIC_HARDIRQS
1025 Select this option to get support for the RICOH583 Power
1026 Management system device.
1027 This driver provides common support for accessing the device
1028 through i2c interface. The device supports multiple sub-devices
1029 like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
1030 Additional drivers must be enabled in order to use the
1031 different functionality of the device.
1034 bool "STA2X11 multi function device support"
1039 bool "System Controller Register R/W Based on Regmap"
1043 Select this option to enable accessing system control registers
1047 bool "Support for the TI Palmas series chips"
1053 If you say yes here you get support for the Palmas
1054 series of PMIC chips from Texas Instruments.
1059 menu "Multimedia Capabilities Port drivers"
1060 depends on ARCH_SA1100
1067 tristate "Support SA11x0 MCP interface"
1068 depends on ARCH_SA1100
1073 bool "Support for UCB1200 / UCB1300"
1074 depends on MCP_SA11X0
1077 config MCP_UCB1200_TS
1078 tristate "Touchscreen interface support"
1079 depends on MCP_UCB1200 && INPUT
1083 config VEXPRESS_CONFIG
1086 Platform configuration infrastructure for the ARM Ltd.