2 # Multifunction miscellaneous devices
5 menu "Multifunction device drivers"
13 tristate "Support for Silicon Motion SM501"
15 This is the core driver for the Silicon Motion SM501 multimedia
16 companion chip. This device is a multifunction device which may
17 provide numerous interfaces including USB host controller, USB gadget,
18 asynchronous serial ports, audio functions, and a dual display video
19 interface. The device may be connected by PCI or local bus with
20 varying functions enabled.
23 bool "Export GPIO via GPIO layer"
24 depends on MFD_SM501 && GPIOLIB
26 This option uses the gpio library layer to export the 64 GPIO
27 lines on the SM501. The platform data is used to supply the
28 base number for the first GPIO line to register.
31 bool "Support for Compaq ASIC3"
32 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
35 This driver supports the ASIC3 multifunction chip found on many
36 PDAs (mainly iPAQ and HTC based ones)
38 config MFD_SH_MOBILE_SDHI
39 bool "Support for SuperH Mobile SDHI"
43 This driver supports the SDHI hardware block found in many
46 config MFD_DM355EVM_MSP
47 bool "DaVinci DM355 EVM microcontroller"
48 depends on I2C && MACH_DAVINCI_DM355_EVM
50 This driver supports the MSP430 microcontroller used on these
51 boards. MSP430 firmware manages resets and power sequencing,
52 inputs from buttons and the IR remote, LEDs, an RTC, and more.
55 bool "HTC EGPIO support"
56 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
58 This driver supports the CPLD egpio chip present on
59 several HTC phones. It provides basic support for input
60 pins, output pins, and irqs.
63 tristate "HTC PASIC3 LED/DS1WM chip support"
66 This core driver provides register access for the LED/DS1WM
67 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
68 HTC Magician devices, respectively. Actual functionality is
69 handled by the leds-pasic3 and ds1wm drivers.
72 tristate "Philips UCB1400 Core driver"
76 This enables support for the Philips UCB1400 core functions.
77 The UCB1400 is an AC97 audio codec.
79 To compile this driver as a module, choose M here: the
80 module will be called ucb1400_core.
83 tristate "TPS6501x Power Management chips"
84 depends on I2C && GPIOLIB
85 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
87 If you say yes here you get support for the TPS6501x series of
88 Power Management chips. These include voltage regulators,
89 lithium ion/polymer battery charging, and other features that
90 are often used in portable devices like cell phones and cameras.
92 This driver can also be built as a module. If so, the module
93 will be called tps65010.
96 bool "Texas Instruments TWL92330/Menelaus PM chip"
97 depends on I2C=y && ARCH_OMAP24XX
99 If you say yes here you get support for the Texas Instruments
100 TWL92330/Menelaus Power Management chip. This include voltage
101 regulators, Dual slot memory card transceivers, real-time clock
102 and other features that are often used in portable devices like
103 cell phones and PDAs.
106 bool "Texas Instruments TWL4030/TPS659x0 Support"
107 depends on I2C=y && GENERIC_HARDIRQS
109 Say yes here if you have TWL4030 family chip on your board.
110 This core driver provides register access and IRQ handling
111 facilities, and registers devices for the various functions
112 so that function-specific drivers can bind to them.
114 These multi-function chips are found on many OMAP2 and OMAP3
115 boards, providing power management, RTC, GPIO, keypad, a
116 high speed USB OTG transceiver, an audio codec (on most
117 versions) and many other features.
120 bool "Support power resources on TWL4030 family chips"
121 depends on TWL4030_CORE && ARM
123 Say yes here if you want to use the power resources on the
124 TWL4030 family chips. Most of these resources are regulators,
125 which have a separate driver; some are control signals, such
126 as clock request handshaking.
128 This driver uses board-specific data to initialize the resources
129 and load scripts controling which resources are switched off/on
130 or reset when a sleep, wakeup or warm reset event occurs.
134 depends on TWL4030_CORE
143 bool "Support Toshiba T7L66XB"
144 depends on ARM && HAVE_CLK
148 Support for Toshiba Mobile IO Controller T7L66XB
151 bool "Support Toshiba TC6387XB"
152 depends on ARM && HAVE_CLK
156 Support for Toshiba Mobile IO Controller TC6387XB
159 bool "Support Toshiba TC6393XB"
160 depends on GPIOLIB && ARM
164 Support for Toshiba Mobile IO Controller TC6393XB
167 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
170 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
171 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
172 usually found on PXA processors-based platforms. This includes
173 the I2C driver and the core APIs _only_, you have to select
174 individual components like LCD backlight, voltage regulators,
175 LEDs and battery-charger under the corresponding menus.
178 tristate "Support Wolfson Microelectronics WM8400"
182 Support for the Wolfson Microelecronics WM8400 PMIC and audio
183 CODEC. This driver provides common support for accessing
184 the device, additional drivers must be enabled in order to use
185 the functionality of the device.
188 tristate "Support Wolfson Microelectronics WM831x PMICs"
192 Support for the Wolfson Microelecronics WM831x PMICs. This
193 driver provides common support for accessing the device,
194 additional drivers must be enabled in order to use the
195 functionality of the device.
200 config MFD_WM8350_CONFIG_MODE_0
202 depends on MFD_WM8350
204 config MFD_WM8350_CONFIG_MODE_1
206 depends on MFD_WM8350
208 config MFD_WM8350_CONFIG_MODE_2
210 depends on MFD_WM8350
212 config MFD_WM8350_CONFIG_MODE_3
214 depends on MFD_WM8350
216 config MFD_WM8351_CONFIG_MODE_0
218 depends on MFD_WM8350
220 config MFD_WM8351_CONFIG_MODE_1
222 depends on MFD_WM8350
224 config MFD_WM8351_CONFIG_MODE_2
226 depends on MFD_WM8350
228 config MFD_WM8351_CONFIG_MODE_3
230 depends on MFD_WM8350
232 config MFD_WM8352_CONFIG_MODE_0
234 depends on MFD_WM8350
236 config MFD_WM8352_CONFIG_MODE_1
238 depends on MFD_WM8350
240 config MFD_WM8352_CONFIG_MODE_2
242 depends on MFD_WM8350
244 config MFD_WM8352_CONFIG_MODE_3
246 depends on MFD_WM8350
248 config MFD_WM8350_I2C
249 tristate "Support Wolfson Microelectronics WM8350 with I2C"
253 The WM8350 is an integrated audio and power management
254 subsystem with watchdog and RTC functionality for embedded
255 systems. This option enables core support for the WM8350 with
256 I2C as the control interface. Additional options must be
257 selected to enable support for the functionality of the chip.
260 tristate "Support for NXP PCF50633"
263 Say yes here if you have NXP PCF50633 chip on your board.
264 This core driver provides register access and IRQ handling
265 facilities, and registers devices for the various functions
266 so that function-specific drivers can bind to them.
269 tristate "Support Freescale MC13783"
270 depends on SPI_MASTER
273 Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
274 This driver provides common support for accessing the device,
275 additional drivers must be enabled in order to use the
276 functionality of the device.
279 tristate "Support for NXP PCF50633 ADC"
280 depends on MFD_PCF50633
282 Say yes here if you want to include support for ADC in the
286 tristate "Support for NXP PCF50633 GPIO"
287 depends on MFD_PCF50633
289 Say yes here if you want to include support GPIO for pins on
293 tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
295 default y if ARCH_U300
297 Select this to enable the AB3100 Mixed Signal IC core
298 functionality. This connects to a AB3100 on the I2C bus
299 and expose a number of symbols needed for dependent devices
300 to read and write registers and subscribe to events from
301 this multi-functional IC. This is needed to use other features
302 of the AB3100 such as battery-backed RTC, charging control,
303 LEDs, vibrator, system power and temperature, power management
307 tristate "ST-Ericsson AB3100 OTP functions"
308 depends on AB3100_CORE
309 default y if AB3100_CORE
311 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
312 programmable memory) support. This exposes a sysfs file to read
317 depends on GENERIC_HARDIRQS && SPI_MASTER
319 This enables the PCAP ASIC present on EZX Phones. This is
320 needed for MMC, TouchScreen, Sound, USB, etc..
324 menu "Multimedia Capabilities Port drivers"
325 depends on ARCH_SA1100
332 tristate "Support SA11x0 MCP interface"
333 depends on ARCH_SA1100
338 tristate "Support for UCB1200 / UCB1300"
341 config MCP_UCB1200_TS
342 tristate "Touchscreen interface support"
343 depends on MCP_UCB1200 && INPUT