2 # Multifunction miscellaneous devices
5 menu "Multifunction device drivers"
13 tristate "Support for Silicon Motion SM501"
15 This is the core driver for the Silicon Motion SM501 multimedia
16 companion chip. This device is a multifunction device which may
17 provide numerous interfaces including USB host controller, USB gadget,
18 asynchronous serial ports, audio functions, and a dual display video
19 interface. The device may be connected by PCI or local bus with
20 varying functions enabled.
23 bool "Export GPIO via GPIO layer"
24 depends on MFD_SM501 && GPIOLIB
26 This option uses the gpio library layer to export the 64 GPIO
27 lines on the SM501. The platform data is used to supply the
28 base number for the first GPIO line to register.
31 bool "Support for Compaq ASIC3"
32 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
35 This driver supports the ASIC3 multifunction chip found on many
36 PDAs (mainly iPAQ and HTC based ones)
38 config MFD_DM355EVM_MSP
39 bool "DaVinci DM355 EVM microcontroller"
40 depends on I2C && MACH_DAVINCI_DM355_EVM
42 This driver supports the MSP430 microcontroller used on these
43 boards. MSP430 firmware manages resets and power sequencing,
44 inputs from buttons and the IR remote, LEDs, an RTC, and more.
47 bool "HTC EGPIO support"
48 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
50 This driver supports the CPLD egpio chip present on
51 several HTC phones. It provides basic support for input
52 pins, output pins, and irqs.
55 tristate "HTC PASIC3 LED/DS1WM chip support"
58 This core driver provides register access for the LED/DS1WM
59 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
60 HTC Magician devices, respectively. Actual functionality is
61 handled by the leds-pasic3 and ds1wm drivers.
64 tristate "Philips UCB1400 Core driver"
68 This enables support for the Philips UCB1400 core functions.
69 The UCB1400 is an AC97 audio codec.
71 To compile this driver as a module, choose M here: the
72 module will be called ucb1400_core.
75 tristate "TPS6501x Power Management chips"
76 depends on I2C && GPIOLIB
77 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
79 If you say yes here you get support for the TPS6501x series of
80 Power Management chips. These include voltage regulators,
81 lithium ion/polymer battery charging, and other features that
82 are often used in portable devices like cell phones and cameras.
84 This driver can also be built as a module. If so, the module
85 will be called tps65010.
88 bool "Texas Instruments TWL92330/Menelaus PM chip"
89 depends on I2C=y && ARCH_OMAP24XX
91 If you say yes here you get support for the Texas Instruments
92 TWL92330/Menelaus Power Management chip. This include voltage
93 regulators, Dual slot memory card transceivers, real-time clock
94 and other features that are often used in portable devices like
98 bool "Texas Instruments TWL4030/TPS659x0 Support"
99 depends on I2C=y && GENERIC_HARDIRQS
101 Say yes here if you have TWL4030 family chip on your board.
102 This core driver provides register access and IRQ handling
103 facilities, and registers devices for the various functions
104 so that function-specific drivers can bind to them.
106 These multi-function chips are found on many OMAP2 and OMAP3
107 boards, providing power management, RTC, GPIO, keypad, a
108 high speed USB OTG transceiver, an audio codec (on most
109 versions) and many other features.
112 bool "Support power resources on TWL4030 family chips"
113 depends on TWL4030_CORE && ARM
115 Say yes here if you want to use the power resources on the
116 TWL4030 family chips. Most of these resources are regulators,
117 which have a separate driver; some are control signals, such
118 as clock request handshaking.
120 This driver uses board-specific data to initialize the resources
121 and load scripts controling which resources are switched off/on
122 or reset when a sleep, wakeup or warm reset event occurs.
126 depends on TWL4030_CORE
135 bool "Support Toshiba T7L66XB"
136 depends on ARM && HAVE_CLK
140 Support for Toshiba Mobile IO Controller T7L66XB
143 bool "Support Toshiba TC6387XB"
144 depends on ARM && HAVE_CLK
148 Support for Toshiba Mobile IO Controller TC6387XB
151 bool "Support Toshiba TC6393XB"
152 depends on GPIOLIB && ARM
156 Support for Toshiba Mobile IO Controller TC6393XB
159 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
162 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
163 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
164 usually found on PXA processors-based platforms. This includes
165 the I2C driver and the core APIs _only_, you have to select
166 individual components like LCD backlight, voltage regulators,
167 LEDs and battery-charger under the corresponding menus.
170 tristate "Support Wolfson Microelectronics WM8400"
174 Support for the Wolfson Microelecronics WM8400 PMIC and audio
175 CODEC. This driver provides common support for accessing
176 the device, additional drivers must be enabled in order to use
177 the functionality of the device.
180 tristate "Support Wolfson Microelectronics WM831x PMICs"
184 Support for the Wolfson Microelecronics WM831x PMICs. This
185 driver provides common support for accessing the device,
186 additional drivers must be enabled in order to use the
187 functionality of the device.
192 config MFD_WM8350_CONFIG_MODE_0
194 depends on MFD_WM8350
196 config MFD_WM8350_CONFIG_MODE_1
198 depends on MFD_WM8350
200 config MFD_WM8350_CONFIG_MODE_2
202 depends on MFD_WM8350
204 config MFD_WM8350_CONFIG_MODE_3
206 depends on MFD_WM8350
208 config MFD_WM8351_CONFIG_MODE_0
210 depends on MFD_WM8350
212 config MFD_WM8351_CONFIG_MODE_1
214 depends on MFD_WM8350
216 config MFD_WM8351_CONFIG_MODE_2
218 depends on MFD_WM8350
220 config MFD_WM8351_CONFIG_MODE_3
222 depends on MFD_WM8350
224 config MFD_WM8352_CONFIG_MODE_0
226 depends on MFD_WM8350
228 config MFD_WM8352_CONFIG_MODE_1
230 depends on MFD_WM8350
232 config MFD_WM8352_CONFIG_MODE_2
234 depends on MFD_WM8350
236 config MFD_WM8352_CONFIG_MODE_3
238 depends on MFD_WM8350
240 config MFD_WM8350_I2C
241 tristate "Support Wolfson Microelectronics WM8350 with I2C"
245 The WM8350 is an integrated audio and power management
246 subsystem with watchdog and RTC functionality for embedded
247 systems. This option enables core support for the WM8350 with
248 I2C as the control interface. Additional options must be
249 selected to enable support for the functionality of the chip.
252 tristate "Support for NXP PCF50633"
255 Say yes here if you have NXP PCF50633 chip on your board.
256 This core driver provides register access and IRQ handling
257 facilities, and registers devices for the various functions
258 so that function-specific drivers can bind to them.
261 tristate "Support Freescale MC13783"
262 depends on SPI_MASTER
265 Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
266 This driver provides common support for accessing the device,
267 additional drivers must be enabled in order to use the
268 functionality of the device.
271 tristate "Support for NXP PCF50633 ADC"
272 depends on MFD_PCF50633
274 Say yes here if you want to include support for ADC in the
278 tristate "Support for NXP PCF50633 GPIO"
279 depends on MFD_PCF50633
281 Say yes here if you want to include support GPIO for pins on
285 tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
287 default y if ARCH_U300
289 Select this to enable the AB3100 Mixed Signal IC core
290 functionality. This connects to a AB3100 on the I2C bus
291 and expose a number of symbols needed for dependent devices
292 to read and write registers and subscribe to events from
293 this multi-functional IC. This is needed to use other features
294 of the AB3100 such as battery-backed RTC, charging control,
295 LEDs, vibrator, system power and temperature, power management
299 tristate "ST-Ericsson AB3100 OTP functions"
300 depends on AB3100_CORE
301 default y if AB3100_CORE
303 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
304 programmable memory) support. This exposes a sysfs file to read
309 depends on GENERIC_HARDIRQS && SPI_MASTER
311 This enables the PCAP ASIC present on EZX Phones. This is
312 needed for MMC, TouchScreen, Sound, USB, etc..
316 menu "Multimedia Capabilities Port drivers"
317 depends on ARCH_SA1100
324 tristate "Support SA11x0 MCP interface"
325 depends on ARCH_SA1100
330 tristate "Support for UCB1200 / UCB1300"
333 config MCP_UCB1200_TS
334 tristate "Touchscreen interface support"
335 depends on MCP_UCB1200 && INPUT