]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/mfd/axp20x.c
arm: imx6qdl: tx6: defconfig: mfg tool
[karo-tx-linux.git] / drivers / mfd / axp20x.c
1 /*
2  * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
3  *
4  * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
5  * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
6  * as well as 4 configurable GPIOs.
7  *
8  * Author: Carlo Caione <carlo@caione.org>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
14
15 #include <linux/err.h>
16 #include <linux/i2c.h>
17 #include <linux/interrupt.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/regmap.h>
22 #include <linux/slab.h>
23 #include <linux/regulator/consumer.h>
24 #include <linux/mfd/axp20x.h>
25 #include <linux/mfd/core.h>
26 #include <linux/of_device.h>
27 #include <linux/of_irq.h>
28
29 #define AXP20X_OFF      0x80
30
31 static const struct regmap_range axp20x_writeable_ranges[] = {
32         regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
33         regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
34 };
35
36 static const struct regmap_range axp20x_volatile_ranges[] = {
37         regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
38 };
39
40 static const struct regmap_access_table axp20x_writeable_table = {
41         .yes_ranges     = axp20x_writeable_ranges,
42         .n_yes_ranges   = ARRAY_SIZE(axp20x_writeable_ranges),
43 };
44
45 static const struct regmap_access_table axp20x_volatile_table = {
46         .yes_ranges     = axp20x_volatile_ranges,
47         .n_yes_ranges   = ARRAY_SIZE(axp20x_volatile_ranges),
48 };
49
50 static struct resource axp20x_pek_resources[] = {
51         {
52                 .name   = "PEK_DBR",
53                 .start  = AXP20X_IRQ_PEK_RIS_EDGE,
54                 .end    = AXP20X_IRQ_PEK_RIS_EDGE,
55                 .flags  = IORESOURCE_IRQ,
56         }, {
57                 .name   = "PEK_DBF",
58                 .start  = AXP20X_IRQ_PEK_FAL_EDGE,
59                 .end    = AXP20X_IRQ_PEK_FAL_EDGE,
60                 .flags  = IORESOURCE_IRQ,
61         },
62 };
63
64 static const struct regmap_config axp20x_regmap_config = {
65         .reg_bits       = 8,
66         .val_bits       = 8,
67         .wr_table       = &axp20x_writeable_table,
68         .volatile_table = &axp20x_volatile_table,
69         .max_register   = AXP20X_FG_RES,
70         .cache_type     = REGCACHE_RBTREE,
71 };
72
73 #define AXP20X_IRQ(_irq, _off, _mask) \
74         [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
75
76 static const struct regmap_irq axp20x_regmap_irqs[] = {
77         AXP20X_IRQ(ACIN_OVER_V,         0, 7),
78         AXP20X_IRQ(ACIN_PLUGIN,         0, 6),
79         AXP20X_IRQ(ACIN_REMOVAL,        0, 5),
80         AXP20X_IRQ(VBUS_OVER_V,         0, 4),
81         AXP20X_IRQ(VBUS_PLUGIN,         0, 3),
82         AXP20X_IRQ(VBUS_REMOVAL,        0, 2),
83         AXP20X_IRQ(VBUS_V_LOW,          0, 1),
84         AXP20X_IRQ(BATT_PLUGIN,         1, 7),
85         AXP20X_IRQ(BATT_REMOVAL,        1, 6),
86         AXP20X_IRQ(BATT_ENT_ACT_MODE,   1, 5),
87         AXP20X_IRQ(BATT_EXIT_ACT_MODE,  1, 4),
88         AXP20X_IRQ(CHARG,               1, 3),
89         AXP20X_IRQ(CHARG_DONE,          1, 2),
90         AXP20X_IRQ(BATT_TEMP_HIGH,      1, 1),
91         AXP20X_IRQ(BATT_TEMP_LOW,       1, 0),
92         AXP20X_IRQ(DIE_TEMP_HIGH,       2, 7),
93         AXP20X_IRQ(CHARG_I_LOW,         2, 6),
94         AXP20X_IRQ(DCDC1_V_LONG,        2, 5),
95         AXP20X_IRQ(DCDC2_V_LONG,        2, 4),
96         AXP20X_IRQ(DCDC3_V_LONG,        2, 3),
97         AXP20X_IRQ(PEK_SHORT,           2, 1),
98         AXP20X_IRQ(PEK_LONG,            2, 0),
99         AXP20X_IRQ(N_OE_PWR_ON,         3, 7),
100         AXP20X_IRQ(N_OE_PWR_OFF,        3, 6),
101         AXP20X_IRQ(VBUS_VALID,          3, 5),
102         AXP20X_IRQ(VBUS_NOT_VALID,      3, 4),
103         AXP20X_IRQ(VBUS_SESS_VALID,     3, 3),
104         AXP20X_IRQ(VBUS_SESS_END,       3, 2),
105         AXP20X_IRQ(LOW_PWR_LVL1,        3, 1),
106         AXP20X_IRQ(LOW_PWR_LVL2,        3, 0),
107         AXP20X_IRQ(TIMER,               4, 7),
108         AXP20X_IRQ(PEK_RIS_EDGE,        4, 6),
109         AXP20X_IRQ(PEK_FAL_EDGE,        4, 5),
110         AXP20X_IRQ(GPIO3_INPUT,         4, 3),
111         AXP20X_IRQ(GPIO2_INPUT,         4, 2),
112         AXP20X_IRQ(GPIO1_INPUT,         4, 1),
113         AXP20X_IRQ(GPIO0_INPUT,         4, 0),
114 };
115
116 static const struct of_device_id axp20x_of_match[] = {
117         { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
118         { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
119         { },
120 };
121 MODULE_DEVICE_TABLE(of, axp20x_of_match);
122
123 /*
124  * This is useless for OF-enabled devices, but it is needed by I2C subsystem
125  */
126 static const struct i2c_device_id axp20x_i2c_id[] = {
127         { },
128 };
129 MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
130
131 static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
132         .name                   = "axp20x_irq_chip",
133         .status_base            = AXP20X_IRQ1_STATE,
134         .ack_base               = AXP20X_IRQ1_STATE,
135         .mask_base              = AXP20X_IRQ1_EN,
136         .num_regs               = 5,
137         .irqs                   = axp20x_regmap_irqs,
138         .num_irqs               = ARRAY_SIZE(axp20x_regmap_irqs),
139         .mask_invert            = true,
140         .init_ack_masked        = true,
141 };
142
143 static const char * const axp20x_supplies[] = {
144         "acin",
145         "vin2",
146         "vin3",
147         "ldo24in",
148         "ldo3in",
149         "ldo5in",
150 };
151
152 static struct mfd_cell axp20x_cells[] = {
153         {
154                 .name                   = "axp20x-pek",
155                 .num_resources          = ARRAY_SIZE(axp20x_pek_resources),
156                 .resources              = axp20x_pek_resources,
157         }, {
158                 .name                   = "axp20x-regulator",
159                 .parent_supplies        = axp20x_supplies,
160                 .num_parent_supplies    = ARRAY_SIZE(axp20x_supplies),
161         },
162 };
163
164 static struct axp20x_dev *axp20x_pm_power_off;
165 static void axp20x_power_off(void)
166 {
167         regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
168                      AXP20X_OFF);
169 }
170
171 static int axp20x_i2c_probe(struct i2c_client *i2c,
172                          const struct i2c_device_id *id)
173 {
174         struct axp20x_dev *axp20x;
175         const struct of_device_id *of_id;
176         int ret;
177
178         axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
179         if (!axp20x)
180                 return -ENOMEM;
181
182         of_id = of_match_device(axp20x_of_match, &i2c->dev);
183         if (!of_id) {
184                 dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
185                 return -ENODEV;
186         }
187         axp20x->variant = (long) of_id->data;
188
189         axp20x->i2c_client = i2c;
190         axp20x->dev = &i2c->dev;
191         dev_set_drvdata(axp20x->dev, axp20x);
192
193         axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
194         if (IS_ERR(axp20x->regmap)) {
195                 ret = PTR_ERR(axp20x->regmap);
196                 dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
197                 return ret;
198         }
199
200         ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
201                                   IRQF_ONESHOT | IRQF_SHARED, -1,
202                                   &axp20x_regmap_irq_chip,
203                                   &axp20x->regmap_irqc);
204         if (ret) {
205                 dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
206                 return ret;
207         }
208
209         ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
210                               ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
211
212         if (ret) {
213                 dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
214                 regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc);
215                 return ret;
216         }
217
218         if (!pm_power_off) {
219                 axp20x_pm_power_off = axp20x;
220                 pm_power_off = axp20x_power_off;
221         }
222
223         dev_info(&i2c->dev, "AXP20X driver loaded\n");
224
225         return 0;
226 }
227
228 static int axp20x_i2c_remove(struct i2c_client *i2c)
229 {
230         struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
231
232         if (axp20x == axp20x_pm_power_off) {
233                 axp20x_pm_power_off = NULL;
234                 pm_power_off = NULL;
235         }
236
237         mfd_remove_devices(axp20x->dev);
238         regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc);
239
240         return 0;
241 }
242
243 static struct i2c_driver axp20x_i2c_driver = {
244         .driver = {
245                 .name   = "axp20x",
246                 .owner  = THIS_MODULE,
247                 .of_match_table = of_match_ptr(axp20x_of_match),
248         },
249         .probe          = axp20x_i2c_probe,
250         .remove         = axp20x_i2c_remove,
251         .id_table       = axp20x_i2c_id,
252 };
253
254 module_i2c_driver(axp20x_i2c_driver);
255
256 MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
257 MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
258 MODULE_LICENSE("GPL");