2 * Atmel MultiMedia Card Interface driver
4 * Copyright (C) 2004-2008 Atmel Corporation
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 #include <linux/blkdev.h>
11 #include <linux/clk.h>
12 #include <linux/debugfs.h>
13 #include <linux/device.h>
14 #include <linux/dmaengine.h>
15 #include <linux/dma-mapping.h>
16 #include <linux/err.h>
17 #include <linux/gpio.h>
18 #include <linux/init.h>
19 #include <linux/interrupt.h>
20 #include <linux/ioport.h>
21 #include <linux/module.h>
22 #include <linux/platform_device.h>
23 #include <linux/scatterlist.h>
24 #include <linux/seq_file.h>
25 #include <linux/slab.h>
26 #include <linux/stat.h>
27 #include <linux/types.h>
29 #include <linux/mmc/host.h>
30 #include <linux/mmc/sdio.h>
32 #include <mach/atmel-mci.h>
33 #include <linux/atmel-mci.h>
34 #include <linux/atmel_pdc.h>
37 #include <asm/unaligned.h>
40 #include <mach/board.h>
42 #include "atmel-mci-regs.h"
44 #define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
45 #define ATMCI_DMA_THRESHOLD 16
54 enum atmel_mci_state {
58 STATE_WAITING_NOTBUSY,
73 struct atmel_mci_caps {
81 bool has_bad_data_ordering;
82 bool need_reset_after_xfer;
83 bool need_blksz_mul_4;
86 struct atmel_mci_dma {
87 struct dma_chan *chan;
88 struct dma_async_tx_descriptor *data_desc;
92 * struct atmel_mci - MMC controller state shared between all slots
93 * @lock: Spinlock protecting the queue and associated data.
94 * @regs: Pointer to MMIO registers.
95 * @sg: Scatterlist entry currently being processed by PIO or PDC code.
96 * @pio_offset: Offset into the current scatterlist entry.
97 * @buffer: Buffer used if we don't have the r/w proof capability. We
98 * don't have the time to switch pdc buffers so we have to use only
99 * one buffer for the full transaction.
100 * @buf_size: size of the buffer.
101 * @phys_buf_addr: buffer address needed for pdc.
102 * @cur_slot: The slot which is currently using the controller.
103 * @mrq: The request currently being processed on @cur_slot,
104 * or NULL if the controller is idle.
105 * @cmd: The command currently being sent to the card, or NULL.
106 * @data: The data currently being transferred, or NULL if no data
107 * transfer is in progress.
108 * @data_size: just data->blocks * data->blksz.
109 * @dma: DMA client state.
110 * @data_chan: DMA channel being used for the current data transfer.
111 * @cmd_status: Snapshot of SR taken upon completion of the current
112 * command. Only valid when EVENT_CMD_COMPLETE is pending.
113 * @data_status: Snapshot of SR taken upon completion of the current
114 * data transfer. Only valid when EVENT_DATA_COMPLETE or
115 * EVENT_DATA_ERROR is pending.
116 * @stop_cmdr: Value to be loaded into CMDR when the stop command is
118 * @tasklet: Tasklet running the request state machine.
119 * @pending_events: Bitmask of events flagged by the interrupt handler
120 * to be processed by the tasklet.
121 * @completed_events: Bitmask of events which the state machine has
123 * @state: Tasklet state.
124 * @queue: List of slots waiting for access to the controller.
125 * @need_clock_update: Update the clock rate before the next request.
126 * @need_reset: Reset controller before next request.
127 * @timer: Timer to balance the data timeout error flag which cannot rise.
128 * @mode_reg: Value of the MR register.
129 * @cfg_reg: Value of the CFG register.
130 * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
131 * rate and timeout calculations.
132 * @mapbase: Physical address of the MMIO registers.
133 * @mck: The peripheral bus clock hooked up to the MMC controller.
134 * @pdev: Platform device associated with the MMC controller.
135 * @slot: Slots sharing this MMC controller.
136 * @caps: MCI capabilities depending on MCI version.
137 * @prepare_data: function to setup MCI before data transfer which
138 * depends on MCI capabilities.
139 * @submit_data: function to start data transfer which depends on MCI
141 * @stop_transfer: function to stop data transfer which depends on MCI
147 * @lock is a softirq-safe spinlock protecting @queue as well as
148 * @cur_slot, @mrq and @state. These must always be updated
149 * at the same time while holding @lock.
151 * @lock also protects mode_reg and need_clock_update since these are
152 * used to synchronize mode register updates with the queue
155 * The @mrq field of struct atmel_mci_slot is also protected by @lock,
156 * and must always be written at the same time as the slot is added to
159 * @pending_events and @completed_events are accessed using atomic bit
160 * operations, so they don't need any locking.
162 * None of the fields touched by the interrupt handler need any
163 * locking. However, ordering is important: Before EVENT_DATA_ERROR or
164 * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
165 * interrupts must be disabled and @data_status updated with a
166 * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
167 * CMDRDY interrupt must be disabled and @cmd_status updated with a
168 * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
169 * bytes_xfered field of @data must be written. This is ensured by
176 struct scatterlist *sg;
177 unsigned int pio_offset;
178 unsigned int *buffer;
179 unsigned int buf_size;
180 dma_addr_t buf_phys_addr;
182 struct atmel_mci_slot *cur_slot;
183 struct mmc_request *mrq;
184 struct mmc_command *cmd;
185 struct mmc_data *data;
186 unsigned int data_size;
188 struct atmel_mci_dma dma;
189 struct dma_chan *data_chan;
190 struct dma_slave_config dma_conf;
196 struct tasklet_struct tasklet;
197 unsigned long pending_events;
198 unsigned long completed_events;
199 enum atmel_mci_state state;
200 struct list_head queue;
202 bool need_clock_update;
204 struct timer_list timer;
207 unsigned long bus_hz;
208 unsigned long mapbase;
210 struct platform_device *pdev;
212 struct atmel_mci_slot *slot[ATMCI_MAX_NR_SLOTS];
214 struct atmel_mci_caps caps;
216 u32 (*prepare_data)(struct atmel_mci *host, struct mmc_data *data);
217 void (*submit_data)(struct atmel_mci *host, struct mmc_data *data);
218 void (*stop_transfer)(struct atmel_mci *host);
222 * struct atmel_mci_slot - MMC slot state
223 * @mmc: The mmc_host representing this slot.
224 * @host: The MMC controller this slot is using.
225 * @sdc_reg: Value of SDCR to be written before using this slot.
226 * @sdio_irq: SDIO irq mask for this slot.
227 * @mrq: mmc_request currently being processed or waiting to be
228 * processed, or NULL when the slot is idle.
229 * @queue_node: List node for placing this node in the @queue list of
231 * @clock: Clock rate configured by set_ios(). Protected by host->lock.
232 * @flags: Random state bits associated with the slot.
233 * @detect_pin: GPIO pin used for card detection, or negative if not
235 * @wp_pin: GPIO pin used for card write protect sending, or negative
237 * @detect_is_active_high: The state of the detect pin when it is active.
238 * @detect_timer: Timer used for debouncing @detect_pin interrupts.
240 struct atmel_mci_slot {
241 struct mmc_host *mmc;
242 struct atmel_mci *host;
247 struct mmc_request *mrq;
248 struct list_head queue_node;
252 #define ATMCI_CARD_PRESENT 0
253 #define ATMCI_CARD_NEED_INIT 1
254 #define ATMCI_SHUTDOWN 2
255 #define ATMCI_SUSPENDED 3
259 bool detect_is_active_high;
261 struct timer_list detect_timer;
264 #define atmci_test_and_clear_pending(host, event) \
265 test_and_clear_bit(event, &host->pending_events)
266 #define atmci_set_completed(host, event) \
267 set_bit(event, &host->completed_events)
268 #define atmci_set_pending(host, event) \
269 set_bit(event, &host->pending_events)
272 * The debugfs stuff below is mostly optimized away when
273 * CONFIG_DEBUG_FS is not set.
275 static int atmci_req_show(struct seq_file *s, void *v)
277 struct atmel_mci_slot *slot = s->private;
278 struct mmc_request *mrq;
279 struct mmc_command *cmd;
280 struct mmc_command *stop;
281 struct mmc_data *data;
283 /* Make sure we get a consistent snapshot */
284 spin_lock_bh(&slot->host->lock);
294 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
295 cmd->opcode, cmd->arg, cmd->flags,
296 cmd->resp[0], cmd->resp[1], cmd->resp[2],
297 cmd->resp[3], cmd->error);
299 seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
300 data->bytes_xfered, data->blocks,
301 data->blksz, data->flags, data->error);
304 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
305 stop->opcode, stop->arg, stop->flags,
306 stop->resp[0], stop->resp[1], stop->resp[2],
307 stop->resp[3], stop->error);
310 spin_unlock_bh(&slot->host->lock);
315 static int atmci_req_open(struct inode *inode, struct file *file)
317 return single_open(file, atmci_req_show, inode->i_private);
320 static const struct file_operations atmci_req_fops = {
321 .owner = THIS_MODULE,
322 .open = atmci_req_open,
325 .release = single_release,
328 static void atmci_show_status_reg(struct seq_file *s,
329 const char *regname, u32 value)
331 static const char *sr_bit[] = {
362 seq_printf(s, "%s:\t0x%08x", regname, value);
363 for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
364 if (value & (1 << i)) {
366 seq_printf(s, " %s", sr_bit[i]);
368 seq_puts(s, " UNKNOWN");
374 static int atmci_regs_show(struct seq_file *s, void *v)
376 struct atmel_mci *host = s->private;
379 buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL);
384 * Grab a more or less consistent snapshot. Note that we're
385 * not disabling interrupts, so IMR and SR may not be
388 spin_lock_bh(&host->lock);
389 clk_enable(host->mck);
390 memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
391 clk_disable(host->mck);
392 spin_unlock_bh(&host->lock);
394 seq_printf(s, "MR:\t0x%08x%s%s ",
396 buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "",
397 buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "");
398 if (host->caps.has_odd_clk_div)
399 seq_printf(s, "{CLKDIV,CLKODD}=%u\n",
400 ((buf[ATMCI_MR / 4] & 0xff) << 1)
401 | ((buf[ATMCI_MR / 4] >> 16) & 1));
403 seq_printf(s, "CLKDIV=%u\n",
404 (buf[ATMCI_MR / 4] & 0xff));
405 seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]);
406 seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]);
407 seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]);
408 seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
410 buf[ATMCI_BLKR / 4] & 0xffff,
411 (buf[ATMCI_BLKR / 4] >> 16) & 0xffff);
412 if (host->caps.has_cstor_reg)
413 seq_printf(s, "CSTOR:\t0x%08x\n", buf[ATMCI_CSTOR / 4]);
415 /* Don't read RSPR and RDR; it will consume the data there */
417 atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]);
418 atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]);
420 if (host->caps.has_dma) {
423 val = buf[ATMCI_DMA / 4];
424 seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n",
427 1 << (((val >> 4) & 3) + 1) : 1,
428 val & ATMCI_DMAEN ? " DMAEN" : "");
430 if (host->caps.has_cfg_reg) {
433 val = buf[ATMCI_CFG / 4];
434 seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n",
436 val & ATMCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "",
437 val & ATMCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "",
438 val & ATMCI_CFG_HSMODE ? " HSMODE" : "",
439 val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
447 static int atmci_regs_open(struct inode *inode, struct file *file)
449 return single_open(file, atmci_regs_show, inode->i_private);
452 static const struct file_operations atmci_regs_fops = {
453 .owner = THIS_MODULE,
454 .open = atmci_regs_open,
457 .release = single_release,
460 static void atmci_init_debugfs(struct atmel_mci_slot *slot)
462 struct mmc_host *mmc = slot->mmc;
463 struct atmel_mci *host = slot->host;
467 root = mmc->debugfs_root;
471 node = debugfs_create_file("regs", S_IRUSR, root, host,
478 node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops);
482 node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
486 node = debugfs_create_x32("pending_events", S_IRUSR, root,
487 (u32 *)&host->pending_events);
491 node = debugfs_create_x32("completed_events", S_IRUSR, root,
492 (u32 *)&host->completed_events);
499 dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
502 static inline unsigned int atmci_get_version(struct atmel_mci *host)
504 return atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
507 static void atmci_timeout_timer(unsigned long data)
509 struct atmel_mci *host;
511 host = (struct atmel_mci *)data;
513 dev_dbg(&host->pdev->dev, "software timeout\n");
515 if (host->mrq->cmd->data) {
516 host->mrq->cmd->data->error = -ETIMEDOUT;
519 host->mrq->cmd->error = -ETIMEDOUT;
522 host->need_reset = 1;
523 host->state = STATE_END_REQUEST;
525 tasklet_schedule(&host->tasklet);
528 static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host,
532 * It is easier here to use us instead of ns for the timeout,
533 * it prevents from overflows during calculation.
535 unsigned int us = DIV_ROUND_UP(ns, 1000);
537 /* Maximum clock frequency is host->bus_hz/2 */
538 return us * (DIV_ROUND_UP(host->bus_hz, 2000000));
541 static void atmci_set_timeout(struct atmel_mci *host,
542 struct atmel_mci_slot *slot, struct mmc_data *data)
544 static unsigned dtomul_to_shift[] = {
545 0, 4, 7, 8, 10, 12, 16, 20
551 timeout = atmci_ns_to_clocks(host, data->timeout_ns)
552 + data->timeout_clks;
554 for (dtomul = 0; dtomul < 8; dtomul++) {
555 unsigned shift = dtomul_to_shift[dtomul];
556 dtocyc = (timeout + (1 << shift) - 1) >> shift;
566 dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
567 dtocyc << dtomul_to_shift[dtomul]);
568 atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc)));
572 * Return mask with command flags to be enabled for this command.
574 static u32 atmci_prepare_command(struct mmc_host *mmc,
575 struct mmc_command *cmd)
577 struct mmc_data *data;
580 cmd->error = -EINPROGRESS;
582 cmdr = ATMCI_CMDR_CMDNB(cmd->opcode);
584 if (cmd->flags & MMC_RSP_PRESENT) {
585 if (cmd->flags & MMC_RSP_136)
586 cmdr |= ATMCI_CMDR_RSPTYP_136BIT;
588 cmdr |= ATMCI_CMDR_RSPTYP_48BIT;
592 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
593 * it's too difficult to determine whether this is an ACMD or
594 * not. Better make it 64.
596 cmdr |= ATMCI_CMDR_MAXLAT_64CYC;
598 if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
599 cmdr |= ATMCI_CMDR_OPDCMD;
603 cmdr |= ATMCI_CMDR_START_XFER;
605 if (cmd->opcode == SD_IO_RW_EXTENDED) {
606 cmdr |= ATMCI_CMDR_SDIO_BLOCK;
608 if (data->flags & MMC_DATA_STREAM)
609 cmdr |= ATMCI_CMDR_STREAM;
610 else if (data->blocks > 1)
611 cmdr |= ATMCI_CMDR_MULTI_BLOCK;
613 cmdr |= ATMCI_CMDR_BLOCK;
616 if (data->flags & MMC_DATA_READ)
617 cmdr |= ATMCI_CMDR_TRDIR_READ;
623 static void atmci_send_command(struct atmel_mci *host,
624 struct mmc_command *cmd, u32 cmd_flags)
629 dev_vdbg(&host->pdev->dev,
630 "start command: ARGR=0x%08x CMDR=0x%08x\n",
631 cmd->arg, cmd_flags);
633 atmci_writel(host, ATMCI_ARGR, cmd->arg);
634 atmci_writel(host, ATMCI_CMDR, cmd_flags);
637 static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
639 dev_dbg(&host->pdev->dev, "send stop command\n");
640 atmci_send_command(host, data->stop, host->stop_cmdr);
641 atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
645 * Configure given PDC buffer taking care of alignement issues.
646 * Update host->data_size and host->sg.
648 static void atmci_pdc_set_single_buf(struct atmel_mci *host,
649 enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb)
651 u32 pointer_reg, counter_reg;
652 unsigned int buf_size;
654 if (dir == XFER_RECEIVE) {
655 pointer_reg = ATMEL_PDC_RPR;
656 counter_reg = ATMEL_PDC_RCR;
658 pointer_reg = ATMEL_PDC_TPR;
659 counter_reg = ATMEL_PDC_TCR;
662 if (buf_nb == PDC_SECOND_BUF) {
663 pointer_reg += ATMEL_PDC_SCND_BUF_OFF;
664 counter_reg += ATMEL_PDC_SCND_BUF_OFF;
667 if (!host->caps.has_rwproof) {
668 buf_size = host->buf_size;
669 atmci_writel(host, pointer_reg, host->buf_phys_addr);
671 buf_size = sg_dma_len(host->sg);
672 atmci_writel(host, pointer_reg, sg_dma_address(host->sg));
675 if (host->data_size <= buf_size) {
676 if (host->data_size & 0x3) {
677 /* If size is different from modulo 4, transfer bytes */
678 atmci_writel(host, counter_reg, host->data_size);
679 atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCFBYTE);
681 /* Else transfer 32-bits words */
682 atmci_writel(host, counter_reg, host->data_size / 4);
686 /* We assume the size of a page is 32-bits aligned */
687 atmci_writel(host, counter_reg, sg_dma_len(host->sg) / 4);
688 host->data_size -= sg_dma_len(host->sg);
690 host->sg = sg_next(host->sg);
695 * Configure PDC buffer according to the data size ie configuring one or two
696 * buffers. Don't use this function if you want to configure only the second
697 * buffer. In this case, use atmci_pdc_set_single_buf.
699 static void atmci_pdc_set_both_buf(struct atmel_mci *host, int dir)
701 atmci_pdc_set_single_buf(host, dir, PDC_FIRST_BUF);
703 atmci_pdc_set_single_buf(host, dir, PDC_SECOND_BUF);
707 * Unmap sg lists, called when transfer is finished.
709 static void atmci_pdc_cleanup(struct atmel_mci *host)
711 struct mmc_data *data = host->data;
714 dma_unmap_sg(&host->pdev->dev,
715 data->sg, data->sg_len,
716 ((data->flags & MMC_DATA_WRITE)
717 ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
721 * Disable PDC transfers. Update pending flags to EVENT_XFER_COMPLETE after
722 * having received ATMCI_TXBUFE or ATMCI_RXBUFF interrupt. Enable ATMCI_NOTBUSY
723 * interrupt needed for both transfer directions.
725 static void atmci_pdc_complete(struct atmel_mci *host)
727 int transfer_size = host->data->blocks * host->data->blksz;
730 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
732 if ((!host->caps.has_rwproof)
733 && (host->data->flags & MMC_DATA_READ)) {
734 if (host->caps.has_bad_data_ordering)
735 for (i = 0; i < transfer_size; i++)
736 host->buffer[i] = swab32(host->buffer[i]);
737 sg_copy_from_buffer(host->data->sg, host->data->sg_len,
738 host->buffer, transfer_size);
741 atmci_pdc_cleanup(host);
744 * If the card was removed, data will be NULL. No point trying
745 * to send the stop command or waiting for NBUSY in this case.
748 dev_dbg(&host->pdev->dev,
749 "(%s) set pending xfer complete\n", __func__);
750 atmci_set_pending(host, EVENT_XFER_COMPLETE);
751 tasklet_schedule(&host->tasklet);
755 static void atmci_dma_cleanup(struct atmel_mci *host)
757 struct mmc_data *data = host->data;
760 dma_unmap_sg(host->dma.chan->device->dev,
761 data->sg, data->sg_len,
762 ((data->flags & MMC_DATA_WRITE)
763 ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
767 * This function is called by the DMA driver from tasklet context.
769 static void atmci_dma_complete(void *arg)
771 struct atmel_mci *host = arg;
772 struct mmc_data *data = host->data;
774 dev_vdbg(&host->pdev->dev, "DMA complete\n");
776 if (host->caps.has_dma)
777 /* Disable DMA hardware handshaking on MCI */
778 atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN);
780 atmci_dma_cleanup(host);
783 * If the card was removed, data will be NULL. No point trying
784 * to send the stop command or waiting for NBUSY in this case.
787 dev_dbg(&host->pdev->dev,
788 "(%s) set pending xfer complete\n", __func__);
789 atmci_set_pending(host, EVENT_XFER_COMPLETE);
790 tasklet_schedule(&host->tasklet);
793 * Regardless of what the documentation says, we have
794 * to wait for NOTBUSY even after block read
797 * When the DMA transfer is complete, the controller
798 * may still be reading the CRC from the card, i.e.
799 * the data transfer is still in progress and we
800 * haven't seen all the potential error bits yet.
802 * The interrupt handler will schedule a different
803 * tasklet to finish things up when the data transfer
804 * is completely done.
806 * We may not complete the mmc request here anyway
807 * because the mmc layer may call back and cause us to
808 * violate the "don't submit new operations from the
809 * completion callback" rule of the dma engine
812 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
817 * Returns a mask of interrupt flags to be enabled after the whole
818 * request has been prepared.
820 static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data)
824 data->error = -EINPROGRESS;
828 host->data_chan = NULL;
830 iflags = ATMCI_DATA_ERROR_FLAGS;
833 * Errata: MMC data write operation with less than 12
834 * bytes is impossible.
836 * Errata: MCI Transmit Data Register (TDR) FIFO
837 * corruption when length is not multiple of 4.
839 if (data->blocks * data->blksz < 12
840 || (data->blocks * data->blksz) & 3)
841 host->need_reset = true;
843 host->pio_offset = 0;
844 if (data->flags & MMC_DATA_READ)
845 iflags |= ATMCI_RXRDY;
847 iflags |= ATMCI_TXRDY;
853 * Set interrupt flags and set block length into the MCI mode register even
854 * if this value is also accessible in the MCI block register. It seems to be
855 * necessary before the High Speed MCI version. It also map sg and configure
859 atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data)
863 enum dma_data_direction dir;
866 data->error = -EINPROGRESS;
870 iflags = ATMCI_DATA_ERROR_FLAGS;
872 /* Enable pdc mode */
873 atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCMODE);
875 if (data->flags & MMC_DATA_READ) {
876 dir = DMA_FROM_DEVICE;
877 iflags |= ATMCI_ENDRX | ATMCI_RXBUFF;
880 iflags |= ATMCI_ENDTX | ATMCI_TXBUFE | ATMCI_BLKE;
884 tmp = atmci_readl(host, ATMCI_MR);
886 tmp |= ATMCI_BLKLEN(data->blksz);
887 atmci_writel(host, ATMCI_MR, tmp);
890 host->data_size = data->blocks * data->blksz;
891 sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir);
893 if ((!host->caps.has_rwproof)
894 && (host->data->flags & MMC_DATA_WRITE)) {
895 sg_copy_to_buffer(host->data->sg, host->data->sg_len,
896 host->buffer, host->data_size);
897 if (host->caps.has_bad_data_ordering)
898 for (i = 0; i < host->data_size; i++)
899 host->buffer[i] = swab32(host->buffer[i]);
903 atmci_pdc_set_both_buf(host,
904 ((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT));
910 atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
912 struct dma_chan *chan;
913 struct dma_async_tx_descriptor *desc;
914 struct scatterlist *sg;
916 enum dma_data_direction direction;
917 enum dma_transfer_direction slave_dirn;
922 data->error = -EINPROGRESS;
928 iflags = ATMCI_DATA_ERROR_FLAGS;
931 * We don't do DMA on "complex" transfers, i.e. with
932 * non-word-aligned buffers or lengths. Also, we don't bother
933 * with all the DMA setup overhead for short transfers.
935 if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD)
936 return atmci_prepare_data(host, data);
938 return atmci_prepare_data(host, data);
940 for_each_sg(data->sg, sg, data->sg_len, i) {
941 if (sg->offset & 3 || sg->length & 3)
942 return atmci_prepare_data(host, data);
945 /* If we don't have a channel, we can't do DMA */
946 chan = host->dma.chan;
948 host->data_chan = chan;
953 if (data->flags & MMC_DATA_READ) {
954 direction = DMA_FROM_DEVICE;
955 host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
956 maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
958 direction = DMA_TO_DEVICE;
959 host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
960 maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
963 atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN);
965 sglen = dma_map_sg(chan->device->dev, data->sg,
966 data->sg_len, direction);
968 dmaengine_slave_config(chan, &host->dma_conf);
969 desc = dmaengine_prep_slave_sg(chan,
970 data->sg, sglen, slave_dirn,
971 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
975 host->dma.data_desc = desc;
976 desc->callback = atmci_dma_complete;
977 desc->callback_param = host;
981 dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, direction);
986 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data)
992 * Start PDC according to transfer direction.
995 atmci_submit_data_pdc(struct atmel_mci *host, struct mmc_data *data)
997 if (data->flags & MMC_DATA_READ)
998 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
1000 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
1004 atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
1006 struct dma_chan *chan = host->data_chan;
1007 struct dma_async_tx_descriptor *desc = host->dma.data_desc;
1010 dmaengine_submit(desc);
1011 dma_async_issue_pending(chan);
1015 static void atmci_stop_transfer(struct atmel_mci *host)
1017 dev_dbg(&host->pdev->dev,
1018 "(%s) set pending xfer complete\n", __func__);
1019 atmci_set_pending(host, EVENT_XFER_COMPLETE);
1020 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1024 * Stop data transfer because error(s) occured.
1026 static void atmci_stop_transfer_pdc(struct atmel_mci *host)
1028 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
1031 static void atmci_stop_transfer_dma(struct atmel_mci *host)
1033 struct dma_chan *chan = host->data_chan;
1036 dmaengine_terminate_all(chan);
1037 atmci_dma_cleanup(host);
1039 /* Data transfer was stopped by the interrupt handler */
1040 dev_dbg(&host->pdev->dev,
1041 "(%s) set pending xfer complete\n", __func__);
1042 atmci_set_pending(host, EVENT_XFER_COMPLETE);
1043 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1048 * Start a request: prepare data if needed, prepare the command and activate
1051 static void atmci_start_request(struct atmel_mci *host,
1052 struct atmel_mci_slot *slot)
1054 struct mmc_request *mrq;
1055 struct mmc_command *cmd;
1056 struct mmc_data *data;
1061 host->cur_slot = slot;
1064 host->pending_events = 0;
1065 host->completed_events = 0;
1066 host->cmd_status = 0;
1067 host->data_status = 0;
1069 dev_dbg(&host->pdev->dev, "start request: cmd %u\n", mrq->cmd->opcode);
1071 if (host->need_reset || host->caps.need_reset_after_xfer) {
1072 iflags = atmci_readl(host, ATMCI_IMR);
1073 iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB);
1074 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
1075 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
1076 atmci_writel(host, ATMCI_MR, host->mode_reg);
1077 if (host->caps.has_cfg_reg)
1078 atmci_writel(host, ATMCI_CFG, host->cfg_reg);
1079 atmci_writel(host, ATMCI_IER, iflags);
1080 host->need_reset = false;
1082 atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);
1084 iflags = atmci_readl(host, ATMCI_IMR);
1085 if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
1086 dev_dbg(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
1089 if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) {
1090 /* Send init sequence (74 clock cycles) */
1091 atmci_writel(host, ATMCI_CMDR, ATMCI_CMDR_SPCMD_INIT);
1092 while (!(atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY))
1098 atmci_set_timeout(host, slot, data);
1100 /* Must set block count/size before sending command */
1101 atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(data->blocks)
1102 | ATMCI_BLKLEN(data->blksz));
1103 dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
1104 ATMCI_BCNT(data->blocks) | ATMCI_BLKLEN(data->blksz));
1106 iflags |= host->prepare_data(host, data);
1109 iflags |= ATMCI_CMDRDY;
1111 cmdflags = atmci_prepare_command(slot->mmc, cmd);
1112 atmci_send_command(host, cmd, cmdflags);
1115 host->submit_data(host, data);
1118 host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
1119 host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;
1120 if (!(data->flags & MMC_DATA_WRITE))
1121 host->stop_cmdr |= ATMCI_CMDR_TRDIR_READ;
1122 if (data->flags & MMC_DATA_STREAM)
1123 host->stop_cmdr |= ATMCI_CMDR_STREAM;
1125 host->stop_cmdr |= ATMCI_CMDR_MULTI_BLOCK;
1129 * We could have enabled interrupts earlier, but I suspect
1130 * that would open up a nice can of interesting race
1131 * conditions (e.g. command and data complete, but stop not
1134 atmci_writel(host, ATMCI_IER, iflags);
1136 mod_timer(&host->timer, jiffies + msecs_to_jiffies(2000));
1139 static void atmci_queue_request(struct atmel_mci *host,
1140 struct atmel_mci_slot *slot, struct mmc_request *mrq)
1142 dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
1145 spin_lock_bh(&host->lock);
1147 if (host->state == STATE_IDLE) {
1148 host->state = STATE_SENDING_CMD;
1149 atmci_start_request(host, slot);
1151 dev_dbg(&host->pdev->dev, "queue request\n");
1152 list_add_tail(&slot->queue_node, &host->queue);
1154 spin_unlock_bh(&host->lock);
1157 static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1159 struct atmel_mci_slot *slot = mmc_priv(mmc);
1160 struct atmel_mci *host = slot->host;
1161 struct mmc_data *data;
1164 dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode);
1167 * We may "know" the card is gone even though there's still an
1168 * electrical connection. If so, we really need to communicate
1169 * this to the MMC core since there won't be any more
1170 * interrupts as the card is completely removed. Otherwise,
1171 * the MMC core might believe the card is still there even
1172 * though the card was just removed very slowly.
1174 if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) {
1175 mrq->cmd->error = -ENOMEDIUM;
1176 mmc_request_done(mmc, mrq);
1180 /* We don't support multiple blocks of weird lengths. */
1182 if (data && data->blocks > 1 && data->blksz & 3) {
1183 mrq->cmd->error = -EINVAL;
1184 mmc_request_done(mmc, mrq);
1187 atmci_queue_request(host, slot, mrq);
1190 static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1192 struct atmel_mci_slot *slot = mmc_priv(mmc);
1193 struct atmel_mci *host = slot->host;
1196 slot->sdc_reg &= ~ATMCI_SDCBUS_MASK;
1197 switch (ios->bus_width) {
1198 case MMC_BUS_WIDTH_1:
1199 slot->sdc_reg |= ATMCI_SDCBUS_1BIT;
1201 case MMC_BUS_WIDTH_4:
1202 slot->sdc_reg |= ATMCI_SDCBUS_4BIT;
1207 unsigned int clock_min = ~0U;
1210 spin_lock_bh(&host->lock);
1211 if (!host->mode_reg) {
1212 clk_enable(host->mck);
1213 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
1214 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
1215 if (host->caps.has_cfg_reg)
1216 atmci_writel(host, ATMCI_CFG, host->cfg_reg);
1220 * Use mirror of ios->clock to prevent race with mmc
1221 * core ios update when finding the minimum.
1223 slot->clock = ios->clock;
1224 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
1225 if (host->slot[i] && host->slot[i]->clock
1226 && host->slot[i]->clock < clock_min)
1227 clock_min = host->slot[i]->clock;
1230 /* Calculate clock divider */
1231 if (host->caps.has_odd_clk_div) {
1232 clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2;
1234 dev_warn(&mmc->class_dev,
1235 "clock %u too slow; using %lu\n",
1236 clock_min, host->bus_hz / (511 + 2));
1239 host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1)
1240 | ATMCI_MR_CLKODD(clkdiv & 1);
1242 clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
1244 dev_warn(&mmc->class_dev,
1245 "clock %u too slow; using %lu\n",
1246 clock_min, host->bus_hz / (2 * 256));
1249 host->mode_reg = ATMCI_MR_CLKDIV(clkdiv);
1253 * WRPROOF and RDPROOF prevent overruns/underruns by
1254 * stopping the clock when the FIFO is full/empty.
1255 * This state is not expected to last for long.
1257 if (host->caps.has_rwproof)
1258 host->mode_reg |= (ATMCI_MR_WRPROOF | ATMCI_MR_RDPROOF);
1260 if (host->caps.has_cfg_reg) {
1261 /* setup High Speed mode in relation with card capacity */
1262 if (ios->timing == MMC_TIMING_SD_HS)
1263 host->cfg_reg |= ATMCI_CFG_HSMODE;
1265 host->cfg_reg &= ~ATMCI_CFG_HSMODE;
1268 if (list_empty(&host->queue)) {
1269 atmci_writel(host, ATMCI_MR, host->mode_reg);
1270 if (host->caps.has_cfg_reg)
1271 atmci_writel(host, ATMCI_CFG, host->cfg_reg);
1273 host->need_clock_update = true;
1276 spin_unlock_bh(&host->lock);
1278 bool any_slot_active = false;
1280 spin_lock_bh(&host->lock);
1282 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
1283 if (host->slot[i] && host->slot[i]->clock) {
1284 any_slot_active = true;
1288 if (!any_slot_active) {
1289 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
1290 if (host->mode_reg) {
1291 atmci_readl(host, ATMCI_MR);
1292 clk_disable(host->mck);
1296 spin_unlock_bh(&host->lock);
1299 switch (ios->power_mode) {
1301 set_bit(ATMCI_CARD_NEED_INIT, &slot->flags);
1305 * TODO: None of the currently available AVR32-based
1306 * boards allow MMC power to be turned off. Implement
1307 * power control when this can be tested properly.
1309 * We also need to hook this into the clock management
1310 * somehow so that newly inserted cards aren't
1311 * subjected to a fast clock before we have a chance
1312 * to figure out what the maximum rate is. Currently,
1313 * there's no way to avoid this, and there never will
1314 * be for boards that don't support power control.
1320 static int atmci_get_ro(struct mmc_host *mmc)
1322 int read_only = -ENOSYS;
1323 struct atmel_mci_slot *slot = mmc_priv(mmc);
1325 if (gpio_is_valid(slot->wp_pin)) {
1326 read_only = gpio_get_value(slot->wp_pin);
1327 dev_dbg(&mmc->class_dev, "card is %s\n",
1328 read_only ? "read-only" : "read-write");
1334 static int atmci_get_cd(struct mmc_host *mmc)
1336 int present = -ENOSYS;
1337 struct atmel_mci_slot *slot = mmc_priv(mmc);
1339 if (gpio_is_valid(slot->detect_pin)) {
1340 present = !(gpio_get_value(slot->detect_pin) ^
1341 slot->detect_is_active_high);
1342 dev_dbg(&mmc->class_dev, "card is %spresent\n",
1343 present ? "" : "not ");
1349 static void atmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1351 struct atmel_mci_slot *slot = mmc_priv(mmc);
1352 struct atmel_mci *host = slot->host;
1355 atmci_writel(host, ATMCI_IER, slot->sdio_irq);
1357 atmci_writel(host, ATMCI_IDR, slot->sdio_irq);
1360 static const struct mmc_host_ops atmci_ops = {
1361 .request = atmci_request,
1362 .set_ios = atmci_set_ios,
1363 .get_ro = atmci_get_ro,
1364 .get_cd = atmci_get_cd,
1365 .enable_sdio_irq = atmci_enable_sdio_irq,
1368 /* Called with host->lock held */
1369 static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
1370 __releases(&host->lock)
1371 __acquires(&host->lock)
1373 struct atmel_mci_slot *slot = NULL;
1374 struct mmc_host *prev_mmc = host->cur_slot->mmc;
1376 WARN_ON(host->cmd || host->data);
1379 * Update the MMC clock rate if necessary. This may be
1380 * necessary if set_ios() is called when a different slot is
1381 * busy transferring data.
1383 if (host->need_clock_update) {
1384 atmci_writel(host, ATMCI_MR, host->mode_reg);
1385 if (host->caps.has_cfg_reg)
1386 atmci_writel(host, ATMCI_CFG, host->cfg_reg);
1389 host->cur_slot->mrq = NULL;
1391 if (!list_empty(&host->queue)) {
1392 slot = list_entry(host->queue.next,
1393 struct atmel_mci_slot, queue_node);
1394 list_del(&slot->queue_node);
1395 dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n",
1396 mmc_hostname(slot->mmc));
1397 host->state = STATE_SENDING_CMD;
1398 atmci_start_request(host, slot);
1400 dev_vdbg(&host->pdev->dev, "list empty\n");
1401 host->state = STATE_IDLE;
1404 del_timer(&host->timer);
1406 spin_unlock(&host->lock);
1407 mmc_request_done(prev_mmc, mrq);
1408 spin_lock(&host->lock);
1411 static void atmci_command_complete(struct atmel_mci *host,
1412 struct mmc_command *cmd)
1414 u32 status = host->cmd_status;
1416 /* Read the response from the card (up to 16 bytes) */
1417 cmd->resp[0] = atmci_readl(host, ATMCI_RSPR);
1418 cmd->resp[1] = atmci_readl(host, ATMCI_RSPR);
1419 cmd->resp[2] = atmci_readl(host, ATMCI_RSPR);
1420 cmd->resp[3] = atmci_readl(host, ATMCI_RSPR);
1422 if (status & ATMCI_RTOE)
1423 cmd->error = -ETIMEDOUT;
1424 else if ((cmd->flags & MMC_RSP_CRC) && (status & ATMCI_RCRCE))
1425 cmd->error = -EILSEQ;
1426 else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE))
1428 else if (host->mrq->data && (host->mrq->data->blksz & 3)) {
1429 if (host->caps.need_blksz_mul_4) {
1430 cmd->error = -EINVAL;
1431 host->need_reset = 1;
1437 static void atmci_detect_change(unsigned long data)
1439 struct atmel_mci_slot *slot = (struct atmel_mci_slot *)data;
1444 * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before
1445 * freeing the interrupt. We must not re-enable the interrupt
1446 * if it has been freed, and if we're shutting down, it
1447 * doesn't really matter whether the card is present or not.
1450 if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
1453 enable_irq(gpio_to_irq(slot->detect_pin));
1454 present = !(gpio_get_value(slot->detect_pin) ^
1455 slot->detect_is_active_high);
1456 present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
1458 dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
1459 present, present_old);
1461 if (present != present_old) {
1462 struct atmel_mci *host = slot->host;
1463 struct mmc_request *mrq;
1465 dev_dbg(&slot->mmc->class_dev, "card %s\n",
1466 present ? "inserted" : "removed");
1468 spin_lock(&host->lock);
1471 clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
1473 set_bit(ATMCI_CARD_PRESENT, &slot->flags);
1475 /* Clean up queue if present */
1478 if (mrq == host->mrq) {
1480 * Reset controller to terminate any ongoing
1481 * commands or data transfers.
1483 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
1484 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
1485 atmci_writel(host, ATMCI_MR, host->mode_reg);
1486 if (host->caps.has_cfg_reg)
1487 atmci_writel(host, ATMCI_CFG, host->cfg_reg);
1492 switch (host->state) {
1495 case STATE_SENDING_CMD:
1496 mrq->cmd->error = -ENOMEDIUM;
1498 host->stop_transfer(host);
1500 case STATE_DATA_XFER:
1501 mrq->data->error = -ENOMEDIUM;
1502 host->stop_transfer(host);
1504 case STATE_WAITING_NOTBUSY:
1505 mrq->data->error = -ENOMEDIUM;
1507 case STATE_SENDING_STOP:
1508 mrq->stop->error = -ENOMEDIUM;
1510 case STATE_END_REQUEST:
1514 atmci_request_end(host, mrq);
1516 list_del(&slot->queue_node);
1517 mrq->cmd->error = -ENOMEDIUM;
1519 mrq->data->error = -ENOMEDIUM;
1521 mrq->stop->error = -ENOMEDIUM;
1523 spin_unlock(&host->lock);
1524 mmc_request_done(slot->mmc, mrq);
1525 spin_lock(&host->lock);
1528 spin_unlock(&host->lock);
1530 mmc_detect_change(slot->mmc, 0);
1534 static void atmci_tasklet_func(unsigned long priv)
1536 struct atmel_mci *host = (struct atmel_mci *)priv;
1537 struct mmc_request *mrq = host->mrq;
1538 struct mmc_data *data = host->data;
1539 enum atmel_mci_state state = host->state;
1540 enum atmel_mci_state prev_state;
1543 spin_lock(&host->lock);
1545 state = host->state;
1547 dev_vdbg(&host->pdev->dev,
1548 "tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
1549 state, host->pending_events, host->completed_events,
1550 atmci_readl(host, ATMCI_IMR));
1554 dev_dbg(&host->pdev->dev, "FSM: state=%d\n", state);
1560 case STATE_SENDING_CMD:
1562 * Command has been sent, we are waiting for command
1563 * ready. Then we have three next states possible:
1564 * END_REQUEST by default, WAITING_NOTBUSY if it's a
1565 * command needing it or DATA_XFER if there is data.
1567 dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n");
1568 if (!atmci_test_and_clear_pending(host,
1572 dev_dbg(&host->pdev->dev, "set completed cmd ready\n");
1574 atmci_set_completed(host, EVENT_CMD_RDY);
1575 atmci_command_complete(host, mrq->cmd);
1577 dev_dbg(&host->pdev->dev,
1578 "command with data transfer");
1580 * If there is a command error don't start
1583 if (mrq->cmd->error) {
1584 host->stop_transfer(host);
1586 atmci_writel(host, ATMCI_IDR,
1587 ATMCI_TXRDY | ATMCI_RXRDY
1588 | ATMCI_DATA_ERROR_FLAGS);
1589 state = STATE_END_REQUEST;
1591 state = STATE_DATA_XFER;
1592 } else if ((!mrq->data) && (mrq->cmd->flags & MMC_RSP_BUSY)) {
1593 dev_dbg(&host->pdev->dev,
1594 "command response need waiting notbusy");
1595 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1596 state = STATE_WAITING_NOTBUSY;
1598 state = STATE_END_REQUEST;
1602 case STATE_DATA_XFER:
1603 if (atmci_test_and_clear_pending(host,
1604 EVENT_DATA_ERROR)) {
1605 dev_dbg(&host->pdev->dev, "set completed data error\n");
1606 atmci_set_completed(host, EVENT_DATA_ERROR);
1607 state = STATE_END_REQUEST;
1612 * A data transfer is in progress. The event expected
1613 * to move to the next state depends of data transfer
1614 * type (PDC or DMA). Once transfer done we can move
1615 * to the next step which is WAITING_NOTBUSY in write
1616 * case and directly SENDING_STOP in read case.
1618 dev_dbg(&host->pdev->dev, "FSM: xfer complete?\n");
1619 if (!atmci_test_and_clear_pending(host,
1620 EVENT_XFER_COMPLETE))
1623 dev_dbg(&host->pdev->dev,
1624 "(%s) set completed xfer complete\n",
1626 atmci_set_completed(host, EVENT_XFER_COMPLETE);
1628 if (host->data->flags & MMC_DATA_WRITE) {
1629 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1630 state = STATE_WAITING_NOTBUSY;
1631 } else if (host->mrq->stop) {
1632 atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
1633 atmci_send_stop_cmd(host, data);
1634 state = STATE_SENDING_STOP;
1637 data->bytes_xfered = data->blocks * data->blksz;
1639 state = STATE_END_REQUEST;
1643 case STATE_WAITING_NOTBUSY:
1645 * We can be in the state for two reasons: a command
1646 * requiring waiting not busy signal (stop command
1647 * included) or a write operation. In the latest case,
1648 * we need to send a stop command.
1650 dev_dbg(&host->pdev->dev, "FSM: not busy?\n");
1651 if (!atmci_test_and_clear_pending(host,
1655 dev_dbg(&host->pdev->dev, "set completed not busy\n");
1656 atmci_set_completed(host, EVENT_NOTBUSY);
1660 * For some commands such as CMD53, even if
1661 * there is data transfer, there is no stop
1664 if (host->mrq->stop) {
1665 atmci_writel(host, ATMCI_IER,
1667 atmci_send_stop_cmd(host, data);
1668 state = STATE_SENDING_STOP;
1671 data->bytes_xfered = data->blocks
1674 state = STATE_END_REQUEST;
1677 state = STATE_END_REQUEST;
1680 case STATE_SENDING_STOP:
1682 * In this state, it is important to set host->data to
1683 * NULL (which is tested in the waiting notbusy state)
1684 * in order to go to the end request state instead of
1685 * sending stop again.
1687 dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n");
1688 if (!atmci_test_and_clear_pending(host,
1692 dev_dbg(&host->pdev->dev, "FSM: cmd ready\n");
1694 data->bytes_xfered = data->blocks * data->blksz;
1696 atmci_command_complete(host, mrq->stop);
1697 if (mrq->stop->error) {
1698 host->stop_transfer(host);
1699 atmci_writel(host, ATMCI_IDR,
1700 ATMCI_TXRDY | ATMCI_RXRDY
1701 | ATMCI_DATA_ERROR_FLAGS);
1702 state = STATE_END_REQUEST;
1704 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1705 state = STATE_WAITING_NOTBUSY;
1710 case STATE_END_REQUEST:
1711 atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY | ATMCI_RXRDY
1712 | ATMCI_DATA_ERROR_FLAGS);
1713 status = host->data_status;
1714 if (unlikely(status)) {
1715 host->stop_transfer(host);
1717 if (status & ATMCI_DTOE) {
1718 data->error = -ETIMEDOUT;
1719 } else if (status & ATMCI_DCRCE) {
1720 data->error = -EILSEQ;
1726 atmci_request_end(host, host->mrq);
1730 } while (state != prev_state);
1732 host->state = state;
1734 spin_unlock(&host->lock);
1737 static void atmci_read_data_pio(struct atmel_mci *host)
1739 struct scatterlist *sg = host->sg;
1740 void *buf = sg_virt(sg);
1741 unsigned int offset = host->pio_offset;
1742 struct mmc_data *data = host->data;
1745 unsigned int nbytes = 0;
1748 value = atmci_readl(host, ATMCI_RDR);
1749 if (likely(offset + 4 <= sg->length)) {
1750 put_unaligned(value, (u32 *)(buf + offset));
1755 if (offset == sg->length) {
1756 flush_dcache_page(sg_page(sg));
1757 host->sg = sg = sg_next(sg);
1765 unsigned int remaining = sg->length - offset;
1766 memcpy(buf + offset, &value, remaining);
1767 nbytes += remaining;
1769 flush_dcache_page(sg_page(sg));
1770 host->sg = sg = sg_next(sg);
1774 offset = 4 - remaining;
1776 memcpy(buf, (u8 *)&value + remaining, offset);
1780 status = atmci_readl(host, ATMCI_SR);
1781 if (status & ATMCI_DATA_ERROR_FLAGS) {
1782 atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY
1783 | ATMCI_DATA_ERROR_FLAGS));
1784 host->data_status = status;
1785 data->bytes_xfered += nbytes;
1788 } while (status & ATMCI_RXRDY);
1790 host->pio_offset = offset;
1791 data->bytes_xfered += nbytes;
1796 atmci_writel(host, ATMCI_IDR, ATMCI_RXRDY);
1797 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1798 data->bytes_xfered += nbytes;
1800 atmci_set_pending(host, EVENT_XFER_COMPLETE);
1803 static void atmci_write_data_pio(struct atmel_mci *host)
1805 struct scatterlist *sg = host->sg;
1806 void *buf = sg_virt(sg);
1807 unsigned int offset = host->pio_offset;
1808 struct mmc_data *data = host->data;
1811 unsigned int nbytes = 0;
1814 if (likely(offset + 4 <= sg->length)) {
1815 value = get_unaligned((u32 *)(buf + offset));
1816 atmci_writel(host, ATMCI_TDR, value);
1820 if (offset == sg->length) {
1821 host->sg = sg = sg_next(sg);
1829 unsigned int remaining = sg->length - offset;
1832 memcpy(&value, buf + offset, remaining);
1833 nbytes += remaining;
1835 host->sg = sg = sg_next(sg);
1837 atmci_writel(host, ATMCI_TDR, value);
1841 offset = 4 - remaining;
1843 memcpy((u8 *)&value + remaining, buf, offset);
1844 atmci_writel(host, ATMCI_TDR, value);
1848 status = atmci_readl(host, ATMCI_SR);
1849 if (status & ATMCI_DATA_ERROR_FLAGS) {
1850 atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY
1851 | ATMCI_DATA_ERROR_FLAGS));
1852 host->data_status = status;
1853 data->bytes_xfered += nbytes;
1856 } while (status & ATMCI_TXRDY);
1858 host->pio_offset = offset;
1859 data->bytes_xfered += nbytes;
1864 atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY);
1865 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1866 data->bytes_xfered += nbytes;
1868 atmci_set_pending(host, EVENT_XFER_COMPLETE);
1871 static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status)
1875 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
1876 struct atmel_mci_slot *slot = host->slot[i];
1877 if (slot && (status & slot->sdio_irq)) {
1878 mmc_signal_sdio_irq(slot->mmc);
1884 static irqreturn_t atmci_interrupt(int irq, void *dev_id)
1886 struct atmel_mci *host = dev_id;
1887 u32 status, mask, pending;
1888 unsigned int pass_count = 0;
1891 status = atmci_readl(host, ATMCI_SR);
1892 mask = atmci_readl(host, ATMCI_IMR);
1893 pending = status & mask;
1897 if (pending & ATMCI_DATA_ERROR_FLAGS) {
1898 dev_dbg(&host->pdev->dev, "IRQ: data error\n");
1899 atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS
1900 | ATMCI_RXRDY | ATMCI_TXRDY
1901 | ATMCI_ENDRX | ATMCI_ENDTX
1902 | ATMCI_RXBUFF | ATMCI_TXBUFE);
1904 host->data_status = status;
1905 dev_dbg(&host->pdev->dev, "set pending data error\n");
1907 atmci_set_pending(host, EVENT_DATA_ERROR);
1908 tasklet_schedule(&host->tasklet);
1911 if (pending & ATMCI_TXBUFE) {
1912 dev_dbg(&host->pdev->dev, "IRQ: tx buffer empty\n");
1913 atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE);
1914 atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
1916 * We can receive this interruption before having configured
1917 * the second pdc buffer, so we need to reconfigure first and
1918 * second buffers again
1920 if (host->data_size) {
1921 atmci_pdc_set_both_buf(host, XFER_TRANSMIT);
1922 atmci_writel(host, ATMCI_IER, ATMCI_ENDTX);
1923 atmci_writel(host, ATMCI_IER, ATMCI_TXBUFE);
1925 atmci_pdc_complete(host);
1927 } else if (pending & ATMCI_ENDTX) {
1928 dev_dbg(&host->pdev->dev, "IRQ: end of tx buffer\n");
1929 atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
1931 if (host->data_size) {
1932 atmci_pdc_set_single_buf(host,
1933 XFER_TRANSMIT, PDC_SECOND_BUF);
1934 atmci_writel(host, ATMCI_IER, ATMCI_ENDTX);
1938 if (pending & ATMCI_RXBUFF) {
1939 dev_dbg(&host->pdev->dev, "IRQ: rx buffer full\n");
1940 atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF);
1941 atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
1943 * We can receive this interruption before having configured
1944 * the second pdc buffer, so we need to reconfigure first and
1945 * second buffers again
1947 if (host->data_size) {
1948 atmci_pdc_set_both_buf(host, XFER_RECEIVE);
1949 atmci_writel(host, ATMCI_IER, ATMCI_ENDRX);
1950 atmci_writel(host, ATMCI_IER, ATMCI_RXBUFF);
1952 atmci_pdc_complete(host);
1954 } else if (pending & ATMCI_ENDRX) {
1955 dev_dbg(&host->pdev->dev, "IRQ: end of rx buffer\n");
1956 atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
1958 if (host->data_size) {
1959 atmci_pdc_set_single_buf(host,
1960 XFER_RECEIVE, PDC_SECOND_BUF);
1961 atmci_writel(host, ATMCI_IER, ATMCI_ENDRX);
1966 * First mci IPs, so mainly the ones having pdc, have some
1967 * issues with the notbusy signal. You can't get it after
1968 * data transmission if you have not sent a stop command.
1969 * The appropriate workaround is to use the BLKE signal.
1971 if (pending & ATMCI_BLKE) {
1972 dev_dbg(&host->pdev->dev, "IRQ: blke\n");
1973 atmci_writel(host, ATMCI_IDR, ATMCI_BLKE);
1975 dev_dbg(&host->pdev->dev, "set pending notbusy\n");
1976 atmci_set_pending(host, EVENT_NOTBUSY);
1977 tasklet_schedule(&host->tasklet);
1980 if (pending & ATMCI_NOTBUSY) {
1981 dev_dbg(&host->pdev->dev, "IRQ: not_busy\n");
1982 atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY);
1984 dev_dbg(&host->pdev->dev, "set pending notbusy\n");
1985 atmci_set_pending(host, EVENT_NOTBUSY);
1986 tasklet_schedule(&host->tasklet);
1989 if (pending & ATMCI_RXRDY)
1990 atmci_read_data_pio(host);
1991 if (pending & ATMCI_TXRDY)
1992 atmci_write_data_pio(host);
1994 if (pending & ATMCI_CMDRDY) {
1995 dev_dbg(&host->pdev->dev, "IRQ: cmd ready\n");
1996 atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY);
1997 host->cmd_status = status;
1999 dev_dbg(&host->pdev->dev, "set pending cmd rdy\n");
2000 atmci_set_pending(host, EVENT_CMD_RDY);
2001 tasklet_schedule(&host->tasklet);
2004 if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
2005 atmci_sdio_interrupt(host, status);
2007 } while (pass_count++ < 5);
2009 return pass_count ? IRQ_HANDLED : IRQ_NONE;
2012 static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
2014 struct atmel_mci_slot *slot = dev_id;
2017 * Disable interrupts until the pin has stabilized and check
2018 * the state then. Use mod_timer() since we may be in the
2019 * middle of the timer routine when this interrupt triggers.
2021 disable_irq_nosync(irq);
2022 mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20));
2027 static int __init atmci_init_slot(struct atmel_mci *host,
2028 struct mci_slot_pdata *slot_data, unsigned int id,
2029 u32 sdc_reg, u32 sdio_irq)
2031 struct mmc_host *mmc;
2032 struct atmel_mci_slot *slot;
2034 mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev);
2038 slot = mmc_priv(mmc);
2041 slot->detect_pin = slot_data->detect_pin;
2042 slot->wp_pin = slot_data->wp_pin;
2043 slot->detect_is_active_high = slot_data->detect_is_active_high;
2044 slot->sdc_reg = sdc_reg;
2045 slot->sdio_irq = sdio_irq;
2047 mmc->ops = &atmci_ops;
2048 mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
2049 mmc->f_max = host->bus_hz / 2;
2050 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
2052 mmc->caps |= MMC_CAP_SDIO_IRQ;
2053 if (host->caps.has_highspeed)
2054 mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2056 * Without the read/write proof capability, it is strongly suggested to
2057 * use only one bit for data to prevent fifo underruns and overruns
2058 * which will corrupt data.
2060 if ((slot_data->bus_width >= 4) && host->caps.has_rwproof)
2061 mmc->caps |= MMC_CAP_4_BIT_DATA;
2063 if (atmci_get_version(host) < 0x200) {
2064 mmc->max_segs = 256;
2065 mmc->max_blk_size = 4095;
2066 mmc->max_blk_count = 256;
2067 mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
2068 mmc->max_seg_size = mmc->max_blk_size * mmc->max_segs;
2071 mmc->max_req_size = 32768 * 512;
2072 mmc->max_blk_size = 32768;
2073 mmc->max_blk_count = 512;
2076 /* Assume card is present initially */
2077 set_bit(ATMCI_CARD_PRESENT, &slot->flags);
2078 if (gpio_is_valid(slot->detect_pin)) {
2079 if (gpio_request(slot->detect_pin, "mmc_detect")) {
2080 dev_dbg(&mmc->class_dev, "no detect pin available\n");
2081 slot->detect_pin = -EBUSY;
2082 } else if (gpio_get_value(slot->detect_pin) ^
2083 slot->detect_is_active_high) {
2084 clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
2088 if (!gpio_is_valid(slot->detect_pin))
2089 mmc->caps |= MMC_CAP_NEEDS_POLL;
2091 if (gpio_is_valid(slot->wp_pin)) {
2092 if (gpio_request(slot->wp_pin, "mmc_wp")) {
2093 dev_dbg(&mmc->class_dev, "no WP pin available\n");
2094 slot->wp_pin = -EBUSY;
2098 host->slot[id] = slot;
2101 if (gpio_is_valid(slot->detect_pin)) {
2104 setup_timer(&slot->detect_timer, atmci_detect_change,
2105 (unsigned long)slot);
2107 ret = request_irq(gpio_to_irq(slot->detect_pin),
2108 atmci_detect_interrupt,
2109 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
2110 "mmc-detect", slot);
2112 dev_dbg(&mmc->class_dev,
2113 "could not request IRQ %d for detect pin\n",
2114 gpio_to_irq(slot->detect_pin));
2115 gpio_free(slot->detect_pin);
2116 slot->detect_pin = -EBUSY;
2120 atmci_init_debugfs(slot);
2125 static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
2128 /* Debugfs stuff is cleaned up by mmc core */
2130 set_bit(ATMCI_SHUTDOWN, &slot->flags);
2133 mmc_remove_host(slot->mmc);
2135 if (gpio_is_valid(slot->detect_pin)) {
2136 int pin = slot->detect_pin;
2138 free_irq(gpio_to_irq(pin), slot);
2139 del_timer_sync(&slot->detect_timer);
2142 if (gpio_is_valid(slot->wp_pin))
2143 gpio_free(slot->wp_pin);
2145 slot->host->slot[id] = NULL;
2146 mmc_free_host(slot->mmc);
2149 static bool atmci_filter(struct dma_chan *chan, void *slave)
2151 struct mci_dma_data *sl = slave;
2153 if (sl && find_slave_dev(sl) == chan->device->dev) {
2154 chan->private = slave_data_ptr(sl);
2161 static bool atmci_configure_dma(struct atmel_mci *host)
2163 struct mci_platform_data *pdata;
2168 pdata = host->pdev->dev.platform_data;
2170 if (pdata && find_slave_dev(pdata->dma_slave)) {
2171 dma_cap_mask_t mask;
2173 /* Try to grab a DMA channel */
2175 dma_cap_set(DMA_SLAVE, mask);
2177 dma_request_channel(mask, atmci_filter, pdata->dma_slave);
2179 if (!host->dma.chan) {
2180 dev_warn(&host->pdev->dev, "no DMA channel available\n");
2183 dev_info(&host->pdev->dev,
2184 "using %s for DMA transfers\n",
2185 dma_chan_name(host->dma.chan));
2187 host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
2188 host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
2189 host->dma_conf.src_maxburst = 1;
2190 host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
2191 host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
2192 host->dma_conf.dst_maxburst = 1;
2193 host->dma_conf.device_fc = false;
2199 * HSMCI (High Speed MCI) module is not fully compatible with MCI module.
2200 * HSMCI provides DMA support and a new config register but no more supports
2203 static void __init atmci_get_cap(struct atmel_mci *host)
2205 unsigned int version;
2207 version = atmci_get_version(host);
2208 dev_info(&host->pdev->dev,
2209 "version: 0x%x\n", version);
2211 host->caps.has_dma = 0;
2212 host->caps.has_pdc = 1;
2213 host->caps.has_cfg_reg = 0;
2214 host->caps.has_cstor_reg = 0;
2215 host->caps.has_highspeed = 0;
2216 host->caps.has_rwproof = 0;
2217 host->caps.has_odd_clk_div = 0;
2218 host->caps.has_bad_data_ordering = 1;
2219 host->caps.need_reset_after_xfer = 1;
2220 host->caps.need_blksz_mul_4 = 1;
2222 /* keep only major version number */
2223 switch (version & 0xf00) {
2225 host->caps.has_odd_clk_div = 1;
2228 #ifdef CONFIG_AT_HDMAC
2229 host->caps.has_dma = 1;
2231 dev_info(&host->pdev->dev,
2232 "has dma capability but dma engine is not selected, then use pio\n");
2234 host->caps.has_pdc = 0;
2235 host->caps.has_cfg_reg = 1;
2236 host->caps.has_cstor_reg = 1;
2237 host->caps.has_highspeed = 1;
2239 host->caps.has_rwproof = 1;
2240 host->caps.need_blksz_mul_4 = 0;
2242 host->caps.has_bad_data_ordering = 0;
2243 host->caps.need_reset_after_xfer = 0;
2247 host->caps.has_pdc = 0;
2248 dev_warn(&host->pdev->dev,
2249 "Unmanaged mci version, set minimum capabilities\n");
2254 static int __init atmci_probe(struct platform_device *pdev)
2256 struct mci_platform_data *pdata;
2257 struct atmel_mci *host;
2258 struct resource *regs;
2259 unsigned int nr_slots;
2263 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2266 pdata = pdev->dev.platform_data;
2269 irq = platform_get_irq(pdev, 0);
2273 host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL);
2278 spin_lock_init(&host->lock);
2279 INIT_LIST_HEAD(&host->queue);
2281 host->mck = clk_get(&pdev->dev, "mci_clk");
2282 if (IS_ERR(host->mck)) {
2283 ret = PTR_ERR(host->mck);
2288 host->regs = ioremap(regs->start, resource_size(regs));
2292 clk_enable(host->mck);
2293 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
2294 host->bus_hz = clk_get_rate(host->mck);
2295 clk_disable(host->mck);
2297 host->mapbase = regs->start;
2299 tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host);
2301 ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
2303 goto err_request_irq;
2305 /* Get MCI capabilities and set operations according to it */
2306 atmci_get_cap(host);
2307 if (host->caps.has_dma && atmci_configure_dma(host)) {
2308 host->prepare_data = &atmci_prepare_data_dma;
2309 host->submit_data = &atmci_submit_data_dma;
2310 host->stop_transfer = &atmci_stop_transfer_dma;
2311 } else if (host->caps.has_pdc) {
2312 dev_info(&pdev->dev, "using PDC\n");
2313 host->prepare_data = &atmci_prepare_data_pdc;
2314 host->submit_data = &atmci_submit_data_pdc;
2315 host->stop_transfer = &atmci_stop_transfer_pdc;
2317 dev_info(&pdev->dev, "using PIO\n");
2318 host->prepare_data = &atmci_prepare_data;
2319 host->submit_data = &atmci_submit_data;
2320 host->stop_transfer = &atmci_stop_transfer;
2323 platform_set_drvdata(pdev, host);
2325 setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
2327 /* We need at least one slot to succeed */
2330 if (pdata->slot[0].bus_width) {
2331 ret = atmci_init_slot(host, &pdata->slot[0],
2332 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA);
2335 host->buf_size = host->slot[0]->mmc->max_req_size;
2338 if (pdata->slot[1].bus_width) {
2339 ret = atmci_init_slot(host, &pdata->slot[1],
2340 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB);
2343 if (host->slot[1]->mmc->max_req_size > host->buf_size)
2345 host->slot[1]->mmc->max_req_size;
2350 dev_err(&pdev->dev, "init failed: no slot defined\n");
2354 if (!host->caps.has_rwproof) {
2355 host->buffer = dma_alloc_coherent(&pdev->dev, host->buf_size,
2356 &host->buf_phys_addr,
2358 if (!host->buffer) {
2360 dev_err(&pdev->dev, "buffer allocation failed\n");
2365 dev_info(&pdev->dev,
2366 "Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
2367 host->mapbase, irq, nr_slots);
2373 dma_release_channel(host->dma.chan);
2374 free_irq(irq, host);
2376 iounmap(host->regs);
2384 static int __exit atmci_remove(struct platform_device *pdev)
2386 struct atmel_mci *host = platform_get_drvdata(pdev);
2389 platform_set_drvdata(pdev, NULL);
2392 dma_free_coherent(&pdev->dev, host->buf_size,
2393 host->buffer, host->buf_phys_addr);
2395 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
2397 atmci_cleanup_slot(host->slot[i], i);
2400 clk_enable(host->mck);
2401 atmci_writel(host, ATMCI_IDR, ~0UL);
2402 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
2403 atmci_readl(host, ATMCI_SR);
2404 clk_disable(host->mck);
2406 #ifdef CONFIG_MMC_ATMELMCI_DMA
2408 dma_release_channel(host->dma.chan);
2411 free_irq(platform_get_irq(pdev, 0), host);
2412 iounmap(host->regs);
2421 static int atmci_suspend(struct device *dev)
2423 struct atmel_mci *host = dev_get_drvdata(dev);
2426 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
2427 struct atmel_mci_slot *slot = host->slot[i];
2432 ret = mmc_suspend_host(slot->mmc);
2435 slot = host->slot[i];
2437 && test_bit(ATMCI_SUSPENDED, &slot->flags)) {
2438 mmc_resume_host(host->slot[i]->mmc);
2439 clear_bit(ATMCI_SUSPENDED, &slot->flags);
2444 set_bit(ATMCI_SUSPENDED, &slot->flags);
2451 static int atmci_resume(struct device *dev)
2453 struct atmel_mci *host = dev_get_drvdata(dev);
2457 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
2458 struct atmel_mci_slot *slot = host->slot[i];
2461 slot = host->slot[i];
2464 if (!test_bit(ATMCI_SUSPENDED, &slot->flags))
2466 err = mmc_resume_host(slot->mmc);
2470 clear_bit(ATMCI_SUSPENDED, &slot->flags);
2475 static SIMPLE_DEV_PM_OPS(atmci_pm, atmci_suspend, atmci_resume);
2476 #define ATMCI_PM_OPS (&atmci_pm)
2478 #define ATMCI_PM_OPS NULL
2481 static struct platform_driver atmci_driver = {
2482 .remove = __exit_p(atmci_remove),
2484 .name = "atmel_mci",
2489 static int __init atmci_init(void)
2491 return platform_driver_probe(&atmci_driver, atmci_probe);
2494 static void __exit atmci_exit(void)
2496 platform_driver_unregister(&atmci_driver);
2499 late_initcall(atmci_init); /* try to load after dma driver when built-in */
2500 module_exit(atmci_exit);
2502 MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
2503 MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
2504 MODULE_LICENSE("GPL v2");