2 * Blackfin On-Chip MAC Driver
4 * Copyright 2004-2010 Analog Devices Inc.
6 * Enter bugs at http://blackfin.uclinux.org/
8 * Licensed under the GPL-2 or later.
11 #include <linux/init.h>
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/sched.h>
15 #include <linux/slab.h>
16 #include <linux/delay.h>
17 #include <linux/timer.h>
18 #include <linux/errno.h>
19 #include <linux/irq.h>
21 #include <linux/ioport.h>
22 #include <linux/crc32.h>
23 #include <linux/device.h>
24 #include <linux/spinlock.h>
25 #include <linux/mii.h>
26 #include <linux/netdevice.h>
27 #include <linux/etherdevice.h>
28 #include <linux/ethtool.h>
29 #include <linux/skbuff.h>
30 #include <linux/platform_device.h>
33 #include <linux/dma-mapping.h>
35 #include <asm/div64.h>
37 #include <asm/blackfin.h>
38 #include <asm/cacheflush.h>
39 #include <asm/portmux.h>
44 #define DRV_NAME "bfin_mac"
45 #define DRV_VERSION "1.1"
46 #define DRV_AUTHOR "Bryan Wu, Luke Yang"
47 #define DRV_DESC "Blackfin on-chip Ethernet MAC driver"
49 MODULE_AUTHOR(DRV_AUTHOR);
50 MODULE_LICENSE("GPL");
51 MODULE_DESCRIPTION(DRV_DESC);
52 MODULE_ALIAS("platform:bfin_mac");
54 #if defined(CONFIG_BFIN_MAC_USE_L1)
55 # define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size)
56 # define bfin_mac_free(dma_handle, ptr) l1_data_sram_free(ptr)
58 # define bfin_mac_alloc(dma_handle, size) \
59 dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL)
60 # define bfin_mac_free(dma_handle, ptr) \
61 dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle)
64 #define PKT_BUF_SZ 1580
66 #define MAX_TIMEOUT_CNT 500
68 /* pointers to maintain transmit list */
69 static struct net_dma_desc_tx *tx_list_head;
70 static struct net_dma_desc_tx *tx_list_tail;
71 static struct net_dma_desc_rx *rx_list_head;
72 static struct net_dma_desc_rx *rx_list_tail;
73 static struct net_dma_desc_rx *current_rx_ptr;
74 static struct net_dma_desc_tx *current_tx_ptr;
75 static struct net_dma_desc_tx *tx_desc;
76 static struct net_dma_desc_rx *rx_desc;
78 static void desc_list_free(void)
80 struct net_dma_desc_rx *r;
81 struct net_dma_desc_tx *t;
83 #if !defined(CONFIG_BFIN_MAC_USE_L1)
84 dma_addr_t dma_handle = 0;
89 for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
92 dev_kfree_skb(t->skb);
98 bfin_mac_free(dma_handle, tx_desc);
103 for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
106 dev_kfree_skb(r->skb);
112 bfin_mac_free(dma_handle, rx_desc);
116 static int desc_list_init(void)
119 struct sk_buff *new_skb;
120 #if !defined(CONFIG_BFIN_MAC_USE_L1)
122 * This dma_handle is useless in Blackfin dma_alloc_coherent().
123 * The real dma handler is the return value of dma_alloc_coherent().
125 dma_addr_t dma_handle;
128 tx_desc = bfin_mac_alloc(&dma_handle,
129 sizeof(struct net_dma_desc_tx) *
130 CONFIG_BFIN_TX_DESC_NUM);
134 rx_desc = bfin_mac_alloc(&dma_handle,
135 sizeof(struct net_dma_desc_rx) *
136 CONFIG_BFIN_RX_DESC_NUM);
141 tx_list_head = tx_list_tail = tx_desc;
143 for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
144 struct net_dma_desc_tx *t = tx_desc + i;
145 struct dma_descriptor *a = &(t->desc_a);
146 struct dma_descriptor *b = &(t->desc_b);
150 * read from memory WNR = 0
151 * wordsize is 32 bits
152 * 6 half words is desc size
155 a->config = WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
156 a->start_addr = (unsigned long)t->packet;
158 a->next_dma_desc = b;
162 * write to memory WNR = 1
163 * wordsize is 32 bits
165 * 6 half words is desc size
168 b->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
169 b->start_addr = (unsigned long)(&(t->status));
173 tx_list_tail->desc_b.next_dma_desc = a;
174 tx_list_tail->next = t;
177 tx_list_tail->next = tx_list_head; /* tx_list is a circle */
178 tx_list_tail->desc_b.next_dma_desc = &(tx_list_head->desc_a);
179 current_tx_ptr = tx_list_head;
182 rx_list_head = rx_list_tail = rx_desc;
184 for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
185 struct net_dma_desc_rx *r = rx_desc + i;
186 struct dma_descriptor *a = &(r->desc_a);
187 struct dma_descriptor *b = &(r->desc_b);
189 /* allocate a new skb for next time receive */
190 new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
192 printk(KERN_NOTICE DRV_NAME
193 ": init: low on mem - packet dropped\n");
196 skb_reserve(new_skb, NET_IP_ALIGN);
197 /* Invidate the data cache of skb->data range when it is write back
198 * cache. It will prevent overwritting the new data from DMA
200 blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
201 (unsigned long)new_skb->end);
206 * write to memory WNR = 1
207 * wordsize is 32 bits
209 * 6 half words is desc size
212 a->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
213 /* since RXDWA is enabled */
214 a->start_addr = (unsigned long)new_skb->data - 2;
216 a->next_dma_desc = b;
220 * write to memory WNR = 1
221 * wordsize is 32 bits
223 * 6 half words is desc size
226 b->config = DMAEN | WNR | WDSIZE_32 | DI_EN |
227 NDSIZE_6 | DMAFLOW_LARGE;
228 b->start_addr = (unsigned long)(&(r->status));
231 rx_list_tail->desc_b.next_dma_desc = a;
232 rx_list_tail->next = r;
235 rx_list_tail->next = rx_list_head; /* rx_list is a circle */
236 rx_list_tail->desc_b.next_dma_desc = &(rx_list_head->desc_a);
237 current_rx_ptr = rx_list_head;
243 printk(KERN_ERR DRV_NAME ": kmalloc failed\n");
248 /*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
253 /* Wait until the previous MDC/MDIO transaction has completed */
254 static int bfin_mdio_poll(void)
256 int timeout_cnt = MAX_TIMEOUT_CNT;
258 /* poll the STABUSY bit */
259 while ((bfin_read_EMAC_STAADD()) & STABUSY) {
261 if (timeout_cnt-- < 0) {
262 printk(KERN_ERR DRV_NAME
263 ": wait MDC/MDIO transaction to complete timeout\n");
271 /* Read an off-chip register in a PHY through the MDC/MDIO port */
272 static int bfin_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
276 ret = bfin_mdio_poll();
281 bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
282 SET_REGAD((u16) regnum) |
285 ret = bfin_mdio_poll();
289 return (int) bfin_read_EMAC_STADAT();
292 /* Write an off-chip register in a PHY through the MDC/MDIO port */
293 static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
298 ret = bfin_mdio_poll();
302 bfin_write_EMAC_STADAT((u32) value);
305 bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
306 SET_REGAD((u16) regnum) |
310 return bfin_mdio_poll();
313 static int bfin_mdiobus_reset(struct mii_bus *bus)
318 static void bfin_mac_adjust_link(struct net_device *dev)
320 struct bfin_mac_local *lp = netdev_priv(dev);
321 struct phy_device *phydev = lp->phydev;
325 spin_lock_irqsave(&lp->lock, flags);
327 /* Now we make sure that we can be in full duplex mode.
328 * If not, we operate in half-duplex mode. */
329 if (phydev->duplex != lp->old_duplex) {
330 u32 opmode = bfin_read_EMAC_OPMODE();
338 bfin_write_EMAC_OPMODE(opmode);
339 lp->old_duplex = phydev->duplex;
342 if (phydev->speed != lp->old_speed) {
343 if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
344 u32 opmode = bfin_read_EMAC_OPMODE();
345 switch (phydev->speed) {
354 "%s: Ack! Speed (%d) is not 10/100!\n",
355 DRV_NAME, phydev->speed);
358 bfin_write_EMAC_OPMODE(opmode);
362 lp->old_speed = phydev->speed;
369 } else if (lp->old_link) {
377 u32 opmode = bfin_read_EMAC_OPMODE();
378 phy_print_status(phydev);
379 pr_debug("EMAC_OPMODE = 0x%08x\n", opmode);
382 spin_unlock_irqrestore(&lp->lock, flags);
386 #define MDC_CLK 2500000
388 static int mii_probe(struct net_device *dev, int phy_mode)
390 struct bfin_mac_local *lp = netdev_priv(dev);
391 struct phy_device *phydev = NULL;
392 unsigned short sysctl;
396 /* Enable PHY output early */
397 if (!(bfin_read_VR_CTL() & CLKBUFOE))
398 bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
401 mdc_div = ((sclk / MDC_CLK) / 2) - 1;
403 sysctl = bfin_read_EMAC_SYSCTL();
404 sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
405 bfin_write_EMAC_SYSCTL(sysctl);
407 /* search for connected PHY device */
408 for (i = 0; i < PHY_MAX_ADDR; ++i) {
409 struct phy_device *const tmp_phydev = lp->mii_bus->phy_map[i];
412 continue; /* no PHY here... */
415 break; /* found it */
418 /* now we are supposed to have a proper phydev, to attach to... */
420 printk(KERN_INFO "%s: Don't found any phy device at all\n",
425 if (phy_mode != PHY_INTERFACE_MODE_RMII &&
426 phy_mode != PHY_INTERFACE_MODE_MII) {
427 printk(KERN_INFO "%s: Invalid phy interface mode\n", dev->name);
431 phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
434 if (IS_ERR(phydev)) {
435 printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
436 return PTR_ERR(phydev);
439 /* mask with MAC supported features */
440 phydev->supported &= (SUPPORTED_10baseT_Half
441 | SUPPORTED_10baseT_Full
442 | SUPPORTED_100baseT_Half
443 | SUPPORTED_100baseT_Full
445 | SUPPORTED_Pause | SUPPORTED_Asym_Pause
449 phydev->advertising = phydev->supported;
456 printk(KERN_INFO "%s: attached PHY driver [%s] "
457 "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
459 DRV_NAME, phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
460 MDC_CLK, mdc_div, sclk/1000000);
470 * interrupt routine for magic packet wakeup
472 static irqreturn_t bfin_mac_wake_interrupt(int irq, void *dev_id)
478 bfin_mac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
480 struct bfin_mac_local *lp = netdev_priv(dev);
483 return phy_ethtool_gset(lp->phydev, cmd);
489 bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
491 struct bfin_mac_local *lp = netdev_priv(dev);
493 if (!capable(CAP_NET_ADMIN))
497 return phy_ethtool_sset(lp->phydev, cmd);
502 static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
503 struct ethtool_drvinfo *info)
505 strcpy(info->driver, DRV_NAME);
506 strcpy(info->version, DRV_VERSION);
507 strcpy(info->fw_version, "N/A");
508 strcpy(info->bus_info, dev_name(&dev->dev));
511 static void bfin_mac_ethtool_getwol(struct net_device *dev,
512 struct ethtool_wolinfo *wolinfo)
514 struct bfin_mac_local *lp = netdev_priv(dev);
516 wolinfo->supported = WAKE_MAGIC;
517 wolinfo->wolopts = lp->wol;
520 static int bfin_mac_ethtool_setwol(struct net_device *dev,
521 struct ethtool_wolinfo *wolinfo)
523 struct bfin_mac_local *lp = netdev_priv(dev);
526 if (wolinfo->wolopts & (WAKE_MAGICSECURE |
533 lp->wol = wolinfo->wolopts;
535 if (lp->wol && !lp->irq_wake_requested) {
536 /* register wake irq handler */
537 rc = request_irq(IRQ_MAC_WAKEDET, bfin_mac_wake_interrupt,
538 IRQF_DISABLED, "EMAC_WAKE", dev);
541 lp->irq_wake_requested = true;
544 if (!lp->wol && lp->irq_wake_requested) {
545 free_irq(IRQ_MAC_WAKEDET, dev);
546 lp->irq_wake_requested = false;
549 /* Make sure the PHY driver doesn't suspend */
550 device_init_wakeup(&dev->dev, lp->wol);
555 static const struct ethtool_ops bfin_mac_ethtool_ops = {
556 .get_settings = bfin_mac_ethtool_getsettings,
557 .set_settings = bfin_mac_ethtool_setsettings,
558 .get_link = ethtool_op_get_link,
559 .get_drvinfo = bfin_mac_ethtool_getdrvinfo,
560 .get_wol = bfin_mac_ethtool_getwol,
561 .set_wol = bfin_mac_ethtool_setwol,
564 /**************************************************************************/
565 void setup_system_regs(struct net_device *dev)
567 struct bfin_mac_local *lp = netdev_priv(dev);
569 unsigned short sysctl;
572 * Odd word alignment for Receive Frame DMA word
573 * Configure checksum support and rcve frame word alignment
575 sysctl = bfin_read_EMAC_SYSCTL();
577 * check if interrupt is requested for any PHY,
578 * enable PHY interrupt only if needed
580 for (i = 0; i < PHY_MAX_ADDR; ++i)
581 if (lp->mii_bus->irq[i] != PHY_POLL)
583 if (i < PHY_MAX_ADDR)
586 #if defined(BFIN_MAC_CSUM_OFFLOAD)
591 bfin_write_EMAC_SYSCTL(sysctl);
593 bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
595 /* Initialize the TX DMA channel registers */
596 bfin_write_DMA2_X_COUNT(0);
597 bfin_write_DMA2_X_MODIFY(4);
598 bfin_write_DMA2_Y_COUNT(0);
599 bfin_write_DMA2_Y_MODIFY(0);
601 /* Initialize the RX DMA channel registers */
602 bfin_write_DMA1_X_COUNT(0);
603 bfin_write_DMA1_X_MODIFY(4);
604 bfin_write_DMA1_Y_COUNT(0);
605 bfin_write_DMA1_Y_MODIFY(0);
608 static void setup_mac_addr(u8 *mac_addr)
610 u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]);
611 u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]);
613 /* this depends on a little-endian machine */
614 bfin_write_EMAC_ADDRLO(addr_low);
615 bfin_write_EMAC_ADDRHI(addr_hi);
618 static int bfin_mac_set_mac_address(struct net_device *dev, void *p)
620 struct sockaddr *addr = p;
621 if (netif_running(dev))
623 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
624 setup_mac_addr(dev->dev_addr);
628 #ifdef CONFIG_BFIN_MAC_USE_HWSTAMP
629 #define bfin_mac_hwtstamp_is_none(cfg) ((cfg) == HWTSTAMP_FILTER_NONE)
631 static int bfin_mac_hwtstamp_ioctl(struct net_device *netdev,
632 struct ifreq *ifr, int cmd)
634 struct hwtstamp_config config;
635 struct bfin_mac_local *lp = netdev_priv(netdev);
637 u32 ptpfv1, ptpfv2, ptpfv3, ptpfoff;
639 if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
642 pr_debug("%s config flag:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
643 __func__, config.flags, config.tx_type, config.rx_filter);
645 /* reserved for future extensions */
649 if ((config.tx_type != HWTSTAMP_TX_OFF) &&
650 (config.tx_type != HWTSTAMP_TX_ON))
653 ptpctl = bfin_read_EMAC_PTP_CTL();
655 switch (config.rx_filter) {
656 case HWTSTAMP_FILTER_NONE:
658 * Dont allow any timestamping
661 bfin_write_EMAC_PTP_FV3(ptpfv3);
663 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
664 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
665 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
667 * Clear the five comparison mask bits (bits[12:8]) in EMAC_PTP_CTL)
668 * to enable all the field matches.
671 bfin_write_EMAC_PTP_CTL(ptpctl);
673 * Keep the default values of the EMAC_PTP_FOFF register.
675 ptpfoff = 0x4A24170C;
676 bfin_write_EMAC_PTP_FOFF(ptpfoff);
678 * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
682 bfin_write_EMAC_PTP_FV1(ptpfv1);
684 bfin_write_EMAC_PTP_FV2(ptpfv2);
686 * The default value (0xFFFC) allows the timestamping of both
687 * received Sync messages and Delay_Req messages.
690 bfin_write_EMAC_PTP_FV3(ptpfv3);
692 config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
694 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
695 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
696 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
697 /* Clear all five comparison mask bits (bits[12:8]) in the
698 * EMAC_PTP_CTL register to enable all the field matches.
701 bfin_write_EMAC_PTP_CTL(ptpctl);
703 * Keep the default values of the EMAC_PTP_FOFF register, except set
704 * the PTPCOF field to 0x2A.
706 ptpfoff = 0x2A24170C;
707 bfin_write_EMAC_PTP_FOFF(ptpfoff);
709 * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
713 bfin_write_EMAC_PTP_FV1(ptpfv1);
715 bfin_write_EMAC_PTP_FV2(ptpfv2);
717 * To allow the timestamping of Pdelay_Req and Pdelay_Resp, set
718 * the value to 0xFFF0.
721 bfin_write_EMAC_PTP_FV3(ptpfv3);
723 config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
725 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
726 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
727 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
729 * Clear bits 8 and 12 of the EMAC_PTP_CTL register to enable only the
730 * EFTM and PTPCM field comparison.
733 bfin_write_EMAC_PTP_CTL(ptpctl);
735 * Keep the default values of all the fields of the EMAC_PTP_FOFF
736 * register, except set the PTPCOF field to 0x0E.
738 ptpfoff = 0x0E24170C;
739 bfin_write_EMAC_PTP_FOFF(ptpfoff);
741 * Program bits [15:0] of the EMAC_PTP_FV1 register to 0x88F7, which
742 * corresponds to PTP messages on the MAC layer.
745 bfin_write_EMAC_PTP_FV1(ptpfv1);
747 bfin_write_EMAC_PTP_FV2(ptpfv2);
749 * To allow the timestamping of Pdelay_Req and Pdelay_Resp
750 * messages, set the value to 0xFFF0.
753 bfin_write_EMAC_PTP_FV3(ptpfv3);
755 config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
761 if (config.tx_type == HWTSTAMP_TX_OFF &&
762 bfin_mac_hwtstamp_is_none(config.rx_filter)) {
764 bfin_write_EMAC_PTP_CTL(ptpctl);
769 bfin_write_EMAC_PTP_CTL(ptpctl);
772 * clear any existing timestamp
774 bfin_read_EMAC_PTP_RXSNAPLO();
775 bfin_read_EMAC_PTP_RXSNAPHI();
777 bfin_read_EMAC_PTP_TXSNAPLO();
778 bfin_read_EMAC_PTP_TXSNAPHI();
781 * Set registers so that rollover occurs soon to test this.
783 bfin_write_EMAC_PTP_TIMELO(0x00000000);
784 bfin_write_EMAC_PTP_TIMEHI(0xFF800000);
788 lp->compare.last_update = 0;
789 timecounter_init(&lp->clock,
791 ktime_to_ns(ktime_get_real()));
792 timecompare_update(&lp->compare, 0);
795 lp->stamp_cfg = config;
796 return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
800 static void bfin_dump_hwtamp(char *s, ktime_t *hw, ktime_t *ts, struct timecompare *cmp)
802 ktime_t sys = ktime_get_real();
804 pr_debug("%s %s hardware:%d,%d transform system:%d,%d system:%d,%d, cmp:%lld, %lld\n",
805 __func__, s, hw->tv.sec, hw->tv.nsec, ts->tv.sec, ts->tv.nsec, sys.tv.sec,
806 sys.tv.nsec, cmp->offset, cmp->skew);
809 static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
811 struct bfin_mac_local *lp = netdev_priv(netdev);
813 if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
814 int timeout_cnt = MAX_TIMEOUT_CNT;
816 /* When doing time stamping, keep the connection to the socket
819 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
822 * The timestamping is done at the EMAC module's MII/RMII interface
823 * when the module sees the Start of Frame of an event message packet. This
824 * interface is the closest possible place to the physical Ethernet transmission
825 * medium, providing the best timing accuracy.
827 while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt))
829 if (timeout_cnt == 0)
830 printk(KERN_ERR DRV_NAME
831 ": fails to timestamp the TX packet\n");
833 struct skb_shared_hwtstamps shhwtstamps;
837 regval = bfin_read_EMAC_PTP_TXSNAPLO();
838 regval |= (u64)bfin_read_EMAC_PTP_TXSNAPHI() << 32;
839 memset(&shhwtstamps, 0, sizeof(shhwtstamps));
840 ns = timecounter_cyc2time(&lp->clock,
842 timecompare_update(&lp->compare, ns);
843 shhwtstamps.hwtstamp = ns_to_ktime(ns);
844 shhwtstamps.syststamp =
845 timecompare_transform(&lp->compare, ns);
846 skb_tstamp_tx(skb, &shhwtstamps);
848 bfin_dump_hwtamp("TX", &shhwtstamps.hwtstamp, &shhwtstamps.syststamp, &lp->compare);
853 static void bfin_rx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
855 struct bfin_mac_local *lp = netdev_priv(netdev);
858 struct skb_shared_hwtstamps *shhwtstamps;
860 if (bfin_mac_hwtstamp_is_none(lp->stamp_cfg.rx_filter))
863 valid = bfin_read_EMAC_PTP_ISTAT() & RXEL;
867 shhwtstamps = skb_hwtstamps(skb);
869 regval = bfin_read_EMAC_PTP_RXSNAPLO();
870 regval |= (u64)bfin_read_EMAC_PTP_RXSNAPHI() << 32;
871 ns = timecounter_cyc2time(&lp->clock, regval);
872 timecompare_update(&lp->compare, ns);
873 memset(shhwtstamps, 0, sizeof(*shhwtstamps));
874 shhwtstamps->hwtstamp = ns_to_ktime(ns);
875 shhwtstamps->syststamp = timecompare_transform(&lp->compare, ns);
877 bfin_dump_hwtamp("RX", &shhwtstamps->hwtstamp, &shhwtstamps->syststamp, &lp->compare);
881 * bfin_read_clock - read raw cycle counter (to be used by time counter)
883 static cycle_t bfin_read_clock(const struct cyclecounter *tc)
887 stamp = bfin_read_EMAC_PTP_TIMELO();
888 stamp |= (u64)bfin_read_EMAC_PTP_TIMEHI() << 32ULL;
893 #define PTP_CLK 25000000
895 static void bfin_mac_hwtstamp_init(struct net_device *netdev)
897 struct bfin_mac_local *lp = netdev_priv(netdev);
900 /* Initialize hardware timer */
901 append = PTP_CLK * (1ULL << 32);
902 do_div(append, get_sclk());
903 bfin_write_EMAC_PTP_ADDEND((u32)append);
905 memset(&lp->cycles, 0, sizeof(lp->cycles));
906 lp->cycles.read = bfin_read_clock;
907 lp->cycles.mask = CLOCKSOURCE_MASK(64);
908 lp->cycles.mult = 1000000000 / PTP_CLK;
909 lp->cycles.shift = 0;
911 /* Synchronize our NIC clock against system wall clock */
912 memset(&lp->compare, 0, sizeof(lp->compare));
913 lp->compare.source = &lp->clock;
914 lp->compare.target = ktime_get_real;
915 lp->compare.num_samples = 10;
917 /* Initialize hwstamp config */
918 lp->stamp_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
919 lp->stamp_cfg.tx_type = HWTSTAMP_TX_OFF;
923 # define bfin_mac_hwtstamp_is_none(cfg) 0
924 # define bfin_mac_hwtstamp_init(dev)
925 # define bfin_mac_hwtstamp_ioctl(dev, ifr, cmd) (-EOPNOTSUPP)
926 # define bfin_rx_hwtstamp(dev, skb)
927 # define bfin_tx_hwtstamp(dev, skb)
930 static inline void _tx_reclaim_skb(void)
933 tx_list_head->desc_a.config &= ~DMAEN;
934 tx_list_head->status.status_word = 0;
935 if (tx_list_head->skb) {
936 dev_kfree_skb(tx_list_head->skb);
937 tx_list_head->skb = NULL;
939 tx_list_head = tx_list_head->next;
941 } while (tx_list_head->status.status_word != 0);
944 static void tx_reclaim_skb(struct bfin_mac_local *lp)
946 int timeout_cnt = MAX_TIMEOUT_CNT;
948 if (tx_list_head->status.status_word != 0)
951 if (current_tx_ptr->next == tx_list_head) {
952 while (tx_list_head->status.status_word == 0) {
953 /* slow down polling to avoid too many queue stop. */
955 /* reclaim skb if DMA is not running. */
956 if (!(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN))
958 if (timeout_cnt-- < 0)
962 if (timeout_cnt >= 0)
965 netif_stop_queue(lp->ndev);
968 if (current_tx_ptr->next != tx_list_head &&
969 netif_queue_stopped(lp->ndev))
970 netif_wake_queue(lp->ndev);
972 if (tx_list_head != current_tx_ptr) {
973 /* shorten the timer interval if tx queue is stopped */
974 if (netif_queue_stopped(lp->ndev))
975 lp->tx_reclaim_timer.expires =
976 jiffies + (TX_RECLAIM_JIFFIES >> 4);
978 lp->tx_reclaim_timer.expires =
979 jiffies + TX_RECLAIM_JIFFIES;
981 mod_timer(&lp->tx_reclaim_timer,
982 lp->tx_reclaim_timer.expires);
988 static void tx_reclaim_skb_timeout(unsigned long lp)
990 tx_reclaim_skb((struct bfin_mac_local *)lp);
993 static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
994 struct net_device *dev)
996 struct bfin_mac_local *lp = netdev_priv(dev);
998 u32 data_align = (unsigned long)(skb->data) & 0x3;
1000 current_tx_ptr->skb = skb;
1002 if (data_align == 0x2) {
1003 /* move skb->data to current_tx_ptr payload */
1004 data = (u16 *)(skb->data) - 1;
1005 *data = (u16)(skb->len);
1007 * When transmitting an Ethernet packet, the PTP_TSYNC module requires
1008 * a DMA_Length_Word field associated with the packet. The lower 12 bits
1009 * of this field are the length of the packet payload in bytes and the higher
1010 * 4 bits are the timestamping enable field.
1012 if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
1015 current_tx_ptr->desc_a.start_addr = (u32)data;
1016 /* this is important! */
1017 blackfin_dcache_flush_range((u32)data,
1018 (u32)((u8 *)data + skb->len + 4));
1020 *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
1021 /* enable timestamping for the sent packet */
1022 if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
1023 *((u16 *)(current_tx_ptr->packet)) |= 0x1000;
1024 memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
1026 current_tx_ptr->desc_a.start_addr =
1027 (u32)current_tx_ptr->packet;
1028 blackfin_dcache_flush_range(
1029 (u32)current_tx_ptr->packet,
1030 (u32)(current_tx_ptr->packet + skb->len + 2));
1033 /* make sure the internal data buffers in the core are drained
1034 * so that the DMA descriptors are completely written when the
1035 * DMA engine goes to fetch them below
1039 /* always clear status buffer before start tx dma */
1040 current_tx_ptr->status.status_word = 0;
1042 /* enable this packet's dma */
1043 current_tx_ptr->desc_a.config |= DMAEN;
1045 /* tx dma is running, just return */
1046 if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)
1049 /* tx dma is not running */
1050 bfin_write_DMA2_NEXT_DESC_PTR(&(current_tx_ptr->desc_a));
1051 /* dma enabled, read from memory, size is 6 */
1052 bfin_write_DMA2_CONFIG(current_tx_ptr->desc_a.config);
1053 /* Turn on the EMAC tx */
1054 bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
1057 bfin_tx_hwtstamp(dev, skb);
1059 current_tx_ptr = current_tx_ptr->next;
1060 dev->stats.tx_packets++;
1061 dev->stats.tx_bytes += (skb->len);
1065 return NETDEV_TX_OK;
1068 #define IP_HEADER_OFF 0
1069 #define RX_ERROR_MASK (RX_LONG | RX_ALIGN | RX_CRC | RX_LEN | \
1070 RX_FRAG | RX_ADDR | RX_DMAO | RX_PHY | RX_LATE | RX_RANGE)
1072 static void bfin_mac_rx(struct net_device *dev)
1074 struct sk_buff *skb, *new_skb;
1076 struct bfin_mac_local *lp __maybe_unused = netdev_priv(dev);
1077 #if defined(BFIN_MAC_CSUM_OFFLOAD)
1079 unsigned char fcs[ETH_FCS_LEN + 1];
1082 /* check if frame status word reports an error condition
1083 * we which case we simply drop the packet
1085 if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
1086 printk(KERN_NOTICE DRV_NAME
1087 ": rx: receive error - packet dropped\n");
1088 dev->stats.rx_dropped++;
1092 /* allocate a new skb for next time receive */
1093 skb = current_rx_ptr->skb;
1095 new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
1097 printk(KERN_NOTICE DRV_NAME
1098 ": rx: low on mem - packet dropped\n");
1099 dev->stats.rx_dropped++;
1102 /* reserve 2 bytes for RXDWA padding */
1103 skb_reserve(new_skb, NET_IP_ALIGN);
1104 /* Invidate the data cache of skb->data range when it is write back
1105 * cache. It will prevent overwritting the new data from DMA
1107 blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
1108 (unsigned long)new_skb->end);
1110 current_rx_ptr->skb = new_skb;
1111 current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
1113 len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
1114 /* Deduce Ethernet FCS length from Ethernet payload length */
1118 skb->protocol = eth_type_trans(skb, dev);
1120 bfin_rx_hwtstamp(dev, skb);
1122 #if defined(BFIN_MAC_CSUM_OFFLOAD)
1123 /* Checksum offloading only works for IPv4 packets with the standard IP header
1124 * length of 20 bytes, because the blackfin MAC checksum calculation is
1125 * based on that assumption. We must NOT use the calculated checksum if our
1126 * IP version or header break that assumption.
1128 if (skb->data[IP_HEADER_OFF] == 0x45) {
1129 skb->csum = current_rx_ptr->status.ip_payload_csum;
1131 * Deduce Ethernet FCS from hardware generated IP payload checksum.
1132 * IP checksum is based on 16-bit one's complement algorithm.
1133 * To deduce a value from checksum is equal to add its inversion.
1134 * If the IP payload len is odd, the inversed FCS should also
1135 * begin from odd address and leave first byte zero.
1139 for (i = 0; i < ETH_FCS_LEN; i++)
1140 fcs[i + 1] = ~skb->data[skb->len + i];
1141 skb->csum = csum_partial(fcs, ETH_FCS_LEN + 1, skb->csum);
1143 for (i = 0; i < ETH_FCS_LEN; i++)
1144 fcs[i] = ~skb->data[skb->len + i];
1145 skb->csum = csum_partial(fcs, ETH_FCS_LEN, skb->csum);
1147 skb->ip_summed = CHECKSUM_COMPLETE;
1152 dev->stats.rx_packets++;
1153 dev->stats.rx_bytes += len;
1155 current_rx_ptr->status.status_word = 0x00000000;
1156 current_rx_ptr = current_rx_ptr->next;
1159 /* interrupt routine to handle rx and error signal */
1160 static irqreturn_t bfin_mac_interrupt(int irq, void *dev_id)
1162 struct net_device *dev = dev_id;
1166 if (current_rx_ptr->status.status_word == 0) {
1167 /* no more new packet received */
1169 if (current_rx_ptr->next->status.status_word != 0) {
1170 current_rx_ptr = current_rx_ptr->next;
1174 bfin_write_DMA1_IRQ_STATUS(bfin_read_DMA1_IRQ_STATUS() |
1175 DMA_DONE | DMA_ERR);
1182 goto get_one_packet;
1185 #ifdef CONFIG_NET_POLL_CONTROLLER
1186 static void bfin_mac_poll(struct net_device *dev)
1188 struct bfin_mac_local *lp = netdev_priv(dev);
1190 disable_irq(IRQ_MAC_RX);
1191 bfin_mac_interrupt(IRQ_MAC_RX, dev);
1193 enable_irq(IRQ_MAC_RX);
1195 #endif /* CONFIG_NET_POLL_CONTROLLER */
1197 static void bfin_mac_disable(void)
1199 unsigned int opmode;
1201 opmode = bfin_read_EMAC_OPMODE();
1204 /* Turn off the EMAC */
1205 bfin_write_EMAC_OPMODE(opmode);
1209 * Enable Interrupts, Receive, and Transmit
1211 static int bfin_mac_enable(struct phy_device *phydev)
1216 pr_debug("%s: %s\n", DRV_NAME, __func__);
1219 bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
1220 bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config);
1223 ret = bfin_mdio_poll();
1227 /* We enable only RX here */
1228 /* ASTP : Enable Automatic Pad Stripping
1229 PR : Promiscuous Mode for test
1230 PSF : Receive frames with total length less than 64 bytes.
1231 FDMODE : Full Duplex Mode
1232 LB : Internal Loopback for test
1233 RE : Receiver Enable */
1234 opmode = bfin_read_EMAC_OPMODE();
1235 if (opmode & FDMODE)
1238 opmode |= DRO | DC | PSF;
1241 if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
1242 opmode |= RMII; /* For Now only 100MBit are supported */
1243 #if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) && CONFIG_BF_REV_0_2
1248 /* Turn on the EMAC rx */
1249 bfin_write_EMAC_OPMODE(opmode);
1254 /* Our watchdog timed out. Called by the networking layer */
1255 static void bfin_mac_timeout(struct net_device *dev)
1257 struct bfin_mac_local *lp = netdev_priv(dev);
1259 pr_debug("%s: %s\n", dev->name, __func__);
1263 del_timer(&lp->tx_reclaim_timer);
1265 /* reset tx queue and free skb */
1266 while (tx_list_head != current_tx_ptr) {
1267 tx_list_head->desc_a.config &= ~DMAEN;
1268 tx_list_head->status.status_word = 0;
1269 if (tx_list_head->skb) {
1270 dev_kfree_skb(tx_list_head->skb);
1271 tx_list_head->skb = NULL;
1273 tx_list_head = tx_list_head->next;
1276 if (netif_queue_stopped(lp->ndev))
1277 netif_wake_queue(lp->ndev);
1279 bfin_mac_enable(lp->phydev);
1281 /* We can accept TX packets again */
1282 dev->trans_start = jiffies; /* prevent tx timeout */
1283 netif_wake_queue(dev);
1286 static void bfin_mac_multicast_hash(struct net_device *dev)
1288 u32 emac_hashhi, emac_hashlo;
1289 struct netdev_hw_addr *ha;
1293 emac_hashhi = emac_hashlo = 0;
1295 netdev_for_each_mc_addr(ha, dev) {
1298 /* skip non-multicast addresses */
1302 crc = ether_crc(ETH_ALEN, addrs);
1306 emac_hashhi |= 1 << (crc & 0x1f);
1308 emac_hashlo |= 1 << (crc & 0x1f);
1311 bfin_write_EMAC_HASHHI(emac_hashhi);
1312 bfin_write_EMAC_HASHLO(emac_hashlo);
1316 * This routine will, depending on the values passed to it,
1317 * either make it accept multicast packets, go into
1318 * promiscuous mode (for TCPDUMP and cousins) or accept
1319 * a select set of multicast packets
1321 static void bfin_mac_set_multicast_list(struct net_device *dev)
1325 if (dev->flags & IFF_PROMISC) {
1326 printk(KERN_INFO "%s: set to promisc mode\n", dev->name);
1327 sysctl = bfin_read_EMAC_OPMODE();
1329 bfin_write_EMAC_OPMODE(sysctl);
1330 } else if (dev->flags & IFF_ALLMULTI) {
1331 /* accept all multicast */
1332 sysctl = bfin_read_EMAC_OPMODE();
1334 bfin_write_EMAC_OPMODE(sysctl);
1335 } else if (!netdev_mc_empty(dev)) {
1336 /* set up multicast hash table */
1337 sysctl = bfin_read_EMAC_OPMODE();
1339 bfin_write_EMAC_OPMODE(sysctl);
1340 bfin_mac_multicast_hash(dev);
1342 /* clear promisc or multicast mode */
1343 sysctl = bfin_read_EMAC_OPMODE();
1344 sysctl &= ~(RAF | PAM);
1345 bfin_write_EMAC_OPMODE(sysctl);
1349 static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
1351 struct bfin_mac_local *lp = netdev_priv(netdev);
1353 if (!netif_running(netdev))
1358 return bfin_mac_hwtstamp_ioctl(netdev, ifr, cmd);
1361 return phy_mii_ioctl(lp->phydev, ifr, cmd);
1368 * this puts the device in an inactive state
1370 static void bfin_mac_shutdown(struct net_device *dev)
1372 /* Turn off the EMAC */
1373 bfin_write_EMAC_OPMODE(0x00000000);
1374 /* Turn off the EMAC RX DMA */
1375 bfin_write_DMA1_CONFIG(0x0000);
1376 bfin_write_DMA2_CONFIG(0x0000);
1380 * Open and Initialize the interface
1382 * Set up everything, reset the card, etc..
1384 static int bfin_mac_open(struct net_device *dev)
1386 struct bfin_mac_local *lp = netdev_priv(dev);
1388 pr_debug("%s: %s\n", dev->name, __func__);
1391 * Check that the address is valid. If its not, refuse
1392 * to bring the device up. The user must specify an
1393 * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
1395 if (!is_valid_ether_addr(dev->dev_addr)) {
1396 printk(KERN_WARNING DRV_NAME ": no valid ethernet hw addr\n");
1400 /* initial rx and tx list */
1401 ret = desc_list_init();
1405 phy_start(lp->phydev);
1406 phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
1407 setup_system_regs(dev);
1408 setup_mac_addr(dev->dev_addr);
1411 ret = bfin_mac_enable(lp->phydev);
1414 pr_debug("hardware init finished\n");
1416 netif_start_queue(dev);
1417 netif_carrier_on(dev);
1423 * this makes the board clean up everything that it can
1424 * and not talk to the outside world. Caused by
1425 * an 'ifconfig ethX down'
1427 static int bfin_mac_close(struct net_device *dev)
1429 struct bfin_mac_local *lp = netdev_priv(dev);
1430 pr_debug("%s: %s\n", dev->name, __func__);
1432 netif_stop_queue(dev);
1433 netif_carrier_off(dev);
1435 phy_stop(lp->phydev);
1436 phy_write(lp->phydev, MII_BMCR, BMCR_PDOWN);
1438 /* clear everything */
1439 bfin_mac_shutdown(dev);
1441 /* free the rx/tx buffers */
1447 static const struct net_device_ops bfin_mac_netdev_ops = {
1448 .ndo_open = bfin_mac_open,
1449 .ndo_stop = bfin_mac_close,
1450 .ndo_start_xmit = bfin_mac_hard_start_xmit,
1451 .ndo_set_mac_address = bfin_mac_set_mac_address,
1452 .ndo_tx_timeout = bfin_mac_timeout,
1453 .ndo_set_multicast_list = bfin_mac_set_multicast_list,
1454 .ndo_do_ioctl = bfin_mac_ioctl,
1455 .ndo_validate_addr = eth_validate_addr,
1456 .ndo_change_mtu = eth_change_mtu,
1457 #ifdef CONFIG_NET_POLL_CONTROLLER
1458 .ndo_poll_controller = bfin_mac_poll,
1462 static int __devinit bfin_mac_probe(struct platform_device *pdev)
1464 struct net_device *ndev;
1465 struct bfin_mac_local *lp;
1466 struct platform_device *pd;
1467 struct bfin_mii_bus_platform_data *mii_bus_data;
1470 ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
1472 dev_err(&pdev->dev, "Cannot allocate net device!\n");
1476 SET_NETDEV_DEV(ndev, &pdev->dev);
1477 platform_set_drvdata(pdev, ndev);
1478 lp = netdev_priv(ndev);
1481 /* Grab the MAC address in the MAC */
1482 *(__le32 *) (&(ndev->dev_addr[0])) = cpu_to_le32(bfin_read_EMAC_ADDRLO());
1483 *(__le16 *) (&(ndev->dev_addr[4])) = cpu_to_le16((u16) bfin_read_EMAC_ADDRHI());
1486 /*todo: how to proble? which is revision_register */
1487 bfin_write_EMAC_ADDRLO(0x12345678);
1488 if (bfin_read_EMAC_ADDRLO() != 0x12345678) {
1489 dev_err(&pdev->dev, "Cannot detect Blackfin on-chip ethernet MAC controller!\n");
1491 goto out_err_probe_mac;
1496 * Is it valid? (Did bootloader initialize it?)
1497 * Grab the MAC from the board somehow
1498 * this is done in the arch/blackfin/mach-bfxxx/boards/eth_mac.c
1500 if (!is_valid_ether_addr(ndev->dev_addr))
1501 bfin_get_ether_addr(ndev->dev_addr);
1503 /* If still not valid, get a random one */
1504 if (!is_valid_ether_addr(ndev->dev_addr))
1505 random_ether_addr(ndev->dev_addr);
1507 setup_mac_addr(ndev->dev_addr);
1509 if (!pdev->dev.platform_data) {
1510 dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n");
1512 goto out_err_probe_mac;
1514 pd = pdev->dev.platform_data;
1515 lp->mii_bus = platform_get_drvdata(pd);
1517 dev_err(&pdev->dev, "Cannot get mii_bus!\n");
1519 goto out_err_probe_mac;
1521 lp->mii_bus->priv = ndev;
1522 mii_bus_data = pd->dev.platform_data;
1524 rc = mii_probe(ndev, mii_bus_data->phy_mode);
1526 dev_err(&pdev->dev, "MII Probe failed!\n");
1527 goto out_err_mii_probe;
1530 /* Fill in the fields of the device structure with ethernet values. */
1533 ndev->netdev_ops = &bfin_mac_netdev_ops;
1534 ndev->ethtool_ops = &bfin_mac_ethtool_ops;
1536 init_timer(&lp->tx_reclaim_timer);
1537 lp->tx_reclaim_timer.data = (unsigned long)lp;
1538 lp->tx_reclaim_timer.function = tx_reclaim_skb_timeout;
1540 spin_lock_init(&lp->lock);
1542 /* now, enable interrupts */
1543 /* register irq handler */
1544 rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt,
1545 IRQF_DISABLED, "EMAC_RX", ndev);
1547 dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n");
1549 goto out_err_request_irq;
1552 rc = register_netdev(ndev);
1554 dev_err(&pdev->dev, "Cannot register net device!\n");
1555 goto out_err_reg_ndev;
1558 bfin_mac_hwtstamp_init(ndev);
1560 /* now, print out the card info, in a short format.. */
1561 dev_info(&pdev->dev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
1566 free_irq(IRQ_MAC_RX, ndev);
1567 out_err_request_irq:
1569 mdiobus_unregister(lp->mii_bus);
1570 mdiobus_free(lp->mii_bus);
1572 platform_set_drvdata(pdev, NULL);
1578 static int __devexit bfin_mac_remove(struct platform_device *pdev)
1580 struct net_device *ndev = platform_get_drvdata(pdev);
1581 struct bfin_mac_local *lp = netdev_priv(ndev);
1583 platform_set_drvdata(pdev, NULL);
1585 lp->mii_bus->priv = NULL;
1587 unregister_netdev(ndev);
1589 free_irq(IRQ_MAC_RX, ndev);
1597 static int bfin_mac_suspend(struct platform_device *pdev, pm_message_t mesg)
1599 struct net_device *net_dev = platform_get_drvdata(pdev);
1600 struct bfin_mac_local *lp = netdev_priv(net_dev);
1603 bfin_write_EMAC_OPMODE((bfin_read_EMAC_OPMODE() & ~TE) | RE);
1604 bfin_write_EMAC_WKUP_CTL(MPKE);
1605 enable_irq_wake(IRQ_MAC_WAKEDET);
1607 if (netif_running(net_dev))
1608 bfin_mac_close(net_dev);
1614 static int bfin_mac_resume(struct platform_device *pdev)
1616 struct net_device *net_dev = platform_get_drvdata(pdev);
1617 struct bfin_mac_local *lp = netdev_priv(net_dev);
1620 bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
1621 bfin_write_EMAC_WKUP_CTL(0);
1622 disable_irq_wake(IRQ_MAC_WAKEDET);
1624 if (netif_running(net_dev))
1625 bfin_mac_open(net_dev);
1631 #define bfin_mac_suspend NULL
1632 #define bfin_mac_resume NULL
1633 #endif /* CONFIG_PM */
1635 static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
1637 struct mii_bus *miibus;
1638 struct bfin_mii_bus_platform_data *mii_bus_pd;
1639 const unsigned short *pin_req;
1642 mii_bus_pd = dev_get_platdata(&pdev->dev);
1644 dev_err(&pdev->dev, "No peripherals in platform data!\n");
1649 * We are setting up a network card,
1650 * so set the GPIO pins to Ethernet mode
1652 pin_req = mii_bus_pd->mac_peripherals;
1653 rc = peripheral_request_list(pin_req, DRV_NAME);
1655 dev_err(&pdev->dev, "Requesting peripherals failed!\n");
1660 miibus = mdiobus_alloc();
1663 miibus->read = bfin_mdiobus_read;
1664 miibus->write = bfin_mdiobus_write;
1665 miibus->reset = bfin_mdiobus_reset;
1667 miibus->parent = &pdev->dev;
1668 miibus->name = "bfin_mii_bus";
1669 miibus->phy_mask = mii_bus_pd->phy_mask;
1671 snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
1672 miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
1674 goto out_err_irq_alloc;
1676 for (i = rc; i < PHY_MAX_ADDR; ++i)
1677 miibus->irq[i] = PHY_POLL;
1679 rc = clamp(mii_bus_pd->phydev_number, 0, PHY_MAX_ADDR);
1680 if (rc != mii_bus_pd->phydev_number)
1681 dev_err(&pdev->dev, "Invalid number (%i) of phydevs\n",
1682 mii_bus_pd->phydev_number);
1683 for (i = 0; i < rc; ++i) {
1684 unsigned short phyaddr = mii_bus_pd->phydev_data[i].addr;
1685 if (phyaddr < PHY_MAX_ADDR)
1686 miibus->irq[phyaddr] = mii_bus_pd->phydev_data[i].irq;
1689 "Invalid PHY address %i for phydev %i\n",
1693 rc = mdiobus_register(miibus);
1695 dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
1696 goto out_err_mdiobus_register;
1699 platform_set_drvdata(pdev, miibus);
1702 out_err_mdiobus_register:
1705 mdiobus_free(miibus);
1707 peripheral_free_list(pin_req);
1712 static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
1714 struct mii_bus *miibus = platform_get_drvdata(pdev);
1715 struct bfin_mii_bus_platform_data *mii_bus_pd =
1716 dev_get_platdata(&pdev->dev);
1718 platform_set_drvdata(pdev, NULL);
1719 mdiobus_unregister(miibus);
1721 mdiobus_free(miibus);
1722 peripheral_free_list(mii_bus_pd->mac_peripherals);
1727 static struct platform_driver bfin_mii_bus_driver = {
1728 .probe = bfin_mii_bus_probe,
1729 .remove = __devexit_p(bfin_mii_bus_remove),
1731 .name = "bfin_mii_bus",
1732 .owner = THIS_MODULE,
1736 static struct platform_driver bfin_mac_driver = {
1737 .probe = bfin_mac_probe,
1738 .remove = __devexit_p(bfin_mac_remove),
1739 .resume = bfin_mac_resume,
1740 .suspend = bfin_mac_suspend,
1743 .owner = THIS_MODULE,
1747 static int __init bfin_mac_init(void)
1750 ret = platform_driver_register(&bfin_mii_bus_driver);
1752 return platform_driver_register(&bfin_mac_driver);
1756 module_init(bfin_mac_init);
1758 static void __exit bfin_mac_cleanup(void)
1760 platform_driver_unregister(&bfin_mac_driver);
1761 platform_driver_unregister(&bfin_mii_bus_driver);
1764 module_exit(bfin_mac_cleanup);