1 /* bnx2x_reg.h: Broadcom Everest network driver.
3 * Copyright (c) 2007-2009 Broadcom Corporation
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation.
9 * The registers description starts with the register Access type followed
10 * by size in bits. For example [RW 32]. The access types are:
14 * ST - Statistics register (clear on read)
16 * WB - Wide bus register - the size is over 32 bits and it should be
17 * read/write in consecutive 32 bits accesses
18 * WR - Write Clear (write 1 to clear the bit)
23 /* [R 19] Interrupt register #0 read */
24 #define BRB1_REG_BRB1_INT_STS 0x6011c
25 /* [RW 4] Parity mask register #0 read/write */
26 #define BRB1_REG_BRB1_PRTY_MASK 0x60138
27 /* [R 4] Parity register #0 read */
28 #define BRB1_REG_BRB1_PRTY_STS 0x6012c
29 /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
30 address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
31 BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */
32 #define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200
33 /* [RW 10] The number of free blocks above which the High_llfc signal to
34 interface #n is de-asserted. */
35 #define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c
36 /* [RW 10] The number of free blocks below which the High_llfc signal to
37 interface #n is asserted. */
38 #define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0 0x6013c
39 /* [RW 23] LL RAM data. */
40 #define BRB1_REG_LL_RAM 0x61000
41 /* [RW 10] The number of free blocks above which the Low_llfc signal to
42 interface #n is de-asserted. */
43 #define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0 0x6016c
44 /* [RW 10] The number of free blocks below which the Low_llfc signal to
45 interface #n is asserted. */
46 #define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c
47 /* [R 24] The number of full blocks. */
48 #define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090
49 /* [ST 32] The number of cycles that the write_full signal towards MAC #0
51 #define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8
52 #define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc
53 #define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8
54 /* [ST 32] The number of cycles that the pause signal towards MAC #0 was
56 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8
57 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc
58 /* [RW 10] Write client 0: De-assert pause threshold. */
59 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078
60 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c
61 /* [RW 10] Write client 0: Assert pause threshold. */
62 #define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
63 #define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c
64 /* [R 24] The number of full blocks occupied by port. */
65 #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094
66 /* [RW 1] Reset the design by software. */
67 #define BRB1_REG_SOFT_RESET 0x600dc
68 /* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
69 #define CCM_REG_CAM_OCCUP 0xd0188
70 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
71 acknowledge output is deasserted; all other signals are treated as usual;
72 if 1 - normal activity. */
73 #define CCM_REG_CCM_CFC_IFEN 0xd003c
74 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
75 disregarded; valid is deasserted; all other signals are treated as usual;
76 if 1 - normal activity. */
77 #define CCM_REG_CCM_CQM_IFEN 0xd000c
78 /* [RW 1] If set the Q index; received from the QM is inserted to event ID.
79 Otherwise 0 is inserted. */
80 #define CCM_REG_CCM_CQM_USE_Q 0xd00c0
81 /* [RW 11] Interrupt mask register #0 read/write */
82 #define CCM_REG_CCM_INT_MASK 0xd01e4
83 /* [R 11] Interrupt register #0 read */
84 #define CCM_REG_CCM_INT_STS 0xd01d8
85 /* [R 27] Parity register #0 read */
86 #define CCM_REG_CCM_PRTY_STS 0xd01e8
87 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
88 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
89 Is used to determine the number of the AG context REG-pairs written back;
90 when the input message Reg1WbFlg isn't set. */
91 #define CCM_REG_CCM_REG0_SZ 0xd00c4
92 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
93 disregarded; valid is deasserted; all other signals are treated as usual;
94 if 1 - normal activity. */
95 #define CCM_REG_CCM_STORM0_IFEN 0xd0004
96 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
97 disregarded; valid is deasserted; all other signals are treated as usual;
98 if 1 - normal activity. */
99 #define CCM_REG_CCM_STORM1_IFEN 0xd0008
100 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
101 disregarded; valid output is deasserted; all other signals are treated as
102 usual; if 1 - normal activity. */
103 #define CCM_REG_CDU_AG_RD_IFEN 0xd0030
104 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
105 are disregarded; all other signals are treated as usual; if 1 - normal
107 #define CCM_REG_CDU_AG_WR_IFEN 0xd002c
108 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
109 disregarded; valid output is deasserted; all other signals are treated as
110 usual; if 1 - normal activity. */
111 #define CCM_REG_CDU_SM_RD_IFEN 0xd0038
112 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
113 input is disregarded; all other signals are treated as usual; if 1 -
115 #define CCM_REG_CDU_SM_WR_IFEN 0xd0034
116 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
117 the initial credit value; read returns the current value of the credit
118 counter. Must be initialized to 1 at start-up. */
119 #define CCM_REG_CFC_INIT_CRD 0xd0204
120 /* [RW 2] Auxillary counter flag Q number 1. */
121 #define CCM_REG_CNT_AUX1_Q 0xd00c8
122 /* [RW 2] Auxillary counter flag Q number 2. */
123 #define CCM_REG_CNT_AUX2_Q 0xd00cc
124 /* [RW 28] The CM header value for QM request (primary). */
125 #define CCM_REG_CQM_CCM_HDR_P 0xd008c
126 /* [RW 28] The CM header value for QM request (secondary). */
127 #define CCM_REG_CQM_CCM_HDR_S 0xd0090
128 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
129 acknowledge output is deasserted; all other signals are treated as usual;
130 if 1 - normal activity. */
131 #define CCM_REG_CQM_CCM_IFEN 0xd0014
132 /* [RW 6] QM output initial credit. Max credit available - 32. Write writes
133 the initial credit value; read returns the current value of the credit
134 counter. Must be initialized to 32 at start-up. */
135 #define CCM_REG_CQM_INIT_CRD 0xd020c
136 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
137 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
138 prioritised); 2 stands for weight 2; tc. */
139 #define CCM_REG_CQM_P_WEIGHT 0xd00b8
140 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
141 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
142 prioritised); 2 stands for weight 2; tc. */
143 #define CCM_REG_CQM_S_WEIGHT 0xd00bc
144 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
145 acknowledge output is deasserted; all other signals are treated as usual;
146 if 1 - normal activity. */
147 #define CCM_REG_CSDM_IFEN 0xd0018
148 /* [RC 1] Set when the message length mismatch (relative to last indication)
149 at the SDM interface is detected. */
150 #define CCM_REG_CSDM_LENGTH_MIS 0xd0170
151 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
152 weight 8 (the most prioritised); 1 stands for weight 1(least
153 prioritised); 2 stands for weight 2; tc. */
154 #define CCM_REG_CSDM_WEIGHT 0xd00b4
155 /* [RW 28] The CM header for QM formatting in case of an error in the QM
157 #define CCM_REG_ERR_CCM_HDR 0xd0094
158 /* [RW 8] The Event ID in case the input message ErrorFlg is set. */
159 #define CCM_REG_ERR_EVNT_ID 0xd0098
160 /* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
161 writes the initial credit value; read returns the current value of the
162 credit counter. Must be initialized to 64 at start-up. */
163 #define CCM_REG_FIC0_INIT_CRD 0xd0210
164 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
165 writes the initial credit value; read returns the current value of the
166 credit counter. Must be initialized to 64 at start-up. */
167 #define CCM_REG_FIC1_INIT_CRD 0xd0214
168 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
169 - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr;
170 ~ccm_registers_gr_ld0_pr.gr_ld0_pr and
171 ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and
172 outputs to STORM: aggregation; load FIC0; load FIC1 and store. */
173 #define CCM_REG_GR_ARB_TYPE 0xd015c
174 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
175 highest priority is 3. It is supposed; that the Store channel priority is
176 the compliment to 4 of the rest priorities - Aggregation channel; Load
177 (FIC0) channel and Load (FIC1). */
178 #define CCM_REG_GR_LD0_PR 0xd0164
179 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
180 highest priority is 3. It is supposed; that the Store channel priority is
181 the compliment to 4 of the rest priorities - Aggregation channel; Load
182 (FIC0) channel and Load (FIC1). */
183 #define CCM_REG_GR_LD1_PR 0xd0168
184 /* [RW 2] General flags index. */
185 #define CCM_REG_INV_DONE_Q 0xd0108
186 /* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM
187 context and sent to STORM; for a specific connection type. The double
188 REG-pairs are used in order to align to STORM context row size of 128
189 bits. The offset of these data in the STORM context is always 0. Index
190 _(0..15) stands for the connection type (one of 16). */
191 #define CCM_REG_N_SM_CTX_LD_0 0xd004c
192 #define CCM_REG_N_SM_CTX_LD_1 0xd0050
193 #define CCM_REG_N_SM_CTX_LD_10 0xd0074
194 #define CCM_REG_N_SM_CTX_LD_11 0xd0078
195 #define CCM_REG_N_SM_CTX_LD_12 0xd007c
196 #define CCM_REG_N_SM_CTX_LD_13 0xd0080
197 #define CCM_REG_N_SM_CTX_LD_14 0xd0084
198 #define CCM_REG_N_SM_CTX_LD_15 0xd0088
199 #define CCM_REG_N_SM_CTX_LD_2 0xd0054
200 #define CCM_REG_N_SM_CTX_LD_3 0xd0058
201 #define CCM_REG_N_SM_CTX_LD_4 0xd005c
202 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
203 acknowledge output is deasserted; all other signals are treated as usual;
204 if 1 - normal activity. */
205 #define CCM_REG_PBF_IFEN 0xd0028
206 /* [RC 1] Set when the message length mismatch (relative to last indication)
207 at the pbf interface is detected. */
208 #define CCM_REG_PBF_LENGTH_MIS 0xd0180
209 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
210 weight 8 (the most prioritised); 1 stands for weight 1(least
211 prioritised); 2 stands for weight 2; tc. */
212 #define CCM_REG_PBF_WEIGHT 0xd00ac
213 #define CCM_REG_PHYS_QNUM1_0 0xd0134
214 #define CCM_REG_PHYS_QNUM1_1 0xd0138
215 #define CCM_REG_PHYS_QNUM2_0 0xd013c
216 #define CCM_REG_PHYS_QNUM2_1 0xd0140
217 #define CCM_REG_PHYS_QNUM3_0 0xd0144
218 #define CCM_REG_PHYS_QNUM3_1 0xd0148
219 #define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114
220 #define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118
221 #define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c
222 #define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120
223 #define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124
224 #define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128
225 #define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c
226 #define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130
227 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
228 disregarded; acknowledge output is deasserted; all other signals are
229 treated as usual; if 1 - normal activity. */
230 #define CCM_REG_STORM_CCM_IFEN 0xd0010
231 /* [RC 1] Set when the message length mismatch (relative to last indication)
232 at the STORM interface is detected. */
233 #define CCM_REG_STORM_LENGTH_MIS 0xd016c
234 /* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin)
235 mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for
236 weight 1(least prioritised); 2 stands for weight 2 (more prioritised);
238 #define CCM_REG_STORM_WEIGHT 0xd009c
239 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
240 disregarded; acknowledge output is deasserted; all other signals are
241 treated as usual; if 1 - normal activity. */
242 #define CCM_REG_TSEM_IFEN 0xd001c
243 /* [RC 1] Set when the message length mismatch (relative to last indication)
244 at the tsem interface is detected. */
245 #define CCM_REG_TSEM_LENGTH_MIS 0xd0174
246 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
247 weight 8 (the most prioritised); 1 stands for weight 1(least
248 prioritised); 2 stands for weight 2; tc. */
249 #define CCM_REG_TSEM_WEIGHT 0xd00a0
250 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
251 disregarded; acknowledge output is deasserted; all other signals are
252 treated as usual; if 1 - normal activity. */
253 #define CCM_REG_USEM_IFEN 0xd0024
254 /* [RC 1] Set when message length mismatch (relative to last indication) at
255 the usem interface is detected. */
256 #define CCM_REG_USEM_LENGTH_MIS 0xd017c
257 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
258 weight 8 (the most prioritised); 1 stands for weight 1(least
259 prioritised); 2 stands for weight 2; tc. */
260 #define CCM_REG_USEM_WEIGHT 0xd00a8
261 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is
262 disregarded; acknowledge output is deasserted; all other signals are
263 treated as usual; if 1 - normal activity. */
264 #define CCM_REG_XSEM_IFEN 0xd0020
265 /* [RC 1] Set when the message length mismatch (relative to last indication)
266 at the xsem interface is detected. */
267 #define CCM_REG_XSEM_LENGTH_MIS 0xd0178
268 /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
269 weight 8 (the most prioritised); 1 stands for weight 1(least
270 prioritised); 2 stands for weight 2; tc. */
271 #define CCM_REG_XSEM_WEIGHT 0xd00a4
272 /* [RW 19] Indirect access to the descriptor table of the XX protection
273 mechanism. The fields are: [5:0] - message length; [12:6] - message
274 pointer; 18:13] - next pointer. */
275 #define CCM_REG_XX_DESCR_TABLE 0xd0300
276 #define CCM_REG_XX_DESCR_TABLE_SIZE 36
277 /* [R 7] Used to read the value of XX protection Free counter. */
278 #define CCM_REG_XX_FREE 0xd0184
279 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
280 of the Input Stage XX protection buffer by the XX protection pending
281 messages. Max credit available - 127. Write writes the initial credit
282 value; read returns the current value of the credit counter. Must be
283 initialized to maximum XX protected message size - 2 at start-up. */
284 #define CCM_REG_XX_INIT_CRD 0xd0220
285 /* [RW 7] The maximum number of pending messages; which may be stored in XX
286 protection. At read the ~ccm_registers_xx_free.xx_free counter is read.
287 At write comprises the start value of the ~ccm_registers_xx_free.xx_free
289 #define CCM_REG_XX_MSG_NUM 0xd0224
290 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
291 #define CCM_REG_XX_OVFL_EVNT_ID 0xd0044
292 /* [RW 18] Indirect access to the XX table of the XX protection mechanism.
293 The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] -
295 #define CCM_REG_XX_TABLE 0xd0280
296 #define CDU_REG_CDU_CHK_MASK0 0x101000
297 #define CDU_REG_CDU_CHK_MASK1 0x101004
298 #define CDU_REG_CDU_CONTROL0 0x101008
299 #define CDU_REG_CDU_DEBUG 0x101010
300 #define CDU_REG_CDU_GLOBAL_PARAMS 0x101020
301 /* [RW 7] Interrupt mask register #0 read/write */
302 #define CDU_REG_CDU_INT_MASK 0x10103c
303 /* [R 7] Interrupt register #0 read */
304 #define CDU_REG_CDU_INT_STS 0x101030
305 /* [RW 5] Parity mask register #0 read/write */
306 #define CDU_REG_CDU_PRTY_MASK 0x10104c
307 /* [R 5] Parity register #0 read */
308 #define CDU_REG_CDU_PRTY_STS 0x101040
309 /* [RC 32] logging of error data in case of a CDU load error:
310 {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
311 ype_error; ctual_active; ctual_compressed_context}; */
312 #define CDU_REG_ERROR_DATA 0x101014
313 /* [WB 216] L1TT ram access. each entry has the following format :
314 {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0];
315 ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */
316 #define CDU_REG_L1TT 0x101800
317 /* [WB 24] MATT ram access. each entry has the following
318 format:{RegionLength[11:0]; egionOffset[11:0]} */
319 #define CDU_REG_MATT 0x101100
320 /* [RW 1] when this bit is set the CDU operates in e1hmf mode */
321 #define CDU_REG_MF_MODE 0x101050
322 /* [R 1] indication the initializing the activity counter by the hardware
324 #define CFC_REG_AC_INIT_DONE 0x104078
325 /* [RW 13] activity counter ram access */
326 #define CFC_REG_ACTIVITY_COUNTER 0x104400
327 #define CFC_REG_ACTIVITY_COUNTER_SIZE 256
328 /* [R 1] indication the initializing the cams by the hardware was done. */
329 #define CFC_REG_CAM_INIT_DONE 0x10407c
330 /* [RW 2] Interrupt mask register #0 read/write */
331 #define CFC_REG_CFC_INT_MASK 0x104108
332 /* [R 2] Interrupt register #0 read */
333 #define CFC_REG_CFC_INT_STS 0x1040fc
334 /* [RC 2] Interrupt register #0 read clear */
335 #define CFC_REG_CFC_INT_STS_CLR 0x104100
336 /* [RW 4] Parity mask register #0 read/write */
337 #define CFC_REG_CFC_PRTY_MASK 0x104118
338 /* [R 4] Parity register #0 read */
339 #define CFC_REG_CFC_PRTY_STS 0x10410c
340 /* [RW 21] CID cam access (21:1 - Data; alid - 0) */
341 #define CFC_REG_CID_CAM 0x104800
342 #define CFC_REG_CONTROL0 0x104028
343 #define CFC_REG_DEBUG0 0x104050
344 /* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error
345 vector) whether the cfc should be disabled upon it */
346 #define CFC_REG_DISABLE_ON_ERROR 0x104044
347 /* [RC 14] CFC error vector. when the CFC detects an internal error it will
348 set one of these bits. the bit description can be found in CFC
350 #define CFC_REG_ERROR_VECTOR 0x10403c
351 /* [WB 93] LCID info ram access */
352 #define CFC_REG_INFO_RAM 0x105000
353 #define CFC_REG_INFO_RAM_SIZE 1024
354 #define CFC_REG_INIT_REG 0x10404c
355 #define CFC_REG_INTERFACES 0x104058
356 /* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this
357 field allows changing the priorities of the weighted-round-robin arbiter
358 which selects which CFC load client should be served next */
359 #define CFC_REG_LCREQ_WEIGHTS 0x104084
360 /* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */
361 #define CFC_REG_LINK_LIST 0x104c00
362 #define CFC_REG_LINK_LIST_SIZE 256
363 /* [R 1] indication the initializing the link list by the hardware was done. */
364 #define CFC_REG_LL_INIT_DONE 0x104074
365 /* [R 9] Number of allocated LCIDs which are at empty state */
366 #define CFC_REG_NUM_LCIDS_ALLOC 0x104020
367 /* [R 9] Number of Arriving LCIDs in Link List Block */
368 #define CFC_REG_NUM_LCIDS_ARRIVING 0x104004
369 /* [R 9] Number of Leaving LCIDs in Link List Block */
370 #define CFC_REG_NUM_LCIDS_LEAVING 0x104018
371 /* [RW 8] The event id for aggregated interrupt 0 */
372 #define CSDM_REG_AGG_INT_EVENT_0 0xc2038
373 #define CSDM_REG_AGG_INT_EVENT_1 0xc203c
374 #define CSDM_REG_AGG_INT_EVENT_10 0xc2060
375 #define CSDM_REG_AGG_INT_EVENT_11 0xc2064
376 #define CSDM_REG_AGG_INT_EVENT_12 0xc2068
377 #define CSDM_REG_AGG_INT_EVENT_13 0xc206c
378 #define CSDM_REG_AGG_INT_EVENT_14 0xc2070
379 #define CSDM_REG_AGG_INT_EVENT_15 0xc2074
380 #define CSDM_REG_AGG_INT_EVENT_16 0xc2078
381 #define CSDM_REG_AGG_INT_EVENT_17 0xc207c
382 #define CSDM_REG_AGG_INT_EVENT_18 0xc2080
383 #define CSDM_REG_AGG_INT_EVENT_19 0xc2084
384 #define CSDM_REG_AGG_INT_EVENT_2 0xc2040
385 #define CSDM_REG_AGG_INT_EVENT_20 0xc2088
386 #define CSDM_REG_AGG_INT_EVENT_21 0xc208c
387 #define CSDM_REG_AGG_INT_EVENT_22 0xc2090
388 #define CSDM_REG_AGG_INT_EVENT_23 0xc2094
389 #define CSDM_REG_AGG_INT_EVENT_24 0xc2098
390 #define CSDM_REG_AGG_INT_EVENT_25 0xc209c
391 #define CSDM_REG_AGG_INT_EVENT_26 0xc20a0
392 #define CSDM_REG_AGG_INT_EVENT_27 0xc20a4
393 #define CSDM_REG_AGG_INT_EVENT_28 0xc20a8
394 #define CSDM_REG_AGG_INT_EVENT_29 0xc20ac
395 #define CSDM_REG_AGG_INT_EVENT_3 0xc2044
396 #define CSDM_REG_AGG_INT_EVENT_30 0xc20b0
397 #define CSDM_REG_AGG_INT_EVENT_31 0xc20b4
398 #define CSDM_REG_AGG_INT_EVENT_4 0xc2048
399 /* [RW 1] The T bit for aggregated interrupt 0 */
400 #define CSDM_REG_AGG_INT_T_0 0xc20b8
401 #define CSDM_REG_AGG_INT_T_1 0xc20bc
402 #define CSDM_REG_AGG_INT_T_10 0xc20e0
403 #define CSDM_REG_AGG_INT_T_11 0xc20e4
404 #define CSDM_REG_AGG_INT_T_12 0xc20e8
405 #define CSDM_REG_AGG_INT_T_13 0xc20ec
406 #define CSDM_REG_AGG_INT_T_14 0xc20f0
407 #define CSDM_REG_AGG_INT_T_15 0xc20f4
408 #define CSDM_REG_AGG_INT_T_16 0xc20f8
409 #define CSDM_REG_AGG_INT_T_17 0xc20fc
410 #define CSDM_REG_AGG_INT_T_18 0xc2100
411 #define CSDM_REG_AGG_INT_T_19 0xc2104
412 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
413 #define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
414 /* [RW 16] The maximum value of the competion counter #0 */
415 #define CSDM_REG_CMP_COUNTER_MAX0 0xc201c
416 /* [RW 16] The maximum value of the competion counter #1 */
417 #define CSDM_REG_CMP_COUNTER_MAX1 0xc2020
418 /* [RW 16] The maximum value of the competion counter #2 */
419 #define CSDM_REG_CMP_COUNTER_MAX2 0xc2024
420 /* [RW 16] The maximum value of the competion counter #3 */
421 #define CSDM_REG_CMP_COUNTER_MAX3 0xc2028
422 /* [RW 13] The start address in the internal RAM for the completion
424 #define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c
425 /* [RW 32] Interrupt mask register #0 read/write */
426 #define CSDM_REG_CSDM_INT_MASK_0 0xc229c
427 #define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
428 /* [R 32] Interrupt register #0 read */
429 #define CSDM_REG_CSDM_INT_STS_0 0xc2290
430 #define CSDM_REG_CSDM_INT_STS_1 0xc22a0
431 /* [RW 11] Parity mask register #0 read/write */
432 #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
433 /* [R 11] Parity register #0 read */
434 #define CSDM_REG_CSDM_PRTY_STS 0xc22b0
435 #define CSDM_REG_ENABLE_IN1 0xc2238
436 #define CSDM_REG_ENABLE_IN2 0xc223c
437 #define CSDM_REG_ENABLE_OUT1 0xc2240
438 #define CSDM_REG_ENABLE_OUT2 0xc2244
439 /* [RW 4] The initial number of messages that can be sent to the pxp control
440 interface without receiving any ACK. */
441 #define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc
442 /* [ST 32] The number of ACK after placement messages received */
443 #define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c
444 /* [ST 32] The number of packet end messages received from the parser */
445 #define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274
446 /* [ST 32] The number of requests received from the pxp async if */
447 #define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278
448 /* [ST 32] The number of commands received in queue 0 */
449 #define CSDM_REG_NUM_OF_Q0_CMD 0xc2248
450 /* [ST 32] The number of commands received in queue 10 */
451 #define CSDM_REG_NUM_OF_Q10_CMD 0xc226c
452 /* [ST 32] The number of commands received in queue 11 */
453 #define CSDM_REG_NUM_OF_Q11_CMD 0xc2270
454 /* [ST 32] The number of commands received in queue 1 */
455 #define CSDM_REG_NUM_OF_Q1_CMD 0xc224c
456 /* [ST 32] The number of commands received in queue 3 */
457 #define CSDM_REG_NUM_OF_Q3_CMD 0xc2250
458 /* [ST 32] The number of commands received in queue 4 */
459 #define CSDM_REG_NUM_OF_Q4_CMD 0xc2254
460 /* [ST 32] The number of commands received in queue 5 */
461 #define CSDM_REG_NUM_OF_Q5_CMD 0xc2258
462 /* [ST 32] The number of commands received in queue 6 */
463 #define CSDM_REG_NUM_OF_Q6_CMD 0xc225c
464 /* [ST 32] The number of commands received in queue 7 */
465 #define CSDM_REG_NUM_OF_Q7_CMD 0xc2260
466 /* [ST 32] The number of commands received in queue 8 */
467 #define CSDM_REG_NUM_OF_Q8_CMD 0xc2264
468 /* [ST 32] The number of commands received in queue 9 */
469 #define CSDM_REG_NUM_OF_Q9_CMD 0xc2268
470 /* [RW 13] The start address in the internal RAM for queue counters */
471 #define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010
472 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
473 #define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548
474 /* [R 1] parser fifo empty in sdm_sync block */
475 #define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550
476 /* [R 1] parser serial fifo empty in sdm_sync block */
477 #define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558
478 /* [RW 32] Tick for timer counter. Applicable only when
479 ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */
480 #define CSDM_REG_TIMER_TICK 0xc2000
481 /* [RW 5] The number of time_slots in the arbitration cycle */
482 #define CSEM_REG_ARB_CYCLE_SIZE 0x200034
483 /* [RW 3] The source that is associated with arbitration element 0. Source
484 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
485 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
486 #define CSEM_REG_ARB_ELEMENT0 0x200020
487 /* [RW 3] The source that is associated with arbitration element 1. Source
488 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
489 sleeping thread with priority 1; 4- sleeping thread with priority 2.
490 Could not be equal to register ~csem_registers_arb_element0.arb_element0 */
491 #define CSEM_REG_ARB_ELEMENT1 0x200024
492 /* [RW 3] The source that is associated with arbitration element 2. Source
493 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
494 sleeping thread with priority 1; 4- sleeping thread with priority 2.
495 Could not be equal to register ~csem_registers_arb_element0.arb_element0
496 and ~csem_registers_arb_element1.arb_element1 */
497 #define CSEM_REG_ARB_ELEMENT2 0x200028
498 /* [RW 3] The source that is associated with arbitration element 3. Source
499 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
500 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
501 not be equal to register ~csem_registers_arb_element0.arb_element0 and
502 ~csem_registers_arb_element1.arb_element1 and
503 ~csem_registers_arb_element2.arb_element2 */
504 #define CSEM_REG_ARB_ELEMENT3 0x20002c
505 /* [RW 3] The source that is associated with arbitration element 4. Source
506 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
507 sleeping thread with priority 1; 4- sleeping thread with priority 2.
508 Could not be equal to register ~csem_registers_arb_element0.arb_element0
509 and ~csem_registers_arb_element1.arb_element1 and
510 ~csem_registers_arb_element2.arb_element2 and
511 ~csem_registers_arb_element3.arb_element3 */
512 #define CSEM_REG_ARB_ELEMENT4 0x200030
513 /* [RW 32] Interrupt mask register #0 read/write */
514 #define CSEM_REG_CSEM_INT_MASK_0 0x200110
515 #define CSEM_REG_CSEM_INT_MASK_1 0x200120
516 /* [R 32] Interrupt register #0 read */
517 #define CSEM_REG_CSEM_INT_STS_0 0x200104
518 #define CSEM_REG_CSEM_INT_STS_1 0x200114
519 /* [RW 32] Parity mask register #0 read/write */
520 #define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
521 #define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
522 /* [R 32] Parity register #0 read */
523 #define CSEM_REG_CSEM_PRTY_STS_0 0x200124
524 #define CSEM_REG_CSEM_PRTY_STS_1 0x200134
525 #define CSEM_REG_ENABLE_IN 0x2000a4
526 #define CSEM_REG_ENABLE_OUT 0x2000a8
527 /* [RW 32] This address space contains all registers and memories that are
528 placed in SEM_FAST block. The SEM_FAST registers are described in
529 appendix B. In order to access the sem_fast registers the base address
530 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
531 #define CSEM_REG_FAST_MEMORY 0x220000
532 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
534 #define CSEM_REG_FIC0_DISABLE 0x200224
535 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
537 #define CSEM_REG_FIC1_DISABLE 0x200234
538 /* [RW 15] Interrupt table Read and write access to it is not possible in
539 the middle of the work */
540 #define CSEM_REG_INT_TABLE 0x200400
541 /* [ST 24] Statistics register. The number of messages that entered through
543 #define CSEM_REG_MSG_NUM_FIC0 0x200000
544 /* [ST 24] Statistics register. The number of messages that entered through
546 #define CSEM_REG_MSG_NUM_FIC1 0x200004
547 /* [ST 24] Statistics register. The number of messages that were sent to
549 #define CSEM_REG_MSG_NUM_FOC0 0x200008
550 /* [ST 24] Statistics register. The number of messages that were sent to
552 #define CSEM_REG_MSG_NUM_FOC1 0x20000c
553 /* [ST 24] Statistics register. The number of messages that were sent to
555 #define CSEM_REG_MSG_NUM_FOC2 0x200010
556 /* [ST 24] Statistics register. The number of messages that were sent to
558 #define CSEM_REG_MSG_NUM_FOC3 0x200014
559 /* [RW 1] Disables input messages from the passive buffer May be updated
560 during run_time by the microcode */
561 #define CSEM_REG_PAS_DISABLE 0x20024c
562 /* [WB 128] Debug only. Passive buffer memory */
563 #define CSEM_REG_PASSIVE_BUFFER 0x202000
564 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
565 #define CSEM_REG_PRAM 0x240000
566 /* [R 16] Valid sleeping threads indication have bit per thread */
567 #define CSEM_REG_SLEEP_THREADS_VALID 0x20026c
568 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
569 #define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0
570 /* [RW 16] List of free threads . There is a bit per thread. */
571 #define CSEM_REG_THREADS_LIST 0x2002e4
572 /* [RW 3] The arbitration scheme of time_slot 0 */
573 #define CSEM_REG_TS_0_AS 0x200038
574 /* [RW 3] The arbitration scheme of time_slot 10 */
575 #define CSEM_REG_TS_10_AS 0x200060
576 /* [RW 3] The arbitration scheme of time_slot 11 */
577 #define CSEM_REG_TS_11_AS 0x200064
578 /* [RW 3] The arbitration scheme of time_slot 12 */
579 #define CSEM_REG_TS_12_AS 0x200068
580 /* [RW 3] The arbitration scheme of time_slot 13 */
581 #define CSEM_REG_TS_13_AS 0x20006c
582 /* [RW 3] The arbitration scheme of time_slot 14 */
583 #define CSEM_REG_TS_14_AS 0x200070
584 /* [RW 3] The arbitration scheme of time_slot 15 */
585 #define CSEM_REG_TS_15_AS 0x200074
586 /* [RW 3] The arbitration scheme of time_slot 16 */
587 #define CSEM_REG_TS_16_AS 0x200078
588 /* [RW 3] The arbitration scheme of time_slot 17 */
589 #define CSEM_REG_TS_17_AS 0x20007c
590 /* [RW 3] The arbitration scheme of time_slot 18 */
591 #define CSEM_REG_TS_18_AS 0x200080
592 /* [RW 3] The arbitration scheme of time_slot 1 */
593 #define CSEM_REG_TS_1_AS 0x20003c
594 /* [RW 3] The arbitration scheme of time_slot 2 */
595 #define CSEM_REG_TS_2_AS 0x200040
596 /* [RW 3] The arbitration scheme of time_slot 3 */
597 #define CSEM_REG_TS_3_AS 0x200044
598 /* [RW 3] The arbitration scheme of time_slot 4 */
599 #define CSEM_REG_TS_4_AS 0x200048
600 /* [RW 3] The arbitration scheme of time_slot 5 */
601 #define CSEM_REG_TS_5_AS 0x20004c
602 /* [RW 3] The arbitration scheme of time_slot 6 */
603 #define CSEM_REG_TS_6_AS 0x200050
604 /* [RW 3] The arbitration scheme of time_slot 7 */
605 #define CSEM_REG_TS_7_AS 0x200054
606 /* [RW 3] The arbitration scheme of time_slot 8 */
607 #define CSEM_REG_TS_8_AS 0x200058
608 /* [RW 3] The arbitration scheme of time_slot 9 */
609 #define CSEM_REG_TS_9_AS 0x20005c
610 /* [RW 1] Parity mask register #0 read/write */
611 #define DBG_REG_DBG_PRTY_MASK 0xc0a8
612 /* [R 1] Parity register #0 read */
613 #define DBG_REG_DBG_PRTY_STS 0xc09c
614 /* [RW 32] Commands memory. The address to command X; row Y is to calculated
616 #define DMAE_REG_CMD_MEM 0x102400
617 #define DMAE_REG_CMD_MEM_SIZE 224
618 /* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c
619 initial value is all ones. */
620 #define DMAE_REG_CRC16C_INIT 0x10201c
621 /* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the
622 CRC-16 T10 initial value is all ones. */
623 #define DMAE_REG_CRC16T10_INIT 0x102020
624 /* [RW 2] Interrupt mask register #0 read/write */
625 #define DMAE_REG_DMAE_INT_MASK 0x102054
626 /* [RW 4] Parity mask register #0 read/write */
627 #define DMAE_REG_DMAE_PRTY_MASK 0x102064
628 /* [R 4] Parity register #0 read */
629 #define DMAE_REG_DMAE_PRTY_STS 0x102058
630 /* [RW 1] Command 0 go. */
631 #define DMAE_REG_GO_C0 0x102080
632 /* [RW 1] Command 1 go. */
633 #define DMAE_REG_GO_C1 0x102084
634 /* [RW 1] Command 10 go. */
635 #define DMAE_REG_GO_C10 0x102088
636 #define DMAE_REG_GO_C10_SIZE 1
637 /* [RW 1] Command 11 go. */
638 #define DMAE_REG_GO_C11 0x10208c
639 #define DMAE_REG_GO_C11_SIZE 1
640 /* [RW 1] Command 12 go. */
641 #define DMAE_REG_GO_C12 0x102090
642 #define DMAE_REG_GO_C12_SIZE 1
643 /* [RW 1] Command 13 go. */
644 #define DMAE_REG_GO_C13 0x102094
645 #define DMAE_REG_GO_C13_SIZE 1
646 /* [RW 1] Command 14 go. */
647 #define DMAE_REG_GO_C14 0x102098
648 #define DMAE_REG_GO_C14_SIZE 1
649 /* [RW 1] Command 15 go. */
650 #define DMAE_REG_GO_C15 0x10209c
651 #define DMAE_REG_GO_C15_SIZE 1
652 /* [RW 1] Command 10 go. */
653 #define DMAE_REG_GO_C10 0x102088
654 /* [RW 1] Command 11 go. */
655 #define DMAE_REG_GO_C11 0x10208c
656 /* [RW 1] Command 12 go. */
657 #define DMAE_REG_GO_C12 0x102090
658 /* [RW 1] Command 13 go. */
659 #define DMAE_REG_GO_C13 0x102094
660 /* [RW 1] Command 14 go. */
661 #define DMAE_REG_GO_C14 0x102098
662 /* [RW 1] Command 15 go. */
663 #define DMAE_REG_GO_C15 0x10209c
664 /* [RW 1] Command 2 go. */
665 #define DMAE_REG_GO_C2 0x1020a0
666 /* [RW 1] Command 3 go. */
667 #define DMAE_REG_GO_C3 0x1020a4
668 /* [RW 1] Command 4 go. */
669 #define DMAE_REG_GO_C4 0x1020a8
670 /* [RW 1] Command 5 go. */
671 #define DMAE_REG_GO_C5 0x1020ac
672 /* [RW 1] Command 6 go. */
673 #define DMAE_REG_GO_C6 0x1020b0
674 /* [RW 1] Command 7 go. */
675 #define DMAE_REG_GO_C7 0x1020b4
676 /* [RW 1] Command 8 go. */
677 #define DMAE_REG_GO_C8 0x1020b8
678 /* [RW 1] Command 9 go. */
679 #define DMAE_REG_GO_C9 0x1020bc
680 /* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge
681 input is disregarded; valid is deasserted; all other signals are treated
682 as usual; if 1 - normal activity. */
683 #define DMAE_REG_GRC_IFEN 0x102008
684 /* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the
685 acknowledge input is disregarded; valid is deasserted; full is asserted;
686 all other signals are treated as usual; if 1 - normal activity. */
687 #define DMAE_REG_PCI_IFEN 0x102004
688 /* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the
689 initial value to the credit counter; related to the address. Read returns
690 the current value of the counter. */
691 #define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0
692 /* [RW 8] Aggregation command. */
693 #define DORQ_REG_AGG_CMD0 0x170060
694 /* [RW 8] Aggregation command. */
695 #define DORQ_REG_AGG_CMD1 0x170064
696 /* [RW 8] Aggregation command. */
697 #define DORQ_REG_AGG_CMD2 0x170068
698 /* [RW 8] Aggregation command. */
699 #define DORQ_REG_AGG_CMD3 0x17006c
700 /* [RW 28] UCM Header. */
701 #define DORQ_REG_CMHEAD_RX 0x170050
702 /* [RW 32] Doorbell address for RBC doorbells (function 0). */
703 #define DORQ_REG_DB_ADDR0 0x17008c
704 /* [RW 5] Interrupt mask register #0 read/write */
705 #define DORQ_REG_DORQ_INT_MASK 0x170180
706 /* [R 5] Interrupt register #0 read */
707 #define DORQ_REG_DORQ_INT_STS 0x170174
708 /* [RC 5] Interrupt register #0 read clear */
709 #define DORQ_REG_DORQ_INT_STS_CLR 0x170178
710 /* [RW 2] Parity mask register #0 read/write */
711 #define DORQ_REG_DORQ_PRTY_MASK 0x170190
712 /* [R 2] Parity register #0 read */
713 #define DORQ_REG_DORQ_PRTY_STS 0x170184
714 /* [RW 8] The address to write the DPM CID to STORM. */
715 #define DORQ_REG_DPM_CID_ADDR 0x170044
716 /* [RW 5] The DPM mode CID extraction offset. */
717 #define DORQ_REG_DPM_CID_OFST 0x170030
718 /* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */
719 #define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c
720 /* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */
721 #define DORQ_REG_DQ_FIFO_FULL_TH 0x170078
722 /* [R 13] Current value of the DQ FIFO fill level according to following
723 pointer. The range is 0 - 256 FIFO rows; where each row stands for the
725 #define DORQ_REG_DQ_FILL_LVLF 0x1700a4
726 /* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or
727 equal to full threshold; reset on full clear. */
728 #define DORQ_REG_DQ_FULL_ST 0x1700c0
729 /* [RW 28] The value sent to CM header in the case of CFC load error. */
730 #define DORQ_REG_ERR_CMHEAD 0x170058
731 #define DORQ_REG_IF_EN 0x170004
732 #define DORQ_REG_MODE_ACT 0x170008
733 /* [RW 5] The normal mode CID extraction offset. */
734 #define DORQ_REG_NORM_CID_OFST 0x17002c
735 /* [RW 28] TCM Header when only TCP context is loaded. */
736 #define DORQ_REG_NORM_CMHEAD_TX 0x17004c
737 /* [RW 3] The number of simultaneous outstanding requests to Context Fetch
739 #define DORQ_REG_OUTST_REQ 0x17003c
740 #define DORQ_REG_REGN 0x170038
741 /* [R 4] Current value of response A counter credit. Initial credit is
742 configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
744 #define DORQ_REG_RSPA_CRD_CNT 0x1700ac
745 /* [R 4] Current value of response B counter credit. Initial credit is
746 configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
748 #define DORQ_REG_RSPB_CRD_CNT 0x1700b0
749 /* [RW 4] The initial credit at the Doorbell Response Interface. The write
750 writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The
751 read reads this written value. */
752 #define DORQ_REG_RSP_INIT_CRD 0x170048
753 /* [RW 4] Initial activity counter value on the load request; when the
755 #define DORQ_REG_SHRT_ACT_CNT 0x170070
756 /* [RW 28] TCM Header when both ULP and TCP context is loaded. */
757 #define DORQ_REG_SHRT_CMHEAD 0x170054
758 #define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4)
759 #define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3)
760 #define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1<<7)
761 #define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2)
762 #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1)
763 #define HC_REG_AGG_INT_0 0x108050
764 #define HC_REG_AGG_INT_1 0x108054
765 #define HC_REG_ATTN_BIT 0x108120
766 #define HC_REG_ATTN_IDX 0x108100
767 #define HC_REG_ATTN_MSG0_ADDR_L 0x108018
768 #define HC_REG_ATTN_MSG1_ADDR_L 0x108020
769 #define HC_REG_ATTN_NUM_P0 0x108038
770 #define HC_REG_ATTN_NUM_P1 0x10803c
771 #define HC_REG_COMMAND_REG 0x108180
772 #define HC_REG_CONFIG_0 0x108000
773 #define HC_REG_CONFIG_1 0x108004
774 #define HC_REG_FUNC_NUM_P0 0x1080ac
775 #define HC_REG_FUNC_NUM_P1 0x1080b0
776 /* [RW 3] Parity mask register #0 read/write */
777 #define HC_REG_HC_PRTY_MASK 0x1080a0
778 /* [R 3] Parity register #0 read */
779 #define HC_REG_HC_PRTY_STS 0x108094
780 #define HC_REG_INT_MASK 0x108108
781 #define HC_REG_LEADING_EDGE_0 0x108040
782 #define HC_REG_LEADING_EDGE_1 0x108048
783 #define HC_REG_P0_PROD_CONS 0x108200
784 #define HC_REG_P1_PROD_CONS 0x108400
785 #define HC_REG_PBA_COMMAND 0x108140
786 #define HC_REG_PCI_CONFIG_0 0x108010
787 #define HC_REG_PCI_CONFIG_1 0x108014
788 #define HC_REG_STATISTIC_COUNTERS 0x109000
789 #define HC_REG_TRAILING_EDGE_0 0x108044
790 #define HC_REG_TRAILING_EDGE_1 0x10804c
791 #define HC_REG_UC_RAM_ADDR_0 0x108028
792 #define HC_REG_UC_RAM_ADDR_1 0x108030
793 #define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068
794 #define HC_REG_VQID_0 0x108008
795 #define HC_REG_VQID_1 0x10800c
796 #define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424
797 #define MCP_REG_MCPR_NVM_ADDR 0x8640c
798 #define MCP_REG_MCPR_NVM_CFG4 0x8642c
799 #define MCP_REG_MCPR_NVM_COMMAND 0x86400
800 #define MCP_REG_MCPR_NVM_READ 0x86410
801 #define MCP_REG_MCPR_NVM_SW_ARB 0x86420
802 #define MCP_REG_MCPR_NVM_WRITE 0x86408
803 #define MCP_REG_MCPR_NVM_WRITE1 0x86428
804 #define MCP_REG_MCPR_SCRATCH 0xa0000
805 /* [R 32] read first 32 bit after inversion of function 0. mapped as
806 follows: [0] NIG attention for function0; [1] NIG attention for
807 function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
808 [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
809 GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
810 glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
811 [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
812 MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
813 Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
814 interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
815 error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
816 interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF
817 Parity error; [31] PBF Hw interrupt; */
818 #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c
819 #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430
820 /* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0]
821 NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
822 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
823 [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
824 PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
825 function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
826 Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
827 mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
828 BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
829 Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
830 interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
831 Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
833 #define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434
834 /* [R 32] read second 32 bit after inversion of function 0. mapped as
835 follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
836 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
837 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
838 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
839 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
840 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
841 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
842 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
843 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
844 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
845 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
847 #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438
848 #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c
849 /* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0]
850 PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error;
851 [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
852 [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9]
853 XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
854 DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
855 error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
856 PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
857 [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
858 [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
859 [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
860 [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
861 #define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440
862 /* [R 32] read third 32 bit after inversion of function 0. mapped as
863 follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity
864 error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5]
865 PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
866 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
867 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
868 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
869 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
870 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
871 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
872 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
873 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
875 #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444
876 #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448
877 /* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0]
878 CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP
879 Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient
880 Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity
881 error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw
882 interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14]
883 MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17]
884 Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW
885 timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3
886 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1
887 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW
888 timers attn_4 func1; [30] General attn0; [31] General attn1; */
889 #define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c
890 /* [R 32] read fourth 32 bit after inversion of function 0. mapped as
891 follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
892 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
893 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
894 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
895 [14] General attn16; [15] General attn17; [16] General attn18; [17]
896 General attn19; [18] General attn20; [19] General attn21; [20] Main power
897 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
898 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
899 Latched timeout attention; [27] GRC Latched reserved access attention;
900 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
901 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
902 #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450
903 #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454
904 /* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0]
905 General attn2; [1] General attn3; [2] General attn4; [3] General attn5;
906 [4] General attn6; [5] General attn7; [6] General attn8; [7] General
907 attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11]
908 General attn13; [12] General attn14; [13] General attn15; [14] General
909 attn16; [15] General attn17; [16] General attn18; [17] General attn19;
910 [18] General attn20; [19] General attn21; [20] Main power interrupt; [21]
911 RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24]
912 RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout
913 attention; [27] GRC Latched reserved access attention; [28] MCP Latched
914 rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
915 ump_tx_parity; [31] MCP Latched scpad_parity; */
916 #define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458
917 /* [W 14] write to this register results with the clear of the latched
918 signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
919 d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
920 latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
921 GRC Latched reserved access attention; one in d7 clears Latched
922 rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
923 Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both
924 ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears
925 pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read
926 from this register return zero */
927 #define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c
928 /* [RW 32] first 32b for enabling the output for function 0 output0. mapped
929 as follows: [0] NIG attention for function0; [1] NIG attention for
930 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
931 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
932 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
933 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
934 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
935 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
936 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
937 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
938 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
939 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
940 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
941 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c
942 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c
943 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c
944 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c
945 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc
946 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc
947 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc
948 /* [RW 32] first 32b for enabling the output for function 1 output0. mapped
949 as follows: [0] NIG attention for function0; [1] NIG attention for
950 function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
951 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
952 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
953 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
954 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
955 SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
956 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
957 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
958 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
959 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
960 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
961 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c
962 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c
963 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c
964 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c
965 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c
966 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c
967 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c
968 /* [RW 32] first 32b for enabling the output for close the gate nig. mapped
969 as follows: [0] NIG attention for function0; [1] NIG attention for
970 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
971 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
972 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
973 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
974 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
975 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
976 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
977 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
978 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
979 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
980 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
981 #define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec
982 #define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c
983 /* [RW 32] first 32b for enabling the output for close the gate pxp. mapped
984 as follows: [0] NIG attention for function0; [1] NIG attention for
985 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
986 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
987 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
988 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
989 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
990 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
991 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
992 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
993 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
994 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
995 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
996 #define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc
997 #define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c
998 /* [RW 32] second 32b for enabling the output for function 0 output0. mapped
999 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1000 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1001 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1002 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1003 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1004 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1005 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1006 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1007 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1008 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1009 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1011 #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070
1012 #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080
1013 /* [RW 32] second 32b for enabling the output for function 1 output0. mapped
1014 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1015 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1016 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1017 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1018 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1019 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1020 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1021 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1022 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1023 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1024 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1026 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110
1027 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120
1028 /* [RW 32] second 32b for enabling the output for close the gate nig. mapped
1029 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1030 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1031 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1032 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1033 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1034 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1035 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1036 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1037 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1038 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1039 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1041 #define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0
1042 #define MISC_REG_AEU_ENABLE2_NIG_1 0xa190
1043 /* [RW 32] second 32b for enabling the output for close the gate pxp. mapped
1044 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1045 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1046 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1047 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1048 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1049 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1050 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1051 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1052 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1053 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1054 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1056 #define MISC_REG_AEU_ENABLE2_PXP_0 0xa100
1057 #define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0
1058 /* [RW 32] third 32b for enabling the output for function 0 output0. mapped
1059 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1060 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1061 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1062 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1063 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1064 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1065 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1066 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1067 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1068 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1069 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1071 #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074
1072 #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084
1073 /* [RW 32] third 32b for enabling the output for function 1 output0. mapped
1074 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1075 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1076 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1077 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1078 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1079 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1080 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1081 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1082 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1083 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1084 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1086 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114
1087 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124
1088 /* [RW 32] third 32b for enabling the output for close the gate nig. mapped
1089 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1090 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1091 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1092 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1093 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1094 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1095 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1096 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1097 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1098 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1099 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1101 #define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4
1102 #define MISC_REG_AEU_ENABLE3_NIG_1 0xa194
1103 /* [RW 32] third 32b for enabling the output for close the gate pxp. mapped
1104 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1105 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1106 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1107 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1108 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1109 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1110 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1111 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1112 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1113 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1114 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1116 #define MISC_REG_AEU_ENABLE3_PXP_0 0xa104
1117 #define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4
1118 /* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped
1119 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1120 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1121 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1122 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1123 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1124 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1125 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1126 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1127 Latched timeout attention; [27] GRC Latched reserved access attention;
1128 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1129 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1130 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078
1131 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098
1132 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8
1133 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8
1134 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8
1135 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8
1136 /* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped
1137 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1138 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1139 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1140 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1141 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1142 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1143 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1144 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1145 Latched timeout attention; [27] GRC Latched reserved access attention;
1146 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1147 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1148 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118
1149 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138
1150 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158
1151 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168
1152 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178
1153 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188
1154 /* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped
1155 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1156 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1157 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1158 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1159 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1160 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1161 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1162 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1163 Latched timeout attention; [27] GRC Latched reserved access attention;
1164 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1165 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1166 #define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8
1167 #define MISC_REG_AEU_ENABLE4_NIG_1 0xa198
1168 /* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped
1169 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1170 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1171 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1172 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1173 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1174 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1175 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1176 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1177 Latched timeout attention; [27] GRC Latched reserved access attention;
1178 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1179 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1180 #define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
1181 #define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
1182 /* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
1184 #define MISC_REG_AEU_GENERAL_ATTN_0 0xa000
1185 #define MISC_REG_AEU_GENERAL_ATTN_1 0xa004
1186 #define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
1187 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
1188 #define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
1189 #define MISC_REG_AEU_GENERAL_ATTN_13 0xa034
1190 #define MISC_REG_AEU_GENERAL_ATTN_14 0xa038
1191 #define MISC_REG_AEU_GENERAL_ATTN_15 0xa03c
1192 #define MISC_REG_AEU_GENERAL_ATTN_16 0xa040
1193 #define MISC_REG_AEU_GENERAL_ATTN_17 0xa044
1194 #define MISC_REG_AEU_GENERAL_ATTN_18 0xa048
1195 #define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c
1196 #define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
1197 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
1198 #define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
1199 #define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
1200 #define MISC_REG_AEU_GENERAL_ATTN_20 0xa050
1201 #define MISC_REG_AEU_GENERAL_ATTN_21 0xa054
1202 #define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c
1203 #define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
1204 #define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
1205 #define MISC_REG_AEU_GENERAL_ATTN_6 0xa018
1206 #define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c
1207 #define MISC_REG_AEU_GENERAL_ATTN_8 0xa020
1208 #define MISC_REG_AEU_GENERAL_ATTN_9 0xa024
1209 #define MISC_REG_AEU_GENERAL_MASK 0xa61c
1210 /* [RW 32] first 32b for inverting the input for function 0; for each bit:
1211 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
1212 function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
1213 [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1;
1214 [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1215 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1216 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1217 SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication
1218 for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS
1219 Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw
1220 interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM
1221 Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI
1222 Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1223 #define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c
1224 #define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c
1225 /* [RW 32] second 32b for inverting the input for function 0; for each bit:
1226 0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity
1227 error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw
1228 interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM
1229 Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw
1230 interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
1231 DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
1232 error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
1233 PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
1234 [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
1235 [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
1236 [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
1237 [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
1238 #define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230
1239 #define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240
1240 /* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0;
1241 [9:8] = raserved. Zero = mask; one = unmask */
1242 #define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060
1243 #define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064
1244 /* [RW 1] If set a system kill occurred */
1245 #define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610
1246 /* [RW 32] Represent the status of the input vector to the AEU when a system
1247 kill occurred. The register is reset in por reset. Mapped as follows: [0]
1248 NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
1249 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
1250 [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
1251 PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
1252 function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
1253 Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
1254 mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
1255 BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
1256 Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
1257 interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
1258 Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
1260 #define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600
1261 #define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604
1262 #define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608
1263 #define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c
1264 /* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1
1266 #define MISC_REG_BOND_ID 0xa400
1267 /* [R 8] These bits indicate the metal revision of the chip. This value
1268 starts at 0x00 for each all-layer tape-out and increments by one for each
1270 #define MISC_REG_CHIP_METAL 0xa404
1271 /* [R 16] These bits indicate the part number for the chip. */
1272 #define MISC_REG_CHIP_NUM 0xa408
1273 /* [R 4] These bits indicate the base revision of the chip. This value
1274 starts at 0x0 for the A0 tape-out and increments by one for each
1275 all-layer tape-out. */
1276 #define MISC_REG_CHIP_REV 0xa40c
1277 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1278 32 clients. Each client can be controlled by one driver only. One in each
1279 bit represent that this driver control the appropriate client (Ex: bit 5
1280 is set means this driver control client number 5). addr1 = set; addr0 =
1281 clear; read from both addresses will give the same result = status. write
1282 to address 1 will set a request to control all the clients that their
1283 appropriate bit (in the write command) is set. if the client is free (the
1284 appropriate bit in all the other drivers is clear) one will be written to
1285 that driver register; if the client isn't free the bit will remain zero.
1286 if the appropriate bit is set (the driver request to gain control on a
1287 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1288 interrupt will be asserted). write to address 0 will set a request to
1289 free all the clients that their appropriate bit (in the write command) is
1290 set. if the appropriate bit is clear (the driver request to free a client
1291 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1293 #define MISC_REG_DRIVER_CONTROL_10 0xa3e0
1294 #define MISC_REG_DRIVER_CONTROL_10_SIZE 2
1295 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1296 32 clients. Each client can be controlled by one driver only. One in each
1297 bit represent that this driver control the appropriate client (Ex: bit 5
1298 is set means this driver control client number 5). addr1 = set; addr0 =
1299 clear; read from both addresses will give the same result = status. write
1300 to address 1 will set a request to control all the clients that their
1301 appropriate bit (in the write command) is set. if the client is free (the
1302 appropriate bit in all the other drivers is clear) one will be written to
1303 that driver register; if the client isn't free the bit will remain zero.
1304 if the appropriate bit is set (the driver request to gain control on a
1305 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1306 interrupt will be asserted). write to address 0 will set a request to
1307 free all the clients that their appropriate bit (in the write command) is
1308 set. if the appropriate bit is clear (the driver request to free a client
1309 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1311 #define MISC_REG_DRIVER_CONTROL_11 0xa3e8
1312 #define MISC_REG_DRIVER_CONTROL_11_SIZE 2
1313 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1314 32 clients. Each client can be controlled by one driver only. One in each
1315 bit represent that this driver control the appropriate client (Ex: bit 5
1316 is set means this driver control client number 5). addr1 = set; addr0 =
1317 clear; read from both addresses will give the same result = status. write
1318 to address 1 will set a request to control all the clients that their
1319 appropriate bit (in the write command) is set. if the client is free (the
1320 appropriate bit in all the other drivers is clear) one will be written to
1321 that driver register; if the client isn't free the bit will remain zero.
1322 if the appropriate bit is set (the driver request to gain control on a
1323 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1324 interrupt will be asserted). write to address 0 will set a request to
1325 free all the clients that their appropriate bit (in the write command) is
1326 set. if the appropriate bit is clear (the driver request to free a client
1327 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1329 #define MISC_REG_DRIVER_CONTROL_12 0xa3f0
1330 #define MISC_REG_DRIVER_CONTROL_12_SIZE 2
1331 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1332 32 clients. Each client can be controlled by one driver only. One in each
1333 bit represent that this driver control the appropriate client (Ex: bit 5
1334 is set means this driver control client number 5). addr1 = set; addr0 =
1335 clear; read from both addresses will give the same result = status. write
1336 to address 1 will set a request to control all the clients that their
1337 appropriate bit (in the write command) is set. if the client is free (the
1338 appropriate bit in all the other drivers is clear) one will be written to
1339 that driver register; if the client isn't free the bit will remain zero.
1340 if the appropriate bit is set (the driver request to gain control on a
1341 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1342 interrupt will be asserted). write to address 0 will set a request to
1343 free all the clients that their appropriate bit (in the write command) is
1344 set. if the appropriate bit is clear (the driver request to free a client
1345 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1347 #define MISC_REG_DRIVER_CONTROL_13 0xa3f8
1348 #define MISC_REG_DRIVER_CONTROL_13_SIZE 2
1349 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1350 32 clients. Each client can be controlled by one driver only. One in each
1351 bit represent that this driver control the appropriate client (Ex: bit 5
1352 is set means this driver control client number 5). addr1 = set; addr0 =
1353 clear; read from both addresses will give the same result = status. write
1354 to address 1 will set a request to control all the clients that their
1355 appropriate bit (in the write command) is set. if the client is free (the
1356 appropriate bit in all the other drivers is clear) one will be written to
1357 that driver register; if the client isn't free the bit will remain zero.
1358 if the appropriate bit is set (the driver request to gain control on a
1359 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1360 interrupt will be asserted). write to address 0 will set a request to
1361 free all the clients that their appropriate bit (in the write command) is
1362 set. if the appropriate bit is clear (the driver request to free a client
1363 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1365 #define MISC_REG_DRIVER_CONTROL_1 0xa510
1366 #define MISC_REG_DRIVER_CONTROL_14 0xa5e0
1367 #define MISC_REG_DRIVER_CONTROL_14_SIZE 2
1368 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1369 32 clients. Each client can be controlled by one driver only. One in each
1370 bit represent that this driver control the appropriate client (Ex: bit 5
1371 is set means this driver control client number 5). addr1 = set; addr0 =
1372 clear; read from both addresses will give the same result = status. write
1373 to address 1 will set a request to control all the clients that their
1374 appropriate bit (in the write command) is set. if the client is free (the
1375 appropriate bit in all the other drivers is clear) one will be written to
1376 that driver register; if the client isn't free the bit will remain zero.
1377 if the appropriate bit is set (the driver request to gain control on a
1378 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1379 interrupt will be asserted). write to address 0 will set a request to
1380 free all the clients that their appropriate bit (in the write command) is
1381 set. if the appropriate bit is clear (the driver request to free a client
1382 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1384 #define MISC_REG_DRIVER_CONTROL_15 0xa5e8
1385 #define MISC_REG_DRIVER_CONTROL_15_SIZE 2
1386 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1387 32 clients. Each client can be controlled by one driver only. One in each
1388 bit represent that this driver control the appropriate client (Ex: bit 5
1389 is set means this driver control client number 5). addr1 = set; addr0 =
1390 clear; read from both addresses will give the same result = status. write
1391 to address 1 will set a request to control all the clients that their
1392 appropriate bit (in the write command) is set. if the client is free (the
1393 appropriate bit in all the other drivers is clear) one will be written to
1394 that driver register; if the client isn't free the bit will remain zero.
1395 if the appropriate bit is set (the driver request to gain control on a
1396 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1397 interrupt will be asserted). write to address 0 will set a request to
1398 free all the clients that their appropriate bit (in the write command) is
1399 set. if the appropriate bit is clear (the driver request to free a client
1400 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1402 #define MISC_REG_DRIVER_CONTROL_16 0xa5f0
1403 #define MISC_REG_DRIVER_CONTROL_16_SIZE 2
1404 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1405 32 clients. Each client can be controlled by one driver only. One in each
1406 bit represent that this driver control the appropriate client (Ex: bit 5
1407 is set means this driver control client number 5). addr1 = set; addr0 =
1408 clear; read from both addresses will give the same result = status. write
1409 to address 1 will set a request to control all the clients that their
1410 appropriate bit (in the write command) is set. if the client is free (the
1411 appropriate bit in all the other drivers is clear) one will be written to
1412 that driver register; if the client isn't free the bit will remain zero.
1413 if the appropriate bit is set (the driver request to gain control on a
1414 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1415 interrupt will be asserted). write to address 0 will set a request to
1416 free all the clients that their appropriate bit (in the write command) is
1417 set. if the appropriate bit is clear (the driver request to free a client
1418 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1420 #define MISC_REG_DRIVER_CONTROL_7 0xa3c8
1421 /* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
1423 #define MISC_REG_E1HMF_MODE 0xa5f8
1424 /* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
1425 these bits is written as a '1'; the corresponding SPIO bit will turn off
1426 it's drivers and become an input. This is the reset state of all GPIO
1427 pins. The read value of these bits will be a '1' if that last command
1428 (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
1429 [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
1430 as a '1'; the corresponding GPIO bit will drive low. The read value of
1431 these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
1432 this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
1433 SET When any of these bits is written as a '1'; the corresponding GPIO
1434 bit will drive high (if it has that capability). The read value of these
1435 bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
1436 bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
1437 RO; These bits indicate the read value of each of the eight GPIO pins.
1438 This is the result value of the pin; not the drive value. Writing these
1439 bits will have not effect. */
1440 #define MISC_REG_GPIO 0xa490
1441 /* [RW 8] These bits enable the GPIO_INTs to signals event to the
1442 IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2]
1443 p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2;
1445 #define MISC_REG_GPIO_EVENT_EN 0xa2bc
1446 /* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a
1447 '1' to these bit clears the corresponding bit in the #OLD_VALUE register.
1448 This will acknowledge an interrupt on the falling edge of corresponding
1449 GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0;
1450 Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE
1451 register. This will acknowledge an interrupt on the rising edge of
1452 corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1;
1453 OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input
1454 value. When the ~INT_STATE bit is set; this bit indicates the OLD value
1455 of the pin such that if ~INT_STATE is set and this bit is '0'; then the
1456 interrupt is due to a low to high edge. If ~INT_STATE is set and this bit
1457 is '1'; then the interrupt is due to a high to low edge (reset value 0).
1458 [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the
1459 current GPIO interrupt state for each GPIO pin. This bit is cleared when
1460 the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is
1461 set when the GPIO input does not match the current value in #OLD_VALUE
1463 #define MISC_REG_GPIO_INT 0xa494
1464 /* [R 28] this field hold the last information that caused reserved
1465 attention. bits [19:0] - address; [22:20] function; [23] reserved;
1466 [27:24] the master that caused the attention - according to the following
1467 encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
1469 #define MISC_REG_GRC_RSV_ATTN 0xa3c0
1470 /* [R 28] this field hold the last information that caused timeout
1471 attention. bits [19:0] - address; [22:20] function; [23] reserved;
1472 [27:24] the master that caused the attention - according to the following
1473 encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
1475 #define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4
1476 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
1477 access that does not finish within
1478 ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
1479 cleared; this timeout is disabled. If this timeout occurs; the GRC shall
1480 assert it attention output. */
1481 #define MISC_REG_GRC_TIMEOUT_EN 0xa280
1482 /* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of
1483 the bits is: [2:0] OAC reset value 001) CML output buffer bias control;
1484 111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl
1485 (reset value 001) Charge pump current control; 111 for 720u; 011 for
1486 600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00)
1487 Global bias control; When bit 7 is high bias current will be 10 0gh; When
1488 bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8]
1489 Pll_observe (reset value 010) Bits to control observability. bit 10 is
1490 for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl
1491 (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V
1492 and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning
1493 sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted
1494 internally). [14] reserved (reset value 0) Reset for VCO sequencer is
1495 connected to RESET input directly. [15] capRetry_en (reset value 0)
1496 enable retry on cap search failure (inverted). [16] freqMonitor_e (reset
1497 value 0) bit to continuously monitor vco freq (inverted). [17]
1498 freqDetRestart_en (reset value 0) bit to enable restart when not freq
1499 locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable
1500 retry on freq det failure(inverted). [19] pllForceFdone_en (reset value
1501 0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20]
1502 pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass
1503 (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value
1504 0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0)
1505 bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to
1506 enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force
1507 capPass. [26] capRestart (reset value 0) bit to force cap sequencer to
1508 restart. [27] capSelectM_en (reset value 0) bit to enable cap select
1510 #define MISC_REG_LCPLL_CTRL_1 0xa2a4
1511 #define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8
1512 /* [RW 4] Interrupt mask register #0 read/write */
1513 #define MISC_REG_MISC_INT_MASK 0xa388
1514 /* [RW 1] Parity mask register #0 read/write */
1515 #define MISC_REG_MISC_PRTY_MASK 0xa398
1516 /* [R 1] Parity register #0 read */
1517 #define MISC_REG_MISC_PRTY_STS 0xa38c
1518 #define MISC_REG_NIG_WOL_P0 0xa270
1519 #define MISC_REG_NIG_WOL_P1 0xa274
1520 /* [R 1] If set indicate that the pcie_rst_b was asserted without perst
1522 #define MISC_REG_PCIE_HOT_RESET 0xa618
1523 /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
1524 inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
1525 divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
1526 divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2
1527 divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2
1528 divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9]
1529 freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1]
1530 (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value
1531 1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16]
1532 Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset
1533 value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value
1534 1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0);
1535 [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25]
1536 Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27]
1537 testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29]
1538 testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31]
1539 testa_en (reset value 0); */
1540 #define MISC_REG_PLL_STORM_CTRL_1 0xa294
1541 #define MISC_REG_PLL_STORM_CTRL_2 0xa298
1542 #define MISC_REG_PLL_STORM_CTRL_3 0xa29c
1543 #define MISC_REG_PLL_STORM_CTRL_4 0xa2a0
1544 /* [RW 32] reset reg#2; rite/read one = the specific block is out of reset;
1545 write/read zero = the specific block is in reset; addr 0-wr- the write
1546 value will be written to the register; addr 1-set - one will be written
1547 to all the bits that have the value of one in the data written (bits that
1548 have the value of zero will not be change) ; addr 2-clear - zero will be
1549 written to all the bits that have the value of one in the data written
1550 (bits that have the value of zero will not be change); addr 3-ignore;
1551 read ignore from all addr except addr 00; inside order of the bits is:
1552 [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc;
1553 [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7]
1554 rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn;
1555 [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13]
1556 Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16]
1557 rst_pxp_rq_rd_wr; 31:17] reserved */
1558 #define MISC_REG_RESET_REG_2 0xa590
1559 /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
1560 shared with the driver resides */
1561 #define MISC_REG_SHARED_MEM_ADDR 0xa2b4
1562 /* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
1563 the corresponding SPIO bit will turn off it's drivers and become an
1564 input. This is the reset state of all SPIO pins. The read value of these
1565 bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
1566 bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
1567 is written as a '1'; the corresponding SPIO bit will drive low. The read
1568 value of these bits will be a '1' if that last command (#SET; #CLR; or
1569 #FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
1570 these bits is written as a '1'; the corresponding SPIO bit will drive
1571 high (if it has that capability). The read value of these bits will be a
1572 '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
1573 (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
1574 each of the eight SPIO pins. This is the result value of the pin; not the
1575 drive value. Writing these bits will have not effect. Each 8 bits field
1576 is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
1577 from VAUX. (This is an output pin only; the FLOAT field is not applicable
1578 for this pin); [1] VAUX Disable; when pulsed low; disables supply form
1579 VAUX. (This is an output pin only; FLOAT field is not applicable for this
1580 pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
1581 select VAUX supply. (This is an output pin only; it is not controlled by
1582 the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
1583 field is not applicable for this pin; only the VALUE fields is relevant -
1584 it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6]
1585 Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
1586 device ID select; read by UMP firmware. */
1587 #define MISC_REG_SPIO 0xa4fc
1588 /* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
1589 according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
1591 #define MISC_REG_SPIO_EVENT_EN 0xa2b8
1592 /* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
1593 corresponding bit in the #OLD_VALUE register. This will acknowledge an
1594 interrupt on the falling edge of corresponding SPIO input (reset value
1595 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
1596 in the #OLD_VALUE register. This will acknowledge an interrupt on the
1597 rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
1598 RO; These bits indicate the old value of the SPIO input value. When the
1599 ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
1600 that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
1601 to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
1602 interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
1603 RO; These bits indicate the current SPIO interrupt state for each SPIO
1604 pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
1605 command bit is written. This bit is set when the SPIO input does not
1606 match the current value in #OLD_VALUE (reset value 0). */
1607 #define MISC_REG_SPIO_INT 0xa500
1608 /* [RW 32] reload value for counter 4 if reload; the value will be reload if
1609 the counter reached zero and the reload bit
1610 (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
1611 #define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc
1612 /* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
1613 in this register. addres 0 - timer 1; address - timer 2�address 7 -
1615 #define MISC_REG_SW_TIMER_VAL 0xa5c0
1616 /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
1617 loaded; 0-prepare; -unprepare */
1618 #define MISC_REG_UNPREPARED 0xa424
1619 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
1620 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
1621 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
1622 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18)
1623 /* [RW 1] Input enable for RX_BMAC0 IF */
1624 #define NIG_REG_BMAC0_IN_EN 0x100ac
1625 /* [RW 1] output enable for TX_BMAC0 IF */
1626 #define NIG_REG_BMAC0_OUT_EN 0x100e0
1627 /* [RW 1] output enable for TX BMAC pause port 0 IF */
1628 #define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110
1629 /* [RW 1] output enable for RX_BMAC0_REGS IF */
1630 #define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8
1631 /* [RW 1] output enable for RX BRB1 port0 IF */
1632 #define NIG_REG_BRB0_OUT_EN 0x100f8
1633 /* [RW 1] Input enable for TX BRB1 pause port 0 IF */
1634 #define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4
1635 /* [RW 1] output enable for RX BRB1 port1 IF */
1636 #define NIG_REG_BRB1_OUT_EN 0x100fc
1637 /* [RW 1] Input enable for TX BRB1 pause port 1 IF */
1638 #define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8
1639 /* [RW 1] output enable for RX BRB1 LP IF */
1640 #define NIG_REG_BRB_LB_OUT_EN 0x10100
1641 /* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
1642 error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush;
1643 72:73]-vnic_num; 81:74]-sideband_info */
1644 #define NIG_REG_DEBUG_PACKET_LB 0x10800
1645 /* [RW 1] Input enable for TX Debug packet */
1646 #define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc
1647 /* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all
1648 packets from PBFare not forwarded to the MAC and just deleted from FIFO.
1649 First packet may be deleted from the middle. And last packet will be
1650 always deleted till the end. */
1651 #define NIG_REG_EGRESS_DRAIN0_MODE 0x10060
1652 /* [RW 1] Output enable to EMAC0 */
1653 #define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120
1654 /* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
1655 to emac for port0; other way to bmac for port0 */
1656 #define NIG_REG_EGRESS_EMAC0_PORT 0x10058
1657 /* [RW 32] TX_MNG_FIFO in NIG_TX_PORT0; data[31:0] written in FIFO order. */
1658 #define NIG_REG_EGRESS_MNG0_FIFO 0x1045c
1659 /* [RW 1] Input enable for TX PBF user packet port0 IF */
1660 #define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc
1661 /* [RW 1] Input enable for TX PBF user packet port1 IF */
1662 #define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0
1663 /* [RW 1] Input enable for RX_EMAC0 IF */
1664 #define NIG_REG_EMAC0_IN_EN 0x100a4
1665 /* [RW 1] output enable for TX EMAC pause port 0 IF */
1666 #define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118
1667 /* [R 1] status from emac0. This bit is set when MDINT from either the
1668 EXT_MDINT pin or from the Copper PHY is driven low. This condition must
1669 be cleared in the attached PHY device that is driving the MINT pin. */
1670 #define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494
1671 /* [WB 48] This address space contains BMAC0 registers. The BMAC registers
1672 are described in appendix A. In order to access the BMAC0 registers; the
1673 base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be
1674 added to each BMAC register offset */
1675 #define NIG_REG_INGRESS_BMAC0_MEM 0x10c00
1676 /* [WB 48] This address space contains BMAC1 registers. The BMAC registers
1677 are described in appendix A. In order to access the BMAC0 registers; the
1678 base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be
1679 added to each BMAC register offset */
1680 #define NIG_REG_INGRESS_BMAC1_MEM 0x11000
1681 /* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */
1682 #define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0
1683 /* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
1684 packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */
1685 #define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
1686 /* [RW 1] led 10g for port 0 */
1687 #define NIG_REG_LED_10G_P0 0x10320
1688 /* [RW 1] led 10g for port 1 */
1689 #define NIG_REG_LED_10G_P1 0x10324
1690 /* [RW 1] Port0: This bit is set to enable the use of the
1691 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
1692 defined below. If this bit is cleared; then the blink rate will be about
1694 #define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318
1695 /* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for
1696 Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field
1697 is reset to 0x080; giving a default blink period of approximately 8Hz. */
1698 #define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310
1699 /* [RW 1] Port0: If set along with the
1700 ~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0
1701 bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
1702 bit; the Traffic LED will blink with the blink rate specified in
1703 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
1704 ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
1706 #define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308
1707 /* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The
1708 Traffic LED will then be controlled via bit ~nig_registers_
1709 led_control_traffic_p0.led_control_traffic_p0 and bit
1710 ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */
1711 #define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8
1712 /* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit;
1713 turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also
1714 set; the LED will blink with blink rate specified in
1715 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
1716 ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
1718 #define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300
1719 /* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
1720 9-11PHY7; 12 MAC4; 13-15 PHY10; */
1721 #define NIG_REG_LED_MODE_P0 0x102f0
1722 /* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1-
1723 tsdm enable; b2- usdm enable */
1724 #define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070
1725 /* [RW 1] SAFC enable for port0. This register may get 1 only when
1726 ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
1728 #define NIG_REG_LLFC_ENABLE_0 0x16208
1729 /* [RW 16] classes are high-priority for port0 */
1730 #define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058
1731 /* [RW 16] classes are low-priority for port0 */
1732 #define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060
1733 /* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
1734 #define NIG_REG_LLFC_OUT_EN_0 0x160c8
1735 #define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c
1736 #define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154
1737 #define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
1738 #define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048
1739 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
1740 #define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c
1741 /* [RW 2] Determine the classification participants. 0: no classification.1:
1742 classification upon VLAN id. 2: classification upon MAC address. 3:
1743 classification upon both VLAN id & MAC addr. */
1744 #define NIG_REG_LLH0_CLS_TYPE 0x16080
1745 /* [RW 32] cm header for llh0 */
1746 #define NIG_REG_LLH0_CM_HEADER 0x1007c
1747 #define NIG_REG_LLH0_DEST_IP_0_1 0x101dc
1748 #define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0
1749 /* [RW 16] destination TCP address 1. The LLH will look for this address in
1750 all incoming packets. */
1751 #define NIG_REG_LLH0_DEST_TCP_0 0x10220
1752 /* [RW 16] destination UDP address 1 The LLH will look for this address in
1753 all incoming packets. */
1754 #define NIG_REG_LLH0_DEST_UDP_0 0x10214
1755 #define NIG_REG_LLH0_ERROR_MASK 0x1008c
1756 /* [RW 8] event id for llh0 */
1757 #define NIG_REG_LLH0_EVENT_ID 0x10084
1758 #define NIG_REG_LLH0_FUNC_EN 0x160fc
1759 #define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100
1760 /* [RW 1] Determine the IP version to look for in
1761 ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */
1762 #define NIG_REG_LLH0_IPV4_IPV6_0 0x10208
1763 /* [RW 1] t bit for llh0 */
1764 #define NIG_REG_LLH0_T_BIT 0x10074
1765 /* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */
1766 #define NIG_REG_LLH0_VLAN_ID_0 0x1022c
1767 /* [RW 8] init credit counter for port0 in LLH */
1768 #define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554
1769 #define NIG_REG_LLH0_XCM_MASK 0x10130
1770 #define NIG_REG_LLH1_BRB1_DRV_MASK 0x10248
1771 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
1772 #define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc
1773 /* [RW 2] Determine the classification participants. 0: no classification.1:
1774 classification upon VLAN id. 2: classification upon MAC address. 3:
1775 classification upon both VLAN id & MAC addr. */
1776 #define NIG_REG_LLH1_CLS_TYPE 0x16084
1777 /* [RW 32] cm header for llh1 */
1778 #define NIG_REG_LLH1_CM_HEADER 0x10080
1779 #define NIG_REG_LLH1_ERROR_MASK 0x10090
1780 /* [RW 8] event id for llh1 */
1781 #define NIG_REG_LLH1_EVENT_ID 0x10088
1782 /* [RW 8] init credit counter for port1 in LLH */
1783 #define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564
1784 #define NIG_REG_LLH1_XCM_MASK 0x10134
1785 /* [RW 1] When this bit is set; the LLH will expect all packets to be with
1787 #define NIG_REG_LLH_E1HOV_MODE 0x160d8
1788 /* [RW 1] When this bit is set; the LLH will classify the packet before
1789 sending it to the BRB or calculating WoL on it. */
1790 #define NIG_REG_LLH_MF_MODE 0x16024
1791 #define NIG_REG_MASK_INTERRUPT_PORT0 0x10330
1792 #define NIG_REG_MASK_INTERRUPT_PORT1 0x10334
1793 /* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
1794 #define NIG_REG_NIG_EMAC0_EN 0x1003c
1795 /* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */
1796 #define NIG_REG_NIG_EMAC1_EN 0x10040
1797 /* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the
1798 EMAC0 to strip the CRC from the ingress packets. */
1799 #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
1800 /* [R 32] Interrupt register #0 read */
1801 #define NIG_REG_NIG_INT_STS_0 0x103b0
1802 #define NIG_REG_NIG_INT_STS_1 0x103c0
1803 /* [R 32] Parity register #0 read */
1804 #define NIG_REG_NIG_PRTY_STS 0x103d0
1805 /* [RW 1] Pause enable for port0. This register may get 1 only when
1806 ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
1808 #define NIG_REG_PAUSE_ENABLE_0 0x160c0
1809 /* [RW 1] Input enable for RX PBF LP IF */
1810 #define NIG_REG_PBF_LB_IN_EN 0x100b4
1811 /* [RW 1] Value of this register will be transmitted to port swap when
1812 ~nig_registers_strap_override.strap_override =1 */
1813 #define NIG_REG_PORT_SWAP 0x10394
1814 /* [RW 1] output enable for RX parser descriptor IF */
1815 #define NIG_REG_PRS_EOP_OUT_EN 0x10104
1816 /* [RW 1] Input enable for RX parser request IF */
1817 #define NIG_REG_PRS_REQ_IN_EN 0x100b8
1818 /* [RW 5] control to serdes - CL45 DEVAD */
1819 #define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370
1820 /* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */
1821 #define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c
1822 /* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
1823 #define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374
1824 /* [R 1] status from serdes0 that inputs to interrupt logic of link status */
1825 #define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578
1826 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
1828 #define NIG_REG_STAT0_BRB_DISCARD 0x105f0
1829 /* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
1831 #define NIG_REG_STAT0_BRB_TRUNCATE 0x105f8
1832 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
1833 between 1024 and 1522 bytes for port0 */
1834 #define NIG_REG_STAT0_EGRESS_MAC_PKT0 0x10750
1835 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
1836 between 1523 bytes and above for port0 */
1837 #define NIG_REG_STAT0_EGRESS_MAC_PKT1 0x10760
1838 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
1840 #define NIG_REG_STAT1_BRB_DISCARD 0x10628
1841 /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
1842 between 1024 and 1522 bytes for port1 */
1843 #define NIG_REG_STAT1_EGRESS_MAC_PKT0 0x107a0
1844 /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
1845 between 1523 bytes and above for port1 */
1846 #define NIG_REG_STAT1_EGRESS_MAC_PKT1 0x107b0
1847 /* [WB_R 64] Rx statistics : User octets received for LP */
1848 #define NIG_REG_STAT2_BRB_OCTET 0x107e0
1849 #define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328
1850 #define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c
1851 /* [RW 1] port swap mux selection. If this register equal to 0 then port
1852 swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
1853 ort swap is equal to ~nig_registers_port_swap.port_swap */
1854 #define NIG_REG_STRAP_OVERRIDE 0x10398
1855 /* [RW 1] output enable for RX_XCM0 IF */
1856 #define NIG_REG_XCM0_OUT_EN 0x100f0
1857 /* [RW 1] output enable for RX_XCM1 IF */
1858 #define NIG_REG_XCM1_OUT_EN 0x100f4
1859 /* [RW 1] control to xgxs - remote PHY in-band MDIO */
1860 #define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348
1861 /* [RW 5] control to xgxs - CL45 DEVAD */
1862 #define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c
1863 /* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */
1864 #define NIG_REG_XGXS0_CTRL_MD_ST 0x10338
1865 /* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
1866 #define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340
1867 /* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
1868 #define NIG_REG_XGXS0_STATUS_LINK10G 0x10680
1869 /* [R 4] status from xgxs0 that inputs to interrupt logic of link status */
1870 #define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684
1871 /* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */
1872 #define NIG_REG_XGXS_LANE_SEL_P0 0x102e8
1873 /* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
1874 #define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0
1875 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9)
1876 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15)
1877 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18)
1878 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
1879 /* [RW 1] Disable processing further tasks from port 0 (after ending the
1880 current task in process). */
1881 #define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c
1882 /* [RW 1] Disable processing further tasks from port 1 (after ending the
1883 current task in process). */
1884 #define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060
1885 /* [RW 1] Disable processing further tasks from port 4 (after ending the
1886 current task in process). */
1887 #define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c
1888 #define PBF_REG_IF_ENABLE_REG 0x140044
1889 /* [RW 1] Init bit. When set the initial credits are copied to the credit
1890 registers (except the port credits). Should be set and then reset after
1891 the configuration of the block has ended. */
1892 #define PBF_REG_INIT 0x140000
1893 /* [RW 1] Init bit for port 0. When set the initial credit of port 0 is
1894 copied to the credit register. Should be set and then reset after the
1895 configuration of the port has ended. */
1896 #define PBF_REG_INIT_P0 0x140004
1897 /* [RW 1] Init bit for port 1. When set the initial credit of port 1 is
1898 copied to the credit register. Should be set and then reset after the
1899 configuration of the port has ended. */
1900 #define PBF_REG_INIT_P1 0x140008
1901 /* [RW 1] Init bit for port 4. When set the initial credit of port 4 is
1902 copied to the credit register. Should be set and then reset after the
1903 configuration of the port has ended. */
1904 #define PBF_REG_INIT_P4 0x14000c
1905 /* [RW 1] Enable for mac interface 0. */
1906 #define PBF_REG_MAC_IF0_ENABLE 0x140030
1907 /* [RW 1] Enable for mac interface 1. */
1908 #define PBF_REG_MAC_IF1_ENABLE 0x140034
1909 /* [RW 1] Enable for the loopback interface. */
1910 #define PBF_REG_MAC_LB_ENABLE 0x140040
1911 /* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause
1913 #define PBF_REG_P0_ARB_THRSH 0x1400e4
1914 /* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */
1915 #define PBF_REG_P0_CREDIT 0x140200
1916 /* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte
1918 #define PBF_REG_P0_INIT_CRD 0x1400d0
1919 /* [RW 1] Indication that pause is enabled for port 0. */
1920 #define PBF_REG_P0_PAUSE_ENABLE 0x140014
1921 /* [R 8] Number of tasks in port 0 task queue. */
1922 #define PBF_REG_P0_TASK_CNT 0x140204
1923 /* [R 11] Current credit for port 1 in the tx port buffers in 16 byte lines. */
1924 #define PBF_REG_P1_CREDIT 0x140208
1925 /* [RW 11] Initial credit for port 1 in the tx port buffers in 16 byte
1927 #define PBF_REG_P1_INIT_CRD 0x1400d4
1928 /* [R 8] Number of tasks in port 1 task queue. */
1929 #define PBF_REG_P1_TASK_CNT 0x14020c
1930 /* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */
1931 #define PBF_REG_P4_CREDIT 0x140210
1932 /* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte
1934 #define PBF_REG_P4_INIT_CRD 0x1400e0
1935 /* [R 8] Number of tasks in port 4 task queue. */
1936 #define PBF_REG_P4_TASK_CNT 0x140214
1937 /* [RW 5] Interrupt mask register #0 read/write */
1938 #define PBF_REG_PBF_INT_MASK 0x1401d4
1939 /* [R 5] Interrupt register #0 read */
1940 #define PBF_REG_PBF_INT_STS 0x1401c8
1941 #define PB_REG_CONTROL 0
1942 /* [RW 2] Interrupt mask register #0 read/write */
1943 #define PB_REG_PB_INT_MASK 0x28
1944 /* [R 2] Interrupt register #0 read */
1945 #define PB_REG_PB_INT_STS 0x1c
1946 /* [RW 4] Parity mask register #0 read/write */
1947 #define PB_REG_PB_PRTY_MASK 0x38
1948 /* [R 4] Parity register #0 read */
1949 #define PB_REG_PB_PRTY_STS 0x2c
1950 #define PRS_REG_A_PRSU_20 0x40134
1951 /* [R 8] debug only: CFC load request current credit. Transaction based. */
1952 #define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164
1953 /* [R 8] debug only: CFC search request current credit. Transaction based. */
1954 #define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168
1955 /* [RW 6] The initial credit for the search message to the CFC interface.
1956 Credit is transaction based. */
1957 #define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c
1958 /* [RW 24] CID for port 0 if no match */
1959 #define PRS_REG_CID_PORT_0 0x400fc
1960 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
1961 load response is reset and packet type is 0. Used in packet start message
1963 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc
1964 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0
1965 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4
1966 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8
1967 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec
1968 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5 0x400f0
1969 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
1970 load response is set and packet type is 0. Used in packet start message
1972 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc
1973 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0
1974 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4
1975 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8
1976 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc
1977 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5 0x400d0
1978 /* [RW 32] The CM header for a match and packet type 1 for loopback port.
1979 Used in packet start message to TCM. */
1980 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c
1981 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0
1982 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4
1983 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8
1984 /* [RW 32] The CM header for a match and packet type 0. Used in packet start
1986 #define PRS_REG_CM_HDR_TYPE_0 0x40078
1987 #define PRS_REG_CM_HDR_TYPE_1 0x4007c
1988 #define PRS_REG_CM_HDR_TYPE_2 0x40080
1989 #define PRS_REG_CM_HDR_TYPE_3 0x40084
1990 #define PRS_REG_CM_HDR_TYPE_4 0x40088
1991 /* [RW 32] The CM header in case there was not a match on the connection */
1992 #define PRS_REG_CM_NO_MATCH_HDR 0x400b8
1993 /* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */
1994 #define PRS_REG_E1HOV_MODE 0x401c8
1995 /* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet
1996 start message to TCM. */
1997 #define PRS_REG_EVENT_ID_1 0x40054
1998 #define PRS_REG_EVENT_ID_2 0x40058
1999 #define PRS_REG_EVENT_ID_3 0x4005c
2000 /* [RW 16] The Ethernet type value for FCoE */
2001 #define PRS_REG_FCOE_TYPE 0x401d0
2002 /* [RW 8] Context region for flush packet with packet type 0. Used in CFC
2003 load request message. */
2004 #define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004
2005 #define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008
2006 #define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c
2007 #define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010
2008 #define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014
2009 #define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018
2010 #define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c
2011 #define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020
2012 /* [RW 4] The increment value to send in the CFC load request message */
2013 #define PRS_REG_INC_VALUE 0x40048
2014 /* [RW 1] If set indicates not to send messages to CFC on received packets */
2015 #define PRS_REG_NIC_MODE 0x40138
2016 /* [RW 8] The 8-bit event ID for cases where there is no match on the
2017 connection. Used in packet start message to TCM. */
2018 #define PRS_REG_NO_MATCH_EVENT_ID 0x40070
2019 /* [ST 24] The number of input CFC flush packets */
2020 #define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128
2021 /* [ST 32] The number of cycles the Parser halted its operation since it
2022 could not allocate the next serial number */
2023 #define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130
2024 /* [ST 24] The number of input packets */
2025 #define PRS_REG_NUM_OF_PACKETS 0x40124
2026 /* [ST 24] The number of input transparent flush packets */
2027 #define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c
2028 /* [RW 8] Context region for received Ethernet packet with a match and
2029 packet type 0. Used in CFC load request message */
2030 #define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028
2031 #define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c
2032 #define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030
2033 #define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034
2034 #define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038
2035 #define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c
2036 #define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040
2037 #define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044
2038 /* [R 2] debug only: Number of pending requests for CAC on port 0. */
2039 #define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174
2040 /* [R 2] debug only: Number of pending requests for header parsing. */
2041 #define PRS_REG_PENDING_BRB_PRS_RQ 0x40170
2042 /* [R 1] Interrupt register #0 read */
2043 #define PRS_REG_PRS_INT_STS 0x40188
2044 /* [RW 8] Parity mask register #0 read/write */
2045 #define PRS_REG_PRS_PRTY_MASK 0x401a4
2046 /* [R 8] Parity register #0 read */
2047 #define PRS_REG_PRS_PRTY_STS 0x40198
2048 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load
2050 #define PRS_REG_PURE_REGIONS 0x40024
2051 /* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this
2052 serail number was released by SDM but cannot be used because a previous
2053 serial number was not released. */
2054 #define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154
2055 /* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this
2056 serail number was released by SDM but cannot be used because a previous
2057 serial number was not released. */
2058 #define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158
2059 /* [R 4] debug only: SRC current credit. Transaction based. */
2060 #define PRS_REG_SRC_CURRENT_CREDIT 0x4016c
2061 /* [R 8] debug only: TCM current credit. Cycle based. */
2062 #define PRS_REG_TCM_CURRENT_CREDIT 0x40160
2063 /* [R 8] debug only: TSDM current credit. Transaction based. */
2064 #define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
2065 /* [R 6] Debug only: Number of used entries in the data FIFO */
2066 #define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c
2067 /* [R 7] Debug only: Number of used entries in the header FIFO */
2068 #define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
2069 #define PXP2_REG_PGL_ADDR_88_F0 0x120534
2070 #define PXP2_REG_PGL_ADDR_8C_F0 0x120538
2071 #define PXP2_REG_PGL_ADDR_90_F0 0x12053c
2072 #define PXP2_REG_PGL_ADDR_94_F0 0x120540
2073 #define PXP2_REG_PGL_CONTROL0 0x120490
2074 #define PXP2_REG_PGL_CONTROL1 0x120514
2075 /* [RW 32] third dword data of expansion rom request. this register is
2076 special. reading from it provides a vector outstanding read requests. if
2077 a bit is zero it means that a read request on the corresponding tag did
2078 not finish yet (not all completions have arrived for it) */
2079 #define PXP2_REG_PGL_EXP_ROM2 0x120808
2080 /* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask;
2081 its[15:0]-address */
2082 #define PXP2_REG_PGL_INT_CSDM_0 0x1204f4
2083 #define PXP2_REG_PGL_INT_CSDM_1 0x1204f8
2084 #define PXP2_REG_PGL_INT_CSDM_2 0x1204fc
2085 #define PXP2_REG_PGL_INT_CSDM_3 0x120500
2086 #define PXP2_REG_PGL_INT_CSDM_4 0x120504
2087 #define PXP2_REG_PGL_INT_CSDM_5 0x120508
2088 #define PXP2_REG_PGL_INT_CSDM_6 0x12050c
2089 #define PXP2_REG_PGL_INT_CSDM_7 0x120510
2090 /* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask;
2091 its[15:0]-address */
2092 #define PXP2_REG_PGL_INT_TSDM_0 0x120494
2093 #define PXP2_REG_PGL_INT_TSDM_1 0x120498
2094 #define PXP2_REG_PGL_INT_TSDM_2 0x12049c
2095 #define PXP2_REG_PGL_INT_TSDM_3 0x1204a0
2096 #define PXP2_REG_PGL_INT_TSDM_4 0x1204a4
2097 #define PXP2_REG_PGL_INT_TSDM_5 0x1204a8
2098 #define PXP2_REG_PGL_INT_TSDM_6 0x1204ac
2099 #define PXP2_REG_PGL_INT_TSDM_7 0x1204b0
2100 /* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask;
2101 its[15:0]-address */
2102 #define PXP2_REG_PGL_INT_USDM_0 0x1204b4
2103 #define PXP2_REG_PGL_INT_USDM_1 0x1204b8
2104 #define PXP2_REG_PGL_INT_USDM_2 0x1204bc
2105 #define PXP2_REG_PGL_INT_USDM_3 0x1204c0
2106 #define PXP2_REG_PGL_INT_USDM_4 0x1204c4
2107 #define PXP2_REG_PGL_INT_USDM_5 0x1204c8
2108 #define PXP2_REG_PGL_INT_USDM_6 0x1204cc
2109 #define PXP2_REG_PGL_INT_USDM_7 0x1204d0
2110 /* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask;
2111 its[15:0]-address */
2112 #define PXP2_REG_PGL_INT_XSDM_0 0x1204d4
2113 #define PXP2_REG_PGL_INT_XSDM_1 0x1204d8
2114 #define PXP2_REG_PGL_INT_XSDM_2 0x1204dc
2115 #define PXP2_REG_PGL_INT_XSDM_3 0x1204e0
2116 #define PXP2_REG_PGL_INT_XSDM_4 0x1204e4
2117 #define PXP2_REG_PGL_INT_XSDM_5 0x1204e8
2118 #define PXP2_REG_PGL_INT_XSDM_6 0x1204ec
2119 #define PXP2_REG_PGL_INT_XSDM_7 0x1204f0
2120 /* [RW 3] this field allows one function to pretend being another function
2121 when accessing any BAR mapped resource within the device. the value of
2122 the field is the number of the function that will be accessed
2123 effectively. after software write to this bit it must read it in order to
2124 know that the new value is updated */
2125 #define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674
2126 #define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678
2127 #define PXP2_REG_PGL_PRETEND_FUNC_F2 0x12067c
2128 #define PXP2_REG_PGL_PRETEND_FUNC_F3 0x120680
2129 #define PXP2_REG_PGL_PRETEND_FUNC_F4 0x120684
2130 #define PXP2_REG_PGL_PRETEND_FUNC_F5 0x120688
2131 #define PXP2_REG_PGL_PRETEND_FUNC_F6 0x12068c
2132 #define PXP2_REG_PGL_PRETEND_FUNC_F7 0x120690
2133 /* [R 1] this bit indicates that a read request was blocked because of
2134 bus_master_en was deasserted */
2135 #define PXP2_REG_PGL_READ_BLOCKED 0x120568
2136 #define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8
2137 /* [R 18] debug only */
2138 #define PXP2_REG_PGL_TXW_CDTS 0x12052c
2139 /* [R 1] this bit indicates that a write request was blocked because of
2140 bus_master_en was deasserted */
2141 #define PXP2_REG_PGL_WRITE_BLOCKED 0x120564
2142 #define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0
2143 #define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
2144 #define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
2145 #define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
2146 #define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
2147 #define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4
2148 #define PXP2_REG_PSWRQ_BW_ADD28 0x120228
2149 #define PXP2_REG_PSWRQ_BW_ADD28 0x120228
2150 #define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8
2151 #define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4
2152 #define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8
2153 #define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc
2154 #define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0
2155 #define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c
2156 #define PXP2_REG_PSWRQ_BW_L1 0x1202b0
2157 #define PXP2_REG_PSWRQ_BW_L10 0x1202d4
2158 #define PXP2_REG_PSWRQ_BW_L11 0x1202d8
2159 #define PXP2_REG_PSWRQ_BW_L10 0x1202d4
2160 #define PXP2_REG_PSWRQ_BW_L11 0x1202d8
2161 #define PXP2_REG_PSWRQ_BW_L2 0x1202b4
2162 #define PXP2_REG_PSWRQ_BW_L28 0x120318
2163 #define PXP2_REG_PSWRQ_BW_L28 0x120318
2164 #define PXP2_REG_PSWRQ_BW_L3 0x1202b8
2165 #define PXP2_REG_PSWRQ_BW_L6 0x1202c4
2166 #define PXP2_REG_PSWRQ_BW_L7 0x1202c8
2167 #define PXP2_REG_PSWRQ_BW_L8 0x1202cc
2168 #define PXP2_REG_PSWRQ_BW_L9 0x1202d0
2169 #define PXP2_REG_PSWRQ_BW_RD 0x120324
2170 #define PXP2_REG_PSWRQ_BW_UB1 0x120238
2171 #define PXP2_REG_PSWRQ_BW_UB10 0x12025c
2172 #define PXP2_REG_PSWRQ_BW_UB11 0x120260
2173 #define PXP2_REG_PSWRQ_BW_UB10 0x12025c
2174 #define PXP2_REG_PSWRQ_BW_UB11 0x120260
2175 #define PXP2_REG_PSWRQ_BW_UB2 0x12023c
2176 #define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
2177 #define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
2178 #define PXP2_REG_PSWRQ_BW_UB3 0x120240
2179 #define PXP2_REG_PSWRQ_BW_UB6 0x12024c
2180 #define PXP2_REG_PSWRQ_BW_UB7 0x120250
2181 #define PXP2_REG_PSWRQ_BW_UB8 0x120254
2182 #define PXP2_REG_PSWRQ_BW_UB9 0x120258
2183 #define PXP2_REG_PSWRQ_BW_WR 0x120328
2184 #define PXP2_REG_PSWRQ_CDU0_L2P 0x120000
2185 #define PXP2_REG_PSWRQ_QM0_L2P 0x120038
2186 #define PXP2_REG_PSWRQ_SRC0_L2P 0x120054
2187 #define PXP2_REG_PSWRQ_TM0_L2P 0x12001c
2188 #define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0
2189 /* [RW 32] Interrupt mask register #0 read/write */
2190 #define PXP2_REG_PXP2_INT_MASK_0 0x120578
2191 /* [R 32] Interrupt register #0 read */
2192 #define PXP2_REG_PXP2_INT_STS_0 0x12056c
2193 #define PXP2_REG_PXP2_INT_STS_1 0x120608
2194 /* [RC 32] Interrupt register #0 read clear */
2195 #define PXP2_REG_PXP2_INT_STS_CLR_0 0x120570
2196 /* [RW 32] Parity mask register #0 read/write */
2197 #define PXP2_REG_PXP2_PRTY_MASK_0 0x120588
2198 #define PXP2_REG_PXP2_PRTY_MASK_1 0x120598
2199 /* [R 32] Parity register #0 read */
2200 #define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
2201 #define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
2202 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives
2203 indication about backpressure) */
2204 #define PXP2_REG_RD_ALMOST_FULL_0 0x120424
2205 /* [R 8] Debug only: The blocks counter - number of unused block ids */
2206 #define PXP2_REG_RD_BLK_CNT 0x120418
2207 /* [RW 8] Debug only: Total number of available blocks in Tetris Buffer.
2208 Must be bigger than 6. Normally should not be changed. */
2209 #define PXP2_REG_RD_BLK_NUM_CFG 0x12040c
2210 /* [RW 2] CDU byte swapping mode configuration for master read requests */
2211 #define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404
2212 /* [RW 1] When '1'; inputs to the PSWRD block are ignored */
2213 #define PXP2_REG_RD_DISABLE_INPUTS 0x120374
2214 /* [R 1] PSWRD internal memories initialization is done */
2215 #define PXP2_REG_RD_INIT_DONE 0x120370
2216 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2217 allocated for vq10 */
2218 #define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0
2219 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2220 allocated for vq11 */
2221 #define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4
2222 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2223 allocated for vq17 */
2224 #define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc
2225 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2226 allocated for vq18 */
2227 #define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0
2228 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2229 allocated for vq19 */
2230 #define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4
2231 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2232 allocated for vq22 */
2233 #define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0
2234 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2235 allocated for vq6 */
2236 #define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390
2237 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2238 allocated for vq9 */
2239 #define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c
2240 /* [RW 2] PBF byte swapping mode configuration for master read requests */
2241 #define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4
2242 /* [R 1] Debug only: Indication if delivery ports are idle */
2243 #define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c
2244 #define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420
2245 /* [RW 2] QM byte swapping mode configuration for master read requests */
2246 #define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8
2247 /* [R 7] Debug only: The SR counter - number of unused sub request ids */
2248 #define PXP2_REG_RD_SR_CNT 0x120414
2249 /* [RW 2] SRC byte swapping mode configuration for master read requests */
2250 #define PXP2_REG_RD_SRC_SWAP_MODE 0x120400
2251 /* [RW 7] Debug only: Total number of available PCI read sub-requests. Must
2252 be bigger than 1. Normally should not be changed. */
2253 #define PXP2_REG_RD_SR_NUM_CFG 0x120408
2254 /* [RW 1] Signals the PSWRD block to start initializing internal memories */
2255 #define PXP2_REG_RD_START_INIT 0x12036c
2256 /* [RW 2] TM byte swapping mode configuration for master read requests */
2257 #define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc
2258 /* [RW 10] Bandwidth addition to VQ0 write requests */
2259 #define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc
2260 /* [RW 10] Bandwidth addition to VQ12 read requests */
2261 #define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec
2262 /* [RW 10] Bandwidth addition to VQ13 read requests */
2263 #define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0
2264 /* [RW 10] Bandwidth addition to VQ14 read requests */
2265 #define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4
2266 /* [RW 10] Bandwidth addition to VQ15 read requests */
2267 #define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8
2268 /* [RW 10] Bandwidth addition to VQ16 read requests */
2269 #define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc
2270 /* [RW 10] Bandwidth addition to VQ17 read requests */
2271 #define PXP2_REG_RQ_BW_RD_ADD17 0x120200
2272 /* [RW 10] Bandwidth addition to VQ18 read requests */
2273 #define PXP2_REG_RQ_BW_RD_ADD18 0x120204
2274 /* [RW 10] Bandwidth addition to VQ19 read requests */
2275 #define PXP2_REG_RQ_BW_RD_ADD19 0x120208
2276 /* [RW 10] Bandwidth addition to VQ20 read requests */
2277 #define PXP2_REG_RQ_BW_RD_ADD20 0x12020c
2278 /* [RW 10] Bandwidth addition to VQ22 read requests */
2279 #define PXP2_REG_RQ_BW_RD_ADD22 0x120210
2280 /* [RW 10] Bandwidth addition to VQ23 read requests */
2281 #define PXP2_REG_RQ_BW_RD_ADD23 0x120214
2282 /* [RW 10] Bandwidth addition to VQ24 read requests */
2283 #define PXP2_REG_RQ_BW_RD_ADD24 0x120218
2284 /* [RW 10] Bandwidth addition to VQ25 read requests */
2285 #define PXP2_REG_RQ_BW_RD_ADD25 0x12021c
2286 /* [RW 10] Bandwidth addition to VQ26 read requests */
2287 #define PXP2_REG_RQ_BW_RD_ADD26 0x120220
2288 /* [RW 10] Bandwidth addition to VQ27 read requests */
2289 #define PXP2_REG_RQ_BW_RD_ADD27 0x120224
2290 /* [RW 10] Bandwidth addition to VQ4 read requests */
2291 #define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc
2292 /* [RW 10] Bandwidth addition to VQ5 read requests */
2293 #define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0
2294 /* [RW 10] Bandwidth Typical L for VQ0 Read requests */
2295 #define PXP2_REG_RQ_BW_RD_L0 0x1202ac
2296 /* [RW 10] Bandwidth Typical L for VQ12 Read requests */
2297 #define PXP2_REG_RQ_BW_RD_L12 0x1202dc
2298 /* [RW 10] Bandwidth Typical L for VQ13 Read requests */
2299 #define PXP2_REG_RQ_BW_RD_L13 0x1202e0
2300 /* [RW 10] Bandwidth Typical L for VQ14 Read requests */
2301 #define PXP2_REG_RQ_BW_RD_L14 0x1202e4
2302 /* [RW 10] Bandwidth Typical L for VQ15 Read requests */
2303 #define PXP2_REG_RQ_BW_RD_L15 0x1202e8
2304 /* [RW 10] Bandwidth Typical L for VQ16 Read requests */
2305 #define PXP2_REG_RQ_BW_RD_L16 0x1202ec
2306 /* [RW 10] Bandwidth Typical L for VQ17 Read requests */
2307 #define PXP2_REG_RQ_BW_RD_L17 0x1202f0
2308 /* [RW 10] Bandwidth Typical L for VQ18 Read requests */
2309 #define PXP2_REG_RQ_BW_RD_L18 0x1202f4
2310 /* [RW 10] Bandwidth Typical L for VQ19 Read requests */
2311 #define PXP2_REG_RQ_BW_RD_L19 0x1202f8
2312 /* [RW 10] Bandwidth Typical L for VQ20 Read requests */
2313 #define PXP2_REG_RQ_BW_RD_L20 0x1202fc
2314 /* [RW 10] Bandwidth Typical L for VQ22 Read requests */
2315 #define PXP2_REG_RQ_BW_RD_L22 0x120300
2316 /* [RW 10] Bandwidth Typical L for VQ23 Read requests */
2317 #define PXP2_REG_RQ_BW_RD_L23 0x120304
2318 /* [RW 10] Bandwidth Typical L for VQ24 Read requests */
2319 #define PXP2_REG_RQ_BW_RD_L24 0x120308
2320 /* [RW 10] Bandwidth Typical L for VQ25 Read requests */
2321 #define PXP2_REG_RQ_BW_RD_L25 0x12030c
2322 /* [RW 10] Bandwidth Typical L for VQ26 Read requests */
2323 #define PXP2_REG_RQ_BW_RD_L26 0x120310
2324 /* [RW 10] Bandwidth Typical L for VQ27 Read requests */
2325 #define PXP2_REG_RQ_BW_RD_L27 0x120314
2326 /* [RW 10] Bandwidth Typical L for VQ4 Read requests */
2327 #define PXP2_REG_RQ_BW_RD_L4 0x1202bc
2328 /* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */
2329 #define PXP2_REG_RQ_BW_RD_L5 0x1202c0
2330 /* [RW 7] Bandwidth upper bound for VQ0 read requests */
2331 #define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234
2332 /* [RW 7] Bandwidth upper bound for VQ12 read requests */
2333 #define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264
2334 /* [RW 7] Bandwidth upper bound for VQ13 read requests */
2335 #define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268
2336 /* [RW 7] Bandwidth upper bound for VQ14 read requests */
2337 #define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c
2338 /* [RW 7] Bandwidth upper bound for VQ15 read requests */
2339 #define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270
2340 /* [RW 7] Bandwidth upper bound for VQ16 read requests */
2341 #define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274
2342 /* [RW 7] Bandwidth upper bound for VQ17 read requests */
2343 #define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278
2344 /* [RW 7] Bandwidth upper bound for VQ18 read requests */
2345 #define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c
2346 /* [RW 7] Bandwidth upper bound for VQ19 read requests */
2347 #define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280
2348 /* [RW 7] Bandwidth upper bound for VQ20 read requests */
2349 #define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284
2350 /* [RW 7] Bandwidth upper bound for VQ22 read requests */
2351 #define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288
2352 /* [RW 7] Bandwidth upper bound for VQ23 read requests */
2353 #define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c
2354 /* [RW 7] Bandwidth upper bound for VQ24 read requests */
2355 #define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290
2356 /* [RW 7] Bandwidth upper bound for VQ25 read requests */
2357 #define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294
2358 /* [RW 7] Bandwidth upper bound for VQ26 read requests */
2359 #define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298
2360 /* [RW 7] Bandwidth upper bound for VQ27 read requests */
2361 #define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c
2362 /* [RW 7] Bandwidth upper bound for VQ4 read requests */
2363 #define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244
2364 /* [RW 7] Bandwidth upper bound for VQ5 read requests */
2365 #define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248
2366 /* [RW 10] Bandwidth addition to VQ29 write requests */
2367 #define PXP2_REG_RQ_BW_WR_ADD29 0x12022c
2368 /* [RW 10] Bandwidth addition to VQ30 write requests */
2369 #define PXP2_REG_RQ_BW_WR_ADD30 0x120230
2370 /* [RW 10] Bandwidth Typical L for VQ29 Write requests */
2371 #define PXP2_REG_RQ_BW_WR_L29 0x12031c
2372 /* [RW 10] Bandwidth Typical L for VQ30 Write requests */
2373 #define PXP2_REG_RQ_BW_WR_L30 0x120320
2374 /* [RW 7] Bandwidth upper bound for VQ29 */
2375 #define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4
2376 /* [RW 7] Bandwidth upper bound for VQ30 */
2377 #define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8
2378 /* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */
2379 #define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008
2380 /* [RW 2] Endian mode for cdu */
2381 #define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0
2382 #define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c
2383 #define PXP2_REG_RQ_CDU_LAST_ILT 0x120620
2384 /* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k;
2386 #define PXP2_REG_RQ_CDU_P_SIZE 0x120018
2387 /* [R 1] 1' indicates that the requester has finished its internal
2389 #define PXP2_REG_RQ_CFG_DONE 0x1201b4
2390 /* [RW 2] Endian mode for debug */
2391 #define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4
2392 /* [RW 1] When '1'; requests will enter input buffers but wont get out
2394 #define PXP2_REG_RQ_DISABLE_INPUTS 0x120330
2395 /* [RW 1] 1 - SR will be aligned by 64B; 0 - SR will be aligned by 8B */
2396 #define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0
2397 /* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will
2399 #define PXP2_REG_RQ_ELT_DISABLE 0x12066c
2400 /* [RW 2] Endian mode for hc */
2401 #define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
2402 /* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back
2403 compatibility needs; Note that different registers are used per mode */
2404 #define PXP2_REG_RQ_ILT_MODE 0x1205b4
2405 /* [WB 53] Onchip address table */
2406 #define PXP2_REG_RQ_ONCHIP_AT 0x122000
2407 /* [WB 53] Onchip address table - B0 */
2408 #define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000
2409 /* [RW 13] Pending read limiter threshold; in Dwords */
2410 #define PXP2_REG_RQ_PDR_LIMIT 0x12033c
2411 /* [RW 2] Endian mode for qm */
2412 #define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
2413 #define PXP2_REG_RQ_QM_FIRST_ILT 0x120634
2414 #define PXP2_REG_RQ_QM_LAST_ILT 0x120638
2415 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
2417 #define PXP2_REG_RQ_QM_P_SIZE 0x120050
2418 /* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
2419 #define PXP2_REG_RQ_RBC_DONE 0x1201b0
2420 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
2421 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
2422 #define PXP2_REG_RQ_RD_MBS0 0x120160
2423 /* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
2424 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
2425 #define PXP2_REG_RQ_RD_MBS1 0x120168
2426 /* [RW 2] Endian mode for src */
2427 #define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
2428 #define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c
2429 #define PXP2_REG_RQ_SRC_LAST_ILT 0x120640
2430 /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
2432 #define PXP2_REG_RQ_SRC_P_SIZE 0x12006c
2433 /* [RW 2] Endian mode for tm */
2434 #define PXP2_REG_RQ_TM_ENDIAN_M 0x120198
2435 #define PXP2_REG_RQ_TM_FIRST_ILT 0x120644
2436 #define PXP2_REG_RQ_TM_LAST_ILT 0x120648
2437 /* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k;
2439 #define PXP2_REG_RQ_TM_P_SIZE 0x120034
2440 /* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
2441 #define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c
2442 /* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */
2443 #define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094
2444 /* [R 8] Number of entries occupied by vq 0 in pswrq memory */
2445 #define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810
2446 /* [R 8] Number of entries occupied by vq 10 in pswrq memory */
2447 #define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818
2448 /* [R 8] Number of entries occupied by vq 11 in pswrq memory */
2449 #define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820
2450 /* [R 8] Number of entries occupied by vq 12 in pswrq memory */
2451 #define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828
2452 /* [R 8] Number of entries occupied by vq 13 in pswrq memory */
2453 #define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830
2454 /* [R 8] Number of entries occupied by vq 14 in pswrq memory */
2455 #define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838
2456 /* [R 8] Number of entries occupied by vq 15 in pswrq memory */
2457 #define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840
2458 /* [R 8] Number of entries occupied by vq 16 in pswrq memory */
2459 #define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848
2460 /* [R 8] Number of entries occupied by vq 17 in pswrq memory */
2461 #define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850
2462 /* [R 8] Number of entries occupied by vq 18 in pswrq memory */
2463 #define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858
2464 /* [R 8] Number of entries occupied by vq 19 in pswrq memory */
2465 #define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860
2466 /* [R 8] Number of entries occupied by vq 1 in pswrq memory */
2467 #define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868
2468 /* [R 8] Number of entries occupied by vq 20 in pswrq memory */
2469 #define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870
2470 /* [R 8] Number of entries occupied by vq 21 in pswrq memory */
2471 #define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878
2472 /* [R 8] Number of entries occupied by vq 22 in pswrq memory */
2473 #define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880
2474 /* [R 8] Number of entries occupied by vq 23 in pswrq memory */
2475 #define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888
2476 /* [R 8] Number of entries occupied by vq 24 in pswrq memory */
2477 #define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890
2478 /* [R 8] Number of entries occupied by vq 25 in pswrq memory */
2479 #define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898
2480 /* [R 8] Number of entries occupied by vq 26 in pswrq memory */
2481 #define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0
2482 /* [R 8] Number of entries occupied by vq 27 in pswrq memory */
2483 #define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8
2484 /* [R 8] Number of entries occupied by vq 28 in pswrq memory */
2485 #define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0
2486 /* [R 8] Number of entries occupied by vq 29 in pswrq memory */
2487 #define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8
2488 /* [R 8] Number of entries occupied by vq 2 in pswrq memory */
2489 #define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0
2490 /* [R 8] Number of entries occupied by vq 30 in pswrq memory */
2491 #define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8
2492 /* [R 8] Number of entries occupied by vq 31 in pswrq memory */
2493 #define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0
2494 /* [R 8] Number of entries occupied by vq 3 in pswrq memory */
2495 #define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8
2496 /* [R 8] Number of entries occupied by vq 4 in pswrq memory */
2497 #define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0
2498 /* [R 8] Number of entries occupied by vq 5 in pswrq memory */
2499 #define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8
2500 /* [R 8] Number of entries occupied by vq 6 in pswrq memory */
2501 #define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0
2502 /* [R 8] Number of entries occupied by vq 7 in pswrq memory */
2503 #define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8
2504 /* [R 8] Number of entries occupied by vq 8 in pswrq memory */
2505 #define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900
2506 /* [R 8] Number of entries occupied by vq 9 in pswrq memory */
2507 #define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908
2508 /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
2509 001:256B; 010: 512B; */
2510 #define PXP2_REG_RQ_WR_MBS0 0x12015c
2511 /* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
2512 001:256B; 010: 512B; */
2513 #define PXP2_REG_RQ_WR_MBS1 0x120164
2514 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2515 buffer reaches this number has_payload will be asserted */
2516 #define PXP2_REG_WR_CDU_MPS 0x1205f0
2517 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2518 buffer reaches this number has_payload will be asserted */
2519 #define PXP2_REG_WR_CSDM_MPS 0x1205d0
2520 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2521 buffer reaches this number has_payload will be asserted */
2522 #define PXP2_REG_WR_DBG_MPS 0x1205e8
2523 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2524 buffer reaches this number has_payload will be asserted */
2525 #define PXP2_REG_WR_DMAE_MPS 0x1205ec
2526 /* [RW 10] if Number of entries in dmae fifo will be higher than this
2527 threshold then has_payload indication will be asserted; the default value
2528 should be equal to > write MBS size! */
2529 #define PXP2_REG_WR_DMAE_TH 0x120368
2530 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2531 buffer reaches this number has_payload will be asserted */
2532 #define PXP2_REG_WR_HC_MPS 0x1205c8
2533 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2534 buffer reaches this number has_payload will be asserted */
2535 #define PXP2_REG_WR_QM_MPS 0x1205dc
2536 /* [RW 1] 0 - working in A0 mode; - working in B0 mode */
2537 #define PXP2_REG_WR_REV_MODE 0x120670
2538 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2539 buffer reaches this number has_payload will be asserted */
2540 #define PXP2_REG_WR_SRC_MPS 0x1205e4
2541 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2542 buffer reaches this number has_payload will be asserted */
2543 #define PXP2_REG_WR_TM_MPS 0x1205e0
2544 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2545 buffer reaches this number has_payload will be asserted */
2546 #define PXP2_REG_WR_TSDM_MPS 0x1205d4
2547 /* [RW 10] if Number of entries in usdmdp fifo will be higher than this
2548 threshold then has_payload indication will be asserted; the default value
2549 should be equal to > write MBS size! */
2550 #define PXP2_REG_WR_USDMDP_TH 0x120348
2551 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2552 buffer reaches this number has_payload will be asserted */
2553 #define PXP2_REG_WR_USDM_MPS 0x1205cc
2554 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2555 buffer reaches this number has_payload will be asserted */
2556 #define PXP2_REG_WR_XSDM_MPS 0x1205d8
2557 /* [R 1] debug only: Indication if PSWHST arbiter is idle */
2558 #define PXP_REG_HST_ARB_IS_IDLE 0x103004
2559 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
2560 this client is waiting for the arbiter. */
2561 #define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008
2562 /* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
2563 should update accoring to 'hst_discard_doorbells' register when the state
2565 #define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0
2566 /* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
2567 means this PSWHST is discarding inputs from this client. Each bit should
2568 update accoring to 'hst_discard_internal_writes' register when the state
2570 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c
2571 /* [WB 160] Used for initialization of the inbound interrupts memory */
2572 #define PXP_REG_HST_INBOUND_INT 0x103800
2573 /* [RW 32] Interrupt mask register #0 read/write */
2574 #define PXP_REG_PXP_INT_MASK_0 0x103074
2575 #define PXP_REG_PXP_INT_MASK_1 0x103084
2576 /* [R 32] Interrupt register #0 read */
2577 #define PXP_REG_PXP_INT_STS_0 0x103068
2578 #define PXP_REG_PXP_INT_STS_1 0x103078
2579 /* [RC 32] Interrupt register #0 read clear */
2580 #define PXP_REG_PXP_INT_STS_CLR_0 0x10306c
2581 /* [RW 26] Parity mask register #0 read/write */
2582 #define PXP_REG_PXP_PRTY_MASK 0x103094
2583 /* [R 26] Parity register #0 read */
2584 #define PXP_REG_PXP_PRTY_STS 0x103088
2585 /* [RW 4] The activity counter initial increment value sent in the load
2587 #define QM_REG_ACTCTRINITVAL_0 0x168040
2588 #define QM_REG_ACTCTRINITVAL_1 0x168044
2589 #define QM_REG_ACTCTRINITVAL_2 0x168048
2590 #define QM_REG_ACTCTRINITVAL_3 0x16804c
2591 /* [RW 32] The base logical address (in bytes) of each physical queue. The
2592 index I represents the physical queue number. The 12 lsbs are ignore and
2593 considered zero so practically there are only 20 bits in this register;
2595 #define QM_REG_BASEADDR 0x168900
2596 /* [RW 32] The base logical address (in bytes) of each physical queue. The
2597 index I represents the physical queue number. The 12 lsbs are ignore and
2598 considered zero so practically there are only 20 bits in this register;
2600 #define QM_REG_BASEADDR_EXT_A 0x16e100
2601 /* [RW 16] The byte credit cost for each task. This value is for both ports */
2602 #define QM_REG_BYTECRDCOST 0x168234
2603 /* [RW 16] The initial byte credit value for both ports. */
2604 #define QM_REG_BYTECRDINITVAL 0x168238
2605 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2606 queue uses port 0 else it uses port 1; queues 31-0 */
2607 #define QM_REG_BYTECRDPORT_LSB 0x168228
2608 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2609 queue uses port 0 else it uses port 1; queues 95-64 */
2610 #define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520
2611 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2612 queue uses port 0 else it uses port 1; queues 63-32 */
2613 #define QM_REG_BYTECRDPORT_MSB 0x168224
2614 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2615 queue uses port 0 else it uses port 1; queues 127-96 */
2616 #define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c
2617 /* [RW 16] The byte credit value that if above the QM is considered almost
2619 #define QM_REG_BYTECREDITAFULLTHR 0x168094
2620 /* [RW 4] The initial credit for interface */
2621 #define QM_REG_CMINITCRD_0 0x1680cc
2622 #define QM_REG_CMINITCRD_1 0x1680d0
2623 #define QM_REG_CMINITCRD_2 0x1680d4
2624 #define QM_REG_CMINITCRD_3 0x1680d8
2625 #define QM_REG_CMINITCRD_4 0x1680dc
2626 #define QM_REG_CMINITCRD_5 0x1680e0
2627 #define QM_REG_CMINITCRD_6 0x1680e4
2628 #define QM_REG_CMINITCRD_7 0x1680e8
2629 /* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface
2631 #define QM_REG_CMINTEN 0x1680ec
2632 /* [RW 12] A bit vector which indicates which one of the queues are tied to
2634 #define QM_REG_CMINTVOQMASK_0 0x1681f4
2635 #define QM_REG_CMINTVOQMASK_1 0x1681f8
2636 #define QM_REG_CMINTVOQMASK_2 0x1681fc
2637 #define QM_REG_CMINTVOQMASK_3 0x168200
2638 #define QM_REG_CMINTVOQMASK_4 0x168204
2639 #define QM_REG_CMINTVOQMASK_5 0x168208
2640 #define QM_REG_CMINTVOQMASK_6 0x16820c
2641 #define QM_REG_CMINTVOQMASK_7 0x168210
2642 /* [RW 20] The number of connections divided by 16 which dictates the size
2643 of each queue which belongs to even function number. */
2644 #define QM_REG_CONNNUM_0 0x168020
2645 /* [R 6] Keep the fill level of the fifo from write client 4 */
2646 #define QM_REG_CQM_WRC_FIFOLVL 0x168018
2647 /* [RW 8] The context regions sent in the CFC load request */
2648 #define QM_REG_CTXREG_0 0x168030
2649 #define QM_REG_CTXREG_1 0x168034
2650 #define QM_REG_CTXREG_2 0x168038
2651 #define QM_REG_CTXREG_3 0x16803c
2652 /* [RW 12] The VOQ mask used to select the VOQs which needs to be full for
2654 #define QM_REG_ENBYPVOQMASK 0x16823c
2655 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2656 physical queue uses the byte credit; queues 31-0 */
2657 #define QM_REG_ENBYTECRD_LSB 0x168220
2658 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2659 physical queue uses the byte credit; queues 95-64 */
2660 #define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518
2661 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2662 physical queue uses the byte credit; queues 63-32 */
2663 #define QM_REG_ENBYTECRD_MSB 0x16821c
2664 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2665 physical queue uses the byte credit; queues 127-96 */
2666 #define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514
2667 /* [RW 4] If cleared then the secondary interface will not be served by the
2669 #define QM_REG_ENSEC 0x1680f0
2671 #define QM_REG_FUNCNUMSEL_LSB 0x168230
2673 #define QM_REG_FUNCNUMSEL_MSB 0x16822c
2674 /* [RW 32] A mask register to mask the Almost empty signals which will not
2675 be use for the almost empty indication to the HW block; queues 31:0 */
2676 #define QM_REG_HWAEMPTYMASK_LSB 0x168218
2677 /* [RW 32] A mask register to mask the Almost empty signals which will not
2678 be use for the almost empty indication to the HW block; queues 95-64 */
2679 #define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510
2680 /* [RW 32] A mask register to mask the Almost empty signals which will not
2681 be use for the almost empty indication to the HW block; queues 63:32 */
2682 #define QM_REG_HWAEMPTYMASK_MSB 0x168214
2683 /* [RW 32] A mask register to mask the Almost empty signals which will not
2684 be use for the almost empty indication to the HW block; queues 127-96 */
2685 #define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c
2686 /* [RW 4] The number of outstanding request to CFC */
2687 #define QM_REG_OUTLDREQ 0x168804
2688 /* [RC 1] A flag to indicate that overflow error occurred in one of the
2690 #define QM_REG_OVFERROR 0x16805c
2691 /* [RC 7] the Q were the qverflow occurs */
2692 #define QM_REG_OVFQNUM 0x168058
2693 /* [R 16] Pause state for physical queues 15-0 */
2694 #define QM_REG_PAUSESTATE0 0x168410
2695 /* [R 16] Pause state for physical queues 31-16 */
2696 #define QM_REG_PAUSESTATE1 0x168414
2697 /* [R 16] Pause state for physical queues 47-32 */
2698 #define QM_REG_PAUSESTATE2 0x16e684
2699 /* [R 16] Pause state for physical queues 63-48 */
2700 #define QM_REG_PAUSESTATE3 0x16e688
2701 /* [R 16] Pause state for physical queues 79-64 */
2702 #define QM_REG_PAUSESTATE4 0x16e68c
2703 /* [R 16] Pause state for physical queues 95-80 */
2704 #define QM_REG_PAUSESTATE5 0x16e690
2705 /* [R 16] Pause state for physical queues 111-96 */
2706 #define QM_REG_PAUSESTATE6 0x16e694
2707 /* [R 16] Pause state for physical queues 127-112 */
2708 #define QM_REG_PAUSESTATE7 0x16e698
2709 /* [RW 2] The PCI attributes field used in the PCI request. */
2710 #define QM_REG_PCIREQAT 0x168054
2711 /* [R 16] The byte credit of port 0 */
2712 #define QM_REG_PORT0BYTECRD 0x168300
2713 /* [R 16] The byte credit of port 1 */
2714 #define QM_REG_PORT1BYTECRD 0x168304
2715 /* [RW 3] pci function number of queues 15-0 */
2716 #define QM_REG_PQ2PCIFUNC_0 0x16e6bc
2717 #define QM_REG_PQ2PCIFUNC_1 0x16e6c0
2718 #define QM_REG_PQ2PCIFUNC_2 0x16e6c4
2719 #define QM_REG_PQ2PCIFUNC_3 0x16e6c8
2720 #define QM_REG_PQ2PCIFUNC_4 0x16e6cc
2721 #define QM_REG_PQ2PCIFUNC_5 0x16e6d0
2722 #define QM_REG_PQ2PCIFUNC_6 0x16e6d4
2723 #define QM_REG_PQ2PCIFUNC_7 0x16e6d8
2724 /* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow:
2725 ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
2726 bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
2727 #define QM_REG_PTRTBL 0x168a00
2728 /* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow:
2729 ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
2730 bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
2731 #define QM_REG_PTRTBL_EXT_A 0x16e200
2732 /* [RW 2] Interrupt mask register #0 read/write */
2733 #define QM_REG_QM_INT_MASK 0x168444
2734 /* [R 2] Interrupt register #0 read */
2735 #define QM_REG_QM_INT_STS 0x168438
2736 /* [RW 12] Parity mask register #0 read/write */
2737 #define QM_REG_QM_PRTY_MASK 0x168454
2738 /* [R 12] Parity register #0 read */
2739 #define QM_REG_QM_PRTY_STS 0x168448
2740 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */
2741 #define QM_REG_QSTATUS_HIGH 0x16802c
2742 /* [R 32] Current queues in pipeline: Queues from 96 to 127 */
2743 #define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408
2744 /* [R 32] Current queues in pipeline: Queues from 0 to 31 */
2745 #define QM_REG_QSTATUS_LOW 0x168028
2746 /* [R 32] Current queues in pipeline: Queues from 64 to 95 */
2747 #define QM_REG_QSTATUS_LOW_EXT_A 0x16e404
2748 /* [R 24] The number of tasks queued for each queue; queues 63-0 */
2749 #define QM_REG_QTASKCTR_0 0x168308
2750 /* [R 24] The number of tasks queued for each queue; queues 127-64 */
2751 #define QM_REG_QTASKCTR_EXT_A_0 0x16e584
2752 /* [RW 4] Queue tied to VOQ */
2753 #define QM_REG_QVOQIDX_0 0x1680f4
2754 #define QM_REG_QVOQIDX_10 0x16811c
2755 #define QM_REG_QVOQIDX_100 0x16e49c
2756 #define QM_REG_QVOQIDX_101 0x16e4a0
2757 #define QM_REG_QVOQIDX_102 0x16e4a4
2758 #define QM_REG_QVOQIDX_103 0x16e4a8
2759 #define QM_REG_QVOQIDX_104 0x16e4ac
2760 #define QM_REG_QVOQIDX_105 0x16e4b0
2761 #define QM_REG_QVOQIDX_106 0x16e4b4
2762 #define QM_REG_QVOQIDX_107 0x16e4b8
2763 #define QM_REG_QVOQIDX_108 0x16e4bc
2764 #define QM_REG_QVOQIDX_109 0x16e4c0
2765 #define QM_REG_QVOQIDX_100 0x16e49c
2766 #define QM_REG_QVOQIDX_101 0x16e4a0
2767 #define QM_REG_QVOQIDX_102 0x16e4a4
2768 #define QM_REG_QVOQIDX_103 0x16e4a8
2769 #define QM_REG_QVOQIDX_104 0x16e4ac
2770 #define QM_REG_QVOQIDX_105 0x16e4b0
2771 #define QM_REG_QVOQIDX_106 0x16e4b4
2772 #define QM_REG_QVOQIDX_107 0x16e4b8
2773 #define QM_REG_QVOQIDX_108 0x16e4bc
2774 #define QM_REG_QVOQIDX_109 0x16e4c0
2775 #define QM_REG_QVOQIDX_11 0x168120
2776 #define QM_REG_QVOQIDX_110 0x16e4c4
2777 #define QM_REG_QVOQIDX_111 0x16e4c8
2778 #define QM_REG_QVOQIDX_112 0x16e4cc
2779 #define QM_REG_QVOQIDX_113 0x16e4d0
2780 #define QM_REG_QVOQIDX_114 0x16e4d4
2781 #define QM_REG_QVOQIDX_115 0x16e4d8
2782 #define QM_REG_QVOQIDX_116 0x16e4dc
2783 #define QM_REG_QVOQIDX_117 0x16e4e0
2784 #define QM_REG_QVOQIDX_118 0x16e4e4
2785 #define QM_REG_QVOQIDX_119 0x16e4e8
2786 #define QM_REG_QVOQIDX_110 0x16e4c4
2787 #define QM_REG_QVOQIDX_111 0x16e4c8
2788 #define QM_REG_QVOQIDX_112 0x16e4cc
2789 #define QM_REG_QVOQIDX_113 0x16e4d0
2790 #define QM_REG_QVOQIDX_114 0x16e4d4
2791 #define QM_REG_QVOQIDX_115 0x16e4d8
2792 #define QM_REG_QVOQIDX_116 0x16e4dc
2793 #define QM_REG_QVOQIDX_117 0x16e4e0
2794 #define QM_REG_QVOQIDX_118 0x16e4e4
2795 #define QM_REG_QVOQIDX_119 0x16e4e8
2796 #define QM_REG_QVOQIDX_12 0x168124
2797 #define QM_REG_QVOQIDX_120 0x16e4ec
2798 #define QM_REG_QVOQIDX_121 0x16e4f0
2799 #define QM_REG_QVOQIDX_122 0x16e4f4
2800 #define QM_REG_QVOQIDX_123 0x16e4f8
2801 #define QM_REG_QVOQIDX_124 0x16e4fc
2802 #define QM_REG_QVOQIDX_125 0x16e500
2803 #define QM_REG_QVOQIDX_126 0x16e504
2804 #define QM_REG_QVOQIDX_127 0x16e508
2805 #define QM_REG_QVOQIDX_120 0x16e4ec
2806 #define QM_REG_QVOQIDX_121 0x16e4f0
2807 #define QM_REG_QVOQIDX_122 0x16e4f4
2808 #define QM_REG_QVOQIDX_123 0x16e4f8
2809 #define QM_REG_QVOQIDX_124 0x16e4fc
2810 #define QM_REG_QVOQIDX_125 0x16e500
2811 #define QM_REG_QVOQIDX_126 0x16e504
2812 #define QM_REG_QVOQIDX_127 0x16e508
2813 #define QM_REG_QVOQIDX_13 0x168128
2814 #define QM_REG_QVOQIDX_14 0x16812c
2815 #define QM_REG_QVOQIDX_15 0x168130
2816 #define QM_REG_QVOQIDX_16 0x168134
2817 #define QM_REG_QVOQIDX_17 0x168138
2818 #define QM_REG_QVOQIDX_21 0x168148
2819 #define QM_REG_QVOQIDX_22 0x16814c
2820 #define QM_REG_QVOQIDX_23 0x168150
2821 #define QM_REG_QVOQIDX_24 0x168154
2822 #define QM_REG_QVOQIDX_25 0x168158
2823 #define QM_REG_QVOQIDX_26 0x16815c
2824 #define QM_REG_QVOQIDX_27 0x168160
2825 #define QM_REG_QVOQIDX_28 0x168164
2826 #define QM_REG_QVOQIDX_29 0x168168
2827 #define QM_REG_QVOQIDX_30 0x16816c
2828 #define QM_REG_QVOQIDX_31 0x168170
2829 #define QM_REG_QVOQIDX_32 0x168174
2830 #define QM_REG_QVOQIDX_33 0x168178
2831 #define QM_REG_QVOQIDX_34 0x16817c
2832 #define QM_REG_QVOQIDX_35 0x168180
2833 #define QM_REG_QVOQIDX_36 0x168184
2834 #define QM_REG_QVOQIDX_37 0x168188
2835 #define QM_REG_QVOQIDX_38 0x16818c
2836 #define QM_REG_QVOQIDX_39 0x168190
2837 #define QM_REG_QVOQIDX_40 0x168194
2838 #define QM_REG_QVOQIDX_41 0x168198
2839 #define QM_REG_QVOQIDX_42 0x16819c
2840 #define QM_REG_QVOQIDX_43 0x1681a0
2841 #define QM_REG_QVOQIDX_44 0x1681a4
2842 #define QM_REG_QVOQIDX_45 0x1681a8
2843 #define QM_REG_QVOQIDX_46 0x1681ac
2844 #define QM_REG_QVOQIDX_47 0x1681b0
2845 #define QM_REG_QVOQIDX_48 0x1681b4
2846 #define QM_REG_QVOQIDX_49 0x1681b8
2847 #define QM_REG_QVOQIDX_5 0x168108
2848 #define QM_REG_QVOQIDX_50 0x1681bc
2849 #define QM_REG_QVOQIDX_51 0x1681c0
2850 #define QM_REG_QVOQIDX_52 0x1681c4
2851 #define QM_REG_QVOQIDX_53 0x1681c8
2852 #define QM_REG_QVOQIDX_54 0x1681cc
2853 #define QM_REG_QVOQIDX_55 0x1681d0
2854 #define QM_REG_QVOQIDX_56 0x1681d4
2855 #define QM_REG_QVOQIDX_57 0x1681d8
2856 #define QM_REG_QVOQIDX_58 0x1681dc
2857 #define QM_REG_QVOQIDX_59 0x1681e0
2858 #define QM_REG_QVOQIDX_50 0x1681bc
2859 #define QM_REG_QVOQIDX_51 0x1681c0
2860 #define QM_REG_QVOQIDX_52 0x1681c4
2861 #define QM_REG_QVOQIDX_53 0x1681c8
2862 #define QM_REG_QVOQIDX_54 0x1681cc
2863 #define QM_REG_QVOQIDX_55 0x1681d0
2864 #define QM_REG_QVOQIDX_56 0x1681d4
2865 #define QM_REG_QVOQIDX_57 0x1681d8
2866 #define QM_REG_QVOQIDX_58 0x1681dc
2867 #define QM_REG_QVOQIDX_59 0x1681e0
2868 #define QM_REG_QVOQIDX_6 0x16810c
2869 #define QM_REG_QVOQIDX_60 0x1681e4
2870 #define QM_REG_QVOQIDX_61 0x1681e8
2871 #define QM_REG_QVOQIDX_62 0x1681ec
2872 #define QM_REG_QVOQIDX_63 0x1681f0
2873 #define QM_REG_QVOQIDX_64 0x16e40c
2874 #define QM_REG_QVOQIDX_65 0x16e410
2875 #define QM_REG_QVOQIDX_66 0x16e414
2876 #define QM_REG_QVOQIDX_67 0x16e418
2877 #define QM_REG_QVOQIDX_68 0x16e41c
2878 #define QM_REG_QVOQIDX_69 0x16e420
2879 #define QM_REG_QVOQIDX_60 0x1681e4
2880 #define QM_REG_QVOQIDX_61 0x1681e8
2881 #define QM_REG_QVOQIDX_62 0x1681ec
2882 #define QM_REG_QVOQIDX_63 0x1681f0
2883 #define QM_REG_QVOQIDX_64 0x16e40c
2884 #define QM_REG_QVOQIDX_65 0x16e410
2885 #define QM_REG_QVOQIDX_69 0x16e420
2886 #define QM_REG_QVOQIDX_7 0x168110
2887 #define QM_REG_QVOQIDX_70 0x16e424
2888 #define QM_REG_QVOQIDX_71 0x16e428
2889 #define QM_REG_QVOQIDX_72 0x16e42c
2890 #define QM_REG_QVOQIDX_73 0x16e430
2891 #define QM_REG_QVOQIDX_74 0x16e434
2892 #define QM_REG_QVOQIDX_75 0x16e438
2893 #define QM_REG_QVOQIDX_76 0x16e43c
2894 #define QM_REG_QVOQIDX_77 0x16e440
2895 #define QM_REG_QVOQIDX_78 0x16e444
2896 #define QM_REG_QVOQIDX_79 0x16e448
2897 #define QM_REG_QVOQIDX_70 0x16e424
2898 #define QM_REG_QVOQIDX_71 0x16e428
2899 #define QM_REG_QVOQIDX_72 0x16e42c
2900 #define QM_REG_QVOQIDX_73 0x16e430
2901 #define QM_REG_QVOQIDX_74 0x16e434
2902 #define QM_REG_QVOQIDX_75 0x16e438
2903 #define QM_REG_QVOQIDX_76 0x16e43c
2904 #define QM_REG_QVOQIDX_77 0x16e440
2905 #define QM_REG_QVOQIDX_78 0x16e444
2906 #define QM_REG_QVOQIDX_79 0x16e448
2907 #define QM_REG_QVOQIDX_8 0x168114
2908 #define QM_REG_QVOQIDX_80 0x16e44c
2909 #define QM_REG_QVOQIDX_81 0x16e450
2910 #define QM_REG_QVOQIDX_82 0x16e454
2911 #define QM_REG_QVOQIDX_83 0x16e458
2912 #define QM_REG_QVOQIDX_84 0x16e45c
2913 #define QM_REG_QVOQIDX_85 0x16e460
2914 #define QM_REG_QVOQIDX_86 0x16e464
2915 #define QM_REG_QVOQIDX_87 0x16e468
2916 #define QM_REG_QVOQIDX_88 0x16e46c
2917 #define QM_REG_QVOQIDX_89 0x16e470
2918 #define QM_REG_QVOQIDX_80 0x16e44c
2919 #define QM_REG_QVOQIDX_81 0x16e450
2920 #define QM_REG_QVOQIDX_85 0x16e460
2921 #define QM_REG_QVOQIDX_86 0x16e464
2922 #define QM_REG_QVOQIDX_87 0x16e468
2923 #define QM_REG_QVOQIDX_88 0x16e46c
2924 #define QM_REG_QVOQIDX_89 0x16e470
2925 #define QM_REG_QVOQIDX_9 0x168118
2926 #define QM_REG_QVOQIDX_90 0x16e474
2927 #define QM_REG_QVOQIDX_91 0x16e478
2928 #define QM_REG_QVOQIDX_92 0x16e47c
2929 #define QM_REG_QVOQIDX_93 0x16e480
2930 #define QM_REG_QVOQIDX_94 0x16e484
2931 #define QM_REG_QVOQIDX_95 0x16e488
2932 #define QM_REG_QVOQIDX_96 0x16e48c
2933 #define QM_REG_QVOQIDX_97 0x16e490
2934 #define QM_REG_QVOQIDX_98 0x16e494
2935 #define QM_REG_QVOQIDX_99 0x16e498
2936 #define QM_REG_QVOQIDX_90 0x16e474
2937 #define QM_REG_QVOQIDX_91 0x16e478
2938 #define QM_REG_QVOQIDX_92 0x16e47c
2939 #define QM_REG_QVOQIDX_93 0x16e480
2940 #define QM_REG_QVOQIDX_94 0x16e484
2941 #define QM_REG_QVOQIDX_95 0x16e488
2942 #define QM_REG_QVOQIDX_96 0x16e48c
2943 #define QM_REG_QVOQIDX_97 0x16e490
2944 #define QM_REG_QVOQIDX_98 0x16e494
2945 #define QM_REG_QVOQIDX_99 0x16e498
2946 /* [RW 1] Initialization bit command */
2947 #define QM_REG_SOFT_RESET 0x168428
2948 /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
2949 #define QM_REG_TASKCRDCOST_0 0x16809c
2950 #define QM_REG_TASKCRDCOST_1 0x1680a0
2951 #define QM_REG_TASKCRDCOST_10 0x1680c4
2952 #define QM_REG_TASKCRDCOST_11 0x1680c8
2953 #define QM_REG_TASKCRDCOST_2 0x1680a4
2954 #define QM_REG_TASKCRDCOST_4 0x1680ac
2955 #define QM_REG_TASKCRDCOST_5 0x1680b0
2956 /* [R 6] Keep the fill level of the fifo from write client 3 */
2957 #define QM_REG_TQM_WRC_FIFOLVL 0x168010
2958 /* [R 6] Keep the fill level of the fifo from write client 2 */
2959 #define QM_REG_UQM_WRC_FIFOLVL 0x168008
2960 /* [RC 32] Credit update error register */
2961 #define QM_REG_VOQCRDERRREG 0x168408
2962 /* [R 16] The credit value for each VOQ */
2963 #define QM_REG_VOQCREDIT_0 0x1682d0
2964 #define QM_REG_VOQCREDIT_1 0x1682d4
2965 #define QM_REG_VOQCREDIT_10 0x1682f8
2966 #define QM_REG_VOQCREDIT_11 0x1682fc
2967 #define QM_REG_VOQCREDIT_4 0x1682e0
2968 /* [RW 16] The credit value that if above the QM is considered almost full */
2969 #define QM_REG_VOQCREDITAFULLTHR 0x168090
2970 /* [RW 16] The init and maximum credit for each VoQ */
2971 #define QM_REG_VOQINITCREDIT_0 0x168060
2972 #define QM_REG_VOQINITCREDIT_1 0x168064
2973 #define QM_REG_VOQINITCREDIT_10 0x168088
2974 #define QM_REG_VOQINITCREDIT_11 0x16808c
2975 #define QM_REG_VOQINITCREDIT_2 0x168068
2976 #define QM_REG_VOQINITCREDIT_4 0x168070
2977 #define QM_REG_VOQINITCREDIT_5 0x168074
2978 /* [RW 1] The port of which VOQ belongs */
2979 #define QM_REG_VOQPORT_0 0x1682a0
2980 #define QM_REG_VOQPORT_1 0x1682a4
2981 #define QM_REG_VOQPORT_10 0x1682c8
2982 #define QM_REG_VOQPORT_11 0x1682cc
2983 #define QM_REG_VOQPORT_2 0x1682a8
2984 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2985 #define QM_REG_VOQQMASK_0_LSB 0x168240
2986 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2987 #define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524
2988 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2989 #define QM_REG_VOQQMASK_0_MSB 0x168244
2990 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2991 #define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528
2992 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2993 #define QM_REG_VOQQMASK_10_LSB 0x168290
2994 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2995 #define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574
2996 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2997 #define QM_REG_VOQQMASK_10_MSB 0x168294
2998 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2999 #define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578
3000 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3001 #define QM_REG_VOQQMASK_11_LSB 0x168298
3002 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3003 #define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c
3004 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3005 #define QM_REG_VOQQMASK_11_MSB 0x16829c
3006 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3007 #define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580
3008 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3009 #define QM_REG_VOQQMASK_1_LSB 0x168248
3010 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3011 #define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c
3012 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3013 #define QM_REG_VOQQMASK_1_MSB 0x16824c
3014 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3015 #define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530
3016 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3017 #define QM_REG_VOQQMASK_2_LSB 0x168250
3018 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3019 #define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534
3020 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3021 #define QM_REG_VOQQMASK_2_MSB 0x168254
3022 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3023 #define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538
3024 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3025 #define QM_REG_VOQQMASK_3_LSB 0x168258
3026 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3027 #define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c
3028 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3029 #define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540
3030 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3031 #define QM_REG_VOQQMASK_4_LSB 0x168260
3032 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3033 #define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544
3034 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3035 #define QM_REG_VOQQMASK_4_MSB 0x168264
3036 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3037 #define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548
3038 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3039 #define QM_REG_VOQQMASK_5_LSB 0x168268
3040 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3041 #define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c
3042 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3043 #define QM_REG_VOQQMASK_5_MSB 0x16826c
3044 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3045 #define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550
3046 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3047 #define QM_REG_VOQQMASK_6_LSB 0x168270
3048 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3049 #define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554
3050 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3051 #define QM_REG_VOQQMASK_6_MSB 0x168274
3052 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3053 #define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558
3054 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3055 #define QM_REG_VOQQMASK_7_LSB 0x168278
3056 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3057 #define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c
3058 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3059 #define QM_REG_VOQQMASK_7_MSB 0x16827c
3060 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3061 #define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560
3062 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3063 #define QM_REG_VOQQMASK_8_LSB 0x168280
3064 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3065 #define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564
3066 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3067 #define QM_REG_VOQQMASK_8_MSB 0x168284
3068 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3069 #define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568
3070 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3071 #define QM_REG_VOQQMASK_9_LSB 0x168288
3072 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3073 #define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c
3074 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3075 #define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570
3076 /* [RW 32] Wrr weights */
3077 #define QM_REG_WRRWEIGHTS_0 0x16880c
3078 #define QM_REG_WRRWEIGHTS_1 0x168810
3079 #define QM_REG_WRRWEIGHTS_10 0x168814
3080 #define QM_REG_WRRWEIGHTS_10_SIZE 1
3081 /* [RW 32] Wrr weights */
3082 #define QM_REG_WRRWEIGHTS_11 0x168818
3083 #define QM_REG_WRRWEIGHTS_11_SIZE 1
3084 /* [RW 32] Wrr weights */
3085 #define QM_REG_WRRWEIGHTS_12 0x16881c
3086 #define QM_REG_WRRWEIGHTS_12_SIZE 1
3087 /* [RW 32] Wrr weights */
3088 #define QM_REG_WRRWEIGHTS_13 0x168820
3089 #define QM_REG_WRRWEIGHTS_13_SIZE 1
3090 /* [RW 32] Wrr weights */
3091 #define QM_REG_WRRWEIGHTS_14 0x168824
3092 #define QM_REG_WRRWEIGHTS_14_SIZE 1
3093 /* [RW 32] Wrr weights */
3094 #define QM_REG_WRRWEIGHTS_15 0x168828
3095 #define QM_REG_WRRWEIGHTS_15_SIZE 1
3096 /* [RW 32] Wrr weights */
3097 #define QM_REG_WRRWEIGHTS_16 0x16e000
3098 #define QM_REG_WRRWEIGHTS_16_SIZE 1
3099 /* [RW 32] Wrr weights */
3100 #define QM_REG_WRRWEIGHTS_17 0x16e004
3101 #define QM_REG_WRRWEIGHTS_17_SIZE 1
3102 /* [RW 32] Wrr weights */
3103 #define QM_REG_WRRWEIGHTS_18 0x16e008
3104 #define QM_REG_WRRWEIGHTS_18_SIZE 1
3105 /* [RW 32] Wrr weights */
3106 #define QM_REG_WRRWEIGHTS_19 0x16e00c
3107 #define QM_REG_WRRWEIGHTS_19_SIZE 1
3108 /* [RW 32] Wrr weights */
3109 #define QM_REG_WRRWEIGHTS_10 0x168814
3110 #define QM_REG_WRRWEIGHTS_11 0x168818
3111 #define QM_REG_WRRWEIGHTS_12 0x16881c
3112 #define QM_REG_WRRWEIGHTS_13 0x168820
3113 #define QM_REG_WRRWEIGHTS_14 0x168824
3114 #define QM_REG_WRRWEIGHTS_15 0x168828
3115 #define QM_REG_WRRWEIGHTS_16 0x16e000
3116 #define QM_REG_WRRWEIGHTS_17 0x16e004
3117 #define QM_REG_WRRWEIGHTS_18 0x16e008
3118 #define QM_REG_WRRWEIGHTS_19 0x16e00c
3119 #define QM_REG_WRRWEIGHTS_2 0x16882c
3120 #define QM_REG_WRRWEIGHTS_20 0x16e010
3121 #define QM_REG_WRRWEIGHTS_20_SIZE 1
3122 /* [RW 32] Wrr weights */
3123 #define QM_REG_WRRWEIGHTS_21 0x16e014
3124 #define QM_REG_WRRWEIGHTS_21_SIZE 1
3125 /* [RW 32] Wrr weights */
3126 #define QM_REG_WRRWEIGHTS_22 0x16e018
3127 #define QM_REG_WRRWEIGHTS_22_SIZE 1
3128 /* [RW 32] Wrr weights */
3129 #define QM_REG_WRRWEIGHTS_23 0x16e01c
3130 #define QM_REG_WRRWEIGHTS_23_SIZE 1
3131 /* [RW 32] Wrr weights */
3132 #define QM_REG_WRRWEIGHTS_24 0x16e020
3133 #define QM_REG_WRRWEIGHTS_24_SIZE 1
3134 /* [RW 32] Wrr weights */
3135 #define QM_REG_WRRWEIGHTS_25 0x16e024
3136 #define QM_REG_WRRWEIGHTS_25_SIZE 1
3137 /* [RW 32] Wrr weights */
3138 #define QM_REG_WRRWEIGHTS_26 0x16e028
3139 #define QM_REG_WRRWEIGHTS_26_SIZE 1
3140 /* [RW 32] Wrr weights */
3141 #define QM_REG_WRRWEIGHTS_27 0x16e02c
3142 #define QM_REG_WRRWEIGHTS_27_SIZE 1
3143 /* [RW 32] Wrr weights */
3144 #define QM_REG_WRRWEIGHTS_28 0x16e030
3145 #define QM_REG_WRRWEIGHTS_28_SIZE 1
3146 /* [RW 32] Wrr weights */
3147 #define QM_REG_WRRWEIGHTS_29 0x16e034
3148 #define QM_REG_WRRWEIGHTS_29_SIZE 1
3149 /* [RW 32] Wrr weights */
3150 #define QM_REG_WRRWEIGHTS_20 0x16e010
3151 #define QM_REG_WRRWEIGHTS_21 0x16e014
3152 #define QM_REG_WRRWEIGHTS_22 0x16e018
3153 #define QM_REG_WRRWEIGHTS_23 0x16e01c
3154 #define QM_REG_WRRWEIGHTS_24 0x16e020
3155 #define QM_REG_WRRWEIGHTS_25 0x16e024
3156 #define QM_REG_WRRWEIGHTS_26 0x16e028
3157 #define QM_REG_WRRWEIGHTS_27 0x16e02c
3158 #define QM_REG_WRRWEIGHTS_28 0x16e030
3159 #define QM_REG_WRRWEIGHTS_29 0x16e034
3160 #define QM_REG_WRRWEIGHTS_3 0x168830
3161 #define QM_REG_WRRWEIGHTS_30 0x16e038
3162 #define QM_REG_WRRWEIGHTS_30_SIZE 1
3163 /* [RW 32] Wrr weights */
3164 #define QM_REG_WRRWEIGHTS_31 0x16e03c
3165 #define QM_REG_WRRWEIGHTS_31_SIZE 1
3166 /* [RW 32] Wrr weights */
3167 #define QM_REG_WRRWEIGHTS_30 0x16e038
3168 #define QM_REG_WRRWEIGHTS_31 0x16e03c
3169 #define QM_REG_WRRWEIGHTS_4 0x168834
3170 #define QM_REG_WRRWEIGHTS_5 0x168838
3171 #define QM_REG_WRRWEIGHTS_6 0x16883c
3172 #define QM_REG_WRRWEIGHTS_7 0x168840
3173 #define QM_REG_WRRWEIGHTS_8 0x168844
3174 #define QM_REG_WRRWEIGHTS_9 0x168848
3175 /* [R 6] Keep the fill level of the fifo from write client 1 */
3176 #define QM_REG_XQM_WRC_FIFOLVL 0x168000
3177 #define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3178 #define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3179 #define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3180 #define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3181 #define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3182 #define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3183 #define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3184 #define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3185 #define CCM_CCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3186 #define CCM_CCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3187 #define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3188 #define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3189 #define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3190 #define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3191 #define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3192 #define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3193 #define CDU_CDU_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3194 #define CDU_CDU_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3195 #define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3196 #define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3197 #define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3198 #define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3199 #define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3200 #define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3201 #define CFC_CFC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3202 #define CFC_CFC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3203 #define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3204 #define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3205 #define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3206 #define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3207 #define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3208 #define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3209 #define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3210 #define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3211 #define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3212 #define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3213 #define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3214 #define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3215 #define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3216 #define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3217 #define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3218 #define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3219 #define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3220 #define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3221 #define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3222 #define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3223 #define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3224 #define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3225 #define DBG_DBG_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3226 #define DBG_DBG_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3227 #define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3228 #define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3229 #define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3230 #define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3231 #define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3232 #define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3233 #define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3234 #define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3235 #define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3236 #define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3237 #define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3238 #define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3239 #define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3240 #define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3241 #define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3242 #define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3243 #define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3244 #define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3245 #define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3246 #define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3247 #define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3248 #define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3249 #define HC_HC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3250 #define HC_HC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3251 #define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3252 #define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3253 #define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3254 #define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3255 #define HC_HC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3256 #define HC_HC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3257 #define MISC_MISC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3258 #define MISC_MISC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3259 #define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3260 #define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3261 #define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3262 #define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3263 #define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3264 #define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3265 #define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3266 #define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3267 #define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3268 #define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3269 #define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3270 #define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3271 #define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3272 #define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3273 #define PBF_PBF_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3274 #define PBF_PBF_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3275 #define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3276 #define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3277 #define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3278 #define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3279 #define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3280 #define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3281 #define PB_PB_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3282 #define PB_PB_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3283 #define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3284 #define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3285 #define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3286 #define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3287 #define PB_PB_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3288 #define PB_PB_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3289 #define PRS_PRS_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3290 #define PRS_PRS_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3291 #define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3292 #define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3293 #define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3294 #define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3295 #define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3296 #define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3297 #define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3298 #define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3299 #define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3300 #define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3301 #define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3302 #define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3303 #define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3304 #define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3305 #define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3306 #define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3307 #define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3308 #define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3309 #define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3310 #define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3311 #define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3312 #define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3313 #define QM_QM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3314 #define QM_QM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3315 #define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3316 #define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3317 #define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3318 #define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3319 #define QM_QM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3320 #define QM_QM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3321 #define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3322 #define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3323 #define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3324 #define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3325 #define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3326 #define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3327 #define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3328 #define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3329 #define SRC_SRC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3330 #define SRC_SRC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3331 #define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3332 #define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3333 #define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3334 #define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3335 #define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3336 #define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3337 #define TCM_TCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3338 #define TCM_TCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3339 #define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3340 #define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3341 #define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3342 #define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3343 #define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3344 #define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3345 #define TM_TM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3346 #define TM_TM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3347 #define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3348 #define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3349 #define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3350 #define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3351 #define TM_TM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3352 #define TM_TM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3353 #define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3354 #define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3355 #define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3356 #define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3357 #define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3358 #define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3359 #define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3360 #define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3361 #define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3362 #define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3363 #define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3364 #define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3365 #define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3366 #define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3367 #define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3368 #define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3369 #define UCM_UCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3370 #define UCM_UCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3371 #define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3372 #define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3373 #define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3374 #define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3375 #define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3376 #define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3377 #define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3378 #define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3379 #define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3380 #define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3381 #define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3382 #define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3383 #define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3384 #define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3385 #define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3386 #define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3387 #define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3388 #define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3389 #define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3390 #define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3391 #define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3392 #define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3393 #define XCM_XCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3394 #define XCM_XCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3395 #define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3396 #define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3397 #define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3398 #define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3399 #define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3400 #define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3401 #define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3402 #define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3403 #define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3404 #define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3405 #define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3406 #define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3407 #define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3408 #define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3409 #define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3410 #define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3411 #define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3412 #define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3413 #define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3414 #define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3415 #define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3416 #define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3417 #define CFC_DEBUG1_REG_WRITE_AC (0x1<<4)
3418 #define CFC_DEBUG1_REG_WRITE_AC_SIZE 4
3419 /* [R 1] debug only: This bit indicates whether indicates that external
3420 buffer was wrapped (oldest data was thrown); Relevant only when
3421 ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */
3422 #define DBG_REG_WRAP_ON_EXT_BUFFER 0xc124
3423 #define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 1
3424 /* [R 1] debug only: This bit indicates whether the internal buffer was
3425 wrapped (oldest data was thrown) Relevant only when
3426 ~dbg_registers_debug_target=0 (internal buffer) */
3427 #define DBG_REG_WRAP_ON_INT_BUFFER 0xc128
3428 #define DBG_REG_WRAP_ON_INT_BUFFER_SIZE 1
3429 #define QM_QM_PRTY_STS_REG_WRBUFF (0x1<<8)
3430 #define QM_QM_PRTY_STS_REG_WRBUFF_SIZE 8
3431 #define QM_QM_PRTY_STS_CLR_REG_WRBUFF (0x1<<8)
3432 #define QM_QM_PRTY_STS_CLR_REG_WRBUFF_SIZE 8
3433 #define QM_QM_PRTY_STS_WR_REG_WRBUFF (0x1<<8)
3434 #define QM_QM_PRTY_STS_WR_REG_WRBUFF_SIZE 8
3435 #define QM_QM_PRTY_MASK_REG_WRBUFF (0x1<<8)
3436 #define QM_QM_PRTY_MASK_REG_WRBUFF_SIZE 8
3437 /* [RW 32] Wrr weights */
3438 #define QM_REG_WRRWEIGHTS_0 0x16880c
3439 #define QM_REG_WRRWEIGHTS_0_SIZE 1
3440 /* [RW 32] Wrr weights */
3441 #define QM_REG_WRRWEIGHTS_1 0x168810
3442 #define QM_REG_WRRWEIGHTS_1_SIZE 1
3443 /* [RW 32] Wrr weights */
3444 #define QM_REG_WRRWEIGHTS_10 0x168814
3445 #define QM_REG_WRRWEIGHTS_10_SIZE 1
3446 /* [RW 32] Wrr weights */
3447 #define QM_REG_WRRWEIGHTS_11 0x168818
3448 #define QM_REG_WRRWEIGHTS_11_SIZE 1
3449 /* [RW 32] Wrr weights */
3450 #define QM_REG_WRRWEIGHTS_12 0x16881c
3451 #define QM_REG_WRRWEIGHTS_12_SIZE 1
3452 /* [RW 32] Wrr weights */
3453 #define QM_REG_WRRWEIGHTS_13 0x168820
3454 #define QM_REG_WRRWEIGHTS_13_SIZE 1
3455 /* [RW 32] Wrr weights */
3456 #define QM_REG_WRRWEIGHTS_14 0x168824
3457 #define QM_REG_WRRWEIGHTS_14_SIZE 1
3458 /* [RW 32] Wrr weights */
3459 #define QM_REG_WRRWEIGHTS_15 0x168828
3460 #define QM_REG_WRRWEIGHTS_15_SIZE 1
3461 /* [RW 32] Wrr weights */
3462 #define QM_REG_WRRWEIGHTS_2 0x16882c
3463 #define QM_REG_WRRWEIGHTS_2_SIZE 1
3464 /* [RW 32] Wrr weights */
3465 #define QM_REG_WRRWEIGHTS_3 0x168830
3466 #define QM_REG_WRRWEIGHTS_3_SIZE 1
3467 /* [RW 32] Wrr weights */
3468 #define QM_REG_WRRWEIGHTS_4 0x168834
3469 #define QM_REG_WRRWEIGHTS_4_SIZE 1
3470 /* [RW 32] Wrr weights */
3471 #define QM_REG_WRRWEIGHTS_5 0x168838
3472 #define QM_REG_WRRWEIGHTS_5_SIZE 1
3473 /* [RW 32] Wrr weights */
3474 #define QM_REG_WRRWEIGHTS_6 0x16883c
3475 #define QM_REG_WRRWEIGHTS_6_SIZE 1
3476 /* [RW 32] Wrr weights */
3477 #define QM_REG_WRRWEIGHTS_7 0x168840
3478 #define QM_REG_WRRWEIGHTS_7_SIZE 1
3479 /* [RW 32] Wrr weights */
3480 #define QM_REG_WRRWEIGHTS_8 0x168844
3481 #define QM_REG_WRRWEIGHTS_8_SIZE 1
3482 /* [RW 32] Wrr weights */
3483 #define QM_REG_WRRWEIGHTS_9 0x168848
3484 #define QM_REG_WRRWEIGHTS_9_SIZE 1
3485 /* [RW 32] Wrr weights */
3486 #define QM_REG_WRRWEIGHTS_16 0x16e000
3487 #define QM_REG_WRRWEIGHTS_16_SIZE 1
3488 /* [RW 32] Wrr weights */
3489 #define QM_REG_WRRWEIGHTS_17 0x16e004
3490 #define QM_REG_WRRWEIGHTS_17_SIZE 1
3491 /* [RW 32] Wrr weights */
3492 #define QM_REG_WRRWEIGHTS_18 0x16e008
3493 #define QM_REG_WRRWEIGHTS_18_SIZE 1
3494 /* [RW 32] Wrr weights */
3495 #define QM_REG_WRRWEIGHTS_19 0x16e00c
3496 #define QM_REG_WRRWEIGHTS_19_SIZE 1
3497 /* [RW 32] Wrr weights */
3498 #define QM_REG_WRRWEIGHTS_20 0x16e010
3499 #define QM_REG_WRRWEIGHTS_20_SIZE 1
3500 /* [RW 32] Wrr weights */
3501 #define QM_REG_WRRWEIGHTS_21 0x16e014
3502 #define QM_REG_WRRWEIGHTS_21_SIZE 1
3503 /* [RW 32] Wrr weights */
3504 #define QM_REG_WRRWEIGHTS_22 0x16e018
3505 #define QM_REG_WRRWEIGHTS_22_SIZE 1
3506 /* [RW 32] Wrr weights */
3507 #define QM_REG_WRRWEIGHTS_23 0x16e01c
3508 #define QM_REG_WRRWEIGHTS_23_SIZE 1
3509 /* [RW 32] Wrr weights */
3510 #define QM_REG_WRRWEIGHTS_24 0x16e020
3511 #define QM_REG_WRRWEIGHTS_24_SIZE 1
3512 /* [RW 32] Wrr weights */
3513 #define QM_REG_WRRWEIGHTS_25 0x16e024
3514 #define QM_REG_WRRWEIGHTS_25_SIZE 1
3515 /* [RW 32] Wrr weights */
3516 #define QM_REG_WRRWEIGHTS_26 0x16e028
3517 #define QM_REG_WRRWEIGHTS_26_SIZE 1
3518 /* [RW 32] Wrr weights */
3519 #define QM_REG_WRRWEIGHTS_27 0x16e02c
3520 #define QM_REG_WRRWEIGHTS_27_SIZE 1
3521 /* [RW 32] Wrr weights */
3522 #define QM_REG_WRRWEIGHTS_28 0x16e030
3523 #define QM_REG_WRRWEIGHTS_28_SIZE 1
3524 /* [RW 32] Wrr weights */
3525 #define QM_REG_WRRWEIGHTS_29 0x16e034
3526 #define QM_REG_WRRWEIGHTS_29_SIZE 1
3527 /* [RW 32] Wrr weights */
3528 #define QM_REG_WRRWEIGHTS_30 0x16e038
3529 #define QM_REG_WRRWEIGHTS_30_SIZE 1
3530 /* [RW 32] Wrr weights */
3531 #define QM_REG_WRRWEIGHTS_31 0x16e03c
3532 #define QM_REG_WRRWEIGHTS_31_SIZE 1
3533 #define SRC_REG_COUNTFREE0 0x40500
3534 /* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
3535 ports. If set the searcher support 8 functions. */
3536 #define SRC_REG_E1HMF_ENABLE 0x404cc
3537 #define SRC_REG_FIRSTFREE0 0x40510
3538 #define SRC_REG_KEYRSS0_0 0x40408
3539 #define SRC_REG_KEYRSS0_7 0x40424
3540 #define SRC_REG_KEYRSS1_9 0x40454
3541 #define SRC_REG_KEYSEARCH_0 0x40458
3542 #define SRC_REG_KEYSEARCH_1 0x4045c
3543 #define SRC_REG_KEYSEARCH_2 0x40460
3544 #define SRC_REG_KEYSEARCH_3 0x40464
3545 #define SRC_REG_KEYSEARCH_4 0x40468
3546 #define SRC_REG_KEYSEARCH_5 0x4046c
3547 #define SRC_REG_KEYSEARCH_6 0x40470
3548 #define SRC_REG_KEYSEARCH_7 0x40474
3549 #define SRC_REG_KEYSEARCH_8 0x40478
3550 #define SRC_REG_KEYSEARCH_9 0x4047c
3551 #define SRC_REG_LASTFREE0 0x40530
3552 #define SRC_REG_NUMBER_HASH_BITS0 0x40400
3553 /* [RW 1] Reset internal state machines. */
3554 #define SRC_REG_SOFT_RST 0x4049c
3555 /* [R 3] Interrupt register #0 read */
3556 #define SRC_REG_SRC_INT_STS 0x404ac
3557 /* [RW 3] Parity mask register #0 read/write */
3558 #define SRC_REG_SRC_PRTY_MASK 0x404c8
3559 /* [R 3] Parity register #0 read */
3560 #define SRC_REG_SRC_PRTY_STS 0x404bc
3561 /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
3562 #define TCM_REG_CAM_OCCUP 0x5017c
3563 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
3564 disregarded; valid output is deasserted; all other signals are treated as
3565 usual; if 1 - normal activity. */
3566 #define TCM_REG_CDU_AG_RD_IFEN 0x50034
3567 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
3568 are disregarded; all other signals are treated as usual; if 1 - normal
3570 #define TCM_REG_CDU_AG_WR_IFEN 0x50030
3571 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
3572 disregarded; valid output is deasserted; all other signals are treated as
3573 usual; if 1 - normal activity. */
3574 #define TCM_REG_CDU_SM_RD_IFEN 0x5003c
3575 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
3576 input is disregarded; all other signals are treated as usual; if 1 -
3578 #define TCM_REG_CDU_SM_WR_IFEN 0x50038
3579 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
3580 the initial credit value; read returns the current value of the credit
3581 counter. Must be initialized to 1 at start-up. */
3582 #define TCM_REG_CFC_INIT_CRD 0x50204
3583 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
3584 weight 8 (the most prioritised); 1 stands for weight 1(least
3585 prioritised); 2 stands for weight 2; tc. */
3586 #define TCM_REG_CP_WEIGHT 0x500c0
3587 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
3588 disregarded; acknowledge output is deasserted; all other signals are
3589 treated as usual; if 1 - normal activity. */
3590 #define TCM_REG_CSEM_IFEN 0x5002c
3591 /* [RC 1] Message length mismatch (relative to last indication) at the In#9
3593 #define TCM_REG_CSEM_LENGTH_MIS 0x50174
3594 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
3595 weight 8 (the most prioritised); 1 stands for weight 1(least
3596 prioritised); 2 stands for weight 2; tc. */
3597 #define TCM_REG_CSEM_WEIGHT 0x500bc
3598 /* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */
3599 #define TCM_REG_ERR_EVNT_ID 0x500a0
3600 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
3601 #define TCM_REG_ERR_TCM_HDR 0x5009c
3602 /* [RW 8] The Event ID for Timers expiration. */
3603 #define TCM_REG_EXPR_EVNT_ID 0x500a4
3604 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
3605 writes the initial credit value; read returns the current value of the
3606 credit counter. Must be initialized to 64 at start-up. */
3607 #define TCM_REG_FIC0_INIT_CRD 0x5020c
3608 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
3609 writes the initial credit value; read returns the current value of the
3610 credit counter. Must be initialized to 64 at start-up. */
3611 #define TCM_REG_FIC1_INIT_CRD 0x50210
3612 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
3613 - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr;
3614 ~tcm_registers_gr_ld0_pr.gr_ld0_pr and
3615 ~tcm_registers_gr_ld1_pr.gr_ld1_pr. */
3616 #define TCM_REG_GR_ARB_TYPE 0x50114
3617 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
3618 highest priority is 3. It is supposed that the Store channel is the
3619 compliment of the other 3 groups. */
3620 #define TCM_REG_GR_LD0_PR 0x5011c
3621 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
3622 highest priority is 3. It is supposed that the Store channel is the
3623 compliment of the other 3 groups. */
3624 #define TCM_REG_GR_LD1_PR 0x50120
3625 /* [RW 4] The number of double REG-pairs; loaded from the STORM context and
3626 sent to STORM; for a specific connection type. The double REG-pairs are
3627 used to align to STORM context row size of 128 bits. The offset of these
3628 data in the STORM context is always 0. Index _i stands for the connection
3629 type (one of 16). */
3630 #define TCM_REG_N_SM_CTX_LD_0 0x50050
3631 #define TCM_REG_N_SM_CTX_LD_1 0x50054
3632 #define TCM_REG_N_SM_CTX_LD_10 0x50078
3633 #define TCM_REG_N_SM_CTX_LD_11 0x5007c
3634 #define TCM_REG_N_SM_CTX_LD_12 0x50080
3635 #define TCM_REG_N_SM_CTX_LD_13 0x50084
3636 #define TCM_REG_N_SM_CTX_LD_14 0x50088
3637 #define TCM_REG_N_SM_CTX_LD_15 0x5008c
3638 #define TCM_REG_N_SM_CTX_LD_2 0x50058
3639 #define TCM_REG_N_SM_CTX_LD_3 0x5005c
3640 #define TCM_REG_N_SM_CTX_LD_4 0x50060
3641 #define TCM_REG_N_SM_CTX_LD_5 0x50064
3642 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
3643 acknowledge output is deasserted; all other signals are treated as usual;
3644 if 1 - normal activity. */
3645 #define TCM_REG_PBF_IFEN 0x50024
3646 /* [RC 1] Message length mismatch (relative to last indication) at the In#7
3648 #define TCM_REG_PBF_LENGTH_MIS 0x5016c
3649 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
3650 weight 8 (the most prioritised); 1 stands for weight 1(least
3651 prioritised); 2 stands for weight 2; tc. */
3652 #define TCM_REG_PBF_WEIGHT 0x500b4
3653 #define TCM_REG_PHYS_QNUM0_0 0x500e0
3654 #define TCM_REG_PHYS_QNUM0_1 0x500e4
3655 #define TCM_REG_PHYS_QNUM1_0 0x500e8
3656 #define TCM_REG_PHYS_QNUM1_1 0x500ec
3657 #define TCM_REG_PHYS_QNUM2_0 0x500f0
3658 #define TCM_REG_PHYS_QNUM2_1 0x500f4
3659 #define TCM_REG_PHYS_QNUM3_0 0x500f8
3660 #define TCM_REG_PHYS_QNUM3_1 0x500fc
3661 /* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded;
3662 acknowledge output is deasserted; all other signals are treated as usual;
3663 if 1 - normal activity. */
3664 #define TCM_REG_PRS_IFEN 0x50020
3665 /* [RC 1] Message length mismatch (relative to last indication) at the In#6
3667 #define TCM_REG_PRS_LENGTH_MIS 0x50168
3668 /* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for
3669 weight 8 (the most prioritised); 1 stands for weight 1(least
3670 prioritised); 2 stands for weight 2; tc. */
3671 #define TCM_REG_PRS_WEIGHT 0x500b0
3672 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
3673 #define TCM_REG_STOP_EVNT_ID 0x500a8
3674 /* [RC 1] Message length mismatch (relative to last indication) at the STORM
3676 #define TCM_REG_STORM_LENGTH_MIS 0x50160
3677 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
3678 disregarded; acknowledge output is deasserted; all other signals are
3679 treated as usual; if 1 - normal activity. */
3680 #define TCM_REG_STORM_TCM_IFEN 0x50010
3681 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
3682 weight 8 (the most prioritised); 1 stands for weight 1(least
3683 prioritised); 2 stands for weight 2; tc. */
3684 #define TCM_REG_STORM_WEIGHT 0x500ac
3685 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
3686 acknowledge output is deasserted; all other signals are treated as usual;
3687 if 1 - normal activity. */
3688 #define TCM_REG_TCM_CFC_IFEN 0x50040
3689 /* [RW 11] Interrupt mask register #0 read/write */
3690 #define TCM_REG_TCM_INT_MASK 0x501dc
3691 /* [R 11] Interrupt register #0 read */
3692 #define TCM_REG_TCM_INT_STS 0x501d0
3693 /* [R 27] Parity register #0 read */
3694 #define TCM_REG_TCM_PRTY_STS 0x501e0
3695 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
3696 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
3697 Is used to determine the number of the AG context REG-pairs written back;
3698 when the input message Reg1WbFlg isn't set. */
3699 #define TCM_REG_TCM_REG0_SZ 0x500d8
3700 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
3701 disregarded; valid is deasserted; all other signals are treated as usual;
3702 if 1 - normal activity. */
3703 #define TCM_REG_TCM_STORM0_IFEN 0x50004
3704 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
3705 disregarded; valid is deasserted; all other signals are treated as usual;
3706 if 1 - normal activity. */
3707 #define TCM_REG_TCM_STORM1_IFEN 0x50008
3708 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
3709 disregarded; valid is deasserted; all other signals are treated as usual;
3710 if 1 - normal activity. */
3711 #define TCM_REG_TCM_TQM_IFEN 0x5000c
3712 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
3713 #define TCM_REG_TCM_TQM_USE_Q 0x500d4
3714 /* [RW 28] The CM header for Timers expiration command. */
3715 #define TCM_REG_TM_TCM_HDR 0x50098
3716 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
3717 disregarded; acknowledge output is deasserted; all other signals are
3718 treated as usual; if 1 - normal activity. */
3719 #define TCM_REG_TM_TCM_IFEN 0x5001c
3720 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
3721 weight 8 (the most prioritised); 1 stands for weight 1(least
3722 prioritised); 2 stands for weight 2; tc. */
3723 #define TCM_REG_TM_WEIGHT 0x500d0
3724 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
3725 the initial credit value; read returns the current value of the credit
3726 counter. Must be initialized to 32 at start-up. */
3727 #define TCM_REG_TQM_INIT_CRD 0x5021c
3728 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
3729 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
3730 prioritised); 2 stands for weight 2; tc. */
3731 #define TCM_REG_TQM_P_WEIGHT 0x500c8
3732 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
3733 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
3734 prioritised); 2 stands for weight 2; tc. */
3735 #define TCM_REG_TQM_S_WEIGHT 0x500cc
3736 /* [RW 28] The CM header value for QM request (primary). */
3737 #define TCM_REG_TQM_TCM_HDR_P 0x50090
3738 /* [RW 28] The CM header value for QM request (secondary). */
3739 #define TCM_REG_TQM_TCM_HDR_S 0x50094
3740 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
3741 acknowledge output is deasserted; all other signals are treated as usual;
3742 if 1 - normal activity. */
3743 #define TCM_REG_TQM_TCM_IFEN 0x50014
3744 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
3745 acknowledge output is deasserted; all other signals are treated as usual;
3746 if 1 - normal activity. */
3747 #define TCM_REG_TSDM_IFEN 0x50018
3748 /* [RC 1] Message length mismatch (relative to last indication) at the SDM
3750 #define TCM_REG_TSDM_LENGTH_MIS 0x50164
3751 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
3752 weight 8 (the most prioritised); 1 stands for weight 1(least
3753 prioritised); 2 stands for weight 2; tc. */
3754 #define TCM_REG_TSDM_WEIGHT 0x500c4
3755 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
3756 disregarded; acknowledge output is deasserted; all other signals are
3757 treated as usual; if 1 - normal activity. */
3758 #define TCM_REG_USEM_IFEN 0x50028
3759 /* [RC 1] Message length mismatch (relative to last indication) at the In#8
3761 #define TCM_REG_USEM_LENGTH_MIS 0x50170
3762 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
3763 weight 8 (the most prioritised); 1 stands for weight 1(least
3764 prioritised); 2 stands for weight 2; tc. */
3765 #define TCM_REG_USEM_WEIGHT 0x500b8
3766 /* [RW 21] Indirect access to the descriptor table of the XX protection
3767 mechanism. The fields are: [5:0] - length of the message; 15:6] - message
3768 pointer; 20:16] - next pointer. */
3769 #define TCM_REG_XX_DESCR_TABLE 0x50280
3770 #define TCM_REG_XX_DESCR_TABLE_SIZE 32
3771 /* [R 6] Use to read the value of XX protection Free counter. */
3772 #define TCM_REG_XX_FREE 0x50178
3773 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
3774 of the Input Stage XX protection buffer by the XX protection pending
3775 messages. Max credit available - 127.Write writes the initial credit
3776 value; read returns the current value of the credit counter. Must be
3777 initialized to 19 at start-up. */
3778 #define TCM_REG_XX_INIT_CRD 0x50220
3779 /* [RW 6] Maximum link list size (messages locked) per connection in the XX
3781 #define TCM_REG_XX_MAX_LL_SZ 0x50044
3782 /* [RW 6] The maximum number of pending messages; which may be stored in XX
3783 protection. ~tcm_registers_xx_free.xx_free is read on read. */
3784 #define TCM_REG_XX_MSG_NUM 0x50224
3785 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
3786 #define TCM_REG_XX_OVFL_EVNT_ID 0x50048
3787 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
3788 The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
3790 #define TCM_REG_XX_TABLE 0x50240
3791 /* [RW 4] Load value for for cfc ac credit cnt. */
3792 #define TM_REG_CFC_AC_CRDCNT_VAL 0x164208
3793 /* [RW 4] Load value for cfc cld credit cnt. */
3794 #define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210
3795 /* [RW 8] Client0 context region. */
3796 #define TM_REG_CL0_CONT_REGION 0x164030
3797 /* [RW 8] Client1 context region. */
3798 #define TM_REG_CL1_CONT_REGION 0x164034
3799 /* [RW 8] Client2 context region. */
3800 #define TM_REG_CL2_CONT_REGION 0x164038
3801 /* [RW 2] Client in High priority client number. */
3802 #define TM_REG_CLIN_PRIOR0_CLIENT 0x164024
3803 /* [RW 4] Load value for clout0 cred cnt. */
3804 #define TM_REG_CLOUT_CRDCNT0_VAL 0x164220
3805 /* [RW 4] Load value for clout1 cred cnt. */
3806 #define TM_REG_CLOUT_CRDCNT1_VAL 0x164228
3807 /* [RW 4] Load value for clout2 cred cnt. */
3808 #define TM_REG_CLOUT_CRDCNT2_VAL 0x164230
3809 /* [RW 1] Enable client0 input. */
3810 #define TM_REG_EN_CL0_INPUT 0x164008
3811 /* [RW 1] Enable client1 input. */
3812 #define TM_REG_EN_CL1_INPUT 0x16400c
3813 /* [RW 1] Enable client2 input. */
3814 #define TM_REG_EN_CL2_INPUT 0x164010
3815 #define TM_REG_EN_LINEAR0_TIMER 0x164014
3816 /* [RW 1] Enable real time counter. */
3817 #define TM_REG_EN_REAL_TIME_CNT 0x1640d8
3818 /* [RW 1] Enable for Timers state machines. */
3819 #define TM_REG_EN_TIMERS 0x164000
3820 /* [RW 4] Load value for expiration credit cnt. CFC max number of
3821 outstanding load requests for timers (expiration) context loading. */
3822 #define TM_REG_EXP_CRDCNT_VAL 0x164238
3823 /* [RW 32] Linear0 logic address. */
3824 #define TM_REG_LIN0_LOGIC_ADDR 0x164240
3825 /* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
3826 #define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048
3827 /* [WB 64] Linear0 phy address. */
3828 #define TM_REG_LIN0_PHY_ADDR 0x164270
3829 /* [RW 1] Linear0 physical address valid. */
3830 #define TM_REG_LIN0_PHY_ADDR_VALID 0x164248
3831 /* [RW 24] Linear0 array scan timeout. */
3832 #define TM_REG_LIN0_SCAN_TIME 0x16403c
3833 /* [RW 32] Linear1 logic address. */
3834 #define TM_REG_LIN1_LOGIC_ADDR 0x164250
3835 /* [WB 64] Linear1 phy address. */
3836 #define TM_REG_LIN1_PHY_ADDR 0x164280
3837 /* [RW 1] Linear1 physical address valid. */
3838 #define TM_REG_LIN1_PHY_ADDR_VALID 0x164258
3839 /* [RW 6] Linear timer set_clear fifo threshold. */
3840 #define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070
3841 /* [RW 2] Load value for pci arbiter credit cnt. */
3842 #define TM_REG_PCIARB_CRDCNT_VAL 0x164260
3843 /* [RW 1] Timer software reset - active high. */
3844 #define TM_REG_TIMER_SOFT_RST 0x164004
3845 /* [RW 20] The amount of hardware cycles for each timer tick. */
3846 #define TM_REG_TIMER_TICK_SIZE 0x16401c
3847 /* [RW 8] Timers Context region. */
3848 #define TM_REG_TM_CONTEXT_REGION 0x164044
3849 /* [RW 1] Interrupt mask register #0 read/write */
3850 #define TM_REG_TM_INT_MASK 0x1640fc
3851 /* [R 1] Interrupt register #0 read */
3852 #define TM_REG_TM_INT_STS 0x1640f0
3853 /* [RW 8] The event id for aggregated interrupt 0 */
3854 #define TSDM_REG_AGG_INT_EVENT_0 0x42038
3855 #define TSDM_REG_AGG_INT_EVENT_1 0x4203c
3856 #define TSDM_REG_AGG_INT_EVENT_10 0x42060
3857 #define TSDM_REG_AGG_INT_EVENT_11 0x42064
3858 #define TSDM_REG_AGG_INT_EVENT_12 0x42068
3859 #define TSDM_REG_AGG_INT_EVENT_13 0x4206c
3860 #define TSDM_REG_AGG_INT_EVENT_14 0x42070
3861 #define TSDM_REG_AGG_INT_EVENT_15 0x42074
3862 #define TSDM_REG_AGG_INT_EVENT_16 0x42078
3863 #define TSDM_REG_AGG_INT_EVENT_17 0x4207c
3864 #define TSDM_REG_AGG_INT_EVENT_18 0x42080
3865 #define TSDM_REG_AGG_INT_EVENT_19 0x42084
3866 #define TSDM_REG_AGG_INT_EVENT_2 0x42040
3867 #define TSDM_REG_AGG_INT_EVENT_20 0x42088
3868 #define TSDM_REG_AGG_INT_EVENT_21 0x4208c
3869 #define TSDM_REG_AGG_INT_EVENT_22 0x42090
3870 #define TSDM_REG_AGG_INT_EVENT_23 0x42094
3871 #define TSDM_REG_AGG_INT_EVENT_24 0x42098
3872 #define TSDM_REG_AGG_INT_EVENT_25 0x4209c
3873 #define TSDM_REG_AGG_INT_EVENT_26 0x420a0
3874 #define TSDM_REG_AGG_INT_EVENT_27 0x420a4
3875 #define TSDM_REG_AGG_INT_EVENT_28 0x420a8
3876 #define TSDM_REG_AGG_INT_EVENT_29 0x420ac
3877 #define TSDM_REG_AGG_INT_EVENT_3 0x42044
3878 #define TSDM_REG_AGG_INT_EVENT_30 0x420b0
3879 #define TSDM_REG_AGG_INT_EVENT_31 0x420b4
3880 #define TSDM_REG_AGG_INT_EVENT_4 0x42048
3881 /* [RW 1] The T bit for aggregated interrupt 0 */
3882 #define TSDM_REG_AGG_INT_T_0 0x420b8
3883 #define TSDM_REG_AGG_INT_T_1 0x420bc
3884 #define TSDM_REG_AGG_INT_T_10 0x420e0
3885 #define TSDM_REG_AGG_INT_T_11 0x420e4
3886 #define TSDM_REG_AGG_INT_T_12 0x420e8
3887 #define TSDM_REG_AGG_INT_T_13 0x420ec
3888 #define TSDM_REG_AGG_INT_T_14 0x420f0
3889 #define TSDM_REG_AGG_INT_T_15 0x420f4
3890 #define TSDM_REG_AGG_INT_T_16 0x420f8
3891 #define TSDM_REG_AGG_INT_T_17 0x420fc
3892 #define TSDM_REG_AGG_INT_T_18 0x42100
3893 #define TSDM_REG_AGG_INT_T_19 0x42104
3894 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
3895 #define TSDM_REG_CFC_RSP_START_ADDR 0x42008
3896 /* [RW 16] The maximum value of the competion counter #0 */
3897 #define TSDM_REG_CMP_COUNTER_MAX0 0x4201c
3898 /* [RW 16] The maximum value of the competion counter #1 */
3899 #define TSDM_REG_CMP_COUNTER_MAX1 0x42020
3900 /* [RW 16] The maximum value of the competion counter #2 */
3901 #define TSDM_REG_CMP_COUNTER_MAX2 0x42024
3902 /* [RW 16] The maximum value of the competion counter #3 */
3903 #define TSDM_REG_CMP_COUNTER_MAX3 0x42028
3904 /* [RW 13] The start address in the internal RAM for the completion
3906 #define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c
3907 #define TSDM_REG_ENABLE_IN1 0x42238
3908 #define TSDM_REG_ENABLE_IN2 0x4223c
3909 #define TSDM_REG_ENABLE_OUT1 0x42240
3910 #define TSDM_REG_ENABLE_OUT2 0x42244
3911 /* [RW 4] The initial number of messages that can be sent to the pxp control
3912 interface without receiving any ACK. */
3913 #define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc
3914 /* [ST 32] The number of ACK after placement messages received */
3915 #define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c
3916 /* [ST 32] The number of packet end messages received from the parser */
3917 #define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274
3918 /* [ST 32] The number of requests received from the pxp async if */
3919 #define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278
3920 /* [ST 32] The number of commands received in queue 0 */
3921 #define TSDM_REG_NUM_OF_Q0_CMD 0x42248
3922 /* [ST 32] The number of commands received in queue 10 */
3923 #define TSDM_REG_NUM_OF_Q10_CMD 0x4226c
3924 /* [ST 32] The number of commands received in queue 11 */
3925 #define TSDM_REG_NUM_OF_Q11_CMD 0x42270
3926 /* [ST 32] The number of commands received in queue 1 */
3927 #define TSDM_REG_NUM_OF_Q1_CMD 0x4224c
3928 /* [ST 32] The number of commands received in queue 3 */
3929 #define TSDM_REG_NUM_OF_Q3_CMD 0x42250
3930 /* [ST 32] The number of commands received in queue 4 */
3931 #define TSDM_REG_NUM_OF_Q4_CMD 0x42254
3932 /* [ST 32] The number of commands received in queue 5 */
3933 #define TSDM_REG_NUM_OF_Q5_CMD 0x42258
3934 /* [ST 32] The number of commands received in queue 6 */
3935 #define TSDM_REG_NUM_OF_Q6_CMD 0x4225c
3936 /* [ST 32] The number of commands received in queue 7 */
3937 #define TSDM_REG_NUM_OF_Q7_CMD 0x42260
3938 /* [ST 32] The number of commands received in queue 8 */
3939 #define TSDM_REG_NUM_OF_Q8_CMD 0x42264
3940 /* [ST 32] The number of commands received in queue 9 */
3941 #define TSDM_REG_NUM_OF_Q9_CMD 0x42268
3942 /* [RW 13] The start address in the internal RAM for the packet end message */
3943 #define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014
3944 /* [RW 13] The start address in the internal RAM for queue counters */
3945 #define TSDM_REG_Q_COUNTER_START_ADDR 0x42010
3946 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
3947 #define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548
3948 /* [R 1] parser fifo empty in sdm_sync block */
3949 #define TSDM_REG_SYNC_PARSER_EMPTY 0x42550
3950 /* [R 1] parser serial fifo empty in sdm_sync block */
3951 #define TSDM_REG_SYNC_SYNC_EMPTY 0x42558
3952 /* [RW 32] Tick for timer counter. Applicable only when
3953 ~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */
3954 #define TSDM_REG_TIMER_TICK 0x42000
3955 /* [RW 32] Interrupt mask register #0 read/write */
3956 #define TSDM_REG_TSDM_INT_MASK_0 0x4229c
3957 #define TSDM_REG_TSDM_INT_MASK_1 0x422ac
3958 /* [R 32] Interrupt register #0 read */
3959 #define TSDM_REG_TSDM_INT_STS_0 0x42290
3960 #define TSDM_REG_TSDM_INT_STS_1 0x422a0
3961 /* [RW 11] Parity mask register #0 read/write */
3962 #define TSDM_REG_TSDM_PRTY_MASK 0x422bc
3963 /* [R 11] Parity register #0 read */
3964 #define TSDM_REG_TSDM_PRTY_STS 0x422b0
3965 /* [RW 5] The number of time_slots in the arbitration cycle */
3966 #define TSEM_REG_ARB_CYCLE_SIZE 0x180034
3967 /* [RW 3] The source that is associated with arbitration element 0. Source
3968 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3969 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
3970 #define TSEM_REG_ARB_ELEMENT0 0x180020
3971 /* [RW 3] The source that is associated with arbitration element 1. Source
3972 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3973 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3974 Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */
3975 #define TSEM_REG_ARB_ELEMENT1 0x180024
3976 /* [RW 3] The source that is associated with arbitration element 2. Source
3977 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3978 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3979 Could not be equal to register ~tsem_registers_arb_element0.arb_element0
3980 and ~tsem_registers_arb_element1.arb_element1 */
3981 #define TSEM_REG_ARB_ELEMENT2 0x180028
3982 /* [RW 3] The source that is associated with arbitration element 3. Source
3983 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3984 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
3985 not be equal to register ~tsem_registers_arb_element0.arb_element0 and
3986 ~tsem_registers_arb_element1.arb_element1 and
3987 ~tsem_registers_arb_element2.arb_element2 */
3988 #define TSEM_REG_ARB_ELEMENT3 0x18002c
3989 /* [RW 3] The source that is associated with arbitration element 4. Source
3990 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3991 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3992 Could not be equal to register ~tsem_registers_arb_element0.arb_element0
3993 and ~tsem_registers_arb_element1.arb_element1 and
3994 ~tsem_registers_arb_element2.arb_element2 and
3995 ~tsem_registers_arb_element3.arb_element3 */
3996 #define TSEM_REG_ARB_ELEMENT4 0x180030
3997 #define TSEM_REG_ENABLE_IN 0x1800a4
3998 #define TSEM_REG_ENABLE_OUT 0x1800a8
3999 /* [RW 32] This address space contains all registers and memories that are
4000 placed in SEM_FAST block. The SEM_FAST registers are described in
4001 appendix B. In order to access the sem_fast registers the base address
4002 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
4003 #define TSEM_REG_FAST_MEMORY 0x1a0000
4004 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
4006 #define TSEM_REG_FIC0_DISABLE 0x180224
4007 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
4009 #define TSEM_REG_FIC1_DISABLE 0x180234
4010 /* [RW 15] Interrupt table Read and write access to it is not possible in
4011 the middle of the work */
4012 #define TSEM_REG_INT_TABLE 0x180400
4013 /* [ST 24] Statistics register. The number of messages that entered through
4015 #define TSEM_REG_MSG_NUM_FIC0 0x180000
4016 /* [ST 24] Statistics register. The number of messages that entered through
4018 #define TSEM_REG_MSG_NUM_FIC1 0x180004
4019 /* [ST 24] Statistics register. The number of messages that were sent to
4021 #define TSEM_REG_MSG_NUM_FOC0 0x180008
4022 /* [ST 24] Statistics register. The number of messages that were sent to
4024 #define TSEM_REG_MSG_NUM_FOC1 0x18000c
4025 /* [ST 24] Statistics register. The number of messages that were sent to
4027 #define TSEM_REG_MSG_NUM_FOC2 0x180010
4028 /* [ST 24] Statistics register. The number of messages that were sent to
4030 #define TSEM_REG_MSG_NUM_FOC3 0x180014
4031 /* [RW 1] Disables input messages from the passive buffer May be updated
4032 during run_time by the microcode */
4033 #define TSEM_REG_PAS_DISABLE 0x18024c
4034 /* [WB 128] Debug only. Passive buffer memory */
4035 #define TSEM_REG_PASSIVE_BUFFER 0x181000
4036 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
4037 #define TSEM_REG_PRAM 0x1c0000
4038 /* [R 8] Valid sleeping threads indication have bit per thread */
4039 #define TSEM_REG_SLEEP_THREADS_VALID 0x18026c
4040 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
4041 #define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0
4042 /* [RW 8] List of free threads . There is a bit per thread. */
4043 #define TSEM_REG_THREADS_LIST 0x1802e4
4044 /* [RW 3] The arbitration scheme of time_slot 0 */
4045 #define TSEM_REG_TS_0_AS 0x180038
4046 /* [RW 3] The arbitration scheme of time_slot 10 */
4047 #define TSEM_REG_TS_10_AS 0x180060
4048 /* [RW 3] The arbitration scheme of time_slot 11 */
4049 #define TSEM_REG_TS_11_AS 0x180064
4050 /* [RW 3] The arbitration scheme of time_slot 12 */
4051 #define TSEM_REG_TS_12_AS 0x180068
4052 /* [RW 3] The arbitration scheme of time_slot 13 */
4053 #define TSEM_REG_TS_13_AS 0x18006c
4054 /* [RW 3] The arbitration scheme of time_slot 14 */
4055 #define TSEM_REG_TS_14_AS 0x180070
4056 /* [RW 3] The arbitration scheme of time_slot 15 */
4057 #define TSEM_REG_TS_15_AS 0x180074
4058 /* [RW 3] The arbitration scheme of time_slot 16 */
4059 #define TSEM_REG_TS_16_AS 0x180078
4060 /* [RW 3] The arbitration scheme of time_slot 17 */
4061 #define TSEM_REG_TS_17_AS 0x18007c
4062 /* [RW 3] The arbitration scheme of time_slot 18 */
4063 #define TSEM_REG_TS_18_AS 0x180080
4064 /* [RW 3] The arbitration scheme of time_slot 1 */
4065 #define TSEM_REG_TS_1_AS 0x18003c
4066 /* [RW 3] The arbitration scheme of time_slot 2 */
4067 #define TSEM_REG_TS_2_AS 0x180040
4068 /* [RW 3] The arbitration scheme of time_slot 3 */
4069 #define TSEM_REG_TS_3_AS 0x180044
4070 /* [RW 3] The arbitration scheme of time_slot 4 */
4071 #define TSEM_REG_TS_4_AS 0x180048
4072 /* [RW 3] The arbitration scheme of time_slot 5 */
4073 #define TSEM_REG_TS_5_AS 0x18004c
4074 /* [RW 3] The arbitration scheme of time_slot 6 */
4075 #define TSEM_REG_TS_6_AS 0x180050
4076 /* [RW 3] The arbitration scheme of time_slot 7 */
4077 #define TSEM_REG_TS_7_AS 0x180054
4078 /* [RW 3] The arbitration scheme of time_slot 8 */
4079 #define TSEM_REG_TS_8_AS 0x180058
4080 /* [RW 3] The arbitration scheme of time_slot 9 */
4081 #define TSEM_REG_TS_9_AS 0x18005c
4082 /* [RW 32] Interrupt mask register #0 read/write */
4083 #define TSEM_REG_TSEM_INT_MASK_0 0x180100
4084 #define TSEM_REG_TSEM_INT_MASK_1 0x180110
4085 /* [R 32] Interrupt register #0 read */
4086 #define TSEM_REG_TSEM_INT_STS_0 0x1800f4
4087 #define TSEM_REG_TSEM_INT_STS_1 0x180104
4088 /* [RW 32] Parity mask register #0 read/write */
4089 #define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
4090 #define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
4091 /* [R 32] Parity register #0 read */
4092 #define TSEM_REG_TSEM_PRTY_STS_0 0x180114
4093 #define TSEM_REG_TSEM_PRTY_STS_1 0x180124
4094 /* [R 5] Used to read the XX protection CAM occupancy counter. */
4095 #define UCM_REG_CAM_OCCUP 0xe0170
4096 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
4097 disregarded; valid output is deasserted; all other signals are treated as
4098 usual; if 1 - normal activity. */
4099 #define UCM_REG_CDU_AG_RD_IFEN 0xe0038
4100 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
4101 are disregarded; all other signals are treated as usual; if 1 - normal
4103 #define UCM_REG_CDU_AG_WR_IFEN 0xe0034
4104 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
4105 disregarded; valid output is deasserted; all other signals are treated as
4106 usual; if 1 - normal activity. */
4107 #define UCM_REG_CDU_SM_RD_IFEN 0xe0040
4108 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
4109 input is disregarded; all other signals are treated as usual; if 1 -
4111 #define UCM_REG_CDU_SM_WR_IFEN 0xe003c
4112 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
4113 the initial credit value; read returns the current value of the credit
4114 counter. Must be initialized to 1 at start-up. */
4115 #define UCM_REG_CFC_INIT_CRD 0xe0204
4116 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
4117 weight 8 (the most prioritised); 1 stands for weight 1(least
4118 prioritised); 2 stands for weight 2; tc. */
4119 #define UCM_REG_CP_WEIGHT 0xe00c4
4120 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
4121 disregarded; acknowledge output is deasserted; all other signals are
4122 treated as usual; if 1 - normal activity. */
4123 #define UCM_REG_CSEM_IFEN 0xe0028
4124 /* [RC 1] Set when the message length mismatch (relative to last indication)
4125 at the csem interface is detected. */
4126 #define UCM_REG_CSEM_LENGTH_MIS 0xe0160
4127 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
4128 weight 8 (the most prioritised); 1 stands for weight 1(least
4129 prioritised); 2 stands for weight 2; tc. */
4130 #define UCM_REG_CSEM_WEIGHT 0xe00b8
4131 /* [RW 1] Input dorq Interface enable. If 0 - the valid input is
4132 disregarded; acknowledge output is deasserted; all other signals are
4133 treated as usual; if 1 - normal activity. */
4134 #define UCM_REG_DORQ_IFEN 0xe0030
4135 /* [RC 1] Set when the message length mismatch (relative to last indication)
4136 at the dorq interface is detected. */
4137 #define UCM_REG_DORQ_LENGTH_MIS 0xe0168
4138 /* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
4139 weight 8 (the most prioritised); 1 stands for weight 1(least
4140 prioritised); 2 stands for weight 2; tc. */
4141 #define UCM_REG_DORQ_WEIGHT 0xe00c0
4142 /* [RW 8] The Event ID in case ErrorFlg input message bit is set. */
4143 #define UCM_REG_ERR_EVNT_ID 0xe00a4
4144 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
4145 #define UCM_REG_ERR_UCM_HDR 0xe00a0
4146 /* [RW 8] The Event ID for Timers expiration. */
4147 #define UCM_REG_EXPR_EVNT_ID 0xe00a8
4148 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
4149 writes the initial credit value; read returns the current value of the
4150 credit counter. Must be initialized to 64 at start-up. */
4151 #define UCM_REG_FIC0_INIT_CRD 0xe020c
4152 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
4153 writes the initial credit value; read returns the current value of the
4154 credit counter. Must be initialized to 64 at start-up. */
4155 #define UCM_REG_FIC1_INIT_CRD 0xe0210
4156 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
4157 - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr;
4158 ~ucm_registers_gr_ld0_pr.gr_ld0_pr and
4159 ~ucm_registers_gr_ld1_pr.gr_ld1_pr. */
4160 #define UCM_REG_GR_ARB_TYPE 0xe0144
4161 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
4162 highest priority is 3. It is supposed that the Store channel group is
4163 compliment to the others. */
4164 #define UCM_REG_GR_LD0_PR 0xe014c
4165 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
4166 highest priority is 3. It is supposed that the Store channel group is
4167 compliment to the others. */
4168 #define UCM_REG_GR_LD1_PR 0xe0150
4169 /* [RW 2] The queue index for invalidate counter flag decision. */
4170 #define UCM_REG_INV_CFLG_Q 0xe00e4
4171 /* [RW 5] The number of double REG-pairs; loaded from the STORM context and
4172 sent to STORM; for a specific connection type. the double REG-pairs are
4173 used in order to align to STORM context row size of 128 bits. The offset
4174 of these data in the STORM context is always 0. Index _i stands for the
4175 connection type (one of 16). */
4176 #define UCM_REG_N_SM_CTX_LD_0 0xe0054
4177 #define UCM_REG_N_SM_CTX_LD_1 0xe0058
4178 #define UCM_REG_N_SM_CTX_LD_10 0xe007c
4179 #define UCM_REG_N_SM_CTX_LD_11 0xe0080
4180 #define UCM_REG_N_SM_CTX_LD_12 0xe0084
4181 #define UCM_REG_N_SM_CTX_LD_13 0xe0088
4182 #define UCM_REG_N_SM_CTX_LD_14 0xe008c
4183 #define UCM_REG_N_SM_CTX_LD_15 0xe0090
4184 #define UCM_REG_N_SM_CTX_LD_2 0xe005c
4185 #define UCM_REG_N_SM_CTX_LD_3 0xe0060
4186 #define UCM_REG_N_SM_CTX_LD_4 0xe0064
4187 #define UCM_REG_N_SM_CTX_LD_5 0xe0068
4188 #define UCM_REG_PHYS_QNUM0_0 0xe0110
4189 #define UCM_REG_PHYS_QNUM0_1 0xe0114
4190 #define UCM_REG_PHYS_QNUM1_0 0xe0118
4191 #define UCM_REG_PHYS_QNUM1_1 0xe011c
4192 #define UCM_REG_PHYS_QNUM2_0 0xe0120
4193 #define UCM_REG_PHYS_QNUM2_1 0xe0124
4194 #define UCM_REG_PHYS_QNUM3_0 0xe0128
4195 #define UCM_REG_PHYS_QNUM3_1 0xe012c
4196 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
4197 #define UCM_REG_STOP_EVNT_ID 0xe00ac
4198 /* [RC 1] Set when the message length mismatch (relative to last indication)
4199 at the STORM interface is detected. */
4200 #define UCM_REG_STORM_LENGTH_MIS 0xe0154
4201 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
4202 disregarded; acknowledge output is deasserted; all other signals are
4203 treated as usual; if 1 - normal activity. */
4204 #define UCM_REG_STORM_UCM_IFEN 0xe0010
4205 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
4206 weight 8 (the most prioritised); 1 stands for weight 1(least
4207 prioritised); 2 stands for weight 2; tc. */
4208 #define UCM_REG_STORM_WEIGHT 0xe00b0
4209 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
4210 writes the initial credit value; read returns the current value of the
4211 credit counter. Must be initialized to 4 at start-up. */
4212 #define UCM_REG_TM_INIT_CRD 0xe021c
4213 /* [RW 28] The CM header for Timers expiration command. */
4214 #define UCM_REG_TM_UCM_HDR 0xe009c
4215 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
4216 disregarded; acknowledge output is deasserted; all other signals are
4217 treated as usual; if 1 - normal activity. */
4218 #define UCM_REG_TM_UCM_IFEN 0xe001c
4219 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
4220 weight 8 (the most prioritised); 1 stands for weight 1(least
4221 prioritised); 2 stands for weight 2; tc. */
4222 #define UCM_REG_TM_WEIGHT 0xe00d4
4223 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
4224 disregarded; acknowledge output is deasserted; all other signals are
4225 treated as usual; if 1 - normal activity. */
4226 #define UCM_REG_TSEM_IFEN 0xe0024
4227 /* [RC 1] Set when the message length mismatch (relative to last indication)
4228 at the tsem interface is detected. */
4229 #define UCM_REG_TSEM_LENGTH_MIS 0xe015c
4230 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
4231 weight 8 (the most prioritised); 1 stands for weight 1(least
4232 prioritised); 2 stands for weight 2; tc. */
4233 #define UCM_REG_TSEM_WEIGHT 0xe00b4
4234 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
4235 acknowledge output is deasserted; all other signals are treated as usual;
4236 if 1 - normal activity. */
4237 #define UCM_REG_UCM_CFC_IFEN 0xe0044
4238 /* [RW 11] Interrupt mask register #0 read/write */
4239 #define UCM_REG_UCM_INT_MASK 0xe01d4
4240 /* [R 11] Interrupt register #0 read */
4241 #define UCM_REG_UCM_INT_STS 0xe01c8
4242 /* [R 27] Parity register #0 read */
4243 #define UCM_REG_UCM_PRTY_STS 0xe01d8
4244 /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
4245 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
4246 Is used to determine the number of the AG context REG-pairs written back;
4247 when the Reg1WbFlg isn't set. */
4248 #define UCM_REG_UCM_REG0_SZ 0xe00dc
4249 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
4250 disregarded; valid is deasserted; all other signals are treated as usual;
4251 if 1 - normal activity. */
4252 #define UCM_REG_UCM_STORM0_IFEN 0xe0004
4253 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
4254 disregarded; valid is deasserted; all other signals are treated as usual;
4255 if 1 - normal activity. */
4256 #define UCM_REG_UCM_STORM1_IFEN 0xe0008
4257 /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
4258 disregarded; acknowledge output is deasserted; all other signals are
4259 treated as usual; if 1 - normal activity. */
4260 #define UCM_REG_UCM_TM_IFEN 0xe0020
4261 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
4262 disregarded; valid is deasserted; all other signals are treated as usual;
4263 if 1 - normal activity. */
4264 #define UCM_REG_UCM_UQM_IFEN 0xe000c
4265 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
4266 #define UCM_REG_UCM_UQM_USE_Q 0xe00d8
4267 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
4268 the initial credit value; read returns the current value of the credit
4269 counter. Must be initialized to 32 at start-up. */
4270 #define UCM_REG_UQM_INIT_CRD 0xe0220
4271 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
4272 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4273 prioritised); 2 stands for weight 2; tc. */
4274 #define UCM_REG_UQM_P_WEIGHT 0xe00cc
4275 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
4276 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4277 prioritised); 2 stands for weight 2; tc. */
4278 #define UCM_REG_UQM_S_WEIGHT 0xe00d0
4279 /* [RW 28] The CM header value for QM request (primary). */
4280 #define UCM_REG_UQM_UCM_HDR_P 0xe0094
4281 /* [RW 28] The CM header value for QM request (secondary). */
4282 #define UCM_REG_UQM_UCM_HDR_S 0xe0098
4283 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
4284 acknowledge output is deasserted; all other signals are treated as usual;
4285 if 1 - normal activity. */
4286 #define UCM_REG_UQM_UCM_IFEN 0xe0014
4287 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
4288 acknowledge output is deasserted; all other signals are treated as usual;
4289 if 1 - normal activity. */
4290 #define UCM_REG_USDM_IFEN 0xe0018
4291 /* [RC 1] Set when the message length mismatch (relative to last indication)
4292 at the SDM interface is detected. */
4293 #define UCM_REG_USDM_LENGTH_MIS 0xe0158
4294 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
4295 weight 8 (the most prioritised); 1 stands for weight 1(least
4296 prioritised); 2 stands for weight 2; tc. */
4297 #define UCM_REG_USDM_WEIGHT 0xe00c8
4298 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is
4299 disregarded; acknowledge output is deasserted; all other signals are
4300 treated as usual; if 1 - normal activity. */
4301 #define UCM_REG_XSEM_IFEN 0xe002c
4302 /* [RC 1] Set when the message length mismatch (relative to last indication)
4303 at the xsem interface isdetected. */
4304 #define UCM_REG_XSEM_LENGTH_MIS 0xe0164
4305 /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
4306 weight 8 (the most prioritised); 1 stands for weight 1(least
4307 prioritised); 2 stands for weight 2; tc. */
4308 #define UCM_REG_XSEM_WEIGHT 0xe00bc
4309 /* [RW 20] Indirect access to the descriptor table of the XX protection
4310 mechanism. The fields are:[5:0] - message length; 14:6] - message
4311 pointer; 19:15] - next pointer. */
4312 #define UCM_REG_XX_DESCR_TABLE 0xe0280
4313 #define UCM_REG_XX_DESCR_TABLE_SIZE 32
4314 /* [R 6] Use to read the XX protection Free counter. */
4315 #define UCM_REG_XX_FREE 0xe016c
4316 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
4317 of the Input Stage XX protection buffer by the XX protection pending
4318 messages. Write writes the initial credit value; read returns the current
4319 value of the credit counter. Must be initialized to 12 at start-up. */
4320 #define UCM_REG_XX_INIT_CRD 0xe0224
4321 /* [RW 6] The maximum number of pending messages; which may be stored in XX
4322 protection. ~ucm_registers_xx_free.xx_free read on read. */
4323 #define UCM_REG_XX_MSG_NUM 0xe0228
4324 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
4325 #define UCM_REG_XX_OVFL_EVNT_ID 0xe004c
4326 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
4327 The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
4329 #define UCM_REG_XX_TABLE 0xe0300
4330 /* [RW 8] The event id for aggregated interrupt 0 */
4331 #define USDM_REG_AGG_INT_EVENT_0 0xc4038
4332 #define USDM_REG_AGG_INT_EVENT_1 0xc403c
4333 #define USDM_REG_AGG_INT_EVENT_10 0xc4060
4334 #define USDM_REG_AGG_INT_EVENT_11 0xc4064
4335 #define USDM_REG_AGG_INT_EVENT_12 0xc4068
4336 #define USDM_REG_AGG_INT_EVENT_13 0xc406c
4337 #define USDM_REG_AGG_INT_EVENT_14 0xc4070
4338 #define USDM_REG_AGG_INT_EVENT_15 0xc4074
4339 #define USDM_REG_AGG_INT_EVENT_16 0xc4078
4340 #define USDM_REG_AGG_INT_EVENT_17 0xc407c
4341 #define USDM_REG_AGG_INT_EVENT_18 0xc4080
4342 #define USDM_REG_AGG_INT_EVENT_19 0xc4084
4343 #define USDM_REG_AGG_INT_EVENT_2 0xc4040
4344 #define USDM_REG_AGG_INT_EVENT_20 0xc4088
4345 #define USDM_REG_AGG_INT_EVENT_21 0xc408c
4346 #define USDM_REG_AGG_INT_EVENT_22 0xc4090
4347 #define USDM_REG_AGG_INT_EVENT_23 0xc4094
4348 #define USDM_REG_AGG_INT_EVENT_24 0xc4098
4349 #define USDM_REG_AGG_INT_EVENT_25 0xc409c
4350 #define USDM_REG_AGG_INT_EVENT_26 0xc40a0
4351 #define USDM_REG_AGG_INT_EVENT_27 0xc40a4
4352 #define USDM_REG_AGG_INT_EVENT_28 0xc40a8
4353 #define USDM_REG_AGG_INT_EVENT_29 0xc40ac
4354 #define USDM_REG_AGG_INT_EVENT_3 0xc4044
4355 #define USDM_REG_AGG_INT_EVENT_30 0xc40b0
4356 #define USDM_REG_AGG_INT_EVENT_31 0xc40b4
4357 #define USDM_REG_AGG_INT_EVENT_4 0xc4048
4358 #define USDM_REG_AGG_INT_EVENT_5 0xc404c
4359 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
4360 or auto-mask-mode (1) */
4361 #define USDM_REG_AGG_INT_MODE_0 0xc41b8
4362 #define USDM_REG_AGG_INT_MODE_1 0xc41bc
4363 #define USDM_REG_AGG_INT_MODE_10 0xc41e0
4364 #define USDM_REG_AGG_INT_MODE_11 0xc41e4
4365 #define USDM_REG_AGG_INT_MODE_12 0xc41e8
4366 #define USDM_REG_AGG_INT_MODE_13 0xc41ec
4367 #define USDM_REG_AGG_INT_MODE_14 0xc41f0
4368 #define USDM_REG_AGG_INT_MODE_15 0xc41f4
4369 #define USDM_REG_AGG_INT_MODE_16 0xc41f8
4370 #define USDM_REG_AGG_INT_MODE_17 0xc41fc
4371 #define USDM_REG_AGG_INT_MODE_18 0xc4200
4372 #define USDM_REG_AGG_INT_MODE_19 0xc4204
4373 #define USDM_REG_AGG_INT_MODE_4 0xc41c8
4374 #define USDM_REG_AGG_INT_MODE_5 0xc41cc
4375 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
4376 #define USDM_REG_CFC_RSP_START_ADDR 0xc4008
4377 /* [RW 16] The maximum value of the competion counter #0 */
4378 #define USDM_REG_CMP_COUNTER_MAX0 0xc401c
4379 /* [RW 16] The maximum value of the competion counter #1 */
4380 #define USDM_REG_CMP_COUNTER_MAX1 0xc4020
4381 /* [RW 16] The maximum value of the competion counter #2 */
4382 #define USDM_REG_CMP_COUNTER_MAX2 0xc4024
4383 /* [RW 16] The maximum value of the competion counter #3 */
4384 #define USDM_REG_CMP_COUNTER_MAX3 0xc4028
4385 /* [RW 13] The start address in the internal RAM for the completion
4387 #define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c
4388 #define USDM_REG_ENABLE_IN1 0xc4238
4389 #define USDM_REG_ENABLE_IN2 0xc423c
4390 #define USDM_REG_ENABLE_OUT1 0xc4240
4391 #define USDM_REG_ENABLE_OUT2 0xc4244
4392 /* [RW 4] The initial number of messages that can be sent to the pxp control
4393 interface without receiving any ACK. */
4394 #define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0
4395 /* [ST 32] The number of ACK after placement messages received */
4396 #define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280
4397 /* [ST 32] The number of packet end messages received from the parser */
4398 #define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278
4399 /* [ST 32] The number of requests received from the pxp async if */
4400 #define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c
4401 /* [ST 32] The number of commands received in queue 0 */
4402 #define USDM_REG_NUM_OF_Q0_CMD 0xc4248
4403 /* [ST 32] The number of commands received in queue 10 */
4404 #define USDM_REG_NUM_OF_Q10_CMD 0xc4270
4405 /* [ST 32] The number of commands received in queue 11 */
4406 #define USDM_REG_NUM_OF_Q11_CMD 0xc4274
4407 /* [ST 32] The number of commands received in queue 1 */
4408 #define USDM_REG_NUM_OF_Q1_CMD 0xc424c
4409 /* [ST 32] The number of commands received in queue 2 */
4410 #define USDM_REG_NUM_OF_Q2_CMD 0xc4250
4411 /* [ST 32] The number of commands received in queue 3 */
4412 #define USDM_REG_NUM_OF_Q3_CMD 0xc4254
4413 /* [ST 32] The number of commands received in queue 4 */
4414 #define USDM_REG_NUM_OF_Q4_CMD 0xc4258
4415 /* [ST 32] The number of commands received in queue 5 */
4416 #define USDM_REG_NUM_OF_Q5_CMD 0xc425c
4417 /* [ST 32] The number of commands received in queue 6 */
4418 #define USDM_REG_NUM_OF_Q6_CMD 0xc4260
4419 /* [ST 32] The number of commands received in queue 7 */
4420 #define USDM_REG_NUM_OF_Q7_CMD 0xc4264
4421 /* [ST 32] The number of commands received in queue 8 */
4422 #define USDM_REG_NUM_OF_Q8_CMD 0xc4268
4423 /* [ST 32] The number of commands received in queue 9 */
4424 #define USDM_REG_NUM_OF_Q9_CMD 0xc426c
4425 /* [RW 13] The start address in the internal RAM for the packet end message */
4426 #define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014
4427 /* [RW 13] The start address in the internal RAM for queue counters */
4428 #define USDM_REG_Q_COUNTER_START_ADDR 0xc4010
4429 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
4430 #define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550
4431 /* [R 1] parser fifo empty in sdm_sync block */
4432 #define USDM_REG_SYNC_PARSER_EMPTY 0xc4558
4433 /* [R 1] parser serial fifo empty in sdm_sync block */
4434 #define USDM_REG_SYNC_SYNC_EMPTY 0xc4560
4435 /* [RW 32] Tick for timer counter. Applicable only when
4436 ~usdm_registers_timer_tick_enable.timer_tick_enable =1 */
4437 #define USDM_REG_TIMER_TICK 0xc4000
4438 /* [RW 32] Interrupt mask register #0 read/write */
4439 #define USDM_REG_USDM_INT_MASK_0 0xc42a0
4440 #define USDM_REG_USDM_INT_MASK_1 0xc42b0
4441 /* [R 32] Interrupt register #0 read */
4442 #define USDM_REG_USDM_INT_STS_0 0xc4294
4443 #define USDM_REG_USDM_INT_STS_1 0xc42a4
4444 /* [RW 11] Parity mask register #0 read/write */
4445 #define USDM_REG_USDM_PRTY_MASK 0xc42c0
4446 /* [R 11] Parity register #0 read */
4447 #define USDM_REG_USDM_PRTY_STS 0xc42b4
4448 /* [RW 5] The number of time_slots in the arbitration cycle */
4449 #define USEM_REG_ARB_CYCLE_SIZE 0x300034
4450 /* [RW 3] The source that is associated with arbitration element 0. Source
4451 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4452 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
4453 #define USEM_REG_ARB_ELEMENT0 0x300020
4454 /* [RW 3] The source that is associated with arbitration element 1. Source
4455 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4456 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4457 Could not be equal to register ~usem_registers_arb_element0.arb_element0 */
4458 #define USEM_REG_ARB_ELEMENT1 0x300024
4459 /* [RW 3] The source that is associated with arbitration element 2. Source
4460 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4461 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4462 Could not be equal to register ~usem_registers_arb_element0.arb_element0
4463 and ~usem_registers_arb_element1.arb_element1 */
4464 #define USEM_REG_ARB_ELEMENT2 0x300028
4465 /* [RW 3] The source that is associated with arbitration element 3. Source
4466 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4467 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
4468 not be equal to register ~usem_registers_arb_element0.arb_element0 and
4469 ~usem_registers_arb_element1.arb_element1 and
4470 ~usem_registers_arb_element2.arb_element2 */
4471 #define USEM_REG_ARB_ELEMENT3 0x30002c
4472 /* [RW 3] The source that is associated with arbitration element 4. Source
4473 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4474 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4475 Could not be equal to register ~usem_registers_arb_element0.arb_element0
4476 and ~usem_registers_arb_element1.arb_element1 and
4477 ~usem_registers_arb_element2.arb_element2 and
4478 ~usem_registers_arb_element3.arb_element3 */
4479 #define USEM_REG_ARB_ELEMENT4 0x300030
4480 #define USEM_REG_ENABLE_IN 0x3000a4
4481 #define USEM_REG_ENABLE_OUT 0x3000a8
4482 /* [RW 32] This address space contains all registers and memories that are
4483 placed in SEM_FAST block. The SEM_FAST registers are described in
4484 appendix B. In order to access the sem_fast registers the base address
4485 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
4486 #define USEM_REG_FAST_MEMORY 0x320000
4487 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
4489 #define USEM_REG_FIC0_DISABLE 0x300224
4490 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
4492 #define USEM_REG_FIC1_DISABLE 0x300234
4493 /* [RW 15] Interrupt table Read and write access to it is not possible in
4494 the middle of the work */
4495 #define USEM_REG_INT_TABLE 0x300400
4496 /* [ST 24] Statistics register. The number of messages that entered through
4498 #define USEM_REG_MSG_NUM_FIC0 0x300000
4499 /* [ST 24] Statistics register. The number of messages that entered through
4501 #define USEM_REG_MSG_NUM_FIC1 0x300004
4502 /* [ST 24] Statistics register. The number of messages that were sent to
4504 #define USEM_REG_MSG_NUM_FOC0 0x300008
4505 /* [ST 24] Statistics register. The number of messages that were sent to
4507 #define USEM_REG_MSG_NUM_FOC1 0x30000c
4508 /* [ST 24] Statistics register. The number of messages that were sent to
4510 #define USEM_REG_MSG_NUM_FOC2 0x300010
4511 /* [ST 24] Statistics register. The number of messages that were sent to
4513 #define USEM_REG_MSG_NUM_FOC3 0x300014
4514 /* [RW 1] Disables input messages from the passive buffer May be updated
4515 during run_time by the microcode */
4516 #define USEM_REG_PAS_DISABLE 0x30024c
4517 /* [WB 128] Debug only. Passive buffer memory */
4518 #define USEM_REG_PASSIVE_BUFFER 0x302000
4519 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
4520 #define USEM_REG_PRAM 0x340000
4521 /* [R 16] Valid sleeping threads indication have bit per thread */
4522 #define USEM_REG_SLEEP_THREADS_VALID 0x30026c
4523 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
4524 #define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0
4525 /* [RW 16] List of free threads . There is a bit per thread. */
4526 #define USEM_REG_THREADS_LIST 0x3002e4
4527 /* [RW 3] The arbitration scheme of time_slot 0 */
4528 #define USEM_REG_TS_0_AS 0x300038
4529 /* [RW 3] The arbitration scheme of time_slot 10 */
4530 #define USEM_REG_TS_10_AS 0x300060
4531 /* [RW 3] The arbitration scheme of time_slot 11 */
4532 #define USEM_REG_TS_11_AS 0x300064
4533 /* [RW 3] The arbitration scheme of time_slot 12 */
4534 #define USEM_REG_TS_12_AS 0x300068
4535 /* [RW 3] The arbitration scheme of time_slot 13 */
4536 #define USEM_REG_TS_13_AS 0x30006c
4537 /* [RW 3] The arbitration scheme of time_slot 14 */
4538 #define USEM_REG_TS_14_AS 0x300070
4539 /* [RW 3] The arbitration scheme of time_slot 15 */
4540 #define USEM_REG_TS_15_AS 0x300074
4541 /* [RW 3] The arbitration scheme of time_slot 16 */
4542 #define USEM_REG_TS_16_AS 0x300078
4543 /* [RW 3] The arbitration scheme of time_slot 17 */
4544 #define USEM_REG_TS_17_AS 0x30007c
4545 /* [RW 3] The arbitration scheme of time_slot 18 */
4546 #define USEM_REG_TS_18_AS 0x300080
4547 /* [RW 3] The arbitration scheme of time_slot 1 */
4548 #define USEM_REG_TS_1_AS 0x30003c
4549 /* [RW 3] The arbitration scheme of time_slot 2 */
4550 #define USEM_REG_TS_2_AS 0x300040
4551 /* [RW 3] The arbitration scheme of time_slot 3 */
4552 #define USEM_REG_TS_3_AS 0x300044
4553 /* [RW 3] The arbitration scheme of time_slot 4 */
4554 #define USEM_REG_TS_4_AS 0x300048
4555 /* [RW 3] The arbitration scheme of time_slot 5 */
4556 #define USEM_REG_TS_5_AS 0x30004c
4557 /* [RW 3] The arbitration scheme of time_slot 6 */
4558 #define USEM_REG_TS_6_AS 0x300050
4559 /* [RW 3] The arbitration scheme of time_slot 7 */
4560 #define USEM_REG_TS_7_AS 0x300054
4561 /* [RW 3] The arbitration scheme of time_slot 8 */
4562 #define USEM_REG_TS_8_AS 0x300058
4563 /* [RW 3] The arbitration scheme of time_slot 9 */
4564 #define USEM_REG_TS_9_AS 0x30005c
4565 /* [RW 32] Interrupt mask register #0 read/write */
4566 #define USEM_REG_USEM_INT_MASK_0 0x300110
4567 #define USEM_REG_USEM_INT_MASK_1 0x300120
4568 /* [R 32] Interrupt register #0 read */
4569 #define USEM_REG_USEM_INT_STS_0 0x300104
4570 #define USEM_REG_USEM_INT_STS_1 0x300114
4571 /* [RW 32] Parity mask register #0 read/write */
4572 #define USEM_REG_USEM_PRTY_MASK_0 0x300130
4573 #define USEM_REG_USEM_PRTY_MASK_1 0x300140
4574 /* [R 32] Parity register #0 read */
4575 #define USEM_REG_USEM_PRTY_STS_0 0x300124
4576 #define USEM_REG_USEM_PRTY_STS_1 0x300134
4577 /* [RW 2] The queue index for registration on Aux1 counter flag. */
4578 #define XCM_REG_AUX1_Q 0x20134
4579 /* [RW 2] Per each decision rule the queue index to register to. */
4580 #define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0
4581 /* [R 5] Used to read the XX protection CAM occupancy counter. */
4582 #define XCM_REG_CAM_OCCUP 0x20244
4583 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
4584 disregarded; valid output is deasserted; all other signals are treated as
4585 usual; if 1 - normal activity. */
4586 #define XCM_REG_CDU_AG_RD_IFEN 0x20044
4587 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
4588 are disregarded; all other signals are treated as usual; if 1 - normal
4590 #define XCM_REG_CDU_AG_WR_IFEN 0x20040
4591 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
4592 disregarded; valid output is deasserted; all other signals are treated as
4593 usual; if 1 - normal activity. */
4594 #define XCM_REG_CDU_SM_RD_IFEN 0x2004c
4595 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
4596 input is disregarded; all other signals are treated as usual; if 1 -
4598 #define XCM_REG_CDU_SM_WR_IFEN 0x20048
4599 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
4600 the initial credit value; read returns the current value of the credit
4601 counter. Must be initialized to 1 at start-up. */
4602 #define XCM_REG_CFC_INIT_CRD 0x20404
4603 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
4604 weight 8 (the most prioritised); 1 stands for weight 1(least
4605 prioritised); 2 stands for weight 2; tc. */
4606 #define XCM_REG_CP_WEIGHT 0x200dc
4607 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
4608 disregarded; acknowledge output is deasserted; all other signals are
4609 treated as usual; if 1 - normal activity. */
4610 #define XCM_REG_CSEM_IFEN 0x20028
4611 /* [RC 1] Set at message length mismatch (relative to last indication) at
4612 the csem interface. */
4613 #define XCM_REG_CSEM_LENGTH_MIS 0x20228
4614 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
4615 weight 8 (the most prioritised); 1 stands for weight 1(least
4616 prioritised); 2 stands for weight 2; tc. */
4617 #define XCM_REG_CSEM_WEIGHT 0x200c4
4618 /* [RW 1] Input dorq Interface enable. If 0 - the valid input is
4619 disregarded; acknowledge output is deasserted; all other signals are
4620 treated as usual; if 1 - normal activity. */
4621 #define XCM_REG_DORQ_IFEN 0x20030
4622 /* [RC 1] Set at message length mismatch (relative to last indication) at
4623 the dorq interface. */
4624 #define XCM_REG_DORQ_LENGTH_MIS 0x20230
4625 /* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
4626 weight 8 (the most prioritised); 1 stands for weight 1(least
4627 prioritised); 2 stands for weight 2; tc. */
4628 #define XCM_REG_DORQ_WEIGHT 0x200cc
4629 /* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */
4630 #define XCM_REG_ERR_EVNT_ID 0x200b0
4631 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
4632 #define XCM_REG_ERR_XCM_HDR 0x200ac
4633 /* [RW 8] The Event ID for Timers expiration. */
4634 #define XCM_REG_EXPR_EVNT_ID 0x200b4
4635 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
4636 writes the initial credit value; read returns the current value of the
4637 credit counter. Must be initialized to 64 at start-up. */
4638 #define XCM_REG_FIC0_INIT_CRD 0x2040c
4639 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
4640 writes the initial credit value; read returns the current value of the
4641 credit counter. Must be initialized to 64 at start-up. */
4642 #define XCM_REG_FIC1_INIT_CRD 0x20410
4643 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118
4644 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c
4645 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108
4646 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c
4647 /* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1
4648 - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr;
4649 ~xcm_registers_gr_ld0_pr.gr_ld0_pr and
4650 ~xcm_registers_gr_ld1_pr.gr_ld1_pr. */
4651 #define XCM_REG_GR_ARB_TYPE 0x2020c
4652 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
4653 highest priority is 3. It is supposed that the Channel group is the
4654 compliment of the other 3 groups. */
4655 #define XCM_REG_GR_LD0_PR 0x20214
4656 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
4657 highest priority is 3. It is supposed that the Channel group is the
4658 compliment of the other 3 groups. */
4659 #define XCM_REG_GR_LD1_PR 0x20218
4660 /* [RW 1] Input nig0 Interface enable. If 0 - the valid input is
4661 disregarded; acknowledge output is deasserted; all other signals are
4662 treated as usual; if 1 - normal activity. */
4663 #define XCM_REG_NIG0_IFEN 0x20038
4664 /* [RC 1] Set at message length mismatch (relative to last indication) at
4665 the nig0 interface. */
4666 #define XCM_REG_NIG0_LENGTH_MIS 0x20238
4667 /* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands for
4668 weight 8 (the most prioritised); 1 stands for weight 1(least
4669 prioritised); 2 stands for weight 2; tc. */
4670 #define XCM_REG_NIG0_WEIGHT 0x200d4
4671 /* [RW 1] Input nig1 Interface enable. If 0 - the valid input is
4672 disregarded; acknowledge output is deasserted; all other signals are
4673 treated as usual; if 1 - normal activity. */
4674 #define XCM_REG_NIG1_IFEN 0x2003c
4675 /* [RC 1] Set at message length mismatch (relative to last indication) at
4676 the nig1 interface. */
4677 #define XCM_REG_NIG1_LENGTH_MIS 0x2023c
4678 /* [RW 3] The weight of the input nig1 in the WRR mechanism. 0 stands for
4679 weight 8 (the most prioritised); 1 stands for weight 1(least
4680 prioritised); 2 stands for weight 2; tc. */
4681 #define XCM_REG_NIG1_WEIGHT 0x200d8
4682 /* [RW 5] The number of double REG-pairs; loaded from the STORM context and
4683 sent to STORM; for a specific connection type. The double REG-pairs are
4684 used in order to align to STORM context row size of 128 bits. The offset
4685 of these data in the STORM context is always 0. Index _i stands for the
4686 connection type (one of 16). */
4687 #define XCM_REG_N_SM_CTX_LD_0 0x20060
4688 #define XCM_REG_N_SM_CTX_LD_1 0x20064
4689 #define XCM_REG_N_SM_CTX_LD_10 0x20088
4690 #define XCM_REG_N_SM_CTX_LD_11 0x2008c
4691 #define XCM_REG_N_SM_CTX_LD_12 0x20090
4692 #define XCM_REG_N_SM_CTX_LD_13 0x20094
4693 #define XCM_REG_N_SM_CTX_LD_14 0x20098
4694 #define XCM_REG_N_SM_CTX_LD_15 0x2009c
4695 #define XCM_REG_N_SM_CTX_LD_2 0x20068
4696 #define XCM_REG_N_SM_CTX_LD_3 0x2006c
4697 #define XCM_REG_N_SM_CTX_LD_4 0x20070
4698 #define XCM_REG_N_SM_CTX_LD_5 0x20074
4699 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
4700 acknowledge output is deasserted; all other signals are treated as usual;
4701 if 1 - normal activity. */
4702 #define XCM_REG_PBF_IFEN 0x20034
4703 /* [RC 1] Set at message length mismatch (relative to last indication) at
4704 the pbf interface. */
4705 #define XCM_REG_PBF_LENGTH_MIS 0x20234
4706 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
4707 weight 8 (the most prioritised); 1 stands for weight 1(least
4708 prioritised); 2 stands for weight 2; tc. */
4709 #define XCM_REG_PBF_WEIGHT 0x200d0
4710 #define XCM_REG_PHYS_QNUM3_0 0x20100
4711 #define XCM_REG_PHYS_QNUM3_1 0x20104
4712 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
4713 #define XCM_REG_STOP_EVNT_ID 0x200b8
4714 /* [RC 1] Set at message length mismatch (relative to last indication) at
4715 the STORM interface. */
4716 #define XCM_REG_STORM_LENGTH_MIS 0x2021c
4717 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
4718 weight 8 (the most prioritised); 1 stands for weight 1(least
4719 prioritised); 2 stands for weight 2; tc. */
4720 #define XCM_REG_STORM_WEIGHT 0x200bc
4721 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
4722 disregarded; acknowledge output is deasserted; all other signals are
4723 treated as usual; if 1 - normal activity. */
4724 #define XCM_REG_STORM_XCM_IFEN 0x20010
4725 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
4726 writes the initial credit value; read returns the current value of the
4727 credit counter. Must be initialized to 4 at start-up. */
4728 #define XCM_REG_TM_INIT_CRD 0x2041c
4729 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
4730 weight 8 (the most prioritised); 1 stands for weight 1(least
4731 prioritised); 2 stands for weight 2; tc. */
4732 #define XCM_REG_TM_WEIGHT 0x200ec
4733 /* [RW 28] The CM header for Timers expiration command. */
4734 #define XCM_REG_TM_XCM_HDR 0x200a8
4735 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
4736 disregarded; acknowledge output is deasserted; all other signals are
4737 treated as usual; if 1 - normal activity. */
4738 #define XCM_REG_TM_XCM_IFEN 0x2001c
4739 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
4740 disregarded; acknowledge output is deasserted; all other signals are
4741 treated as usual; if 1 - normal activity. */
4742 #define XCM_REG_TSEM_IFEN 0x20024
4743 /* [RC 1] Set at message length mismatch (relative to last indication) at
4744 the tsem interface. */
4745 #define XCM_REG_TSEM_LENGTH_MIS 0x20224
4746 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
4747 weight 8 (the most prioritised); 1 stands for weight 1(least
4748 prioritised); 2 stands for weight 2; tc. */
4749 #define XCM_REG_TSEM_WEIGHT 0x200c0
4750 /* [RW 2] The queue index for registration on UNA greater NXT decision rule. */
4751 #define XCM_REG_UNA_GT_NXT_Q 0x20120
4752 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
4753 disregarded; acknowledge output is deasserted; all other signals are
4754 treated as usual; if 1 - normal activity. */
4755 #define XCM_REG_USEM_IFEN 0x2002c
4756 /* [RC 1] Message length mismatch (relative to last indication) at the usem
4758 #define XCM_REG_USEM_LENGTH_MIS 0x2022c
4759 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
4760 weight 8 (the most prioritised); 1 stands for weight 1(least
4761 prioritised); 2 stands for weight 2; tc. */
4762 #define XCM_REG_USEM_WEIGHT 0x200c8
4763 #define XCM_REG_WU_DA_CNT_CMD00 0x201d4
4764 #define XCM_REG_WU_DA_CNT_CMD01 0x201d8
4765 #define XCM_REG_WU_DA_CNT_CMD10 0x201dc
4766 #define XCM_REG_WU_DA_CNT_CMD11 0x201e0
4767 #define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4
4768 #define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8
4769 #define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec
4770 #define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0
4771 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4
4772 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8
4773 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc
4774 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0
4775 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
4776 acknowledge output is deasserted; all other signals are treated as usual;
4777 if 1 - normal activity. */
4778 #define XCM_REG_XCM_CFC_IFEN 0x20050
4779 /* [RW 14] Interrupt mask register #0 read/write */
4780 #define XCM_REG_XCM_INT_MASK 0x202b4
4781 /* [R 14] Interrupt register #0 read */
4782 #define XCM_REG_XCM_INT_STS 0x202a8
4783 /* [R 30] Parity register #0 read */
4784 #define XCM_REG_XCM_PRTY_STS 0x202b8
4785 /* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS
4786 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
4787 Is used to determine the number of the AG context REG-pairs written back;
4788 when the Reg1WbFlg isn't set. */
4789 #define XCM_REG_XCM_REG0_SZ 0x200f4
4790 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
4791 disregarded; valid is deasserted; all other signals are treated as usual;
4792 if 1 - normal activity. */
4793 #define XCM_REG_XCM_STORM0_IFEN 0x20004
4794 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
4795 disregarded; valid is deasserted; all other signals are treated as usual;
4796 if 1 - normal activity. */
4797 #define XCM_REG_XCM_STORM1_IFEN 0x20008
4798 /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
4799 disregarded; acknowledge output is deasserted; all other signals are
4800 treated as usual; if 1 - normal activity. */
4801 #define XCM_REG_XCM_TM_IFEN 0x20020
4802 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
4803 disregarded; valid is deasserted; all other signals are treated as usual;
4804 if 1 - normal activity. */
4805 #define XCM_REG_XCM_XQM_IFEN 0x2000c
4806 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
4807 #define XCM_REG_XCM_XQM_USE_Q 0x200f0
4808 /* [RW 4] The value by which CFC updates the activity counter at QM bypass. */
4809 #define XCM_REG_XQM_BYP_ACT_UPD 0x200fc
4810 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
4811 the initial credit value; read returns the current value of the credit
4812 counter. Must be initialized to 32 at start-up. */
4813 #define XCM_REG_XQM_INIT_CRD 0x20420
4814 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
4815 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4816 prioritised); 2 stands for weight 2; tc. */
4817 #define XCM_REG_XQM_P_WEIGHT 0x200e4
4818 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
4819 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4820 prioritised); 2 stands for weight 2; tc. */
4821 #define XCM_REG_XQM_S_WEIGHT 0x200e8
4822 /* [RW 28] The CM header value for QM request (primary). */
4823 #define XCM_REG_XQM_XCM_HDR_P 0x200a0
4824 /* [RW 28] The CM header value for QM request (secondary). */
4825 #define XCM_REG_XQM_XCM_HDR_S 0x200a4
4826 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
4827 acknowledge output is deasserted; all other signals are treated as usual;
4828 if 1 - normal activity. */
4829 #define XCM_REG_XQM_XCM_IFEN 0x20014
4830 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
4831 acknowledge output is deasserted; all other signals are treated as usual;
4832 if 1 - normal activity. */
4833 #define XCM_REG_XSDM_IFEN 0x20018
4834 /* [RC 1] Set at message length mismatch (relative to last indication) at
4835 the SDM interface. */
4836 #define XCM_REG_XSDM_LENGTH_MIS 0x20220
4837 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
4838 weight 8 (the most prioritised); 1 stands for weight 1(least
4839 prioritised); 2 stands for weight 2; tc. */
4840 #define XCM_REG_XSDM_WEIGHT 0x200e0
4841 /* [RW 17] Indirect access to the descriptor table of the XX protection
4842 mechanism. The fields are: [5:0] - message length; 11:6] - message
4843 pointer; 16:12] - next pointer. */
4844 #define XCM_REG_XX_DESCR_TABLE 0x20480
4845 #define XCM_REG_XX_DESCR_TABLE_SIZE 32
4846 /* [R 6] Used to read the XX protection Free counter. */
4847 #define XCM_REG_XX_FREE 0x20240
4848 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
4849 of the Input Stage XX protection buffer by the XX protection pending
4850 messages. Max credit available - 3.Write writes the initial credit value;
4851 read returns the current value of the credit counter. Must be initialized
4852 to 2 at start-up. */
4853 #define XCM_REG_XX_INIT_CRD 0x20424
4854 /* [RW 6] The maximum number of pending messages; which may be stored in XX
4855 protection. ~xcm_registers_xx_free.xx_free read on read. */
4856 #define XCM_REG_XX_MSG_NUM 0x20428
4857 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
4858 #define XCM_REG_XX_OVFL_EVNT_ID 0x20058
4859 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
4860 The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] -
4862 #define XCM_REG_XX_TABLE 0x20500
4863 /* [RW 8] The event id for aggregated interrupt 0 */
4864 #define XSDM_REG_AGG_INT_EVENT_0 0x166038
4865 #define XSDM_REG_AGG_INT_EVENT_1 0x16603c
4866 #define XSDM_REG_AGG_INT_EVENT_10 0x166060
4867 #define XSDM_REG_AGG_INT_EVENT_11 0x166064
4868 #define XSDM_REG_AGG_INT_EVENT_12 0x166068
4869 #define XSDM_REG_AGG_INT_EVENT_13 0x16606c
4870 #define XSDM_REG_AGG_INT_EVENT_14 0x166070
4871 #define XSDM_REG_AGG_INT_EVENT_15 0x166074
4872 #define XSDM_REG_AGG_INT_EVENT_16 0x166078
4873 #define XSDM_REG_AGG_INT_EVENT_17 0x16607c
4874 #define XSDM_REG_AGG_INT_EVENT_18 0x166080
4875 #define XSDM_REG_AGG_INT_EVENT_19 0x166084
4876 #define XSDM_REG_AGG_INT_EVENT_10 0x166060
4877 #define XSDM_REG_AGG_INT_EVENT_11 0x166064
4878 #define XSDM_REG_AGG_INT_EVENT_12 0x166068
4879 #define XSDM_REG_AGG_INT_EVENT_13 0x16606c
4880 #define XSDM_REG_AGG_INT_EVENT_14 0x166070
4881 #define XSDM_REG_AGG_INT_EVENT_2 0x166040
4882 #define XSDM_REG_AGG_INT_EVENT_20 0x166088
4883 #define XSDM_REG_AGG_INT_EVENT_21 0x16608c
4884 #define XSDM_REG_AGG_INT_EVENT_22 0x166090
4885 #define XSDM_REG_AGG_INT_EVENT_23 0x166094
4886 #define XSDM_REG_AGG_INT_EVENT_24 0x166098
4887 #define XSDM_REG_AGG_INT_EVENT_25 0x16609c
4888 #define XSDM_REG_AGG_INT_EVENT_26 0x1660a0
4889 #define XSDM_REG_AGG_INT_EVENT_27 0x1660a4
4890 #define XSDM_REG_AGG_INT_EVENT_28 0x1660a8
4891 #define XSDM_REG_AGG_INT_EVENT_29 0x1660ac
4892 #define XSDM_REG_AGG_INT_EVENT_3 0x166044
4893 #define XSDM_REG_AGG_INT_EVENT_30 0x1660b0
4894 #define XSDM_REG_AGG_INT_EVENT_31 0x1660b4
4895 #define XSDM_REG_AGG_INT_EVENT_4 0x166048
4896 #define XSDM_REG_AGG_INT_EVENT_5 0x16604c
4897 #define XSDM_REG_AGG_INT_EVENT_6 0x166050
4898 #define XSDM_REG_AGG_INT_EVENT_7 0x166054
4899 #define XSDM_REG_AGG_INT_EVENT_8 0x166058
4900 #define XSDM_REG_AGG_INT_EVENT_9 0x16605c
4901 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
4902 or auto-mask-mode (1) */
4903 #define XSDM_REG_AGG_INT_MODE_0 0x1661b8
4904 #define XSDM_REG_AGG_INT_MODE_1 0x1661bc
4905 #define XSDM_REG_AGG_INT_MODE_10 0x1661e0
4906 #define XSDM_REG_AGG_INT_MODE_11 0x1661e4
4907 #define XSDM_REG_AGG_INT_MODE_12 0x1661e8
4908 #define XSDM_REG_AGG_INT_MODE_13 0x1661ec
4909 #define XSDM_REG_AGG_INT_MODE_14 0x1661f0
4910 #define XSDM_REG_AGG_INT_MODE_15 0x1661f4
4911 #define XSDM_REG_AGG_INT_MODE_16 0x1661f8
4912 #define XSDM_REG_AGG_INT_MODE_17 0x1661fc
4913 #define XSDM_REG_AGG_INT_MODE_18 0x166200
4914 #define XSDM_REG_AGG_INT_MODE_19 0x166204
4915 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
4916 #define XSDM_REG_CFC_RSP_START_ADDR 0x166008
4917 /* [RW 16] The maximum value of the competion counter #0 */
4918 #define XSDM_REG_CMP_COUNTER_MAX0 0x16601c
4919 /* [RW 16] The maximum value of the competion counter #1 */
4920 #define XSDM_REG_CMP_COUNTER_MAX1 0x166020
4921 /* [RW 16] The maximum value of the competion counter #2 */
4922 #define XSDM_REG_CMP_COUNTER_MAX2 0x166024
4923 /* [RW 16] The maximum value of the competion counter #3 */
4924 #define XSDM_REG_CMP_COUNTER_MAX3 0x166028
4925 /* [RW 13] The start address in the internal RAM for the completion
4927 #define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c
4928 #define XSDM_REG_ENABLE_IN1 0x166238
4929 #define XSDM_REG_ENABLE_IN2 0x16623c
4930 #define XSDM_REG_ENABLE_OUT1 0x166240
4931 #define XSDM_REG_ENABLE_OUT2 0x166244
4932 /* [RW 4] The initial number of messages that can be sent to the pxp control
4933 interface without receiving any ACK. */
4934 #define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc
4935 /* [ST 32] The number of ACK after placement messages received */
4936 #define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c
4937 /* [ST 32] The number of packet end messages received from the parser */
4938 #define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274
4939 /* [ST 32] The number of requests received from the pxp async if */
4940 #define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278
4941 /* [ST 32] The number of commands received in queue 0 */
4942 #define XSDM_REG_NUM_OF_Q0_CMD 0x166248
4943 /* [ST 32] The number of commands received in queue 10 */
4944 #define XSDM_REG_NUM_OF_Q10_CMD 0x16626c
4945 /* [ST 32] The number of commands received in queue 11 */
4946 #define XSDM_REG_NUM_OF_Q11_CMD 0x166270
4947 /* [ST 32] The number of commands received in queue 1 */
4948 #define XSDM_REG_NUM_OF_Q1_CMD 0x16624c
4949 /* [ST 32] The number of commands received in queue 3 */
4950 #define XSDM_REG_NUM_OF_Q3_CMD 0x166250
4951 /* [ST 32] The number of commands received in queue 4 */
4952 #define XSDM_REG_NUM_OF_Q4_CMD 0x166254
4953 /* [ST 32] The number of commands received in queue 5 */
4954 #define XSDM_REG_NUM_OF_Q5_CMD 0x166258
4955 /* [ST 32] The number of commands received in queue 6 */
4956 #define XSDM_REG_NUM_OF_Q6_CMD 0x16625c
4957 /* [ST 32] The number of commands received in queue 7 */
4958 #define XSDM_REG_NUM_OF_Q7_CMD 0x166260
4959 /* [ST 32] The number of commands received in queue 8 */
4960 #define XSDM_REG_NUM_OF_Q8_CMD 0x166264
4961 /* [ST 32] The number of commands received in queue 9 */
4962 #define XSDM_REG_NUM_OF_Q9_CMD 0x166268
4963 /* [RW 13] The start address in the internal RAM for queue counters */
4964 #define XSDM_REG_Q_COUNTER_START_ADDR 0x166010
4965 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
4966 #define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548
4967 /* [R 1] parser fifo empty in sdm_sync block */
4968 #define XSDM_REG_SYNC_PARSER_EMPTY 0x166550
4969 /* [R 1] parser serial fifo empty in sdm_sync block */
4970 #define XSDM_REG_SYNC_SYNC_EMPTY 0x166558
4971 /* [RW 32] Tick for timer counter. Applicable only when
4972 ~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */
4973 #define XSDM_REG_TIMER_TICK 0x166000
4974 /* [RW 32] Interrupt mask register #0 read/write */
4975 #define XSDM_REG_XSDM_INT_MASK_0 0x16629c
4976 #define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
4977 /* [R 32] Interrupt register #0 read */
4978 #define XSDM_REG_XSDM_INT_STS_0 0x166290
4979 #define XSDM_REG_XSDM_INT_STS_1 0x1662a0
4980 /* [RW 11] Parity mask register #0 read/write */
4981 #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
4982 /* [R 11] Parity register #0 read */
4983 #define XSDM_REG_XSDM_PRTY_STS 0x1662b0
4984 /* [RW 5] The number of time_slots in the arbitration cycle */
4985 #define XSEM_REG_ARB_CYCLE_SIZE 0x280034
4986 /* [RW 3] The source that is associated with arbitration element 0. Source
4987 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4988 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
4989 #define XSEM_REG_ARB_ELEMENT0 0x280020
4990 /* [RW 3] The source that is associated with arbitration element 1. Source
4991 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4992 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4993 Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */
4994 #define XSEM_REG_ARB_ELEMENT1 0x280024
4995 /* [RW 3] The source that is associated with arbitration element 2. Source
4996 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4997 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4998 Could not be equal to register ~xsem_registers_arb_element0.arb_element0
4999 and ~xsem_registers_arb_element1.arb_element1 */
5000 #define XSEM_REG_ARB_ELEMENT2 0x280028
5001 /* [RW 3] The source that is associated with arbitration element 3. Source
5002 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5003 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
5004 not be equal to register ~xsem_registers_arb_element0.arb_element0 and
5005 ~xsem_registers_arb_element1.arb_element1 and
5006 ~xsem_registers_arb_element2.arb_element2 */
5007 #define XSEM_REG_ARB_ELEMENT3 0x28002c
5008 /* [RW 3] The source that is associated with arbitration element 4. Source
5009 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5010 sleeping thread with priority 1; 4- sleeping thread with priority 2.
5011 Could not be equal to register ~xsem_registers_arb_element0.arb_element0
5012 and ~xsem_registers_arb_element1.arb_element1 and
5013 ~xsem_registers_arb_element2.arb_element2 and
5014 ~xsem_registers_arb_element3.arb_element3 */
5015 #define XSEM_REG_ARB_ELEMENT4 0x280030
5016 #define XSEM_REG_ENABLE_IN 0x2800a4
5017 #define XSEM_REG_ENABLE_OUT 0x2800a8
5018 /* [RW 32] This address space contains all registers and memories that are
5019 placed in SEM_FAST block. The SEM_FAST registers are described in
5020 appendix B. In order to access the sem_fast registers the base address
5021 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
5022 #define XSEM_REG_FAST_MEMORY 0x2a0000
5023 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
5025 #define XSEM_REG_FIC0_DISABLE 0x280224
5026 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
5028 #define XSEM_REG_FIC1_DISABLE 0x280234
5029 /* [RW 15] Interrupt table Read and write access to it is not possible in
5030 the middle of the work */
5031 #define XSEM_REG_INT_TABLE 0x280400
5032 /* [ST 24] Statistics register. The number of messages that entered through
5034 #define XSEM_REG_MSG_NUM_FIC0 0x280000
5035 /* [ST 24] Statistics register. The number of messages that entered through
5037 #define XSEM_REG_MSG_NUM_FIC1 0x280004
5038 /* [ST 24] Statistics register. The number of messages that were sent to
5040 #define XSEM_REG_MSG_NUM_FOC0 0x280008
5041 /* [ST 24] Statistics register. The number of messages that were sent to
5043 #define XSEM_REG_MSG_NUM_FOC1 0x28000c
5044 /* [ST 24] Statistics register. The number of messages that were sent to
5046 #define XSEM_REG_MSG_NUM_FOC2 0x280010
5047 /* [ST 24] Statistics register. The number of messages that were sent to
5049 #define XSEM_REG_MSG_NUM_FOC3 0x280014
5050 /* [RW 1] Disables input messages from the passive buffer May be updated
5051 during run_time by the microcode */
5052 #define XSEM_REG_PAS_DISABLE 0x28024c
5053 /* [WB 128] Debug only. Passive buffer memory */
5054 #define XSEM_REG_PASSIVE_BUFFER 0x282000
5055 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
5056 #define XSEM_REG_PRAM 0x2c0000
5057 /* [R 16] Valid sleeping threads indication have bit per thread */
5058 #define XSEM_REG_SLEEP_THREADS_VALID 0x28026c
5059 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
5060 #define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0
5061 /* [RW 16] List of free threads . There is a bit per thread. */
5062 #define XSEM_REG_THREADS_LIST 0x2802e4
5063 /* [RW 3] The arbitration scheme of time_slot 0 */
5064 #define XSEM_REG_TS_0_AS 0x280038
5065 /* [RW 3] The arbitration scheme of time_slot 10 */
5066 #define XSEM_REG_TS_10_AS 0x280060
5067 /* [RW 3] The arbitration scheme of time_slot 11 */
5068 #define XSEM_REG_TS_11_AS 0x280064
5069 /* [RW 3] The arbitration scheme of time_slot 12 */
5070 #define XSEM_REG_TS_12_AS 0x280068
5071 /* [RW 3] The arbitration scheme of time_slot 13 */
5072 #define XSEM_REG_TS_13_AS 0x28006c
5073 /* [RW 3] The arbitration scheme of time_slot 14 */
5074 #define XSEM_REG_TS_14_AS 0x280070
5075 /* [RW 3] The arbitration scheme of time_slot 15 */
5076 #define XSEM_REG_TS_15_AS 0x280074
5077 /* [RW 3] The arbitration scheme of time_slot 16 */
5078 #define XSEM_REG_TS_16_AS 0x280078
5079 /* [RW 3] The arbitration scheme of time_slot 17 */
5080 #define XSEM_REG_TS_17_AS 0x28007c
5081 /* [RW 3] The arbitration scheme of time_slot 18 */
5082 #define XSEM_REG_TS_18_AS 0x280080
5083 /* [RW 3] The arbitration scheme of time_slot 1 */
5084 #define XSEM_REG_TS_1_AS 0x28003c
5085 /* [RW 3] The arbitration scheme of time_slot 2 */
5086 #define XSEM_REG_TS_2_AS 0x280040
5087 /* [RW 3] The arbitration scheme of time_slot 3 */
5088 #define XSEM_REG_TS_3_AS 0x280044
5089 /* [RW 3] The arbitration scheme of time_slot 4 */
5090 #define XSEM_REG_TS_4_AS 0x280048
5091 /* [RW 3] The arbitration scheme of time_slot 5 */
5092 #define XSEM_REG_TS_5_AS 0x28004c
5093 /* [RW 3] The arbitration scheme of time_slot 6 */
5094 #define XSEM_REG_TS_6_AS 0x280050
5095 /* [RW 3] The arbitration scheme of time_slot 7 */
5096 #define XSEM_REG_TS_7_AS 0x280054
5097 /* [RW 3] The arbitration scheme of time_slot 8 */
5098 #define XSEM_REG_TS_8_AS 0x280058
5099 /* [RW 3] The arbitration scheme of time_slot 9 */
5100 #define XSEM_REG_TS_9_AS 0x28005c
5101 /* [RW 32] Interrupt mask register #0 read/write */
5102 #define XSEM_REG_XSEM_INT_MASK_0 0x280110
5103 #define XSEM_REG_XSEM_INT_MASK_1 0x280120
5104 /* [R 32] Interrupt register #0 read */
5105 #define XSEM_REG_XSEM_INT_STS_0 0x280104
5106 #define XSEM_REG_XSEM_INT_STS_1 0x280114
5107 /* [RW 32] Parity mask register #0 read/write */
5108 #define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
5109 #define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
5110 /* [R 32] Parity register #0 read */
5111 #define XSEM_REG_XSEM_PRTY_STS_0 0x280124
5112 #define XSEM_REG_XSEM_PRTY_STS_1 0x280134
5113 #define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
5114 #define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
5115 #define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
5116 #define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0)
5117 #define MCPR_NVM_COMMAND_DOIT (1L<<4)
5118 #define MCPR_NVM_COMMAND_DONE (1L<<3)
5119 #define MCPR_NVM_COMMAND_FIRST (1L<<7)
5120 #define MCPR_NVM_COMMAND_LAST (1L<<8)
5121 #define MCPR_NVM_COMMAND_WR (1L<<5)
5122 #define MCPR_NVM_COMMAND_WREN (1L<<16)
5123 #define MCPR_NVM_COMMAND_WREN_BITSHIFT 16
5124 #define MCPR_NVM_COMMAND_WRDI (1L<<17)
5125 #define MCPR_NVM_COMMAND_WRDI_BITSHIFT 17
5126 #define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9)
5127 #define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
5128 #define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
5129 #define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3)
5130 #define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
5131 #define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3)
5132 #define BIGMAC_REGISTER_RX_CONTROL (0x21<<3)
5133 #define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3)
5134 #define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3)
5135 #define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3)
5136 #define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3)
5137 #define BIGMAC_REGISTER_TX_CONTROL (0x07<<3)
5138 #define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3)
5139 #define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3)
5140 #define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3)
5141 #define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3)
5142 #define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3)
5143 #define EMAC_LED_1000MB_OVERRIDE (1L<<1)
5144 #define EMAC_LED_100MB_OVERRIDE (1L<<2)
5145 #define EMAC_LED_10MB_OVERRIDE (1L<<3)
5146 #define EMAC_LED_2500MB_OVERRIDE (1L<<12)
5147 #define EMAC_LED_OVERRIDE (1L<<0)
5148 #define EMAC_LED_TRAFFIC (1L<<6)
5149 #define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26)
5150 #define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26)
5151 #define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26)
5152 #define EMAC_MDIO_COMM_DATA (0xffffL<<0)
5153 #define EMAC_MDIO_COMM_START_BUSY (1L<<29)
5154 #define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
5155 #define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
5156 #define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16)
5157 #define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
5158 #define EMAC_MODE_25G_MODE (1L<<5)
5159 #define EMAC_MODE_HALF_DUPLEX (1L<<1)
5160 #define EMAC_MODE_PORT_GMII (2L<<2)
5161 #define EMAC_MODE_PORT_MII (1L<<2)
5162 #define EMAC_MODE_PORT_MII_10M (3L<<2)
5163 #define EMAC_MODE_RESET (1L<<0)
5164 #define EMAC_REG_EMAC_LED 0xc
5165 #define EMAC_REG_EMAC_MAC_MATCH 0x10
5166 #define EMAC_REG_EMAC_MDIO_COMM 0xac
5167 #define EMAC_REG_EMAC_MDIO_MODE 0xb4
5168 #define EMAC_REG_EMAC_MODE 0x0
5169 #define EMAC_REG_EMAC_RX_MODE 0xc8
5170 #define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
5171 #define EMAC_REG_EMAC_RX_STAT_AC 0x180
5172 #define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4
5173 #define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23
5174 #define EMAC_REG_EMAC_TX_MODE 0xbc
5175 #define EMAC_REG_EMAC_TX_STAT_AC 0x280
5176 #define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22
5177 #define EMAC_RX_MODE_FLOW_EN (1L<<2)
5178 #define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
5179 #define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
5180 #define EMAC_RX_MODE_RESET (1L<<0)
5181 #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
5182 #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
5183 #define EMAC_TX_MODE_FLOW_EN (1L<<4)
5184 #define EMAC_TX_MODE_RESET (1L<<0)
5185 #define MISC_REGISTERS_GPIO_0 0
5186 #define MISC_REGISTERS_GPIO_1 1
5187 #define MISC_REGISTERS_GPIO_2 2
5188 #define MISC_REGISTERS_GPIO_3 3
5189 #define MISC_REGISTERS_GPIO_CLR_POS 16
5190 #define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24)
5191 #define MISC_REGISTERS_GPIO_FLOAT_POS 24
5192 #define MISC_REGISTERS_GPIO_HIGH 1
5193 #define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
5194 #define MISC_REGISTERS_GPIO_INT_CLR_POS 24
5195 #define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0
5196 #define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1
5197 #define MISC_REGISTERS_GPIO_INT_SET_POS 16
5198 #define MISC_REGISTERS_GPIO_LOW 0
5199 #define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
5200 #define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
5201 #define MISC_REGISTERS_GPIO_PORT_SHIFT 4
5202 #define MISC_REGISTERS_GPIO_SET_POS 8
5203 #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
5204 #define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7)
5205 #define MISC_REGISTERS_RESET_REG_1_SET 0x584
5206 #define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
5207 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0)
5208 #define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14)
5209 #define MISC_REGISTERS_RESET_REG_2_SET 0x594
5210 #define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8
5211 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1)
5212 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2)
5213 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3)
5214 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0)
5215 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5)
5216 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6)
5217 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7)
5218 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4)
5219 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
5220 #define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
5221 #define MISC_REGISTERS_SPIO_4 4
5222 #define MISC_REGISTERS_SPIO_5 5
5223 #define MISC_REGISTERS_SPIO_7 7
5224 #define MISC_REGISTERS_SPIO_CLR_POS 16
5225 #define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24)
5226 #define GRC_MISC_REGISTERS_SPIO_FLOAT7 0x80000000
5227 #define GRC_MISC_REGISTERS_SPIO_FLOAT6 0x40000000
5228 #define GRC_MISC_REGISTERS_SPIO_FLOAT5 0x20000000
5229 #define GRC_MISC_REGISTERS_SPIO_FLOAT4 0x10000000
5230 #define MISC_REGISTERS_SPIO_FLOAT_POS 24
5231 #define MISC_REGISTERS_SPIO_INPUT_HI_Z 2
5232 #define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16
5233 #define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1
5234 #define MISC_REGISTERS_SPIO_OUTPUT_LOW 0
5235 #define MISC_REGISTERS_SPIO_SET_POS 8
5236 #define HW_LOCK_MAX_RESOURCE_VALUE 31
5237 #define HW_LOCK_RESOURCE_GPIO 1
5238 #define HW_LOCK_RESOURCE_MDIO 0
5239 #define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3
5240 #define HW_LOCK_RESOURCE_SPIO 2
5241 #define HW_LOCK_RESOURCE_UNDI 5
5242 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18)
5243 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31)
5244 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9)
5245 #define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (1<<8)
5246 #define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (1<<7)
5247 #define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (1<<6)
5248 #define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (1<<29)
5249 #define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (1<<28)
5250 #define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (1<<1)
5251 #define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (1<<0)
5252 #define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (1<<18)
5253 #define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (1<<11)
5254 #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (1<<13)
5255 #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (1<<12)
5256 #define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (1<<5)
5257 #define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (1<<9)
5258 #define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (1<<12)
5259 #define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (1<<15)
5260 #define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (1<<14)
5261 #define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (1<<20)
5262 #define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (1<<0)
5263 #define AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT (1<<31)
5264 #define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (1<<3)
5265 #define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (1<<2)
5266 #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (1<<5)
5267 #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (1<<4)
5268 #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3)
5269 #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2)
5270 #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22)
5271 #define AEU_INPUTS_ATTN_BITS_SPIO5 (1<<15)
5272 #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27)
5273 #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5)
5274 #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25)
5275 #define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (1<<24)
5276 #define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (1<<29)
5277 #define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (1<<28)
5278 #define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (1<<23)
5279 #define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (1<<27)
5280 #define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (1<<26)
5281 #define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (1<<21)
5282 #define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (1<<20)
5283 #define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (1<<25)
5284 #define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (1<<24)
5285 #define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (1<<16)
5286 #define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (1<<9)
5287 #define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (1<<7)
5288 #define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (1<<6)
5289 #define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (1<<11)
5290 #define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (1<<10)
5291 #define RESERVED_GENERAL_ATTENTION_BIT_0 0
5293 #define EVEREST_GEN_ATTN_IN_USE_MASK 0x3ffe0
5294 #define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000
5296 #define RESERVED_GENERAL_ATTENTION_BIT_6 6
5297 #define RESERVED_GENERAL_ATTENTION_BIT_7 7
5298 #define RESERVED_GENERAL_ATTENTION_BIT_8 8
5299 #define RESERVED_GENERAL_ATTENTION_BIT_9 9
5300 #define RESERVED_GENERAL_ATTENTION_BIT_10 10
5301 #define RESERVED_GENERAL_ATTENTION_BIT_11 11
5302 #define RESERVED_GENERAL_ATTENTION_BIT_12 12
5303 #define RESERVED_GENERAL_ATTENTION_BIT_13 13
5304 #define RESERVED_GENERAL_ATTENTION_BIT_14 14
5305 #define RESERVED_GENERAL_ATTENTION_BIT_15 15
5306 #define RESERVED_GENERAL_ATTENTION_BIT_16 16
5307 #define RESERVED_GENERAL_ATTENTION_BIT_17 17
5308 #define RESERVED_GENERAL_ATTENTION_BIT_18 18
5309 #define RESERVED_GENERAL_ATTENTION_BIT_19 19
5310 #define RESERVED_GENERAL_ATTENTION_BIT_20 20
5311 #define RESERVED_GENERAL_ATTENTION_BIT_21 21
5313 /* storm asserts attention bits */
5314 #define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7
5315 #define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8
5316 #define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9
5317 #define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10
5319 /* mcp error attention bit */
5320 #define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11
5322 /*E1H NIG status sync attention mapped to group 4-7*/
5323 #define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12
5324 #define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13
5325 #define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14
5326 #define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15
5327 #define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16
5328 #define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17
5329 #define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18
5330 #define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19
5333 #define LATCHED_ATTN_RBCR 23
5334 #define LATCHED_ATTN_RBCT 24
5335 #define LATCHED_ATTN_RBCN 25
5336 #define LATCHED_ATTN_RBCU 26
5337 #define LATCHED_ATTN_RBCP 27
5338 #define LATCHED_ATTN_TIMEOUT_GRC 28
5339 #define LATCHED_ATTN_RSVD_GRC 29
5340 #define LATCHED_ATTN_ROM_PARITY_MCP 30
5341 #define LATCHED_ATTN_UM_RX_PARITY_MCP 31
5342 #define LATCHED_ATTN_UM_TX_PARITY_MCP 32
5343 #define LATCHED_ATTN_SCPAD_PARITY_MCP 33
5345 #define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32)
5346 #define GENERAL_ATTEN_OFFSET(atten_name) (1 << ((94 + atten_name) % 32))
5348 * This file defines GRC base address for every block.
5349 * This file is included by chipsim, asm microcode and cpp microcode.
5350 * These values are used in Design.xml on regBase attribute
5351 * Use the base with the generated offsets of specific registers.
5354 #define GRCBASE_PXPCS 0x000000
5355 #define GRCBASE_PCICONFIG 0x002000
5356 #define GRCBASE_PCIREG 0x002400
5357 #define GRCBASE_EMAC0 0x008000
5358 #define GRCBASE_EMAC1 0x008400
5359 #define GRCBASE_DBU 0x008800
5360 #define GRCBASE_MISC 0x00A000
5361 #define GRCBASE_DBG 0x00C000
5362 #define GRCBASE_NIG 0x010000
5363 #define GRCBASE_XCM 0x020000
5364 #define GRCBASE_PRS 0x040000
5365 #define GRCBASE_SRCH 0x040400
5366 #define GRCBASE_TSDM 0x042000
5367 #define GRCBASE_TCM 0x050000
5368 #define GRCBASE_BRB1 0x060000
5369 #define GRCBASE_MCP 0x080000
5370 #define GRCBASE_UPB 0x0C1000
5371 #define GRCBASE_CSDM 0x0C2000
5372 #define GRCBASE_USDM 0x0C4000
5373 #define GRCBASE_CCM 0x0D0000
5374 #define GRCBASE_UCM 0x0E0000
5375 #define GRCBASE_CDU 0x101000
5376 #define GRCBASE_DMAE 0x102000
5377 #define GRCBASE_PXP 0x103000
5378 #define GRCBASE_CFC 0x104000
5379 #define GRCBASE_HC 0x108000
5380 #define GRCBASE_PXP2 0x120000
5381 #define GRCBASE_PBF 0x140000
5382 #define GRCBASE_XPB 0x161000
5383 #define GRCBASE_TIMERS 0x164000
5384 #define GRCBASE_XSDM 0x166000
5385 #define GRCBASE_QM 0x168000
5386 #define GRCBASE_DQ 0x170000
5387 #define GRCBASE_TSEM 0x180000
5388 #define GRCBASE_CSEM 0x200000
5389 #define GRCBASE_XSEM 0x280000
5390 #define GRCBASE_USEM 0x300000
5391 #define GRCBASE_MISC_AEU GRCBASE_MISC
5394 /* offset of configuration space in the pci core register */
5395 #define PCICFG_OFFSET 0x2000
5396 #define PCICFG_VENDOR_ID_OFFSET 0x00
5397 #define PCICFG_DEVICE_ID_OFFSET 0x02
5398 #define PCICFG_COMMAND_OFFSET 0x04
5399 #define PCICFG_COMMAND_IO_SPACE (1<<0)
5400 #define PCICFG_COMMAND_MEM_SPACE (1<<1)
5401 #define PCICFG_COMMAND_BUS_MASTER (1<<2)
5402 #define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3)
5403 #define PCICFG_COMMAND_MWI_CYCLES (1<<4)
5404 #define PCICFG_COMMAND_VGA_SNOOP (1<<5)
5405 #define PCICFG_COMMAND_PERR_ENA (1<<6)
5406 #define PCICFG_COMMAND_STEPPING (1<<7)
5407 #define PCICFG_COMMAND_SERR_ENA (1<<8)
5408 #define PCICFG_COMMAND_FAST_B2B (1<<9)
5409 #define PCICFG_COMMAND_INT_DISABLE (1<<10)
5410 #define PCICFG_COMMAND_RESERVED (0x1f<<11)
5411 #define PCICFG_STATUS_OFFSET 0x06
5412 #define PCICFG_REVESION_ID 0x08
5413 #define PCICFG_CACHE_LINE_SIZE 0x0c
5414 #define PCICFG_LATENCY_TIMER 0x0d
5415 #define PCICFG_BAR_1_LOW 0x10
5416 #define PCICFG_BAR_1_HIGH 0x14
5417 #define PCICFG_BAR_2_LOW 0x18
5418 #define PCICFG_BAR_2_HIGH 0x1c
5419 #define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c
5420 #define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e
5421 #define PCICFG_INT_LINE 0x3c
5422 #define PCICFG_INT_PIN 0x3d
5423 #define PCICFG_PM_CAPABILITY 0x48
5424 #define PCICFG_PM_CAPABILITY_VERSION (0x3<<16)
5425 #define PCICFG_PM_CAPABILITY_CLOCK (1<<19)
5426 #define PCICFG_PM_CAPABILITY_RESERVED (1<<20)
5427 #define PCICFG_PM_CAPABILITY_DSI (1<<21)
5428 #define PCICFG_PM_CAPABILITY_AUX_CURRENT (0x7<<22)
5429 #define PCICFG_PM_CAPABILITY_D1_SUPPORT (1<<25)
5430 #define PCICFG_PM_CAPABILITY_D2_SUPPORT (1<<26)
5431 #define PCICFG_PM_CAPABILITY_PME_IN_D0 (1<<27)
5432 #define PCICFG_PM_CAPABILITY_PME_IN_D1 (1<<28)
5433 #define PCICFG_PM_CAPABILITY_PME_IN_D2 (1<<29)
5434 #define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT (1<<30)
5435 #define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD (1<<31)
5436 #define PCICFG_PM_CSR_OFFSET 0x4c
5437 #define PCICFG_PM_CSR_STATE (0x3<<0)
5438 #define PCICFG_PM_CSR_PME_ENABLE (1<<8)
5439 #define PCICFG_PM_CSR_PME_STATUS (1<<15)
5440 #define PCICFG_MSI_CAP_ID 0x58
5441 #define PCICFG_MSI_CONTROL_ENABLE (0x1<<16)
5442 #define PCICFG_MSI_CONTROL_MCAP (0x7<<17)
5443 #define PCICFG_MSI_CONTROL_MENA (0x7<<20)
5444 #define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23)
5445 #define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24)
5446 #define PCICFG_GRC_ADDRESS 0x78
5447 #define PCICFG_GRC_DATA 0x80
5448 #define PCICFG_MSIX_CAP_ID 0xa0
5449 #define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16)
5450 #define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27)
5451 #define PCICFG_MSIX_CONTROL_FUNC_MASK (0x1<<30)
5452 #define PCICFG_MSIX_CONTROL_MSIX_ENABLE (0x1<<31)
5454 #define PCICFG_DEVICE_CONTROL 0xb4
5455 #define PCICFG_DEVICE_STATUS 0xb6
5456 #define PCICFG_DEVICE_STATUS_CORR_ERR_DET (1<<0)
5457 #define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET (1<<1)
5458 #define PCICFG_DEVICE_STATUS_FATAL_ERR_DET (1<<2)
5459 #define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET (1<<3)
5460 #define PCICFG_DEVICE_STATUS_AUX_PWR_DET (1<<4)
5461 #define PCICFG_DEVICE_STATUS_NO_PEND (1<<5)
5462 #define PCICFG_LINK_CONTROL 0xbc
5465 #define BAR_USTRORM_INTMEM 0x400000
5466 #define BAR_CSTRORM_INTMEM 0x410000
5467 #define BAR_XSTRORM_INTMEM 0x420000
5468 #define BAR_TSTRORM_INTMEM 0x430000
5470 /* for accessing the IGU in case of status block ACK */
5471 #define BAR_IGU_INTMEM 0x440000
5473 #define BAR_DOORBELL_OFFSET 0x800000
5475 #define BAR_ME_REGISTER 0x450000
5477 /* config_2 offset */
5478 #define GRC_CONFIG_2_SIZE_REG 0x408
5479 #define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0)
5480 #define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0)
5481 #define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0)
5482 #define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0)
5483 #define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0)
5484 #define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0)
5485 #define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0)
5486 #define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0)
5487 #define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0)
5488 #define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0)
5489 #define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0)
5490 #define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0)
5491 #define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0)
5492 #define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0)
5493 #define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0)
5494 #define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0)
5495 #define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0)
5496 #define PCI_CONFIG_2_BAR1_64ENA (1L<<4)
5497 #define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5)
5498 #define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6)
5499 #define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7)
5500 #define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8)
5501 #define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8)
5502 #define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8)
5503 #define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8)
5504 #define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8)
5505 #define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8)
5506 #define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8)
5507 #define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8)
5508 #define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8)
5509 #define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8)
5510 #define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8)
5511 #define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8)
5512 #define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8)
5513 #define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8)
5514 #define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8)
5515 #define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8)
5516 #define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8)
5517 #define PCI_CONFIG_2_BAR_PREFETCH (1L<<16)
5518 #define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17)
5520 /* config_3 offset */
5521 #define GRC_CONFIG_3_SIZE_REG 0x40c
5522 #define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0)
5523 #define PCI_CONFIG_3_FORCE_PME (1L<<24)
5524 #define PCI_CONFIG_3_PME_STATUS (1L<<25)
5525 #define PCI_CONFIG_3_PME_ENABLE (1L<<26)
5526 #define PCI_CONFIG_3_PM_STATE (0x3L<<27)
5527 #define PCI_CONFIG_3_VAUX_PRESET (1L<<30)
5528 #define PCI_CONFIG_3_PCI_POWER (1L<<31)
5530 #define GRC_BAR2_CONFIG 0x4e0
5531 #define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0)
5532 #define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0)
5533 #define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0)
5534 #define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0)
5535 #define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0)
5536 #define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0)
5537 #define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0)
5538 #define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0)
5539 #define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0)
5540 #define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0)
5541 #define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0)
5542 #define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0)
5543 #define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0)
5544 #define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0)
5545 #define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0)
5546 #define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0)
5547 #define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0)
5548 #define PCI_CONFIG_2_BAR2_64ENA (1L<<4)
5550 #define PCI_PM_DATA_A 0x410
5551 #define PCI_PM_DATA_B 0x414
5552 #define PCI_ID_VAL1 0x434
5553 #define PCI_ID_VAL2 0x438
5556 #define MDIO_REG_BANK_CL73_IEEEB0 0x0
5557 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
5558 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
5559 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000
5560 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000
5562 #define MDIO_REG_BANK_CL73_IEEEB1 0x10
5563 #define MDIO_CL73_IEEEB1_AN_ADV2 0x01
5564 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000
5565 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020
5566 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040
5567 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
5569 #define MDIO_REG_BANK_RX0 0x80b0
5570 #define MDIO_RX0_RX_EQ_BOOST 0x1c
5571 #define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
5572 #define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
5574 #define MDIO_REG_BANK_RX1 0x80c0
5575 #define MDIO_RX1_RX_EQ_BOOST 0x1c
5576 #define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
5577 #define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10
5579 #define MDIO_REG_BANK_RX2 0x80d0
5580 #define MDIO_RX2_RX_EQ_BOOST 0x1c
5581 #define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
5582 #define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10
5584 #define MDIO_REG_BANK_RX3 0x80e0
5585 #define MDIO_RX3_RX_EQ_BOOST 0x1c
5586 #define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
5587 #define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10
5589 #define MDIO_REG_BANK_RX_ALL 0x80f0
5590 #define MDIO_RX_ALL_RX_EQ_BOOST 0x1c
5591 #define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
5592 #define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
5594 #define MDIO_REG_BANK_TX0 0x8060
5595 #define MDIO_TX0_TX_DRIVER 0x17
5596 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
5597 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
5598 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
5599 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
5600 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
5601 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
5602 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
5603 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
5604 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
5606 #define MDIO_REG_BANK_XGXS_BLOCK0 0x8000
5607 #define MDIO_BLOCK0_XGXS_CONTROL 0x10
5609 #define MDIO_REG_BANK_XGXS_BLOCK1 0x8010
5610 #define MDIO_BLOCK1_LANE_CTRL0 0x15
5611 #define MDIO_BLOCK1_LANE_CTRL1 0x16
5612 #define MDIO_BLOCK1_LANE_CTRL2 0x17
5613 #define MDIO_BLOCK1_LANE_PRBS 0x19
5615 #define MDIO_REG_BANK_XGXS_BLOCK2 0x8100
5616 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10
5617 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000
5618 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
5619 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
5620 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
5621 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
5622 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
5623 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
5624 #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
5626 #define MDIO_REG_BANK_GP_STATUS 0x8120
5627 #define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B
5628 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
5629 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
5630 #define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
5631 #define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
5632 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
5633 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
5634 #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
5635 #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
5636 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
5637 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
5638 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
5639 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
5640 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
5641 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
5642 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
5643 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
5644 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
5645 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
5646 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
5647 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
5648 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
5649 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
5650 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
5651 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
5654 #define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130
5655 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11
5656 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1
5657 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13
5658 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1)
5660 #define MDIO_REG_BANK_SERDES_DIGITAL 0x8300
5661 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10
5662 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001
5663 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002
5664 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004
5665 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008
5666 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010
5667 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020
5668 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11
5669 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001
5670 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040
5671 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14
5672 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004
5673 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018
5674 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3
5675 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018
5676 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010
5677 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008
5678 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000
5679 #define MDIO_SERDES_DIGITAL_MISC1 0x18
5680 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000
5681 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000
5682 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000
5683 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000
5684 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000
5685 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000
5686 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010
5687 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f
5688 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000
5689 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001
5690 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002
5691 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003
5692 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004
5693 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005
5694 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006
5695 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007
5696 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008
5697 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009
5699 #define MDIO_REG_BANK_OVER_1G 0x8320
5700 #define MDIO_OVER_1G_DIGCTL_3_4 0x14
5701 #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0
5702 #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5
5703 #define MDIO_OVER_1G_UP1 0x19
5704 #define MDIO_OVER_1G_UP1_2_5G 0x0001
5705 #define MDIO_OVER_1G_UP1_5G 0x0002
5706 #define MDIO_OVER_1G_UP1_6G 0x0004
5707 #define MDIO_OVER_1G_UP1_10G 0x0010
5708 #define MDIO_OVER_1G_UP1_10GH 0x0008
5709 #define MDIO_OVER_1G_UP1_12G 0x0020
5710 #define MDIO_OVER_1G_UP1_12_5G 0x0040
5711 #define MDIO_OVER_1G_UP1_13G 0x0080
5712 #define MDIO_OVER_1G_UP1_15G 0x0100
5713 #define MDIO_OVER_1G_UP1_16G 0x0200
5714 #define MDIO_OVER_1G_UP2 0x1A
5715 #define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007
5716 #define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038
5717 #define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0
5718 #define MDIO_OVER_1G_UP3 0x1B
5719 #define MDIO_OVER_1G_UP3_HIGIG2 0x0001
5720 #define MDIO_OVER_1G_LP_UP1 0x1C
5721 #define MDIO_OVER_1G_LP_UP2 0x1D
5722 #define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff
5723 #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780
5724 #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
5725 #define MDIO_OVER_1G_LP_UP3 0x1E
5727 #define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350
5728 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
5729 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
5730 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
5732 #define MDIO_REG_BANK_CL73_USERB0 0x8370
5733 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
5734 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
5735 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
5736 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000
5737 #define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14
5738 #define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001
5740 #define MDIO_REG_BANK_AER_BLOCK 0xFFD0
5741 #define MDIO_AER_BLOCK_AER_REG 0x1E
5743 #define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0
5744 #define MDIO_COMBO_IEEE0_MII_CONTROL 0x10
5745 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040
5746 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000
5747 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000
5748 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040
5749 #define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100
5750 #define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200
5751 #define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000
5752 #define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000
5753 #define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000
5754 #define MDIO_COMBO_IEEE0_MII_STATUS 0x11
5755 #define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004
5756 #define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020
5757 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14
5758 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020
5759 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040
5760 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180
5761 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000
5762 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080
5763 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100
5764 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180
5765 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000
5766 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15
5767 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000
5768 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000
5769 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180
5770 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000
5771 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180
5772 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040
5773 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020
5774 /*WhenthelinkpartnerisinSGMIImode(bit0=1),then
5775 bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
5776 Theotherbitsarereservedandshouldbezero*/
5777 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
5780 #define MDIO_PMA_DEVAD 0x1
5782 #define MDIO_PMA_REG_CTRL 0x0
5783 #define MDIO_PMA_REG_STATUS 0x1
5784 #define MDIO_PMA_REG_10G_CTRL2 0x7
5785 #define MDIO_PMA_REG_RX_SD 0xa
5787 #define MDIO_PMA_REG_BCM_CTRL 0x0096
5788 #define MDIO_PMA_REG_FEC_CTRL 0x00ab
5789 #define MDIO_PMA_REG_RX_ALARM_CTRL 0x9000
5790 #define MDIO_PMA_REG_LASI_CTRL 0x9002
5791 #define MDIO_PMA_REG_RX_ALARM 0x9003
5792 #define MDIO_PMA_REG_TX_ALARM 0x9004
5793 #define MDIO_PMA_REG_LASI_STATUS 0x9005
5794 #define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800
5795 #define MDIO_PMA_REG_DIGITAL_CTRL 0xc808
5796 #define MDIO_PMA_REG_DIGITAL_STATUS 0xc809
5797 #define MDIO_PMA_REG_TX_POWER_DOWN 0xca02
5798 #define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09
5799 #define MDIO_PMA_REG_MISC_CTRL 0xca0a
5800 #define MDIO_PMA_REG_GEN_CTRL 0xca10
5801 #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188
5802 #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a
5803 #define MDIO_PMA_REG_M8051_MSGIN_REG 0xca12
5804 #define MDIO_PMA_REG_M8051_MSGOUT_REG 0xca13
5805 #define MDIO_PMA_REG_ROM_VER1 0xca19
5806 #define MDIO_PMA_REG_ROM_VER2 0xca1a
5807 #define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b
5808 #define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d
5809 #define MDIO_PMA_REG_MISC_CTRL0 0xca23
5810 #define MDIO_PMA_REG_LRM_MODE 0xca3f
5811 #define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46
5812 #define MDIO_PMA_REG_MISC_CTRL1 0xca85
5814 #define MDIO_PMA_REG_8726_TWO_WIRE_CTRL 0x8000
5815 #define MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK 0x000c
5816 #define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IDLE 0x0000
5817 #define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_COMPLETE 0x0004
5818 #define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IN_PROGRESS 0x0008
5819 #define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_FAILED 0x000c
5820 #define MDIO_PMA_REG_8726_TWO_WIRE_BYTE_CNT 0x8002
5821 #define MDIO_PMA_REG_8726_TWO_WIRE_MEM_ADDR 0x8003
5822 #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820
5823 #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
5824 #define MDIO_PMA_REG_8726_TX_CTRL1 0xca01
5825 #define MDIO_PMA_REG_8726_TX_CTRL2 0xca05
5828 #define MDIO_PMA_REG_7101_RESET 0xc000
5829 #define MDIO_PMA_REG_7107_LED_CNTL 0xc007
5830 #define MDIO_PMA_REG_7101_VER1 0xc026
5831 #define MDIO_PMA_REG_7101_VER2 0xc027
5834 #define MDIO_WIS_DEVAD 0x2
5836 #define MDIO_WIS_REG_LASI_CNTL 0x9002
5837 #define MDIO_WIS_REG_LASI_STATUS 0x9005
5839 #define MDIO_PCS_DEVAD 0x3
5840 #define MDIO_PCS_REG_STATUS 0x0020
5841 #define MDIO_PCS_REG_LASI_STATUS 0x9005
5842 #define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000
5843 #define MDIO_PCS_REG_7101_SPI_MUX 0xD008
5844 #define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
5845 #define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
5846 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
5847 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
5848 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7)
5849 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
5850 #define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028
5853 #define MDIO_XS_DEVAD 0x4
5854 #define MDIO_XS_PLL_SEQUENCER 0x8000
5855 #define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a
5857 #define MDIO_XS_8706_REG_BANK_RX0 0x80bc
5858 #define MDIO_XS_8706_REG_BANK_RX1 0x80cc
5859 #define MDIO_XS_8706_REG_BANK_RX2 0x80dc
5860 #define MDIO_XS_8706_REG_BANK_RX3 0x80ec
5861 #define MDIO_XS_8706_REG_BANK_RXA 0x80fc
5863 #define MDIO_AN_DEVAD 0x7
5865 #define MDIO_AN_REG_CTRL 0x0000
5866 #define MDIO_AN_REG_STATUS 0x0001
5867 #define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020
5868 #define MDIO_AN_REG_ADV_PAUSE 0x0010
5869 #define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400
5870 #define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800
5871 #define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00
5872 #define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00
5873 #define MDIO_AN_REG_ADV 0x0011
5874 #define MDIO_AN_REG_ADV2 0x0012
5875 #define MDIO_AN_REG_LP_AUTO_NEG 0x0013
5876 #define MDIO_AN_REG_MASTER_STATUS 0x0021
5878 #define MDIO_AN_REG_LINK_STATUS 0x8304
5879 #define MDIO_AN_REG_CL37_CL73 0x8370
5880 #define MDIO_AN_REG_CL37_AN 0xffe0
5881 #define MDIO_AN_REG_CL37_FC_LD 0xffe4
5882 #define MDIO_AN_REG_CL37_FC_LP 0xffe5
5885 #define IGU_FUNC_BASE 0x0400
5887 #define IGU_ADDR_MSIX 0x0000
5888 #define IGU_ADDR_INT_ACK 0x0200
5889 #define IGU_ADDR_PROD_UPD 0x0201
5890 #define IGU_ADDR_ATTN_BITS_UPD 0x0202
5891 #define IGU_ADDR_ATTN_BITS_SET 0x0203
5892 #define IGU_ADDR_ATTN_BITS_CLR 0x0204
5893 #define IGU_ADDR_COALESCE_NOW 0x0205
5894 #define IGU_ADDR_SIMD_MASK 0x0206
5895 #define IGU_ADDR_SIMD_NOMASK 0x0207
5896 #define IGU_ADDR_MSI_CTL 0x0210
5897 #define IGU_ADDR_MSI_ADDR_LO 0x0211
5898 #define IGU_ADDR_MSI_ADDR_HI 0x0212
5899 #define IGU_ADDR_MSI_DATA 0x0213
5901 #define IGU_INT_ENABLE 0
5902 #define IGU_INT_DISABLE 1
5903 #define IGU_INT_NOP 2
5904 #define IGU_INT_NOP2 3
5906 #define COMMAND_REG_INT_ACK 0x0
5907 #define COMMAND_REG_PROD_UPD 0x4
5908 #define COMMAND_REG_ATTN_BITS_UPD 0x8
5909 #define COMMAND_REG_ATTN_BITS_SET 0xc
5910 #define COMMAND_REG_ATTN_BITS_CLR 0x10
5911 #define COMMAND_REG_COALESCE_NOW 0x14
5912 #define COMMAND_REG_SIMD_MASK 0x18
5913 #define COMMAND_REG_SIMD_NOMASK 0x1c