1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
30 #include <net/ip6_checksum.h>
32 char e1000_driver_name[] = "e1000";
33 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
34 #define DRV_VERSION "7.3.21-k6-NAPI"
35 const char e1000_driver_version[] = DRV_VERSION;
36 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
38 /* e1000_pci_tbl - PCI Device ID Table
40 * Last entry must be all 0s
43 * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
45 static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
46 INTEL_E1000_ETHERNET_DEVICE(0x1000),
47 INTEL_E1000_ETHERNET_DEVICE(0x1001),
48 INTEL_E1000_ETHERNET_DEVICE(0x1004),
49 INTEL_E1000_ETHERNET_DEVICE(0x1008),
50 INTEL_E1000_ETHERNET_DEVICE(0x1009),
51 INTEL_E1000_ETHERNET_DEVICE(0x100C),
52 INTEL_E1000_ETHERNET_DEVICE(0x100D),
53 INTEL_E1000_ETHERNET_DEVICE(0x100E),
54 INTEL_E1000_ETHERNET_DEVICE(0x100F),
55 INTEL_E1000_ETHERNET_DEVICE(0x1010),
56 INTEL_E1000_ETHERNET_DEVICE(0x1011),
57 INTEL_E1000_ETHERNET_DEVICE(0x1012),
58 INTEL_E1000_ETHERNET_DEVICE(0x1013),
59 INTEL_E1000_ETHERNET_DEVICE(0x1014),
60 INTEL_E1000_ETHERNET_DEVICE(0x1015),
61 INTEL_E1000_ETHERNET_DEVICE(0x1016),
62 INTEL_E1000_ETHERNET_DEVICE(0x1017),
63 INTEL_E1000_ETHERNET_DEVICE(0x1018),
64 INTEL_E1000_ETHERNET_DEVICE(0x1019),
65 INTEL_E1000_ETHERNET_DEVICE(0x101A),
66 INTEL_E1000_ETHERNET_DEVICE(0x101D),
67 INTEL_E1000_ETHERNET_DEVICE(0x101E),
68 INTEL_E1000_ETHERNET_DEVICE(0x1026),
69 INTEL_E1000_ETHERNET_DEVICE(0x1027),
70 INTEL_E1000_ETHERNET_DEVICE(0x1028),
71 INTEL_E1000_ETHERNET_DEVICE(0x1075),
72 INTEL_E1000_ETHERNET_DEVICE(0x1076),
73 INTEL_E1000_ETHERNET_DEVICE(0x1077),
74 INTEL_E1000_ETHERNET_DEVICE(0x1078),
75 INTEL_E1000_ETHERNET_DEVICE(0x1079),
76 INTEL_E1000_ETHERNET_DEVICE(0x107A),
77 INTEL_E1000_ETHERNET_DEVICE(0x107B),
78 INTEL_E1000_ETHERNET_DEVICE(0x107C),
79 INTEL_E1000_ETHERNET_DEVICE(0x108A),
80 INTEL_E1000_ETHERNET_DEVICE(0x1099),
81 INTEL_E1000_ETHERNET_DEVICE(0x10B5),
82 /* required last entry */
86 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
88 int e1000_up(struct e1000_adapter *adapter);
89 void e1000_down(struct e1000_adapter *adapter);
90 void e1000_reinit_locked(struct e1000_adapter *adapter);
91 void e1000_reset(struct e1000_adapter *adapter);
92 int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
93 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
94 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
95 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
96 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
97 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
98 struct e1000_tx_ring *txdr);
99 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
100 struct e1000_rx_ring *rxdr);
101 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
102 struct e1000_tx_ring *tx_ring);
103 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
104 struct e1000_rx_ring *rx_ring);
105 void e1000_update_stats(struct e1000_adapter *adapter);
107 static int e1000_init_module(void);
108 static void e1000_exit_module(void);
109 static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
110 static void __devexit e1000_remove(struct pci_dev *pdev);
111 static int e1000_alloc_queues(struct e1000_adapter *adapter);
112 static int e1000_sw_init(struct e1000_adapter *adapter);
113 static int e1000_open(struct net_device *netdev);
114 static int e1000_close(struct net_device *netdev);
115 static void e1000_configure_tx(struct e1000_adapter *adapter);
116 static void e1000_configure_rx(struct e1000_adapter *adapter);
117 static void e1000_setup_rctl(struct e1000_adapter *adapter);
118 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
119 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
120 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
121 struct e1000_tx_ring *tx_ring);
122 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
123 struct e1000_rx_ring *rx_ring);
124 static void e1000_set_rx_mode(struct net_device *netdev);
125 static void e1000_update_phy_info(unsigned long data);
126 static void e1000_watchdog(unsigned long data);
127 static void e1000_82547_tx_fifo_stall(unsigned long data);
128 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
129 struct net_device *netdev);
130 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
131 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
132 static int e1000_set_mac(struct net_device *netdev, void *p);
133 static irqreturn_t e1000_intr(int irq, void *data);
134 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
135 struct e1000_tx_ring *tx_ring);
136 static int e1000_clean(struct napi_struct *napi, int budget);
137 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
138 struct e1000_rx_ring *rx_ring,
139 int *work_done, int work_to_do);
140 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
141 struct e1000_rx_ring *rx_ring,
142 int *work_done, int work_to_do);
143 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
144 struct e1000_rx_ring *rx_ring,
146 static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
147 struct e1000_rx_ring *rx_ring,
149 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
150 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
152 static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
153 static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
154 static void e1000_tx_timeout(struct net_device *dev);
155 static void e1000_reset_task(struct work_struct *work);
156 static void e1000_smartspeed(struct e1000_adapter *adapter);
157 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
158 struct sk_buff *skb);
160 static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
161 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
162 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
163 static void e1000_restore_vlan(struct e1000_adapter *adapter);
166 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
167 static int e1000_resume(struct pci_dev *pdev);
169 static void e1000_shutdown(struct pci_dev *pdev);
171 #ifdef CONFIG_NET_POLL_CONTROLLER
172 /* for netdump / net console */
173 static void e1000_netpoll (struct net_device *netdev);
176 #define COPYBREAK_DEFAULT 256
177 static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
178 module_param(copybreak, uint, 0644);
179 MODULE_PARM_DESC(copybreak,
180 "Maximum size of packet that is copied to a new buffer on receive");
182 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
183 pci_channel_state_t state);
184 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
185 static void e1000_io_resume(struct pci_dev *pdev);
187 static struct pci_error_handlers e1000_err_handler = {
188 .error_detected = e1000_io_error_detected,
189 .slot_reset = e1000_io_slot_reset,
190 .resume = e1000_io_resume,
193 static struct pci_driver e1000_driver = {
194 .name = e1000_driver_name,
195 .id_table = e1000_pci_tbl,
196 .probe = e1000_probe,
197 .remove = __devexit_p(e1000_remove),
199 /* Power Managment Hooks */
200 .suspend = e1000_suspend,
201 .resume = e1000_resume,
203 .shutdown = e1000_shutdown,
204 .err_handler = &e1000_err_handler
207 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
208 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
209 MODULE_LICENSE("GPL");
210 MODULE_VERSION(DRV_VERSION);
212 static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
213 module_param(debug, int, 0);
214 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
217 * e1000_get_hw_dev - return device
218 * used by hardware layer to print debugging information
221 struct net_device *e1000_get_hw_dev(struct e1000_hw *hw)
223 struct e1000_adapter *adapter = hw->back;
224 return adapter->netdev;
228 * e1000_init_module - Driver Registration Routine
230 * e1000_init_module is the first routine called when the driver is
231 * loaded. All it does is register with the PCI subsystem.
234 static int __init e1000_init_module(void)
237 pr_info("%s - version %s\n", e1000_driver_string, e1000_driver_version);
239 pr_info("%s\n", e1000_copyright);
241 ret = pci_register_driver(&e1000_driver);
242 if (copybreak != COPYBREAK_DEFAULT) {
244 pr_info("copybreak disabled\n");
246 pr_info("copybreak enabled for "
247 "packets <= %u bytes\n", copybreak);
252 module_init(e1000_init_module);
255 * e1000_exit_module - Driver Exit Cleanup Routine
257 * e1000_exit_module is called just before the driver is removed
261 static void __exit e1000_exit_module(void)
263 pci_unregister_driver(&e1000_driver);
266 module_exit(e1000_exit_module);
268 static int e1000_request_irq(struct e1000_adapter *adapter)
270 struct net_device *netdev = adapter->netdev;
271 irq_handler_t handler = e1000_intr;
272 int irq_flags = IRQF_SHARED;
275 err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
278 e_err("Unable to allocate interrupt Error: %d\n", err);
284 static void e1000_free_irq(struct e1000_adapter *adapter)
286 struct net_device *netdev = adapter->netdev;
288 free_irq(adapter->pdev->irq, netdev);
292 * e1000_irq_disable - Mask off interrupt generation on the NIC
293 * @adapter: board private structure
296 static void e1000_irq_disable(struct e1000_adapter *adapter)
298 struct e1000_hw *hw = &adapter->hw;
302 synchronize_irq(adapter->pdev->irq);
306 * e1000_irq_enable - Enable default interrupt generation settings
307 * @adapter: board private structure
310 static void e1000_irq_enable(struct e1000_adapter *adapter)
312 struct e1000_hw *hw = &adapter->hw;
314 ew32(IMS, IMS_ENABLE_MASK);
318 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
320 struct e1000_hw *hw = &adapter->hw;
321 struct net_device *netdev = adapter->netdev;
322 u16 vid = hw->mng_cookie.vlan_id;
323 u16 old_vid = adapter->mng_vlan_id;
324 if (adapter->vlgrp) {
325 if (!vlan_group_get_device(adapter->vlgrp, vid)) {
326 if (hw->mng_cookie.status &
327 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
328 e1000_vlan_rx_add_vid(netdev, vid);
329 adapter->mng_vlan_id = vid;
331 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
333 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
335 !vlan_group_get_device(adapter->vlgrp, old_vid))
336 e1000_vlan_rx_kill_vid(netdev, old_vid);
338 adapter->mng_vlan_id = vid;
342 static void e1000_init_manageability(struct e1000_adapter *adapter)
344 struct e1000_hw *hw = &adapter->hw;
346 if (adapter->en_mng_pt) {
347 u32 manc = er32(MANC);
349 /* disable hardware interception of ARP */
350 manc &= ~(E1000_MANC_ARP_EN);
356 static void e1000_release_manageability(struct e1000_adapter *adapter)
358 struct e1000_hw *hw = &adapter->hw;
360 if (adapter->en_mng_pt) {
361 u32 manc = er32(MANC);
363 /* re-enable hardware interception of ARP */
364 manc |= E1000_MANC_ARP_EN;
371 * e1000_configure - configure the hardware for RX and TX
372 * @adapter = private board structure
374 static void e1000_configure(struct e1000_adapter *adapter)
376 struct net_device *netdev = adapter->netdev;
379 e1000_set_rx_mode(netdev);
381 e1000_restore_vlan(adapter);
382 e1000_init_manageability(adapter);
384 e1000_configure_tx(adapter);
385 e1000_setup_rctl(adapter);
386 e1000_configure_rx(adapter);
387 /* call E1000_DESC_UNUSED which always leaves
388 * at least 1 descriptor unused to make sure
389 * next_to_use != next_to_clean */
390 for (i = 0; i < adapter->num_rx_queues; i++) {
391 struct e1000_rx_ring *ring = &adapter->rx_ring[i];
392 adapter->alloc_rx_buf(adapter, ring,
393 E1000_DESC_UNUSED(ring));
397 int e1000_up(struct e1000_adapter *adapter)
399 struct e1000_hw *hw = &adapter->hw;
401 /* hardware has been reset, we need to reload some things */
402 e1000_configure(adapter);
404 clear_bit(__E1000_DOWN, &adapter->flags);
406 napi_enable(&adapter->napi);
408 e1000_irq_enable(adapter);
410 netif_wake_queue(adapter->netdev);
412 /* fire a link change interrupt to start the watchdog */
413 ew32(ICS, E1000_ICS_LSC);
418 * e1000_power_up_phy - restore link in case the phy was powered down
419 * @adapter: address of board private structure
421 * The phy may be powered down to save power and turn off link when the
422 * driver is unloaded and wake on lan is not enabled (among others)
423 * *** this routine MUST be followed by a call to e1000_reset ***
427 void e1000_power_up_phy(struct e1000_adapter *adapter)
429 struct e1000_hw *hw = &adapter->hw;
432 /* Just clear the power down bit to wake the phy back up */
433 if (hw->media_type == e1000_media_type_copper) {
434 /* according to the manual, the phy will retain its
435 * settings across a power-down/up cycle */
436 e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
437 mii_reg &= ~MII_CR_POWER_DOWN;
438 e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
442 static void e1000_power_down_phy(struct e1000_adapter *adapter)
444 struct e1000_hw *hw = &adapter->hw;
446 /* Power down the PHY so no link is implied when interface is down *
447 * The PHY cannot be powered down if any of the following is true *
450 * (c) SoL/IDER session is active */
451 if (!adapter->wol && hw->mac_type >= e1000_82540 &&
452 hw->media_type == e1000_media_type_copper) {
455 switch (hw->mac_type) {
458 case e1000_82545_rev_3:
460 case e1000_82546_rev_3:
462 case e1000_82541_rev_2:
464 case e1000_82547_rev_2:
465 if (er32(MANC) & E1000_MANC_SMBUS_EN)
471 e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
472 mii_reg |= MII_CR_POWER_DOWN;
473 e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
480 void e1000_down(struct e1000_adapter *adapter)
482 struct e1000_hw *hw = &adapter->hw;
483 struct net_device *netdev = adapter->netdev;
486 /* signal that we're down so the interrupt handler does not
487 * reschedule our watchdog timer */
488 set_bit(__E1000_DOWN, &adapter->flags);
490 /* disable receives in the hardware */
492 ew32(RCTL, rctl & ~E1000_RCTL_EN);
493 /* flush and sleep below */
495 netif_tx_disable(netdev);
497 /* disable transmits in the hardware */
499 tctl &= ~E1000_TCTL_EN;
501 /* flush both disables and wait for them to finish */
505 napi_disable(&adapter->napi);
507 e1000_irq_disable(adapter);
509 del_timer_sync(&adapter->tx_fifo_stall_timer);
510 del_timer_sync(&adapter->watchdog_timer);
511 del_timer_sync(&adapter->phy_info_timer);
513 adapter->link_speed = 0;
514 adapter->link_duplex = 0;
515 netif_carrier_off(netdev);
517 e1000_reset(adapter);
518 e1000_clean_all_tx_rings(adapter);
519 e1000_clean_all_rx_rings(adapter);
522 void e1000_reinit_locked(struct e1000_adapter *adapter)
524 WARN_ON(in_interrupt());
525 while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
529 clear_bit(__E1000_RESETTING, &adapter->flags);
532 void e1000_reset(struct e1000_adapter *adapter)
534 struct e1000_hw *hw = &adapter->hw;
535 u32 pba = 0, tx_space, min_tx_space, min_rx_space;
536 bool legacy_pba_adjust = false;
539 /* Repartition Pba for greater than 9k mtu
540 * To take effect CTRL.RST is required.
543 switch (hw->mac_type) {
544 case e1000_82542_rev2_0:
545 case e1000_82542_rev2_1:
550 case e1000_82541_rev_2:
551 legacy_pba_adjust = true;
555 case e1000_82545_rev_3:
557 case e1000_82546_rev_3:
561 case e1000_82547_rev_2:
562 legacy_pba_adjust = true;
565 case e1000_undefined:
570 if (legacy_pba_adjust) {
571 if (hw->max_frame_size > E1000_RXBUFFER_8192)
572 pba -= 8; /* allocate more FIFO for Tx */
574 if (hw->mac_type == e1000_82547) {
575 adapter->tx_fifo_head = 0;
576 adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
577 adapter->tx_fifo_size =
578 (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
579 atomic_set(&adapter->tx_fifo_stall, 0);
581 } else if (hw->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
582 /* adjust PBA for jumbo frames */
585 /* To maintain wire speed transmits, the Tx FIFO should be
586 * large enough to accommodate two full transmit packets,
587 * rounded up to the next 1KB and expressed in KB. Likewise,
588 * the Rx FIFO should be large enough to accommodate at least
589 * one full receive packet and is similarly rounded up and
590 * expressed in KB. */
592 /* upper 16 bits has Tx packet buffer allocation size in KB */
593 tx_space = pba >> 16;
594 /* lower 16 bits has Rx packet buffer allocation size in KB */
597 * the tx fifo also stores 16 bytes of information about the tx
598 * but don't include ethernet FCS because hardware appends it
600 min_tx_space = (hw->max_frame_size +
601 sizeof(struct e1000_tx_desc) -
603 min_tx_space = ALIGN(min_tx_space, 1024);
605 /* software strips receive CRC, so leave room for it */
606 min_rx_space = hw->max_frame_size;
607 min_rx_space = ALIGN(min_rx_space, 1024);
610 /* If current Tx allocation is less than the min Tx FIFO size,
611 * and the min Tx FIFO size is less than the current Rx FIFO
612 * allocation, take space away from current Rx allocation */
613 if (tx_space < min_tx_space &&
614 ((min_tx_space - tx_space) < pba)) {
615 pba = pba - (min_tx_space - tx_space);
617 /* PCI/PCIx hardware has PBA alignment constraints */
618 switch (hw->mac_type) {
619 case e1000_82545 ... e1000_82546_rev_3:
620 pba &= ~(E1000_PBA_8K - 1);
626 /* if short on rx space, rx wins and must trump tx
627 * adjustment or use Early Receive if available */
628 if (pba < min_rx_space)
636 * flow control settings:
637 * The high water mark must be low enough to fit one full frame
638 * (or the size used for early receive) above it in the Rx FIFO.
639 * Set it to the lower of:
640 * - 90% of the Rx FIFO size, and
641 * - the full Rx FIFO size minus the early receive size (for parts
642 * with ERT support assuming ERT set to E1000_ERT_2048), or
643 * - the full Rx FIFO size minus one full frame
645 hwm = min(((pba << 10) * 9 / 10),
646 ((pba << 10) - hw->max_frame_size));
648 hw->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
649 hw->fc_low_water = hw->fc_high_water - 8;
650 hw->fc_pause_time = E1000_FC_PAUSE_TIME;
652 hw->fc = hw->original_fc;
654 /* Allow time for pending master requests to run */
656 if (hw->mac_type >= e1000_82544)
659 if (e1000_init_hw(hw))
660 e_err("Hardware Error\n");
661 e1000_update_mng_vlan(adapter);
663 /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
664 if (hw->mac_type >= e1000_82544 &&
666 hw->autoneg_advertised == ADVERTISE_1000_FULL) {
667 u32 ctrl = er32(CTRL);
668 /* clear phy power management bit if we are in gig only mode,
669 * which if enabled will attempt negotiation to 100Mb, which
670 * can cause a loss of link at power off or driver unload */
671 ctrl &= ~E1000_CTRL_SWDPIN3;
675 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
676 ew32(VET, ETHERNET_IEEE_VLAN_TYPE);
678 e1000_reset_adaptive(hw);
679 e1000_phy_get_info(hw, &adapter->phy_info);
681 e1000_release_manageability(adapter);
685 * Dump the eeprom for users having checksum issues
687 static void e1000_dump_eeprom(struct e1000_adapter *adapter)
689 struct net_device *netdev = adapter->netdev;
690 struct ethtool_eeprom eeprom;
691 const struct ethtool_ops *ops = netdev->ethtool_ops;
694 u16 csum_old, csum_new = 0;
696 eeprom.len = ops->get_eeprom_len(netdev);
699 data = kmalloc(eeprom.len, GFP_KERNEL);
701 pr_err("Unable to allocate memory to dump EEPROM data\n");
705 ops->get_eeprom(netdev, &eeprom, data);
707 csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
708 (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
709 for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
710 csum_new += data[i] + (data[i + 1] << 8);
711 csum_new = EEPROM_SUM - csum_new;
713 pr_err("/*********************/\n");
714 pr_err("Current EEPROM Checksum : 0x%04x\n", csum_old);
715 pr_err("Calculated : 0x%04x\n", csum_new);
717 pr_err("Offset Values\n");
718 pr_err("======== ======\n");
719 print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
721 pr_err("Include this output when contacting your support provider.\n");
722 pr_err("This is not a software error! Something bad happened to\n");
723 pr_err("your hardware or EEPROM image. Ignoring this problem could\n");
724 pr_err("result in further problems, possibly loss of data,\n");
725 pr_err("corruption or system hangs!\n");
726 pr_err("The MAC Address will be reset to 00:00:00:00:00:00,\n");
727 pr_err("which is invalid and requires you to set the proper MAC\n");
728 pr_err("address manually before continuing to enable this network\n");
729 pr_err("device. Please inspect the EEPROM dump and report the\n");
730 pr_err("issue to your hardware vendor or Intel Customer Support.\n");
731 pr_err("/*********************/\n");
737 * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
738 * @pdev: PCI device information struct
740 * Return true if an adapter needs ioport resources
742 static int e1000_is_need_ioport(struct pci_dev *pdev)
744 switch (pdev->device) {
745 case E1000_DEV_ID_82540EM:
746 case E1000_DEV_ID_82540EM_LOM:
747 case E1000_DEV_ID_82540EP:
748 case E1000_DEV_ID_82540EP_LOM:
749 case E1000_DEV_ID_82540EP_LP:
750 case E1000_DEV_ID_82541EI:
751 case E1000_DEV_ID_82541EI_MOBILE:
752 case E1000_DEV_ID_82541ER:
753 case E1000_DEV_ID_82541ER_LOM:
754 case E1000_DEV_ID_82541GI:
755 case E1000_DEV_ID_82541GI_LF:
756 case E1000_DEV_ID_82541GI_MOBILE:
757 case E1000_DEV_ID_82544EI_COPPER:
758 case E1000_DEV_ID_82544EI_FIBER:
759 case E1000_DEV_ID_82544GC_COPPER:
760 case E1000_DEV_ID_82544GC_LOM:
761 case E1000_DEV_ID_82545EM_COPPER:
762 case E1000_DEV_ID_82545EM_FIBER:
763 case E1000_DEV_ID_82546EB_COPPER:
764 case E1000_DEV_ID_82546EB_FIBER:
765 case E1000_DEV_ID_82546EB_QUAD_COPPER:
772 static const struct net_device_ops e1000_netdev_ops = {
773 .ndo_open = e1000_open,
774 .ndo_stop = e1000_close,
775 .ndo_start_xmit = e1000_xmit_frame,
776 .ndo_get_stats = e1000_get_stats,
777 .ndo_set_rx_mode = e1000_set_rx_mode,
778 .ndo_set_mac_address = e1000_set_mac,
779 .ndo_tx_timeout = e1000_tx_timeout,
780 .ndo_change_mtu = e1000_change_mtu,
781 .ndo_do_ioctl = e1000_ioctl,
782 .ndo_validate_addr = eth_validate_addr,
784 .ndo_vlan_rx_register = e1000_vlan_rx_register,
785 .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
786 .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
787 #ifdef CONFIG_NET_POLL_CONTROLLER
788 .ndo_poll_controller = e1000_netpoll,
793 * e1000_probe - Device Initialization Routine
794 * @pdev: PCI device information struct
795 * @ent: entry in e1000_pci_tbl
797 * Returns 0 on success, negative on failure
799 * e1000_probe initializes an adapter identified by a pci_dev structure.
800 * The OS initialization, configuring of the adapter private structure,
801 * and a hardware reset occur.
803 static int __devinit e1000_probe(struct pci_dev *pdev,
804 const struct pci_device_id *ent)
806 struct net_device *netdev;
807 struct e1000_adapter *adapter;
810 static int cards_found = 0;
811 static int global_quad_port_a = 0; /* global ksp3 port a indication */
812 int i, err, pci_using_dac;
814 u16 eeprom_apme_mask = E1000_EEPROM_APME;
815 int bars, need_ioport;
817 /* do not allocate ioport bars when not needed */
818 need_ioport = e1000_is_need_ioport(pdev);
820 bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
821 err = pci_enable_device(pdev);
823 bars = pci_select_bars(pdev, IORESOURCE_MEM);
824 err = pci_enable_device_mem(pdev);
829 if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) &&
830 !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
833 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
835 err = dma_set_coherent_mask(&pdev->dev,
838 pr_err("No usable DMA config, aborting\n");
845 err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
849 pci_set_master(pdev);
850 err = pci_save_state(pdev);
852 goto err_alloc_etherdev;
855 netdev = alloc_etherdev(sizeof(struct e1000_adapter));
857 goto err_alloc_etherdev;
859 SET_NETDEV_DEV(netdev, &pdev->dev);
861 pci_set_drvdata(pdev, netdev);
862 adapter = netdev_priv(netdev);
863 adapter->netdev = netdev;
864 adapter->pdev = pdev;
865 adapter->msg_enable = (1 << debug) - 1;
866 adapter->bars = bars;
867 adapter->need_ioport = need_ioport;
873 hw->hw_addr = pci_ioremap_bar(pdev, BAR_0);
877 if (adapter->need_ioport) {
878 for (i = BAR_1; i <= BAR_5; i++) {
879 if (pci_resource_len(pdev, i) == 0)
881 if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
882 hw->io_base = pci_resource_start(pdev, i);
888 netdev->netdev_ops = &e1000_netdev_ops;
889 e1000_set_ethtool_ops(netdev);
890 netdev->watchdog_timeo = 5 * HZ;
891 netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
893 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
895 adapter->bd_number = cards_found;
897 /* setup the private structure */
899 err = e1000_sw_init(adapter);
905 if (hw->mac_type >= e1000_82543) {
906 netdev->features = NETIF_F_SG |
910 NETIF_F_HW_VLAN_FILTER;
913 if ((hw->mac_type >= e1000_82544) &&
914 (hw->mac_type != e1000_82547))
915 netdev->features |= NETIF_F_TSO;
918 netdev->features |= NETIF_F_HIGHDMA;
920 netdev->vlan_features |= NETIF_F_TSO;
921 netdev->vlan_features |= NETIF_F_HW_CSUM;
922 netdev->vlan_features |= NETIF_F_SG;
924 adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
926 /* initialize eeprom parameters */
927 if (e1000_init_eeprom_params(hw)) {
928 e_err("EEPROM initialization failed\n");
932 /* before reading the EEPROM, reset the controller to
933 * put the device in a known good starting state */
937 /* make sure the EEPROM is good */
938 if (e1000_validate_eeprom_checksum(hw) < 0) {
939 e_err("The EEPROM Checksum Is Not Valid\n");
940 e1000_dump_eeprom(adapter);
942 * set MAC address to all zeroes to invalidate and temporary
943 * disable this device for the user. This blocks regular
944 * traffic while still permitting ethtool ioctls from reaching
945 * the hardware as well as allowing the user to run the
946 * interface after manually setting a hw addr using
949 memset(hw->mac_addr, 0, netdev->addr_len);
951 /* copy the MAC address out of the EEPROM */
952 if (e1000_read_mac_addr(hw))
953 e_err("EEPROM Read Error\n");
955 /* don't block initalization here due to bad MAC address */
956 memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
957 memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
959 if (!is_valid_ether_addr(netdev->perm_addr))
960 e_err("Invalid MAC Address\n");
962 e1000_get_bus_info(hw);
964 init_timer(&adapter->tx_fifo_stall_timer);
965 adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
966 adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
968 init_timer(&adapter->watchdog_timer);
969 adapter->watchdog_timer.function = &e1000_watchdog;
970 adapter->watchdog_timer.data = (unsigned long) adapter;
972 init_timer(&adapter->phy_info_timer);
973 adapter->phy_info_timer.function = &e1000_update_phy_info;
974 adapter->phy_info_timer.data = (unsigned long)adapter;
976 INIT_WORK(&adapter->reset_task, e1000_reset_task);
978 e1000_check_options(adapter);
980 /* Initial Wake on LAN setting
981 * If APM wake is enabled in the EEPROM,
982 * enable the ACPI Magic Packet filter
985 switch (hw->mac_type) {
986 case e1000_82542_rev2_0:
987 case e1000_82542_rev2_1:
991 e1000_read_eeprom(hw,
992 EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
993 eeprom_apme_mask = E1000_EEPROM_82544_APM;
996 case e1000_82546_rev_3:
997 if (er32(STATUS) & E1000_STATUS_FUNC_1){
998 e1000_read_eeprom(hw,
999 EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
1004 e1000_read_eeprom(hw,
1005 EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
1008 if (eeprom_data & eeprom_apme_mask)
1009 adapter->eeprom_wol |= E1000_WUFC_MAG;
1011 /* now that we have the eeprom settings, apply the special cases
1012 * where the eeprom may be wrong or the board simply won't support
1013 * wake on lan on a particular port */
1014 switch (pdev->device) {
1015 case E1000_DEV_ID_82546GB_PCIE:
1016 adapter->eeprom_wol = 0;
1018 case E1000_DEV_ID_82546EB_FIBER:
1019 case E1000_DEV_ID_82546GB_FIBER:
1020 /* Wake events only supported on port A for dual fiber
1021 * regardless of eeprom setting */
1022 if (er32(STATUS) & E1000_STATUS_FUNC_1)
1023 adapter->eeprom_wol = 0;
1025 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
1026 /* if quad port adapter, disable WoL on all but port A */
1027 if (global_quad_port_a != 0)
1028 adapter->eeprom_wol = 0;
1030 adapter->quad_port_a = 1;
1031 /* Reset for multiple quad port adapters */
1032 if (++global_quad_port_a == 4)
1033 global_quad_port_a = 0;
1037 /* initialize the wol settings based on the eeprom settings */
1038 adapter->wol = adapter->eeprom_wol;
1039 device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
1041 /* reset the hardware with the new settings */
1042 e1000_reset(adapter);
1044 strcpy(netdev->name, "eth%d");
1045 err = register_netdev(netdev);
1049 /* print bus type/speed/width info */
1050 e_info("(PCI%s:%dMHz:%d-bit) %pM\n",
1051 ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
1052 ((hw->bus_speed == e1000_bus_speed_133) ? 133 :
1053 (hw->bus_speed == e1000_bus_speed_120) ? 120 :
1054 (hw->bus_speed == e1000_bus_speed_100) ? 100 :
1055 (hw->bus_speed == e1000_bus_speed_66) ? 66 : 33),
1056 ((hw->bus_width == e1000_bus_width_64) ? 64 : 32),
1059 /* carrier off reporting is important to ethtool even BEFORE open */
1060 netif_carrier_off(netdev);
1062 e_info("Intel(R) PRO/1000 Network Connection\n");
1069 e1000_phy_hw_reset(hw);
1071 if (hw->flash_address)
1072 iounmap(hw->flash_address);
1073 kfree(adapter->tx_ring);
1074 kfree(adapter->rx_ring);
1076 iounmap(hw->hw_addr);
1078 free_netdev(netdev);
1080 pci_release_selected_regions(pdev, bars);
1083 pci_disable_device(pdev);
1088 * e1000_remove - Device Removal Routine
1089 * @pdev: PCI device information struct
1091 * e1000_remove is called by the PCI subsystem to alert the driver
1092 * that it should release a PCI device. The could be caused by a
1093 * Hot-Plug event, or because the driver is going to be removed from
1097 static void __devexit e1000_remove(struct pci_dev *pdev)
1099 struct net_device *netdev = pci_get_drvdata(pdev);
1100 struct e1000_adapter *adapter = netdev_priv(netdev);
1101 struct e1000_hw *hw = &adapter->hw;
1103 set_bit(__E1000_DOWN, &adapter->flags);
1104 del_timer_sync(&adapter->tx_fifo_stall_timer);
1105 del_timer_sync(&adapter->watchdog_timer);
1106 del_timer_sync(&adapter->phy_info_timer);
1108 cancel_work_sync(&adapter->reset_task);
1110 e1000_release_manageability(adapter);
1112 unregister_netdev(netdev);
1114 e1000_phy_hw_reset(hw);
1116 kfree(adapter->tx_ring);
1117 kfree(adapter->rx_ring);
1119 iounmap(hw->hw_addr);
1120 if (hw->flash_address)
1121 iounmap(hw->flash_address);
1122 pci_release_selected_regions(pdev, adapter->bars);
1124 free_netdev(netdev);
1126 pci_disable_device(pdev);
1130 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1131 * @adapter: board private structure to initialize
1133 * e1000_sw_init initializes the Adapter private data structure.
1134 * Fields are initialized based on PCI device information and
1135 * OS network device settings (MTU size).
1138 static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
1140 struct e1000_hw *hw = &adapter->hw;
1141 struct net_device *netdev = adapter->netdev;
1142 struct pci_dev *pdev = adapter->pdev;
1144 /* PCI config space info */
1146 hw->vendor_id = pdev->vendor;
1147 hw->device_id = pdev->device;
1148 hw->subsystem_vendor_id = pdev->subsystem_vendor;
1149 hw->subsystem_id = pdev->subsystem_device;
1150 hw->revision_id = pdev->revision;
1152 pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
1154 adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
1155 hw->max_frame_size = netdev->mtu +
1156 ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
1157 hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
1159 /* identify the MAC */
1161 if (e1000_set_mac_type(hw)) {
1162 e_err("Unknown MAC Type\n");
1166 switch (hw->mac_type) {
1171 case e1000_82541_rev_2:
1172 case e1000_82547_rev_2:
1173 hw->phy_init_script = 1;
1177 e1000_set_media_type(hw);
1179 hw->wait_autoneg_complete = false;
1180 hw->tbi_compatibility_en = true;
1181 hw->adaptive_ifs = true;
1183 /* Copper options */
1185 if (hw->media_type == e1000_media_type_copper) {
1186 hw->mdix = AUTO_ALL_MODES;
1187 hw->disable_polarity_correction = false;
1188 hw->master_slave = E1000_MASTER_SLAVE;
1191 adapter->num_tx_queues = 1;
1192 adapter->num_rx_queues = 1;
1194 if (e1000_alloc_queues(adapter)) {
1195 e_err("Unable to allocate memory for queues\n");
1199 /* Explicitly disable IRQ since the NIC can be in any state. */
1200 e1000_irq_disable(adapter);
1202 spin_lock_init(&adapter->stats_lock);
1204 set_bit(__E1000_DOWN, &adapter->flags);
1210 * e1000_alloc_queues - Allocate memory for all rings
1211 * @adapter: board private structure to initialize
1213 * We allocate one ring per queue at run-time since we don't know the
1214 * number of queues at compile-time.
1217 static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
1219 adapter->tx_ring = kcalloc(adapter->num_tx_queues,
1220 sizeof(struct e1000_tx_ring), GFP_KERNEL);
1221 if (!adapter->tx_ring)
1224 adapter->rx_ring = kcalloc(adapter->num_rx_queues,
1225 sizeof(struct e1000_rx_ring), GFP_KERNEL);
1226 if (!adapter->rx_ring) {
1227 kfree(adapter->tx_ring);
1231 return E1000_SUCCESS;
1235 * e1000_open - Called when a network interface is made active
1236 * @netdev: network interface device structure
1238 * Returns 0 on success, negative value on failure
1240 * The open entry point is called when a network interface is made
1241 * active by the system (IFF_UP). At this point all resources needed
1242 * for transmit and receive operations are allocated, the interrupt
1243 * handler is registered with the OS, the watchdog timer is started,
1244 * and the stack is notified that the interface is ready.
1247 static int e1000_open(struct net_device *netdev)
1249 struct e1000_adapter *adapter = netdev_priv(netdev);
1250 struct e1000_hw *hw = &adapter->hw;
1253 /* disallow open during test */
1254 if (test_bit(__E1000_TESTING, &adapter->flags))
1257 netif_carrier_off(netdev);
1259 /* allocate transmit descriptors */
1260 err = e1000_setup_all_tx_resources(adapter);
1264 /* allocate receive descriptors */
1265 err = e1000_setup_all_rx_resources(adapter);
1269 e1000_power_up_phy(adapter);
1271 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
1272 if ((hw->mng_cookie.status &
1273 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
1274 e1000_update_mng_vlan(adapter);
1277 /* before we allocate an interrupt, we must be ready to handle it.
1278 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
1279 * as soon as we call pci_request_irq, so we have to setup our
1280 * clean_rx handler before we do so. */
1281 e1000_configure(adapter);
1283 err = e1000_request_irq(adapter);
1287 /* From here on the code is the same as e1000_up() */
1288 clear_bit(__E1000_DOWN, &adapter->flags);
1290 napi_enable(&adapter->napi);
1292 e1000_irq_enable(adapter);
1294 netif_start_queue(netdev);
1296 /* fire a link status change interrupt to start the watchdog */
1297 ew32(ICS, E1000_ICS_LSC);
1299 return E1000_SUCCESS;
1302 e1000_power_down_phy(adapter);
1303 e1000_free_all_rx_resources(adapter);
1305 e1000_free_all_tx_resources(adapter);
1307 e1000_reset(adapter);
1313 * e1000_close - Disables a network interface
1314 * @netdev: network interface device structure
1316 * Returns 0, this is not allowed to fail
1318 * The close entry point is called when an interface is de-activated
1319 * by the OS. The hardware is still under the drivers control, but
1320 * needs to be disabled. A global MAC reset is issued to stop the
1321 * hardware, and all transmit and receive resources are freed.
1324 static int e1000_close(struct net_device *netdev)
1326 struct e1000_adapter *adapter = netdev_priv(netdev);
1327 struct e1000_hw *hw = &adapter->hw;
1329 WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
1330 e1000_down(adapter);
1331 e1000_power_down_phy(adapter);
1332 e1000_free_irq(adapter);
1334 e1000_free_all_tx_resources(adapter);
1335 e1000_free_all_rx_resources(adapter);
1337 /* kill manageability vlan ID if supported, but not if a vlan with
1338 * the same ID is registered on the host OS (let 8021q kill it) */
1339 if ((hw->mng_cookie.status &
1340 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
1342 vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
1343 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
1350 * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1351 * @adapter: address of board private structure
1352 * @start: address of beginning of memory
1353 * @len: length of memory
1355 static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
1358 struct e1000_hw *hw = &adapter->hw;
1359 unsigned long begin = (unsigned long)start;
1360 unsigned long end = begin + len;
1362 /* First rev 82545 and 82546 need to not allow any memory
1363 * write location to cross 64k boundary due to errata 23 */
1364 if (hw->mac_type == e1000_82545 ||
1365 hw->mac_type == e1000_82546) {
1366 return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
1373 * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1374 * @adapter: board private structure
1375 * @txdr: tx descriptor ring (for a specific queue) to setup
1377 * Return 0 on success, negative on failure
1380 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
1381 struct e1000_tx_ring *txdr)
1383 struct pci_dev *pdev = adapter->pdev;
1386 size = sizeof(struct e1000_buffer) * txdr->count;
1387 txdr->buffer_info = vmalloc(size);
1388 if (!txdr->buffer_info) {
1389 e_err("Unable to allocate memory for the Tx descriptor ring\n");
1392 memset(txdr->buffer_info, 0, size);
1394 /* round up to nearest 4K */
1396 txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
1397 txdr->size = ALIGN(txdr->size, 4096);
1399 txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
1403 vfree(txdr->buffer_info);
1404 e_err("Unable to allocate memory for the Tx descriptor ring\n");
1408 /* Fix for errata 23, can't cross 64kB boundary */
1409 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1410 void *olddesc = txdr->desc;
1411 dma_addr_t olddma = txdr->dma;
1412 e_err("txdr align check failed: %u bytes at %p\n",
1413 txdr->size, txdr->desc);
1414 /* Try again, without freeing the previous */
1415 txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size,
1416 &txdr->dma, GFP_KERNEL);
1417 /* Failed allocation, critical failure */
1419 dma_free_coherent(&pdev->dev, txdr->size, olddesc,
1421 goto setup_tx_desc_die;
1424 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1426 dma_free_coherent(&pdev->dev, txdr->size, txdr->desc,
1428 dma_free_coherent(&pdev->dev, txdr->size, olddesc,
1430 e_err("Unable to allocate aligned memory "
1431 "for the transmit descriptor ring\n");
1432 vfree(txdr->buffer_info);
1435 /* Free old allocation, new allocation was successful */
1436 dma_free_coherent(&pdev->dev, txdr->size, olddesc,
1440 memset(txdr->desc, 0, txdr->size);
1442 txdr->next_to_use = 0;
1443 txdr->next_to_clean = 0;
1449 * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1450 * (Descriptors) for all queues
1451 * @adapter: board private structure
1453 * Return 0 on success, negative on failure
1456 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
1460 for (i = 0; i < adapter->num_tx_queues; i++) {
1461 err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
1463 e_err("Allocation for Tx Queue %u failed\n", i);
1464 for (i-- ; i >= 0; i--)
1465 e1000_free_tx_resources(adapter,
1466 &adapter->tx_ring[i]);
1475 * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1476 * @adapter: board private structure
1478 * Configure the Tx unit of the MAC after a reset.
1481 static void e1000_configure_tx(struct e1000_adapter *adapter)
1484 struct e1000_hw *hw = &adapter->hw;
1485 u32 tdlen, tctl, tipg;
1488 /* Setup the HW Tx Head and Tail descriptor pointers */
1490 switch (adapter->num_tx_queues) {
1493 tdba = adapter->tx_ring[0].dma;
1494 tdlen = adapter->tx_ring[0].count *
1495 sizeof(struct e1000_tx_desc);
1497 ew32(TDBAH, (tdba >> 32));
1498 ew32(TDBAL, (tdba & 0x00000000ffffffffULL));
1501 adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
1502 adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
1506 /* Set the default values for the Tx Inter Packet Gap timer */
1507 if ((hw->media_type == e1000_media_type_fiber ||
1508 hw->media_type == e1000_media_type_internal_serdes))
1509 tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
1511 tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
1513 switch (hw->mac_type) {
1514 case e1000_82542_rev2_0:
1515 case e1000_82542_rev2_1:
1516 tipg = DEFAULT_82542_TIPG_IPGT;
1517 ipgr1 = DEFAULT_82542_TIPG_IPGR1;
1518 ipgr2 = DEFAULT_82542_TIPG_IPGR2;
1521 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1522 ipgr2 = DEFAULT_82543_TIPG_IPGR2;
1525 tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
1526 tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
1529 /* Set the Tx Interrupt Delay register */
1531 ew32(TIDV, adapter->tx_int_delay);
1532 if (hw->mac_type >= e1000_82540)
1533 ew32(TADV, adapter->tx_abs_int_delay);
1535 /* Program the Transmit Control Register */
1538 tctl &= ~E1000_TCTL_CT;
1539 tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
1540 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
1542 e1000_config_collision_dist(hw);
1544 /* Setup Transmit Descriptor Settings for eop descriptor */
1545 adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
1547 /* only set IDE if we are delaying interrupts using the timers */
1548 if (adapter->tx_int_delay)
1549 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
1551 if (hw->mac_type < e1000_82543)
1552 adapter->txd_cmd |= E1000_TXD_CMD_RPS;
1554 adapter->txd_cmd |= E1000_TXD_CMD_RS;
1556 /* Cache if we're 82544 running in PCI-X because we'll
1557 * need this to apply a workaround later in the send path. */
1558 if (hw->mac_type == e1000_82544 &&
1559 hw->bus_type == e1000_bus_type_pcix)
1560 adapter->pcix_82544 = 1;
1567 * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1568 * @adapter: board private structure
1569 * @rxdr: rx descriptor ring (for a specific queue) to setup
1571 * Returns 0 on success, negative on failure
1574 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
1575 struct e1000_rx_ring *rxdr)
1577 struct pci_dev *pdev = adapter->pdev;
1580 size = sizeof(struct e1000_buffer) * rxdr->count;
1581 rxdr->buffer_info = vmalloc(size);
1582 if (!rxdr->buffer_info) {
1583 e_err("Unable to allocate memory for the Rx descriptor ring\n");
1586 memset(rxdr->buffer_info, 0, size);
1588 desc_len = sizeof(struct e1000_rx_desc);
1590 /* Round up to nearest 4K */
1592 rxdr->size = rxdr->count * desc_len;
1593 rxdr->size = ALIGN(rxdr->size, 4096);
1595 rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
1599 e_err("Unable to allocate memory for the Rx descriptor ring\n");
1601 vfree(rxdr->buffer_info);
1605 /* Fix for errata 23, can't cross 64kB boundary */
1606 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1607 void *olddesc = rxdr->desc;
1608 dma_addr_t olddma = rxdr->dma;
1609 e_err("rxdr align check failed: %u bytes at %p\n",
1610 rxdr->size, rxdr->desc);
1611 /* Try again, without freeing the previous */
1612 rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size,
1613 &rxdr->dma, GFP_KERNEL);
1614 /* Failed allocation, critical failure */
1616 dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
1618 e_err("Unable to allocate memory for the Rx descriptor "
1620 goto setup_rx_desc_die;
1623 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1625 dma_free_coherent(&pdev->dev, rxdr->size, rxdr->desc,
1627 dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
1629 e_err("Unable to allocate aligned memory for the Rx "
1630 "descriptor ring\n");
1631 goto setup_rx_desc_die;
1633 /* Free old allocation, new allocation was successful */
1634 dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
1638 memset(rxdr->desc, 0, rxdr->size);
1640 rxdr->next_to_clean = 0;
1641 rxdr->next_to_use = 0;
1642 rxdr->rx_skb_top = NULL;
1648 * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1649 * (Descriptors) for all queues
1650 * @adapter: board private structure
1652 * Return 0 on success, negative on failure
1655 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
1659 for (i = 0; i < adapter->num_rx_queues; i++) {
1660 err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
1662 e_err("Allocation for Rx Queue %u failed\n", i);
1663 for (i-- ; i >= 0; i--)
1664 e1000_free_rx_resources(adapter,
1665 &adapter->rx_ring[i]);
1674 * e1000_setup_rctl - configure the receive control registers
1675 * @adapter: Board private structure
1677 static void e1000_setup_rctl(struct e1000_adapter *adapter)
1679 struct e1000_hw *hw = &adapter->hw;
1684 rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
1686 rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
1687 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1688 (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
1690 if (hw->tbi_compatibility_on == 1)
1691 rctl |= E1000_RCTL_SBP;
1693 rctl &= ~E1000_RCTL_SBP;
1695 if (adapter->netdev->mtu <= ETH_DATA_LEN)
1696 rctl &= ~E1000_RCTL_LPE;
1698 rctl |= E1000_RCTL_LPE;
1700 /* Setup buffer sizes */
1701 rctl &= ~E1000_RCTL_SZ_4096;
1702 rctl |= E1000_RCTL_BSEX;
1703 switch (adapter->rx_buffer_len) {
1704 case E1000_RXBUFFER_2048:
1706 rctl |= E1000_RCTL_SZ_2048;
1707 rctl &= ~E1000_RCTL_BSEX;
1709 case E1000_RXBUFFER_4096:
1710 rctl |= E1000_RCTL_SZ_4096;
1712 case E1000_RXBUFFER_8192:
1713 rctl |= E1000_RCTL_SZ_8192;
1715 case E1000_RXBUFFER_16384:
1716 rctl |= E1000_RCTL_SZ_16384;
1724 * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1725 * @adapter: board private structure
1727 * Configure the Rx unit of the MAC after a reset.
1730 static void e1000_configure_rx(struct e1000_adapter *adapter)
1733 struct e1000_hw *hw = &adapter->hw;
1734 u32 rdlen, rctl, rxcsum;
1736 if (adapter->netdev->mtu > ETH_DATA_LEN) {
1737 rdlen = adapter->rx_ring[0].count *
1738 sizeof(struct e1000_rx_desc);
1739 adapter->clean_rx = e1000_clean_jumbo_rx_irq;
1740 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
1742 rdlen = adapter->rx_ring[0].count *
1743 sizeof(struct e1000_rx_desc);
1744 adapter->clean_rx = e1000_clean_rx_irq;
1745 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
1748 /* disable receives while setting up the descriptors */
1750 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1752 /* set the Receive Delay Timer Register */
1753 ew32(RDTR, adapter->rx_int_delay);
1755 if (hw->mac_type >= e1000_82540) {
1756 ew32(RADV, adapter->rx_abs_int_delay);
1757 if (adapter->itr_setting != 0)
1758 ew32(ITR, 1000000000 / (adapter->itr * 256));
1761 /* Setup the HW Rx Head and Tail Descriptor Pointers and
1762 * the Base and Length of the Rx Descriptor Ring */
1763 switch (adapter->num_rx_queues) {
1766 rdba = adapter->rx_ring[0].dma;
1768 ew32(RDBAH, (rdba >> 32));
1769 ew32(RDBAL, (rdba & 0x00000000ffffffffULL));
1772 adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
1773 adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
1777 /* Enable 82543 Receive Checksum Offload for TCP and UDP */
1778 if (hw->mac_type >= e1000_82543) {
1779 rxcsum = er32(RXCSUM);
1780 if (adapter->rx_csum)
1781 rxcsum |= E1000_RXCSUM_TUOFL;
1783 /* don't need to clear IPPCSE as it defaults to 0 */
1784 rxcsum &= ~E1000_RXCSUM_TUOFL;
1785 ew32(RXCSUM, rxcsum);
1788 /* Enable Receives */
1793 * e1000_free_tx_resources - Free Tx Resources per Queue
1794 * @adapter: board private structure
1795 * @tx_ring: Tx descriptor ring for a specific queue
1797 * Free all transmit software resources
1800 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
1801 struct e1000_tx_ring *tx_ring)
1803 struct pci_dev *pdev = adapter->pdev;
1805 e1000_clean_tx_ring(adapter, tx_ring);
1807 vfree(tx_ring->buffer_info);
1808 tx_ring->buffer_info = NULL;
1810 dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
1813 tx_ring->desc = NULL;
1817 * e1000_free_all_tx_resources - Free Tx Resources for All Queues
1818 * @adapter: board private structure
1820 * Free all transmit software resources
1823 void e1000_free_all_tx_resources(struct e1000_adapter *adapter)
1827 for (i = 0; i < adapter->num_tx_queues; i++)
1828 e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
1831 static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
1832 struct e1000_buffer *buffer_info)
1834 if (buffer_info->dma) {
1835 if (buffer_info->mapped_as_page)
1836 dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
1837 buffer_info->length, DMA_TO_DEVICE);
1839 dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
1840 buffer_info->length,
1842 buffer_info->dma = 0;
1844 if (buffer_info->skb) {
1845 dev_kfree_skb_any(buffer_info->skb);
1846 buffer_info->skb = NULL;
1848 buffer_info->time_stamp = 0;
1849 /* buffer_info must be completely set up in the transmit path */
1853 * e1000_clean_tx_ring - Free Tx Buffers
1854 * @adapter: board private structure
1855 * @tx_ring: ring to be cleaned
1858 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
1859 struct e1000_tx_ring *tx_ring)
1861 struct e1000_hw *hw = &adapter->hw;
1862 struct e1000_buffer *buffer_info;
1866 /* Free all the Tx ring sk_buffs */
1868 for (i = 0; i < tx_ring->count; i++) {
1869 buffer_info = &tx_ring->buffer_info[i];
1870 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
1873 size = sizeof(struct e1000_buffer) * tx_ring->count;
1874 memset(tx_ring->buffer_info, 0, size);
1876 /* Zero out the descriptor ring */
1878 memset(tx_ring->desc, 0, tx_ring->size);
1880 tx_ring->next_to_use = 0;
1881 tx_ring->next_to_clean = 0;
1882 tx_ring->last_tx_tso = 0;
1884 writel(0, hw->hw_addr + tx_ring->tdh);
1885 writel(0, hw->hw_addr + tx_ring->tdt);
1889 * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
1890 * @adapter: board private structure
1893 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
1897 for (i = 0; i < adapter->num_tx_queues; i++)
1898 e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
1902 * e1000_free_rx_resources - Free Rx Resources
1903 * @adapter: board private structure
1904 * @rx_ring: ring to clean the resources from
1906 * Free all receive software resources
1909 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
1910 struct e1000_rx_ring *rx_ring)
1912 struct pci_dev *pdev = adapter->pdev;
1914 e1000_clean_rx_ring(adapter, rx_ring);
1916 vfree(rx_ring->buffer_info);
1917 rx_ring->buffer_info = NULL;
1919 dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
1922 rx_ring->desc = NULL;
1926 * e1000_free_all_rx_resources - Free Rx Resources for All Queues
1927 * @adapter: board private structure
1929 * Free all receive software resources
1932 void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
1936 for (i = 0; i < adapter->num_rx_queues; i++)
1937 e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
1941 * e1000_clean_rx_ring - Free Rx Buffers per Queue
1942 * @adapter: board private structure
1943 * @rx_ring: ring to free buffers from
1946 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
1947 struct e1000_rx_ring *rx_ring)
1949 struct e1000_hw *hw = &adapter->hw;
1950 struct e1000_buffer *buffer_info;
1951 struct pci_dev *pdev = adapter->pdev;
1955 /* Free all the Rx ring sk_buffs */
1956 for (i = 0; i < rx_ring->count; i++) {
1957 buffer_info = &rx_ring->buffer_info[i];
1958 if (buffer_info->dma &&
1959 adapter->clean_rx == e1000_clean_rx_irq) {
1960 dma_unmap_single(&pdev->dev, buffer_info->dma,
1961 buffer_info->length,
1963 } else if (buffer_info->dma &&
1964 adapter->clean_rx == e1000_clean_jumbo_rx_irq) {
1965 dma_unmap_page(&pdev->dev, buffer_info->dma,
1966 buffer_info->length,
1970 buffer_info->dma = 0;
1971 if (buffer_info->page) {
1972 put_page(buffer_info->page);
1973 buffer_info->page = NULL;
1975 if (buffer_info->skb) {
1976 dev_kfree_skb(buffer_info->skb);
1977 buffer_info->skb = NULL;
1981 /* there also may be some cached data from a chained receive */
1982 if (rx_ring->rx_skb_top) {
1983 dev_kfree_skb(rx_ring->rx_skb_top);
1984 rx_ring->rx_skb_top = NULL;
1987 size = sizeof(struct e1000_buffer) * rx_ring->count;
1988 memset(rx_ring->buffer_info, 0, size);
1990 /* Zero out the descriptor ring */
1991 memset(rx_ring->desc, 0, rx_ring->size);
1993 rx_ring->next_to_clean = 0;
1994 rx_ring->next_to_use = 0;
1996 writel(0, hw->hw_addr + rx_ring->rdh);
1997 writel(0, hw->hw_addr + rx_ring->rdt);
2001 * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2002 * @adapter: board private structure
2005 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
2009 for (i = 0; i < adapter->num_rx_queues; i++)
2010 e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
2013 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2014 * and memory write and invalidate disabled for certain operations
2016 static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
2018 struct e1000_hw *hw = &adapter->hw;
2019 struct net_device *netdev = adapter->netdev;
2022 e1000_pci_clear_mwi(hw);
2025 rctl |= E1000_RCTL_RST;
2027 E1000_WRITE_FLUSH();
2030 if (netif_running(netdev))
2031 e1000_clean_all_rx_rings(adapter);
2034 static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
2036 struct e1000_hw *hw = &adapter->hw;
2037 struct net_device *netdev = adapter->netdev;
2041 rctl &= ~E1000_RCTL_RST;
2043 E1000_WRITE_FLUSH();
2046 if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
2047 e1000_pci_set_mwi(hw);
2049 if (netif_running(netdev)) {
2050 /* No need to loop, because 82542 supports only 1 queue */
2051 struct e1000_rx_ring *ring = &adapter->rx_ring[0];
2052 e1000_configure_rx(adapter);
2053 adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
2058 * e1000_set_mac - Change the Ethernet Address of the NIC
2059 * @netdev: network interface device structure
2060 * @p: pointer to an address structure
2062 * Returns 0 on success, negative on failure
2065 static int e1000_set_mac(struct net_device *netdev, void *p)
2067 struct e1000_adapter *adapter = netdev_priv(netdev);
2068 struct e1000_hw *hw = &adapter->hw;
2069 struct sockaddr *addr = p;
2071 if (!is_valid_ether_addr(addr->sa_data))
2072 return -EADDRNOTAVAIL;
2074 /* 82542 2.0 needs to be in reset to write receive address registers */
2076 if (hw->mac_type == e1000_82542_rev2_0)
2077 e1000_enter_82542_rst(adapter);
2079 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
2080 memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len);
2082 e1000_rar_set(hw, hw->mac_addr, 0);
2084 if (hw->mac_type == e1000_82542_rev2_0)
2085 e1000_leave_82542_rst(adapter);
2091 * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
2092 * @netdev: network interface device structure
2094 * The set_rx_mode entry point is called whenever the unicast or multicast
2095 * address lists or the network interface flags are updated. This routine is
2096 * responsible for configuring the hardware for proper unicast, multicast,
2097 * promiscuous mode, and all-multi behavior.
2100 static void e1000_set_rx_mode(struct net_device *netdev)
2102 struct e1000_adapter *adapter = netdev_priv(netdev);
2103 struct e1000_hw *hw = &adapter->hw;
2104 struct netdev_hw_addr *ha;
2105 bool use_uc = false;
2108 int i, rar_entries = E1000_RAR_ENTRIES;
2109 int mta_reg_count = E1000_NUM_MTA_REGISTERS;
2110 u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
2113 e_err("memory allocation failed\n");
2117 /* Check for Promiscuous and All Multicast modes */
2121 if (netdev->flags & IFF_PROMISC) {
2122 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2123 rctl &= ~E1000_RCTL_VFE;
2125 if (netdev->flags & IFF_ALLMULTI)
2126 rctl |= E1000_RCTL_MPE;
2128 rctl &= ~E1000_RCTL_MPE;
2129 /* Enable VLAN filter if there is a VLAN */
2131 rctl |= E1000_RCTL_VFE;
2134 if (netdev_uc_count(netdev) > rar_entries - 1) {
2135 rctl |= E1000_RCTL_UPE;
2136 } else if (!(netdev->flags & IFF_PROMISC)) {
2137 rctl &= ~E1000_RCTL_UPE;
2143 /* 82542 2.0 needs to be in reset to write receive address registers */
2145 if (hw->mac_type == e1000_82542_rev2_0)
2146 e1000_enter_82542_rst(adapter);
2148 /* load the first 14 addresses into the exact filters 1-14. Unicast
2149 * addresses take precedence to avoid disabling unicast filtering
2152 * RAR 0 is used for the station MAC adddress
2153 * if there are not 14 addresses, go ahead and clear the filters
2157 netdev_for_each_uc_addr(ha, netdev) {
2158 if (i == rar_entries)
2160 e1000_rar_set(hw, ha->addr, i++);
2163 netdev_for_each_mc_addr(ha, netdev) {
2164 if (i == rar_entries) {
2165 /* load any remaining addresses into the hash table */
2166 u32 hash_reg, hash_bit, mta;
2167 hash_value = e1000_hash_mc_addr(hw, ha->addr);
2168 hash_reg = (hash_value >> 5) & 0x7F;
2169 hash_bit = hash_value & 0x1F;
2170 mta = (1 << hash_bit);
2171 mcarray[hash_reg] |= mta;
2173 e1000_rar_set(hw, ha->addr, i++);
2177 for (; i < rar_entries; i++) {
2178 E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
2179 E1000_WRITE_FLUSH();
2180 E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
2181 E1000_WRITE_FLUSH();
2184 /* write the hash table completely, write from bottom to avoid
2185 * both stupid write combining chipsets, and flushing each write */
2186 for (i = mta_reg_count - 1; i >= 0 ; i--) {
2188 * If we are on an 82544 has an errata where writing odd
2189 * offsets overwrites the previous even offset, but writing
2190 * backwards over the range solves the issue by always
2191 * writing the odd offset first
2193 E1000_WRITE_REG_ARRAY(hw, MTA, i, mcarray[i]);
2195 E1000_WRITE_FLUSH();
2197 if (hw->mac_type == e1000_82542_rev2_0)
2198 e1000_leave_82542_rst(adapter);
2203 /* Need to wait a few seconds after link up to get diagnostic information from
2206 static void e1000_update_phy_info(unsigned long data)
2208 struct e1000_adapter *adapter = (struct e1000_adapter *)data;
2209 struct e1000_hw *hw = &adapter->hw;
2210 e1000_phy_get_info(hw, &adapter->phy_info);
2214 * e1000_82547_tx_fifo_stall - Timer Call-back
2215 * @data: pointer to adapter cast into an unsigned long
2218 static void e1000_82547_tx_fifo_stall(unsigned long data)
2220 struct e1000_adapter *adapter = (struct e1000_adapter *)data;
2221 struct e1000_hw *hw = &adapter->hw;
2222 struct net_device *netdev = adapter->netdev;
2225 if (atomic_read(&adapter->tx_fifo_stall)) {
2226 if ((er32(TDT) == er32(TDH)) &&
2227 (er32(TDFT) == er32(TDFH)) &&
2228 (er32(TDFTS) == er32(TDFHS))) {
2230 ew32(TCTL, tctl & ~E1000_TCTL_EN);
2231 ew32(TDFT, adapter->tx_head_addr);
2232 ew32(TDFH, adapter->tx_head_addr);
2233 ew32(TDFTS, adapter->tx_head_addr);
2234 ew32(TDFHS, adapter->tx_head_addr);
2236 E1000_WRITE_FLUSH();
2238 adapter->tx_fifo_head = 0;
2239 atomic_set(&adapter->tx_fifo_stall, 0);
2240 netif_wake_queue(netdev);
2241 } else if (!test_bit(__E1000_DOWN, &adapter->flags)) {
2242 mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
2247 bool e1000_has_link(struct e1000_adapter *adapter)
2249 struct e1000_hw *hw = &adapter->hw;
2250 bool link_active = false;
2252 /* get_link_status is set on LSC (link status) interrupt or
2253 * rx sequence error interrupt. get_link_status will stay
2254 * false until the e1000_check_for_link establishes link
2255 * for copper adapters ONLY
2257 switch (hw->media_type) {
2258 case e1000_media_type_copper:
2259 if (hw->get_link_status) {
2260 e1000_check_for_link(hw);
2261 link_active = !hw->get_link_status;
2266 case e1000_media_type_fiber:
2267 e1000_check_for_link(hw);
2268 link_active = !!(er32(STATUS) & E1000_STATUS_LU);
2270 case e1000_media_type_internal_serdes:
2271 e1000_check_for_link(hw);
2272 link_active = hw->serdes_has_link;
2282 * e1000_watchdog - Timer Call-back
2283 * @data: pointer to adapter cast into an unsigned long
2285 static void e1000_watchdog(unsigned long data)
2287 struct e1000_adapter *adapter = (struct e1000_adapter *)data;
2288 struct e1000_hw *hw = &adapter->hw;
2289 struct net_device *netdev = adapter->netdev;
2290 struct e1000_tx_ring *txdr = adapter->tx_ring;
2293 link = e1000_has_link(adapter);
2294 if ((netif_carrier_ok(netdev)) && link)
2298 if (!netif_carrier_ok(netdev)) {
2301 /* update snapshot of PHY registers on LSC */
2302 e1000_get_speed_and_duplex(hw,
2303 &adapter->link_speed,
2304 &adapter->link_duplex);
2307 pr_info("%s NIC Link is Up %d Mbps %s, "
2308 "Flow Control: %s\n",
2310 adapter->link_speed,
2311 adapter->link_duplex == FULL_DUPLEX ?
2312 "Full Duplex" : "Half Duplex",
2313 ((ctrl & E1000_CTRL_TFCE) && (ctrl &
2314 E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
2315 E1000_CTRL_RFCE) ? "RX" : ((ctrl &
2316 E1000_CTRL_TFCE) ? "TX" : "None")));
2318 /* adjust timeout factor according to speed/duplex */
2319 adapter->tx_timeout_factor = 1;
2320 switch (adapter->link_speed) {
2323 adapter->tx_timeout_factor = 16;
2327 /* maybe add some timeout factor ? */
2331 /* enable transmits in the hardware */
2333 tctl |= E1000_TCTL_EN;
2336 netif_carrier_on(netdev);
2337 if (!test_bit(__E1000_DOWN, &adapter->flags))
2338 mod_timer(&adapter->phy_info_timer,
2339 round_jiffies(jiffies + 2 * HZ));
2340 adapter->smartspeed = 0;
2343 if (netif_carrier_ok(netdev)) {
2344 adapter->link_speed = 0;
2345 adapter->link_duplex = 0;
2346 pr_info("%s NIC Link is Down\n",
2348 netif_carrier_off(netdev);
2350 if (!test_bit(__E1000_DOWN, &adapter->flags))
2351 mod_timer(&adapter->phy_info_timer,
2352 round_jiffies(jiffies + 2 * HZ));
2355 e1000_smartspeed(adapter);
2359 e1000_update_stats(adapter);
2361 hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
2362 adapter->tpt_old = adapter->stats.tpt;
2363 hw->collision_delta = adapter->stats.colc - adapter->colc_old;
2364 adapter->colc_old = adapter->stats.colc;
2366 adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
2367 adapter->gorcl_old = adapter->stats.gorcl;
2368 adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
2369 adapter->gotcl_old = adapter->stats.gotcl;
2371 e1000_update_adaptive(hw);
2373 if (!netif_carrier_ok(netdev)) {
2374 if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
2375 /* We've lost link, so the controller stops DMA,
2376 * but we've got queued Tx work that's never going
2377 * to get done, so reset controller to flush Tx.
2378 * (Do the reset outside of interrupt context). */
2379 adapter->tx_timeout_count++;
2380 schedule_work(&adapter->reset_task);
2381 /* return immediately since reset is imminent */
2386 /* Simple mode for Interrupt Throttle Rate (ITR) */
2387 if (hw->mac_type >= e1000_82540 && adapter->itr_setting == 4) {
2389 * Symmetric Tx/Rx gets a reduced ITR=2000;
2390 * Total asymmetrical Tx or Rx gets ITR=8000;
2391 * everyone else is between 2000-8000.
2393 u32 goc = (adapter->gotcl + adapter->gorcl) / 10000;
2394 u32 dif = (adapter->gotcl > adapter->gorcl ?
2395 adapter->gotcl - adapter->gorcl :
2396 adapter->gorcl - adapter->gotcl) / 10000;
2397 u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
2399 ew32(ITR, 1000000000 / (itr * 256));
2402 /* Cause software interrupt to ensure rx ring is cleaned */
2403 ew32(ICS, E1000_ICS_RXDMT0);
2405 /* Force detection of hung controller every watchdog period */
2406 adapter->detect_tx_hung = true;
2408 /* Reset the timer */
2409 if (!test_bit(__E1000_DOWN, &adapter->flags))
2410 mod_timer(&adapter->watchdog_timer,
2411 round_jiffies(jiffies + 2 * HZ));
2414 enum latency_range {
2418 latency_invalid = 255
2422 * e1000_update_itr - update the dynamic ITR value based on statistics
2423 * @adapter: pointer to adapter
2424 * @itr_setting: current adapter->itr
2425 * @packets: the number of packets during this measurement interval
2426 * @bytes: the number of bytes during this measurement interval
2428 * Stores a new ITR value based on packets and byte
2429 * counts during the last interrupt. The advantage of per interrupt
2430 * computation is faster updates and more accurate ITR for the current
2431 * traffic pattern. Constants in this function were computed
2432 * based on theoretical maximum wire speed and thresholds were set based
2433 * on testing data as well as attempting to minimize response time
2434 * while increasing bulk throughput.
2435 * this functionality is controlled by the InterruptThrottleRate module
2436 * parameter (see e1000_param.c)
2438 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
2439 u16 itr_setting, int packets, int bytes)
2441 unsigned int retval = itr_setting;
2442 struct e1000_hw *hw = &adapter->hw;
2444 if (unlikely(hw->mac_type < e1000_82540))
2445 goto update_itr_done;
2448 goto update_itr_done;
2450 switch (itr_setting) {
2451 case lowest_latency:
2452 /* jumbo frames get bulk treatment*/
2453 if (bytes/packets > 8000)
2454 retval = bulk_latency;
2455 else if ((packets < 5) && (bytes > 512))
2456 retval = low_latency;
2458 case low_latency: /* 50 usec aka 20000 ints/s */
2459 if (bytes > 10000) {
2460 /* jumbo frames need bulk latency setting */
2461 if (bytes/packets > 8000)
2462 retval = bulk_latency;
2463 else if ((packets < 10) || ((bytes/packets) > 1200))
2464 retval = bulk_latency;
2465 else if ((packets > 35))
2466 retval = lowest_latency;
2467 } else if (bytes/packets > 2000)
2468 retval = bulk_latency;
2469 else if (packets <= 2 && bytes < 512)
2470 retval = lowest_latency;
2472 case bulk_latency: /* 250 usec aka 4000 ints/s */
2473 if (bytes > 25000) {
2475 retval = low_latency;
2476 } else if (bytes < 6000) {
2477 retval = low_latency;
2486 static void e1000_set_itr(struct e1000_adapter *adapter)
2488 struct e1000_hw *hw = &adapter->hw;
2490 u32 new_itr = adapter->itr;
2492 if (unlikely(hw->mac_type < e1000_82540))
2495 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2496 if (unlikely(adapter->link_speed != SPEED_1000)) {
2502 adapter->tx_itr = e1000_update_itr(adapter,
2504 adapter->total_tx_packets,
2505 adapter->total_tx_bytes);
2506 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2507 if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
2508 adapter->tx_itr = low_latency;
2510 adapter->rx_itr = e1000_update_itr(adapter,
2512 adapter->total_rx_packets,
2513 adapter->total_rx_bytes);
2514 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2515 if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
2516 adapter->rx_itr = low_latency;
2518 current_itr = max(adapter->rx_itr, adapter->tx_itr);
2520 switch (current_itr) {
2521 /* counts and packets in update_itr are dependent on these numbers */
2522 case lowest_latency:
2526 new_itr = 20000; /* aka hwitr = ~200 */
2536 if (new_itr != adapter->itr) {
2537 /* this attempts to bias the interrupt rate towards Bulk
2538 * by adding intermediate steps when interrupt rate is
2540 new_itr = new_itr > adapter->itr ?
2541 min(adapter->itr + (new_itr >> 2), new_itr) :
2543 adapter->itr = new_itr;
2544 ew32(ITR, 1000000000 / (new_itr * 256));
2548 #define E1000_TX_FLAGS_CSUM 0x00000001
2549 #define E1000_TX_FLAGS_VLAN 0x00000002
2550 #define E1000_TX_FLAGS_TSO 0x00000004
2551 #define E1000_TX_FLAGS_IPV4 0x00000008
2552 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
2553 #define E1000_TX_FLAGS_VLAN_SHIFT 16
2555 static int e1000_tso(struct e1000_adapter *adapter,
2556 struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
2558 struct e1000_context_desc *context_desc;
2559 struct e1000_buffer *buffer_info;
2562 u16 ipcse = 0, tucse, mss;
2563 u8 ipcss, ipcso, tucss, tucso, hdr_len;
2566 if (skb_is_gso(skb)) {
2567 if (skb_header_cloned(skb)) {
2568 err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
2573 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
2574 mss = skb_shinfo(skb)->gso_size;
2575 if (skb->protocol == htons(ETH_P_IP)) {
2576 struct iphdr *iph = ip_hdr(skb);
2579 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
2583 cmd_length = E1000_TXD_CMD_IP;
2584 ipcse = skb_transport_offset(skb) - 1;
2585 } else if (skb->protocol == htons(ETH_P_IPV6)) {
2586 ipv6_hdr(skb)->payload_len = 0;
2587 tcp_hdr(skb)->check =
2588 ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
2589 &ipv6_hdr(skb)->daddr,
2593 ipcss = skb_network_offset(skb);
2594 ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
2595 tucss = skb_transport_offset(skb);
2596 tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
2599 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
2600 E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
2602 i = tx_ring->next_to_use;
2603 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2604 buffer_info = &tx_ring->buffer_info[i];
2606 context_desc->lower_setup.ip_fields.ipcss = ipcss;
2607 context_desc->lower_setup.ip_fields.ipcso = ipcso;
2608 context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
2609 context_desc->upper_setup.tcp_fields.tucss = tucss;
2610 context_desc->upper_setup.tcp_fields.tucso = tucso;
2611 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
2612 context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
2613 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
2614 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
2616 buffer_info->time_stamp = jiffies;
2617 buffer_info->next_to_watch = i;
2619 if (++i == tx_ring->count) i = 0;
2620 tx_ring->next_to_use = i;
2627 static bool e1000_tx_csum(struct e1000_adapter *adapter,
2628 struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
2630 struct e1000_context_desc *context_desc;
2631 struct e1000_buffer *buffer_info;
2634 u32 cmd_len = E1000_TXD_CMD_DEXT;
2636 if (skb->ip_summed != CHECKSUM_PARTIAL)
2639 switch (skb->protocol) {
2640 case cpu_to_be16(ETH_P_IP):
2641 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
2642 cmd_len |= E1000_TXD_CMD_TCP;
2644 case cpu_to_be16(ETH_P_IPV6):
2645 /* XXX not handling all IPV6 headers */
2646 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
2647 cmd_len |= E1000_TXD_CMD_TCP;
2650 if (unlikely(net_ratelimit()))
2651 e_warn("checksum_partial proto=%x!\n", skb->protocol);
2655 css = skb_transport_offset(skb);
2657 i = tx_ring->next_to_use;
2658 buffer_info = &tx_ring->buffer_info[i];
2659 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2661 context_desc->lower_setup.ip_config = 0;
2662 context_desc->upper_setup.tcp_fields.tucss = css;
2663 context_desc->upper_setup.tcp_fields.tucso =
2664 css + skb->csum_offset;
2665 context_desc->upper_setup.tcp_fields.tucse = 0;
2666 context_desc->tcp_seg_setup.data = 0;
2667 context_desc->cmd_and_length = cpu_to_le32(cmd_len);
2669 buffer_info->time_stamp = jiffies;
2670 buffer_info->next_to_watch = i;
2672 if (unlikely(++i == tx_ring->count)) i = 0;
2673 tx_ring->next_to_use = i;
2678 #define E1000_MAX_TXD_PWR 12
2679 #define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
2681 static int e1000_tx_map(struct e1000_adapter *adapter,
2682 struct e1000_tx_ring *tx_ring,
2683 struct sk_buff *skb, unsigned int first,
2684 unsigned int max_per_txd, unsigned int nr_frags,
2687 struct e1000_hw *hw = &adapter->hw;
2688 struct pci_dev *pdev = adapter->pdev;
2689 struct e1000_buffer *buffer_info;
2690 unsigned int len = skb_headlen(skb);
2691 unsigned int offset = 0, size, count = 0, i;
2694 i = tx_ring->next_to_use;
2697 buffer_info = &tx_ring->buffer_info[i];
2698 size = min(len, max_per_txd);
2699 /* Workaround for Controller erratum --
2700 * descriptor for non-tso packet in a linear SKB that follows a
2701 * tso gets written back prematurely before the data is fully
2702 * DMA'd to the controller */
2703 if (!skb->data_len && tx_ring->last_tx_tso &&
2705 tx_ring->last_tx_tso = 0;
2709 /* Workaround for premature desc write-backs
2710 * in TSO mode. Append 4-byte sentinel desc */
2711 if (unlikely(mss && !nr_frags && size == len && size > 8))
2713 /* work-around for errata 10 and it applies
2714 * to all controllers in PCI-X mode
2715 * The fix is to make sure that the first descriptor of a
2716 * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
2718 if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
2719 (size > 2015) && count == 0))
2722 /* Workaround for potential 82544 hang in PCI-X. Avoid
2723 * terminating buffers within evenly-aligned dwords. */
2724 if (unlikely(adapter->pcix_82544 &&
2725 !((unsigned long)(skb->data + offset + size - 1) & 4) &&
2729 buffer_info->length = size;
2730 /* set time_stamp *before* dma to help avoid a possible race */
2731 buffer_info->time_stamp = jiffies;
2732 buffer_info->mapped_as_page = false;
2733 buffer_info->dma = dma_map_single(&pdev->dev,
2735 size, DMA_TO_DEVICE);
2736 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
2738 buffer_info->next_to_watch = i;
2745 if (unlikely(i == tx_ring->count))
2750 for (f = 0; f < nr_frags; f++) {
2751 struct skb_frag_struct *frag;
2753 frag = &skb_shinfo(skb)->frags[f];
2755 offset = frag->page_offset;
2759 if (unlikely(i == tx_ring->count))
2762 buffer_info = &tx_ring->buffer_info[i];
2763 size = min(len, max_per_txd);
2764 /* Workaround for premature desc write-backs
2765 * in TSO mode. Append 4-byte sentinel desc */
2766 if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
2768 /* Workaround for potential 82544 hang in PCI-X.
2769 * Avoid terminating buffers within evenly-aligned
2771 if (unlikely(adapter->pcix_82544 &&
2772 !((unsigned long)(page_to_phys(frag->page) + offset
2777 buffer_info->length = size;
2778 buffer_info->time_stamp = jiffies;
2779 buffer_info->mapped_as_page = true;
2780 buffer_info->dma = dma_map_page(&pdev->dev, frag->page,
2783 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
2785 buffer_info->next_to_watch = i;
2793 tx_ring->buffer_info[i].skb = skb;
2794 tx_ring->buffer_info[first].next_to_watch = i;
2799 dev_err(&pdev->dev, "TX DMA map failed\n");
2800 buffer_info->dma = 0;
2806 i += tx_ring->count;
2808 buffer_info = &tx_ring->buffer_info[i];
2809 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
2815 static void e1000_tx_queue(struct e1000_adapter *adapter,
2816 struct e1000_tx_ring *tx_ring, int tx_flags,
2819 struct e1000_hw *hw = &adapter->hw;
2820 struct e1000_tx_desc *tx_desc = NULL;
2821 struct e1000_buffer *buffer_info;
2822 u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
2825 if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
2826 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
2828 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
2830 if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
2831 txd_upper |= E1000_TXD_POPTS_IXSM << 8;
2834 if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
2835 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
2836 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
2839 if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
2840 txd_lower |= E1000_TXD_CMD_VLE;
2841 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
2844 i = tx_ring->next_to_use;
2847 buffer_info = &tx_ring->buffer_info[i];
2848 tx_desc = E1000_TX_DESC(*tx_ring, i);
2849 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
2850 tx_desc->lower.data =
2851 cpu_to_le32(txd_lower | buffer_info->length);
2852 tx_desc->upper.data = cpu_to_le32(txd_upper);
2853 if (unlikely(++i == tx_ring->count)) i = 0;
2856 tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
2858 /* Force memory writes to complete before letting h/w
2859 * know there are new descriptors to fetch. (Only
2860 * applicable for weak-ordered memory model archs,
2861 * such as IA-64). */
2864 tx_ring->next_to_use = i;
2865 writel(i, hw->hw_addr + tx_ring->tdt);
2866 /* we need this if more than one processor can write to our tail
2867 * at a time, it syncronizes IO on IA64/Altix systems */
2872 * 82547 workaround to avoid controller hang in half-duplex environment.
2873 * The workaround is to avoid queuing a large packet that would span
2874 * the internal Tx FIFO ring boundary by notifying the stack to resend
2875 * the packet at a later time. This gives the Tx FIFO an opportunity to
2876 * flush all packets. When that occurs, we reset the Tx FIFO pointers
2877 * to the beginning of the Tx FIFO.
2880 #define E1000_FIFO_HDR 0x10
2881 #define E1000_82547_PAD_LEN 0x3E0
2883 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
2884 struct sk_buff *skb)
2886 u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
2887 u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
2889 skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
2891 if (adapter->link_duplex != HALF_DUPLEX)
2892 goto no_fifo_stall_required;
2894 if (atomic_read(&adapter->tx_fifo_stall))
2897 if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
2898 atomic_set(&adapter->tx_fifo_stall, 1);
2902 no_fifo_stall_required:
2903 adapter->tx_fifo_head += skb_fifo_len;
2904 if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
2905 adapter->tx_fifo_head -= adapter->tx_fifo_size;
2909 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
2911 struct e1000_adapter *adapter = netdev_priv(netdev);
2912 struct e1000_tx_ring *tx_ring = adapter->tx_ring;
2914 netif_stop_queue(netdev);
2915 /* Herbert's original patch had:
2916 * smp_mb__after_netif_stop_queue();
2917 * but since that doesn't exist yet, just open code it. */
2920 /* We need to check again in a case another CPU has just
2921 * made room available. */
2922 if (likely(E1000_DESC_UNUSED(tx_ring) < size))
2926 netif_start_queue(netdev);
2927 ++adapter->restart_queue;
2931 static int e1000_maybe_stop_tx(struct net_device *netdev,
2932 struct e1000_tx_ring *tx_ring, int size)
2934 if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
2936 return __e1000_maybe_stop_tx(netdev, size);
2939 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
2940 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
2941 struct net_device *netdev)
2943 struct e1000_adapter *adapter = netdev_priv(netdev);
2944 struct e1000_hw *hw = &adapter->hw;
2945 struct e1000_tx_ring *tx_ring;
2946 unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
2947 unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
2948 unsigned int tx_flags = 0;
2949 unsigned int len = skb_headlen(skb);
2950 unsigned int nr_frags;
2956 /* This goes back to the question of how to logically map a tx queue
2957 * to a flow. Right now, performance is impacted slightly negatively
2958 * if using multiple tx queues. If the stack breaks away from a
2959 * single qdisc implementation, we can look at this again. */
2960 tx_ring = adapter->tx_ring;
2962 if (unlikely(skb->len <= 0)) {
2963 dev_kfree_skb_any(skb);
2964 return NETDEV_TX_OK;
2967 mss = skb_shinfo(skb)->gso_size;
2968 /* The controller does a simple calculation to
2969 * make sure there is enough room in the FIFO before
2970 * initiating the DMA for each buffer. The calc is:
2971 * 4 = ceil(buffer len/mss). To make sure we don't
2972 * overrun the FIFO, adjust the max buffer len if mss
2976 max_per_txd = min(mss << 2, max_per_txd);
2977 max_txd_pwr = fls(max_per_txd) - 1;
2979 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
2980 if (skb->data_len && hdr_len == len) {
2981 switch (hw->mac_type) {
2982 unsigned int pull_size;
2984 /* Make sure we have room to chop off 4 bytes,
2985 * and that the end alignment will work out to
2986 * this hardware's requirements
2987 * NOTE: this is a TSO only workaround
2988 * if end byte alignment not correct move us
2989 * into the next dword */
2990 if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
2993 pull_size = min((unsigned int)4, skb->data_len);
2994 if (!__pskb_pull_tail(skb, pull_size)) {
2995 e_err("__pskb_pull_tail failed.\n");
2996 dev_kfree_skb_any(skb);
2997 return NETDEV_TX_OK;
2999 len = skb_headlen(skb);
3008 /* reserve a descriptor for the offload context */
3009 if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
3013 /* Controller Erratum workaround */
3014 if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
3017 count += TXD_USE_COUNT(len, max_txd_pwr);
3019 if (adapter->pcix_82544)
3022 /* work-around for errata 10 and it applies to all controllers
3023 * in PCI-X mode, so add one more descriptor to the count
3025 if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
3029 nr_frags = skb_shinfo(skb)->nr_frags;
3030 for (f = 0; f < nr_frags; f++)
3031 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
3033 if (adapter->pcix_82544)
3036 /* need: count + 2 desc gap to keep tail from touching
3037 * head, otherwise try next time */
3038 if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
3039 return NETDEV_TX_BUSY;
3041 if (unlikely(hw->mac_type == e1000_82547)) {
3042 if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
3043 netif_stop_queue(netdev);
3044 if (!test_bit(__E1000_DOWN, &adapter->flags))
3045 mod_timer(&adapter->tx_fifo_stall_timer,
3047 return NETDEV_TX_BUSY;
3051 if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
3052 tx_flags |= E1000_TX_FLAGS_VLAN;
3053 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
3056 first = tx_ring->next_to_use;
3058 tso = e1000_tso(adapter, tx_ring, skb);
3060 dev_kfree_skb_any(skb);
3061 return NETDEV_TX_OK;
3065 if (likely(hw->mac_type != e1000_82544))
3066 tx_ring->last_tx_tso = 1;
3067 tx_flags |= E1000_TX_FLAGS_TSO;
3068 } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
3069 tx_flags |= E1000_TX_FLAGS_CSUM;
3071 if (likely(skb->protocol == htons(ETH_P_IP)))
3072 tx_flags |= E1000_TX_FLAGS_IPV4;
3074 count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd,
3078 e1000_tx_queue(adapter, tx_ring, tx_flags, count);
3079 /* Make sure there is space in the ring for the next send. */
3080 e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
3083 dev_kfree_skb_any(skb);
3084 tx_ring->buffer_info[first].time_stamp = 0;
3085 tx_ring->next_to_use = first;
3088 return NETDEV_TX_OK;
3092 * e1000_tx_timeout - Respond to a Tx Hang
3093 * @netdev: network interface device structure
3096 static void e1000_tx_timeout(struct net_device *netdev)
3098 struct e1000_adapter *adapter = netdev_priv(netdev);
3100 /* Do the reset outside of interrupt context */
3101 adapter->tx_timeout_count++;
3102 schedule_work(&adapter->reset_task);
3105 static void e1000_reset_task(struct work_struct *work)
3107 struct e1000_adapter *adapter =
3108 container_of(work, struct e1000_adapter, reset_task);
3110 e1000_reinit_locked(adapter);
3114 * e1000_get_stats - Get System Network Statistics
3115 * @netdev: network interface device structure
3117 * Returns the address of the device statistics structure.
3118 * The statistics are actually updated from the timer callback.
3121 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
3123 /* only return the current stats */
3124 return &netdev->stats;
3128 * e1000_change_mtu - Change the Maximum Transfer Unit
3129 * @netdev: network interface device structure
3130 * @new_mtu: new value for maximum frame size
3132 * Returns 0 on success, negative on failure
3135 static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
3137 struct e1000_adapter *adapter = netdev_priv(netdev);
3138 struct e1000_hw *hw = &adapter->hw;
3139 int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
3141 if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
3142 (max_frame > MAX_JUMBO_FRAME_SIZE)) {
3143 e_err("Invalid MTU setting\n");
3147 /* Adapter-specific max frame size limits. */
3148 switch (hw->mac_type) {
3149 case e1000_undefined ... e1000_82542_rev2_1:
3150 if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
3151 e_err("Jumbo Frames not supported.\n");
3156 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3160 while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
3162 /* e1000_down has a dependency on max_frame_size */
3163 hw->max_frame_size = max_frame;
3164 if (netif_running(netdev))
3165 e1000_down(adapter);
3167 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3168 * means we reserve 2 more, this pushes us to allocate from the next
3170 * i.e. RXBUFFER_2048 --> size-4096 slab
3171 * however with the new *_jumbo_rx* routines, jumbo receives will use
3172 * fragmented skbs */
3174 if (max_frame <= E1000_RXBUFFER_2048)
3175 adapter->rx_buffer_len = E1000_RXBUFFER_2048;
3177 #if (PAGE_SIZE >= E1000_RXBUFFER_16384)
3178 adapter->rx_buffer_len = E1000_RXBUFFER_16384;
3179 #elif (PAGE_SIZE >= E1000_RXBUFFER_4096)
3180 adapter->rx_buffer_len = PAGE_SIZE;
3183 /* adjust allocation if LPE protects us, and we aren't using SBP */
3184 if (!hw->tbi_compatibility_on &&
3185 ((max_frame == (ETH_FRAME_LEN + ETH_FCS_LEN)) ||
3186 (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
3187 adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
3189 pr_info("%s changing MTU from %d to %d\n",
3190 netdev->name, netdev->mtu, new_mtu);
3191 netdev->mtu = new_mtu;
3193 if (netif_running(netdev))
3196 e1000_reset(adapter);
3198 clear_bit(__E1000_RESETTING, &adapter->flags);
3204 * e1000_update_stats - Update the board statistics counters
3205 * @adapter: board private structure
3208 void e1000_update_stats(struct e1000_adapter *adapter)
3210 struct net_device *netdev = adapter->netdev;
3211 struct e1000_hw *hw = &adapter->hw;
3212 struct pci_dev *pdev = adapter->pdev;
3213 unsigned long flags;
3216 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3219 * Prevent stats update while adapter is being reset, or if the pci
3220 * connection is down.
3222 if (adapter->link_speed == 0)
3224 if (pci_channel_offline(pdev))
3227 spin_lock_irqsave(&adapter->stats_lock, flags);
3229 /* these counters are modified from e1000_tbi_adjust_stats,
3230 * called from the interrupt context, so they must only
3231 * be written while holding adapter->stats_lock
3234 adapter->stats.crcerrs += er32(CRCERRS);
3235 adapter->stats.gprc += er32(GPRC);
3236 adapter->stats.gorcl += er32(GORCL);
3237 adapter->stats.gorch += er32(GORCH);
3238 adapter->stats.bprc += er32(BPRC);
3239 adapter->stats.mprc += er32(MPRC);
3240 adapter->stats.roc += er32(ROC);
3242 adapter->stats.prc64 += er32(PRC64);
3243 adapter->stats.prc127 += er32(PRC127);
3244 adapter->stats.prc255 += er32(PRC255);
3245 adapter->stats.prc511 += er32(PRC511);
3246 adapter->stats.prc1023 += er32(PRC1023);
3247 adapter->stats.prc1522 += er32(PRC1522);
3249 adapter->stats.symerrs += er32(SYMERRS);
3250 adapter->stats.mpc += er32(MPC);
3251 adapter->stats.scc += er32(SCC);
3252 adapter->stats.ecol += er32(ECOL);
3253 adapter->stats.mcc += er32(MCC);
3254 adapter->stats.latecol += er32(LATECOL);
3255 adapter->stats.dc += er32(DC);
3256 adapter->stats.sec += er32(SEC);
3257 adapter->stats.rlec += er32(RLEC);
3258 adapter->stats.xonrxc += er32(XONRXC);
3259 adapter->stats.xontxc += er32(XONTXC);
3260 adapter->stats.xoffrxc += er32(XOFFRXC);
3261 adapter->stats.xofftxc += er32(XOFFTXC);
3262 adapter->stats.fcruc += er32(FCRUC);
3263 adapter->stats.gptc += er32(GPTC);
3264 adapter->stats.gotcl += er32(GOTCL);
3265 adapter->stats.gotch += er32(GOTCH);
3266 adapter->stats.rnbc += er32(RNBC);
3267 adapter->stats.ruc += er32(RUC);
3268 adapter->stats.rfc += er32(RFC);
3269 adapter->stats.rjc += er32(RJC);
3270 adapter->stats.torl += er32(TORL);
3271 adapter->stats.torh += er32(TORH);
3272 adapter->stats.totl += er32(TOTL);
3273 adapter->stats.toth += er32(TOTH);
3274 adapter->stats.tpr += er32(TPR);
3276 adapter->stats.ptc64 += er32(PTC64);
3277 adapter->stats.ptc127 += er32(PTC127);
3278 adapter->stats.ptc255 += er32(PTC255);
3279 adapter->stats.ptc511 += er32(PTC511);
3280 adapter->stats.ptc1023 += er32(PTC1023);
3281 adapter->stats.ptc1522 += er32(PTC1522);
3283 adapter->stats.mptc += er32(MPTC);
3284 adapter->stats.bptc += er32(BPTC);
3286 /* used for adaptive IFS */
3288 hw->tx_packet_delta = er32(TPT);
3289 adapter->stats.tpt += hw->tx_packet_delta;
3290 hw->collision_delta = er32(COLC);
3291 adapter->stats.colc += hw->collision_delta;
3293 if (hw->mac_type >= e1000_82543) {
3294 adapter->stats.algnerrc += er32(ALGNERRC);
3295 adapter->stats.rxerrc += er32(RXERRC);
3296 adapter->stats.tncrs += er32(TNCRS);
3297 adapter->stats.cexterr += er32(CEXTERR);
3298 adapter->stats.tsctc += er32(TSCTC);
3299 adapter->stats.tsctfc += er32(TSCTFC);
3302 /* Fill out the OS statistics structure */
3303 netdev->stats.multicast = adapter->stats.mprc;
3304 netdev->stats.collisions = adapter->stats.colc;
3308 /* RLEC on some newer hardware can be incorrect so build
3309 * our own version based on RUC and ROC */
3310 netdev->stats.rx_errors = adapter->stats.rxerrc +
3311 adapter->stats.crcerrs + adapter->stats.algnerrc +
3312 adapter->stats.ruc + adapter->stats.roc +
3313 adapter->stats.cexterr;
3314 adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
3315 netdev->stats.rx_length_errors = adapter->stats.rlerrc;
3316 netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
3317 netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
3318 netdev->stats.rx_missed_errors = adapter->stats.mpc;
3321 adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
3322 netdev->stats.tx_errors = adapter->stats.txerrc;
3323 netdev->stats.tx_aborted_errors = adapter->stats.ecol;
3324 netdev->stats.tx_window_errors = adapter->stats.latecol;
3325 netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
3326 if (hw->bad_tx_carr_stats_fd &&
3327 adapter->link_duplex == FULL_DUPLEX) {
3328 netdev->stats.tx_carrier_errors = 0;
3329 adapter->stats.tncrs = 0;
3332 /* Tx Dropped needs to be maintained elsewhere */
3335 if (hw->media_type == e1000_media_type_copper) {
3336 if ((adapter->link_speed == SPEED_1000) &&
3337 (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
3338 phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
3339 adapter->phy_stats.idle_errors += phy_tmp;
3342 if ((hw->mac_type <= e1000_82546) &&
3343 (hw->phy_type == e1000_phy_m88) &&
3344 !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
3345 adapter->phy_stats.receive_errors += phy_tmp;
3348 /* Management Stats */
3349 if (hw->has_smbus) {
3350 adapter->stats.mgptc += er32(MGTPTC);
3351 adapter->stats.mgprc += er32(MGTPRC);
3352 adapter->stats.mgpdc += er32(MGTPDC);
3355 spin_unlock_irqrestore(&adapter->stats_lock, flags);
3359 * e1000_intr - Interrupt Handler
3360 * @irq: interrupt number
3361 * @data: pointer to a network interface device structure
3364 static irqreturn_t e1000_intr(int irq, void *data)
3366 struct net_device *netdev = data;
3367 struct e1000_adapter *adapter = netdev_priv(netdev);
3368 struct e1000_hw *hw = &adapter->hw;
3369 u32 icr = er32(ICR);
3371 if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
3372 return IRQ_NONE; /* Not our interrupt */
3374 if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
3375 hw->get_link_status = 1;
3376 /* guard against interrupt when we're going down */
3377 if (!test_bit(__E1000_DOWN, &adapter->flags))
3378 mod_timer(&adapter->watchdog_timer, jiffies + 1);
3381 /* disable interrupts, without the synchronize_irq bit */
3383 E1000_WRITE_FLUSH();
3385 if (likely(napi_schedule_prep(&adapter->napi))) {
3386 adapter->total_tx_bytes = 0;
3387 adapter->total_tx_packets = 0;
3388 adapter->total_rx_bytes = 0;
3389 adapter->total_rx_packets = 0;
3390 __napi_schedule(&adapter->napi);
3392 /* this really should not happen! if it does it is basically a
3393 * bug, but not a hard error, so enable ints and continue */
3394 if (!test_bit(__E1000_DOWN, &adapter->flags))
3395 e1000_irq_enable(adapter);
3402 * e1000_clean - NAPI Rx polling callback
3403 * @adapter: board private structure
3405 static int e1000_clean(struct napi_struct *napi, int budget)
3407 struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
3408 int tx_clean_complete = 0, work_done = 0;
3410 tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
3412 adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget);
3414 if (!tx_clean_complete)
3417 /* If budget not fully consumed, exit the polling mode */
3418 if (work_done < budget) {
3419 if (likely(adapter->itr_setting & 3))
3420 e1000_set_itr(adapter);
3421 napi_complete(napi);
3422 if (!test_bit(__E1000_DOWN, &adapter->flags))
3423 e1000_irq_enable(adapter);
3430 * e1000_clean_tx_irq - Reclaim resources after transmit completes
3431 * @adapter: board private structure
3433 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
3434 struct e1000_tx_ring *tx_ring)
3436 struct e1000_hw *hw = &adapter->hw;
3437 struct net_device *netdev = adapter->netdev;
3438 struct e1000_tx_desc *tx_desc, *eop_desc;
3439 struct e1000_buffer *buffer_info;
3440 unsigned int i, eop;
3441 unsigned int count = 0;
3442 unsigned int total_tx_bytes=0, total_tx_packets=0;
3444 i = tx_ring->next_to_clean;
3445 eop = tx_ring->buffer_info[i].next_to_watch;
3446 eop_desc = E1000_TX_DESC(*tx_ring, eop);
3448 while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
3449 (count < tx_ring->count)) {
3450 bool cleaned = false;
3451 for ( ; !cleaned; count++) {
3452 tx_desc = E1000_TX_DESC(*tx_ring, i);
3453 buffer_info = &tx_ring->buffer_info[i];
3454 cleaned = (i == eop);
3457 struct sk_buff *skb = buffer_info->skb;
3458 unsigned int segs, bytecount;
3459 segs = skb_shinfo(skb)->gso_segs ?: 1;
3460 /* multiply data chunks by size of headers */
3461 bytecount = ((segs - 1) * skb_headlen(skb)) +
3463 total_tx_packets += segs;
3464 total_tx_bytes += bytecount;
3466 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
3467 tx_desc->upper.data = 0;
3469 if (unlikely(++i == tx_ring->count)) i = 0;
3472 eop = tx_ring->buffer_info[i].next_to_watch;
3473 eop_desc = E1000_TX_DESC(*tx_ring, eop);
3476 tx_ring->next_to_clean = i;
3478 #define TX_WAKE_THRESHOLD 32
3479 if (unlikely(count && netif_carrier_ok(netdev) &&
3480 E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
3481 /* Make sure that anybody stopping the queue after this
3482 * sees the new next_to_clean.
3486 if (netif_queue_stopped(netdev) &&
3487 !(test_bit(__E1000_DOWN, &adapter->flags))) {
3488 netif_wake_queue(netdev);
3489 ++adapter->restart_queue;
3493 if (adapter->detect_tx_hung) {
3494 /* Detect a transmit hang in hardware, this serializes the
3495 * check with the clearing of time_stamp and movement of i */
3496 adapter->detect_tx_hung = false;
3497 if (tx_ring->buffer_info[eop].time_stamp &&
3498 time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
3499 (adapter->tx_timeout_factor * HZ)) &&
3500 !(er32(STATUS) & E1000_STATUS_TXOFF)) {
3502 /* detected Tx unit hang */
3503 e_err("Detected Tx Unit Hang\n"
3507 " next_to_use <%x>\n"
3508 " next_to_clean <%x>\n"
3509 "buffer_info[next_to_clean]\n"
3510 " time_stamp <%lx>\n"
3511 " next_to_watch <%x>\n"
3513 " next_to_watch.status <%x>\n",
3514 (unsigned long)((tx_ring - adapter->tx_ring) /
3515 sizeof(struct e1000_tx_ring)),
3516 readl(hw->hw_addr + tx_ring->tdh),
3517 readl(hw->hw_addr + tx_ring->tdt),
3518 tx_ring->next_to_use,
3519 tx_ring->next_to_clean,
3520 tx_ring->buffer_info[eop].time_stamp,
3523 eop_desc->upper.fields.status);
3524 netif_stop_queue(netdev);
3527 adapter->total_tx_bytes += total_tx_bytes;
3528 adapter->total_tx_packets += total_tx_packets;
3529 netdev->stats.tx_bytes += total_tx_bytes;
3530 netdev->stats.tx_packets += total_tx_packets;
3531 return (count < tx_ring->count);
3535 * e1000_rx_checksum - Receive Checksum Offload for 82543
3536 * @adapter: board private structure
3537 * @status_err: receive descriptor status and error fields
3538 * @csum: receive descriptor csum field
3539 * @sk_buff: socket buffer with received data
3542 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
3543 u32 csum, struct sk_buff *skb)
3545 struct e1000_hw *hw = &adapter->hw;
3546 u16 status = (u16)status_err;
3547 u8 errors = (u8)(status_err >> 24);
3548 skb->ip_summed = CHECKSUM_NONE;
3550 /* 82543 or newer only */
3551 if (unlikely(hw->mac_type < e1000_82543)) return;
3552 /* Ignore Checksum bit is set */
3553 if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
3554 /* TCP/UDP checksum error bit is set */
3555 if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
3556 /* let the stack verify checksum errors */
3557 adapter->hw_csum_err++;
3560 /* TCP/UDP Checksum has not been calculated */
3561 if (!(status & E1000_RXD_STAT_TCPCS))
3564 /* It must be a TCP or UDP packet with a valid checksum */
3565 if (likely(status & E1000_RXD_STAT_TCPCS)) {
3566 /* TCP checksum is good */
3567 skb->ip_summed = CHECKSUM_UNNECESSARY;
3569 adapter->hw_csum_good++;
3573 * e1000_consume_page - helper function
3575 static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
3580 skb->data_len += length;
3581 skb->truesize += length;
3585 * e1000_receive_skb - helper function to handle rx indications
3586 * @adapter: board private structure
3587 * @status: descriptor status field as written by hardware
3588 * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
3589 * @skb: pointer to sk_buff to be indicated to stack
3591 static void e1000_receive_skb(struct e1000_adapter *adapter, u8 status,
3592 __le16 vlan, struct sk_buff *skb)
3594 if (unlikely(adapter->vlgrp && (status & E1000_RXD_STAT_VP))) {
3595 vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
3597 E1000_RXD_SPC_VLAN_MASK);
3599 netif_receive_skb(skb);
3604 * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
3605 * @adapter: board private structure
3606 * @rx_ring: ring to clean
3607 * @work_done: amount of napi work completed this call
3608 * @work_to_do: max amount of work allowed for this call to do
3610 * the return value indicates whether actual cleaning was done, there
3611 * is no guarantee that everything was cleaned
3613 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
3614 struct e1000_rx_ring *rx_ring,
3615 int *work_done, int work_to_do)
3617 struct e1000_hw *hw = &adapter->hw;
3618 struct net_device *netdev = adapter->netdev;
3619 struct pci_dev *pdev = adapter->pdev;
3620 struct e1000_rx_desc *rx_desc, *next_rxd;
3621 struct e1000_buffer *buffer_info, *next_buffer;
3622 unsigned long irq_flags;
3625 int cleaned_count = 0;
3626 bool cleaned = false;
3627 unsigned int total_rx_bytes=0, total_rx_packets=0;
3629 i = rx_ring->next_to_clean;
3630 rx_desc = E1000_RX_DESC(*rx_ring, i);
3631 buffer_info = &rx_ring->buffer_info[i];
3633 while (rx_desc->status & E1000_RXD_STAT_DD) {
3634 struct sk_buff *skb;
3637 if (*work_done >= work_to_do)
3641 status = rx_desc->status;
3642 skb = buffer_info->skb;
3643 buffer_info->skb = NULL;
3645 if (++i == rx_ring->count) i = 0;
3646 next_rxd = E1000_RX_DESC(*rx_ring, i);
3649 next_buffer = &rx_ring->buffer_info[i];
3653 dma_unmap_page(&pdev->dev, buffer_info->dma,
3654 buffer_info->length, DMA_FROM_DEVICE);
3655 buffer_info->dma = 0;
3657 length = le16_to_cpu(rx_desc->length);
3659 /* errors is only valid for DD + EOP descriptors */
3660 if (unlikely((status & E1000_RXD_STAT_EOP) &&
3661 (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
3662 u8 last_byte = *(skb->data + length - 1);
3663 if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
3665 spin_lock_irqsave(&adapter->stats_lock,
3667 e1000_tbi_adjust_stats(hw, &adapter->stats,
3669 spin_unlock_irqrestore(&adapter->stats_lock,
3673 /* recycle both page and skb */
3674 buffer_info->skb = skb;
3675 /* an error means any chain goes out the window
3677 if (rx_ring->rx_skb_top)
3678 dev_kfree_skb(rx_ring->rx_skb_top);
3679 rx_ring->rx_skb_top = NULL;
3684 #define rxtop rx_ring->rx_skb_top
3685 if (!(status & E1000_RXD_STAT_EOP)) {
3686 /* this descriptor is only the beginning (or middle) */
3688 /* this is the beginning of a chain */
3690 skb_fill_page_desc(rxtop, 0, buffer_info->page,
3693 /* this is the middle of a chain */
3694 skb_fill_page_desc(rxtop,
3695 skb_shinfo(rxtop)->nr_frags,
3696 buffer_info->page, 0, length);
3697 /* re-use the skb, only consumed the page */
3698 buffer_info->skb = skb;
3700 e1000_consume_page(buffer_info, rxtop, length);
3704 /* end of the chain */
3705 skb_fill_page_desc(rxtop,
3706 skb_shinfo(rxtop)->nr_frags,
3707 buffer_info->page, 0, length);
3708 /* re-use the current skb, we only consumed the
3710 buffer_info->skb = skb;
3713 e1000_consume_page(buffer_info, skb, length);
3715 /* no chain, got EOP, this buf is the packet
3716 * copybreak to save the put_page/alloc_page */
3717 if (length <= copybreak &&
3718 skb_tailroom(skb) >= length) {
3720 vaddr = kmap_atomic(buffer_info->page,
3721 KM_SKB_DATA_SOFTIRQ);
3722 memcpy(skb_tail_pointer(skb), vaddr, length);
3723 kunmap_atomic(vaddr,
3724 KM_SKB_DATA_SOFTIRQ);
3725 /* re-use the page, so don't erase
3726 * buffer_info->page */
3727 skb_put(skb, length);
3729 skb_fill_page_desc(skb, 0,
3730 buffer_info->page, 0,
3732 e1000_consume_page(buffer_info, skb,
3738 /* Receive Checksum Offload XXX recompute due to CRC strip? */
3739 e1000_rx_checksum(adapter,
3741 ((u32)(rx_desc->errors) << 24),
3742 le16_to_cpu(rx_desc->csum), skb);
3744 pskb_trim(skb, skb->len - 4);
3746 /* probably a little skewed due to removing CRC */
3747 total_rx_bytes += skb->len;
3750 /* eth type trans needs skb->data to point to something */
3751 if (!pskb_may_pull(skb, ETH_HLEN)) {
3752 e_err("pskb_may_pull failed.\n");
3757 skb->protocol = eth_type_trans(skb, netdev);
3759 e1000_receive_skb(adapter, status, rx_desc->special, skb);
3762 rx_desc->status = 0;
3764 /* return some buffers to hardware, one at a time is too slow */
3765 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
3766 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
3770 /* use prefetched values */
3772 buffer_info = next_buffer;
3774 rx_ring->next_to_clean = i;
3776 cleaned_count = E1000_DESC_UNUSED(rx_ring);
3778 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
3780 adapter->total_rx_packets += total_rx_packets;
3781 adapter->total_rx_bytes += total_rx_bytes;
3782 netdev->stats.rx_bytes += total_rx_bytes;
3783 netdev->stats.rx_packets += total_rx_packets;
3788 * this should improve performance for small packets with large amounts
3789 * of reassembly being done in the stack
3791 static void e1000_check_copybreak(struct net_device *netdev,
3792 struct e1000_buffer *buffer_info,
3793 u32 length, struct sk_buff **skb)
3795 struct sk_buff *new_skb;
3797 if (length > copybreak)
3800 new_skb = netdev_alloc_skb_ip_align(netdev, length);
3804 skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN,
3805 (*skb)->data - NET_IP_ALIGN,
3806 length + NET_IP_ALIGN);
3807 /* save the skb in buffer_info as good */
3808 buffer_info->skb = *skb;
3813 * e1000_clean_rx_irq - Send received data up the network stack; legacy
3814 * @adapter: board private structure
3815 * @rx_ring: ring to clean
3816 * @work_done: amount of napi work completed this call
3817 * @work_to_do: max amount of work allowed for this call to do
3819 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
3820 struct e1000_rx_ring *rx_ring,
3821 int *work_done, int work_to_do)
3823 struct e1000_hw *hw = &adapter->hw;
3824 struct net_device *netdev = adapter->netdev;
3825 struct pci_dev *pdev = adapter->pdev;
3826 struct e1000_rx_desc *rx_desc, *next_rxd;
3827 struct e1000_buffer *buffer_info, *next_buffer;
3828 unsigned long flags;
3831 int cleaned_count = 0;
3832 bool cleaned = false;
3833 unsigned int total_rx_bytes=0, total_rx_packets=0;
3835 i = rx_ring->next_to_clean;
3836 rx_desc = E1000_RX_DESC(*rx_ring, i);
3837 buffer_info = &rx_ring->buffer_info[i];
3839 while (rx_desc->status & E1000_RXD_STAT_DD) {
3840 struct sk_buff *skb;
3843 if (*work_done >= work_to_do)
3847 status = rx_desc->status;
3848 skb = buffer_info->skb;
3849 buffer_info->skb = NULL;
3851 prefetch(skb->data - NET_IP_ALIGN);
3853 if (++i == rx_ring->count) i = 0;
3854 next_rxd = E1000_RX_DESC(*rx_ring, i);
3857 next_buffer = &rx_ring->buffer_info[i];
3861 dma_unmap_single(&pdev->dev, buffer_info->dma,
3862 buffer_info->length, DMA_FROM_DEVICE);
3863 buffer_info->dma = 0;
3865 length = le16_to_cpu(rx_desc->length);
3866 /* !EOP means multiple descriptors were used to store a single
3867 * packet, if thats the case we need to toss it. In fact, we
3868 * to toss every packet with the EOP bit clear and the next
3869 * frame that _does_ have the EOP bit set, as it is by
3870 * definition only a frame fragment
3872 if (unlikely(!(status & E1000_RXD_STAT_EOP)))
3873 adapter->discarding = true;
3875 if (adapter->discarding) {
3876 /* All receives must fit into a single buffer */
3877 e_info("Receive packet consumed multiple buffers\n");
3879 buffer_info->skb = skb;
3880 if (status & E1000_RXD_STAT_EOP)
3881 adapter->discarding = false;
3885 if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
3886 u8 last_byte = *(skb->data + length - 1);
3887 if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
3889 spin_lock_irqsave(&adapter->stats_lock, flags);
3890 e1000_tbi_adjust_stats(hw, &adapter->stats,
3892 spin_unlock_irqrestore(&adapter->stats_lock,
3897 buffer_info->skb = skb;
3902 /* adjust length to remove Ethernet CRC, this must be
3903 * done after the TBI_ACCEPT workaround above */
3906 /* probably a little skewed due to removing CRC */
3907 total_rx_bytes += length;
3910 e1000_check_copybreak(netdev, buffer_info, length, &skb);
3912 skb_put(skb, length);
3914 /* Receive Checksum Offload */
3915 e1000_rx_checksum(adapter,
3917 ((u32)(rx_desc->errors) << 24),
3918 le16_to_cpu(rx_desc->csum), skb);
3920 skb->protocol = eth_type_trans(skb, netdev);
3922 e1000_receive_skb(adapter, status, rx_desc->special, skb);
3925 rx_desc->status = 0;
3927 /* return some buffers to hardware, one at a time is too slow */
3928 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
3929 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
3933 /* use prefetched values */
3935 buffer_info = next_buffer;
3937 rx_ring->next_to_clean = i;
3939 cleaned_count = E1000_DESC_UNUSED(rx_ring);
3941 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
3943 adapter->total_rx_packets += total_rx_packets;
3944 adapter->total_rx_bytes += total_rx_bytes;
3945 netdev->stats.rx_bytes += total_rx_bytes;
3946 netdev->stats.rx_packets += total_rx_packets;
3951 * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
3952 * @adapter: address of board private structure
3953 * @rx_ring: pointer to receive ring structure
3954 * @cleaned_count: number of buffers to allocate this pass
3958 e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
3959 struct e1000_rx_ring *rx_ring, int cleaned_count)
3961 struct net_device *netdev = adapter->netdev;
3962 struct pci_dev *pdev = adapter->pdev;
3963 struct e1000_rx_desc *rx_desc;
3964 struct e1000_buffer *buffer_info;
3965 struct sk_buff *skb;
3967 unsigned int bufsz = 256 - 16 /*for skb_reserve */ ;
3969 i = rx_ring->next_to_use;
3970 buffer_info = &rx_ring->buffer_info[i];
3972 while (cleaned_count--) {
3973 skb = buffer_info->skb;
3979 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
3980 if (unlikely(!skb)) {
3981 /* Better luck next round */
3982 adapter->alloc_rx_buff_failed++;
3986 /* Fix for errata 23, can't cross 64kB boundary */
3987 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
3988 struct sk_buff *oldskb = skb;
3989 e_err("skb align check failed: %u bytes at %p\n",
3991 /* Try again, without freeing the previous */
3992 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
3993 /* Failed allocation, critical failure */
3995 dev_kfree_skb(oldskb);
3996 adapter->alloc_rx_buff_failed++;
4000 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4003 dev_kfree_skb(oldskb);
4004 break; /* while (cleaned_count--) */
4007 /* Use new allocation */
4008 dev_kfree_skb(oldskb);
4010 buffer_info->skb = skb;
4011 buffer_info->length = adapter->rx_buffer_len;
4013 /* allocate a new page if necessary */
4014 if (!buffer_info->page) {
4015 buffer_info->page = alloc_page(GFP_ATOMIC);
4016 if (unlikely(!buffer_info->page)) {
4017 adapter->alloc_rx_buff_failed++;
4022 if (!buffer_info->dma) {
4023 buffer_info->dma = dma_map_page(&pdev->dev,
4024 buffer_info->page, 0,
4025 buffer_info->length,
4027 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
4028 put_page(buffer_info->page);
4030 buffer_info->page = NULL;
4031 buffer_info->skb = NULL;
4032 buffer_info->dma = 0;
4033 adapter->alloc_rx_buff_failed++;
4034 break; /* while !buffer_info->skb */
4038 rx_desc = E1000_RX_DESC(*rx_ring, i);
4039 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4041 if (unlikely(++i == rx_ring->count))
4043 buffer_info = &rx_ring->buffer_info[i];
4046 if (likely(rx_ring->next_to_use != i)) {
4047 rx_ring->next_to_use = i;
4048 if (unlikely(i-- == 0))
4049 i = (rx_ring->count - 1);
4051 /* Force memory writes to complete before letting h/w
4052 * know there are new descriptors to fetch. (Only
4053 * applicable for weak-ordered memory model archs,
4054 * such as IA-64). */
4056 writel(i, adapter->hw.hw_addr + rx_ring->rdt);
4061 * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4062 * @adapter: address of board private structure
4065 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
4066 struct e1000_rx_ring *rx_ring,
4069 struct e1000_hw *hw = &adapter->hw;
4070 struct net_device *netdev = adapter->netdev;
4071 struct pci_dev *pdev = adapter->pdev;
4072 struct e1000_rx_desc *rx_desc;
4073 struct e1000_buffer *buffer_info;
4074 struct sk_buff *skb;
4076 unsigned int bufsz = adapter->rx_buffer_len;
4078 i = rx_ring->next_to_use;
4079 buffer_info = &rx_ring->buffer_info[i];
4081 while (cleaned_count--) {
4082 skb = buffer_info->skb;
4088 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
4089 if (unlikely(!skb)) {
4090 /* Better luck next round */
4091 adapter->alloc_rx_buff_failed++;
4095 /* Fix for errata 23, can't cross 64kB boundary */
4096 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4097 struct sk_buff *oldskb = skb;
4098 e_err("skb align check failed: %u bytes at %p\n",
4100 /* Try again, without freeing the previous */
4101 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
4102 /* Failed allocation, critical failure */
4104 dev_kfree_skb(oldskb);
4105 adapter->alloc_rx_buff_failed++;
4109 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4112 dev_kfree_skb(oldskb);
4113 adapter->alloc_rx_buff_failed++;
4114 break; /* while !buffer_info->skb */
4117 /* Use new allocation */
4118 dev_kfree_skb(oldskb);
4120 buffer_info->skb = skb;
4121 buffer_info->length = adapter->rx_buffer_len;
4123 buffer_info->dma = dma_map_single(&pdev->dev,
4125 buffer_info->length,
4127 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
4129 buffer_info->skb = NULL;
4130 buffer_info->dma = 0;
4131 adapter->alloc_rx_buff_failed++;
4132 break; /* while !buffer_info->skb */
4136 * XXX if it was allocated cleanly it will never map to a
4140 /* Fix for errata 23, can't cross 64kB boundary */
4141 if (!e1000_check_64k_bound(adapter,
4142 (void *)(unsigned long)buffer_info->dma,
4143 adapter->rx_buffer_len)) {
4144 e_err("dma align check failed: %u bytes at %p\n",
4145 adapter->rx_buffer_len,
4146 (void *)(unsigned long)buffer_info->dma);
4148 buffer_info->skb = NULL;
4150 dma_unmap_single(&pdev->dev, buffer_info->dma,
4151 adapter->rx_buffer_len,
4153 buffer_info->dma = 0;
4155 adapter->alloc_rx_buff_failed++;
4156 break; /* while !buffer_info->skb */
4158 rx_desc = E1000_RX_DESC(*rx_ring, i);
4159 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4161 if (unlikely(++i == rx_ring->count))
4163 buffer_info = &rx_ring->buffer_info[i];
4166 if (likely(rx_ring->next_to_use != i)) {
4167 rx_ring->next_to_use = i;
4168 if (unlikely(i-- == 0))
4169 i = (rx_ring->count - 1);
4171 /* Force memory writes to complete before letting h/w
4172 * know there are new descriptors to fetch. (Only
4173 * applicable for weak-ordered memory model archs,
4174 * such as IA-64). */
4176 writel(i, hw->hw_addr + rx_ring->rdt);
4181 * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4185 static void e1000_smartspeed(struct e1000_adapter *adapter)
4187 struct e1000_hw *hw = &adapter->hw;
4191 if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
4192 !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
4195 if (adapter->smartspeed == 0) {
4196 /* If Master/Slave config fault is asserted twice,
4197 * we assume back-to-back */
4198 e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
4199 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4200 e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
4201 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4202 e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
4203 if (phy_ctrl & CR_1000T_MS_ENABLE) {
4204 phy_ctrl &= ~CR_1000T_MS_ENABLE;
4205 e1000_write_phy_reg(hw, PHY_1000T_CTRL,
4207 adapter->smartspeed++;
4208 if (!e1000_phy_setup_autoneg(hw) &&
4209 !e1000_read_phy_reg(hw, PHY_CTRL,
4211 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4212 MII_CR_RESTART_AUTO_NEG);
4213 e1000_write_phy_reg(hw, PHY_CTRL,
4218 } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
4219 /* If still no link, perhaps using 2/3 pair cable */
4220 e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
4221 phy_ctrl |= CR_1000T_MS_ENABLE;
4222 e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
4223 if (!e1000_phy_setup_autoneg(hw) &&
4224 !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
4225 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4226 MII_CR_RESTART_AUTO_NEG);
4227 e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
4230 /* Restart process after E1000_SMARTSPEED_MAX iterations */
4231 if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
4232 adapter->smartspeed = 0;
4242 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4248 return e1000_mii_ioctl(netdev, ifr, cmd);
4261 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
4264 struct e1000_adapter *adapter = netdev_priv(netdev);
4265 struct e1000_hw *hw = &adapter->hw;
4266 struct mii_ioctl_data *data = if_mii(ifr);
4270 unsigned long flags;
4272 if (hw->media_type != e1000_media_type_copper)
4277 data->phy_id = hw->phy_addr;
4280 spin_lock_irqsave(&adapter->stats_lock, flags);
4281 if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
4283 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4286 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4289 if (data->reg_num & ~(0x1F))
4291 mii_reg = data->val_in;
4292 spin_lock_irqsave(&adapter->stats_lock, flags);
4293 if (e1000_write_phy_reg(hw, data->reg_num,
4295 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4298 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4299 if (hw->media_type == e1000_media_type_copper) {
4300 switch (data->reg_num) {
4302 if (mii_reg & MII_CR_POWER_DOWN)
4304 if (mii_reg & MII_CR_AUTO_NEG_EN) {
4306 hw->autoneg_advertised = 0x2F;
4309 spddplx = SPEED_1000;
4310 else if (mii_reg & 0x2000)
4311 spddplx = SPEED_100;
4314 spddplx += (mii_reg & 0x100)
4317 retval = e1000_set_spd_dplx(adapter,
4322 if (netif_running(adapter->netdev))
4323 e1000_reinit_locked(adapter);
4325 e1000_reset(adapter);
4327 case M88E1000_PHY_SPEC_CTRL:
4328 case M88E1000_EXT_PHY_SPEC_CTRL:
4329 if (e1000_phy_reset(hw))
4334 switch (data->reg_num) {
4336 if (mii_reg & MII_CR_POWER_DOWN)
4338 if (netif_running(adapter->netdev))
4339 e1000_reinit_locked(adapter);
4341 e1000_reset(adapter);
4349 return E1000_SUCCESS;
4352 void e1000_pci_set_mwi(struct e1000_hw *hw)
4354 struct e1000_adapter *adapter = hw->back;
4355 int ret_val = pci_set_mwi(adapter->pdev);
4358 e_err("Error in setting MWI\n");
4361 void e1000_pci_clear_mwi(struct e1000_hw *hw)
4363 struct e1000_adapter *adapter = hw->back;
4365 pci_clear_mwi(adapter->pdev);
4368 int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
4370 struct e1000_adapter *adapter = hw->back;
4371 return pcix_get_mmrbc(adapter->pdev);
4374 void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
4376 struct e1000_adapter *adapter = hw->back;
4377 pcix_set_mmrbc(adapter->pdev, mmrbc);
4380 void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
4385 static void e1000_vlan_rx_register(struct net_device *netdev,
4386 struct vlan_group *grp)
4388 struct e1000_adapter *adapter = netdev_priv(netdev);
4389 struct e1000_hw *hw = &adapter->hw;
4392 if (!test_bit(__E1000_DOWN, &adapter->flags))
4393 e1000_irq_disable(adapter);
4394 adapter->vlgrp = grp;
4397 /* enable VLAN tag insert/strip */
4399 ctrl |= E1000_CTRL_VME;
4402 /* enable VLAN receive filtering */
4404 rctl &= ~E1000_RCTL_CFIEN;
4405 if (!(netdev->flags & IFF_PROMISC))
4406 rctl |= E1000_RCTL_VFE;
4408 e1000_update_mng_vlan(adapter);
4410 /* disable VLAN tag insert/strip */
4412 ctrl &= ~E1000_CTRL_VME;
4415 /* disable VLAN receive filtering */
4417 rctl &= ~E1000_RCTL_VFE;
4420 if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
4421 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
4422 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
4426 if (!test_bit(__E1000_DOWN, &adapter->flags))
4427 e1000_irq_enable(adapter);
4430 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
4432 struct e1000_adapter *adapter = netdev_priv(netdev);
4433 struct e1000_hw *hw = &adapter->hw;
4436 if ((hw->mng_cookie.status &
4437 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4438 (vid == adapter->mng_vlan_id))
4440 /* add VID to filter table */
4441 index = (vid >> 5) & 0x7F;
4442 vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
4443 vfta |= (1 << (vid & 0x1F));
4444 e1000_write_vfta(hw, index, vfta);
4447 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
4449 struct e1000_adapter *adapter = netdev_priv(netdev);
4450 struct e1000_hw *hw = &adapter->hw;
4453 if (!test_bit(__E1000_DOWN, &adapter->flags))
4454 e1000_irq_disable(adapter);
4455 vlan_group_set_device(adapter->vlgrp, vid, NULL);
4456 if (!test_bit(__E1000_DOWN, &adapter->flags))
4457 e1000_irq_enable(adapter);
4459 /* remove VID from filter table */
4460 index = (vid >> 5) & 0x7F;
4461 vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
4462 vfta &= ~(1 << (vid & 0x1F));
4463 e1000_write_vfta(hw, index, vfta);
4466 static void e1000_restore_vlan(struct e1000_adapter *adapter)
4468 e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
4470 if (adapter->vlgrp) {
4472 for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
4473 if (!vlan_group_get_device(adapter->vlgrp, vid))
4475 e1000_vlan_rx_add_vid(adapter->netdev, vid);
4480 int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
4482 struct e1000_hw *hw = &adapter->hw;
4486 /* Fiber NICs only allow 1000 gbps Full duplex */
4487 if ((hw->media_type == e1000_media_type_fiber) &&
4488 spddplx != (SPEED_1000 + DUPLEX_FULL)) {
4489 e_err("Unsupported Speed/Duplex configuration\n");
4494 case SPEED_10 + DUPLEX_HALF:
4495 hw->forced_speed_duplex = e1000_10_half;
4497 case SPEED_10 + DUPLEX_FULL:
4498 hw->forced_speed_duplex = e1000_10_full;
4500 case SPEED_100 + DUPLEX_HALF:
4501 hw->forced_speed_duplex = e1000_100_half;
4503 case SPEED_100 + DUPLEX_FULL:
4504 hw->forced_speed_duplex = e1000_100_full;
4506 case SPEED_1000 + DUPLEX_FULL:
4508 hw->autoneg_advertised = ADVERTISE_1000_FULL;
4510 case SPEED_1000 + DUPLEX_HALF: /* not supported */
4512 e_err("Unsupported Speed/Duplex configuration\n");
4518 static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
4520 struct net_device *netdev = pci_get_drvdata(pdev);
4521 struct e1000_adapter *adapter = netdev_priv(netdev);
4522 struct e1000_hw *hw = &adapter->hw;
4523 u32 ctrl, ctrl_ext, rctl, status;
4524 u32 wufc = adapter->wol;
4529 netif_device_detach(netdev);
4531 if (netif_running(netdev)) {
4532 WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
4533 e1000_down(adapter);
4537 retval = pci_save_state(pdev);
4542 status = er32(STATUS);
4543 if (status & E1000_STATUS_LU)
4544 wufc &= ~E1000_WUFC_LNKC;
4547 e1000_setup_rctl(adapter);
4548 e1000_set_rx_mode(netdev);
4550 /* turn on all-multi mode if wake on multicast is enabled */
4551 if (wufc & E1000_WUFC_MC) {
4553 rctl |= E1000_RCTL_MPE;
4557 if (hw->mac_type >= e1000_82540) {
4559 /* advertise wake from D3Cold */
4560 #define E1000_CTRL_ADVD3WUC 0x00100000
4561 /* phy power management enable */
4562 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4563 ctrl |= E1000_CTRL_ADVD3WUC |
4564 E1000_CTRL_EN_PHY_PWR_MGMT;
4568 if (hw->media_type == e1000_media_type_fiber ||
4569 hw->media_type == e1000_media_type_internal_serdes) {
4570 /* keep the laser running in D3 */
4571 ctrl_ext = er32(CTRL_EXT);
4572 ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
4573 ew32(CTRL_EXT, ctrl_ext);
4576 ew32(WUC, E1000_WUC_PME_EN);
4583 e1000_release_manageability(adapter);
4585 *enable_wake = !!wufc;
4587 /* make sure adapter isn't asleep if manageability is enabled */
4588 if (adapter->en_mng_pt)
4589 *enable_wake = true;
4591 if (netif_running(netdev))
4592 e1000_free_irq(adapter);
4594 pci_disable_device(pdev);
4600 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
4605 retval = __e1000_shutdown(pdev, &wake);
4610 pci_prepare_to_sleep(pdev);
4612 pci_wake_from_d3(pdev, false);
4613 pci_set_power_state(pdev, PCI_D3hot);
4619 static int e1000_resume(struct pci_dev *pdev)
4621 struct net_device *netdev = pci_get_drvdata(pdev);
4622 struct e1000_adapter *adapter = netdev_priv(netdev);
4623 struct e1000_hw *hw = &adapter->hw;
4626 pci_set_power_state(pdev, PCI_D0);
4627 pci_restore_state(pdev);
4628 pci_save_state(pdev);
4630 if (adapter->need_ioport)
4631 err = pci_enable_device(pdev);
4633 err = pci_enable_device_mem(pdev);
4635 pr_err("Cannot enable PCI device from suspend\n");
4638 pci_set_master(pdev);
4640 pci_enable_wake(pdev, PCI_D3hot, 0);
4641 pci_enable_wake(pdev, PCI_D3cold, 0);
4643 if (netif_running(netdev)) {
4644 err = e1000_request_irq(adapter);
4649 e1000_power_up_phy(adapter);
4650 e1000_reset(adapter);
4653 e1000_init_manageability(adapter);
4655 if (netif_running(netdev))
4658 netif_device_attach(netdev);
4664 static void e1000_shutdown(struct pci_dev *pdev)
4668 __e1000_shutdown(pdev, &wake);
4670 if (system_state == SYSTEM_POWER_OFF) {
4671 pci_wake_from_d3(pdev, wake);
4672 pci_set_power_state(pdev, PCI_D3hot);
4676 #ifdef CONFIG_NET_POLL_CONTROLLER
4678 * Polling 'interrupt' - used by things like netconsole to send skbs
4679 * without having to re-enable interrupts. It's not called while
4680 * the interrupt routine is executing.
4682 static void e1000_netpoll(struct net_device *netdev)
4684 struct e1000_adapter *adapter = netdev_priv(netdev);
4686 disable_irq(adapter->pdev->irq);
4687 e1000_intr(adapter->pdev->irq, netdev);
4688 enable_irq(adapter->pdev->irq);
4693 * e1000_io_error_detected - called when PCI error is detected
4694 * @pdev: Pointer to PCI device
4695 * @state: The current pci connection state
4697 * This function is called after a PCI bus error affecting
4698 * this device has been detected.
4700 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
4701 pci_channel_state_t state)
4703 struct net_device *netdev = pci_get_drvdata(pdev);
4704 struct e1000_adapter *adapter = netdev_priv(netdev);
4706 netif_device_detach(netdev);
4708 if (state == pci_channel_io_perm_failure)
4709 return PCI_ERS_RESULT_DISCONNECT;
4711 if (netif_running(netdev))
4712 e1000_down(adapter);
4713 pci_disable_device(pdev);
4715 /* Request a slot slot reset. */
4716 return PCI_ERS_RESULT_NEED_RESET;
4720 * e1000_io_slot_reset - called after the pci bus has been reset.
4721 * @pdev: Pointer to PCI device
4723 * Restart the card from scratch, as if from a cold-boot. Implementation
4724 * resembles the first-half of the e1000_resume routine.
4726 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
4728 struct net_device *netdev = pci_get_drvdata(pdev);
4729 struct e1000_adapter *adapter = netdev_priv(netdev);
4730 struct e1000_hw *hw = &adapter->hw;
4733 if (adapter->need_ioport)
4734 err = pci_enable_device(pdev);
4736 err = pci_enable_device_mem(pdev);
4738 pr_err("Cannot re-enable PCI device after reset.\n");
4739 return PCI_ERS_RESULT_DISCONNECT;
4741 pci_set_master(pdev);
4743 pci_enable_wake(pdev, PCI_D3hot, 0);
4744 pci_enable_wake(pdev, PCI_D3cold, 0);
4746 e1000_reset(adapter);
4749 return PCI_ERS_RESULT_RECOVERED;
4753 * e1000_io_resume - called when traffic can start flowing again.
4754 * @pdev: Pointer to PCI device
4756 * This callback is called when the error recovery driver tells us that
4757 * its OK to resume normal operation. Implementation resembles the
4758 * second-half of the e1000_resume routine.
4760 static void e1000_io_resume(struct pci_dev *pdev)
4762 struct net_device *netdev = pci_get_drvdata(pdev);
4763 struct e1000_adapter *adapter = netdev_priv(netdev);
4765 e1000_init_manageability(adapter);
4767 if (netif_running(netdev)) {
4768 if (e1000_up(adapter)) {
4769 pr_info("can't bring device back up after reset\n");
4774 netif_device_attach(netdev);