drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

   1 /* bnx2x_cmn.c: Broadcom Everest network driver.
   2  *
   3  * Copyright (c) 2007-2013 Broadcom Corporation
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation.
   8  *
   9  * Maintained by: Eilon Greenstein <eilong@broadcom.com>
  10  * Written by: Eliezer Tamir
  11  * Based on code from Michael Chan's bnx2 driver
  12  * UDP CSUM errata workaround by Arik Gendelman
  13  * Slowpath and fastpath rework by Vladislav Zolotarov
  14  * Statistics and Link management by Yitchak Gertner
  15  *
  16  */
  17
  18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  19
  20 #include <linux/etherdevice.h>
  21 #include <linux/if_vlan.h>
  22 #include <linux/interrupt.h>
  23 #include <linux/ip.h>
  24 #include <net/tcp.h>
  25 #include <net/ipv6.h>
  26 #include <net/ip6_checksum.h>
  27 #include <net/busy_poll.h>
  28 #include <linux/prefetch.h>
  29 #include "bnx2x_cmn.h"
  30 #include "bnx2x_init.h"
  31 #include "bnx2x_sp.h"
  32
  33 /**
  34  * bnx2x_move_fp - move content of the fastpath structure.
  35  *
  36  * @bp:         driver handle
  37  * @from:       source FP index
  38  * @to:         destination FP index
  39  *
  40  * Makes sure the contents of the bp->fp[to].napi is kept
  41  * intact. This is done by first copying the napi struct from
  42  * the target to the source, and then mem copying the entire
  43  * source onto the target. Update txdata pointers and related
  44  * content.
  45  */
  46 static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to)
  47 {
  48         struct bnx2x_fastpath *from_fp = &bp->fp[from];
  49         struct bnx2x_fastpath *to_fp = &bp->fp[to];
  50         struct bnx2x_sp_objs *from_sp_objs = &bp->sp_objs[from];
  51         struct bnx2x_sp_objs *to_sp_objs = &bp->sp_objs[to];
  52         struct bnx2x_fp_stats *from_fp_stats = &bp->fp_stats[from];
  53         struct bnx2x_fp_stats *to_fp_stats = &bp->fp_stats[to];
  54         int old_max_eth_txqs, new_max_eth_txqs;
  55         int old_txdata_index = 0, new_txdata_index = 0;
  56         struct bnx2x_agg_info *old_tpa_info = to_fp->tpa_info;
  57
  58         /* Copy the NAPI object as it has been already initialized */
  59         from_fp->napi = to_fp->napi;
  60
  61         /* Move bnx2x_fastpath contents */
  62         memcpy(to_fp, from_fp, sizeof(*to_fp));
  63         to_fp->index = to;
  64
  65         /* Retain the tpa_info of the original `to' version as we don't want
  66          * 2 FPs to contain the same tpa_info pointer.
  67          */
  68         to_fp->tpa_info = old_tpa_info;
  69
  70         /* move sp_objs contents as well, as their indices match fp ones */
  71         memcpy(to_sp_objs, from_sp_objs, sizeof(*to_sp_objs));
  72
  73         /* move fp_stats contents as well, as their indices match fp ones */
  74         memcpy(to_fp_stats, from_fp_stats, sizeof(*to_fp_stats));
  75
  76         /* Update txdata pointers in fp and move txdata content accordingly:
  77          * Each fp consumes 'max_cos' txdata structures, so the index should be
  78          * decremented by max_cos x delta.
  79          */
  80
  81         old_max_eth_txqs = BNX2X_NUM_ETH_QUEUES(bp) * (bp)->max_cos;
  82         new_max_eth_txqs = (BNX2X_NUM_ETH_QUEUES(bp) - from + to) *
  83                                 (bp)->max_cos;
  84         if (from == FCOE_IDX(bp)) {
  85                 old_txdata_index = old_max_eth_txqs + FCOE_TXQ_IDX_OFFSET;
  86                 new_txdata_index = new_max_eth_txqs + FCOE_TXQ_IDX_OFFSET;
  87         }
  88
  89         memcpy(&bp->bnx2x_txq[new_txdata_index],
  90                &bp->bnx2x_txq[old_txdata_index],
  91                sizeof(struct bnx2x_fp_txdata));
  92         to_fp->txdata_ptr[0] = &bp->bnx2x_txq[new_txdata_index];
  93 }
  94
  95 /**
  96  * bnx2x_fill_fw_str - Fill buffer with FW version string.
  97  *
  98  * @bp:        driver handle
  99  * @buf:       character buffer to fill with the fw name
 100  * @buf_len:   length of the above buffer
 101  *
 102  */
 103 void bnx2x_fill_fw_str(struct bnx2x *bp, char *buf, size_t buf_len)
 104 {
 105         if (IS_PF(bp)) {
 106                 u8 phy_fw_ver[PHY_FW_VER_LEN];
 107
 108                 phy_fw_ver[0] = '\0';
 109                 bnx2x_get_ext_phy_fw_version(&bp->link_params,
 110                                              phy_fw_ver, PHY_FW_VER_LEN);
 111                 strlcpy(buf, bp->fw_ver, buf_len);
 112                 snprintf(buf + strlen(bp->fw_ver), 32 - strlen(bp->fw_ver),
 113                          "bc %d.%d.%d%s%s",
 114                          (bp->common.bc_ver & 0xff0000) >> 16,
 115                          (bp->common.bc_ver & 0xff00) >> 8,
 116                          (bp->common.bc_ver & 0xff),
 117                          ((phy_fw_ver[0] != '\0') ? " phy " : ""), phy_fw_ver);
 118         } else {
 119                 bnx2x_vf_fill_fw_str(bp, buf, buf_len);
 120         }
 121 }
 122
 123 /**
 124  * bnx2x_shrink_eth_fp - guarantees fastpath structures stay intact
 125  *
 126  * @bp: driver handle
 127  * @delta:      number of eth queues which were not allocated
 128  */
 129 static void bnx2x_shrink_eth_fp(struct bnx2x *bp, int delta)
 130 {
 131         int i, cos, old_eth_num = BNX2X_NUM_ETH_QUEUES(bp);
 132
 133         /* Queue pointer cannot be re-set on an fp-basis, as moving pointer
 134          * backward along the array could cause memory to be overridden
 135          */
 136         for (cos = 1; cos < bp->max_cos; cos++) {
 137                 for (i = 0; i < old_eth_num - delta; i++) {
 138                         struct bnx2x_fastpath *fp = &bp->fp[i];
 139                         int new_idx = cos * (old_eth_num - delta) + i;
 140
 141                         memcpy(&bp->bnx2x_txq[new_idx], fp->txdata_ptr[cos],
 142                                sizeof(struct bnx2x_fp_txdata));
 143                         fp->txdata_ptr[cos] = &bp->bnx2x_txq[new_idx];
 144                 }
 145         }
 146 }
 147
 148 int load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */
 149
 150 /* free skb in the packet ring at pos idx
 151  * return idx of last bd freed
 152  */
 153 static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata,
 154                              u16 idx, unsigned int *pkts_compl,
 155                              unsigned int *bytes_compl)
 156 {
 157         struct sw_tx_bd *tx_buf = &txdata->tx_buf_ring[idx];
 158         struct eth_tx_start_bd *tx_start_bd;
 159         struct eth_tx_bd *tx_data_bd;
 160         struct sk_buff *skb = tx_buf->skb;
 161         u16 bd_idx = TX_BD(tx_buf->first_bd), new_cons;
 162         int nbd;
 163
 164         /* prefetch skb end pointer to speedup dev_kfree_skb() */
 165         prefetch(&skb->end);
 166
 167         DP(NETIF_MSG_TX_DONE, "fp[%d]: pkt_idx %d  buff @(%p)->skb %p\n",
 168            txdata->txq_index, idx, tx_buf, skb);
 169
 170         /* unmap first bd */
 171         tx_start_bd = &txdata->tx_desc_ring[bd_idx].start_bd;
 172         dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd),
 173                          BD_UNMAP_LEN(tx_start_bd), DMA_TO_DEVICE);
 174
 175         nbd = le16_to_cpu(tx_start_bd->nbd) - 1;
 176 #ifdef BNX2X_STOP_ON_ERROR
 177         if ((nbd - 1) > (MAX_SKB_FRAGS + 2)) {
 178                 BNX2X_ERR("BAD nbd!\n");
 179                 bnx2x_panic();
 180         }
 181 #endif
 182         new_cons = nbd + tx_buf->first_bd;
 183
 184         /* Get the next bd */
 185         bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 186
 187         /* Skip a parse bd... */
 188         --nbd;
 189         bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 190
 191         /* ...and the TSO split header bd since they have no mapping */
 192         if (tx_buf->flags & BNX2X_TSO_SPLIT_BD) {
 193                 --nbd;
 194                 bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 195         }
 196
 197         /* now free frags */
 198         while (nbd > 0) {
 199
 200                 tx_data_bd = &txdata->tx_desc_ring[bd_idx].reg_bd;
 201                 dma_unmap_page(&bp->pdev->dev, BD_UNMAP_ADDR(tx_data_bd),
 202                                BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
 203                 if (--nbd)
 204                         bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 205         }
 206
 207         /* release skb */
 208         WARN_ON(!skb);
 209         if (likely(skb)) {
 210                 (*pkts_compl)++;
 211                 (*bytes_compl) += skb->len;
 212         }
 213
 214         dev_kfree_skb_any(skb);
 215         tx_buf->first_bd = 0;
 216         tx_buf->skb = NULL;
 217
 218         return new_cons;
 219 }
 220
 221 int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata)
 222 {
 223         struct netdev_queue *txq;
 224         u16 hw_cons, sw_cons, bd_cons = txdata->tx_bd_cons;
 225         unsigned int pkts_compl = 0, bytes_compl = 0;
 226
 227 #ifdef BNX2X_STOP_ON_ERROR
 228         if (unlikely(bp->panic))
 229                 return -1;
 230 #endif
 231
 232         txq = netdev_get_tx_queue(bp->dev, txdata->txq_index);
 233         hw_cons = le16_to_cpu(*txdata->tx_cons_sb);
 234         sw_cons = txdata->tx_pkt_cons;
 235
 236         while (sw_cons != hw_cons) {
 237                 u16 pkt_cons;
 238
 239                 pkt_cons = TX_BD(sw_cons);
 240
 241                 DP(NETIF_MSG_TX_DONE,
 242                    "queue[%d]: hw_cons %u  sw_cons %u  pkt_cons %u\n",
 243                    txdata->txq_index, hw_cons, sw_cons, pkt_cons);
 244
 245                 bd_cons = bnx2x_free_tx_pkt(bp, txdata, pkt_cons,
 246                                             &pkts_compl, &bytes_compl);
 247
 248                 sw_cons++;
 249         }
 250
 251         netdev_tx_completed_queue(txq, pkts_compl, bytes_compl);
 252
 253         txdata->tx_pkt_cons = sw_cons;
 254         txdata->tx_bd_cons = bd_cons;
 255
 256         /* Need to make the tx_bd_cons update visible to start_xmit()
 257          * before checking for netif_tx_queue_stopped().  Without the
 258          * memory barrier, there is a small possibility that
 259          * start_xmit() will miss it and cause the queue to be stopped
 260          * forever.
 261          * On the other hand we need an rmb() here to ensure the proper
 262          * ordering of bit testing in the following
 263          * netif_tx_queue_stopped(txq) call.
 264          */
 265         smp_mb();
 266
 267         if (unlikely(netif_tx_queue_stopped(txq))) {
 268                 /* Taking tx_lock() is needed to prevent re-enabling the queue
 269                  * while it's empty. This could have happen if rx_action() gets
 270                  * suspended in bnx2x_tx_int() after the condition before
 271                  * netif_tx_wake_queue(), while tx_action (bnx2x_start_xmit()):
 272                  *
 273                  * stops the queue->sees fresh tx_bd_cons->releases the queue->
 274                  * sends some packets consuming the whole queue again->
 275                  * stops the queue
 276                  */
 277
 278                 __netif_tx_lock(txq, smp_processor_id());
 279
 280                 if ((netif_tx_queue_stopped(txq)) &&
 281                     (bp->state == BNX2X_STATE_OPEN) &&
 282                     (bnx2x_tx_avail(bp, txdata) >= MAX_DESC_PER_TX_PKT))
 283                         netif_tx_wake_queue(txq);
 284
 285                 __netif_tx_unlock(txq);
 286         }
 287         return 0;
 288 }
 289
 290 static inline void bnx2x_update_last_max_sge(struct bnx2x_fastpath *fp,
 291                                              u16 idx)
 292 {
 293         u16 last_max = fp->last_max_sge;
 294
 295         if (SUB_S16(idx, last_max) > 0)
 296                 fp->last_max_sge = idx;
 297 }
 298
 299 static inline void bnx2x_update_sge_prod(struct bnx2x_fastpath *fp,
 300                                          u16 sge_len,
 301                                          struct eth_end_agg_rx_cqe *cqe)
 302 {
 303         struct bnx2x *bp = fp->bp;
 304         u16 last_max, last_elem, first_elem;
 305         u16 delta = 0;
 306         u16 i;
 307
 308         if (!sge_len)
 309                 return;
 310
 311         /* First mark all used pages */
 312         for (i = 0; i < sge_len; i++)
 313                 BIT_VEC64_CLEAR_BIT(fp->sge_mask,
 314                         RX_SGE(le16_to_cpu(cqe->sgl_or_raw_data.sgl[i])));
 315
 316         DP(NETIF_MSG_RX_STATUS, "fp_cqe->sgl[%d] = %d\n",
 317            sge_len - 1, le16_to_cpu(cqe->sgl_or_raw_data.sgl[sge_len - 1]));
 318
 319         /* Here we assume that the last SGE index is the biggest */
 320         prefetch((void *)(fp->sge_mask));
 321         bnx2x_update_last_max_sge(fp,
 322                 le16_to_cpu(cqe->sgl_or_raw_data.sgl[sge_len - 1]));
 323
 324         last_max = RX_SGE(fp->last_max_sge);
 325         last_elem = last_max >> BIT_VEC64_ELEM_SHIFT;
 326         first_elem = RX_SGE(fp->rx_sge_prod) >> BIT_VEC64_ELEM_SHIFT;
 327
 328         /* If ring is not full */
 329         if (last_elem + 1 != first_elem)
 330                 last_elem++;
 331
 332         /* Now update the prod */
 333         for (i = first_elem; i != last_elem; i = NEXT_SGE_MASK_ELEM(i)) {
 334                 if (likely(fp->sge_mask[i]))
 335                         break;
 336
 337                 fp->sge_mask[i] = BIT_VEC64_ELEM_ONE_MASK;
 338                 delta += BIT_VEC64_ELEM_SZ;
 339         }
 340
 341         if (delta > 0) {
 342                 fp->rx_sge_prod += delta;
 343                 /* clear page-end entries */
 344                 bnx2x_clear_sge_mask_next_elems(fp);
 345         }
 346
 347         DP(NETIF_MSG_RX_STATUS,
 348            "fp->last_max_sge = %d  fp->rx_sge_prod = %d\n",
 349            fp->last_max_sge, fp->rx_sge_prod);
 350 }
 351
 352 /* Get Toeplitz hash value in the skb using the value from the
 353  * CQE (calculated by HW).
 354  */
 355 static u32 bnx2x_get_rxhash(const struct bnx2x *bp,
 356                             const struct eth_fast_path_rx_cqe *cqe,
 357                             bool *l4_rxhash)
 358 {
 359         /* Get Toeplitz hash from CQE */
 360         if ((bp->dev->features & NETIF_F_RXHASH) &&
 361             (cqe->status_flags & ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG)) {
 362                 enum eth_rss_hash_type htype;
 363
 364                 htype = cqe->status_flags & ETH_FAST_PATH_RX_CQE_RSS_HASH_TYPE;
 365                 *l4_rxhash = (htype == TCP_IPV4_HASH_TYPE) ||
 366                              (htype == TCP_IPV6_HASH_TYPE);
 367                 return le32_to_cpu(cqe->rss_hash_result);
 368         }
 369         *l4_rxhash = false;
 370         return 0;
 371 }
 372
 373 static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
 374                             u16 cons, u16 prod,
 375                             struct eth_fast_path_rx_cqe *cqe)
 376 {
 377         struct bnx2x *bp = fp->bp;
 378         struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons];
 379         struct sw_rx_bd *prod_rx_buf = &fp->rx_buf_ring[prod];
 380         struct eth_rx_bd *prod_bd = &fp->rx_desc_ring[prod];
 381         dma_addr_t mapping;
 382         struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
 383         struct sw_rx_bd *first_buf = &tpa_info->first_buf;
 384
 385         /* print error if current state != stop */
 386         if (tpa_info->tpa_state != BNX2X_TPA_STOP)
 387                 BNX2X_ERR("start of bin not in stop [%d]\n", queue);
 388
 389         /* Try to map an empty data buffer from the aggregation info  */
 390         mapping = dma_map_single(&bp->pdev->dev,
 391                                  first_buf->data + NET_SKB_PAD,
 392                                  fp->rx_buf_size, DMA_FROM_DEVICE);
 393         /*
 394          *  ...if it fails - move the skb from the consumer to the producer
 395          *  and set the current aggregation state as ERROR to drop it
 396          *  when TPA_STOP arrives.
 397          */
 398
 399         if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 400                 /* Move the BD from the consumer to the producer */
 401                 bnx2x_reuse_rx_data(fp, cons, prod);
 402                 tpa_info->tpa_state = BNX2X_TPA_ERROR;
 403                 return;
 404         }
 405
 406         /* move empty data from pool to prod */
 407         prod_rx_buf->data = first_buf->data;
 408         dma_unmap_addr_set(prod_rx_buf, mapping, mapping);
 409         /* point prod_bd to new data */
 410         prod_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
 411         prod_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
 412
 413         /* move partial skb from cons to pool (don't unmap yet) */
 414         *first_buf = *cons_rx_buf;
 415
 416         /* mark bin state as START */
 417         tpa_info->parsing_flags =
 418                 le16_to_cpu(cqe->pars_flags.flags);
 419         tpa_info->vlan_tag = le16_to_cpu(cqe->vlan_tag);
 420         tpa_info->tpa_state = BNX2X_TPA_START;
 421         tpa_info->len_on_bd = le16_to_cpu(cqe->len_on_bd);
 422         tpa_info->placement_offset = cqe->placement_offset;
 423         tpa_info->rxhash = bnx2x_get_rxhash(bp, cqe, &tpa_info->l4_rxhash);
 424         if (fp->mode == TPA_MODE_GRO) {
 425                 u16 gro_size = le16_to_cpu(cqe->pkt_len_or_gro_seg_len);
 426                 tpa_info->full_page = SGE_PAGES / gro_size * gro_size;
 427                 tpa_info->gro_size = gro_size;
 428         }
 429
 430 #ifdef BNX2X_STOP_ON_ERROR
 431         fp->tpa_queue_used |= (1 << queue);
 432 #ifdef _ASM_GENERIC_INT_L64_H
 433         DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n",
 434 #else
 435         DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%llx\n",
 436 #endif
 437            fp->tpa_queue_used);
 438 #endif
 439 }
 440
 441 /* Timestamp option length allowed for TPA aggregation:
 442  *
 443  *              nop nop kind length echo val
 444  */
 445 #define TPA_TSTAMP_OPT_LEN      12
 446 /**
 447  * bnx2x_set_gro_params - compute GRO values
 448  *
 449  * @skb:                packet skb
 450  * @parsing_flags:      parsing flags from the START CQE
 451  * @len_on_bd:          total length of the first packet for the
 452  *                      aggregation.
 453  * @pkt_len:            length of all segments
 454  *
 455  * Approximate value of the MSS for this aggregation calculated using
 456  * the first packet of it.
 457  * Compute number of aggregated segments, and gso_type.
 458  */
 459 static void bnx2x_set_gro_params(struct sk_buff *skb, u16 parsing_flags,
 460                                  u16 len_on_bd, unsigned int pkt_len,
 461                                  u16 num_of_coalesced_segs)
 462 {
 463         /* TPA aggregation won't have either IP options or TCP options
 464          * other than timestamp or IPv6 extension headers.
 465          */
 466         u16 hdrs_len = ETH_HLEN + sizeof(struct tcphdr);
 467
 468         if (GET_FLAG(parsing_flags, PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) ==
 469             PRS_FLAG_OVERETH_IPV6) {
 470                 hdrs_len += sizeof(struct ipv6hdr);
 471                 skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
 472         } else {
 473                 hdrs_len += sizeof(struct iphdr);
 474                 skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
 475         }
 476
 477         /* Check if there was a TCP timestamp, if there is it's will
 478          * always be 12 bytes length: nop nop kind length echo val.
 479          *
 480          * Otherwise FW would close the aggregation.
 481          */
 482         if (parsing_flags & PARSING_FLAGS_TIME_STAMP_EXIST_FLAG)
 483                 hdrs_len += TPA_TSTAMP_OPT_LEN;
 484
 485         skb_shinfo(skb)->gso_size = len_on_bd - hdrs_len;
 486
 487         /* tcp_gro_complete() will copy NAPI_GRO_CB(skb)->count
 488          * to skb_shinfo(skb)->gso_segs
 489          */
 490         NAPI_GRO_CB(skb)->count = num_of_coalesced_segs;
 491 }
 492
 493 static int bnx2x_alloc_rx_sge(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 494                               u16 index, gfp_t gfp_mask)
 495 {
 496         struct page *page = alloc_pages(gfp_mask, PAGES_PER_SGE_SHIFT);
 497         struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
 498         struct eth_rx_sge *sge = &fp->rx_sge_ring[index];
 499         dma_addr_t mapping;
 500
 501         if (unlikely(page == NULL)) {
 502                 BNX2X_ERR("Can't alloc sge\n");
 503                 return -ENOMEM;
 504         }
 505
 506         mapping = dma_map_page(&bp->pdev->dev, page, 0,
 507                                SGE_PAGES, DMA_FROM_DEVICE);
 508         if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 509                 __free_pages(page, PAGES_PER_SGE_SHIFT);
 510                 BNX2X_ERR("Can't map sge\n");
 511                 return -ENOMEM;
 512         }
 513
 514         sw_buf->page = page;
 515         dma_unmap_addr_set(sw_buf, mapping, mapping);
 516
 517         sge->addr_hi = cpu_to_le32(U64_HI(mapping));
 518         sge->addr_lo = cpu_to_le32(U64_LO(mapping));
 519
 520         return 0;
 521 }
 522
 523 static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 524                                struct bnx2x_agg_info *tpa_info,
 525                                u16 pages,
 526                                struct sk_buff *skb,
 527                                struct eth_end_agg_rx_cqe *cqe,
 528                                u16 cqe_idx)
 529 {
 530         struct sw_rx_page *rx_pg, old_rx_pg;
 531         u32 i, frag_len, frag_size;
 532         int err, j, frag_id = 0;
 533         u16 len_on_bd = tpa_info->len_on_bd;
 534         u16 full_page = 0, gro_size = 0;
 535
 536         frag_size = le16_to_cpu(cqe->pkt_len) - len_on_bd;
 537
 538         if (fp->mode == TPA_MODE_GRO) {
 539                 gro_size = tpa_info->gro_size;
 540                 full_page = tpa_info->full_page;
 541         }
 542
 543         /* This is needed in order to enable forwarding support */
 544         if (frag_size)
 545                 bnx2x_set_gro_params(skb, tpa_info->parsing_flags, len_on_bd,
 546                                      le16_to_cpu(cqe->pkt_len),
 547                                      le16_to_cpu(cqe->num_of_coalesced_segs));
 548
 549 #ifdef BNX2X_STOP_ON_ERROR
 550         if (pages > min_t(u32, 8, MAX_SKB_FRAGS) * SGE_PAGES) {
 551                 BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n",
 552                           pages, cqe_idx);
 553                 BNX2X_ERR("cqe->pkt_len = %d\n", cqe->pkt_len);
 554                 bnx2x_panic();
 555                 return -EINVAL;
 556         }
 557 #endif
 558
 559         /* Run through the SGL and compose the fragmented skb */
 560         for (i = 0, j = 0; i < pages; i += PAGES_PER_SGE, j++) {
 561                 u16 sge_idx = RX_SGE(le16_to_cpu(cqe->sgl_or_raw_data.sgl[j]));
 562
 563                 /* FW gives the indices of the SGE as if the ring is an array
 564                    (meaning that "next" element will consume 2 indices) */
 565                 if (fp->mode == TPA_MODE_GRO)
 566                         frag_len = min_t(u32, frag_size, (u32)full_page);
 567                 else /* LRO */
 568                         frag_len = min_t(u32, frag_size, (u32)SGE_PAGES);
 569
 570                 rx_pg = &fp->rx_page_ring[sge_idx];
 571                 old_rx_pg = *rx_pg;
 572
 573                 /* If we fail to allocate a substitute page, we simply stop
 574                    where we are and drop the whole packet */
 575                 err = bnx2x_alloc_rx_sge(bp, fp, sge_idx, GFP_ATOMIC);
 576                 if (unlikely(err)) {
 577                         bnx2x_fp_qstats(bp, fp)->rx_skb_alloc_failed++;
 578                         return err;
 579                 }
 580
 581                 /* Unmap the page as we're going to pass it to the stack */
 582                 dma_unmap_page(&bp->pdev->dev,
 583                                dma_unmap_addr(&old_rx_pg, mapping),
 584                                SGE_PAGES, DMA_FROM_DEVICE);
 585                 /* Add one frag and update the appropriate fields in the skb */
 586                 if (fp->mode == TPA_MODE_LRO)
 587                         skb_fill_page_desc(skb, j, old_rx_pg.page, 0, frag_len);
 588                 else { /* GRO */
 589                         int rem;
 590                         int offset = 0;
 591                         for (rem = frag_len; rem > 0; rem -= gro_size) {
 592                                 int len = rem > gro_size ? gro_size : rem;
 593                                 skb_fill_page_desc(skb, frag_id++,
 594                                                    old_rx_pg.page, offset, len);
 595                                 if (offset)
 596                                         get_page(old_rx_pg.page);
 597                                 offset += len;
 598                         }
 599                 }
 600
 601                 skb->data_len += frag_len;
 602                 skb->truesize += SGE_PAGES;
 603                 skb->len += frag_len;
 604
 605                 frag_size -= frag_len;
 606         }
 607
 608         return 0;
 609 }
 610
 611 static void bnx2x_frag_free(const struct bnx2x_fastpath *fp, void *data)
 612 {
 613         if (fp->rx_frag_size)
 614                 put_page(virt_to_head_page(data));
 615         else
 616                 kfree(data);
 617 }
 618
 619 static void *bnx2x_frag_alloc(const struct bnx2x_fastpath *fp, gfp_t gfp_mask)
 620 {
 621         if (fp->rx_frag_size) {
 622                 /* GFP_KERNEL allocations are used only during initialization */
 623                 if (unlikely(gfp_mask & __GFP_WAIT))
 624                         return (void *)__get_free_page(gfp_mask);
 625
 626                 return netdev_alloc_frag(fp->rx_frag_size);
 627         }
 628
 629         return kmalloc(fp->rx_buf_size + NET_SKB_PAD, gfp_mask);
 630 }
 631
 632 #ifdef CONFIG_INET
 633 static void bnx2x_gro_ip_csum(struct bnx2x *bp, struct sk_buff *skb)
 634 {
 635         const struct iphdr *iph = ip_hdr(skb);
 636         struct tcphdr *th;
 637
 638         skb_set_transport_header(skb, sizeof(struct iphdr));
 639         th = tcp_hdr(skb);
 640
 641         th->check = ~tcp_v4_check(skb->len - skb_transport_offset(skb),
 642                                   iph->saddr, iph->daddr, 0);
 643 }
 644
 645 static void bnx2x_gro_ipv6_csum(struct bnx2x *bp, struct sk_buff *skb)
 646 {
 647         struct ipv6hdr *iph = ipv6_hdr(skb);
 648         struct tcphdr *th;
 649
 650         skb_set_transport_header(skb, sizeof(struct ipv6hdr));
 651         th = tcp_hdr(skb);
 652
 653         th->check = ~tcp_v6_check(skb->len - skb_transport_offset(skb),
 654                                   &iph->saddr, &iph->daddr, 0);
 655 }
 656
 657 static void bnx2x_gro_csum(struct bnx2x *bp, struct sk_buff *skb,
 658                             void (*gro_func)(struct bnx2x*, struct sk_buff*))
 659 {
 660         skb_set_network_header(skb, 0);
 661         gro_func(bp, skb);
 662         tcp_gro_complete(skb);
 663 }
 664 #endif
 665
 666 static void bnx2x_gro_receive(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 667                                struct sk_buff *skb)
 668 {
 669 #ifdef CONFIG_INET
 670         if (skb_shinfo(skb)->gso_size) {
 671                 switch (be16_to_cpu(skb->protocol)) {
 672                 case ETH_P_IP:
 673                         bnx2x_gro_csum(bp, skb, bnx2x_gro_ip_csum);
 674                         break;
 675                 case ETH_P_IPV6:
 676                         bnx2x_gro_csum(bp, skb, bnx2x_gro_ipv6_csum);
 677                         break;
 678                 default:
 679                         BNX2X_ERR("Error: FW GRO supports only IPv4/IPv6, not 0x%04x\n",
 680                                   be16_to_cpu(skb->protocol));
 681                 }
 682         }
 683 #endif
 684         skb_record_rx_queue(skb, fp->rx_queue);
 685         napi_gro_receive(&fp->napi, skb);
 686 }
 687
 688 static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 689                            struct bnx2x_agg_info *tpa_info,
 690                            u16 pages,
 691                            struct eth_end_agg_rx_cqe *cqe,
 692                            u16 cqe_idx)
 693 {
 694         struct sw_rx_bd *rx_buf = &tpa_info->first_buf;
 695         u8 pad = tpa_info->placement_offset;
 696         u16 len = tpa_info->len_on_bd;
 697         struct sk_buff *skb = NULL;
 698         u8 *new_data, *data = rx_buf->data;
 699         u8 old_tpa_state = tpa_info->tpa_state;
 700
 701         tpa_info->tpa_state = BNX2X_TPA_STOP;
 702
 703         /* If we there was an error during the handling of the TPA_START -
 704          * drop this aggregation.
 705          */
 706         if (old_tpa_state == BNX2X_TPA_ERROR)
 707                 goto drop;
 708
 709         /* Try to allocate the new data */
 710         new_data = bnx2x_frag_alloc(fp, GFP_ATOMIC);
 711         /* Unmap skb in the pool anyway, as we are going to change
 712            pool entry status to BNX2X_TPA_STOP even if new skb allocation
 713            fails. */
 714         dma_unmap_single(&bp->pdev->dev, dma_unmap_addr(rx_buf, mapping),
 715                          fp->rx_buf_size, DMA_FROM_DEVICE);
 716         if (likely(new_data))
 717                 skb = build_skb(data, fp->rx_frag_size);
 718
 719         if (likely(skb)) {
 720 #ifdef BNX2X_STOP_ON_ERROR
 721                 if (pad + len > fp->rx_buf_size) {
 722                         BNX2X_ERR("skb_put is about to fail...  pad %d  len %d  rx_buf_size %d\n",
 723                                   pad, len, fp->rx_buf_size);
 724                         bnx2x_panic();
 725                         return;
 726                 }
 727 #endif
 728
 729                 skb_reserve(skb, pad + NET_SKB_PAD);
 730                 skb_put(skb, len);
 731                 skb->rxhash = tpa_info->rxhash;
 732                 skb->l4_rxhash = tpa_info->l4_rxhash;
 733
 734                 skb->protocol = eth_type_trans(skb, bp->dev);
 735                 skb->ip_summed = CHECKSUM_UNNECESSARY;
 736
 737                 if (!bnx2x_fill_frag_skb(bp, fp, tpa_info, pages,
 738                                          skb, cqe, cqe_idx)) {
 739                         if (tpa_info->parsing_flags & PARSING_FLAGS_VLAN)
 740                                 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tpa_info->vlan_tag);
 741                         bnx2x_gro_receive(bp, fp, skb);
 742                 } else {
 743                         DP(NETIF_MSG_RX_STATUS,
 744                            "Failed to allocate new pages - dropping packet!\n");
 745                         dev_kfree_skb_any(skb);
 746                 }
 747
 748                 /* put new data in bin */
 749                 rx_buf->data = new_data;
 750
 751                 return;
 752         }
 753         bnx2x_frag_free(fp, new_data);
 754 drop:
 755         /* drop the packet and keep the buffer in the bin */
 756         DP(NETIF_MSG_RX_STATUS,
 757            "Failed to allocate or map a new skb - dropping packet!\n");
 758         bnx2x_fp_stats(bp, fp)->eth_q_stats.rx_skb_alloc_failed++;
 759 }
 760
 761 static int bnx2x_alloc_rx_data(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 762                                u16 index, gfp_t gfp_mask)
 763 {
 764         u8 *data;
 765         struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[index];
 766         struct eth_rx_bd *rx_bd = &fp->rx_desc_ring[index];
 767         dma_addr_t mapping;
 768
 769         data = bnx2x_frag_alloc(fp, gfp_mask);
 770         if (unlikely(data == NULL))
 771                 return -ENOMEM;
 772
 773         mapping = dma_map_single(&bp->pdev->dev, data + NET_SKB_PAD,
 774                                  fp->rx_buf_size,
 775                                  DMA_FROM_DEVICE);
 776         if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 777                 bnx2x_frag_free(fp, data);
 778                 BNX2X_ERR("Can't map rx data\n");
 779                 return -ENOMEM;
 780         }
 781
 782         rx_buf->data = data;
 783         dma_unmap_addr_set(rx_buf, mapping, mapping);
 784
 785         rx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
 786         rx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
 787
 788         return 0;
 789 }
 790
 791 static
 792 void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe,
 793                                  struct bnx2x_fastpath *fp,
 794                                  struct bnx2x_eth_q_stats *qstats)
 795 {
 796         /* Do nothing if no L4 csum validation was done.
 797          * We do not check whether IP csum was validated. For IPv4 we assume
 798          * that if the card got as far as validating the L4 csum, it also
 799          * validated the IP csum. IPv6 has no IP csum.
 800          */
 801         if (cqe->fast_path_cqe.status_flags &
 802             ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)
 803                 return;
 804
 805         /* If L4 validation was done, check if an error was found. */
 806
 807         if (cqe->fast_path_cqe.type_error_flags &
 808             (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG |
 809              ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
 810                 qstats->hw_csum_err++;
 811         else
 812                 skb->ip_summed = CHECKSUM_UNNECESSARY;
 813 }
 814
 815 int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 816 {
 817         struct bnx2x *bp = fp->bp;
 818         u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
 819         u16 sw_comp_cons, sw_comp_prod;
 820         int rx_pkt = 0;
 821         union eth_rx_cqe *cqe;
 822         struct eth_fast_path_rx_cqe *cqe_fp;
 823
 824 #ifdef BNX2X_STOP_ON_ERROR
 825         if (unlikely(bp->panic))
 826                 return 0;
 827 #endif
 828
 829         bd_cons = fp->rx_bd_cons;
 830         bd_prod = fp->rx_bd_prod;
 831         bd_prod_fw = bd_prod;
 832         sw_comp_cons = fp->rx_comp_cons;
 833         sw_comp_prod = fp->rx_comp_prod;
 834
 835         comp_ring_cons = RCQ_BD(sw_comp_cons);
 836         cqe = &fp->rx_comp_ring[comp_ring_cons];
 837         cqe_fp = &cqe->fast_path_cqe;
 838
 839         DP(NETIF_MSG_RX_STATUS,
 840            "queue[%d]: sw_comp_cons %u\n", fp->index, sw_comp_cons);
 841
 842         while (BNX2X_IS_CQE_COMPLETED(cqe_fp)) {
 843                 struct sw_rx_bd *rx_buf = NULL;
 844                 struct sk_buff *skb;
 845                 u8 cqe_fp_flags;
 846                 enum eth_rx_cqe_type cqe_fp_type;
 847                 u16 len, pad, queue;
 848                 u8 *data;
 849                 bool l4_rxhash;
 850
 851 #ifdef BNX2X_STOP_ON_ERROR
 852                 if (unlikely(bp->panic))
 853                         return 0;
 854 #endif
 855
 856                 bd_prod = RX_BD(bd_prod);
 857                 bd_cons = RX_BD(bd_cons);
 858
 859                 cqe_fp_flags = cqe_fp->type_error_flags;
 860                 cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
 861
 862                 DP(NETIF_MSG_RX_STATUS,
 863                    "CQE type %x  err %x  status %x  queue %x  vlan %x  len %u\n",
 864                    CQE_TYPE(cqe_fp_flags),
 865                    cqe_fp_flags, cqe_fp->status_flags,
 866                    le32_to_cpu(cqe_fp->rss_hash_result),
 867                    le16_to_cpu(cqe_fp->vlan_tag),
 868                    le16_to_cpu(cqe_fp->pkt_len_or_gro_seg_len));
 869
 870                 /* is this a slowpath msg? */
 871                 if (unlikely(CQE_TYPE_SLOW(cqe_fp_type))) {
 872                         bnx2x_sp_event(fp, cqe);
 873                         goto next_cqe;
 874                 }
 875
 876                 rx_buf = &fp->rx_buf_ring[bd_cons];
 877                 data = rx_buf->data;
 878
 879                 if (!CQE_TYPE_FAST(cqe_fp_type)) {
 880                         struct bnx2x_agg_info *tpa_info;
 881                         u16 frag_size, pages;
 882 #ifdef BNX2X_STOP_ON_ERROR
 883                         /* sanity check */
 884                         if (fp->disable_tpa &&
 885                             (CQE_TYPE_START(cqe_fp_type) ||
 886                              CQE_TYPE_STOP(cqe_fp_type)))
 887                                 BNX2X_ERR("START/STOP packet while disable_tpa type %x\n",
 888                                           CQE_TYPE(cqe_fp_type));
 889 #endif
 890
 891                         if (CQE_TYPE_START(cqe_fp_type)) {
 892                                 u16 queue = cqe_fp->queue_index;
 893                                 DP(NETIF_MSG_RX_STATUS,
 894                                    "calling tpa_start on queue %d\n",
 895                                    queue);
 896
 897                                 bnx2x_tpa_start(fp, queue,
 898                                                 bd_cons, bd_prod,
 899                                                 cqe_fp);
 900
 901                                 goto next_rx;
 902                         }
 903                         queue = cqe->end_agg_cqe.queue_index;
 904                         tpa_info = &fp->tpa_info[queue];
 905                         DP(NETIF_MSG_RX_STATUS,
 906                            "calling tpa_stop on queue %d\n",
 907                            queue);
 908
 909                         frag_size = le16_to_cpu(cqe->end_agg_cqe.pkt_len) -
 910                                     tpa_info->len_on_bd;
 911
 912                         if (fp->mode == TPA_MODE_GRO)
 913                                 pages = (frag_size + tpa_info->full_page - 1) /
 914                                          tpa_info->full_page;
 915                         else
 916                                 pages = SGE_PAGE_ALIGN(frag_size) >>
 917                                         SGE_PAGE_SHIFT;
 918
 919                         bnx2x_tpa_stop(bp, fp, tpa_info, pages,
 920                                        &cqe->end_agg_cqe, comp_ring_cons);
 921 #ifdef BNX2X_STOP_ON_ERROR
 922                         if (bp->panic)
 923                                 return 0;
 924 #endif
 925
 926                         bnx2x_update_sge_prod(fp, pages, &cqe->end_agg_cqe);
 927                         goto next_cqe;
 928                 }
 929                 /* non TPA */
 930                 len = le16_to_cpu(cqe_fp->pkt_len_or_gro_seg_len);
 931                 pad = cqe_fp->placement_offset;
 932                 dma_sync_single_for_cpu(&bp->pdev->dev,
 933                                         dma_unmap_addr(rx_buf, mapping),
 934                                         pad + RX_COPY_THRESH,
 935                                         DMA_FROM_DEVICE);
 936                 pad += NET_SKB_PAD;
 937                 prefetch(data + pad); /* speedup eth_type_trans() */
 938                 /* is this an error packet? */
 939                 if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
 940                         DP(NETIF_MSG_RX_ERR | NETIF_MSG_RX_STATUS,
 941                            "ERROR  flags %x  rx packet %u\n",
 942                            cqe_fp_flags, sw_comp_cons);
 943                         bnx2x_fp_qstats(bp, fp)->rx_err_discard_pkt++;
 944                         goto reuse_rx;
 945                 }
 946
 947                 /* Since we don't have a jumbo ring
 948                  * copy small packets if mtu > 1500
 949                  */
 950                 if ((bp->dev->mtu > ETH_MAX_PACKET_SIZE) &&
 951                     (len <= RX_COPY_THRESH)) {
 952                         skb = netdev_alloc_skb_ip_align(bp->dev, len);
 953                         if (skb == NULL) {
 954                                 DP(NETIF_MSG_RX_ERR | NETIF_MSG_RX_STATUS,
 955                                    "ERROR  packet dropped because of alloc failure\n");
 956                                 bnx2x_fp_qstats(bp, fp)->rx_skb_alloc_failed++;
 957                                 goto reuse_rx;
 958                         }
 959                         memcpy(skb->data, data + pad, len);
 960                         bnx2x_reuse_rx_data(fp, bd_cons, bd_prod);
 961                 } else {
 962                         if (likely(bnx2x_alloc_rx_data(bp, fp, bd_prod,
 963                                                        GFP_ATOMIC) == 0)) {
 964                                 dma_unmap_single(&bp->pdev->dev,
 965                                                  dma_unmap_addr(rx_buf, mapping),
 966                                                  fp->rx_buf_size,
 967                                                  DMA_FROM_DEVICE);
 968                                 skb = build_skb(data, fp->rx_frag_size);
 969                                 if (unlikely(!skb)) {
 970                                         bnx2x_frag_free(fp, data);
 971                                         bnx2x_fp_qstats(bp, fp)->
 972                                                         rx_skb_alloc_failed++;
 973                                         goto next_rx;
 974                                 }
 975                                 skb_reserve(skb, pad);
 976                         } else {
 977                                 DP(NETIF_MSG_RX_ERR | NETIF_MSG_RX_STATUS,
 978                                    "ERROR  packet dropped because of alloc failure\n");
 979                                 bnx2x_fp_qstats(bp, fp)->rx_skb_alloc_failed++;
 980 reuse_rx:
 981                                 bnx2x_reuse_rx_data(fp, bd_cons, bd_prod);
 982                                 goto next_rx;
 983                         }
 984                 }
 985
 986                 skb_put(skb, len);
 987                 skb->protocol = eth_type_trans(skb, bp->dev);
 988
 989                 /* Set Toeplitz hash for a none-LRO skb */
 990                 skb->rxhash = bnx2x_get_rxhash(bp, cqe_fp, &l4_rxhash);
 991                 skb->l4_rxhash = l4_rxhash;
 992
 993                 skb_checksum_none_assert(skb);
 994
 995                 if (bp->dev->features & NETIF_F_RXCSUM)
 996                         bnx2x_csum_validate(skb, cqe, fp,
 997                                             bnx2x_fp_qstats(bp, fp));
 998
 999                 skb_record_rx_queue(skb, fp->rx_queue);
1000
1001                 if (le16_to_cpu(cqe_fp->pars_flags.flags) &
1002                     PARSING_FLAGS_VLAN)
1003                         __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
1004                                                le16_to_cpu(cqe_fp->vlan_tag));
1005
1006                 skb_mark_napi_id(skb, &fp->napi);
1007
1008                 if (bnx2x_fp_ll_polling(fp))
1009                         netif_receive_skb(skb);
1010                 else
1011                         napi_gro_receive(&fp->napi, skb);
1012 next_rx:
1013                 rx_buf->data = NULL;
1014
1015                 bd_cons = NEXT_RX_IDX(bd_cons);
1016                 bd_prod = NEXT_RX_IDX(bd_prod);
1017                 bd_prod_fw = NEXT_RX_IDX(bd_prod_fw);
1018                 rx_pkt++;
1019 next_cqe:
1020                 sw_comp_prod = NEXT_RCQ_IDX(sw_comp_prod);
1021                 sw_comp_cons = NEXT_RCQ_IDX(sw_comp_cons);
1022
1023                 /* mark CQE as free */
1024                 BNX2X_SEED_CQE(cqe_fp);
1025
1026                 if (rx_pkt == budget)
1027                         break;
1028
1029                 comp_ring_cons = RCQ_BD(sw_comp_cons);
1030                 cqe = &fp->rx_comp_ring[comp_ring_cons];
1031                 cqe_fp = &cqe->fast_path_cqe;
1032         } /* while */
1033
1034         fp->rx_bd_cons = bd_cons;
1035         fp->rx_bd_prod = bd_prod_fw;
1036         fp->rx_comp_cons = sw_comp_cons;
1037         fp->rx_comp_prod = sw_comp_prod;
1038
1039         /* Update producers */
1040         bnx2x_update_rx_prod(bp, fp, bd_prod_fw, sw_comp_prod,
1041                              fp->rx_sge_prod);
1042
1043         fp->rx_pkt += rx_pkt;
1044         fp->rx_calls++;
1045
1046         return rx_pkt;
1047 }
1048
1049 static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie)
1050 {
1051         struct bnx2x_fastpath *fp = fp_cookie;
1052         struct bnx2x *bp = fp->bp;
1053         u8 cos;
1054
1055         DP(NETIF_MSG_INTR,
1056            "got an MSI-X interrupt on IDX:SB [fp %d fw_sd %d igusb %d]\n",
1057            fp->index, fp->fw_sb_id, fp->igu_sb_id);
1058
1059         bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
1060
1061 #ifdef BNX2X_STOP_ON_ERROR
1062         if (unlikely(bp->panic))
1063                 return IRQ_HANDLED;
1064 #endif
1065
1066         /* Handle Rx and Tx according to MSI-X vector */
1067         for_each_cos_in_tx_queue(fp, cos)
1068                 prefetch(fp->txdata_ptr[cos]->tx_cons_sb);
1069
1070         prefetch(&fp->sb_running_index[SM_RX_ID]);
1071         napi_schedule(&bnx2x_fp(bp, fp->index, napi));
1072
1073         return IRQ_HANDLED;
1074 }
1075
1076 /* HW Lock for shared dual port PHYs */
1077 void bnx2x_acquire_phy_lock(struct bnx2x *bp)
1078 {
1079         mutex_lock(&bp->port.phy_mutex);
1080
1081         bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_MDIO);
1082 }
1083
1084 void bnx2x_release_phy_lock(struct bnx2x *bp)
1085 {
1086         bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_MDIO);
1087
1088         mutex_unlock(&bp->port.phy_mutex);
1089 }
1090
1091 /* calculates MF speed according to current linespeed and MF configuration */
1092 u16 bnx2x_get_mf_speed(struct bnx2x *bp)
1093 {
1094         u16 line_speed = bp->link_vars.line_speed;
1095         if (IS_MF(bp)) {
1096                 u16 maxCfg = bnx2x_extract_max_cfg(bp,
1097                                                    bp->mf_config[BP_VN(bp)]);
1098
1099                 /* Calculate the current MAX line speed limit for the MF
1100                  * devices
1101                  */
1102                 if (IS_MF_SI(bp))
1103                         line_speed = (line_speed * maxCfg) / 100;
1104                 else { /* SD mode */
1105                         u16 vn_max_rate = maxCfg * 100;
1106
1107                         if (vn_max_rate < line_speed)
1108                                 line_speed = vn_max_rate;
1109                 }
1110         }
1111
1112         return line_speed;
1113 }
1114
1115 /**
1116  * bnx2x_fill_report_data - fill link report data to report
1117  *
1118  * @bp:         driver handle
1119  * @data:       link state to update
1120  *
1121  * It uses a none-atomic bit operations because is called under the mutex.
1122  */
1123 static void bnx2x_fill_report_data(struct bnx2x *bp,
1124                                    struct bnx2x_link_report_data *data)
1125 {
1126         u16 line_speed = bnx2x_get_mf_speed(bp);
1127
1128         memset(data, 0, sizeof(*data));
1129
1130         /* Fill the report data: effective line speed */
1131         data->line_speed = line_speed;
1132
1133         /* Link is down */
1134         if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS))
1135                 __set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
1136                           &data->link_report_flags);
1137
1138         /* Full DUPLEX */
1139         if (bp->link_vars.duplex == DUPLEX_FULL)
1140                 __set_bit(BNX2X_LINK_REPORT_FD, &data->link_report_flags);
1141
1142         /* Rx Flow Control is ON */
1143         if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX)
1144                 __set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
1145
1146         /* Tx Flow Control is ON */
1147         if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
1148                 __set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
1149 }
1150
1151 /**
1152  * bnx2x_link_report - report link status to OS.
1153  *
1154  * @bp:         driver handle
1155  *
1156  * Calls the __bnx2x_link_report() under the same locking scheme
1157  * as a link/PHY state managing code to ensure a consistent link
1158  * reporting.
1159  */
1160
1161 void bnx2x_link_report(struct bnx2x *bp)
1162 {
1163         bnx2x_acquire_phy_lock(bp);
1164         __bnx2x_link_report(bp);
1165         bnx2x_release_phy_lock(bp);
1166 }
1167
1168 /**
1169  * __bnx2x_link_report - report link status to OS.
1170  *
1171  * @bp:         driver handle
1172  *
1173  * None atomic implementation.
1174  * Should be called under the phy_lock.
1175  */
1176 void __bnx2x_link_report(struct bnx2x *bp)
1177 {
1178         struct bnx2x_link_report_data cur_data;
1179
1180         /* reread mf_cfg */
1181         if (IS_PF(bp) && !CHIP_IS_E1(bp))
1182                 bnx2x_read_mf_cfg(bp);
1183
1184         /* Read the current link report info */
1185         bnx2x_fill_report_data(bp, &cur_data);
1186
1187         /* Don't report link down or exactly the same link status twice */
1188         if (!memcmp(&cur_data, &bp->last_reported_link, sizeof(cur_data)) ||
1189             (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
1190                       &bp->last_reported_link.link_report_flags) &&
1191              test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
1192                       &cur_data.link_report_flags)))
1193                 return;
1194
1195         bp->link_cnt++;
1196
1197         /* We are going to report a new link parameters now -
1198          * remember the current data for the next time.
1199          */
1200         memcpy(&bp->last_reported_link, &cur_data, sizeof(cur_data));
1201
1202         if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
1203                      &cur_data.link_report_flags)) {
1204                 netif_carrier_off(bp->dev);
1205                 netdev_err(bp->dev, "NIC Link is Down\n");
1206                 return;
1207         } else {
1208                 const char *duplex;
1209                 const char *flow;
1210
1211                 netif_carrier_on(bp->dev);
1212
1213                 if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
1214                                        &cur_data.link_report_flags))
1215                         duplex = "full";
1216                 else
1217                         duplex = "half";
1218
1219                 /* Handle the FC at the end so that only these flags would be
1220                  * possibly set. This way we may easily check if there is no FC
1221                  * enabled.
1222                  */
1223                 if (cur_data.link_report_flags) {
1224                         if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
1225                                      &cur_data.link_report_flags)) {
1226                                 if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
1227                                      &cur_data.link_report_flags))
1228                                         flow = "ON - receive & transmit";
1229                                 else
1230                                         flow = "ON - receive";
1231                         } else {
1232                                 flow = "ON - transmit";
1233                         }
1234                 } else {
1235                         flow = "none";
1236                 }
1237                 netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n",
1238                             cur_data.line_speed, duplex, flow);
1239         }
1240 }
1241
1242 static void bnx2x_set_next_page_sgl(struct bnx2x_fastpath *fp)
1243 {
1244         int i;
1245
1246         for (i = 1; i <= NUM_RX_SGE_PAGES; i++) {
1247                 struct eth_rx_sge *sge;
1248
1249                 sge = &fp->rx_sge_ring[RX_SGE_CNT * i - 2];
1250                 sge->addr_hi =
1251                         cpu_to_le32(U64_HI(fp->rx_sge_mapping +
1252                         BCM_PAGE_SIZE*(i % NUM_RX_SGE_PAGES)));
1253
1254                 sge->addr_lo =
1255                         cpu_to_le32(U64_LO(fp->rx_sge_mapping +
1256                         BCM_PAGE_SIZE*(i % NUM_RX_SGE_PAGES)));
1257         }
1258 }
1259
1260 static void bnx2x_free_tpa_pool(struct bnx2x *bp,
1261                                 struct bnx2x_fastpath *fp, int last)
1262 {
1263         int i;
1264
1265         for (i = 0; i < last; i++) {
1266                 struct bnx2x_agg_info *tpa_info = &fp->tpa_info[i];
1267                 struct sw_rx_bd *first_buf = &tpa_info->first_buf;
1268                 u8 *data = first_buf->data;
1269
1270                 if (data == NULL) {
1271                         DP(NETIF_MSG_IFDOWN, "tpa bin %d empty on free\n", i);
1272                         continue;
1273                 }
1274                 if (tpa_info->tpa_state == BNX2X_TPA_START)
1275                         dma_unmap_single(&bp->pdev->dev,
1276                                          dma_unmap_addr(first_buf, mapping),
1277                                          fp->rx_buf_size, DMA_FROM_DEVICE);
1278                 bnx2x_frag_free(fp, data);
1279                 first_buf->data = NULL;
1280         }
1281 }
1282
1283 void bnx2x_init_rx_rings_cnic(struct bnx2x *bp)
1284 {
1285         int j;
1286
1287         for_each_rx_queue_cnic(bp, j) {
1288                 struct bnx2x_fastpath *fp = &bp->fp[j];
1289
1290                 fp->rx_bd_cons = 0;
1291
1292                 /* Activate BD ring */
1293                 /* Warning!
1294                  * this will generate an interrupt (to the TSTORM)
1295                  * must only be done after chip is initialized
1296                  */
1297                 bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
1298                                      fp->rx_sge_prod);
1299         }
1300 }
1301
1302 void bnx2x_init_rx_rings(struct bnx2x *bp)
1303 {
1304         int func = BP_FUNC(bp);
1305         u16 ring_prod;
1306         int i, j;
1307
1308         /* Allocate TPA resources */
1309         for_each_eth_queue(bp, j) {
1310                 struct bnx2x_fastpath *fp = &bp->fp[j];
1311
1312                 DP(NETIF_MSG_IFUP,
1313                    "mtu %d  rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size);
1314
1315                 if (!fp->disable_tpa) {
1316                         /* Fill the per-aggregation pool */
1317                         for (i = 0; i < MAX_AGG_QS(bp); i++) {
1318                                 struct bnx2x_agg_info *tpa_info =
1319                                         &fp->tpa_info[i];
1320                                 struct sw_rx_bd *first_buf =
1321                                         &tpa_info->first_buf;
1322
1323                                 first_buf->data =
1324                                         bnx2x_frag_alloc(fp, GFP_KERNEL);
1325                                 if (!first_buf->data) {
1326                                         BNX2X_ERR("Failed to allocate TPA skb pool for queue[%d] - disabling TPA on this queue!\n",
1327                                                   j);
1328                                         bnx2x_free_tpa_pool(bp, fp, i);
1329                                         fp->disable_tpa = 1;
1330                                         break;
1331                                 }
1332                                 dma_unmap_addr_set(first_buf, mapping, 0);
1333                                 tpa_info->tpa_state = BNX2X_TPA_STOP;
1334                         }
1335
1336                         /* "next page" elements initialization */
1337                         bnx2x_set_next_page_sgl(fp);
1338
1339                         /* set SGEs bit mask */
1340                         bnx2x_init_sge_ring_bit_mask(fp);
1341
1342                         /* Allocate SGEs and initialize the ring elements */
1343                         for (i = 0, ring_prod = 0;
1344                              i < MAX_RX_SGE_CNT*NUM_RX_SGE_PAGES; i++) {
1345
1346                                 if (bnx2x_alloc_rx_sge(bp, fp, ring_prod,
1347                                                        GFP_KERNEL) < 0) {
1348                                         BNX2X_ERR("was only able to allocate %d rx sges\n",
1349                                                   i);
1350                                         BNX2X_ERR("disabling TPA for queue[%d]\n",
1351                                                   j);
1352                                         /* Cleanup already allocated elements */
1353                                         bnx2x_free_rx_sge_range(bp, fp,
1354                                                                 ring_prod);
1355                                         bnx2x_free_tpa_pool(bp, fp,
1356                                                             MAX_AGG_QS(bp));
1357                                         fp->disable_tpa = 1;
1358                                         ring_prod = 0;
1359                                         break;
1360                                 }
1361                                 ring_prod = NEXT_SGE_IDX(ring_prod);
1362                         }
1363
1364                         fp->rx_sge_prod = ring_prod;
1365                 }
1366         }
1367
1368         for_each_eth_queue(bp, j) {
1369                 struct bnx2x_fastpath *fp = &bp->fp[j];
1370
1371                 fp->rx_bd_cons = 0;
1372
1373                 /* Activate BD ring */
1374                 /* Warning!
1375                  * this will generate an interrupt (to the TSTORM)
1376                  * must only be done after chip is initialized
1377                  */
1378                 bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
1379                                      fp->rx_sge_prod);
1380
1381                 if (j != 0)
1382                         continue;
1383
1384                 if (CHIP_IS_E1(bp)) {
1385                         REG_WR(bp, BAR_USTRORM_INTMEM +
1386                                USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func),
1387                                U64_LO(fp->rx_comp_mapping));
1388                         REG_WR(bp, BAR_USTRORM_INTMEM +
1389                                USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func) + 4,
1390                                U64_HI(fp->rx_comp_mapping));
1391                 }
1392         }
1393 }
1394
1395 static void bnx2x_free_tx_skbs_queue(struct bnx2x_fastpath *fp)
1396 {
1397         u8 cos;
1398         struct bnx2x *bp = fp->bp;
1399
1400         for_each_cos_in_tx_queue(fp, cos) {
1401                 struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos];
1402                 unsigned pkts_compl = 0, bytes_compl = 0;
1403
1404                 u16 sw_prod = txdata->tx_pkt_prod;
1405                 u16 sw_cons = txdata->tx_pkt_cons;
1406
1407                 while (sw_cons != sw_prod) {
1408                         bnx2x_free_tx_pkt(bp, txdata, TX_BD(sw_cons),
1409                                           &pkts_compl, &bytes_compl);
1410                         sw_cons++;
1411                 }
1412
1413                 netdev_tx_reset_queue(
1414                         netdev_get_tx_queue(bp->dev,
1415                                             txdata->txq_index));
1416         }
1417 }
1418
1419 static void bnx2x_free_tx_skbs_cnic(struct bnx2x *bp)
1420 {
1421         int i;
1422
1423         for_each_tx_queue_cnic(bp, i) {
1424                 bnx2x_free_tx_skbs_queue(&bp->fp[i]);
1425         }
1426 }
1427
1428 static void bnx2x_free_tx_skbs(struct bnx2x *bp)
1429 {
1430         int i;
1431
1432         for_each_eth_queue(bp, i) {
1433                 bnx2x_free_tx_skbs_queue(&bp->fp[i]);
1434         }
1435 }
1436
1437 static void bnx2x_free_rx_bds(struct bnx2x_fastpath *fp)
1438 {
1439         struct bnx2x *bp = fp->bp;
1440         int i;
1441
1442         /* ring wasn't allocated */
1443         if (fp->rx_buf_ring == NULL)
1444                 return;
1445
1446         for (i = 0; i < NUM_RX_BD; i++) {
1447                 struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i];
1448                 u8 *data = rx_buf->data;
1449
1450                 if (data == NULL)
1451                         continue;
1452                 dma_unmap_single(&bp->pdev->dev,
1453                                  dma_unmap_addr(rx_buf, mapping),
1454                                  fp->rx_buf_size, DMA_FROM_DEVICE);
1455
1456                 rx_buf->data = NULL;
1457                 bnx2x_frag_free(fp, data);
1458         }
1459 }
1460
1461 static void bnx2x_free_rx_skbs_cnic(struct bnx2x *bp)
1462 {
1463         int j;
1464
1465         for_each_rx_queue_cnic(bp, j) {
1466                 bnx2x_free_rx_bds(&bp->fp[j]);
1467         }
1468 }
1469
1470 static void bnx2x_free_rx_skbs(struct bnx2x *bp)
1471 {
1472         int j;
1473
1474         for_each_eth_queue(bp, j) {
1475                 struct bnx2x_fastpath *fp = &bp->fp[j];
1476
1477                 bnx2x_free_rx_bds(fp);
1478
1479                 if (!fp->disable_tpa)
1480                         bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp));
1481         }
1482 }
1483
1484 void bnx2x_free_skbs_cnic(struct bnx2x *bp)
1485 {
1486         bnx2x_free_tx_skbs_cnic(bp);
1487         bnx2x_free_rx_skbs_cnic(bp);
1488 }
1489
1490 void bnx2x_free_skbs(struct bnx2x *bp)
1491 {
1492         bnx2x_free_tx_skbs(bp);
1493         bnx2x_free_rx_skbs(bp);
1494 }
1495
1496 void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value)
1497 {
1498         /* load old values */
1499         u32 mf_cfg = bp->mf_config[BP_VN(bp)];
1500
1501         if (value != bnx2x_extract_max_cfg(bp, mf_cfg)) {
1502                 /* leave all but MAX value */
1503                 mf_cfg &= ~FUNC_MF_CFG_MAX_BW_MASK;
1504
1505                 /* set new MAX value */
1506                 mf_cfg |= (value << FUNC_MF_CFG_MAX_BW_SHIFT)
1507                                 & FUNC_MF_CFG_MAX_BW_MASK;
1508
1509                 bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, mf_cfg);
1510         }
1511 }
1512
1513 /**
1514  * bnx2x_free_msix_irqs - free previously requested MSI-X IRQ vectors
1515  *
1516  * @bp:         driver handle
1517  * @nvecs:      number of vectors to be released
1518  */
1519 static void bnx2x_free_msix_irqs(struct bnx2x *bp, int nvecs)
1520 {
1521         int i, offset = 0;
1522
1523         if (nvecs == offset)
1524                 return;
1525
1526         /* VFs don't have a default SB */
1527         if (IS_PF(bp)) {
1528                 free_irq(bp->msix_table[offset].vector, bp->dev);
1529                 DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
1530                    bp->msix_table[offset].vector);
1531                 offset++;
1532         }
1533
1534         if (CNIC_SUPPORT(bp)) {
1535                 if (nvecs == offset)
1536                         return;
1537                 offset++;
1538         }
1539
1540         for_each_eth_queue(bp, i) {
1541                 if (nvecs == offset)
1542                         return;
1543                 DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq\n",
1544                    i, bp->msix_table[offset].vector);
1545
1546                 free_irq(bp->msix_table[offset++].vector, &bp->fp[i]);
1547         }
1548 }
1549
1550 void bnx2x_free_irq(struct bnx2x *bp)
1551 {
1552         if (bp->flags & USING_MSIX_FLAG &&
1553             !(bp->flags & USING_SINGLE_MSIX_FLAG)) {
1554                 int nvecs = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_SUPPORT(bp);
1555
1556                 /* vfs don't have a default status block */
1557                 if (IS_PF(bp))
1558                         nvecs++;
1559
1560                 bnx2x_free_msix_irqs(bp, nvecs);
1561         } else {
1562                 free_irq(bp->dev->irq, bp->dev);
1563         }
1564 }
1565
1566 int bnx2x_enable_msix(struct bnx2x *bp)
1567 {
1568         int msix_vec = 0, i, rc;
1569
1570         /* VFs don't have a default status block */
1571         if (IS_PF(bp)) {
1572                 bp->msix_table[msix_vec].entry = msix_vec;
1573                 BNX2X_DEV_INFO("msix_table[0].entry = %d (slowpath)\n",
1574                                bp->msix_table[0].entry);
1575                 msix_vec++;
1576         }
1577
1578         /* Cnic requires an msix vector for itself */
1579         if (CNIC_SUPPORT(bp)) {
1580                 bp->msix_table[msix_vec].entry = msix_vec;
1581                 BNX2X_DEV_INFO("msix_table[%d].entry = %d (CNIC)\n",
1582                                msix_vec, bp->msix_table[msix_vec].entry);
1583                 msix_vec++;
1584         }
1585
1586         /* We need separate vectors for ETH queues only (not FCoE) */
1587         for_each_eth_queue(bp, i) {
1588                 bp->msix_table[msix_vec].entry = msix_vec;
1589                 BNX2X_DEV_INFO("msix_table[%d].entry = %d (fastpath #%u)\n",
1590                                msix_vec, msix_vec, i);
1591                 msix_vec++;
1592         }
1593
1594         DP(BNX2X_MSG_SP, "about to request enable msix with %d vectors\n",
1595            msix_vec);
1596
1597         rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], msix_vec);
1598
1599         /*
1600          * reconfigure number of tx/rx queues according to available
1601          * MSI-X vectors
1602          */
1603         if (rc >= BNX2X_MIN_MSIX_VEC_CNT(bp)) {
1604                 /* how less vectors we will have? */
1605                 int diff = msix_vec - rc;
1606
1607                 BNX2X_DEV_INFO("Trying to use less MSI-X vectors: %d\n", rc);
1608
1609                 rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], rc);
1610
1611                 if (rc) {
1612                         BNX2X_DEV_INFO("MSI-X is not attainable rc %d\n", rc);
1613                         goto no_msix;
1614                 }
1615                 /*
1616                  * decrease number of queues by number of unallocated entries
1617                  */
1618                 bp->num_ethernet_queues -= diff;
1619                 bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
1620
1621                 BNX2X_DEV_INFO("New queue configuration set: %d\n",
1622                                bp->num_queues);
1623         } else if (rc > 0) {
1624                 /* Get by with single vector */
1625                 rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], 1);
1626                 if (rc) {
1627                         BNX2X_DEV_INFO("Single MSI-X is not attainable rc %d\n",
1628                                        rc);
1629                         goto no_msix;
1630                 }
1631
1632                 BNX2X_DEV_INFO("Using single MSI-X vector\n");
1633                 bp->flags |= USING_SINGLE_MSIX_FLAG;
1634
1635                 BNX2X_DEV_INFO("set number of queues to 1\n");
1636                 bp->num_ethernet_queues = 1;
1637                 bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
1638         } else if (rc < 0) {
1639                 BNX2X_DEV_INFO("MSI-X is not attainable  rc %d\n", rc);
1640                 goto no_msix;
1641         }
1642
1643         bp->flags |= USING_MSIX_FLAG;
1644
1645         return 0;
1646
1647 no_msix:
1648         /* fall to INTx if not enough memory */
1649         if (rc == -ENOMEM)
1650                 bp->flags |= DISABLE_MSI_FLAG;
1651
1652         return rc;
1653 }
1654
1655 static int bnx2x_req_msix_irqs(struct bnx2x *bp)
1656 {
1657         int i, rc, offset = 0;
1658
1659         /* no default status block for vf */
1660         if (IS_PF(bp)) {
1661                 rc = request_irq(bp->msix_table[offset++].vector,
1662                                  bnx2x_msix_sp_int, 0,
1663                                  bp->dev->name, bp->dev);
1664                 if (rc) {
1665                         BNX2X_ERR("request sp irq failed\n");
1666                         return -EBUSY;
1667                 }
1668         }
1669
1670         if (CNIC_SUPPORT(bp))
1671                 offset++;
1672
1673         for_each_eth_queue(bp, i) {
1674                 struct bnx2x_fastpath *fp = &bp->fp[i];
1675                 snprintf(fp->name, sizeof(fp->name), "%s-fp-%d",
1676                          bp->dev->name, i);
1677
1678                 rc = request_irq(bp->msix_table[offset].vector,
1679                                  bnx2x_msix_fp_int, 0, fp->name, fp);
1680                 if (rc) {
1681                         BNX2X_ERR("request fp #%d irq (%d) failed  rc %d\n", i,
1682                               bp->msix_table[offset].vector, rc);
1683                         bnx2x_free_msix_irqs(bp, offset);
1684                         return -EBUSY;
1685                 }
1686
1687                 offset++;
1688         }
1689
1690         i = BNX2X_NUM_ETH_QUEUES(bp);
1691         if (IS_PF(bp)) {
1692                 offset = 1 + CNIC_SUPPORT(bp);
1693                 netdev_info(bp->dev,
1694                             "using MSI-X  IRQs: sp %d  fp[%d] %d ... fp[%d] %d\n",
1695                             bp->msix_table[0].vector,
1696                             0, bp->msix_table[offset].vector,
1697                             i - 1, bp->msix_table[offset + i - 1].vector);
1698         } else {
1699                 offset = CNIC_SUPPORT(bp);
1700                 netdev_info(bp->dev,
1701                             "using MSI-X  IRQs: fp[%d] %d ... fp[%d] %d\n",
1702                             0, bp->msix_table[offset].vector,
1703                             i - 1, bp->msix_table[offset + i - 1].vector);
1704         }
1705         return 0;
1706 }
1707
1708 int bnx2x_enable_msi(struct bnx2x *bp)
1709 {
1710         int rc;
1711
1712         rc = pci_enable_msi(bp->pdev);
1713         if (rc) {
1714                 BNX2X_DEV_INFO("MSI is not attainable\n");
1715                 return -1;
1716         }
1717         bp->flags |= USING_MSI_FLAG;
1718
1719         return 0;
1720 }
1721
1722 static int bnx2x_req_irq(struct bnx2x *bp)
1723 {
1724         unsigned long flags;
1725         unsigned int irq;
1726
1727         if (bp->flags & (USING_MSI_FLAG | USING_MSIX_FLAG))
1728                 flags = 0;
1729         else
1730                 flags = IRQF_SHARED;
1731
1732         if (bp->flags & USING_MSIX_FLAG)
1733                 irq = bp->msix_table[0].vector;
1734         else
1735                 irq = bp->pdev->irq;
1736
1737         return request_irq(irq, bnx2x_interrupt, flags, bp->dev->name, bp->dev);
1738 }
1739
1740 static int bnx2x_setup_irqs(struct bnx2x *bp)
1741 {
1742         int rc = 0;
1743         if (bp->flags & USING_MSIX_FLAG &&
1744             !(bp->flags & USING_SINGLE_MSIX_FLAG)) {
1745                 rc = bnx2x_req_msix_irqs(bp);
1746                 if (rc)
1747                         return rc;
1748         } else {
1749                 rc = bnx2x_req_irq(bp);
1750                 if (rc) {
1751                         BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);
1752                         return rc;
1753                 }
1754                 if (bp->flags & USING_MSI_FLAG) {
1755                         bp->dev->irq = bp->pdev->irq;
1756                         netdev_info(bp->dev, "using MSI IRQ %d\n",
1757                                     bp->dev->irq);
1758                 }
1759                 if (bp->flags & USING_MSIX_FLAG) {
1760                         bp->dev->irq = bp->msix_table[0].vector;
1761                         netdev_info(bp->dev, "using MSIX IRQ %d\n",
1762                                     bp->dev->irq);
1763                 }
1764         }
1765
1766         return 0;
1767 }
1768
1769 static void bnx2x_napi_enable_cnic(struct bnx2x *bp)
1770 {
1771         int i;
1772
1773         for_each_rx_queue_cnic(bp, i) {
1774                 bnx2x_fp_init_lock(&bp->fp[i]);
1775                 napi_enable(&bnx2x_fp(bp, i, napi));
1776         }
1777 }
1778
1779 static void bnx2x_napi_enable(struct bnx2x *bp)
1780 {
1781         int i;
1782
1783         for_each_eth_queue(bp, i) {
1784                 bnx2x_fp_init_lock(&bp->fp[i]);
1785                 napi_enable(&bnx2x_fp(bp, i, napi));
1786         }
1787 }
1788
1789 static void bnx2x_napi_disable_cnic(struct bnx2x *bp)
1790 {
1791         int i;
1792
1793         local_bh_disable();
1794         for_each_rx_queue_cnic(bp, i) {
1795                 napi_disable(&bnx2x_fp(bp, i, napi));
1796                 while (!bnx2x_fp_lock_napi(&bp->fp[i]))
1797                         mdelay(1);
1798         }
1799         local_bh_enable();
1800 }
1801
1802 static void bnx2x_napi_disable(struct bnx2x *bp)
1803 {
1804         int i;
1805
1806         local_bh_disable();
1807         for_each_eth_queue(bp, i) {
1808                 napi_disable(&bnx2x_fp(bp, i, napi));
1809                 while (!bnx2x_fp_lock_napi(&bp->fp[i]))
1810                         mdelay(1);
1811         }
1812         local_bh_enable();
1813 }
1814
1815 void bnx2x_netif_start(struct bnx2x *bp)
1816 {
1817         if (netif_running(bp->dev)) {
1818                 bnx2x_napi_enable(bp);
1819                 if (CNIC_LOADED(bp))
1820                         bnx2x_napi_enable_cnic(bp);
1821                 bnx2x_int_enable(bp);
1822                 if (bp->state == BNX2X_STATE_OPEN)
1823                         netif_tx_wake_all_queues(bp->dev);
1824         }
1825 }
1826
1827 void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
1828 {
1829         bnx2x_int_disable_sync(bp, disable_hw);
1830         bnx2x_napi_disable(bp);
1831         if (CNIC_LOADED(bp))
1832                 bnx2x_napi_disable_cnic(bp);
1833 }
1834
1835 u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
1836 {
1837         struct bnx2x *bp = netdev_priv(dev);
1838
1839         if (CNIC_LOADED(bp) && !NO_FCOE(bp)) {
1840                 struct ethhdr *hdr = (struct ethhdr *)skb->data;
1841                 u16 ether_type = ntohs(hdr->h_proto);
1842
1843                 /* Skip VLAN tag if present */
1844                 if (ether_type == ETH_P_8021Q) {
1845                         struct vlan_ethhdr *vhdr =
1846                                 (struct vlan_ethhdr *)skb->data;
1847
1848                         ether_type = ntohs(vhdr->h_vlan_encapsulated_proto);
1849                 }
1850
1851                 /* If ethertype is FCoE or FIP - use FCoE ring */
1852                 if ((ether_type == ETH_P_FCOE) || (ether_type == ETH_P_FIP))
1853                         return bnx2x_fcoe_tx(bp, txq_index);
1854         }
1855
1856         /* select a non-FCoE queue */
1857         return __netdev_pick_tx(dev, skb) % BNX2X_NUM_ETH_QUEUES(bp);
1858 }
1859
1860 void bnx2x_set_num_queues(struct bnx2x *bp)
1861 {
1862         /* RSS queues */
1863         bp->num_ethernet_queues = bnx2x_calc_num_queues(bp);
1864
1865         /* override in STORAGE SD modes */
1866         if (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp))
1867                 bp->num_ethernet_queues = 1;
1868
1869         /* Add special queues */
1870         bp->num_cnic_queues = CNIC_SUPPORT(bp); /* For FCOE */
1871         bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
1872
1873         BNX2X_DEV_INFO("set number of queues to %d\n", bp->num_queues);
1874 }
1875
1876 /**
1877  * bnx2x_set_real_num_queues - configure netdev->real_num_[tx,rx]_queues
1878  *
1879  * @bp:         Driver handle
1880  *
1881  * We currently support for at most 16 Tx queues for each CoS thus we will
1882  * allocate a multiple of 16 for ETH L2 rings according to the value of the
1883  * bp->max_cos.
1884  *
1885  * If there is an FCoE L2 queue the appropriate Tx queue will have the next
1886  * index after all ETH L2 indices.
1887  *
1888  * If the actual number of Tx queues (for each CoS) is less than 16 then there
1889  * will be the holes at the end of each group of 16 ETh L2 indices (0..15,
1890  * 16..31,...) with indices that are not coupled with any real Tx queue.
1891  *
1892  * The proper configuration of skb->queue_mapping is handled by
1893  * bnx2x_select_queue() and __skb_tx_hash().
1894  *
1895  * bnx2x_setup_tc() takes care of the proper TC mappings so that __skb_tx_hash()
1896  * will return a proper Tx index if TC is enabled (netdev->num_tc > 0).
1897  */
1898 static int bnx2x_set_real_num_queues(struct bnx2x *bp, int include_cnic)
1899 {
1900         int rc, tx, rx;
1901
1902         tx = BNX2X_NUM_ETH_QUEUES(bp) * bp->max_cos;
1903         rx = BNX2X_NUM_ETH_QUEUES(bp);
1904
1905 /* account for fcoe queue */
1906         if (include_cnic && !NO_FCOE(bp)) {
1907                 rx++;
1908                 tx++;
1909         }
1910
1911         rc = netif_set_real_num_tx_queues(bp->dev, tx);
1912         if (rc) {
1913                 BNX2X_ERR("Failed to set real number of Tx queues: %d\n", rc);
1914                 return rc;
1915         }
1916         rc = netif_set_real_num_rx_queues(bp->dev, rx);
1917         if (rc) {
1918                 BNX2X_ERR("Failed to set real number of Rx queues: %d\n", rc);
1919                 return rc;
1920         }
1921
1922         DP(NETIF_MSG_IFUP, "Setting real num queues to (tx, rx) (%d, %d)\n",
1923                           tx, rx);
1924
1925         return rc;
1926 }
1927
1928 static void bnx2x_set_rx_buf_size(struct bnx2x *bp)
1929 {
1930         int i;
1931
1932         for_each_queue(bp, i) {
1933                 struct bnx2x_fastpath *fp = &bp->fp[i];
1934                 u32 mtu;
1935
1936                 /* Always use a mini-jumbo MTU for the FCoE L2 ring */
1937                 if (IS_FCOE_IDX(i))
1938                         /*
1939                          * Although there are no IP frames expected to arrive to
1940                          * this ring we still want to add an
1941                          * IP_HEADER_ALIGNMENT_PADDING to prevent a buffer
1942                          * overrun attack.
1943                          */
1944                         mtu = BNX2X_FCOE_MINI_JUMBO_MTU;
1945                 else
1946                         mtu = bp->dev->mtu;
1947                 fp->rx_buf_size = BNX2X_FW_RX_ALIGN_START +
1948                                   IP_HEADER_ALIGNMENT_PADDING +
1949                                   ETH_OVREHEAD +
1950                                   mtu +
1951                                   BNX2X_FW_RX_ALIGN_END;
1952                 /* Note : rx_buf_size doesn't take into account NET_SKB_PAD */
1953                 if (fp->rx_buf_size + NET_SKB_PAD <= PAGE_SIZE)
1954                         fp->rx_frag_size = fp->rx_buf_size + NET_SKB_PAD;
1955                 else
1956                         fp->rx_frag_size = 0;
1957         }
1958 }
1959
1960 static int bnx2x_init_rss(struct bnx2x *bp)
1961 {
1962         int i;
1963         u8 num_eth_queues = BNX2X_NUM_ETH_QUEUES(bp);
1964
1965         /* Prepare the initial contents for the indirection table if RSS is
1966          * enabled
1967          */
1968         for (i = 0; i < sizeof(bp->rss_conf_obj.ind_table); i++)
1969                 bp->rss_conf_obj.ind_table[i] =
1970                         bp->fp->cl_id +
1971                         ethtool_rxfh_indir_default(i, num_eth_queues);
1972
1973         /*
1974          * For 57710 and 57711 SEARCHER configuration (rss_keys) is
1975          * per-port, so if explicit configuration is needed , do it only
1976          * for a PMF.
1977          *
1978          * For 57712 and newer on the other hand it's a per-function
1979          * configuration.
1980          */
1981         return bnx2x_config_rss_eth(bp, bp->port.pmf || !CHIP_IS_E1x(bp));
1982 }
1983
1984 int bnx2x_rss(struct bnx2x *bp, struct bnx2x_rss_config_obj *rss_obj,
1985               bool config_hash, bool enable)
1986 {
1987         struct bnx2x_config_rss_params params = {NULL};
1988
1989         /* Although RSS is meaningless when there is a single HW queue we
1990          * still need it enabled in order to have HW Rx hash generated.
1991          *
1992          * if (!is_eth_multi(bp))
1993          *      bp->multi_mode = ETH_RSS_MODE_DISABLED;
1994          */
1995
1996         params.rss_obj = rss_obj;
1997
1998         __set_bit(RAMROD_COMP_WAIT, &params.ramrod_flags);
1999
2000         if (enable) {
2001                 __set_bit(BNX2X_RSS_MODE_REGULAR, &params.rss_flags);
2002
2003                 /* RSS configuration */
2004                 __set_bit(BNX2X_RSS_IPV4, &params.rss_flags);
2005                 __set_bit(BNX2X_RSS_IPV4_TCP, &params.rss_flags);
2006                 __set_bit(BNX2X_RSS_IPV6, &params.rss_flags);
2007                 __set_bit(BNX2X_RSS_IPV6_TCP, &params.rss_flags);
2008                 if (rss_obj->udp_rss_v4)
2009                         __set_bit(BNX2X_RSS_IPV4_UDP, &params.rss_flags);
2010                 if (rss_obj->udp_rss_v6)
2011                         __set_bit(BNX2X_RSS_IPV6_UDP, &params.rss_flags);
2012         } else {
2013                 __set_bit(BNX2X_RSS_MODE_DISABLED, &params.rss_flags);
2014         }
2015
2016         /* Hash bits */
2017         params.rss_result_mask = MULTI_MASK;
2018
2019         memcpy(params.ind_table, rss_obj->ind_table, sizeof(params.ind_table));
2020
2021         if (config_hash) {
2022                 /* RSS keys */
2023                 prandom_bytes(params.rss_key, T_ETH_RSS_KEY * 4);
2024                 __set_bit(BNX2X_RSS_SET_SRCH, &params.rss_flags);
2025         }
2026
2027         if (IS_PF(bp))
2028                 return bnx2x_config_rss(bp, &params);
2029         else
2030                 return bnx2x_vfpf_config_rss(bp, &params);
2031 }
2032
2033 static int bnx2x_init_hw(struct bnx2x *bp, u32 load_code)
2034 {
2035         struct bnx2x_func_state_params func_params = {NULL};
2036
2037         /* Prepare parameters for function state transitions */
2038         __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
2039
2040         func_params.f_obj = &bp->func_obj;
2041         func_params.cmd = BNX2X_F_CMD_HW_INIT;
2042
2043         func_params.params.hw_init.load_phase = load_code;
2044
2045         return bnx2x_func_state_change(bp, &func_params);
2046 }
2047
2048 /*
2049  * Cleans the object that have internal lists without sending
2050  * ramrods. Should be run when interrupts are disabled.
2051  */
2052 void bnx2x_squeeze_objects(struct bnx2x *bp)
2053 {
2054         int rc;
2055         unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
2056         struct bnx2x_mcast_ramrod_params rparam = {NULL};
2057         struct bnx2x_vlan_mac_obj *mac_obj = &bp->sp_objs->mac_obj;
2058
2059         /***************** Cleanup MACs' object first *************************/
2060
2061         /* Wait for completion of requested */
2062         __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
2063         /* Perform a dry cleanup */
2064         __set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
2065
2066         /* Clean ETH primary MAC */
2067         __set_bit(BNX2X_ETH_MAC, &vlan_mac_flags);
2068         rc = mac_obj->delete_all(bp, &bp->sp_objs->mac_obj, &vlan_mac_flags,
2069                                  &ramrod_flags);
2070         if (rc != 0)
2071                 BNX2X_ERR("Failed to clean ETH MACs: %d\n", rc);
2072
2073         /* Cleanup UC list */
2074         vlan_mac_flags = 0;
2075         __set_bit(BNX2X_UC_LIST_MAC, &vlan_mac_flags);
2076         rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags,
2077                                  &ramrod_flags);
2078         if (rc != 0)
2079                 BNX2X_ERR("Failed to clean UC list MACs: %d\n", rc);
2080
2081         /***************** Now clean mcast object *****************************/
2082         rparam.mcast_obj = &bp->mcast_obj;
2083         __set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
2084
2085         /* Add a DEL command... - Since we're doing a driver cleanup only,
2086          * we take a lock surrounding both the initial send and the CONTs,
2087          * as we don't want a true completion to disrupt us in the middle.
2088          */
2089         netif_addr_lock_bh(bp->dev);
2090         rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
2091         if (rc < 0)
2092                 BNX2X_ERR("Failed to add a new DEL command to a multi-cast object: %d\n",
2093                           rc);
2094
2095         /* ...and wait until all pending commands are cleared */
2096         rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
2097         while (rc != 0) {
2098                 if (rc < 0) {
2099                         BNX2X_ERR("Failed to clean multi-cast object: %d\n",
2100                                   rc);
2101                         netif_addr_unlock_bh(bp->dev);
2102                         return;
2103                 }
2104
2105                 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
2106         }
2107         netif_addr_unlock_bh(bp->dev);
2108 }
2109
2110 #ifndef BNX2X_STOP_ON_ERROR
2111 #define LOAD_ERROR_EXIT(bp, label) \
2112         do { \
2113                 (bp)->state = BNX2X_STATE_ERROR; \
2114                 goto label; \
2115         } while (0)
2116
2117 #define LOAD_ERROR_EXIT_CNIC(bp, label) \
2118         do { \
2119                 bp->cnic_loaded = false; \
2120                 goto label; \
2121         } while (0)
2122 #else /*BNX2X_STOP_ON_ERROR*/
2123 #define LOAD_ERROR_EXIT(bp, label) \
2124         do { \
2125                 (bp)->state = BNX2X_STATE_ERROR; \
2126                 (bp)->panic = 1; \
2127                 return -EBUSY; \
2128         } while (0)
2129 #define LOAD_ERROR_EXIT_CNIC(bp, label) \
2130         do { \
2131                 bp->cnic_loaded = false; \
2132                 (bp)->panic = 1; \
2133                 return -EBUSY; \
2134         } while (0)
2135 #endif /*BNX2X_STOP_ON_ERROR*/
2136
2137 static void bnx2x_free_fw_stats_mem(struct bnx2x *bp)
2138 {
2139         BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping,
2140                        bp->fw_stats_data_sz + bp->fw_stats_req_sz);
2141         return;
2142 }
2143
2144 static int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp)
2145 {
2146         int num_groups, vf_headroom = 0;
2147         int is_fcoe_stats = NO_FCOE(bp) ? 0 : 1;
2148
2149         /* number of queues for statistics is number of eth queues + FCoE */
2150         u8 num_queue_stats = BNX2X_NUM_ETH_QUEUES(bp) + is_fcoe_stats;
2151
2152         /* Total number of FW statistics requests =
2153          * 1 for port stats + 1 for PF stats + potential 2 for FCoE (fcoe proper
2154          * and fcoe l2 queue) stats + num of queues (which includes another 1
2155          * for fcoe l2 queue if applicable)
2156          */
2157         bp->fw_stats_num = 2 + is_fcoe_stats + num_queue_stats;
2158
2159         /* vf stats appear in the request list, but their data is allocated by
2160          * the VFs themselves. We don't include them in the bp->fw_stats_num as
2161          * it is used to determine where to place the vf stats queries in the
2162          * request struct
2163          */
2164         if (IS_SRIOV(bp))
2165                 vf_headroom = bnx2x_vf_headroom(bp);
2166
2167         /* Request is built from stats_query_header and an array of
2168          * stats_query_cmd_group each of which contains
2169          * STATS_QUERY_CMD_COUNT rules. The real number or requests is
2170          * configured in the stats_query_header.
2171          */
2172         num_groups =
2173                 (((bp->fw_stats_num + vf_headroom) / STATS_QUERY_CMD_COUNT) +
2174                  (((bp->fw_stats_num + vf_headroom) % STATS_QUERY_CMD_COUNT) ?
2175                  1 : 0));
2176
2177         DP(BNX2X_MSG_SP, "stats fw_stats_num %d, vf headroom %d, num_groups %d\n",
2178            bp->fw_stats_num, vf_headroom, num_groups);
2179         bp->fw_stats_req_sz = sizeof(struct stats_query_header) +
2180                 num_groups * sizeof(struct stats_query_cmd_group);
2181
2182         /* Data for statistics requests + stats_counter
2183          * stats_counter holds per-STORM counters that are incremented
2184          * when STORM has finished with the current request.
2185          * memory for FCoE offloaded statistics are counted anyway,
2186          * even if they will not be sent.
2187          * VF stats are not accounted for here as the data of VF stats is stored
2188          * in memory allocated by the VF, not here.
2189          */
2190         bp->fw_stats_data_sz = sizeof(struct per_port_stats) +
2191                 sizeof(struct per_pf_stats) +
2192                 sizeof(struct fcoe_statistics_params) +
2193                 sizeof(struct per_queue_stats) * num_queue_stats +
2194                 sizeof(struct stats_counter);
2195
2196         BNX2X_PCI_ALLOC(bp->fw_stats, &bp->fw_stats_mapping,
2197                         bp->fw_stats_data_sz + bp->fw_stats_req_sz);
2198
2199         /* Set shortcuts */
2200         bp->fw_stats_req = (struct bnx2x_fw_stats_req *)bp->fw_stats;
2201         bp->fw_stats_req_mapping = bp->fw_stats_mapping;
2202         bp->fw_stats_data = (struct bnx2x_fw_stats_data *)
2203                 ((u8 *)bp->fw_stats + bp->fw_stats_req_sz);
2204         bp->fw_stats_data_mapping = bp->fw_stats_mapping +
2205                 bp->fw_stats_req_sz;
2206
2207         DP(BNX2X_MSG_SP, "statistics request base address set to %x %x\n",
2208            U64_HI(bp->fw_stats_req_mapping),
2209            U64_LO(bp->fw_stats_req_mapping));
2210         DP(BNX2X_MSG_SP, "statistics data base address set to %x %x\n",
2211            U64_HI(bp->fw_stats_data_mapping),
2212            U64_LO(bp->fw_stats_data_mapping));
2213         return 0;
2214
2215 alloc_mem_err:
2216         bnx2x_free_fw_stats_mem(bp);
2217         BNX2X_ERR("Can't allocate FW stats memory\n");
2218         return -ENOMEM;
2219 }
2220
2221 /* send load request to mcp and analyze response */
2222 static int bnx2x_nic_load_request(struct bnx2x *bp, u32 *load_code)
2223 {
2224         u32 param;
2225
2226         /* init fw_seq */
2227         bp->fw_seq =
2228                 (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
2229                  DRV_MSG_SEQ_NUMBER_MASK);
2230         BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
2231
2232         /* Get current FW pulse sequence */
2233         bp->fw_drv_pulse_wr_seq =
2234                 (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb) &
2235                  DRV_PULSE_SEQ_MASK);
2236         BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq);
2237
2238         param = DRV_MSG_CODE_LOAD_REQ_WITH_LFA;
2239
2240         if (IS_MF_SD(bp) && bnx2x_port_after_undi(bp))
2241                 param |= DRV_MSG_CODE_LOAD_REQ_FORCE_LFA;
2242
2243         /* load request */
2244         (*load_code) = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, param);
2245
2246         /* if mcp fails to respond we must abort */
2247         if (!(*load_code)) {
2248                 BNX2X_ERR("MCP response failure, aborting\n");
2249                 return -EBUSY;
2250         }
2251
2252         /* If mcp refused (e.g. other port is in diagnostic mode) we
2253          * must abort
2254          */
2255         if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) {
2256                 BNX2X_ERR("MCP refused load request, aborting\n");
2257                 return -EBUSY;
2258         }
2259         return 0;
2260 }
2261
2262 /* check whether another PF has already loaded FW to chip. In
2263  * virtualized environments a pf from another VM may have already
2264  * initialized the device including loading FW
2265  */
2266 int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code)
2267 {
2268         /* is another pf loaded on this engine? */
2269         if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP &&
2270             load_code != FW_MSG_CODE_DRV_LOAD_COMMON) {
2271                 /* build my FW version dword */
2272                 u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) +
2273                         (BCM_5710_FW_MINOR_VERSION << 8) +
2274                         (BCM_5710_FW_REVISION_VERSION << 16) +
2275                         (BCM_5710_FW_ENGINEERING_VERSION << 24);
2276
2277                 /* read loaded FW from chip */
2278                 u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
2279
2280                 DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x\n",
2281                    loaded_fw, my_fw);
2282
2283                 /* abort nic load if version mismatch */
2284                 if (my_fw != loaded_fw) {
2285                         BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. Aborting\n",
2286                                   loaded_fw, my_fw);
2287                         return -EBUSY;
2288                 }
2289         }
2290         return 0;
2291 }
2292
2293 /* returns the "mcp load_code" according to global load_count array */
2294 static int bnx2x_nic_load_no_mcp(struct bnx2x *bp, int port)
2295 {
2296         int path = BP_PATH(bp);
2297
2298         DP(NETIF_MSG_IFUP, "NO MCP - load counts[%d]      %d, %d, %d\n",
2299            path, load_count[path][0], load_count[path][1],
2300            load_count[path][2]);
2301         load_count[path][0]++;
2302         load_count[path][1 + port]++;
2303         DP(NETIF_MSG_IFUP, "NO MCP - new load counts[%d]  %d, %d, %d\n",
2304            path, load_count[path][0], load_count[path][1],
2305            load_count[path][2]);
2306         if (load_count[path][0] == 1)
2307                 return FW_MSG_CODE_DRV_LOAD_COMMON;
2308         else if (load_count[path][1 + port] == 1)
2309                 return FW_MSG_CODE_DRV_LOAD_PORT;
2310         else
2311                 return FW_MSG_CODE_DRV_LOAD_FUNCTION;
2312 }
2313
2314 /* mark PMF if applicable */
2315 static void bnx2x_nic_load_pmf(struct bnx2x *bp, u32 load_code)
2316 {
2317         if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
2318             (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
2319             (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
2320                 bp->port.pmf = 1;
2321                 /* We need the barrier to ensure the ordering between the
2322                  * writing to bp->port.pmf here and reading it from the
2323                  * bnx2x_periodic_task().
2324                  */
2325                 smp_mb();
2326         } else {
2327                 bp->port.pmf = 0;
2328         }
2329
2330         DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
2331 }
2332
2333 static void bnx2x_nic_load_afex_dcc(struct bnx2x *bp, int load_code)
2334 {
2335         if (((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
2336              (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP)) &&
2337             (bp->common.shmem2_base)) {
2338                 if (SHMEM2_HAS(bp, dcc_support))
2339                         SHMEM2_WR(bp, dcc_support,
2340                                   (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV |
2341                                    SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV));
2342                 if (SHMEM2_HAS(bp, afex_driver_support))
2343                         SHMEM2_WR(bp, afex_driver_support,
2344                                   SHMEM_AFEX_SUPPORTED_VERSION_ONE);
2345         }
2346
2347         /* Set AFEX default VLAN tag to an invalid value */
2348         bp->afex_def_vlan_tag = -1;
2349 }
2350
2351 /**
2352  * bnx2x_bz_fp - zero content of the fastpath structure.
2353  *
2354  * @bp:         driver handle
2355  * @index:      fastpath index to be zeroed
2356  *
2357  * Makes sure the contents of the bp->fp[index].napi is kept
2358  * intact.
2359  */
2360 static void bnx2x_bz_fp(struct bnx2x *bp, int index)
2361 {
2362         struct bnx2x_fastpath *fp = &bp->fp[index];
2363         int cos;
2364         struct napi_struct orig_napi = fp->napi;
2365         struct bnx2x_agg_info *orig_tpa_info = fp->tpa_info;
2366
2367         /* bzero bnx2x_fastpath contents */
2368         if (fp->tpa_info)
2369                 memset(fp->tpa_info, 0, ETH_MAX_AGGREGATION_QUEUES_E1H_E2 *
2370                        sizeof(struct bnx2x_agg_info));
2371         memset(fp, 0, sizeof(*fp));
2372
2373         /* Restore the NAPI object as it has been already initialized */
2374         fp->napi = orig_napi;
2375         fp->tpa_info = orig_tpa_info;
2376         fp->bp = bp;
2377         fp->index = index;
2378         if (IS_ETH_FP(fp))
2379                 fp->max_cos = bp->max_cos;
2380         else
2381                 /* Special queues support only one CoS */
2382                 fp->max_cos = 1;
2383
2384         /* Init txdata pointers */
2385         if (IS_FCOE_FP(fp))
2386                 fp->txdata_ptr[0] = &bp->bnx2x_txq[FCOE_TXQ_IDX(bp)];
2387         if (IS_ETH_FP(fp))
2388                 for_each_cos_in_tx_queue(fp, cos)
2389                         fp->txdata_ptr[cos] = &bp->bnx2x_txq[cos *
2390                                 BNX2X_NUM_ETH_QUEUES(bp) + index];
2391
2392         /* set the tpa flag for each queue. The tpa flag determines the queue
2393          * minimal size so it must be set prior to queue memory allocation
2394          */
2395         fp->disable_tpa = !(bp->flags & TPA_ENABLE_FLAG ||
2396                                   (bp->flags & GRO_ENABLE_FLAG &&
2397                                    bnx2x_mtu_allows_gro(bp->dev->mtu)));
2398         if (bp->flags & TPA_ENABLE_FLAG)
2399                 fp->mode = TPA_MODE_LRO;
2400         else if (bp->flags & GRO_ENABLE_FLAG)
2401                 fp->mode = TPA_MODE_GRO;
2402
2403         /* We don't want TPA on an FCoE L2 ring */
2404         if (IS_FCOE_FP(fp))
2405                 fp->disable_tpa = 1;
2406 }
2407
2408 int bnx2x_load_cnic(struct bnx2x *bp)
2409 {
2410         int i, rc, port = BP_PORT(bp);
2411
2412         DP(NETIF_MSG_IFUP, "Starting CNIC-related load\n");
2413
2414         mutex_init(&bp->cnic_mutex);
2415
2416         if (IS_PF(bp)) {
2417                 rc = bnx2x_alloc_mem_cnic(bp);
2418                 if (rc) {
2419                         BNX2X_ERR("Unable to allocate bp memory for cnic\n");
2420                         LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic0);
2421                 }
2422         }
2423
2424         rc = bnx2x_alloc_fp_mem_cnic(bp);
2425         if (rc) {
2426                 BNX2X_ERR("Unable to allocate memory for cnic fps\n");
2427                 LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic0);
2428         }
2429
2430         /* Update the number of queues with the cnic queues */
2431         rc = bnx2x_set_real_num_queues(bp, 1);
2432         if (rc) {
2433                 BNX2X_ERR("Unable to set real_num_queues including cnic\n");
2434                 LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic0);
2435         }
2436
2437         /* Add all CNIC NAPI objects */
2438         bnx2x_add_all_napi_cnic(bp);
2439         DP(NETIF_MSG_IFUP, "cnic napi added\n");
2440         bnx2x_napi_enable_cnic(bp);
2441
2442         rc = bnx2x_init_hw_func_cnic(bp);
2443         if (rc)
2444                 LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic1);
2445
2446         bnx2x_nic_init_cnic(bp);
2447
2448         if (IS_PF(bp)) {
2449                 /* Enable Timer scan */
2450                 REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 1);
2451
2452                 /* setup cnic queues */
2453                 for_each_cnic_queue(bp, i) {
2454                         rc = bnx2x_setup_queue(bp, &bp->fp[i], 0);
2455                         if (rc) {
2456                                 BNX2X_ERR("Queue setup failed\n");
2457                                 LOAD_ERROR_EXIT(bp, load_error_cnic2);
2458                         }
2459                 }
2460         }
2461
2462         /* Initialize Rx filter. */
2463         bnx2x_set_rx_mode_inner(bp);
2464
2465         /* re-read iscsi info */
2466         bnx2x_get_iscsi_info(bp);
2467         bnx2x_setup_cnic_irq_info(bp);
2468         bnx2x_setup_cnic_info(bp);
2469         bp->cnic_loaded = true;
2470         if (bp->state == BNX2X_STATE_OPEN)
2471                 bnx2x_cnic_notify(bp, CNIC_CTL_START_CMD);
2472
2473         DP(NETIF_MSG_IFUP, "Ending successfully CNIC-related load\n");
2474
2475         return 0;
2476
2477 #ifndef BNX2X_STOP_ON_ERROR
2478 load_error_cnic2:
2479         /* Disable Timer scan */
2480         REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
2481
2482 load_error_cnic1:
2483         bnx2x_napi_disable_cnic(bp);
2484         /* Update the number of queues without the cnic queues */
2485         if (bnx2x_set_real_num_queues(bp, 0))
2486                 BNX2X_ERR("Unable to set real_num_queues not including cnic\n");
2487 load_error_cnic0:
2488         BNX2X_ERR("CNIC-related load failed\n");
2489         bnx2x_free_fp_mem_cnic(bp);
2490         bnx2x_free_mem_cnic(bp);
2491         return rc;
2492 #endif /* ! BNX2X_STOP_ON_ERROR */
2493 }
2494
2495 /* must be called with rtnl_lock */
2496 int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
2497 {
2498         int port = BP_PORT(bp);
2499         int i, rc = 0, load_code = 0;
2500
2501         DP(NETIF_MSG_IFUP, "Starting NIC load\n");
2502         DP(NETIF_MSG_IFUP,
2503            "CNIC is %s\n", CNIC_ENABLED(bp) ? "enabled" : "disabled");
2504
2505 #ifdef BNX2X_STOP_ON_ERROR
2506         if (unlikely(bp->panic)) {
2507                 BNX2X_ERR("Can't load NIC when there is panic\n");
2508                 return -EPERM;
2509         }
2510 #endif
2511
2512         bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
2513
2514         /* zero the structure w/o any lock, before SP handler is initialized */
2515         memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link));
2516         __set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
2517                 &bp->last_reported_link.link_report_flags);
2518
2519         if (IS_PF(bp))
2520                 /* must be called before memory allocation and HW init */
2521                 bnx2x_ilt_set_info(bp);
2522
2523         /*
2524          * Zero fastpath structures preserving invariants like napi, which are
2525          * allocated only once, fp index, max_cos, bp pointer.
2526          * Also set fp->disable_tpa and txdata_ptr.
2527          */
2528         DP(NETIF_MSG_IFUP, "num queues: %d", bp->num_queues);
2529         for_each_queue(bp, i)
2530                 bnx2x_bz_fp(bp, i);
2531         memset(bp->bnx2x_txq, 0, (BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS +
2532                                   bp->num_cnic_queues) *
2533                                   sizeof(struct bnx2x_fp_txdata));
2534
2535         bp->fcoe_init = false;
2536
2537         /* Set the receive queues buffer size */
2538         bnx2x_set_rx_buf_size(bp);
2539
2540         if (IS_PF(bp)) {
2541                 rc = bnx2x_alloc_mem(bp);
2542                 if (rc) {
2543                         BNX2X_ERR("Unable to allocate bp memory\n");
2544                         return rc;
2545                 }
2546         }
2547
2548         /* Allocated memory for FW statistics  */
2549         if (bnx2x_alloc_fw_stats_mem(bp))
2550                 LOAD_ERROR_EXIT(bp, load_error0);
2551
2552         /* need to be done after alloc mem, since it's self adjusting to amount
2553          * of memory available for RSS queues
2554          */
2555         rc = bnx2x_alloc_fp_mem(bp);
2556         if (rc) {
2557                 BNX2X_ERR("Unable to allocate memory for fps\n");
2558                 LOAD_ERROR_EXIT(bp, load_error0);
2559         }
2560
2561         /* request pf to initialize status blocks */
2562         if (IS_VF(bp)) {
2563                 rc = bnx2x_vfpf_init(bp);
2564                 if (rc)
2565                         LOAD_ERROR_EXIT(bp, load_error0);
2566         }
2567
2568         /* As long as bnx2x_alloc_mem() may possibly update
2569          * bp->num_queues, bnx2x_set_real_num_queues() should always
2570          * come after it. At this stage cnic queues are not counted.
2571          */
2572         rc = bnx2x_set_real_num_queues(bp, 0);
2573         if (rc) {
2574                 BNX2X_ERR("Unable to set real_num_queues\n");
2575                 LOAD_ERROR_EXIT(bp, load_error0);
2576         }
2577
2578         /* configure multi cos mappings in kernel.
2579          * this configuration may be overridden by a multi class queue
2580          * discipline or by a dcbx negotiation result.
2581          */
2582         bnx2x_setup_tc(bp->dev, bp->max_cos);
2583
2584         /* Add all NAPI objects */
2585         bnx2x_add_all_napi(bp);
2586         DP(NETIF_MSG_IFUP, "napi added\n");
2587         bnx2x_napi_enable(bp);
2588
2589         if (IS_PF(bp)) {
2590                 /* set pf load just before approaching the MCP */
2591                 bnx2x_set_pf_load(bp);
2592
2593                 /* if mcp exists send load request and analyze response */
2594                 if (!BP_NOMCP(bp)) {
2595                         /* attempt to load pf */
2596                         rc = bnx2x_nic_load_request(bp, &load_code);
2597                         if (rc)
2598                                 LOAD_ERROR_EXIT(bp, load_error1);
2599
2600                         /* what did mcp say? */
2601                         rc = bnx2x_nic_load_analyze_req(bp, load_code);
2602                         if (rc) {
2603                                 bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
2604                                 LOAD_ERROR_EXIT(bp, load_error2);
2605                         }
2606                 } else {
2607                         load_code = bnx2x_nic_load_no_mcp(bp, port);
2608                 }
2609
2610                 /* mark pmf if applicable */
2611                 bnx2x_nic_load_pmf(bp, load_code);
2612
2613                 /* Init Function state controlling object */
2614                 bnx2x__init_func_obj(bp);
2615
2616                 /* Initialize HW */
2617                 rc = bnx2x_init_hw(bp, load_code);
2618                 if (rc) {
2619                         BNX2X_ERR("HW init failed, aborting\n");
2620                         bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
2621                         LOAD_ERROR_EXIT(bp, load_error2);
2622                 }
2623         }
2624
2625         bnx2x_pre_irq_nic_init(bp);
2626
2627         /* Connect to IRQs */
2628         rc = bnx2x_setup_irqs(bp);
2629         if (rc) {
2630                 BNX2X_ERR("setup irqs failed\n");
2631                 if (IS_PF(bp))
2632                         bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
2633                 LOAD_ERROR_EXIT(bp, load_error2);
2634         }
2635
2636         /* Init per-function objects */
2637         if (IS_PF(bp)) {
2638                 /* Setup NIC internals and enable interrupts */
2639                 bnx2x_post_irq_nic_init(bp, load_code);
2640
2641                 bnx2x_init_bp_objs(bp);
2642                 bnx2x_iov_nic_init(bp);
2643
2644                 /* Set AFEX default VLAN tag to an invalid value */
2645                 bp->afex_def_vlan_tag = -1;
2646                 bnx2x_nic_load_afex_dcc(bp, load_code);
2647                 bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
2648                 rc = bnx2x_func_start(bp);
2649                 if (rc) {
2650                         BNX2X_ERR("Function start failed!\n");
2651                         bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
2652
2653                         LOAD_ERROR_EXIT(bp, load_error3);
2654                 }
2655
2656                 /* Send LOAD_DONE command to MCP */
2657                 if (!BP_NOMCP(bp)) {
2658                         load_code = bnx2x_fw_command(bp,
2659                                                      DRV_MSG_CODE_LOAD_DONE, 0);
2660                         if (!load_code) {
2661                                 BNX2X_ERR("MCP response failure, aborting\n");
2662                                 rc = -EBUSY;
2663                                 LOAD_ERROR_EXIT(bp, load_error3);
2664                         }
2665                 }
2666
2667                 /* initialize FW coalescing state machines in RAM */
2668                 bnx2x_update_coalesce(bp);
2669         }
2670
2671         /* setup the leading queue */
2672         rc = bnx2x_setup_leading(bp);
2673         if (rc) {
2674                 BNX2X_ERR("Setup leading failed!\n");
2675                 LOAD_ERROR_EXIT(bp, load_error3);
2676         }
2677
2678         /* set up the rest of the queues */
2679         for_each_nondefault_eth_queue(bp, i) {
2680                 if (IS_PF(bp))
2681                         rc = bnx2x_setup_queue(bp, &bp->fp[i], false);
2682                 else /* VF */
2683                         rc = bnx2x_vfpf_setup_q(bp, &bp->fp[i], false);
2684                 if (rc) {
2685                         BNX2X_ERR("Queue %d setup failed\n", i);
2686                         LOAD_ERROR_EXIT(bp, load_error3);
2687                 }
2688         }
2689
2690         /* setup rss */
2691         rc = bnx2x_init_rss(bp);
2692         if (rc) {
2693                 BNX2X_ERR("PF RSS init failed\n");
2694                 LOAD_ERROR_EXIT(bp, load_error3);
2695         }
2696
2697         /* Now when Clients are configured we are ready to work */
2698         bp->state = BNX2X_STATE_OPEN;
2699
2700         /* Configure a ucast MAC */
2701         if (IS_PF(bp))
2702                 rc = bnx2x_set_eth_mac(bp, true);
2703         else /* vf */
2704                 rc = bnx2x_vfpf_config_mac(bp, bp->dev->dev_addr, bp->fp->index,
2705                                            true);
2706         if (rc) {
2707                 BNX2X_ERR("Setting Ethernet MAC failed\n");
2708                 LOAD_ERROR_EXIT(bp, load_error3);
2709         }
2710
2711         if (IS_PF(bp) && bp->pending_max) {
2712                 bnx2x_update_max_mf_config(bp, bp->pending_max);
2713                 bp->pending_max = 0;
2714         }
2715
2716         if (bp->port.pmf) {
2717                 rc = bnx2x_initial_phy_init(bp, load_mode);
2718                 if (rc)
2719                         LOAD_ERROR_EXIT(bp, load_error3);
2720         }
2721         bp->link_params.feature_config_flags &= ~FEATURE_CONFIG_BOOT_FROM_SAN;
2722
2723         /* Start fast path */
2724
2725         /* Initialize Rx filter. */
2726         bnx2x_set_rx_mode_inner(bp);
2727
2728         /* Start the Tx */
2729         switch (load_mode) {
2730         case LOAD_NORMAL:
2731                 /* Tx queue should be only re-enabled */
2732                 netif_tx_wake_all_queues(bp->dev);
2733                 break;
2734
2735         case LOAD_OPEN:
2736                 netif_tx_start_all_queues(bp->dev);
2737                 smp_mb__after_clear_bit();
2738                 break;
2739
2740         case LOAD_DIAG:
2741         case LOAD_LOOPBACK_EXT:
2742                 bp->state = BNX2X_STATE_DIAG;
2743                 break;
2744
2745         default:
2746                 break;
2747         }
2748
2749         if (bp->port.pmf)
2750                 bnx2x_update_drv_flags(bp, 1 << DRV_FLAGS_PORT_MASK, 0);
2751         else
2752                 bnx2x__link_status_update(bp);
2753
2754         /* start the timer */
2755         mod_timer(&bp->timer, jiffies + bp->current_interval);
2756
2757         if (CNIC_ENABLED(bp))
2758                 bnx2x_load_cnic(bp);
2759
2760         if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
2761                 /* mark driver is loaded in shmem2 */
2762                 u32 val;
2763                 val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]);
2764                 SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)],
2765                           val | DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
2766                           DRV_FLAGS_CAPABILITIES_LOADED_L2);
2767         }
2768
2769         /* Wait for all pending SP commands to complete */
2770         if (IS_PF(bp) && !bnx2x_wait_sp_comp(bp, ~0x0UL)) {
2771                 BNX2X_ERR("Timeout waiting for SP elements to complete\n");
2772                 bnx2x_nic_unload(bp, UNLOAD_CLOSE, false);
2773                 return -EBUSY;
2774         }
2775
2776         /* If PMF - send ADMIN DCBX msg to MFW to initiate DCBX FSM */
2777         if (bp->port.pmf && (bp->state != BNX2X_STATE_DIAG))
2778                 bnx2x_dcbx_init(bp, false);
2779
2780         DP(NETIF_MSG_IFUP, "Ending successfully NIC load\n");
2781
2782         return 0;
2783
2784 #ifndef BNX2X_STOP_ON_ERROR
2785 load_error3:
2786         if (IS_PF(bp)) {
2787                 bnx2x_int_disable_sync(bp, 1);
2788
2789                 /* Clean queueable objects */
2790                 bnx2x_squeeze_objects(bp);
2791         }
2792
2793         /* Free SKBs, SGEs, TPA pool and driver internals */
2794         bnx2x_free_skbs(bp);
2795         for_each_rx_queue(bp, i)
2796                 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
2797
2798         /* Release IRQs */
2799         bnx2x_free_irq(bp);
2800 load_error2:
2801         if (IS_PF(bp) && !BP_NOMCP(bp)) {
2802                 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
2803                 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
2804         }
2805
2806         bp->port.pmf = 0;
2807 load_error1:
2808         bnx2x_napi_disable(bp);
2809         bnx2x_del_all_napi(bp);
2810
2811         /* clear pf_load status, as it was already set */
2812         if (IS_PF(bp))
2813                 bnx2x_clear_pf_load(bp);
2814 load_error0:
2815         bnx2x_free_fp_mem(bp);
2816         bnx2x_free_fw_stats_mem(bp);
2817         bnx2x_free_mem(bp);
2818
2819         return rc;
2820 #endif /* ! BNX2X_STOP_ON_ERROR */
2821 }
2822
2823 int bnx2x_drain_tx_queues(struct bnx2x *bp)
2824 {
2825         u8 rc = 0, cos, i;
2826
2827         /* Wait until tx fastpath tasks complete */
2828         for_each_tx_queue(bp, i) {
2829                 struct bnx2x_fastpath *fp = &bp->fp[i];
2830
2831                 for_each_cos_in_tx_queue(fp, cos)
2832                         rc = bnx2x_clean_tx_queue(bp, fp->txdata_ptr[cos]);
2833                 if (rc)
2834                         return rc;
2835         }
2836         return 0;
2837 }
2838
2839 /* must be called with rtnl_lock */
2840 int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link)
2841 {
2842         int i;
2843         bool global = false;
2844
2845         DP(NETIF_MSG_IFUP, "Starting NIC unload\n");
2846
2847         /* mark driver is unloaded in shmem2 */
2848         if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
2849                 u32 val;
2850                 val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]);
2851                 SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)],
2852                           val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
2853         }
2854
2855         if (IS_PF(bp) && bp->recovery_state != BNX2X_RECOVERY_DONE &&
2856             (bp->state == BNX2X_STATE_CLOSED ||
2857              bp->state == BNX2X_STATE_ERROR)) {
2858                 /* We can get here if the driver has been unloaded
2859                  * during parity error recovery and is either waiting for a
2860                  * leader to complete or for other functions to unload and
2861                  * then ifdown has been issued. In this case we want to
2862                  * unload and let other functions to complete a recovery
2863                  * process.
2864                  */
2865                 bp->recovery_state = BNX2X_RECOVERY_DONE;
2866                 bp->is_leader = 0;
2867                 bnx2x_release_leader_lock(bp);
2868                 smp_mb();
2869
2870                 DP(NETIF_MSG_IFDOWN, "Releasing a leadership...\n");
2871                 BNX2X_ERR("Can't unload in closed or error state\n");
2872                 return -EINVAL;
2873         }
2874
2875         /* Nothing to do during unload if previous bnx2x_nic_load()
2876          * have not completed successfully - all resources are released.
2877          *
2878          * we can get here only after unsuccessful ndo_* callback, during which
2879          * dev->IFF_UP flag is still on.
2880          */
2881         if (bp->state == BNX2X_STATE_CLOSED || bp->state == BNX2X_STATE_ERROR)
2882                 return 0;
2883
2884         /* It's important to set the bp->state to the value different from
2885          * BNX2X_STATE_OPEN and only then stop the Tx. Otherwise bnx2x_tx_int()
2886          * may restart the Tx from the NAPI context (see bnx2x_tx_int()).
2887          */
2888         bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
2889         smp_mb();
2890
2891         /* indicate to VFs that the PF is going down */
2892         bnx2x_iov_channel_down(bp);
2893
2894         if (CNIC_LOADED(bp))
2895                 bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
2896
2897         /* Stop Tx */
2898         bnx2x_tx_disable(bp);
2899         netdev_reset_tc(bp->dev);
2900
2901         bp->rx_mode = BNX2X_RX_MODE_NONE;
2902
2903         del_timer_sync(&bp->timer);
2904
2905         if (IS_PF(bp)) {
2906                 /* Set ALWAYS_ALIVE bit in shmem */
2907                 bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
2908                 bnx2x_drv_pulse(bp);
2909                 bnx2x_stats_handle(bp, STATS_EVENT_STOP);
2910                 bnx2x_save_statistics(bp);
2911         }
2912
2913         /* wait till consumers catch up with producers in all queues */
2914         bnx2x_drain_tx_queues(bp);
2915
2916         /* if VF indicate to PF this function is going down (PF will delete sp
2917          * elements and clear initializations
2918          */
2919         if (IS_VF(bp))
2920                 bnx2x_vfpf_close_vf(bp);
2921         else if (unload_mode != UNLOAD_RECOVERY)
2922                 /* if this is a normal/close unload need to clean up chip*/
2923                 bnx2x_chip_cleanup(bp, unload_mode, keep_link);
2924         else {
2925                 /* Send the UNLOAD_REQUEST to the MCP */
2926                 bnx2x_send_unload_req(bp, unload_mode);
2927
2928                 /* Prevent transactions to host from the functions on the
2929                  * engine that doesn't reset global blocks in case of global
2930                  * attention once global blocks are reset and gates are opened
2931                  * (the engine which leader will perform the recovery
2932                  * last).
2933                  */
2934                 if (!CHIP_IS_E1x(bp))
2935                         bnx2x_pf_disable(bp);
2936
2937                 /* Disable HW interrupts, NAPI */
2938                 bnx2x_netif_stop(bp, 1);
2939                 /* Delete all NAPI objects */
2940                 bnx2x_del_all_napi(bp);
2941                 if (CNIC_LOADED(bp))
2942                         bnx2x_del_all_napi_cnic(bp);
2943                 /* Release IRQs */
2944                 bnx2x_free_irq(bp);
2945
2946                 /* Report UNLOAD_DONE to MCP */
2947                 bnx2x_send_unload_done(bp, false);
2948         }
2949
2950         /*
2951          * At this stage no more interrupts will arrive so we may safely clean
2952          * the queueable objects here in case they failed to get cleaned so far.
2953          */
2954         if (IS_PF(bp))
2955                 bnx2x_squeeze_objects(bp);
2956
2957         /* There should be no more pending SP commands at this stage */
2958         bp->sp_state = 0;
2959
2960         bp->port.pmf = 0;
2961
2962         /* Free SKBs, SGEs, TPA pool and driver internals */
2963         bnx2x_free_skbs(bp);
2964         if (CNIC_LOADED(bp))
2965                 bnx2x_free_skbs_cnic(bp);
2966         for_each_rx_queue(bp, i)
2967                 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
2968
2969         bnx2x_free_fp_mem(bp);
2970         if (CNIC_LOADED(bp))
2971                 bnx2x_free_fp_mem_cnic(bp);
2972
2973         if (IS_PF(bp)) {
2974                 if (CNIC_LOADED(bp))
2975                         bnx2x_free_mem_cnic(bp);
2976         }
2977         bnx2x_free_mem(bp);
2978
2979         bp->state = BNX2X_STATE_CLOSED;
2980         bp->cnic_loaded = false;
2981
2982         /* Check if there are pending parity attentions. If there are - set
2983          * RECOVERY_IN_PROGRESS.
2984          */
2985         if (IS_PF(bp) && bnx2x_chk_parity_attn(bp, &global, false)) {
2986                 bnx2x_set_reset_in_progress(bp);
2987
2988                 /* Set RESET_IS_GLOBAL if needed */
2989                 if (global)
2990                         bnx2x_set_reset_global(bp);
2991         }
2992
2993         /* The last driver must disable a "close the gate" if there is no
2994          * parity attention or "process kill" pending.
2995          */
2996         if (IS_PF(bp) &&
2997             !bnx2x_clear_pf_load(bp) &&
2998             bnx2x_reset_is_done(bp, BP_PATH(bp)))
2999                 bnx2x_disable_close_the_gate(bp);
3000
3001         DP(NETIF_MSG_IFUP, "Ending NIC unload\n");
3002
3003         return 0;
3004 }
3005
3006 int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
3007 {
3008         u16 pmcsr;
3009
3010         /* If there is no power capability, silently succeed */
3011         if (!bp->pdev->pm_cap) {
3012                 BNX2X_DEV_INFO("No power capability. Breaking.\n");
3013                 return 0;
3014         }
3015
3016         pci_read_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_CTRL, &pmcsr);
3017
3018         switch (state) {
3019         case PCI_D0:
3020                 pci_write_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_CTRL,
3021                                       ((pmcsr & ~PCI_PM_CTRL_STATE_MASK) |
3022                                        PCI_PM_CTRL_PME_STATUS));
3023
3024                 if (pmcsr & PCI_PM_CTRL_STATE_MASK)
3025                         /* delay required during transition out of D3hot */
3026                         msleep(20);
3027                 break;
3028
3029         case PCI_D3hot:
3030                 /* If there are other clients above don't
3031                    shut down the power */
3032                 if (atomic_read(&bp->pdev->enable_cnt) != 1)
3033                         return 0;
3034                 /* Don't shut down the power for emulation and FPGA */
3035                 if (CHIP_REV_IS_SLOW(bp))
3036                         return 0;
3037
3038                 pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
3039                 pmcsr |= 3;
3040
3041                 if (bp->wol)
3042                         pmcsr |= PCI_PM_CTRL_PME_ENABLE;
3043
3044                 pci_write_config_word(bp->pdev, bp->pdev->pm_cap + PCI_PM_CTRL,
3045                                       pmcsr);
3046
3047                 /* No more memory access after this point until
3048                 * device is brought back to D0.
3049                 */
3050                 break;
3051
3052         default:
3053                 dev_err(&bp->pdev->dev, "Can't support state = %d\n", state);
3054                 return -EINVAL;
3055         }
3056         return 0;
3057 }
3058
3059 /*
3060  * net_device service functions
3061  */
3062 int bnx2x_poll(struct napi_struct *napi, int budget)
3063 {
3064         int work_done = 0;
3065         u8 cos;
3066         struct bnx2x_fastpath *fp = container_of(napi, struct bnx2x_fastpath,
3067                                                  napi);
3068         struct bnx2x *bp = fp->bp;
3069
3070         while (1) {
3071 #ifdef BNX2X_STOP_ON_ERROR
3072                 if (unlikely(bp->panic)) {
3073                         napi_complete(napi);
3074                         return 0;
3075                 }
3076 #endif
3077                 if (!bnx2x_fp_lock_napi(fp))
3078                         return work_done;
3079
3080                 for_each_cos_in_tx_queue(fp, cos)
3081                         if (bnx2x_tx_queue_has_work(fp->txdata_ptr[cos]))
3082                                 bnx2x_tx_int(bp, fp->txdata_ptr[cos]);
3083
3084                 if (bnx2x_has_rx_work(fp)) {
3085                         work_done += bnx2x_rx_int(fp, budget - work_done);
3086
3087                         /* must not complete if we consumed full budget */
3088                         if (work_done >= budget) {
3089                                 bnx2x_fp_unlock_napi(fp);
3090                                 break;
3091                         }
3092                 }
3093
3094                 /* Fall out from the NAPI loop if needed */
3095                 if (!bnx2x_fp_unlock_napi(fp) &&
3096                     !(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
3097
3098                         /* No need to update SB for FCoE L2 ring as long as
3099                          * it's connected to the default SB and the SB
3100                          * has been updated when NAPI was scheduled.
3101                          */
3102                         if (IS_FCOE_FP(fp)) {
3103                                 napi_complete(napi);
3104                                 break;
3105                         }
3106                         bnx2x_update_fpsb_idx(fp);
3107                         /* bnx2x_has_rx_work() reads the status block,
3108                          * thus we need to ensure that status block indices
3109                          * have been actually read (bnx2x_update_fpsb_idx)
3110                          * prior to this check (bnx2x_has_rx_work) so that
3111                          * we won't write the "newer" value of the status block
3112                          * to IGU (if there was a DMA right after
3113                          * bnx2x_has_rx_work and if there is no rmb, the memory
3114                          * reading (bnx2x_update_fpsb_idx) may be postponed
3115                          * to right before bnx2x_ack_sb). In this case there
3116                          * will never be another interrupt until there is
3117                          * another update of the status block, while there
3118                          * is still unhandled work.
3119                          */
3120                         rmb();
3121
3122                         if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
3123                                 napi_complete(napi);
3124                                 /* Re-enable interrupts */
3125                                 DP(NETIF_MSG_RX_STATUS,
3126                                    "Update index to %d\n", fp->fp_hc_idx);
3127                                 bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID,
3128                                              le16_to_cpu(fp->fp_hc_idx),
3129                                              IGU_INT_ENABLE, 1);
3130                                 break;
3131                         }
3132                 }
3133         }
3134
3135         return work_done;
3136 }
3137
3138 #ifdef CONFIG_NET_RX_BUSY_POLL
3139 /* must be called with local_bh_disable()d */
3140 int bnx2x_low_latency_recv(struct napi_struct *napi)
3141 {
3142         struct bnx2x_fastpath *fp = container_of(napi, struct bnx2x_fastpath,
3143                                                  napi);
3144         struct bnx2x *bp = fp->bp;
3145         int found = 0;
3146
3147         if ((bp->state == BNX2X_STATE_CLOSED) ||
3148             (bp->state == BNX2X_STATE_ERROR) ||
3149             (bp->flags & (TPA_ENABLE_FLAG | GRO_ENABLE_FLAG)))
3150                 return LL_FLUSH_FAILED;
3151
3152         if (!bnx2x_fp_lock_poll(fp))
3153                 return LL_FLUSH_BUSY;
3154
3155         if (bnx2x_has_rx_work(fp))
3156                 found = bnx2x_rx_int(fp, 4);
3157
3158         bnx2x_fp_unlock_poll(fp);
3159
3160         return found;
3161 }
3162 #endif
3163
3164 /* we split the first BD into headers and data BDs
3165  * to ease the pain of our fellow microcode engineers
3166  * we use one mapping for both BDs
3167  */
3168 static u16 bnx2x_tx_split(struct bnx2x *bp,
3169                           struct bnx2x_fp_txdata *txdata,
3170                           struct sw_tx_bd *tx_buf,
3171                           struct eth_tx_start_bd **tx_bd, u16 hlen,
3172                           u16 bd_prod)
3173 {
3174         struct eth_tx_start_bd *h_tx_bd = *tx_bd;
3175         struct eth_tx_bd *d_tx_bd;
3176         dma_addr_t mapping;
3177         int old_len = le16_to_cpu(h_tx_bd->nbytes);
3178
3179         /* first fix first BD */
3180         h_tx_bd->nbytes = cpu_to_le16(hlen);
3181
3182         DP(NETIF_MSG_TX_QUEUED, "TSO split header size is %d (%x:%x)\n",
3183            h_tx_bd->nbytes, h_tx_bd->addr_hi, h_tx_bd->addr_lo);
3184
3185         /* now get a new data BD
3186          * (after the pbd) and fill it */
3187         bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
3188         d_tx_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
3189
3190         mapping = HILO_U64(le32_to_cpu(h_tx_bd->addr_hi),
3191                            le32_to_cpu(h_tx_bd->addr_lo)) + hlen;
3192
3193         d_tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
3194         d_tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
3195         d_tx_bd->nbytes = cpu_to_le16(old_len - hlen);
3196
3197         /* this marks the BD as one that has no individual mapping */
3198         tx_buf->flags |= BNX2X_TSO_SPLIT_BD;
3199
3200         DP(NETIF_MSG_TX_QUEUED,
3201            "TSO split data size is %d (%x:%x)\n",
3202            d_tx_bd->nbytes, d_tx_bd->addr_hi, d_tx_bd->addr_lo);
3203
3204         /* update tx_bd */
3205         *tx_bd = (struct eth_tx_start_bd *)d_tx_bd;
3206
3207         return bd_prod;
3208 }
3209
3210 #define bswab32(b32) ((__force __le32) swab32((__force __u32) (b32)))
3211 #define bswab16(b16) ((__force __le16) swab16((__force __u16) (b16)))
3212 static __le16 bnx2x_csum_fix(unsigned char *t_header, u16 csum, s8 fix)
3213 {
3214         __sum16 tsum = (__force __sum16) csum;
3215
3216         if (fix > 0)
3217                 tsum = ~csum_fold(csum_sub((__force __wsum) csum,
3218                                   csum_partial(t_header - fix, fix, 0)));
3219
3220         else if (fix < 0)
3221                 tsum = ~csum_fold(csum_add((__force __wsum) csum,
3222                                   csum_partial(t_header, -fix, 0)));
3223
3224         return bswab16(tsum);
3225 }
3226
3227 static u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
3228 {
3229         u32 rc;
3230         __u8 prot = 0;
3231         __be16 protocol;
3232
3233         if (skb->ip_summed != CHECKSUM_PARTIAL)
3234                 return XMIT_PLAIN;
3235
3236         protocol = vlan_get_protocol(skb);
3237         if (protocol == htons(ETH_P_IPV6)) {
3238                 rc = XMIT_CSUM_V6;
3239                 prot = ipv6_hdr(skb)->nexthdr;
3240         } else {
3241                 rc = XMIT_CSUM_V4;
3242                 prot = ip_hdr(skb)->protocol;
3243         }
3244
3245         if (!CHIP_IS_E1x(bp) && skb->encapsulation) {
3246                 if (inner_ip_hdr(skb)->version == 6) {
3247                         rc |= XMIT_CSUM_ENC_V6;
3248                         if (inner_ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
3249                                 rc |= XMIT_CSUM_TCP;
3250                 } else {
3251                         rc |= XMIT_CSUM_ENC_V4;
3252                         if (inner_ip_hdr(skb)->protocol == IPPROTO_TCP)
3253                                 rc |= XMIT_CSUM_TCP;
3254                 }
3255         }
3256         if (prot == IPPROTO_TCP)
3257                 rc |= XMIT_CSUM_TCP;
3258
3259         if (skb_is_gso_v6(skb)) {
3260                 rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP);
3261                 if (rc & XMIT_CSUM_ENC)
3262                         rc |= XMIT_GSO_ENC_V6;
3263         } else if (skb_is_gso(skb)) {
3264                 rc |= (XMIT_GSO_V4 | XMIT_CSUM_TCP);
3265                 if (rc & XMIT_CSUM_ENC)
3266                         rc |= XMIT_GSO_ENC_V4;
3267         }
3268
3269         return rc;
3270 }
3271
3272 #if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
3273 /* check if packet requires linearization (packet is too fragmented)
3274    no need to check fragmentation if page size > 8K (there will be no
3275    violation to FW restrictions) */
3276 static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
3277                              u32 xmit_type)
3278 {
3279         int to_copy = 0;
3280         int hlen = 0;
3281         int first_bd_sz = 0;
3282
3283         /* 3 = 1 (for linear data BD) + 2 (for PBD and last BD) */
3284         if (skb_shinfo(skb)->nr_frags >= (MAX_FETCH_BD - 3)) {
3285
3286                 if (xmit_type & XMIT_GSO) {
3287                         unsigned short lso_mss = skb_shinfo(skb)->gso_size;
3288                         /* Check if LSO packet needs to be copied:
3289                            3 = 1 (for headers BD) + 2 (for PBD and last BD) */
3290                         int wnd_size = MAX_FETCH_BD - 3;
3291                         /* Number of windows to check */
3292                         int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size;
3293                         int wnd_idx = 0;
3294                         int frag_idx = 0;
3295                         u32 wnd_sum = 0;
3296
3297                         /* Headers length */
3298                         hlen = (int)(skb_transport_header(skb) - skb->data) +
3299                                 tcp_hdrlen(skb);
3300
3301                         /* Amount of data (w/o headers) on linear part of SKB*/
3302                         first_bd_sz = skb_headlen(skb) - hlen;
3303
3304                         wnd_sum  = first_bd_sz;
3305
3306                         /* Calculate the first sum - it's special */
3307                         for (frag_idx = 0; frag_idx < wnd_size - 1; frag_idx++)
3308                                 wnd_sum +=
3309                                         skb_frag_size(&skb_shinfo(skb)->frags[frag_idx]);
3310
3311                         /* If there was data on linear skb data - check it */
3312                         if (first_bd_sz > 0) {
3313                                 if (unlikely(wnd_sum < lso_mss)) {
3314                                         to_copy = 1;
3315                                         goto exit_lbl;
3316                                 }
3317
3318                                 wnd_sum -= first_bd_sz;
3319                         }
3320
3321                         /* Others are easier: run through the frag list and
3322                            check all windows */
3323                         for (wnd_idx = 0; wnd_idx <= num_wnds; wnd_idx++) {
3324                                 wnd_sum +=
3325                           skb_frag_size(&skb_shinfo(skb)->frags[wnd_idx + wnd_size - 1]);
3326
3327                                 if (unlikely(wnd_sum < lso_mss)) {
3328                                         to_copy = 1;
3329                                         break;
3330                                 }
3331                                 wnd_sum -=
3332                                         skb_frag_size(&skb_shinfo(skb)->frags[wnd_idx]);
3333                         }
3334                 } else {
3335                         /* in non-LSO too fragmented packet should always
3336                            be linearized */
3337                         to_copy = 1;
3338                 }
3339         }
3340
3341 exit_lbl:
3342         if (unlikely(to_copy))
3343                 DP(NETIF_MSG_TX_QUEUED,
3344                    "Linearization IS REQUIRED for %s packet. num_frags %d  hlen %d  first_bd_sz %d\n",
3345                    (xmit_type & XMIT_GSO) ? "LSO" : "non-LSO",
3346                    skb_shinfo(skb)->nr_frags, hlen, first_bd_sz);
3347
3348         return to_copy;
3349 }
3350 #endif
3351
3352 static void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data,
3353                                  u32 xmit_type)
3354 {
3355         struct ipv6hdr *ipv6;
3356
3357         *parsing_data |= (skb_shinfo(skb)->gso_size <<
3358                               ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) &
3359                               ETH_TX_PARSE_BD_E2_LSO_MSS;
3360
3361         if (xmit_type & XMIT_GSO_ENC_V6)
3362                 ipv6 = inner_ipv6_hdr(skb);
3363         else if (xmit_type & XMIT_GSO_V6)
3364                 ipv6 = ipv6_hdr(skb);
3365         else
3366                 ipv6 = NULL;
3367
3368         if (ipv6 && ipv6->nexthdr == NEXTHDR_IPV6)
3369                 *parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
3370 }
3371
3372 /**
3373  * bnx2x_set_pbd_gso - update PBD in GSO case.
3374  *
3375  * @skb:        packet skb
3376  * @pbd:        parse BD
3377  * @xmit_type:  xmit flags
3378  */
3379 static void bnx2x_set_pbd_gso(struct sk_buff *skb,
3380                               struct eth_tx_parse_bd_e1x *pbd,
3381                               struct eth_tx_start_bd *tx_start_bd,
3382                               u32 xmit_type)
3383 {
3384         pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
3385         pbd->tcp_send_seq = bswab32(tcp_hdr(skb)->seq);
3386         pbd->tcp_flags = pbd_tcp_flags(tcp_hdr(skb));
3387
3388         if (xmit_type & XMIT_GSO_V4) {
3389                 pbd->ip_id = bswab16(ip_hdr(skb)->id);
3390                 pbd->tcp_pseudo_csum =
3391                         bswab16(~csum_tcpudp_magic(ip_hdr(skb)->saddr,
3392                                                    ip_hdr(skb)->daddr,
3393                                                    0, IPPROTO_TCP, 0));
3394
3395                 /* GSO on 57710/57711 needs FW to calculate IP checksum */
3396                 tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IP_CSUM;
3397         } else {
3398                 pbd->tcp_pseudo_csum =
3399                         bswab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
3400                                                  &ipv6_hdr(skb)->daddr,
3401                                                  0, IPPROTO_TCP, 0));
3402         }
3403
3404         pbd->global_data |=
3405                 cpu_to_le16(ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN);
3406 }
3407
3408 /**
3409  * bnx2x_set_pbd_csum_enc - update PBD with checksum and return header length
3410  *
3411  * @bp:                 driver handle
3412  * @skb:                packet skb
3413  * @parsing_data:       data to be updated
3414  * @xmit_type:          xmit flags
3415  *
3416  * 57712/578xx related, when skb has encapsulation
3417  */
3418 static u8 bnx2x_set_pbd_csum_enc(struct bnx2x *bp, struct sk_buff *skb,
3419                                  u32 *parsing_data, u32 xmit_type)
3420 {
3421         *parsing_data |=
3422                 ((((u8 *)skb_inner_transport_header(skb) - skb->data) >> 1) <<
3423                 ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W_SHIFT) &
3424                 ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W;
3425
3426         if (xmit_type & XMIT_CSUM_TCP) {
3427                 *parsing_data |= ((inner_tcp_hdrlen(skb) / 4) <<
3428                         ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
3429                         ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
3430
3431                 return skb_inner_transport_header(skb) +
3432                         inner_tcp_hdrlen(skb) - skb->data;
3433         }
3434
3435         /* We support checksum offload for TCP and UDP only.
3436          * No need to pass the UDP header length - it's a constant.
3437          */
3438         return skb_inner_transport_header(skb) +
3439                 sizeof(struct udphdr) - skb->data;
3440 }
3441
3442 /**
3443  * bnx2x_set_pbd_csum_e2 - update PBD with checksum and return header length
3444  *
3445  * @bp:                 driver handle
3446  * @skb:                packet skb
3447  * @parsing_data:       data to be updated
3448  * @xmit_type:          xmit flags
3449  *
3450  * 57712/578xx related
3451  */
3452 static u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
3453                                 u32 *parsing_data, u32 xmit_type)
3454 {
3455         *parsing_data |=
3456                 ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) <<
3457                 ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W_SHIFT) &
3458                 ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W;
3459
3460         if (xmit_type & XMIT_CSUM_TCP) {
3461                 *parsing_data |= ((tcp_hdrlen(skb) / 4) <<
3462                         ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
3463                         ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
3464
3465                 return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
3466         }
3467         /* We support checksum offload for TCP and UDP only.
3468          * No need to pass the UDP header length - it's a constant.
3469          */
3470         return skb_transport_header(skb) + sizeof(struct udphdr) - skb->data;
3471 }
3472
3473 /* set FW indication according to inner or outer protocols if tunneled */
3474 static void bnx2x_set_sbd_csum(struct bnx2x *bp, struct sk_buff *skb,
3475                                struct eth_tx_start_bd *tx_start_bd,
3476                                u32 xmit_type)
3477 {
3478         tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_L4_CSUM;
3479
3480         if (xmit_type & (XMIT_CSUM_ENC_V6 | XMIT_CSUM_V6))
3481                 tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IPV6;
3482
3483         if (!(xmit_type & XMIT_CSUM_TCP))
3484                 tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IS_UDP;
3485 }
3486
3487 /**
3488  * bnx2x_set_pbd_csum - update PBD with checksum and return header length
3489  *
3490  * @bp:         driver handle
3491  * @skb:        packet skb
3492  * @pbd:        parse BD to be updated
3493  * @xmit_type:  xmit flags
3494  */
3495 static u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb,
3496                              struct eth_tx_parse_bd_e1x *pbd,
3497                              u32 xmit_type)
3498 {
3499         u8 hlen = (skb_network_header(skb) - skb->data) >> 1;
3500
3501         /* for now NS flag is not used in Linux */
3502         pbd->global_data =
3503                 cpu_to_le16(hlen |
3504                             ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) <<
3505                              ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT));
3506
3507         pbd->ip_hlen_w = (skb_transport_header(skb) -
3508                         skb_network_header(skb)) >> 1;
3509
3510         hlen += pbd->ip_hlen_w;
3511
3512         /* We support checksum offload for TCP and UDP only */
3513         if (xmit_type & XMIT_CSUM_TCP)
3514                 hlen += tcp_hdrlen(skb) / 2;
3515         else
3516                 hlen += sizeof(struct udphdr) / 2;
3517
3518         pbd->total_hlen_w = cpu_to_le16(hlen);
3519         hlen = hlen*2;
3520
3521         if (xmit_type & XMIT_CSUM_TCP) {
3522                 pbd->tcp_pseudo_csum = bswab16(tcp_hdr(skb)->check);
3523
3524         } else {
3525                 s8 fix = SKB_CS_OFF(skb); /* signed! */
3526
3527                 DP(NETIF_MSG_TX_QUEUED,
3528                    "hlen %d  fix %d  csum before fix %x\n",
3529                    le16_to_cpu(pbd->total_hlen_w), fix, SKB_CS(skb));
3530
3531                 /* HW bug: fixup the CSUM */
3532                 pbd->tcp_pseudo_csum =
3533                         bnx2x_csum_fix(skb_transport_header(skb),
3534                                        SKB_CS(skb), fix);
3535
3536                 DP(NETIF_MSG_TX_QUEUED, "csum after fix %x\n",
3537                    pbd->tcp_pseudo_csum);
3538         }
3539
3540         return hlen;
3541 }
3542
3543 static void bnx2x_update_pbds_gso_enc(struct sk_buff *skb,
3544                                       struct eth_tx_parse_bd_e2 *pbd_e2,
3545                                       struct eth_tx_parse_2nd_bd *pbd2,
3546                                       u16 *global_data,
3547                                       u32 xmit_type)
3548 {
3549         u16 hlen_w = 0;
3550         u8 outerip_off, outerip_len = 0;
3551
3552         /* from outer IP to transport */
3553         hlen_w = (skb_inner_transport_header(skb) -
3554                   skb_network_header(skb)) >> 1;
3555
3556         /* transport len */
3557         hlen_w += inner_tcp_hdrlen(skb) >> 1;
3558
3559         pbd2->fw_ip_hdr_to_payload_w = hlen_w;
3560
3561         /* outer IP header info */
3562         if (xmit_type & XMIT_CSUM_V4) {
3563                 struct iphdr *iph = ip_hdr(skb);
3564                 u32 csum = (__force u32)(~iph->check) -
3565                            (__force u32)iph->tot_len -
3566                            (__force u32)iph->frag_off;
3567
3568                 pbd2->fw_ip_csum_wo_len_flags_frag =
3569                         bswab16(csum_fold((__force __wsum)csum));
3570         } else {
3571                 pbd2->fw_ip_hdr_to_payload_w =
3572                         hlen_w - ((sizeof(struct ipv6hdr)) >> 1);
3573         }
3574
3575         pbd2->tcp_send_seq = bswab32(inner_tcp_hdr(skb)->seq);
3576
3577         pbd2->tcp_flags = pbd_tcp_flags(inner_tcp_hdr(skb));
3578
3579         if (xmit_type & XMIT_GSO_V4) {
3580                 pbd2->hw_ip_id = bswab16(inner_ip_hdr(skb)->id);
3581
3582                 pbd_e2->data.tunnel_data.pseudo_csum =
3583                         bswab16(~csum_tcpudp_magic(
3584                                         inner_ip_hdr(skb)->saddr,
3585                                         inner_ip_hdr(skb)->daddr,
3586                                         0, IPPROTO_TCP, 0));
3587
3588                 outerip_len = ip_hdr(skb)->ihl << 1;
3589         } else {
3590                 pbd_e2->data.tunnel_data.pseudo_csum =
3591                         bswab16(~csum_ipv6_magic(
3592                                         &inner_ipv6_hdr(skb)->saddr,
3593                                         &inner_ipv6_hdr(skb)->daddr,
3594                                         0, IPPROTO_TCP, 0));
3595         }
3596
3597         outerip_off = (skb_network_header(skb) - skb->data) >> 1;
3598
3599         *global_data |=
3600                 outerip_off |
3601                 (!!(xmit_type & XMIT_CSUM_V6) <<
3602                         ETH_TX_PARSE_2ND_BD_IP_HDR_TYPE_OUTER_SHIFT) |
3603                 (outerip_len <<
3604                         ETH_TX_PARSE_2ND_BD_IP_HDR_LEN_OUTER_W_SHIFT) |
3605                 ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) <<
3606                         ETH_TX_PARSE_2ND_BD_LLC_SNAP_EN_SHIFT);
3607
3608         if (ip_hdr(skb)->protocol == IPPROTO_UDP) {
3609                 SET_FLAG(*global_data, ETH_TX_PARSE_2ND_BD_TUNNEL_UDP_EXIST, 1);
3610                 pbd2->tunnel_udp_hdr_start_w = skb_transport_offset(skb) >> 1;
3611         }
3612 }
3613
3614 /* called with netif_tx_lock
3615  * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call
3616  * netif_wake_queue()
3617  */
3618 netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
3619 {
3620         struct bnx2x *bp = netdev_priv(dev);
3621
3622         struct netdev_queue *txq;
3623         struct bnx2x_fp_txdata *txdata;
3624         struct sw_tx_bd *tx_buf;
3625         struct eth_tx_start_bd *tx_start_bd, *first_bd;
3626         struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL;
3627         struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
3628         struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
3629         struct eth_tx_parse_2nd_bd *pbd2 = NULL;
3630         u32 pbd_e2_parsing_data = 0;
3631         u16 pkt_prod, bd_prod;
3632         int nbd, txq_index;
3633         dma_addr_t mapping;
3634         u32 xmit_type = bnx2x_xmit_type(bp, skb);
3635         int i;
3636         u8 hlen = 0;
3637         __le16 pkt_size = 0;
3638         struct ethhdr *eth;
3639         u8 mac_type = UNICAST_ADDRESS;
3640
3641 #ifdef BNX2X_STOP_ON_ERROR
3642         if (unlikely(bp->panic))
3643                 return NETDEV_TX_BUSY;
3644 #endif
3645
3646         txq_index = skb_get_queue_mapping(skb);
3647         txq = netdev_get_tx_queue(dev, txq_index);
3648
3649         BUG_ON(txq_index >= MAX_ETH_TXQ_IDX(bp) + (CNIC_LOADED(bp) ? 1 : 0));
3650
3651         txdata = &bp->bnx2x_txq[txq_index];
3652
3653         /* enable this debug print to view the transmission queue being used
3654         DP(NETIF_MSG_TX_QUEUED, "indices: txq %d, fp %d, txdata %d\n",
3655            txq_index, fp_index, txdata_index); */
3656
3657         /* enable this debug print to view the transmission details
3658         DP(NETIF_MSG_TX_QUEUED,
3659            "transmitting packet cid %d fp index %d txdata_index %d tx_data ptr %p fp pointer %p\n",
3660            txdata->cid, fp_index, txdata_index, txdata, fp); */
3661
3662         if (unlikely(bnx2x_tx_avail(bp, txdata) <
3663                         skb_shinfo(skb)->nr_frags +
3664                         BDS_PER_TX_PKT +
3665                         NEXT_CNT_PER_TX_PKT(MAX_BDS_PER_TX_PKT))) {
3666                 /* Handle special storage cases separately */
3667                 if (txdata->tx_ring_size == 0) {
3668                         struct bnx2x_eth_q_stats *q_stats =
3669                                 bnx2x_fp_qstats(bp, txdata->parent_fp);
3670                         q_stats->driver_filtered_tx_pkt++;
3671                         dev_kfree_skb(skb);
3672                         return NETDEV_TX_OK;
3673                 }
3674                 bnx2x_fp_qstats(bp, txdata->parent_fp)->driver_xoff++;
3675                 netif_tx_stop_queue(txq);
3676                 BNX2X_ERR("BUG! Tx ring full when queue awake!\n");
3677
3678                 return NETDEV_TX_BUSY;
3679         }
3680
3681         DP(NETIF_MSG_TX_QUEUED,
3682            "queue[%d]: SKB: summed %x  protocol %x protocol(%x,%x) gso type %x  xmit_type %x len %d\n",
3683            txq_index, skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
3684            ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type,
3685            skb->len);
3686
3687         eth = (struct ethhdr *)skb->data;
3688
3689         /* set flag according to packet type (UNICAST_ADDRESS is default)*/
3690         if (unlikely(is_multicast_ether_addr(eth->h_dest))) {
3691                 if (is_broadcast_ether_addr(eth->h_dest))
3692                         mac_type = BROADCAST_ADDRESS;
3693                 else
3694                         mac_type = MULTICAST_ADDRESS;
3695         }
3696
3697 #if (MAX_SKB_FRAGS >= MAX_FETCH_BD - BDS_PER_TX_PKT)
3698         /* First, check if we need to linearize the skb (due to FW
3699            restrictions). No need to check fragmentation if page size > 8K
3700            (there will be no violation to FW restrictions) */
3701         if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
3702                 /* Statistics of linearization */
3703                 bp->lin_cnt++;
3704                 if (skb_linearize(skb) != 0) {
3705                         DP(NETIF_MSG_TX_QUEUED,
3706                            "SKB linearization failed - silently dropping this SKB\n");
3707                         dev_kfree_skb_any(skb);
3708                         return NETDEV_TX_OK;
3709                 }
3710         }
3711 #endif
3712         /* Map skb linear data for DMA */
3713         mapping = dma_map_single(&bp->pdev->dev, skb->data,
3714                                  skb_headlen(skb), DMA_TO_DEVICE);
3715         if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
3716                 DP(NETIF_MSG_TX_QUEUED,
3717                    "SKB mapping failed - silently dropping this SKB\n");
3718                 dev_kfree_skb_any(skb);
3719                 return NETDEV_TX_OK;
3720         }
3721         /*
3722         Please read carefully. First we use one BD which we mark as start,
3723         then we have a parsing info BD (used for TSO or xsum),
3724         and only then we have the rest of the TSO BDs.
3725         (don't forget to mark the last one as last,
3726         and to unmap only AFTER you write to the BD ...)
3727         And above all, all pdb sizes are in words - NOT DWORDS!
3728         */
3729
3730         /* get current pkt produced now - advance it just before sending packet
3731          * since mapping of pages may fail and cause packet to be dropped
3732          */
3733         pkt_prod = txdata->tx_pkt_prod;
3734         bd_prod = TX_BD(txdata->tx_bd_prod);
3735
3736         /* get a tx_buf and first BD
3737          * tx_start_bd may be changed during SPLIT,
3738          * but first_bd will always stay first
3739          */
3740         tx_buf = &txdata->tx_buf_ring[TX_BD(pkt_prod)];
3741         tx_start_bd = &txdata->tx_desc_ring[bd_prod].start_bd;
3742         first_bd = tx_start_bd;
3743
3744         tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
3745
3746         /* header nbd: indirectly zero other flags! */
3747         tx_start_bd->general_data = 1 << ETH_TX_START_BD_HDR_NBDS_SHIFT;
3748
3749         /* remember the first BD of the packet */
3750         tx_buf->first_bd = txdata->tx_bd_prod;
3751         tx_buf->skb = skb;
3752         tx_buf->flags = 0;
3753
3754         DP(NETIF_MSG_TX_QUEUED,
3755            "sending pkt %u @%p  next_idx %u  bd %u @%p\n",
3756            pkt_prod, tx_buf, txdata->tx_pkt_prod, bd_prod, tx_start_bd);
3757
3758         if (vlan_tx_tag_present(skb)) {
3759                 tx_start_bd->vlan_or_ethertype =
3760                     cpu_to_le16(vlan_tx_tag_get(skb));
3761                 tx_start_bd->bd_flags.as_bitfield |=
3762                     (X_ETH_OUTBAND_VLAN << ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
3763         } else {
3764                 /* when transmitting in a vf, start bd must hold the ethertype
3765                  * for fw to enforce it
3766                  */
3767                 if (IS_VF(bp))
3768                         tx_start_bd->vlan_or_ethertype =
3769                                 cpu_to_le16(ntohs(eth->h_proto));
3770                 else
3771                         /* used by FW for packet accounting */
3772                         tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
3773         }
3774
3775         nbd = 2; /* start_bd + pbd + frags (updated when pages are mapped) */
3776
3777         /* turn on parsing and get a BD */
3778         bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
3779
3780         if (xmit_type & XMIT_CSUM)
3781                 bnx2x_set_sbd_csum(bp, skb, tx_start_bd, xmit_type);
3782
3783         if (!CHIP_IS_E1x(bp)) {
3784                 pbd_e2 = &txdata->tx_desc_ring[bd_prod].parse_bd_e2;
3785                 memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
3786
3787                 if (xmit_type & XMIT_CSUM_ENC) {
3788                         u16 global_data = 0;
3789
3790                         /* Set PBD in enc checksum offload case */
3791                         hlen = bnx2x_set_pbd_csum_enc(bp, skb,
3792                                                       &pbd_e2_parsing_data,
3793                                                       xmit_type);
3794
3795                         /* turn on 2nd parsing and get a BD */
3796                         bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
3797
3798                         pbd2 = &txdata->tx_desc_ring[bd_prod].parse_2nd_bd;
3799
3800                         memset(pbd2, 0, sizeof(*pbd2));
3801
3802                         pbd_e2->data.tunnel_data.ip_hdr_start_inner_w =
3803                                 (skb_inner_network_header(skb) -
3804                                  skb->data) >> 1;
3805
3806                         if (xmit_type & XMIT_GSO_ENC)
3807                                 bnx2x_update_pbds_gso_enc(skb, pbd_e2, pbd2,
3808                                                           &global_data,
3809                                                           xmit_type);
3810
3811                         pbd2->global_data = cpu_to_le16(global_data);
3812
3813                         /* add addition parse BD indication to start BD */
3814                         SET_FLAG(tx_start_bd->general_data,
3815                                  ETH_TX_START_BD_PARSE_NBDS, 1);
3816                         /* set encapsulation flag in start BD */
3817                         SET_FLAG(tx_start_bd->general_data,
3818                                  ETH_TX_START_BD_TUNNEL_EXIST, 1);
3819                         nbd++;
3820                 } else if (xmit_type & XMIT_CSUM) {
3821                         /* Set PBD in checksum offload case w/o encapsulation */
3822                         hlen = bnx2x_set_pbd_csum_e2(bp, skb,
3823                                                      &pbd_e2_parsing_data,
3824                                                      xmit_type);
3825                 }
3826
3827                 /* Add the macs to the parsing BD this is a vf */
3828                 if (IS_VF(bp)) {
3829                         /* override GRE parameters in BD */
3830                         bnx2x_set_fw_mac_addr(&pbd_e2->data.mac_addr.src_hi,
3831                                               &pbd_e2->data.mac_addr.src_mid,
3832                                               &pbd_e2->data.mac_addr.src_lo,
3833                                               eth->h_source);
3834
3835                         bnx2x_set_fw_mac_addr(&pbd_e2->data.mac_addr.dst_hi,
3836                                               &pbd_e2->data.mac_addr.dst_mid,
3837                                               &pbd_e2->data.mac_addr.dst_lo,
3838                                               eth->h_dest);
3839                 }
3840
3841                 SET_FLAG(pbd_e2_parsing_data,
3842                          ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE, mac_type);
3843         } else {
3844                 u16 global_data = 0;
3845                 pbd_e1x = &txdata->tx_desc_ring[bd_prod].parse_bd_e1x;
3846                 memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
3847                 /* Set PBD in checksum offload case */
3848                 if (xmit_type & XMIT_CSUM)
3849                         hlen = bnx2x_set_pbd_csum(bp, skb, pbd_e1x, xmit_type);
3850
3851                 SET_FLAG(global_data,
3852                          ETH_TX_PARSE_BD_E1X_ETH_ADDR_TYPE, mac_type);
3853                 pbd_e1x->global_data |= cpu_to_le16(global_data);
3854         }
3855
3856         /* Setup the data pointer of the first BD of the packet */
3857         tx_start_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
3858         tx_start_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
3859         tx_start_bd->nbytes = cpu_to_le16(skb_headlen(skb));
3860         pkt_size = tx_start_bd->nbytes;
3861
3862         DP(NETIF_MSG_TX_QUEUED,
3863            "first bd @%p  addr (%x:%x)  nbytes %d  flags %x  vlan %x\n",
3864            tx_start_bd, tx_start_bd->addr_hi, tx_start_bd->addr_lo,
3865            le16_to_cpu(tx_start_bd->nbytes),
3866            tx_start_bd->bd_flags.as_bitfield,
3867            le16_to_cpu(tx_start_bd->vlan_or_ethertype));
3868
3869         if (xmit_type & XMIT_GSO) {
3870
3871                 DP(NETIF_MSG_TX_QUEUED,
3872                    "TSO packet len %d  hlen %d  total len %d  tso size %d\n",
3873                    skb->len, hlen, skb_headlen(skb),
3874                    skb_shinfo(skb)->gso_size);
3875
3876                 tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_SW_LSO;
3877
3878                 if (unlikely(skb_headlen(skb) > hlen)) {
3879                         nbd++;
3880                         bd_prod = bnx2x_tx_split(bp, txdata, tx_buf,
3881                                                  &tx_start_bd, hlen,
3882                                                  bd_prod);
3883                 }
3884                 if (!CHIP_IS_E1x(bp))
3885                         bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
3886                                              xmit_type);
3887                 else
3888                         bnx2x_set_pbd_gso(skb, pbd_e1x, first_bd, xmit_type);
3889         }
3890
3891         /* Set the PBD's parsing_data field if not zero
3892          * (for the chips newer than 57711).
3893          */
3894         if (pbd_e2_parsing_data)
3895                 pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data);
3896
3897         tx_data_bd = (struct eth_tx_bd *)tx_start_bd;
3898
3899         /* Handle fragmented skb */
3900         for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
3901                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
3902
3903                 mapping = skb_frag_dma_map(&bp->pdev->dev, frag, 0,
3904                                            skb_frag_size(frag), DMA_TO_DEVICE);
3905                 if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
3906                         unsigned int pkts_compl = 0, bytes_compl = 0;
3907
3908                         DP(NETIF_MSG_TX_QUEUED,
3909                            "Unable to map page - dropping packet...\n");
3910
3911                         /* we need unmap all buffers already mapped
3912                          * for this SKB;
3913                          * first_bd->nbd need to be properly updated
3914                          * before call to bnx2x_free_tx_pkt
3915                          */
3916                         first_bd->nbd = cpu_to_le16(nbd);
3917                         bnx2x_free_tx_pkt(bp, txdata,
3918                                           TX_BD(txdata->tx_pkt_prod),
3919                                           &pkts_compl, &bytes_compl);
3920                         return NETDEV_TX_OK;
3921                 }
3922
3923                 bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
3924                 tx_data_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
3925                 if (total_pkt_bd == NULL)
3926                         total_pkt_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
3927
3928                 tx_data_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
3929                 tx_data_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
3930                 tx_data_bd->nbytes = cpu_to_le16(skb_frag_size(frag));
3931                 le16_add_cpu(&pkt_size, skb_frag_size(frag));
3932                 nbd++;
3933
3934                 DP(NETIF_MSG_TX_QUEUED,
3935                    "frag %d  bd @%p  addr (%x:%x)  nbytes %d\n",
3936                    i, tx_data_bd, tx_data_bd->addr_hi, tx_data_bd->addr_lo,
3937                    le16_to_cpu(tx_data_bd->nbytes));
3938         }
3939
3940         DP(NETIF_MSG_TX_QUEUED, "last bd @%p\n", tx_data_bd);
3941
3942         /* update with actual num BDs */
3943         first_bd->nbd = cpu_to_le16(nbd);
3944
3945         bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
3946
3947         /* now send a tx doorbell, counting the next BD
3948          * if the packet contains or ends with it
3949          */
3950         if (TX_BD_POFF(bd_prod) < nbd)
3951                 nbd++;
3952
3953         /* total_pkt_bytes should be set on the first data BD if
3954          * it's not an LSO packet and there is more than one
3955          * data BD. In this case pkt_size is limited by an MTU value.
3956          * However we prefer to set it for an LSO packet (while we don't
3957          * have to) in order to save some CPU cycles in a none-LSO
3958          * case, when we much more care about them.
3959          */
3960         if (total_pkt_bd != NULL)
3961                 total_pkt_bd->total_pkt_bytes = pkt_size;
3962
3963         if (pbd_e1x)
3964                 DP(NETIF_MSG_TX_QUEUED,
3965                    "PBD (E1X) @%p  ip_data %x  ip_hlen %u  ip_id %u  lso_mss %u  tcp_flags %x  xsum %x  seq %u  hlen %u\n",
3966                    pbd_e1x, pbd_e1x->global_data, pbd_e1x->ip_hlen_w,
3967                    pbd_e1x->ip_id, pbd_e1x->lso_mss, pbd_e1x->tcp_flags,
3968                    pbd_e1x->tcp_pseudo_csum, pbd_e1x->tcp_send_seq,
3969                     le16_to_cpu(pbd_e1x->total_hlen_w));
3970         if (pbd_e2)
3971                 DP(NETIF_MSG_TX_QUEUED,
3972                    "PBD (E2) @%p  dst %x %x %x src %x %x %x parsing_data %x\n",
3973                    pbd_e2,
3974                    pbd_e2->data.mac_addr.dst_hi,
3975                    pbd_e2->data.mac_addr.dst_mid,
3976                    pbd_e2->data.mac_addr.dst_lo,
3977                    pbd_e2->data.mac_addr.src_hi,
3978                    pbd_e2->data.mac_addr.src_mid,
3979                    pbd_e2->data.mac_addr.src_lo,
3980                    pbd_e2->parsing_data);
3981         DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %d  bd %u\n", nbd, bd_prod);
3982
3983         netdev_tx_sent_queue(txq, skb->len);
3984
3985         skb_tx_timestamp(skb);
3986
3987         txdata->tx_pkt_prod++;
3988         /*
3989          * Make sure that the BD data is updated before updating the producer
3990          * since FW might read the BD right after the producer is updated.
3991          * This is only applicable for weak-ordered memory model archs such
3992          * as IA-64. The following barrier is also mandatory since FW will
3993          * assumes packets must have BDs.
3994          */
3995         wmb();
3996
3997         txdata->tx_db.data.prod += nbd;
3998         barrier();
3999
4000         DOORBELL(bp, txdata->cid, txdata->tx_db.raw);
4001
4002         mmiowb();
4003
4004         txdata->tx_bd_prod += nbd;
4005
4006         if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_DESC_PER_TX_PKT)) {
4007                 netif_tx_stop_queue(txq);
4008
4009                 /* paired memory barrier is in bnx2x_tx_int(), we have to keep
4010                  * ordering of set_bit() in netif_tx_stop_queue() and read of
4011                  * fp->bd_tx_cons */
4012                 smp_mb();
4013
4014                 bnx2x_fp_qstats(bp, txdata->parent_fp)->driver_xoff++;
4015                 if (bnx2x_tx_avail(bp, txdata) >= MAX_DESC_PER_TX_PKT)
4016                         netif_tx_wake_queue(txq);
4017         }
4018         txdata->tx_pkt++;
4019
4020         return NETDEV_TX_OK;
4021 }
4022
4023 /**
4024  * bnx2x_setup_tc - routine to configure net_device for multi tc
4025  *
4026  * @netdev: net device to configure
4027  * @tc: number of traffic classes to enable
4028  *
4029  * callback connected to the ndo_setup_tc function pointer
4030  */
4031 int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
4032 {
4033         int cos, prio, count, offset;
4034         struct bnx2x *bp = netdev_priv(dev);
4035
4036         /* setup tc must be called under rtnl lock */
4037         ASSERT_RTNL();
4038
4039         /* no traffic classes requested. Aborting */
4040         if (!num_tc) {
4041                 netdev_reset_tc(dev);
4042                 return 0;
4043         }
4044
4045         /* requested to support too many traffic classes */
4046         if (num_tc > bp->max_cos) {
4047                 BNX2X_ERR("support for too many traffic classes requested: %d. Max supported is %d\n",
4048                           num_tc, bp->max_cos);
4049                 return -EINVAL;
4050         }
4051
4052         /* declare amount of supported traffic classes */
4053         if (netdev_set_num_tc(dev, num_tc)) {
4054                 BNX2X_ERR("failed to declare %d traffic classes\n", num_tc);
4055                 return -EINVAL;
4056         }
4057
4058         /* configure priority to traffic class mapping */
4059         for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
4060                 netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
4061                 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
4062                    "mapping priority %d to tc %d\n",
4063                    prio, bp->prio_to_cos[prio]);
4064         }
4065
4066         /* Use this configuration to differentiate tc0 from other COSes
4067            This can be used for ets or pfc, and save the effort of setting
4068            up a multio class queue disc or negotiating DCBX with a switch
4069         netdev_set_prio_tc_map(dev, 0, 0);
4070         DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", 0, 0);
4071         for (prio = 1; prio < 16; prio++) {
4072                 netdev_set_prio_tc_map(dev, prio, 1);
4073                 DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", prio, 1);
4074         } */
4075
4076         /* configure traffic class to transmission queue mapping */
4077         for (cos = 0; cos < bp->max_cos; cos++) {
4078                 count = BNX2X_NUM_ETH_QUEUES(bp);
4079                 offset = cos * BNX2X_NUM_NON_CNIC_QUEUES(bp);
4080                 netdev_set_tc_queue(dev, cos, count, offset);
4081                 DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
4082                    "mapping tc %d to offset %d count %d\n",
4083                    cos, offset, count);
4084         }
4085
4086         return 0;
4087 }
4088
4089 /* called with rtnl_lock */
4090 int bnx2x_change_mac_addr(struct net_device *dev, void *p)
4091 {
4092         struct sockaddr *addr = p;
4093         struct bnx2x *bp = netdev_priv(dev);
4094         int rc = 0;
4095
4096         if (!bnx2x_is_valid_ether_addr(bp, addr->sa_data)) {
4097                 BNX2X_ERR("Requested MAC address is not valid\n");
4098                 return -EINVAL;
4099         }
4100
4101         if ((IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp)) &&
4102             !is_zero_ether_addr(addr->sa_data)) {
4103                 BNX2X_ERR("Can't configure non-zero address on iSCSI or FCoE functions in MF-SD mode\n");
4104                 return -EINVAL;
4105         }
4106
4107         if (netif_running(dev))  {
4108                 rc = bnx2x_set_eth_mac(bp, false);
4109                 if (rc)
4110                         return rc;
4111         }
4112
4113         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
4114
4115         if (netif_running(dev))
4116                 rc = bnx2x_set_eth_mac(bp, true);
4117
4118         return rc;
4119 }
4120
4121 static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index)
4122 {
4123         union host_hc_status_block *sb = &bnx2x_fp(bp, fp_index, status_blk);
4124         struct bnx2x_fastpath *fp = &bp->fp[fp_index];
4125         u8 cos;
4126
4127         /* Common */
4128
4129         if (IS_FCOE_IDX(fp_index)) {
4130                 memset(sb, 0, sizeof(union host_hc_status_block));
4131                 fp->status_blk_mapping = 0;
4132         } else {
4133                 /* status blocks */
4134                 if (!CHIP_IS_E1x(bp))
4135                         BNX2X_PCI_FREE(sb->e2_sb,
4136                                        bnx2x_fp(bp, fp_index,
4137                                                 status_blk_mapping),
4138                                        sizeof(struct host_hc_status_block_e2));
4139                 else
4140                         BNX2X_PCI_FREE(sb->e1x_sb,
4141                                        bnx2x_fp(bp, fp_index,
4142                                                 status_blk_mapping),
4143                                        sizeof(struct host_hc_status_block_e1x));
4144         }
4145
4146         /* Rx */
4147         if (!skip_rx_queue(bp, fp_index)) {
4148                 bnx2x_free_rx_bds(fp);
4149
4150                 /* fastpath rx rings: rx_buf rx_desc rx_comp */
4151                 BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_buf_ring));
4152                 BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_desc_ring),
4153                                bnx2x_fp(bp, fp_index, rx_desc_mapping),
4154                                sizeof(struct eth_rx_bd) * NUM_RX_BD);
4155
4156                 BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_comp_ring),
4157                                bnx2x_fp(bp, fp_index, rx_comp_mapping),
4158                                sizeof(struct eth_fast_path_rx_cqe) *
4159                                NUM_RCQ_BD);
4160
4161                 /* SGE ring */
4162                 BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_page_ring));
4163                 BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_sge_ring),
4164                                bnx2x_fp(bp, fp_index, rx_sge_mapping),
4165                                BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
4166         }
4167
4168         /* Tx */
4169         if (!skip_tx_queue(bp, fp_index)) {
4170                 /* fastpath tx rings: tx_buf tx_desc */
4171                 for_each_cos_in_tx_queue(fp, cos) {
4172                         struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos];
4173
4174                         DP(NETIF_MSG_IFDOWN,
4175                            "freeing tx memory of fp %d cos %d cid %d\n",
4176                            fp_index, cos, txdata->cid);
4177
4178                         BNX2X_FREE(txdata->tx_buf_ring);
4179                         BNX2X_PCI_FREE(txdata->tx_desc_ring,
4180                                 txdata->tx_desc_mapping,
4181                                 sizeof(union eth_tx_bd_types) * NUM_TX_BD);
4182                 }
4183         }
4184         /* end of fastpath */
4185 }
4186
4187 void bnx2x_free_fp_mem_cnic(struct bnx2x *bp)
4188 {
4189         int i;
4190         for_each_cnic_queue(bp, i)
4191                 bnx2x_free_fp_mem_at(bp, i);
4192 }
4193
4194 void bnx2x_free_fp_mem(struct bnx2x *bp)
4195 {
4196         int i;
4197         for_each_eth_queue(bp, i)
4198                 bnx2x_free_fp_mem_at(bp, i);
4199 }
4200
4201 static void set_sb_shortcuts(struct bnx2x *bp, int index)
4202 {
4203         union host_hc_status_block status_blk = bnx2x_fp(bp, index, status_blk);
4204         if (!CHIP_IS_E1x(bp)) {
4205                 bnx2x_fp(bp, index, sb_index_values) =
4206                         (__le16 *)status_blk.e2_sb->sb.index_values;
4207                 bnx2x_fp(bp, index, sb_running_index) =
4208                         (__le16 *)status_blk.e2_sb->sb.running_index;
4209         } else {
4210                 bnx2x_fp(bp, index, sb_index_values) =
4211                         (__le16 *)status_blk.e1x_sb->sb.index_values;
4212                 bnx2x_fp(bp, index, sb_running_index) =
4213                         (__le16 *)status_blk.e1x_sb->sb.running_index;
4214         }
4215 }
4216
4217 /* Returns the number of actually allocated BDs */
4218 static int bnx2x_alloc_rx_bds(struct bnx2x_fastpath *fp,
4219                               int rx_ring_size)
4220 {
4221         struct bnx2x *bp = fp->bp;
4222         u16 ring_prod, cqe_ring_prod;
4223         int i, failure_cnt = 0;
4224
4225         fp->rx_comp_cons = 0;
4226         cqe_ring_prod = ring_prod = 0;
4227
4228         /* This routine is called only during fo init so
4229          * fp->eth_q_stats.rx_skb_alloc_failed = 0
4230          */
4231         for (i = 0; i < rx_ring_size; i++) {
4232                 if (bnx2x_alloc_rx_data(bp, fp, ring_prod, GFP_KERNEL) < 0) {
4233                         failure_cnt++;
4234                         continue;
4235                 }
4236                 ring_prod = NEXT_RX_IDX(ring_prod);
4237                 cqe_ring_prod = NEXT_RCQ_IDX(cqe_ring_prod);
4238                 WARN_ON(ring_prod <= (i - failure_cnt));
4239         }
4240
4241         if (failure_cnt)
4242                 BNX2X_ERR("was only able to allocate %d rx skbs on queue[%d]\n",
4243                           i - failure_cnt, fp->index);
4244
4245         fp->rx_bd_prod = ring_prod;
4246         /* Limit the CQE producer by the CQE ring size */
4247         fp->rx_comp_prod = min_t(u16, NUM_RCQ_RINGS*RCQ_DESC_CNT,
4248                                cqe_ring_prod);
4249         fp->rx_pkt = fp->rx_calls = 0;
4250
4251         bnx2x_fp_stats(bp, fp)->eth_q_stats.rx_skb_alloc_failed += failure_cnt;
4252
4253         return i - failure_cnt;
4254 }
4255
4256 static void bnx2x_set_next_page_rx_cq(struct bnx2x_fastpath *fp)
4257 {
4258         int i;
4259
4260         for (i = 1; i <= NUM_RCQ_RINGS; i++) {
4261                 struct eth_rx_cqe_next_page *nextpg;
4262
4263                 nextpg = (struct eth_rx_cqe_next_page *)
4264                         &fp->rx_comp_ring[RCQ_DESC_CNT * i - 1];
4265                 nextpg->addr_hi =
4266                         cpu_to_le32(U64_HI(fp->rx_comp_mapping +
4267                                    BCM_PAGE_SIZE*(i % NUM_RCQ_RINGS)));
4268                 nextpg->addr_lo =
4269                         cpu_to_le32(U64_LO(fp->rx_comp_mapping +
4270                                    BCM_PAGE_SIZE*(i % NUM_RCQ_RINGS)));
4271         }
4272 }
4273
4274 static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
4275 {
4276         union host_hc_status_block *sb;
4277         struct bnx2x_fastpath *fp = &bp->fp[index];
4278         int ring_size = 0;
4279         u8 cos;
4280         int rx_ring_size = 0;
4281
4282         if (!bp->rx_ring_size &&
4283             (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp))) {
4284                 rx_ring_size = MIN_RX_SIZE_NONTPA;
4285                 bp->rx_ring_size = rx_ring_size;
4286         } else if (!bp->rx_ring_size) {
4287                 rx_ring_size = MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp);
4288
4289                 if (CHIP_IS_E3(bp)) {
4290                         u32 cfg = SHMEM_RD(bp,
4291                                            dev_info.port_hw_config[BP_PORT(bp)].
4292                                            default_cfg);
4293
4294                         /* Decrease ring size for 1G functions */
4295                         if ((cfg & PORT_HW_CFG_NET_SERDES_IF_MASK) ==
4296                             PORT_HW_CFG_NET_SERDES_IF_SGMII)
4297                                 rx_ring_size /= 10;
4298                 }
4299
4300                 /* allocate at least number of buffers required by FW */
4301                 rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
4302                                      MIN_RX_SIZE_TPA, rx_ring_size);
4303
4304                 bp->rx_ring_size = rx_ring_size;
4305         } else /* if rx_ring_size specified - use it */
4306                 rx_ring_size = bp->rx_ring_size;
4307
4308         DP(BNX2X_MSG_SP, "calculated rx_ring_size %d\n", rx_ring_size);
4309
4310         /* Common */
4311         sb = &bnx2x_fp(bp, index, status_blk);
4312
4313         if (!IS_FCOE_IDX(index)) {
4314                 /* status blocks */
4315                 if (!CHIP_IS_E1x(bp))
4316                         BNX2X_PCI_ALLOC(sb->e2_sb,
4317                                 &bnx2x_fp(bp, index, status_blk_mapping),
4318                                 sizeof(struct host_hc_status_block_e2));
4319                 else
4320                         BNX2X_PCI_ALLOC(sb->e1x_sb,
4321                                 &bnx2x_fp(bp, index, status_blk_mapping),
4322                             sizeof(struct host_hc_status_block_e1x));
4323         }
4324
4325         /* FCoE Queue uses Default SB and doesn't ACK the SB, thus no need to
4326          * set shortcuts for it.
4327          */
4328         if (!IS_FCOE_IDX(index))
4329                 set_sb_shortcuts(bp, index);
4330
4331         /* Tx */
4332         if (!skip_tx_queue(bp, index)) {
4333                 /* fastpath tx rings: tx_buf tx_desc */
4334                 for_each_cos_in_tx_queue(fp, cos) {
4335                         struct bnx2x_fp_txdata *txdata = fp->txdata_ptr[cos];
4336
4337                         DP(NETIF_MSG_IFUP,
4338                            "allocating tx memory of fp %d cos %d\n",
4339                            index, cos);
4340
4341                         BNX2X_ALLOC(txdata->tx_buf_ring,
4342                                 sizeof(struct sw_tx_bd) * NUM_TX_BD);
4343                         BNX2X_PCI_ALLOC(txdata->tx_desc_ring,
4344                                 &txdata->tx_desc_mapping,
4345                                 sizeof(union eth_tx_bd_types) * NUM_TX_BD);
4346                 }
4347         }
4348
4349         /* Rx */
4350         if (!skip_rx_queue(bp, index)) {
4351                 /* fastpath rx rings: rx_buf rx_desc rx_comp */
4352                 BNX2X_ALLOC(bnx2x_fp(bp, index, rx_buf_ring),
4353                                 sizeof(struct sw_rx_bd) * NUM_RX_BD);
4354                 BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_desc_ring),
4355                                 &bnx2x_fp(bp, index, rx_desc_mapping),
4356                                 sizeof(struct eth_rx_bd) * NUM_RX_BD);
4357
4358                 /* Seed all CQEs by 1s */
4359                 BNX2X_PCI_FALLOC(bnx2x_fp(bp, index, rx_comp_ring),
4360                                  &bnx2x_fp(bp, index, rx_comp_mapping),
4361                                  sizeof(struct eth_fast_path_rx_cqe) *
4362                                  NUM_RCQ_BD);
4363
4364                 /* SGE ring */
4365                 BNX2X_ALLOC(bnx2x_fp(bp, index, rx_page_ring),
4366                                 sizeof(struct sw_rx_page) * NUM_RX_SGE);
4367                 BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_sge_ring),
4368                                 &bnx2x_fp(bp, index, rx_sge_mapping),
4369                                 BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
4370                 /* RX BD ring */
4371                 bnx2x_set_next_page_rx_bd(fp);
4372
4373                 /* CQ ring */
4374                 bnx2x_set_next_page_rx_cq(fp);
4375
4376                 /* BDs */
4377                 ring_size = bnx2x_alloc_rx_bds(fp, rx_ring_size);
4378                 if (ring_size < rx_ring_size)
4379                         goto alloc_mem_err;
4380         }
4381
4382         return 0;
4383
4384 /* handles low memory cases */
4385 alloc_mem_err:
4386         BNX2X_ERR("Unable to allocate full memory for queue %d (size %d)\n",
4387                                                 index, ring_size);
4388         /* FW will drop all packets if queue is not big enough,
4389          * In these cases we disable the queue
4390          * Min size is different for OOO, TPA and non-TPA queues
4391          */
4392         if (ring_size < (fp->disable_tpa ?
4393                                 MIN_RX_SIZE_NONTPA : MIN_RX_SIZE_TPA)) {
4394                         /* release memory allocated for this queue */
4395                         bnx2x_free_fp_mem_at(bp, index);
4396                         return -ENOMEM;
4397         }
4398         return 0;
4399 }
4400
4401 int bnx2x_alloc_fp_mem_cnic(struct bnx2x *bp)
4402 {
4403         if (!NO_FCOE(bp))
4404                 /* FCoE */
4405                 if (bnx2x_alloc_fp_mem_at(bp, FCOE_IDX(bp)))
4406                         /* we will fail load process instead of mark
4407                          * NO_FCOE_FLAG
4408                          */
4409                         return -ENOMEM;
4410
4411         return 0;
4412 }
4413
4414 int bnx2x_alloc_fp_mem(struct bnx2x *bp)
4415 {
4416         int i;
4417
4418         /* 1. Allocate FP for leading - fatal if error
4419          * 2. Allocate RSS - fix number of queues if error
4420          */
4421
4422         /* leading */
4423         if (bnx2x_alloc_fp_mem_at(bp, 0))
4424                 return -ENOMEM;
4425
4426         /* RSS */
4427         for_each_nondefault_eth_queue(bp, i)
4428                 if (bnx2x_alloc_fp_mem_at(bp, i))
4429                         break;
4430
4431         /* handle memory failures */
4432         if (i != BNX2X_NUM_ETH_QUEUES(bp)) {
4433                 int delta = BNX2X_NUM_ETH_QUEUES(bp) - i;
4434
4435                 WARN_ON(delta < 0);
4436                 bnx2x_shrink_eth_fp(bp, delta);
4437                 if (CNIC_SUPPORT(bp))
4438                         /* move non eth FPs next to last eth FP
4439                          * must be done in that order
4440                          * FCOE_IDX < FWD_IDX < OOO_IDX
4441                          */
4442
4443                         /* move FCoE fp even NO_FCOE_FLAG is on */
4444                         bnx2x_move_fp(bp, FCOE_IDX(bp), FCOE_IDX(bp) - delta);
4445                 bp->num_ethernet_queues -= delta;
4446                 bp->num_queues = bp->num_ethernet_queues +
4447                                  bp->num_cnic_queues;
4448                 BNX2X_ERR("Adjusted num of queues from %d to %d\n",
4449                           bp->num_queues + delta, bp->num_queues);
4450         }
4451
4452         return 0;
4453 }
4454
4455 void bnx2x_free_mem_bp(struct bnx2x *bp)
4456 {
4457         int i;
4458
4459         for (i = 0; i < bp->fp_array_size; i++)
4460                 kfree(bp->fp[i].tpa_info);
4461         kfree(bp->fp);
4462         kfree(bp->sp_objs);
4463         kfree(bp->fp_stats);
4464         kfree(bp->bnx2x_txq);
4465         kfree(bp->msix_table);
4466         kfree(bp->ilt);
4467 }
4468
4469 int bnx2x_alloc_mem_bp(struct bnx2x *bp)
4470 {
4471         struct bnx2x_fastpath *fp;
4472         struct msix_entry *tbl;
4473         struct bnx2x_ilt *ilt;
4474         int msix_table_size = 0;
4475         int fp_array_size, txq_array_size;
4476         int i;
4477
4478         /*
4479          * The biggest MSI-X table we might need is as a maximum number of fast
4480          * path IGU SBs plus default SB (for PF only).
4481          */
4482         msix_table_size = bp->igu_sb_cnt;
4483         if (IS_PF(bp))
4484                 msix_table_size++;
4485         BNX2X_DEV_INFO("msix_table_size %d\n", msix_table_size);
4486
4487         /* fp array: RSS plus CNIC related L2 queues */
4488         fp_array_size = BNX2X_MAX_RSS_COUNT(bp) + CNIC_SUPPORT(bp);
4489         bp->fp_array_size = fp_array_size;
4490         BNX2X_DEV_INFO("fp_array_size %d\n", bp->fp_array_size);
4491
4492         fp = kcalloc(bp->fp_array_size, sizeof(*fp), GFP_KERNEL);
4493         if (!fp)
4494                 goto alloc_err;
4495         for (i = 0; i < bp->fp_array_size; i++) {
4496                 fp[i].tpa_info =
4497                         kcalloc(ETH_MAX_AGGREGATION_QUEUES_E1H_E2,
4498                                 sizeof(struct bnx2x_agg_info), GFP_KERNEL);
4499                 if (!(fp[i].tpa_info))
4500                         goto alloc_err;
4501         }
4502
4503         bp->fp = fp;
4504
4505         /* allocate sp objs */
4506         bp->sp_objs = kcalloc(bp->fp_array_size, sizeof(struct bnx2x_sp_objs),
4507                               GFP_KERNEL);
4508         if (!bp->sp_objs)
4509                 goto alloc_err;
4510
4511         /* allocate fp_stats */
4512         bp->fp_stats = kcalloc(bp->fp_array_size, sizeof(struct bnx2x_fp_stats),
4513                                GFP_KERNEL);
4514         if (!bp->fp_stats)
4515                 goto alloc_err;
4516
4517         /* Allocate memory for the transmission queues array */
4518         txq_array_size =
4519                 BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS + CNIC_SUPPORT(bp);
4520         BNX2X_DEV_INFO("txq_array_size %d", txq_array_size);
4521
4522         bp->bnx2x_txq = kcalloc(txq_array_size, sizeof(struct bnx2x_fp_txdata),
4523                                 GFP_KERNEL);
4524         if (!bp->bnx2x_txq)
4525                 goto alloc_err;
4526
4527         /* msix table */
4528         tbl = kcalloc(msix_table_size, sizeof(*tbl), GFP_KERNEL);
4529         if (!tbl)
4530                 goto alloc_err;
4531         bp->msix_table = tbl;
4532
4533         /* ilt */
4534         ilt = kzalloc(sizeof(*ilt), GFP_KERNEL);
4535         if (!ilt)
4536                 goto alloc_err;
4537         bp->ilt = ilt;
4538
4539         return 0;
4540 alloc_err:
4541         bnx2x_free_mem_bp(bp);
4542         return -ENOMEM;
4543 }
4544
4545 int bnx2x_reload_if_running(struct net_device *dev)
4546 {
4547         struct bnx2x *bp = netdev_priv(dev);
4548
4549         if (unlikely(!netif_running(dev)))
4550                 return 0;
4551
4552         bnx2x_nic_unload(bp, UNLOAD_NORMAL, true);
4553         return bnx2x_nic_load(bp, LOAD_NORMAL);
4554 }
4555
4556 int bnx2x_get_cur_phy_idx(struct bnx2x *bp)
4557 {
4558         u32 sel_phy_idx = 0;
4559         if (bp->link_params.num_phys <= 1)
4560                 return INT_PHY;
4561
4562         if (bp->link_vars.link_up) {
4563                 sel_phy_idx = EXT_PHY1;
4564                 /* In case link is SERDES, check if the EXT_PHY2 is the one */
4565                 if ((bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
4566                     (bp->link_params.phy[EXT_PHY2].supported & SUPPORTED_FIBRE))
4567                         sel_phy_idx = EXT_PHY2;
4568         } else {
4569
4570                 switch (bnx2x_phy_selection(&bp->link_params)) {
4571                 case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
4572                 case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
4573                 case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
4574                        sel_phy_idx = EXT_PHY1;
4575                        break;
4576                 case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
4577                 case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
4578                        sel_phy_idx = EXT_PHY2;
4579                        break;
4580                 }
4581         }
4582
4583         return sel_phy_idx;
4584 }
4585 int bnx2x_get_link_cfg_idx(struct bnx2x *bp)
4586 {
4587         u32 sel_phy_idx = bnx2x_get_cur_phy_idx(bp);
4588         /*
4589          * The selected activated PHY is always after swapping (in case PHY
4590          * swapping is enabled). So when swapping is enabled, we need to reverse
4591          * the configuration
4592          */
4593
4594         if (bp->link_params.multi_phy_config &
4595             PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
4596                 if (sel_phy_idx == EXT_PHY1)
4597                         sel_phy_idx = EXT_PHY2;
4598                 else if (sel_phy_idx == EXT_PHY2)
4599                         sel_phy_idx = EXT_PHY1;
4600         }
4601         return LINK_CONFIG_IDX(sel_phy_idx);
4602 }
4603
4604 #ifdef NETDEV_FCOE_WWNN
4605 int bnx2x_fcoe_get_wwn(struct net_device *dev, u64 *wwn, int type)
4606 {
4607         struct bnx2x *bp = netdev_priv(dev);
4608         struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
4609
4610         switch (type) {
4611         case NETDEV_FCOE_WWNN:
4612                 *wwn = HILO_U64(cp->fcoe_wwn_node_name_hi,
4613                                 cp->fcoe_wwn_node_name_lo);
4614                 break;
4615         case NETDEV_FCOE_WWPN:
4616                 *wwn = HILO_U64(cp->fcoe_wwn_port_name_hi,
4617                                 cp->fcoe_wwn_port_name_lo);
4618                 break;
4619         default:
4620                 BNX2X_ERR("Wrong WWN type requested - %d\n", type);
4621                 return -EINVAL;
4622         }
4623
4624         return 0;
4625 }
4626 #endif
4627
4628 /* called with rtnl_lock */
4629 int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
4630 {
4631         struct bnx2x *bp = netdev_priv(dev);
4632
4633         if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
4634                 BNX2X_ERR("Can't perform change MTU during parity recovery\n");
4635                 return -EAGAIN;
4636         }
4637
4638         if ((new_mtu > ETH_MAX_JUMBO_PACKET_SIZE) ||
4639             ((new_mtu + ETH_HLEN) < ETH_MIN_PACKET_SIZE)) {
4640                 BNX2X_ERR("Can't support requested MTU size\n");
4641                 return -EINVAL;
4642         }
4643
4644         /* This does not race with packet allocation
4645          * because the actual alloc size is
4646          * only updated as part of load
4647          */
4648         dev->mtu = new_mtu;
4649
4650         return bnx2x_reload_if_running(dev);
4651 }
4652
4653 netdev_features_t bnx2x_fix_features(struct net_device *dev,
4654                                      netdev_features_t features)
4655 {
4656         struct bnx2x *bp = netdev_priv(dev);
4657
4658         /* TPA requires Rx CSUM offloading */
4659         if (!(features & NETIF_F_RXCSUM) || bp->disable_tpa) {
4660                 features &= ~NETIF_F_LRO;
4661                 features &= ~NETIF_F_GRO;
4662         }
4663
4664         return features;
4665 }
4666
4667 int bnx2x_set_features(struct net_device *dev, netdev_features_t features)
4668 {
4669         struct bnx2x *bp = netdev_priv(dev);
4670         u32 flags = bp->flags;
4671         u32 changes;
4672         bool bnx2x_reload = false;
4673
4674         if (features & NETIF_F_LRO)
4675                 flags |= TPA_ENABLE_FLAG;
4676         else
4677                 flags &= ~TPA_ENABLE_FLAG;
4678
4679         if (features & NETIF_F_GRO)
4680                 flags |= GRO_ENABLE_FLAG;
4681         else
4682                 flags &= ~GRO_ENABLE_FLAG;
4683
4684         if (features & NETIF_F_LOOPBACK) {
4685                 if (bp->link_params.loopback_mode != LOOPBACK_BMAC) {
4686                         bp->link_params.loopback_mode = LOOPBACK_BMAC;
4687                         bnx2x_reload = true;
4688                 }
4689         } else {
4690                 if (bp->link_params.loopback_mode != LOOPBACK_NONE) {
4691                         bp->link_params.loopback_mode = LOOPBACK_NONE;
4692                         bnx2x_reload = true;
4693                 }
4694         }
4695
4696         changes = flags ^ bp->flags;
4697
4698         /* if GRO is changed while LRO is enabled, don't force a reload */
4699         if ((changes & GRO_ENABLE_FLAG) && (flags & TPA_ENABLE_FLAG))
4700                 changes &= ~GRO_ENABLE_FLAG;
4701
4702         if (changes)
4703                 bnx2x_reload = true;
4704
4705         bp->flags = flags;
4706
4707         if (bnx2x_reload) {
4708                 if (bp->recovery_state == BNX2X_RECOVERY_DONE)
4709                         return bnx2x_reload_if_running(dev);
4710                 /* else: bnx2x_nic_load() will be called at end of recovery */
4711         }
4712
4713         return 0;
4714 }
4715
4716 void bnx2x_tx_timeout(struct net_device *dev)
4717 {
4718         struct bnx2x *bp = netdev_priv(dev);
4719
4720 #ifdef BNX2X_STOP_ON_ERROR
4721         if (!bp->panic)
4722                 bnx2x_panic();
4723 #endif
4724
4725         smp_mb__before_clear_bit();
4726         set_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state);
4727         smp_mb__after_clear_bit();
4728
4729         /* This allows the netif to be shutdown gracefully before resetting */
4730         schedule_delayed_work(&bp->sp_rtnl_task, 0);
4731 }
4732
4733 int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
4734 {
4735         struct net_device *dev = pci_get_drvdata(pdev);
4736         struct bnx2x *bp;
4737
4738         if (!dev) {
4739                 dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
4740                 return -ENODEV;
4741         }
4742         bp = netdev_priv(dev);
4743
4744         rtnl_lock();
4745
4746         pci_save_state(pdev);
4747
4748         if (!netif_running(dev)) {
4749                 rtnl_unlock();
4750                 return 0;
4751         }
4752
4753         netif_device_detach(dev);
4754
4755         bnx2x_nic_unload(bp, UNLOAD_CLOSE, false);
4756
4757         bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
4758
4759         rtnl_unlock();
4760
4761         return 0;
4762 }
4763
4764 int bnx2x_resume(struct pci_dev *pdev)
4765 {
4766         struct net_device *dev = pci_get_drvdata(pdev);
4767         struct bnx2x *bp;
4768         int rc;
4769
4770         if (!dev) {
4771                 dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
4772                 return -ENODEV;
4773         }
4774         bp = netdev_priv(dev);
4775
4776         if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
4777                 BNX2X_ERR("Handling parity error recovery. Try again later\n");
4778                 return -EAGAIN;
4779         }
4780
4781         rtnl_lock();
4782
4783         pci_restore_state(pdev);
4784
4785         if (!netif_running(dev)) {
4786                 rtnl_unlock();
4787                 return 0;
4788         }
4789
4790         bnx2x_set_power_state(bp, PCI_D0);
4791         netif_device_attach(dev);
4792
4793         rc = bnx2x_nic_load(bp, LOAD_OPEN);
4794
4795         rtnl_unlock();
4796
4797         return rc;
4798 }
4799
4800 void bnx2x_set_ctx_validation(struct bnx2x *bp, struct eth_context *cxt,
4801                               u32 cid)
4802 {
4803         if (!cxt) {
4804                 BNX2X_ERR("bad context pointer %p\n", cxt);
4805                 return;
4806         }
4807
4808         /* ustorm cxt validation */
4809         cxt->ustorm_ag_context.cdu_usage =
4810                 CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid),
4811                         CDU_REGION_NUMBER_UCM_AG, ETH_CONNECTION_TYPE);
4812         /* xcontext validation */
4813         cxt->xstorm_ag_context.cdu_reserved =
4814                 CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid),
4815                         CDU_REGION_NUMBER_XCM_AG, ETH_CONNECTION_TYPE);
4816 }
4817
4818 static void storm_memset_hc_timeout(struct bnx2x *bp, u8 port,
4819                                     u8 fw_sb_id, u8 sb_index,
4820                                     u8 ticks)
4821 {
4822         u32 addr = BAR_CSTRORM_INTMEM +
4823                    CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index);
4824         REG_WR8(bp, addr, ticks);
4825         DP(NETIF_MSG_IFUP,
4826            "port %x fw_sb_id %d sb_index %d ticks %d\n",
4827            port, fw_sb_id, sb_index, ticks);
4828 }
4829
4830 static void storm_memset_hc_disable(struct bnx2x *bp, u8 port,
4831                                     u16 fw_sb_id, u8 sb_index,
4832                                     u8 disable)
4833 {
4834         u32 enable_flag = disable ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
4835         u32 addr = BAR_CSTRORM_INTMEM +
4836                    CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index);
4837         u8 flags = REG_RD8(bp, addr);
4838         /* clear and set */
4839         flags &= ~HC_INDEX_DATA_HC_ENABLED;
4840         flags |= enable_flag;
4841         REG_WR8(bp, addr, flags);
4842         DP(NETIF_MSG_IFUP,
4843            "port %x fw_sb_id %d sb_index %d disable %d\n",
4844            port, fw_sb_id, sb_index, disable);
4845 }
4846
4847 void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u8 fw_sb_id,
4848                                     u8 sb_index, u8 disable, u16 usec)
4849 {
4850         int port = BP_PORT(bp);
4851         u8 ticks = usec / BNX2X_BTR;
4852
4853         storm_memset_hc_timeout(bp, port, fw_sb_id, sb_index, ticks);
4854
4855         disable = disable ? 1 : (usec ? 0 : 1);
4856         storm_memset_hc_disable(bp, port, fw_sb_id, sb_index, disable);
4857 }