]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/net/ethernet/intel/e1000e/ich8lan.h
Merge branches 'fixes', 'misc', 'mmci', 'unstable/dma-for-next' and 'sa11x0' into...
[karo-tx-linux.git] / drivers / net / ethernet / intel / e1000e / ich8lan.h
1 /*******************************************************************************
2
3   Intel PRO/1000 Linux driver
4   Copyright(c) 1999 - 2013 Intel Corporation.
5
6   This program is free software; you can redistribute it and/or modify it
7   under the terms and conditions of the GNU General Public License,
8   version 2, as published by the Free Software Foundation.
9
10   This program is distributed in the hope it will be useful, but WITHOUT
11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13   more details.
14
15   You should have received a copy of the GNU General Public License along with
16   this program; if not, write to the Free Software Foundation, Inc.,
17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19   The full GNU General Public License is included in this distribution in
20   the file called "COPYING".
21
22   Contact Information:
23   Linux NICS <linux.nics@intel.com>
24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26
27 *******************************************************************************/
28
29 #ifndef _E1000E_ICH8LAN_H_
30 #define _E1000E_ICH8LAN_H_
31
32 #define ICH_FLASH_GFPREG                0x0000
33 #define ICH_FLASH_HSFSTS                0x0004
34 #define ICH_FLASH_HSFCTL                0x0006
35 #define ICH_FLASH_FADDR                 0x0008
36 #define ICH_FLASH_FDATA0                0x0010
37 #define ICH_FLASH_PR0                   0x0074
38
39 /* Requires up to 10 seconds when MNG might be accessing part. */
40 #define ICH_FLASH_READ_COMMAND_TIMEOUT  10000000
41 #define ICH_FLASH_WRITE_COMMAND_TIMEOUT 10000000
42 #define ICH_FLASH_ERASE_COMMAND_TIMEOUT 10000000
43 #define ICH_FLASH_LINEAR_ADDR_MASK      0x00FFFFFF
44 #define ICH_FLASH_CYCLE_REPEAT_COUNT    10
45
46 #define ICH_CYCLE_READ                  0
47 #define ICH_CYCLE_WRITE                 2
48 #define ICH_CYCLE_ERASE                 3
49
50 #define FLASH_GFPREG_BASE_MASK          0x1FFF
51 #define FLASH_SECTOR_ADDR_SHIFT         12
52
53 #define ICH_FLASH_SEG_SIZE_256          256
54 #define ICH_FLASH_SEG_SIZE_4K           4096
55 #define ICH_FLASH_SEG_SIZE_8K           8192
56 #define ICH_FLASH_SEG_SIZE_64K          65536
57
58 #define E1000_ICH_FWSM_RSPCIPHY 0x00000040      /* Reset PHY on PCI Reset */
59 /* FW established a valid mode */
60 #define E1000_ICH_FWSM_FW_VALID 0x00008000
61 #define E1000_ICH_FWSM_PCIM2PCI 0x01000000      /* ME PCIm-to-PCI active */
62 #define E1000_ICH_FWSM_PCIM2PCI_COUNT   2000
63
64 #define E1000_ICH_MNG_IAMT_MODE         0x2
65
66 #define E1000_FWSM_WLOCK_MAC_MASK       0x0380
67 #define E1000_FWSM_WLOCK_MAC_SHIFT      7
68
69 /* Shared Receive Address Registers */
70 #define E1000_SHRAL_PCH_LPT(_i)         (0x05408 + ((_i) * 8))
71 #define E1000_SHRAH_PCH_LPT(_i)         (0x0540C + ((_i) * 8))
72
73 #define ID_LED_DEFAULT_ICH8LAN  ((ID_LED_DEF1_DEF2 << 12) | \
74                                  (ID_LED_OFF1_OFF2 <<  8) | \
75                                  (ID_LED_OFF1_ON2  <<  4) | \
76                                  (ID_LED_DEF1_DEF2))
77
78 #define E1000_ICH_NVM_SIG_WORD          0x13
79 #define E1000_ICH_NVM_SIG_MASK          0xC000
80 #define E1000_ICH_NVM_VALID_SIG_MASK    0xC0
81 #define E1000_ICH_NVM_SIG_VALUE         0x80
82
83 #define E1000_ICH8_LAN_INIT_TIMEOUT     1500
84
85 #define E1000_FEXTNVM_SW_CONFIG         1
86 #define E1000_FEXTNVM_SW_CONFIG_ICH8M   (1 << 27)       /* different on ICH8M */
87
88 #define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK     0x0C000000
89 #define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC   0x08000000
90
91 #define E1000_FEXTNVM4_BEACON_DURATION_MASK     0x7
92 #define E1000_FEXTNVM4_BEACON_DURATION_8USEC    0x7
93 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC   0x3
94
95 #define E1000_FEXTNVM6_REQ_PLL_CLK      0x00000100
96 #define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION        0x00000200
97
98 #define PCIE_ICH8_SNOOP_ALL     PCIE_NO_SNOOP_ALL
99
100 #define E1000_ICH_RAR_ENTRIES   7
101 #define E1000_PCH2_RAR_ENTRIES  11      /* RAR[0-6], SHRA[0-3] */
102 #define E1000_PCH_LPT_RAR_ENTRIES       12      /* RAR[0], SHRA[0-10] */
103
104 #define PHY_PAGE_SHIFT          5
105 #define PHY_REG(page, reg)      (((page) << PHY_PAGE_SHIFT) | \
106                                  ((reg) & MAX_PHY_REG_ADDRESS))
107 #define IGP3_KMRN_DIAG  PHY_REG(770, 19)        /* KMRN Diagnostic */
108 #define IGP3_VR_CTRL    PHY_REG(776, 18)        /* Voltage Regulator Control */
109
110 #define IGP3_KMRN_DIAG_PCS_LOCK_LOSS            0x0002
111 #define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK    0x0300
112 #define IGP3_VR_CTRL_MODE_SHUTDOWN              0x0200
113
114 /* PHY Wakeup Registers and defines */
115 #define BM_PORT_GEN_CFG         PHY_REG(BM_PORT_CTRL_PAGE, 17)
116 #define BM_RCTL                 PHY_REG(BM_WUC_PAGE, 0)
117 #define BM_WUC                  PHY_REG(BM_WUC_PAGE, 1)
118 #define BM_WUFC                 PHY_REG(BM_WUC_PAGE, 2)
119 #define BM_WUS                  PHY_REG(BM_WUC_PAGE, 3)
120 #define BM_RAR_L(_i)            (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
121 #define BM_RAR_M(_i)            (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
122 #define BM_RAR_H(_i)            (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
123 #define BM_RAR_CTRL(_i)         (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
124 #define BM_MTA(_i)              (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
125
126 #define BM_RCTL_UPE             0x0001  /* Unicast Promiscuous Mode */
127 #define BM_RCTL_MPE             0x0002  /* Multicast Promiscuous Mode */
128 #define BM_RCTL_MO_SHIFT        3       /* Multicast Offset Shift */
129 #define BM_RCTL_MO_MASK         (3 << 3)        /* Multicast Offset Mask */
130 #define BM_RCTL_BAM             0x0020  /* Broadcast Accept Mode */
131 #define BM_RCTL_PMCF            0x0040  /* Pass MAC Control Frames */
132 #define BM_RCTL_RFCE            0x0080  /* Rx Flow Control Enable */
133
134 #define HV_LED_CONFIG           PHY_REG(768, 30)        /* LED Configuration */
135 #define HV_MUX_DATA_CTRL        PHY_REG(776, 16)
136 #define HV_MUX_DATA_CTRL_GEN_TO_MAC     0x0400
137 #define HV_MUX_DATA_CTRL_FORCE_SPEED    0x0004
138 #define HV_STATS_PAGE   778
139 /* Half-duplex collision counts */
140 #define HV_SCC_UPPER    PHY_REG(HV_STATS_PAGE, 16)      /* Single Collision */
141 #define HV_SCC_LOWER    PHY_REG(HV_STATS_PAGE, 17)
142 #define HV_ECOL_UPPER   PHY_REG(HV_STATS_PAGE, 18)      /* Excessive Coll. */
143 #define HV_ECOL_LOWER   PHY_REG(HV_STATS_PAGE, 19)
144 #define HV_MCC_UPPER    PHY_REG(HV_STATS_PAGE, 20)      /* Multiple Collision */
145 #define HV_MCC_LOWER    PHY_REG(HV_STATS_PAGE, 21)
146 #define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23)     /* Late Collision */
147 #define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
148 #define HV_COLC_UPPER   PHY_REG(HV_STATS_PAGE, 25)      /* Collision */
149 #define HV_COLC_LOWER   PHY_REG(HV_STATS_PAGE, 26)
150 #define HV_DC_UPPER     PHY_REG(HV_STATS_PAGE, 27)      /* Defer Count */
151 #define HV_DC_LOWER     PHY_REG(HV_STATS_PAGE, 28)
152 #define HV_TNCRS_UPPER  PHY_REG(HV_STATS_PAGE, 29)      /* Tx with no CRS */
153 #define HV_TNCRS_LOWER  PHY_REG(HV_STATS_PAGE, 30)
154
155 #define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */
156
157 #define E1000_NVM_K1_CONFIG     0x1B    /* NVM K1 Config Word */
158 #define E1000_NVM_K1_ENABLE     0x1     /* NVM Enable K1 bit */
159
160 /* SMBus Control Phy Register */
161 #define CV_SMB_CTRL             PHY_REG(769, 23)
162 #define CV_SMB_CTRL_FORCE_SMBUS 0x0001
163
164 /* SMBus Address Phy Register */
165 #define HV_SMB_ADDR             PHY_REG(768, 26)
166 #define HV_SMB_ADDR_MASK        0x007F
167 #define HV_SMB_ADDR_PEC_EN      0x0200
168 #define HV_SMB_ADDR_VALID       0x0080
169 #define HV_SMB_ADDR_FREQ_MASK           0x1100
170 #define HV_SMB_ADDR_FREQ_LOW_SHIFT      8
171 #define HV_SMB_ADDR_FREQ_HIGH_SHIFT     12
172
173 /* Strapping Option Register - RO */
174 #define E1000_STRAP                     0x0000C
175 #define E1000_STRAP_SMBUS_ADDRESS_MASK  0x00FE0000
176 #define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
177 #define E1000_STRAP_SMT_FREQ_MASK       0x00003000
178 #define E1000_STRAP_SMT_FREQ_SHIFT      12
179
180 /* OEM Bits Phy Register */
181 #define HV_OEM_BITS             PHY_REG(768, 25)
182 #define HV_OEM_BITS_LPLU        0x0004  /* Low Power Link Up */
183 #define HV_OEM_BITS_GBE_DIS     0x0040  /* Gigabit Disable */
184 #define HV_OEM_BITS_RESTART_AN  0x0400  /* Restart Auto-negotiation */
185
186 /* KMRN Mode Control */
187 #define HV_KMRN_MODE_CTRL       PHY_REG(769, 16)
188 #define HV_KMRN_MDIO_SLOW       0x0400
189
190 /* KMRN FIFO Control and Status */
191 #define HV_KMRN_FIFO_CTRLSTA                    PHY_REG(770, 16)
192 #define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK      0x7000
193 #define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT     12
194
195 /* PHY Power Management Control */
196 #define HV_PM_CTRL              PHY_REG(770, 17)
197 #define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA  0x100
198
199 #define SW_FLAG_TIMEOUT         1000    /* SW Semaphore flag timeout in ms */
200
201 /* Inband Control */
202 #define I217_INBAND_CTRL                                PHY_REG(770, 18)
203 #define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK      0x3F00
204 #define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT     8
205
206 /* PHY Low Power Idle Control */
207 #define I82579_LPI_CTRL                         PHY_REG(772, 20)
208 #define I82579_LPI_CTRL_100_ENABLE              0x2000
209 #define I82579_LPI_CTRL_1000_ENABLE             0x4000
210 #define I82579_LPI_CTRL_ENABLE_MASK             0x6000
211 #define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT    0x80
212
213 /* Extended Management Interface (EMI) Registers */
214 #define I82579_EMI_ADDR         0x10
215 #define I82579_EMI_DATA         0x11
216 #define I82579_LPI_UPDATE_TIMER 0x4805  /* in 40ns units + 40 ns base value */
217 #define I82579_MSE_THRESHOLD    0x084F  /* 82579 Mean Square Error Threshold */
218 #define I82577_MSE_THRESHOLD    0x0887  /* 82577 Mean Square Error Threshold */
219 #define I82579_MSE_LINK_DOWN    0x2411  /* MSE count before dropping link */
220 #define I82579_RX_CONFIG                0x3412  /* Receive configuration */
221 #define I82579_EEE_PCS_STATUS           0x182E  /* IEEE MMD Register 3.1 >> 8 */
222 #define I82579_EEE_CAPABILITY           0x0410  /* IEEE MMD Register 3.20 */
223 #define I82579_EEE_ADVERTISEMENT        0x040E  /* IEEE MMD Register 7.60 */
224 #define I82579_EEE_LP_ABILITY           0x040F  /* IEEE MMD Register 7.61 */
225 #define I82579_EEE_100_SUPPORTED        (1 << 1)        /* 100BaseTx EEE */
226 #define I82579_EEE_1000_SUPPORTED       (1 << 2)        /* 1000BaseTx EEE */
227 #define I217_EEE_PCS_STATUS     0x9401  /* IEEE MMD Register 3.1 */
228 #define I217_EEE_CAPABILITY     0x8000  /* IEEE MMD Register 3.20 */
229 #define I217_EEE_ADVERTISEMENT  0x8001  /* IEEE MMD Register 7.60 */
230 #define I217_EEE_LP_ABILITY     0x8002  /* IEEE MMD Register 7.61 */
231
232 #define E1000_EEE_RX_LPI_RCVD   0x0400  /* Tx LP idle received */
233 #define E1000_EEE_TX_LPI_RCVD   0x0800  /* Rx LP idle received */
234
235 /* Intel Rapid Start Technology Support */
236 #define I217_PROXY_CTRL         BM_PHY_REG(BM_WUC_PAGE, 70)
237 #define I217_PROXY_CTRL_AUTO_DISABLE    0x0080
238 #define I217_SxCTRL                     PHY_REG(BM_PORT_CTRL_PAGE, 28)
239 #define I217_SxCTRL_ENABLE_LPI_RESET    0x1000
240 #define I217_CGFREG                     PHY_REG(772, 29)
241 #define I217_CGFREG_ENABLE_MTA_RESET    0x0002
242 #define I217_MEMPWR                     PHY_REG(772, 26)
243 #define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010
244
245 /* Receive Address Initial CRC Calculation */
246 #define E1000_PCH_RAICC(_n)     (0x05F50 + ((_n) * 4))
247
248 /* Latency Tolerance Reporting */
249 #define E1000_LTRV                      0x000F8
250 #define E1000_LTRV_SCALE_MAX            5
251 #define E1000_LTRV_SCALE_FACTOR         5
252 #define E1000_LTRV_REQ_SHIFT            15
253 #define E1000_LTRV_NOSNOOP_SHIFT        16
254 #define E1000_LTRV_SEND                 (1 << 30)
255
256 /* Proprietary Latency Tolerance Reporting PCI Capability */
257 #define E1000_PCI_LTR_CAP_LPT           0xA8
258
259 void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
260 void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
261                                                   bool state);
262 void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
263 void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
264 void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
265 void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
266 s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
267 void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
268 s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
269 s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
270 s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data);
271 #endif /* _E1000E_ICH8LAN_H_ */