1 /*********************************************************************
3 * Description: Driver for the SMC Infrared Communications Controller
4 * Status: Experimental.
5 * Author: Daniele Peri (peri@csai.unipa.it)
10 * Copyright (c) 2002 Daniele Peri
11 * All Rights Reserved.
12 * Copyright (c) 2002 Jean Tourrilhes
13 * Copyright (c) 2006 Linus Walleij
16 * Based on smc-ircc.c:
18 * Copyright (c) 2001 Stefani Seibold
19 * Copyright (c) 1999-2001 Dag Brattli
20 * Copyright (c) 1998-1999 Thomas Davis,
24 * Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved.
27 * This program is free software; you can redistribute it and/or
28 * modify it under the terms of the GNU General Public License as
29 * published by the Free Software Foundation; either version 2 of
30 * the License, or (at your option) any later version.
32 * This program is distributed in the hope that it will be useful,
33 * but WITHOUT ANY WARRANTY; without even the implied warranty of
34 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
35 * GNU General Public License for more details.
37 * You should have received a copy of the GNU General Public License
38 * along with this program; if not, write to the Free Software
39 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
42 ********************************************************************/
44 #include <linux/module.h>
45 #include <linux/kernel.h>
46 #include <linux/types.h>
47 #include <linux/skbuff.h>
48 #include <linux/netdevice.h>
49 #include <linux/ioport.h>
50 #include <linux/delay.h>
51 #include <linux/init.h>
52 #include <linux/interrupt.h>
53 #include <linux/rtnetlink.h>
54 #include <linux/serial_reg.h>
55 #include <linux/dma-mapping.h>
56 #include <linux/pnp.h>
57 #include <linux/platform_device.h>
58 #include <linux/gfp.h>
62 #include <asm/byteorder.h>
64 #include <linux/spinlock.h>
67 #include <linux/pci.h>
70 #include <net/irda/wrapper.h>
71 #include <net/irda/irda.h>
72 #include <net/irda/irda_device.h>
74 #include "smsc-ircc2.h"
78 MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>");
79 MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
80 MODULE_LICENSE("GPL");
82 static int smsc_nopnp = 1;
83 module_param_named(nopnp, smsc_nopnp, bool, 0);
84 MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings, defaults to true");
87 static int ircc_dma = DMA_INVAL;
88 module_param(ircc_dma, int, 0);
89 MODULE_PARM_DESC(ircc_dma, "DMA channel");
92 static int ircc_irq = IRQ_INVAL;
93 module_param(ircc_irq, int, 0);
94 MODULE_PARM_DESC(ircc_irq, "IRQ line");
97 module_param(ircc_fir, int, 0);
98 MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
101 module_param(ircc_sir, int, 0);
102 MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
105 module_param(ircc_cfg, int, 0);
106 MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
108 static int ircc_transceiver;
109 module_param(ircc_transceiver, int, 0);
110 MODULE_PARM_DESC(ircc_transceiver, "Transceiver type");
115 struct smsc_ircc_subsystem_configuration {
116 unsigned short vendor; /* PCI vendor ID */
117 unsigned short device; /* PCI vendor ID */
118 unsigned short subvendor; /* PCI subsystem vendor ID */
119 unsigned short subdevice; /* PCI subsystem device ID */
120 unsigned short sir_io; /* I/O port for SIR */
121 unsigned short fir_io; /* I/O port for FIR */
122 unsigned char fir_irq; /* FIR IRQ */
123 unsigned char fir_dma; /* FIR DMA */
124 unsigned short cfg_base; /* I/O port for chip configuration */
125 int (*preconfigure)(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); /* Preconfig function */
126 const char *name; /* name shown as info */
130 struct smsc_transceiver {
132 void (*set_for_speed)(int fir_base, u32 speed);
133 int (*probe)(int fir_base);
146 struct smsc_chip_address {
147 unsigned int cfg_base;
151 /* Private data for each instance */
152 struct smsc_ircc_cb {
153 struct net_device *netdev; /* Yes! we are some kind of netdevice */
154 struct irlap_cb *irlap; /* The link layer we are binded to */
156 chipio_t io; /* IrDA controller information */
157 iobuff_t tx_buff; /* Transmit buffer */
158 iobuff_t rx_buff; /* Receive buffer */
159 dma_addr_t tx_buff_dma;
160 dma_addr_t rx_buff_dma;
162 struct qos_info qos; /* QoS capabilities for this device */
164 spinlock_t lock; /* For serializing operations */
167 __u32 flags; /* Interface flags */
169 int tx_buff_offsets[10]; /* Offsets between frames in tx_buff */
170 int tx_len; /* Number of frames in tx_buff */
173 struct platform_device *pldev;
178 #define SMSC_IRCC2_DRIVER_NAME "smsc-ircc2"
180 #define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED 9600
181 #define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER 1
182 #define SMSC_IRCC2_C_NET_TIMEOUT 0
183 #define SMSC_IRCC2_C_SIR_STOP 0
185 static const char *driver_name = SMSC_IRCC2_DRIVER_NAME;
189 static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq);
190 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base);
191 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq);
192 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self);
193 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self);
194 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self);
195 static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self);
196 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self);
197 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self);
198 static netdev_tx_t smsc_ircc_hard_xmit_sir(struct sk_buff *skb,
199 struct net_device *dev);
200 static netdev_tx_t smsc_ircc_hard_xmit_fir(struct sk_buff *skb,
201 struct net_device *dev);
202 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs);
203 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self);
204 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed);
205 static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, u32 speed);
206 static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id);
207 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev);
208 static void smsc_ircc_sir_start(struct smsc_ircc_cb *self);
209 #if SMSC_IRCC2_C_SIR_STOP
210 static void smsc_ircc_sir_stop(struct smsc_ircc_cb *self);
212 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self);
213 static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
214 static int smsc_ircc_net_open(struct net_device *dev);
215 static int smsc_ircc_net_close(struct net_device *dev);
216 static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
217 #if SMSC_IRCC2_C_NET_TIMEOUT
218 static void smsc_ircc_timeout(struct net_device *dev);
220 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self);
221 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self);
222 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed);
223 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self);
226 static int __init smsc_ircc_look_for_chips(void);
227 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
228 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
229 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
230 static int __init smsc_superio_fdc(unsigned short cfg_base);
231 static int __init smsc_superio_lpc(unsigned short cfg_base);
233 static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
234 static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
235 static void __init preconfigure_ali_port(struct pci_dev *dev,
236 unsigned short port);
237 static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
238 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
239 unsigned short ircc_fir,
240 unsigned short ircc_sir,
241 unsigned char ircc_dma,
242 unsigned char ircc_irq);
245 /* Transceivers specific functions */
247 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed);
248 static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base);
249 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed);
250 static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base);
251 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed);
252 static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base);
254 /* Power Management */
256 static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state);
257 static int smsc_ircc_resume(struct platform_device *dev);
259 static struct platform_driver smsc_ircc_driver = {
260 .suspend = smsc_ircc_suspend,
261 .resume = smsc_ircc_resume,
263 .name = SMSC_IRCC2_DRIVER_NAME,
267 /* Transceivers for SMSC-ircc */
269 static struct smsc_transceiver smsc_transceivers[] =
271 { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 },
272 { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select },
273 { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc },
276 #define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (ARRAY_SIZE(smsc_transceivers) - 1)
278 /* SMC SuperIO chipsets definitions */
280 #define KEY55_1 0 /* SuperIO Configuration mode with Key <0x55> */
281 #define KEY55_2 1 /* SuperIO Configuration mode with Key <0x55,0x55> */
282 #define NoIRDA 2 /* SuperIO Chip has no IRDA Port */
283 #define SIR 0 /* SuperIO Chip has only slow IRDA */
284 #define FIR 4 /* SuperIO Chip has fast IRDA */
285 #define SERx4 8 /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */
287 static struct smsc_chip __initdata fdc_chips_flat[] =
289 /* Base address 0x3f0 or 0x370 */
290 { "37C44", KEY55_1|NoIRDA, 0x00, 0x00 }, /* This chip cannot be detected */
291 { "37C665GT", KEY55_2|NoIRDA, 0x65, 0x01 },
292 { "37C665GT", KEY55_2|NoIRDA, 0x66, 0x01 },
293 { "37C669", KEY55_2|SIR|SERx4, 0x03, 0x02 },
294 { "37C669", KEY55_2|SIR|SERx4, 0x04, 0x02 }, /* ID? */
295 { "37C78", KEY55_2|NoIRDA, 0x78, 0x00 },
296 { "37N769", KEY55_1|FIR|SERx4, 0x28, 0x00 },
297 { "37N869", KEY55_1|FIR|SERx4, 0x29, 0x00 },
301 static struct smsc_chip __initdata fdc_chips_paged[] =
303 /* Base address 0x3f0 or 0x370 */
304 { "37B72X", KEY55_1|SIR|SERx4, 0x4c, 0x00 },
305 { "37B77X", KEY55_1|SIR|SERx4, 0x43, 0x00 },
306 { "37B78X", KEY55_1|SIR|SERx4, 0x44, 0x00 },
307 { "37B80X", KEY55_1|SIR|SERx4, 0x42, 0x00 },
308 { "37C67X", KEY55_1|FIR|SERx4, 0x40, 0x00 },
309 { "37C93X", KEY55_2|SIR|SERx4, 0x02, 0x01 },
310 { "37C93XAPM", KEY55_1|SIR|SERx4, 0x30, 0x01 },
311 { "37C93XFR", KEY55_2|FIR|SERx4, 0x03, 0x01 },
312 { "37M707", KEY55_1|SIR|SERx4, 0x42, 0x00 },
313 { "37M81X", KEY55_1|SIR|SERx4, 0x4d, 0x00 },
314 { "37N958FR", KEY55_1|FIR|SERx4, 0x09, 0x04 },
315 { "37N971", KEY55_1|FIR|SERx4, 0x0a, 0x00 },
316 { "37N972", KEY55_1|FIR|SERx4, 0x0b, 0x00 },
320 static struct smsc_chip __initdata lpc_chips_flat[] =
322 /* Base address 0x2E or 0x4E */
323 { "47N227", KEY55_1|FIR|SERx4, 0x5a, 0x00 },
324 { "47N227", KEY55_1|FIR|SERx4, 0x7a, 0x00 },
325 { "47N267", KEY55_1|FIR|SERx4, 0x5e, 0x00 },
329 static struct smsc_chip __initdata lpc_chips_paged[] =
331 /* Base address 0x2E or 0x4E */
332 { "47B27X", KEY55_1|SIR|SERx4, 0x51, 0x00 },
333 { "47B37X", KEY55_1|SIR|SERx4, 0x52, 0x00 },
334 { "47M10X", KEY55_1|SIR|SERx4, 0x59, 0x00 },
335 { "47M120", KEY55_1|NoIRDA|SERx4, 0x5c, 0x00 },
336 { "47M13X", KEY55_1|SIR|SERx4, 0x59, 0x00 },
337 { "47M14X", KEY55_1|SIR|SERx4, 0x5f, 0x00 },
338 { "47N252", KEY55_1|FIR|SERx4, 0x0e, 0x00 },
339 { "47S42X", KEY55_1|SIR|SERx4, 0x57, 0x00 },
343 #define SMSCSIO_TYPE_FDC 1
344 #define SMSCSIO_TYPE_LPC 2
345 #define SMSCSIO_TYPE_FLAT 4
346 #define SMSCSIO_TYPE_PAGED 8
348 static struct smsc_chip_address __initdata possible_addresses[] =
350 { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
351 { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
352 { 0xe0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
353 { 0x2e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
354 { 0x4e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
360 static struct smsc_ircc_cb *dev_self[] = { NULL, NULL };
361 static unsigned short dev_count;
363 static inline void register_bank(int iobase, int bank)
365 outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)),
366 iobase + IRCC_MASTER);
369 /* PNP hotplug support */
370 static const struct pnp_device_id smsc_ircc_pnp_table[] = {
371 { .id = "SMCf010", .driver_data = 0 },
372 /* and presumably others */
375 MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table);
377 static int pnp_driver_registered;
380 static int __devinit smsc_ircc_pnp_probe(struct pnp_dev *dev,
381 const struct pnp_device_id *dev_id)
383 unsigned int firbase, sirbase;
386 if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
387 pnp_dma_valid(dev, 0) && pnp_irq_valid(dev, 0)))
390 sirbase = pnp_port_start(dev, 0);
391 firbase = pnp_port_start(dev, 1);
392 dma = pnp_dma(dev, 0);
393 irq = pnp_irq(dev, 0);
395 if (smsc_ircc_open(firbase, sirbase, dma, irq))
401 static struct pnp_driver smsc_ircc_pnp_driver = {
402 .name = "smsc-ircc2",
403 .id_table = smsc_ircc_pnp_table,
404 .probe = smsc_ircc_pnp_probe,
406 #else /* CONFIG_PNP */
407 static struct pnp_driver smsc_ircc_pnp_driver;
410 /*******************************************************************************
416 *******************************************************************************/
418 static int __init smsc_ircc_legacy_probe(void)
423 if (smsc_ircc_preconfigure_subsystems(ircc_cfg, ircc_fir, ircc_sir, ircc_dma, ircc_irq) < 0) {
424 /* Ignore errors from preconfiguration */
425 IRDA_ERROR("%s, Preconfiguration failed !\n", driver_name);
429 if (ircc_fir > 0 && ircc_sir > 0) {
430 IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir);
431 IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir);
433 if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq))
438 /* try user provided configuration register base address */
440 IRDA_MESSAGE(" Overriding configuration address "
441 "0x%04x\n", ircc_cfg);
442 if (!smsc_superio_fdc(ircc_cfg))
444 if (!smsc_superio_lpc(ircc_cfg))
448 if (smsc_ircc_look_for_chips() > 0)
455 * Function smsc_ircc_init ()
457 * Initialize chip. Just try to find out how many chips we are dealing with
460 static int __init smsc_ircc_init(void)
464 IRDA_DEBUG(1, "%s\n", __func__);
466 ret = platform_driver_register(&smsc_ircc_driver);
468 IRDA_ERROR("%s, Can't register driver!\n", driver_name);
474 if (smsc_nopnp || !pnp_platform_devices ||
475 ircc_cfg || ircc_fir || ircc_sir ||
476 ircc_dma != DMA_INVAL || ircc_irq != IRQ_INVAL) {
477 ret = smsc_ircc_legacy_probe();
479 if (pnp_register_driver(&smsc_ircc_pnp_driver) == 0)
480 pnp_driver_registered = 1;
484 if (pnp_driver_registered)
485 pnp_unregister_driver(&smsc_ircc_pnp_driver);
486 platform_driver_unregister(&smsc_ircc_driver);
492 static netdev_tx_t smsc_ircc_net_xmit(struct sk_buff *skb,
493 struct net_device *dev)
495 struct smsc_ircc_cb *self = netdev_priv(dev);
497 if (self->io.speed > 115200)
498 return smsc_ircc_hard_xmit_fir(skb, dev);
500 return smsc_ircc_hard_xmit_sir(skb, dev);
503 static const struct net_device_ops smsc_ircc_netdev_ops = {
504 .ndo_open = smsc_ircc_net_open,
505 .ndo_stop = smsc_ircc_net_close,
506 .ndo_do_ioctl = smsc_ircc_net_ioctl,
507 .ndo_start_xmit = smsc_ircc_net_xmit,
508 #if SMSC_IRCC2_C_NET_TIMEOUT
509 .ndo_tx_timeout = smsc_ircc_timeout,
514 * Function smsc_ircc_open (firbase, sirbase, dma, irq)
516 * Try to open driver instance
519 static int __devinit smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
521 struct smsc_ircc_cb *self;
522 struct net_device *dev;
525 IRDA_DEBUG(1, "%s\n", __func__);
527 err = smsc_ircc_present(fir_base, sir_base);
532 if (dev_count >= ARRAY_SIZE(dev_self)) {
533 IRDA_WARNING("%s(), too many devices!\n", __func__);
538 * Allocate new instance of the driver
540 dev = alloc_irdadev(sizeof(struct smsc_ircc_cb));
542 IRDA_WARNING("%s() can't allocate net device\n", __func__);
546 #if SMSC_IRCC2_C_NET_TIMEOUT
547 dev->watchdog_timeo = HZ * 2; /* Allow enough time for speed change */
549 dev->netdev_ops = &smsc_ircc_netdev_ops;
551 self = netdev_priv(dev);
554 /* Make ifconfig display some details */
555 dev->base_addr = self->io.fir_base = fir_base;
556 dev->irq = self->io.irq = irq;
558 /* Need to store self somewhere */
559 dev_self[dev_count] = self;
560 spin_lock_init(&self->lock);
562 self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE;
563 self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE;
566 dma_alloc_coherent(NULL, self->rx_buff.truesize,
567 &self->rx_buff_dma, GFP_KERNEL);
568 if (self->rx_buff.head == NULL) {
569 IRDA_ERROR("%s, Can't allocate memory for receive buffer!\n",
575 dma_alloc_coherent(NULL, self->tx_buff.truesize,
576 &self->tx_buff_dma, GFP_KERNEL);
577 if (self->tx_buff.head == NULL) {
578 IRDA_ERROR("%s, Can't allocate memory for transmit buffer!\n",
583 memset(self->rx_buff.head, 0, self->rx_buff.truesize);
584 memset(self->tx_buff.head, 0, self->tx_buff.truesize);
586 self->rx_buff.in_frame = FALSE;
587 self->rx_buff.state = OUTSIDE_FRAME;
588 self->tx_buff.data = self->tx_buff.head;
589 self->rx_buff.data = self->rx_buff.head;
591 smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq);
592 smsc_ircc_setup_qos(self);
593 smsc_ircc_init_chip(self);
595 if (ircc_transceiver > 0 &&
596 ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS)
597 self->transceiver = ircc_transceiver;
599 smsc_ircc_probe_transceiver(self);
601 err = register_netdev(self->netdev);
603 IRDA_ERROR("%s, Network device registration failed!\n",
608 self->pldev = platform_device_register_simple(SMSC_IRCC2_DRIVER_NAME,
610 if (IS_ERR(self->pldev)) {
611 err = PTR_ERR(self->pldev);
614 platform_set_drvdata(self->pldev, self);
616 IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
622 unregister_netdev(self->netdev);
625 dma_free_coherent(NULL, self->tx_buff.truesize,
626 self->tx_buff.head, self->tx_buff_dma);
628 dma_free_coherent(NULL, self->rx_buff.truesize,
629 self->rx_buff.head, self->rx_buff_dma);
631 free_netdev(self->netdev);
632 dev_self[dev_count] = NULL;
634 release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
635 release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
641 * Function smsc_ircc_present(fir_base, sir_base)
643 * Check the smsc-ircc chip presence
646 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
648 unsigned char low, high, chip, config, dma, irq, version;
650 if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT,
652 IRDA_WARNING("%s: can't get fir_base of 0x%03x\n",
657 if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT,
659 IRDA_WARNING("%s: can't get sir_base of 0x%03x\n",
664 register_bank(fir_base, 3);
666 high = inb(fir_base + IRCC_ID_HIGH);
667 low = inb(fir_base + IRCC_ID_LOW);
668 chip = inb(fir_base + IRCC_CHIP_ID);
669 version = inb(fir_base + IRCC_VERSION);
670 config = inb(fir_base + IRCC_INTERFACE);
671 dma = config & IRCC_INTERFACE_DMA_MASK;
672 irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
674 if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
675 IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
679 IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, "
680 "firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n",
681 chip & 0x0f, version, fir_base, sir_base, dma, irq);
686 release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
688 release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
694 * Function smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq)
699 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self,
700 unsigned int fir_base, unsigned int sir_base,
703 unsigned char config, chip_dma, chip_irq;
705 register_bank(fir_base, 3);
706 config = inb(fir_base + IRCC_INTERFACE);
707 chip_dma = config & IRCC_INTERFACE_DMA_MASK;
708 chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
710 self->io.fir_base = fir_base;
711 self->io.sir_base = sir_base;
712 self->io.fir_ext = SMSC_IRCC2_FIR_CHIP_IO_EXTENT;
713 self->io.sir_ext = SMSC_IRCC2_SIR_CHIP_IO_EXTENT;
714 self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE;
715 self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED;
717 if (irq != IRQ_INVAL) {
719 IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n",
720 driver_name, chip_irq, irq);
723 self->io.irq = chip_irq;
725 if (dma != DMA_INVAL) {
727 IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n",
728 driver_name, chip_dma, dma);
731 self->io.dma = chip_dma;
736 * Function smsc_ircc_setup_qos(self)
741 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self)
743 /* Initialize QoS for this device */
744 irda_init_max_qos_capabilies(&self->qos);
746 self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
747 IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
749 self->qos.min_turn_time.bits = SMSC_IRCC2_MIN_TURN_TIME;
750 self->qos.window_size.bits = SMSC_IRCC2_WINDOW_SIZE;
751 irda_qos_bits_to_value(&self->qos);
755 * Function smsc_ircc_init_chip(self)
760 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self)
762 int iobase = self->io.fir_base;
764 register_bank(iobase, 0);
765 outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
766 outb(0x00, iobase + IRCC_MASTER);
768 register_bank(iobase, 1);
769 outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | IRCC_CFGA_IRDA_SIR_A),
770 iobase + IRCC_SCE_CFGA);
772 #ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */
773 outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
774 iobase + IRCC_SCE_CFGB);
776 outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
777 iobase + IRCC_SCE_CFGB);
779 (void) inb(iobase + IRCC_FIFO_THRESHOLD);
780 outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD);
782 register_bank(iobase, 4);
783 outb((inb(iobase + IRCC_CONTROL) & 0x30), iobase + IRCC_CONTROL);
785 register_bank(iobase, 0);
786 outb(0, iobase + IRCC_LCR_A);
788 smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
790 /* Power on device */
791 outb(0x00, iobase + IRCC_MASTER);
795 * Function smsc_ircc_net_ioctl (dev, rq, cmd)
797 * Process IOCTL commands for this device
800 static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
802 struct if_irda_req *irq = (struct if_irda_req *) rq;
803 struct smsc_ircc_cb *self;
807 IRDA_ASSERT(dev != NULL, return -1;);
809 self = netdev_priv(dev);
811 IRDA_ASSERT(self != NULL, return -1;);
813 IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
816 case SIOCSBANDWIDTH: /* Set bandwidth */
817 if (!capable(CAP_NET_ADMIN))
820 /* Make sure we are the only one touching
821 * self->io.speed and the hardware - Jean II */
822 spin_lock_irqsave(&self->lock, flags);
823 smsc_ircc_change_speed(self, irq->ifr_baudrate);
824 spin_unlock_irqrestore(&self->lock, flags);
827 case SIOCSMEDIABUSY: /* Set media busy */
828 if (!capable(CAP_NET_ADMIN)) {
833 irda_device_set_media_busy(self->netdev, TRUE);
835 case SIOCGRECEIVING: /* Check if we are receiving right now */
836 irq->ifr_receiving = smsc_ircc_is_receiving(self);
840 if (!capable(CAP_NET_ADMIN)) {
844 smsc_ircc_sir_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
854 #if SMSC_IRCC2_C_NET_TIMEOUT
856 * Function smsc_ircc_timeout (struct net_device *dev)
858 * The networking timeout management.
862 static void smsc_ircc_timeout(struct net_device *dev)
864 struct smsc_ircc_cb *self = netdev_priv(dev);
867 IRDA_WARNING("%s: transmit timed out, changing speed to: %d\n",
868 dev->name, self->io.speed);
869 spin_lock_irqsave(&self->lock, flags);
870 smsc_ircc_sir_start(self);
871 smsc_ircc_change_speed(self, self->io.speed);
872 dev->trans_start = jiffies; /* prevent tx timeout */
873 netif_wake_queue(dev);
874 spin_unlock_irqrestore(&self->lock, flags);
879 * Function smsc_ircc_hard_xmit_sir (struct sk_buff *skb, struct net_device *dev)
881 * Transmits the current frame until FIFO is full, then
882 * waits until the next transmit interrupt, and continues until the
883 * frame is transmitted.
885 static netdev_tx_t smsc_ircc_hard_xmit_sir(struct sk_buff *skb,
886 struct net_device *dev)
888 struct smsc_ircc_cb *self;
892 IRDA_DEBUG(1, "%s\n", __func__);
894 IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
896 self = netdev_priv(dev);
897 IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;);
899 netif_stop_queue(dev);
901 /* Make sure test of self->io.speed & speed change are atomic */
902 spin_lock_irqsave(&self->lock, flags);
904 /* Check if we need to change the speed */
905 speed = irda_get_next_speed(skb);
906 if (speed != self->io.speed && speed != -1) {
907 /* Check for empty frame */
910 * We send frames one by one in SIR mode (no
911 * pipelining), so at this point, if we were sending
912 * a previous frame, we just received the interrupt
913 * telling us it is finished (UART_IIR_THRI).
914 * Therefore, waiting for the transmitter to really
915 * finish draining the fifo won't take too long.
916 * And the interrupt handler is not expected to run.
918 smsc_ircc_sir_wait_hw_transmitter_finish(self);
919 smsc_ircc_change_speed(self, speed);
920 spin_unlock_irqrestore(&self->lock, flags);
924 self->new_speed = speed;
928 self->tx_buff.data = self->tx_buff.head;
930 /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
931 self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
932 self->tx_buff.truesize);
934 dev->stats.tx_bytes += self->tx_buff.len;
936 /* Turn on transmit finished interrupt. Will fire immediately! */
937 outb(UART_IER_THRI, self->io.sir_base + UART_IER);
939 spin_unlock_irqrestore(&self->lock, flags);
947 * Function smsc_ircc_set_fir_speed (self, baud)
949 * Change the speed of the device
952 static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed)
954 int fir_base, ir_mode, ctrl, fast;
956 IRDA_ASSERT(self != NULL, return;);
957 fir_base = self->io.fir_base;
959 self->io.speed = speed;
964 ir_mode = IRCC_CFGA_IRDA_HDLC;
967 IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
970 ir_mode = IRCC_CFGA_IRDA_HDLC;
971 ctrl = IRCC_1152 | IRCC_CRC;
972 fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
973 IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
977 ir_mode = IRCC_CFGA_IRDA_4PPM;
979 fast = IRCC_LCR_A_FAST;
980 IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
986 /* This causes an interrupt */
987 register_bank(fir_base, 0);
988 outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast, fir_base + IRCC_LCR_A);
991 register_bank(fir_base, 1);
992 outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA);
994 register_bank(fir_base, 4);
995 outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL);
999 * Function smsc_ircc_fir_start(self)
1001 * Change the speed of the device
1004 static void smsc_ircc_fir_start(struct smsc_ircc_cb *self)
1006 struct net_device *dev;
1009 IRDA_DEBUG(1, "%s\n", __func__);
1011 IRDA_ASSERT(self != NULL, return;);
1013 IRDA_ASSERT(dev != NULL, return;);
1015 fir_base = self->io.fir_base;
1017 /* Reset everything */
1020 outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A);
1022 /* Enable interrupt */
1023 /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/
1025 register_bank(fir_base, 1);
1027 /* Select the TX/RX interface */
1028 #ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */
1029 outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
1030 fir_base + IRCC_SCE_CFGB);
1032 outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
1033 fir_base + IRCC_SCE_CFGB);
1035 (void) inb(fir_base + IRCC_FIFO_THRESHOLD);
1037 /* Enable SCE interrupts */
1038 outb(0, fir_base + IRCC_MASTER);
1039 register_bank(fir_base, 0);
1040 outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER);
1041 outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER);
1045 * Function smsc_ircc_fir_stop(self, baud)
1047 * Change the speed of the device
1050 static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self)
1054 IRDA_DEBUG(1, "%s\n", __func__);
1056 IRDA_ASSERT(self != NULL, return;);
1058 fir_base = self->io.fir_base;
1059 register_bank(fir_base, 0);
1060 /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/
1061 outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B);
1066 * Function smsc_ircc_change_speed(self, baud)
1068 * Change the speed of the device
1070 * This function *must* be called with spinlock held, because it may
1071 * be called from the irq handler. - Jean II
1073 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed)
1075 struct net_device *dev;
1076 int last_speed_was_sir;
1078 IRDA_DEBUG(0, "%s() changing speed to: %d\n", __func__, speed);
1080 IRDA_ASSERT(self != NULL, return;);
1083 last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED;
1088 self->io.speed = speed;
1089 last_speed_was_sir = 0;
1090 smsc_ircc_fir_start(self);
1093 if (self->io.speed == 0)
1094 smsc_ircc_sir_start(self);
1097 if (!last_speed_was_sir) speed = self->io.speed;
1100 if (self->io.speed != speed)
1101 smsc_ircc_set_transceiver_for_speed(self, speed);
1103 self->io.speed = speed;
1105 if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1106 if (!last_speed_was_sir) {
1107 smsc_ircc_fir_stop(self);
1108 smsc_ircc_sir_start(self);
1110 smsc_ircc_set_sir_speed(self, speed);
1112 if (last_speed_was_sir) {
1113 #if SMSC_IRCC2_C_SIR_STOP
1114 smsc_ircc_sir_stop(self);
1116 smsc_ircc_fir_start(self);
1118 smsc_ircc_set_fir_speed(self, speed);
1121 self->tx_buff.len = 10;
1122 self->tx_buff.data = self->tx_buff.head;
1124 smsc_ircc_dma_xmit(self, 4000);
1126 /* Be ready for incoming frames */
1127 smsc_ircc_dma_receive(self);
1130 netif_wake_queue(dev);
1134 * Function smsc_ircc_set_sir_speed (self, speed)
1136 * Set speed of IrDA port to specified baudrate
1139 static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
1142 int fcr; /* FIFO control reg */
1143 int lcr; /* Line control reg */
1146 IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __func__, speed);
1148 IRDA_ASSERT(self != NULL, return;);
1149 iobase = self->io.sir_base;
1151 /* Update accounting for new speed */
1152 self->io.speed = speed;
1154 /* Turn off interrupts */
1155 outb(0, iobase + UART_IER);
1157 divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed;
1159 fcr = UART_FCR_ENABLE_FIFO;
1162 * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
1163 * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
1164 * about this timeout since it will always be fast enough.
1166 fcr |= self->io.speed < 38400 ?
1167 UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
1169 /* IrDA ports use 8N1 */
1170 lcr = UART_LCR_WLEN8;
1172 outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */
1173 outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */
1174 outb(divisor >> 8, iobase + UART_DLM);
1175 outb(lcr, iobase + UART_LCR); /* Set 8N1 */
1176 outb(fcr, iobase + UART_FCR); /* Enable FIFO's */
1178 /* Turn on interrups */
1179 outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
1181 IRDA_DEBUG(2, "%s() speed changed to: %d\n", __func__, speed);
1186 * Function smsc_ircc_hard_xmit_fir (skb, dev)
1188 * Transmit the frame!
1191 static netdev_tx_t smsc_ircc_hard_xmit_fir(struct sk_buff *skb,
1192 struct net_device *dev)
1194 struct smsc_ircc_cb *self;
1195 unsigned long flags;
1199 IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
1200 self = netdev_priv(dev);
1201 IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;);
1203 netif_stop_queue(dev);
1205 /* Make sure test of self->io.speed & speed change are atomic */
1206 spin_lock_irqsave(&self->lock, flags);
1208 /* Check if we need to change the speed after this frame */
1209 speed = irda_get_next_speed(skb);
1210 if (speed != self->io.speed && speed != -1) {
1211 /* Check for empty frame */
1213 /* Note : you should make sure that speed changes
1214 * are not going to corrupt any outgoing frame.
1215 * Look at nsc-ircc for the gory details - Jean II */
1216 smsc_ircc_change_speed(self, speed);
1217 spin_unlock_irqrestore(&self->lock, flags);
1219 return NETDEV_TX_OK;
1222 self->new_speed = speed;
1225 skb_copy_from_linear_data(skb, self->tx_buff.head, skb->len);
1227 self->tx_buff.len = skb->len;
1228 self->tx_buff.data = self->tx_buff.head;
1230 mtt = irda_get_mtt(skb);
1235 * Compute how many BOFs (STA or PA's) we need to waste the
1236 * min turn time given the speed of the link.
1238 bofs = mtt * (self->io.speed / 1000) / 8000;
1242 smsc_ircc_dma_xmit(self, bofs);
1244 /* Transmit frame */
1245 smsc_ircc_dma_xmit(self, 0);
1248 spin_unlock_irqrestore(&self->lock, flags);
1251 return NETDEV_TX_OK;
1255 * Function smsc_ircc_dma_xmit (self, bofs)
1257 * Transmit data using DMA
1260 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs)
1262 int iobase = self->io.fir_base;
1265 IRDA_DEBUG(3, "%s\n", __func__);
1268 register_bank(iobase, 0);
1269 outb(0x00, iobase + IRCC_LCR_B);
1271 register_bank(iobase, 1);
1272 outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1273 iobase + IRCC_SCE_CFGB);
1275 self->io.direction = IO_XMIT;
1277 /* Set BOF additional count for generating the min turn time */
1278 register_bank(iobase, 4);
1279 outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO);
1280 ctrl = inb(iobase + IRCC_CONTROL) & 0xf0;
1281 outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI);
1283 /* Set max Tx frame size */
1284 outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI);
1285 outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO);
1287 /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/
1289 /* Enable burst mode chip Tx DMA */
1290 register_bank(iobase, 1);
1291 outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1292 IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1294 /* Setup DMA controller (must be done after enabling chip DMA) */
1295 irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
1298 /* Enable interrupt */
1300 register_bank(iobase, 0);
1301 outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1302 outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1304 /* Enable transmit */
1305 outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B);
1309 * Function smsc_ircc_dma_xmit_complete (self)
1311 * The transfer of a frame in finished. This function will only be called
1312 * by the interrupt handler
1315 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self)
1317 int iobase = self->io.fir_base;
1319 IRDA_DEBUG(3, "%s\n", __func__);
1322 register_bank(iobase, 0);
1323 outb(0x00, iobase + IRCC_LCR_B);
1325 register_bank(iobase, 1);
1326 outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1327 iobase + IRCC_SCE_CFGB);
1329 /* Check for underrun! */
1330 register_bank(iobase, 0);
1331 if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) {
1332 self->netdev->stats.tx_errors++;
1333 self->netdev->stats.tx_fifo_errors++;
1335 /* Reset error condition */
1336 register_bank(iobase, 0);
1337 outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER);
1338 outb(0x00, iobase + IRCC_MASTER);
1340 self->netdev->stats.tx_packets++;
1341 self->netdev->stats.tx_bytes += self->tx_buff.len;
1344 /* Check if it's time to change the speed */
1345 if (self->new_speed) {
1346 smsc_ircc_change_speed(self, self->new_speed);
1347 self->new_speed = 0;
1350 netif_wake_queue(self->netdev);
1354 * Function smsc_ircc_dma_receive(self)
1356 * Get ready for receiving a frame. The device will initiate a DMA
1357 * if it starts to receive a frame.
1360 static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self)
1362 int iobase = self->io.fir_base;
1364 /* Turn off chip DMA */
1365 register_bank(iobase, 1);
1366 outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1367 iobase + IRCC_SCE_CFGB);
1371 register_bank(iobase, 0);
1372 outb(0x00, iobase + IRCC_LCR_B);
1374 /* Turn off chip DMA */
1375 register_bank(iobase, 1);
1376 outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1377 iobase + IRCC_SCE_CFGB);
1379 self->io.direction = IO_RECV;
1380 self->rx_buff.data = self->rx_buff.head;
1382 /* Set max Rx frame size */
1383 register_bank(iobase, 4);
1384 outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI);
1385 outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO);
1387 /* Setup DMA controller */
1388 irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1391 /* Enable burst mode chip Rx DMA */
1392 register_bank(iobase, 1);
1393 outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1394 IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1396 /* Enable interrupt */
1397 register_bank(iobase, 0);
1398 outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1399 outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1401 /* Enable receiver */
1402 register_bank(iobase, 0);
1403 outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE,
1404 iobase + IRCC_LCR_B);
1410 * Function smsc_ircc_dma_receive_complete(self)
1412 * Finished with receiving frames
1415 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
1417 struct sk_buff *skb;
1418 int len, msgcnt, lsr;
1419 int iobase = self->io.fir_base;
1421 register_bank(iobase, 0);
1423 IRDA_DEBUG(3, "%s\n", __func__);
1426 register_bank(iobase, 0);
1427 outb(0x00, iobase + IRCC_LCR_B);
1429 register_bank(iobase, 0);
1430 outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR);
1431 lsr= inb(iobase + IRCC_LSR);
1432 msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
1434 IRDA_DEBUG(2, "%s: dma count = %d\n", __func__,
1435 get_dma_residue(self->io.dma));
1437 len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
1439 /* Look for errors */
1440 if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) {
1441 self->netdev->stats.rx_errors++;
1442 if (lsr & IRCC_LSR_FRAME_ERROR)
1443 self->netdev->stats.rx_frame_errors++;
1444 if (lsr & IRCC_LSR_CRC_ERROR)
1445 self->netdev->stats.rx_crc_errors++;
1446 if (lsr & IRCC_LSR_SIZE_ERROR)
1447 self->netdev->stats.rx_length_errors++;
1448 if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN))
1449 self->netdev->stats.rx_length_errors++;
1454 len -= self->io.speed < 4000000 ? 2 : 4;
1456 if (len < 2 || len > 2050) {
1457 IRDA_WARNING("%s(), bogus len=%d\n", __func__, len);
1460 IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len);
1462 skb = dev_alloc_skb(len + 1);
1464 IRDA_WARNING("%s(), memory squeeze, dropping frame.\n",
1468 /* Make sure IP header gets aligned */
1469 skb_reserve(skb, 1);
1471 memcpy(skb_put(skb, len), self->rx_buff.data, len);
1472 self->netdev->stats.rx_packets++;
1473 self->netdev->stats.rx_bytes += len;
1475 skb->dev = self->netdev;
1476 skb_reset_mac_header(skb);
1477 skb->protocol = htons(ETH_P_IRDA);
1482 * Function smsc_ircc_sir_receive (self)
1484 * Receive one frame from the infrared port
1487 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self)
1492 IRDA_ASSERT(self != NULL, return;);
1494 iobase = self->io.sir_base;
1497 * Receive all characters in Rx FIFO, unwrap and unstuff them.
1498 * async_unwrap_char will deliver all found frames
1501 async_unwrap_char(self->netdev, &self->netdev->stats, &self->rx_buff,
1502 inb(iobase + UART_RX));
1504 /* Make sure we don't stay here to long */
1505 if (boguscount++ > 32) {
1506 IRDA_DEBUG(2, "%s(), breaking!\n", __func__);
1509 } while (inb(iobase + UART_LSR) & UART_LSR_DR);
1514 * Function smsc_ircc_interrupt (irq, dev_id, regs)
1516 * An interrupt from the chip has arrived. Time to do some work
1519 static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id)
1521 struct net_device *dev = dev_id;
1522 struct smsc_ircc_cb *self = netdev_priv(dev);
1523 int iobase, iir, lcra, lsr;
1524 irqreturn_t ret = IRQ_NONE;
1526 /* Serialise the interrupt handler in various CPUs, stop Tx path */
1527 spin_lock(&self->lock);
1529 /* Check if we should use the SIR interrupt handler */
1530 if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1531 ret = smsc_ircc_interrupt_sir(dev);
1532 goto irq_ret_unlock;
1535 iobase = self->io.fir_base;
1537 register_bank(iobase, 0);
1538 iir = inb(iobase + IRCC_IIR);
1540 goto irq_ret_unlock;
1543 /* Disable interrupts */
1544 outb(0, iobase + IRCC_IER);
1545 lcra = inb(iobase + IRCC_LCR_A);
1546 lsr = inb(iobase + IRCC_LSR);
1548 IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __func__, iir);
1550 if (iir & IRCC_IIR_EOM) {
1551 if (self->io.direction == IO_RECV)
1552 smsc_ircc_dma_receive_complete(self);
1554 smsc_ircc_dma_xmit_complete(self);
1556 smsc_ircc_dma_receive(self);
1559 if (iir & IRCC_IIR_ACTIVE_FRAME) {
1560 /*printk(KERN_WARNING "%s(): Active Frame\n", __func__);*/
1563 /* Enable interrupts again */
1565 register_bank(iobase, 0);
1566 outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1569 spin_unlock(&self->lock);
1575 * Function irport_interrupt_sir (irq, dev_id)
1577 * Interrupt handler for SIR modes
1579 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
1581 struct smsc_ircc_cb *self = netdev_priv(dev);
1586 /* Already locked coming here in smsc_ircc_interrupt() */
1587 /*spin_lock(&self->lock);*/
1589 iobase = self->io.sir_base;
1591 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1595 /* Clear interrupt */
1596 lsr = inb(iobase + UART_LSR);
1598 IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
1599 __func__, iir, lsr, iobase);
1603 IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
1606 /* Receive interrupt */
1607 smsc_ircc_sir_receive(self);
1610 if (lsr & UART_LSR_THRE)
1611 /* Transmitter ready for data */
1612 smsc_ircc_sir_write_wakeup(self);
1615 IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
1620 /* Make sure we don't stay here to long */
1621 if (boguscount++ > 100)
1624 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1626 /*spin_unlock(&self->lock);*/
1633 * Function ircc_is_receiving (self)
1635 * Return TRUE is we are currently receiving a frame
1638 static int ircc_is_receiving(struct smsc_ircc_cb *self)
1643 IRDA_DEBUG(1, "%s\n", __func__);
1645 IRDA_ASSERT(self != NULL, return FALSE;);
1647 IRDA_DEBUG(0, "%s: dma count = %d\n", __func__,
1648 get_dma_residue(self->io.dma));
1650 status = (self->rx_buff.state != OUTSIDE_FRAME);
1656 static int smsc_ircc_request_irq(struct smsc_ircc_cb *self)
1660 error = request_irq(self->io.irq, smsc_ircc_interrupt, 0,
1661 self->netdev->name, self->netdev);
1663 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
1664 __func__, self->io.irq, error);
1669 static void smsc_ircc_start_interrupts(struct smsc_ircc_cb *self)
1671 unsigned long flags;
1673 spin_lock_irqsave(&self->lock, flags);
1676 smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
1678 spin_unlock_irqrestore(&self->lock, flags);
1681 static void smsc_ircc_stop_interrupts(struct smsc_ircc_cb *self)
1683 int iobase = self->io.fir_base;
1684 unsigned long flags;
1686 spin_lock_irqsave(&self->lock, flags);
1688 register_bank(iobase, 0);
1689 outb(0, iobase + IRCC_IER);
1690 outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
1691 outb(0x00, iobase + IRCC_MASTER);
1693 spin_unlock_irqrestore(&self->lock, flags);
1698 * Function smsc_ircc_net_open (dev)
1703 static int smsc_ircc_net_open(struct net_device *dev)
1705 struct smsc_ircc_cb *self;
1708 IRDA_DEBUG(1, "%s\n", __func__);
1710 IRDA_ASSERT(dev != NULL, return -1;);
1711 self = netdev_priv(dev);
1712 IRDA_ASSERT(self != NULL, return 0;);
1714 if (self->io.suspended) {
1715 IRDA_DEBUG(0, "%s(), device is suspended\n", __func__);
1719 if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
1721 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
1722 __func__, self->io.irq);
1726 smsc_ircc_start_interrupts(self);
1728 /* Give self a hardware name */
1729 /* It would be cool to offer the chip revision here - Jean II */
1730 sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base);
1733 * Open new IrLAP layer instance, now that everything should be
1734 * initialized properly
1736 self->irlap = irlap_open(dev, &self->qos, hwname);
1739 * Always allocate the DMA channel after the IRQ,
1740 * and clean up on failure.
1742 if (request_dma(self->io.dma, dev->name)) {
1743 smsc_ircc_net_close(dev);
1745 IRDA_WARNING("%s(), unable to allocate DMA=%d\n",
1746 __func__, self->io.dma);
1750 netif_start_queue(dev);
1756 * Function smsc_ircc_net_close (dev)
1761 static int smsc_ircc_net_close(struct net_device *dev)
1763 struct smsc_ircc_cb *self;
1765 IRDA_DEBUG(1, "%s\n", __func__);
1767 IRDA_ASSERT(dev != NULL, return -1;);
1768 self = netdev_priv(dev);
1769 IRDA_ASSERT(self != NULL, return 0;);
1772 netif_stop_queue(dev);
1774 /* Stop and remove instance of IrLAP */
1776 irlap_close(self->irlap);
1779 smsc_ircc_stop_interrupts(self);
1781 /* if we are called from smsc_ircc_resume we don't have IRQ reserved */
1782 if (!self->io.suspended)
1783 free_irq(self->io.irq, dev);
1785 disable_dma(self->io.dma);
1786 free_dma(self->io.dma);
1791 static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
1793 struct smsc_ircc_cb *self = platform_get_drvdata(dev);
1795 if (!self->io.suspended) {
1796 IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
1799 if (netif_running(self->netdev)) {
1800 netif_device_detach(self->netdev);
1801 smsc_ircc_stop_interrupts(self);
1802 free_irq(self->io.irq, self->netdev);
1803 disable_dma(self->io.dma);
1805 self->io.suspended = 1;
1812 static int smsc_ircc_resume(struct platform_device *dev)
1814 struct smsc_ircc_cb *self = platform_get_drvdata(dev);
1816 if (self->io.suspended) {
1817 IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
1820 smsc_ircc_init_chip(self);
1821 if (netif_running(self->netdev)) {
1822 if (smsc_ircc_request_irq(self)) {
1824 * Don't fail resume process, just kill this
1827 unregister_netdevice(self->netdev);
1829 enable_dma(self->io.dma);
1830 smsc_ircc_start_interrupts(self);
1831 netif_device_attach(self->netdev);
1834 self->io.suspended = 0;
1841 * Function smsc_ircc_close (self)
1843 * Close driver instance
1846 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
1848 IRDA_DEBUG(1, "%s\n", __func__);
1850 IRDA_ASSERT(self != NULL, return -1;);
1852 platform_device_unregister(self->pldev);
1854 /* Remove netdevice */
1855 unregister_netdev(self->netdev);
1857 smsc_ircc_stop_interrupts(self);
1859 /* Release the PORTS that this driver is using */
1860 IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__,
1863 release_region(self->io.fir_base, self->io.fir_ext);
1865 IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__,
1868 release_region(self->io.sir_base, self->io.sir_ext);
1870 if (self->tx_buff.head)
1871 dma_free_coherent(NULL, self->tx_buff.truesize,
1872 self->tx_buff.head, self->tx_buff_dma);
1874 if (self->rx_buff.head)
1875 dma_free_coherent(NULL, self->rx_buff.truesize,
1876 self->rx_buff.head, self->rx_buff_dma);
1878 free_netdev(self->netdev);
1883 static void __exit smsc_ircc_cleanup(void)
1887 IRDA_DEBUG(1, "%s\n", __func__);
1889 for (i = 0; i < 2; i++) {
1891 smsc_ircc_close(dev_self[i]);
1894 if (pnp_driver_registered)
1895 pnp_unregister_driver(&smsc_ircc_pnp_driver);
1897 platform_driver_unregister(&smsc_ircc_driver);
1901 * Start SIR operations
1903 * This function *must* be called with spinlock held, because it may
1904 * be called from the irq handler (via smsc_ircc_change_speed()). - Jean II
1906 static void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
1908 struct net_device *dev;
1909 int fir_base, sir_base;
1911 IRDA_DEBUG(3, "%s\n", __func__);
1913 IRDA_ASSERT(self != NULL, return;);
1915 IRDA_ASSERT(dev != NULL, return;);
1917 fir_base = self->io.fir_base;
1918 sir_base = self->io.sir_base;
1920 /* Reset everything */
1921 outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);
1923 #if SMSC_IRCC2_C_SIR_STOP
1924 /*smsc_ircc_sir_stop(self);*/
1927 register_bank(fir_base, 1);
1928 outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA);
1930 /* Initialize UART */
1931 outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */
1932 outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
1934 /* Turn on interrups */
1935 outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
1937 IRDA_DEBUG(3, "%s() - exit\n", __func__);
1939 outb(0x00, fir_base + IRCC_MASTER);
1942 #if SMSC_IRCC2_C_SIR_STOP
1943 void smsc_ircc_sir_stop(struct smsc_ircc_cb *self)
1947 IRDA_DEBUG(3, "%s\n", __func__);
1948 iobase = self->io.sir_base;
1951 outb(0, iobase + UART_MCR);
1953 /* Turn off interrupts */
1954 outb(0, iobase + UART_IER);
1959 * Function smsc_sir_write_wakeup (self)
1961 * Called by the SIR interrupt handler when there's room for more data.
1962 * If we have more packets to send, we send them here.
1965 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
1971 IRDA_ASSERT(self != NULL, return;);
1973 IRDA_DEBUG(4, "%s\n", __func__);
1975 iobase = self->io.sir_base;
1977 /* Finished with frame? */
1978 if (self->tx_buff.len > 0) {
1979 /* Write data left in transmit buffer */
1980 actual = smsc_ircc_sir_write(iobase, self->io.fifo_size,
1981 self->tx_buff.data, self->tx_buff.len);
1982 self->tx_buff.data += actual;
1983 self->tx_buff.len -= actual;
1986 /*if (self->tx_buff.len ==0) {*/
1989 * Now serial buffer is almost free & we can start
1990 * transmission of another packet. But first we must check
1991 * if we need to change the speed of the hardware
1993 if (self->new_speed) {
1994 IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
1995 __func__, self->new_speed);
1996 smsc_ircc_sir_wait_hw_transmitter_finish(self);
1997 smsc_ircc_change_speed(self, self->new_speed);
1998 self->new_speed = 0;
2000 /* Tell network layer that we want more frames */
2001 netif_wake_queue(self->netdev);
2003 self->netdev->stats.tx_packets++;
2005 if (self->io.speed <= 115200) {
2007 * Reset Rx FIFO to make sure that all reflected transmit data
2008 * is discarded. This is needed for half duplex operation
2010 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR;
2011 fcr |= self->io.speed < 38400 ?
2012 UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
2014 outb(fcr, iobase + UART_FCR);
2016 /* Turn on receive interrupts */
2017 outb(UART_IER_RDI, iobase + UART_IER);
2023 * Function smsc_ircc_sir_write (iobase, fifo_size, buf, len)
2025 * Fill Tx FIFO with transmit data
2028 static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
2032 /* Tx FIFO should be empty! */
2033 if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) {
2034 IRDA_WARNING("%s(), failed, fifo not empty!\n", __func__);
2038 /* Fill FIFO with current frame */
2039 while (fifo_size-- > 0 && actual < len) {
2040 /* Transmit next byte */
2041 outb(buf[actual], iobase + UART_TX);
2048 * Function smsc_ircc_is_receiving (self)
2050 * Returns true is we are currently receiving data
2053 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self)
2055 return self->rx_buff.state != OUTSIDE_FRAME;
2060 * Function smsc_ircc_probe_transceiver(self)
2062 * Tries to find the used Transceiver
2065 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self)
2069 IRDA_ASSERT(self != NULL, return;);
2071 for (i = 0; smsc_transceivers[i].name != NULL; i++)
2072 if (smsc_transceivers[i].probe(self->io.fir_base)) {
2073 IRDA_MESSAGE(" %s transceiver found\n",
2074 smsc_transceivers[i].name);
2075 self->transceiver= i + 1;
2079 IRDA_MESSAGE("No transceiver found. Defaulting to %s\n",
2080 smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name);
2082 self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER;
2087 * Function smsc_ircc_set_transceiver_for_speed(self, speed)
2089 * Set the transceiver according to the speed
2092 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed)
2096 trx = self->transceiver;
2098 smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed);
2102 * Function smsc_ircc_wait_hw_transmitter_finish ()
2104 * Wait for the real end of HW transmission
2106 * The UART is a strict FIFO, and we get called only when we have finished
2107 * pushing data to the FIFO, so the maximum amount of time we must wait
2108 * is only for the FIFO to drain out.
2110 * We use a simple calibrated loop. We may need to adjust the loop
2111 * delay (udelay) to balance I/O traffic and latency. And we also need to
2112 * adjust the maximum timeout.
2113 * It would probably be better to wait for the proper interrupt,
2114 * but it doesn't seem to be available.
2116 * We can't use jiffies or kernel timers because :
2117 * 1) We are called from the interrupt handler, which disable softirqs,
2118 * so jiffies won't be increased
2119 * 2) Jiffies granularity is usually very coarse (10ms), and we don't
2120 * want to wait that long to detect stuck hardware.
2124 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
2126 int iobase = self->io.sir_base;
2127 int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US;
2129 /* Calibrated busy loop */
2130 while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT))
2134 IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__);
2140 * REVISIT we can be told about the device by PNP, and should use that info
2141 * instead of probing hardware and creating a platform_device ...
2144 static int __init smsc_ircc_look_for_chips(void)
2146 struct smsc_chip_address *address;
2148 unsigned int cfg_base, found;
2151 address = possible_addresses;
2153 while (address->cfg_base) {
2154 cfg_base = address->cfg_base;
2156 /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __func__, cfg_base, address->type);*/
2158 if (address->type & SMSCSIO_TYPE_FDC) {
2160 if (address->type & SMSCSIO_TYPE_FLAT)
2161 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type))
2164 if (address->type & SMSCSIO_TYPE_PAGED)
2165 if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type))
2168 if (address->type & SMSCSIO_TYPE_LPC) {
2170 if (address->type & SMSCSIO_TYPE_FLAT)
2171 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type))
2174 if (address->type & SMSCSIO_TYPE_PAGED)
2175 if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type))
2184 * Function smsc_superio_flat (chip, base, type)
2186 * Try to get configuration of a smc SuperIO chip with flat register model
2189 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfgbase, char *type)
2191 unsigned short firbase, sirbase;
2195 IRDA_DEBUG(1, "%s\n", __func__);
2197 if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
2200 outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
2201 mode = inb(cfgbase + 1);
2203 /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __func__, mode);*/
2205 if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
2206 IRDA_WARNING("%s(): IrDA not enabled\n", __func__);
2208 outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
2209 sirbase = inb(cfgbase + 1) << 2;
2212 outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase);
2213 firbase = inb(cfgbase + 1) << 3;
2216 outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase);
2217 dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK;
2220 outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
2221 irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2223 IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __func__, firbase, sirbase, dma, irq, mode);
2225 if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
2228 /* Exit configuration */
2229 outb(SMSCSIO_CFGEXITKEY, cfgbase);
2235 * Function smsc_superio_paged (chip, base, type)
2237 * Try to get configuration of a smc SuperIO chip with paged register model
2240 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type)
2242 unsigned short fir_io, sir_io;
2245 IRDA_DEBUG(1, "%s\n", __func__);
2247 if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
2250 /* Select logical device (UART2) */
2251 outb(0x07, cfg_base);
2252 outb(0x05, cfg_base + 1);
2255 outb(0x60, cfg_base);
2256 sir_io = inb(cfg_base + 1) << 8;
2257 outb(0x61, cfg_base);
2258 sir_io |= inb(cfg_base + 1);
2261 outb(0x62, cfg_base);
2262 fir_io = inb(cfg_base + 1) << 8;
2263 outb(0x63, cfg_base);
2264 fir_io |= inb(cfg_base + 1);
2265 outb(0x2b, cfg_base); /* ??? */
2267 if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0)
2270 /* Exit configuration */
2271 outb(SMSCSIO_CFGEXITKEY, cfg_base);
2277 static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
2279 IRDA_DEBUG(1, "%s\n", __func__);
2281 outb(reg, cfg_base);
2282 return inb(cfg_base) != reg ? -1 : 0;
2285 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
2287 u8 devid, xdevid, rev;
2289 IRDA_DEBUG(1, "%s\n", __func__);
2291 /* Leave configuration */
2293 outb(SMSCSIO_CFGEXITKEY, cfg_base);
2295 if (inb(cfg_base) == SMSCSIO_CFGEXITKEY) /* not a smc superio chip */
2298 outb(reg, cfg_base);
2300 xdevid = inb(cfg_base + 1);
2302 /* Enter configuration */
2304 outb(SMSCSIO_CFGACCESSKEY, cfg_base);
2307 if (smsc_access(cfg_base,0x55)) /* send second key and check */
2311 /* probe device ID */
2313 if (smsc_access(cfg_base, reg))
2316 devid = inb(cfg_base + 1);
2318 if (devid == 0 || devid == 0xff) /* typical values for unused port */
2321 /* probe revision ID */
2323 if (smsc_access(cfg_base, reg + 1))
2326 rev = inb(cfg_base + 1);
2328 if (rev >= 128) /* i think this will make no sense */
2331 if (devid == xdevid) /* protection against false positives */
2334 /* Check for expected device ID; are there others? */
2336 while (chip->devid != devid) {
2340 if (chip->name == NULL)
2344 IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",
2345 devid, rev, cfg_base, type, chip->name);
2347 if (chip->rev > rev) {
2348 IRDA_MESSAGE("Revision higher than expected\n");
2352 if (chip->flags & NoIRDA)
2353 IRDA_MESSAGE("chipset does not support IRDA\n");
2358 static int __init smsc_superio_fdc(unsigned short cfg_base)
2362 if (!request_region(cfg_base, 2, driver_name)) {
2363 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
2364 __func__, cfg_base);
2366 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") ||
2367 !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC"))
2370 release_region(cfg_base, 2);
2376 static int __init smsc_superio_lpc(unsigned short cfg_base)
2380 if (!request_region(cfg_base, 2, driver_name)) {
2381 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
2382 __func__, cfg_base);
2384 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") ||
2385 !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC"))
2388 release_region(cfg_base, 2);
2394 * Look for some specific subsystem setups that need
2395 * pre-configuration not properly done by the BIOS (especially laptops)
2396 * This code is based in part on smcinit.c, tosh1800-smcinit.c
2397 * and tosh2450-smcinit.c. The table lists the device entries
2398 * for ISA bridges with an LPC (Low Pin Count) controller which
2399 * handles the communication with the SMSC device. After the LPC
2400 * controller is initialized through PCI, the SMSC device is initialized
2401 * through a dedicated port in the ISA port-mapped I/O area, this latter
2402 * area is used to configure the SMSC device with default
2403 * SIR and FIR I/O ports, DMA and IRQ. Different vendors have
2404 * used different sets of parameters and different control port
2405 * addresses making a subsystem device table necessary.
2408 static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
2410 * Subsystems needing entries:
2411 * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family
2412 * 0x10b9:0x1533 0x0e11:0x005a Compaq nc4000 family
2413 * 0x8086:0x24cc 0x0e11:0x002a HP nx9000 family
2417 .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
2419 .subvendor = 0x103c,
2420 .subdevice = 0x08bc,
2426 .preconfigure = preconfigure_through_82801,
2427 .name = "HP nx5000 family",
2430 .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
2432 .subvendor = 0x103c,
2433 .subdevice = 0x088c,
2434 /* Quite certain these are the same for nc8000 as for nc6000 */
2440 .preconfigure = preconfigure_through_82801,
2441 .name = "HP nc8000 family",
2444 .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
2446 .subvendor = 0x103c,
2447 .subdevice = 0x0890,
2453 .preconfigure = preconfigure_through_82801,
2454 .name = "HP nc6000 family",
2457 .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
2459 .subvendor = 0x0e11,
2460 .subdevice = 0x0860,
2461 /* I assume these are the same for x1000 as for the others */
2467 .preconfigure = preconfigure_through_82801,
2468 .name = "Compaq x1000 family",
2471 /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
2472 .vendor = PCI_VENDOR_ID_INTEL,
2474 .subvendor = 0x1179,
2475 .subdevice = 0xffff, /* 0xffff is "any" */
2481 .preconfigure = preconfigure_through_82801,
2482 .name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
2485 .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801CAM ISA bridge */
2487 .subvendor = 0x1179,
2488 .subdevice = 0xffff, /* 0xffff is "any" */
2494 .preconfigure = preconfigure_through_82801,
2495 .name = "Toshiba laptop with Intel 82801CAM ISA bridge",
2498 /* 82801DBM (ICH4-M) LPC Interface Bridge */
2499 .vendor = PCI_VENDOR_ID_INTEL,
2501 .subvendor = 0x1179,
2502 .subdevice = 0xffff, /* 0xffff is "any" */
2508 .preconfigure = preconfigure_through_82801,
2509 .name = "Toshiba laptop with Intel 8281DBM LPC bridge",
2512 /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
2513 .vendor = PCI_VENDOR_ID_AL,
2515 .subvendor = 0x1179,
2516 .subdevice = 0xffff, /* 0xffff is "any" */
2522 .preconfigure = preconfigure_through_ali,
2523 .name = "Toshiba laptop with ALi ISA bridge",
2530 * This sets up the basic SMSC parameters
2531 * (FIR port, SIR port, FIR DMA, FIR IRQ)
2532 * through the chip configuration port.
2534 static int __init preconfigure_smsc_chip(struct
2535 smsc_ircc_subsystem_configuration
2538 unsigned short iobase = conf->cfg_base;
2539 unsigned char tmpbyte;
2541 outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
2542 outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
2543 tmpbyte = inb(iobase +1); // Read device ID
2545 "Detected Chip id: 0x%02x, setting up registers...\n",
2548 /* Disable UART1 and set up SIR I/O port */
2549 outb(0x24, iobase); // select CR24 - UART1 base addr
2550 outb(0x00, iobase + 1); // disable UART1
2551 outb(SMSCSIOFLAT_UART2BASEADDR_REG, iobase); // select CR25 - UART2 base addr
2552 outb( (conf->sir_io >> 2), iobase + 1); // bits 2-9 of 0x3f8
2553 tmpbyte = inb(iobase + 1);
2554 if (tmpbyte != (conf->sir_io >> 2) ) {
2555 IRDA_WARNING("ERROR: could not configure SIR ioport.\n");
2556 IRDA_WARNING("Try to supply ircc_cfg argument.\n");
2560 /* Set up FIR IRQ channel for UART2 */
2561 outb(SMSCSIOFLAT_UARTIRQSELECT_REG, iobase); // select CR28 - UART1,2 IRQ select
2562 tmpbyte = inb(iobase + 1);
2563 tmpbyte &= SMSCSIOFLAT_UART1IRQSELECT_MASK; // Do not touch the UART1 portion
2564 tmpbyte |= (conf->fir_irq & SMSCSIOFLAT_UART2IRQSELECT_MASK);
2565 outb(tmpbyte, iobase + 1);
2566 tmpbyte = inb(iobase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2567 if (tmpbyte != conf->fir_irq) {
2568 IRDA_WARNING("ERROR: could not configure FIR IRQ channel.\n");
2572 /* Set up FIR I/O port */
2573 outb(SMSCSIOFLAT_FIRBASEADDR_REG, iobase); // CR2B - SCE (FIR) base addr
2574 outb((conf->fir_io >> 3), iobase + 1);
2575 tmpbyte = inb(iobase + 1);
2576 if (tmpbyte != (conf->fir_io >> 3) ) {
2577 IRDA_WARNING("ERROR: could not configure FIR I/O port.\n");
2581 /* Set up FIR DMA channel */
2582 outb(SMSCSIOFLAT_FIRDMASELECT_REG, iobase); // CR2C - SCE (FIR) DMA select
2583 outb((conf->fir_dma & LPC47N227_FIRDMASELECT_MASK), iobase + 1); // DMA
2584 tmpbyte = inb(iobase + 1) & LPC47N227_FIRDMASELECT_MASK;
2585 if (tmpbyte != (conf->fir_dma & LPC47N227_FIRDMASELECT_MASK)) {
2586 IRDA_WARNING("ERROR: could not configure FIR DMA channel.\n");
2590 outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase); // CR0C - UART mode
2591 tmpbyte = inb(iobase + 1);
2592 tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK |
2593 SMSCSIOFLAT_UART2MODE_VAL_IRDA;
2594 outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed
2596 outb(LPC47N227_APMBOOTDRIVE_REG, iobase); // CR07 - Auto Pwr Mgt/boot drive sel
2597 tmpbyte = inb(iobase + 1);
2598 outb(tmpbyte | LPC47N227_UART2AUTOPWRDOWN_MASK, iobase + 1); // enable UART2 autopower down
2600 /* This one was not part of tosh1800 */
2601 outb(0x0a, iobase); // CR0a - ecp fifo / ir mux
2602 tmpbyte = inb(iobase + 1);
2603 outb(tmpbyte | 0x40, iobase + 1); // send active device to ir port
2605 outb(LPC47N227_UART12POWER_REG, iobase); // CR02 - UART 1,2 power
2606 tmpbyte = inb(iobase + 1);
2607 outb(tmpbyte | LPC47N227_UART2POWERDOWN_MASK, iobase + 1); // UART2 power up mode, UART1 power down
2609 outb(LPC47N227_FDCPOWERVALIDCONF_REG, iobase); // CR00 - FDC Power/valid config cycle
2610 tmpbyte = inb(iobase + 1);
2611 outb(tmpbyte | LPC47N227_VALID_MASK, iobase + 1); // valid config cycle done
2613 outb(LPC47N227_CFGEXITKEY, iobase); // Exit configuration
2618 /* 82801CAM generic registers */
2621 #define PIRQ_A_D_ROUT 0x60
2622 #define SIRQ_CNTL 0x64
2623 #define PIRQ_E_H_ROUT 0x68
2624 #define PCI_DMA_C 0x90
2625 /* LPC-specific registers */
2626 #define COM_DEC 0xe0
2627 #define GEN1_DEC 0xe4
2629 #define GEN2_DEC 0xec
2631 * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge
2632 * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
2633 * They all work the same way!
2635 static int __init preconfigure_through_82801(struct pci_dev *dev,
2637 smsc_ircc_subsystem_configuration
2640 unsigned short tmpword;
2641 unsigned char tmpbyte;
2643 IRDA_MESSAGE("Setting up Intel 82801 controller and SMSC device\n");
2645 * Select the range for the COMA COM port (SIR)
2648 * Bit 6-4, COMB decode range
2650 * Bit 2-0, COMA decode range
2653 * 000 = 0x3f8-0x3ff (COM1)
2654 * 001 = 0x2f8-0x2ff (COM2)
2658 * 101 = 0x2e8-0x2ef (COM4)
2660 * 111 = 0x3e8-0x3ef (COM3)
2662 pci_read_config_byte(dev, COM_DEC, &tmpbyte);
2663 tmpbyte &= 0xf8; /* mask COMA bits */
2664 switch(conf->sir_io) {
2690 tmpbyte |= 0x01; /* COM2 default */
2692 IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
2693 pci_write_config_byte(dev, COM_DEC, tmpbyte);
2695 /* Enable Low Pin Count interface */
2696 pci_read_config_word(dev, LPC_EN, &tmpword);
2697 /* These seem to be set up at all times,
2698 * just make sure it is properly set.
2700 switch(conf->cfg_base) {
2714 IRDA_WARNING("Uncommon I/O base address: 0x%04x\n",
2718 tmpword &= 0xfffd; /* disable LPC COMB */
2719 tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
2720 IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword);
2721 pci_write_config_word(dev, LPC_EN, tmpword);
2724 * Configure LPC DMA channel
2726 * Bit 15-14: DMA channel 7 select
2727 * Bit 13-12: DMA channel 6 select
2728 * Bit 11-10: DMA channel 5 select
2730 * Bit 7-6: DMA channel 3 select
2731 * Bit 5-4: DMA channel 2 select
2732 * Bit 3-2: DMA channel 1 select
2733 * Bit 1-0: DMA channel 0 select
2734 * 00 = Reserved value
2736 * 10 = Reserved value
2739 pci_read_config_word(dev, PCI_DMA_C, &tmpword);
2740 switch(conf->fir_dma) {
2763 break; /* do not change settings */
2765 IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword);
2766 pci_write_config_word(dev, PCI_DMA_C, tmpword);
2770 * Bit 15-4: Generic I/O range
2771 * Bit 3-1: reserved (read as 0)
2772 * Bit 0: enable GEN2 range on LPC I/F
2774 tmpword = conf->fir_io & 0xfff8;
2776 IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword);
2777 pci_write_config_word(dev, GEN2_DEC, tmpword);
2779 /* Pre-configure chip */
2780 return preconfigure_smsc_chip(conf);
2784 * Pre-configure a certain port on the ALi 1533 bridge.
2785 * This is based on reverse-engineering since ALi does not
2786 * provide any data sheet for the 1533 chip.
2788 static void __init preconfigure_ali_port(struct pci_dev *dev,
2789 unsigned short port)
2792 /* These bits obviously control the different ports */
2794 unsigned char tmpbyte;
2815 IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port);
2819 pci_read_config_byte(dev, reg, &tmpbyte);
2820 /* Turn on the right bits */
2822 pci_write_config_byte(dev, reg, tmpbyte);
2823 IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
2826 static int __init preconfigure_through_ali(struct pci_dev *dev,
2828 smsc_ircc_subsystem_configuration
2831 /* Configure the two ports on the ALi 1533 */
2832 preconfigure_ali_port(dev, conf->sir_io);
2833 preconfigure_ali_port(dev, conf->fir_io);
2835 /* Pre-configure chip */
2836 return preconfigure_smsc_chip(conf);
2839 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
2840 unsigned short ircc_fir,
2841 unsigned short ircc_sir,
2842 unsigned char ircc_dma,
2843 unsigned char ircc_irq)
2845 struct pci_dev *dev = NULL;
2846 unsigned short ss_vendor = 0x0000;
2847 unsigned short ss_device = 0x0000;
2850 for_each_pci_dev(dev) {
2851 struct smsc_ircc_subsystem_configuration *conf;
2854 * Cache the subsystem vendor/device:
2855 * some manufacturers fail to set this for all components,
2856 * so we save it in case there is just 0x0000 0x0000 on the
2857 * device we want to check.
2859 if (dev->subsystem_vendor != 0x0000U) {
2860 ss_vendor = dev->subsystem_vendor;
2861 ss_device = dev->subsystem_device;
2863 conf = subsystem_configurations;
2864 for( ; conf->subvendor; conf++) {
2865 if(conf->vendor == dev->vendor &&
2866 conf->device == dev->device &&
2867 conf->subvendor == ss_vendor &&
2868 /* Sometimes these are cached values */
2869 (conf->subdevice == ss_device ||
2870 conf->subdevice == 0xffff)) {
2871 struct smsc_ircc_subsystem_configuration
2874 memcpy(&tmpconf, conf,
2875 sizeof(struct smsc_ircc_subsystem_configuration));
2878 * Override the default values with anything
2879 * passed in as parameter
2882 tmpconf.cfg_base = ircc_cfg;
2884 tmpconf.fir_io = ircc_fir;
2886 tmpconf.sir_io = ircc_sir;
2887 if (ircc_dma != DMA_INVAL)
2888 tmpconf.fir_dma = ircc_dma;
2889 if (ircc_irq != IRQ_INVAL)
2890 tmpconf.fir_irq = ircc_irq;
2892 IRDA_MESSAGE("Detected unconfigured %s SMSC IrDA chip, pre-configuring device.\n", conf->name);
2893 if (conf->preconfigure)
2894 ret = conf->preconfigure(dev, &tmpconf);
2903 #endif // CONFIG_PCI
2905 /************************************************
2907 * Transceivers specific functions
2909 ************************************************/
2913 * Function smsc_ircc_set_transceiver_smsc_ircc_atc(fir_base, speed)
2915 * Program transceiver through smsc-ircc ATC circuitry
2919 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
2921 unsigned long jiffies_now, jiffies_timeout;
2924 jiffies_now = jiffies;
2925 jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES;
2928 register_bank(fir_base, 4);
2929 outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE,
2930 fir_base + IRCC_ATC);
2932 while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) &&
2933 !time_after(jiffies, jiffies_timeout))
2937 IRDA_WARNING("%s(): ATC: 0x%02x\n", __func__,
2938 inb(fir_base + IRCC_ATC));
2942 * Function smsc_ircc_probe_transceiver_smsc_ircc_atc(fir_base)
2944 * Probe transceiver smsc-ircc ATC circuitry
2948 static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base)
2954 * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed)
2960 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed)
2971 fast_mode = IRCC_LCR_A_FAST;
2974 register_bank(fir_base, 0);
2975 outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A);
2979 * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base)
2985 static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base)
2991 * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed)
2997 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed)
3008 fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA;
3012 /* This causes an interrupt */
3013 register_bank(fir_base, 0);
3014 outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A);
3018 * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base)
3024 static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base)
3030 module_init(smsc_ircc_init);
3031 module_exit(smsc_ircc_cleanup);