]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/net/pcmcia/ibmtr_cs.c
pcmcia: remove cs_types.h
[karo-tx-linux.git] / drivers / net / pcmcia / ibmtr_cs.c
1 /*======================================================================
2
3     A PCMCIA token-ring driver for IBM-based cards
4
5     This driver supports the IBM PCMCIA Token-Ring Card.
6     Written by Steve Kipisz, kipisz@vnet.ibm.com or
7                              bungy@ibm.net
8
9     Written 1995,1996.
10
11     This code is based on pcnet_cs.c from David Hinds.
12     
13     V2.2.0 February 1999 - Mike Phillips phillim@amtrak.com
14
15     Linux V2.2.x presented significant changes to the underlying
16     ibmtr.c code.  Mainly the code became a lot more organized and
17     modular.
18
19     This caused the old PCMCIA Token Ring driver to give up and go 
20     home early. Instead of just patching the old code to make it 
21     work, the PCMCIA code has been streamlined, updated and possibly
22     improved.
23
24     This code now only contains code required for the Card Services.
25     All we do here is set the card up enough so that the real ibmtr.c
26     driver can find it and work with it properly.
27
28     i.e. We set up the io port, irq, mmio memory and shared ram
29     memory.  This enables ibmtr_probe in ibmtr.c to find the card and
30     configure it as though it was a normal ISA and/or PnP card.
31
32     CHANGES
33
34     v2.2.5 April 1999 Mike Phillips (phillim@amtrak.com)
35     Obscure bug fix, required changed to ibmtr.c not ibmtr_cs.c
36     
37     v2.2.7 May 1999 Mike Phillips (phillim@amtrak.com)
38     Updated to version 2.2.7 to match the first version of the kernel
39     that the modification to ibmtr.c were incorporated into.
40     
41     v2.2.17 July 2000 Burt Silverman (burts@us.ibm.com)
42     Address translation feature of PCMCIA controller is usable so
43     memory windows can be placed in High memory (meaning above
44     0xFFFFF.)
45
46 ======================================================================*/
47
48 #include <linux/kernel.h>
49 #include <linux/init.h>
50 #include <linux/ptrace.h>
51 #include <linux/slab.h>
52 #include <linux/string.h>
53 #include <linux/timer.h>
54 #include <linux/module.h>
55 #include <linux/ethtool.h>
56 #include <linux/netdevice.h>
57 #include <linux/trdevice.h>
58 #include <linux/ibmtr.h>
59
60 #include <pcmcia/cs.h>
61 #include <pcmcia/cistpl.h>
62 #include <pcmcia/ds.h>
63
64 #include <asm/uaccess.h>
65 #include <asm/io.h>
66 #include <asm/system.h>
67
68 #define PCMCIA
69 #include "../tokenring/ibmtr.c"
70
71
72 /*====================================================================*/
73
74 /* Parameters that can be set with 'insmod' */
75
76 /* MMIO base address */
77 static u_long mmiobase = 0xce000;
78
79 /* SRAM base address */
80 static u_long srambase = 0xd0000;
81
82 /* SRAM size 8,16,32,64 */
83 static u_long sramsize = 64;
84
85 /* Ringspeed 4,16 */
86 static int ringspeed = 16;
87
88 module_param(mmiobase, ulong, 0);
89 module_param(srambase, ulong, 0);
90 module_param(sramsize, ulong, 0);
91 module_param(ringspeed, int, 0);
92 MODULE_LICENSE("GPL");
93
94 /*====================================================================*/
95
96 static int ibmtr_config(struct pcmcia_device *link);
97 static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase);
98 static void ibmtr_release(struct pcmcia_device *link);
99 static void ibmtr_detach(struct pcmcia_device *p_dev);
100
101 /*====================================================================*/
102
103 typedef struct ibmtr_dev_t {
104         struct pcmcia_device    *p_dev;
105     struct net_device   *dev;
106     window_handle_t     sram_win_handle;
107     struct tok_info     *ti;
108 } ibmtr_dev_t;
109
110 static void netdev_get_drvinfo(struct net_device *dev,
111                                struct ethtool_drvinfo *info)
112 {
113         strcpy(info->driver, "ibmtr_cs");
114 }
115
116 static const struct ethtool_ops netdev_ethtool_ops = {
117         .get_drvinfo            = netdev_get_drvinfo,
118 };
119
120 static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) {
121         ibmtr_dev_t *info = dev_id;
122         struct net_device *dev = info->dev;
123         return tok_interrupt(irq, dev);
124 };
125
126 /*======================================================================
127
128     ibmtr_attach() creates an "instance" of the driver, allocating
129     local data structures for one device.  The device is registered
130     with Card Services.
131
132 ======================================================================*/
133
134 static int __devinit ibmtr_attach(struct pcmcia_device *link)
135 {
136     ibmtr_dev_t *info;
137     struct net_device *dev;
138
139     dev_dbg(&link->dev, "ibmtr_attach()\n");
140
141     /* Create new token-ring device */
142     info = kzalloc(sizeof(*info), GFP_KERNEL);
143     if (!info) return -ENOMEM;
144     dev = alloc_trdev(sizeof(struct tok_info));
145     if (!dev) {
146         kfree(info);
147         return -ENOMEM;
148     }
149
150     info->p_dev = link;
151     link->priv = info;
152     info->ti = netdev_priv(dev);
153
154     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
155     link->io.NumPorts1 = 4;
156     link->io.IOAddrLines = 16;
157     link->conf.Attributes = CONF_ENABLE_IRQ;
158     link->conf.IntType = INT_MEMORY_AND_IO;
159     link->conf.Present = PRESENT_OPTION;
160
161     info->dev = dev;
162
163     SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
164
165     return ibmtr_config(link);
166 } /* ibmtr_attach */
167
168 /*======================================================================
169
170     This deletes a driver "instance".  The device is de-registered
171     with Card Services.  If it has been released, all local data
172     structures are freed.  Otherwise, the structures will be freed
173     when the device is released.
174
175 ======================================================================*/
176
177 static void ibmtr_detach(struct pcmcia_device *link)
178 {
179     struct ibmtr_dev_t *info = link->priv;
180     struct net_device *dev = info->dev;
181      struct tok_info *ti = netdev_priv(dev);
182
183     dev_dbg(&link->dev, "ibmtr_detach\n");
184     
185     /* 
186      * When the card removal interrupt hits tok_interrupt(), 
187      * bail out early, so we don't crash the machine 
188      */
189     ti->sram_phys |= 1;
190
191     unregister_netdev(dev);
192     
193     del_timer_sync(&(ti->tr_timer));
194
195     ibmtr_release(link);
196
197     free_netdev(dev);
198     kfree(info);
199 } /* ibmtr_detach */
200
201 /*======================================================================
202
203     ibmtr_config() is scheduled to run after a CARD_INSERTION event
204     is received, to configure the PCMCIA socket, and to make the
205     token-ring device available to the system.
206
207 ======================================================================*/
208
209 static int __devinit ibmtr_config(struct pcmcia_device *link)
210 {
211     ibmtr_dev_t *info = link->priv;
212     struct net_device *dev = info->dev;
213     struct tok_info *ti = netdev_priv(dev);
214     win_req_t req;
215     memreq_t mem;
216     int i, ret;
217
218     dev_dbg(&link->dev, "ibmtr_config\n");
219
220     link->conf.ConfigIndex = 0x61;
221
222     /* Determine if this is PRIMARY or ALTERNATE. */
223
224     /* Try PRIMARY card at 0xA20-0xA23 */
225     link->io.BasePort1 = 0xA20;
226     i = pcmcia_request_io(link, &link->io);
227     if (i != 0) {
228         /* Couldn't get 0xA20-0xA23.  Try ALTERNATE at 0xA24-0xA27. */
229         link->io.BasePort1 = 0xA24;
230         ret = pcmcia_request_io(link, &link->io);
231         if (ret)
232                 goto failed;
233     }
234     dev->base_addr = link->io.BasePort1;
235
236     ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt);
237     if (ret)
238             goto failed;
239     dev->irq = link->irq;
240     ti->irq = link->irq;
241     ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq);
242
243     /* Allocate the MMIO memory window */
244     req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
245     req.Attributes |= WIN_USE_WAIT;
246     req.Base = 0; 
247     req.Size = 0x2000;
248     req.AccessSpeed = 250;
249     ret = pcmcia_request_window(link, &req, &link->win);
250     if (ret)
251             goto failed;
252
253     mem.CardOffset = mmiobase;
254     mem.Page = 0;
255     ret = pcmcia_map_mem_page(link, link->win, &mem);
256     if (ret)
257             goto failed;
258     ti->mmio = ioremap(req.Base, req.Size);
259
260     /* Allocate the SRAM memory window */
261     req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
262     req.Attributes |= WIN_USE_WAIT;
263     req.Base = 0;
264     req.Size = sramsize * 1024;
265     req.AccessSpeed = 250;
266     ret = pcmcia_request_window(link, &req, &info->sram_win_handle);
267     if (ret)
268             goto failed;
269
270     mem.CardOffset = srambase;
271     mem.Page = 0;
272     ret = pcmcia_map_mem_page(link, info->sram_win_handle, &mem);
273     if (ret)
274             goto failed;
275
276     ti->sram_base = mem.CardOffset >> 12;
277     ti->sram_virt = ioremap(req.Base, req.Size);
278     ti->sram_phys = req.Base;
279
280     ret = pcmcia_request_configuration(link, &link->conf);
281     if (ret)
282             goto failed;
283
284     /*  Set up the Token-Ring Controller Configuration Register and
285         turn on the card.  Check the "Local Area Network Credit Card
286         Adapters Technical Reference"  SC30-3585 for this info.  */
287     ibmtr_hw_setup(dev, mmiobase);
288
289     SET_NETDEV_DEV(dev, &link->dev);
290
291     i = ibmtr_probe_card(dev);
292     if (i != 0) {
293         printk(KERN_NOTICE "ibmtr_cs: register_netdev() failed\n");
294         goto failed;
295     }
296
297     printk(KERN_INFO
298            "%s: port %#3lx, irq %d,  mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
299            dev->name, dev->base_addr, dev->irq,
300            (u_long)ti->mmio, (u_long)(ti->sram_base << 12),
301            dev->dev_addr);
302     return 0;
303
304 failed:
305     ibmtr_release(link);
306     return -ENODEV;
307 } /* ibmtr_config */
308
309 /*======================================================================
310
311     After a card is removed, ibmtr_release() will unregister the net
312     device, and release the PCMCIA configuration.  If the device is
313     still open, this will be postponed until it is closed.
314
315 ======================================================================*/
316
317 static void ibmtr_release(struct pcmcia_device *link)
318 {
319         ibmtr_dev_t *info = link->priv;
320         struct net_device *dev = info->dev;
321
322         dev_dbg(&link->dev, "ibmtr_release\n");
323
324         if (link->win) {
325                 struct tok_info *ti = netdev_priv(dev);
326                 iounmap(ti->mmio);
327                 pcmcia_release_window(link, info->sram_win_handle);
328         }
329         pcmcia_disable_device(link);
330 }
331
332 static int ibmtr_suspend(struct pcmcia_device *link)
333 {
334         ibmtr_dev_t *info = link->priv;
335         struct net_device *dev = info->dev;
336
337         if (link->open)
338                 netif_device_detach(dev);
339
340         return 0;
341 }
342
343 static int __devinit ibmtr_resume(struct pcmcia_device *link)
344 {
345         ibmtr_dev_t *info = link->priv;
346         struct net_device *dev = info->dev;
347
348         if (link->open) {
349                 ibmtr_probe(dev);       /* really? */
350                 netif_device_attach(dev);
351         }
352
353         return 0;
354 }
355
356
357 /*====================================================================*/
358
359 static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase)
360 {
361     int i;
362
363     /* Bizarre IBM behavior, there are 16 bits of information we
364        need to set, but the card only allows us to send 4 bits at a 
365        time.  For each byte sent to base_addr, bits 7-4 tell the
366        card which part of the 16 bits we are setting, bits 3-0 contain 
367        the actual information */
368
369     /* First nibble provides 4 bits of mmio */
370     i = (mmiobase >> 16) & 0x0F;
371     outb(i, dev->base_addr);
372
373     /* Second nibble provides 3 bits of mmio */
374     i = 0x10 | ((mmiobase >> 12) & 0x0E);
375     outb(i, dev->base_addr);
376
377     /* Third nibble, hard-coded values */
378     i = 0x26;
379     outb(i, dev->base_addr);
380
381     /* Fourth nibble sets shared ram page size */
382
383     /* 8 = 00, 16 = 01, 32 = 10, 64 = 11 */          
384     i = (sramsize >> 4) & 0x07;
385     i = ((i == 4) ? 3 : i) << 2;
386     i |= 0x30;
387
388     if (ringspeed == 16)
389         i |= 2;
390     if (dev->base_addr == 0xA24)
391         i |= 1;
392     outb(i, dev->base_addr);
393
394     /* 0x40 will release the card for use */
395     outb(0x40, dev->base_addr);
396 }
397
398 static struct pcmcia_device_id ibmtr_ids[] = {
399         PCMCIA_DEVICE_PROD_ID12("3Com", "TokenLink Velocity PC Card", 0x41240e5b, 0x82c3734e),
400         PCMCIA_DEVICE_PROD_ID12("IBM", "TOKEN RING", 0xb569a6e5, 0xbf8eed47),
401         PCMCIA_DEVICE_NULL,
402 };
403 MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids);
404
405 static struct pcmcia_driver ibmtr_cs_driver = {
406         .owner          = THIS_MODULE,
407         .drv            = {
408                 .name   = "ibmtr_cs",
409         },
410         .probe          = ibmtr_attach,
411         .remove         = ibmtr_detach,
412         .id_table       = ibmtr_ids,
413         .suspend        = ibmtr_suspend,
414         .resume         = ibmtr_resume,
415 };
416
417 static int __init init_ibmtr_cs(void)
418 {
419         return pcmcia_register_driver(&ibmtr_cs_driver);
420 }
421
422 static void __exit exit_ibmtr_cs(void)
423 {
424         pcmcia_unregister_driver(&ibmtr_cs_driver);
425 }
426
427 module_init(init_ibmtr_cs);
428 module_exit(exit_ibmtr_cs);